Range Rover Sport L494 MY13-20 Accessories

Victorious Automotive · Range Rover Sport L494 · Gear Selector Components 2014–2015 Range Rover Sport Shift Lever & P Range Button – OE Replacement | Part LR086213 Restore the tactile precision of your Range Rover Sport L494's gear selector with a direct-fit, OE-specification shift lever and Park button replacement built to last. Range Rover Sport L494 2014–2015 Part No. LR086213 ABS Construction Direct Fit Clip-In Install Interior Refresh Gear Selector Overview The Range Rover Sport L494, introduced for the 2014 model year, set a new benchmark for performance SUVs — blending a driver-focused cockpit with Land Rover's legendary composure on and off road. At the heart of that cabin experience is the gear selector assembly, a component you interact with every single drive. Over time, the shift lever button and P range actuator can show their age through wear, fading, cracking, or simply a loss of that satisfying click that defined the interior when the vehicle was new. This replacement Shift Lever and P Range Button is engineered as a precise drop-in solution for 2014–2015 Range Rover Sport models. Manufactured from durable ABS material and produced to OE specification, it restores the look, feel, and function of your gear selector without requiring any specialist tools or workshop visits. Part number LR086213 ensures you are receiving the correct component for your chassis generation. Whether your original button has cracked from years of use, faded under UV exposure, or simply no longer presents the premium appearance your Sport deserves, this replacement is the most efficient path back to a factory-fresh console. It is a small detail — but in a vehicle of this calibre, every detail matters. What's Included 🎛️ Shift Lever Button 1 x OE-spec replacement unit, ABS construction 🅿️ P Range Button Park selector actuator, direct-fit clip-in design Product Highlights Genuine OE-specification fitment for 2014–2015 Range Rover Sport L494 Verified part number LR086213 ensures correct vehicle match Durable ABS construction resists cracking, fading, and daily wear Clip-in installation — no tools, no adhesives, no specialist knowledge required Instantly restores a like-new appearance to the centre console gear selector Maintains the tactile response and precise action of the original button Colour-matched and contoured to the original OE component profile Lightweight yet robust — designed to withstand thousands of cycles Compatible with all trim levels of the 2014–2015 Sport L494 range Cost-effective interior refresh without dashboard or console disassembly Compatibility Model Code Year Range Fitment Range Rover Sport L494 2014–2015 Direct Fit Range Rover Sport L494 2016–2020 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: ⭐☆☆☆☆  |  Estimated Time: 5–10 Minutes  |  Tools Required: None Ensure the vehicle is parked safely with the ignition off and the gear selector in the Park position. Locate the existing shift lever button on the centre console gear selector assembly. Using your fingers or a soft trim tool if preferred, carefully apply gentle upward pressure to unclip the existing button from its housing — no force should be needed. Once the old button is free, inspect the housing for any debris or damage and wipe clean with a dry cloth. Align the new shift lever and P Range Button with the clip points on the housing, ensuring correct orientation. Apply firm, even pressure until you hear and feel the button click securely into place. Test the button action several times to confirm correct seating and function before returning the vehicle to normal use. ⚠ Please Note: Confirm your vehicle's model year and part number before installation. If the button does not clip in smoothly without force, do not proceed — contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for guidance before installation. The Right Part. The Right Fit. The First Time. At Victorious Automotive, we stock precision-matched interior components for Range Rover Sport owners who refuse to compromise on quality. Join over 12,300 verified customers who trust us to keep their vehicles looking and performing as intended. Browse Range Rover Sport L494 Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and replacement automotive components. We are not affiliated with, endorsed by, or an authorised dealer of Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model references, and part numbers are used solely for compatibility identification purposes. Always verify fitment with your vehicle's documentation before purchase.

Victorious Automotive · Range Rover & Discovery · Interior Trim Cup Holder Cover Mat Trim for Range Rover Sport, Vogue & Discovery (2005–2013) Stainless steel cup holder mats that replace tired plastic surrounds with a clean, precision-fitted upgrade — tool-free, permanent-looking, instantly effective. L320 · L322 · L319 2005–2013 Stainless Steel Tool-Free Fit Interior Trim Direct Fit Set of 2 No Modification Overview The 2005–2013 Range Rover Sport (L320), Range Rover Vogue (L322), and Discovery 3/4 (L319) were built to an exceptionally high standard — but years of daily use leave their mark on the interior, particularly in high-contact areas like the cup holders. Worn, scratched, or discoloured cup holder surrounds are one of the most common complaints from owners of this generation, and one of the easiest to address. These stainless steel Cup Holder Cover Mat Trims are precision-formed to sit cleanly inside the existing cup holder recesses, covering surface wear and immediately restoring the neat, considered appearance the interior deserves. The brushed stainless finish is understated rather than showy — it complements the factory trim rather than competing with it, which is exactly how an upgrade like this should behave. There's no drilling, no adhesive residue risk to worry about, and no specialist tools required. Each mat locates into position using the cup holder recess itself as a guide, producing a snug, rattle-free result. For any owner who takes pride in keeping their vehicle's interior looking as good as it drives, this is one of the simplest and most satisfying upgrades available. What's Included 🥂 Cup Holder Cover Mats × 2 Stainless steel, precision-formed pair for both cup holders 📄 Fitment Guide Step-by-step instruction card included in packaging Product Highlights Precision-formed stainless steel for exact cup holder fitment on L320, L322, and L319 Brushed finish that complements factory interior trim without overpowering it Covers surface scratches, scuffs, and discolouration on existing cup holder surrounds No tools required — locates securely using the existing recess geometry Rattle-free fitment thanks to snug, contour-matched profile Resistant to temperature cycling, moisture, and everyday drink spills Does not interfere with cup holder function — full drink diameter maintained Reversible upgrade — can be removed without marking the original surface Supplied as a matched pair ensuring consistent appearance across both holders Immediate visual result — full installation takes under five minutes Compatibility Model Code Years Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Vogue L322 2005–2012 Direct Fit Discovery 3 / LR3 L319 2004–2009 Direct Fit Discovery 4 / LR4 L319 2009–2016 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: ⬜⬜⬜⬜⬜ Very Easy  ·  Estimated Time: 3–5 Minutes  ·  Tools Required: None Remove any cups, bottles, or loose items from both cup holders. Wipe the cup holder recesses clean using a dry or lightly damp cloth and allow to dry fully before proceeding. Take one cup holder cover mat and orient it correctly by aligning the profile to the recess geometry — the mats are shaped to guide themselves into position. Lower the mat steadily into the cup holder recess, pressing gently around the perimeter to ensure it sits flush against all edges with no gaps or lifted sections. Repeat for the second cup holder. Both mats should sit level and stable with no movement or flex when light pressure is applied from above. Test by placing a cup or bottle in each holder to confirm full function is maintained and the mat remains in place during use. Note: Confirm your vehicle's model code and production year before ordering. Cup holder dimensions can vary between early and late production runs within the same model year — if you are unsure, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Upgrade Your Interior Today Small details define a well-kept interior. These cup holder trims are the kind of upgrade you notice every single time you get in — and so will anyone else who rides with you. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Universal Fit · Interior Storage Universal Fit Sunglasses Holder Storage Box Premium eyewear protection and organisation designed to seamlessly integrate with any vehicle interior. Universal Fit All Years Visor Mount Scratch Protection Multiple Colours Overview Sunglasses are an investment—whether you're driving your Audi through urban streets or enjoying open-road adventures. This Universal Fit Sunglasses Holder Storage Box transforms how you store and access your eyewear, eliminating the frustration of searching the glove box or dashboard while driving. Engineered for precision fit across a wide range of vehicles, this storage solution mounts directly to your visor, keeping sunglasses within arm's reach and protected from scratches, dust, and UV damage. The soft-lined interior cradles your frames while the discreet design blends naturally into your cabin aesthetic. Why it works: A dedicated storage home reduces clutter, extends eyewear lifespan, and eliminates distraction while driving. Simple one-step installation means you're organised within minutes. What's Included 📦 Storage Case Premium soft-lined sunglasses holder 📖 Instruction Manual Easy-to-follow installation guide Product Highlights Protects lenses and frames from scratches and impact Soft-lined interior preserves premium eyewear finish Mounts securely to vehicle visor Universal compatibility across vehicle models Available in multiple colours to match cabin trim Discreet profile keeps interior clean and organised Tool-free installation in under 2 minutes Keeps eyewear within reach whilst driving Reduces dashboard clutter and distraction Extends lifespan of expensive sunglasses Compatibility Vehicle Type Fit Status Notes Audi (All Models) Direct Fit Verify visor dimensions before purchase BMW (All Models) Direct Fit Standard visor mounts Mercedes-Benz (All Models) Direct Fit Compatible with most visor clips Land Rover / Range Rover (All) Direct Fit Works with standard visors Other Makes (General Auto) Direct Fit Universal mounting—check visor size Installation Installation Guide Lower your vehicle's sun visor fully Position the storage box against the visor rear panel Press firmly until the mounting clips engage securely Test by gently pulling the case to confirm it's locked Insert your sunglasses and close the lid Important: Measure your visor width and depth before installation. Most vehicles accommodate standard visors (approximately 160–200mm wide); oversized aftermarket visors may require adapter hardware (sold separately). Ready to Organise Your Cabin? Protect your eyewear investment and declutter your dashboard with this premium sunglasses storage solution. Simple installation, timeless design, and genuine functionality across any vehicle. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9★ Rated by 12,300+ Owners ✓ Worldwide Shipping via DHL, FedEx, UPS, TNT ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with Audi, BMW, Mercedes-Benz, Land Rover, Range Rover, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. Product compatibility is based on standard OEM specifications; individual vehicles may vary.

Victorious Automotive · Range Rover & Discovery · Interior Accessories Start Stop Button Cover Replacement for Range Rover & Discovery (2010–2023) A precision-fit engine start button cover that refreshes your interior's focal point with a clean, premium finish — no tools, no fuss, no compromise. 2010–2023 Range Rover Discovery Start Stop Button Premium Finish Direct Fit Easy Install Interior Upgrade Multiple Colours Overview Range Rover and Discovery owners know that the details define the driving experience. From the stitching on the seats to the finish of every switch, the cabin of these vehicles is built to a standard that demands equal attention from every aftermarket upgrade you introduce. The engine start button is one of the most-touched surfaces in the cabin — and over time, its factory finish can show the wear that daily use inevitably brings. This Start Stop Button Cover Replacement is designed specifically for Range Rover and Discovery models spanning the 2010 to 2023 model years, offering a seamless clip-over fit that sits flush over your existing button without altering its function. Available in a range of finishes and colours, it allows you to personalise your interior in a way that feels considered rather than afterthought — a subtle but immediately noticeable upgrade every time you reach for the ignition. Whether you're refreshing a tired OEM button or simply elevating your cabin's aesthetic to match your exterior specification, this cover delivers an instant visual impact with none of the complexity of a full switchgear replacement. It's the kind of detail that enthusiasts notice — and that makes all the difference. What's Included 🔘 Start Button Cover 1 × clip-over replacement cover or ring, as selected 📦 Protective Packaging Individually packaged to prevent transit damage 📋 Fitment Guide Basic installation reference included Product Highlights Precision-engineered to fit directly over your existing OEM start button Brand new and unused — supplied in original condition Constructed from premium, durable materials built to last Available in multiple finishes and colours to suit your interior spec No drilling, cutting, or specialist tools required for installation Retains full functionality of the original start stop button Covers surface wear, scratches, or fading on the original button Slim profile that sits flush and natural within the centre console Compatible with both steering-column and console-mounted button positions Ideal for daily drivers and show vehicles alike Compatibility Vehicle Generation / Code Year Range Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–2023 Direct Fit Range Rover Velar L560 2018–2023 Direct Fit Land Rover Discovery Discovery 4 (L319) 2010–2016 Direct Fit Land Rover Discovery Discovery 5 (L462) 2017–2023 Direct Fit Land Rover Discovery Sport L550 2015–2023 Direct Fit Range Rover Vogue L460 2022–2026 Verify Before Purchase Range Rover Sport L461 2022–2026 Verify Before Purchase Land Rover Defender L663 2020–2026 Verify Before Purchase Installation Notes ⚙️ Difficulty: Beginner  |  ⏱ Estimated Time: 5–10 Minutes  |  🔧 Tools Required: None Ensure the vehicle ignition is off and the engine is not running before beginning installation. Clean the existing start stop button surface using a dry microfibre cloth, removing any dust, oils, or residue. Align the cover or ring carefully over the existing button, ensuring any locating tabs or clips are correctly positioned. Apply firm, even pressure around the perimeter of the cover until you feel or hear it clip securely into place. Test the button through a full press to confirm the start stop function operates without obstruction. Step back and admire the refreshed look of your centre console — it really does make a difference. ⚠ Please Note: Confirm your exact button size and position before ordering. Start button configurations vary between model years and trim levels within the same vehicle range. If you are unsure of compatibility, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Shop the Full Range Rover & Discovery Collection Every product at Victorious Automotive is selected for owners who refuse to compromise. Explore our curated interior accessories for your specific model and build your perfect cabin upgrade. Shop Discovery 5 Accessories Shop Range Rover Vogue Accessories Ordering 2 or more items? Use code 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

```html Victorious Automotive · Audi · Connectivity Magnetic Phone Mount for All Audi Models – Premium In-Car Navigation Secure, minimalist phone holder engineered for flawless dashboard integration in any Audi or compatible vehicle. All Audi Years Universal Fit Neodymium Magnet Air Vent Mount Black Overview Whether you're navigating Audi's sophisticated dashboard or any compatible vehicle interior, this Magnetic Phone Mount delivers what serious drivers demand: rock-solid stability, uncluttered aesthetics, and zero compromise on functionality. Designed for the demanding requirements of modern motoring, it holds any smartphone securely while you focus on the road. The mount uses aerospace-grade neodymium magnets engineered to grip your phone with unwavering confidence, even on rough terrain or spirited driving. The elegant black finish integrates seamlessly into premium interiors, maintaining the refined look your Audi or comparable vehicle deserves. Installation is as straightforward as it gets—attach to your air vent in seconds, position your phone, and you're ready to drive. No drilling, no adhesive residue, no permanent modifications. This is precision engineering for those who refuse to compromise on either quality or practicality. What's Included 📱 Magnetic Phone Mount Premium black finish, universal grip Product Highlights Neodymium magnet technology ensures unshakeable phone security during acceleration and cornering Compatible with iPhone X, XS, XR, Samsung S10, S10e, Lite, and 50+ smartphone models Air vent attachment—no dashboard adhesive, no permanent modifications required Premium black construction designed for Audi and premium vehicle interiors Minimal profile maintains clean, uncluttered cabin aesthetics Supports phones weighing up to 200g without slip or drift Tool-free installation—takes under 30 seconds to fit Rotatable grip allows portrait or landscape orientation for navigation and calls Durable materials withstand extreme temperatures and UV exposure Works seamlessly with wireless charging cases and phone protection Compatibility Device Category Models Status Apple iPhone X, XS, XR, 11, 12, 13, 14, 15 (all sizes) Direct Fit Samsung Galaxy S10, S10e, S10 Lite, S20, S21, S22, S23, S24 Direct Fit Xiaomi / Redmi Redmi 4X, Note series, 12 and above Direct Fit OPPO / Huawei P30, P40, Mate series, Find X models Direct Fit Other Android HTC, OnePlus, Google Pixel, LG (up to 200g) Direct Fit Audi Vehicle Integration All Audi models and year ranges Direct Fit Installation Difficulty: Beginner | Time: 30 seconds Locate your vehicle's air vent (typically on dashboard or centre console) Ensure the vent grilles are clean and unobstructed Slide the magnetic mount's grip into the vent slats—the clips secure it instantly Angle the mounting head to your preferred viewing position Place your smartphone on the magnetic surface—it adheres immediately Adjust for portrait or landscape orientation as needed for navigation or hands-free calling Important: Test the grip with gentle upward pressure before relying on the mount while driving. Ensure your phone case is compatible with magnetic attachment (most modern cases are; metal-backed cases may reduce magnetic hold). Ready to Upgrade Your Drive? Transform your cabin with premium connectivity that matches the precision engineering of your Audi or compatible vehicle. Secure your phone, keep your hands free, and maintain the refined look you've invested in. Shop Now Use code 22GET20 for 20% off when you order any 2 items 30-Day Money Back Guarantee 4.9★ Rated (12,300+ reviews) Worldwide Shipping via DHL, FedEx, UPS Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Audi AG, Volkswagen Group, Jaguar Land Rover, or any original equipment manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners and are used for identification purposes only. ```

Victorious · Multi-Vehicle · Protection Carbon Fiber Door Sill Protector for 2010–2020 Vehicles Premium TPU protection with authentic carbon fiber styling—easy to apply, durable, and universally compatible across a decade of vehicle platforms. 2010–2020 Model Years Multi-Vehicle Compatible Premium TPU Material Carbon Fiber Effect Self-Adhesive Overview Designed for any enthusiast looking to protect and elevate their vehicle's interior and exterior trim, this Carbon Fiber Door Sill Protector offers genuine protection against scuffs, scratches, and everyday wear. Whether you're driving a 2010 model or a 2020 platform, this universal solution installs on door sills, bumpers, exterior moldings, and more—wherever protection and style intersect. Constructed from premium thermoplastic polyurethane (TPU), this protective film features a sophisticated carbon fiber aesthetic that complements modern and classic vehicle designs alike. The material is engineered for durability, resisting fading, peeling, and degradation from UV exposure and harsh weather conditions. What sets this protector apart is its versatility. Offered in four distinct sizes, you can customize coverage to suit door sills, bumpers, side moldings, or any high-impact area. The material is pre-cut, but easily shapeable—trim with precision and apply with confidence using the included self-adhesive backing. What's Included 📦 1x Protective Film Roll Pre-sized, self-adhesive TPU material ✂️ Easy Cut & Shape Trimmer-friendly for custom application areas 🎨 Carbon Fiber Finish Authentic weave pattern for premium appearance 🌍 Universal Fit Compatible with 2010–2020 vehicle range Product Highlights Premium TPU material resists UV damage and weathering Authentic carbon fiber aesthetic elevates interior and exterior design Self-adhesive backing—no additional fasteners or tools required Easy to cut and shape for precise, custom applications Protects door sills, bumpers, moldings, and trim from scuffs Four size options for versatile coverage across vehicle types Durable formula maintains appearance for years of use Non-invasive installation—no drilling, gluing, or modifications Suitable for all 2010–2020 vehicle platforms and manufacturers Professional finish—looks OEM when properly applied Size & Specification Options Size Option Dimensions Best For Size 1 5cm × 2.5 meters Full door sill coverage on multiple doors Size 2 5cm × 1 meter Single door sill or partial coverage Size 3 3cm × 2.5 meters Narrow trim and molding protection Size 4 3cm × 1 meter Accent details and bumper trim Installation Notes Difficulty Level: Beginner | Time: 15–30 minutes Prepare the surface: Clean the door sill or trim area thoroughly with soap and water. Dry completely and wipe with rubbing alcohol to remove oils and residue. Measure and mark: Hold the film against the target area. Use painter's tape to mark the edges and ensure proper alignment. Cut to size: Using a sharp utility knife or scissors, carefully trim the film to match your marked dimensions. Keep cuts clean and straight. Peel and apply: Starting at one end, slowly peel the backing and apply the film to the surface, pressing firmly as you progress to eliminate air bubbles. Set firmly: Once applied, use a soft squeegee or credit card to press the entire surface, working out any trapped air from center to edges. Allow to cure: Let the adhesive set for 24 hours before exposing the area to moisture or extreme conditions. Important: Do not apply to wet, dusty, or oily surfaces. For best adhesion and appearance, apply in temperatures above 10°C (50°F). If bubbles form during application, lift gently and re-press rather than puncturing the film. Protect Your Vehicle's Edge in Style This Carbon Fiber Door Sill Protector delivers the durability and aesthetics your vehicle deserves. Whether protecting against daily scuffs or adding a touch of modern design, this TPU film is the universal solution for any 2010–2020 platform. Add to Cart Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Money Back Guarantee ✓ 4.9/5 – 12,300+ Reviews ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All trademarks, logos, and brand names are the property of their respective owners. This product is an aftermarket accessory and is sold as-is for customization purposes.

Victorious Automotive · Range Rover Evoque L538 · Exterior Trim Land Rover Rear Tailgate Trim — Range Rover Evoque L538 (2013–2020) A precision-engineered ABS tailgate trim designed to restore, refine, and elevate the rear appearance of your Range Rover Evoque with a seamless, factory-matched finish. Evoque L538 2013–2020 ABS Plastic Rear Tailgate Exterior Trim Direct Fit No Drilling Multiple Colours Overview The Range Rover Evoque L538 is one of Land Rover's most design-led vehicles — a compact luxury SUV where every panel, surface, and detail contributes to its distinctive presence on the road. The rear tailgate, in particular, is one of the most visible surfaces, and over time its trim can suffer from UV fade, minor scuffs, or simply fall short of the sharp aesthetic Evoque owners expect. This rear tailgate trim has been developed specifically for the 2013–2020 Evoque L538 platform. Manufactured from premium-grade ABS plastic, it follows the exact contours of the tailgate surround and is available in multiple finishes to complement your vehicle's colour scheme — whether that's a gloss black accent, a body-matched panel, or a brushed silver tone. Every edge, recess, and mounting point has been replicated to deliver a fitment that feels original, not aftermarket. Installation requires no specialist tools or permanent modifications — the trim fastens via the factory mounting points already present on the tailgate. The result is an immediate upgrade that tightens the rear aesthetic, frames the tailgate cleanly, and gives your Evoque the kind of polished rear-end presence that holds up at any angle. What's Included 🔲 Rear Tailgate Trim (×1) Pre-shaped ABS panel for Evoque L538 tailgate 📋 Installation Guide Step-by-step instructions included in the box 🔩 Mounting Hardware Clips and fixings for secure, no-drill fitment 📦 Protective Packaging Foam-lined box to ensure safe delivery Product Highlights Precision-engineered for direct fitment on the Range Rover Evoque L538 (2013–2020) Constructed from high-grade ABS plastic — impact-resistant and UV-stable Available in multiple finish options to suit your vehicle's exterior colour Follows factory contours exactly for a seamless, OEM-quality appearance No drilling required — uses existing tailgate mounting points Resists warping, cracking, and discolouration in all weather conditions Enhances the rear-end aesthetic by framing the tailgate cleanly Ideal for replacing faded, cracked, or missing original trim pieces Lightweight construction — no added load on the tailgate mechanism Straightforward DIY installation achievable in under 30 minutes Compatibility Model Code Years Fitment Range Rover Evoque L538 2013–2020 Direct Fit Range Rover Evoque L551 (2021+) 2021–Present Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 5 L462 2017–2022 Not Compatible Land Rover Defender L663 2020–Present Not Compatible Not sure about your vehicle? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool (optional) Open the rear tailgate fully and clean the existing trim area thoroughly with an isopropyl alcohol wipe to remove any dirt, grease, or residue. If replacing an existing trim piece, use a plastic trim removal tool to gently unclip the old trim from its mounting points — work around the perimeter carefully to avoid cracking adjacent panels. Dry-fit the new tailgate trim to confirm alignment against all factory mounting points before final installation. Beginning from one end, press the trim firmly into position along the mounting clips, working evenly across the full length of the panel to avoid stress on any single point. Once seated, apply firm pressure across the entire trim surface to ensure all clips are fully engaged and the panel sits flush with the surrounding bodywork. Step back and inspect the fit from a distance — check for any gaps, misalignment, or raised edges before closing the tailgate. ⚠ Important: Confirm your exact Evoque model year before fitting. The L538 and L551 share a similar visual profile but have different tailgate dimensions. Always verify compatibility using your VIN or registration plate prior to installation. Built for Evoque Owners Who Don't Compromise Every product at Victorious Automotive is selected for owners who hold their vehicles to the same standard the factory intended — or higher. This tailgate trim is no different. Restore the rear-end detail your Evoque deserves. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.