Range Rover Velar Accessories

Victorious Automotive · Range Rover Sport L494 / Vogue L405 · Interior Trim Carbon Fiber Seat Trim for Range Rover Sport L494 & Vogue L405 (2014–2017) A precision clip-on carbon TPU seat trim that delivers the SVR aesthetic to your Sport or Vogue cabin — no tools, no fuss, no compromise. L494 Sport L405 Vogue 2014–2017 Carbon TPU Clip-On Fit SVR-Inspired Look Laser-Cut Precision No Drilling Required Interior Upgrade Overview The Range Rover Sport L494 and Vogue L405 set a benchmark for refined performance SUVs — interiors designed with intent, materials chosen for presence. But for owners who want that extra edge of visual aggression, the standard seat surround trim leaves something to be desired. The factory finish is clean, but it doesn't speak to the SVR character that so many Sport and Vogue owners aspire to. Our Carbon Fiber Seat Trim is a direct response to that. Precision laser-cut from durable carbon TPU, each trim is engineered to clip cleanly over the existing seat trim panel, transforming the look of the seat surround area without any permanent modification. The carbon weave texture adds depth and tactility to the cabin, elevating the visual atmosphere around the seat in a way that feels factory-fitted — not aftermarket. This is the kind of detail that enthusiasts notice. Whether you're building toward a full SVR-inspired interior or simply adding considered touches to an already impressive cabin, the carbon seat trim delivers a confident upgrade with zero risk to your vehicle. Two trims are included per order — one for each front seat — ensuring a consistent, symmetrical transformation across the cabin. What's Included 🪑 Carbon Fiber Seat Trim ×2 One per front seat — matched pair for symmetrical fitment 📋 Fitment Guide Step-by-step installation reference included Product Highlights Precision laser-cut carbon TPU for exact factory-panel alignment Clip-on installation — no tools, adhesive, or drilling required Designed to achieve the coveted SVR interior aesthetic Durable TPU construction resists heat, UV fade, and daily wear Deep carbon weave texture adds visual depth and tactility Seamless integration with existing seat surround panels Supplied as a matched pair for consistent front-cabin fitment Fully reversible — original trim remains completely undamaged Compatible with both Sport L494 and Vogue L405 seat configurations Lightweight construction adds zero perceptible bulk to seat area Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2018–2022 Verify Before Purchase Range Rover Sport SVR L494 2014–2017 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Unsure about your specific build or seat variant? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Begin with the seat in its normal upright position. Ensure the seat surround area is clean and dry — a quick wipe with a microfibre cloth removes any dust or residue that could affect the clip seating. Remove the carbon seat trim from its packaging and orient it correctly against the existing factory panel. The trim is directional — match the contour profile to the panel shape before applying pressure. Align the clip points along the top edge of the trim with the corresponding edges of the factory panel. Start from one end and work progressively across, pressing firmly but evenly until each clip engages with a tactile click. Run your fingers along the full perimeter of the trim to confirm all clips have seated fully and the edges are flush with the surrounding surfaces. There should be no flex or movement in the installed trim. Repeat the process for the second seat. Step back and inspect both trims from a natural seating angle — the result should appear factory-fitted with no visible gaps or misalignment. ⚠ Important: Confirm your exact model year and seat variant before installation. Trim profiles can vary between production runs within the same model year. If the trim does not align naturally during dry-fit, do not force the clips — contact our support team for guidance. Forcing an incompatible fit may damage the factory panel. Upgrade Your Sport or Vogue Interior Explore the full range of interior and exterior accessories for the Range Rover Sport L494 and Vogue L405 — engineered to the same standard of precision and quality. Shop Range Rover Sport L494 → Shop Range Rover Vogue L405 → Buying two items? Use the code below at checkout for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque · Interior Lighting Interior LED Light Kit for Range Rover Evoque – Full Cabin Upgrade (2005–2023) Transform every journey inside your Evoque with a precisely engineered LED interior kit — brighter, cleaner light across every cabin zone, with zero error codes and no rewiring required. Range Rover Evoque L538 · L551 2005–2023 Canbus Error Free Plug & Play 50,000hr Lifespan Heat Resistant Direct Fit Overview The Range Rover Evoque has always stood apart for its design-led interior — low roofline, premium surfaces and a cabin built to impress. But the factory halogen interior bulbs do very little to complement that effort. They cast a dim, warm-yellow light that dates the interior and leaves door pockets, boot areas and vanity mirrors barely usable in low-light conditions. This LED kit is the single most effective low-cost upgrade you can make to the Evoque's interior presence. Engineered specifically for Land Rover applications across the 2005–2023 model range, each bulb in this kit is fully Canbus-compatible — meaning your instrument cluster will not register a fault, and you will not encounter the blinking or flicker that cheaper universal LEDs are notorious for. The output is a clean, neutral-to-cool white that transforms the cabin feel from factory-standard to genuinely modern, without touching a single wire. Whether you drive an early L538 Evoque or the current L551 generation, this kit has been verified for direct fitment across all trim levels. Installation requires no professional expertise — the complete kit including a pry tool can be fitted in under 30 minutes at home, making this one of the most rewarding upgrades in the Victorious range. What's Included 💡 Front Map / Dome Light Model-specific LED bulb for front overhead reading and dome positions 💡 Rear Map / Dome Light Rear passenger overhead illumination — direct replacement bulb 🪞 Vanity Mirror Lights Available in select packages — sun visor mirror illumination 🗄️ Glove Box Light Available in select packages — interior glove compartment LED 📦 Trunk / Boot Light Available in select packages — load area LED replacement 🔧 Installation Pry Tool Trim-safe removal tool included to protect interior panels Product Highlights Super bright LED output for a noticeably improved cabin ambiance 100% Canbus error-free — no dashboard warnings or fault codes True plug-and-play fitment — no wiring, no modifications Up to 50,000 hours operational lifespan — essentially lifetime fit Heat-resistant construction for safe long-term cabin use Clean neutral-white light output matching modern premium interiors Energy efficient — draws significantly less power than OEM halogens Engineered specifically for Land Rover / Range Rover electrical systems Compatible with all trim levels across 2005–2023 model years Includes trim-safe pry tool — no additional tools required Compatibility Model Code Years Fitment Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–2023 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Land Rover Freelander 2 L359 2006–2014 Direct Fit Land Rover Discovery 3 L319 2005–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2023 Direct Fit Range Rover Vogue L460 2022–2026 Verify Before Order Range Rover Sport L461 2022–2026 Verify Before Order Not sure which variant fits your vehicle? Call us on +44 203 943 9919 Mon–Fri, 9am–7pm and we'll confirm your fitment before you order. Installation Guide 🔧 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Included Pry Tool Only Ensure all interior lights are switched off and the ignition is fully off before beginning. Allow any existing bulbs a few minutes to cool if the vehicle has been recently used. Using the included trim-safe pry tool, carefully lever open the lens cover on each light fitting — start at one edge and work around gently to avoid cracking the housing. Remove the existing halogen or incandescent bulb from its socket. Twist or pull depending on your specific fitting type — refer to your Evoque owner's manual if unsure of bulb type. Insert the corresponding LED replacement bulb from this kit. Ensure the pins seat fully into the socket. If LEDs do not illuminate after testing, rotate the bulb 180° — polarity is the most common cause of non-illumination. Snap the lens cover back into position. Turn on the interior lights and verify full illumination. Repeat across all zones included in your selected package. If a bulb feels loose, use a small flat tool to gently widen the metal pin clips inside the socket for a more secure grip. ⚠ Caution: Do not handle removed halogen bulbs immediately after use — they retain significant heat. Allow cooling before disposal. Do not apply excessive force when removing lens covers on the L551 Evoque as the housings use a clip-and-slot retention system that can crack under pressure. Shop by Your Evoque Browse the full accessory range curated specifically for your generation of Range Rover Evoque: 🔗 Evoque L538 (2011–2018) Full accessory collection for first-gen Evoque 🔗 Evoque L551 (2019–2023) Full accessory collection for second-gen Evoque Upgrade Your Evoque Interior Today Thousands of Land Rover and Range Rover owners across the UK and worldwide have transformed their cabins with this exact kit. Join them — and see the difference quality LED lighting makes from the first switch-on. Shop Evoque Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and model references are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Headlamp Protection Headlamp Tint Pre-Cut Film — Range Rover Velar 2017–2020 Precision pre-cut TPU headlamp protection film that shields your Velar's signature LED clusters from stone chips, road debris, and UV degradation — in Blackened or Transparent finish. Range Rover Velar 2017–2020 Top-Grade TPU Self-Healing Pre-Cut Blackened & Transparent Scratch Resistant 2-Piece Kit Overview The Range Rover Velar occupies a unique space in the Land Rover lineup — its flush surfaces, distinctive blade-style LED daytime running lights and sculpted headlamp housings are a defining part of its identity. Keeping those clusters looking pristine is non-negotiable for any Velar owner who takes their vehicle seriously. This pre-cut headlamp tint film is engineered specifically for the 2017–2020 Range Rover Velar, meaning there is no trimming, no guesswork and no wasted material. Made from top-grade TPU (Thermoplastic Polyurethane), the film delivers genuine self-healing properties — minor swirl marks and light surface scratches disappear with the warmth of sunlight or warm water, keeping the finish looking factory-fresh. Available in Transparent (near-invisible protection) and Blackened (a smoked stealth aesthetic), both options preserve full light output while adding a layer of durable defence against stone chips, insects, road grime and UV fading. TPU film at this grade outperforms traditional PVC or vinyl alternatives in longevity, clarity retention and edge-seal durability — qualities that matter on a vehicle designed to be driven hard and admired standing still. Each kit includes application tools, making this a satisfying home installation for any detail-minded owner. What's Included 💡 Pre-Cut Headlamp Film × 2 One piece per headlamp, cut to Velar profile 🛠️ Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step fitting reference 🎨 Choice of Finish Blackened smoked or crystal transparent Product Highlights Precision pre-cut to fit Range Rover Velar 2017–2020 headlamp housings Top-grade TPU material with genuine self-healing surface technology Available in Blackened smoked and Transparent clear finishes Protects against stone chips, road debris and insect damage UV-resistant formulation prevents yellowing and haze over time Scratch-resistant outer layer maintains optical clarity No cutting or trimming required — dry-fit ready out of the pack Preserves full LED light output in both finish options Residue-free removal without damage to headlamp housing Application tools included for a clean, professional finish Compatibility Model Year Range Fitment Range Rover Velar 2017–2020 Direct Fit Range Rover Evoque (L538) 2015–2019 Direct Fit Range Rover Evoque (L551) 2020–Present Direct Fit Discovery Sport (L550) 2016–Present Direct Fit Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Vogue (L405) 2018–Present Direct Fit Range Rover Sport (L494) 2014–2017 Direct Fit Range Rover Sport (L494) 2018–Present Direct Fit Range Rover Sport L461 (2022+) 2022–Present Verify Before Purchase Range Rover Vogue L460 (2022+) 2022–Present Verify Before Purchase Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Included in kit Thoroughly clean both headlamp housings with an isopropyl alcohol wipe to remove all dust, wax, grease and residue. Any contamination beneath the film will cause lifting. Work in a warm, dust-free environment — an indoor garage is ideal. Cold temperatures reduce film flexibility and adhesion quality. Lightly mist the headlamp surface with a slip solution (a few drops of baby shampoo in water works well) to allow repositioning during initial placement. Carefully peel the film from its backing and align it to the headlamp housing, starting from the centre and working outward. Use the included squeegee to push out air bubbles and excess slip solution from the centre towards the edges using firm, overlapping strokes. Carefully tuck and smooth all edges, ensuring full contact around curves and contours of the Velar headlamp profile. Allow the film to cure undisturbed for 24–48 hours before washing the vehicle or exposing the surface to standing water. Note: Ensure the film selected matches your exact model year. Headlamp housings changed between Velar facelifts — if you are unsure of your build date or specification, contact us before ordering at +44 203 943 9919 (Mon–Fri, 9am–7pm). Protect What Makes the Velar Distinctive Stone chips and road debris don't care about resale value. This precision-cut TPU film is the simplest, most effective way to keep your Velar's headlamps looking flawless — whether you choose stealth black or crystal clear. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Exterior Protection Headlamp Tint Pre-Cut Film – Range Rover Velar 2018–2020 Precision pre-cut TPU headlamp tint film engineered to protect and transform the front lighting signature of your Range Rover Velar — available in Blackened Smoke or Crystal Clear. Range Rover Velar 2018–2020 Top TPU Material Self-Healing Scratch Resistant Blackened & Clear Pre-Cut Fit 2-Piece Kit Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — its flush LED headlamps and sleek frontal architecture are central to its visual identity. Keeping those headlamp lenses in pristine condition against stone chips, road debris, UV degradation and daily wear is something every Velar owner should prioritise from day one. This pre-cut headlamp tint film is manufactured from premium Top TPU — the same grade of thermoplastic polyurethane used in professional paint protection applications. Unlike adhesive vinyl films, TPU is optically clear at a molecular level, meaning light output is never compromised. The self-healing surface actively closes minor swirl marks and surface abrasions when exposed to heat, keeping the film looking factory-fresh for years. Available in two finishes — Blackened Smoke for a blacked-out, stealth aesthetic that complements the Velar's already dramatic lines, and Crystal Clear for invisible protection that maintains the OEM look — both options are precision pre-cut to the exact headlamp contours of the 2018–2020 Range Rover Velar, ensuring a seamless, bubble-free install with no trimming required. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels for the Velar headlamps 🛠️ Application Tool Kit Included as a gift to assist with installation 📋 Installation Guide Step-by-step instructions for a clean finish 🎨 Choice of Finish Blackened Smoke or Crystal Clear — select at checkout Product Highlights Precision pre-cut for the Range Rover Velar 2018–2020 — no trimming needed Top-grade TPU material — flexible, durable and optically superior Self-healing surface technology — minor scratches disappear with heat Scratch and abrasion resistant — protects against stone chips and road debris UV-stabilised formula — prevents lens yellowing and hazing over time Available in Blackened Smoke for a stealth look or Crystal Clear for OEM finish Maintains full headlamp light output — zero optical interference Bubble-free adhesive backing — clean, professional finish every time Residue-free removal — will not damage or stain OEM headlamp lenses Includes application tools — everything you need in one package Vehicle Compatibility Vehicle Year Range Fitment Range Rover Velar 2018–2020 Direct Fit Range Rover Velar 2017 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–Present Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2018–Present Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L461 2022–Present Verify Before Purchase Range Rover Vogue L460 2022–Present Verify Before Purchase Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Tools Required Thoroughly clean the headlamp lens surface with an isopropyl alcohol solution and allow to dry completely — any dust or grease will affect adhesion. Work in a warm, dust-free environment. A garage or sheltered area at 15–25°C is ideal. Warmer conditions improve film flexibility and conformity. Lightly mist the headlamp surface with a water and soap solution (wet application method) to allow repositioning during placement. Carefully peel the backing from the pre-cut TPU film, keeping the adhesive side away from surfaces. Align the film to the headlamp contour before committing. Apply the film from the centre outward using the included squeegee tool, working any air bubbles towards the edges progressively. Use a heat gun or hairdryer on a low setting to gently warm the film around curves and edges — this improves adhesion and conformity to complex shapes. Allow 24–48 hours for the adhesive to fully cure before washing the vehicle or exposing the film to heavy rain. ⚠ Note: Ensure the headlamp surface is completely free of wax, polish or ceramic coating residue before application. Residual coatings will significantly reduce adhesive bond strength and may cause lifting at the edges. If your lenses have been previously coated, lightly decontaminate with a clay bar or isopropyl wipe before fitting. Complete Your Velar Build Explore the full Victorious range of Range Rover Velar accessories — from interior refinements to exterior protection — curated exclusively for owners who refuse to compromise. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Range Rover Velar & Evoque · Interior Trim Aluminum Alloy Central Air Conditioning & Volume Knob Trim — Range Rover Velar 2017–2019 & Evoque 2019–2020 Precision-machined aluminum alloy knob ring trims that instantly elevate the tactile quality and visual refinement of your Velar or Evoque's central console. Range Rover Velar 2017–2019 Evoque 2019–2020 Aluminum Alloy 3-Piece Set Peel & Stick Install ISO9001 Certified 4 Colour Options Interior Trim Overview The Range Rover Velar and second-generation Evoque represent two of the most design-forward vehicles in the Land Rover lineup — clean surfaces, considered proportions, and an interior language that rewards those who notice the details. But the factory-finish plastic surrounding the climate and volume knobs has always been the one area where the interior falls just short of its own ambition. These aluminum alloy knob ring trims are engineered specifically for the Velar (2017–2019) and Evoque (2019–2020) centre console layout. Each ring is precision-formed from aerospace-grade aluminum alloy and finished to a standard that complements the vehicles' existing metalwork. Available in four colourways — silver, blue, rose gold, and red — there is an option to match whether your interior leans understated or expressive. ISO9001-certified manufacturing ensures dimensional accuracy for a flush, rattle-free fit. The result is a cabin upgrade that feels factory-intentional rather than aftermarket-applied — the kind of detail that Velar and Evoque owners will notice every single time they reach for the climate controls. What's Included ⭕ Knob Ring Trims × 3 Full set covering AC and volume knobs 🔵 Choice of 4 Finishes Silver, Blue, Rose Gold, or Red 🔧 Pre-Applied Adhesive 3M-style peel-and-stick backing included 📋 Fitment Guide Model-specific placement reference Product Highlights Precision-machined from durable aluminum alloy — not plastic ISO9001-certified production for consistent dimensional accuracy Direct-fit design — no cutting, drilling, or modification required Four finish options: Silver, Blue, Rose Gold, and Red Environmentally responsible materials throughout manufacture Rattle-free fit with flush surface alignment to factory trim Peel-and-stick installation — reversible and residue-minimal Elevates tactile feel every time you adjust climate or volume Complements existing brushed metal interior elements 3-piece set covers all central console knob positions in one kit Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2019 All Variants Direct Fit Range Rover Evoque (L551) 2019–2020 All Variants Direct Fit Range Rover Evoque (L538) 2011–2018 All Variants Not Compatible Range Rover Velar 2020+ All Variants Verify Before Purchase Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Installation Notes ⏱ Estimated Time: 10–15 Minutes  |  Difficulty: Beginner Ensure the vehicle interior is at room temperature — cold surfaces can reduce adhesive performance. Avoid installation below 10°C. Clean each knob base thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue from around the knob collar and allow to dry completely. Dry-fit each ring trim to confirm orientation and alignment before committing. The trims are shaped to sit flush — test the fit without removing the adhesive backing first. Peel the protective backing from one trim at a time. Position carefully over the knob base and press firmly from the centre outward for 30–60 seconds. Repeat for all three trims. Allow the adhesive to cure for at least one hour before subjecting the trims to heat from the climate system. ⚠ Note: Do not apply excessive rotational force directly to the trim rings — they are decorative overlays, not structural components. If a trim lifts at the edges after installation, reapply with a trim-safe adhesive promoter for a more permanent bond. Complete Your Velar or Evoque Interior These knob trims pair beautifully with our wider range of Velar and Evoque interior accessories. Browse the full collection or get in touch with our team for fitment advice — we know these vehicles inside out. Shop Range Rover Velar Accessories Shop Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Velar · Exterior Styling Rear Bumper Lower Diffuser Conversion for Range Rover Velar 2017+ Transform your standard Velar's rear end into the commanding Dynamic specification look — with a precision-engineered lower diffuser conversion that slots cleanly into place. Range Rover Velar 2017 Onwards Rear Diffuser Dynamic Conversion Laser Cut Precision Direct Fit Exterior Styling No Drilling Required Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — an SUV that blends architectural elegance with serious road presence. From launch, the Velar's Dynamic specification set it apart with a more aggressive lower rear treatment, featuring a pronounced diffuser section that gives the car a planted, performance-ready stance. If your Velar left the factory without it, you've likely noticed the difference. This rear bumper lower diffuser conversion is engineered specifically to replicate the Dynamic specification aesthetic on standard-trim Velars. Manufactured to exacting tolerances using laser-cut processes, each piece is shaped to match the precise geometry of the Velar's rear bumper — delivering a seamless result that looks entirely factory-fitted. No filler, no guesswork, no compromise on finish quality. Whether you're looking to complete a full exterior refresh or simply elevate the rear profile of your Velar to match the top-of-the-range spec, this conversion delivers the visual upgrade with the kind of fit and finish you'd expect from a premium aftermarket specialist. It's the detail that makes the difference. What's Included 🔲 Lower Diffuser Panel Dynamic-spec rear bumper lower section conversion piece 🔩 Fitting Hardware All required fixings and mounting clips included 📋 Installation Guide Step-by-step fitment instructions for a clean install ✅ Quality Check Tag Each unit inspected before dispatch Product Highlights Converts standard Velar to Dynamic rear specification Laser-cut manufacturing for precision panel alignment Direct fit — no cutting, drilling or modification required Designed specifically for Range Rover Velar 2017 onwards High-quality construction built to withstand road conditions Seamless integration with existing rear bumper geometry Clean, factory-finish appearance when installed correctly Lightweight — does not affect vehicle dynamics or performance Supplied with all necessary fitting hardware Straightforward installation suitable for home fitting Compatibility Vehicle Year Range Trim Fitment Range Rover Velar 2017 – 2022 Standard / S / SE / HSE Direct Fit Range Rover Velar 2017 – 2022 R-Dynamic (Dynamic Spec) Not Required Range Rover Velar 2023 Onwards (Facelift) All Trims Not Compatible Range Rover Evoque All Years All Trims Not Compatible Range Rover Sport L494 All Years All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Basic Hand Tools Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the rear bumper area. Carefully clean the lower rear bumper area to remove any road grime, wax or debris that may affect panel alignment or adhesion. Test-fit the diffuser conversion panel against the lower bumper to confirm alignment and familiarise yourself with the mounting points before final installation. Locate and engage the supplied mounting clips or hardware into the corresponding fixing points on the existing bumper structure. Press the diffuser panel firmly and evenly into position, working from the centre outward to ensure a flush, gap-free finish along all edges. Verify that all clips are fully seated, check panel alignment from a distance, and confirm no flex or movement is present before signing off the install. ⚠ Please Note: If your Velar is fitted with a tow bar, parking sensors, or aftermarket exhaust exits in the lower bumper area, please contact our team before ordering to confirm fitment compatibility. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Velar the Right Way Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium styling upgrades. Shipped worldwide via DHL, FedEx and UPS — and backed by our 30-day money-back guarantee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations and trademarks are the property of their respective owners and are referenced solely for the purpose of product fitment identification.

Victorious Automotive · Range Rover Velar · Exterior Styling Silver & Black Hood Vent Slats for Range Rover Velar 2017–2019 Transform your Velar's bonnet with precision-finished two-tone vent slat trims that deliver the Dynamic Edition look — no drilling, no fuss, no compromise. Range Rover Velar 2017–2019 Silver & Black Bonnet Vent Trims Peel & Stick Exterior Styling High-Grade ABS No Drilling Required Overview The Range Rover Velar arrived with one of the most architecturally considered silhouettes in the modern SUV era — flush surfaces, flush door handles, and a bonnet line that draws the eye from front to rear. The hood vent apertures are a defining detail of that design, and yet in standard trim, they remain understated. These Silver and Black Hood Vent Slat Trims are designed specifically for Velar owners who want to unlock the full visual intent of that feature. Finished in a polished silver and gloss black two-tone combination, these vent slat inserts slot cleanly into the existing bonnet vent cutouts and replicate the appearance of the Velar's premium Dynamic specification. The contrast between the silver slats and black surround picks out the geometry of the vent with precision, adding visual depth and a purposeful, performance-orientated character without altering the vehicle's original lines. Manufactured from high-grade ABS polymer with a mirror-quality surface finish, these trims are built to resist UV fading, temperature cycling, and the general rigours of daily driving. Installation requires no tools, no adhesive mixing, and no professional fitting — just a clean surface, a few minutes, and the confidence that the result will look factory-correct from day one. What's Included 🔲 Hood Vent Slat Trims (x2) Left and right silver & black inserts for both bonnet vents 📎 Pre-Applied 3M Adhesive Tape High-bond automotive-grade backing, factory-applied to each trim 🧹 Surface Prep Wipe Alcohol cleaning wipe to ensure a clean bond prior to fitting 📄 Fitting Instructions Step-by-step guide included in the box Product Highlights Designed specifically for the Range Rover Velar 2017–2019 bonnet vent apertures Two-tone silver and gloss black finish for a Dynamic Edition aesthetic High-grade ABS construction — resistant to UV, heat, and road vibration Pre-applied 3M automotive adhesive — no separate bonding agents required Tool-free installation completable in under 15 minutes Precision-cut for flush, factory-correct fitment — no gaps or proud edges Does not interfere with bonnet vent function or airflow Non-permanent — fully removable without damage to paintwork Available in three colourways: Silver/Black, Rose Gold, and Full Black Supplied as a complete pair — fits both left and right vents simultaneously Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar (L560) 2017 – 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020 – 2022 All trims Verify Before Purchase Range Rover Evoque (L551) 2019 – 2024 All trims Not Compatible Range Rover Sport (L494) 2013 – 2022 All trims Not Compatible Range Rover Vogue (L405) 2013 – 2021 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and allow the bonnet to cool fully to ambient temperature before beginning installation. Use the included alcohol prep wipe to thoroughly clean the surface of each bonnet vent aperture. Remove all wax, polish residue, and road film. Allow to dry completely — approximately 60 seconds. Test-fit each vent slat trim against its corresponding aperture without removing the adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first trim. Position carefully within the vent aperture, starting from the centre and working outward. Apply firm, even pressure across the full length of the trim for a minimum of 30 seconds to activate the adhesive bond. Repeat for the second vent slat trim on the opposite side. Allow 24 hours before washing the vehicle or exposing the bonnet to heavy rain, to allow the adhesive to reach full cure strength. ⚠ Note: Do not attempt installation in direct sunlight or when ambient temperature is below 10°C, as this will reduce adhesive performance. For best results, install indoors or in a shaded area with a surface temperature between 15°C and 35°C. Complete the Look on Your Velar Explore the full Victorious range of exterior styling accessories for the Range Rover Velar — from mirror caps and grille surrounds to side vents and door trims. Everything you need to finish the build, in one place. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. All rights remain with their respective owners.

Victorious Automotive · Velar / Evoque / Discovery Sport · Exterior Styling Carbon Fibre Mirror Covers – Range Rover Velar, Evoque & Discovery Sport Achieve the premium SVR carbon look on your Velar, Evoque, or Discovery Sport with precision-cut, high-quality carbon TPU mirror covers — no drilling, no modification required. Carbon TPU SVR Look Velar 2017–2020 Evoque 2016–2020 Discovery Sport 2015–2020 Clip-On Fit No Drilling Two-Piece Set Overview The Range Rover Velar, Evoque, and Discovery Sport are vehicles that reward attention to detail. From their sculpted flanks to their carefully considered proportions, they're designed to be noticed — and the exterior mirror housings are among the most visible styling elements on the vehicle. Yet it's the top-specification SVR and Black Pack models that get the carbon fibre treatment from the factory, leaving many owners of standard-specification cars searching for an accessible way to close that gap. These carbon fibre-effect mirror covers are designed to do exactly that. Precision laser-cut from high-quality carbon TPU, they replicate the genuine carbon weave aesthetic found on Land Rover's highest-trim derivatives. The material delivers excellent resistance to UV fading and weathering, ensuring the finish remains sharp and consistent long after installation. The carbon weave pattern is bold without being overdone — exactly the kind of purposeful detail that complements the character of these vehicles. Installation is intentionally simple. Each cover clips cleanly over your existing mirror housing using the included adhesive tape, with no tools, no drilling, and no permanent modification to the vehicle. The laser-cut precision ensures a flush, factory-quality fit against every contour of the mirror. Whether you're building out a full carbon exterior package or simply looking for one considered upgrade, these covers offer an exceptional result for the effort involved. What's Included 🪞 Left Mirror Cover Carbon TPU, precision laser-cut 🪞 Right Mirror Cover Carbon TPU, precision laser-cut 🔧 Adhesive Tape Pre-cut strips for secure fitment 📄 Fitting Guide Step-by-step installation instructions Product Highlights Precision laser-cut carbon TPU for exact panel alignment Replicates the factory SVR carbon mirror aesthetic Clip-and-adhesive installation — no drilling required Adhesive tape included for a secure, long-lasting bond UV and weather-resistant material for outdoor durability Sold as a complete two-piece set (left and right) Compatible with three popular Land Rover model lines Seamless integration with existing carbon interior packages No permanent modification to original mirror housings Fully reversible — originals remain undamaged beneath Compatibility Vehicle Year Range Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Evoque (L538) 2016 – 2020 Direct Fit Land Rover Discovery Sport 2015 – 2020 Direct Fit Range Rover Evoque (L551) 2019 – present Verify Before Order Range Rover Vogue / Sport L494/L405 All years Not Compatible Land Rover Defender L663 All years Not Compatible Unsure about your specific build year or mirror type? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes ⏱ Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean your existing mirror housing with an isopropyl alcohol wipe and allow to dry completely. Remove any wax, polish, or contaminants from the surface. Test-fit each carbon cover over the mirror housing before applying adhesive, confirming alignment and coverage across all edges. Apply the provided adhesive tape strips to the inner face of each cover, following the contours of the housing. Starting from one edge, press the cover firmly onto the mirror housing, working gradually toward the opposite side to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 1 hour before exposing to rain or a car wash. ⚠ Note: Surface temperature affects adhesive performance. For best results, install in dry conditions above 10°C (50°F). Avoid installation in direct sunlight on very hot days, as this can cause premature adhesive curing before the cover is fully positioned. Complete the Carbon Look These mirror covers pair perfectly with our full range of carbon interior and exterior styling parts for the Velar, Evoque, and Discovery Sport. Browse the full collection for your vehicle or get in touch — our team knows these cars inside out. Shop Velar Accessories Shop Evoque Accessories Shop Discovery Sport Buying two or more items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only.

Victorious Automotive · Range Rover / Land Rover · Sport Interior Black Aluminium Gear Shift Paddles for Range Rover & Land Rover — Direct-Fit Steering Wheel Upgrade Precision-machined black aluminium shift paddles that bolt directly onto your existing steering wheel — transforming your cabin's feel and responsiveness in under two minutes. L461 · L460 · L494 · L405 2013–2026 High-Grade Aluminium Matte Black Direct Fit No Drilling Pre-Applied Adhesive Sport Interior Overview Range Rover and Land Rover interiors already set a benchmark for refinement, but the standard gear shift paddles can feel underwhelming — plasticky in texture, modest in size, and lacking the tactile feedback that enthusiastic drivers demand. Whether you're threading through a mountain pass in a Sport L494 or navigating urban streets in a Vogue L460, the steering wheel is your primary point of contact with the vehicle, and it deserves to reflect the same level of ambition you bring to every drive. These black aluminium gear shift paddles are engineered to clip cleanly onto your existing steering wheel stalks, adding instant visual drama and a noticeably more confident gear-change feel. The precision-machined aluminium construction gives each paddle a solid, weighted presence that the OEM plastic simply cannot replicate — and the matte black finish pairs effortlessly with both dark and light interior colour schemes across the Range Rover and Land Rover lineup. Installation requires no tools, no technical experience, and no modifications to your vehicle. The pre-applied adhesive backing bonds securely to the existing paddle surface, and the entire process takes under two minutes. It's one of the highest-impact, lowest-effort interior upgrades available for your vehicle — and the results are immediately noticeable every time you reach for a gear change. What's Included 🎛️ Left Shift Paddle Machined aluminium, matte black finish 🎛️ Right Shift Paddle Machined aluminium, matte black finish 🔧 Pre-Applied Adhesive Backing Factory-applied to both paddles — ready to fit 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-machined from high-grade aluminium alloy for lasting rigidity Matte black finish resists fingerprints and complements dark cabin trims Pre-applied industrial-strength adhesive for a secure, rattle-free bond No drilling, no wiring, and no specialist tools required for fitment Installs directly over OEM paddle stalks in under two minutes Adds weighted tactile feedback to every upshift and downshift Compatible with a wide range of Range Rover and Land Rover model years Designed to complement Sport, SE, HSE, Autobiography, and SVR trims Reversible installation — OEM paddles remain intact underneath Sold as a matched pair for visual symmetry and consistent feel Compatibility Model Code Years Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Velar L560 2018–2022 Direct Fit Defender L663 2020–2026 Verify Before Purchase Discovery Sport L550 2015–2022 Verify Before Purchase Not sure if this fits your exact build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility for your specific VIN and steering wheel variant. Installation Notes ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Difficulty: Beginner Turn your steering wheel to a comfortable working position and ensure the vehicle is stationary with the ignition off. Clean the surface of both existing OEM shift paddles thoroughly using an alcohol wipe or dry microfibre cloth. Remove any dust, grease, or moisture. Allow the surface to dry completely for at least 60 seconds before proceeding. Peel the protective film from the pre-applied adhesive backing on the first aluminium paddle. Align the aluminium paddle carefully over the OEM paddle, ensuring even placement before pressing down. You will have very limited repositioning time once contact is made. Apply firm, even pressure across the entire paddle surface for 30–60 seconds to activate the adhesive bond. Repeat steps 4–6 for the second paddle. Allow a minimum of 30 minutes curing time before driving for optimal adhesion strength. ⚠ Important: Surface cleanliness is critical. Any residual grease or moisture will significantly reduce adhesive performance. Do not attempt to reposition a paddle once the adhesive has made contact with the OEM surface. If you are unsure about your steering wheel variant, please contact our support team before fitting. Upgrade Your Cabin. Elevate Every Drive. Join over 12,300 Range Rover and Land Rover owners who trust Victorious Automotive for premium interior upgrades. Worldwide shipping via DHL, FedEx, UPS and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Range Rover Velar · Exterior Styling Carbon Fiber Door Handle Covers – Range Rover Velar 2017–2018 Upgrade to SVR-inspired carbon fiber door handles in minutes—laser-cut precision, premium TPU, perfect fit every time. L560 Velar 2017–2018 Carbon Fiber 4-Piece Set Clip-On Install Overview Your Range Rover Velar deserves to look as premium as it drives. These carbon fiber door handle covers transform the exterior in seconds, delivering the aggressive, modern aesthetic of the top-tier SVR models without the price tag. Perfect for owners who want individual styling that commands attention on the road. Each set comprises four precision-laser-cut covers engineered to clip seamlessly over your factory handles. We've engineered them from high-quality carbon fiber TPU—a material that balances authentic visual impact with durability and longevity. The adhesion is exceptional; once fitted, they stay exactly where they belong. Installation takes minutes. No drilling, no permanent modifications, no dealer visit required. If you ever want to revert to stock, simply remove them. It's the fastest way to personalize your Velar's exterior. What's Included 🎨 4× Carbon Fiber Covers Front and rear door handle set ✓ Pre-Cut & Ready to Fit Laser-aligned for perfect fitment 📋 Installation Guide Step-by-step instructions included 🛡️ Quality Assurance 30-day money-back guarantee Product Highlights Authentic carbon fiber TPU material with premium finish Laser-cut precision for flawless alignment on all four doors SVR-inspired aesthetic—aggressive, modern, purposeful Clip-on design—zero modifications to factory handles Exceptional adhesion—stays secure in all weather conditions Simple 5-minute installation—no tools, no expertise required Reversible upgrade—remove anytime without residue Lightweight construction—no impact on vehicle dynamics UV-resistant finish maintains color and depth long-term Direct fit for 2017–2018 Range Rover Velar models Compatibility Vehicle Model Year Range Compatibility Range Rover Velar L560 2017–2018 Direct Fit Range Rover Velar L560 2019–2022 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty Level: Beginner | Time Required: 5–10 minutes Clean your factory door handles thoroughly with mild soap and water. Dry completely. Carefully position the first carbon fiber cover over the front-left door handle, ensuring alignment with handle edges. Apply firm, even pressure across the entire cover surface to activate adhesion. Hold for 10 seconds. Repeat steps 2–3 for the remaining three handles (front-right, rear-left, rear-right). Allow adhesive to cure for 24 hours before opening doors or exposing to moisture. Pro Tip: Warm the adhesive slightly (blow dryer on low heat, 30 seconds) to enhance bonding on cold days. Do not force installation—if a cover doesn't sit flush, remove and reposition. Upgrade Your Velar Today Premium carbon fiber styling shouldn't require a dealer visit or a premium price. These handles prove it. SVR-level aesthetics, genuine materials, and install-it-yourself simplicity. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names and trademarks belong to their respective rights holders.

Victorious Automotive · Range Rover Evoque L538 · Exterior Trim Land Rover Rear Tailgate Trim — Range Rover Evoque L538 (2013–2020) A precision-engineered ABS tailgate trim designed to restore, refine, and elevate the rear appearance of your Range Rover Evoque with a seamless, factory-matched finish. Evoque L538 2013–2020 ABS Plastic Rear Tailgate Exterior Trim Direct Fit No Drilling Multiple Colours Overview The Range Rover Evoque L538 is one of Land Rover's most design-led vehicles — a compact luxury SUV where every panel, surface, and detail contributes to its distinctive presence on the road. The rear tailgate, in particular, is one of the most visible surfaces, and over time its trim can suffer from UV fade, minor scuffs, or simply fall short of the sharp aesthetic Evoque owners expect. This rear tailgate trim has been developed specifically for the 2013–2020 Evoque L538 platform. Manufactured from premium-grade ABS plastic, it follows the exact contours of the tailgate surround and is available in multiple finishes to complement your vehicle's colour scheme — whether that's a gloss black accent, a body-matched panel, or a brushed silver tone. Every edge, recess, and mounting point has been replicated to deliver a fitment that feels original, not aftermarket. Installation requires no specialist tools or permanent modifications — the trim fastens via the factory mounting points already present on the tailgate. The result is an immediate upgrade that tightens the rear aesthetic, frames the tailgate cleanly, and gives your Evoque the kind of polished rear-end presence that holds up at any angle. What's Included 🔲 Rear Tailgate Trim (×1) Pre-shaped ABS panel for Evoque L538 tailgate 📋 Installation Guide Step-by-step instructions included in the box 🔩 Mounting Hardware Clips and fixings for secure, no-drill fitment 📦 Protective Packaging Foam-lined box to ensure safe delivery Product Highlights Precision-engineered for direct fitment on the Range Rover Evoque L538 (2013–2020) Constructed from high-grade ABS plastic — impact-resistant and UV-stable Available in multiple finish options to suit your vehicle's exterior colour Follows factory contours exactly for a seamless, OEM-quality appearance No drilling required — uses existing tailgate mounting points Resists warping, cracking, and discolouration in all weather conditions Enhances the rear-end aesthetic by framing the tailgate cleanly Ideal for replacing faded, cracked, or missing original trim pieces Lightweight construction — no added load on the tailgate mechanism Straightforward DIY installation achievable in under 30 minutes Compatibility Model Code Years Fitment Range Rover Evoque L538 2013–2020 Direct Fit Range Rover Evoque L551 (2021+) 2021–Present Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 5 L462 2017–2022 Not Compatible Land Rover Defender L663 2020–Present Not Compatible Not sure about your vehicle? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool (optional) Open the rear tailgate fully and clean the existing trim area thoroughly with an isopropyl alcohol wipe to remove any dirt, grease, or residue. If replacing an existing trim piece, use a plastic trim removal tool to gently unclip the old trim from its mounting points — work around the perimeter carefully to avoid cracking adjacent panels. Dry-fit the new tailgate trim to confirm alignment against all factory mounting points before final installation. Beginning from one end, press the trim firmly into position along the mounting clips, working evenly across the full length of the panel to avoid stress on any single point. Once seated, apply firm pressure across the entire trim surface to ensure all clips are fully engaged and the panel sits flush with the surrounding bodywork. Step back and inspect the fit from a distance — check for any gaps, misalignment, or raised edges before closing the tailgate. ⚠ Important: Confirm your exact Evoque model year before fitting. The L538 and L551 share a similar visual profile but have different tailgate dimensions. Always verify compatibility using your VIN or registration plate prior to installation. Built for Evoque Owners Who Don't Compromise Every product at Victorious Automotive is selected for owners who hold their vehicles to the same standard the factory intended — or higher. This tailgate trim is no different. Restore the rear-end detail your Evoque deserves. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Velar · Interior Trim Aluminum Alloy Door Speaker Cover Panel Trim — Range Rover Velar 2017–2018 (Set of 4) Precision-cut aluminum alloy speaker panel covers that elevate your Velar's interior finish with a clean, factory-complementary aesthetic — no drilling, no cutting, no compromise. Range Rover Velar 2017–2018 Aluminum Alloy Silver Finish Set of 4 No-Drill Fit ISO9001 Certified Model LLK1149 Overview The Range Rover Velar redefined what a Land Rover interior could feel like — minimalist, refined, and deliberately precise. It's a cabin that rewards attention to detail, which is exactly why owners of the 2017 and 2018 Velar look for ways to complement rather than disrupt that original design language. These aluminum alloy door speaker cover panels are engineered specifically for the Velar's four door openings, sitting flush over the existing speaker grille surrounds to introduce a subtle metallic upgrade that reads as both premium and purposeful. The silver brushed finish pairs naturally with the Velar's existing trim palette, whether your interior runs in light or dark upholstery tones. Constructed from aircraft-grade aluminum alloy and certified to ISO9001 manufacturing standards, these covers are built with the same rigour you'd expect from the vehicle itself. Installation requires no permanent modification — the panels attach securely via pre-applied double-sided tape, meaning fitment takes minutes and leaves no trace if removed. What's Included 🔲 Front Left Speaker Cover Driver-side front door panel 🔲 Front Right Speaker Cover Passenger-side front door panel 🔲 Rear Left Speaker Cover Driver-side rear door panel 🔲 Rear Right Speaker Cover Passenger-side rear door panel 📎 Pre-Applied 3M Tape Double-sided adhesive, factory-applied to each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Full set of 4 covers — all doors included in one purchase Premium aluminum alloy construction throughout Silver brushed finish complements Velar's interior palette ISO9001 certified manufacturing standards No drilling or permanent modification required Pre-applied double-sided tape for clean, secure fitment Precision die-cut to match Velar door panel geometry Lightweight at 258g total — no added bulk or panel stress Residue-free removal if reinstallation is ever needed Direct replacement aesthetic over factory speaker surrounds Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017 All Trims (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2018 All Trims (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 All Trims Verify Before Purchase Range Rover Evoque L551 2019–2024 All Trims Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 15–20 Minutes  |  Tools Required: None Begin with a clean, dry interior. Use a microfibre cloth to wipe down each door speaker surround area, removing any dust, oils, or residue that could affect adhesion. Dry-fit each panel cover before committing — hold it against the speaker area to confirm alignment and verify the piece sits flush with the door card surface. Peel the protective backing from the pre-applied double-sided tape on the rear of the first panel cover. Carefully align the cover over the speaker grille surround, starting from one edge and pressing down progressively to avoid air bubbles or misalignment. Apply firm, even pressure across the full surface of each cover and hold for 30–60 seconds to activate the adhesive bond. Repeat for all four door panels. Allow 1–2 hours before any heavy door use to allow the adhesive to fully cure. ⚠ Note: For best results, install in a warm environment (above 15°C / 59°F). Cold surfaces reduce adhesive effectiveness. Avoid applying in direct sunlight or on surfaces that are damp. Do not attempt to reposition once the tape has made contact with the panel. Complete Your Velar's Interior Browse our full Range Rover Velar accessories collection — from carbon fibre trim upgrades to gear selector surrounds, every piece is selected to respect the vehicle's original design intent. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If you are unsure, contact our team at +44 203 943 9919 before ordering.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Aluminium Door Speaker Panel Trim for Range Rover Velar 2017–2018 Precision-cut aluminium alloy speaker surround panels that replace the factory plastic trim and instantly elevate the door card aesthetics of your Velar's interior. Range Rover Velar 2017–2018 Aluminium Alloy Silver Finish Interior Trim LLK1146 ISO9001 Certified No Drilling Required Overview The Range Rover Velar arrived as a design-forward statement from Land Rover — a vehicle where interior detailing was elevated to something genuinely considered. Every surface, every material choice in the Velar's cabin was deliberate. The speaker panels on the door cards are a prime example: they sit in your sightline every time you glance at the door, and the stock plastic surrounds, while functional, do little justice to the cabin's overall intent. These silver aluminium alloy door speaker panel trims are designed specifically for the 2017 and 2018 Range Rover Velar. Machined from lightweight aluminium alloy, they deliver a cooler, more refined surface finish compared to the factory plastic — catching ambient light in the way that premium materials do. The silver tone pairs naturally with the Velar's interior colour palette, complementing brushed trim inserts and contrasting tastefully against both light and dark upholstery choices. Installation requires no modification whatsoever. Each panel is backed with high-strength automotive double-sided tape, meaning a clean fit with no tools, no drilling, and no permanent changes. If you're the sort of owner who values the Velar's design language and simply wants the interior details to reflect that more completely, these trims are a straightforward, satisfying upgrade. What's Included 🔊 Door Speaker Panel Trims Full set of aluminium alloy surrounds for door speaker apertures 🔲 Pre-Applied Adhesive Tape High-bond automotive double-sided tape pre-fitted to each panel 📄 Installation Instructions Step-by-step guide included for clean, accurate fitment Product Highlights Precision-cut aluminium alloy construction for lasting quality Silver finish complements the Velar's premium interior palette Manufactured to ISO9001 quality management standards Pre-applied automotive-grade double-sided adhesive tape No drilling, cutting, or permanent modification required Direct OEM-location fitment — designed specifically for Velar door cards Lightweight at 524g total — no impact on door function or feel Significantly upgrades the visual quality over factory plastic surrounds Reversible installation — can be removed without damage Fully compatible with factory door speaker and audio systems Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017–2018 All Trim Levels (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 Post-facelift Models Verify Before Purchase Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Defender L663 2020–2024 All Variants Not Compatible If your Velar is a 2019 or later model, please contact us on +44 203 943 9919 before ordering so we can confirm fitment for your specific build date. Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the door card surfaces around the speaker apertures are free from dust, grease, or any residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit each panel against the speaker surround before removing the adhesive backing. Confirm alignment and positioning carefully against the factory speaker grille location. Once satisfied with alignment, peel back approximately one third of the tape backing. Carefully position the leading edge of the panel, pressing firmly as you peel and lay the remainder of the tape. Apply sustained firm pressure across the entire panel surface for 30–45 seconds to ensure full adhesive contact with the door card. Repeat for all remaining door speaker panels. Allow 30 minutes before closing doors or applying lateral pressure to the trim. ⚠ Note: Do not attempt installation in cold temperatures below 10°C — adhesive performance may be reduced. If installing in cooler conditions, warm the door card surface gently with a heat gun on a low setting before applying panels. Upgrade Your Velar's Interior Browse the full range of Range Rover Velar interior accessories at Victorious Automotive — curated specifically for owners who hold their vehicle to a higher standard. Shop Range Rover Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Console Trim for Land Rover Range Rover Velar 2017 2018 A precision-cut ABS silver console upgrade trim that instantly elevates the centre console aesthetic of your Range Rover Velar with a clean, factory-complementary finish. Range Rover Velar 2017–2018 ABS Material Silver Finish Interior Trim No-Drill Fit ISO9001 Certified Model: LLK1350 Overview The Range Rover Velar arrived in 2017 as one of Land Rover's most design-forward statements — an interior shaped by restraint, precision, and a clear commitment to visual clarity. Every surface in the Velar's cabin was considered, and owners who want to preserve or sharpen that sense of premium detail understand that even small upgrades need to be done properly. This silver console trim is engineered specifically for the 2017 and 2018 Range Rover Velar and is designed to sit seamlessly within the existing centre console architecture. Manufactured from high-grade ABS plastic with a silver finish, it matches the Velar's existing trim language without overpowering it — bringing a subtle metallic lift to an interior zone that sees constant daily interaction. At 55cm in length and weighing just 500g, the trim is slim, precisely dimensioned, and straightforward to install using the pre-applied automotive-grade adhesive tape already bonded to the rear face. No drilling, no cutting, no specialist tools — just a clean, lasting result that looks as though it belonged there from the factory floor. What's Included 🪄 Silver Console Trim Panel ABS silver finish, model LLK1350 🔲 Pre-Applied Adhesive Tape Automotive-grade, bonded to rear face 📋 Fitting Guide Basic installation reference included Product Highlights Precision-fit design for Range Rover Velar 2017 and 2018 models High-grade ABS construction with durable silver finish Pre-applied automotive adhesive tape for clean, tool-free installation ISO9001 certified manufacturing process for quality assurance Lightweight at 500g — no stress on existing trim or panels Dimensionally accurate at 55cm × 30cm × 10cm for precise fit Complements the Velar's existing interior trim without clashing No drilling, cutting, or permanent modification required Factory-look finish that integrates naturally with OEM surfaces Designed and tested by metyoucar, a specialist interior trim brand Compatibility Vehicle Year Trim Level Fitment Range Rover Velar 2017 All variants Direct Fit Range Rover Velar 2018 All variants Direct Fit Range Rover Velar 2019–2022 All variants Verify Before Purchase Range Rover Sport L494 2013–2020 All variants Not Compatible Range Rover Evoque L538 All years All variants Not Compatible Range Rover Vogue L405 All years All variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the centre console surface is free from dust, grease, and any existing polish or wax residue — isopropyl alcohol works well for this. Dry-fit the trim panel first to confirm alignment and positioning before committing to adhesion. The panel should sit flush and natural against the console contours. Once satisfied with positioning, peel back the protective liner from the pre-applied automotive adhesive tape on the rear face of the trim. Carefully align the trim from one end and press firmly along the full length, applying consistent pressure for 30–60 seconds to ensure full bond contact. Allow the adhesive to cure for a minimum of 1 hour before exposing the area to heat, sunlight, or significant handling. Full bond strength is typically achieved within 24 hours. ⚠ Note: Avoid installation in cold environments below 10°C as this can reduce initial adhesive performance. Do not attempt to reposition the trim once the adhesive has made contact with the console surface — the bond is designed to be permanent. Complete Your Velar Interior Browse our full collection of Range Rover Velar accessories — from interior trim upgrades to exterior styling pieces — curated specifically for the Velar's unique design language. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiary brands. All vehicle names, model references, and trademarks are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious · Range Rover Sport L494 · Interior Trim Red Carbon Fiber Steering Wheel Trim for Range Rover Sport & Velar Instantly elevate your steering wheel with a vibrant red carbon finish that delivers SVR-inspired aggression without compromise. L494 / L560 2014–2020 Carbon TPU Clip-On Fit UK Stock Overview The Range Rover Sport L494 and Range Rover Velar L560 have always demanded interior appointments that match their commanding presence. This Red Carbon Fiber Steering Wheel Trim transforms that focal point into a statement piece—blending premium aesthetics with functional durability in a way that factory trim simply cannot. Constructed from high-quality carbon TPU, this trim is precision laser-cut to clip seamlessly over your existing steering wheel surround. The vibrant red carbon finish creates an aggressive, performance-oriented look that harks to SVR heritage while remaining elegant enough for daily driving. Whether you're refreshing a Sport or adding character to a Velar, this upgrade speaks to your commitment to detail. Installation is straightforward: no adhesive, no drilling, no permanent modifications. Simply clip into place and enjoy an interior that reflects who you are as a driver. What's Included 📦 Steering Wheel Trim Precision laser-cut carbon TPU 🛠️ Clip-On Installation No adhesive or tools required 📋 Fitting Guide Step-by-step instructions included ✔️ Quality Assurance 30-day money-back guarantee Product Highlights Seamless clip-on design—no permanent modifications Precision laser-cut for exact factory-spec fitment High-quality carbon TPU construction resists wear and fading Vibrant red carbon finish adds instant visual impact Lightweight and non-intrusive—preserves steering feel Direct fit for L494 and L560 steering wheels Easy removal if desired—completely reversible Complements SVR-spec and standard models alike Fully cured and pre-finished—ready to install UV-resistant material maintains color integrity Compatibility Vehicle Model Years Compatibility Range Rover Sport 2014–2019 (L494) Direct Fit Range Rover Velar 2017–2020 (L560) Direct Fit Range Rover Sport 2022+ (L461) Not Compatible Range Rover Vogue All Models Not Compatible Defender All Models Not Compatible Note: Verify your vehicle's steering wheel diameter and trim design before ordering. This product is engineered for the specific steering wheel geometry of the L494 Sport and L560 Velar. Installation Difficulty: Easy | Time: 10–15 minutes Ensure steering wheel is in the straight-ahead position. Carefully inspect the existing trim for dust or debris. Clean if necessary. Begin at the top of the steering wheel and gently press the carbon trim clip into the groove, working downward on both sides. Ensure clips are fully seated and the trim sits flush against the existing wheel surround. Gently test the fit by running your finger along the seams to confirm secure placement. Step back and admire your upgraded interior. ⚠️ Important: Do not force the trim into place. If resistance is felt, stop and recheck alignment. Forcing may damage clips or the steering wheel. Ensure your steering wheel matches the specifications in the compatibility table before proceeding. Ready to Transform Your Interior? This Red Carbon Fiber Steering Wheel Trim is a statement piece that separates discerning Range Rover owners from the rest. Clip it on, feel the difference, and let your steering wheel reflect your commitment to excellence. Shop Now Use code 22GET20 to save 20% when ordering any 2 items. ⭐ 4.9/5 — 12,300+ verified reviews 🌍 Worldwide — DHL, FedEx, UPS, TNT 💰 30-Day — Money-back guarantee ☎️ +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with, endorsed by, or manufactured by Jaguar Land Rover Ltd. Range Rover, Sport, and Velar are registered trademarks of JLR. All vehicle references are for fitment compatibility only.

Victorious Automotive · Range Rover Velar · Interior Trim Sands Wood Grain ABS Door Trim Set for Range Rover Velar 2017–2020 Transform your Velar's cabin with a precision-cut, clip-on wood grain door trim set that delivers the elevated SVR aesthetic — no drilling, no modifications, no compromise. Range Rover Velar 2017–2020 ABS / TPU Wood Grain Finish 4-Piece Set Clip-On Fit SVR Look No Drilling Overview The Range Rover Velar was designed from the outset to occupy a unique space in the Land Rover lineup — a vehicle where architecture and interior refinement are taken as seriously as capability. Yet for many owners of the standard and SE trim levels, the interior door panels can feel underwhelming against the Velar's undeniably bold exterior presence. This Sands Wood Grain ABS Door Trim set is purpose-built to close that gap. Crafted from high-quality TPU with a premium Sands wood grain surface finish, each piece is laser-cut to the exact profile of the Velar's door trim panels. The result is a seamless, factory-quality appearance that closely mirrors what you'd find in top-specification and SVR-inspired Velar builds — without the cost of a full interior retrofit. Part of our broader Wood Grain Interior Package series, these door trims are designed to work in harmony with matching dashboard, console, and pillar pieces for a fully cohesive cabin transformation. Whether you're upgrading for personal enjoyment or enhancing resale presentation, this is one of the most impactful interior changes you can make to your Velar. What's Included 🚪 Front Left Door Trim Driver-side panel, laser-cut to profile 🚪 Front Right Door Trim Passenger-side panel, matched finish 🚪 Rear Left Door Trim Rear driver-side, clip-on ready 🚪 Rear Right Door Trim Rear passenger-side, full set completion Product Highlights Precision laser-cut ABS panels for a flawless, gap-free fit on the Velar door cards Premium Sands wood grain TPU surface finish — rich, tactile, and refined Clip-over installation onto existing door trim panels — zero permanent modification Complete four-piece set covering all four door positions for a symmetrical interior upgrade Delivers the elevated SVR-inspired interior aesthetic at a fraction of the cost Resistant to fading, warping, and UV degradation in daily driving conditions Part of Victorious Automotive's full Wood Grain Interior Package for the Velar Lightweight construction — no additional load or stress on existing trim fixings Works with all standard Velar interior colour configurations from 2017–2020 Tool-free installation completable in under 30 minutes by any owner Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 Base / S / SE / R-Dynamic SE Direct Fit Range Rover Velar 2021–2022 Facelift Models Verify First Range Rover Velar 2023+ All Trims Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 All Years All Trims Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔧 Tools Required: None Start with the vehicle parked and all four doors fully open for clear, comfortable access to each panel. Clean the existing door trim surface with a dry microfibre cloth to remove any dust, oils, or residue that could affect the clip seating. Dry-fit each trim piece against its corresponding door panel before committing — confirm the laser-cut edges align precisely with the factory panel border. Beginning with the front driver's door, align the top edge of the wood grain trim to the factory panel and press firmly from the centre outward, engaging each clip point in sequence. Repeat for the remaining three doors — front passenger, rear driver, rear passenger — checking each piece seats flush with no visible gaps at the edges. Apply gentle, even pressure across the full face of each trim piece to ensure all clips are fully seated and the finish sits uniform. ⚠ Note: If your Velar has aftermarket door panels or has previously had interior repairs, clip alignment may vary slightly. Dry-fit all pieces thoroughly before final installation. Do not force any panel — all clips should engage with light, steady pressure only. Elevate Every Journey in Your Velar The interior of your Range Rover Velar deserves the same attention you gave its exterior. This wood grain door trim set is the easiest, most rewarding upgrade you can make to your cabin — and it takes less time to fit than your morning coffee run. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious · Discovery / Velar · Interior Trim Carbon Fiber Seat Trim for Discovery 5 & Range Rover Velar Premium carbon TPU seat surround upgrade delivers SVR-inspired aesthetics with clip-on simplicity. carbon3 2014–2020 Carbon TPU Clip-On Install Pair Included Overview If you own a Discovery 5 or Range Rover Velar from 2014–2020, you understand the appeal of purposeful design meets luxury refinement. Your interior deserves details that match that philosophy. Our Carbon Fiber Seat Trim elevates the door control area with a motorsport-inspired finish that transforms how your cabin feels every time you drive. These trims are precision laser-cut from durable carbon TPU, engineered to fit seamlessly over the factory seat surround. They're not mere surface upgrades—they're built to endure daily use while maintaining that coveted high-gloss finish. Installation takes minutes with the clip-on design, no tools required. Whether you're chasing the aggressive SVR look or simply want to inject genuine character into your interior, this pair delivers. Thousands of Discovery and Velar owners trust Victorious for their cabin upgrades. Join them. What's Included 🎯 Pair of Seat Trims Left and right carbon fiber covers 📦 Installation Guide Step-by-step instructions included ✓ 30-Day Guarantee Money-back if not satisfied 🚚 Worldwide Shipping DHL, FedEx, UPS, TNT available Product Highlights Precision laser-cut for perfect fitment Durable carbon TPU construction Clip-on installation—no drilling required Resists fingerprints and UV fading Achieves authentic SVR styling Fits both front seat surrounds Lightweight carbon-look finish Professional motorsport aesthetic Compatible with OEM interior trim 30-day money-back guarantee Compatibility Vehicle Model Year Range Status Land Rover Discovery 5 2014–2020 Direct Fit Range Rover Velar 2018–2022 Direct Fit Discovery Sport 2015–2020 Not Compatible Range Rover Evoque All Years Not Compatible Installation Difficulty: Easy | Time: 10 minutes Open both front doors and inspect the factory seat control surround on each side. Gently grip the top edge of the existing cover and unclip it from the seat frame. Align the new carbon fiber trim with the clip points on the seat structure. Press firmly until you hear and feel a secure click on all anchor points. Close doors and inspect for even alignment and gaps. Note: Ensure your vehicle engine is off and doors are wide open for comfortable access. If clips feel tight, do not force—gently rock the trim side-to-side as you press down. Ready to Elevate Your Interior? These carbon fiber seat trims are a statement piece that catches light and attention every drive. Premium materials, flawless fitment, and a design philosophy that respects your Land Rover's DNA. Shop with confidence—backed by our 30-day guarantee and 4.9/5-star rating from 12,300+ verified owners. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or any official manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Dashboard Trim — Range Rover Velar 2017–2020 Instantly elevate your Velar's cabin with a precision-cut matte silver dashboard control trim that delivers the SVR aesthetic without lifting a screwdriver. Range Rover Velar 2017–2020 Matte Silver ABS TPU Clip-On Fit SVR Look Interior Trim No Tools Required Overview The Range Rover Velar introduced one of the most refined and minimalist interiors ever seen in a production SUV — a clean, driver-focused cockpit defined by seamless surfaces and a near-buttonless dashboard. It's a space that rewards attention to detail, and even subtle upgrades are immediately noticeable to anyone who knows the car. This ABS matte silver dashboard control trim is engineered specifically for the 2017–2020 Range Rover Velar. Laser-cut to match the exact contours of the existing dashboard panel, it clips directly over the factory surface with no adhesive, no drilling, and no modification of any kind. The matte silver TPU finish introduces a premium, tactile contrast to the Velar's typically dark interior palette — closely mirroring the interior specification found on top-tier SVR and HSE Dynamic derivatives. Whether you're building out a full interior package or simply refreshing the cabin with a single accent piece, this trim is one of the most cost-effective ways to change the visual character of your Velar's centre dashboard zone. The clip-on design means it's reversible at any time — perfect if you're keeping the car near-standard for resale while still enjoying a more personalised drive every day. What's Included 🪄 Dashboard Trim Panel Matte silver ABS TPU, laser-cut to Velar spec 📎 Pre-Fitted Clips Factory-aligned retention clips, no extras needed 📄 Installation Guide Simple step-by-step fitting instructions included 🛡️ Protective Packaging Foam-padded to prevent transit scratches Product Highlights Precision laser-cut for an exact, flush fit on the Velar dashboard Clip-over installation — no tools, adhesive, or drilling required Premium matte silver TPU finish resists fingerprints and glare Fully reversible — restores to factory standard in minutes Replicates the SVR and HSE Dynamic interior specification Compatible with all trim levels across the 2017–2020 Velar range Part of a wider Velar interior package for a coordinated look Lightweight construction with no impact on dashboard function Durable ABS core maintains shape in high cabin temperatures Ships worldwide via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S / SE / R-Dynamic SE / HSE / HSE Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Verify Before Order Range Rover Velar SVAutobiography 2017–2020 SVAutobiography Dynamic Direct Fit Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 All Years All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 5–10 Minutes  |  🛠 Tools Required: None Ensure the existing dashboard surface is clean and free from dust or oils — a dry microfibre cloth works well. Remove the trim piece from its protective packaging and orient it correctly against the dashboard control zone to confirm alignment before fitting. Starting from one edge, align the integrated clips with the factory panel edges and apply gentle, even pressure along the trim length. Work along the full length of the piece, pressing each clip into place until you hear or feel a secure engagement at each point. Run your finger along the full perimeter to confirm a flush, gap-free fit against the dashboard surface. No adhesive or finishing required. Note: Avoid forcing the trim if resistance is felt — recheck alignment before applying further pressure. Do not use heat guns or adhesives, as these may damage the factory dashboard surface or void your vehicle warranty. Complete Your Velar Interior This dashboard trim is part of our full Range Rover Velar interior accessory collection. Pair it with matching silver accent pieces for a truly coordinated cabin transformation. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Window Switch Surround Trims for Range Rover Velar 2017–2020 Bring factory-specification refinement to your Velar's door panels with a set of precision-cut matte silver window switch surrounds — installed in under two minutes, no tools required. Range Rover Velar 2017–2020 ABS Plastic Matte Silver 4-Piece Set No-Tool Fit Pre-Applied Adhesive Interior Trim Overview The Range Rover Velar set a new standard for interior design when it arrived in 2017 — clean surfaces, architectural lines, and a level of cabin sophistication that felt genuinely progressive. Yet even in standard specification, certain details that feature on higher-grade Velar variants are noticeably absent, and the window switch surrounds are one of those details. On S, SE, and HSE trim levels, the door cards can look comparatively plain without them. These matte silver window switch surround trims are precision-formed from high-quality ABS and finished in a brushed matte silver tone that closely matches the OEM aesthetic found on top-specification Velar models. Each piece is dimensionally matched to the Velar's door panel switch cluster, sitting flush and cleanly without any visible gaps or misalignment. The result is a cabin that looks more considered, more complete — exactly as it should. The upgrade is one of the most effective interior modifications available for the Velar. The switch surrounds are a focal point every time a door is opened, and the transition from bare plastic to a refined silver accent is immediately noticeable. Whether you're preparing your Velar for sale or simply want the interior to reflect what the car should have come with from the factory, this is a fast, affordable, and reversible way to achieve it. What's Included 🪟 Front Left Surround Driver-side door switch trim, pre-cut to fit 🪟 Front Right Surround Passenger-side door switch trim, pre-cut to fit 🪟 Rear Left Surround Rear driver-side door switch trim 🪟 Rear Right Surround Rear passenger-side door switch trim 🔧 Pre-Applied 3M Adhesive Factory-grade bonding tape on each piece 📋 Fitment Instructions Step-by-step guide included in packaging Product Highlights High-grade ABS construction — durable, lightweight, and warp-resistant Matte silver finish replicates OEM top-specification Velar appearance Full four-piece set covering all four door switch clusters Pre-applied 3M-grade adhesive backing on every piece Installs in under two minutes — no tools, no drilling, no damage Dimensionally precision-cut for a flush, gap-free fit on Velar door panels Fully reversible — can be removed cleanly without marking the door card Resistant to UV fading and interior temperature fluctuations Matches existing Velar interior silver accents for a cohesive, factory look Compatible with all Velar trim levels from 2017 to 2020 model years Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017 – 2020 S Direct Fit Range Rover Velar 2017 – 2020 SE Direct Fit Range Rover Velar 2017 – 2020 HSE Direct Fit Range Rover Velar 2017 – 2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017 – 2020 First Edition / SV Autobiography Verify First Range Rover Velar 2021 – 2023 All Variants (Facelift) Not Compatible Range Rover Sport L494 2013 – 2020 All Variants Not Compatible Range Rover Evoque L538 2011 – 2018 All Variants Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Difficulty: Beginner  ·  🛠 Tools Required: None Begin with clean, dry door panels. Use an isopropyl alcohol wipe to degrease the surface around each window switch cluster — this ensures the adhesive bonds correctly and maximises long-term hold. Unpack all four trims and orient each piece correctly before removing any adhesive backing. Take a moment to dry-fit each trim over its corresponding switch cluster to confirm alignment. Peel the protective backing from the 3M adhesive on the first trim piece. Carefully position it over the switch cluster, aligning the cutouts precisely with each button before pressing down. Apply firm, even pressure across the entire surface of the trim for approximately 30 seconds. Work from the centre outward to eliminate any air pockets beneath the adhesive layer. Repeat for all four door panels. Allow 30–60 minutes before using the window switches, giving the adhesive time to fully cure at room temperature. Note: Do not apply in temperatures below 10°C — the 3M adhesive requires adequate ambient warmth to bond effectively. If fitting in a cold garage, allow the vehicle interior to warm up naturally before installation. Do not stretch or force the trim pieces — they are precision-cut and should lay flat without pressure adjustment. Elevate Every Detail of Your Velar The interior details are what you live with every day. These window switch surrounds are a small change that makes a genuine difference — and they take less time to fit than it took to read this page. Shop All Velar Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of product compatibility identification. This product is an aftermarket accessory and is not a genuine JLR part.

Victorious · Range Rover Velar · Interior Trim Carbon Fiber ABS Chrome Dashboard Trim for Range Rover Velar 2017–2018 Premium carbon fiber dash accent that transforms your Velar's interior with race-inspired styling and precision fitment. VELAR 2017–2018 Carbon Fiber ABS Direct Fit Adhesive Install ISO 9001 Certified Overview The Range Rover Velar is all about understated elegance and modern minimalism. This carbon fiber dashboard trim is engineered to enhance that design language while adding a subtle performance edge to your cabin. Finished in authentic carbon fiber with chrome accents, it's the kind of detail that catches the eye of those who truly appreciate their machine. Crafted from premium automotive-grade ABS plastic with genuine carbon fiber laminate, this trim piece fits the dashboard perfectly on 2017–2018 Velar models. At just 40 grams and engineered to OEM tolerances, it integrates seamlessly without adding weight or compromising the cabin's clean lines. Installation is straightforward—professional-grade adhesive tape on the back ensures a permanent, damage-free bond that won't lift or peel. No drilling, no modification, no guesswork. This is the kind of upgrade that feels like it came from the factory. What's Included ✓ Carbon Fiber Dashboard Trim LLK1398 model, precision-fit ✓ Pre-Applied Adhesive Tape Professional automotive-grade backing ✓ Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fiber finish with chrome trim details Premium ABS base material—lightweight and durable OEM-spec tolerances for perfect Velar fitment ISO 9001 certified manufacturing Pre-applied professional adhesive—no messy glue needed Factory-clean appearance—looks like OEM equipment Minimal weight—only 40 grams Dimensions: 20cm L × 8cm W × 3cm H Reversible installation without permanent damage Completes any Velar interior upgrade package Compatibility Vehicle Year Range Fitment Range Rover Velar 2017–2018 Direct Fit Range Rover Velar 2019–2022 Not Compatible Installation Installation Difficulty: Easy | Time: 5–10 minutes Prepare the surface. Clean the dashboard area where the trim will sit with a microfiber cloth and mild soap. Ensure the surface is completely dry and free of dust and oils. Position the trim. Carefully place the carbon fiber trim on the dashboard. Align it precisely using the factory contours as your guide. Step back and verify placement before securing. Apply adhesive. Peel back a small section of the pre-applied adhesive tape backing. Press that section firmly onto the dashboard for 10 seconds to anchor it. Secure fully. Working from the anchored end, gradually peel the backing tape away and press the entire trim into place. Use steady, even pressure across the full surface. Final press. Once fully adhered, press firmly across the entire trim for 30 seconds to ensure maximum bond strength. Allow 24 hours for the adhesive to fully cure before exposing the trim to heat or moisture. ⚠ Note: Do not attempt installation in direct sunlight or temperatures above 25°C (77°F). Cold adhesive sets faster and bonds more reliably. If you need to remove the trim later, use a heat gun on low setting to gently soften the adhesive before peeling. Complete Your Velar's Interior Carbon fiber trim is the finishing touch that separates a well-maintained Velar from a truly exceptional one. This is the kind of detail work that builds confidence in your vehicle—and in yourself as an owner who cares. Explore Velar Upgrades Use code 22GET20 for 20% off any 2 items. 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ UK support: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All product names and vehicle designations are used for fitment reference only. Modifications may affect warranty coverage—consult your vehicle documentation before installation. ```

Victorious Automotive · Range Rover Velar · Interior Trim Carbon Fiber Dashboard Trim for Range Rover Velar 2017–2020 Genuine carbon fiber aesthetic upgrade that elevates your Velar's interior with a premium motorsport finish. Velar 2017-2020 Carbon Fiber Dashboard Trim ABS Material Adhesive Install ISO9001 Certified Overview The Range Rover Velar represents British design at its finest—clean lines, minimalist interiors, and a focus on refinement. This carbon fiber dashboard trim builds on that philosophy by introducing a subtle but unmistakably premium touch to your cabin. Manufactured from high-quality ABS composite with an authentic carbon fiber weave finish, this trim piece measures 20cm in length and fits precisely into the Velar's dashboard topography. It's not about making a loud statement; it's about the discerning driver who appreciates quality details. The material is durable, UV-resistant, and will maintain its appearance through years of use. Installation is straightforward: backed with premium automotive adhesive tape, no drilling or fasteners required. Once in place, it transforms your dashboard from standard to bespoke in seconds—exactly what Velar owners expect. What's Included 📦 Carbon Fiber Dashboard Trim 20cm × 8cm trim piece with carbon weave 🔖 Pre-applied Adhesive Backing Premium automotive-grade tape, ready to install 📋 Installation Guide Simple step-by-step instructions included ✓ ISO9001 Certification Manufactured to international quality standards Product Highlights Authentic carbon fiber weave design—not a printed graphic Lightweight ABS construction—only 40g, zero impact on weight distribution Perfect fit for Velar 2017, 2018, 2019, and 2020 model years UV-resistant finish maintains appearance in direct sunlight Pre-applied automotive adhesive—no additional tape or fasteners needed Measures 20cm × 8cm × 3cm—designed for dashboard contours Removable without damage to original trim (adhesive tape cleans off cleanly) Certified to ISO9001 manufacturing standards Complements both black and light cabin interiors OEM-grade finishing—professional appearance, premium feel Compatibility Model & Year Compatibility Range Rover Velar 2017 Direct Fit Range Rover Velar 2018 Direct Fit Range Rover Velar 2019 Direct Fit Range Rover Velar 2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Sport (All) Not Compatible Range Rover Evoque (All) Not Compatible Installation Difficulty Level: Beginner | Time Required: 5–10 minutes Prepare the surface: Clean your dashboard trim area with a microfiber cloth and isopropyl alcohol. Allow to dry completely. Position the trim: Carefully align the carbon fiber trim piece on your dashboard. Use the existing dashboard lines as a visual guide. Apply pressure: Once positioned, press firmly along the entire length for 10–15 seconds to activate the adhesive bond. Allow cure time: Wait 24 hours before exposing the trim to heat, direct sunlight, or heavy vibration for maximum adhesion strength. Inspect: Check all edges for secure contact. If any edge lifts, gently peel back and reapply pressure. Note: This trim is designed for interior use only. Ensure dashboard surface is clean and free of dust or residue for best adhesion. Do not install in temperatures below 10°C or above 35°C. Ready to Elevate Your Velar's Interior? Premium carbon fiber trim is a signature touch of refinement. Add this to your Velar and experience the difference attention to detail makes. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket supplier. This product is not manufactured, endorsed, or affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover entity. All vehicle names, logos, and model designations are the property of their respective manufacturers and are used for identification purposes only.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Carbon Fibre Window Switch Trims for Range Rover Velar Premium carbon fibre styling for your window controls—the upgrade found on top-spec Velar models. Velar L560 2017–2022 Carbon Fibre Finish 4-Piece Set 2-Minute Install Overview The Range Rover Velar is known for its refined, minimalist interior. These carbon fibre window switch surrounds elevate that aesthetic further—bringing the prestige of top-of-the-line specification to your cabin. Originally fitted only to higher trim levels, this upgrade is now within reach for every Velar owner who demands detail. Our ABS carbon fibre trims are engineered to match OEM fitment precisely. The pre-applied adhesive backing means installation is genuinely straightforward: clean, peel, and press. No tools, no risk, no fuss. Four pieces cover all four door windows, transforming your interior in under two minutes. Quality matters at Victorious. These aren't thin overlays—they're substantial, durable ABS with authentic carbon fibre finish that catches light exactly as it should. Your Velar will feel, and look, one step closer to concours condition. What's Included 📦 4x Window Switch Trims One pair per door, driver & passenger sides ✦ Pre-Applied Adhesive Factory-grade 3M backing—ready to install 📋 Installation Guide Step-by-step instructions included 🛡️ Victorious Guarantee 30-day money-back promise Product Highlights High-quality ABS construction with carbon fibre appearance Precise fitment for Velar 2017–2022 models Pre-applied adhesive backing—no additional tools needed Installation time: under 2 minutes per vehicle Four-piece set covers all door windows Scratch-resistant finish that ages gracefully Non-intrusive, factory-like appearance Same spec as original Range Rover equipment Worldwide shipping via DHL, FedEx, UPS, TNT Backed by Victorious Automotive 30-day guarantee Compatibility Model Years Compatibility Range Rover Velar L560 2017–2022 Direct Fit Range Rover Velar L560 2023 onwards Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Difficulty Level: Easy | Time: 2 Minutes Clean the surface: Use isopropyl alcohol or a clean microfibre cloth to remove any dust, dirt, or residue from the window switch surround areas on all four doors. Dry completely: Allow 2–3 minutes for the adhesive surface to dry fully. Moisture will reduce adhesive strength. Peel and align: Carefully peel the protective backing from the first trim. Align it precisely with the window switch surround, starting at the top edge. Press firmly: Apply steady, even pressure across the entire trim for 10–15 seconds to activate the adhesive bond. Repeat for all four doors: Follow steps 1–4 for the remaining three trims (passenger front, driver rear, passenger rear). Allow to cure: Do not touch or operate windows for 24 hours to allow adhesive to reach full strength. Note: Do not install on wet or dusty surfaces. Humidity should be below 80% for optimal adhesion. If adhesive fails to stick, contact us within 30 days for a replacement set. Ready to Upgrade Your Velar? Transform your interior with genuine carbon fibre detailing. Order your window switch trims today and experience the difference that precision engineering brings to every journey. Shop Velar Upgrades 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent, specialist retailer of aftermarket accessories for Land Rover and Range Rover vehicles. We are not affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any other OEM manufacturer. All product names and trademarks are the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Elevate the rear cabin of your Velar with a precision-cut matte silver TPU trim cover that delivers the SVR aesthetic in minutes — no tools, no fuss. Range Rover Velar 2017–2020 Matte Silver TPU Material Clip-On Fit SVR Look Rear Climate Control Interior Upgrade No Drilling Overview The Range Rover Velar arrived as one of Land Rover's most design-forward models — a cabin defined by clean lines, flush surfaces, and minimalist touches that set it apart from anything else in the segment. But even a vehicle this considered leaves room for the kind of detail that separates a standard specification from something truly special. The rear climate control panel is one of those areas: functional, often overlooked, and entirely worthy of an upgrade. This matte silver rear air conditioning trim is engineered specifically for the Range Rover Velar produced between 2017 and 2020. Precision laser-cut from high-quality TPU (thermoplastic polyurethane), it clips directly over the existing rear climate cover with no adhesives, no cutting, and no permanent modification. The result is a clean, factory-quality finish that immediately draws the eye — exactly the kind of detail you'd find on the flagship SVR models. Forming part of the wider Victorious interior package for the Velar, this trim works beautifully in isolation or as part of a cohesive cabin refresh. Whether you're building out a full interior upgrade or simply refining one detail at a time, this is the kind of piece that quietly elevates the entire space. What's Included 🪟 Rear A/C Trim Cover 1× matte silver TPU clip-on panel 📄 Fitting Guide Step-by-step installation instructions 📦 Protective Packaging Secured for safe international delivery Product Highlights Precision laser-cut for exact fitment on the Velar rear climate panel High-quality TPU construction — flexible, durable, scratch-resistant Matte silver finish replicates the SVR interior aesthetic Clips directly over the existing cover — zero permanent modification No tools, adhesives, or professional installation required Part of the full Victorious Velar interior upgrade package Consistent colour tone across matte silver interior trim collections Maintains full functionality of rear climate controls post-fit Lightweight and precisely formed — no panel gap or flex Reversible install — original cover restored in seconds if needed Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar 2021–2023 All Trims (facelift) Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 2012–2019 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Ensure the rear cabin area is clean and free of dust or moisture before beginning installation. Remove the matte silver trim piece from its protective packaging and orient it correctly against the existing rear climate control panel. Starting from one edge, gently align the trim clip along the outer perimeter of the existing cover, ensuring the cutouts line up with the air vents and control slots. Apply even, gentle pressure across the surface until all clips engage with an audible click — confirming a secure, flush fit. Run a finger lightly around all edges to confirm there are no gaps or lifted sections. Test rear climate controls to verify full function is retained. Note: This trim is designed for the pre-facelift Range Rover Velar (2017–2020 only). Panel dimensions differ on 2021+ models. If you're unsure of your build year, check your VIN plate or contact us before ordering. Complete the Look This rear A/C trim is one part of a full Victorious interior upgrade package for the Range Rover Velar. Explore matching silver trim pieces for the dashboard, door panels, and centre console to achieve a cohesive, factory-grade SVR-inspired finish throughout the cabin. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Upgrade your climate control panel with genuine carbon fibre styling—the SVR look, simplified installation, and premium finish. Velar 2017–2020 Carbon Fibre Climate Control SVR Look Interior Package Overview Your Range Rover Velar deserves an interior that reflects its premium character. This carbon fibre rear air conditioning trim is engineered to elevate the climate control area—a detail that transforms the entire dashboard aesthetic. Built from high-quality carbon TPU with precision laser-cut edges, it delivers the aggressive, purposeful look of SVR models without modification or permanent alteration. Installation takes minutes. The trim simply clips over your existing climate cover, requiring no drilling, adhesives, or professional fitment. Perfect laser alignment ensures a factory-tight finish that integrates seamlessly with your dashboard geometry. Whether you're building a carbon interior package or adding statement detail, this piece combines visual impact with authentic material quality—a hallmark of Victorious Automotive builds. What's Included 🎨 Carbon Fibre Trim Rear A/C panel, precision-cut ✓ Clip-On Fitting No adhesive or drilling needed 📖 Fitting Guide Step-by-step instructions 🛡 30-Day Guarantee Money-back assurance Product Highlights Premium Carbon Fibre TPU Material Laser-Cut for Perfect Fit Clip-Over Installation (No Tools Required) SVR Model Aesthetic Factory-Aligned Edges Non-Permanent Fitment Compatible with 2017–2020 Velar Part of Carbon Interior Packages Durable Protective Coating Worldwide Shipping Available Compatibility Vehicle Year Range Compatibility Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Other Range Rover Models All Years Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Turn off your vehicle and allow the climate control system to cool. Gently locate the existing rear air conditioning trim panel in your climate control area. Position the carbon fibre trim against the original panel, aligning the clip points. Press firmly and evenly until all clips engage and the trim sits flush. Verify that all edges align with adjacent trim panels and dashboard surfaces. Step back and enjoy your new SVR-inspired interior detail. Important: Do not force clips. If resistance is felt, realign the trim and try again. Forcing may damage the clip points. Ready to Elevate Your Velar? This carbon fibre rear air conditioning trim is the detail that transforms a dashboard. Premium material, flawless fit, and the SVR look—all without complexity. Add it to your build today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping — DHL, FedEx, UPS ✓ Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and designs are the property of their respective manufacturers. Product compatibility is based on original equipment specifications; fitment may vary based on vehicle condition and previous modifications.

Victorious Automotive · Range Rover Velar · Interior Styling Pillar Vent Matte Silver Covers for Range Rover Velar 2017–2020 A precision-fitted, tool-free upgrade that transforms the Velar's cabin vent surrounds from understated to genuinely refined — in under two minutes. Range Rover Velar 2017–2020 High-Grade ABS Matte Silver Direct Fit Adhesive Install 2-Piece Set Interior Trim Overview The Range Rover Velar sits at a fascinating intersection — a vehicle designed to be genuinely beautiful, with a cabin that rivals the best of European luxury. Land Rover invested heavily in the Velar's interior architecture, with flush surfaces, minimal controls, and a sense of deliberate restraint. Yet for all its considered design, the standard pillar vent surrounds remain a notably plain detail — an area where the factory finish simply doesn't match the ambition of the rest of the cabin. These Matte Silver Pillar Vent Covers are designed to address exactly that. Produced from high-quality ABS with a consistent matte silver finish, each piece is precision-moulded to sit flush against the Velar's existing vent architecture. The result is a subtle but immediately visible improvement — a finish that reads as more premium, more intentional, and far more cohesive with the Velar's wider interior language. What makes this upgrade genuinely compelling is the combination of visual payoff and minimal commitment. There's no drilling, no cutting, no risk to your interior trim. Pre-applied 3M-grade adhesive tape means the covers bond firmly to the original surface with steady hand pressure — permanently transforming the look of your cabin without any permanent modification. What's Included 🔲 Matte Silver Vent Covers 2-piece set, pre-fitted with adhesive backing 🩹 Pre-Applied Adhesive Tape 3M-grade, factory-applied to each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights High-grade ABS construction for lasting durability Consistent matte silver finish, uniform across both pieces Precision-moulded for exact fitment on Velar pillar vents Pre-applied adhesive — no tools or hardware required Installation time under 2 minutes from unboxing 2-piece set covering both pillar vent positions No drilling, cutting, or irreversible modification Compatible with all trim levels of the 2017–2020 Velar Colour-consistent with popular Velar interior silver accents Elevates the factory interior without altering OEM components Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S Direct Fit Range Rover Velar 2017–2020 SE Direct Fit Range Rover Velar 2017–2020 HSE Direct Fit Range Rover Velar 2017–2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017–2020 First Edition Direct Fit Range Rover Velar 2021 onwards All Not Confirmed Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 / L551 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Before fitting, clean the existing vent surround surface thoroughly with an isopropyl alcohol wipe to remove any dust, grease, or residue. Allow to dry completely. Remove the protective film from the pre-applied adhesive tape on the reverse of each vent cover. Align the first cover carefully over the pillar vent — take a moment to confirm positioning before making contact with the surface. Once aligned, press firmly and evenly across the entire cover for 20–30 seconds to ensure a strong initial bond. Repeat for the second piece on the opposing vent position. Allow 24 hours for the adhesive to fully cure before exposing to direct sunlight or extreme temperatures. Note: Ensure the application surface is completely clean and dry before fitting. Attempting to install over dust, wax, or moisture will significantly reduce adhesive performance. Do not attempt to reposition covers once the adhesive has made contact with the surface. Complete Your Velar's Interior Browse our full Range Rover Velar collection for more precision-fit interior and exterior upgrades, hand-picked by our specialist team for owners who hold their vehicles to a higher standard. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Dashboard Side Trim for Range Rover Velar 2017–2020 Transform your Velar's interior with premium carbon fibre dashboard accents. Direct-fit, glue-on installation in under two minutes. Velar L560 2017–2020 Carbon Fibre ABS 2-Piece Set Pre-Applied Adhesive Overview The Range Rover Velar's dashboard vent surrounds come factory with a satin-finish plastic trim that blends into the interior. For owners seeking a more refined aesthetic, these carbon fibre replacements deliver an instant upgrade in visual presence without modification or permanent alteration. Machined from high-quality ABS polymer with authentic carbon fibre finish, this two-piece trim set installs directly over the existing dashboard vents using pre-applied adhesive tape. No tools required. No drilling. No dashboard removal. The weave detail and deep black tone create genuine visual depth, complementing both standard and HSE interior packages. Perfect as a standalone upgrade or paired with our full carbon fibre cabin suite. What's Included 📦 2x Dashboard Trim Pieces Left and right vent surrounds, pre-fitted 🧴 Pre-Applied Adhesive Tape 3M automotive-grade mounting tape 📋 Installation Guide Visual step-by-step with measurements 🛡️ 30-Day Money-Back Guarantee Victorious peace of mind protection Product Highlights Authentic carbon fibre finish with visible weave detail Premium ABS polymer construction — lightweight and rigid Two-piece set covers both dashboard vent surrounds Installation in under 2 minutes with pre-applied 3M tape No tools, drilling, or permanent modification required Factory-aligned fitment — no gaps or overhang Heat-resistant and UV-stable for long-term durability Compatible with all interior trim colours and packages Complements OEM carbon fibre and gloss black cabin trims Covered by Victorious 30-day returns guarantee Compatibility Vehicle Model Year Range Compatibility Range Rover Velar L560 2017–2020 Direct Fit Range Rover Velar L560 2020–2024 Not Compatible Range Rover Sport L494 2014–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes Difficulty Level: Beginner | Time: 2 Minutes Locate the two dashboard vent surrounds on either side of the steering wheel and central infotainment screen. Clean both surfaces with the provided alcohol wipe. Allow to dry completely (approximately 30 seconds). Carefully peel back the protective backing from the adhesive tape on the first trim piece. Align the piece with the vent surround opening, starting at the top corner. Press down firmly across the entire surface for 10 seconds. Repeat for the second piece on the opposite side of the dashboard. Allow adhesive to set for 24 hours before touching or adjusting (optional but recommended for maximum bond strength). Important: Do not apply the trim pieces in ambient temperatures below 10°C or above 35°C. Ensure all surfaces are free of dust, fingerprints, and moisture before installation. Ready to Refine Your Velar? Add authentic carbon fibre character to your dashboard in under two minutes. No cutting, no drilling, no permanent changes. Just premium interior detailing that makes a lasting impression. Shop Velar Upgrades Use code 22GET20 for 20% off when you order 2 or more items. ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or the Jaguar Land Rover group of companies. All vehicle names and model designations remain the property of their respective manufacturers. Product specifications and compatibility are subject to change without notice.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Dashboard Trim for Range Rover Velar 2017–2020 A single, precision-fitted piece that transforms the Velar's centre dashboard with a refined matte silver finish — installed in under two minutes, no tools required. Range Rover Velar 2017–2020 Matte Silver ABS Plastic Dashboard Trim Adhesive Fit Interior Upgrade No Drilling Overview The Range Rover Velar was designed to sit between practicality and pure luxury — a vehicle that rewards those who pay attention to detail. From the flush door handles to the all-digital Touch Pro Duo interface, every element of the Velar's interior was conceived with intent. Yet the factory dashboard trim, for all its refinement, finishes in a flat, unremarkable tone that leaves something to be desired for owners who truly know what this cabin is capable of. This Matte Silver Dashboard Trim is purpose-built to slot directly over the existing Velar centre dashboard surround, delivering an immediate visual uplift without any permanent modification. The matte silver tone is understated and considered — it complements the Velar's interior palette rather than competing with it, adding contrast, depth, and a sense of bespoke craftsmanship that the standard trim simply doesn't offer. Manufactured from high-quality ABS plastic and pre-fitted with automotive-grade adhesive tape on the reverse, this piece requires no drilling, no wiring, and no professional fitting. If you can clean a surface and apply pressure, you can complete this upgrade in under two minutes. For Velar owners who take pride in their interior presentation, this is one of the most efficient upgrades available. What's Included 🪟 Dashboard Trim Cover 1 piece — matte silver ABS, pre-cut to Velar fitment 🔲 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape — factory-applied to reverse 📄 Fitment Guide Simple step-by-step installation reference included Product Highlights High-quality ABS plastic construction — durable and lightweight Matte silver finish — refined, non-reflective, OEM-style tone Precision-cut to factory Velar dashboard dimensions Pre-applied automotive adhesive tape on reverse face Tool-free installation — no drilling, no clips, no mess Installation completed in under 2 minutes Fully reversible — leaves no damage on removal Single piece (1pcs) — clean, seamless coverage Compatible with all trim levels of the 2017–2020 Velar Designed and tested specifically for Range Rover Velar interiors Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S / SE / HSE / R-Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Not Confirmed Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Land Rover Discovery 5 2017–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Ensure the existing dashboard trim surface is clean, dry, and free from dust or grease. Use an isopropyl alcohol wipe if available for best adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse of the trim piece. Align the matte silver trim cover carefully with the existing dashboard surround — take a moment to confirm positioning before pressing. Apply firm, even pressure across the full surface of the piece for 30–60 seconds to activate the adhesive bond. Allow 30 minutes at room temperature before exposing to extreme heat or cold for a fully secure set. ⚠ Note: Do not attempt installation immediately after the vehicle has been in direct sunlight or extreme cold. Surface temperature affects adhesive performance. Allow the interior to reach a stable ambient temperature before fitting. Upgrade Your Velar Interior Today The Velar deserves an interior that matches its exterior ambition. This matte silver dashboard trim is one of the simplest, most impactful upgrades you can make — and it takes less time to fit than it does to make a coffee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Support: Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Hand Brake Cover for Range Rover Velar 2017–2020 Upgrade your parking brake surround to premium carbon TPU with SVR-spec aesthetics and clip-on installation. L560 Platform 2017–2020 Carbon TPU Clip-On SVR Look Overview The Range Rover Velar L560 is celebrated for its minimalist, driver-focused interior and precision engineering. Subtle details matter tremendously on a vehicle this refined, which is why the hand brake surround deserves the same calibre of finish as the rest of your cabin. This carbon fibre hand brake cover transforms the standard climate control surround into a striking focal point. Precision-laser-cut to integrate seamlessly with your Velar's existing geometry, it clips directly over the factory piece without adhesives, fasteners, or modification. The result is a premium, integrated appearance that echoes the bold aesthetic found on SVR performance models. Manufactured from high-quality carbon TPU—a composite material that combines authentic carbon fibre weave with durable thermoplastic backing—this cover resists fingerprints, UV damage, and daily wear while maintaining a lustrous, professional finish. Installation takes minutes and requires no special tools or technical knowledge. What's Included 🎯 Carbon TPU Cover Precision-cut hand brake surround 📋 Installation Guide Step-by-step with images ✓ Fit Guarantee Perfect alignment or money back Key Features Authentic carbon fibre weave with TPU backing Laser-cut for precise factory-fit alignment Clip-on design—no adhesive, glue, or screws Resistant to fingerprints and UV fading SVR-inspired aesthetic for stock Velar cabins Durable thermoplastic composite material Reversible installation if needed Complements all interior trim packages Professional finish in under 5 minutes Part of Victorious Carbon Interior Packages Compatibility Model & Year Engine Compatibility Range Rover Velar P250 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P300 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P400 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar D240 (2017–2020) 2.0L Diesel Direct Fit Range Rover Velar D300 (2017–2020) 3.0L Diesel Direct Fit Range Rover Velar SVR (2017–2020) 5.0L Supercharged Direct Fit Range Rover Velar 2021–Present All Engines Not Compatible Installation Guide Prepare: Ensure the hand brake surround and surrounding trim are clean and dry. No pre-treatment needed. Inspect Fit: Carefully position the carbon cover over the factory climate surround. Align clip points on all edges. Clip Engagement: Press firmly and evenly around all four sides until clips engage fully. You'll hear or feel a soft click. Verify Security: Gently pull on the cover to confirm it's firmly seated. Check that all edges are flush with surrounding trim. Final Check: Operate your hand brake lever to ensure full clearance and smooth motion. Adjust if necessary. Note: If your Velar has bespoke interior trim or non-standard dash finishes, test-fit the cover before finalising installation. The cover is reversible and will not damage factory components. Ready to Upgrade Your Velar? Transform your cabin with SVR-spec carbon fibre detailing. This hand brake cover is part of our comprehensive Carbon Interior Packages—designed to elevate every surface that matters. Shop Range Rover Velar Parts Save 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 – 12,300+ Reviews ✓ 30-Day Money Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS 📞 Expert Support Mon–Fri 9am–7pm GMT Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Installation of aftermarket parts may void manufacturer warranty in some cases—please verify with your Land Rover dealer before proceeding.