Victorious Automotive · Land Rover Discovery 3 · Interior Trim
ABS Chrome & Black Window Lift Switch Button Cover Stickers for Land Rover Discovery 3 LR3 (2004–2009)
A precise, peel-and-press interior upgrade that refreshes every window switch panel on your LR3 — available in Chrome, Black, and Black Wood Grain finishes.
Discovery 3 · LR3
2004–2009
ABS Material
Chrome / Black / Wood Grain
Adhesive Tape Fit
ISO9001 Certified
Interior Trim
Model LLK2841
Overview
The Land Rover Discovery 3 — known in North America as the LR3 — remains one of the most capable and characterful Land Rovers ever built. Produced from 2004 to 2009, it offered a genuinely sophisticated interior for its era, and owners who've held onto theirs know that keeping the cabin looking sharp is part of the pride of ownership. Over time, high-contact areas like window lift switch surrounds can show wear, fading, or simply begin to look dated against an otherwise well-maintained interior.
These ABS Window Lift Switch Button Cover Stickers are engineered specifically to overlay the window switch panels in the Discovery 3 cabin. Available in Chrome, Black, and Black Wood Grain, they allow you to either restore a factory-fresh appearance or subtly elevate the interior aesthetic to something more modern. The covers are moulded from durable ABS plastic, finished to a high tolerance, and backed with automotive-grade adhesive that holds firm across temperature cycles — including the kind of range the LR3 sees on real-world terrain.
Installation requires no tools, no drilling, and no modification to your vehicle. The adhesive tape backing bonds cleanly to the existing switch housing, and once seated, the covers sit flush with the surrounding trim — looking every bit like a factory detail rather than an aftermarket add-on. For LR3 owners who take their interior as seriously as their off-road capability, this is a small change with a genuinely noticeable result.
What's Included
🪟
Window Switch Cover Stickers
Full set for Discovery 3 window lift panels
🔲
Pre-Applied Adhesive Tape
Automotive-grade backing — no separate adhesive needed
📋
Installation Guide
Step-by-step fitting reference included
Product Highlights
- Precision-moulded for a flush, factory-style fit on the LR3 window switch panels
- Available in three finishes: Chrome, Gloss Black, and Black Wood Grain
- Manufactured from high-grade ABS plastic for durability and rigidity
- Pre-applied automotive adhesive tape for a clean, tool-free installation
- ISO9001 certified production — consistent quality across every unit
- Resistant to temperature variation — won't lift or bubble in heat or cold
- Covers minor scratching, fading, or wear on existing switch surrounds
- Lightweight at 200g — no impact on switch mechanism or function
- Fits all Discovery 3 / LR3 variants produced from 2004 to 2009
- Reversible upgrade — can be removed without damage to original trim
Compatibility
| Vehicle |
Code |
Year Range |
Fit |
| Land Rover Discovery 3 (LR3) |
L319 |
2004–2009 |
Direct Fit |
| Land Rover Discovery 3 — All Trim Levels |
L319 |
2004–2009 |
Direct Fit |
| Land Rover Discovery 4 (LR4) |
L319 |
2009–2016 |
Not Confirmed |
| Land Rover Discovery 5 |
L462 |
2017–Present |
Not Compatible |
| Range Rover Sport L320 |
L320 |
2005–2013 |
Not Compatible |
| Range Rover Vogue L322 |
L322 |
2002–2012 |
Not Compatible |
Installation Notes
Difficulty: Easy · Estimated Time: 15–30 minutes · Tools Required: None
- Begin with the vehicle interior at room temperature — avoid fitting in very cold or very hot conditions, as extreme temperatures can affect initial adhesive bonding.
- Thoroughly clean each window switch panel surface using an IPA (isopropyl alcohol) wipe or clean microfibre cloth. Remove any dust, oils, or residue completely and allow to dry.
- Dry-fit each cover sticker against its corresponding switch panel to confirm alignment before removing the adhesive backing.
- Peel the adhesive backing from the first cover sticker. Align carefully — starting from one edge — and press down firmly across the full surface, working out any air from the centre outward.
- Apply firm, even pressure across the entire cover for 30–60 seconds to fully activate the adhesive bond.
- Repeat for each remaining switch panel cover. Allow 24 hours for the adhesive to fully cure before heavy use.
⚠ Important: Do not apply to damp or recently cleaned (still wet) surfaces. Adhesion will be significantly compromised. Ensure all surfaces are completely dry and free of wax, polish, or silicone-based products before fitting.
Built for Discovery 3 Owners Who Care
At Victorious Automotive, we supply interior and exterior accessories exclusively for Land Rover, Range Rover, and Defender owners. Every product we carry is selected for fit, finish, and longevity — not just price. Browse our full Discovery 3 collection or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like a recommendation.
Shop All Discovery 3 Accessories
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
🔄 30-Day money-back guarantee
🌍 Worldwide shipping via DHL, FedEx, UPS & TNT
📞 Expert support Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.
