Best selling products

Victorious · Mercedes G-Class · Exterior Mercedes G-Class Brabus Front License Plate Holder – Carbon Fiber ABS (1990–2018) Premium carbon fiber style front license plate surround engineered for authentic G-Class aesthetics and lasting durability. W460 / W461 / W463 1990–2018 ABS Plastic Carbon Fiber Style Brabus Design Overview The Mercedes-Benz G-Class remains one of the most iconic utility vehicles ever produced. From early W460 models through the modern W463, owners have sought tasteful ways to refine the already commanding presence of this legendary platform. This front license plate holder channels that pursuit of distinction—delivering a subtle yet noticeable upgrade that transforms how your G-Class presents itself on road or urban landscape. Crafted from high-quality ABS plastic with an authentic carbon fiber finish, this Brabus-inspired plate holder integrates seamlessly with the G's front fascia. The sleek surround elevates the area around your license plate, adding definition and visual depth without compromise. At 35cm length and engineered for direct fitment across the generation span, it's a straightforward bolt-on enhancement that requires no cutting, grinding, or permanent modification. Whether you're refining a daily-driven G55 AMG or preserving the geometry of a classic W460, this holder signals intent: a commitment to quality, to detail, and to driving a vehicle worthy of the small luxuries that compound into automotive character. What's Included 🎁 Front Plate Holder ABS carbon fiber finish surround 🔧 Hardware Kit All fasteners and mounting brackets included 📋 Fitting Guide Step-by-step instructions for your model year Product Highlights High-quality ABS plastic construction with glossy carbon fiber aesthetic finish Precision engineered for direct fit across W460, W461, and W463 generations Brabus-inspired design adds visual aggression and refinement in one Lightweight and corrosion-resistant for all climates and driving conditions CCC certified for quality assurance and safety compliance Dimensions: 35cm L × 15cm W × 10cm H; weight 1.5kg Available in gloss black and carbon fiber finishes to suit any interior palette No drilling or permanent modifications required for fitment Restores character to tired front ends; elevates stock appearance instantly Backed by Victorious 30-day money-back guarantee and expert customer support Compatibility Chart Generation Model Code Years Fitment Classic G-Class W460 1979–1992 Direct Fit G-Class (Evolution) W461 1992–2001 Direct Fit G-Class (Modern) W463 2001–2018 Direct Fit G-Class (2018+) W464 2018+ Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 20–30 minutes Remove your vehicle's existing license plate assembly by unbolting the OEM surround or frame from the bumper. Clean the mounting surface thoroughly to remove dust, debris, and old adhesive residue. Position the carbon fiber Brabus plate holder over the bumper opening, ensuring it is centered and level. Align the pre-drilled holes in the holder with the mounting points on your bumper or existing brackets. Insert the provided stainless steel fasteners and tighten firmly—do not over-tighten, as ABS can crack under excessive load. Reinstall your license plate into the new holder using the supplied hardware or your original plate bolts. Step back and verify alignment, symmetry, and secure fitment before driving. Note: Some market variants (particularly early W460 and certain W461 models) may have non-standard bumper geometry. Test-fit the holder before fully tightening all fasteners. If gaps appear, minor shim adjustments using adhesive tape can ensure a flush finish. Ready to Elevate Your G-Class? Upgrade your front end with authentic Brabus-inspired design. This carbon fiber plate holder is the detail-conscious choice for G-Class owners who refuse to compromise on aesthetics or quality. Shop G-Class Accessories Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz AG, Daimler, Brabus, or any official manufacturer. All product names and trademarks are the property of their respective owners. This product is designed as an aftermarket enhancement and is provided "as is" for compatibility with the specified vehicle models. Professional installation is recommended. Always verify fitment with your local market specification and consult your vehicle's manual before installation.

Victorious · Mercedes CLA-Class · Exterior Styling GT R Style Front Grille – Mercedes CLA-Class W117 (2013–2015) Transform your CLA's front-end aesthetic with AMG GT R–inspired performance styling. W117 / C117 2013–2015 ABS Material Direct Fit Silver/Black Finish AMG Inspired Overview The Mercedes-Benz CLA-Class W117 struck a chord when it launched—affordable, sleek, and genuinely dynamic. But if you've been looking for a way to sharpen its presence without a full body kit, this GT R Style Front Grille delivers exactly that. It's the kind of upgrade that makes people look twice. Engineered to replace your factory grille, this piece takes direct inspiration from the AMG GT R supercar, translating that high-performance DNA into a sporty, aggressive front-end expression. The horizontal slat design and bold stance create visual depth and aggression, while the silver and black finish coordinates seamlessly with modern Mercedes styling cues. Manufactured from high-quality ABS plastic, it's lightweight, durable, and designed for straightforward bolt-on installation. Transfer your Mercedes star badge from the original grille and you're finished—no drilling, no permanent modifications, just instant presence upgrade. What's Included 📦 GT R Style Grille Complete replacement unit, ready to install 🔧 Hardware Kit All fasteners and clips included 📋 Installation Guide Step-by-step illustrated instructions Product Highlights AMG GT R–inspired design with aggressive horizontal slat pattern Lightweight ABS construction for durability and ease of handling Silver and black dual-tone finish matches modern Mercedes aesthetics Direct bolt-on replacement—no cutting or modification required Enhances aerodynamic appearance and front-end presence Compatible with all 2013–2015 CLA200, CLA220, CLA260, CLA300 models Preserves original grille opening for cooling efficiency Star badge easily transferred from factory grille Dramatically improves vehicle's visual impact and sportiness Investment-grade styling upgrade at accessible price point Compatibility Model Year Range Fitment Mercedes CLA200 (W117) 2013–2015 Direct Fit Mercedes CLA220 (W117) 2013–2015 Direct Fit Mercedes CLA260 (W117) 2013–2015 Direct Fit Mercedes CLA300 (W117) 2013–2015 Direct Fit Mercedes CLA (2016+) 2016 and later Not Compatible Other Mercedes Models All years Not Compatible Installation Notes Difficulty Level: Beginner | Time: 20–30 minutes Remove any trim or clips securing the factory grille to the bumper fascia. Carefully disconnect the Mercedes star badge from the original grille by gently prying the retaining clips. Lift away the factory grille and set aside. Position the new GT R Style Grille into the opening, ensuring alignment with mounting points. Secure all fasteners and clips provided in the hardware kit, tightening evenly. Reattach the Mercedes star badge to the new grille's central mounting point. Test fitment by opening and closing the bonnet to confirm stability. Clean and inspect for any gaps or misalignment. Note: The Mercedes star badge is not included with this product for trademark compliance. It transfers easily from your original grille using the existing retaining clips—a 30-second operation. If your badge is damaged or missing, replacement badges are widely available through Mercedes dealers or third-party suppliers. Ready to Elevate Your CLA's Presence? This GT R Style Grille is the perfect entry point into performance-inspired exterior styling. It's bold without being ostentatious, practical without compromise, and guaranteed to turn heads at every set of traffic lights. Add to Cart Save 20% on any 2 items with code 22GET20 4.9★ Rated 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist in vehicle styling and performance accessories. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, Daimler AG, or any official Mercedes service network. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket customization and is sold as-is for enthusiast use only.

Victorious Automotive · Range Rover Sport · Exhaust System Stainless Steel Exhaust Muffler for Range Rover Sport A precision-engineered stainless steel muffler that refines exhaust tone, reduces back pressure, and delivers a lasting, corrosion-resistant finish worthy of the Range Rover Sport's performance pedigree. Range Rover Sport L494 · L320 · L461 Stainless Steel Exhaust Muffler Corrosion Resistant Direct Fit Worldwide Shipping CAR-partment Overview The Range Rover Sport occupies a very particular space — a vehicle that genuinely performs, whether carving mountain roads or commanding an urban setting. It's a machine where the details matter, and that extends beneath the bodywork. The exhaust system is one component many Sport owners overlook until it begins to show its age: corrosion, reduced flow efficiency, and a dulled acoustic note that no longer reflects the engine's character. This stainless steel exhaust muffler is built to address all three. Manufactured from high-grade stainless steel, it resists the accelerated oxidation that plagues mild steel OEM mufflers — particularly in regions with road salting, high humidity, or extreme temperature cycling. The material's thermal resilience means it holds its structural integrity and surface finish across the full operating range of the Sport's engine, whether petrol or diesel. Beyond durability, the muffler's internal architecture is designed to smooth exhaust flow, reducing turbulence and back pressure in a way that improves exhaust gas evacuation. The result is a cleaner, slightly more pronounced exhaust note — refined rather than aggressive — and a fitment that restores or exceeds OEM performance standards without modification to the rest of the exhaust system. What's Included 🔩 Stainless Steel Muffler Main unit, fully assembled and ready to fit 🔗 Mounting Hardware Fasteners and clamps where applicable 📄 Fitting Reference Guide Basic installation reference sheet 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights High-grade stainless steel construction throughout Superior corrosion and oxidation resistance Engineered to reduce exhaust back pressure Refined, deeper exhaust note without excess noise Direct OEM replacement geometry for clean fitment Maintains factory exhaust system compatibility Thermal stability across all operating temperatures Polished outlet finish enhances underbody appearance Long-service lifespan — outlasts standard mild steel units No modifications required to surrounding exhaust components Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L405 / L460 2013–2026 Verify Before Order Range Rover Velar L560 2017–2024 Not Compatible Land Rover Discovery L462 (D5) 2017–2024 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible If you're unsure whether this muffler is correct for your specific build, engine variant, or model year, please contact us before ordering: +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–120 minutes  ·  Recommended: Qualified Technician or Experienced DIY Allow the vehicle to cool fully — exhaust components retain heat for an extended period after use. Work only on a cold system. Raise the vehicle safely using a hydraulic lift or axle stands rated for the Range Rover Sport's weight. Never work beneath a vehicle supported only by a jack. Inspect the existing exhaust hangers and clamps before removal. Corroded fasteners should be treated with penetrating fluid and allowed to soak for 15–20 minutes before attempting removal. Disconnect the existing muffler from the mid-pipe and rear section. Support the muffler with a jack or assistant to prevent stress on remaining components. Transfer any reusable gaskets or hangers if applicable. Install the new stainless steel muffler, aligning with the mid-pipe and rear section connections. Secure all clamps and fasteners to the manufacturer's specified torque. Check hanger alignment to ensure the muffler sits centrally within the vehicle undercarriage. Start the vehicle and run to operating temperature. Inspect all connection points for exhaust leaks. A brief initial burn-off of surface oils from the new unit is normal. Important: Always confirm pipe diameter, inlet configuration, and engine variant compatibility before fitting. Incorrect fitment can result in exhaust leaks, noise, or damage to surrounding components. If in doubt, consult a qualified exhaust technician. Built for the Range Rover Sport. Finished to Last. Explore the full range of exhaust upgrades and performance accessories for your Range Rover Sport at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Shop Range Rover Sport Accessories Shop New Range Rover Sport L461 Use code 22GET20 at checkout for 20% off any two items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All model names, vehicle codes, and trademarks are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Always verify compatibility with your specific vehicle before purchase. For advice, contact our team on +44 203 943 9919.

Victorious Automotive · Range Rover / Defender / Discovery · Key Covers PC+TPU Key Cover Case for Range Rover, Sport, Defender & Discovery (2018–2024) A precision-formed dual-material key fob case that shields your Land Rover remote from daily wear, impacts, and plastic degradation — without adding unnecessary bulk. L405 L494 L460 L461 L663 2018–2024 PC + TPU Material Drop Protection Anti-Peel Shell Precise Button Access Multiple Colours Tool-Free Fit Overview Range Rover, Defender, and Discovery owners know the value of protecting every detail — and the key fob is no exception. The factory plastic casing on Land Rover remotes from 2018 onwards is notorious for surface peeling, scuffing, and cracking over time, leaving the electronics beneath exposed and the aesthetic compromised. It's a small detail, but one that matters to anyone who takes pride in their vehicle. This PC+TPU key cover case is engineered specifically for the Land Rover smart key format used across the L405, L494, L460, L461, and L663 platforms. The dual-material construction combines a rigid polycarbonate (PC) shell for structural rigidity with a flexible thermoplastic polyurethane (TPU) inner layer for shock absorption — delivering genuine protection without the clumsy bulk of generic covers. Every button, port, and sensor cutout is precisely mapped to the OEM key design. Available in Black, Red, and Blue, this cover slots cleanly over your existing key fob and stays secure without clips, adhesives, or tools. Whether you're protecting a new remote or refreshing a worn one, it's one of the most cost-effective upgrades you can make to your everyday carry. What's Included 🔑 PC+TPU Key Cover Case 1× protective shell in your chosen colour 📦 Protective Packaging Arrives safely secured for transit 📋 Fitment Guide Simple model-matching reference included 🛡️ 30-Day Guarantee Backed by Victorious money-back policy Product Highlights Dual-layer PC+TPU construction for rigid outer protection and flexible inner shock absorption Prevents the common plastic peeling and surface degradation found on OEM Land Rover key fobs Precisely cut button apertures ensure full tactile response across all key functions Slim profile — adds minimal bulk while delivering maximum surface coverage Available in Black, Red, and Blue to complement your vehicle's style Designed to fit Land Rover smart keys from 2018 onwards across multiple model lines Shields key electronics from moisture, dust, and minor impact damage No tools, no adhesives, no modifications — snaps securely onto the existing fob Compatible with key fob signal — no interference with remote locking or keyless entry Cost-effective protection against expensive key fob replacement or refurbishment Compatibility Model Code Years Fit Range Rover Vogue L405 2018–2021 Direct Fit Range Rover Vogue L460 2022–2024 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Sport L461 2022–2024 Direct Fit Defender 90 / 110 / 130 L663 2020–2024 Direct Fit Discovery 5 L462 2018–2024 Direct Fit Range Rover Velar L560 2018–2024 Direct Fit Range Rover Evoque L551 2019–2024 Direct Fit Discovery Sport L550 2019–2024 Direct Fit Defender (Classic) 2004–2016 Pre-2018 Not Compatible Discovery 3 / 4 L319 / L319 Pre-2018 Not Compatible Range Rover Sport L320 Pre-2018 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Time: Under 2 minutes  |  🛠 Tools Required: None Remove your Land Rover key fob from any existing holder or keyring attachment. Identify the correct orientation of the PC+TPU cover — align the button cutouts with the corresponding buttons on your key. Starting from one end, gently press the cover over the key fob, working along each edge until the shell snaps securely into place. Press each button through the cover to confirm full tactile response and verify there is no interference with button travel. Test your remote locking, unlocking, and boot release to confirm normal signal operation before returning the key to use. ⚠ Note: Ensure your key fob is clean and dry before fitting the cover. Dirt or moisture trapped beneath the shell may cause discolouration over time. Do not force the cover — it should snap on smoothly when correctly aligned. Shop by Your Vehicle Find more accessories built specifically for your Land Rover or Range Rover model: 🚙 Range Rover Vogue L460 2022–2026 accessories 🚙 Range Rover Sport L461 2022–2026 accessories 🚙 Defender L663 2020–2026 accessories 🚙 Discovery 5 L462 accessories 🚙 Range Rover Vogue L405 2013–2021 accessories 🚙 Range Rover Sport L494 2013–2022 accessories Protect Every Detail Your key fob is the first thing you reach for every day. Give it the same level of care you give your vehicle. This PC+TPU cover fits perfectly, protects reliably, and looks the part — available in Black, Red, or Blue. Shop All Key Covers Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, authorised by, or endorsed by Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L320 · Interior Lighting 16-Piece LED Interior Lighting Kit – Range Rover Sport L320 (2006–2012) A complete, plug-and-play Canbus LED interior upgrade engineered specifically for the L320 Range Rover Sport — crisp 7000K white light, zero error codes, and a cleaner cabin ambience from the moment you close the door. L320 2006–2012 Canbus Ready 7000K White T10 / W5W / 194 16-Piece Kit 12V / 9–16V DC 50,000 Hr Lifespan Direct Fit No Error Overview The Range Rover Sport L320 was Land Rover's most driver-focused Sport model to date — a vehicle that balanced genuine off-road pedigree with a premium, purposeful interior. From the 2006 launch through to the 2012 facelift, the L320's cabin earned a strong reputation for quality, but the factory halogen interior bulbs always fell short of what the interior itself deserved. Dim, yellow-tinted map lights and lacklustre dome illumination simply don't do justice to a cabin of that calibre. This 16-piece LED interior kit was developed as a direct, vehicle-specific replacement for every major interior light position on the L320 Sport — covering map lights, dome lights, footwell areas, door courtesy lights, and the licence plate. Using high-output LED emitters behind a T10 (W5W/194) interface, each bulb slots directly into the factory holder with no modification required. The 7000K output delivers a clean, contemporary white light that transforms the cabin atmosphere immediately. Critically, each bulb in this kit is Canbus-compatible — meaning the vehicle's onboard diagnostics will not log a fault or display a warning light on your dashboard. This is a common frustration with generic LED conversions on L320 vehicles, and it's something this kit addresses by design. The result is a seamless upgrade that looks and behaves exactly as it should. What's Included 💡 Map / Reading Lights Front and rear passenger positions 🔆 Dome / Overhead Light Central cabin ceiling illumination 🚪 Door Courtesy Lights All four door sill positions 🦶 Footwell Lights Front and rear footwell areas 🔡 Licence Plate Lights Rear number plate illumination 🧰 Spare Bulbs Included Complete 16-piece set in the box Product Highlights Complete 16-piece kit covering all major interior light positions Canbus-encoded — no dashboard warning lights or error messages 7000K white output for a clean, modern cabin ambience T10 (W5W / 194) interface — direct factory socket fit Operates on 9–16V DC — compatible with standard 12V systems 7W low power draw — minimal impact on vehicle electrics Rated lifespan of over 50,000 hours — fit and forget Operating range: –20°C to +60°C — suited to all climates Vehicle-specific — engineered for L320 Range Rover Sport only 12-month warranty included as standard Compatibility Model Code Year Range Fit Range Rover Sport L320 2006 Direct Fit Range Rover Sport L320 2007 Direct Fit Range Rover Sport L320 2008 Direct Fit Range Rover Sport L320 2009 Direct Fit Range Rover Sport L320 2010 Direct Fit Range Rover Sport L320 2011 Direct Fit Range Rover Sport L320 2012 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–40 minutes  ·  Tools Required: None Ensure the ignition is off and the interior lights are not active before beginning any bulb swap. Use a trim removal tool or a flat-edged cloth-wrapped implement to gently prise open each light lens cover — most on the L320 clip open without screws. Remove each factory halogen bulb by carefully pulling it from its holder. T10 bulbs pull straight out — no rotation needed. Insert the corresponding LED bulb from this kit firmly into the same socket. Ensure the pins are fully seated and the bulb is secure. Clip the lens cover back into place and test the light before moving to the next position. Once all bulbs are installed, switch on the ignition and cycle through all interior lights to confirm correct operation and verify no warning messages appear on the instrument cluster. Note: If any bulb flickers on first installation, switch the bulb orientation 180° in the socket — LED polarity can occasionally need reversing depending on socket wiring. All bulbs in this kit are Canbus-rated, but if a warning persists on a particular position, contact our team at +44 203 943 9919 for guidance. Upgrade Your L320's Interior — The Right Way At Victorious Automotive, every product we stock is selected with one type of owner in mind: someone who cares deeply about their Land Rover and won't settle for second best. This LED kit is the cleanest, most complete interior lighting upgrade available for the L320 Range Rover Sport. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the intellectual property of their respective owners.

```html Victorious · Universal · Sun Protection Car Magnetic Sunshade Professional-grade UV protection with magnetic quick-fit design—no tools, no drilling, maximum comfort. Universal Fit 50cm Height Mesh & Flat Cloth Paired Set Tool-Free Install Overview Whether you're navigating urban heat in your Range Rover, protecting interior leather on a Defender expedition, or keeping your Land Cruiser interior cool in extreme conditions, the Car Magnetic Sunshade delivers serious climate and UV control. Built from flexible mesh and premium flat cloth materials, these dual-panel shades mount directly to your vehicle's side windows using integrated magnetic tracks—no adhesive damage, no permanent modification. Engineered to reduce glare by up to 60%, block harmful UVA/UVB rays, and improve air conditioning efficiency, this sunshade works harder than standard pull-down designs. The stretchable fabric adapts to curved windows on modern vehicles, while the integrated track system ensures the curtain stays perfectly seated—no sagging, no gaps, no rattling over rough terrain. Installation takes fewer than 10 minutes per window. Clean, dry, align, press, and done. No silicone vacuum cups to fail. No suction marks on glass. The twin-panel configuration covers both rear passenger windows, making it ideal for families, long journeys, and protecting valuables from opportunistic eyes. What's Included 📋 Curtain Fabric × 2 Mesh & flat cloth paired panels, 50cm height 🛤️ Magnetic Track × 4 Adhesive-backed rails with integrated guides 🎯 Mounting Straps × 2 Reinforcement supports for curved windows ⚙️ Installation Kit Alignment guide, cleaning cloth, instructions Why Choose This Sunshade Blocks 60% of glare & 99% UVA/UVB rays without tint Magnetic track keeps curtain seated during off-road use Zero tools required—fits in 10 minutes per window Stretchable fabric adapts to curved modern windows Improves AC/heating efficiency by 15–25% No adhesive residue—removes cleanly from glass Protects rear passenger privacy & interior leather Double-sided adhesive cures fully in 24 hours Paired set covers both rear side windows Black mesh design maintains aesthetic appeal Compatibility & Sizing Size Option Dimensions Ideal For Fit Small (S) 50 × 39cm Compact & mid-size windows Direct Fit Large (L) 50 × 47cm Large SUVs & extended rear panels Direct Fit Custom Sizing On Request Specialty vehicles & shaped windows Contact Us Tip: Measure your side window height before ordering. The 50cm track height accommodates most rear side windows on Range Rover, Defender, Discovery, and Land Cruiser platforms. For oversized or curved glass, choose the Large (L) option and use mounting straps for secure fitment. Installation Guide Difficulty: Beginner | Time: 8–12 mins per window Prepare the surface: Wipe both the upper and lower edges of your side window with a damp cloth. Remove dust, pollen, and residue. Dry completely with a microfiber cloth and allow 5–10 minutes for full air-drying. Align the track: Peel back approximately 2cm of the adhesive release paper from the magnetic track. Position the track flush with the top edge of the window frame, ensuring it runs parallel to the glass. The round mounting holes should face the window interior. Apply the track: Slowly press the track onto the glass edge, working from top to bottom in one smooth motion. Follow the window curve and avoid trapping air bubbles. Press firmly for 3–5 seconds every 10cm. Repeat for bottom track: After securing the top track, clean the lower edge, peel the second track's release paper, and apply it 3–4cm below the window bottom edge. Ensure both tracks are parallel and level. Insert the curtain fabric: Align the fabric's round hooks with the track's round entrance holes. Insert hooks into the bottom track first, then guide the fabric upward into the top track, following the integrated guide system. The fabric should seat smoothly without binding. Attach mounting straps: If using curved windows, apply the reinforcement straps to the fabric's side edges at the midpoint for added stability during vehicle motion. Wait 24 hours: Allow the double-sided adhesive to fully cure before operating your windows or driving. This ensures maximum track adhesion during off-road use or rapid acceleration. ⚠️ Important: Ensure the round mounting holes on the track are oriented vertically on the window-facing side. Misalignment will prevent the fabric hooks from seating properly. If the track tension feels loose after 24 hours, do not force the fabric. Instead, remove the fabric temporarily and allow another 12–24 hours for adhesive curing before reloading. Ready to Upgrade Your Interior Climate? The Car Magnetic Sunshade combines professional sun protection with installation simplicity. Perfect for daily commutes, family road trips, and expedition prep. No tools. No mess. Just cooler, more private comfort. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews ✓ 30-day money-back ✓ Worldwide shipping 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any OEM manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for universal fitment and compatibility; individual results may vary based on vehicle trim, year, and glass shape. Always consult your vehicle manual before installation. ```

Victorious Automotive · All Vehicles · Maintenance Automotive Glass Nano Repair Fluid Professional windscreen and window damage repair kit with nano-technology resin—restore glass without costly replacements. All Vehicles Glass Repair Nano Resin DIY Kit UV Curing Crack & Chip Fix Overview Whether you're navigating tight mountain passes in a Defender L663, cruising in your Range Rover Sport L461, or tackling rough terrain in a Discovery 5, windscreen and window damage is inevitable. A single chip from road debris or a crack from impact can escalate into a dangerous structural issue—and a £400+ replacement bill. This Automotive Glass Nano Repair Fluid offers a professional-grade solution you can apply at home in under an hour. The nano-resin formula penetrates deep into glass fractures, bonding at the molecular level to restore clarity, strength, and structural integrity. Unlike temporary sealants, this system hardens to optical quality under UV light, making repairs virtually invisible. It's engineered for all glass types—windscreens, side windows, rear panes—and handles the full spectrum of damage: chips, stress cracks, impact fractures, and collision damage. Designed for the pragmatic enthusiast who values preventative maintenance and self-sufficiency, this kit delivers professional results without workshop costs or scheduling delays. The formula works in temperatures between 15–32°C, cures under UV or natural sunlight, and includes everything needed for multiple repairs. For Land Rover and Range Rover owners who demand reliability and durability, this is essential emergency glass care. What's Included 🧪 2× Repair Resin Bottles Professional nano-bonding resin for multiple repairs 💡 5× UV Cure Strips Activates hardening; works with UV lamps or sunlight 🔪 1× Sleeve Razor Precision tool for surface prep and excess removal 📋 Application Guide Step-by-step instructions with safety protocols Product Highlights Nano-resin technology bonds at molecular level for permanent repair Works on all glass types: windscreens, side windows, rear panes Restores structural integrity and optical clarity Cures under UV light or natural sunlight (no special equipment required) Ideal application temperature: 15–32°C (60–90°F) Handles chips, stress cracks, impact fractures, and collision damage DIY-friendly with included tools and detailed guidance Saves £300+ per windscreen replacement Each kit supports multiple repairs for long-term value Essential maintenance for off-road and adventure driving Compatibility Vehicle Type Compatibility Range Rover Sport L461 (2022–2026) Direct Fit Range Rover Vogue L460 (2022–2026) Direct Fit Defender L663 (2020–2026) Direct Fit Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Vogue L405 (2013–2020) Direct Fit Range Rover Velar (2018–2022) Direct Fit Discovery 5 (2017–2026) Direct Fit Discovery Sport (2015–2026) Direct Fit Range Rover Evoque L551 (2019–2026) Direct Fit Toyota Land Cruiser LC300 / LC250 Direct Fit Mercedes G-Class (G-Wagon) Direct Fit All Modern Vehicles (Universal Application) Direct Fit Application Guide Difficulty Level: Beginner | Time: 45–60 minutes + curing Assess Damage: Inspect the glass for chips, cracks, or fractures. Damage must be addressed immediately to prevent spreading. Prepare the Area: Cover the damaged area with painter's tape to prevent moisture and dirt from entering. Ensure the surface is completely clean and dry. Apply Resin: Carefully apply the nano-repair resin directly into the damaged area using the applicator. Fill the crack or chip completely without over-application. Smooth the Surface: Use the included sleeve razor to carefully remove excess resin and level the repair with the surrounding glass surface. Cure Under UV Light: Activate curing strips and expose the repair to UV light for 5–10 minutes, or place in direct sunlight for 15–20 minutes. If using a UV lamp (not included), follow lamp instructions for optimal curing. Final Inspection: Once cured, the repair should be optically clear and structurally sound. Remove tape and inspect seams. Cleanup: Dispose of used materials responsibly. Store remaining resin in a cool, dry location away from direct sunlight. Safety Note: Wear safety glasses and nitrile gloves during all application steps. Avoid skin and eye contact with uncured resin. Work in a well-ventilated area. Do not expose uncured resin to unnecessary light before application. Restore Your Glass, Protect Your Investment Glass damage doesn't have to mean a costly trip to the workshop. This professional nano-repair system puts control back in your hands—fast, affordable, and engineered for durability. Whether it's a chip from gravel on a Defender expedition or a stress crack on your Range Rover, this kit delivers results that last. Add to Cart Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back Guarantee 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory supplier. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, Land Rover, Defender, Discovery, or any parent company or subsidiary thereof. All vehicle names, logos, and specifications are the property of their respective manufacturers. Product compatibility is based on standard fitment; always verify fitment with vehicle specifications or contact our support team before purchase.

Victorious Automotive · Emergency Power · Auto Accessories 12V Car Jump Starter Power Bank – 800A Emergency Auto Booster Portable emergency power solution for petrol and diesel engines, combining jump-start capability with USB charging and integrated SOS lighting. 12V System 800A Peak Petrol & Diesel Emergency Ready USB Power Bank Portable Overview Whether you're stranded with a flat battery on a remote track or managing a multi-vehicle operation, this 12V car jump starter ensures you're never left without power. Victorious Automotive stocks this unit as an essential backup for Land Rover and Range Rover owners who demand reliability in challenging conditions—from Scottish highlands to overseas expeditions. The device combines a dedicated 8000mAh battery pack with peak output of 800A, delivering sufficient current to reliably start petrol engines up to 4.0L and diesel units up to 2.5L. Beyond emergency starting, it functions as a portable USB power bank for phones, tablets, and camp gear—critical when you're hours from civilization or managing overlanding routes through regions with intermittent power. Multiple safety certifications (CE, CCC, MSDS) and intelligent circuit protection ensure safe operation. The integrated SOS lighting mode and warning beacon transform it into a roadside safety device, while the compact 0.75kg form factor fits tool kits, centre consoles, or expedition boxes without compromise. What's Included 🔋 Jump Starter Power Bank 8000mAh capacity, 12V output 🔌 Smart Ignition Clip Heavy-duty battery connector Product Highlights 800A peak starting current – handles both petrol and diesel engines reliably 8000mAh dual-function battery – jump starter and USB power bank in one Compact & lightweight – 0.75kg fits expedition kits and vehicle storage USB 5V/2.4A output – charges phones, tablets, and portable devices on extended trips Multi-mode LED lighting – normal, warning, and SOS modes for roadside safety Suitable for petrol cars ≤4.0L & diesel cars ≤2.5L – covers most SUV platforms CE & CCC certified – meets EU and international safety standards MSDS certified battery – compliant with hazardous goods transport regulations Intelligent circuit protection – prevents overcharge, short circuit, and over-discharge Universal battery terminal compatibility – works with standard 12V automotive systems Compatibility Vehicle Type Engine Size Compatibility Petrol Cars Up to 4.0L Direct Fit Diesel Cars Up to 2.5L Direct Fit Petrol Engines Over 4.0L Not Recommended Diesel Engines Over 2.5L Not Recommended Heavy Commercial 24V+ Systems Incompatible Usage & Setup Getting Started Ensure the device is fully charged before first use via USB input port Connect the smart ignition clip to your vehicle's battery terminals (red to positive, black to negative) Press the power button once to activate – LED indicator confirms readiness Turn the vehicle ignition key or press the start button; the starter should engage Once the engine starts, disconnect the clip and allow the engine to run for 2–3 minutes Recharge the device via USB before next use; charge time is approximately 3–4 hours For USB charging, use the dedicated port to charge phones or tablets Press and hold the power button for 3 seconds to activate SOS or warning lighting modes Safety Note: Do not use if the device shows signs of physical damage, leaking, or overheating. Keep away from moisture and extreme temperatures. Ensure battery terminals are clean before connection to prevent arcing. Why Victorious Customers Choose This Unit Overlanders, expedition teams, and daily drivers all face the same risk: an unexpected flat battery in a location where breakdown cover takes hours to arrive. This portable jump starter removes that anxiety. Its dual function (emergency starting + USB power) means one compact device handles multiple scenarios. Land Rover and Range Rover owners particularly value its lightweight form factor and multi-mode lighting—essential when signalling for help or conducting repairs in low light. The 400A sustained starting current (with 800A peak burst) is calibrated for modern SUV electrical loads. Unlike generic jump starters, this unit carries CE and CCC certification, meaning it's been independently tested for safety under real-world conditions. Ready to Add Emergency Power to Your Vehicle? Stock this compact jump starter in your vehicle, expedition box, or home garage. With multi-mode lighting and dual-function USB charging, you'll be prepared for flat batteries, camping trips, and roadside emergencies. Free worldwide shipping on orders over £50. Shop Now Use code 22GET20 for 20% off any 2 items from our Emergency & Recovery collection. 30-Day Money-Back Guarantee 4.9/5 Stars • 12,300+ Reviews Worldwide DHL, FedEx, UPS, TNT Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. Product descriptions and compatibility information are provided in good faith based on supplier data and customer feedback. Always verify compatibility with your vehicle's specific model year and powertrain before purchase. This product is not an OEM part and carries no manufacturer warranty from JLR or related entities.

Victorious · Universal · Interior Organizers Victorious Automotive Car Bin Organizer Keep your cabin clutter-free with a sleek, collapsible car trash bin designed for Land Rovers, Range Rovers, and Defenders. Universal Fit Interior Organizer Plastic Construction Pressing Type Rolling Cover Black · Dark Gray Overview Whether you're tackling a weekend expedition or managing daily commutes in your Land Rover, Discovery, or Defender, interior cleanliness matters. Crumbs, wrappers, and debris accumulate quickly in any premium cabin. This Victorious Car Bin Organizer solves that problem with a compact, discreet waste solution that blends seamlessly with modern automotive interiors. Engineered from durable plastic with a pressing-type design and convenient rolling cover lid, this bin keeps refuse contained and hidden from view. The round profile minimises dashboard or cupholderspace intrusion, while the collapsible construction allows for easy storage when not in use. Available in sleek black or dark gray to match your vehicle's aesthetic. Perfect for cup holders, door pockets, or console storage, this organiser serves double duty as a desktop waste bin for offices and workspaces. For the discerning enthusiast who refuses to compromise on cabin presentation, this is the upgrade you've been searching for. What's Included 🗑 Car Bin Organizer Rolling cover type, pressing operation 🎨 Colour Options Black or Dark Gray finish 📦 Ready to Install No tools or modifications needed Product Highlights Rolling cover lid design for quick and discreet waste disposal Compact round shape fits standard cup holders and console spaces Durable plastic construction withstands daily use and temperature changes Pressing-type mechanism—intuitive operation, no complicated mechanisms Collapsible design for convenient storage when travelling Blends seamlessly into Range Rover, Defender, and Discovery interiors Dual-purpose: car waste bin or office desktop organiser Available in black and dark gray to match your vehicle's tone Lightweight and non-intrusive—won't obstruct your driving space Easy to clean and maintain for long-term use Compatibility Model Vehicle Code Fitment Range Rover Sport L461 / L494 / L320 Universal Fit Range Rover Vogue L460 / L405 Universal Fit Defender L663 / 2004–2016 Universal Fit Land Rover Discovery 3 / 4 / 5 / Sport Universal Fit Range Rover Evoque L551 / L538 Universal Fit Range Rover Velar 2018–2022 Universal Fit Toyota Land Cruiser LC300 / LC250 Universal Fit Mercedes G-Class G-Wagon Universal Fit Jaecoo J7 J7 Universal Fit Installation & Use Installation Difficulty: Minimal This organiser requires no installation. Simply place it in your preferred location and begin using. Setup Steps Choose your preferred location: cup holder, door pocket, centre console, or desktop If using a cup holder, ensure the bin diameter fits snugly (round shape recommended for standard cup holders) For console placement, ensure it won't interfere with gear shift or controls Press the lid to open and dispose of waste Release the lid—it will roll shut automatically Empty contents as needed by lifting the bin and removing waste Pro Tip: Line the interior with a small plastic bag for easy emptying and maintenance. This prevents residue buildup and keeps your bin fresh between cleanings. Keep Your Cabin Pristine Maintain showroom condition inside your premium Land Rover or Range Rover with this elegant, practical car bin organiser. Discreet design. Intuitive operation. Built to last. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars · 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT UK support: +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Land Rover, Defender, or any official Land Rover entity. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is a third-party accessory designed for compatibility and enhancement only.

Victorious Automotive · Land Rover Discovery / Range Rover · Steering Wheel Trim Steering Wheel Button Trim Frame in Black — Land Rover Vogue, Sport, Discovery & Evoque (2013–2017) A precision-fit black decorative frame that brings clean, consistent detail to your steering wheel's button surround — purpose-built for 2013–2017 Land Rover and Range Rover models. L405 · L494 · L538 · L462 2013–2017 Gloss Black Steering Wheel Trim No-Drill Fit Interior Upgrade Laser-Cut Direct Fit Overview The 2013–2017 generation of Land Rover and Range Rover interiors — spanning the L405 Vogue, L494 Sport, L538 Evoque, and L462 Discovery Sport — share a steering wheel design that remains refined but benefits from small, considered upgrades. The button surround area, in particular, is one of those details that separates a stock cabin from one that's been thoughtfully personalised. These Steering Wheel Button Trim Frames in Black are designed to sit flush over the existing button cluster surrounds on your steering wheel, introducing a clean gloss black border that ties directly into the dark tones popular across the interiors of this model range. The result is a more cohesive, finished look — the kind of detail you notice every time you sit behind the wheel. Precision laser-cut to match the exact dimensions of the factory button layout, they require no drilling, adhesive mess, or professional fitting. If you've been looking for a low-effort, high-impact upgrade that respects the original interior design while adding something genuinely your own, this is it. What's Included 🔲 Steering Wheel Button Trim Frame × 2 Left and right button surround frames, gloss black finish 📋 Fitting Guide Step-by-step installation reference included 🧤 Protective Packaging Individual foam-lined packaging to prevent transit damage Product Highlights Precision laser-cut for an exact, rattle-free fit on 2013–2017 steering wheels Gloss black finish complements both black and tan interior colour schemes Manufactured from durable ABS — resistant to heat, UV, and daily wear No drilling, cutting, or permanent modification required Clip-fit retention system holds firmly without adhesive Covers the full perimeter of the button cluster surround cleanly Slim-profile design maintains full button travel and tactile response Compatible across four distinct model lines from a single part Achieves a factory-integrated look rather than an obvious aftermarket addition Reversible upgrade — original trim can be restored at any time Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Evoque L538 2013–2017 Direct Fit Land Rover Discovery Sport L462 2015–2017 Direct Fit Land Rover Discovery 4 L319 2013–2016 Verify First Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your vehicle, switch off the ignition, and allow the steering wheel to return to its natural resting position for easy access. Clean the existing button surround area thoroughly using a dry microfibre cloth to remove any dust, grease, or residue that could affect fitment. Hold the trim frame up to the button cluster to confirm alignment before fitting — the frame should sit naturally with no forcing required. Starting from one edge, press the frame firmly into position over the existing surround, working gradually around the perimeter until the clip system engages fully. Apply even, gentle pressure across the full surface to confirm the frame is seated flush with no gaps or lifted edges. Repeat the process for the second frame on the opposite button cluster, then inspect both under natural light to confirm a consistent, rattle-free fit. ⚠ Important: Always verify your specific steering wheel variant matches the product images before fitting. Some early 2013 production vehicles may have a slightly different button surround profile. If in doubt, contact us before installation at +44 203 943 9919. Browse by Model Looking for additional interior upgrades for your specific vehicle? Explore our full curated collections below: 🔗 Range Rover Vogue L405 2013–2020 accessories 🔗 Range Rover Sport L494 2013–2020 accessories 🔗 Range Rover Evoque L538 Evoque accessories 🔗 Land Rover Discovery Sport Discovery Sport accessories Complete Your Interior Every detail matters. At Victorious Automotive, we stock the accessories that Land Rover owners actually want — refined, precise, and built to last. Explore our full interior range and use code below for 20% off any two items. Shop Interior Upgrades Use Code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover · Steering Wheel Trim Rose Gold Steering Wheel Button Trim for Range Rover Vogue, Sport, Discovery & Evoque (2013–2017) A precision-cut, peel-and-stick rose gold accent set that instantly elevates your steering wheel's button surround — no tools, no fuss, and a finish that looks factory-fitted. L405 Vogue 2013–2017 L494 Sport 2013–2017 L538 Evoque 2013–2017 Discovery 5 2017 Rose Gold ABS Peel & Stick 4-Piece Set No Tools Required Laser Cut Overview The Range Rover Vogue L405, Range Rover Sport L494, Range Rover Evoque L538, and early Land Rover Discovery 5 all share a similar interior design language — one that rewards carefully chosen accents. The steering wheel, being the most frequently touched surface in the cabin, is the first place owners look when considering a meaningful interior upgrade. This Rose Gold Steering Wheel Button Trim set consists of four precision laser-cut frames, designed to overlay the existing button surrounds on your multifunction steering wheel. Manufactured from high-quality ABS with a durable rose gold finish, each piece is engineered to mirror the contours of the original controls exactly — delivering a seamlessly integrated look rather than the afterthought appearance of generic overlays. Whether you're building out a full rose gold interior scheme or simply want a single focal point of warmth against a dark cabin, these button frames do the job with quiet confidence. Installation takes under ten minutes with no specialist tools, making this one of the most rewarding upgrades-per-pound available for these models. What's Included 🎛️ Button Frame Set (×4) Rose gold ABS overlay frames for steering wheel button surrounds 🔲 Pre-Applied 3M Adhesive Factory-applied double-sided tape on each piece for secure bonding 📋 Installation Guide Step-by-step fitting reference included in packaging 🛡️ Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Precision laser-cut ABS for an exact, gap-free fit on OEM button surrounds Durable rose gold PVD-style finish — resistant to everyday wear and UV fading Pre-applied 3M-grade adhesive backing for a strong, long-lasting bond Peel-and-stick fitment — no drilling, clipping, or professional installation required Specifically designed for 2013–2017 multifunction steering wheel layouts Four-piece set provides complete coverage of all button cluster surrounds Lightweight ABS construction adds negligible weight with no steering feel impact Complements other rose gold interior trim pieces for a cohesive cabin aesthetic Reversible install — removal leaves no residue on OEM surfaces when done correctly Compatible across four popular Land Rover and Range Rover nameplates Compatibility Vehicle Model Code Year Range Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Evoque L538 2013–2017 Direct Fit Land Rover Discovery 5 L462 2017 (Early) Direct Fit Range Rover Vogue L405 2018–2021 Verify First Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 4 L319 2009–2016 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Start with a clean, dry steering wheel. Using a microfibre cloth, wipe down all button surround areas with an isopropyl alcohol wipe (not included) to remove any oils, dust, or residue — this step is critical for adhesion. Dry-fit each of the four frame pieces onto their corresponding button clusters before removing any adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first piece. Position carefully over the button surround and press firmly for 10–15 seconds, working from the centre outward to eliminate air pockets. Repeat for the remaining three pieces. Apply consistent pressure across the full surface of each frame. Allow the adhesive to cure for 24 hours before heavy use or exposure to direct sunlight where possible — this ensures maximum long-term bond strength. ⚠ Important: Do not apply in temperatures below 10°C (50°F) as adhesive performance may be reduced in cold conditions. Verify your exact steering wheel variant matches the product images before installation. If your vehicle has a revised post-2017 steering wheel layout, please contact us before purchasing. Shop the Full Land Rover Collection Browse our complete range of interior upgrades for Range Rover Vogue, Range Rover Sport, Land Rover Discovery, and Evoque — all curated specifically for discerning Land Rover owners. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Shop Discovery 5 Accessories Buying two or more items? Use code below for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover (JLR), Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover / Land Rover · Interior Trim Black Steering Wheel Button Frame Trim for Range Rover Vogue, Sport, Discovery & Evoque (2017–2020) A precision laser-cut black trim frame that redefines the look of your steering wheel buttons — giving your 2017–2020 Range Rover or Land Rover interior a sharper, more refined finish. L405 Vogue 2017–2020 L494 Sport 2017–2020 Discovery 5 2017–2020 Evoque L538 2017–2020 Gloss Black Precision Laser Cut No Drilling Required OEM Fit Interior Trim Peel & Stick Overview The 2017–2020 Range Rover Vogue (L405), Sport (L494), Discovery 5, and Evoque (L538) share a steering wheel architecture that is functional and well-engineered — but the button surrounds, in stock form, lack the visual contrast that the rest of a premium interior deserves. Over time, the original plastic frames can appear faded, scuffed, or simply underwhelming compared to the cabin's overall standard. This Black Steering Wheel Button Frame Trim is designed to sit precisely over the existing button surrounds, transforming that overlooked detail into a deliberate design statement. The gloss black finish adds depth and contrast against the steering wheel's leather and stitching, creating a cohesive look that feels factory-intended rather than aftermarket. Whether your interior is finished in black, tan, or ebony, the contrast works cleanly across all trim levels. Each piece is laser cut to exact OEM tolerances, ensuring there are no gaps, misalignments, or adjustments needed on fitment. Installation requires no tools — the trim applies directly over the factory surround using a secure adhesive backing, making it one of the most accessible interior upgrades available for these models. What's Included 🖤 Steering Wheel Button Frame Set Full set of button surround trim pieces for left and right clusters 🔧 Installation Instructions Step-by-step guide included in the box 🧴 Adhesive Backing Pre-Applied High-bond 3M-style adhesive — no additional tools required 🧹 Prep Wipe Surface cleaning wipe for optimal adhesion before fitting Product Highlights Gloss black finish adds premium contrast to OEM button surrounds Precision laser cut for an exact, gap-free fit on all listed models Pre-applied high-bond adhesive — no drilling, no screws, no damage Durable ABS construction resists heat, UV, and daily wear Compatible with full 2017–2020 steering wheel layout including all button clusters Maintains full access and function to all steering wheel controls Complements other black interior trim upgrades across the cabin Installs in under 20 minutes with no professional help needed Removable without damage to original trim when care is taken Verified fitment across Vogue, Sport, Discovery 5, and Evoque variants Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 2017–2020 Direct Fit Range Rover Sport L494 2017–2020 Direct Fit Land Rover Discovery 5 L462 2017–2020 Direct Fit Range Rover Evoque L538 2017–2020 Direct Fit Range Rover Velar L560 2018–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Land Rover Discovery 4 L319 2009–2016 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 15–20 minutes  |  Tools Required: None Park your vehicle and ensure the steering wheel is centred and in its default position. Turn off the ignition completely. Use the included prep wipe to thoroughly clean the existing button surround area. Remove any dust, oils, or residue and allow to dry fully — approximately 60 seconds. Carefully peel the backing from the adhesive on the first trim piece. Do not touch the adhesive surface. Align the trim piece over the button surround, starting from one corner to ensure correct positioning before committing the full surface. Press firmly and evenly across the trim piece for 20–30 seconds to activate the adhesive bond. Work from the centre outward to avoid air pockets. Repeat for the remaining trim pieces. Allow the adhesive to cure fully for 30 minutes before operating the steering wheel controls. Check all buttons for unobstructed movement and confirm the trim sits flush with no lifting at the edges. ⚠ Important: Always verify your exact steering wheel variant against the product images before fitting. Steering wheel button layouts can vary between trim levels (SE, HSE, Autobiography, SVR) within the same model year. If you are unsure, contact us before installation at +44 203 943 9919 (Mon–Fri, 9am–7pm). Elevate Every Detail Your hands are on it every single drive. This is the kind of upgrade that rewards you every time you get behind the wheel — small in size, significant in feel. Shop the full interior trim collection for your model below. Shop Range Rover Vogue (L405) Accessories Shop Range Rover Sport (L494) Accessories Shop Discovery 5 Accessories Shop Evoque (L538) Accessories Buying 2 or more items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and associated vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Carbon Fiber Steering Wheel Button Trim Frame for Range Rover Vogue, Sport, Discovery 5, Evoque & Velar (2017–2020) A precision-cut carbon fiber upgrade that reframes your steering wheel controls with a sharper, more purposeful aesthetic — purpose-built for JLR interiors from 2017 to 2020. L405 Vogue 2018–2020 L494 Sport 2018–2020 Discovery 5 2019–2020 Evoque 2020 Discovery Sport 2020 Velar 2017–2020 Carbon Fiber Steering Wheel Trim No-Drill Fit Interior Upgrade Overview The steering wheel is the single most-touched surface in your Land Rover or Range Rover — it's where your hands rest every drive, where your thumbs navigate audio, telephony, and driver assistance controls. For owners of the L405 Vogue, L494 Sport, Discovery 5, Velar, Evoque, and Discovery Sport, the factory plastic button surrounds are functional but visually forgettable against an otherwise well-appointed interior. This carbon fiber steering wheel button trim frame addresses that directly. Precision laser-cut from high-quality carbon fiber composite, each frame is engineered to sit flush against the existing button clusters — bringing a motorsport-derived visual language to the cabin without requiring any modification to the original switchgear or wiring. The result is a cohesive, purposeful upgrade that reads as factory-specification to anyone who knows what they're looking at. Whether you're building out a full interior trim refresh or making a single targeted improvement, these frames offer one of the highest visual returns per pound of any interior accessory available for these platforms. Available in multiple colour finishes to complement your specific interior — black carbon, silver carbon, and more — so your upgrade matches, not clashes. What's Included 🎛️ Left Button Trim Frame Driver-side steering wheel control surround 🎛️ Right Button Trim Frame Passenger-side steering wheel control surround 🔧 Pre-Applied Adhesive 3M-grade backing tape for secure, residue-free fitment 🧤 Fitment Instructions Step-by-step guide included in packaging Product Highlights Precision laser-cut carbon fiber for an exact OEM-profile fit on JLR steering wheels High-gloss carbon fiber weave finish adds visual depth and tactile contrast Pre-applied 3M adhesive backing for tool-free, damage-free installation Does not obstruct or interfere with any existing steering wheel button functions Available in multiple finishes to complement both light and dark interior trims Lightweight composite construction adds no meaningful weight to the steering assembly Resistant to heat, UV fading, and everyday handling — built to last the vehicle's life Compatible across six JLR platforms sharing the same steering wheel button layout Reversible upgrade — removes cleanly without marking original plastic surfaces Designed and quality-checked specifically for 2017–2020 JLR platform steering wheels Compatibility Model Platform / Code Year Range Fitment Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Land Rover Discovery 5 L462 2019–2020 Direct Fit Range Rover Evoque L551 2020 Direct Fit Land Rover Discovery Sport L550 2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Park your vehicle and ensure the steering wheel is in the central, neutral position. Turn off the ignition and allow the wheel to cool if recently driven. Clean the existing button trim surround thoroughly using an isopropyl alcohol wipe. Remove any dust, skin oils, or polish residue. Allow to dry fully for 2–3 minutes. Test-fit the trim frame over the button cluster before committing — confirm the profile sits flush and all button apertures align correctly with no overhang. Peel the protective backing from the pre-applied adhesive tape. Align the frame carefully from one edge, pressing down progressively to avoid air pockets or misalignment. Apply firm, even pressure across the entire frame surface for 30–60 seconds. Allow the adhesive to cure for 1 hour before regular use. Repeat for the opposite side. Inspect both frames in good light to confirm even placement and consistent gap lines around each button. ⚠ Note: Do not stretch, flex, or force the trim frame during installation. Carbon fiber composite is rigid and will crack under bending stress. If fitment feels misaligned, remove carefully and reposition — do not apply additional pressure to compensate. Shop by Your Model Looking for more interior trim upgrades for your specific vehicle? Browse the full accessory collection for your platform below. 🔗 Range Rover Vogue L405 2013–2020 accessories 🔗 Range Rover Sport L494 2013–2020 accessories 🔗 Land Rover Discovery 5 L462 accessories 🔗 Range Rover Evoque L551 2019–2024 accessories 🔗 Range Rover Velar 2018–2022 accessories 🔗 Land Rover Discovery Sport L550 accessories Upgrade Every Detail This is the kind of upgrade that doesn't shout — it simply makes everything feel more considered. Add it to your basket alongside another Victorious favourite and use code below for 20% off both. Shop Discovery 5 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle make, model, and platform references are used solely for fitment compatibility purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery & Range Rover · Interior Trim Red Decorative Steering Wheel Button Frame — Land Rover Vogue, Sport, Discovery & Evoque (2017–2020) A precision laser-cut interior accent that brings a bold, personalised touch to your steering wheel — crafted specifically for Land Rover and Range Rover models from 2017 to 2020. Discovery 5 Range Rover Vogue L405 Range Rover Sport L494 Evoque L538 Velar 2017–2020 Steering Wheel Trim Red Finish Laser-Cut No-Drill Install Interior Accent Overview The Range Rover Vogue, Sport, Discovery 5, Evoque, and Velar represent some of the most refined interiors in the SUV segment — but for owners who want their cabin to feel truly their own, the factory finish only goes so far. The steering wheel, one of the most tactile surfaces in the vehicle, is one of the first places where a considered upgrade makes an immediate impression. These Red Steering Wheel Button Decorative Frames are engineered to sit flush over the existing button surrounds on your steering wheel, transforming the look of the controls with a sharp, colour-forward accent. Each frame is precisely laser-cut to ensure a factory-close fit — no gaps, no movement, no compromised aesthetics. The red finish adds a sporting character without feeling aftermarket or out of place against the premium trim levels these vehicles are known for. Compatible across a broad range of Land Rover and Range Rover models between 2017 and 2020, these frames install in minutes using adhesive backing — no tools, no drilling, no risk to your interior. Whether you're personalising a daily driver or finishing off a full interior refresh, this is one of the easiest, most impactful upgrades available for your steering wheel. What's Included 🔴 Steering Wheel Button Frames Full set of red decorative surrounds for steering wheel buttons 🔧 Pre-Applied Adhesive Clean adhesive backing for straightforward, tool-free fitting 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Precision laser-cut for exact button surround alignment Bold red finish adds a sporty, personalised cabin accent Tool-free installation — fits in under 15 minutes Pre-applied adhesive backing for secure, clean fitment Designed specifically for 2017–2020 Land Rover steering wheel profiles Does not interfere with button function or tactile feedback Durable, high-quality material resists fading and daily wear Removable without damage to the original steering wheel surface Compatible across five distinct Land Rover and Range Rover nameplates Available in additional colour options — check our other listings Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Evoque L538 2020 Direct Fit Land Rover Discovery 5 L462 2019–2020 Direct Fit Land Rover Discovery Sport L550 2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure your steering wheel surface is clean and completely free of dust, grease, and moisture. Use an isopropyl alcohol wipe for best adhesion results. Lay out the full set of frames and identify each piece against the corresponding button surround on your steering wheel. Peel the protective backing from the adhesive on the first frame, taking care not to touch the adhesive surface. Carefully align the frame over the corresponding button surround, pressing gently into position before applying firm pressure for 20–30 seconds. Repeat for all remaining frames, working methodically across the wheel. Leave undisturbed for a minimum of 30 minutes to allow the adhesive to fully bond before driving. Important: Verify your exact model year and steering wheel specification before fitting. Steering wheel button layouts can vary between facelift and pre-facelift builds within the same model year. If in any doubt, contact us on +44 203 943 9919 before ordering. Complete Your Interior Browse the full range of interior accessories for your Land Rover or Range Rover — from dashboard trims and gear surrounds to ventilation accents and door handle covers. Shop Discovery 5 Accessories Shop Range Rover Vogue L405 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for fitment identification and compatibility purposes. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Land Rover Discovery · Interior Trim Rose Gold Steering Wheel Button Decorative Frame — Land Rover Vogue, Sport, Discovery & Evoque 2017–2020 A precision-cut rose gold trim frame that transforms your steering wheel controls into a polished, luxury focal point — no tools, no hassle, no compromise. Discovery 5 (2017–2020) Range Rover Sport L494 Range Rover Vogue L405 Evoque L538 Rose Gold Finish Peel & Stick Laser Cut No Drilling Required Interior Trim 2017–2020 Overview The Land Rover Discovery 5, Range Rover Sport L494, Range Rover Vogue L405, and Range Rover Evoque L538 all share a refined interior philosophy — one where every surface, every detail, is expected to meet a high standard. The steering wheel, in particular, is the most tactile point of contact between driver and vehicle, and its button surrounds are among the most frequently noticed details in the cabin. This Rose Gold Steering Wheel Button Decorative Frame is designed to complement that philosophy precisely. Crafted with a premium rose gold finish and cut to exact tolerances using laser technology, each frame sits flush against the steering wheel button housing — eliminating the factory plain-plastic look and replacing it with something that genuinely looks like it belongs in a higher specification trim level. The application method is intentional: a high-strength peel-and-stick backing bonds cleanly to the existing surface without requiring removal of steering wheel components, adhesives, or specialist tools. The result is a lasting, rattle-free upgrade that looks factory-fitted from day one. What's Included 🔲 Decorative Frame × 2 Matching rose gold button surround frames for left and right steering wheel control clusters 📋 Pre-Applied Adhesive Backing High-bond 3M-style tape pre-fitted to each frame for immediate application 🧼 Cleaning Preparation Wipe Surface prep wipe included to ensure maximum adhesion on installation 📄 Installation Guide Step-by-step instruction sheet included in the package Product Highlights Precision laser-cut to match OEM steering wheel button housing dimensions exactly Premium rose gold finish — sophisticated, warm, and distinct from standard chrome trims Tool-free peel-and-stick installation — no disassembly of steering wheel required High-strength adhesive backing provides a permanent, rattle-free bond Compatible across four Land Rover and Range Rover model lines (2017–2020) Does not obscure, interfere with, or impede any steering wheel button function Resistant to UV fading and the temperature fluctuations typical of vehicle interiors Available in multiple colour options — rose gold, silver, carbon and gloss black variants Low-profile fit sits flush with surrounding trim for a factory-finished appearance Reversible upgrade — frames can be removed cleanly without damage to OEM surfaces Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Range Rover Vogue L405 2017–2020 Direct Fit Range Rover Sport L494 2017–2020 Direct Fit Range Rover Evoque L538 2017–2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 (2019+) 2019–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Easy — No Tools Required Park your vehicle and ensure the steering wheel is in a neutral, centred position with the engine off. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight. Use the included preparation wipe to thoroughly clean the surface of the steering wheel button housing. Remove any dust, oils, or residue and allow the surface to dry completely before proceeding. Test-fit both decorative frames against the button housings without removing the adhesive backing — confirm alignment, orientation, and that all button cutouts line up correctly. Peel the protective film from the adhesive backing on the first frame. Carefully align the frame over the button housing, starting from one edge and pressing firmly into place to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of the frame for 30–60 seconds to activate the adhesive bond. Repeat for the second frame on the opposite side. Allow the adhesive to cure for a minimum of 2 hours before regular use. Avoid operating the steering wheel controls forcefully during this initial cure period. ⚠ Please Note: Verify your specific vehicle's steering wheel button housing design before purchasing. While this frame is compatible with the 2017–2020 model years listed, minor manufacturing variations can occasionally exist across production runs and regional markets. If in doubt, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Elevate Every Drive At Victorious Automotive, every product we carry is chosen because it genuinely enhances the ownership experience of a Land Rover or Range Rover. This rose gold steering wheel frame is one of those rare upgrades — small in scale, significant in impact. Browse our full Discovery 5 and Range Rover collections to find everything your vehicle deserves. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · BMW · Interior Styling BMW M-Sport Steering Wheel Trim – Silver ABS – 2019–2023 Precision-fit steering wheel accent that elevates your interior with understated M-Sport elegance and premium durability. 2019–2023 M-Sport ABS Plastic Silver Finish Interior Trim Adhesive Install Overview If you drive a 2019–2023 BMW and want a quick, visible upgrade to your steering wheel surround, this silver M-Sport trim delivers understated refinement. The steering wheel is one of your hands' primary contact point with the car—it deserves intentional styling. This trim is engineered from high-quality ABS plastic, finished in a rich silver tone that complements both modern and classic BMW interiors. The trim is precision-cut to fit snugly around the steering wheel, creating a factory-spec appearance without any gaps or misalignment. Installation is straightforward: clean the mounting surface, apply the automotive-grade adhesive tape, and secure in place. Backed by ISO9001 certification, this piece combines aesthetic impact with proven durability. It resists UV degradation, maintains its finish under sunlight, and won't crack or warp with temperature changes. A subtle detail that transforms how your cockpit feels every time you get behind the wheel. What's Included ✦ Steering Wheel Trim Silver ABS plastic, pre-cut for precision fitment ⚙ Automotive Adhesive Tape High-tack bonding strip for secure, permanent installation 📋 Installation Guide Step-by-step instructions with prep and application notes Product Highlights Precision fitment for 2019–2023 BMW models—no trimming or modification needed High-quality ABS plastic with silver finish—durable, UV-resistant, scratch-resistant ISO9001 certified manufacturing—meets strict quality and material standards Simple adhesive installation—no tools, drilling, or professional labor required M-Sport aesthetic—subtle, aggressive detailing that enhances cockpit presence Lightweight design—adds visual impact without affecting steering feel or weight distribution Maintains factory appearance—seamless integration with OEM interior design language Temperature stable—won't warp, crack, or peel in extreme heat or cold Three colour options available—Silver, Red, and Carbon Fiber to match your style Easy removal—adhesive is strong but can be gently peeled away without damage to steering wheel Compatibility BMW Model Year Range Status 2-Series (F22, F23) 2019–2023 Direct Fit 3-Series (G20, G21) 2019–2023 Direct Fit 4-Series (G22, G23) 2020–2023 Direct Fit 5-Series (G30, G31) 2017–2023 Direct Fit M440i, M440i xDrive 2021–2023 Direct Fit M440i M-Sport Package 2021–2023 Direct Fit X3 (G01) 2018–2023 Not Compatible X5 (G05) 2019–2023 Not Compatible Note: Please verify your steering wheel design against product images before purchase. Some M-Sport models may require minor fitment adjustment. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure about compatibility. Installation Difficulty: Easy | Time: 15–20 Minutes Prepare the surface. Clean the steering wheel trim area thoroughly with a lint-free cloth and isopropyl alcohol. Allow to dry completely for at least 5 minutes. Position the trim. Carefully align the silver ABS trim against the steering wheel. Check alignment from multiple angles before committing adhesive. Apply adhesive tape. Remove the backing from the supplied automotive adhesive tape. Press firmly along the entire length of the trim, working from centre outward to eliminate air bubbles. Set and cure. Apply moderate pressure for 30 seconds. Allow adhesive to cure for 24 hours before using the steering wheel. Avoid washing or touching the trim during this period. Final inspection. Once cured, verify that the trim is fully bonded with no gaps, lifting, or movement when gently flexed. ⚠ Important: Do not install this trim on a warm steering wheel. Allow your vehicle interior to cool to room temperature first. The adhesive bonds best on cool, clean surfaces and will weaken if applied in direct sunlight or excessive heat. Specifications Property Value Material ABS Plastic (High-Impact) Finish Silver Metallic Length 30 cm Height 10 cm Width 15 cm Weight 200 g Type Interior Moulding / Trim Installation Method Automotive Adhesive Tape (Included) Certification ISO9001 Warranty 30-Day Money-Back Guarantee Ready to Refine Your Cockpit? This silver M-Sport steering wheel trim is a small detail with outsized visual impact. It's the kind of upgrade that makes you smile every time you grip the wheel, and it's engineered to last the life of your vehicle. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 📦 Worldwide Shipping – DHL, FedEx, UPS, TNT ↩ 30-Day Guarantee – Full Money Back ☎ +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with BMW, BMW M, Land Rover, Range Rover, Jaguar Land Rover (JLR), or any other vehicle manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for fitment only and does not imply endorsement, sponsorship, or authorisation by any manufacturer.

BMW · Interior · Steering Wheel Trim Carbon Fibre M-Sport ABS Steering Wheel Trim Premium interior upgrade with authentic carbon fibre styling for BMW cockpits (2018–2020). 2018–2020 Carbon Fibre ABS Plastic M-Sport Interior Moulding Overview If you own a BMW from 2018 to 2020, the interior is the first thing you and your passengers experience every time you get behind the wheel. Stock steering wheel bezels feel generic and dated. This carbon fibre M-sport ABS steering wheel trim upgrades that critical focal point with aggressive, factory-correct styling that transforms your cockpit instantly. The trim is engineered from premium ABS plastic with a genuine carbon fibre finish, delivering the visual impact of carbon without the weight penalty or cost of true carbon fibre. The LLK2355 model fits seamlessly into the M-sport aesthetic, adding depth and aggression to your dashboard. Available in three finishes—silver, red, and carbon fibre—so you can match your car's personality. Installation is straightforward: the back is pre-fitted with automotive-grade adhesive tape, so no drilling, no glue mess, no permanent modifications. Fits 2018–2020 BMW models. ISO9001 certified manufacturing ensures durability and precision fit. This is the kind of detail that separates enthusiasts from the ordinary. What's Included 📦 Carbon Fibre Steering Wheel Trim LLK2355 model, pre-taped 🔧 Automotive Adhesive Tape Pre-applied, ready to install 🎨 Three Finish Options Silver, red, or carbon fibre ✅ ISO9001 Certified Quality-assured manufacturing Product Highlights M-sport styling integrated into steering wheel bezel Premium carbon fibre finish on durable ABS plastic Lightweight design—only 200g Pre-taped with automotive-grade adhesive Three colour options: silver, red, carbon fibre Fits 2018–2020 BMW models perfectly No drilling or permanent modifications required ISO9001 quality-certified manufacturing Compact dimensions: 30 × 15 × 10 cm Easy 5-minute installation process Fitment & Compatibility BMW Model / Year Compatibility BMW 3 Series (2018–2020) Direct Fit BMW 5 Series (2018–2020) Direct Fit BMW X3 / X4 / X5 (2018–2020) Direct Fit BMW M-Sport Models (2018–2020) Direct Fit BMW Models (2017 or earlier) Not Compatible BMW Models (2021 and later) Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 5 minutes Prepare the steering wheel. Clean the steering wheel bezel area with a soft, dry cloth. Remove any dust, oil, or residue. Position the trim. Align the carbon fibre trim with the steering wheel bezel, ensuring it sits flush and level. Apply the trim. Press firmly from the centre outward to activate the pre-applied adhesive tape. Hold for 30 seconds. Check alignment. Step back and visually confirm the trim is straight and sits evenly on all edges. Let cure. Wait 24 hours before heavy use to allow the adhesive to fully bond. Important: Ensure your steering wheel is clean and dry before installation. Do not apply in temperatures below 10°C or above 40°C, as adhesive performance may be compromised. Upgrade Your Cockpit Today Small details make the biggest impact. This steering wheel trim is the kind of upgrade that catches your eye every single drive—and impresses anyone who gets in your car. M-sport aggression, authentic styling, zero hassle. Add to Cart Use code 22GET20 for 20% off when you buy 2+ items. 4.9/5 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping ✓ Expert support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names and vehicle designations are used for fitment reference only. Product specifications subject to change without notice.

Victorious · BMW · Interior Trim Red ABS Plastic Steering Wheel Trim for BMW M-Sport 2018–2020 Precision-engineered interior upgrade that combines factory-fit accuracy with vibrant aesthetic refinement for your M-Sport steering wheel. F87 M2 · F80 M3 · F82 M4 2018–2020 ABS Plastic Easy Installation Red/Silver/Carbon Overview BMW M-Sport models demand finishes that match their precision engineering and aggressive aesthetic. This red ABS plastic steering wheel trim delivers exactly that—a boutique interior accent that elevates the cabin without requiring extensive modification. Manufactured from premium-grade ABS plastic with a durable textured finish, this trim sits perfectly on the steering wheel's upper spoke section. Its contours are mapped directly to the 2018–2020 M-Sport platform, ensuring seamless integration with zero gaps or misalignment. The red finish complements carbon fiber trim, brushed aluminum, and factory leather beautifully. Installation takes under 15 minutes using the included automotive adhesive tape. No tools, heat, or fasteners needed. The finish is resistant to UV degradation and daily wear, maintaining its appearance through seasons of commuting and spirited driving. What's Included 🎨 Steering Wheel Trim Red ABS plastic, precision-molded 🔌 Adhesive Tape Automotive-grade dual-sided 📋 Installation Guide Step-by-step with tips Product Highlights Precision-engineered for perfect factory-fit alignment Premium ABS plastic with textured finish UV-resistant and fade-proof color Quick adhesive installation—no drilling or clips Designed exclusively for M-Sport models 2018–2020 Available in red, silver, and carbon fiber variants Seamless integration with OEM interior trim Durable enough for daily commuting and spirited driving Removable without permanent damage to wheel Enhances cabin personalization and visual impact Compatibility BMW Model Year Compatibility M2 (F87) 2018–2020 Direct Fit M3 (F80) 2018–2020 Direct Fit M4 (F82) 2018–2020 Direct Fit M340i / M440i 2019–2020 Direct Fit Pre-2018 M-Sport 2013–2017 Not Compatible Non-M Models Any Year Not Compatible Installation Difficulty Level: Beginner | Time: 10–15 minutes Prepare the wheel: Clean the steering wheel's upper spoke section thoroughly with a microfiber cloth and mild soap. Allow to dry completely. Remove adhesive backing: Carefully peel away the protective film from one side of the included adhesive tape, exposing the sticky surface. Apply tape to trim: Press the adhesive tape firmly onto the back of the red steering wheel trim, ensuring full contact across all edges. Position on wheel: Align the trim with the steering wheel's upper spoke. Start from the center and press outward to eliminate air bubbles. Secure and cure: Apply gentle pressure for 30 seconds, then allow adhesive to cure for 2–4 hours before driving. Final inspection: Verify all edges are flush and no gaps exist between trim and wheel surface. Note: Ensure the wheel surface is completely dry before applying adhesive. Moisture will compromise bond strength. If removing the trim later, use isopropyl alcohol to dissolve residual adhesive gently. Ready to Elevate Your M-Sport Interior? This red steering wheel trim transforms your cabin into a more personalized, visually cohesive space. Pair it with other M-Sport accents for a complete interior refresh. Shop Red Steering Wheel Trim Use code 22GET20 for 20% off when you order 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL shipping 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW subsidiary. All product names and references are used for compatibility identification only. Modifications made to your vehicle may void manufacturer warranty. Always consult your BMW dealer before installing aftermarket components.

Victorious Automotive · Mercedes G Class · Exterior Trim Glossy Black Rear Side Air Vent Trim for Mercedes Benz G Class Premium ABS vent trim that adds refined detail and aggressive character to your G-Class exterior. G Class ABS Material Glossy Black Carbon Fiber Option Adhesive Installation Overview The Mercedes-Benz G Class demands refinement at every angle. These Glossy Black Rear Side Air Vent Trims are engineered to enhance your G-Class's aggressive stance while adding a touch of premium detailing that catches the eye. Crafted from ISO9001-certified ABS plastic, these trims replace the standard vent surrounds with sleek, contemporary styling available in rich glossy black or dynamic carbon fiber finishes. Each pair is precision-fitted to match your vehicle's body contours and designed for hassle-free installation using supplied automotive-grade adhesive tape. Whether you're refining your G-Class for the road or completing a subtle exterior upgrade, these trims deliver understated luxury with zero compromise on durability or fitment quality. What's Included ✦ 1 Pair of Rear Side Air Vent Trims Left and right, precision-fitted ✦ Automotive Adhesive Tape Pre-applied for secure bonding ✦ Installation Guide Step-by-step surface prep and fitment ✦ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights ISO9001-certified ABS construction for durability Available in glossy black and carbon fiber finishes Custom-fit design for select G Class model years Pre-applied automotive adhesive for secure bonding Lightweight at just 200g per pair Refined aesthetics that complement OEM styling Resistant to UV fade and weathering No drilling or permanent modifications required Easy removal without surface damage Paired with expert installation support Compatibility Model Year Range Variant Fitment 2019–2024 G Class (W464) Direct Fit 2015–2018 G Class (W463A) Direct Fit 2000–2014 G Class (W463) Not Compatible 2024+ G Class (New Generation) Not Compatible Note: Please verify your vehicle's year and generation before ordering. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to confirm exact fitment. Installation ⏱ Difficulty: Beginner | Time: 15–20 minutes Prepare the surface: Clean the rear side air vent area thoroughly with a microfiber cloth and isopropyl alcohol. Ensure the surface is completely dry. Inspect fitment: Dry-fit each trim to confirm alignment and sizing. Do not apply adhesive tape yet. Position the trim: Carefully align the left trim to the rear side vent. Check all edges for flush contact with the vehicle body. Apply adhesive: Peel back the protective backing from the adhesive tape and press firmly onto the vent area, working from the center outward to avoid air bubbles. Repeat on right side: Follow steps 3–4 for the right rear side vent trim. Allow curing time: Do not disturb the vehicle for at least 24 hours to allow full adhesive bond. ⚠ Installation is permanent. Please confirm fitment before applying adhesive. If unsure, contact our team for guidance. Why Victorious? We've been the trusted source for premium Mercedes G Class and Land Rover accessories since day one. Every product in our collection is tested for fitment, durability, and finish quality. With over 12,300 verified 4.9-star reviews, our customers know we stand behind every upgrade. Ready to Elevate Your G Class? Add these refined rear side vent trims to your Mercedes and experience the difference that premium detailing makes. Fast worldwide shipping, expert support, and a 30-day money-back guarantee. Shop G Class Accessories Use code 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 · 12,300+ Reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent accessory retailer and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility is provided in good faith; please verify fitment before purchase.

Victorious · Mercedes G-Class · Exterior Trim Rear Bumper Trim for Mercedes-Benz G-Class W463 Premium carbon fibre and black trim options that elevate your G Wagon's rear bumper with sophisticated, purpose-built detailing. W463 G-Wagon ABS Material Carbon Fibre Option Direct Fit Tool-Free Install Overview The Mercedes-Benz G-Class W463 commands respect on every terrain. Its iconic silhouette deserves equally iconic detailing. These rear bumper trims are engineered to enhance that commanding presence, adding precision-crafted edges and refined finishes that complement the G Wagon's unmistakable geometry. Each trim is machined from high-quality ABS thermoplastic and finished in either deep gloss black or premium carbon fibre weave. They're designed for direct fitment to the W463 rear bumper, requiring no drilling, cutting, or permanent modifications—just clean, confident installation that respects your vehicle's integrity. Whether you're upgrading for aesthetics or adding a functional accent that catches light and shadow, these trims deliver the refinement G-Class owners expect from their investment. What's Included 🎨 2 x Rear Bumper Trims Left and right pair for complete coverage 📖 Installation Manual Step-by-step guide with torque specs 🔒 Grade-A Fasteners Stainless hardware included ✓ Fitment Guarantee 30 days to confirm perfect fit Product Highlights Premium ABS construction with UV-resistant finishes Two luxury finishes: gloss black or carbon fibre weave Direct-fit design—no cutting or modifications required Seamless integration with factory bumper geometry Durable, impact-resistant thermoplastic materials Weather-sealed for year-round protection Lightweight design—no performance impact Easy tool-free installation (10–15 minutes) Stainless fasteners prevent corrosion Maintains factory warranty compliance Compatibility Model Generation Years Fitment Mercedes-Benz G-Class W463 (Classic/Facelift) 2004–2018 Direct Fit Mercedes-AMG G63 W463 2004–2018 Direct Fit Mercedes-AMG G65 W463 2004–2018 Direct Fit Mercedes-Benz G-Class W464 (New Generation) 2018+ Verify Fitment Note: Confirm your model year and W463 designation before purchase. W464 fitment requires separate verification. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) for compatibility confirmation. Installation Difficulty Level: Easy | Time: 10–15 Minutes Prepare. Clean the rear bumper surface with mild soap and water. Dry completely and allow 15 minutes for full cure. Position. Align the left trim against the bumper edge. Start fasteners by hand to ensure flush contact. Secure. Tighten fasteners in a cross pattern using the provided hex key. Do not over-tighten (recommended torque: 1.5–2.0 Nm). Repeat. Install the right trim following the same process. Inspect. Check both trims for gaps or misalignment. Adjust fasteners if needed. Final Check. Step back and confirm even panel gaps and symmetrical fitment. Professional Installation Recommended: While straightforward for experienced DIY enthusiasts, we recommend professional fitment to ensure perfect alignment and preserve your warranty. Contact a local Mercedes specialist. Complete Your G-Class Vision These rear bumper trims are the finishing detail your G Wagon deserves. Engineered for precision, built for durability, backed by a 30-day money-back guarantee. Shop G-Class Collection Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars ✓ 12,300+ Verified Reviews 🌍 Worldwide DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, AMG, or Daimler AG. All product names and logos are registered trademarks of their respective manufacturers. This product is designed for aftermarket customisation and does not void manufacturer warranty when installed correctly.

```html Jaguar · E-PACE · Interior Trim Carbon Fiber Rear Air Conditioning Vent Frame Trim Elevate your E-PACE interior with precision-engineered carbon-style AC vent trim that combines modern aesthetics with factory-fit engineering. E-PACE 2018–2020 Carbon Fiber Style Rear AC Vent ABS Material Direct Fit Overview The Jaguar E-PACE is a refined compact luxury SUV that rewards drivers with sophisticated design and cutting-edge technology. Every detail—from its sculpted exterior to its intuitive cabin layout—reflects Jaguar's commitment to premium engineering. Interior trim upgrades are the perfect way to personalise that refined aesthetic and add a contemporary edge. This carbon fiber-style rear air conditioning vent frame trim is precision-cut from premium-grade ABS plastic and finished with an authentic carbon weave pattern. Designed specifically for E-PACE models (2018–2020), it replaces the factory AC vent surround with a modern, high-contrast accent that catches light beautifully and creates visual depth in the cabin. Installation is straightforward—no modification required. The trim clips directly into place, requiring only hand tools and 15–20 minutes of work. Whether you're refreshing a single accent or planning a comprehensive cabin upgrade, this vent trim delivers measurable impact at an accessible price point. What's Included 📦 Rear AC Vent Frame (1x) Carbon fiber-style ABS trim ring 🔧 Installation Hardware Pre-fitted clips & fasteners included 📖 Fitting Guide Step-by-step photo instructions ✓ Quality Assurance Factory-tested before dispatch Highlights Carbon fiber weave finish—authentic styling without the cost Precision-engineered ABS plastic—lightweight, impact-resistant, UV-stable Direct-fit design—no cutting, drilling, or modification required Factory-matched proportions—seamless visual integration with cabin design Pre-fitted clips—install with hand tools only (no adhesives needed) Enhanced cabin depth—modern contrast accent elevates interior ambiance Temperature-resistant material—safe for automotive cabin environments Easy removal—completely reversible if desired Comprehensive documentation—fitting guide included in English Premium packaging—protected shipping; 30-day money-back guarantee Compatibility Model Year Range Engine Fit Jaguar E-PACE 2018–2020 All petrol / diesel Direct Fit Jaguar E-PACE 2021+ All models Not Compatible Jaguar F-PACE 2015–2024 All models Not Compatible Jaguar XE / XF All years All models Not Compatible Note: Confirm your vehicle's build year and rear AC vent design before ordering. Contact us at +44 203 943 9919 if unsure. Installation Notes Difficulty: Beginner | Time: 15–20 minutes Open the rear doors and locate the factory AC vent surround on the cabin wall (behind rear seats, driver and passenger sides). Gently prise the factory vent frame away from the wall using a plastic trim removal tool or soft card (do not force—clips will release). Disconnect any wiring or sensor connectors if present (varies by trim level). Position the new carbon-style trim frame in place, ensuring clips align with mounting points. Press firmly until all clips snap into place and the trim sits flush with the surrounding panel. Reconnect any wiring and test ventilation function. Close rear doors and admire your upgraded cabin finish. Tip: Work in good light or use a headlamp. If clips feel tight, apply gentle upward pressure rather than lateral force to avoid damage to the trim mounting bosses. Ready to Upgrade Your E-PACE? Transform your cabin with authentic carbon-style trim that speaks to design-focused owners. Expert fitting support available—contact our team anytime. Shop Carbon Trim Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping via DHL & FedEx ✓ 30-day money-back guarantee ☎️ +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Jaguar Cars Ltd., or any official Jaguar brand entity. All product names and vehicle names are used for identification and compatibility purposes only. Vehicle illustrations are representative and may not reflect exact trim or specification. Please verify compatibility with your specific vehicle before purchase. Jaguar is a registered trademark of Jaguar Land Rover Ltd. ```

Victorious Automotive · Mercedes · Exterior Styling 2020 Mercedes GLC Quad Exhaust Muffler Trim – Premium Chrome Tailpipe Covers Elevate your GLC's rear end with precision-engineered quad exhaust covers that deliver a factory-finished, premium look. 2020 GLC Stainless Steel Chrome Finish Custom Fit Tool-Free Install Overview The 2020 Mercedes-Benz GLC deserves an exhaust presentation that matches its sophisticated engineering. This quad muffler trim set brings that premium dealership-quality aesthetic to your rear bumper, transforming the tailpipe area with a polished, intentional design that complements the GLC's modern lines. Built from high-grade stainless steel with a flawless chrome finish, these custom-fit covers integrate seamlessly with your OEM exhaust system. There's no modification required—they sit flush with your existing tailpipes and are secured with a straightforward installation process that takes minutes, not hours. Whether you're seeking a subtle refinement or a visual upgrade that catches the eye, these quad exhaust covers deliver presence without compromise. They're engineered to resist corrosion, thermal stress, and road salt—ensuring your GLC looks sharp for years to come. What's Included 🔲 2x Muffler Trim Covers Precision-engineered chrome covers 📋 Installation Guide Clear, step-by-step visual instructions Product Highlights Custom-fit design engineered specifically for 2020 Mercedes GLC models Premium stainless steel construction resists rust and corrosion Mirror-polished chrome finish reflects light beautifully Seamless integration with OEM exhaust system—no modifications needed Tool-free installation—secure fit without drilling or welding Precision tolerance ensures factory-aligned appearance Thermal-resistant coating handles high exhaust temperatures Durable enough for daily driving and harsh climates Enhances sportier visual profile of your GLC Backed by our 30-day money-back guarantee Compatibility Model Year Variant Compatibility 2020 Mercedes-Benz GLC All GLC Trims (200, 300, 300 Coupe, 43 AMG) Direct Fit 2019 and Earlier Previous Generation GLC Not Compatible 2021 and Later Updated GLC (W206) Not Compatible Verify your model year before purchase. These covers are engineered exclusively for 2020 GLC models. Please confirm your vehicle year and trim level for guaranteed compatibility. Installation Difficulty: Easy | Time: 15–20 Minutes Ensure your vehicle is parked on a level surface with the engine cool. Position the first trim cover over the driver-side tailpipe, aligning the edges carefully. Apply gentle, steady pressure until the cover seats fully—you'll feel it click into place. Repeat for the passenger-side cover, ensuring both sit symmetrically. Check alignment from behind the vehicle and make minor adjustments if needed. Allow 1 hour before driving for the adhesive seal to cure completely. Pro Tip: Clean the tailpipe exterior with a dry cloth before installation for optimal grip and finish. Do not force the covers—they should slide on smoothly. If resistance occurs, check alignment and try again. Finish Your GLC's Look Premium exhaust styling should be effortless. With our quad muffler trim set, you get the polished appearance of a factory upgrade without the dealership markup. Fast shipping, expert support, and a full money-back guarantee—that's the Victorious promise. Add to Cart Use code 22GET20 for 20% off when you purchase any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official manufacturer. All product names, logos, and brands remain the property of their respective owners. This product is designed for fitment and aesthetic enhancement only. Always verify compatibility with your specific vehicle before purchase. Installation should be performed by a qualified professional if you are uncertain. We are not liable for improper installation or vehicle damage resulting from misuse.

Victorious Automotive · Range Rover Vogue L405 · Interior Trim Range Rover Vogue L405 Interior Door Trim Strips (2013–2020) Precision-fit metallic TPU door trim strips that bring a refined, factory-finish aesthetic to every door panel of your L405 Vogue. Range Rover Vogue L405 2013–2020 High-Grade TPU Metallic Finish Peel & Stick Set of 4 Interior Upgrade No Drilling Required Overview The Range Rover Vogue L405 is a vehicle that sets the benchmark for luxury SUV interiors — and every detail matters. From the stitched leather door cards to the brushed metal accents, owners of the L405 understand that the cabin is as much a statement as the exterior. Over time, however, door trim edges can show signs of wear, scratches, or simply lack the visual definition that distinguishes a truly refined interior. These Interior Door Trim Strips are engineered specifically for the L405 Vogue platform, profiling the exact contours and dimensions of the 2013–2020 model's door cards. Crafted from high-grade TPU with a premium metallic finish, each strip mirrors the factory aesthetic while adding a subtle, elegant accent line across all four doors. The result is an interior that looks cohesive, considered, and unmistakably premium. Installation requires no specialist tools, no drilling, and no professional fitting — the pre-applied adhesive backing bonds cleanly to clean, dry door panels in minutes. Whether you're refreshing a well-loved L405 or adding a finishing touch to a recent purchase, these strips deliver an upgrade that punches well above their price point. What's Included 🚪 Front Left Door Strip Pre-cut for L405 driver door panel 🚪 Front Right Door Strip Pre-cut for L405 passenger door panel 🚪 Rear Left Door Strip Matched profile for rear door card 🚪 Rear Right Door Strip Matched profile for rear door card 🧴 Cleaning Wipe Surface prep wipe for optimal adhesion 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut specifically for the Range Rover Vogue L405 door card profile High-grade TPU construction — flexible, impact-resistant, and long-lasting Premium metallic finish complements factory chrome and brushed aluminium trim Peel-and-stick application — no tools, no drilling, no professional fitting needed Full set of four strips for a consistent, all-door cabin transformation Resistant to UV fading, heat, and humidity inside the cabin environment Adhesive backing rated for long-term bond on automotive-grade interior surfaces Protects door card edges from everyday scuffs, scratches, and contact wear Compatible with all L405 trim levels including SE, HSE, Autobiography, and SVAutobiography Reversible upgrade — strips can be removed cleanly without damaging door cards Compatibility Vehicle Model Code Years Trim Level Fitment Range Rover Vogue L405 2013–2020 SE Direct Fit Range Rover Vogue L405 2013–2020 HSE Direct Fit Range Rover Vogue L405 2013–2020 Autobiography Direct Fit Range Rover Vogue L405 2013–2020 SVAutobiography Direct Fit Range Rover Vogue L460 2022–2026 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Range Rover Velar L560 2018–2022 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔧 Tools Required: None Open all four doors and allow the interior to reach ambient room temperature — cold surfaces can reduce initial adhesion. Using the included cleaning wipe (or a 70% isopropyl alcohol wipe), thoroughly clean each door card surface where the strip will be applied. Remove any dust, grease, or residue and allow to dry fully. Dry-fit each strip against the door panel before committing — confirm alignment along the trim edge and note the correct positioning for each door. Peel back approximately 2–3cm of the protective backing from one end of the strip. Begin pressing firmly from one end, slowly peeling and pressing as you work along the full length of the door card. Once positioned, run your thumb or a clean cloth firmly along the entire strip to activate the adhesive bond across its full length. Repeat for all four doors. Avoid washing the interior surfaces or applying any conditioners near the strips for 24 hours to allow the adhesive to fully cure. ⚠ Please Note: Do not apply to surfaces that are damp, freshly conditioned with silicone-based products, or heavily textured. For best long-term results, avoid direct contact with steam cleaning equipment near the strip edges after installation. Complete Your L405 Vogue Interior Browse the full range of interior and exterior accessories designed specifically for the Range Rover Vogue L405 — every product precision-matched to your vehicle. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of vehicle compatibility identification.

Tesla · Model S & Model X · Interior Trim Rear Climate Carbon Trim for Tesla Model S & Model X Premium carbon fibre rear vent covers that elevate your cabin's interior aesthetic with effortless, precision-fit installation. Model S 2016–2019 Model X 2016–2019 Carbon Fibre Look Pre-Applied Adhesive Two-Piece Set Overview Tesla Model S and Model X owners demand refinement in every detail. Your vehicle's rear climate control vents deserve the same attention to finish as the rest of your cabin—and these carbon fibre style trim covers deliver exactly that. Engineered for seamless integration, they transform a functional component into a design statement. Crafted from high-quality TPU with a sleek carbon fibre finish, these covers are laser-cut to precision tolerances. Installation takes minutes thanks to pre-applied adhesive, and the result is a sophisticated, cohesive look that complements modern minimalist interiors. Whether you're refining an existing aesthetic or completing a bespoke cabin upgrade, this two-piece set is the finishing touch your Model S or Model X deserves. What's Included 📦 Rear Climate Carbon Trim Set Two precision-cut pieces, ready to install ✦ Pre-Applied Adhesive No extra tools or supplies needed Product Highlights High-quality TPU construction for durability and longevity Authentic carbon fibre style finish Precision laser-cut for perfect fit every time Pre-applied 3M adhesive—no mess, no guesswork Two-piece rear vent cover set included Non-intrusive design complements original cabin lines Effortless installation in under 10 minutes Compatible with 2016–2019 Model S and Model X Enhances interior sophistication and visual depth Minimal maintenance—wipe clean with soft cloth Compatibility Model Years Status Tesla Model S 2016–2019 Direct Fit Tesla Model X 2016–2019 Direct Fit Tesla Model S 2020+ Not Compatible Tesla Model X 2020+ Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Ensure the rear climate vent surfaces are clean and dry. Use a microfibre cloth and mild isopropyl alcohol if needed. Allow to air dry completely. Carefully peel the backing from the first carbon trim piece, exposing the adhesive. Align the trim with the rear vent opening, then press firmly from the centre outward to avoid air bubbles. Repeat for the second piece on the opposite side. Allow 24 hours for the adhesive to cure fully before opening rear vents or adjusting climate controls. Important: Do not disturb the trim for 24 hours after installation. Ensure surfaces are completely clean and dry before application for optimal adhesion. Elevate Your Cabin Transform your rear climate vents from functional to refined. These carbon fibre trim pieces are the detail-conscious upgrade your Model S or Model X has been waiting for—premium finish, seamless fit, simple installation. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide Shipping via DHL, FedEx, UPS +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc. or any of its subsidiaries. Tesla is a registered trademark of Tesla, Inc. All references to Tesla vehicle models are for compatibility and identification purposes only.

Victorious · Tesla Model 3 · Interior Storage Armrest Storage Organizer for Tesla Model 3 Purpose-built organizer that transforms your Model 3's armrest box into a tidy, accessible storage solution. Model 3 Interior 2017–2019 ABS Material Transparent & Black Rust-Free Overview If you own a Tesla Model 3 from 2017 onwards, you know that the armrest storage box is a valuable space—but without proper organization, it quickly becomes cluttered. This Storage Organizer is engineered to fit precisely into your Model 3's armrest compartment, creating dedicated sections for everyday essentials like sunglasses, charging cables, cards, and small accessories. Manufactured from durable ABS plastic, this organizer resists rust and degradation, even with daily use. The transparent design lets you see exactly what you've stored at a glance, while the sleek profile doesn't obstruct the natural flow of your interior. Available in clear or black finishes, it complements both minimalist and refined cabin aesthetics. Installation is straightforward—simply drop it into place. No fasteners, no drilling, no permanent modifications. And because it's designed specifically for the Model 3's geometry, it sits flush without shifting or rattling during normal driving. What's Included 📦 1x Storage Organizer ABS armrest insert, clear or black Product Highlights Precision-fit design for Tesla Model 3 armrest box Durable ABS construction, rust and fade resistant Transparent option for quick visibility of contents Keeps small items organized and accessible Available in clear and black finishes No drilling or permanent fasteners required Easy installation and removal Minimalist aesthetic suits Model 3 interior Long-lasting durability for everyday use Low-maintenance and simple to clean Compatibility Tesla Model 3 Year Compatibility 2017–2019 Direct Fit 2020–2024 Not Compatible Model 3 Performance Direct Fit Model 3 Standard Range Direct Fit Installation Notes Installation Difficulty: Minimal | Time: 2 Minutes Open your Model 3 armrest storage box. Orient the organizer to match your armrest compartment dimensions (refer to product images for sizing). Gently place the organizer inside the armrest box. Ensure it sits flat and doesn't interfere with the lid closing. Test by opening and closing the armrest lid to confirm fit. Note: This organizer is designed for the 2017–2019 Model 3 armrest geometry. If your vehicle was manufactured after 2019, the compartment size may differ. Refer to product images to confirm dimensions before purchase. Ready to Organize Your Model 3? Transform your armrest storage from cluttered to orderly with this precision-fit organizer. Keep your cabin tidy, your essentials within reach, and your driving experience distraction-free. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars – 12,300+ reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with Tesla, Inc., or any official Tesla dealer or service centre. All product names, logos, and trademarks are the property of their respective owners. This product is designed for fit and function enhancement only and does not modify vehicle performance or safety systems.

BMW Mini · F55 F56 F57 · Interior Styling Carbon Fiber Hand Brake Shell & Parking Lever Trim for Mini Cooper S Premium carbon fiber hand brake cover elevates your Mini's interior with authentic motorsport styling and flawless craftsmanship. F55 F56 F57 Carbon Fiber Hand Brake Cover Interior Trim Parking Lever Decoration Overview The Mini Cooper S F55, F56, and F57 deserve interior accents that match the car's dynamic character. This carbon fiber hand brake shell and parking lever cover replaces the standard plastic housing with genuine 3K carbon fiber—the same material favored in motorsport and high-performance vehicles worldwide. It's a single, precision-engineered component that transforms your cabin with one of the most visible daily touchpoints. Designed for drivers who understand that true craftsmanship shows in the details. Every glance at your hand brake now reflects your commitment to quality. The carbon weave catches light beautifully, adding depth and visual interest without screaming for attention. It's understated, premium, and distinctly sporty—everything a Mini enthusiast expects. Installation is straightforward and requires no drilling or modifications. The cover sits perfectly over the original hand brake assembly, integrating seamlessly with your Mini's cockpit. One piece, two-minute job, lifelong impression. What's Included 📦 Carbon Fiber Hand Brake Shell 1× genuine 3K carbon weave cover ✓ Direct Fit Design No drilling, modification, or adapters needed 🛡️ Quality Assured Brand new, OEM-grade construction ⚡ Easy Installation Fits directly over existing lever assembly Product Highlights Genuine 3K carbon fiber weave construction Authentic motorsport aesthetic Perfect fit for F55, F56, F57 platforms Lightweight and durable material Resists fading and UV damage Precision-engineered tolerances No tools or modifications required Enhances interior visual appeal instantly Direct replacement for parking lever housing Premium finish matches modern Mini interiors Compatibility Model Generation Years Compatibility Mini Cooper F55 (3-Door) 2014–2023 Direct Fit Mini Cooper S F55 (3-Door) 2014–2023 Direct Fit Mini Cooper F56 (5-Door) 2014–2023 Direct Fit Mini Cooper S F56 (5-Door) 2014–2023 Direct Fit Mini Cooper SE F56 (Electric) 2019–2023 Direct Fit Mini Convertible F57 2015–2023 Direct Fit Mini John Cooper Works F56/F57 2014–2023 Direct Fit Mini Countryman F60 and earlier 2010–2017 Not Compatible Installation Hand Brake Shell Installation — Difficulty: Easy | Time: 5 mins Open your Mini's driver door and locate the hand brake lever assembly in the center console. Gently lift the existing plastic hand brake shell or gearshift surround trim if fitted. Position the carbon fiber shell over the hand brake lever mechanism, ensuring it aligns with the grip area and parking button. Press firmly and evenly until the shell seats fully—you'll hear a soft click when properly positioned. Test the hand brake function to confirm smooth operation and no binding. Step back and enjoy your upgraded interior. Note: Do not force the shell onto the lever. If resistance is felt, check alignment and remove any dust or debris from the assembly first. The fit is engineered to be snug but not forceful. Elevate Your Mini's Interior Carbon fiber isn't just about looks—it's a statement. Your Mini Cooper S deserves trim that reflects its spirit. This hand brake shell transforms a daily touchpoint into a premium detail you'll notice and appreciate every single time you drive. Shop This Cover Use code 22GET20 for 20% off when you order any 2 items. 4.9★ 12,300+ Reviews 🌍 Ships Worldwide ✓ 30-Day Money Back 📞 UK Support Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to BMW, Mini, or Jaguar Land Rover. All vehicle names, logos, and brands are the property of their respective manufacturers. Product compatibility information provided for reference only; always verify fitment with your vehicle's documentation before purchase.

Victorious Automotive · Range Rover Evoque L551 · Exterior Styling ABS Black Front Fog Lamp Frame Trim – Range Rover Evoque L551 (2019–2020) A precision-formed ABS fog light surround trim that adds a purposeful, blacked-out finish to the front fascia of the 2019–2020 Range Rover Evoque L551 — no drilling, no fuss. Evoque L551 2019–2020 ABS Plastic Gloss Black Fog Lamp Trim Exterior Styling Adhesive Fit ISO9001 Certified 200g No Drilling Required Overview The Range Rover Evoque L551 — introduced in 2019 — represents Land Rover's most refined interpretation of the compact luxury SUV. Its sculpted front end, with its bold lower fascia and integrated fog lamp housings, is one of the most distinctive design features on the vehicle. Keeping that detailing looking sharp and intentional matters to owners who take pride in every visual aspect of their Evoque. This front fog lamp frame trim is precision-manufactured from high-grade ABS plastic in a deep gloss black finish. Engineered specifically for the 2019–2020 Evoque L551 platform, each piece is contoured to follow the exact profile of the factory fog lamp recess — ensuring a flush, factory-quality appearance that looks like it was always part of the vehicle's design language. Where the standard fog lamp surrounds can appear understated or, over time, show the effects of road grime and UV exposure, this ABS trim overlay introduces a clean, dark contrast that complements both the Evoque's body colour and its wider design intent. The result is a subtly sportier, more defined front end — without modification, body shop visits, or permanent changes to the vehicle. What's Included 🔲 Fog Lamp Frame Trim Set ABS gloss black surround pieces, pre-cut to fit 🔧 Automotive Adhesive Tape Pre-applied 3M-style backing tape for secure fitment 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-moulded specifically for the Evoque L551 (2019–2020) front fog lamp recess High-grade ABS plastic construction — durable, lightweight, and UV-resistant Gloss black finish adds a bold, blacked-out contrast to the front fascia Adhesive-backed installation — no drilling, cutting, or permanent modification ISO9001-certified production quality for consistent fit and finish Weighs just 200g — no impact on vehicle aerodynamics or performance 31cm × 15cm × 5cm — engineered to match OEM fog lamp housing dimensions Resistant to road wash, car cleaning products, and everyday weathering Fully reversible — remove cleanly without damage to original paintwork Enhances the Evoque's front-end presence with a more defined, sporty character Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the fog lamp surround area on your Evoque's front bumper using isopropyl alcohol or a panel wipe — remove all dirt, wax, and grease residue for maximum adhesion. Allow the surface to dry completely. In cold weather, gently warm the bumper surface and the adhesive backing with a heat gun or hairdryer to improve bond strength. Dry-fit each trim piece without removing the adhesive backing to confirm alignment and positioning before committing to placement. Peel back the adhesive tape backing and carefully align the trim piece from one edge, pressing firmly along the full length to avoid air pockets or misalignment. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before washing the vehicle. ⚠ Note: Do not install in temperatures below 5°C (41°F) as this may significantly reduce adhesive performance. Ensure the bumper surface is completely dry and free of silicone-based products prior to fitting. This trim is designed for the 2019–2020 Evoque L551 only — do not attempt to fit to earlier L538 models as the fog lamp housing dimensions differ. Complete Your Evoque's Look Explore the full range of exterior styling accessories for the Range Rover Evoque L551 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious · Mercedes-Benz · Exterior Trim Glossy Black ABS Chrome Fender Trim for Mercedes-Benz E-Class W213 & C-Class W205 Premium side fender trim upgrade that adds aggressive styling and seamless integration for modern Mercedes luxury saloons. W213 / W205 2016–2023 ABS Chrome E63s AMG Compatible Glossy Black Direct Fit Overview Designed specifically for the Mercedes-Benz E-Class W213 (2016–2023) and C-Class W205 platform, this two-piece glossy black ABS chrome fender trim set delivers a factory-finished upgrade that elevates your vehicle's presence. Compatible with E63s AMG variants, these trims integrate seamlessly with OEM body lines for a cohesive, premium aesthetic. Precision-engineered from high-quality ABS material with chrome detailing, this set offers exceptional durability against weather, UV exposure, and daily road use. The glossy black finish pairs beautifully with both light and dark paintwork, while the polished chrome accents add a touch of understated luxury that catches light beautifully. Installation is straightforward and non-invasive, requiring no drilling or permanent modification. Whether you're aiming for a subtle performance upgrade or planning a comprehensive exterior refresh, these fender trims are a game-changer for discerning Mercedes enthusiasts. What's Included 🎨 2 × Side Fender Trims Left and right, glossy black finish ✓ Chrome Detail Accents Pre-installed, factory appearance 📋 Model Code LLK2293 – verified fitment ⚖️ Total Weight 200g – lightweight, no stress on body Product Highlights Precision-engineered for W213 and W205 platform fitment High-quality ABS material with exceptional durability Glossy black finish resists fading and UV damage Chrome detailing adds premium aesthetic depth Compatible with E63s AMG and base model variants Non-invasive installation – no drilling required Factory-finished appearance, OEM-style integration Lightweight design at 200g per set Enhanced side profile and aggressive styling 30-day money-back guarantee on all purchases Compatibility Model Generation Year Range Status Mercedes-Benz E-Class W213 2016–2023 Direct Fit Mercedes-Benz E63s AMG W213 2016–2023 Direct Fit Mercedes-Benz C-Class W205 2016–2023 Direct Fit Pre-2016 E-Class W212 –2015 Not Compatible Post-2023 E-Class W214 2024+ Not Compatible Note: Always verify your vehicle's model year and generation code before ordering. Check your registration document or contact us at +44 203 943 9919 if unsure. Installation Guide Difficulty: Moderate | Time: 30–45 Minutes per Side Clean the fender area thoroughly with soapy water and dry completely. Test-fit both trims on the vehicle to confirm alignment and body contours. Mark adhesive tape positions lightly with a marker for reference. Remove backing from 3M automotive-grade adhesive tape (pre-applied). Carefully align the trim to the fender edge and press firmly along the entire length. Apply additional pressure at corners and edges for 60 seconds to ensure grip. Allow 24 hours of curing time before exposure to moisture or car wash. Inspect all seams and edges for gaps; re-press if necessary. Important: Professional installation is highly recommended. Improper application may affect fitment. If uncertain, contact a certified Mercedes specialist or reach out to our team for installer recommendations in your region. Why Choose Victorious for Your Mercedes? We specialise in premium exterior and performance upgrades for luxury and adventure vehicles. Every product is tested for fitment accuracy, material longevity, and visual impact. We're trusted by thousands of enthusiasts worldwide—4.9/5 stars from over 12,300 verified reviews. Our 30-day money-back guarantee means you can buy with complete confidence. If these trims don't meet your expectations, we'll refund you in full, no questions asked. Ready to Upgrade Your Mercedes? Add these glossy black fender trims to your cart today and transform your E-Class or C-Class into the head-turner you know it can be. Shop Now Use code 22GET20 for 20% off when you buy any 2 items ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ 4.9★ Trusted 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, Daimler AG, or Jaguar Land Rover Limited. All references to vehicle models, generation codes, and trademarks are used for identification and compatibility purposes only. Product descriptions are based on manufacturer specifications and customer feedback. Always verify compatibility with your specific vehicle before purchase.

Victorious · BMW · Exterior Trim Gloss Black ABS Door Side Strips Cover Trim for BMW 5 Series G30 Premium ABS plastic door edge protection with aggressive styling for your 2017–2019 G30. G30 2017–2019 ABS Plastic Gloss Black Door Protection Easy Install Overview The G30 5 Series is built for refinement, but the door edges remain vulnerable to parking lot dings and daily wear. These Gloss Black ABS side strips deliver both protection and aggression—covering vulnerable door edges with sleek, modern bodywork detailing that complements the G30's proportional design language. Manufactured from ISO9001-certified ABS plastic, these trims are rigid enough to absorb minor impacts while flexible enough to accommodate the G30's body contours. The gloss black finish integrates seamlessly with factory trim or contrasts beautifully against metallic paint for added visual depth. Installation is straightforward, requiring no cutting, drilling, or permanent modification to your vehicle. Adhesive backing ensures a secure, long-lasting bond that won't creep or lift. What's Included 📦 Door Side Strips Set Complete front and rear trim pieces 📖 Installation Guide Step-by-step photo instructions ✦ Pre-Applied Adhesive Factory-grade backing tape Product Highlights ISO9001-certified ABS plastic for durability and UV resistance Gloss Black finish with hard-wearing surface coating Custom-fit design for BMW G30 2017–2019 models Prevents door edge dings, scuffs, and paint damage Pre-applied industrial adhesive backing for secure bond No drilling, cutting, or modification required Lightweight construction at 1.4kg total weight Maintains factory appearance when properly installed Professional-grade finish for showroom quality Compatible with all G30 trim levels and paint finishes Compatibility Model Years Compatibility BMW 5 Series G30 2017–2019 Direct Fit BMW 5 Series G30 (2020+) 2020–Present Not Compatible BMW 5 Series F10 2010–2017 Not Compatible BMW M5 G30 2017–2019 Direct Fit Tip: Confirm your model year and body style before ordering. G30 sedans and Gran Tourismo variants use identical door strips. Installation Difficulty: Beginner | Time: 20–30 mins per side Prepare the surface: Thoroughly clean all door edges with isopropyl alcohol. Dry completely and allow 15 minutes for any residual moisture to evaporate. Dry-fit the trim: Remove backing tape from one strip and position along the door edge. Ensure alignment and proper fit before final adhesion. Apply the trim: Peel away backing tape fully. Press the strip firmly onto the door edge, working from top to bottom to eliminate air bubbles. Set the adhesive: Allow 24 hours before exposing the trim to moisture or high heat. Repeat for all edges: Follow the same process for remaining door edges and trim locations. Warning: Do not wash your vehicle for 48 hours after installation. Adhesive requires full cure time for maximum durability. Ready to Protect Your G30? These ABS door trims combine genuine protection with understated aggression. Add them to your cart today and complete your G30's exterior detailing. Add to Cart Use code 22GET20 for 20% off when you add any 2 items. 4.9/5 · 12,300+ reviews ✦ 30-day money-back guarantee ✦ Worldwide shipping via DHL ✦ +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessories manufacturer and retailer. We are not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke AG, or any official BMW dealer. All product names, logos, and vehicle designations are used for identification and compatibility purposes only.

BMW · X3 X4 5 6 7 Series · Interior Trim Carbon Fiber Style ABS Gear Shift Head Trim – BMW G01 G02 G11 G12 G30 Premium carbon fiber aesthetic upgrade for your BMW interior—sleek, durable, and tool-free installation. BMW X3 G01 BMW X4 G02 5 Series G30 6 Series G12 7 Series G11 2018–2019 ABS Material Adhesive Install Overview BMW owners understand that interior detailing separates a good cabin from an exceptional one. The Carbon Fiber Style ABS Gear Shift Head Trim is engineered to elevate the visual impact of your gear selector housing, bringing a modern, tech-forward aesthetic to your X3, X4, or 5, 6, 7 Series. Crafted from premium ABS plastic with an authentic carbon fiber weave finish, this trim piece replaces the factory gear shift surround with a contemporary accent that catches light and draws the eye to one of the most-touched zones in your cockpit. The material resists fingerprints and daily wear, maintaining its appearance season after season. Installation takes minutes—no drilling, no permanent modifications. Pre-applied automotive-grade adhesive tape means you can achieve a factory-fresh fit in your own garage. Perfect for owners who want OEM-quality upgrades without the complexity. What's Included 🎨 Carbon Fiber Trim Piece Pre-finished, ready to install ✓ Adhesive Tape Applied No additional materials needed 📋 Installation Guide Step-by-step photo reference Product Highlights Authentic carbon fiber weave texture and appearance Lightweight ABS construction for zero impact on vehicle dynamics Pre-applied 3M automotive adhesive—no tools or chemicals required Precision-molded to OEM gear shift surround dimensions Superior finish resists fingerprints and UV fading One-piece design for seamless integration Removable without surface damage or residue Complements factory BMW interior trim schemes Fits all interior ambient lighting systems 30-day money-back guarantee on fitment satisfaction Compatibility Chart BMW Model Generation Year Range Fitment X3 G01 2018–2019 Direct Fit X4 G02 2018–2019 Direct Fit 5 Series G30 2018–2019 Direct Fit 6 Series G12 2018–2019 Direct Fit 7 Series G11 2018–2019 Direct Fit Other BMW Models All Any Not Compatible Important: Verify your vehicle's model code and year before purchase. Measure your existing gear shift surround to confirm fitment. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure. Installation Guide Tool-Free Adhesive Installation Difficulty: Beginner | Time: 5–10 minutes Power off your vehicle and allow the interior to reach room temperature. Clean the existing gear shift surround with rubbing alcohol and a microfiber cloth. Let dry completely (2–3 minutes). Carefully peel back the adhesive tape backing on the trim piece—expose only 25% initially. Align the trim with the top center of the gear shift housing and press firmly for 10 seconds. Gradually peel away the remaining backing and press the sides down with steady, even pressure. Allow 24 hours for the adhesive to cure before using the gear shift mechanism. If repositioning is needed within the first 5 minutes, gently lift and realign—do not stretch the adhesive. Note: Do not expose the trim to extreme heat (above 55°C) for 48 hours after installation. Ensure no moisture or debris is present on the mounting surface—poor surface prep is the leading cause of adhesive failure. Technical Specifications Specification Detail Material Premium ABS Plastic Finish Carbon Fiber Weave (UV-resistant) Weight 100g Dimensions (L × W × H) 200mm × 100mm × 50mm Installation Method 3M Automotive Adhesive Tape (Pre-applied) Removal Clean peel-off (no residue if done within 24 months) Operating Temperature Range –20°C to +55°C Ready to Upgrade Your BMW? Transform your gear selector into a statement piece of modern interior design. This carbon fiber trim brings factory-quality aesthetics to your BMW's cabin—no dealer visit required. Add to Cart Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars – 12,300+ Reviews 🌍 Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ 30-Day Guarantee – Full Refund 📞 Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with BMW AG, Bayerische Motoren Werke, or Jaguar Land Rover plc. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. This product is designed for fitment only and does not modify vehicle performance, emissions, or safety systems. Installation is at the user's own risk. Always consult your vehicle's owner's manual and confirm compatibility before installation.