Victorious · Land Rover · Cooling System Parts
2.2 Diesel Turbo Oil Cooler Pipe & Water Inlet Connector
OE-spec replacement for Freelander LR2, Range Rover Evoque & Discovery Sport – direct fit, tested performance.
Freelander LR2
Range Rover Evoque
Discovery Sport
2006–2020
2.2L TD4 Diesel
Direct Replacement
Overview
The cooling system on your Freelander LR2, Range Rover Evoque, or Discovery Sport is engineered to manage heat under demanding conditions. The oil cooler pipe and water inlet connector are critical interfaces that regulate oil temperature and prevent overheating—especially important in turbo diesel engines running at full capacity.
This OE-specification replacement connector restores original functionality if your existing unit shows signs of age, minor corrosion, or reduced cooling efficiency. Engineered to the same tolerances and materials as the factory original (OEM LR021623), it integrates seamlessly into your existing cooling circuit with zero modifications.
Whether you're replacing a worn component proactively or addressing a known fault, this connector delivers reliable, consistent performance for the lifespan of your vehicle.
What's Included
🔧
Oil Cooler Pipe Assembly
Complete connector unit with water inlet stub
✓
Installation-Ready
Pre-assembled, no modification required
📋
OE Specification
Matches factory tolerances and material composition
📌
Part Numbers Included
LR021623, 6G9Q6N793AA
Product Highlights
-
OE-Spec Design – Engineered to original equipment standards for Freelander LR2, Evoque, Discovery Sport
-
2.2L TD4 Turbo Diesel – Optimized for single-turbo applications on these engines
-
Direct Fit Installation – No modifications, no adapters, no guesswork
-
Proven Reliability – Aftermarket-tested and OE-quality options available
-
Thermal Stability – Manages oil and coolant flow under full-load conditions
-
Corrosion Resistance – Durable materials for long service life
-
Cost-Effective Replacement – Fraction of dealer pricing, same performance
-
Warranty Backed – 1-year manufacturer's guarantee included
-
Easy Sourcing – Cross-referenced to multiple OEM part numbers
-
Cooling Efficiency – Restores optimal heat dissipation immediately
Compatibility & Fitment
| Vehicle Model |
Year Range |
Engine |
Fitment |
| Land Rover Freelander 2 (LR2) |
2006–2014 |
2.2L TD4 Single Turbo |
Direct Fit |
| Range Rover Evoque |
2012–2020 |
2.2L TD4 Single Turbo |
Direct Fit |
| Land Rover Discovery Sport |
2015–2020 |
2.2L TD4 Single Turbo |
Direct Fit |
| Other engines / models |
N/A |
Non-2.2L TD4 |
Not Compatible |
⚠ Tip: Verify your engine code and compare part number LR021623 or 6G9Q6N793AA to your existing connector before purchasing. If unsure, contact our team via +44 203 943 9919 (Mon–Fri 9am–7pm) with your vehicle's VIN.
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
-
Drain Engine Oil & Coolant: Allow the engine to cool completely. Open the drain plugs and catch waste fluid in a suitable container. Dispose of responsibly.
-
Remove Existing Connector: Locate the oil cooler pipe connector on the engine block. Unbolt or unclip it (typically 2–3 fasteners). Note the hose routing before disconnection.
-
Disconnect Hoses: Gently remove inlet and outlet hoses. Some coolant residue may drip—have clean cloths ready.
-
Install New Connector: Position the replacement unit in the same orientation. Align mounting holes and insert bolts. Tighten firmly but do not over-torque.
-
Reconnect Hoses: Reattach inlet and outlet hoses in their original positions. Check clamps are tight and secure.
-
Refill Fluids: Pour fresh engine oil and coolant back into the system according to specification (refer to your service manual for correct volumes and grades).
-
Bleed Air: Start the engine and run at idle for 2–3 minutes. Look for leaks around the new connector and hose joints. Top up coolant as needed.
-
Test & Monitor: Drive gently for the first 10 km to confirm stable temperature readings. Check under the bonnet once more after 20 km.
⚠ Important: Do not start the engine with low coolant levels. Always dispose of used oil and coolant at a licensed recycling facility—never pour down the drain. If you're unfamiliar with cooling system work, have a qualified technician complete this job to avoid air locks or contamination.
Why Choose Victorious
We've been the trusted source for Land Rover, Range Rover, and Defender owners since 2014. This oil cooler connector is stocked, tested, and backed by our 30-day money-back guarantee. Our team knows these vehicles inside out—and we're here to help you keep yours in peak condition.
Ready to Restore Your Cooling System?
OE-spec oil cooler connector for Freelander LR2, Range Rover Evoque & Discovery Sport. Direct fit, one-year warranty, ships worldwide.
Shop Now
Use code 22GET20 – save 20% on any 2 items
⭐
4.9/5 · 12,300+ Reviews
🌍
Worldwide Shipping · DHL, FedEx, UPS, TNT
📞
+44 203 943 9919 · Mon–Fri 9am–7pm
✓
30-Day Money-Back Guarantee
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names, logos, and vehicle designations are the property of their respective owners. This product is an aftermarket replacement component designed for compatibility with the specified vehicles and is sold as-is for personal, non-commercial use.
