Victorious Automotive · Land Rover Discovery 4 · Interior Trim
ABS Silver Sequin Frame Sticker — Front Row Cup Holder, Center Console · Land Rover Discovery 4 LR4 (2010–2016)
A precision-cut sequin-finish trim sticker that refreshes the front cup holder surround of your Discovery 4 centre console — no tools, no modification, just a noticeably sharper interior.
Discovery 4 / LR4
2010–2016
ABS Plastic
Silver Sequin Finish
Centre Console
Cup Holder Frame
No-Drill Install
Interior Trim
Overview
The Land Rover Discovery 4 — known as the LR4 in North America — is one of the most accomplished and characterful off-roaders ever built. Produced between 2010 and 2016, it earned a devoted following for its combination of genuine off-road capability and composed on-road manners. For owners who use theirs daily, the centre console is one of the most-touched areas of the cabin, and the original cup holder surround can begin to look tired after years of use. This trim sticker is the cleanest way to address that without lifting a single panel.
Manufactured from high-grade ABS plastic with a striking silver sequin finish, this cup holder frame sticker is precision-cut to match the front row cup holder aperture of the Discovery 4's centre console. The sequin texture catches light in a way that feels considered and purposeful — not gaudy — complementing the Discovery 4's interior design language without overwhelming it. It sits flush against the console surface, giving the impression of an OEM-quality refresh at a fraction of the cost.
Installation requires no drilling, no wiring, and no professional fitting. The sticker ships with pre-applied double-sided adhesive backing, meaning the process from unboxing to finished result takes under ten minutes. Whether you're refreshing a high-mileage workhorse or adding a finishing touch to a meticulously maintained example, this is one of the simplest interior upgrades available for the Discovery 4.
What's Included
🪟
Cup Holder Frame Sticker × 1
ABS silver sequin finish, pre-cut for Discovery 4 LR4 front row centre console
🔲
Pre-Applied Adhesive Backing
Strong double-sided tape pre-fitted to the reverse — ready to install out of the box
Product Highlights
- Precision-cut ABS plastic trim matched to Discovery 4 LR4 cup holder dimensions
- Silver sequin finish adds subtle, light-catching texture to the centre console
- Strong double-sided adhesive backing ensures a secure, long-lasting bond
- No drilling, no modification — completely reversible installation
- Resistant to everyday wear, UV exposure, and temperature fluctuations inside the cabin
- Refreshes a high-traffic area of the interior without a full console replacement
- Sits flush for a factory-fitted appearance once applied
- Lightweight ABS construction — adds no meaningful weight to the vehicle
- 100% brand new — supplied in protective packaging to prevent transit damage
- Suitable for both left-hand and right-hand drive Discovery 4 variants
Compatibility
| Vehicle |
Model Code |
Year Range |
Trim Position |
Fitment |
| Land Rover Discovery 4 |
LR4 / L319 |
2010–2016 |
Front Row Cup Holder, Centre Console |
Direct Fit |
| Land Rover Discovery 3 |
LR3 / L319 |
2004–2009 |
— |
Not Confirmed |
| Land Rover Discovery 5 |
L462 |
2017–present |
— |
Not Compatible |
| Range Rover Sport L494 |
L494 |
2013–2020 |
— |
Not Compatible |
| Range Rover Vogue L405 |
L405 |
2013–2020 |
— |
Not Compatible |
Installation Notes
Difficulty: Easy · Estimated Time: 5–10 minutes · Tools Required: None
- Begin with the centre console surface clean and completely dry. Use an isopropyl alcohol wipe on the cup holder surround area to remove any residue, dust, or finger oils — this is the single most important step for adhesion quality.
- Allow the cleaned surface to dry fully. Do not proceed while any moisture remains.
- Remove the frame sticker from its packaging and hold it against the cup holder aperture without removing the adhesive backing. Confirm alignment and fitment before committing.
- Carefully peel away the adhesive backing film, taking care not to touch the adhesive surface with your fingers.
- Align the sticker precisely over the cup holder surround and press down firmly from the centre outward. Apply sustained pressure for 30–60 seconds across the entire surface.
- Allow the adhesive to cure for at least one hour before placing items in or near the cup holders.
⚠ Note: Install in a warm environment where possible — adhesive performance is reduced in temperatures below 10°C. Avoid installing immediately after the vehicle has been parked in direct sunlight as an overheated surface can also affect bonding. If you have any doubts about fitment for your specific build date or specification, contact our team before installing.
More for Your Discovery 4
Browse our full range of interior and exterior accessories specifically curated for the Land Rover Discovery 4 LR4 — from trim upgrades to protective accessories built for owners who expect more from their vehicles.
Shop Discovery 4 Accessories
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
🚚 Worldwide shipping via DHL, FedEx, UPS & TNT
↩️ 30-day money-back guarantee
📞 +44 203 943 9919 Mon–Fri, 9am–7pm
Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.
