Products

Victorious Automotive · Range Rover Vogue L460 / Sport L461 · Exterior Styling Wind Deflector Vents for Range Rover Vogue L460 & Sport L461 (2022–2026) Precision-fit ABS wind deflector vents engineered to complement the angular exterior language of the fifth-generation Range Rover and second-generation Sport — adding aerodynamic definition and a purposeful blacked-out finish with zero permanent modification. Range Rover Vogue L460 Range Rover Sport L461 2022–2026 ABS Plastic Gloss Black No-Drill Fit Adhesive Mount Exterior Styling ISO9001 Certified Overview The Range Rover Vogue L460 and Range Rover Sport L461 represent a significant evolution in Jaguar Land Rover's design philosophy — sharper lines, a more assertive stance, and a cabin-forward silhouette that demands equally considered exterior accessories. These are vehicles built for owners who pay attention to detail, and every visual element on them should reflect that standard. These wind deflector vents are designed from the ground up for the 2022-onwards L460 and L461 platforms. Formed from high-grade ABS plastic and finished in a deep gloss black, they integrate seamlessly with the vehicle's existing body panels — enhancing the exterior with an aerodynamically-inspired accent that looks factory-considered rather than aftermarket-added. The fitment profile has been closely matched to the bodywork geometry of both the standard Vogue and the Sport variant. Installation requires no drilling, cutting, or permanent bodywork alteration. The included professional-grade double-sided adhesive tape provides a secure, weather-resistant bond that holds confidently across motorway speeds and changing climates — making these an ideal upgrade for owners who want a clean result without workshop involvement. What's Included 🌬️ Wind Deflector Vent Set Full set matched to L460/L461 body profile 🔲 Double-Sided Adhesive Tape Pre-cut, weather-resistant, high-bond grade 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-moulded ABS plastic for exact fitment to L460 and L461 body contours Deep gloss black finish complements both standard and Black Pack exterior trims No-drill, no-cut installation — zero permanent modification to bodywork High-bond double-sided adhesive rated for outdoor and high-speed use Weather-resistant construction — UV stable, corrosion-free, rain-proof Manufactured in an ISO9001 certified production facility Lightweight design adds visual impact without affecting handling balance Aerodynamic vent profile adds a purposeful, sporty exterior accent Compatible with both the Vogue L460 and Sport L461 from 2022 onwards Reversible fitment — can be removed without leaving visible damage Compatibility Model Code Years Fitment Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2021 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  Tools Required: None Before beginning, wash and degrease the intended mounting area on the vehicle body thoroughly. Allow the surface to dry completely — any moisture or residue will compromise adhesive bond strength. Dry-fit the deflector vents against the body panels to confirm positioning and alignment. Compare carefully against the product images to ensure correct orientation for your specific model variant. Mark the intended placement lightly if needed. Peel back a small section of the adhesive backing and position one end of the deflector carefully against the body panel. Once aligned, press firmly along the full length of the deflector for a minimum of 30 seconds, applying even pressure across the entire adhesive surface. Allow the adhesive to cure for at least 24 hours before exposing the vehicle to rain, a car wash, or motorway speeds. This ensures maximum bond strength is achieved before any stress is applied. ⚠ Important: Always cross-reference the product images with your specific vehicle before committing to installation. While this product is designed for both the L460 and L461, visual confirmation prior to fitment is strongly recommended. If you are unsure of compatibility, contact our team at +44 203 943 9919 before installing. Complete Your L460 or L461 Build These deflector vents are just the beginning. Explore our full range of exterior styling accessories designed specifically for the Range Rover Vogue L460 and Range Rover Sport L461 — curated by enthusiasts, for owners who demand precision. Shop Range Rover Vogue L460 → Shop Range Rover Sport L461 → Buying two or more items? Use code below for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Toyota · Land Cruiser 250 · Interior Accessories Window Control Panel Cover — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) A precision-moulded silicone cover that shields your LC250's door switch panel from daily wear — no adhesives, no fuss, and removable for cleaning in seconds. LC250 Prado 2024–2025 High-Grade Silicone Left Hand Drive No Adhesive Tool-Free Fit Interior Protection Black Overview The Toyota Land Cruiser 250 — sold globally as the Prado LC250 — represents a significant generational step forward from its predecessor, bringing a more refined interior with cleaner lines and higher-grade surface finishes. Owners who specify the LC250 do so because they demand both capability and quality, and keeping that interior looking as it did on day one is a priority that most enthusiasts share. The window control panel is one of the most frequently touched surfaces in any vehicle cabin. Over time, repeated contact causes micro-abrasions, discolouration, and a gradual degradation of the original finish — particularly on gloss and satin trims. This silicone window control panel cover wraps precisely around the OEM switch panel, acting as a protective layer that absorbs daily contact without altering the usability of a single button. Manufactured from high-quality silicone, the cover is dimensionally accurate for the 2024–2025 Land Cruiser 250 left-hand drive configuration. It drops into place without any adhesives or tools, preserving the panel beneath in factory condition. When it needs cleaning, simply lift it off, rinse it, and refit — a level of practicality that matches the LC250's character perfectly. What's Included 🪟 Window Control Panel Cover × 1 High-grade silicone, black finish, LHD specific Product Highlights Precision fit for Toyota Land Cruiser 250 / Prado LC250 (2024–2025) High-quality silicone construction — durable, flexible, and long-lasting Protects the OEM panel surface from abrasion and daily wear No adhesives required — preserves the original panel underneath Fully removable and washable — clean in seconds, refit instantly Colour-matched black finish integrates seamlessly with factory interior Soft-touch silicone does not interfere with button operation Prevents gloss surface degradation, discolouration, and fingerprint buildup Tool-free installation — drops directly onto the existing panel Enhances the interior aesthetic while retaining full OEM functionality Compatibility Vehicle Year Range Drive Configuration Fitment Toyota Land Cruiser 250 (LC250) 2024–2025 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser Prado (LC250) 2024–2025 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (LC250) 2024–2025 Right Hand Drive (RHD) Not Compatible Toyota Land Cruiser 300 (LC300) 2021–2025 All Not Compatible Toyota Land Cruiser 200 (LC200) All Years All Not Compatible Installation Notes Difficulty: ⬜⬜⬜⬜⬜  Very Easy  ·  Estimated Time: Under 2 minutes  ·  Tools Required: None Ensure your LC250's door panel and window control area are clean and free from dust or debris before fitting. Hold the silicone cover with the button cutouts aligned to your vehicle's corresponding window and mirror switch positions. Gently press the cover down over the OEM panel, working from one end to the other to ensure even seating across the surface. Confirm each button cutout is correctly aligned and that all switches operate freely without resistance. To remove for cleaning, simply peel back from one corner and lift away — no tools or force required. ⚠ Important: This cover is designed exclusively for Left Hand Drive (LHD) Toyota Land Cruiser 250 / Prado LC250 models (2024–2025). It is not compatible with Right Hand Drive configurations. Please verify your vehicle's drive orientation before purchasing. Protect What You've Invested In Your LC250's interior is built to impress. Keep it that way from day one — this is the kind of thoughtful, low-profile upgrade that makes a lasting difference without changing a thing about how the vehicle looks or feels. Shop LC250 Interior Accessories 🏷 Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only. Please verify your vehicle's exact specification — including drive configuration and model year — prior to purchase.

Victorious Automotive · Range Rover Sport L494 · Window Visors Window Visor Vent Shades for 2014–2023 Range Rover Sport — Rain, Sun & Wind Guard Deflectors Precision-moulded side window deflectors that let you keep the windows cracked in any weather — rain, wind, or glaring sun — without compromising the Sport's refined interior environment. Range Rover Sport L494 2014–2023 High-Grade ABS Plastic No-Drill Fit Rain Deflector Wind Guard Sun Visor ISO 9001 Certified Set of 4 Overview The Range Rover Sport L494 is built for owners who demand performance without compromise — a vehicle equally at home on a motorway cruise as it is navigating demanding terrain. That same standard should extend to every accessory fitted to it. These window visor vent shades are engineered specifically for the L494 Sport's door aperture profile, sitting flush with the roofline and complementing the vehicle's aerodynamic silhouette rather than fighting against it. Crafted from high-impact ABS plastic and formed to match the exact curvature of the Range Rover Sport's door frames, these deflectors create a controlled gap that allows fresh air to circulate inside the cabin even when rain is falling. The result is a noticeably fresher interior environment, reduced fogging on cooler days, and a meaningful reduction in wind buffeting noise when windows are slightly open at speed. Unlike generic universal-fit deflectors that sit awkwardly on the glass and peel away over time, these are tailored to the Sport's door geometry and install via a secure channel-mount system that requires no drilling, no adhesive, and no modification to your vehicle. Once fitted, they present a clean, tinted finish that reads as a factory option — which is precisely the level of detail Range Rover Sport owners expect. What's Included 🪟 Front Left Visor Driver's side, pre-formed to door profile 🪟 Front Right Visor Passenger's side, mirror-matched fit 🪟 Rear Left Visor Rear door, full-length deflector 🪟 Rear Right Visor Rear door, full-length deflector 📋 Fitment Instructions Step-by-step installation guide included Product Highlights Precision-moulded to fit Range Rover Sport L494 door profiles exactly — no gaps, no overhang Deflects rain away from the window opening, keeping cabin dry with windows ajar Reduces wind buffeting noise when driving with windows cracked at motorway speeds Improves interior air circulation without exposing passengers to direct wind or rain No-drill, channel-mount installation — preserves your vehicle's factory door finish High-impact ABS plastic construction resists UV fading, cracking, and warping over time Tinted smoke finish integrates cleanly with the Sport's window line aesthetic ISO 9001 certified production process ensures consistent quality across every unit Helps reduce interior fogging in cooler, damp conditions by allowing controlled ventilation Suitable for both standard and SVR Sport variants across the full 2014–2023 model range Compatibility Vehicle Code Years Fit Range Rover Sport (Standard) L494 2014–2023 Direct Fit Range Rover Sport SVR L494 2015–2023 Direct Fit Range Rover Sport HSE / HST L494 2014–2023 Direct Fit Range Rover Sport SE / Autobiography L494 2014–2023 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2022–2026 Range Rover Sport L461, please visit our New Range Rover Sport L461 collection for compatible accessories. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Clean the door frame channel and window rubber seals on all four doors with a damp cloth. Ensure the surface is completely dry before proceeding. Lower each window fully before beginning fitment. This allows easier access to the door channel and prevents any pressure on the glass during installation. Starting at the front of the door, locate the leading edge of the visor and slide it into the upper door channel. Work gradually from front to rear, pressing the retention clips firmly into position as you go. Once seated, raise the window slowly to check that the visor does not obstruct window travel. The glass should pass smoothly without catching the visor's lower edge. Repeat for all four doors. No adhesive, drilling, or modifications to the door frame are required. ⚠ Note: Verify your exact model year before fitting. Vehicles produced in the 2022–2023 model year should be confirmed as L494 generation — not the newer L461 platform — as door profiles differ. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you fit. Built for the Range Rover Sport. Finished to Match. At Victorious Automotive, every product we list is selected for owners who care about the details. These window visors aren't an afterthought — they're a considered addition to one of the finest SUVs on the road. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Windows Control Panel Decoration Protective Cover — Toyota Land Cruiser 250 Prado 2024 A precision-fit ABS overlay that shields your LC250's window control panel from daily wear while delivering an instant interior upgrade — available in Carbon Fibre, Wood Grain, and Gloss Black finishes. LC250 Prado 2024 ABS Material LHD & RHD Carbon Fibre Wood Grain Gloss Black Paste Fit No Drilling Interior Trim Overview The 2024 Toyota Land Cruiser 250 — sold in many markets as the Prado — represents a significant step forward in cabin refinement. Its interior balances genuine utility with elevated material quality, and owners who invest in the LC250 expect every touchpoint to feel intentional and considered. The window control panel, used dozens of times a day by every occupant, is one of the first areas to show signs of wear — scuffs, discolouration, and surface scratches accumulate quickly on unprotected trim. This Windows Control Panel Decoration Protective Cover is engineered to fit the 2024 LC250 precisely, dropping directly over the factory panel without modification. Constructed from high-grade ABS thermoplastic, it adds a tactile and visual layer that complements the vehicle's existing interior language. Whether you choose the Carbon Fibre pattern for a sporting aesthetic, the Wood Grain finish for classic warmth, or the understated Gloss Black for a sleek, monochromatic look — each option is designed to feel factory-fitted rather than aftermarket. The adhesive installation system uses automotive-grade 3M-style tape backing, meaning fitment is clean, residue-free on removal, and repeatable. There are no visible fixings, no drilling, and no risk to your factory panels. For LC250 owners who take pride in maintaining a pristine cabin, this cover represents a low-effort, high-impact upgrade that pays for itself in preserved resale value alone. What's Included 🪟 Window Control Panel Cover 1 × precision-fit ABS overlay for LC250 door panel 🔲 Pre-Applied Adhesive Automotive-grade tape pre-fitted to reverse of cover 📋 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Precision-moulded for the 2024 Toyota Land Cruiser 250 / Prado door panel geometry Available in Carbon Fibre Pattern, Wood Grain, and Gloss Black finishes Compatible with both Left Hand Drive and Right Hand Drive variants High-grade ABS construction — resistant to heat, UV fading, and impact Protects factory panel from scratches, scuffs, and daily contact wear Adhesive paste installation — no drilling, cutting, or modification required Low-profile design that integrates seamlessly with OEM interior styling Fully reversible — factory panel remains undamaged beneath the cover Maintains full access to all window control switches and buttons Elevates interior appearance with a premium, purposeful finish Compatibility Vehicle Year Drive Fit Toyota Land Cruiser 250 (Prado) 2024 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (Prado) 2024 Right Hand Drive (RHD) Direct Fit Toyota Land Cruiser 300 2021–2024 LHD / RHD Not Compatible Toyota Land Cruiser 200 2008–2021 LHD / RHD Not Compatible Toyota Prado 150 Series 2009–2023 LHD / RHD Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Select the correct finish variant (Carbon Fibre, Wood Grain, or Gloss Black) and confirm your vehicle's drive orientation (LHD or RHD) before beginning. Thoroughly clean the window control panel surface using an isopropyl alcohol wipe or clean microfibre cloth. Remove all dust, oils, and residue. Allow to dry fully — this step is critical to adhesion quality. Dry-fit the cover over the panel without removing the adhesive backing. Confirm alignment with all switch apertures and panel edges before committing. Peel the protective film from the adhesive tape on the reverse of the cover. Align carefully with the factory panel, starting from one edge and pressing down progressively to avoid air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact, paying particular attention to corners and edges. Allow the adhesive to cure for a minimum of 2 hours before operating the window switches to ensure a secure, lasting bond. ⚠ Note: Do not install in temperatures below 10°C / 50°F, as cold conditions significantly reduce adhesive performance. If the cover needs to be repositioned, do so immediately before the adhesive sets fully. Attempting to reposition after curing may reduce bond strength. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser 250 interior accessories — from dashboard trim covers to gear surround overlays — all engineered to the same standard of precision fit and finish. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Toyota, Land Cruiser, Prado, and LC250 are registered trademarks of Toyota Motor Corporation.

Victorious · Toyota Land Cruiser LC300 · Interior Control Panel Decoration Protective Stickers – LC300 2021–2023 Elevate your LC300 interior with premium protective trim that combines style, durability, and precision fitment. LC300 2021–2023 Stainless Steel ABS Plastic 3 Finishes Easy Install Overview The Toyota Land Cruiser 300 demands respect. It's a machine built for purpose, engineered for adventure, and trusted by enthusiasts worldwide. Your LC300's interior deserves the same attention to detail as every other component—and this is where precision protective trim makes all the difference. Our Control Panel Decoration Stickers are engineered specifically for the 2021–2023 LC300, transforming the cabin with a refined, bespoke upgrade. Available in three distinct finishes—Black Brushed, Silver Matte, and Carbon Fiber Pattern—these stickers protect the original control panel from scratches, dust, and wear while delivering a premium aesthetic that complements both stock and modified interiors. Built from either durable Stainless Steel (A Style) or lightweight ABS Plastic (B Style), each set features precision adhesive for secure, permanent installation. Unlike cheap alternatives, our stickers are engineered to last, resist thermal stress, and maintain their finish over years of daily use. What's Included 📦 Complete Panel Set All trim pieces for full coverage 🔧 Precision Adhesive Professional-grade for secure fit 📋 Installation Guide Step-by-step instructions included Product Highlights Custom-fit design engineered for LC300 (2021–2023) Black Brushed finish for modern, understated elegance Silver Matte option for contemporary minimalism Carbon Fiber Pattern for aggressive, technical styling A Style: Premium Stainless Steel construction B Style: Lightweight ABS Plastic alternative Thermal-resistant materials withstand cabin temperature extremes Special-formula adhesive ensures permanent, bubble-free application Protects original panel from scratches, dust, and UV damage Premium finish that enhances resale value and interior appeal Compatibility & Variants Variant Style Material Colour LC300 2021–2023 A Style Premium Stainless Steel Black Brushed / Silver Matte Direct Fit B Style Standard ABS Plastic Carbon Fiber / Silver Matte Direct Fit Installation Difficulty: Beginner | Time: 30–45 Minutes Prepare the surface: Clean the control panel thoroughly with a microfiber cloth and isopropyl alcohol. Allow to dry completely for optimal adhesive contact. Position the sticker: Carefully align the decorative sticker with the panel edges, starting from the centre and working outward to avoid air bubbles. Apply with pressure: Use steady, even pressure with a soft applicator tool, working from the middle toward the edges to ensure full contact. Final inspection: Check all edges and seams for secure adhesion. Allow 24 hours of cure time before using the vehicle. Avoid moisture: Do not expose to water or humidity during the first 48 hours of installation. Important: Ensure the control panel surface is completely clean and dry before installation. Any dust or residue will compromise adhesion and finish quality. Upgrade Your LC300 Interior Today Transform your cabin with precision-engineered protective trim that elevates both aesthetics and durability. Every LC300 deserves better. Order now and experience the Victorious difference. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 stars — 12,300+ reviews 🚚 Worldwide shipping — DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover, or any other manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket enhancement only.

SPECIFICATIONSBrand Name: PartsmostCondition: NewFitment Type: Direct ReplacementHigh-concerned chemical: noneInterchange Part Number: JDE26360 T2R32248 T2R55429 T2R7588Manufacturer Part Number: DMI500010 LR137547,LR142260 LR137547 LR111378 DMI500010OEM NO.: LR111378 LR142260Origin: Mainland ChinaOther Part Number: T2R55429 JDE26360Placement on Vehicle: FRONTWarranty: 6 months New Auto Windshield Washer Fluid Low Level Sensor For Land Rover Discovery LR3 2005-2009 / Range Rover Sport 2005-2009 / Freelander LR2 / Discovery LR4 2010- / Range Rover Evoque 2012- / Discovery Sport 2015- / New Range Rover 2022- / New Range Rover Sport 2023- Jaguar F- Type2014- / E- Pace2017- OE NO.: JDE26360 T2R32248 T2R55429 T2R7588  DMI500010 LR111378 LR137547 LR142260   PRODUCT DESCRIPTION: 1) OE quality, OEM quality or aftermarket parts for your choice. 2) According to the original equipment specifications. 3) Perfect match with the original car. 4) Easy and fast installation. 5) Stable performance and high reliability.   ITEM TYPE: Windshield Washer Fluid Low Level Sensor   PART NUMBERS: LR142260 LR137547 LR111378 DMI500010 T2R7588 T2R55429 T2R32248 JDE26360 COMPATABILITY: FOR LAND ROVER DISCOVERY LR3 2005-2009 FOR LAND ROVER RANGE ROVER SPORT 2005-2009 FOR LAND ROVER FREELANDER LR2 2006-2014 FOR LAND ROVER DISCOVERY LR4 2010- FOR LAND ROVER RANGE ROVER EVOQUE 2012- FOR LAND ROVER DISCOVERY SPORT 2015- FOR LAND ROVER NEW RANGE ROVER 2022- FOR LAND ROVER NEW RANGE ROVER SPORT 2023- FOR JAGUAR F-TYPE 2014- FOR JAGUAR E-PACE 2017- (If you are not sure of the fitment, please send us your VIN number before your make the purchase. We can check for you.)   PACKAGE INCLUDED: 1 x Windshield Washer Fluid Low Level Sensor   PRODUCT PHOTOS: (Please note the packing and the sticker might be updated by the manufacturere, but the photos might not be updated at the same time. We only garantee the quality is the same!) If you find that the product images are the same as ours but without our brand logo "Partsmost", it means that other merchants have stolen our product images. Please note that if you purchase from other merchants, you will bear the risks. Aftermarket brand:   SKETCH MAP:   Technical Data Will this item fit your vehicle? - Before purchasing, please pay attention to item Technical Data and check Part Numbers. Make sure that one of these part numbers does coincide with the number of your previous part or does replace your Original Equipment Number. - Surely, in case you doubt in fitment, cannot find the number of your previous part listed in Part Numbers section, or just cannot be sure about item compatibility with your vehicle, please send us your VIN number (Vehicle Identification Number) which is on your Vehicle Registration Certificate or the lower left corner of the front windshield. We are here to assist you to check. - Let's avoid compatibility issues, returns, and get great shopping experience ever! Payment Method - You can see all payment methods available and choose the one you prefer. - If you cannot find the payment method you prefer, please contact us to get more information. - We offer combined packages shipping discount. If you purchase more than one item or in big quantity of some items, please feel free to ask us before you make payment how to save shipping cost for you. Shipping Method & Delivery Time - We usually use Standard shipping method or Simple shipping method to send goods by Free Shipping. If you have a special requirement, please contact us before you purchase. Tracking numbers will be available to be checked at www.17track.net after the packages have been shipped out. Seller's shipping method to Brazil usually refers to "Correios Brazil" and the tracking number can be checked. Delivery time is about 25 days to 45 days. - We can also use Express shipping method like e-EMS, EMS, DHL, FedEx, UPS to send goods if you need urgently, but please note that you may need to pay import duty and taxes based on the Customs policy of your country. Our selling price does NOT include any Customs charges and local charges! - If you do not want to pay import duties, please contact us, and we will check if there are any duty-free shipping methods are available to your country. NOTE: - In some remote countries like Bosnia and Herzegovina, Bolivia, Dominican Republic, South Africa etc., buyers usually can get goods within 60 natural days, but if severe Custom Invesigation happens, delivery time may extend to 100 natural days. - China Post is slower than other standard post shipping method and sometimes its delivery time is longer than 60 days, so we do NOT recommend it if you have not patience to wait for that long time. Please do NOT open any disputes for the reason of "goods still in delivery" if you choose China Post. Returns - Customers may return an item for refund or exchange within 10 days after the item is received. If return is for any quality problems, we pay return charges. If return is NOT for any quality problems, the buyer should pay return charges. Moreover, items must be returned in their original shipping method and intact packaging is required. Otherwise, you might not get full refund. - If the package is returned to us for the reason as below, the buyer need to pay for return charges if it occurs and CANNOT get a refund of the freight paid for the order. 1. After the parcel arrives at the destination country, the buyer's address, phone number, zip code is not clear and the buyer cannot be contacted; 2. The buyer did not sign and receive the package in time; 3. The buyer refused to receive the package; 4. The buyer refused to pay import duty and taxes. About us - We are a professional seller of auto spare parts for British and European car models located in China for more than 10 years, the biggest producing country. With the good quality products we have, we do competitive offer, professional service to customers all over the world. - We choose the suitable shipping way for every country those we ship to. Usually we ship out goods within 2 working days, sometimes within 3 working days during the promotion period. We give satisfy solution to any problems we meet. - We also do business of original parts and OEM brand parts to provide more alternatives for our customers. If you are also interested in them, just feel free to get a quotation from us. - We welcome wholesale orders and we can ship goods by sea, please contact us for more information. Feedbacks - Once we have received your order, a positive feedback will be automatically sent to you. Please let us to know if you have not received our feedback, we will give feedback manually. - We would also greatly appreciate if you leave us a positive feedback with 5 stars rating. - If you feel that we deserve a neutral or negative feedback, please, CONTACT US before leaving any feedback, give us a chance to make things right and leave your impression most positive!

SPECIFICATIONSBrand Name: PartsmostCondition: NewFitment Type: Direct ReplacementHigh-concerned chemical: noneManufacturer Part Number: LR037568,LR037568 LR110605OEM NO.: LR110605Origin: Mainland ChinaPlacement on Vehicle: FRONTWarranty: 6 months New Auto Windshield Washer Fluid Low Level Sensor for Land Rover Range Rover 2013- / Range Rover Sport 2014- / All New Discovery 2017-  OE NO.: LR037568 LR110605 PRODUCT DESCRIPTION: 1) OE quality, OEM quality or aftermarket parts for your choice. 2) According to the original equipment specifications. 3) Perfect match with the original car. 4) Easy and fast installation. 5) Stable performance and high reliability. ITEM TYPE: Windshield Washer Fluid Low Level Sensor PART NUMBERS: LR110605 LR037568COMPATABILITY:FOR LAND ROVER RANGE ROVER 2013-FOR LAND ROVER RANGE ROVER SPORT 2014-FOR LAND ROVER ALL NEW DISCOVERY 2017-(If you are not sure of the fitment, please send us your VIN number before your make the purchase. We can check for you.)PACKAGE INCLUDED: 1 x Windshield Washer Fluid Low Level Sensor PRODUCT PHOTOS: (Please note the packing box and the sticker might be updated by the manufacturere, but the photos might not be updated at the same time. We only garantee the quality is the same!) Aftermarket brand: SKETCH MAP: Technical Data Will this item fit your vehicle? - Before purchasing, please pay attention to item Technical Data and check Part Numbers. Make sure that one of these part numbers does coincide with the number of your previous part or does replace your Original Equipment Number. - Surely, in case you doubt in fitment, cannot find the number of your previous part listed in Part Numbers section, or just cannot be sure about item compatibility with your vehicle, please send us your VIN number (Vehicle Identification Number) which is on your Vehicle Registration Certificate or the lower left corner of the front windshield. We are here to assist you to check. - Let's avoid compatibility issues, returns, and get great shopping experience ever! Payment Method - You can see all payment methods available and choose the one you prefer. - If you cannot find the payment method you prefer,please contact us to get more information. - We offer combined packages shipping discount. If you purchase more than one item or in big quantity of some items, please feel free to ask us before you make payment how to save shipping cost for you. Shipping Method & Delivery Time - We usually use Standard shipping method or Simple shipping method to send goods by Free Shipping. If you have a special requirement, please contact us before you purchase. Tracking numbers will be available to be checked at www.17track.net after the packages have been shipped out. Seller's shipping method to Brazil usually refers to "Correios Brazil" and the tracking number can be checked. Delivery time is about 25 days to 45 days. - We can also use Express shipping method like e-EMS, EMS, DHL, FedEx, UPS to send goods if you need urgently, but please note that you may need to pay import duty and taxes based on the Customs policy of your country. Our selling price does NOT include any Customs charges and local charges! - If you do not want to pay import duties, please contact us, and we will check if there are any duty-free shipping methods are available to your country. NOTE: - In some remote countries like Bosnia and Herzegovina, Bolivia, Dominican Republic, South Africa etc., buyers usually can get goods within 60 natural days, but if severe Custom Invesigation happens, delivery time may extend to 100 natural days. - China Post is slower than other standard post shipping method and sometimes its delivery time is longer than 60 days, so we do NOT recommend it if you have not patience to wait for that long time. Please do NOT open any disputes for the reason of "goods still in delivery" if you choose China Post. Returns - Customers may return an item for refund or exchange within 10 days after the item is received. If return is for any quality problems, we pay return charges. If return is NOT for any quality problems, the buyer should pay return charges. Moreover, items must be returned in their original shipping method and intact packaging is required. Otherwise, you might not get full refund. - If the package is returned to us for the reason as below, the buyer need to pay for return charges if it occurs and CANNOT get a refund of the freight paid for the order. 1. After the parcel arrives at the destination country, the buyer's address, phone number, zip code is not clear and the buyer cannot be contacted;2. The buyer did not sign and receive the package in time;3. The buyer refused to receive the package;4. The buyer refused to pay import duty and taxes. About us - We are a professional seller of auto spare parts for British and European car models located in China for more than 10 years, the biggest producing country. With the good quality products we have, we do competitive offer, professional service to customers all over the world. - We choose the suitable shipping way for every country those we ship to. Usually we ship out goods within 2 working days, sometimes within 3 working days during the promotion period. We give satisfy solution to any problems we meet. - We also do business of original parts and OEM brand parts to provide more alternatives for our customers. If you are also interested in them, just feel free to get a quotation from us. - We welcome wholesale orders and we can ship goods by sea, please contact us for more information. Feedbacks - Once we have received your order, a positive feedback will be automatically sent to you. Please let us to know if you have not received our feedback, we will give feedback manually. - We would also greatly appreciate if you leave us a positive feedback with 5 stars rating. - If you feel that we deserve a neutral or negative feedback, please, CONTACT US before leaving any feedback, give us a chance to make things right and leave your impression most positive!

Victorious Automotive · In-Car Technology · Android Entertainment Wireless Android Auto Adapter — Plug-and-Play Dongle for Factory Wired Android Auto Systems Convert your car's factory wired Android Auto connection to fully wireless in minutes — no apps, no cables, no compromises. Android Auto Wireless Plug & Play 5GHz Wi-Fi 600+ Car Models Auto-Connect Voice Control No App Required 12-Month Guarantee Overview Modern Land Rover, Range Rover, and Defender models equipped with factory-fitted Android Auto are exceptionally capable infotainment platforms — but the requirement to plug in your phone every single journey chips away at that premium feel. A trailing USB cable across the centre console is the last thing a Range Rover Vogue or Defender owner should have to tolerate. This Wireless Android Auto Adapter is a compact, intelligent dongle that slots directly into your car's USB port and seamlessly upgrades your wired Android Auto system to a fully wireless experience. Your phone connects automatically the moment the engine starts — whether it's in your pocket, your bag, or the wireless charging pad. Navigation, calls, music, and voice control all work exactly as before, simply without the wire. Built around a 5GHz Wi-Fi module for fast, stable connectivity, the adapter requires a single initial setup and then runs entirely autonomously. It supports touch screen, steering wheel controls, knob operation, and voice commands — preserving every feature of your factory system with zero compromise to the driving experience. What's Included 📦 Wireless Android Auto Adapter The core dongle unit — compact and discreet 🔌 USB Connection Cable For connecting the dongle to your car's USB port 📄 Quick Start Guide Simple step-by-step setup instructions 🛡️ 12-Month Warranty Card Backed by dedicated after-sale support Product Highlights Converts wired Android Auto to wireless — zero cable clutter in the cabin Single initial setup — automatically reconnects every time you start the car 5GHz Wi-Fi module for fast, reliable, low-latency wireless connection Compatible with 600+ car models including Land Rover, Range Rover, and Defender Supports full Android Auto functionality — navigation, calls, music, and more Retains all control inputs — touch screen, steering wheel, knob, and voice Plug and play — no additional apps, drivers, or firmware updates required Connects even with your phone in a pocket, bag, or on a wireless charging pad Voice control fully supported via Google Assistant through Android Auto 12-month after-sale warranty with 24-hour email support response guarantee Compatibility Your vehicle must have a factory-fitted wired Android Auto system to work with this adapter. This adapter is for Android Auto only and is not compatible with Apple CarPlay systems. Vehicle Code Years Compatibility Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Defender L663 2020–2026 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Velar L560 2018–2022 Direct Fit Range Rover Evoque L551 2019–2026 Direct Fit Range Rover Evoque L538 2011–2018 Check Factory Fit Land Rover Discovery 5 L462 2017–2026 Direct Fit Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2019–2026 Direct Fit Land Rover Defender 2004–2016 Pre-2016 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Toyota Land Cruiser LC300 2021–2026 Direct Fit Toyota Land Cruiser LC250 2024–2026 Direct Fit Mercedes G-Class W463A/W464 2018–2026 Direct Fit Installation Notes ⚡ Difficulty: Easy  ·  Setup Time: Under 5 Minutes  ·  No Tools Required Ensure your vehicle has a factory-fitted wired Android Auto system. If in doubt, plug your Android phone into the car's USB port — if Android Auto launches, you're compatible. Plug the Wireless Android Auto Adapter into your car's USB port (the same port you previously used for your wired Android Auto connection). Start your engine. The adapter will power on and enter pairing mode — indicated by a solid or flashing LED on the dongle. On your Android phone, enable Bluetooth and Wi-Fi. Open the Android Auto app if it does not launch automatically. Follow the on-screen prompts to pair your phone with the adapter via Bluetooth. The adapter will then switch to a 5GHz Wi-Fi connection for full wireless operation. Once the initial pairing is complete, your phone will connect automatically every time you start the car — no further action required. ⚠ Important: This adapter is designed exclusively for Android Auto. It will not function with Apple CarPlay systems. Your vehicle must have factory Android Auto — aftermarket head unit compatibility is not guaranteed. Only one phone can be actively paired at a time; to switch to a different phone, repeat the initial pairing process. Shop by Vehicle 🚙 Range Rover L460 2022–2026 Vogue 🚙 Range Rover Sport L461 2022–2026 🚙 Defender L663 2020–2026 🚙 Discovery 5 2017–2026 🚙 Evoque L551 2019–2026 🚙 Range Rover Velar 2018–2022 Upgrade Your Drive Today Cut the cable and enjoy the seamless, premium in-car experience your Land Rover or Range Rover was always meant to deliver. Free your centre console, keep your eyes on the road, and let Android Auto connect the moment you turn the key. Shop Android Entertainment → Save 20% when you buy any 2 items — use code: 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Jaguar Land Rover (JLR), Land Rover, Range Rover, Toyota, Mercedes-Benz, or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Always verify compatibility with your specific vehicle configuration before purchase. If you have any questions, contact our team at +44 203 943 9919.

Victorious Automotive · Mercedes W222 S-Class · Connectivity Upgrades Wireless Apple CarPlay & Android Auto Adapter — Mercedes W222 S-Class (2013–2020) Bring full wireless CarPlay and Android Auto connectivity to your W222 S-Class factory screen — no permanent modifications, no compromises. W222 S-Class 2013–2020 NTG 5.0 Wireless CarPlay Android Auto Plug & Play Screen Mirroring Voice Control Bluetooth AUX Audio Overview The Mercedes-Benz W222 S-Class is one of the most accomplished luxury saloons ever produced — a vehicle built around the idea that technology and refinement should coexist seamlessly. From its air suspension to its Burmester audio system, every detail is deliberate. Yet for owners who live by Apple or Android ecosystems, the factory COMAND infotainment system — while capable — falls short of the fluid, connected experience that modern smartphones now demand. This wireless CarPlay and Android Auto interface adapter changes that entirely. Designed specifically for the W222 S-Class running Mercedes NTG 5.0, it integrates directly with your factory screen without cutting a single wire or voiding your vehicle's configuration. Once connected, your existing display becomes the home screen for Waze, Google Maps, Apple Maps, Spotify, WhatsApp, and every other app you rely on — all controlled via your car's native touchscreen, steering wheel controls, or voice command. The wireless capability is the standout feature here. Your phone connects automatically via Bluetooth the moment you enter the cabin — no cables, no fumbling, no delay. Wired USB connection is also fully supported for those who prefer it. Whether you're heading into the City or navigating cross-country, this adapter turns your W222 into the connected, intelligent machine it was always meant to be. What's Included 📦 CarPlay / Android Auto Interface Main adapter unit — plug and play fitment for NTG 5.0 🔌 USB Cable For wired phone connection and device charging 📋 Installation Manual Step-by-step guide for straightforward self-installation Product Highlights Wireless CarPlay — connects automatically via Bluetooth, no cable required Full Android Auto support, both wired and wireless modes Integrates with factory W222 screen — no permanent modifications Superior audio output via AUX integration into the factory sound system Screen mirroring for both iPhone and Android smartphones Hands-free calling and message reading via Siri or Google Assistant Supports Google Maps, Waze, Apple Maps and all major navigation apps Camera input compatibility — front, rear, and 360-degree camera support Additional USB port for simultaneous charging and media playback Multilingual interface — 15 languages including English, Arabic, German, and more Compatibility Model Years System Fitment Mercedes W222 S-Class 2013–2020 NTG 5.0 Direct Fit Mercedes C-Class (W205) 2014–2018 NTG 5.0 Direct Fit Mercedes E-Class (W213) 2016–2020 NTG 5.0 Direct Fit Mercedes A-Class (W176) 2015–2018 NTG 5.0 Direct Fit Mercedes GLE (W166) 2015–2019 NTG 5.0 Direct Fit Mercedes GLB (X247) 2019–2021 NTG 5.0 Direct Fit Mercedes CLA (C117) 2013–2019 NTG 5.0 Direct Fit Mercedes W222 S-Class (post-2020 MBUX) 2021+ MBUX Not Compatible Mercedes W222 S-Class (pre-NTG 5.0) Pre-2013 NTG 4.x Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  No Tools Required Ensure your Mercedes W222 S-Class is fitted with the NTG 5.0 COMAND system (model years 2013–2020). Check your infotainment version in the COMAND settings menu if unsure. Locate the USB and AUX ports in your vehicle's centre console or glovebox area — the adapter connects via these existing ports. Plug the interface adapter into the factory USB and AUX inputs as directed in the included installation manual. Power on your vehicle and allow the COMAND system to boot fully. The adapter interface will appear on the factory screen. On your smartphone, enable Bluetooth and pair with the adapter. For wireless CarPlay, ensure Wi-Fi is also enabled on your iPhone. Select CarPlay or Android Auto from the on-screen menu. The interface will launch on your factory display within seconds. For subsequent journeys, your phone will reconnect automatically — no manual pairing needed. ⚠ Compatibility Note: This adapter is designed exclusively for Mercedes NTG 5.0 systems. It is not compatible with the newer MBUX infotainment platform found in post-2020 S-Class models. Please confirm your system version before ordering. If you are unsure, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm). Technical Specifications Specification Detail Installation Type Plug and Play — no wiring modification required CarPlay Audio Output AUX via factory sound system Phone Connection Bluetooth (wireless) / USB (wired) iPhone Compatibility iPhone 5 and above (iOS support) Android Compatibility Android smartphones with Android Auto support Voice Control Siri, Google Assistant Camera Inputs Front, rear, 360-degree camera support Additional USB Port Charging + media playback Language Support English, Chinese, Japanese, French, Korean, Portuguese, Russian, Spanish, Thai, German, Indonesian, Turkish, Arabic, Hebrew, Ukrainian Compatible System Mercedes NTG 5.0 Upgrade Your W222 S-Class Today Wireless CarPlay and Android Auto — factory screen, zero modifications, instant connectivity. A straightforward upgrade that transforms how you interact with your S-Class every single day. Shop the W222 Adapter Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Mercedes-Benz AG, Daimler AG, or any of their subsidiaries. All vehicle model names, codes, and trademarks are used for reference and compatibility purposes only. Please verify your vehicle's infotainment system version prior to purchase. For assistance, contact our team directly.

Victorious · Range Rover Evoque · Infotainment Wireless Apple CarPlay & Android Auto for Range Rover Evoque 2013–2017 Upgrade your Evoque's factory infotainment with seamless wireless smartphone integration, navigation, and hands-free control. L538 · Evoque 2013–2017 Apple CarPlay Android Auto Wireless + USB GPS Navigation Overview The Range Rover Evoque L538 deserves infotainment that matches its refined design and capable nature. This factory-integrated wireless CarPlay and Android Auto system replaces the limitations of your standard entertainment unit with a modern, smartphone-centric interface—all while retaining your original screen and steering wheel controls. Connection is effortless: pair via Bluetooth and Wi-Fi for true wireless functionality, or use USB for wired connectivity and simultaneous charging. Your iPhone's Siri voice control activates with "Hey Siri," allowing complete hands-free operation of calls, messages, navigation, and music. Android users enjoy the same seamless integration with Google Assistant. The system mirrors your phone's navigation apps—Apple Maps, Google Maps, Waze—with live traffic data. Stream music from Spotify, Apple Music, Amazon Music, and others through your factory speakers. Optional aftermarket camera integration (360° views with dynamic guidelines) transforms parking and reversing. A powerful, adjustable EQ lets you tailor audio to your preference. Home/Back button instantly returns to the original Range Rover interface if needed. What's Included 📱 Wireless CarPlay Module Bluetooth & Wi-Fi enabled 🔌 USB Connection Cable Wired mode + charging support 📍 GPS Navigation Ready Maps, Waze, live traffic 🎚 Equaliser Control Pop, Rock, Soft, Standard presets 📖 Installation Manual Step-by-step printed guide 🎥 Camera-Ready Interface Front, rear, 360° compatible Product Highlights Wireless pairing via Bluetooth & Wi-Fi; USB fallback mode included Apple CarPlay & Android Auto fully integrated into factory screen Hands-free voice control with Siri & Google Assistant Live GPS navigation: Apple Maps, Google Maps, Waze all supported Stream Spotify, Apple Music, Amazon Music through factory speakers Optional aftermarket camera integration (360° & dynamic lines) Powerful adjustable EQ with multiple audio presets Full steering wheel & control knob compatibility—original buttons work Phone charging via USB port; USB media playback also available One-button return to factory interface (Home/Back button) Compatibility Model Year Range Status Range Rover Evoque L538 2013–2017 Direct Fit Range Rover Evoque L551 (2018+) 2018–Present Not Compatible Other Range Rover models Various Not Compatible Pre-Purchase Check: Verify that your Evoque's AUX input is activated or that the armrest box has an AMI interface. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if unsure. Installation Difficulty Level: Intermediate | Time: 1–2 hours Disconnect the negative battery terminal for safety. Remove the dashboard trim panels around the factory infotainment unit using trim removal tools (included with many aftermarket kits, or available separately). Carefully disconnect the factory unit's power, ground, and antenna connectors. Install the new CarPlay module in the designated location (typically behind or integrated with the factory screen mount). Connect the power harness to the vehicle's ACC and Ground circuits; connect antenna to the module. Route the USB connection cable to your preferred mounting location (cup holder, armrest, or centre console). Reinstall dashboard trim panels, ensuring all clips and screws are secure. Reconnect the battery terminal and power on the vehicle. Pair your smartphone via Bluetooth in the system menu, then test wireless and USB connectivity. Calibrate EQ settings and verify steering wheel controls respond correctly. Note: Installation may void your factory warranty. We recommend professional fitment by a qualified Land Rover technician if you are unfamiliar with vehicle electrical systems. A printed step-by-step manual is included; refer to it and contact support if you encounter any issues. Ready to Elevate Your Evoque's Infotainment? Transform your Range Rover Evoque L538 with wireless CarPlay and Android Auto. Enjoy seamless navigation, hands-free calls, and premium audio control—all while keeping your eyes on the road and your hands on the wheel. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent specialist retailer and is not affiliated with Land Rover, Jaguar Land Rover plc, or any of their subsidiaries. Land Rover, Range Rover, Evoque, and related marks are registered trademarks of Jaguar Land Rover Limited. This product is designed for compatibility with the specified models and is sold as an aftermarket accessory. Installation may affect your vehicle's manufacturer warranty. Always consult your vehicle's handbook and a qualified technician before installation.

Porsche · Boxster 2010–2016 · Infotainment Upgrade Wireless Apple CarPlay Adapter for Porsche Boxster 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full smartphone mirroring to your Porsche Boxster's factory PCM3.1 screen — no head unit replacement required. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Aluminium Housing Overview The Porsche Boxster is a driver's car in every sense — precise, communicative, and deeply rewarding. But for all its engineering brilliance, the PCM3.1 infotainment system found in 2010–2016 examples was never designed with modern smartphone integration in mind. Navigation felt dated, music playback was cumbersome, and hands-free calling was far from seamless. This Wireless Apple CarPlay adapter plugs directly into your Boxster's existing PCM3.1 architecture and unlocks a completely transformed in-car experience. Using your car's native display and original controls, you gain full access to wireless Apple CarPlay, wired CarPlay, Android Auto, and Android Mirroring — without touching your factory head unit or voiding your setup. Designed as a true plug-and-play module, the adapter communicates via CAN-Bus, preserving your steering wheel controls and original button layout. Installation requires no cutting or splicing — it simply slots into place, making it as clean as it is capable. Whether you're navigating via Waze, streaming Spotify, or simply taking a call hands-free with Siri, this adapter makes every drive measurably better. What's Included 📦 CarPlay Adapter Module PCM3.1 compatible, aluminium housing 🎙️ External Microphone Dedicated mic for hands-free calls 🔌 Wiring Harness Direct-fit CAN-Bus connector 🔩 Mounting Hardware Includes screws for Sirius Radio fitments 📄 Installation Guide Step-by-step fitment instructions Product Highlights Wireless Apple CarPlay — no cable needed once paired Wired Apple CarPlay also supported for stable connections Android Auto compatibility for Google-ecosystem users Android Mirroring to cast your phone screen directly Siri voice control for fully hands-free operation Original steering wheel controls remain fully functional Supports aftermarket front and reverse cameras Offline media playback via USB flash drive (up to 32GB) Airplay and Android Mirror-linking for HD video streaming Plug-and-play CAN-Bus integration — no head unit swap required Compatibility Model Years System Fitment Boxster 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Cayman 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any Porsche with CD-AUX button — Non-PCM3.1 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Confirm your Boxster's PCM system has a NAVI button on the control panel. If your car features a CD-AUX button instead, this adapter is not compatible — please contact us before ordering. If your vehicle has Sirius Satellite Radio installed, contact us prior to ordering — we will include the additional screws needed to accommodate this fitment. Remove the factory PCM3.1 unit following standard Porsche trim removal procedures (no cutting or permanent modification required). Connect the adapter's CAN-Bus harness to the factory wiring loom using the included plug-and-play connector. Route and secure the dedicated external microphone — this replaces the original mic, as the factory microphone is integrated with the SOS emergency system. Reassemble the trim, power on the system, and follow the on-screen pairing guide to connect your iPhone or Android device. ⚠ Important: A dedicated external microphone is included and must be used. The factory microphone is integrated into Porsche's SOS emergency system and cannot be repurposed for CarPlay calls without compromising that functionality. Upgrade Your Porsche. Drive Smarter. Victorious Automotive brings you premium in-car technology upgrades trusted by enthusiasts worldwide. Rated 4.9/5 stars from over 12,300 verified reviews — and backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx / UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All manufacturer names, model designations, and trademarks are used solely for fitment reference purposes. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC.

Porsche · Cayenne PCM3.1 · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayenne 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full mirror-linking to your Porsche PCM3.1 system — with zero permanent modifications and plug-and-play simplicity. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Hands-Free Calling iOS & Android Aluminium Housing Overview The Porsche Cayenne built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — a capable unit for its era, but one that was never designed for the smartphone-connected world we now live in. Navigation has moved on, streaming music is the norm, and hands-free communication is an expectation rather than a luxury. This adapter bridges that gap entirely. This PCM3.1 CarPlay retrofit module slots directly into your existing head unit via the Can-Bus interface, preserving your original steering wheel controls and factory buttons while unlocking wireless Apple CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. There's no cutting of wires, no permanent alterations, and no compromise to your vehicle's existing functionality — just a clean, professional upgrade that feels like it should have been there from day one. Whether you're routing through Waze, streaming Spotify, making a hands-free call via Siri, or monitoring a reversing camera feed, this adapter handles it all through the screen you already have. The aluminium housing keeps heat dissipation efficient, and with iOS 9 or above supported — including all current iPhone models — compatibility is essentially universal. What's Included 📦 CarPlay Adapter Module PCM3.1-specific retrofit box, aluminium housing 🔌 Can-Bus Interface Harness Plug-and-play vehicle connection loom 🎙️ Dedicated Microphone Included to preserve SOS/factory mic compatibility 📡 Wireless Bluetooth Receiver For wireless iPhone pairing without USB 🔧 Mounting Hardware Installation screws and fixings included 📋 Installation Guide Step-by-step instruction sheet Product Highlights Wireless Apple CarPlay — connect iPhone without a cable via Bluetooth pairing Wired Apple CarPlay also supported for stable, low-latency connection Android Auto compatible — full Google Maps, Assistant & media access Android screen mirroring for full device display on the factory screen Original steering wheel controls fully retained via Can-Bus integration Supports front and reverse aftermarket camera feeds Siri voice control for hands-free navigation, calls, and messaging Offline video and music playback via USB flash drive (up to 32GB) HD video streaming via Airplay and Android Mirror-Link Supports Sirius Satellite Radio vehicles — contact us for fitment screws Compatibility Model Years System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Vehicles with CD-AUX button (no NAVI) Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Fit Recommended Confirm your PCM head unit has a NAVI button on the control panel before beginning. If your vehicle only has a CD-AUX button, this product is not compatible. Remove the centre console trim panels to access the back of the PCM3.1 unit — refer to your vehicle-specific trim removal guide. Connect the Can-Bus interface harness from the adapter module to the corresponding port on the rear of the PCM3.1 unit. Route and connect the dedicated microphone to the adapter module, positioning it near the A-pillar or overhead console for best call quality. Secure the adapter module in a suitable location behind the dash using the included mounting hardware, ensuring adequate ventilation. Refit all trim panels, power on the vehicle, and follow the on-screen pairing instructions to connect your iPhone wirelessly via Bluetooth. ⚠ Important: If your vehicle is fitted with Sirius Satellite Radio, please contact us before installation. We will include the specific additional screws required to ensure a clean, secure fit. A dedicated microphone is included in the box as the factory microphone is integrated with the OEM SOS system and cannot be reused. Upgrade Your Porsche. No Compromise. Join over 12,300 verified customers who've transformed their driving experience with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop All Upgrades Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used for compatibility identification purposes only. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC. Always verify compatibility with your specific vehicle configuration before purchase.

Porsche · Cayman · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayman 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay, Android Auto, and full mirror-linking into your Porsche Cayman's factory PCM3.1 system — no head unit swap, no permanent modifications. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Plug & Play iOS 9+ Aluminium Housing 12V Siri Voice Control Overview The Porsche Cayman built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — capable for its era, but without the native smartphone integration that modern driving demands. Whether you're navigating unfamiliar roads, streaming music, or simply keeping your phone out of your hand, the absence of CarPlay is a daily frustration for many Cayman owners. This PCM3.1 Wireless Apple CarPlay Adapter is engineered specifically for Porsche's factory system architecture. It integrates directly into your existing head unit, retaining all original controls — steering wheel buttons, screen, and interface logic — while adding full wireless Apple CarPlay, Android Auto, and Android Mirror-linking capability. There is no requirement to replace your factory system or drill any new holes. Designed as a true plug-and-play solution, the adapter connects via the factory harness and communicates over CAN-Bus, meaning it works seamlessly with your car's electronics. Once paired, your iPhone connects automatically every time you get in — no cable, no fuss. Siri voice control, real-time navigation, hands-free calling, Spotify, Waze, and more are all available at a touch or a word. What's Included 📦 CarPlay Adapter Module PCM3.1-specific, aluminium housing 🔌 Wiring Harness Factory-matched CAN-Bus connection 🎙️ External Microphone Required — replaces factory SOS-integrated mic 📡 Bluetooth Antenna Enables wireless iPhone pairing 🔧 Mounting Hardware Including screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step printed instructions Product Highlights Wireless Apple CarPlay — iPhone connects automatically via Bluetooth, no cable required Wired CarPlay also supported for maximum stability when preferred Full Android Auto compatibility for Google Maps, Spotify, and more Android Mirror-linking to cast your Android screen to the factory display Retains all original steering wheel and dashboard button controls Siri voice control for completely hands-free operation while driving Supports aftermarket and OEM reverse or front camera integration Offline video and music playback via USB flash drive (up to 32GB) Airplay support for wireless HD video streaming from iOS devices Plug-and-play CAN-Bus integration — no permanent modifications to your Porsche Compatibility This adapter is designed for Porsche vehicles fitted with the PCM3.1 infotainment system. Compatibility requires a NAVI button on the control panel. Vehicles with a CD-AUX button only are not supported. Model Years System Fit Cayman 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit Boxster 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any model with CD-AUX only Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes Confirm your vehicle has a NAVI button on the PCM3.1 control panel before beginning installation. Power down the vehicle and remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Locate the factory harness connector on the rear of the head unit and connect the supplied wiring harness from the adapter module. Mount the adapter module in a suitable location behind the dashboard, ensuring adequate ventilation and no pinched cables. Route and connect the supplied external microphone to a discreet location on the A-pillar or sun visor area. Reinstall the head unit and trim panels, then power on the vehicle to verify the system initialises correctly. Pair your iPhone via Bluetooth — subsequent connections will be fully automatic and wireless. ⚠ Important: If your Porsche is equipped with Sirius Satellite Radio, additional mounting screws are required. Please notify us at the time of ordering and we will include them at no charge. The supplied external microphone must be used — the factory microphone cannot be retained due to its integration with the Porsche SOS emergency system. Upgrade Your Drive Your Porsche Cayman deserves a connected cockpit. This wireless CarPlay adapter brings modern smartphone integration to your PCM3.1 system without compromising the factory look or feel. Shop This Adapter Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model references, and trademarks are used for fitment identification purposes only. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended where required.

Victorious Automotive · Porsche Macan · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche Macan 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay and Android Auto to your Porsche Macan's factory PCM3.1 system — plug-and-play, no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Porsche Macan Plug & Play Siri Voice Control Camera Support Steering Wheel Control iOS & Android Overview The Porsche Macan (2010–2016) equipped with the PCM3.1 infotainment system is a driver's machine — precise, purposeful and beautifully engineered. But its factory connectivity falls short of what today's drivers expect. Native Apple CarPlay or Android Auto simply wasn't available at the time of manufacture, leaving owners relying on outdated Bluetooth audio or cable workarounds that feel out of place in a car of this calibre. This PCM3.1 wireless Apple CarPlay adapter resolves that entirely. Engineered specifically for Porsche's factory head unit, it integrates seamlessly behind the scenes — no screen replacement, no head unit swap, no permanent wiring changes. Once installed, your existing PCM3.1 display becomes a fully functional CarPlay and Android Auto interface, accessible wirelessly from your iPhone the moment you get in the car. Steering wheel controls continue to function as expected, original buttons retain their factory behaviour, and a dedicated microphone is included to preserve safe hands-free calling — since the factory microphone is tied to Porsche's SOS system. This is the clean, factory-grade upgrade your Macan deserves. What's Included 📦 CarPlay Adapter Module PCM3.1-specific interface box 🎙️ Dedicated Microphone For hands-free calls, replaces SOS-integrated mic 🔌 Wiring Harness Direct plug-in, no splicing required 🔧 Mounting Hardware Includes screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step instructions included 🖥️ USB Cable For wired CarPlay connection option Product Highlights Wireless Apple CarPlay — no cable needed, connects automatically via Bluetooth Wired Apple CarPlay support also available for maximum stability Android Auto compatibility for all major Android smartphones Android screen mirroring for full device display on PCM3.1 Siri voice control for safe, hands-free operation while driving Original steering wheel and factory PCM buttons remain fully functional Front and reverse aftermarket camera support built in Airplay and Android mirror-linking for HD video streaming USB flash drive playback for offline music and video True plug-and-play installation — no permanent vehicle modifications Compatibility Model Years System Fitment Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Porsche Models with CD-AUX Button Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic trim tools, screwdrivers Confirm your Porsche's control panel has a NAVI button — this adapter requires PCM3.1 with NAVI functionality. If your vehicle has a CD-AUX button instead, this unit will not be compatible. Remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Disconnect the factory connectors carefully. Connect the included wiring harness to the rear of the factory PCM3.1 unit and to the adapter module — no wire cutting or permanent modification is required. Fit the dedicated microphone in a discreet location near the driver (sun visor or A-pillar area recommended) and route the cable tidily behind trim panels. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation — additional screws will be dispatched to ensure correct fitment. Refit the PCM3.1 unit and all trim panels. Power on the vehicle and pair your iPhone or Android device via Bluetooth to activate wireless CarPlay or Android Auto. Important: The factory microphone in PCM3.1-equipped Porsche models is integrated with the vehicle's SOS emergency system. This adapter includes a separate microphone to maintain hands-free calling functionality without disrupting the SOS system. Always use the supplied microphone. Upgrade Your Porsche's Connectivity Join over 12,300 satisfied customers who've transformed their driving experience with Victorious Automotive. Every order ships worldwide via DHL, FedEx, UPS or TNT — and is backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 🚚 Worldwide Shipping · DHL / FedEx / UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG, Apple Inc., or Google LLC. Apple CarPlay and Android Auto are trademarks of their respective owners. All product names and vehicle references are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase. Installation should be carried out by a qualified technician where appropriate.

Victorious Automotive · Porsche Panamera · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Panamera (2010–2016) – PCM 3.1 Bring full wireless Apple CarPlay and Android Auto to your 2010–2016 Porsche Panamera PCM 3.1 system — plug-and-play fitment, zero permanent modification. Porsche Panamera PCM 3.1 2010–2016 Wireless CarPlay Android Auto Plug & Play Siri Voice Control Reverse Camera Support Android Mirroring Aluminium Housing Overview The Porsche Panamera built between 2010 and 2016 came equipped with Porsche Communication Management 3.1 — a competent system for its era, but one that predates the smartphone integration that modern driving demands. If you've grown accustomed to using Apple Maps, Waze, Spotify, or hands-free calling through CarPlay in other vehicles, returning to PCM's native interface can feel like a step back. This wireless Apple CarPlay adapter is engineered specifically for the PCM 3.1 platform found across the 2010–2016 Panamera lineup. It connects directly into the existing architecture of your Porsche's infotainment system without replacing the head unit, preserving all OEM functionality while layering in full wireless CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. Your Porsche retains its factory look — there are no aftermarket screens, no cut wires, and no evidence of modification. The adapter communicates with your iPhone via Bluetooth for the initial pairing handshake, then switches automatically to a stable Wi-Fi connection for full wireless CarPlay performance. Steering wheel controls, the PCM NAVI button, and your original microphone circuit all remain functional — with a dedicated replacement microphone included to maintain hands-free call quality since the OEM unit shares circuitry with the SOS system. What's Included 📦 PCM 3.1 CarPlay Module Main adapter unit, aluminium housing, silver finish 🎙️ Replacement Microphone For hands-free calling, bypasses SOS-integrated OEM mic 🔌 Vehicle Harness Cable Direct-connect loom for PCM 3.1 interface 🔩 Mounting Hardware Includes additional screws for Sirius Satellite Radio-equipped vehicles 📄 Installation Guide Step-by-step printed instructions 💾 USB Flash Support Play offline media directly via USB input (up to 32GB) Product Highlights Wireless Apple CarPlay — connect via Bluetooth + Wi-Fi, no USB cable needed Wired Apple CarPlay also supported for maximum stability preference Android Auto compatibility for Google Maps, Assistant, and media apps Android screen mirroring for full phone display on PCM screen Original PCM steering wheel and dashboard button controls retained Siri voice control for safe, hands-free iPhone interaction Supports aftermarket front and reverse cameras via camera input AirPlay and Android Mirror-Link for HD video and music streaming USB Flash Drive playback for offline video and music without internet Plug-and-play installation — no permanent modification to OEM wiring Compatibility Model Year Range PCM Version Fitment Panamera 2010–2016 PCM 3.1 Direct Fit Cayenne 2010–2016 PCM 3.1 Direct Fit Macan 2010–2016 PCM 3.1 Direct Fit Cayman 2010–2016 PCM 3.1 Direct Fit Boxster 2010–2016 PCM 3.1 Direct Fit 911 / 991 2010–2016 PCM 3.1 Direct Fit 718 2010–2016 PCM 3.1 Direct Fit Any model with CD-AUX button (no NAVI) — Non-PCM 3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Confirm your Porsche PCM has a NAVI button on the control panel. If only a CD-AUX button is present, this adapter will not function — do not proceed. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation. We will include specific supplementary screws required for your configuration. Remove the PCM 3.1 head unit from the dash using appropriate trim removal tools — take care not to damage surrounding trim panels. Disconnect the OEM wiring harness from the rear of the PCM unit and connect the supplied adapter harness in-line between the PCM and the vehicle loom. Route and connect the replacement microphone to the adapter — do not reconnect the original OEM microphone, as it shares circuitry with the vehicle's SOS emergency system. Secure the CarPlay module in an accessible cavity behind the dash. Ensure no pinched cables before refitting the head unit. Refit the PCM unit, power up the vehicle, and follow the on-screen pairing instructions to connect your iPhone via Bluetooth for the initial wireless CarPlay setup. ⚠ Important: The original factory microphone must not be reused. It is integrated with the Porsche SOS emergency call system. The included replacement microphone provides equivalent call quality without interfering with safety systems. Driven by Detail. Built for Enthusiasts. At Victorious Automotive, every product we list is selected because it genuinely improves the ownership experience. If you have questions about fitment, PCM version, or installation for your specific Panamera, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop All In-Car Technology Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification. Apple CarPlay® is a registered trademark of Apple Inc. Android Auto™ is a trademark of Google LLC.

Premium Infotainment · Porsche PCM 3.1 · 2010–2016 Wireless Apple CarPlay for Porsche PCM 3.1 Transform your Porsche's factory infotainment with seamless wireless CarPlay and Android Auto integration. PCM 3.1 Compatible 2010–2016 Wireless + Wired Steering Wheel Control Camera Support Hands-Free Siri Overview Built for Porsche owners who demand connectivity without compromise. This wireless CarPlay system integrates directly into your PCM 3.1 head unit, replacing the factory interface while preserving all original controls and functionality. Simply connect your iPhone or Android phone via Bluetooth or USB, and instantly access Apple Maps, Spotify, Waze, Google Maps, and phone controls through the factory touchscreen and steering wheel buttons. No adaptation period. No compromises. This is the upgrade Porsche Cayenne, Macan, 911, Panamera, Boxster, and Cayman owners have been waiting for—modern smartphone integration that respects your car's design and your driving experience. What's Included 📱 Wireless CarPlay Module Plug-and-play integration 🎛️ Full Button Control OEM steering wheel integration 🎤 Dedicated Microphone For Siri and hands-free calls 📸 Camera Support Ready Rear/front/360 compatible 🔌 USB + Bluetooth + AUX Triple connection option 📖 Installation Manual Step-by-step guide included Key Features Wireless Apple CarPlay — Bluetooth pairing; no cable required Wired CarPlay Mode — USB connection for iOS devices Android Auto & Mirroring — Full Android platform support GPS Navigation — Google Maps, Waze, Apple Maps with live traffic Streaming Audio — Apple Music, Spotify, Amazon through factory speakers Siri Voice Control — Hands-free operation; "Hey Siri..." activation OEM Controls Intact — Steering wheel buttons and control knob fully functional Professional EQ — Adjustable equalizer (Pop, Rock, Soft, Standard presets) USB Media Playback — Direct music and video from external drives Factory Integration — Retains original PCM interface; press Home to return anytime Compatibility Porsche Model Year Range Status Cayenne 2010–2016 Direct Fit Macan 2010–2016 Direct Fit 911 / 991 2010–2016 Direct Fit Panamera 2010–2016 Direct Fit Boxster / Cayman / 718 2010–2016 Direct Fit Important: Before ordering, confirm your car has a "NAVI" button on the control panel. If your car has "CD-AUX" button instead, this system is not compatible. If you have Sirius Satellite Radio installed, contact us—we'll provide additional hardware. Installation Difficulty: Intermediate | Time: 45–60 minutes Power down your vehicle and disconnect the negative battery terminal (safety first). Remove the PCM 3.1 head unit from the dashboard using the provided removal keys or plastic pry tools. Disconnect the factory harness and locate the USB port connections behind the unit. Connect the wireless CarPlay module to the USB port and secure harness connections to the factory connectors. Reinstall the PCM unit into the dashboard and reconnect the battery terminal. Power on the system and perform the initial Bluetooth pairing with your smartphone. Test all functions: CarPlay, steering wheel controls, microphone, and factory buttons. Fine-tune EQ settings to your preference using the onscreen menu. Note: This system includes a dedicated microphone to maintain safety features. The original factory microphone cannot be reused due to integrated SOS emergency functionality. Full installation instructions are provided in the box. Ready to Upgrade Your Porsche? Say goodbye to dated infotainment. This wireless CarPlay system brings your PCM 3.1 into the modern era while preserving the authentic Porsche driving experience. Seamless integration. Full smartphone control. Your way. Add to Cart Use code 22GET20 for 20% off when ordering 2+ items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping — DHL, FedEx, UPS, TNT ✓ Expert support — +44 203 943 9919 Have questions? Call our team Mon–Fri, 9am–7pm GMT at +44 203 943 9919, or email support@victorious.shop. We're here to help you get the most out of your Porsche. Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Porsche AG, Porsche Cars North America, Inc., Jaguar Land Rover Limited, or their subsidiaries. All product names, logos, and brands are the property of their respective owners. Product fitment and compatibility are subject to individual vehicle specification and condition. We recommend professional installation. Victorious Automotive assumes no liability for installation errors or vehicle damage resulting from improper use or installation. Please verify vehicle specifications before purchase.

Victorious Automotive · Porsche PCM3.1 · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche PCM3.1 — Cayenne, Macan, Panamera, 911 & More (2010–2016) Bring full wireless Apple CarPlay, Android Auto, and mirror-linking to your Porsche PCM3.1 system — plug-and-play fitment with no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Cayenne Macan Panamera 911 / 991 Boxster / 718 Cayman Plug & Play Siri Voice Control Overview Porsche's PCM3.1 infotainment system was an engineering benchmark when it launched, but a decade on, the absence of Apple CarPlay leaves it feeling dated against modern expectations. Navigation has moved on, streaming is standard, and seamless iPhone integration is now something drivers rightly expect from a car of this calibre. This Wireless Apple CarPlay Adapter is engineered specifically for Porsche PCM3.1-equipped vehicles built between 2010 and 2016. It slots cleanly behind the factory head unit and communicates via the existing CAN-Bus interface, meaning your original display, steering wheel controls, and physical buttons all continue to function exactly as Porsche intended — you simply gain a significant layer of modern connectivity on top. Whether you're connecting wirelessly over Bluetooth for CarPlay, mirroring your Android device, or connecting a front or reverse camera, this adapter handles it all without voiding the original system or leaving visible traces of the installation. It's the upgrade Porsche should have offered from the factory. What's Included 📦 CarPlay Adapter Module PCM3.1-specific hardware unit 🔌 CAN-Bus Harness Plug-and-play wiring loom 🎙️ External Microphone Replaces SOS-integrated OEM mic 📡 Bluetooth Antenna For wireless iPhone pairing 🔧 Installation Hardware Screws and mounting brackets 📄 Installation Guide Step-by-step instruction manual Product Highlights Wireless Apple CarPlay — connect your iPhone automatically without a cable Wired Apple CarPlay also supported via USB for added reliability Full Android Auto compatibility for Google Maps, Waze and more Android screen mirroring for multimedia and app streaming Original steering wheel controls fully retained and functional CAN-Bus integration preserves all factory PCM3.1 features Supports front and reverse aftermarket cameras Siri voice control for safe, hands-free iPhone interaction Hands-free calling with the included dedicated microphone USB flash drive playback for offline video and music libraries Compatibility Model Year Range System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit PCM3.1 with CD-AUX button Any PCM3.1 variant Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes Confirm your PCM3.1 unit has a NAVI button on the control panel — this is required for activation. Units with only a CD-AUX button are not supported. Remove the factory head unit trim and carefully extract the PCM3.1 module to access the rear connectors. Connect the supplied CAN-Bus harness between the adapter module and the existing PCM3.1 wiring plugs. Route and secure the included external microphone to your preferred location on the A-pillar or overhead console. If your vehicle is equipped with Sirius Satellite Radio, contact us before installation — we will supply additional fixing screws to accommodate the alternate mounting arrangement. Reassemble the trim, power on the vehicle and follow the on-screen pairing prompt to connect your iPhone via Bluetooth. Important: The included external microphone must be used in place of the factory microphone. The original OEM microphone is integrated with the vehicle's SOS emergency system and cannot be shared with the CarPlay adapter. The supplied microphone replicates all hands-free calling functions independently. Upgrade Your Porsche Today Join over 12,300 satisfied owners who've transformed their driving experience with Victorious Automotive. Questions before you buy? Call our specialists on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS 🔁 30-day money-back guarantee 📞 Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used solely for fitment identification purposes. PCM is a registered trademark of Porsche AG.

Victorious Automotive · Mercedes G-Class · Infotainment Upgrade Wireless Apple CarPlay Upgrade Kit for Mercedes C/E/B/G Class NTG4.5/4.7 Seamless wireless Apple CarPlay and Android Auto integration—no factory screen replacement needed. NTG4.5 / NTG4.7 2011–2013 Wireless CarPlay Android Auto OEM Integration Overview This retrofit CarPlay system transforms your Mercedes C-Class, E-Class, B-Class, or G-Class (2011–2013 with NTG4.5/4.7 systems) into a modern connected cabin—without replacing your factory screen. Using the existing 7-inch or 8.4-inch display, you gain full wireless connectivity via Bluetooth and Wi-Fi, plus optional USB wired mode for charging and stability. Whether you're navigating with Google Maps, Waze, or Apple Maps, playing Spotify, or taking calls hands-free via "Hey Siri," everything you need is at your fingertips. The system retains full OEM button control, steering wheel integration, and the ability to switch back to your original interface in one tap. Your car stays authentic; your tech moves forward. Perfect for owners who want modern smartphone integration without the cost and hassle of factory head unit replacement. Compatible with AUX-activated or AMI interface systems, this kit slots seamlessly into your existing architecture. What's Included 📦 Wireless CarPlay Module Connects to your vehicle's AUX/AMI interface 🔌 USB Connection Cable Optional wired mode + device charging 📖 Installation Manual Step-by-step English instructions included ⚡ Multi-Protocol Support Apple CarPlay, Android Auto, AirPlay, Mirroring-Link Product Highlights Wireless CarPlay via Bluetooth and Wi-Fi connectivity Optional USB wired connection for stability and charging Full GPS app support: Google Maps, Waze, Apple Maps Music streaming: Apple Music, Spotify, Amazon Music, Tidal "Hey Siri" hands-free voice control integration Android Auto and AirPlay Mirroring compatibility Front, rear, and 360-degree camera support with guidance lines Advanced equalizer for personalised audio tuning Retains all OEM steering wheel and button controls One-tap switch back to factory interface via Home/Back button Compatibility & Screen Support Vehicle Model Year Range Screen Size Compatibility Mercedes C-Class (W204) 2011–2013 7" / 8.4" Direct Fit Mercedes E-Class (W212) 2011–2013 7" / 8.4" Direct Fit Mercedes B-Class (W246) 2011–2013 7" / 8.4" Direct Fit Mercedes G-Class (W463) 2011–2013 7" / 8.4" Direct Fit Pre-2011 or Post-2013 Models Before 2011 / After 2013 Any Not Compatible Vehicles without AUX/AMI Interface Any Any Not Compatible Installation & Setup Difficulty Level: Intermediate | Time: 45–60 minutes Verify AUX Activation: Check your vehicle settings to ensure AUX input is enabled in the infotainment system. If not, activate via the main menu or consult your manual. Locate AMI Interface: Open your centre console armrest box and locate the AMI (AUX Music Interface) connector or AUX input socket. Connect the Module: Plug the wireless CarPlay module into the AMI interface or AUX input. Secure with included fasteners if necessary. Power Connection: Route the power cable to your car's 12V accessory outlet or existing AUX power feed. Use the provided USB adapter if needed. Pair via Bluetooth: On your iPhone or Android device, search for the module in Bluetooth settings and pair. Follow the on-screen prompts to enable CarPlay/Auto. Test Navigation & Audio: Launch Google Maps or Apple Maps, play a music app, and verify all controls respond via your steering wheel and dashboard buttons. Adjust Equalizer (Optional): Fine-tune audio output using the built-in EQ settings via the module's menu. ⚠ Important: AUX must be activated in your vehicle before installation. Some models may require dealer activation or a software update. If you're unsure, consult your Mercedes manual or contact us at +44 203 943 9919 for pre-installation verification. Why Victorious Automotive? We specialise in premium, thoughtfully engineered upgrades for discerning vehicle owners. This CarPlay kit respects your Mercedes' original design while bringing it into the modern connected age—no expensive OEM replacements, no compromise on functionality. We've tested this module across NTG4.5 and NTG4.7 systems to ensure flawless integration and reliability. Every kit ships worldwide via DHL, FedEx, UPS, or TNT with full tracking. Your 30-day money-back guarantee means zero risk. And with our 4.9/5 star rating from 12,300+ verified buyers, you're buying from a team that genuinely cares about your drive. Ready to Upgrade? Transform your 2011–2013 Mercedes into a connected driving hub. Wireless CarPlay, Android Auto, hands-free Siri—all without touching your original screen. Order today and drive smarter tomorrow. Add to Cart Use code: 22GET20 for 20% off any 2 items 🌍 Worldwide Shipping ⏳ 30-Day Money Back 📞 Expert Support Mon–Fri 9am–7pm ⭐ 4.9 Stars | 12,300+ Reviews Disclaimer: Victorious Automotive is an independent accessory supplier and is not affiliated with, endorsed by, or authorised by Mercedes-Benz, Daimler AG, or any affiliated company. Product names and brands mentioned are the property of their respective owners. This product is designed for use on compatible vehicles as specified and is not a factory replacement or OEM component. Installation may require professional support. Always verify vehicle compatibility before purchase.

Victorious · Land Rover / Jaguar · Infotainment Wireless Apple CarPlay & Android Auto for Land Rover Discovery Sport & F-Pace Upgrade your factory infotainment with wireless smartphone integration, navigation apps, and seamless OEM control. Discovery Sport L550 F-Pace X761 Discovery 5 L462 2015–2023 Wireless + Wired Apple CarPlay Android Auto Overview Your Land Rover Discovery Sport, F-Pace, or Discovery 5 deserves infotainment that keeps pace with modern smartphone apps. Land Rover InControl has limitations: no Spotify, Waze, Google Maps, or WhatsApp integration. This wireless Apple CarPlay and Android Auto module breaks through those constraints, giving you the apps and navigation you rely on while maintaining full OEM steering wheel and touchscreen control. This retrofit Android box integrates seamlessly into your factory display. Switch between the Land Rover interface and your preferred smartphone ecosystem by pressing NAV or Home—no permanent changes, full reversibility. Wireless CarPlay via Bluetooth and WiFi, wired CarPlay via Lightning cable, or Android Mirroring via USB Link. Add aftermarket front, rear, or 360° cameras with dynamic guidance lines. Control music, navigation, and voice commands through Apple Siri or your vehicle's steering wheel buttons. Built for Discovery Sport (L550), F-Pace (X761), and Discovery 5 (L462) owners who demand modern connectivity without sacrificing the reliability and refinement of their Land Rover or Jaguar. What's Included 📦 Android Box Module Wireless CarPlay & Android Auto unit 🔌 USB Dongle Android Mirroring & wired CarPlay adapter 📡 WiFi & Bluetooth Wireless connectivity for all devices 🔊 Advanced EQ Customisable audio profiles (Pop, Rock, Soft, Standard) Key Features Wireless Apple CarPlay via Bluetooth & WiFi pairing Wired CarPlay via Lightning cable connection Android Mirroring via USB Link & dongle Google Maps, Waze, Apple Maps with live traffic Spotify, Apple Music, Amazon Music via factory speakers Voice control with Siri integration Support for aftermarket 360° cameras with dynamic guidance USB media playback (music & video files) Full steering wheel button compatibility One-touch toggle between Land Rover & smartphone interface Compatibility Vehicle Model Year Range Status Land Rover Discovery Sport 2015–2023 Direct Fit Jaguar F-Pace 2015–2023 Direct Fit Land Rover Discovery 5 2017–2023 Direct Fit Range Rover Sport L494 2013–2020 Check AUX/AMI Range Rover Vogue L405 2013–2020 Check AUX/AMI Important: Before ordering, confirm your vehicle has an active AUX input or an AMI (Aston Martin Interface) connection in the armrest storage box. This module requires compatible audio routing to function correctly. Installation & Setup Difficulty: Intermediate | Time: 60–90 minutes Prepare. Gather the module, USB dongle, and documentation. Identify the AUX or AMI connector in your armrest storage box or beneath the centre console. Power down. Turn off the ignition and disconnect the negative battery terminal for 30 seconds to reset the infotainment system. Connect audio. Locate the AUX or AMI connector and plug the module's audio input cable. Route cables neatly behind the trim panel to avoid pinching or heat exposure. Secure the box. Mount the Android box in a location with adequate airflow (typically above or below the infotainment unit). Use supplied brackets or adhesive pads. USB dongle setup. For wired Android Mirroring or CarPlay, connect the USB dongle to the module and route the cable to the front-facing USB port of your vehicle. Bluetooth pairing. Power the module. On your iPhone or Android phone, search for the module's Bluetooth ID and pair. For wireless CarPlay, ensure WiFi is enabled on both the module and your phone. Test navigation. Open Google Maps, Waze, or Apple Maps. Confirm touchscreen and steering wheel controls work. Toggle between Land Rover and smartphone interfaces using the NAV or Home button. Audio calibration. Adjust the equaliser settings (Pop, Rock, Soft, Standard) to your preference using the on-screen menu. Camera setup (optional). If adding aftermarket cameras, connect them to the module's camera inputs. Enable dynamic guidance lines in settings. Reconnect battery. Restore the negative terminal. Perform a full system reset by holding the power button for 10 seconds. Test all functions. Note: If your vehicle does not have an active AUX or AMI interface, this module will not function. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) to verify compatibility before installation. Elevate Your Infotainment Stop settling for limited factory navigation and music apps. Bring wireless CarPlay, Android Auto, and your favourite apps into your Discovery Sport, F-Pace, or Discovery 5 with plug-and-play ease. Full steering wheel control. Zero loss of OEM functionality. Shop Discovery Sport Shop Discovery 5 Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ 4.9★ from 12,300+ reviews ✓ Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar, or JLR. Land Rover®, Jaguar®, Discovery®, F-Pace®, and Range Rover® are registered trademarks of Jaguar Land Rover Ltd. All product names and specifications are for reference only.

Premium Tesla Accessories Wireless Car Charger for Tesla Model 3 Fast, hands-free 10W wireless charging seamlessly integrated into your Model 3 centre console. Model 3 2017–2024 Wireless Charging 10W Dual Mode Stainless Steel Overview The Tesla Model 3 is engineered for precision and efficiency, and your interior deserves accessories that match that standard. This Wireless Car Charger integrates seamlessly into your centre console, delivering professional-grade charging without the clutter of cables or the distraction of hand-held mounting. With 10W dual-mode output, intelligent Foreign Object Detection, and automatic temperature management, this charger keeps your smartphone powered throughout your journey. The stainless steel core with premium thermoplastic silicone coating ensures durability and a refined aesthetic that complements Model 3 interiors perfectly. Whether you're commuting or road-tripping, this charger delivers reliable, fast power to any compatible Qi-enabled device—freeing your attention for the road ahead. What's Included ⚡ Wireless Phone Charger 10W dual-mode unit with FOD & temperature control 📍 Mounting Tape Pre-cut adhesive for secure centre console installation 🔌 USB Separators (×2) Organise cable management and routing 📖 User Manual Installation, troubleshooting, and safety guidelines Product Highlights 10W wireless dual-mode output for rapid, versatile charging Intelligent Foreign Object Detection (FOD) safeguards your device Real-time LED charging status indicator Automatic thermal management prevents overheating Stainless steel core for durability and premium finish Thermoplastic silicone rubber coating ensures enhanced stability Perfect fit for Model 3 centre console cavity Hands-free operation for safer driving Compatible with all Qi-enabled smartphones No metallic objects or interference required Compatibility & Fitment Model Year Range Fitment Tesla Model 3 2017–2024 Direct Fit Tesla Model 3 Performance 2017–2024 Direct Fit Tesla Model Y 2020–2024 Not Compatible Tesla Model S 2015–2024 Not Compatible Installation Guide Installation Overview Difficulty: Easy | Time Required: 10–15 minutes | Tools: None (tape mounting) Power off your Tesla and open the centre console lid carefully. Clean the console surface with a dry, lint-free cloth to ensure tape adhesion. Remove the backing from the pre-cut mounting tape. Align the Wireless Car Charger with the console cavity and press firmly for 30 seconds. Route the USB cable through the console to your 12V or USB power source. Use the included USB separators to organise cable runs neatly. Allow the adhesive to set for 2 hours before placing devices on the charger. Place your Qi-enabled phone on the charger—the LED will confirm charging status. Important: Do not place metallic objects (keys, coins, metal phone cases) on the charging pad during use. This may trigger Foreign Object Detection and interrupt charging. Ensure the charger is installed on a clean, dry surface for optimal adhesion. Specification Sheet Specification Detail Output Power 10W per charging side (20W total) Charging Modes Dual-mode wireless fast charging Core Material Stainless steel Surface Coating Thermoplastic silicone rubber Foreign Object Detection Yes (FOD intelligent protection) Temperature Control Automatic thermal management Status Indicator LED charging status light Vehicle Fit Tesla Model 3 centre console (2017–2024) Device Compatibility All Qi-enabled smartphones Installation Tape-mount (no drilling required) Complete Your Model 3 Interior Keep your phone charged, your hands free, and your attention on the road. Designed for Tesla owners who demand clean lines and seamless integration. Shop Wireless Charger Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ verified reviews 🛡️ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS 📞 UK Support +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Tesla Inc., Elon Musk, or any Tesla subsidiary. Tesla and Model 3 are registered trademarks of Tesla Inc. All references are for fitment and compatibility purposes only. Product images and descriptions are property of Victorious Automotive. Always verify fitment with your vehicle's year, trim, and region before purchase.

Victorious Automotive · Range Rover Velar · Wireless Charging Wireless Car Charger Panel for Range Rover Velar 2017–2019 A factory-style Qi wireless charging panel engineered specifically for the Range Rover Velar, delivering up to 10W fast charging with zero cables and a completely clean finish. Range Rover Velar 2017–2019 Qi Wireless QC 3.0 10W Fast Charge Direct Fit Hidden Wiring Anti-Slip Rubber 3-Coil Design Overview The Range Rover Velar was designed from the outset as a vehicle where form and function exist in complete harmony. Its minimalist interior — stripped of unnecessary clutter and defined by clean horizontal lines — deserves accessories that respect that philosophy. This wireless charging panel was developed with exactly that in mind: a direct-fit replacement tray that slots precisely into the Velar's centre console, as if it were always there. Built to the QC 3.0 standard and equipped with a three-coil Qi layout, this charger eliminates the frustration of charging blind spots. Whether you set your phone down squarely or slightly off-centre, charging initiates immediately. Output flexes automatically between 10W, 7.5W, and 5W depending on your device, ensuring iPhones, Samsung Galaxy handsets, and a wide range of other Qi-enabled smartphones receive the fastest charge their hardware supports. Beneath the surface, a built-in anti-magnetic cooling sheet protects both the charger and your device during extended use, while the anti-slip rubber mat keeps your phone seated firmly even on unmade roads or sharp bends. A subtle colour signal light confirms charging status at a glance — discreet enough to suit the Velar's cabin, but clear enough to be useful. All wiring routes cleanly behind the panel, leaving absolutely no loose cables in sight. What's Included 🔌 Wireless Charging Panel Direct-fit tray for Range Rover Velar 2017–2019 🔧 Wiring Harness Connects to OEM cigarette lighter or USB port 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Anti-Magnetic Sheet Built-in cooling and magnetic interference protection Product Highlights Precision-moulded direct-fit design for Range Rover Velar 2017, 2018 & 2019 Three-coil Qi layout eliminates charging blind spots across the entire pad surface Supports up to 10W fast charging for Samsung, 7.5W for Apple, and 5W universal QC 3.0 standard — intelligent power delivery matched to your device Built-in anti-magnetic cooling sheet for safe, stable long-duration charging Advanced anti-slip rubber mat keeps your device secure at all times Discrete colour signal light confirms charging status without distraction Full hidden wiring — no exposed cables, no compromised centre console aesthetics Original-style OEM appearance — blends seamlessly with Velar interior design Wide operating temperature range: −30°C to +80°C — suitable for all climates Technical Specifications Parameter Specification Process Standard Vehicle / Automotive Grade Input Voltage 9V – 16V DC Power Output 10W / 7.5W / 5W (auto-adaptive) Charging Frequency 110 kHz – 205 kHz Charging Efficiency >70% Operating Temperature −30°C to +80°C Wireless Standard Qi (3-Coil) Quick Charge Standard QC 3.0 Device Compatibility Brand Compatible Models Status Apple iPhone iPhone 8, 8 Plus, X, XS, XS Max, XR Direct Fit Samsung Galaxy S6, S6 Edge, S6 Edge+, S7, S7 Edge, S8, S8+, S9, S9+, S10, S10+, S10e, Note 5, Note 8, Note 9 Direct Fit Google Pixel / Nexus Nexus 4, 5, 6, 7 / Pixel 3, Pixel 3 XL Direct Fit LG G2, G3, G6, G6+, V30, V30s ThinQ Direct Fit Nokia Lumia 820, 830, 920, 925, 928, 929, 930, 1020, 1520 / Nokia 7 Plus, 8 Sirocco Direct Fit Motorola Moto 360, Moto X Pro, Moto Mini, Droid 5 Direct Fit Apple AirPods All generations Not Supported Non-Qi Devices Phones without native wireless charging Requires Receiver Phones without built-in Qi wireless charging can be supported with the addition of a separately purchased wireless receiver adapter. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Ensure your Range Rover Velar is switched off before beginning. Confirm your vehicle is a 2017, 2018 or 2019 model year to verify direct fitment. For straightforward installations, locate the OEM cigarette lighter or USB port beneath the centre console and connect the wiring harness directly — no panel removal required. For a fully concealed hidden-wire installation, carefully remove the centre control tray panel using appropriate trim removal tools to avoid scratching surrounding surfaces. Route the wiring harness to the rear of the cigarette lighter socket and establish a secure connection. Tuck all excess cabling neatly into the cavity. Press the new wireless charging panel firmly into position. The precision-moulded housing should seat flush with the surrounding trim with no gaps or movement. Restore power to the vehicle, place a compatible device on the pad, and confirm the charging signal light illuminates. ⚠ Note: Steps requiring removal of the centre control panel are best carried out by a professional automotive technician to avoid damage to surrounding trim or wiring. Metal objects such as coins, IC cards, or bank cards placed between your phone and the charging surface will interrupt charging. Phone cases up to 4mm thick are generally compatible; thicker cases may reduce charging speed. Explore More Velar Accessories This wireless charging panel is just one of many precision upgrades available for the Range Rover Velar. Browse the full Velar collection at Victorious Automotive to find interior enhancements, protection accessories, and styling upgrades designed specifically for your vehicle. Shop All Range Rover Velar Accessories → Upgrade Your Velar. Zero Compromise. Victorious Automotive supplies premium accessories to Range Rover owners across the world. Every product is selected for quality, fitment accuracy, and respect for your vehicle's original design intent. Shop Range Rover Velar Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and vehicle model references are used for fitment identification purposes only. Vehicle trademarks remain the property of their respective owners.

AOSRRUN · JAGUAR · INTERIOR UPGRADE Wireless Car Charger for Jaguar F-Pace, XE & XF (2016–2019) Keep your device charged on every drive with seamless wireless charging, engineered for modern Jaguar sedans and SUVs. Jaguar F-Pace Jaguar XE Jaguar XF 2016–2019 Wireless Qi Charging ABS Construction Direct Fit Overview Jaguar's F-Pace, XE, and XF represent some of the most refined luxury vehicles on the road—crafted for drivers who demand both performance and convenience. Whether you're navigating city streets in an XE, commanding the road in an XF, or exploring beyond the tarmac in an F-Pace, one thing remains constant: the need to keep your smartphone charged and within arm's reach. The AOSRRUN Wireless Car Charger integrates seamlessly into your Jaguar's interior, offering Qi-certified wireless charging without the clutter of cables. Simply place your compatible device on the charging pad—there's no pairing, no learning curve, no fumbling with connections. The charger is engineered in precision ABS plastic, finished to match Jaguar's premium trim standards, and delivers reliable power for all major smartphone platforms. This is a direct-fit upgrade for model years 2016 through 2019, spanning the entire F-Pace X761 SUV range, XE X760 sedan lineup (Pure, R-Sport, S, Premium, Prestige, and 2019 variants), and XF X260 sedans and Sportbrake models. Installation is straightforward, taking approximately 15 minutes with no modifications to your vehicle's electrical system. What's Included ⚡ Wireless Charging Pad Qi-certified, 10W output 🔌 Power Harness Direct clip to factory harness 🛠️ Installation Hardware Trim rings, clips, fasteners 📖 Step-by-Step Guide Illustrated with vehicle-specific notes Product Highlights Qi-certified wireless charging—no proprietary adapters needed ISO9000 certified design and manufacturing ABS composite construction for durability and finish quality Fits all F-Pace X761 (2015–2019), XE X760 (2015–2019), and XF X260 (2015–2019) models 10W fast-charging output for iPhones, Samsung, and all Qi-compatible devices Factory-matched trim ring—blends seamlessly into your cabin No modification to electrical wiring required Compact footprint—minimal dashboard/console intrusion Cool-touch surface—prevents overheating in direct sunlight 5-year manufacturer warranty included Compatibility Model Years Fit Jaguar F-Pace (X761) 2015–2019 Direct Fit Jaguar XE (X760) 2015–2019 Direct Fit Jaguar XF (X260) Sedan 2015–2019 Direct Fit Jaguar XF Sportbrake (X260) 2017–2019 Direct Fit Other Jaguar models All years Not Compatible Installation Difficulty: Intermediate | Time: 15–25 minutes Disable the vehicle's ignition and allow the cabin to cool for 10 minutes. Remove the center console trim panel using the provided trim tool (gently pry at marked seams). Locate the factory power distribution point beneath the console—it's pre-wired for accessories. Connect the charger's power harness to the factory harness using the locking connector (one-way design; it only fits correctly). Position the charging pad in the designated console cavity and secure using the included clip fasteners. Apply the factory-matched trim ring around the perimeter of the pad—it should sit flush with the surrounding surface. Reinstall the center console trim panel, checking that all clips are seated. Reconnect the vehicle battery, start the engine, and test the charger (you'll see a blue LED indicator). ⚠ Note: Do not force the power connector. If it doesn't slide in smoothly, it may be rotated 180°. The correct orientation is self-evident once aligned. Ready to Upgrade Your Jaguar? The AOSRRUN Wireless Charger transforms your F-Pace, XE, or XF into a modern charging hub. No more cables. No more fumbling. Just clean, seamless wireless power every time you drive. Shop Now Use code 22GET20 to save 20% on any two items. ⭐ 4.9/5 stars from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 Call us: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Jaguar Cars, or any official Jaguar entity. All vehicle references are for fitment compatibility only. Please verify fitment with your vehicle's documentation before purchase.

Victorious Automotive · Audi A1 · Infotainment Upgrade Wireless CarPlay & Android Auto Adapter for Audi A1 2012–2018 MMI 2G/3G Retrofit wireless Apple CarPlay and Android Auto directly into your Audi A1's factory MMI system — no screen replacement, no complex wiring, no compromise. Audi A1 2012–2018 MMI 2G / 3G Wireless CarPlay Android Auto Plug & Play Siri Voice Control Rear Camera Support Model: WJAU-3 Android OS Bluetooth Overview The Audi A1 built between 2012 and 2018 ships with Audi's MMI 2G or 3G infotainment architecture — a solid system for its era, but one that predates the wireless connectivity that modern drivers expect as standard. If you've grown accustomed to seamless iPhone or Android integration and find yourself reaching for a phone mount instead of using your dashboard, this adapter was built precisely for you. This wireless CarPlay and Android Auto retrofit adapter integrates directly with your A1's existing MMI hardware via a clean plug-and-play connection. There's no need to swap your head unit, cut cables, or void your factory setup. The adapter leverages your car's existing screen, controls, and steering wheel buttons — making the upgrade feel factory-fitted rather than bolted on. Beyond CarPlay and Android Auto, the adapter runs a full Android operating system, opening up YouTube, Netflix, Spotify, Waze, and more through Airplay and mirror-linking. USB flash drive support adds offline media playback, and rear or front camera compatibility makes it a genuinely comprehensive infotainment upgrade for a car that deserves better than its original spec. What's Included 📦 CarPlay Adapter Module WJAU-3 unit, model-specific for Audi MMI 2G/3G 🔌 Plug-and-Play Harness Factory-connector compatible wiring loom 📡 Wireless Antenna For stable wireless phone pairing 🎥 RCA Camera Input Supports aftermarket front or rear cameras 📋 Installation Guide Step-by-step setup instructions included 🔧 Mounting Hardware All fixings required for clean installation Product Highlights Wireless Apple CarPlay — connect your iPhone without a cable Android Auto & Android Mirror-Linking support built-in Real-time GPS navigation via Google Maps, Waze, and Apple Maps Siri voice control fully functional through factory microphone Hands-free calling via Bluetooth with OEM audio output Stream YouTube, Netflix, and Spotify via Airplay or mirroring Offline video and music playback via USB flash drive Supports aftermarket front, rear, or 360-degree cameras via RCA Steering wheel control retention — no button remapping needed Plug-and-play install into existing MMI 2G/3G — no head unit swap Compatibility Model Year Range MMI System Fitment Audi A1 2012 – 2018 MMI 2G / 3G Direct Fit Audi Q3 2012 – 2018 MMI 2G / 3G Direct Fit Audi A1 (Pre-2012) Before 2012 Non-MMI Not Compatible Audi A1 (Post-2018) 2019 onwards MIB2 / MIB3 Not Compatible Other Audi Models Various MMI 2G / 3G Verify Before Purchase ⚠ Compatibility Note: This adapter is designed specifically for vehicles fitted with Audi MMI 2G or MMI 3G systems. If you are unsure which MMI version your vehicle has, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Remove the MMI head unit from the Audi A1 dashboard using appropriate trim removal tools. Take care not to damage surrounding trim panels. Locate the factory MMI connector at the rear of the head unit. The adapter harness connects directly here — no splicing or cutting required. Route the adapter module to a suitable location behind the head unit or within the centre console void, ensuring adequate ventilation. If connecting an aftermarket camera, run the RCA cable to the desired camera location at this stage before reassembling trim. Reconnect the factory MMI connectors through the adapter harness, then reinstall the head unit into the dashboard. Power on the vehicle and follow the on-screen pairing instructions to connect your iPhone or Android device wirelessly via Bluetooth and Wi-Fi. Test steering wheel controls, audio output, navigation, and camera feed before completing the installation. ⚠ Important: Always disconnect the vehicle's battery negative terminal before working on infotainment or electrical components. If you are not confident with automotive electrical work, we recommend professional installation to protect your vehicle's warranty and avoid unintended faults. Upgrade Your Audi A1's Infotainment Join over 12,300 verified customers who trust Victorious Automotive for precision-fit vehicle upgrades. Worldwide delivery via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop Infotainment Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or associated with Audi AG, Volkswagen Group, Apple Inc., or Google LLC. All brand names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Audi Q3 · Infotainment Upgrade Wireless CarPlay & Android Auto Adapter for Audi Q3 2012–2018 MMI 2G/3G Transform your Audi Q3's original MMI system into a fully connected, wireless CarPlay and Android Auto hub — with zero screen replacement required. Audi Q3 · 2012–2018 MMI 2G / 3G Wireless CarPlay Android Auto Plug & Play Siri Voice Control Rear Camera Support Model: WJAU-3 Android OS Bluetooth Overview The Audi Q3 — built between 2012 and 2018 — was designed with Audi's signature MMI interface, which was ahead of its time but now falls short of the seamless smartphone connectivity that modern drivers expect. Whether your Q3 is running MMI 2G or 3G, the factory system simply wasn't engineered for wireless CarPlay, Android Auto, or the streaming services that define how we use our phones on the road today. This wireless CarPlay adapter for the Audi Q3 is a purpose-built retrofit solution that integrates directly into your existing MMI unit via the factory interface — no screen swaps, no invasive wiring, no loss of your original controls. Running on a dedicated Android platform with 1GB RAM and 8GB ROM, it operates independently of your phone's processing power, delivering a consistently smooth, responsive experience across Apple CarPlay, Android Auto, iOS Airplay, and Android Mirror-Linking. Once connected, you gain access to real-time navigation via Google Maps or Waze, hands-free calling, Siri voice control, Spotify, YouTube, Netflix, and full USB media playback — all displayed on your factory MMI screen and controlled through the original MMI dial and buttons. For Q3 owners who want genuine smart connectivity without compromising the factory aesthetic, this is the definitive upgrade. What's Included 📦 CarPlay Adapter Module Model WJAU-3 · Android OS · 1GB RAM / 8GB ROM 🔌 Factory MMI Interface Harness Direct plug-in for MMI 2G & 3G systems 📡 Wireless Antenna For stable wireless CarPlay & Android Auto pairing 🎥 RCA Video Input Cable Supports aftermarket front or rear camera feed 🖥️ USB Flash Port Supports offline media playback up to 8GB 📋 Installation Guide Step-by-step setup instructions included Product Highlights Wireless Apple CarPlay — no USB cable needed once paired Wireless Android Auto & full Android Mirror-Linking Real-time navigation via Google Maps, Waze, and Apple Maps Siri & Google Assistant voice control, fully hands-free iOS Airplay for screen mirroring from iPhone or iPad Streams YouTube, Netflix, and Spotify over Wi-Fi or hotspot Supports aftermarket front, rear, and 360° camera inputs via RCA Offline video & music playback via USB flash drive (up to 8GB) Steering wheel control compatibility retained via factory interface Plug-and-play design — preserves original MMI look and feel Compatibility Model Year Range MMI System Fitment Audi Q3 2012 – 2018 MMI 2G Direct Fit Audi Q3 2012 – 2018 MMI 3G Direct Fit Audi A1 2012 – 2018 MMI 2G / 3G Direct Fit Audi Q3 (F3) 2019 – Present MIB3 / MIB4 Not Compatible Audi Q3 without MMI 2012 – 2018 No MMI fitted Not Compatible ⚠ Unsure of your MMI version? Check your MMI unit's version number in the settings menu under "System Information," or contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. We're happy to confirm compatibility for your specific vehicle. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Carefully remove the MMI control panel surround using a trim removal tool to avoid scratching the dash. Locate the factory MMI harness connector at the rear of the unit and disconnect it from the head unit. Connect the adapter's harness to the factory MMI plug, then reconnect to the head unit — the adapter sits inline between the two. Route the wireless antenna to a discreet location with line-of-sight to the cabin (above the headliner or behind the trim panel). If using a rear or front camera, connect the RCA video cable to the corresponding camera output. Refit the MMI surround trim, power on the vehicle, and follow the on-screen pairing instructions to connect your phone via Bluetooth or Wi-Fi. On first use, accept the CarPlay or Android Auto prompt on your phone. Subsequent connections are automatic and wireless. ⚠ Important: Ensure your vehicle's ignition is fully off before beginning installation. Do not force any connectors — the MMI harness is keyed and will seat correctly without excessive pressure. If you are not confident working with in-car electronics, we recommend professional installation. Upgrade Your Audi Q3 Experience Your Q3 deserves more than a seven-year-old infotainment experience. This adapter brings genuine wireless connectivity to your factory MMI — no compromise, no clutter, no cutting corners. Shipped worldwide via DHL, FedEx, UPS, and TNT, and backed by our 30-day money-back guarantee. Shop More Infotainment Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🚚 Worldwide Shipping · DHL · FedEx · UPS · TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Audi AG, Volkswagen Group, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious · Range Rover Vogue/Sport · Interior Tech Wireless Phone Charger for Range Rover Vogue & Sport (2013–2017) Premium wireless charging integrated seamlessly into your cubby—zero clutter, constant power, perfect fit. L405 / L494 2013–2017 Wireless Qi Charging Non-Slip Mat ACC Power Plug & Play Overview For Range Rover Vogue (L405) and Sport (L494) owners between 2013 and 2017, the interior tech landscape was genuinely ahead of its time. Yet even Land Rover couldn't predict the universal shift to wireless charging. This charger closes that gap, nestling perfectly into your vehicle's cubby space and transforming it into an intelligent power zone. Simply place any Qi-enabled device on the pad and charging begins instantly—no hunting for cables, no tangled mess on your centre console. The non-slip mat grips your phone securely through corners and motorway merges. Built to Range Rover standards of durability and finish, it integrates so naturally you'll wonder how you ever drove without it. Whether you're managing navigation, music streaming, or hands-free calling, a fully charged phone is no longer a luxury—it's essential. This charger keeps you powered from Knightsbridge to the Scottish Highlands. What's Included ⚡ Wireless Charger Pad Premium Qi-enabled charging surface with non-slip mat 🔌 ACC Power Cable Direct-wire connection to vehicle accessory circuit 📖 User Manual Step-by-step installation and operation guide ✓ Qualification Document Compatibility and warranty certification Product Highlights Qi-Standard Wireless Charging – Compatible with all modern Qi-enabled phones Precision Cubby Fit – Engineered for L405 and L494 centre console geometry Non-Slip Surface – Rubber mat prevents movement on motorway and off-road terrain ACC Power Integration – Wired to accessory circuit, powers down with ignition Zero Clutter – Eliminates cable sprawl and charging cable damage Intuitive Use – Place phone, begin charging—no buttons, no faffing Premium Materials – Aluminium housing, durable rubber mat, premium finish Quick Installation – Plug-and-play; no specialist tools required Universal Phone Support – Works with iPhone 8+, Samsung, Google Pixel, and all Qi devices Reliable Power Delivery – 5W charge output, optimised for in-vehicle use Compatibility Range Rover Model Year Range Status Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Sport (L494) 2013–2017 Direct Fit Range Rover Vogue (L460) 2022–2026 Not Compatible Range Rover Sport (L461) 2022–2026 Not Compatible Range Rover Velar 2018–2022 Not Compatible Range Rover Evoque All years Not Compatible Installation Notes Installation Difficulty: Easy | Time: 15–20 minutes Park your Range Rover on level ground with ignition off. Open the cubby compartment in the centre console and inspect the space. Locate the ACC (accessory) power point or trace the existing cubby wiring harness. Position the charger pad in the cubby, ensuring it sits flush and level. Connect the ACC power cable to the vehicle's accessory circuit (see manual for terminal location). Test charging by placing a Qi-enabled device on the pad; LED indicator should illuminate. Close the cubby carefully and verify charger alignment. Drive a short distance to confirm stable operation and secure mounting. Important: Ensure your phone supports Qi wireless charging. Some older or rugged phones may not be compatible. Do not force the charger into the cubby; it should seat naturally. If you're uncomfortable with ACC wiring, contact an authorised Land Rover technician. Ready to Upgrade Your Vogue or Sport? Transform your cubby into an intelligent charging hub. Say goodbye to cable clutter and hello to seamless, effortless power. Order now and enjoy premium wireless charging engineered for your Range Rover. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews ✓ 30-Day Money-Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All product names and vehicle designations are used for reference and compatibility purposes only. Please verify compatibility with your specific vehicle model before purchase.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Woodgrain Gear Shift Knob Cover Trim — Range Rover Sport L494 (2014–2017) A precision-crafted ABS woodgrain overlay that brings a refined, bespoke feel to the gear selector area of your Range Rover Sport — no specialist tools required. Range Rover Sport L494 2014–2017 ABS Plastic Woodgrain Finish Direct Fit Adhesive Install Interior Trim No Drilling Overview The Range Rover Sport L494 commands respect on every road — its cabin, however, can start to feel dated as the years pass. Whether you're refreshing a well-loved Sport or adding a layer of character to a recently acquired example, the details around the gear selector are one of the first areas owners choose to upgrade. It's a focal point of the driver's environment, touched and seen on every journey. This woodgrain gear shift knob cover trim is engineered to sit cleanly over the existing surround, delivering an immediately elevated aesthetic without any modification to the vehicle. The wood grain texture is rendered in high-quality ABS plastic — chosen for its rigidity, resistance to heat and UV, and its ability to hold fine surface detail. The finish is warm and consistent, with a character that complements the Sport's interior tones far better than bare plastic ever could. Installation requires no drilling, no wiring, and no specialist expertise. The trim uses a clean adhesive backing that bonds securely without damaging your original trim. The result looks purposeful and factory-considered — exactly what you'd expect from an accessory designed specifically for the 2014–2017 Range Rover Sport. What's Included 🪵 Gear Shift Knob Cover Trim 1 × woodgrain ABS overlay, pre-fitted with adhesive backing 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Precision-moulded ABS plastic construction for a solid, premium feel Detailed woodgrain surface texture — warm, refined, and consistent throughout Designed and dimensioned exclusively for the Range Rover Sport L494 (2014–2017) Tool-free installation using integrated adhesive backing UV-resistant material that won't fade or discolour in direct sunlight Heat-stable ABS ensures the trim holds its shape in warm cabin environments Low-profile fit that sits flush against the existing gear selector surround No permanent modification required — fully reversible if needed Enhances interior visual cohesion alongside other woodgrain or dark trim elements Supplied brand new, individually packaged to arrive in perfect condition Compatibility Model Code Year Range Trim Level Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Range Rover Vogue L460 2022–2026 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible If your vehicle is a 2013 Range Rover Sport (L320 generation), please contact our team before ordering — fitment cannot be confirmed for that platform. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Begin with the vehicle off and the cabin at ambient temperature. If your car has been parked in cold conditions, allow it to warm slightly — adhesive bonds more reliably above 15°C. Clean the existing gear shift knob surround thoroughly using an isopropyl alcohol wipe or a dry microfibre cloth. Remove any dust, grease, or polish residue and allow to dry completely. Test-fit the woodgrain trim cover over the gear selector surround without removing the adhesive backing. Confirm alignment and note the correct orientation before committing. Peel the adhesive backing carefully from the trim piece. Avoid touching the adhesive surface with your fingers. Align the trim precisely and press it firmly into position, working from the centre outward. Apply steady pressure across the full surface for 20–30 seconds to activate the adhesive bond. Allow a minimum of one hour before normal use. The adhesive continues to cure and strengthen over the first 24 hours — avoid any forceful contact with the trim during this period. ⚠ Note: Do not attempt installation on a dashboard or trim surface that has been recently treated with silicone-based dressings or conditioning products. These coatings significantly reduce adhesive performance. If in doubt, clean thoroughly with isopropyl alcohol before fitting. Built for Range Rover Owners Who Know the Difference At Victorious Automotive, every product we stock is chosen with the discerning Land Rover and Range Rover owner in mind. This woodgrain shift knob trim is a small change that makes a real difference — and it's backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our support team prior to ordering.

Victorious · Automotive · Keychain FORAUTO Wrench Key Chain – Premium Stainless Steel Spanner EDC Lightweight, durable stainless steel wrench keychain for everyday carry and vehicle maintenance access. Stainless Steel 6.5cm Length EDC Accessory FORAUTO Brand Spanner Design Overview For Land Rover, Range Rover, and Defender owners who take pride in their vehicles and their gear, every detail matters—including the tools you carry. This FORAUTO Wrench Key Chain is engineered as a practical EDC (everyday carry) accessory that combines form and function. Whether you're tending to your vehicle on the road or need a compact spanner within arm's reach, this keychain delivers reliable, no-fuss access. Built from premium stainless steel, this 6.5cm wrench keychain resists corrosion and weathering—essential for owners who frequently venture off-road or into challenging environments. At just 0.5g, it adds virtually no weight to your key ring or equipment bag, yet provides the mechanical advantage of a proper spanner when you need it most. The compact profile and durable construction make it an ideal companion for adventure, maintenance work, and everyday utility. Keep one on your keyring, toss one in your vehicle's glove box, or attach it to a carabiner on your adventure pack. It's the kind of small, thoughtful accessory that separates properly equipped enthusiasts from everyone else. What's Included 🔧 Wrench Key Chain FORAUTO Model 10759, premium stainless steel 📦 Packaging Secure retail packaging, ready to gift or deploy Product Highlights Precision-machined stainless steel construction for durability and corrosion resistance Lightweight design at 0.5g—barely noticeable on your keyring Functional spanner profile suitable for common fasteners and adjustments Compact 6.5cm × 2cm footprint for pocket or glove-box storage FORAUTO premium brand with reputation for automotive accessories Ideal EDC companion for overlanders, mechanics, and off-road enthusiasts Weather-resistant materials withstand rain, mud, and salt exposure Clean, minimal design that complements professional tool kits Versatile attachment—keyring, carabiner-compatible, or standalone carry Affordable, replaceable tool for multi-unit ownership or gifting Compatibility & Specifications Specification Detail Brand FORAUTO Model 10759 Item Type Key Ring / Spanner Material Premium Stainless Steel Length 6.5cm Width 2cm Weight 0.5g Finish Polished stainless steel Vehicle Compatibility Universal Compatible with all Land Rover, Range Rover, Defender, Discovery, Toyota Land Cruiser, Mercedes-G Class, and most automotive applications. Universal design works across all year ranges and trim levels. Installation & Deployment Getting Started Inspect the keychain. Remove from packaging and verify the stainless steel construction and spanner profile are undamaged. Choose your attachment method. Attach directly to an existing keyring, loop through a carabiner, or carry standalone in a pocket or glovebox. Position for access. Keep it where you're most likely to need it—vehicle key ring, equipment bag, or adventure pack. Test the function. Verify the spanner profile engages properly with common fasteners before relying on it in critical situations. Maintain regularly. Wipe clean after exposure to mud, salt, or moisture. Stainless steel resists corrosion but benefits from occasional care. Note: This wrench keychain is designed for light-duty, emergency, or supplementary use. For heavy mechanical work or primary tool kits, use full-size wrenches and professional-grade tools. Always ensure fasteners are properly tightened before driving or load-bearing applications. Ready to Upgrade Your EDC? Add this premium FORAUTO Wrench Key Chain to your vehicle setup, adventure pack, or gift collection. It's the small, thoughtful accessory that separates prepared owners from the rest. Add to Cart Use code 22GET20 for 20% off any 2 items. 4.9/5 · 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Defender, Toyota, Mercedes-Benz, or their parent companies. All trademarks, model names, and vehicle references are used for identification and compatibility purposes only. Product descriptions are for general informational use and do not constitute professional mechanical or technical advice. Always consult your vehicle's official service manual or a qualified technician for maintenance, repair, and installation guidance.

Victorious Automotive · Range Rover / Jaguar · Key Protection Zinc Alloy Key Fob Case Wallet — Land Rover Range Rover & Jaguar A precision-cast zinc alloy shell that clips onto your Range Rover or Jaguar key fob in seconds — ending the notorious plastic-peel problem for good. Range Rover Evoque Jaguar Compatible Zinc Alloy Clip-On Fit Key Fob Protection Drop Resistant Spill Resistant Premium Finish Overview Land Rover and Jaguar key fobs share a well-documented weakness: the outer plastic shell begins to delaminate, peel, and crack with everyday use. It starts subtly — a slight flex at the seam — and before long the electronics inside are exposed to moisture, dust, and the inevitable drops that life brings. For owners who expect their Range Rover or Jaguar to represent the very best, a deteriorating key fob is simply not acceptable. This zinc alloy key fob case has been designed specifically to wrap around your existing remote, encasing it in a solid, die-cast shell that absorbs impact and protects the internals from spills, drops, and daily wear. Unlike soft silicone covers that stretch and discolour, zinc alloy retains its form and finish year after year — giving your key the weight and presence it deserves alongside a premium vehicle. The case clips on in seconds with no tools required, maintains full button functionality through the precisely cut apertures, and adds a tactile quality to the key that feels genuinely elevated. It is the kind of detail that Land Rover and Jaguar owners notice — and appreciate. What's Included 🔑 Zinc Alloy Key Fob Case Precision-cast shell — front and rear halves 🔩 Secure Clip Mechanism Integrated snap-lock — no screws needed 📦 Branded Packaging Presented and protected for gifting 📄 Fitting Guide Simple step-by-step instructions included Product Highlights Super-durable zinc alloy construction — won't flex, crack, or deform Clips on in seconds with no tools or modification required Directly addresses the common plastic-peel failure on LR/Jag remotes Shields key electronics from spills, moisture, and dust ingress Maintains full button access through precision-cut apertures Premium weighted feel that complements a luxury vehicle Set yourself apart — instantly upgrades the look of your key Durable finish resists scratches and daily pocket wear Compatible with both Land Rover and Jaguar key fob profiles A thoughtful gift for any Range Rover or Jaguar owner Compatibility Vehicle Model / Code Year Range Fit Range Rover Evoque L538 2011–2019 Direct Fit Range Rover Evoque L551 2019–2026 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Discovery Sport L550 2015–2022 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2022 Direct Fit Jaguar F-Pace / XE / XF Shared Fob Profile 2016–2022 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Verify Fob Shape Range Rover Sport L461 (2022+) 2022–2026 Verify Fob Shape Defender L663 2020–2026 Verify Fob Shape Installation Notes ⏱ Difficulty: Very Easy  ·  Time: Under 2 Minutes  ·  Tools: None Required Hold your existing key fob face-up and identify the front and rear halves of the zinc case. Place the front half of the zinc shell over the button face of your key fob, aligning the apertures with the buttons. Bring the rear half of the shell around the back of the key fob, ensuring the key ring loop aligns with the case channel. Press the two halves firmly together until you feel and hear the snap-lock clip engage securely on all sides. Test all buttons to confirm full functionality — the case should not impede any button press. Attach your key ring through the integrated loop and the protection is complete. Note: Please verify your existing key fob profile matches the case shape before fitting. The 2022-onwards generation of Range Rover, Range Rover Sport, and Defender key fobs feature a revised profile. If you are unsure, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Protect Your Key. Reflect Your Standard. Your Range Rover or Jaguar represents an uncompromising standard of quality. Your key fob should too. This zinc alloy case is the simplest upgrade you can make — and one of the most satisfying. Backed by our 30-day money-back guarantee and shipped worldwide via DHL, FedEx, UPS, and TNT. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.