Automotive

Victorious Automotive · Land Rover Discovery & Range Rover · Interior Trim Red Decorative Steering Wheel Button Frame — Land Rover Vogue, Sport, Discovery & Evoque (2017–2020) A precision laser-cut interior accent that brings a bold, personalised touch to your steering wheel — crafted specifically for Land Rover and Range Rover models from 2017 to 2020. Discovery 5 Range Rover Vogue L405 Range Rover Sport L494 Evoque L538 Velar 2017–2020 Steering Wheel Trim Red Finish Laser-Cut No-Drill Install Interior Accent Overview The Range Rover Vogue, Sport, Discovery 5, Evoque, and Velar represent some of the most refined interiors in the SUV segment — but for owners who want their cabin to feel truly their own, the factory finish only goes so far. The steering wheel, one of the most tactile surfaces in the vehicle, is one of the first places where a considered upgrade makes an immediate impression. These Red Steering Wheel Button Decorative Frames are engineered to sit flush over the existing button surrounds on your steering wheel, transforming the look of the controls with a sharp, colour-forward accent. Each frame is precisely laser-cut to ensure a factory-close fit — no gaps, no movement, no compromised aesthetics. The red finish adds a sporting character without feeling aftermarket or out of place against the premium trim levels these vehicles are known for. Compatible across a broad range of Land Rover and Range Rover models between 2017 and 2020, these frames install in minutes using adhesive backing — no tools, no drilling, no risk to your interior. Whether you're personalising a daily driver or finishing off a full interior refresh, this is one of the easiest, most impactful upgrades available for your steering wheel. What's Included 🔴 Steering Wheel Button Frames Full set of red decorative surrounds for steering wheel buttons 🔧 Pre-Applied Adhesive Clean adhesive backing for straightforward, tool-free fitting 📋 Fitting Guide Step-by-step installation instructions included Product Highlights Precision laser-cut for exact button surround alignment Bold red finish adds a sporty, personalised cabin accent Tool-free installation — fits in under 15 minutes Pre-applied adhesive backing for secure, clean fitment Designed specifically for 2017–2020 Land Rover steering wheel profiles Does not interfere with button function or tactile feedback Durable, high-quality material resists fading and daily wear Removable without damage to the original steering wheel surface Compatible across five distinct Land Rover and Range Rover nameplates Available in additional colour options — check our other listings Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Evoque L538 2020 Direct Fit Land Rover Discovery 5 L462 2019–2020 Direct Fit Land Rover Discovery Sport L550 2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure your steering wheel surface is clean and completely free of dust, grease, and moisture. Use an isopropyl alcohol wipe for best adhesion results. Lay out the full set of frames and identify each piece against the corresponding button surround on your steering wheel. Peel the protective backing from the adhesive on the first frame, taking care not to touch the adhesive surface. Carefully align the frame over the corresponding button surround, pressing gently into position before applying firm pressure for 20–30 seconds. Repeat for all remaining frames, working methodically across the wheel. Leave undisturbed for a minimum of 30 minutes to allow the adhesive to fully bond before driving. Important: Verify your exact model year and steering wheel specification before fitting. Steering wheel button layouts can vary between facelift and pre-facelift builds within the same model year. If in any doubt, contact us on +44 203 943 9919 before ordering. Complete Your Interior Browse the full range of interior accessories for your Land Rover or Range Rover — from dashboard trims and gear surrounds to ventilation accents and door handle covers. Shop Discovery 5 Accessories Shop Range Rover Vogue L405 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for fitment identification and compatibility purposes. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Land Rover Discovery · Interior Trim Rose Gold Steering Wheel Button Decorative Frame — Land Rover Vogue, Sport, Discovery & Evoque 2017–2020 A precision-cut rose gold trim frame that transforms your steering wheel controls into a polished, luxury focal point — no tools, no hassle, no compromise. Discovery 5 (2017–2020) Range Rover Sport L494 Range Rover Vogue L405 Evoque L538 Rose Gold Finish Peel & Stick Laser Cut No Drilling Required Interior Trim 2017–2020 Overview The Land Rover Discovery 5, Range Rover Sport L494, Range Rover Vogue L405, and Range Rover Evoque L538 all share a refined interior philosophy — one where every surface, every detail, is expected to meet a high standard. The steering wheel, in particular, is the most tactile point of contact between driver and vehicle, and its button surrounds are among the most frequently noticed details in the cabin. This Rose Gold Steering Wheel Button Decorative Frame is designed to complement that philosophy precisely. Crafted with a premium rose gold finish and cut to exact tolerances using laser technology, each frame sits flush against the steering wheel button housing — eliminating the factory plain-plastic look and replacing it with something that genuinely looks like it belongs in a higher specification trim level. The application method is intentional: a high-strength peel-and-stick backing bonds cleanly to the existing surface without requiring removal of steering wheel components, adhesives, or specialist tools. The result is a lasting, rattle-free upgrade that looks factory-fitted from day one. What's Included 🔲 Decorative Frame × 2 Matching rose gold button surround frames for left and right steering wheel control clusters 📋 Pre-Applied Adhesive Backing High-bond 3M-style tape pre-fitted to each frame for immediate application 🧼 Cleaning Preparation Wipe Surface prep wipe included to ensure maximum adhesion on installation 📄 Installation Guide Step-by-step instruction sheet included in the package Product Highlights Precision laser-cut to match OEM steering wheel button housing dimensions exactly Premium rose gold finish — sophisticated, warm, and distinct from standard chrome trims Tool-free peel-and-stick installation — no disassembly of steering wheel required High-strength adhesive backing provides a permanent, rattle-free bond Compatible across four Land Rover and Range Rover model lines (2017–2020) Does not obscure, interfere with, or impede any steering wheel button function Resistant to UV fading and the temperature fluctuations typical of vehicle interiors Available in multiple colour options — rose gold, silver, carbon and gloss black variants Low-profile fit sits flush with surrounding trim for a factory-finished appearance Reversible upgrade — frames can be removed cleanly without damage to OEM surfaces Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Range Rover Vogue L405 2017–2020 Direct Fit Range Rover Sport L494 2017–2020 Direct Fit Range Rover Evoque L538 2017–2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 (2019+) 2019–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 3 / 4 L319 / L319 Pre-2017 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Easy — No Tools Required Park your vehicle and ensure the steering wheel is in a neutral, centred position with the engine off. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight. Use the included preparation wipe to thoroughly clean the surface of the steering wheel button housing. Remove any dust, oils, or residue and allow the surface to dry completely before proceeding. Test-fit both decorative frames against the button housings without removing the adhesive backing — confirm alignment, orientation, and that all button cutouts line up correctly. Peel the protective film from the adhesive backing on the first frame. Carefully align the frame over the button housing, starting from one edge and pressing firmly into place to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of the frame for 30–60 seconds to activate the adhesive bond. Repeat for the second frame on the opposite side. Allow the adhesive to cure for a minimum of 2 hours before regular use. Avoid operating the steering wheel controls forcefully during this initial cure period. ⚠ Please Note: Verify your specific vehicle's steering wheel button housing design before purchasing. While this frame is compatible with the 2017–2020 model years listed, minor manufacturing variations can occasionally exist across production runs and regional markets. If in doubt, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Elevate Every Drive At Victorious Automotive, every product we carry is chosen because it genuinely enhances the ownership experience of a Land Rover or Range Rover. This rose gold steering wheel frame is one of those rare upgrades — small in scale, significant in impact. Browse our full Discovery 5 and Range Rover collections to find everything your vehicle deserves. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

```html Mini · R56 · Roof Vinyl Checker Union Jack Roof Vinyl for Mini Cooper R56 Iconic laser-cut vinyl roof upgrade with pre-applied adhesive for effortless installation and signature British heritage styling. R56 2006–2014 High-Quality Vinyl Laser-Cut Pre-Applied Adhesive Overview The Mini Cooper R56 is a cult classic, celebrated for its fun-to-drive character and iconic British DNA. This Checker Union Jack Roof Vinyl is engineered to amplify that heritage aesthetic while delivering lasting durability and straightforward fitment. Our laser-cut vinyl is engineered to conform perfectly to your R56's roof contours. High-grade adhesive backing ensures a permanent bond without damage to paintwork, while the pre-applied formula eliminates mess and guesswork during installation. Whether you're restoring period-correct Mini character or adding contemporary flair, this roof vinyl represents a flagship design statement—bold, recognisable, and unmistakably British. What's Included 🎨 Checker Union Jack Roof Vinyl Laser-cut, pre-applied adhesive 📋 Installation Guide Step-by-step photo instructions 🛡️ 30-Day Guarantee Full money-back promise Why Choose This Roof Vinyl Laser-cut for flawless fitment—no trimming required High-quality vinyl resists UV fading and weathering Pre-applied adhesive ensures consistent bond Removable without damage to original paint Iconic Checker Union Jack design—instantly recognisable DIY-friendly installation in under 30 minutes Works exclusively with R56 models (2006–2014) Premium alternative to generic roof decals Complements factory Mini styling Made to flagship design standards Compatibility Mini Model Generation Years Fitment Cooper R56 2nd Gen (Hatchback) 2006–2014 Direct Fit Cooper S R56 2nd Gen (Hatchback) 2006–2014 Direct Fit Cooper JCW R56 2nd Gen (Hatchback) 2006–2014 Direct Fit Countryman R60 1st Gen (Crossover) 2010–2017 Not Compatible Cooper R50 1st Gen (Hatchback) 2001–2006 Not Compatible Clubman R55 2nd Gen (Estate) 2007–2015 Not Compatible Installation Notes Difficulty Level: Easy | Time: 20–30 minutes Prepare the roof: Clean thoroughly with mild soap and water. Dry completely with a microfibre cloth. Allow 1 hour drying time in a warm garage. Position the vinyl: Lay the vinyl on the roof without applying pressure. Align the design centrally, accounting for roof slope. Apply from centre outward: Starting at the roof's peak, use a squeegee or card to press the vinyl firmly, working toward the edges. Use slow, deliberate pressure. Smooth out air bubbles: If small bubbles appear, use the squeegee to gently push them toward the nearest edge. Trim excess (if needed): Using a sharp craft knife, carefully trim any overhanging vinyl along the roof edges. Work slowly to avoid cutting the paint. Final check: Run your hand over the entire surface to confirm adhesion. Allow 24 hours of cure time before washing. Important: Install in warm conditions (15–25°C). Cold weather reduces adhesive activation. Do not wash the vehicle for 48 hours after installation. If removal is necessary, gently heat the vinyl with a hair dryer and peel slowly to avoid paint damage. Ready to Transform Your R56? Add British iconic style to your Mini Cooper with this laser-cut, flagship Checker Union Jack Roof Vinyl. Pre-applied adhesive means no hassle—just perfect fitment and lasting character. Shop Now Use code 22GET20 for 20% off when buying 2 or more items. 4.9/5 · 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mini Cooper, BMW Group, or any official Mini brand entity. All product names, logos, and trademarks remain the property of their respective owners. This product is designed as an aftermarket accessory and is sold independently. Mini and Union Jack are registered trademarks used for identification purposes only. ```

Victorious Automotive · BMW · Interior Styling BMW M-Sport Steering Wheel Trim – Silver ABS – 2019–2023 Precision-fit steering wheel accent that elevates your interior with understated M-Sport elegance and premium durability. 2019–2023 M-Sport ABS Plastic Silver Finish Interior Trim Adhesive Install Overview If you drive a 2019–2023 BMW and want a quick, visible upgrade to your steering wheel surround, this silver M-Sport trim delivers understated refinement. The steering wheel is one of your hands' primary contact point with the car—it deserves intentional styling. This trim is engineered from high-quality ABS plastic, finished in a rich silver tone that complements both modern and classic BMW interiors. The trim is precision-cut to fit snugly around the steering wheel, creating a factory-spec appearance without any gaps or misalignment. Installation is straightforward: clean the mounting surface, apply the automotive-grade adhesive tape, and secure in place. Backed by ISO9001 certification, this piece combines aesthetic impact with proven durability. It resists UV degradation, maintains its finish under sunlight, and won't crack or warp with temperature changes. A subtle detail that transforms how your cockpit feels every time you get behind the wheel. What's Included ✦ Steering Wheel Trim Silver ABS plastic, pre-cut for precision fitment ⚙ Automotive Adhesive Tape High-tack bonding strip for secure, permanent installation 📋 Installation Guide Step-by-step instructions with prep and application notes Product Highlights Precision fitment for 2019–2023 BMW models—no trimming or modification needed High-quality ABS plastic with silver finish—durable, UV-resistant, scratch-resistant ISO9001 certified manufacturing—meets strict quality and material standards Simple adhesive installation—no tools, drilling, or professional labor required M-Sport aesthetic—subtle, aggressive detailing that enhances cockpit presence Lightweight design—adds visual impact without affecting steering feel or weight distribution Maintains factory appearance—seamless integration with OEM interior design language Temperature stable—won't warp, crack, or peel in extreme heat or cold Three colour options available—Silver, Red, and Carbon Fiber to match your style Easy removal—adhesive is strong but can be gently peeled away without damage to steering wheel Compatibility BMW Model Year Range Status 2-Series (F22, F23) 2019–2023 Direct Fit 3-Series (G20, G21) 2019–2023 Direct Fit 4-Series (G22, G23) 2020–2023 Direct Fit 5-Series (G30, G31) 2017–2023 Direct Fit M440i, M440i xDrive 2021–2023 Direct Fit M440i M-Sport Package 2021–2023 Direct Fit X3 (G01) 2018–2023 Not Compatible X5 (G05) 2019–2023 Not Compatible Note: Please verify your steering wheel design against product images before purchase. Some M-Sport models may require minor fitment adjustment. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure about compatibility. Installation Difficulty: Easy | Time: 15–20 Minutes Prepare the surface. Clean the steering wheel trim area thoroughly with a lint-free cloth and isopropyl alcohol. Allow to dry completely for at least 5 minutes. Position the trim. Carefully align the silver ABS trim against the steering wheel. Check alignment from multiple angles before committing adhesive. Apply adhesive tape. Remove the backing from the supplied automotive adhesive tape. Press firmly along the entire length of the trim, working from centre outward to eliminate air bubbles. Set and cure. Apply moderate pressure for 30 seconds. Allow adhesive to cure for 24 hours before using the steering wheel. Avoid washing or touching the trim during this period. Final inspection. Once cured, verify that the trim is fully bonded with no gaps, lifting, or movement when gently flexed. ⚠ Important: Do not install this trim on a warm steering wheel. Allow your vehicle interior to cool to room temperature first. The adhesive bonds best on cool, clean surfaces and will weaken if applied in direct sunlight or excessive heat. Specifications Property Value Material ABS Plastic (High-Impact) Finish Silver Metallic Length 30 cm Height 10 cm Width 15 cm Weight 200 g Type Interior Moulding / Trim Installation Method Automotive Adhesive Tape (Included) Certification ISO9001 Warranty 30-Day Money-Back Guarantee Ready to Refine Your Cockpit? This silver M-Sport steering wheel trim is a small detail with outsized visual impact. It's the kind of upgrade that makes you smile every time you grip the wheel, and it's engineered to last the life of your vehicle. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 📦 Worldwide Shipping – DHL, FedEx, UPS, TNT ↩ 30-Day Guarantee – Full Money Back ☎ +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with BMW, BMW M, Land Rover, Range Rover, Jaguar Land Rover (JLR), or any other vehicle manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for fitment only and does not imply endorsement, sponsorship, or authorisation by any manufacturer.

Victorious · BMW · Interior Trim Red ABS Plastic Steering Wheel Trim for BMW M-Sport 2018–2020 Precision-engineered interior upgrade that combines factory-fit accuracy with vibrant aesthetic refinement for your M-Sport steering wheel. F87 M2 · F80 M3 · F82 M4 2018–2020 ABS Plastic Easy Installation Red/Silver/Carbon Overview BMW M-Sport models demand finishes that match their precision engineering and aggressive aesthetic. This red ABS plastic steering wheel trim delivers exactly that—a boutique interior accent that elevates the cabin without requiring extensive modification. Manufactured from premium-grade ABS plastic with a durable textured finish, this trim sits perfectly on the steering wheel's upper spoke section. Its contours are mapped directly to the 2018–2020 M-Sport platform, ensuring seamless integration with zero gaps or misalignment. The red finish complements carbon fiber trim, brushed aluminum, and factory leather beautifully. Installation takes under 15 minutes using the included automotive adhesive tape. No tools, heat, or fasteners needed. The finish is resistant to UV degradation and daily wear, maintaining its appearance through seasons of commuting and spirited driving. What's Included 🎨 Steering Wheel Trim Red ABS plastic, precision-molded 🔌 Adhesive Tape Automotive-grade dual-sided 📋 Installation Guide Step-by-step with tips Product Highlights Precision-engineered for perfect factory-fit alignment Premium ABS plastic with textured finish UV-resistant and fade-proof color Quick adhesive installation—no drilling or clips Designed exclusively for M-Sport models 2018–2020 Available in red, silver, and carbon fiber variants Seamless integration with OEM interior trim Durable enough for daily commuting and spirited driving Removable without permanent damage to wheel Enhances cabin personalization and visual impact Compatibility BMW Model Year Compatibility M2 (F87) 2018–2020 Direct Fit M3 (F80) 2018–2020 Direct Fit M4 (F82) 2018–2020 Direct Fit M340i / M440i 2019–2020 Direct Fit Pre-2018 M-Sport 2013–2017 Not Compatible Non-M Models Any Year Not Compatible Installation Difficulty Level: Beginner | Time: 10–15 minutes Prepare the wheel: Clean the steering wheel's upper spoke section thoroughly with a microfiber cloth and mild soap. Allow to dry completely. Remove adhesive backing: Carefully peel away the protective film from one side of the included adhesive tape, exposing the sticky surface. Apply tape to trim: Press the adhesive tape firmly onto the back of the red steering wheel trim, ensuring full contact across all edges. Position on wheel: Align the trim with the steering wheel's upper spoke. Start from the center and press outward to eliminate air bubbles. Secure and cure: Apply gentle pressure for 30 seconds, then allow adhesive to cure for 2–4 hours before driving. Final inspection: Verify all edges are flush and no gaps exist between trim and wheel surface. Note: Ensure the wheel surface is completely dry before applying adhesive. Moisture will compromise bond strength. If removing the trim later, use isopropyl alcohol to dissolve residual adhesive gently. Ready to Elevate Your M-Sport Interior? This red steering wheel trim transforms your cabin into a more personalized, visually cohesive space. Pair it with other M-Sport accents for a complete interior refresh. Shop Red Steering Wheel Trim Use code 22GET20 for 20% off when you order 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL shipping 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW subsidiary. All product names and references are used for compatibility identification only. Modifications made to your vehicle may void manufacturer warranty. Always consult your BMW dealer before installing aftermarket components.

Victorious Automotive · Mercedes G Class · Exterior Trim Glossy Black Rear Side Air Vent Trim for Mercedes Benz G Class Premium ABS vent trim that adds refined detail and aggressive character to your G-Class exterior. G Class ABS Material Glossy Black Carbon Fiber Option Adhesive Installation Overview The Mercedes-Benz G Class demands refinement at every angle. These Glossy Black Rear Side Air Vent Trims are engineered to enhance your G-Class's aggressive stance while adding a touch of premium detailing that catches the eye. Crafted from ISO9001-certified ABS plastic, these trims replace the standard vent surrounds with sleek, contemporary styling available in rich glossy black or dynamic carbon fiber finishes. Each pair is precision-fitted to match your vehicle's body contours and designed for hassle-free installation using supplied automotive-grade adhesive tape. Whether you're refining your G-Class for the road or completing a subtle exterior upgrade, these trims deliver understated luxury with zero compromise on durability or fitment quality. What's Included ✦ 1 Pair of Rear Side Air Vent Trims Left and right, precision-fitted ✦ Automotive Adhesive Tape Pre-applied for secure bonding ✦ Installation Guide Step-by-step surface prep and fitment ✦ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights ISO9001-certified ABS construction for durability Available in glossy black and carbon fiber finishes Custom-fit design for select G Class model years Pre-applied automotive adhesive for secure bonding Lightweight at just 200g per pair Refined aesthetics that complement OEM styling Resistant to UV fade and weathering No drilling or permanent modifications required Easy removal without surface damage Paired with expert installation support Compatibility Model Year Range Variant Fitment 2019–2024 G Class (W464) Direct Fit 2015–2018 G Class (W463A) Direct Fit 2000–2014 G Class (W463) Not Compatible 2024+ G Class (New Generation) Not Compatible Note: Please verify your vehicle's year and generation before ordering. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to confirm exact fitment. Installation ⏱ Difficulty: Beginner | Time: 15–20 minutes Prepare the surface: Clean the rear side air vent area thoroughly with a microfiber cloth and isopropyl alcohol. Ensure the surface is completely dry. Inspect fitment: Dry-fit each trim to confirm alignment and sizing. Do not apply adhesive tape yet. Position the trim: Carefully align the left trim to the rear side vent. Check all edges for flush contact with the vehicle body. Apply adhesive: Peel back the protective backing from the adhesive tape and press firmly onto the vent area, working from the center outward to avoid air bubbles. Repeat on right side: Follow steps 3–4 for the right rear side vent trim. Allow curing time: Do not disturb the vehicle for at least 24 hours to allow full adhesive bond. ⚠ Installation is permanent. Please confirm fitment before applying adhesive. If unsure, contact our team for guidance. Why Victorious? We've been the trusted source for premium Mercedes G Class and Land Rover accessories since day one. Every product in our collection is tested for fitment, durability, and finish quality. With over 12,300 verified 4.9-star reviews, our customers know we stand behind every upgrade. Ready to Elevate Your G Class? Add these refined rear side vent trims to your Mercedes and experience the difference that premium detailing makes. Fast worldwide shipping, expert support, and a 30-day money-back guarantee. Shop G Class Accessories Use code 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 · 12,300+ Reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent accessory retailer and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility is provided in good faith; please verify fitment before purchase.

Victorious · Mercedes G-Class · Exterior Trim Rear Bumper Trim for Mercedes-Benz G-Class W463 Premium carbon fibre and black trim options that elevate your G Wagon's rear bumper with sophisticated, purpose-built detailing. W463 G-Wagon ABS Material Carbon Fibre Option Direct Fit Tool-Free Install Overview The Mercedes-Benz G-Class W463 commands respect on every terrain. Its iconic silhouette deserves equally iconic detailing. These rear bumper trims are engineered to enhance that commanding presence, adding precision-crafted edges and refined finishes that complement the G Wagon's unmistakable geometry. Each trim is machined from high-quality ABS thermoplastic and finished in either deep gloss black or premium carbon fibre weave. They're designed for direct fitment to the W463 rear bumper, requiring no drilling, cutting, or permanent modifications—just clean, confident installation that respects your vehicle's integrity. Whether you're upgrading for aesthetics or adding a functional accent that catches light and shadow, these trims deliver the refinement G-Class owners expect from their investment. What's Included 🎨 2 x Rear Bumper Trims Left and right pair for complete coverage 📖 Installation Manual Step-by-step guide with torque specs 🔒 Grade-A Fasteners Stainless hardware included ✓ Fitment Guarantee 30 days to confirm perfect fit Product Highlights Premium ABS construction with UV-resistant finishes Two luxury finishes: gloss black or carbon fibre weave Direct-fit design—no cutting or modifications required Seamless integration with factory bumper geometry Durable, impact-resistant thermoplastic materials Weather-sealed for year-round protection Lightweight design—no performance impact Easy tool-free installation (10–15 minutes) Stainless fasteners prevent corrosion Maintains factory warranty compliance Compatibility Model Generation Years Fitment Mercedes-Benz G-Class W463 (Classic/Facelift) 2004–2018 Direct Fit Mercedes-AMG G63 W463 2004–2018 Direct Fit Mercedes-AMG G65 W463 2004–2018 Direct Fit Mercedes-Benz G-Class W464 (New Generation) 2018+ Verify Fitment Note: Confirm your model year and W463 designation before purchase. W464 fitment requires separate verification. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) for compatibility confirmation. Installation Difficulty Level: Easy | Time: 10–15 Minutes Prepare. Clean the rear bumper surface with mild soap and water. Dry completely and allow 15 minutes for full cure. Position. Align the left trim against the bumper edge. Start fasteners by hand to ensure flush contact. Secure. Tighten fasteners in a cross pattern using the provided hex key. Do not over-tighten (recommended torque: 1.5–2.0 Nm). Repeat. Install the right trim following the same process. Inspect. Check both trims for gaps or misalignment. Adjust fasteners if needed. Final Check. Step back and confirm even panel gaps and symmetrical fitment. Professional Installation Recommended: While straightforward for experienced DIY enthusiasts, we recommend professional fitment to ensure perfect alignment and preserve your warranty. Contact a local Mercedes specialist. Complete Your G-Class Vision These rear bumper trims are the finishing detail your G Wagon deserves. Engineered for precision, built for durability, backed by a 30-day money-back guarantee. Shop G-Class Collection Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars ✓ 12,300+ Verified Reviews 🌍 Worldwide DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz, AMG, or Daimler AG. All product names and logos are registered trademarks of their respective manufacturers. This product is designed for aftermarket customisation and does not void manufacturer warranty when installed correctly.

BMW · Compact Sport · Exterior Styling BMW M4 Style Black Wing Mirrors – 2014–2020 Models OEM-inspired M4 aesthetics with aggressive black finish and secure factory fit for modern BMW performance cars. 2014–2020 M4 Style ABS Material Glossy Black Direct Fit Protection Overview These M4 Style Wing Mirror covers transform the front fascia of your 2014–2020 BMW with the aggressive aesthetic of the M4, bringing motorsport-inspired design to your daily driver. Engineered in durable ABS plastic, they replace worn or damaged mirror covers while delivering the premium gloss black finish BMW enthusiasts demand. Designed for seamless integration across 1 Series, 2 Series, 3 Series, 4 Series, X1, and M2 platforms, these mirrors bolt directly in place with zero modification. The semi-gloss finish catches light beautifully and resists UV degradation, ensuring your investment looks sharp season after season. Whether you're refreshing tired trim or building a cohesive M-package aesthetic, these covers deliver the visual impact and durability that separates serious builds from off-the-shelf upgrades. What's Included 🪞 Left & Right Mirror Covers Pair of M4 style covers, ready to fit 🔧 Installation Hardware All mounting clips and fasteners included 📋 Fitment Guide Vehicle-specific compatibility reference Product Highlights Premium ABS material resists impact and UV fade Glossy black finish matches M-spec interiors and aerodynamic kits Direct OEM replacement—no drilling or trimming needed Protects original mirror housings from road debris and scratches Lightweight design adds zero unsprung weight Secure clip retention won't rattle or shift during spirited driving Easy 15-minute swap—no special tools required Maintains factory mirror function and safety features intact Available in Bright Black and Sub Black finishes Perfect for M-package builds and sport-spec aesthetics Compatibility Matrix Model Generation Year Range Fitment 1 Series Hatchback F20 / F21 2012–2016 Direct Fit 2 Series Coupe F22 / F23 2014–on Direct Fit 3 Series Sedan & Touring F30 / F31 2012–on Direct Fit 4 Series Coupe, Cabriolet & Gran Coupe F32 / F33 / F36 2014–on Direct Fit X1 SAV E84 2013–2015 Direct Fit M2 Coupé F87 2014–on Direct Fit M3 Sedan F80 2014–on Not Compatible M4 Coupe & Cabriolet F82 / F83 2014–on Not Compatible Compatibility Check: M4 and M3 models feature integrated mirror design and are not compatible with these covers. Confirm your vehicle code (VIN decoder or Vin.Decoder.com) before purchase. Installation Guide Difficulty Level: Beginner | Time: 15–20 minutes per side Park on level ground and engage handbrake. Open driver's door fully. Locate the three retention clips on the underside and inner edge of the factory mirror cover. Gently pry the factory cover away from the mirror housing using a soft plastic trim tool or spoon. Work from the top down to avoid cracking the plastic. Disconnect any wiring harness for mirror heating or puddle lights (if equipped). Set factory cover aside for storage or resale. Position the M4 style cover over the mirror housing and press down firmly until all three clips engage with an audible click. Reconnect any disconnected wiring, ensuring connectors are seated fully. Repeat steps 1–6 for the passenger-side mirror. Step back and inspect both covers for alignment and gloss finish consistency. Note: Light variations in gloss depth and colour tone between manufacturing batches are normal and expected. Measurement tolerance: ±1–3 cm. Do not force clips; reposition cover if resistance is felt. Why Choose Victorious We've been fitting BMW owners with premium exterior styling since 2015. Every M4 style mirror cover is physically inspected for finish quality, clip strength, and fitment accuracy before dispatch. Our 4.9★ rating across 12,300+ verified reviews reflects our commitment to the BMW community. When you order from Victorious, you're backing yourself with a 30-day money-back guarantee, worldwide shipping via DHL / FedEx / UPS / TNT, and direct support from enthusiasts who drive what we sell. Ready to Add M4 Aggression to Your BMW? Upgrade your mirrors today and experience the visual impact of OEM M-spec styling. Our direct-fit covers ship next business day and come with our full satisfaction guarantee. Shop M4 Style Mirrors Use code 22GET20 for 20% off any 2 items in your cart. ✓ 30-day returns – no questions asked ✓ Worldwide shipping – 3–7 days typical ✓ 4.9★ reviews – 12,300+ verified owners ✓ Expert support – +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names, logos, and brands referenced are the property of their respective holders and used for descriptive and compatibility purposes only. These are aftermarket accessories designed to fit OEM specifications and are not original equipment manufactured by BMW.

Victorious · Tesla Model 3 · Interior Lighting Color Reading Lighting Strip for Tesla Model 3 Premium ambient reading light upgrade with carbon fiber trim—sophisticated interior enhancement for discerning EV owners. T3 2016–2019 Carbon Fiber Ambient Lighting Peel & Stick Overview The Tesla Model 3 deserves an interior that matches its sophistication. This Color Reading Lighting Strip combines elegant ambient lighting with authentic carbon fiber trim, transforming your cabin ambiance with minimal effort and maximum visual impact. Crafted from genuine carbon fiber, this upgrade delivers a premium aesthetic that elevates the entire interior environment. The soft, color-adjustable reading light provides functional illumination for nighttime driving while maintaining the sleek, modern character your Model 3 already possesses. Installation is straightforward via precision-cut double-sided tape—no drilling, cutting, or permanent modification required. Proper alignment during install ensures a seamless, factory-finished appearance that looks as though it was engineered in-house from day one. What's Included 💡 Lighting Strip Premium color-adjustable reading light 🔧 Double-Sided Tape Pre-cut for precise, damage-free fitting Product Highlights Genuine carbon fiber construction for authentic premium appearance Color-adjustable ambient light for personalized cabin mood Peel-and-stick installation—no tools or drilling required Direct fit for 2016–2019 Tesla Model 3 interior Enhances nighttime driving visibility and safety Factory-finished appearance when properly aligned Durable, long-lasting materials resist fading and damage Complements OEM interior design language seamlessly Improves cabin atmosphere for passengers and driver Simple, reversible upgrade with no permanent modifications Compatibility Vehicle Model Years Fit Status Tesla Model 3 2016–2019 Direct Fit Tesla Model 3 2020+ Not Compatible Tesla Model Y All years Not Compatible Tesla Model S All years Not Compatible Installation 📋 Installation Guide Difficulty: Beginner · Time: 10–15 minutes Power off your Tesla Model 3 and open the driver's door to access the reading light area above the driver's seat. Gently clean the mounting surface with a soft, lint-free cloth to remove dust and ensure optimal tape adhesion. Carefully peel the backing from the double-sided tape strips and position the carbon fiber lighting strip with precise alignment. Press firmly and evenly across the entire length of the strip, working from the center outward to avoid air bubbles. Allow the adhesive 24 hours to cure fully before using the reading light or adjusting its position. Test the lighting function through your vehicle's infotainment system and adjust color settings as desired. ⚠ Note: Ensure the mounting surface is clean and dry before application. Improper alignment during install may require complete removal and re-installation. Allow full adhesive cure time before operating the light. Ready to Elevate Your Model 3? Transform your cabin with premium ambient lighting that works as hard as it looks. This carbon fiber reading strip delivers genuine upgrade character in minutes, with no permanent modifications or technical expertise required. Shop Now Apply code 22GET20 for 20% off when you purchase any 2 items. 30-Day Money-Back Guarantee 4.9★ 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla, Inc. or any of its subsidiaries. Tesla is a registered trademark of Tesla, Inc. All references to Tesla vehicles are made solely for compatibility and identification purposes. Product design, engineering, and support are provided independently by Victorious Automotive.

Tesla · Model 3 · Interior Trim Matte Carbon Indicator & Wiper Stalks for Tesla Model 3 Elevate your cockpit with premium carbon fiber stalks engineered for seamless OEM fit and modern aesthetic appeal. T3 2016–2019 Real Carbon Fiber Matte Finish Direct Fit Overview The Tesla Model 3 (2016–2019) deserves interior details that match its forward-thinking design language. These Matte Carbon Indicator and Wiper Stalks replace the standard plastic trim with authentic carbon fiber, delivering a premium tactile and visual upgrade that transforms your driving environment at every glance. Machined from genuine carbon fiber and finished in a refined matte texture, these stalks strike the balance between aggressive styling and understated elegance. They're engineered to drop in using precision-fit tooling and include professional-grade adhesive—installation takes under 15 minutes with zero modifications to your vehicle. Whether you're commuting in the city or enjoying an open road, these stalks signal that you've invested in the kind of meticulous detailing that separates enthusiasts from the everyday driver. They catch light without glare, age beautifully, and complement both minimal and bespoke interior schemes. What's Included 🎯 Carbon Fiber Stalk Set Indicator + wiper trim pair 🔧 High-Grip Adhesive 3M double-sided tape included 📋 Installation Guide Step-by-step photo instructions 🛡️ 30-Day Assurance Full money-back guarantee Product Highlights Authentic real carbon fiber construction—no plastic imitation Matte finish resists fingerprints and suits any interior palette Factory precision fit for 2016–2019 Model 3 (all variants) 3M adhesive allows non-destructive installation and repositioning Includes complete installation hardware and documentation Complements existing cabin upgrades seamlessly Lightweight yet durable—engineered for daily use Enhanced tactile feedback during indicator and wiper operation Sourced from Tier-1 aerospace-grade carbon suppliers Backed by Victorious Automotive's trusted 30-day guarantee Compatibility Model Year Variant Fit Status 2016–2017 All (Std, Long Range, Perf) Direct Fit 2018–2019 All (Std, Mid, Long Range, Perf) Direct Fit 2020+ Model 3 (Revised Interior) Not Compatible Please verify your vehicle's year and interior layout before purchase. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm GMT). Installation Notes Difficulty: Easy | Time: 10–15 mins Power off the vehicle and let the cabin cool to room temperature. Gently inspect the existing stalk trim to identify the adhesion edges. If replacing existing trim, carefully peel away the old pieces and clean residue with isopropyl alcohol. Allow the surface to dry completely. Remove the backing from the 3M adhesive strips on the new carbon fiber stalks. Align the stalks with precision and press firmly for 30 seconds per stalk to ensure full contact. Wait 24 hours before operating the indicators or wipers to allow adhesive cure. Pro Tip: Warm adhesive surfaces slightly with a heat gun (low setting) before installation to activate the 3M bond. This ensures maximum hold in high-vibration environments. Upgrade Your Model 3 Interior Today Small details matter. These carbon fiber stalks are the signature touch that transforms your cabin from stock to curated. Order now and drive with the confidence that comes from genuine premium materials and Victorious Automotive craftsmanship. Add to Cart Use code 22GET20 for 20% off when you add any 2 items 4.9/5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL/FedEx shipping ✓ Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Tesla, Inc. or any of its subsidiaries. Tesla is a registered trademark of Tesla, Inc. All product names, logos, and brands are the property of their respective owners.

Tesla · Model 3 · Interior Styling Glossy Carbon Wiper Stalk Covers – Tesla Model 3 Premium carbon fiber indicator and wiper stalk covers that elevate your Model 3's interior with understated luxury and modern aesthetics. T3 2016–2019 Genuine Carbon Fiber Glossy Finish Easy Install Overview Your Tesla Model 3 deserves interior details that match its precision engineering. These glossy carbon wiper and indicator stalk covers transform a utilitarian control into a design statement—the kind of upgrade that catches the eye every time you reach for the stalk. Crafted from genuine carbon fiber with a mirror-glossy finish, these covers add depth, contrast, and a refined technical edge to your cabin. They're the perfect response to Tesla owners who refuse compromise: maximum visual impact with zero complexity. Installation is tool-free and takes minutes. The high-quality double-sided tape means they stay put through years of daily use, and the robust carbon construction ensures they'll look as sharp five years from now as they do on day one. What's Included 🎁 Wiper Stalk Covers 1 set of genuine carbon fiber covers 🔧 Installation Tape Pre-cut double-sided adhesive strips Product Highlights Genuine carbon fiber construction with glossy UV-stable finish Precision-engineered to fit Model 3 stalks without modification High-quality double-sided tape for secure, long-term adhesion Tool-free installation in under 5 minutes Adds premium visual contrast to the steering column Durable and scratch-resistant finish No drilling, no permanent modifications Lightweight design preserves stalk feel and response Water and UV-resistant coating Perfect complement to other Model 3 carbon upgrades Compatibility Vehicle Years Compatibility Tesla Model 3 2016–2019 Direct Fit Tesla Model 3 2020+ Not Compatible Note: Always verify your vehicle year before checkout. Stalk design changed after 2019. Installation Difficulty: Beginner | Time: 5 minutes | Tools: None Clean the wiper and indicator stalks with a dry microfiber cloth. Remove any dust or residue. Peel the backing from the double-sided tape on the carbon cover. Align the cover carefully with the stalk and press firmly for 10 seconds. Repeat for the second stalk if included in your set. Allow adhesive to cure for 24 hours before heavy use. Tip: If you make a mistake during positioning, gently peel back the cover and reposition. Adhesive can be reused once. Why Victorious We source only genuine materials and partner with suppliers who understand precision automotive fit. Every product is tested by real enthusiasts before it ships. Your satisfaction isn't optional—it's guaranteed. Ready to Upgrade Transform your Model 3's interior with these genuine carbon fiber covers. Premium materials. Easy install. Lasting design. Add to Cart Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Tesla, Inc. or its subsidiaries. All references to vehicle models are for compatibility purposes only.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Silver Interior Frame Trim for Range Rover Evoque L538 2012–2018 A precision-cut, glue-fit ABS silver trim overlay that refreshes the interior frame detailing of your Evoque with a clean, factory-finish aesthetic — no drilling, no damage. Evoque L538 2012–2018 ABS Material Silver Finish Glue-Fit Install Interior Trim OEM Sizing 100% New ONESTICKERS Overview The Range Rover Evoque L538, produced between 2012 and 2018, established itself as one of Land Rover's most design-forward vehicles — a compact SUV that blended urban style with genuine off-road capability. Inside, the cabin reflects that ambition, but over time interior trim pieces can fade, scuff, or simply begin to look dated against the overall character of the car. This Silver Interior Frame Trim is a direct-fit ABS overlay designed to sit seamlessly over the existing interior frame surfaces of the Evoque L538. Finished in a clean silver tone with a 3D profile, it restores a sharp, premium look to one of the most visually prominent areas of the cabin. The adhesive-backed fitment means installation is clean and reversible, with no permanent modification required. Manufactured to OEM dimensions under the ONESTICKERS brand, this trim piece is precision-engineered to match the exact contours of the Evoque's interior frame — so it sits flush, looks factory, and protects the underlying surface from everyday contact wear at the same time. What's Included 🪟 Silver Frame Trim Overlay ABS silver trim piece, OEM-matched sizing 🔧 Pre-Applied Adhesive Glue backing ready for fitment 🧹 Clean-Fit Design No drilling or cutting required 📦 Direct Dispatch Ships worldwide via DHL, FedEx, UPS, TNT Product Highlights Precision-cut to OEM Evoque L538 frame dimensions High-quality ABS construction — durable and lightweight Silver finish adds a premium, contemporary interior tone 3D profile sits flush with existing trim surfaces Pre-applied adhesive backing for clean installation Protects original trim from scuffs and contact wear No drilling, cutting or permanent modification needed Fully reversible — can be removed without damage 100% brand new — not a refurbished or remanufactured part Compatible with all Evoque L538 variants, 2012–2018 Compatibility Vehicle Code Year Range Fit Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque (Facelift) L538 2016–2018 Direct Fit Range Rover Evoque Convertible L538 2016–2018 Direct Fit Range Rover Evoque L551 2019–Present Not Compatible Range Rover Velar L560 2018–Present Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean the target interior frame surface using an isopropyl alcohol wipe. Remove all dust, grease, and residue, then allow to dry completely before proceeding. Dry-fit the trim overlay against the frame surface to confirm alignment and verify the OEM size is correct for your specific Evoque variant and year. Peel back a small section of the adhesive backing and carefully position the trim piece from one end, pressing firmly as you go to avoid air bubbles or misalignment. Once fully seated, apply firm, even pressure across the entire trim surface for 30–60 seconds to ensure the adhesive bonds correctly to the substrate. Allow the adhesive to cure for at least 24 hours before exposing the trim to moisture, cleaning products or direct sunlight for extended periods. ⚠ Note: Ensure the cabin temperature is above 15°C (59°F) at time of installation. Cold surfaces significantly reduce adhesive bond strength. Do not attempt to reposition the trim repeatedly once the adhesive has made contact. Finish Your Evoque Interior the Right Way At Victorious Automotive, we stock a full range of interior and exterior accessories for the Range Rover Evoque L538. Browse the complete collection or get in touch with our team if you need guidance on fitment or compatibility. Shop Range Rover Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Red Carbon Fiber Dashboard Trim for Range Rover Sport L494 (2014–2019) — Left Hand Drive A bold, driver-focused interior upgrade crafted from real carbon fiber — adding striking visual depth to the Range Rover Sport L494 dashboard without a single tool required. Range Rover Sport L494 2014–2019 Left Hand Drive Real Carbon Fiber Red Finish Dashboard Trim Peel & Stick Interior Upgrade Overview The Range Rover Sport L494 was engineered to deliver a dynamic driving experience — a vehicle that sits at the intersection of genuine off-road capability and premium performance. Its interior, while refined from the factory, is a canvas that rewards thoughtful personalisation. This red carbon fiber dashboard trim is designed for drivers who want their Sport to reflect the same intensity behind the wheel as it delivers on the road. Constructed from 100% real carbon fiber, this trim piece brings genuine material quality to your dashboard. The woven carbon weave is finished in a deep, lacquered red that catches light with a richness you simply cannot replicate with vinyl wraps or ABS plastic alternatives. The result is an interior accent that feels purposeful and considered — not an afterthought. Engineered specifically for left-hand drive variants of the L494 Sport between 2014 and 2019, every contour and mounting point is matched precisely to the OEM dashboard geometry. Installation requires no drilling, cutting, or professional modification — the trim uses a high-strength automotive-grade 3M adhesive backing that bonds cleanly and removes without residue if needed. It's the kind of upgrade that takes minutes to fit but looks like it was always there. What's Included 🧩 Carbon Fiber Dashboard Trim 1× red carbon fiber trim panel, pre-cut for L494 LHD fitment 📋 Installation Guide Step-by-step printed instructions for a clean, confident fit 🧼 Surface Prep Wipe Alcohol cleaning wipe for optimal adhesion before application 📦 Protective Packaging Rigid foam-lined box to ensure zero transit damage Product Highlights 100% real carbon fiber construction — not plastic, not vinyl, not ABS Bold red lacquered finish with deep woven texture visible under all lighting conditions Precision-cut for the Range Rover Sport L494 left-hand drive dashboard geometry Automotive-grade 3M adhesive backing — no tools, no drilling, no modifications required Lightweight material adds no meaningful weight to the vehicle interior Resistant to UV fading, heat distortion, and everyday interior wear OEM-level surface finish with smooth edges and consistent lacquer depth Removable without surface damage — ideal for leased vehicles Compatible with factory dashboard surfaces including matte, gloss, and wood veneer trims Pairs cleanly with other Victorious carbon fiber interior accessories for a unified look Compatibility Vehicle Code Years Drive Fitment Range Rover Sport L494 2014–2019 Left Hand Drive Direct Fit Range Rover Sport L494 2014–2019 Right Hand Drive Not Compatible Range Rover Sport L494 2013 (Pre-facelift) LHD / RHD Not Compatible Range Rover Sport L461 2022–2026 LHD / RHD Not Compatible Range Rover Vogue L405 2013–2020 LHD / RHD Not Compatible Range Rover Velar L560 2018–2022 LHD / RHD Not Compatible Defender L663 2020–2026 LHD / RHD Not Compatible Installation Notes ⏱ Estimated Time: 15–25 minutes  |  🔧 Difficulty: Beginner-Friendly Confirm your vehicle is a left-hand drive Range Rover Sport L494 manufactured between 2014 and 2019 before proceeding. Park in a clean, dry environment with the cabin at room temperature. Avoid installation in cold or damp conditions, as this can reduce adhesive performance. Use the included alcohol wipe to thoroughly clean the target dashboard surface. Remove any dust, grease, or silicone residue. Allow to dry completely — approximately 2 minutes. Dry-fit the trim panel against the dashboard to confirm alignment and panel coverage before removing the adhesive backing. Peel back approximately one-third of the adhesive liner. Align one edge carefully with the panel boundary, then slowly press the trim into place while peeling the remaining liner. Apply firm, even pressure across the full surface using your thumb or a soft cloth for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 2 hours before exposing the trim to heat or direct sunlight to allow the adhesive to fully cure. ⚠ Important: This trim is designed exclusively for left-hand drive L494 models. Attempting to fit this piece to a right-hand drive vehicle will result in incorrect alignment. If you are unsure of your vehicle's drive configuration, check the VIN plate or your vehicle registration document before ordering. Built for Range Rover Sport Owners Who Demand More Every piece in the Victorious collection is selected for fit, material quality, and long-term durability. If you're upgrading the Sport L494, explore our full range of L494 interior accessories — or speak with our team directly on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop Range Rover Sport L494 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Velar & Evoque · Interior Trim Aluminum Alloy Central Air Conditioning & Volume Knob Trim — Range Rover Velar 2017–2019 & Evoque 2019–2020 Precision-machined aluminum alloy knob ring trims that instantly elevate the tactile quality and visual refinement of your Velar or Evoque's central console. Range Rover Velar 2017–2019 Evoque 2019–2020 Aluminum Alloy 3-Piece Set Peel & Stick Install ISO9001 Certified 4 Colour Options Interior Trim Overview The Range Rover Velar and second-generation Evoque represent two of the most design-forward vehicles in the Land Rover lineup — clean surfaces, considered proportions, and an interior language that rewards those who notice the details. But the factory-finish plastic surrounding the climate and volume knobs has always been the one area where the interior falls just short of its own ambition. These aluminum alloy knob ring trims are engineered specifically for the Velar (2017–2019) and Evoque (2019–2020) centre console layout. Each ring is precision-formed from aerospace-grade aluminum alloy and finished to a standard that complements the vehicles' existing metalwork. Available in four colourways — silver, blue, rose gold, and red — there is an option to match whether your interior leans understated or expressive. ISO9001-certified manufacturing ensures dimensional accuracy for a flush, rattle-free fit. The result is a cabin upgrade that feels factory-intentional rather than aftermarket-applied — the kind of detail that Velar and Evoque owners will notice every single time they reach for the climate controls. What's Included ⭕ Knob Ring Trims × 3 Full set covering AC and volume knobs 🔵 Choice of 4 Finishes Silver, Blue, Rose Gold, or Red 🔧 Pre-Applied Adhesive 3M-style peel-and-stick backing included 📋 Fitment Guide Model-specific placement reference Product Highlights Precision-machined from durable aluminum alloy — not plastic ISO9001-certified production for consistent dimensional accuracy Direct-fit design — no cutting, drilling, or modification required Four finish options: Silver, Blue, Rose Gold, and Red Environmentally responsible materials throughout manufacture Rattle-free fit with flush surface alignment to factory trim Peel-and-stick installation — reversible and residue-minimal Elevates tactile feel every time you adjust climate or volume Complements existing brushed metal interior elements 3-piece set covers all central console knob positions in one kit Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2019 All Variants Direct Fit Range Rover Evoque (L551) 2019–2020 All Variants Direct Fit Range Rover Evoque (L538) 2011–2018 All Variants Not Compatible Range Rover Velar 2020+ All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes ⏱ Estimated Time: 10–15 Minutes  |  Difficulty: Beginner Ensure the vehicle interior is at room temperature — cold surfaces can reduce adhesive performance. Avoid installation below 10°C. Clean each knob base thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue from around the knob collar and allow to dry completely. Dry-fit each ring trim to confirm orientation and alignment before committing. The trims are shaped to sit flush — test the fit without removing the adhesive backing first. Peel the protective backing from one trim at a time. Position carefully over the knob base and press firmly from the centre outward for 30–60 seconds. Repeat for all three trims. Allow the adhesive to cure for at least one hour before subjecting the trims to heat from the climate system. ⚠ Note: Do not apply excessive rotational force directly to the trim rings — they are decorative overlays, not structural components. If a trim lifts at the edges after installation, reapply with a trim-safe adhesive promoter for a more permanent bond. Complete Your Velar or Evoque Interior These knob trims pair beautifully with our wider range of Velar and Evoque interior accessories. Browse the full collection or get in touch with our team for fitment advice — we know these vehicles inside out. Shop Range Rover Velar Accessories Shop Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Mercedes G-Class · Infotainment Upgrade Wireless Apple CarPlay Upgrade Kit for Mercedes C/E/B/G Class NTG4.5/4.7 Seamless wireless Apple CarPlay and Android Auto integration—no factory screen replacement needed. NTG4.5 / NTG4.7 2011–2013 Wireless CarPlay Android Auto OEM Integration Overview This retrofit CarPlay system transforms your Mercedes C-Class, E-Class, B-Class, or G-Class (2011–2013 with NTG4.5/4.7 systems) into a modern connected cabin—without replacing your factory screen. Using the existing 7-inch or 8.4-inch display, you gain full wireless connectivity via Bluetooth and Wi-Fi, plus optional USB wired mode for charging and stability. Whether you're navigating with Google Maps, Waze, or Apple Maps, playing Spotify, or taking calls hands-free via "Hey Siri," everything you need is at your fingertips. The system retains full OEM button control, steering wheel integration, and the ability to switch back to your original interface in one tap. Your car stays authentic; your tech moves forward. Perfect for owners who want modern smartphone integration without the cost and hassle of factory head unit replacement. Compatible with AUX-activated or AMI interface systems, this kit slots seamlessly into your existing architecture. What's Included 📦 Wireless CarPlay Module Connects to your vehicle's AUX/AMI interface 🔌 USB Connection Cable Optional wired mode + device charging 📖 Installation Manual Step-by-step English instructions included ⚡ Multi-Protocol Support Apple CarPlay, Android Auto, AirPlay, Mirroring-Link Product Highlights Wireless CarPlay via Bluetooth and Wi-Fi connectivity Optional USB wired connection for stability and charging Full GPS app support: Google Maps, Waze, Apple Maps Music streaming: Apple Music, Spotify, Amazon Music, Tidal "Hey Siri" hands-free voice control integration Android Auto and AirPlay Mirroring compatibility Front, rear, and 360-degree camera support with guidance lines Advanced equalizer for personalised audio tuning Retains all OEM steering wheel and button controls One-tap switch back to factory interface via Home/Back button Compatibility & Screen Support Vehicle Model Year Range Screen Size Compatibility Mercedes C-Class (W204) 2011–2013 7" / 8.4" Direct Fit Mercedes E-Class (W212) 2011–2013 7" / 8.4" Direct Fit Mercedes B-Class (W246) 2011–2013 7" / 8.4" Direct Fit Mercedes G-Class (W463) 2011–2013 7" / 8.4" Direct Fit Pre-2011 or Post-2013 Models Before 2011 / After 2013 Any Not Compatible Vehicles without AUX/AMI Interface Any Any Not Compatible Installation & Setup Difficulty Level: Intermediate | Time: 45–60 minutes Verify AUX Activation: Check your vehicle settings to ensure AUX input is enabled in the infotainment system. If not, activate via the main menu or consult your manual. Locate AMI Interface: Open your centre console armrest box and locate the AMI (AUX Music Interface) connector or AUX input socket. Connect the Module: Plug the wireless CarPlay module into the AMI interface or AUX input. Secure with included fasteners if necessary. Power Connection: Route the power cable to your car's 12V accessory outlet or existing AUX power feed. Use the provided USB adapter if needed. Pair via Bluetooth: On your iPhone or Android device, search for the module in Bluetooth settings and pair. Follow the on-screen prompts to enable CarPlay/Auto. Test Navigation & Audio: Launch Google Maps or Apple Maps, play a music app, and verify all controls respond via your steering wheel and dashboard buttons. Adjust Equalizer (Optional): Fine-tune audio output using the built-in EQ settings via the module's menu. ⚠ Important: AUX must be activated in your vehicle before installation. Some models may require dealer activation or a software update. If you're unsure, consult your Mercedes manual or contact us at +44 203 943 9919 for pre-installation verification. Why Victorious Automotive? We specialise in premium, thoughtfully engineered upgrades for discerning vehicle owners. This CarPlay kit respects your Mercedes' original design while bringing it into the modern connected age—no expensive OEM replacements, no compromise on functionality. We've tested this module across NTG4.5 and NTG4.7 systems to ensure flawless integration and reliability. Every kit ships worldwide via DHL, FedEx, UPS, or TNT with full tracking. Your 30-day money-back guarantee means zero risk. And with our 4.9/5 star rating from 12,300+ verified buyers, you're buying from a team that genuinely cares about your drive. Ready to Upgrade? Transform your 2011–2013 Mercedes into a connected driving hub. Wireless CarPlay, Android Auto, hands-free Siri—all without touching your original screen. Order today and drive smarter tomorrow. Add to Cart Use code: 22GET20 for 20% off any 2 items 🌍 Worldwide Shipping ⏳ 30-Day Money Back 📞 Expert Support Mon–Fri 9am–7pm ⭐ 4.9 Stars | 12,300+ Reviews Disclaimer: Victorious Automotive is an independent accessory supplier and is not affiliated with, endorsed by, or authorised by Mercedes-Benz, Daimler AG, or any affiliated company. Product names and brands mentioned are the property of their respective owners. This product is designed for use on compatible vehicles as specified and is not a factory replacement or OEM component. Installation may require professional support. Always verify vehicle compatibility before purchase.

Victorious · BMW Mini · Infotainment BMW Mini 2017–2019 Wireless Apple CarPlay & Android Auto Integration Kit Seamless smartphone integration for your Mini EVO's 6.5" or 8.8" factory display—wireless CarPlay, Android mirroring, and full navigation in seconds. Mini EVO 2017–2019 Wireless CarPlay Android Auto 6.5" & 8.8" Plug-and-Play Overview For Mini EVO owners (2017–2019), factory infotainment systems often feel disconnected from modern smartphone ecosystems. This wireless Apple CarPlay and Android Auto integration kit bridges that gap entirely—turning your original 6.5" or 8.8" display into a fully functional smart hub, without replacing anything. The module installs discreetly into your car's AUX or AMI armrest interface and communicates wirelessly via Bluetooth and WiFi. Pair your iPhone or Android device once, and it connects automatically every time you drive. No cables. No clutter. Just seamless integration that feels factory. Access real-time GPS navigation, stream Spotify or Apple Music through your factory speakers, control everything via steering wheel buttons or voice (Siri for iPhone users), and enjoy camera support for aftermarket dash and 360° systems. The system preserves all OEM touch and physical controls, meaning your Mini drives and feels like a Mini—just smarter. What's Included 📱 Wireless CarPlay/Android Auto Module Main processing unit with Bluetooth, WiFi, and antenna 🔧 Installation Kit Connectors, brackets, and adhesive for your car's AUX/AMI interface 📖 Comprehensive User Manual Setup, pairing, and troubleshooting guide with diagrams Product Highlights Wireless Bluetooth & WiFi connectivity—no cables required Apple CarPlay (wireless and wired modes) with Siri voice control Android Auto mirroring for Android devices Live GPS navigation with real-time traffic data Stream Spotify, Apple Music, Amazon Music, and more Supports aftermarket front, rear, and 360° camera systems USB port for direct music and video playback Adjustable 10-band equalizer for audio optimization Full OEM steering wheel and touch screen button compatibility AirPlay and Apple Mirroring via USB connection Compatibility Model Year Display Compatibility Mini EVO 2017–2019 6.5 inch Direct Fit Mini EVO 2017–2019 8.8 inch Direct Fit Other Mini variants 2017–2019 Any Not Compatible Pre-Purchase Check: Your Mini must have an AUX input or AMI (Apple Music Interface) in the armrest box for installation. Verify this before ordering. Installation ⏱ Estimated Time: 30–45 minutes | Difficulty: Intermediate Power off your Mini and remove the armrest box from the center console (gentle pry with a trim tool). Locate the AUX or AMI connector inside. Disconnect it carefully. Connect the wireless module to the AUX/AMI port using the supplied connector. Use the adhesive bracket to secure the module inside the armrest cavity. Route antenna toward the windshield. Reinstall the armrest box and power on your Mini. Go to your car's Bluetooth settings and pair your smartphone to the module (search for "[Device Name]"). Open Apple CarPlay or Android Auto on your phone and accept permissions. Select the wireless module from your phone's CarPlay settings to confirm connection. Test CarPlay/Android Auto on your 6.5" or 8.8" display. You're done. Note: The module requires continuous 12V power. If your armrest AUX doesn't provide power, a separate 12V tap may be needed. Consult the manual or contact our team. Upgrade Your Mini's Infotainment Today Wireless Apple CarPlay and Android Auto aren't luxuries—they're essentials for staying connected while driving. This kit installs cleanly, works reliably, and transforms your Mini EVO's factory display into a modern smart hub. Shop Now Use code 22GET20 for 20% off when you buy 2+ items ✓ 30-day money-back guarantee ✓ 4.9/5 stars from 12,300+ verified reviews ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Mon–Fri support +44 203 943 9919 Victorious Automotive is not affiliated with or endorsed by BMW, Mini, Apple, or Google. Apple CarPlay and Android Auto are registered trademarks of their respective owners. All references to vehicle models, years, and specifications are for compatibility guidance only. Always verify fitment with your vehicle's exact specification before purchase.

Jaguar · E-Pace · Interior Trim Carbon Fiber Style ABS Interior Door Speaker Trim for Jaguar E-Pace 2018–2019 Premium carbon fiber aesthetic upgrade that transforms your E-Pace cabin with a modern, sporty finish. E-Pace 2018–2019 Carbon Fiber Style ABS Material Door Speaker Frame 4-Piece Set Overview The Jaguar E-Pace delivers refined design inside and out, but your cabin deserves touches that match its exterior sophistication. This 4-piece carbon fiber style ABS interior door speaker trim set elevates the aesthetics of your 2018–2019 E-Pace's cabin zones, adding contemporary visual depth and a premium feel to every door panel. Each piece is precision-molded from high-quality ABS plastic and finished in authentic carbon fiber-look weave, giving your speakers the appearance of carbon fiber trim without the weight or cost. The set covers all four door speaker frames, creating a coordinated, factory-quality upgrade that catches light and draws admiration from everyone who steps inside. Installation is straightforward—no drilling, no modifications to your E-Pace's original structure. Simply remove the factory speaker trim and clip these pieces in place. The result is an instant transformation of your cabin's interior character, elevating the sophistication of your driving environment. What's Included 🎯 4-Piece Trim Set Left and right front and rear door speaker frames ✨ Carbon Fiber Finish Authentic weave appearance, durable ABS construction 🔧 Clip-On Installation No cutting, drilling, or adhesive required ✅ Factory-Quality Fit Precision-molded for your 2018–2019 E-Pace Product Highlights Complete 4-piece door speaker trim set for all four door panels Realistic carbon fiber weave finish for premium cabin appearance Durable ABS plastic construction resists fading and wear Clip-on design eliminates modification to original trim Instant installation—no tools or adhesive needed Factory-quality fit and finish for Jaguar E-Pace 2018–2019 Enhances cabin cohesion with coordinated interior styling Lightweight and UV-stable for long-term durability Catches ambient light for added visual depth in cabin Easy removal and reinstallation without permanent marks Compatibility Vehicle Years Compatibility Jaguar E-Pace 2018–2019 Direct Fit Jaguar E-Pace 2020+ Not Compatible Jaguar F-Pace All Years Not Compatible Other Jaguar Models All Years Not Compatible Installation Notes 📍 Difficulty: Beginner | Time: 15–20 minutes Open all four doors of your E-Pace to access door speaker trim panels Gently pry off the factory speaker trim using a plastic trim removal tool (or flathead screwdriver wrapped in cloth) Clean the mounting area with a soft, dry cloth to remove dust and debris Align the new carbon fiber trim piece with the mounting clips on the door panel Press firmly until you hear or feel a click, confirming the clip engagement Repeat steps 2–5 for the remaining three door panels Step back and admire your upgraded E-Pace cabin from both inside and outside the vehicle Note: Do not apply excessive force when removing factory trim—it's held by simple clips. Work slowly and gently to avoid cracking. If clips feel stuck, gently flex the panel from multiple angles before pulling outward. Ready to Elevate Your E-Pace Cabin? Transform your Jaguar E-Pace's interior with contemporary carbon fiber styling. A simple, reversible upgrade that looks factory-quality and feels premium every time you open a door. Add to Cart Use code 22GET20 for 20% off any 2 items 30-Day Money-Back Worldwide Shipping 4.9★ Verified Reviews +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Jaguar Cars Ltd., or any official Jaguar entity. Jaguar is a registered trademark of Jaguar Land Rover Limited. All vehicle names, logos, and brands are the property of their respective owners. This product is designed as an aftermarket accessory and is sold for cosmetic enhancement purposes only.

Jaguar · E-Pace / XE / F-Pace / XFL / XEL · Interior Trim Carbon Fiber Steering Wheel Trim for Jaguar XFL, F-Pace, XE, XEL, E-Pace Premium carbon fiber steering wheel accent that elevates your interior with a motorsport-inspired aesthetic and hassle-free installation. E-Pace X760 X761 XE / XEL F-Pace XFL Carbon Fiber Weave Self-Adhesive Direct Fit Overview Whether you're piloting a Jaguar E-Pace, F-Pace, XE, XEL, or XFL, your steering wheel deserves the same attention to detail as the rest of your cabin. This carbon fiber steering wheel trim delivers a genuine upgrade that transforms one of the most-touched surfaces in your vehicle—injecting sportive character and premium tactile appeal into every drive. Crafted from durable ABS with an authentic carbon fiber weave finish, this trim piece wraps around your steering wheel's upper or lower spoke section (depending on model). It's engineered for direct fitment across Jaguar's modern compact and mid-size lineup, ensuring a factory-spec appearance with zero panel gaps or misalignment. Installation is genuinely straightforward. Backed with industrial-grade double-sided adhesive, this trim adheres cleanly in under five minutes—no fasteners, no drilling, no permanent modifications. If you ever want to remove it, it peels away cleanly without residue or damage. It's the definition of a tasteful, reversible cabin upgrade. What's Included ✓ Carbon Fiber Steering Wheel Trim Pre-cut, direct-fit piece with weave finish 🔧 Double-Sided Adhesive Strip Factory-strength bonding (pre-applied) 📋 Installation Guide Simple steps & prep recommendations 🎁 Alcohol Prep Wipe Ensures clean surface before adhesion Key Highlights Authentic carbon fiber weave with UV-stable topcoat Premium ABS construction—lightweight yet rigid Direct fit for XE, XEL, F-Pace, XFL, E-Pace (all years) Pre-applied industrial-strength adhesive backing 5-minute installation—no tools or drilling required Reversible—removes cleanly without residue Subtly enhances grip feel and tactile appeal Matches OEM interior color and finish standards Resistant to UV fading and daily wear Ships worldwide with tracked delivery Compatibility Model Year Range Status Jaguar E-Pace (X760, X761) 2017–Present Direct Fit Jaguar XE (X760) 2015–Present Direct Fit Jaguar XEL 2017–Present Direct Fit Jaguar F-Pace (X761) 2015–Present Direct Fit Jaguar XFL 2017–Present Direct Fit Installation Difficulty: Beginner | Time: 5 minutes Clean the steering wheel. Use the provided alcohol wipe to thoroughly clean the upper or lower spoke area where the trim will sit. Remove any dust, oils, or residue. Allow 1 minute to dry completely. Test fit the trim. Without removing the adhesive backing, position the trim on the steering wheel to confirm alignment and fitment. Peel and adhere. Carefully peel the protective backing from the adhesive strip. Press the trim firmly and evenly onto the steering wheel, working from one end to the other. Hold pressure for 10–15 seconds. Let it cure. Wait 24 hours before steering hard or driving aggressively to allow full adhesion. Note: Do not attempt installation on wet, dirty, or hot steering wheels. For best results, clean your vehicle, park in shade for 30 minutes, and allow all surfaces to reach room temperature before applying the trim. Ready to Upgrade Your Jaguar? This carbon fiber trim is a small touch that speaks volumes about your attention to detail. Add it to your cabin today and experience the difference a premium accent can make. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items 30-Day Money-Back Guarantee 4.9/5 Stars (12,300+ Reviews) Worldwide DHL & FedEx Shipping Mon–Fri Support: +44 203 943 9919 Victorious Automotive is an independent aftermarket supplier. We are not affiliated with Jaguar Land Rover, JLR, or any OEM manufacturer. All product names and vehicle designations are used for compatibility reference only. All sales are final on custom or modified items; however, all standard products qualify for our 30-day money-back guarantee.

Jaguar · Interior Trim · Steering Wheel Real Carbon Fiber Steering Wheel Trim for Jaguar XE, XF, F-Pace & E-Pace Precision-cut carbon fiber trim delivers authentic motorsport styling and instant interior elevation for your Jaguar. XE · XF · F-Pace · E-Pace 2016–2017 Real Carbon Fiber Direct Fit Premium Finish Overview Jaguar owners demand sophistication matched with performance. The XE, XF, F-Pace, and E-Pace represent a commitment to precision engineering and interior craftsmanship. This real carbon fiber steering wheel trim elevates that standard further, transforming your cabin with authentic motorsport-grade materials that speak to discerning drivers. Our steering wheel trim is machined from genuine 3K weave carbon fiber with a premium clear-coat finish. Unlike vinyl or plastic alternatives, you get tactile quality and unmistakable visual depth. The precision-cut design integrates seamlessly with your vehicle's existing trim ring, creating a cohesive, factory-fresh appearance that commands attention every time you grip the wheel. Installation takes minutes with no drilling, adhesives, or complex fasteners required. This is a bolt-on upgrade that transforms your driving experience immediately—the kind of detail that separates an ordinary Jaguar from a truly personalized one. What's Included 🎨 Carbon Fiber Trim Ring Real 3K weave, precision-cut for seamless fit 🔧 Installation Hardware All fasteners and mounting clips included 📋 Fitment Guide Vehicle-specific installation steps ✓ Quality Assurance 30-day money-back guarantee included Product Highlights Real carbon fiber construction—not vinyl wrap or plastic imitation Premium 3K weave pattern with clear-coat UV protection Precision-cut for factory-tight fitment on 2016–2017 models No drilling, no permanent modifications to your steering wheel Instantly upgrades cabin aesthetics with motorsport authenticity Lightweight and durable—designed for daily driving Easy installation in under 15 minutes Compatible with standard and sport steering wheels Enhanced grip texture improves steering feel Resale value uplift—premium interior detail buyers notice Compatibility Model Year Range Status Jaguar XE 2016–2017 Direct Fit Jaguar XF 2016–2017 Direct Fit Jaguar F-Pace 2016–2017 Direct Fit Jaguar E-Pace 2016–2017 Direct Fit Pre-2016 & Post-2017 Models All Not Compatible Installation Difficulty Level: Beginner | Time: 10–15 Minutes Remove your vehicle's steering wheel trim bezel by carefully inserting a flat tool at the designated release point (refer to your fitment guide for location). Lift away the factory plastic trim ring and set aside—no force required. Align the carbon fiber trim with the wheel's mounting slots and position carefully. Secure using the provided mounting clips at each anchor point, ensuring even pressure all around. Check alignment and fitment before final tightening of fasteners. Reinstall and admire your upgrade—transformation complete. Note: Do not use excessive force during removal or installation. Carbon fiber is rigid but will crack under impact. Take your time and use gentle, deliberate movements. If you're uncomfortable removing steering wheel components, consult a Jaguar dealer or qualified technician. Ready to Elevate Your Jaguar? This carbon fiber steering wheel trim is the detail that transforms an excellent interior into an exceptional one. Genuine materials, precision engineering, and motorsport character—exactly what your Jaguar deserves. Shop Now Use code 22GET20 to unlock 20% off when purchasing any two items. 4.9★ 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide DHL, FedEx, UPS, TNT Phone Support +44 203 943 9919 Victorious Automotive is an independent automotive accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Jaguar Cars Limited, or any official Jaguar entity. All product names, logos, and trademarks are the property of their respective owners. This product is designed for fitment only and does not modify engine performance, emissions systems, or vehicle safety features.

Jaguar Accessories · E-Pace · Interior Trim Matt ABS Interior Navigation Frame Trim for Jaguar E-Pace 2018–2020 Precision-engineered interior moulding that elevates your E-Pace's cabin with a modern, cohesive finish. E-Pace 2018–2020 ABS Plastic Matt Finish Direct Fit Navigation Trim Overview Your Jaguar E-Pace deserves an interior that reflects its sophisticated engineering. This matt ABS navigation frame trim replaces the factory surround with a cohesive, modern accent that transforms the dashboard at a glance. Built from high-quality, precision-cut ABS plastic with a durable matt finish, this trim integrates seamlessly with your E-Pace's design language. The moulding is engineered to sit flush against the existing navigation housing, requiring no modifications to your vehicle's electrics or structure. Installation is straightforward—no special tools required—and the result is a noticeable upgrade that catches light and shadow beautifully, adding visual depth to your cabin. Paired with other interior trim upgrades, it creates a cohesive aesthetic that feels bespoke and intentional. What's Included 📦 Navigation Frame Trim Single piece, precision-cut ABS ✓ Pre-finished Matt Surface No painting or treatment required 🔧 Installation Hardware Clips and adhesive backing included 📋 Fitting Guide Step-by-step instructions included Product Highlights Matt ABS construction resists fingerprints and scratches Precision-cut to OEM specifications for perfect fitment Seamless integration with factory navigation housing No drilling, cutting, or modification required Enhances cabin aesthetics without altering function Lightweight, durable, and long-lasting finish Complements other interior upgrades effortlessly Easy to clean with standard automotive products Professional appearance, DIY installation Backed by 30-day money-back guarantee Compatibility Jaguar E-Pace Model Year Range Fit Status Jaguar E-Pace (Standard) 2018–2020 Direct Fit Jaguar E-Pace (All Trims) 2018–2020 Direct Fit Jaguar E-Pace (2021+) 2021 onwards Not Compatible Installation Difficulty: Beginner | Time: 15–20 minutes Ensure your E-Pace's engine is off and the interior is clean and dry. Gently prise the factory navigation frame trim from its surround using a soft plastic tool or trim removal kit. Clean the adhesive area on the dashboard with a microfibre cloth and mild automotive cleaner. Allow to dry completely. Apply the pre-fitted adhesive backing to the new navigation frame trim or use the supplied clips as per the fitting guide. Carefully align the trim with the navigation housing, starting from the top corner and pressing firmly downward. Ensure all edges are seated flush with the dashboard. Allow 24 hours for adhesive to set before use. Note: Do not attempt to force the trim into place. If fitment feels tight, double-check alignment with your E-Pace's dashboard contours. If you have questions, contact our support team at +44 203 943 9919 (Mon–Fri 9am–7pm). Ready to Elevate Your E-Pace? Transform your cabin with this precision navigation frame trim. Simple to install, stunning to see, and engineered to last. Your interior will thank you. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars · 12,300+ Reviews 🚚 Worldwide Shipping · DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back Guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar Land Rover plc, Jaguar Cars Limited, or any official Jaguar entity. All vehicle names, logos, and specifications are the property of their respective owners. This product is designed for fitment to the specified vehicle models and is not an official Jaguar product.

```html Jaguar · E-PACE · Interior Trim Carbon Fiber Rear Air Conditioning Vent Frame Trim Elevate your E-PACE interior with precision-engineered carbon-style AC vent trim that combines modern aesthetics with factory-fit engineering. E-PACE 2018–2020 Carbon Fiber Style Rear AC Vent ABS Material Direct Fit Overview The Jaguar E-PACE is a refined compact luxury SUV that rewards drivers with sophisticated design and cutting-edge technology. Every detail—from its sculpted exterior to its intuitive cabin layout—reflects Jaguar's commitment to premium engineering. Interior trim upgrades are the perfect way to personalise that refined aesthetic and add a contemporary edge. This carbon fiber-style rear air conditioning vent frame trim is precision-cut from premium-grade ABS plastic and finished with an authentic carbon weave pattern. Designed specifically for E-PACE models (2018–2020), it replaces the factory AC vent surround with a modern, high-contrast accent that catches light beautifully and creates visual depth in the cabin. Installation is straightforward—no modification required. The trim clips directly into place, requiring only hand tools and 15–20 minutes of work. Whether you're refreshing a single accent or planning a comprehensive cabin upgrade, this vent trim delivers measurable impact at an accessible price point. What's Included 📦 Rear AC Vent Frame (1x) Carbon fiber-style ABS trim ring 🔧 Installation Hardware Pre-fitted clips & fasteners included 📖 Fitting Guide Step-by-step photo instructions ✓ Quality Assurance Factory-tested before dispatch Highlights Carbon fiber weave finish—authentic styling without the cost Precision-engineered ABS plastic—lightweight, impact-resistant, UV-stable Direct-fit design—no cutting, drilling, or modification required Factory-matched proportions—seamless visual integration with cabin design Pre-fitted clips—install with hand tools only (no adhesives needed) Enhanced cabin depth—modern contrast accent elevates interior ambiance Temperature-resistant material—safe for automotive cabin environments Easy removal—completely reversible if desired Comprehensive documentation—fitting guide included in English Premium packaging—protected shipping; 30-day money-back guarantee Compatibility Model Year Range Engine Fit Jaguar E-PACE 2018–2020 All petrol / diesel Direct Fit Jaguar E-PACE 2021+ All models Not Compatible Jaguar F-PACE 2015–2024 All models Not Compatible Jaguar XE / XF All years All models Not Compatible Note: Confirm your vehicle's build year and rear AC vent design before ordering. Contact us at +44 203 943 9919 if unsure. Installation Notes Difficulty: Beginner | Time: 15–20 minutes Open the rear doors and locate the factory AC vent surround on the cabin wall (behind rear seats, driver and passenger sides). Gently prise the factory vent frame away from the wall using a plastic trim removal tool or soft card (do not force—clips will release). Disconnect any wiring or sensor connectors if present (varies by trim level). Position the new carbon-style trim frame in place, ensuring clips align with mounting points. Press firmly until all clips snap into place and the trim sits flush with the surrounding panel. Reconnect any wiring and test ventilation function. Close rear doors and admire your upgraded cabin finish. Tip: Work in good light or use a headlamp. If clips feel tight, apply gentle upward pressure rather than lateral force to avoid damage to the trim mounting bosses. Ready to Upgrade Your E-PACE? Transform your cabin with authentic carbon-style trim that speaks to design-focused owners. Expert fitting support available—contact our team anytime. Shop Carbon Trim Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping via DHL & FedEx ✓ 30-day money-back guarantee ☎️ +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Jaguar Cars Ltd., or any official Jaguar brand entity. All product names and vehicle names are used for identification and compatibility purposes only. Vehicle illustrations are representative and may not reflect exact trim or specification. Please verify compatibility with your specific vehicle before purchase. Jaguar is a registered trademark of Jaguar Land Rover Ltd. ```

Jaguar Accessories · E-Pace · Interior Trim Matte Silver Air Conditioning Vent Frame Trim for Jaguar E-Pace 2018–2020 Precision-engineered ABS trim that elevates your E-Pace interior with a contemporary matte silver finish. E-Pace 2018–2020 Matte Silver ABS Plastic Precision Cut Interior Trim Overview Your Jaguar E-Pace deserves interior detailing that matches its sophisticated design language. This matte silver AC vent frame trim transforms the look of your cabin by replacing factory plastics with a premium, refined finish that catches light beautifully without unwanted gloss. Manufactured from high-quality ABS plastic and precision-cut to Jaguar specifications, these trim rings fit seamlessly into the existing vent housings. The matte silver treatment provides contrast and depth—ideal for owners seeking a subtle but noticeable upgrade that enhances the cockpit's modern aesthetic. Installation is straightforward and requires no specialist tools or dealership visits. In under 15 minutes, you'll have transformed a key focal point of your interior. This is interior detailing done right. What's Included 📦 2 × Vent Trim Rings Left and right AC vents ✓ Direct Fit Design No cutting or modification needed 🎨 Matte Silver Finish Premium coating resists scratches 📋 Installation Guide Step-by-step instructions included Product Highlights Premium matte silver finish with anti-glare coating High-quality ABS plastic engineered for durability Precision-cut to match factory vent geometry No drilling, gluing, or permanent modifications Instant visual upgrade to your cabin interior Resists fingerprints and light scratching Compatible with factory climate control systems Set of 2 pieces (left and right vents) Lightweight with secure retention clips Professional appearance that rivals OEM upgrades Compatibility Jaguar E-Pace Model Status E-Pace 2018–2020 Direct Fit E-Pace 2021+ Not Compatible Other Jaguar Models Not Compatible Installation Notes Difficulty Level: Easy | Time: 10–15 minutes Switch off the engine and allow the cabin to cool. Gently prise the factory trim ring from the AC vent housing using a soft plastic tool (avoid sharp metal). Remove any residual adhesive or dust from the vent housing with a microfibre cloth. Align the new matte silver trim ring with the vent opening, ensuring the retention clips are positioned correctly. Press firmly until you hear or feel a secure click—the trim should sit flush with no gaps. Repeat steps 2–5 for the second vent (passenger side). Test the AC airflow to confirm full functionality. ⚠ Note: Do not force the trim into place. If resistance is felt, remove and re-align the retention clips. Forcing may damage the vent housing or trim ring. Elevate Your E-Pace Interior Today Small details define the difference between a standard cabin and a refined one. This matte silver AC vent trim is the kind of upgrade that makes you notice your interior every time you sit down—and that's the mark of truly thoughtful personalisation. Shop Jaguar E-Pace Trim Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars — 12,300+ verified reviews 🚚 Worldwide shipping — DHL, FedEx, UPS, TNT ✓ 30-day returns — money-back guarantee 📞 UK support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, or any official Jaguar brand entity. All vehicle names and logos are registered trademarks of their respective manufacturers, used for identification purposes only.

Jaguar · E-Pace · Interior Trim ABS Interior Door Handle Trim for Jaguar E-Pace 2018–2019 Premium OEM-style interior trim upgrade that transforms your E-Pace cabin with factory-finished aesthetics and seamless compatibility. E-Pace 2018–2019 ABS Material 4-Piece Set Interior Trim Direct Fit Overview The Jaguar E-Pace represents a bold statement in compact luxury SUV design. Every detail matters—from exterior styling to the tactile experience inside. Your door handles are among the most-touched surfaces in the cabin, yet they're often overlooked as an upgrade opportunity. This 4-piece ABS interior door handle trim set delivers a straightforward way to refresh your E-Pace's cabin. Manufactured from durable ABS plastic with a premium finish, these trim pieces slip over your existing handles to provide a cohesive, upscale appearance. Whether you're aiming for a subtle enhancement or a complete interior refresh, this set integrates seamlessly with your vehicle's existing aesthetics. Perfect for owners who care about interior detail and want an affordable, non-invasive upgrade that requires no cutting or modification. What's Included 🚗 4-Piece Trim Set All four door handles (2 front + 2 rear) ✓ Direct Fit Design No modifications required 🔧 Simple Installation 5–15 minutes per door 📦 Protective Packaging Secure transit, ready to install Product Highlights Premium ABS construction for durability and refined finish OEM-style design that matches factory interior aesthetics All four doors covered (front left, front right, rear left, rear right) No drilling, cutting, or permanent modifications needed Easy slide-on installation—no special tools required Enhanced tactile quality and grip comfort Scratch and UV-resistant finish Direct fit for 2018–2019 Jaguar E-Pace models Lightweight and maintains original door mechanism function Affordable way to refresh your cabin without dealer costs Compatibility Model Year Range Compatibility Jaguar E-Pace 2018–2019 Direct Fit Jaguar E-Pace 2020+ Not Compatible Other Jaguar Models Any Year Not Compatible Verify Your Model Year: This trim is engineered for 2018–2019 E-Pace models only. Check your vehicle registration or door jamb plate to confirm compatibility before purchase. Installation Notes Difficulty Level: Beginner | Time: 20–30 Minutes Open Each Door: Begin with the driver's door. Open it fully and ensure good lighting inside the cabin. Inspect Existing Handle: Note the current handle design and grip orientation. Ensure the door mechanism is clean and dry. Slide Trim Over Handle: Gently slide the ABS trim piece over your existing handle. It should fit snugly without forcing. Verify Alignment: Check that the trim sits flush and level. Press gently around all edges to ensure full contact. Repeat for All Doors: Move to the front right, then both rear doors. Use the same process for consistency. Test Grip and Function: Open and close each door several times to confirm the handle operates smoothly and the trim doesn't shift. Final Inspection: Step back and review the overall appearance. Gaps or misalignment indicate the need for minor repositioning. Safety Tip: Do not force trim pieces onto handles. If resistance occurs, remove and inspect for debris or manufacturing variances. A slight gap is normal and will close under light pressure during normal use. Elevate Your E-Pace Interior Premium cabin details don't have to demand a premium price. This 4-piece door handle trim set gives your Jaguar E-Pace a refined, cohesive look in under 30 minutes—with zero modification and maximum confidence. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews ✓ 30-day money-back guarantee 🌍 Worldwide DHL/FedEx shipping 📞 UK support: +44 203 943 9919 This product is not affiliated with Jaguar Land Rover plc, its subsidiaries, or dealers. All vehicle names and trademarks are property of their respective manufacturers. Product compatibility is provided for reference only. Always verify fitment before purchase. Victorious Automotive assumes no liability for incorrect installations or incompatible applications.

Jaguar · E-Pace · Interior Trim Carbon Fibre Electronic Handbrake Cover – Jaguar E-Pace Premium carbon fibre handbrake surround upgrade that transforms your E-Pace cabin with motorsport styling and precision engineering. E-Pace 2018–2020 Carbon Fibre Electronic Handbrake Easy Install Precision Cut Overview Your Jaguar E-Pace deserves interior details that match its bold exterior. This carbon fibre handbrake cover elevates the cabin environment with authentic carbon weave texture and industrial finish—replacing the standard plastic surround with a component that feels engineered rather than assembled. Precision-cut from high-quality ABS plastic with a carbon fibre look (or silver for understated elegance), this single-piece trim slots around your electronic handbrake without modification. It's the kind of upgrade that catches your eye every drive cycle, anchoring the dashboard with a sense of intentional craftsmanship that factory interiors simply don't deliver. Installation is straightforward—no special tools, no clips to break. Fits perfectly into the original mounting points, sits flush with surrounding trim, and is backed by our 30-day money-back guarantee because we believe it should transform your cabin instantly. What's Included 🎨 Carbon Fibre Handbrake Cover Precision-cut, ready to install ⚙️ Pre-fitted Mounting Points Aligns perfectly with E-Pace surround 📋 Installation Guide Step-by-step with photo reference Why This Cover Works Authentic carbon fibre weave finish—not printed or adhesive wrap High-density ABS construction withstands daily contact and UV exposure Precise tolerance—sits perfectly in original surround without gaps or rattle Available in carbon fibre or silver for different interior themes Single component—no secondary trim pieces to source or align Direct fit—no drilling, cutting, or permanent modifications needed Factory appearance—blends seamlessly with E-Pace cabin architecture Instantly improves perceived interior quality and material perception Lightweight and durable—engineered for 5+ year lifespan Compatible with all E-Pace variants (2018–2020) with electronic handbrake Compatibility Variant Years Status Jaguar E-Pace S / SE / HSE 2018–2020 Direct Fit Jaguar E-Pace R-Dynamic 2018–2020 Direct Fit E-Pace 2021+ (revised interior) 2021+ Not Compatible Manual handbrake models Any Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Power off the vehicle and sit in the driver's seat. Ensure the handbrake is fully released. Inspect the existing surround for any debris or damage. Clean the mounting area gently with a microfibre cloth. Position the new cover over the electronic handbrake module, aligning the mounting points with the original surround holes. Press gently but firmly into place—the precision-cut design ensures alignment without forcing. You'll hear two subtle clicks as the side clips engage. Test the handbrake by engaging and releasing it smoothly three times to confirm zero contact or rattle. Step back and inspect the fit—the cover should sit flush with no visible gaps or misalignment. Important: If the handbrake feels stiff after installation, the cover is too far forward. Gently lift and reposition it slightly backward until operation is smooth. Do not force the handbrake to engage—this indicates misalignment. Ready to Upgrade Your E-Pace Cabin? Every E-Pace owner deserves interior details that feel as premium as the exterior. This carbon fibre handbrake cover is the foundation of a truly bespoke cockpit—the kind of upgrade you'll notice every single time you drive. Shop Now Use code: 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ 4.9/5 stars – 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Support: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover, JLR, or any OEM manufacturer. All vehicle names and badges are used for identification purposes only. Product compatibility is guaranteed for listed variants; always confirm your vehicle's year, trim, and interior configuration before ordering.

Jaguar · E-Pace · Interior Trim Matt ABS Interior Center Console Gear Shift Trim for Jaguar E-Pace 2018–2020 Refresh your E-Pace cabin with precision-engineered ABS trim that elevates the interior aesthetic instantly. E-Pace 2018–2020 ABS Plastic Matt Finish Interior Trim Direct Fit Overview The Jaguar E-Pace is a sophisticated compact luxury SUV that demands interior finishes worthy of its premium positioning. The center console and gear shift surround are focal points every time you settle into the driver's seat, and this matt ABS trim package transforms that space with a contemporary, refined aesthetic. This precision-cut ABS trim set is engineered specifically for E-Pace models from 2018 to 2020, delivering a factory-quality fit without the premium dealer pricing. The matt finish resists fingerprints and gloss, maintaining a sophisticated appearance through daily use. Installation is straightforward—no special tools or modifications required—making it an accessible upgrade for owners seeking cabin refinement. Whether you're refreshing a well-loved interior or personalizing a recently purchased E-Pace, this trim elevates perceived quality and adds a touch of modern sophistication to your driving environment. What's Included 📦 Center Console Trim Precision-molded ABS with matt finish ⚙️ Gear Shift Surround Complete coverage, direct fit ✓ Adhesive & Fasteners Installation hardware included 📋 Fitment Guide Step-by-step installation instructions Product Highlights High-quality ABS plastic – durable and lightweight Matt finish resists fingerprints and gloss Precision-cut for seamless fit on 2018–2020 E-Pace No modifications or special tools required Instantly upgrades cabin aesthetic UV-resistant formula maintains colour over time Easy to install – DIY-friendly process Professional factory appearance Affordable alternative to dealer pricing One-piece set ready to fit Compatibility Model Year Range Generation Fit Status Jaguar E-Pace 2018–2020 First Generation Direct Fit Jaguar E-Pace 2021+ Facelift & Beyond Not Compatible Jaguar F-Pace All Years — Not Compatible Jaguar XE / XF All Years — Not Compatible Installation Notes Difficulty Level: Beginner to Intermediate Estimated Time: 30–45 minutes Installation Steps Disconnect the vehicle battery (recommended safety precaution) Gently remove any trim panels or fascias surrounding the center console using a plastic trim tool Clean the mounting surface with a soft, dry cloth to ensure optimal adhesion Apply included adhesive evenly to the rear of the ABS trim panel Carefully position the trim piece, ensuring alignment with adjacent panels Press firmly for 30 seconds to establish a secure bond Allow adhesive to cure for 24 hours before use Reconnect the battery and test fitment Important: Do not force trim pieces into place. If alignment seems off, remove and reposition carefully. Trim may require minor adjustment during the first installation. Complete Your E-Pace Interior Refresh A refined cabin is the signature of a well-maintained luxury SUV. This trim upgrade is the perfect starting point for E-Pace owners seeking understated elegance and contemporary finishes. View E-Pace Collection Use code 22GET20 for 20% off any 2 items 30-Day Money-Back Guarantee 4.9/5 — 12,300+ Verified Reviews Worldwide Shipping — DHL, FedEx, UPS Mon–Fri 9am–7pm GMT — +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, its subsidiaries, or any of its official retailers and distributors. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility with the specified vehicle model and year range; fitment and results may vary based on individual vehicle condition and installation technique.

```html Jaguar · E-PACE · Interior Trim Rear Air Conditioning Vent Frame Trim for Jaguar E-PACE 2018–2020 Premium ABS interior trim upgrade that adds refined styling to your E-PACE cabin in minutes. E-PACE 2018–2020 ABS Plastic Rear AC Vent Direct Fit Overview The Jaguar E-PACE is a compact luxury crossover that deserves interior detailing worthy of its bold exterior. This rear air conditioning vent frame trim elevates your cabin's aesthetic with precision-engineered ABS construction that matches OEM fitment perfectly. Designed specifically for 2018–2020 E-PACE models, this single-piece trim frame wraps your rear AC vents in a refined, modern look that catches light beautifully. Unlike generic trim pieces, this is engineered to specification—meaning no filing, no gaps, and no guesswork during installation. Whether you're refreshing an aging interior or personalising a newer purchase, this upgrade delivers visible impact without breaking the bank or your weekend schedule. What's Included 📦 Rear AC Vent Frame Single precision-cut ABS trim piece ⚙️ OEM Fitment Direct bolt-in compatibility 2018–2020 🎯 Ready to Install No modification or trimming required ✔️ Quality Assured Tested for fit and finish consistency Product Highlights Precision-cut ABS construction—no warping or brittleness Exact OEM profile matches factory vent dimensions Seamless integration with factory interior trim Lightweight design reduces vibration and rattle Single-piece frame simplifies installation UV-resistant finish maintains colour and gloss Sourced from premium automotive-grade suppliers Complements factory Jaguar design language No tools or adhesives needed for fitment Immediate visual cabin refresh without interior strip-down Compatibility Vehicle Model Year Range Compatibility Jaguar E-PACE 2018–2020 Direct Fit Jaguar E-PACE 2021+ Not Compatible Other Jaguar Models All Not Compatible Installation Notes Installation Difficulty: Easy | Time: 10–15 minutes Open the rear door and locate the air conditioning vent frame in the cabin trim panel. Gently prise the existing vent frame outward using a soft plastic trim removal tool or credit card (avoid sharp tools that can mark trim). Carefully disconnect any wiring or clip attachments from the old frame (note their positions). Align the new ABS frame with the vent opening—it should slide into the factory recess smoothly. Press firmly around all edges until you hear or feel clips engage with the panel. Reconnect any wiring or clips to the new frame in their original positions. Close the rear door and inspect fitment from multiple angles—ensure no gaps or misalignment. Note: If the frame feels tight during installation, do not force it. Instead, check that all clips on the panel are properly seated. A gentle wiggle-and-push motion works better than applying brute force. Forcing can crack the ABS or damage panel clips. Ready to Elevate Your E-PACE Interior? Transform your cabin with this precision-engineered rear AC vent trim. Fits perfectly, installs in minutes, and delivers lasting visual impact. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars · 12,300+ Reviews ✓ Worldwide Shipping · DHL, FedEx, UPS 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, Jaguar, or any manufacturer. Product names and vehicle model designations are used solely for compatibility and identification purposes. All trademarks are the property of their respective owners. ```

```html Jaguar · E-Pace · Interior Protection Interior Door Sill Protect Plate Panel Cover Trim for Jaguar E-Pace 2018–2020 Premium stainless steel door sill protection plates that guard against scuffs while elevating your E-Pace's interior aesthetic. E-Pace 2018–2020 Stainless Steel Set of 4 Easy Install Overview The Jaguar E-Pace is a striking compact luxury SUV that demands attention to detail both inside and out. Your door sills are among the first contact points for passengers and one of the most vulnerable areas to scuffing from everyday wear—muddy boots, luggage, and daily entry take their toll on unprotected trim. These Interior Door Sill Protect Plate Panel Cover Trim sets deliver high-quality stainless steel protection engineered to shield against marks, scratches, and dirt transfer. Each precision-cut piece integrates seamlessly with the E-Pace's door frame, maintaining the factory aesthetic while introducing a subtle, professional chrome accent that catches light and elevates your cabin's premium feel. Installation is straightforward—no tools required, no drilling—and the adhesive backing ensures a permanent, rattle-free bond. Choose from three distinct styles to suit your personal taste, whether you prefer understated elegance or bold visual presence. What's Included 🛡️ 4 × Door Sill Plates Front and rear passenger-side coverage ✨ Premium Stainless Steel Precision-cut, corrosion-resistant finish 🎨 3 Style Options Select your preferred chrome profile and finish 📦 Ready to Install Pre-cut, pre-finished, adhesive-backed Product Highlights High-quality precision-cut stainless steel construction Corrosion-resistant finish maintains appearance year-round Factory-fit design matches E-Pace door sill geometry perfectly Three distinct style options to suit personal preference No-drill, adhesive installation—under 10 minutes total Protects against scuffs, marks, dirt transfer, and wear Chrome moulding adds premium, bespoke cabin ambiance Complete 4-piece set covers all door entry points Easy to clean and maintain; resists fingerprints Lifetime durability with proper care Compatibility Vehicle Model Code Year Range Fit Jaguar E-Pace C741 2018–2020 Direct Fit Jaguar E-Pace C741 2021+ Not Compatible Jaguar F-Pace All Years — Not Compatible Jaguar I-Pace All Years — Not Compatible Note: This product is designed exclusively for 2018–2020 Jaguar E-Pace models. Fitment varies by model year and generation. Confirm your vehicle year before purchase. Installation Installation Difficulty: Beginner | Time: ~10 minutes Clean the door sills: Use a microfibre cloth and mild soap solution to remove all dirt, dust, and residue from the E-Pace door sill trim. Allow to dry completely (2–3 minutes). Prepare the surface: Lightly buff the sill with a clean, dry cloth to ensure the adhesive backing makes full contact. Do not use abrasive materials. Peel and position: Carefully remove the adhesive backing from the first plate. Align it precisely with the door sill edge, starting at the front corner. Press and hold: Apply firm, even pressure across the entire length of the plate for 10–15 seconds to activate the adhesive bond. Repeat for all four plates: Follow steps 2–4 for the remaining door sills (passenger front, passenger rear, driver front, driver rear). Cure time: Allow 24 hours before exposing the sills to water or heavy use to ensure full adhesive set. ⚠️ Important: Do not install on damp, dusty, or textured surfaces. Ensure E-Pace is parked indoors during installation. If you live in a cold climate, allow the vehicle to warm to room temperature before applying the plates. Poor surface preparation is the leading cause of premature lift-off. Ready to Protect Your E-Pace? Preserve your Jaguar's interior trim and add a touch of luxury chrome detail in minutes. These precision-engineered door sill plates are engineered to outlast, outshine, and outperform—backed by our 30-day money-back guarantee. Shop Door Sill Plates Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 stars • 12,300+ reviews 🚚 Worldwide shipping • DHL, FedEx, UPS ✓ 30-day guarantee • No questions 📞 +44 203 943 9919 • Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with Jaguar Land Rover, JLR, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for use as an aftermarket enhancement only and does not constitute an endorsement by Jaguar Land Rover. Vehicle compatibility information is provided for reference only; please verify fitment with your vehicle documentation or contact our support team before purchase. ```

Victorious Automotive · Range Rover Evoque L538 · Interior Pedals & Footrests Stainless Steel Dead Pedal Foot Rest for Range Rover Evoque 2012–2019 (L538) — Left Hand Drive A precision-fit dead pedal upgrade that brings a factory-premium feel to your Evoque's driver footwell — crafted from brushed stainless steel with a durable black plastic base for a clean, lasting finish. Range Rover Evoque L538 2012–2019 Left Hand Drive Only Stainless Steel Black Plastic Base Dead Pedal / Foot Rest Interior Upgrade 150g Lightweight CE Certified No Drilling Required Overview The Range Rover Evoque L538 — produced between 2012 and 2019 — set a new benchmark for compact luxury SUVs when it arrived. With its distinctive coupé-inspired silhouette, premium interior appointments, and dynamic driving character, the Evoque attracted owners who demanded more from every detail of their vehicle. The driver's footwell is no exception: long motorway journeys and spirited driving both deserve a foot rest that feels as considered as the rest of the cabin. This dead pedal foot rest is designed specifically for the Evoque L538 in left hand drive configuration, slotting precisely into the driver's footwell to provide a solid, comfortable resting point for the left foot. The combination of brushed stainless steel and black plastic delivers both visual refinement and long-term durability — resisting scuffs, wear, and the kind of daily abuse that original rubber mats simply can't handle. At just 150g, this is one of those understated upgrades that you'll notice every single drive — a satisfying solidity underfoot that elevates the feel of the entire driving environment without altering the factory aesthetic. It's the kind of detail that separates a well-kept Evoque from an exceptional one. What's Included 🦶 Dead Pedal Foot Rest Cover Brushed stainless steel face with black plastic mount base 🔩 Fixing Hardware All necessary fixings included for a secure, rattle-free fit 📋 Installation Guide Step-by-step fitting instructions for a hassle-free install Product Highlights Precision-engineered for the Range Rover Evoque L538 (2012–2019) footwell dimensions Brushed stainless steel surface — resists scratching, scuffing, and long-term wear Black plastic base provides a secure, vibration-free mounting platform Left hand drive specific design — perfect fit for LHD driver footwells only Lightweight at 150g — no impact on pedal ergonomics or driving dynamics CE certified — independently tested and verified for quality and safety Complements factory interior trim without altering the OEM aesthetic Simple, tool-minimal installation — no permanent modifications or drilling Adds lasting comfort on long drives by providing a dedicated left foot rest point An affordable interior upgrade that delivers a noticeably premium feel every drive Compatibility Model Generation Year Range Drive Fitment Range Rover Evoque L538 (First Gen) 2012–2019 Left Hand Drive Direct Fit Range Rover Evoque L538 (First Gen) 2012–2019 Right Hand Drive Not Compatible Range Rover Evoque L551 (Second Gen) 2019–Present All Not Compatible Range Rover Sport L494 — 2013–2020 All Not Compatible Land Rover Discovery Sport — All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 minutes  ·  Tools Required: None / Minimal Ensure the driver's footwell is clean and free of debris before beginning installation — wipe down the existing foot rest area with a dry cloth. Remove any existing OEM rubber foot rest cover or mat from the driver's footwell if present. Align the new stainless steel foot rest cover over the mounting area, ensuring the black plastic base sits flush and level against the footwell floor. Secure using the provided fixing hardware — press or clip firmly into place until the unit is stable and rattle-free. No drilling or permanent modification is required. Apply light pressure across the surface to confirm the fitment is secure, then test by resting your foot naturally to verify comfort and stability before driving. ⚠ Important: This foot rest is designed exclusively for Left Hand Drive Range Rover Evoque L538 models (2012–2019). Attempting to fit this item to a Right Hand Drive vehicle or any other model will result in an incorrect fit. Please confirm your vehicle's drive configuration before ordering. Upgrade Your Evoque's Footwell Today Shop the full Range Rover Evoque L538 accessories collection at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Worldwide shipping via DHL, FedEx, UPS, and TNT. Protected by our 30-day money-back guarantee. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

```html Victorious · Mercedes GLS/GL X167 · Running Boards Electric Motor Automatic Running Boards for Mercedes-Benz GLS/GL X167 Premium motorised side steps with full-integration into your OEM door triggers—automatic deployment on unlock, seamless retraction on lock. X167 2020+ Aluminium Alloy Automatic Deploy 800kg Capacity No Drilling Overview The Mercedes-Benz GLS and GL-Class (X167) are commanding three-row luxury SUVs designed for families and explorers who demand comfort at every step. High ground clearance and a commanding driving position, however, can make cabin entry a challenge—particularly for shorter passengers or those with mobility considerations. These Electric Motor Automatic Running Boards transform entry and exit into a seamless, luxurious experience. Precision-engineered from marine-grade aluminium alloy and stainless steel, they activate automatically when you unlock your doors and retract silently when you lock up. The 800kg weight capacity means confident footing for all occupants, while the integrated side step bar design complements the GLS/GL's bold body lines. Installation utilises your vehicle's existing chassis mounting points—no drilling, no permanent modifications. Whether you're speccing a new GLS or upgrading a current model, these boards deliver the quality and reliability that Mercedes owners expect. What's Included 📦 Motorised Running Board Set L/R pair with integrated electric actuators 🔩 Stainless Steel Mounting Hardware Corrosion-resistant brackets and fasteners ⚡ Wiring Harness & Connectors Pre-assembled door trigger integration 📋 Installation Guide Step-by-step instructions with torque specs Product Highlights Aluminium alloy construction with ABS and stainless steel accents Automatic motor deployment on door unlock, retraction on lock 800kg static load capacity for all passenger weights ISO9001, TS16949, and CCC certified engineering Scratch-resistant powder coating and wear-tested surface Integrated side step bar—factory aesthetic integration Weight: 38–40kg per pair, balanced installation No drilling required; uses OEM chassis anchor points Sealed motor assembly—water and salt spray resistant Failsafe manual descent in case of power loss Compatibility Model Year Range Code Fitment Mercedes-Benz GLS 2020–2026 X167 Direct Fit Mercedes-Benz GL-Class 2020+ X167 Direct Fit Mercedes-Benz GLE 2020–2026 C167 Not Compatible Mercedes-Benz G-Class All W463 Not Compatible Installation Difficulty Level: Intermediate | Time: 2–3 Hours Professional installation is recommended if you're not comfortable working with vehicle electrical systems. Improper door trigger wiring can affect lock/unlock function. Park on level ground and engage parking brake. Disconnect negative battery terminal for safety. Locate OEM chassis mounting points beneath driver and passenger doors. Install stainless steel brackets using provided hardware; torque to 25 Nm. Slide motorised board assembly onto brackets and secure with locking fasteners. Route wiring harness along factory cable trays to driver-side door module. Splice door unlock trigger wire to running board harness (requires 12V switched signal). Reconnect battery and test automatic deployment/retraction cycle. Verify smooth operation at full extension and retraction limits. Final torque check on all fasteners. ⚠ Warning: If you are not confident splicing into door module wiring, have this completed by a qualified Mercedes technician. Incorrect wiring can disable central locking or trigger warning lights. Complete Your GLS/GL Upgrade Elevate cabin access and add a touch of automotive sophistication. These motorised running boards are engineered to the same standards as OEM Mercedes components—tested for reliability across European winters and summer heat. Ready to order? Shop Running Boards for X167 Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide DHL, FedEx, UPS ✅ 30-day money-back guarantee Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler-Benz, or any official franchised dealer. All product names and marks are the property of their respective owners. This product is designed and tested for the Mercedes-Benz GLS/GL X167 platform (2020+) and is not an OEM component. Installation at a qualified Mercedes service centre is recommended. Warranty does not cover improper installation or electrical modification beyond the scope of this guide. ```

Victorious · Mercedes GLS/GL · Running Boards Running Boards Side Steps for 2020 Mercedes-Benz GLS/GL X167 Premium aluminium side steps engineered for secure, confident entry—with professional looks and zero-drilling installation. X167 2020+ Aluminium Alloy Stainless Steel 600–800 kg Load No Drilling Overview The 2020 Mercedes-Benz GLS and GL (X167) is a flagship three-row SUV demanding premium accessories that match its engineering standard. These running boards are precision-engineered for seamless integration with your vehicle's existing architecture, providing safe, everyday access while enhancing your GLS/GL's visual presence. Built from aerospace-grade aluminium alloy with reinforced stainless steel components, these side steps combine lightweight strength with long-term durability. The thickened mounting bracket supports loads of 600–800 kg, meaning they'll handle passenger weight, luggage, or roof-rack preparation without flex or fatigue. Scratch-resistant surfaces and vibration-dampening technology ensure they remain pristine through years of daily use. Installation requires no drilling—the steps bolt directly to your chassis using existing factory attachment points. Stainless steel hardware and corrosion-resistant plating ensure performance in all climates, from coastal salt spray to winter salt roads. Backed by ISO 9001 and TS16949 certification, these are engineered components, not aftermarket compromises. What's Included 📦 Running Board Set Matched pair, precision-fitted for X167 ⚙️ Stainless Steel Brackets Thickened mounting hardware with anti-vibration 🔧 Installation Accessories Fasteners, clips, seals, and detailed user guide Product Highlights Lightweight aluminium alloy with reinforced ABS and stainless steel for durability High load capacity: 600–800 kg with thickened, vibration-damping brackets Corrosion-resistant finish withstands salt, heat, acid, and seasonal exposure Scratch-resistant surface keeps steps looking factory-fresh year-round Installation via existing chassis holes—no drilling, no bodywork modification Precision-moulded gaps and fitment eliminate rattles and misalignment ISO 9001 & TS16949 certified engineering and manufacturing Approximately 17–18 kg per set—adds minimal unsprung weight Enhanced approach angle access for children, elderly passengers, and cargo loading OEM-style appearance integrates seamlessly with X167 design language Compatibility Vehicle Generation Year Range Status Mercedes-Benz GLS X167 2020–Present Direct Fit Mercedes-Benz GL X167 2020–Present Direct Fit Mercedes-Benz GLS X166 2013–2020 Not Compatible Mercedes-Benz GL X164 / X166 Pre-2020 Not Compatible Installation DIY or Professional Setup Difficulty: Intermediate | Time: 45–90 minutes | Tools: Socket set, torque wrench, trim removal kit Remove lower trim panels on both sides to expose chassis attachment points Position running board brackets against existing factory mounting holes Insert and hand-tighten stainless steel bolts through bracket flanges Align running board with door sill and passenger entry zone; check for gaps Torque all fasteners to manufacturer spec (typically 25–35 Nm); avoid over-tightening Reinstall trim panels; test board stability by applying firm downward pressure Check alignment after 100 km of driving; re-torque if needed Note: If you lack socket tools or feel uncomfortable with fastener torque specs, professional installation is recommended. Improper tightening can cause vibration or damage to brackets. Many Mercedes specialists complete this in under an hour. Ready to Upgrade Your GLS/GL? Precision engineering meets everyday functionality. These running boards transform entry and exit while adding the polished aesthetics your Mercedes deserves. Order today and enjoy secure, confident access—no compromises. Shop Mercedes Accessories Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day guarantee – full refund, no questions ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ Expert support – +44 203 943 9919, Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or Jaguar Land Rover. Product names and vehicle designations are used solely for compatibility and identification purposes. All trademarks are the property of their respective owners.