Land Rover Defender 2004 - 2016 Accessories

Victorious · Defender 1990 · Exterior Front Middle ABS Adventure Edition Style Grille for Land Rover Defender Aggressive Adventure Edition aesthetics with OEM fitment and premium ABS durability for 1990s Defenders. Defender 1990 ABS Material Honeycomb Design No Cutting Adventure Edition Direct Fit Overview The Land Rover Defender has always been defined by rugged simplicity and purposeful design. This Adventure Edition Style Front Middle Grille respects that heritage while injecting contemporary attitude into your 1990s Defender's front end. Whether you're a purist looking to refresh an ageing grille or seeking that modern-classic aesthetic, this piece delivers visual impact without compromise. Engineered from automotive-grade ABS plastic, this grille combines superior corrosion resistance with the structural rigidity needed for genuine off-road use. The repeating honeycomb mesh pattern isn't merely decorative—it optimises airflow into the engine bay whilst maintaining the aggressive stance that defines Adventure Edition styling. The finish arrives pre-painted, meaning no additional work required. Installation is genuinely straightforward. No cutting, no modifications, no guesswork. The grille mounts directly to your existing attachment points using standard hardware. With OEM-spec tolerances throughout, you'll notice zero panel gaps or misalignment. The detachable letter element adds versatility if you prefer a cleaner, unmarked appearance. What's Included 🎯 Front Middle Grille Adventure Edition style, pre-painted 🔤 Detachable Letter Element Remove for minimalist look ⚙️ Stainless Fasteners Corrosion-resistant hardware 📋 Installation Guide Step-by-step, no technical knowledge needed Product Highlights Automotive-grade ABS—superior toughness, rigidity, and corrosion resistance OEM fit and finish—zero modifications required, direct bolt-on installation Honeycomb mesh design—optimises engine bay airflow without obstruction Pre-painted Adventure Edition aesthetic—ready to install out of the box Detachable letter element—customise the front face to your preference No cutting or modification—fully reversible, completely stock-compatible Heavy-duty stainless fasteners—resist corrosion even in harsh environments Impact-resistant construction—proven durability in genuine off-road conditions Perfect replacement for aged or damaged factory grilles Backed by 30-day money-back guarantee and Victorious quality promise Compatibility Variant Year Range Fitment Land Rover Defender (Series / Classic) 1983–2006 Direct Fit Land Rover Defender 90 1983–2006 Direct Fit Land Rover Defender 110 1983–2006 Direct Fit Land Rover Defender 130 1983–2006 Direct Fit Defender L663 (2020+) 2020–Present Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Open bonnet and remove the existing factory grille by unbolting the 4–6 attachment points around the perimeter. Disconnect any wiring harnesses (if factory lights are integrated) and carefully lift out the old grille. Clean the mounting area with a dry cloth to remove dirt and debris. Position the new ABS grille and align mounting holes with existing attachment points. Insert stainless fasteners and tighten evenly in a cross pattern to avoid warping. Reconnect any wiring if applicable, and test fit for alignment and panel gaps. Close bonnet and inspect from multiple angles for even presentation. Note: If your original grille has integrated wiring for fog lights or daytime running lights, consult the factory loom before disconnecting. Standard fasteners (M6–M8 bolts) are typically reusable; replace only if corroded or damaged. Ready to Refresh Your Defender? Transform your 1990s Defender's front end with genuine Adventure Edition attitude. This grille combines purposeful design with premium materials—no compromise, no fuss. Shop Defender Grilles Use code 22GET20 for 20% off any 2 items. 4.9★ · 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All product names, logos, and brands referenced are the property of their respective owners. This product is designed for fitment with Land Rover vehicles but is not an OEM Land Rover product.

Victorious Automotive · Defender 110 · Interior Matte Chrome Aluminum Alloy Grab Handles for Land Rover Defender 110 Premium interior grab handles designed to enhance accessibility and provide confident grip through rough terrain. L663 2020–2026 Aluminum Alloy Matte Chrome Pair (2pcs) Interior Trim Overview The Defender 110 has become the benchmark for capable family exploration—but transitioning in and out of that elevated driving position demands practical support. These matte chrome aluminum alloy grab handles address that need with understated elegance. Engineered from aircraft-grade aluminum and finished in contemporary matte chrome, this pair installs seamlessly into your Defender's interior architecture. Beyond convenience, they serve as essential safety equipment when navigating technical terrain, delivering tactile feedback and stable hand placement through dynamic driving conditions. Whether it's daily entry and exit, family adventures, or genuine off-road work, these handles combine functional design with the premium finish that Defender owners expect. The matte chrome aesthetic complements modern interior trim without visual heaviness. What's Included 🪝 Pair of Grab Handles 2pcs – left & right configuration ✨ Matte Chrome Finish Contemporary, non-reflective surface ⚙️ Mounting Hardware Stainless steel fixings included 📖 Installation Guide Step-by-step instructions provided Product Highlights Aerospace-grade aluminum alloy construction Matte chrome finish resists fingerprints Ergonomic grip geometry for secure hand placement Lightweight yet rigid support structure Direct fit for Defender 110 L663 (2020–2026) Seamless integration with factory trim lines Temperature-stable material composition Corrosion-resistant surface treatment Dual-position mounting flexibility Premium aesthetic that complements modern interiors Compatibility Model Generation Years Fit Defender 110 L663 2020–2026 Direct Fit Defender 90 L663 2020–2026 Not Compatible Defender 130 L663 2020–2026 Not Compatible Defender Pre-2020 Models 1990–2016 Not Compatible Installation Difficulty: Beginner · Time: 15–20 minutes Ensure interior is clean and dry. Locate mounting points on driver and passenger A-pillar trim. Remove protective backing from adhesive strips or prepare bolt holes per instructions. Align grab handle with mounting points—ensure level orientation. Apply handle firmly and hold for 10 seconds. Allow adhesive to cure per product specifications. Test grip security before full use. Verify no gaps between handle and mounting surface. Note: Some installations may require factory trim removal. If uncomfortable with interior work, consult a Defender-trained technician. Test fit before final installation. Complete Your Defender Interior Premium grab handles transform daily driving comfort and safety. Discover how purposeful design elevates every journey. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any OEM manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility information is provided in good faith based on industry standards and should be verified with your vehicle's documentation before purchase.

Victorious · Defender 1990 · Exterior Lighting 24" Smart Off-Road Light Bar Programmable LED light bar with 49 colours, intelligent modes, and built-in voltage protection for your Defender adventures. Defender 1990 Off-Road Lighting 12V DC 4 Light Modes 49 Colours Strobe Function Overview The 1990 Defender is built for serious terrain and unpredictable conditions. Whether you're navigating tight bush tracks, setting up camp at dusk, or responding to emergency situations, auxiliary lighting transforms capability and visibility in ways a stock setup simply cannot match. This 24" smart off-road light bar combines versatile lighting intelligence with genuine durability. Four selectable modes—spot light for focused distance illumination, ambient color light for atmosphere, combined spot & color for tactical situations, and strobe for emergency visibility—give you control over output suited to the moment. With 49 programmable colours, the system adapts to your needs, whether that's search & rescue coordination, campsite ambience, or technical recovery work. Built-in voltage protection and standby mode safeguard your Defender's electrical system, preventing dangerous battery drain. A dedicated DC 12V supply ensures stable operation across the full range of off-road conditions—bogging terrain, water crossings, extreme temperatures. This is lighting designed for the extremes your Defender encounters. What's Included 💡 24" LED Light Bar Multi-mode intelligent system with 49 colours 🎛️ Control Module Voltage protection & standby functionality ⚡ DC 12V Wiring Harness Pre-assembled with fused protection 🔧 Mounting Hardware Stainless steel fasteners & brackets Product Highlights Four dedicated light modes: Spot, Color, Spot & Color, Strobe 49 programmable colour options for custom scenarios Built-in voltage protection prevents battery drain Intelligent standby mode conserves electrical resources DC 12V operation ensures compatibility with Defender systems 24" wide coverage for comprehensive visibility Strobe function for emergency & tactical use Stainless steel construction withstands corrosion & UV Sealed LED modules for water & dust ingress resistance Field-serviceable design for remote maintainability Compatibility Vehicle Year Range Status Land Rover Defender 90 1983–1990 Direct Fit Land Rover Defender 110 1983–1990 Direct Fit Land Rover Defender 130 1983–1990 Direct Fit Land Rover Defender (Post–1991) 1991–2016 Requires Adapter Range Rover Classic 1987–1994 Direct Fit Land Rover Discovery 1 1989–1998 Requires Adapter Installation Difficulty & Duration Intermediate — 2–3 hours with basic hand tools. Suitable for owners with basic electrical competency. Installation Steps Disconnect the negative battery terminal to isolate the vehicle's electrical system. Identify the mounting location on the roof rack, front bumper, or roof bar and clean the surface thoroughly with isopropyl alcohol. Position the light bar and secure using supplied stainless steel brackets. Ensure alignment for optimal visibility. Route the DC 12V harness along existing vehicle wiring, securing with cable ties to avoid vibration damage. Connect the positive lead to an appropriate fused power source (battery or auxiliary relay) rated for the bar's amperage draw. Ground the negative lead to a clean, unpainted chassis point near the installation site. Install the control module in a protected location (glove box or under-dash area), securing against movement. Test all four light modes and colour programming before final fastening. Reconnect the negative battery terminal and perform a full electrical systems check. Allow 24 hours for control module calibration before extended off-road use. Critical: Ensure your vehicle's electrical system can support the light bar's amperage draw. Upgrade battery capacity or install a secondary auxiliary battery if running on a Series-era Defender with limited charging capacity. Improper installation may void coverage. Ready to Upgrade Your Off-Road Vision The 24" Smart Off-Road Light Bar transforms your Defender's night-time capability and emergency visibility. Four distinct modes, 49 programmable colours, and intelligent voltage protection deliver precision lighting for exploration, recovery, and security work. Add to Cart Code: 22GET20 — 20% off any 2 items ✦ 4.9/5 stars from 12,300+ verified reviews ✦ 30-day money-back guarantee ✦ Worldwide shipping via DHL, FedEx, UPS, TNT ✦ Expert support: +44 203 943 9919 Victorious Automotive is an independent specialist retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any other manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility information is provided for reference only and is based on standard fitment guidance.

Victorious · Defender 90/110 · Exterior Lighting License Plate Light – 3W LED Replacement Bulbs for Land Rover Defender 90/110 (1990–2016) Pure white LED rear lamp upgrade. Modern brightness, factory fitment, zero modifications. Defender 90 Defender 110 1990–2016 LED 3W White 6000K Direct Fit Overview Your Land Rover Defender 90 and 110 deserve lighting that matches the excellence of the rest of your vehicle. Factory halogen license plate bulbs dim, yellow with age, and consume unnecessary power. This 3W LED replacement delivers crisp, white light (6000K) while cutting power draw—and it installs in seconds with no modifications. Whether you're at a British car meet or navigating night roads, proper lighting visibility matters. These premium YAM LEDs meet DOT/ECE standards and won't interfere with your vehicle's electrics. They're the kind of detail that separates a well-maintained Defender from the rest. One pair handles both rear license plate positions. Drop-in fitment means no wiring, no fabrication, no regret. What's Included 💡 LED Bulb Pair Two 3W white LED units, ready to fit 📋 Fitment Guide Quick reference for 90/110 variants ✓ 30-Day Guarantee Full refund if not satisfied 🌍 Worldwide Shipping DHL, FedEx, UPS, TNT options Product Highlights 3W pure white LED (6000K colour temperature) Drop-in replacement—no soldering or modifications Lower power draw than original halogen DOT and ECE approved for road use Compatible with Defender 90 & 110 (1990–2016) Pair covers both rear license plate positions Instant brightness, zero warm-up time Long service life compared to halogen No dash warning lights or error codes Premium YAM-brand quality & reliability Compatibility Model Year Range Fitment Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2016 Direct Fit Defender 2020+ (L663) 2020–2026 Not Compatible Installation Notes Difficulty Level: Beginner | Time Required: 5 Minutes Open your Defender's rear hatch or tailgate. Locate the license plate light housing (typically two units, top corners of the plate area). Gently twist the existing halogen bulb counterclockwise to release from its socket. Insert the new LED bulb and twist clockwise until snug. Do not over-tighten. Repeat for the second unit (both lights should now be bright white). Test with headlights on and engine running to confirm proper function. Note: If you see error codes on your dashboard after installation, your Defender's system may require a CAN-bus compatible LED or a load resistor. Contact us for a compatibility solution specific to your vehicle's year and spec. Ready to Brighten Your Defender? Clean, white lighting is a small detail that transforms your Defender's appearance and function. Get these premium LED bulbs fitted in minutes. Part of a larger Defender lighting collection—explore more upgrades for your 90, 110, or 130. Shop Defender Exterior Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ reviews 📞 +44 203 943 9919 — Mon–Fri 9am–7pm ✓ 30-day money-back guarantee 🌍 Worldwide DHL, FedEx, UPS, TNT shipping Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed to fit the listed vehicles; compatibility varies by year and specification. Always consult your vehicle's handbook or contact us before installation.

Victorious · Defender 90/110 · Exterior Grilles Silver ABS Front Grille Kit for Land Rover Defender 90 & 110 Premium replacement grille assembly with dual surrounds and mounting brackets – restores factory aesthetics or enables custom styling. Defender 90 Defender 110 1990–2016 ABS Plastic Silver & Black 5-Piece Kit Overview Land Rover Defender 90 and 110 models demand authentic OEM-specification front grille components. This silver ABS replacement kit restores the factory front fascia to factory condition or enables a modern two-tone aesthetic that complements aftermarket bumpers and bull bars. The kit comprises a middle grille panel, dual side surrounds, and all necessary stainless steel mounting brackets. ABS construction resists UV fade and weathering far better than painted alternatives, and the silver-and-black finish integrates seamlessly with both classic and contemporary Defender builds. Direct replacement fitment requires no modification to mounting points. All hardware is included; installation typically takes 45–90 minutes with standard hand tools. What's Included ◆ Middle Front Grille 1 × Centre grille panel, silver finish ◆ Grille Surrounds 2 × Left & right surround trims ◆ Mounting Brackets 2 × Stainless steel fixing brackets ✓ Hardware Pack All fasteners & clips included Product Highlights 100% brand new ABS construction – no refurbished or recycled material Two-tone silver & black finish – factory-authentic or custom-ready Direct bolt-on fitment – no modification to Defender fascia required UV-stable polymer – resists fading and weathering better than painted alternatives Complete hardware – all brackets and fasteners pre-included Defender 90 & 110 compatible – fits both wheelbase variants Easy 45–90 minute install – achievable with basic hand tools Improves front end appearance – refreshes worn or damaged grille areas Paired with bull bars & bumpers – complements most aftermarket upgrades 30-day fit guarantee – hassle-free return if incompatible with your build Compatibility Model Year Range Fit Status Defender 90 (3-door) 1990–2016 Direct Fit Defender 110 (5-door) 1990–2016 Direct Fit Defender 130 1990–2016 Not Compatible Discovery 1–4 1989–2016 Not Compatible Range Rover Classic / P38 1970–2002 Not Compatible Installation Guide Difficulty: Beginner | Time: 45–90 mins Disconnect battery negative terminal to prevent accidental short circuits while working near electrical components. Remove existing grille assembly – unclip or unbolt the factory grille from the front fascia. Keep fasteners in a labelled container. Clean mounting surface – wipe away debris, old adhesive, or corrosion using a dry cloth and mild degreaser. Install side surrounds first – fit left and right surround panels using the provided stainless brackets. Ensure clips engage fully. Mount centre grille panel – align the middle grille with the surround panels and secure using all fasteners. Check for even gaps. Verify all connections – tug each component to confirm tight fitment. No rattling or movement should occur. Reconnect battery – restore power and test any integrated lighting (if applicable). Note: Allow 1–3 mm variation in fitment due to manual measurement tolerances. If surrounds are slightly misaligned, use plastic shims under the brackets to adjust. Do not force components into place; gentle pressure indicates correct seating. Ready to Restore Your Defender's Front End? Silver ABS grille kits are a fast, cost-effective way to refresh a tired fascia or complete a modern exterior refresh. Fits Defender 90 & 110 models from 1990–2016. All hardware included; 30-day money-back guarantee on all orders. Add to Cart Or use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ☎️ +44 203 943 9919 – Mon–Fri 9am–7pm ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility information is provided in good faith; please verify fitment with your vehicle's documentation before purchase. ```

Victorious · Defender 90/110 · Exterior Black ABS Front Grille Kit with Surrounds & Brackets – Defender 90 110 Complete front grille assembly with integrated surrounds and mounting brackets for modern Defender styling. Defender 90 Defender 110 1990–2016 ABS Material Silver & Black Direct Fit Overview The Land Rover Defender 90 and 110 are the backbone of classic British 4x4 heritage. This front grille kit brings them into the modern age with contemporary styling while respecting the iconic Defender proportions. Whether you're refreshing a 1990s-era example or updating a 2016 model, a clean, assertive front end sets the tone for the entire vehicle. This five-piece ABS grille assembly includes a central grille surround, flanking panels, and stainless-steel mounting brackets. The silver and black colour scheme complements both original and upgraded Defender exteriors. ABS construction offers impact resistance, lightweight installation, and long-term UV stability without the brittleness of older plastic compounds. Unlike fibreglass alternatives, ABS won't crack under temperature cycling. The integrated bracket system bolts directly to the existing cross-member—no fabrication, no guesswork. Precision-moulded to OEM tolerances, this kit sits flush with the body panel gap and integrates seamlessly with Defender's horizontal design language. What's Included 🎯 Central Grille 1 × main grille surround panel ⬅️➡️ Side Surrounds 2 × left/right flank panels 🔧 Mounting Brackets 2 × stainless steel fastening brackets 📋 Fitting Guide Digital installation documentation Product Highlights 100% brand-new ABS polymer – no recycled or regrind material Silver and black two-tone finish – factory-level paint adhesion Integrated mounting brackets – no separate fastener kit required UV-stabilised formula – won't fade or yellow in sunlight Impact-resistant construction – survives off-road trail abuse Thermal cycling tested – expansion/contraction rated to –20°C to +60°C Fits Defender 90 and 110 (1990–2016 inclusive) Precision-moulded tolerances – OEM panel gaps and fitment Zero modification required – bolt-on installation, no cutting or grinding 30-day money-back guarantee – complete confidence in quality Compatibility Model Years Status Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2016 Not Compatible Defender 2020+ (L663) 2020–present Not Compatible Range Rover / Discovery All Not Compatible Installation Guide Difficulty: Intermediate | Time: 45–90 minutes Disconnect battery negative terminal. Always isolate power before working near the front end. Remove existing grille assembly. Unbolt the original grille surround (typically 6–8 fasteners). Carefully disconnect any wiring for headlamp surrounds if fitted. Inspect mounting face. Clean any dirt, corrosion, or old sealant from the cross-member and body frame. Position central grille panel. Align the main grille to the centre cross-member. Use the included brackets to pilot the alignment—do not tighten fully yet. Install left and right surrounds. Slot the side panels into the grille surround. Verify even gaps (1–3 mm) top and bottom. Secure all brackets. Tighten fasteners in a cross pattern (top-left, bottom-right, top-right, bottom-left) to 8–10 Nm. Avoid over-torquing, which may stress ABS. Test fitment and finish. Check that the grille sits flush with the body panel and rotates no more than 1–2 mm under hand pressure. Reconnect battery and test any integrated lighting. Verify headlamps and auxiliary lights function normally. Important: If your Defender has been in an accident or the front cross-member is bent, have the frame geometry checked before installing this kit. Misalignment of the mounting face will result in panel gaps and potential rocking. Upgrade Your Defender's Front End Today Transform your 1990s or 2000s Defender with a modern, engineered grille assembly. Premium ABS construction, complete bracket system, and 30-day money-back guarantee. Trusted by 12,300+ Land Rover owners worldwide. Add to Cart Use code 22GET20 for 20% off when ordering 2+ items. ⭐ 4.9/5 rated 🌍 Worldwide shipping 📞 +44 203 943 9919 ✅ 30-day guarantee Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Land Rover, or any other trademark holders mentioned. All product names and logos are the property of their respective owners. Product compatibility information is provided in good faith; always verify fitment with your vehicle's documentation or contact our sales team before purchase.

Victorious · Defender 90/110 · Exterior Lighting 10-Piece LED Complete Light Upgrade Kit for Land Rover Defender 1990–2016 Premium clear-lens LED conversion delivering modern visibility, efficiency, and authentic styling—complete with fog, reverse, and indicator lamps. Defender 90/110 1990–2016 Clear Lens PMMA E-Mark Approved IP67 Waterproof Includes LED Flasher Overview The Land Rover Defender 90 and 110 are icons of off-road heritage and timeless utility. Over three decades of production, countless owners have upgraded their lighting to improve safety, reduce electrical load, and achieve a sharper modern appearance. This 10-piece LED lighting kit transforms your Defender's exterior, replacing factory halogen and incandescent bulbs with efficient, bright LED units in factory-correct positions. Built around clear PMMA lens assemblies in 73mm and 95mm sizes, this kit includes front and rear indicators, position lights, stop/tail lamps, fog lamp, and reverse lamp—each engineered to E-mark standards (E4 approval) and rated IP67 for water resistance. The included adjustable LED flasher unit ensures indicator operation remains smooth and legal, while the 12V, 5W LED elements consume far less power than originals, reducing strain on your Defender's classic electrical system. Installation is straightforward for the mechanically inclined; professional fitting is recommended for pre-1994 models that may require minor wiring adaptation. Once fitted, you'll enjoy enhanced nighttime visibility, lower current draw, and a cohesive, modern appearance that respects your Defender's legendary design. What's Included 🔄 4× Amber LED Indicators 73mm clear lens, front & rear turn signals 🛑 2× Red Stop/Tail Lights 73mm clear lens, rear-mounted 💡 2× White Position Lights 73mm clear lens, front driving lights 🚨 1× Red Rear Fog Lamp 95mm clear lens ⬅️ 1× White Reverse Lamp 95mm clear lens ⚡ 1× LED Flasher Unit Adjustable, prevents hyper-flash 🔩 Hardware Pack 20 screws + 20 gaskets included Product Highlights Complete 10-Piece System — All front, rear, fog, and reverse lamps in one kit E-Mark Certified — E4 approval ensures legal road compliance across Europe Clear PMMA Lenses — Authentic appearance, superior light transmission LED Technology — 5W per unit, 3,400 lumens total; 70% less power than halogen IP67 Waterproof Rating — Sealed against dust, mud, and water ingress Modern Colour Coding — Amber indicators, white position/reverse, red tail/fog—factory-correct Adjustable LED Flasher — Prevents hyper-flash and compatibility issues with LED bulbs 12V DC Operation — Direct compatibility with all Defender electrical systems Simple Hardware — Screw-mounted design, gaskets included for weatherproofing Pre-1994 Support — Minor wiring modifications noted; professional install recommended Compatibility Model Years Fitment Defender 90 1983–2016 Direct Fit Defender 110 1983–2016 Direct Fit Defender 90 (Pre-1994) 1983–1993 Wiring Mod Required Defender 110 (Pre-1994) 1983–1993 Wiring Mod Required Defender 130 1987–2016 Direct Fit Installation Notes Difficulty Level: Intermediate | Time: 2–4 Hours Disconnect the negative battery terminal to isolate the electrical system. Remove existing lamp assemblies by unbolting from body mounts (73mm front and rear lamps are standard-fitted). Disconnect wiring from original lamps and inspect connector types (may vary on pre-1994 models). Install new clear-lens LED lamp units into original mounting positions using provided screws and gaskets. Connect LED lamp wiring to original harnesses; insert the adjustable LED flasher unit into the indicator circuit (typically behind dashboard or in engine bay fuse block). Install the larger 95mm fog and reverse lamps in their respective positions (rear-mounted); secure with gaskets. Test all functions: indicators, position lights, stop lamps, fog lamp, and reverse lamp before final reassembly. Reconnect battery and perform on-road validation of all lighting functions. Pre-1994 Models: Original wiring harnesses may not accommodate LED flasher directly. We recommend professional installation or consultation with a Defender specialist to ensure safe wiring integration. Some vehicles may require a dedicated load-resistor module. Ready to Upgrade Your Defender Lighting? Transform your Defender 90/110 with modern LED efficiency, authentic styling, and road-legal compliance. This premium 10-piece kit combines factory design with cutting-edge technology—backed by Victorious Automotive's 30-day guarantee and 4.9-star owner reviews. Shop Defender Lighting Use code 22GET20 for 20% off any 2 items 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide Shipping DHL, FedEx, UPS, TNT ✅ 30-Day Money Back Guarantee ⭐ 4.9/5 Stars 12,300+ Reviews Victorious Automotive is an independent specialist in Land Rover, Range Rover, and Defender accessories. We are not affiliated with, endorsed by, or connected to Land Rover or Jaguar Land Rover. All product names, logos, and brands are property of their respective owners. This listing is for aftermarket LED lighting upgrades only and is offered on an as-is basis. Installation difficulty and wiring requirements vary by model year and original equipment configuration. We recommend professional fitting for peace of mind. ```

Victorious · Defender 90/110 · Exterior Protection Steel Front Lamp Guard Sets for Land Rover Defender 90 & 110 Heavy-duty headlight protection with zinc-plated construction and hinged design for easy bulb access and long-term durability. Defender 90 Defender 110 1990–2016 Steel & Zinc Hinged Design Pair Overview Your Defender's headlights are vulnerable to stone chips, debris, and off-road contact. These steel front lamp guards provide comprehensive protection for both 90 and 110 models, covering the entire lamp surround with a rugged, purpose-engineered design that doesn't compromise visibility or styling. Built from heavy-gauge steel with zinc plating for rust resistance and finished in durable black automotive powder coat, these guards are made to withstand years of genuine off-road use. The hinged construction allows quick access to bulbs and service points without removal, and installation is straightforward—supplied as a ready-to-fit pair with all necessary hardware. Whether you're tackling tight woodland tracks or protecting your investment in daily use, these guards balance serious protection with a clean, integrated appearance that respects your Defender's authentic character. What's Included 🛡️ Front Lamp Guard Pair Left & right guards, pre-assembled ⚙️ Complete Hardware Bolts, brackets & washers included 📋 Fitting Guide Step-by-step instructions 📦 Neutral Packaging Secure transit protection Product Highlights Zinc-plated steel construction for superior rust protection Black powder-coat finish resists UV fading and weathering Hinged design for tool-free bulb and ballast access Full-size coverage of entire lamp surround Heavy-gauge steel for impact and stone-chip resistance Supplied as a matching pair (left & right) Direct bolt-on installation, no cutting or modification Compatible with both Defender 90 and 110 models Authentic appearance that complements factory styling 12-month manufacturer warranty against defects Compatibility Model Years Fit Status Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2007 Not Compatible Defender 2020+ 2020–Present Not Compatible Installation Notes Installation Difficulty: Easy | Time: 30–45 minutes Ensure vehicle is parked on level ground with ignition off Identify headlight mounting points on front bumper/grille area Align left guard to left headlight and secure using provided bolts and brackets Repeat on right side, ensuring both guards sit symmetrically Tighten all bolts progressively in a crisscross pattern to prevent misalignment Test hinged mechanism to confirm smooth operation and full bulb access Perform final torque check after 100 miles of driving Important: Do not over-tighten bolts; hand-tight plus ¼ turn is sufficient. If guard sits proud or misaligned, loosen all bolts and re-seat before final tightening. Ready to Protect Your Defender? Add genuine steel lamp guards to your Defender 90 or 110 and drive with confidence on any terrain. Full 12-month warranty. Free worldwide shipping on orders over £150. Shop Lamp Guards Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS ✅ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any official Land Rover entity. All product names and vehicle designations are used for identification purposes only.

Victorious · Defender · Interior Hardware Chrome Aluminum Door Handles for Land Rover Defender 1990–2016 Upgrade your Defender's interior with premium aluminum alloy handles featuring DEFENDER lettering—clean, durable, and instantly refined. Defender 1990–2016 Aluminum Alloy Chrome Finish Interior Set of 2 ISO9001 Certified Overview Land Rover Defender owners know that factory interior hardware can show its age. Over three decades of production, the Defender's cabin evolved, but the door handles on many models remain visibly tired—worn plastic or dull finishes that don't reflect the quality of the rest of your vehicle. These aluminum alloy door handles replace the factory black originals with a polished chrome finish, each stamped with clear DEFENDER lettering. The upgrade is immediate and visible every time you enter your truck. Unlike cheap plastic replacements, aluminum alloy resists corrosion, won't fade, and develops a sophisticated patina over years of use. At 613g for the pair and engineered to ISO9001 standards, these handles are designed for daily durability and are a favorite among Defender restoration enthusiasts. The contrast between chrome hardware and traditional Defender interiors creates authentic, period-correct character. What's Included 🚪 2 × Chrome Door Handles Aluminum alloy, polished finish with DEFENDER lettering 📏 Pre-Fitted Dimensions 23cm × 8cm × 7cm; direct fit for Defender models listed ✓ Installation Hardware All fasteners included; no additional tools required Product Highlights Premium aluminum alloy construction resists corrosion and fading Polished chrome finish pairs with any Defender interior colour scheme Clear DEFENDER lettering adds authentic factory-inspired character ISO9001 certified manufacturing—engineered for 100,000+ cycles Drop-in replacement for factory handles on 1990–2016 models Low-profile ergonomic grip; comfortable for daily use Pair weighs 613g—lightweight without compromising durability Compatible with both left-hand and right-hand drive cabins Easy 10-minute swap; no drilling or modifications needed Part HT-179; backed by Victorious 30-day money-back guarantee Compatibility Defender Model Year Range Fitment Defender 90 / 110 / 130 1990–2001 Direct Fit Defender TDi / TD5 2002–2007 Direct Fit Defender (Final Edition) 2008–2016 Direct Fit Defender L663 (Current) 2020–Present Not Compatible Range Rover / Range Rover Sport All Not Compatible Not sure which Defender you own? Check your chassis plate (driver side A-pillar) or contact us: +44 203 943 9919 (Mon–Fri 9am–7pm). Installation Guide Remove & Replace — 10 Minutes, No Tools Required Open the door and locate the factory black handle on the interior panel. Pry gently from the rear edge using a plastic trim tool (or credit card) to release the retaining clip. Slide the old handle out of its mounting slot and disconnect any wiring (if your model has electric windows/locks). Insert the new chrome handle into the slot, ensuring the DEFENDER lettering faces outward. Press firmly until the retaining clip snaps into place—you'll hear a distinct click. Reconnect any wiring and test the handle engagement. Repeat for the second door. Note: These handles are designed for manual operation. If your Defender has electric door locks, the handle release mechanism remains unchanged—you are only replacing the visible grip surface. Upgrade Your Defender Today Small details transform daily drives. Chrome door handles catch the light, remind you why you love this truck, and cost less than a tank of fuel. Join 12,300+ Defender owners who've trusted Victorious to bring their interiors to life. Add to Cart Use code 22GET20 for 20% off when you buy 2 or more items. ⭐ 4.9/5 stars from 12,300+ reviews 🌍 Ships worldwide via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm) or email support@victorious.shop. We're here to help. Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Land Rover, or their parent companies. All product names and trademarks remain the property of their respective owners. This product is designed for fitment on the vehicles listed above and does not modify vehicle safety systems or performance parameters.

Victorious · Defender TD5 / TD4 · Air Intake Snorkel Kit Air Filter for Land Rover Defender TD5 & TD4 Direct intake airflow from outside the vehicle, protecting your engine from dust, water and debris in extreme terrain. Defender TD5 1999–2017 Defender TD4 2007–2017 Right-side fitment LLDPE construction CE certified Overview Built for the serious Defender owner, this snorkel kit transforms how your TD5 or TD4 breathes during off-road work, water crossings, and high-dust environments. Whether you're tackling desert tracks or crossing shallow fords, a proper snorkel intake positions your engine's air source higher and further from ground-level contamination—the factory air path simply cannot compete. This system draws clean, cooler air from roof height, which also improves throttle response and reduces engine strain in hot climates. The sealed intake design prevents water ingestion during water crossings and eliminates the dust clouds kicked up by your own wheels. For any Defender used beyond tarmac, it's essential equipment. Manufactured from durable LLDPE (linear low-density polyethylene) and engineered specifically for the TD5 turbodiesel and TD4.2-litre engines, installation is straightforward and requires no engine modifications. CE certified and backed by Victorious' 30-day guarantee. What's Included 🔧 Snorkel Tube Assembly Rigid LLDPE intake runner with bonded joints ⭕ Air Filter Head Sealed intake with velocity damper 🔗 Mounting Brackets & Hardware Stainless fasteners, right-side fitment 📋 Installation Guide Step-by-step fitment instructions Product Highlights Roof-mounted intake draws air above dust and water spray Cooler air improves throttle response and engine efficiency Sealed design prevents water ingestion in shallow crossings LLDPE construction resists UV, heat, and impact damage Eliminates choking effects of standard dashboard intake Right-side fitment (passenger side) for clean installation No engine modifications required CE certified engineering and safety tested Reduces hydro-lock risk in wet terrain Improves fuel economy in dusty, high-heat environments Compatibility Model Engine Year Range Fit Status Defender 110 / 90 TD5 2.5L Turbo Diesel (5-cyl) 1999–2017 Direct Fit Defender 110 / 90 TD4 2.1L / 2.4L Diesel (4-cyl) 2007–2017 Direct Fit Defender TDi, 300Tdi (pre-1999) 2.5L Naturally Aspirated 1990–1998 Not Compatible Defender PUMA / P400 (2020+) 2.0L Petrol / Diesel 2020–2026 Not Compatible Installation Difficulty: Intermediate | Time: 2–3 hours Remove interior trim panels and roof lining on the right side (A-pillar and headlining) Drill or cut access hole through roof at mounting point (template provided) Thread snorkel tube through cabin, positioning intake head at roof edge Secure mounting brackets to roof structure using stainless hardware Connect snorkel tube to factory air intake box with provided clamps Seal all entry points with weatherproof sealant (not included) Reinstate trim panels and test for air leaks Important: Ensure all cable runs (electrics, roof lining) are clear before roof drilling. We recommend professional installation if you're unfamiliar with interior trim work. This is a right-side fitment only—left-side placement will interfere with driver visibility and window operation. Ready to Breathe Better Offroad? Equip your Defender TD5 or TD4 with serious intake protection. This snorkel kit is the upgrade every serious off-road Defender owner should have—cleaner air, cooler runs, safer water crossings. Shop Defender Air Intake Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 stars – 12,300+ reviews 🚚 Worldwide shipping – DHL, FedEx, UPS ✅ 30-day guarantee – Money back, no questions 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover distributor. All Land Rover product names and trademarks are the property of Jaguar Land Rover Ltd. Product compatibility is based on standard factory specifications; fitment may vary based on vehicle modifications or non-standard equipment. Always consult your vehicle's manual before installation.

Victorious · Defender 90 · Exterior Protection 4x4 Offroad Light Guards for Land Rover Defender 90 Premium aluminium protective headlight covers engineered to safeguard your Defender 90's optics during serious offroad work and daily driving alike. Defender 90 1990–2016 Aluminium Construction Protective Guards Screw Installation Overview The Land Rover Defender 90 is built for uncompromising terrain. Whether you're navigating rocky trails, forging through dense bush, or working in tight spaces, your headlights face constant threat from stones, branches, and impacts that smaller 4x4s would never encounter. Standard plastic lenses are fragile and expensive to replace—often £300–£600 per unit before labour. These 4x4 Offroad Light Guards deliver serious protection without compromise. Cast from aerospace-grade aluminium, they mount directly over your Defender 90's headlights via simple screw fastening. The guards disperse impact force across a wider surface area, absorbing punishment that would otherwise shatter expensive OEM lenses. Unlike flimsy plastic alternatives, aluminium won't crack, warp, or degrade under UV exposure or extreme temperature swings. Designed for the working Defender owner—farmers, contractors, expedition teams, and enthusiasts who push their vehicles beyond tarmac. Installation takes under 20 minutes per side. No drilling. No permanent modifications. Completely reversible. What's Included 🛡️ Light Guard Set One pair (left & right) aluminium guards ⚙️ Hardware Pack 6 stainless steel mounting screws + washers 📖 Fitting Guide Step-by-step English instructions with diagrams ✓ Quality Warranty 30-day money-back guarantee on all parts Product Highlights Aerospace-grade aluminium – corrosion-resistant, lightweight, unbreakable Direct fit for Defender 90 (1990–2016 all variants) Screw fastening – no drilling, no permanent damage to bodywork Disperses impact force – protects £300–£600 OEM headlight assemblies UV-stable and temperature-resistant – works in extreme climates Sleek integrated design – complements Defender's classic aesthetic Easy reversible installation – remove anytime without trace Includes all mounting hardware – stainless steel, corrosion-proof Tested for offroad durability – rocky terrain, brush, water fording Pair price – both left and right guards included Compatibility Defender Model Year Range Fit Status Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Not Compatible Defender 130 1990–2016 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty Level: Beginner · Time Required: 20 minutes Open bonnet and locate headlight assembly mounting points on both sides. Position left guard over driver-side headlight, aligning screw holes with bodywork. Insert three stainless steel screws with washers (hand-tight first, then snug with Phillips screwdriver). Repeat for right guard on passenger side. Check alignment – guards should sit flush and level. Tighten all six screws evenly. Test fit by gently applying lateral pressure – no movement should occur. Note: Do not over-tighten screws – aluminium is soft and threads can strip. Hand-snug + quarter-turn is sufficient. If your Defender's headlight surrounds are severely corroded, light surface cleaning with fine wire wool is recommended before installation. Why Victorious Automotive We specialise exclusively in Land Rover, Range Rover, and Defender accessories for owners who refuse compromise. Every product in our range is tested in real-world conditions—from Scottish highlands to African bush. Our team drives Defenders daily. We understand the pain points. This product exists because we needed it too. 30-day money-back guarantee. Worldwide shipping via DHL, FedEx, UPS, or TNT. UK phone support (Mon–Fri 9am–7pm). 12,300+ verified 4.9-star reviews from genuine customers. Ready to Protect Your Defender? Stop worrying about headlight impacts on every trail. These guards will absorb the hits so your optics don't have to. Reversible, durable, and built for real offroad work. Shop Defender 90 Accessories Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews ✓ 30-day guarantee ✓ Worldwide shipping ✓ UK phone support Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official JLR subsidiary. All vehicle names and trademarks remain the property of their respective owners. This product is an aftermarket accessory and does not constitute an official Land Rover part.