Victorious · Cooling System · OEM Parts
2.0L Petrol Thermostat Water Outlet Connector
Premium OEM-specification cooling outlet fitting for Land Rover Freelander, Range Rover Evoque, Discovery Sport, Volvo, and Ford EcoBoost engines.
2.0L Petrol
Multi-Brand Compatible
Direct Fit
OEM Spec
12-Month Warranty
Overview
This thermostat water outlet connector is engineered for 2.0-litre petrol engines found across Land Rover Freelander LR2, Range Rover Evoque, Discovery Sport, Volvo V60/V70, and select Ford applications. A critical component in the cooling circuit, the outlet connector directs coolant flow between the thermostat housing and radiator hose, maintaining precise engine temperature regulation.
Partsmost supplies this part to OEM specification, using high-grade materials to ensure durability and reliable performance under thermal stress. Whether you're undertaking routine cooling system maintenance or replacing a failed connector, this genuine-equivalent part delivers the integrity your Land Rover demands.
Every connector undergoes quality assurance and ships with a full 12-month warranty. Direct fit to original Land Rover and Volvo equipment numbers ensures compatibility without modification or fitment risk.
What's Included
📦
1x Water Outlet Connector
OEM-spec cooling circuit component
✓
12-Month Warranty
Full parts coverage from Victorious
📋
Installation Guide
Detailed fitment instructions included
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT delivery options
Product Highlights
- OEM Quality Material – Cast to original equipment specifications
- Direct Fit Design – No modification required for Land Rover, Volvo, Ford engines
- Thermal Durability – Engineered for sustained high-temperature cycles
- Lightweight Construction – Approximately 0.2kg; minimal impact on vehicle weight
- Multi-Brand Compatibility – Fits Freelander LR2, Evoque, Discovery Sport, Volvo V60/V70, Ford Edge/Escape/Explorer/Focus/Fusion/Taurus, Lincoln MKC/MKT/MKZ
- OEM Part Numbers Supported – LR025564, LR038758, 31422105, CJ5Z8K556A
- Fast Installation – No specialised tools required; straightforward swap procedure
- 12-Month Warranty – Full defect coverage; exceptional peace of mind
- No Chemical Hazards – Non-toxic, safe for all environments
- Stock Ready – Tested and inspected before dispatch
Compatibility
| Vehicle Model |
Year Range |
Engine |
Fit Status |
| Land Rover Freelander LR2 |
2006–2014 |
2.0L Petrol EcoBoost |
Direct Fit |
| Range Rover Evoque |
2012 Onward |
2.0L Petrol |
Direct Fit |
| Land Rover Discovery Sport |
2015 Onward |
2.0L Petrol |
Direct Fit |
| Volvo V60 / V70 |
2010 Onward |
2.0L Petrol T5 |
Direct Fit |
| Volvo S60 / S80 / S80L |
2010 Onward |
2.0L Petrol T5 |
Direct Fit |
| Ford Edge |
2009–2018 |
2.0L EcoBoost |
Direct Fit |
| Ford Escape |
2008 Onward |
2.0L EcoBoost |
Direct Fit |
| Ford Explorer |
2011 Onward |
2.0L EcoBoost |
Direct Fit |
| Ford Focus / Fusion / Taurus |
2012 Onward |
2.0L EcoBoost |
Direct Fit |
| Lincoln MKC / MKT / MKZ |
2013 Onward |
2.0L EcoBoost |
Direct Fit |
Verify Your Part Number: Before ordering, confirm that your existing connector matches one of these OEM numbers: LR025564, LR038758, 31422105, or CJ5Z8K556A. If unsure, contact our team on +44 203 943 9919 with your VIN.
Installation
Thermostat Outlet Connector Replacement – 2.0L Petrol Engines
Difficulty: Intermediate | Time Required: 30–45 minutes | Tools Needed: Socket set, coolant drain pan, torque wrench
-
Drain Cooling System: Allow engine to cool completely. Open the radiator drain plug and capture coolant in a clean pan for reuse or disposal per local environmental standards.
-
Locate Outlet Connector: The thermostat housing sits near the top of the engine block. Identify the water outlet connector—typically a small plastic or metal fitting joining the housing to the upper radiator hose.
-
Disconnect Hose & Clamps: Loosen the radiator hose clamp and gently pull the hose free. Use a socket to remove the connector bolts (usually M12–M16, typically 20–25 Nm torque).
-
Remove Old Connector: Carefully extract the failing connector. Clean the mating surface of the thermostat housing with a soft cloth to remove coolant residue and old gasket material.
-
Install New Connector: Position the new Partsmost outlet connector and hand-thread the bolts. Tighten in a cross pattern to the correct torque specification (typically 20–25 Nm; refer to your vehicle's service manual).
-
Reconnect Hose: Reattach the upper radiator hose, ensuring the clamp is seated properly. Tighten the clamp to finger-tight-plus-a-quarter-turn to avoid over-torquing.
-
Refill Cooling System: Pour fresh coolant (or recovered original coolant) into the radiator to the proper level. Run the engine at idle for 2–3 minutes, watching for leaks around the new connector. Top up if needed.
-
Bleed Air Pockets: Most modern cooling systems self-bleed, but if your vehicle has a bleed nipple on the thermostat housing or upper hose, crack it open briefly to expel trapped air.
-
Test & Verify: Allow the engine to cool, then perform a final visual inspection around the connector for any seepage. Take a short test drive to confirm normal temperature gauge operation.
Important: Never loosen the radiator cap or drain coolant from a warm engine—severe burns can result. Use OEM-grade coolant appropriate to your vehicle's specification. Do not mix coolant types. If the replacement connector continues to leak, stop immediately and inspect for cross-threading or internal damage.
Complete Your Cooling System Upgrade
Thermostat water outlet connectors fail silently and without warning, leading to coolant loss and potential engine damage. This OEM-specification replacement restores thermal integrity and prevents costly overheating repairs. Order today with confidence.
Add to Cart
Use code 22GET20 for 20% off any 2 items in your order.
4.9★ 12,300+ verified reviews
30-Day money-back guarantee
Worldwide DHL / FedEx shipping
12-Month full warranty included
Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm GMT)
Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), Ford Motor Company, Volvo Car Corporation, or Lincoln. All vehicle names, logos, and part references are used for identification purposes only. This product meets or exceeds OEM specification and is designed for compatibility with original equipment. Always verify part numbers before purchase. Your use of this product is at your own risk; we recommend professional installation by a qualified technician where appropriate.
