Automotive

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Elevate the rear cabin of your Velar with a precision-cut matte silver TPU trim cover that delivers the SVR aesthetic in minutes — no tools, no fuss. Range Rover Velar 2017–2020 Matte Silver TPU Material Clip-On Fit SVR Look Rear Climate Control Interior Upgrade No Drilling Overview The Range Rover Velar arrived as one of Land Rover's most design-forward models — a cabin defined by clean lines, flush surfaces, and minimalist touches that set it apart from anything else in the segment. But even a vehicle this considered leaves room for the kind of detail that separates a standard specification from something truly special. The rear climate control panel is one of those areas: functional, often overlooked, and entirely worthy of an upgrade. This matte silver rear air conditioning trim is engineered specifically for the Range Rover Velar produced between 2017 and 2020. Precision laser-cut from high-quality TPU (thermoplastic polyurethane), it clips directly over the existing rear climate cover with no adhesives, no cutting, and no permanent modification. The result is a clean, factory-quality finish that immediately draws the eye — exactly the kind of detail you'd find on the flagship SVR models. Forming part of the wider Victorious interior package for the Velar, this trim works beautifully in isolation or as part of a cohesive cabin refresh. Whether you're building out a full interior upgrade or simply refining one detail at a time, this is the kind of piece that quietly elevates the entire space. What's Included 🪟 Rear A/C Trim Cover 1× matte silver TPU clip-on panel 📄 Fitting Guide Step-by-step installation instructions 📦 Protective Packaging Secured for safe international delivery Product Highlights Precision laser-cut for exact fitment on the Velar rear climate panel High-quality TPU construction — flexible, durable, scratch-resistant Matte silver finish replicates the SVR interior aesthetic Clips directly over the existing cover — zero permanent modification No tools, adhesives, or professional installation required Part of the full Victorious Velar interior upgrade package Consistent colour tone across matte silver interior trim collections Maintains full functionality of rear climate controls post-fit Lightweight and precisely formed — no panel gap or flex Reversible install — original cover restored in seconds if needed Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar 2021–2023 All Trims (facelift) Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 2012–2019 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Ensure the rear cabin area is clean and free of dust or moisture before beginning installation. Remove the matte silver trim piece from its protective packaging and orient it correctly against the existing rear climate control panel. Starting from one edge, gently align the trim clip along the outer perimeter of the existing cover, ensuring the cutouts line up with the air vents and control slots. Apply even, gentle pressure across the surface until all clips engage with an audible click — confirming a secure, flush fit. Run a finger lightly around all edges to confirm there are no gaps or lifted sections. Test rear climate controls to verify full function is retained. Note: This trim is designed for the pre-facelift Range Rover Velar (2017–2020 only). Panel dimensions differ on 2021+ models. If you're unsure of your build year, check your VIN plate or contact us before ordering. Complete the Look This rear A/C trim is one part of a full Victorious interior upgrade package for the Range Rover Velar. Explore matching silver trim pieces for the dashboard, door panels, and centre console to achieve a cohesive, factory-grade SVR-inspired finish throughout the cabin. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Upgrade your climate control panel with genuine carbon fibre styling—the SVR look, simplified installation, and premium finish. Velar 2017–2020 Carbon Fibre Climate Control SVR Look Interior Package Overview Your Range Rover Velar deserves an interior that reflects its premium character. This carbon fibre rear air conditioning trim is engineered to elevate the climate control area—a detail that transforms the entire dashboard aesthetic. Built from high-quality carbon TPU with precision laser-cut edges, it delivers the aggressive, purposeful look of SVR models without modification or permanent alteration. Installation takes minutes. The trim simply clips over your existing climate cover, requiring no drilling, adhesives, or professional fitment. Perfect laser alignment ensures a factory-tight finish that integrates seamlessly with your dashboard geometry. Whether you're building a carbon interior package or adding statement detail, this piece combines visual impact with authentic material quality—a hallmark of Victorious Automotive builds. What's Included 🎨 Carbon Fibre Trim Rear A/C panel, precision-cut ✓ Clip-On Fitting No adhesive or drilling needed 📖 Fitting Guide Step-by-step instructions 🛡 30-Day Guarantee Money-back assurance Product Highlights Premium Carbon Fibre TPU Material Laser-Cut for Perfect Fit Clip-Over Installation (No Tools Required) SVR Model Aesthetic Factory-Aligned Edges Non-Permanent Fitment Compatible with 2017–2020 Velar Part of Carbon Interior Packages Durable Protective Coating Worldwide Shipping Available Compatibility Vehicle Year Range Compatibility Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Other Range Rover Models All Years Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Turn off your vehicle and allow the climate control system to cool. Gently locate the existing rear air conditioning trim panel in your climate control area. Position the carbon fibre trim against the original panel, aligning the clip points. Press firmly and evenly until all clips engage and the trim sits flush. Verify that all edges align with adjacent trim panels and dashboard surfaces. Step back and enjoy your new SVR-inspired interior detail. Important: Do not force clips. If resistance is felt, realign the trim and try again. Forcing may damage the clip points. Ready to Elevate Your Velar? This carbon fibre rear air conditioning trim is the detail that transforms a dashboard. Premium material, flawless fit, and the SVR look—all without complexity. Add it to your build today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping — DHL, FedEx, UPS ✓ Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and designs are the property of their respective manufacturers. Product compatibility is based on original equipment specifications; fitment may vary based on vehicle condition and previous modifications.

Victorious Automotive · Range Rover Velar · Interior Styling Pillar Vent Matte Silver Covers for Range Rover Velar 2017–2020 A precision-fitted, tool-free upgrade that transforms the Velar's cabin vent surrounds from understated to genuinely refined — in under two minutes. Range Rover Velar 2017–2020 High-Grade ABS Matte Silver Direct Fit Adhesive Install 2-Piece Set Interior Trim Overview The Range Rover Velar sits at a fascinating intersection — a vehicle designed to be genuinely beautiful, with a cabin that rivals the best of European luxury. Land Rover invested heavily in the Velar's interior architecture, with flush surfaces, minimal controls, and a sense of deliberate restraint. Yet for all its considered design, the standard pillar vent surrounds remain a notably plain detail — an area where the factory finish simply doesn't match the ambition of the rest of the cabin. These Matte Silver Pillar Vent Covers are designed to address exactly that. Produced from high-quality ABS with a consistent matte silver finish, each piece is precision-moulded to sit flush against the Velar's existing vent architecture. The result is a subtle but immediately visible improvement — a finish that reads as more premium, more intentional, and far more cohesive with the Velar's wider interior language. What makes this upgrade genuinely compelling is the combination of visual payoff and minimal commitment. There's no drilling, no cutting, no risk to your interior trim. Pre-applied 3M-grade adhesive tape means the covers bond firmly to the original surface with steady hand pressure — permanently transforming the look of your cabin without any permanent modification. What's Included 🔲 Matte Silver Vent Covers 2-piece set, pre-fitted with adhesive backing 🩹 Pre-Applied Adhesive Tape 3M-grade, factory-applied to each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights High-grade ABS construction for lasting durability Consistent matte silver finish, uniform across both pieces Precision-moulded for exact fitment on Velar pillar vents Pre-applied adhesive — no tools or hardware required Installation time under 2 minutes from unboxing 2-piece set covering both pillar vent positions No drilling, cutting, or irreversible modification Compatible with all trim levels of the 2017–2020 Velar Colour-consistent with popular Velar interior silver accents Elevates the factory interior without altering OEM components Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S Direct Fit Range Rover Velar 2017–2020 SE Direct Fit Range Rover Velar 2017–2020 HSE Direct Fit Range Rover Velar 2017–2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017–2020 First Edition Direct Fit Range Rover Velar 2021 onwards All Not Confirmed Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 / L551 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Before fitting, clean the existing vent surround surface thoroughly with an isopropyl alcohol wipe to remove any dust, grease, or residue. Allow to dry completely. Remove the protective film from the pre-applied adhesive tape on the reverse of each vent cover. Align the first cover carefully over the pillar vent — take a moment to confirm positioning before making contact with the surface. Once aligned, press firmly and evenly across the entire cover for 20–30 seconds to ensure a strong initial bond. Repeat for the second piece on the opposing vent position. Allow 24 hours for the adhesive to fully cure before exposing to direct sunlight or extreme temperatures. Note: Ensure the application surface is completely clean and dry before fitting. Attempting to install over dust, wax, or moisture will significantly reduce adhesive performance. Do not attempt to reposition covers once the adhesive has made contact with the surface. Complete Your Velar's Interior Browse our full Range Rover Velar collection for more precision-fit interior and exterior upgrades, hand-picked by our specialist team for owners who hold their vehicles to a higher standard. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Range Rover Velar / Evoque · Interior Trim Aluminum Alloy Air Conditioning & Volume Knob Ring Trim — Range Rover Velar & Evoque 2017–2020 Precision-machined aluminum alloy trim rings that upgrade your climate and volume controls with a tactile, premium finish worthy of the cabin they inhabit. Range Rover Velar 2017–2019 Range Rover Evoque 2019–2020 Aluminum Alloy 3-Piece Set No-Tool Fit Blue · Red · Silver Interior Trim AC & Volume Controls Overview The Range Rover Velar and second-generation Evoque are among the most design-forward vehicles Land Rover has ever produced. Every surface in the cabin is considered — and the rotary controls for climate and audio are no exception. As daily-use touch points, they deserve the same level of finish as the rest of the interior architecture. These aluminum alloy knob ring trim pieces are precision-formed to sit flush over the existing air conditioning and volume control dials, adding a machined, anodised layer of quality that the factory finish simply doesn't deliver. Available in three colourways — Blue, Red, and Silver — they allow you to personalise the feel of your cockpit without modifying anything permanently. Designed specifically around the factory knob profiles of the Velar (2017–2019) and Evoque (2019–2020), each ring fits cleanly and securely with no adhesive required. The result is an immediate visual and tactile upgrade that takes under a minute to achieve — and is entirely reversible. What's Included 🔘 AC Knob Ring × 2 Fits left and right climate control dials 🎚️ Volume Knob Ring × 1 Fits central audio/volume rotary control 📦 Full 3-Piece Set All three rings included per order Product Highlights Precision-machined aluminum alloy construction Available in Blue, Red, and Silver anodised finishes Designed to fit factory knob profiles exactly No tools, adhesive, or modification required Direct press-fit installation in under 60 seconds Covers all three main rotary controls (3-piece set) Fully reversible — remove without damage any time Adds premium tactile and visual quality to the cockpit Lightweight construction — adds no perceptible weight Purpose-built for Velar 2017–2019 and Evoque 2019–2020 Compatibility Vehicle Year Range Fit Notes Range Rover Velar 2017 · 2018 · 2019 Direct Fit All trim levels Range Rover Evoque (L551) 2019 · 2020 Direct Fit 2nd Gen Evoque (L551) Range Rover Evoque (L538) 2011–2018 Not Compatible Different knob profile — 1st Gen Range Rover Velar (2020+) 2020–present Verify Before Purchase Minor interior updates may affect fit Range Rover Sport L494 2013–2020 Not Compatible Different rotary control design Defender L663 2020–present Not Compatible Different climate control layout Installation Notes ⏱ Estimated Time: Under 5 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure the vehicle is off and the interior is clean and dry around the control area. Select your preferred colourway (Blue, Red, or Silver) before beginning. Align the first aluminum ring over the corresponding factory knob — match the centre bore carefully. Apply gentle, even downward pressure until the ring seats flush against the dial surround. Repeat for the remaining two rings — volume control and second AC dial. Check each ring is fully seated and turns freely with the knob beneath it. No adhesive is required or recommended. ⚠ Please Note: These rings are designed as press-fit overlays. Do not force or apply excessive pressure. If resistance is felt, check alignment before proceeding. Verify your exact model year before ordering — interior specifications can vary between production runs within the same year. Elevate Every Touch Point The controls you reach for most deserve the same standard as the rest of your Range Rover's interior. Upgrade your Velar or Evoque with confidence — backed by our 30-day money-back guarantee and 4.9-star rated service. Shop Range Rover Velar Accessories Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Head Pillow Adjustment Decoration Button Trim for Range Rover Velar 2017–2022 ABS chrome button trim that elevates the headrest adjustment controls on your Range Rover Velar — a small detail that makes an immediate visual difference inside the cabin. Range Rover Velar 2017–2022 ABS Chrome Interior Moulding 5 Colour Options 3M Adhesive Fit ISO9001 Certified LLK780 Overview The Range Rover Velar was designed from the outset to blur the line between sculpture and vehicle — its interior is one of the most refined in the SUV class. For owners who take that philosophy seriously, every surface matters, including the small but frequently touched headrest adjustment buttons. Left in their standard form, these controls can look surprisingly plain against the Velar's otherwise considered cabin design. This ABS chrome decoration trim for the head pillow adjustment buttons addresses exactly that. Precision-formed to sit flush over the factory controls, it introduces a polished or colour-matched accent at one of the most visible points in the rear seat area. Available in five finishes — Silver, Gold, Red, Black, and Blue — there's an option to complement either a factory interior palette or a more personalised build. Certified to ISO9001 manufacturing standards and backed by the metyoucar LLK780 model specification, this trim is built to the kind of tolerances that won't look out of place in a premium British SUV. If you're refining the Velar's interior one considered piece at a time, this is exactly the level of detail worth attending to. What's Included 🪄 Chrome Button Trim Set ABS chrome headrest adjustment button covers 🔲 3M Adhesive Backing Pre-applied for clean, tool-free installation 📋 Installation Guide Basic fitting reference included Product Highlights Precision-moulded ABS chrome construction for a factory-quality finish Available in 5 finishes: Silver, Gold, Red, Black, and Blue Pre-applied 3M adhesive — no drilling, no tools required Designed specifically for the Range Rover Velar headrest adjustment buttons ISO9001 certified manufacturing for consistent quality control Lightweight at just 12g — no impact on headrest function or movement Direct fit over OEM controls with no modification needed Chrome finish resists fingerprints and light surface wear Subtle upgrade with a high visual impact in the cabin Colour options suit both standard and custom interior specifications Compatibility Vehicle Year Range Fitment Range Rover Velar 2017–2022 Direct Fit Land Rover Discovery Sport 2015–2017 Direct Fit Range Rover Sport L494 2013–2020 Verify Before Ordering Range Rover Vogue L405 2013–2020 Verify Before Ordering Land Rover Discovery 5 2017–2022 Verify Before Ordering Range Rover Velar (2023+) 2023–Present Not Compatible If your vehicle is not listed or you're unsure, please contact us at +44 203 943 9919 before ordering. Our team is available Monday to Friday, 9am–7pm. Installation Notes Difficulty: Very Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Clean the headrest adjustment button surface thoroughly using an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond. Identify the correct trim piece for each button position (refer to any included guide or test-fit without removing the adhesive backing first). Peel back the 3M adhesive protective layer from the rear of the trim piece. Align the trim carefully over the headrest button and press firmly into position for 20–30 seconds to activate the adhesive bond. Allow 24 hours before applying any significant pressure or cleaning around the fitted area to ensure full cure. ⚠ Note: Do not install on damp, greasy, or cold surfaces. In cooler climates, allow the trim and adhesive to reach room temperature before fitting. Attempting to reposition after initial adhesion may reduce bond strength. Browse More for Your Vehicle 🚙 Range Rover Velar Shop the full Velar collection → 🚙 Discovery Sport Shop Discovery Sport accessories → 🚙 Land Rover Discovery 5 Shop Discovery 5 accessories → Elevate Every Detail Thousands of Range Rover and Land Rover owners trust Victorious Automotive to help them finish their vehicles to the standard these machines deserve. Rated 4.9/5 from over 12,300 verified reviews. Shop All Velar Accessories Use code 22GET20 — save 20% when you buy any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Evoque · Interior Trim Matte Silver ABS Rear Row Cup Holder Cover Trim — Range Rover Evoque 2019–2020 A precision-fit interior trim piece that brings a refined matte silver accent to your Evoque's rear cup holder surround — installed in minutes, no tools required. Evoque L551 2019–2020 ABS Plastic Matte Silver Rear Interior Cup Holder Trim 3M Tape Install ISO 9001 Certified Overview The Range Rover Evoque has always punched above its weight in terms of interior refinement — it's a compact SUV that genuinely feels premium. For 2019 and 2020 model year Evoque owners, the rear cabin experience is just as important as the front, and the smallest details contribute to that sense of quality. The rear cup holder surround, while functional, can look understated compared to the rest of the cabin's character. This matte silver ABS cup holder cover trim from metyoucar is designed specifically to overlay the rear row cup holder bezel on the Range Rover Evoque (2019–2020), as well as the Range Rover Velar (2017–2019). Crafted from high-grade ABS plastic with a satin matte silver finish, it integrates seamlessly with the surrounding trim to create a cohesive, factory-adjacent aesthetic — without the factory price tag. The piece weighs just 29 grams and attaches cleanly via pre-applied 3M adhesive tape on the reverse face. There's no drilling, no permanent modification, and no specialist tools needed. It's the kind of subtle upgrade that you'll notice every time you get in, and that rear passengers will appreciate just as much as you do. What's Included 🪄 Rear Cup Holder Cover Trim ×1 — Matte silver ABS overlay piece, pre-fitted with 3M adhesive 🔲 3M Adhesive Backing Pre-applied to reverse face for clean, residue-free bonding 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-engineered fit for Evoque 2019–2020 rear cup holder surround Also compatible with Range Rover Velar 2017–2019 High-quality ABS plastic construction — durable and lightweight at just 29g Matte silver finish complements Evoque's interior colour palette 3M adhesive backing provides strong, long-lasting bond without drilling Tool-free installation — completed in under 5 minutes ISO 9001 certified manufacturing process for consistent quality No permanent modification to your vehicle's trim or panels Reversible — can be removed cleanly if required Ideal for refreshing worn or scratched original cup holder surrounds Compatibility Vehicle Model Code Year Range Fitment Range Rover Evoque L551 2019 – 2020 Direct Fit Range Rover Velar L560 2017 – 2019 Direct Fit Range Rover Evoque L538 (Mk1) 2011 – 2018 Not Compatible Range Rover Evoque L551 2021 onwards Verify Before Purchase Range Rover Sport L494 2013 – 2022 Not Compatible Land Rover Discovery Sport L550 2015 – 2022 Not Compatible If your model year falls outside the listed range or you're unsure of your vehicle's trim variant, please contact us before ordering — we're happy to confirm fitment. Installation Notes ⏱ Estimated Time: 5 minutes  |  🔧 Difficulty: Beginner  |  🛠 Tools Required: None Ensure the existing rear cup holder surround is clean, dry, and free from dust or grease. Use an alcohol wipe or IPA solution for best adhesion. Test-fit the trim piece over the cup holder surround without removing the 3M backing to confirm alignment and orientation. Once satisfied with positioning, peel the protective film from the 3M adhesive backing on the reverse of the trim piece. Carefully align the trim piece over the cup holder surround and press firmly into place, applying consistent pressure across the full surface for 30–60 seconds. Allow 24 hours for the adhesive to fully cure before subjecting the trim to heavy use or cleaning. ⚠ Note: Avoid fitting in cold temperatures below 10°C as this may reduce initial adhesive effectiveness. Do not use silicone-based cleaners on or near the trim as these can compromise the bond over time. Elevate Your Evoque's Rear Cabin Small details define the premium experience. Browse the full Range Rover Evoque interior accessories collection at Victorious Automotive and build a cabin that reflects how much you care about your vehicle. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Wireless Charging Wireless Car Charger Panel for Range Rover Velar 2017–2019 A factory-style Qi wireless charging panel engineered specifically for the Range Rover Velar, delivering up to 10W fast charging with zero cables and a completely clean finish. Range Rover Velar 2017–2019 Qi Wireless QC 3.0 10W Fast Charge Direct Fit Hidden Wiring Anti-Slip Rubber 3-Coil Design Overview The Range Rover Velar was designed from the outset as a vehicle where form and function exist in complete harmony. Its minimalist interior — stripped of unnecessary clutter and defined by clean horizontal lines — deserves accessories that respect that philosophy. This wireless charging panel was developed with exactly that in mind: a direct-fit replacement tray that slots precisely into the Velar's centre console, as if it were always there. Built to the QC 3.0 standard and equipped with a three-coil Qi layout, this charger eliminates the frustration of charging blind spots. Whether you set your phone down squarely or slightly off-centre, charging initiates immediately. Output flexes automatically between 10W, 7.5W, and 5W depending on your device, ensuring iPhones, Samsung Galaxy handsets, and a wide range of other Qi-enabled smartphones receive the fastest charge their hardware supports. Beneath the surface, a built-in anti-magnetic cooling sheet protects both the charger and your device during extended use, while the anti-slip rubber mat keeps your phone seated firmly even on unmade roads or sharp bends. A subtle colour signal light confirms charging status at a glance — discreet enough to suit the Velar's cabin, but clear enough to be useful. All wiring routes cleanly behind the panel, leaving absolutely no loose cables in sight. What's Included 🔌 Wireless Charging Panel Direct-fit tray for Range Rover Velar 2017–2019 🔧 Wiring Harness Connects to OEM cigarette lighter or USB port 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Anti-Magnetic Sheet Built-in cooling and magnetic interference protection Product Highlights Precision-moulded direct-fit design for Range Rover Velar 2017, 2018 & 2019 Three-coil Qi layout eliminates charging blind spots across the entire pad surface Supports up to 10W fast charging for Samsung, 7.5W for Apple, and 5W universal QC 3.0 standard — intelligent power delivery matched to your device Built-in anti-magnetic cooling sheet for safe, stable long-duration charging Advanced anti-slip rubber mat keeps your device secure at all times Discrete colour signal light confirms charging status without distraction Full hidden wiring — no exposed cables, no compromised centre console aesthetics Original-style OEM appearance — blends seamlessly with Velar interior design Wide operating temperature range: −30°C to +80°C — suitable for all climates Technical Specifications Parameter Specification Process Standard Vehicle / Automotive Grade Input Voltage 9V – 16V DC Power Output 10W / 7.5W / 5W (auto-adaptive) Charging Frequency 110 kHz – 205 kHz Charging Efficiency >70% Operating Temperature −30°C to +80°C Wireless Standard Qi (3-Coil) Quick Charge Standard QC 3.0 Device Compatibility Brand Compatible Models Status Apple iPhone iPhone 8, 8 Plus, X, XS, XS Max, XR Direct Fit Samsung Galaxy S6, S6 Edge, S6 Edge+, S7, S7 Edge, S8, S8+, S9, S9+, S10, S10+, S10e, Note 5, Note 8, Note 9 Direct Fit Google Pixel / Nexus Nexus 4, 5, 6, 7 / Pixel 3, Pixel 3 XL Direct Fit LG G2, G3, G6, G6+, V30, V30s ThinQ Direct Fit Nokia Lumia 820, 830, 920, 925, 928, 929, 930, 1020, 1520 / Nokia 7 Plus, 8 Sirocco Direct Fit Motorola Moto 360, Moto X Pro, Moto Mini, Droid 5 Direct Fit Apple AirPods All generations Not Supported Non-Qi Devices Phones without native wireless charging Requires Receiver Phones without built-in Qi wireless charging can be supported with the addition of a separately purchased wireless receiver adapter. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Ensure your Range Rover Velar is switched off before beginning. Confirm your vehicle is a 2017, 2018 or 2019 model year to verify direct fitment. For straightforward installations, locate the OEM cigarette lighter or USB port beneath the centre console and connect the wiring harness directly — no panel removal required. For a fully concealed hidden-wire installation, carefully remove the centre control tray panel using appropriate trim removal tools to avoid scratching surrounding surfaces. Route the wiring harness to the rear of the cigarette lighter socket and establish a secure connection. Tuck all excess cabling neatly into the cavity. Press the new wireless charging panel firmly into position. The precision-moulded housing should seat flush with the surrounding trim with no gaps or movement. Restore power to the vehicle, place a compatible device on the pad, and confirm the charging signal light illuminates. ⚠ Note: Steps requiring removal of the centre control panel are best carried out by a professional automotive technician to avoid damage to surrounding trim or wiring. Metal objects such as coins, IC cards, or bank cards placed between your phone and the charging surface will interrupt charging. Phone cases up to 4mm thick are generally compatible; thicker cases may reduce charging speed. Explore More Velar Accessories This wireless charging panel is just one of many precision upgrades available for the Range Rover Velar. Browse the full Velar collection at Victorious Automotive to find interior enhancements, protection accessories, and styling upgrades designed specifically for your vehicle. Shop All Range Rover Velar Accessories → Upgrade Your Velar. Zero Compromise. Victorious Automotive supplies premium accessories to Range Rover owners across the world. Every product is selected for quality, fitment accuracy, and respect for your vehicle's original design intent. Shop Range Rover Velar Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and vehicle model references are used for fitment identification purposes only. Vehicle trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Exterior Protection Headlamp Tint Pre-Cut Film – Range Rover Velar 2018–2020 Precision pre-cut TPU headlamp tint film engineered to protect and transform the front lighting signature of your Range Rover Velar — available in Blackened Smoke or Crystal Clear. Range Rover Velar 2018–2020 Top TPU Material Self-Healing Scratch Resistant Blackened & Clear Pre-Cut Fit 2-Piece Kit Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — its flush LED headlamps and sleek frontal architecture are central to its visual identity. Keeping those headlamp lenses in pristine condition against stone chips, road debris, UV degradation and daily wear is something every Velar owner should prioritise from day one. This pre-cut headlamp tint film is manufactured from premium Top TPU — the same grade of thermoplastic polyurethane used in professional paint protection applications. Unlike adhesive vinyl films, TPU is optically clear at a molecular level, meaning light output is never compromised. The self-healing surface actively closes minor swirl marks and surface abrasions when exposed to heat, keeping the film looking factory-fresh for years. Available in two finishes — Blackened Smoke for a blacked-out, stealth aesthetic that complements the Velar's already dramatic lines, and Crystal Clear for invisible protection that maintains the OEM look — both options are precision pre-cut to the exact headlamp contours of the 2018–2020 Range Rover Velar, ensuring a seamless, bubble-free install with no trimming required. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels for the Velar headlamps 🛠️ Application Tool Kit Included as a gift to assist with installation 📋 Installation Guide Step-by-step instructions for a clean finish 🎨 Choice of Finish Blackened Smoke or Crystal Clear — select at checkout Product Highlights Precision pre-cut for the Range Rover Velar 2018–2020 — no trimming needed Top-grade TPU material — flexible, durable and optically superior Self-healing surface technology — minor scratches disappear with heat Scratch and abrasion resistant — protects against stone chips and road debris UV-stabilised formula — prevents lens yellowing and hazing over time Available in Blackened Smoke for a stealth look or Crystal Clear for OEM finish Maintains full headlamp light output — zero optical interference Bubble-free adhesive backing — clean, professional finish every time Residue-free removal — will not damage or stain OEM headlamp lenses Includes application tools — everything you need in one package Vehicle Compatibility Vehicle Year Range Fitment Range Rover Velar 2018–2020 Direct Fit Range Rover Velar 2017 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–Present Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2018–Present Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L461 2022–Present Verify Before Purchase Range Rover Vogue L460 2022–Present Verify Before Purchase Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Tools Required Thoroughly clean the headlamp lens surface with an isopropyl alcohol solution and allow to dry completely — any dust or grease will affect adhesion. Work in a warm, dust-free environment. A garage or sheltered area at 15–25°C is ideal. Warmer conditions improve film flexibility and conformity. Lightly mist the headlamp surface with a water and soap solution (wet application method) to allow repositioning during placement. Carefully peel the backing from the pre-cut TPU film, keeping the adhesive side away from surfaces. Align the film to the headlamp contour before committing. Apply the film from the centre outward using the included squeegee tool, working any air bubbles towards the edges progressively. Use a heat gun or hairdryer on a low setting to gently warm the film around curves and edges — this improves adhesion and conformity to complex shapes. Allow 24–48 hours for the adhesive to fully cure before washing the vehicle or exposing the film to heavy rain. ⚠ Note: Ensure the headlamp surface is completely free of wax, polish or ceramic coating residue before application. Residual coatings will significantly reduce adhesive bond strength and may cause lifting at the edges. If your lenses have been previously coated, lightly decontaminate with a clay bar or isopropyl wipe before fitting. Complete Your Velar Build Explore the full Victorious range of Range Rover Velar accessories — from interior refinements to exterior protection — curated exclusively for owners who refuse to compromise. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Range Rover Velar · Exterior Styling Silver & Black Hood Vent Slats for Range Rover Velar 2017–2019 Transform your Velar's bonnet with precision-finished two-tone vent slat trims that deliver the Dynamic Edition look — no drilling, no fuss, no compromise. Range Rover Velar 2017–2019 Silver & Black Bonnet Vent Trims Peel & Stick Exterior Styling High-Grade ABS No Drilling Required Overview The Range Rover Velar arrived with one of the most architecturally considered silhouettes in the modern SUV era — flush surfaces, flush door handles, and a bonnet line that draws the eye from front to rear. The hood vent apertures are a defining detail of that design, and yet in standard trim, they remain understated. These Silver and Black Hood Vent Slat Trims are designed specifically for Velar owners who want to unlock the full visual intent of that feature. Finished in a polished silver and gloss black two-tone combination, these vent slat inserts slot cleanly into the existing bonnet vent cutouts and replicate the appearance of the Velar's premium Dynamic specification. The contrast between the silver slats and black surround picks out the geometry of the vent with precision, adding visual depth and a purposeful, performance-orientated character without altering the vehicle's original lines. Manufactured from high-grade ABS polymer with a mirror-quality surface finish, these trims are built to resist UV fading, temperature cycling, and the general rigours of daily driving. Installation requires no tools, no adhesive mixing, and no professional fitting — just a clean surface, a few minutes, and the confidence that the result will look factory-correct from day one. What's Included 🔲 Hood Vent Slat Trims (x2) Left and right silver & black inserts for both bonnet vents 📎 Pre-Applied 3M Adhesive Tape High-bond automotive-grade backing, factory-applied to each trim 🧹 Surface Prep Wipe Alcohol cleaning wipe to ensure a clean bond prior to fitting 📄 Fitting Instructions Step-by-step guide included in the box Product Highlights Designed specifically for the Range Rover Velar 2017–2019 bonnet vent apertures Two-tone silver and gloss black finish for a Dynamic Edition aesthetic High-grade ABS construction — resistant to UV, heat, and road vibration Pre-applied 3M automotive adhesive — no separate bonding agents required Tool-free installation completable in under 15 minutes Precision-cut for flush, factory-correct fitment — no gaps or proud edges Does not interfere with bonnet vent function or airflow Non-permanent — fully removable without damage to paintwork Available in three colourways: Silver/Black, Rose Gold, and Full Black Supplied as a complete pair — fits both left and right vents simultaneously Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar (L560) 2017 – 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020 – 2022 All trims Verify Before Purchase Range Rover Evoque (L551) 2019 – 2024 All trims Not Compatible Range Rover Sport (L494) 2013 – 2022 All trims Not Compatible Range Rover Vogue (L405) 2013 – 2021 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and allow the bonnet to cool fully to ambient temperature before beginning installation. Use the included alcohol prep wipe to thoroughly clean the surface of each bonnet vent aperture. Remove all wax, polish residue, and road film. Allow to dry completely — approximately 60 seconds. Test-fit each vent slat trim against its corresponding aperture without removing the adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first trim. Position carefully within the vent aperture, starting from the centre and working outward. Apply firm, even pressure across the full length of the trim for a minimum of 30 seconds to activate the adhesive bond. Repeat for the second vent slat trim on the opposite side. Allow 24 hours before washing the vehicle or exposing the bonnet to heavy rain, to allow the adhesive to reach full cure strength. ⚠ Note: Do not attempt installation in direct sunlight or when ambient temperature is below 10°C, as this will reduce adhesive performance. For best results, install indoors or in a shaded area with a surface temperature between 15°C and 35°C. Complete the Look on Your Velar Explore the full Victorious range of exterior styling accessories for the Range Rover Velar — from mirror caps and grille surrounds to side vents and door trims. Everything you need to finish the build, in one place. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. All rights remain with their respective owners.

Victorious · Range Rover Velar · Exterior Styling Carbon Fiber Door Handle Covers – Range Rover Velar 2017–2018 Upgrade to SVR-inspired carbon fiber door handles in minutes—laser-cut precision, premium TPU, perfect fit every time. L560 Velar 2017–2018 Carbon Fiber 4-Piece Set Clip-On Install Overview Your Range Rover Velar deserves to look as premium as it drives. These carbon fiber door handle covers transform the exterior in seconds, delivering the aggressive, modern aesthetic of the top-tier SVR models without the price tag. Perfect for owners who want individual styling that commands attention on the road. Each set comprises four precision-laser-cut covers engineered to clip seamlessly over your factory handles. We've engineered them from high-quality carbon fiber TPU—a material that balances authentic visual impact with durability and longevity. The adhesion is exceptional; once fitted, they stay exactly where they belong. Installation takes minutes. No drilling, no permanent modifications, no dealer visit required. If you ever want to revert to stock, simply remove them. It's the fastest way to personalize your Velar's exterior. What's Included 🎨 4× Carbon Fiber Covers Front and rear door handle set ✓ Pre-Cut & Ready to Fit Laser-aligned for perfect fitment 📋 Installation Guide Step-by-step instructions included 🛡️ Quality Assurance 30-day money-back guarantee Product Highlights Authentic carbon fiber TPU material with premium finish Laser-cut precision for flawless alignment on all four doors SVR-inspired aesthetic—aggressive, modern, purposeful Clip-on design—zero modifications to factory handles Exceptional adhesion—stays secure in all weather conditions Simple 5-minute installation—no tools, no expertise required Reversible upgrade—remove anytime without residue Lightweight construction—no impact on vehicle dynamics UV-resistant finish maintains color and depth long-term Direct fit for 2017–2018 Range Rover Velar models Compatibility Vehicle Model Year Range Compatibility Range Rover Velar L560 2017–2018 Direct Fit Range Rover Velar L560 2019–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty Level: Beginner | Time Required: 5–10 minutes Clean your factory door handles thoroughly with mild soap and water. Dry completely. Carefully position the first carbon fiber cover over the front-left door handle, ensuring alignment with handle edges. Apply firm, even pressure across the entire cover surface to activate adhesion. Hold for 10 seconds. Repeat steps 2–3 for the remaining three handles (front-right, rear-left, rear-right). Allow adhesive to cure for 24 hours before opening doors or exposing to moisture. Pro Tip: Warm the adhesive slightly (blow dryer on low heat, 30 seconds) to enhance bonding on cold days. Do not force installation—if a cover doesn't sit flush, remove and reposition. Upgrade Your Velar Today Premium carbon fiber styling shouldn't require a dealer visit or a premium price. These handles prove it. SVR-level aesthetics, genuine materials, and install-it-yourself simplicity. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names and trademarks belong to their respective rights holders.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Aluminium Door Speaker Panel Trim for Range Rover Velar 2017–2018 Precision-cut aluminium alloy speaker surround panels that replace the factory plastic trim and instantly elevate the door card aesthetics of your Velar's interior. Range Rover Velar 2017–2018 Aluminium Alloy Silver Finish Interior Trim LLK1146 ISO9001 Certified No Drilling Required Overview The Range Rover Velar arrived as a design-forward statement from Land Rover — a vehicle where interior detailing was elevated to something genuinely considered. Every surface, every material choice in the Velar's cabin was deliberate. The speaker panels on the door cards are a prime example: they sit in your sightline every time you glance at the door, and the stock plastic surrounds, while functional, do little justice to the cabin's overall intent. These silver aluminium alloy door speaker panel trims are designed specifically for the 2017 and 2018 Range Rover Velar. Machined from lightweight aluminium alloy, they deliver a cooler, more refined surface finish compared to the factory plastic — catching ambient light in the way that premium materials do. The silver tone pairs naturally with the Velar's interior colour palette, complementing brushed trim inserts and contrasting tastefully against both light and dark upholstery choices. Installation requires no modification whatsoever. Each panel is backed with high-strength automotive double-sided tape, meaning a clean fit with no tools, no drilling, and no permanent changes. If you're the sort of owner who values the Velar's design language and simply wants the interior details to reflect that more completely, these trims are a straightforward, satisfying upgrade. What's Included 🔊 Door Speaker Panel Trims Full set of aluminium alloy surrounds for door speaker apertures 🔲 Pre-Applied Adhesive Tape High-bond automotive double-sided tape pre-fitted to each panel 📄 Installation Instructions Step-by-step guide included for clean, accurate fitment Product Highlights Precision-cut aluminium alloy construction for lasting quality Silver finish complements the Velar's premium interior palette Manufactured to ISO9001 quality management standards Pre-applied automotive-grade double-sided adhesive tape No drilling, cutting, or permanent modification required Direct OEM-location fitment — designed specifically for Velar door cards Lightweight at 524g total — no impact on door function or feel Significantly upgrades the visual quality over factory plastic surrounds Reversible installation — can be removed without damage Fully compatible with factory door speaker and audio systems Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017–2018 All Trim Levels (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 Post-facelift Models Verify Before Purchase Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Defender L663 2020–2024 All Variants Not Compatible If your Velar is a 2019 or later model, please contact us on +44 203 943 9919 before ordering so we can confirm fitment for your specific build date. Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the door card surfaces around the speaker apertures are free from dust, grease, or any residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit each panel against the speaker surround before removing the adhesive backing. Confirm alignment and positioning carefully against the factory speaker grille location. Once satisfied with alignment, peel back approximately one third of the tape backing. Carefully position the leading edge of the panel, pressing firmly as you peel and lay the remainder of the tape. Apply sustained firm pressure across the entire panel surface for 30–45 seconds to ensure full adhesive contact with the door card. Repeat for all remaining door speaker panels. Allow 30 minutes before closing doors or applying lateral pressure to the trim. ⚠ Note: Do not attempt installation in cold temperatures below 10°C — adhesive performance may be reduced. If installing in cooler conditions, warm the door card surface gently with a heat gun on a low setting before applying panels. Upgrade Your Velar's Interior Browse the full range of Range Rover Velar interior accessories at Victorious Automotive — curated specifically for owners who hold their vehicle to a higher standard. Shop Range Rover Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Carbon Fiber Dashboard Trim for Range Rover Velar 2017–2020 Genuine carbon fiber aesthetic upgrade that elevates your Velar's interior with a premium motorsport finish. Velar 2017-2020 Carbon Fiber Dashboard Trim ABS Material Adhesive Install ISO9001 Certified Overview The Range Rover Velar represents British design at its finest—clean lines, minimalist interiors, and a focus on refinement. This carbon fiber dashboard trim builds on that philosophy by introducing a subtle but unmistakably premium touch to your cabin. Manufactured from high-quality ABS composite with an authentic carbon fiber weave finish, this trim piece measures 20cm in length and fits precisely into the Velar's dashboard topography. It's not about making a loud statement; it's about the discerning driver who appreciates quality details. The material is durable, UV-resistant, and will maintain its appearance through years of use. Installation is straightforward: backed with premium automotive adhesive tape, no drilling or fasteners required. Once in place, it transforms your dashboard from standard to bespoke in seconds—exactly what Velar owners expect. What's Included 📦 Carbon Fiber Dashboard Trim 20cm × 8cm trim piece with carbon weave 🔖 Pre-applied Adhesive Backing Premium automotive-grade tape, ready to install 📋 Installation Guide Simple step-by-step instructions included ✓ ISO9001 Certification Manufactured to international quality standards Product Highlights Authentic carbon fiber weave design—not a printed graphic Lightweight ABS construction—only 40g, zero impact on weight distribution Perfect fit for Velar 2017, 2018, 2019, and 2020 model years UV-resistant finish maintains appearance in direct sunlight Pre-applied automotive adhesive—no additional tape or fasteners needed Measures 20cm × 8cm × 3cm—designed for dashboard contours Removable without damage to original trim (adhesive tape cleans off cleanly) Certified to ISO9001 manufacturing standards Complements both black and light cabin interiors OEM-grade finishing—professional appearance, premium feel Compatibility Model & Year Compatibility Range Rover Velar 2017 Direct Fit Range Rover Velar 2018 Direct Fit Range Rover Velar 2019 Direct Fit Range Rover Velar 2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Sport (All) Not Compatible Range Rover Evoque (All) Not Compatible Installation Difficulty Level: Beginner | Time Required: 5–10 minutes Prepare the surface: Clean your dashboard trim area with a microfiber cloth and isopropyl alcohol. Allow to dry completely. Position the trim: Carefully align the carbon fiber trim piece on your dashboard. Use the existing dashboard lines as a visual guide. Apply pressure: Once positioned, press firmly along the entire length for 10–15 seconds to activate the adhesive bond. Allow cure time: Wait 24 hours before exposing the trim to heat, direct sunlight, or heavy vibration for maximum adhesion strength. Inspect: Check all edges for secure contact. If any edge lifts, gently peel back and reapply pressure. Note: This trim is designed for interior use only. Ensure dashboard surface is clean and free of dust or residue for best adhesion. Do not install in temperatures below 10°C or above 35°C. Ready to Elevate Your Velar's Interior? Premium carbon fiber trim is a signature touch of refinement. Add this to your Velar and experience the difference attention to detail makes. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket supplier. This product is not manufactured, endorsed, or affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover entity. All vehicle names, logos, and model designations are the property of their respective manufacturers and are used for identification purposes only.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Dashboard Trim for Range Rover Velar 2017–2020 A single, precision-fitted piece that transforms the Velar's centre dashboard with a refined matte silver finish — installed in under two minutes, no tools required. Range Rover Velar 2017–2020 Matte Silver ABS Plastic Dashboard Trim Adhesive Fit Interior Upgrade No Drilling Overview The Range Rover Velar was designed to sit between practicality and pure luxury — a vehicle that rewards those who pay attention to detail. From the flush door handles to the all-digital Touch Pro Duo interface, every element of the Velar's interior was conceived with intent. Yet the factory dashboard trim, for all its refinement, finishes in a flat, unremarkable tone that leaves something to be desired for owners who truly know what this cabin is capable of. This Matte Silver Dashboard Trim is purpose-built to slot directly over the existing Velar centre dashboard surround, delivering an immediate visual uplift without any permanent modification. The matte silver tone is understated and considered — it complements the Velar's interior palette rather than competing with it, adding contrast, depth, and a sense of bespoke craftsmanship that the standard trim simply doesn't offer. Manufactured from high-quality ABS plastic and pre-fitted with automotive-grade adhesive tape on the reverse, this piece requires no drilling, no wiring, and no professional fitting. If you can clean a surface and apply pressure, you can complete this upgrade in under two minutes. For Velar owners who take pride in their interior presentation, this is one of the most efficient upgrades available. What's Included 🪟 Dashboard Trim Cover 1 piece — matte silver ABS, pre-cut to Velar fitment 🔲 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape — factory-applied to reverse 📄 Fitment Guide Simple step-by-step installation reference included Product Highlights High-quality ABS plastic construction — durable and lightweight Matte silver finish — refined, non-reflective, OEM-style tone Precision-cut to factory Velar dashboard dimensions Pre-applied automotive adhesive tape on reverse face Tool-free installation — no drilling, no clips, no mess Installation completed in under 2 minutes Fully reversible — leaves no damage on removal Single piece (1pcs) — clean, seamless coverage Compatible with all trim levels of the 2017–2020 Velar Designed and tested specifically for Range Rover Velar interiors Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S / SE / HSE / R-Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Not Confirmed Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Land Rover Discovery 5 2017–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure the existing dashboard trim surface is clean, dry, and free from dust or grease. Use an isopropyl alcohol wipe if available for best adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse of the trim piece. Align the matte silver trim cover carefully with the existing dashboard surround — take a moment to confirm positioning before pressing. Apply firm, even pressure across the full surface of the piece for 30–60 seconds to activate the adhesive bond. Allow 30 minutes at room temperature before exposing to extreme heat or cold for a fully secure set. ⚠ Note: Do not attempt installation immediately after the vehicle has been in direct sunlight or extreme cold. Surface temperature affects adhesive performance. Allow the interior to reach a stable ambient temperature before fitting. Upgrade Your Velar Interior Today The Velar deserves an interior that matches its exterior ambition. This matte silver dashboard trim is one of the simplest, most impactful upgrades you can make — and it takes less time to fit than it does to make a coffee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Support: Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Cup Holder for Range Rover Velar 2017–2020 Transform your rear cabin with hand-fitted carbon fibre detailing that rivals SVR specification models. Velar 2017–2020 Carbon Fibre Clip-On SVR Look Premium TPU Overview The Range Rover Velar remains one of the most beautifully proportioned luxury SUVs on the road. Its minimalist interior philosophy extends to the rear cabin, where understated climate controls occupy the space between rear seats. If you own a 2017–2020 Velar and want the assertive presence of an SVR variant without the full powertrain commitment, this carbon fibre rear cup holder upgrade is your answer. This is a direct replacement for the standard cup holder cover. Instead of blending with the plastics around it, high-grade carbon fibre TPU creates a striking focal point that catches light and draws the eye downward. The weave pattern reflects attention to detail—the kind you'd find in Range Rover's dedicated performance division. Each piece is laser-cut for absolute precision, meaning zero gaps, zero alignment guesswork, and zero disappointment when it arrives. Installation takes minutes. The new cover simply clips over your existing climate control housing. No tools, no drilling, no modifications to the vehicle. Remove it in seconds if needed. It's the ideal entry point into carbon interior styling, and a perfect pairing for other SVR upgrades like door handles, shift paddles, or centre console trims. What's Included 📦 Carbon Fibre Cup Holder Cover Precision laser-cut TPU with 3K weave finish 🔧 Installation Guide Step-by-step photo instructions included ✨ Cleaning Cloth Microfibre cloth to maintain finish Product Highlights Hand-fitted carbon fibre TPU material for premium durability Laser-cut precision ensures perfect alignment first time Clips over existing climate control housing—no permanent modification Matches SVR interior specification look and feel Lightweight yet rigid construction withstands daily use Authentic 3K carbon weave visible through clear topcoat Weather-resistant material safe for all cabin temperatures Part of Victorious Automotive carbon interior package ecosystem Works seamlessly with factory rear cup holder functionality 30-day money-back guarantee—zero risk to try Compatibility Model Year Range Status Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Evoque All Years Not Compatible Range Rover Sport All Years Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Power off the vehicle and ensure the cabin has cooled to room temperature. Locate the rear cup holder cover (climate control panel between rear seats). Gently lift the existing cover to expose the clip points underneath. Align the carbon fibre cover with the four mounting clips and press firmly downward until you hear a click at each corner. Verify the cover sits flush with no rocking or movement. Test cup holder functionality. Clean the exposed carbon fibre weave with the included microfibre cloth. Note: The climate control functionality below remains unchanged. This cover sits on top and does not interfere with airflow or controls. If the cover feels loose after installation, remove it and inspect clips for debris. Complete Your SVR Interior Ambition One detail at a time, you can transform your Velar into the high-performance variant you love. This carbon rear cup holder is the perfect starting point—affordable, reversible, and instantly visible to anyone who rides in the rear cabin. Explore All Velar Upgrades Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any parent company. All vehicle names, logos, and trademarks are the property of their respective owners and used for identification purposes only. Product fitment and compatibility are based on manufacturer specifications and field testing. Always verify compatibility before purchase.

Victorious Automotive · Range Rover Velar · Interior Upgrades Stainless Steel Sport Pedals for Range Rover Velar 2017–2020 Precision-crafted stainless steel and rubber pedal covers that bring a sharper, more driver-focused feel to the Velar's already refined cabin — with a fitment engineered specifically for 2017–2020 models. Range Rover Velar 2017–2020 Stainless Steel Rubber Inserts Direct Fit Brake & Accelerator No Drilling Required Interior Upgrade Overview The Range Rover Velar arrived as one of Land Rover's most design-forward vehicles — a study in restrained luxury that brought a minimalist, tech-driven interior to the Velar lineup. Every surface in the cabin was considered carefully, and the footwell is no exception. Yet the standard pedal covers, while functional, rarely reflect the sporting character that many Velar owners drive with. These stainless steel pedals address that directly. Constructed from high-grade stainless steel with anti-slip rubber inserts, these pedal covers are precision-shaped to match the original brake and accelerator pedal dimensions on 2017–2020 Range Rover Velar models. The result is a clean, purposeful upgrade that improves both the visual quality of the footwell and the tactile confidence underfoot — particularly during spirited driving where pedal feel genuinely matters. Installation requires no specialist tools, no permanent modifications and no drilling. The covers clip securely over the factory pedals in minutes, making this one of the most impactful and straightforward interior upgrades available for the Velar. Whether you're refreshing a well-used footwell or simply finishing the cabin to a higher standard, these pedals deliver exactly what the Velar's character demands. What's Included 🦶 Accelerator Pedal Cover Stainless steel with rubber grip inserts 🛑 Brake Pedal Cover Stainless steel with rubber grip inserts 🔩 Mounting Hardware Clips and fixings for secure no-drill fit 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-fit design for 2017–2020 Range Rover Velar High-grade stainless steel construction throughout Anti-slip rubber inserts for confident pedal control Covers both brake and accelerator pedals No drilling, cutting or permanent modification required Clip-on fitment installs in under 15 minutes Resistant to wear, moisture and everyday footwell conditions Polished finish complements the Velar's premium interior aesthetic Adds a subtle performance feel without altering factory function Direct factory pedal replacement aesthetic — OEM proportions retained Compatibility Vehicle Year Range Transmission Fitment Range Rover Velar (L560) 2017–2020 Automatic Direct Fit Range Rover Velar (L560) 2021–2023 Automatic Verify Before Purchase Range Rover Evoque (L538) 2011–2018 Automatic Not Compatible Range Rover Evoque (L551) 2019–2024 Automatic Not Compatible Range Rover Sport (L494) 2013–2020 Automatic Not Compatible Range Rover Vogue (L405) 2013–2020 Automatic Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and the footwell is clean and dry before beginning fitment. Remove any floor mats from the driver's footwell to give clear, unobstructed access to both pedals. Align the accelerator pedal cover over the factory accelerator pedal, ensuring the rubber inserts face upward and the mounting clips line up with the pedal edges. Press the cover firmly onto the pedal until all clips engage and the cover sits flush with no movement or rattle. Repeat the same process for the brake pedal cover, taking care to centre the cover evenly over the factory pedal face. Apply light foot pressure to both pedals to confirm secure fitment before returning the floor mat and test driving. ⚠ Safety Note: Before driving, always verify that both pedal covers are firmly secured and do not interfere with pedal travel or return. If any cover feels loose or obstructs pedal movement, remove immediately and re-fit before use. Complete Your Velar's Interior These pedals are just the beginning. Explore the full Victorious range of Range Rover Velar accessories — from interior trim upgrades to exterior styling — and build a cabin that's entirely your own. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver ABS Door Speaker Decoration Trim — Range Rover Velar 2017–2020 Precision-cut matte silver TPU trim panels that clip directly over your Velar's existing door speaker surrounds — delivering an instant SVR-inspired interior upgrade with zero permanent modification. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Set of 4 Clip-On Fit SVR Look Interior Trim No Drilling Overview The Range Rover Velar is one of the most design-forward vehicles Land Rover has produced — every surface, every line considered. But the standard door speaker surrounds, while clean, leave room for the kind of elevated finish that owners of this calibre of vehicle rightly expect. These matte silver door speaker decoration trims are engineered precisely for that gap between standard and exceptional. Crafted from high-grade ABS with a premium TPU overlay in a refined matte silver finish, each piece is laser-cut to match the exact curvature and geometry of the Velar's door panel architecture. The result is a flush, factory-quality appearance that draws the eye without overwhelming the cabin's restrained design language. Think of it as the detail that makes the interior feel complete — the kind of finish you'd expect on the SVR specification. Installation requires no tools, no adhesives, and no modification to your vehicle. Each trim panel clips securely over the existing door speaker cover using a precision retention system, meaning they can be fitted or removed in minutes. As part of our wider Velar Interior Package series, these trims pair beautifully with our dashboard, centre console, and door handle accent pieces for a fully cohesive interior transformation. What's Included 🔲 Front Left Speaker Trim Driver-side door, precision laser-cut fit 🔲 Front Right Speaker Trim Passenger-side door, mirror-matched profile 🔲 Rear Left Speaker Trim Rear driver-side door panel fitment 🔲 Rear Right Speaker Trim Rear passenger-side door panel fitment 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Matte silver finish for a premium, understated aesthetic High-grade ABS construction with quality TPU surface layer Laser-cut for exact dimensional accuracy and panel alignment Clip-on installation — no tools, drilling, or adhesives required Full set of four pieces covers all door speaker positions Replicates the SVR interior specification look and feel Completely reversible — original trim remains undamaged UV-stable finish resists discolouration and interior sun exposure Fits seamlessly within the Velar's existing door panel geometry Part of a wider Velar interior trim collection for cohesive styling Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2021–2022 All Variants Verify Before Purchase Range Rover Evoque (L538) All Years All Variants Not Compatible Range Rover Evoque (L551) All Years All Variants Not Compatible Range Rover Sport (L494) All Years All Variants Not Compatible Range Rover Vogue (L405) All Years All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Clean each door speaker surround thoroughly using a microfibre cloth to remove any dust, oils, or residue that could prevent a secure fit. Remove each trim panel from its packaging and identify the correct piece for each door position — front left, front right, rear left, rear right. Hold the trim panel against the corresponding speaker surround and align the outer edges carefully with the existing door panel profile. Apply gentle, even pressure across the surface of the trim — starting from the centre and working outward — until all retention clips engage and the panel sits flush. Run your finger around the perimeter of each piece to confirm full seating and check for any gaps or misalignment before closing the doors. Repeat for all four door positions. No adhesive, heat gun, or additional fixings are required. Note: Ensure the door panel surface is completely dry before fitting. Do not force the clips if the panel feels misaligned — reposition and re-attempt to avoid stress marks on either the trim piece or the original door cover. Explore More Velar Accessories This trim is part of our curated Range Rover Velar interior and exterior collection. Browse the full range of accessories designed specifically for your vehicle at victorious.shop/collections/range-river-velar. Elevate Your Velar Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision accessories that respect the vehicle as much as you do. Worldwide shipping via DHL, FedEx, UPS, and TNT — and a 30-day money-back guarantee on every order. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Electronic Handbrake Switch Frame — ABS Interior Trim for Range Rover Velar 2017–2020 Elevate your Velar's centre console with a precision-cut matte silver handbrake switch surround that delivers the premium SVR aesthetic in minutes — no tools required. Range Rover Velar 2017–2020 Matte Silver ABS / TPU Electronic Handbrake Frame Clip-On Fit No Drilling SVR Style Interior Trim Overview The Range Rover Velar introduced one of the most architecturally refined interiors Land Rover has ever produced — a clean, horizontal layout anchored by a dual-stack touchscreen and a beautifully minimal centre console. It's a cabin that rewards attention to detail, and that means even the smallest trim panels can make a meaningful difference to how the whole interior reads. This matte silver electronic handbrake switch frame is precision laser-cut to wrap seamlessly around the existing parking brake control area on Velar models produced between 2017 and 2020. Manufactured from high-quality ABS and TPU, the finish is a sophisticated brushed silver that closely mirrors the uprated trim found on top-specification and SVR-inspired Range Rover interiors. It clips directly over the factory surround without any adhesive, drilling, or modification to your vehicle's existing panels. Forming part of our broader Velar Interior Package range, this piece is designed to be combined with other silver trim upgrades across the console and door cards for a fully cohesive, factory-upgrade appearance. Whether you're making a single focused improvement or building out a complete interior refresh, this handbrake frame is an effortless starting point with an impact well above its price point. What's Included 🖼️ Handbrake Switch Frame Matte silver ABS/TPU surround, laser-cut to shape 📋 Fitting Instructions Simple clip-over guidance included Product Highlights Precision laser-cut for an exact, flush fit on the Velar centre console Matte silver finish matches SVR and top-specification Range Rover trim tones Clips directly over the existing handbrake surround — zero drilling required High-quality ABS and TPU construction for long-term durability and colour stability No adhesives needed — fully reversible upgrade with no damage to factory trim Designed as part of a wider Velar interior trim package for a cohesive look Covers the parking brake control area without interfering with switch operation Resistant to the daily wear of UV exposure, temperature change, and handling Achieves the premium SVR interior aesthetic without the cost of a full retrim Compatible with both standard and upgraded centre console configurations on the Velar Compatibility Vehicle Years Trim Level Fitment Range Rover Velar (L560) 2017–2020 S, SE, HSE, R-Dynamic, First Edition Direct Fit Range Rover Velar (L560) 2021–2023 All Trims Verify Before Purchase Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Evoque L538 / L551 All Years All Trims Not Compatible Land Rover Discovery 5 All Years All Trims Not Compatible If your Velar was produced after 2020 or you are unsure of your build date, please contact our team on +44 203 943 9919 before ordering. Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure your vehicle is parked, the engine is off, and the electronic handbrake is engaged in its resting position. Clean the existing handbrake surround area with a dry microfibre cloth to remove any dust or residue that could interfere with the clip fit. Align the matte silver frame over the factory handbrake switch surround, checking that the cutouts line up precisely with the switch housing. Apply even, firm pressure around the perimeter of the frame until all retaining clips engage and the trim sits flush against the existing panel. Run your finger around all edges to confirm there are no lifted sections or gaps — the piece should feel solid and fully seated. Step back and inspect the fitment. For best results, pair with other Victorious silver interior trim pieces from our Velar collection. Note: Do not apply adhesive or heat. This trim is designed to be fully reversible. If resistance is felt during installation, check alignment before applying further pressure. Forcing a misaligned piece may cause minor scuffing to the factory surround. Complete Your Velar Interior This handbrake frame is one component of our full Range Rover Velar interior trim package. Browse the complete collection to match your console, door switches, air vent surrounds, and gear selector area in the same matte silver finish for a fully unified result. → Browse All Range Rover Velar Accessories Upgrade Your Velar Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior upgrades. Worldwide shipping via DHL, FedEx, and UPS — backed by our 30-day money-back guarantee. Shop Velar Interior Trim Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Velar · Exterior Styling R-Dynamic Side Vent Fender Trim for Range Rover Velar 2017–2020 — 4-Piece Set Give your Velar the aggressive R-Dynamic fender vent aesthetic with a precision-fit, peel-and-stick trim upgrade that installs in minutes and lasts for years. Range Rover Velar 2017–2020 High-Grade ABS R-Dynamic Look Rose Gold / Black 4-Piece Set No Drilling Required Peel & Stick Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — a cab-forward silhouette, flush door handles, and a cabin experience that punches well above its class. But for owners who want to push that aesthetic further, the standard side fender treatment can feel understated. The R-Dynamic trim line addresses that with purposeful, sculpted side vents that add visual tension and sporting intent to the bodywork. These R-Dynamic Side Vent Fender Trims are precision-manufactured from high-grade ABS plastic and finished to complement the Velar's sharp lines. Offered in Rose Gold and Gloss Black, each finish is designed to either contrast boldly against lighter paint codes or integrate seamlessly with darker hues like Santorini Black and Narvik Black. The set includes four individual vent trim pieces — two per side — mirroring the factory R-Dynamic specification. Installation requires no specialist tools, no drilling, and no permanent modification to your vehicle. The 3M-grade adhesive backing bonds firmly to the factory fender surface, and a brief pass with a hairdryer activates the adhesive for a stronger, longer-lasting hold. Whether you're building a full exterior detail package or simply want one impactful upgrade, these fender vents deliver genuine visual transformation for a fraction of the cost of factory R-Dynamic bodywork. What's Included 🔲 Front Fender Vents × 2 One per side, left and right matched pair 🔲 Rear Fender Vents × 2 One per side, left and right matched pair 🩹 3M Adhesive Tape Pre-applied to each piece — no extras needed 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Replicates factory R-Dynamic side vent styling High-grade ABS plastic construction throughout Available in Rose Gold and Gloss Black finishes Complete 4-piece set — full vehicle coverage Pre-applied 3M-grade adhesive on every piece No drilling, cutting, or permanent modification Heat-activated adhesive for a stronger bond Precision-matched to Velar fender contours UV-resistant finish — won't fade or discolour Compatible with all trim levels, 2017–2020 Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S, SE, HSE, First Edition Direct Fit Range Rover Velar 2017–2020 R-Dynamic S, R-Dynamic SE, R-Dynamic HSE Direct Fit Range Rover Velar 2021–2024 All Variants (facelift) Verify Before Purchase Range Rover Sport L494 2013–2022 All Variants Not Compatible Range Rover Vogue L405 2013–2021 All Variants Not Compatible Defender L663 2020–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None (hairdryer recommended) Dry-fit first. Hold each vent trim piece against its intended fender position before committing. Confirm orientation and alignment against the bodywork contour. Clean the surface. Thoroughly clean and degrease the fender area using an isopropyl alcohol wipe or panel wipe. Ensure the surface is completely dry before proceeding. Any residue will compromise the adhesive bond. Warm the adhesive. Peel the protective backing from the 3M tape. Using a hairdryer on a low-to-medium setting, gently warm the adhesive tape for 10–15 seconds. This activates the adhesive and significantly improves long-term bonding strength. Apply with firm pressure. Position the vent trim carefully and press it onto the cleaned surface with firm, even pressure for at least 30 seconds. Work from the centre outward to avoid air pockets. Allow cure time. Leave the vehicle undisturbed for a minimum of 24 hours before washing or exposing to rain, allowing the adhesive to fully cure to the bodywork. Installation complete. Repeat for all four pieces and step back to enjoy the transformation. ⚠ Important: Do not attempt installation in cold temperatures below 10°C — the adhesive will not bond effectively. Always warm the surface and tape before application. Avoid fitting in direct sunlight as this may cause the tape to set before correct positioning is achieved. Complete Your Velar's Exterior Browse our full Range Rover Velar styling collection — from bonnet trims and mirror caps to front grille surrounds and door handle covers. Every part is handpicked for fit, finish, and longevity. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product images are representative; actual finish may vary slightly between production batches. Always verify compatibility with your specific vehicle configuration before purchase. For fitment queries, contact our team at +44 203 943 9919.

Victorious Automotive · Range Rover Sport L494 / Vogue L405 · Interior Trim Carbon Fiber Seat Trim for Range Rover Sport L494 & Vogue L405 (2014–2017) A precision clip-on carbon TPU seat trim that delivers the SVR aesthetic to your Sport or Vogue cabin — no tools, no fuss, no compromise. L494 Sport L405 Vogue 2014–2017 Carbon TPU Clip-On Fit SVR-Inspired Look Laser-Cut Precision No Drilling Required Interior Upgrade Overview The Range Rover Sport L494 and Vogue L405 set a benchmark for refined performance SUVs — interiors designed with intent, materials chosen for presence. But for owners who want that extra edge of visual aggression, the standard seat surround trim leaves something to be desired. The factory finish is clean, but it doesn't speak to the SVR character that so many Sport and Vogue owners aspire to. Our Carbon Fiber Seat Trim is a direct response to that. Precision laser-cut from durable carbon TPU, each trim is engineered to clip cleanly over the existing seat trim panel, transforming the look of the seat surround area without any permanent modification. The carbon weave texture adds depth and tactility to the cabin, elevating the visual atmosphere around the seat in a way that feels factory-fitted — not aftermarket. This is the kind of detail that enthusiasts notice. Whether you're building toward a full SVR-inspired interior or simply adding considered touches to an already impressive cabin, the carbon seat trim delivers a confident upgrade with zero risk to your vehicle. Two trims are included per order — one for each front seat — ensuring a consistent, symmetrical transformation across the cabin. What's Included 🪑 Carbon Fiber Seat Trim ×2 One per front seat — matched pair for symmetrical fitment 📋 Fitment Guide Step-by-step installation reference included Product Highlights Precision laser-cut carbon TPU for exact factory-panel alignment Clip-on installation — no tools, adhesive, or drilling required Designed to achieve the coveted SVR interior aesthetic Durable TPU construction resists heat, UV fade, and daily wear Deep carbon weave texture adds visual depth and tactility Seamless integration with existing seat surround panels Supplied as a matched pair for consistent front-cabin fitment Fully reversible — original trim remains completely undamaged Compatible with both Sport L494 and Vogue L405 seat configurations Lightweight construction adds zero perceptible bulk to seat area Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2018–2022 Verify Before Purchase Range Rover Sport SVR L494 2014–2017 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Unsure about your specific build or seat variant? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Begin with the seat in its normal upright position. Ensure the seat surround area is clean and dry — a quick wipe with a microfibre cloth removes any dust or residue that could affect the clip seating. Remove the carbon seat trim from its packaging and orient it correctly against the existing factory panel. The trim is directional — match the contour profile to the panel shape before applying pressure. Align the clip points along the top edge of the trim with the corresponding edges of the factory panel. Start from one end and work progressively across, pressing firmly but evenly until each clip engages with a tactile click. Run your fingers along the full perimeter of the trim to confirm all clips have seated fully and the edges are flush with the surrounding surfaces. There should be no flex or movement in the installed trim. Repeat the process for the second seat. Step back and inspect both trims from a natural seating angle — the result should appear factory-fitted with no visible gaps or misalignment. ⚠ Important: Confirm your exact model year and seat variant before installation. Trim profiles can vary between production runs within the same model year. If the trim does not align naturally during dry-fit, do not force the clips — contact our support team for guidance. Forcing an incompatible fit may damage the factory panel. Upgrade Your Sport or Vogue Interior Explore the full range of interior and exterior accessories for the Range Rover Sport L494 and Vogue L405 — engineered to the same standard of precision and quality. Shop Range Rover Sport L494 → Shop Range Rover Vogue L405 → Buying two items? Use the code below at checkout for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Velar · Headlamp Protection Headlamp Tint Pre-Cut Film — Range Rover Velar 2017–2020 Precision pre-cut TPU headlamp protection film that shields your Velar's signature LED clusters from stone chips, road debris, and UV degradation — in Blackened or Transparent finish. Range Rover Velar 2017–2020 Top-Grade TPU Self-Healing Pre-Cut Blackened & Transparent Scratch Resistant 2-Piece Kit Overview The Range Rover Velar occupies a unique space in the Land Rover lineup — its flush surfaces, distinctive blade-style LED daytime running lights and sculpted headlamp housings are a defining part of its identity. Keeping those clusters looking pristine is non-negotiable for any Velar owner who takes their vehicle seriously. This pre-cut headlamp tint film is engineered specifically for the 2017–2020 Range Rover Velar, meaning there is no trimming, no guesswork and no wasted material. Made from top-grade TPU (Thermoplastic Polyurethane), the film delivers genuine self-healing properties — minor swirl marks and light surface scratches disappear with the warmth of sunlight or warm water, keeping the finish looking factory-fresh. Available in Transparent (near-invisible protection) and Blackened (a smoked stealth aesthetic), both options preserve full light output while adding a layer of durable defence against stone chips, insects, road grime and UV fading. TPU film at this grade outperforms traditional PVC or vinyl alternatives in longevity, clarity retention and edge-seal durability — qualities that matter on a vehicle designed to be driven hard and admired standing still. Each kit includes application tools, making this a satisfying home installation for any detail-minded owner. What's Included 💡 Pre-Cut Headlamp Film × 2 One piece per headlamp, cut to Velar profile 🛠️ Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step fitting reference 🎨 Choice of Finish Blackened smoked or crystal transparent Product Highlights Precision pre-cut to fit Range Rover Velar 2017–2020 headlamp housings Top-grade TPU material with genuine self-healing surface technology Available in Blackened smoked and Transparent clear finishes Protects against stone chips, road debris and insect damage UV-resistant formulation prevents yellowing and haze over time Scratch-resistant outer layer maintains optical clarity No cutting or trimming required — dry-fit ready out of the pack Preserves full LED light output in both finish options Residue-free removal without damage to headlamp housing Application tools included for a clean, professional finish Compatibility Model Year Range Fitment Range Rover Velar 2017–2020 Direct Fit Range Rover Evoque (L538) 2015–2019 Direct Fit Range Rover Evoque (L551) 2020–Present Direct Fit Discovery Sport (L550) 2016–Present Direct Fit Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Vogue (L405) 2018–Present Direct Fit Range Rover Sport (L494) 2014–2017 Direct Fit Range Rover Sport (L494) 2018–Present Direct Fit Range Rover Sport L461 (2022+) 2022–Present Verify Before Purchase Range Rover Vogue L460 (2022+) 2022–Present Verify Before Purchase Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Included in kit Thoroughly clean both headlamp housings with an isopropyl alcohol wipe to remove all dust, wax, grease and residue. Any contamination beneath the film will cause lifting. Work in a warm, dust-free environment — an indoor garage is ideal. Cold temperatures reduce film flexibility and adhesion quality. Lightly mist the headlamp surface with a slip solution (a few drops of baby shampoo in water works well) to allow repositioning during initial placement. Carefully peel the film from its backing and align it to the headlamp housing, starting from the centre and working outward. Use the included squeegee to push out air bubbles and excess slip solution from the centre towards the edges using firm, overlapping strokes. Carefully tuck and smooth all edges, ensuring full contact around curves and contours of the Velar headlamp profile. Allow the film to cure undisturbed for 24–48 hours before washing the vehicle or exposing the surface to standing water. Note: Ensure the film selected matches your exact model year. Headlamp housings changed between Velar facelifts — if you are unsure of your build date or specification, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Protect What Makes the Velar Distinctive Stone chips and road debris don't care about resale value. This precision-cut TPU film is the simplest, most effective way to keep your Velar's headlamps looking flawless — whether you choose stealth black or crystal clear. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar & Evoque · Interior Trim Aluminum Alloy Central Air Conditioning & Volume Knob Trim — Range Rover Velar 2017–2019 & Evoque 2019–2020 Precision-machined aluminum alloy knob ring trims that instantly elevate the tactile quality and visual refinement of your Velar or Evoque's central console. Range Rover Velar 2017–2019 Evoque 2019–2020 Aluminum Alloy 3-Piece Set Peel & Stick Install ISO9001 Certified 4 Colour Options Interior Trim Overview The Range Rover Velar and second-generation Evoque represent two of the most design-forward vehicles in the Land Rover lineup — clean surfaces, considered proportions, and an interior language that rewards those who notice the details. But the factory-finish plastic surrounding the climate and volume knobs has always been the one area where the interior falls just short of its own ambition. These aluminum alloy knob ring trims are engineered specifically for the Velar (2017–2019) and Evoque (2019–2020) centre console layout. Each ring is precision-formed from aerospace-grade aluminum alloy and finished to a standard that complements the vehicles' existing metalwork. Available in four colourways — silver, blue, rose gold, and red — there is an option to match whether your interior leans understated or expressive. ISO9001-certified manufacturing ensures dimensional accuracy for a flush, rattle-free fit. The result is a cabin upgrade that feels factory-intentional rather than aftermarket-applied — the kind of detail that Velar and Evoque owners will notice every single time they reach for the climate controls. What's Included ⭕ Knob Ring Trims × 3 Full set covering AC and volume knobs 🔵 Choice of 4 Finishes Silver, Blue, Rose Gold, or Red 🔧 Pre-Applied Adhesive 3M-style peel-and-stick backing included 📋 Fitment Guide Model-specific placement reference Product Highlights Precision-machined from durable aluminum alloy — not plastic ISO9001-certified production for consistent dimensional accuracy Direct-fit design — no cutting, drilling, or modification required Four finish options: Silver, Blue, Rose Gold, and Red Environmentally responsible materials throughout manufacture Rattle-free fit with flush surface alignment to factory trim Peel-and-stick installation — reversible and residue-minimal Elevates tactile feel every time you adjust climate or volume Complements existing brushed metal interior elements 3-piece set covers all central console knob positions in one kit Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2019 All Variants Direct Fit Range Rover Evoque (L551) 2019–2020 All Variants Direct Fit Range Rover Evoque (L538) 2011–2018 All Variants Not Compatible Range Rover Velar 2020+ All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes ⏱ Estimated Time: 10–15 Minutes  |  Difficulty: Beginner Ensure the vehicle interior is at room temperature — cold surfaces can reduce adhesive performance. Avoid installation below 10°C. Clean each knob base thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue from around the knob collar and allow to dry completely. Dry-fit each ring trim to confirm orientation and alignment before committing. The trims are shaped to sit flush — test the fit without removing the adhesive backing first. Peel the protective backing from one trim at a time. Position carefully over the knob base and press firmly from the centre outward for 30–60 seconds. Repeat for all three trims. Allow the adhesive to cure for at least one hour before subjecting the trims to heat from the climate system. ⚠ Note: Do not apply excessive rotational force directly to the trim rings — they are decorative overlays, not structural components. If a trim lifts at the edges after installation, reapply with a trim-safe adhesive promoter for a more permanent bond. Complete Your Velar or Evoque Interior These knob trims pair beautifully with our wider range of Velar and Evoque interior accessories. Browse the full collection or get in touch with our team for fitment advice — we know these vehicles inside out. Shop Range Rover Velar Accessories Shop Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Velar · Interior Trim Aluminum Alloy Door Speaker Cover Panel Trim — Range Rover Velar 2017–2018 (Set of 4) Precision-cut aluminum alloy speaker panel covers that elevate your Velar's interior finish with a clean, factory-complementary aesthetic — no drilling, no cutting, no compromise. Range Rover Velar 2017–2018 Aluminum Alloy Silver Finish Set of 4 No-Drill Fit ISO9001 Certified Model LLK1149 Overview The Range Rover Velar redefined what a Land Rover interior could feel like — minimalist, refined, and deliberately precise. It's a cabin that rewards attention to detail, which is exactly why owners of the 2017 and 2018 Velar look for ways to complement rather than disrupt that original design language. These aluminum alloy door speaker cover panels are engineered specifically for the Velar's four door openings, sitting flush over the existing speaker grille surrounds to introduce a subtle metallic upgrade that reads as both premium and purposeful. The silver brushed finish pairs naturally with the Velar's existing trim palette, whether your interior runs in light or dark upholstery tones. Constructed from aircraft-grade aluminum alloy and certified to ISO9001 manufacturing standards, these covers are built with the same rigour you'd expect from the vehicle itself. Installation requires no permanent modification — the panels attach securely via pre-applied double-sided tape, meaning fitment takes minutes and leaves no trace if removed. What's Included 🔲 Front Left Speaker Cover Driver-side front door panel 🔲 Front Right Speaker Cover Passenger-side front door panel 🔲 Rear Left Speaker Cover Driver-side rear door panel 🔲 Rear Right Speaker Cover Passenger-side rear door panel 📎 Pre-Applied 3M Tape Double-sided adhesive, factory-applied to each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Full set of 4 covers — all doors included in one purchase Premium aluminum alloy construction throughout Silver brushed finish complements Velar's interior palette ISO9001 certified manufacturing standards No drilling or permanent modification required Pre-applied double-sided tape for clean, secure fitment Precision die-cut to match Velar door panel geometry Lightweight at 258g total — no added bulk or panel stress Residue-free removal if reinstallation is ever needed Direct replacement aesthetic over factory speaker surrounds Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017 All Trims (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2018 All Trims (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 All Trims Verify Before Purchase Range Rover Evoque L551 2019–2024 All Trims Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 15–20 Minutes  |  Tools Required: None Begin with a clean, dry interior. Use a microfibre cloth to wipe down each door speaker surround area, removing any dust, oils, or residue that could affect adhesion. Dry-fit each panel cover before committing — hold it against the speaker area to confirm alignment and verify the piece sits flush with the door card surface. Peel the protective backing from the pre-applied double-sided tape on the rear of the first panel cover. Carefully align the cover over the speaker grille surround, starting from one edge and pressing down progressively to avoid air bubbles or misalignment. Apply firm, even pressure across the full surface of each cover and hold for 30–60 seconds to activate the adhesive bond. Repeat for all four door panels. Allow 1–2 hours before any heavy door use to allow the adhesive to fully cure. ⚠ Note: For best results, install in a warm environment (above 15°C / 59°F). Cold surfaces reduce adhesive effectiveness. Avoid applying in direct sunlight or on surfaces that are damp. Do not attempt to reposition once the tape has made contact with the panel. Complete Your Velar's Interior Browse our full Range Rover Velar accessories collection — from carbon fibre trim upgrades to gear selector surrounds, every piece is selected to respect the vehicle's original design intent. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If you are unsure, contact our team at +44 203 943 9919 before ordering.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Console Trim for Land Rover Range Rover Velar 2017 2018 A precision-cut ABS silver console upgrade trim that instantly elevates the centre console aesthetic of your Range Rover Velar with a clean, factory-complementary finish. Range Rover Velar 2017–2018 ABS Material Silver Finish Interior Trim No-Drill Fit ISO9001 Certified Model: LLK1350 Overview The Range Rover Velar arrived in 2017 as one of Land Rover's most design-forward statements — an interior shaped by restraint, precision, and a clear commitment to visual clarity. Every surface in the Velar's cabin was considered, and owners who want to preserve or sharpen that sense of premium detail understand that even small upgrades need to be done properly. This silver console trim is engineered specifically for the 2017 and 2018 Range Rover Velar and is designed to sit seamlessly within the existing centre console architecture. Manufactured from high-grade ABS plastic with a silver finish, it matches the Velar's existing trim language without overpowering it — bringing a subtle metallic lift to an interior zone that sees constant daily interaction. At 55cm in length and weighing just 500g, the trim is slim, precisely dimensioned, and straightforward to install using the pre-applied automotive-grade adhesive tape already bonded to the rear face. No drilling, no cutting, no specialist tools — just a clean, lasting result that looks as though it belonged there from the factory floor. What's Included 🪄 Silver Console Trim Panel ABS silver finish, model LLK1350 🔲 Pre-Applied Adhesive Tape Automotive-grade, bonded to rear face 📋 Fitting Guide Basic installation reference included Product Highlights Precision-fit design for Range Rover Velar 2017 and 2018 models High-grade ABS construction with durable silver finish Pre-applied automotive adhesive tape for clean, tool-free installation ISO9001 certified manufacturing process for quality assurance Lightweight at 500g — no stress on existing trim or panels Dimensionally accurate at 55cm × 30cm × 10cm for precise fit Complements the Velar's existing interior trim without clashing No drilling, cutting, or permanent modification required Factory-look finish that integrates naturally with OEM surfaces Designed and tested by metyoucar, a specialist interior trim brand Compatibility Vehicle Year Trim Level Fitment Range Rover Velar 2017 All variants Direct Fit Range Rover Velar 2018 All variants Direct Fit Range Rover Velar 2019–2022 All variants Verify Before Purchase Range Rover Sport L494 2013–2020 All variants Not Compatible Range Rover Evoque L538 All years All variants Not Compatible Range Rover Vogue L405 All years All variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the centre console surface is free from dust, grease, and any existing polish or wax residue — isopropyl alcohol works well for this. Dry-fit the trim panel first to confirm alignment and positioning before committing to adhesion. The panel should sit flush and natural against the console contours. Once satisfied with positioning, peel back the protective liner from the pre-applied automotive adhesive tape on the rear face of the trim. Carefully align the trim from one end and press firmly along the full length, applying consistent pressure for 30–60 seconds to ensure full bond contact. Allow the adhesive to cure for a minimum of 1 hour before exposing the area to heat, sunlight, or significant handling. Full bond strength is typically achieved within 24 hours. ⚠ Note: Avoid installation in cold environments below 10°C as this can reduce initial adhesive performance. Do not attempt to reposition the trim once the adhesive has made contact with the console surface — the bond is designed to be permanent. Complete Your Velar Interior Browse our full collection of Range Rover Velar accessories — from interior trim upgrades to exterior styling pieces — curated specifically for the Velar's unique design language. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiary brands. All vehicle names, model references, and trademarks are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim Sands Wood Grain ABS Door Trim Set for Range Rover Velar 2017–2020 Transform your Velar's cabin with a precision-cut, clip-on wood grain door trim set that delivers the elevated SVR aesthetic — no drilling, no modifications, no compromise. Range Rover Velar 2017–2020 ABS / TPU Wood Grain Finish 4-Piece Set Clip-On Fit SVR Look No Drilling Overview The Range Rover Velar was designed from the outset to occupy a unique space in the Land Rover lineup — a vehicle where architecture and interior refinement are taken as seriously as capability. Yet for many owners of the standard and SE trim levels, the interior door panels can feel underwhelming against the Velar's undeniably bold exterior presence. This Sands Wood Grain ABS Door Trim set is purpose-built to close that gap. Crafted from high-quality TPU with a premium Sands wood grain surface finish, each piece is laser-cut to the exact profile of the Velar's door trim panels. The result is a seamless, factory-quality appearance that closely mirrors what you'd find in top-specification and SVR-inspired Velar builds — without the cost of a full interior retrofit. Part of our broader Wood Grain Interior Package series, these door trims are designed to work in harmony with matching dashboard, console, and pillar pieces for a fully cohesive cabin transformation. Whether you're upgrading for personal enjoyment or enhancing resale presentation, this is one of the most impactful interior changes you can make to your Velar. What's Included 🚪 Front Left Door Trim Driver-side panel, laser-cut to profile 🚪 Front Right Door Trim Passenger-side panel, matched finish 🚪 Rear Left Door Trim Rear driver-side, clip-on ready 🚪 Rear Right Door Trim Rear passenger-side, full set completion Product Highlights Precision laser-cut ABS panels for a flawless, gap-free fit on the Velar door cards Premium Sands wood grain TPU surface finish — rich, tactile, and refined Clip-over installation onto existing door trim panels — zero permanent modification Complete four-piece set covering all four door positions for a symmetrical interior upgrade Delivers the elevated SVR-inspired interior aesthetic at a fraction of the cost Resistant to fading, warping, and UV degradation in daily driving conditions Part of Victorious Automotive's full Wood Grain Interior Package for the Velar Lightweight construction — no additional load or stress on existing trim fixings Works with all standard Velar interior colour configurations from 2017–2020 Tool-free installation completable in under 30 minutes by any owner Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 Base / S / SE / R-Dynamic SE Direct Fit Range Rover Velar 2021–2022 Facelift Models Verify First Range Rover Velar 2023+ All Trims Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 All Years All Trims Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔧 Tools Required: None Start with the vehicle parked and all four doors fully open for clear, comfortable access to each panel. Clean the existing door trim surface with a dry microfibre cloth to remove any dust, oils, or residue that could affect the clip seating. Dry-fit each trim piece against its corresponding door panel before committing — confirm the laser-cut edges align precisely with the factory panel border. Beginning with the front driver's door, align the top edge of the wood grain trim to the factory panel and press firmly from the centre outward, engaging each clip point in sequence. Repeat for the remaining three doors — front passenger, rear driver, rear passenger — checking each piece seats flush with no visible gaps at the edges. Apply gentle, even pressure across the full face of each trim piece to ensure all clips are fully seated and the finish sits uniform. ⚠ Note: If your Velar has aftermarket door panels or has previously had interior repairs, clip alignment may vary slightly. Dry-fit all pieces thoroughly before final installation. Do not force any panel — all clips should engage with light, steady pressure only. Elevate Every Journey in Your Velar The interior of your Range Rover Velar deserves the same attention you gave its exterior. This wood grain door trim set is the easiest, most rewarding upgrade you can make to your cabin — and it takes less time to fit than your morning coffee run. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Window Switch Surround Trims for Range Rover Velar 2017–2020 Bring factory-specification refinement to your Velar's door panels with a set of precision-cut matte silver window switch surrounds — installed in under two minutes, no tools required. Range Rover Velar 2017–2020 ABS Plastic Matte Silver 4-Piece Set No-Tool Fit Pre-Applied Adhesive Interior Trim Overview The Range Rover Velar set a new standard for interior design when it arrived in 2017 — clean surfaces, architectural lines, and a level of cabin sophistication that felt genuinely progressive. Yet even in standard specification, certain details that feature on higher-grade Velar variants are noticeably absent, and the window switch surrounds are one of those details. On S, SE, and HSE trim levels, the door cards can look comparatively plain without them. These matte silver window switch surround trims are precision-formed from high-quality ABS and finished in a brushed matte silver tone that closely matches the OEM aesthetic found on top-specification Velar models. Each piece is dimensionally matched to the Velar's door panel switch cluster, sitting flush and cleanly without any visible gaps or misalignment. The result is a cabin that looks more considered, more complete — exactly as it should. The upgrade is one of the most effective interior modifications available for the Velar. The switch surrounds are a focal point every time a door is opened, and the transition from bare plastic to a refined silver accent is immediately noticeable. Whether you're preparing your Velar for sale or simply want the interior to reflect what the car should have come with from the factory, this is a fast, affordable, and reversible way to achieve it. What's Included 🪟 Front Left Surround Driver-side door switch trim, pre-cut to fit 🪟 Front Right Surround Passenger-side door switch trim, pre-cut to fit 🪟 Rear Left Surround Rear driver-side door switch trim 🪟 Rear Right Surround Rear passenger-side door switch trim 🔧 Pre-Applied 3M Adhesive Factory-grade bonding tape on each piece 📋 Fitment Instructions Step-by-step guide included in packaging Product Highlights High-grade ABS construction — durable, lightweight, and warp-resistant Matte silver finish replicates OEM top-specification Velar appearance Full four-piece set covering all four door switch clusters Pre-applied 3M-grade adhesive backing on every piece Installs in under two minutes — no tools, no drilling, no damage Dimensionally precision-cut for a flush, gap-free fit on Velar door panels Fully reversible — can be removed cleanly without marking the door card Resistant to UV fading and interior temperature fluctuations Matches existing Velar interior silver accents for a cohesive, factory look Compatible with all Velar trim levels from 2017 to 2020 model years Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017 – 2020 S Direct Fit Range Rover Velar 2017 – 2020 SE Direct Fit Range Rover Velar 2017 – 2020 HSE Direct Fit Range Rover Velar 2017 – 2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017 – 2020 First Edition / SV Autobiography Verify First Range Rover Velar 2021 – 2023 All Variants (Facelift) Not Compatible Range Rover Sport L494 2013 – 2020 All Variants Not Compatible Range Rover Evoque L538 2011 – 2018 All Variants Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Difficulty: Beginner  ·  🛠 Tools Required: None Begin with clean, dry door panels. Use an isopropyl alcohol wipe to degrease the surface around each window switch cluster — this ensures the adhesive bonds correctly and maximises long-term hold. Unpack all four trims and orient each piece correctly before removing any adhesive backing. Take a moment to dry-fit each trim over its corresponding switch cluster to confirm alignment. Peel the protective backing from the 3M adhesive on the first trim piece. Carefully position it over the switch cluster, aligning the cutouts precisely with each button before pressing down. Apply firm, even pressure across the entire surface of the trim for approximately 30 seconds. Work from the centre outward to eliminate any air pockets beneath the adhesive layer. Repeat for all four door panels. Allow 30–60 minutes before using the window switches, giving the adhesive time to fully cure at room temperature. Note: Do not apply in temperatures below 10°C — the 3M adhesive requires adequate ambient warmth to bond effectively. If fitting in a cold garage, allow the vehicle interior to warm up naturally before installation. Do not stretch or force the trim pieces — they are precision-cut and should lay flat without pressure adjustment. Elevate Every Detail of Your Velar The interior details are what you live with every day. These window switch surrounds are a small change that makes a genuine difference — and they take less time to fit than it took to read this page. Shop All Velar Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of product compatibility identification. This product is an aftermarket accessory and is not a genuine JLR part.

Victorious · Range Rover Velar · Interior Trim Carbon Fiber ABS Chrome Dashboard Trim for Range Rover Velar 2017–2018 Premium carbon fiber dash accent that transforms your Velar's interior with race-inspired styling and precision fitment. VELAR 2017–2018 Carbon Fiber ABS Direct Fit Adhesive Install ISO 9001 Certified Overview The Range Rover Velar is all about understated elegance and modern minimalism. This carbon fiber dashboard trim is engineered to enhance that design language while adding a subtle performance edge to your cabin. Finished in authentic carbon fiber with chrome accents, it's the kind of detail that catches the eye of those who truly appreciate their machine. Crafted from premium automotive-grade ABS plastic with genuine carbon fiber laminate, this trim piece fits the dashboard perfectly on 2017–2018 Velar models. At just 40 grams and engineered to OEM tolerances, it integrates seamlessly without adding weight or compromising the cabin's clean lines. Installation is straightforward—professional-grade adhesive tape on the back ensures a permanent, damage-free bond that won't lift or peel. No drilling, no modification, no guesswork. This is the kind of upgrade that feels like it came from the factory. What's Included ✓ Carbon Fiber Dashboard Trim LLK1398 model, precision-fit ✓ Pre-Applied Adhesive Tape Professional automotive-grade backing ✓ Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fiber finish with chrome trim details Premium ABS base material—lightweight and durable OEM-spec tolerances for perfect Velar fitment ISO 9001 certified manufacturing Pre-applied professional adhesive—no messy glue needed Factory-clean appearance—looks like OEM equipment Minimal weight—only 40 grams Dimensions: 20cm L × 8cm W × 3cm H Reversible installation without permanent damage Completes any Velar interior upgrade package Compatibility Vehicle Year Range Fitment Range Rover Velar 2017–2018 Direct Fit Range Rover Velar 2019–2022 Not Compatible Installation Installation Difficulty: Easy | Time: 5–10 minutes Prepare the surface. Clean the dashboard area where the trim will sit with a microfiber cloth and mild soap. Ensure the surface is completely dry and free of dust and oils. Position the trim. Carefully place the carbon fiber trim on the dashboard. Align it precisely using the factory contours as your guide. Step back and verify placement before securing. Apply adhesive. Peel back a small section of the pre-applied adhesive tape backing. Press that section firmly onto the dashboard for 10 seconds to anchor it. Secure fully. Working from the anchored end, gradually peel the backing tape away and press the entire trim into place. Use steady, even pressure across the full surface. Final press. Once fully adhered, press firmly across the entire trim for 30 seconds to ensure maximum bond strength. Allow 24 hours for the adhesive to fully cure before exposing the trim to heat or moisture. ⚠ Note: Do not attempt installation in direct sunlight or temperatures above 25°C (77°F). Cold adhesive sets faster and bonds more reliably. If you need to remove the trim later, use a heat gun on low setting to gently soften the adhesive before peeling. Complete Your Velar's Interior Carbon fiber trim is the finishing touch that separates a well-maintained Velar from a truly exceptional one. This is the kind of detail work that builds confidence in your vehicle—and in yourself as an owner who cares. Explore Velar Upgrades Use code 22GET20 for 20% off any 2 items. 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ UK support: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All product names and vehicle designations are used for fitment reference only. Modifications may affect warranty coverage—consult your vehicle documentation before installation. ```

Victorious Automotive · Range Rover Velar · Interior Trim ABS Carbon Fibre Window Switch Trims for Range Rover Velar Premium carbon fibre styling for your window controls—the upgrade found on top-spec Velar models. Velar L560 2017–2022 Carbon Fibre Finish 4-Piece Set 2-Minute Install Overview The Range Rover Velar is known for its refined, minimalist interior. These carbon fibre window switch surrounds elevate that aesthetic further—bringing the prestige of top-of-the-line specification to your cabin. Originally fitted only to higher trim levels, this upgrade is now within reach for every Velar owner who demands detail. Our ABS carbon fibre trims are engineered to match OEM fitment precisely. The pre-applied adhesive backing means installation is genuinely straightforward: clean, peel, and press. No tools, no risk, no fuss. Four pieces cover all four door windows, transforming your interior in under two minutes. Quality matters at Victorious. These aren't thin overlays—they're substantial, durable ABS with authentic carbon fibre finish that catches light exactly as it should. Your Velar will feel, and look, one step closer to concours condition. What's Included 📦 4x Window Switch Trims One pair per door, driver & passenger sides ✦ Pre-Applied Adhesive Factory-grade 3M backing—ready to install 📋 Installation Guide Step-by-step instructions included 🛡️ Victorious Guarantee 30-day money-back promise Product Highlights High-quality ABS construction with carbon fibre appearance Precise fitment for Velar 2017–2022 models Pre-applied adhesive backing—no additional tools needed Installation time: under 2 minutes per vehicle Four-piece set covers all door windows Scratch-resistant finish that ages gracefully Non-intrusive, factory-like appearance Same spec as original Range Rover equipment Worldwide shipping via DHL, FedEx, UPS, TNT Backed by Victorious Automotive 30-day guarantee Compatibility Model Years Compatibility Range Rover Velar L560 2017–2022 Direct Fit Range Rover Velar L560 2023 onwards Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Difficulty Level: Easy | Time: 2 Minutes Clean the surface: Use isopropyl alcohol or a clean microfibre cloth to remove any dust, dirt, or residue from the window switch surround areas on all four doors. Dry completely: Allow 2–3 minutes for the adhesive surface to dry fully. Moisture will reduce adhesive strength. Peel and align: Carefully peel the protective backing from the first trim. Align it precisely with the window switch surround, starting at the top edge. Press firmly: Apply steady, even pressure across the entire trim for 10–15 seconds to activate the adhesive bond. Repeat for all four doors: Follow steps 1–4 for the remaining three trims (passenger front, driver rear, passenger rear). Allow to cure: Do not touch or operate windows for 24 hours to allow adhesive to reach full strength. Note: Do not install on wet or dusty surfaces. Humidity should be below 80% for optimal adhesion. If adhesive fails to stick, contact us within 30 days for a replacement set. Ready to Upgrade Your Velar? Transform your interior with genuine carbon fibre detailing. Order your window switch trims today and experience the difference that precision engineering brings to every journey. Shop Velar Upgrades 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent, specialist retailer of aftermarket accessories for Land Rover and Range Rover vehicles. We are not affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any other OEM manufacturer. All product names and trademarks are the property of their respective owners.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Dashboard Side Trim for Range Rover Velar 2017–2020 Transform your Velar's interior with premium carbon fibre dashboard accents. Direct-fit, glue-on installation in under two minutes. Velar L560 2017–2020 Carbon Fibre ABS 2-Piece Set Pre-Applied Adhesive Overview The Range Rover Velar's dashboard vent surrounds come factory with a satin-finish plastic trim that blends into the interior. For owners seeking a more refined aesthetic, these carbon fibre replacements deliver an instant upgrade in visual presence without modification or permanent alteration. Machined from high-quality ABS polymer with authentic carbon fibre finish, this two-piece trim set installs directly over the existing dashboard vents using pre-applied adhesive tape. No tools required. No drilling. No dashboard removal. The weave detail and deep black tone create genuine visual depth, complementing both standard and HSE interior packages. Perfect as a standalone upgrade or paired with our full carbon fibre cabin suite. What's Included 📦 2x Dashboard Trim Pieces Left and right vent surrounds, pre-fitted 🧴 Pre-Applied Adhesive Tape 3M automotive-grade mounting tape 📋 Installation Guide Visual step-by-step with measurements 🛡️ 30-Day Money-Back Guarantee Victorious peace of mind protection Product Highlights Authentic carbon fibre finish with visible weave detail Premium ABS polymer construction — lightweight and rigid Two-piece set covers both dashboard vent surrounds Installation in under 2 minutes with pre-applied 3M tape No tools, drilling, or permanent modification required Factory-aligned fitment — no gaps or overhang Heat-resistant and UV-stable for long-term durability Compatible with all interior trim colours and packages Complements OEM carbon fibre and gloss black cabin trims Covered by Victorious 30-day returns guarantee Compatibility Vehicle Model Year Range Compatibility Range Rover Velar L560 2017–2020 Direct Fit Range Rover Velar L560 2020–2024 Not Compatible Range Rover Sport L494 2014–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes Difficulty Level: Beginner | Time: 2 Minutes Locate the two dashboard vent surrounds on either side of the steering wheel and central infotainment screen. Clean both surfaces with the provided alcohol wipe. Allow to dry completely (approximately 30 seconds). Carefully peel back the protective backing from the adhesive tape on the first trim piece. Align the piece with the vent surround opening, starting at the top corner. Press down firmly across the entire surface for 10 seconds. Repeat for the second piece on the opposite side of the dashboard. Allow adhesive to set for 24 hours before touching or adjusting (optional but recommended for maximum bond strength). Important: Do not apply the trim pieces in ambient temperatures below 10°C or above 35°C. Ensure all surfaces are free of dust, fingerprints, and moisture before installation. Ready to Refine Your Velar? Add authentic carbon fibre character to your dashboard in under two minutes. No cutting, no drilling, no permanent changes. Just premium interior detailing that makes a lasting impression. Shop Velar Upgrades Use code 22GET20 for 20% off when you order 2 or more items. ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or the Jaguar Land Rover group of companies. All vehicle names and model designations remain the property of their respective manufacturers. Product specifications and compatibility are subject to change without notice.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Hand Brake Cover for Range Rover Velar 2017–2020 Upgrade your parking brake surround to premium carbon TPU with SVR-spec aesthetics and clip-on installation. L560 Platform 2017–2020 Carbon TPU Clip-On SVR Look Overview The Range Rover Velar L560 is celebrated for its minimalist, driver-focused interior and precision engineering. Subtle details matter tremendously on a vehicle this refined, which is why the hand brake surround deserves the same calibre of finish as the rest of your cabin. This carbon fibre hand brake cover transforms the standard climate control surround into a striking focal point. Precision-laser-cut to integrate seamlessly with your Velar's existing geometry, it clips directly over the factory piece without adhesives, fasteners, or modification. The result is a premium, integrated appearance that echoes the bold aesthetic found on SVR performance models. Manufactured from high-quality carbon TPU—a composite material that combines authentic carbon fibre weave with durable thermoplastic backing—this cover resists fingerprints, UV damage, and daily wear while maintaining a lustrous, professional finish. Installation takes minutes and requires no special tools or technical knowledge. What's Included 🎯 Carbon TPU Cover Precision-cut hand brake surround 📋 Installation Guide Step-by-step with images ✓ Fit Guarantee Perfect alignment or money back Key Features Authentic carbon fibre weave with TPU backing Laser-cut for precise factory-fit alignment Clip-on design—no adhesive, glue, or screws Resistant to fingerprints and UV fading SVR-inspired aesthetic for stock Velar cabins Durable thermoplastic composite material Reversible installation if needed Complements all interior trim packages Professional finish in under 5 minutes Part of Victorious Carbon Interior Packages Compatibility Model & Year Engine Compatibility Range Rover Velar P250 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P300 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P400 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar D240 (2017–2020) 2.0L Diesel Direct Fit Range Rover Velar D300 (2017–2020) 3.0L Diesel Direct Fit Range Rover Velar SVR (2017–2020) 5.0L Supercharged Direct Fit Range Rover Velar 2021–Present All Engines Not Compatible Installation Guide Prepare: Ensure the hand brake surround and surrounding trim are clean and dry. No pre-treatment needed. Inspect Fit: Carefully position the carbon cover over the factory climate surround. Align clip points on all edges. Clip Engagement: Press firmly and evenly around all four sides until clips engage fully. You'll hear or feel a soft click. Verify Security: Gently pull on the cover to confirm it's firmly seated. Check that all edges are flush with surrounding trim. Final Check: Operate your hand brake lever to ensure full clearance and smooth motion. Adjust if necessary. Note: If your Velar has bespoke interior trim or non-standard dash finishes, test-fit the cover before finalising installation. The cover is reversible and will not damage factory components. Ready to Upgrade Your Velar? Transform your cabin with SVR-spec carbon fibre detailing. This hand brake cover is part of our comprehensive Carbon Interior Packages—designed to elevate every surface that matters. Shop Range Rover Velar Parts Save 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 – 12,300+ Reviews ✓ 30-Day Money Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS 📞 Expert Support Mon–Fri 9am–7pm GMT Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Installation of aftermarket parts may void manufacturer warranty in some cases—please verify with your Land Rover dealer before proceeding.