Range Rover Sport L494 MY13-20 Accessories

Victorious Automotive · Range Rover Sport L494 · Exterior Body Conversion Range Rover Sport SVR Body Conversion Kit — 2013–2018 Facelift Upgrade (L494) Give your pre-facelift Range Rover Sport L494 a complete 2018 SVR-inspired exterior transformation — from the front bumper to the rear lights — in bare plastic ready for your choice of finish. L494 2013–2018 SVR Style Bare Plastic Facelift Conversion Full Body Kit Front & Rear Fenders Included Sport Exterior Overview The Range Rover Sport L494 arrived in 2013 as one of the most dynamic and desirable SUVs on the road — refined, purposeful, and unmistakably Sport. When Land Rover refreshed the model in 2018 with an updated front and rear aesthetic, sharper lighting signatures, and revised body detailing, the visual gap between earlier and later examples became immediately apparent. For owners of 2013–2017 models, that gap no longer needs to exist. This SVR-style body conversion kit is engineered specifically for the pre-facelift Range Rover Sport L494, delivering a comprehensive update to every major exterior panel that defines the 2018 appearance. From the restyled SVR-influenced front bumper and updated grille to the revised rear bumper and 2018-spec lighting front and rear, this kit replaces the original old-style components with modern, cohesive alternatives that genuinely transform how the vehicle reads on the road. Supplied in bare plastic throughout, each component arrives ready for professional preparation, priming, and painting to your exact specification — whether you're matching an existing factory colour or creating something entirely bespoke. This is a high-commitment, high-reward upgrade for Sport owners who want their vehicle to look exactly as current as it feels to drive. What's Included 🔆 Front Lights — 2018 Style Updated LED-style units matching 2018 facelift signature 🔴 Rear Lights — 2018 Style Revised rear light cluster design for a cohesive facelift look 🚘 Front Bumper — 2018 Style SVR-influenced lower section and air intake styling 🔁 Rear Bumper — 2018 Style Updated rear diffuser-style bumper for a Sport facelift finish 🛡️ Front Fenders / Wings (L & R) Left and right updated fender panels for seamless panel fit ⬛ Black Grille — 2018 Style Dark finish SVR-inspired front grille surround 💨 Side Vents — 2018 Style Updated side vent inserts for both sides of the vehicle 🔩 Hood / Bonnet Vents — 2018 Style Revised bonnet vent inserts for the complete facelift look Product Highlights Complete exterior transformation from 2013–2017 spec to 2018 facelift appearance SVR-inspired styling throughout — front bumper, grille, vents, and rear Supplied in bare plastic — ready for professional painting to any colour Includes both front and rear bumpers for a fully cohesive conversion Front and rear 2018-style lights included — no need for separate purchases Left and right fenders/wings included for a seamless panel line continuation 2018 black grille surround adds depth and a modern, aggressive character Side vents and bonnet vents complete the full-body visual refresh Designed for models equipped with old-style (pre-facelift) headlights Engineered to L494 specification for accurate panel fitment and alignment Compatibility Vehicle Model Code Year Range Headlight Type Fitment Range Rover Sport L494 2013–2017 Old-style (pre-facelift) Direct Fit Range Rover Sport L494 2018 Facelift headlights Not Required Range Rover Sport L461 2022–2026 New generation Not Compatible Range Rover Vogue L405 2013–2020 Various Not Compatible Defender L663 2020–2026 N/A Not Compatible Installation Notes Difficulty: Advanced  ·  Estimated Time: 1–2 Full Days (Professional) Before fitment, dry-fit all components against the vehicle to confirm panel alignment and identify any preparation requirements. Have all bare plastic components professionally prepared, primed, and painted to your specification prior to installation — this will prevent colour mismatch after fitting. Disconnect the vehicle battery before removing or connecting any lighting components (front and rear lights). Remove the original front bumper, grille, side vents, bonnet vents, and front fenders carefully — retain all original hardware and mounting clips where possible. Remove the original rear bumper and rear light clusters, ensuring all wiring looms are safely disconnected and protected. Install the 2018-style front bumper, grille insert, fenders, and bonnet vents — align to factory mounting points and torque all fixings to manufacturer specification. Install the 2018-style rear bumper and connect the updated rear light clusters, ensuring secure wiring connections throughout. Fit the side vents to both sides and perform a full panel gap inspection before reconnecting the battery and verifying all lighting functions. ⚠ Important: This is a complex multi-panel body conversion. Professional installation by a qualified bodywork specialist is strongly recommended. Incorrect fitment may affect panel alignment, water ingress sealing, and lighting compliance. Always confirm legal road compliance requirements for lighting in your region before use. The Sport, Exactly As It Should Look The Range Rover Sport L494 deserves to wear the sharpest version of itself. This conversion kit is how you get there — every panel, every light, every vent replaced with the 2018 facelift design you've been looking at. Browse the full Range Rover Sport L494 collection for further exterior and interior upgrades. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always consult a qualified professional before undertaking bodywork modifications and verify road legality requirements in your jurisdiction.

Victorious Automotive · Range Rover Sport L494 · Exterior Body Range Rover Sport 2018 Real Carbon Fibre Hood Bonnet – L494 A full replacement carbon fibre bonnet engineered for the 2018 Range Rover Sport L494, delivering significant weight reduction and a race-inspired aesthetic with genuine 2×2 twill weave carbon construction. L494 2018 Real Carbon Fibre 2×2 Twill Weave Weight Reduction Direct Fit Exterior Body Sport Overview The Range Rover Sport L494 is already one of the most commanding performance SUVs on the road — a machine that balances sharp dynamic ability with everyday luxury. The 2018 model year in particular sits at a sweet spot in the L494 generation, benefiting from the revised Ingenium powertrains and updated driver assistance systems that make it as refined as it is capable. For owners who want to push the Sport's aesthetic further, the bonnet is one of the most visually impactful panels on the entire vehicle. This full replacement carbon fibre bonnet is constructed from genuine, high-grade real carbon fibre — not a carbon-look wrap or ABS plastic overlay. Laid up in a classic 2×2 twill weave and finished with a UV-resistant clear lacquer, the panel showcases the raw beauty of the material while offering measurable weight savings over the factory steel bonnet. The result is a cleaner front end, reduced unsprung mass, and a profile that reads as purposeful rather than theatrical. Designed as a direct-fit replacement for the Range Rover Sport L494, the bonnet retains all OEM mounting points, hinge attachment locations, and bonnet catch geometry. No cutting, fabrication, or professional body shop intervention is required beyond careful fitment and minor gap adjustment — something any competent enthusiast or trusted independent workshop can manage in an afternoon. What's Included 🪄 Carbon Fibre Bonnet Full replacement panel, real 2×2 twill weave carbon 🔩 OEM-Position Mounting Hardware Pre-fitted mounting inserts aligned to factory hinge points 📦 Protective Packaging Heavy-duty foam and wrap to protect the panel in transit 📋 Fitment Guide Step-by-step installation reference included Product Highlights Genuine real carbon fibre construction — no plastic imitations Classic 2×2 twill weave pattern with high visual clarity UV-resistant clear lacquer coat for long-term gloss retention Significant weight saving over factory steel bonnet Direct-fit replacement — all OEM mounting points retained Compatible with factory bonnet hinges and bonnet catch mechanism Precision moulded for accurate panel gap alignment Suitable for both road use and track/show preparation Designed exclusively for 2018 Range Rover Sport L494 Worldwide shipping available via DHL, FedEx, UPS, TNT Compatibility Model Code Year Range Compatibility Range Rover Sport L494 2018 Direct Fit Range Rover Sport L494 2014–2017 Verify First Range Rover Sport L494 2019–2021 Verify First Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Yes Open and support the existing factory bonnet safely using the bonnet stay. Disconnect any washer jet hoses or wiring loom clips attached to the underside of the OEM bonnet. With an assistant, support the bonnet and remove the factory hinge bolts (typically 4 bolts per side). Carefully lift the OEM bonnet clear of the vehicle and set aside. Dry-fit the carbon fibre bonnet to the hinge points. Do not fully tighten at this stage — allow for adjustment. Check panel gaps at the front edge, wings, and scuttle panel. Once satisfactory alignment is achieved, torque the hinge bolts to factory specification. Reconnect all washer jet hoses and wiring clips if applicable to your variant. Adjust the bonnet bump stops and bonnet catch striker plate as needed to achieve flush, even closure. Test the bonnet latch mechanism multiple times before driving. Inspect the lacquer finish for any transit marks and treat with a suitable automotive detailing spray before first use. ⚠ Please Note: Panel gaps on carbon replacement bonnets may require minor adjustment depending on individual vehicle tolerances. We recommend having the fitment checked by a professional body shop if you are unfamiliar with panel alignment. Do not drive the vehicle with an unsecured bonnet under any circumstances. If your vehicle features active bonnet (pedestrian protection) systems, consult your workshop prior to installation. Upgrade Your Range Rover Sport Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium quality accessories. Worldwide shipping, 30-day money-back guarantee, and a team of enthusiasts ready to help. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS, TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle codes referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fibre Roof Light Pod with LED Lights — Range Rover Sport L494 (2014–2021) A handcrafted real carbon fibre roof pod with super-bright integrated LED lighting — engineered for a clean, non-destructive install that preserves every original switch and gauge on your Sport. Range Rover Sport L494 2014–2021 Real Carbon Fibre LED Roof Pod Wireless Remote Non-Destructive Fit Fuse Box Powered Aerodynamic Design Handcrafted Overview The Range Rover Sport L494 is a vehicle built around presence — commanding on the road, refined within the cabin, and unmistakable from any angle. For owners who want to push that presence further without compromising the factory aesthetic, the roof line remains one of the most underutilised styling opportunities on the platform. This carbon fibre roof light pod changes that entirely. Crafted from genuine woven carbon fibre and finished with a precision gloss coat, this roof pod is designed specifically for the Range Rover Sport 2014–2021. Its aerodynamic profile sits flush and purposeful on the roofline — reminiscent of the kind of accessory you'd expect to see on a factory SVR special edition. Integrated high-spec LED lights deliver a super-bright, even output that draws eyes day or night, whether parked on the street or moving through traffic. What separates this pod from lesser alternatives is the installation philosophy. There's no drilling, no permanent modification, and no interference with the Sport's OBD, infotainment, or switch panel. Power draws cleanly from the fuse box, and the lights are operated via a wireless remote control — leaving your factory switches, gauges, and interior trim completely untouched. It's a modification that looks like it was always meant to be there. What's Included 🪨 Carbon Fibre Roof Pod Handcrafted real carbon fibre shell with gloss finish 💡 Integrated LED Light Bar High-spec super-bright LEDs pre-fitted to pod housing 📡 Wireless Remote Control Operates the LED lights independently of factory switches 🔌 Wiring Loom Pre-terminated for direct fuse box connection — no error codes 🧲 Automotive 3M Mounting Tape Heavy-duty adhesive for secure non-destructive roof fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine woven carbon fibre construction — not plastic wrap or vinyl Precision gloss coat finish that complements factory bodywork Super-bright high-spec LED lights integrated into pod housing Wireless remote operation — zero factory switch interference Fuse box powered — clean, direct draw with no dashboard errors Non-destructive installation — no drilling, no permanent modifications Aerodynamic low-profile form designed for Sport L494 roofline Handcrafted one at a time — individually finished to high standard Fits all L494 Sport variants across the full 2014–2021 model run Retains 100% factory interior and exterior OEM appearance Compatibility Vehicle Code Years Fit Range Rover Sport SE L494 2014–2021 Direct Fit Range Rover Sport HSE L494 2014–2021 Direct Fit Range Rover Sport HSE Dynamic L494 2014–2021 Direct Fit Range Rover Sport SVR L494 2014–2021 Direct Fit Range Rover Sport Autobiography L494 2014–2021 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 1–3 Hours Thoroughly clean the roof mounting area using an isopropyl alcohol wipe to ensure the surface is completely free of wax, grease, or dirt residue. Dry-fit the roof pod to confirm positioning and alignment before committing to the adhesive — mark reference points lightly with masking tape if needed. Apply the included automotive 3M double-sided tape to the underside of the pod, then press firmly into position on the roof and hold for 60 seconds. Route the wiring loom discreetly through the roof seal and into the cabin — this typically follows the A-pillar trim channel without requiring permanent trim removal. Connect the wiring loom to an appropriate fuse in the fuse box — refer to your vehicle's fuse diagram for a suitable auxiliary circuit. Pair the wireless remote receiver to the LED system following the instructions included in the guide. Test the LED function across all modes using the remote before refitting any trim panels you may have temporarily displaced. ⚠ Please Note: The roof pod itself can be mounted by most owners with basic DIY confidence. However, the electrical wiring requires competence with automotive electrics. If you are unsure, we recommend having the wiring completed by a qualified auto-electrician. Installation is the responsibility of the customer. This product is handmade from real carbon fibre — minor surface variations are a natural characteristic of the material and not considered defects. Upgrade Your Range Rover Sport Today Shop the full Range Rover Sport L494 collection at Victorious Automotive — premium accessories for owners who refuse to settle for standard. Shop Range Rover Sport L494 Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used for fitment reference purposes only.

Victorious Automotive · Range Rover · Deployable Side Steps Deployable Electric Side Steps for Range Rover Vogue, Sport, Velar & Evoque — 2013 to 2021 Motorised aluminium running boards that automatically deploy on door open and retract flush to the sill — combining effortless entry with a cleaner, more aggressive stance. L405 · L494 · Velar · L538 / L551 2013–2021 Aluminium Alloy Auto-Deploy 800 kg Load Rated ISO9001 Certified Direct Fit Part: Star War-008 Overview The Range Rover family — from the full-size Vogue L405 to the Sport L494, Velar, and Evoque — sits high on purpose. That ride height is part of what makes these vehicles so commanding on road and off, but it can make daily boarding less than graceful for passengers. Factory side steps were never offered across most of these generations, and static aftermarket boards compromise the clean sill lines that define these designs. These deployable electric side steps solve both problems. Triggered by the door latch signal, they extend automatically when any door opens and retract tight to the undercarriage the moment the door closes — completely hidden from view when not in use. The result is a step that appears exactly when it's needed and disappears entirely when it isn't, maintaining the original profile of the vehicle without compromise. Built from extruded aluminium alloy with anti-corrosion stainless steel plating and a non-slip tread surface, these steps are engineered to the same durability standards expected of the vehicles they serve. With an 800 kg load rating, a robust motor assembly, and certification to ISO9001 and TS16949, this is not an accessory built to the lowest acceptable specification — it's one built to last the life of the vehicle. What's Included ⚙️ Motor Assembly Dual motor unit with deploy/retract mechanism 🪜 Side Step Boards (Pair) Anti-slip aluminium tread surface, left & right 🔩 Metal Support Brackets Heavy-gauge mounting arms for rigid fitment 🔌 Electric Wiring Loom Pre-terminated harness for door trigger integration 🛠️ Fixings & Accessories All hardware required for complete installation Product Highlights Auto-deploy triggered by door open signal — no switches or manual effort required Retracts flush to the underside of the sill when doors are closed, preserving the vehicle's stance Extruded aluminium alloy construction — lightweight yet rigid under load Anti-corrosion stainless steel plating for long-term protection against road salt and moisture Rated to 800 kg static load — comfortably supports occupants of any size Anti-vibration design prevents rattles during driving over rough terrain Non-slip tread surface provides secure footing in wet or muddy conditions Soft-deploy motor reduces mechanical noise and extends component life Custom-designed brackets for each specific vehicle model — no cutting or fabrication required ISO9001 & TS16949 certified — manufactured to automotive-grade quality standards Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2021 Direct Fit Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L551 2019–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not This Listing Range Rover Sport L461 2022–2026 Not This Listing Defender L663 2020–2026 Not Compatible Specifications Specification Detail Material Aluminium Alloy + Stainless Steel + ABS Part Number Star War – 008 Position Both sides of vehicle (pair) Unit Weight 26–28 kg (full set) Load Rating 800 kg Fitment Type Custom bracket, vehicle-specific direct fit Certification ISO9001 & TS16949 Trigger Method Door open / close electrical signal Installation Notes Difficulty: Intermediate  ·  Estimated Time: 3–5 Hours  ·  Two People Recommended Safely raise and support the vehicle on axle stands. Do not work under a vehicle supported only by a jack. Remove any existing sill trim or protective covers to expose the mounting points beneath the door sills. Trial-fit the metal support brackets to confirm alignment with factory mounting locations before final torquing. Mount the motor assembly to the bracket arms, ensuring the step board travel path is clear of obstructions. Route the wiring loom through the vehicle's undercarriage, keeping it clear of exhaust and moving components. Secure with supplied cable ties. Connect the wiring loom to the door trigger signal — typically tapped from the door latch switch or interior light circuit. Consult wiring diagrams for your specific model year. Power on the vehicle and test deploy/retract cycles through all doors before lowering the vehicle. Refit sill trim and conduct a final visual inspection for clearance and secure fitment. ⚠ Note: Professional installation by a qualified automotive electrician or 4x4 specialist is strongly recommended. Incorrect wiring connections may trigger fault codes or affect door module functionality. Always disconnect the battery negative terminal before working on electrical circuits. Upgrade Your Range Rover — The Right Way At Victorious Automotive, every product we stock is selected specifically for Land Rover and Range Rover owners who refuse to compromise. These deployable steps are one of the most functional upgrades you can make — and one of the most satisfying to live with every day. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle build before purchasing.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Range Rover Sport (2014–2017) High Gloss Black Interior Trim Set — 8 Pieces A precision-engineered 8-piece ABS interior trim upgrade that delivers a polished, high gloss black finish tailored specifically for the Range Rover Sport L494 facelift generation. Range Rover Sport L494 2014–2017 High Gloss Black ABS Plastic 8-Piece Set Direct Fit Interior Trim No Drilling Required Overview The Range Rover Sport L494, produced between 2014 and 2017, carries a commanding presence both inside and out. Its interior was already a step forward from its predecessor — but for owners who want to push that aesthetic further, the factory trim finish can feel understated. This high gloss black interior trim set is built specifically for that generation, restoring a sense of sharpness and modernity to the cabin without the cost or complexity of an OEM upgrade. Crafted from high-grade ABS plastic, each of the eight pieces is individually moulded to mirror the geometry of your Sport's original trim panels. The deep, mirror-like gloss black finish reflects light cleanly and integrates seamlessly with both lighter and darker interior colour schemes — whether your Sport is finished in Ebony, Ivory, or any of Land Rover's other interior palettes from that era. Unlike generic trim kits, this set is designed with the L494 Sport's specific dash, door and console architecture in mind. Fitment is achieved via pre-applied adhesive backing, removing the need for any drilling, cutting or professional bodywork — making this one of the highest-impact, lowest-effort interior upgrades available for this generation of Sport. What's Included 🎛️ Dashboard Trim Piece Central fascia accent panel 🚗 Centre Console Trim Gloss surround for gear selector area 🚪 Door Panel Trim × 2 Driver and passenger side accents 🎚️ Air Vent Surround Trim Gloss accent ring for centre vents 🖐️ Armrest Trim Piece Centre console armrest accent 🔳 Infotainment Surround Screen bezel accent panel ⚙️ Gear Selector Trim Rotary gear selector surround 📦 Protective Packaging Each piece individually wrapped for safe transit Product Highlights 100% brand new — never fitted, zero compromise on finish quality Deep mirror-like high gloss black surface finish throughout Precision-moulded ABS plastic for exact L494 panel geometry Pre-applied 3M-grade adhesive backing for clean, tool-free installation Full 8-piece set covering key interior focal points in one purchase No drilling, cutting or modification required to your existing trim Reversible installation — original trim remains fully intact beneath Resistant to everyday wear, UV exposure and interior temperature fluctuation Compatible with all trim and interior colour variants of the 2014–2017 Sport Arrives individually packaged to prevent transit damage to the gloss surface Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (pre-facelift) Not Compatible Range Rover Sport L494 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a different generation of Range Rover Sport, browse our full Range Rover Sport L494 collection or our new Range Rover Sport L461 collection for compatible alternatives. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 30–60 Minutes  ·  🛠 Tools Required: None Thoroughly clean each target interior panel with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesive bond strength. Dry-fit each trim piece against its corresponding panel before committing, confirming alignment and coverage against the existing trim geometry. Starting from the centre of the cabin, peel the protective backing from the adhesive layer and position carefully — trim pieces are not repositionable once contact is made. Apply firm, even pressure across the entire surface of each piece for 30–60 seconds to activate the adhesive bond fully. Work outward from the centre console toward the door panels, completing one piece at a time to maintain consistency. Allow a minimum of 12 hours before exposing the freshly installed trim to heat sources or direct sunlight — this allows the adhesive to fully cure. ⚠ Note: Ensure all panels are free of dust, grease and moisture prior to installation. Applying trim to a warm surface (e.g. a cabin warmed by sunlight) can slightly improve adhesion in cooler climates. If you are unsure about any step, professional installation is always recommended for the best long-term result. Upgrade Your Sport's Interior Today Trusted by over 12,300 Range Rover and Land Rover owners worldwide, Victorious Automotive delivers precision-engineered accessories backed by a 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS and TNT. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are the property of their respective owners and are used for fitment reference purposes only.

Victorious Automotive · Range Rover Sport L494 · Running Boards & Side Steps Fixed Side Steps & Running Boards — Range Rover Sport L494 (2013–2022) Permanently mounted, structural-grade aluminium and ABS side steps engineered for a direct, bolt-on fit to the Range Rover Sport L494 — enhancing entry, stance, and exterior presence in a single upgrade. Range Rover Sport L494 2013–2022 Fixed Mount Aluminium + ABS 220 lbs Load Rating Direct Bolt-On No Drilling Required Pair Included Sport Exterior Overview The Range Rover Sport L494 sits at a commanding ride height — a deliberate design choice that defines its road presence and off-road capability. But that same height can make entry and exit less gracious for passengers and cargo alike. These fixed side steps address that directly, providing a stable, permanent boarding platform that integrates cleanly with the Sport's lower body architecture without compromising its aggressive silhouette. Constructed from a combination of high-quality aluminium and durable ABS plastic, these running boards are built to withstand the demands of daily use as well as more challenging conditions. The fixed design means there are no moving parts, no electronic systems to fail, and no reliance on vehicle power — just solid, dependable footing every time you open the door. Each board is rated to support up to 220 lbs (100 kg), giving you genuine confidence whether you're stepping up in a car park or loading gear on a trail. The fit is specific to the L494 chassis — not a universal bracket solution, but a dedicated mount geometry that mirrors the Sport's factory sill line. The result is a step that looks like it belongs, not like an afterthought. Installation uses existing vehicle fixing points and requires no cutting or drilling into your bodywork, making this a clean, reversible upgrade that can be completed at home with basic tools. What's Included 🪜 Step Boards × 2 Left and right matched pair, pre-finished 🔩 Mounting Brackets Vehicle-specific bracket set included 🔧 Bolts & Screws Full hardware kit, no separate purchases needed 📋 Installation Guide Step-by-step instruction sheet included Product Highlights Direct bolt-on fitment for Range Rover Sport L494 — no cutting or drilling required High-quality aluminium construction with ABS plastic cladding for a refined finish Fixed design with no moving parts — zero maintenance and zero failure points Rated to 220 lbs (100 kg) per board — confident load bearing for all passengers Matched left and right pair included as standard — complete kit out of the box Anti-slip step surface for safe boarding in wet or muddy conditions Low-profile integration follows the Sport's factory sill line for an OEM-style look Full hardware and mounting bracket set included — nothing extra to source Compatible with all L494 body variants across the 2013–2022 production run Reversible installation — original fixing points preserved if removed Compatibility Vehicle Code Years Fit Range Rover Sport HSE L494 2013–2022 Direct Fit Range Rover Sport SVR L494 2015–2022 Direct Fit Range Rover Sport SE L494 2013–2022 Direct Fit Range Rover Sport Dynamic L494 2013–2022 Direct Fit Range Rover Sport Autobiography L494 2013–2022 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic hand tools Park the vehicle on a level surface and ensure the sill area is clean and free from mud or debris before beginning. Locate the factory mounting points along the underside of the vehicle sill on both the driver and passenger sides — no new holes are required. Attach the supplied mounting brackets to the factory fixing points using the provided bolts, ensuring each bracket is flush and torqued to specification. With a second person assisting, align each step board onto the mounted brackets, checking that the step surface is level and the leading/trailing edges are symmetrical. Secure the step boards to the brackets using the remaining hardware from the kit. Do not fully tighten until both boards are positioned and visually confirmed to be even. Perform a final torque pass on all fixing points, then check each board by applying body weight gradually to confirm stability before use. Note: Professional installation is recommended if you are unfamiliar with under-vehicle work. Ensure all bolts are correctly torqued — undertightened fixings can cause movement or noise during driving. Do not exceed the 220 lb (100 kg) per-board load rating. Engineered for the Sport. Built for Owners Who Know the Difference. Every part stocked at Victorious Automotive is selected for fit, finish, and longevity — because Range Rover Sport owners deserve accessories that match the standard of the vehicle itself. Browse the full L494 collection and build the Sport you've always intended. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Rear Tailgate Lip Spoiler for Range Rover Sport (2014–2020) Premium carbon fiber tailgate enhancement designed to elevate your Sport's rear profile with authentic styling and lasting durability. L494 2014–2020 Carbon Fiber Tailgate Lip Weather-Resistant Direct Fit Overview The Range Rover Sport L494 (2014–2020) commands presence on any road. This Carbon Fiber Rear Tailgate Lip Spoiler refines that authority by adding contemporary styling to the vehicle's rear fascia—a subtle but unmistakable upgrade that separates thoughtfully equipped Sports from standard builds. Machined from genuine carbon fiber, this lip transforms the tailgate's lower edge with clean lines and a contemporary aesthetic. The material's inherent lightweight properties—combined with superior weather resistance—mean this piece endures seasons of UK weather, UV exposure, and daily use without degradation or fading. Installation is straightforward for most owners, though professional fitting ensures the perfect gap and alignment. Once fitted, you'll notice the visual impact immediately: a more sculpted rear, sharper lines, and a finish that signals the level of care you invest in your Sport. What's Included 🎯 Carbon Fiber Lip Single-piece tailgate spoiler, precision-fitted for L494 ⚙️ Mounting Hardware Stainless fasteners and adhesive strips included 📋 Installation Guide Step-by-step instructions with torque specs 🛡️ 30-Day Guarantee Full refund if you're not completely satisfied Product Highlights Genuine carbon fiber construction—lightweight yet rigid Precision-engineered fit for 2014–2020 L494 models Weather-resistant finish withstands rain, salt, and UV Professional-grade adhesive and stainless steel hardware Clean, modern profile enhances rear visual depth Enhanced aerodynamic geometry aids downforce No drilling required—adhesive or bolt-on installation Maintains OEM paint compatibility and panel gaps Backed by our 30-day money-back guarantee Proudly stocked by Victorious Automotive since 2019 Compatibility Model & Year Generation Status Range Rover Sport 2014–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 Not Compatible Range Rover Sport 2010–2013 L320 Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Check your VIN or chassis plate before ordering. We're here to confirm compatibility: +44 203 943 9919, Mon–Fri 9am–7pm. Installation Difficulty: Moderate | Time: 45–90 minutes Prepare the surface: Clean the tailgate's lower edge thoroughly with isopropyl alcohol. Let dry completely (10 minutes). Test fit: Position the lip without adhesive to verify alignment with the tailgate and body line. Mark any final adjustments. Apply adhesive: Using the supplied heavy-duty automotive tape or adhesive beads, apply to the rear mounting surface of the lip. Secure fasteners: If using bolt-on method, drill pilot holes and install stainless steel fasteners hand-tight, then torque to 8 Nm. Press and hold: Press the lip firmly onto the tailgate for 60 seconds to ensure full adhesive contact. Cure time: Allow 24 hours before exposing to water or vehicle movement for maximum adhesive strength. Professional Installation Recommended: If you're unfamiliar with carbon fiber fitment or adhesive application, book a professional installer. Poor alignment can compromise aesthetics and water sealing. Victorious can recommend approved fitters in your region—call us. Why Choose This Spoiler Carbon fiber isn't just about weight savings—it's about permanence. Unlike paint-matched plastic lips that fade and crack, genuine carbon fiber deepens in character, resists salt spray, and requires nothing more than occasional water rinse and a soft cloth. The L494 Sport is already aggressive. This lip simply completes that story, adding a contemporary accent that signals refinement without shouting. It pairs beautifully with black window trim, darkened lights, or a full aero package. Ready to Elevate Your Sport? Authentic carbon fiber. Direct fit. 30-day guarantee. Worldwide shipping via DHL, FedEx, or UPS. Shop Carbon Fiber Tailgate Lips Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping included +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Product compatibility information is provided in good faith for reference only; always confirm fitment with your vehicle's specific year, chassis code, and configuration before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Hood Vents for Range Rover Sport L494 Genuine carbon fiber vents that enhance cooling airflow while adding understated motorsport styling to your L494. L494 2014–2020 Carbon Fiber Direct Fit Engine Cooling Overview The Range Rover Sport L494 (2014–2020) is a dynamic performance SUV that demands equally compelling aesthetics. These carbon fiber hood vents are engineered to replace your OEM vents with genuine, lightweight carbon fiber units that enhance both form and function without compromise. Beyond visual impact, these vents facilitate active heat dissipation from the engine bay, supporting cooler running temperatures during sustained driving and towing. The purposeful design integrates seamlessly with the L494's existing bonnet geometry, requiring no modification or custom drilling—installation is a straightforward bolt-on upgrade. Finished in premium gloss carbon weave, they deliver the same material and precision you'd find on motorsport vehicles, elevating your Range Rover's presence while delivering tangible thermal benefits. What's Included 🏁 Carbon Fiber Hood Vents (Pair) Left & right, gloss finish, ready to install 🔧 Stainless Steel Fasteners All hardware required for direct fit 📋 Installation Guide Step-by-step instructions included Product Highlights 100% genuine carbon fiber construction with superior strength-to-weight ratio Gloss finish carbon weave for factory-quality aesthetic Engineered for direct fit with no modifications required Improves engine bay cooling and thermal management Adds motorsport visual character to your L494 Lightweight alternative to OEM plastic vents Durable resin matrix resists UV degradation Includes all stainless steel fasteners and hardware Simple hand-tool installation (no welding or drilling) Backed by our 30-day money-back guarantee Compatibility Model Year Range Fit Status Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2010–2013 Not Compatible Always verify your model year and chassis code before ordering. Check your V5C registration document or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure. Installation Difficulty: Easy · Time: 30–45 minutes Park your Range Rover on a level surface and allow the engine to cool fully. Locate the factory hood vents on either side of the bonnet, just aft of the windscreen frame. Unscrew the three fasteners securing each OEM vent using a T25 Torx driver. Carefully lift and remove the original plastic vents, noting the gasket location. Clean the vent mounting surface with a microfiber cloth to remove any debris or residue. Position each carbon fiber vent, ensure alignment with the bonnet profile, then insert the stainless steel fasteners. Tighten each fastener progressively and evenly to 8 Nm (6 ft-lb) using a torque wrench. Step back and inspect both vents for flush alignment and consistent gaps. Your new carbon fiber hood vents are now active and ready to enhance cooling and styling. Professional Installation Recommended: If you prefer not to install these yourself, our network of Victorious-certified technicians can fit them in approximately one hour. Contact us for installer availability in your region. Complete Your L494 Upgrade Carbon fiber hood vents are the signature finishing touch for a purposefully styled Range Rover Sport. Pair them with our carbon fiber splitters, side skirts, or diffusers to elevate your L494's entire exterior presence. Explore L494 Collection Order today and use code 22GET20 to unlock 20% off when you purchase any two Victorious items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Jaguar Land Rover Limited, the official manufacturer of Range Rover, Defender, Land Rover, and Discovery vehicles. All product names, logos, and brands remain the property of their respective owners. This product is designed, manufactured, and distributed by Victorious Automotive in accordance with all applicable automotive and safety standards.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Side Vents for Range Rover Sport L494 Lightweight carbon fiber side vents that sharpen your Sport's profile while improving aerodynamic flow. L494 2018–2020 Carbon Fiber Aerodynamic Direct Fit Overview The Range Rover Sport L494 is engineered for dynamic performance and refined aesthetics. These carbon fiber side vents build on that DNA by adding visual aggression and functional ventilation to your Sport's flanks, instantly elevating its presence on any road. Our carbon fiber vents are constructed from genuine, waterproof material and engineered for direct fit installation. They integrate seamlessly with the OEM body line, creating a cohesive, purposeful look that speaks to your attention to detail. The lightweight construction preserves your Sport's performance without unnecessary weight. Whether you're refining your Sport's stance or preparing for a full aerodynamic upgrade, these vents are the foundation of a truly distinctive appearance. What's Included 🎁 2 × Carbon Fiber Side Vents One pair, driver + passenger side 📋 Installation Guide Step-by-step instructions included ✓ Adhesive Backing Pre-applied for quick, secure fit 📦 Protective Packaging Damage-free delivery guaranteed Product Highlights 100% genuine carbon fiber construction Waterproof and UV-resistant finish Seamless direct fit for L494 (2018–2020) Lightweight design preserves performance Enhances aerodynamic flow Pre-installed adhesive backing No drilling or modifications needed OEM-matched body integration Professional appearance, DIY installation Backed by 30-day money-back guarantee Compatibility Model Year Range Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Verify your vehicle's model year and body code before ordering. These vents are engineered exclusively for the L494 generation (2018–2020). If you own a different generation, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) for alternatives. Installation Difficulty: Beginner | Time: 15–20 minutes Prepare the surface. Clean both sides of your Sport's body with isopropyl alcohol and allow to dry completely. This ensures optimal adhesive contact. Position the vents. Dry-fit each vent on its respective side (driver/passenger) to verify alignment with the body line. Apply the vents. Carefully peel back the adhesive backing and press firmly from top to bottom, working out any air bubbles. Set and cure. Allow 24 hours of cure time before washing or exposing the vents to moisture. Inspect edges. Check all perimeter edges for secure adhesion. Use heat from a heat gun if needed to improve bond strength in cold conditions. Important: Ensure your Sport's body surface is clean and dry before installation. Installation in temperatures below 10°C may reduce adhesive strength—wait for warmer conditions if possible, or use a heat source to warm the application area. Complete Your L494's Look Carbon fiber side vents are the finishing touch that transforms your Range Rover Sport from standard to standout. Pair them with our matching aerodynamic upgrades for a fully integrated, purposeful aesthetic. Shop Range Rover Sport L494 Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day money-back guarantee 📦 Worldwide DHL, FedEx, UPS, TNT shipping ☎️ +44 203 943 9919 – Expert support Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover (JLR). All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for the specified vehicle model(s) and is not an OEM product.

Victorious Automotive · Range Rover Sport L494 · Lighting Aftermarket LED Rear Tail Light Assembly for Range Rover Sport L494 (2014–2020) — 2018 Facelift Style A direct-fit LED tail light upgrade that brings the sharper, more contemporary lighting signature of the post-facelift Sport to pre-facelift models — without modification. Range Rover Sport L494 2014–2020 LED Lighting ABS + PC 12V Facelift Style Direct Fit Pair Included CCC Certified LR116468 / LR116471 Overview The Range Rover Sport L494 remains one of Land Rover's most compelling performance SUVs — a vehicle that balances genuine off-road capability with a presence on the road that few rivals can match. Whether you're running a pre-facelift 2014–2017 model or the refreshed 2018–2020 version, the rear end is central to how the Sport is perceived from behind. These aftermarket LED tail light assemblies are engineered to the proportions and mounting points of the L494 platform, offering a direct replacement or a stylistic upgrade to the 2018 facelift LED light signature. The result is a cleaner, more modern rear graphic — with no cutting, no rewiring, and no compromises to build quality. Constructed from impact-resistant ABS and optically clear polycarbonate, they're built to endure the same conditions your Sport handles every day. For owners looking to modernise the rear aesthetic of an early L494, or simply replace a damaged unit with something that performs and looks better than the original fitment, these lights represent a considered, high-value upgrade. Full LED operation means faster illumination response and longer service life compared to conventional halogen units — two qualities that matter whether you're on a motorway or a mountain pass. What's Included 🔴 Left LED Tail Light Driver-side assembly — LR116468 🔴 Right LED Tail Light Passenger-side assembly — LR116471 🔩 Mounting Hardware All necessary fixings for installation 📄 Installation Guide Basic fitting reference document Product Highlights Direct-fit replacement for Range Rover Sport L494 (2014–2020) — no modification required Emulates the 2018 facelift LED rear light signature for a modernised appearance Full LED construction across all functions — brake, tail, indicator, reverse Faster illumination response versus halogen for improved road safety ABS + polycarbonate construction resists impact, UV degradation and weathering 12V direct operation — plug-and-play with standard L494 wiring looms CCC certified — meets required electrical and safety standards Supplied as a matched pair — left and right included in every order Part references LR116468 (left) and LR116471 (right) for easy cross-referencing Lightweight at 3kg total — no impact on vehicle dynamics or boot access Compatibility Model Code Year Range Trim / Notes Fitment Range Rover Sport L494 2014–2017 Pre-facelift — upgrade to facelift style Direct Fit Range Rover Sport L494 2018–2020 Facelift — like-for-like replacement Direct Fit Range Rover Sport L461 2022–2026 New generation platform — different architecture Not Compatible Range Rover Vogue L405 2013–2021 Different body and mounting points Not Compatible Range Rover Velar L560 2017–2023 Distinct rear light architecture Not Compatible Defender L663 2020–2026 Entirely different platform and format Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–75 minutes  ·  Tools: Standard trim tools, T20 Torx driver Open the boot and locate the interior trim panel behind each tail light cluster — carefully remove it using a trim pry tool to avoid damaging the lining. Disconnect the factory wiring connector from the existing tail light assembly by pressing the release tab and pulling the plug clear. Remove the retaining nuts (typically T20 Torx) securing the light unit to the body — there are usually three or four per side. Carefully withdraw the original light assembly from the rear of the vehicle, taking care not to scratch the surrounding bodywork. Align the new LED tail light unit with the mounting studs, ensuring the weatherstrip seal sits flush against the body panel before tightening. Reconnect the wiring loom connector until it clicks firmly into place, then refit the interior trim panel. Before closing the boot, test all functions — brake, tail, indicator, and reverse — to confirm full operation on both sides. ⚠ Important: If your vehicle displays a bulb failure warning after installation, this may be due to the lower current draw of LED units versus the original halogen lamps. A load resistor or LED-compatible flasher relay may be required to resolve this. Professional installation is recommended if you are unfamiliar with automotive electrical systems. Upgrade Your Sport's Rear End The right lighting upgrade changes how your Range Rover Sport is perceived — day and night. Browse the full L494 accessory range or get in touch with our team if you have compatibility questions. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, authorised by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and part numbers referenced on this page are used solely for compatibility identification purposes. This product is an aftermarket part and is not a genuine Land Rover OEM component.

Victorious Automotive · Range Rover Sport L494 & Vogue L405 · Exterior Styling Carbon Fiber Side Mirror Caps for Range Rover Sport L494 & Vogue L405 (2013–2020) Precision-formed real carbon fiber mirror covers that replace your factory housings with a race-inspired finish — no drilling, no cutting, no compromise. Range Rover Sport L494 Range Rover Vogue L405 2013–2020 Real Carbon Fiber Direct Fit Pair Included No Modifications Exterior Styling Overview The Range Rover Sport L494 and Vogue L405 are two of the most commanding vehicles on the road — refined, capable, and unmistakably purposeful. For owners who want to sharpen that presence without altering the fundamental character of the vehicle, the details matter enormously. The side mirrors are one of the most visible exterior elements, and upgrading them is one of the highest-impact styling modifications you can make. These carbon fiber mirror caps are engineered specifically for 2013–2020 Range Rover Sport (L494) and Range Rover Vogue (L405) models. Each cap is formed from genuine woven carbon fiber — not vinyl wrap, not a printed finish — giving you the authentic weight reduction and structural rigidity that real carbon fiber delivers. The gloss finish draws light in a way that painted or plastic OEM caps simply cannot match, adding visual depth and a motorsport-influenced edge to your vehicle's exterior. Designed as a direct replacement for the factory mirror housings, these caps clip cleanly into place using the original mounting points. There's no need to source specialist tools or modify your vehicle in any way. For owners of the Sport who run a black pack or gloss trim, or Vogue owners looking to contrast against factory colours, the carbon weave provides an understated premium upgrade that holds its own at any level of specification. What's Included 🪞 Carbon Fiber Mirror Cap — Driver Side Left-hand mirror housing cover, fully formed carbon fiber 🪞 Carbon Fiber Mirror Cap — Passenger Side Right-hand mirror housing cover, matching carbon weave 🔧 Fitting Hardware All required clips and fasteners for OEM-style installation 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine woven carbon fiber construction — not vinyl, not film High-gloss clear coat lacquer finish for long-term UV protection Direct OEM replacement — no cutting or drilling required Lightweight design reduces unsprung mass versus factory plastic caps Precision-moulded to match factory contours and panel lines exactly Compatible with both LHD and RHD vehicle configurations Designed for both Range Rover Sport L494 and Vogue L405 platforms Resistant to fading, chipping, and general road debris impact Supplied as a matched pair for a consistent finish on both sides Complements gloss black, SVR, and Black Pack exterior specifications Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you are unsure of your vehicle's code or build year, please contact us at +44 203 943 9919 before ordering. Installation Notes ⏱ Estimated Time: 20–40 minutes  |  🔧 Difficulty: Beginner–Intermediate Ensure the vehicle is parked on a level surface with the engine off. Allow the mirror housing to cool if the vehicle has been driven recently. Using a plastic trim removal tool, carefully prise the existing factory mirror cap away from the mirror housing — work from the lower edge inward to avoid scratching the door panel. Disconnect any wiring harness connectors if your factory cap integrates indicators or puddle lights. Note connector orientation before removal. Transfer any necessary internal clips or brackets from the OEM cap to the new carbon fiber cap as directed in the installation guide. Align the new carbon fiber cap with the mirror housing, ensuring all locating tabs engage correctly before pressing firmly to clip into place. Reconnect any wiring connectors and test indicator and puddle light functions if applicable before completing installation on the second side. Stand back and confirm even panel alignment and consistent fitment on both driver and passenger sides before driving. ⚠ Note: Professional installation is recommended if your vehicle features integrated mirror indicators or heated glass wiring. Improper removal of the factory cap can damage underlying mirror housing clips. Victorious Automotive accepts no responsibility for damage caused during DIY installation. Upgrade Your Range Rover the Right Way At Victorious Automotive, every product we stock is chosen specifically for Land Rover and Range Rover owners who demand more from their vehicles. These carbon fiber mirror caps are the kind of detail that separates a well-specced Sport or Vogue from everything else on the road. Shop Range Rover Sport Accessories Shop Range Rover Vogue Accessories Buying two items? Save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔁 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Front Centre Grille Insert — Range Rover Sport L494 (2018–2019) A precision-cut carbon fibre grille insert engineered exclusively for the 2018–2019 Range Rover Sport, delivering a purposeful, track-inspired aesthetic with zero compromise on fitment or finish. Range Rover Sport L494 2018–2019 Carbon Fibre Front Grille Insert Exterior Styling Direct Fit CE Certified Model: SJC-HD251 Lightweight Overview The 2018–2019 Range Rover Sport L494 occupies a rare space — a vehicle that feels equally at home on a city boulevard or a fast-flowing back road. It is a machine defined by presence, and the front end is the first thing anyone sees. The factory grille, while refined, leaves room for those who want their Sport to read as something a little more serious. This carbon fibre front centre grille insert is designed to sit directly within your existing grille aperture, replacing the standard infill with a woven carbon surface that immediately shifts the visual weight of the vehicle's nose. The result is subtler than a full grille replacement but no less impactful — the deep, layered texture of real carbon fibre catches light in a way that painted or chrome finishes simply cannot replicate. Manufactured from high-grade carbon fibre composite with a clear-coated gloss finish, the insert is both lightweight and structurally sound. It has been dimensioned specifically to the L494 facelift-era Sport front end, ensuring the fitment is clean and precise rather than approximate. If you're building a cohesive exterior look or simply want to elevate one key detail, this is a straightforward, high-return modification. What's Included 🪟 Front Centre Grille Insert × 1 Carbon fibre composite, gloss clear-coat finish, model SJC-HD251 📦 Protective Packaging Foam-wrapped and boxed for safe international transit Product Highlights Genuine carbon fibre composite construction — not a printed or wrapped finish Gloss clear-coat topcoat for UV resistance and long-term surface protection Precision-cut to match the L494 Sport front grille aperture dimensions exactly Lightweight material reduces negligible added mass at the front end Deep woven weave pattern visible under all lighting conditions Replaces the standard infill section for a clean, factory-integrated appearance CE certified — meets applicable European product safety standards Compatible with both standard and SVR-adjacent front end configurations (2018–2019) Dimensions: 110cm L × 30cm H × 11cm W — no trimming required for direct fitment Pairs well with carbon mirror caps, bonnet vents, and rear diffuser upgrades Compatibility Vehicle Model Code Year Range Fitment Range Rover Sport L494 2018–2019 Direct Fit Range Rover Sport L494 2013–2017 Verify Before Ordering Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes  ·  Professional Installation Recommended Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the front end. Using appropriate trim removal tools, carefully disengage the factory grille assembly from the front bumper. Refer to a workshop manual or online guide specific to the 2018–2019 L494 Sport for clip locations. Remove the existing centre grille infill panel from the grille frame. This is typically retained by press-fit clips along the perimeter — work around the edges methodically to avoid cracking the surrounding surround. Offer up the carbon fibre insert and confirm alignment within the aperture before committing to fitment. Check all edges sit flush with the surrounding frame. Secure the insert using the original clip points or a suitable automotive-grade adhesive trim tape where clips are not retained. Ensure the surface is clean and dry before applying any adhesive. Refit the grille assembly to the bumper, confirming all clips and retaining points are fully seated before stepping back to inspect the finished result. ⚠ Note: Installation instructions are not included with this product. If you are not confident working with front bumper assemblies or trim components, we strongly recommend entrusting this installation to a qualified automotive technician or body shop familiar with Land Rover vehicles. Built for Range Rover Sport Owners Who Mean It Every component we stock at Victorious is chosen with one type of owner in mind — someone who knows their vehicle well, expects quality, and won't accept compromise. This carbon fibre grille insert is exactly that kind of part: understated, precise, and built to last. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fibre Side Vents — Range Rover Sport L494 (2014–2017) A sharp, purposeful exterior upgrade — carbon fibre look side vents purpose-built for the pre-facelift Range Rover Sport L494, fitting cleanly in place of the factory originals with zero modification required. L494 2014–2017 Carbon Fibre Look Side Vents Exterior Styling Direct Fit DIY Install Pre-Facelift Overview The Range Rover Sport L494, produced from 2013 through to the 2017 model year, is one of the most visually commanding SUVs to have emerged from Solihull. Its wide-set stance, raked roofline and sculpted flanks reward owners who pay close attention to the details — and few areas offer a more impactful upgrade opportunity than the side vents sitting just behind the front wheels. These carbon fibre look side vents are designed as a direct, like-for-like replacement for the factory items on pre-facelift L494 Sport models. Finished in a high-quality carbon look weave, they replace the standard units instantly — adding a performance aesthetic that references the Sport's motorsport-inspired character without the weight or cost of full dry carbon. The result is a subtle but unmistakable visual shift: darker, more defined flanks that complement the Sport's already aggressive profile. Whether paired with gloss black accessories or left to contrast against the factory body colour, these vents read as a considered, enthusiast-led choice rather than an afterthought. What's Included 🪶 Carbon Look Side Vents Pair (left & right), pre-facelift L494 specific fitment 🔩 Fitting Hardware All necessary clips and fixings for a secure OEM-style fit 📋 Fitment Guide Step-by-step installation reference included 📦 Protective Packaging Foam-lined box to ensure safe delivery in transit Product Highlights Purpose-built fitment for L494 Range Rover Sport 2014–2017 only Carbon fibre look finish — high-gloss weave aesthetic Direct OEM replacement — no cutting, drilling or modification Sold as a pair — both driver and passenger side included Lightweight construction — negligible weight addition Compatible with all trim levels across the 2014–2017 model range DIY-friendly installation — achievable in under 30 minutes Complements gloss black, carbon, and dark chrome exterior packs Precision-moulded for flush, factory-finish panel alignment Durable finish resistant to UV fading and weathering Compatibility Model Code Year Range Fit Range Rover Sport L494 2013–2017 (Pre-Facelift) Direct Fit Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible ⚠ Important Fitment Note: These vents are designed exclusively for the pre-facelift Range Rover Sport L494 (2013–2017). The 2018 facelift and all subsequent models feature a revised front bumper and vent surround design — these parts will not fit and should not be ordered for those vehicles. If you are unsure of your exact model year or build, please contact our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool, soft cloth Park on a level surface and ensure the vehicle is switched off. Allow the engine bay to cool if recently driven. Using a plastic trim removal tool, carefully unclip the factory side vent from the bumper surround. Work around the perimeter to release all retaining clips without marking the bodywork. With the original vent removed, clean the mounting recess with a soft cloth to remove any debris or residue before fitting the new unit. Align the carbon look vent into position, ensuring all clip points are correctly located before applying gentle, even pressure to seat each clip fully. Repeat on the opposite side. Run a finger around the perimeter of each vent to confirm a flush, even fit with no gaps or proud edges. Step back and inspect both sides for alignment. Clean the finish with a detailing cloth to remove any fingerprints before driving. ⚠ Tip: A plastic pry tool rather than a metal screwdriver is strongly recommended to avoid scratching the bumper surround during clip removal. Take your time on the first side — the second will feel significantly easier once you understand the clip pattern. Upgrade Your Sport the Right Way These carbon fibre look side vents are one of the quickest and most impactful exterior changes you can make to your pre-facelift Range Rover Sport L494. Explore the full range of Sport exterior accessories at Victorious — built specifically for owners who know the difference. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 Expert advice Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Front Grille Replacement for Range Rover Sport L494 (2014–2017) A bold, precision-formed ABS grille in high gloss black — designed to replace your factory unit and immediately sharpen the front-end presence of your Range Rover Sport. Range Rover Sport L494 2014–2017 High Gloss Black ABS Construction Direct Replacement No Drilling Required OEM-Style Fit Front Grille Overview The Range Rover Sport L494 (2014–2017) is a vehicle that strikes a careful balance between restrained British elegance and commanding road presence. The front grille is one of the most defining visual elements on the Sport — it frames the bonnet line, anchors the headlights, and sets the tone for the entire aesthetic. If your factory grille has become tired, damaged, or simply no longer reflects how you want your Sport to look, replacing it is one of the most impactful single modifications you can make. This High Gloss Black Front Grille has been engineered specifically for the Range Rover Sport L494 facelift and pre-facelift models produced between 2014 and 2017. Constructed from high-quality ABS thermoplastic, it replicates the geometry and mounting points of the original unit to the millimetre — allowing for a clean, rattle-free fitment without any modification to your vehicle's bodywork or wiring. The high gloss black finish adds a darkened, contemporary edge that complements the Sport's inherently athletic character. Whether you're refreshing a worn-out original or simply pursuing a blacked-out front-end aesthetic, this grille delivers a meaningful visual upgrade with a straightforward installation process. It's the kind of detail that separates a cared-for Sport from everything else on the road. What's Included 🔲 High Gloss Black Front Grille 1x full replacement grille unit — pre-assembled and ready to fit 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Engineered exclusively for Range Rover Sport L494 (2014–2017) — no universal-fit compromise High gloss black ABS finish delivers a premium, showroom-quality appearance Direct OEM replacement — uses all factory mounting points and clips No drilling, cutting, or bodywork modification required Durable ABS thermoplastic construction resists impact, UV fade, and road debris Replicates original grille geometry for a seamless, rattle-free fit Suitable for both pre-facelift and mid-cycle Sport variants within the 2014–2017 window Complements blacked-out trim packages and SVR-inspired styling builds Lightweight construction — does not affect aerodynamic balance or air intake flow Tool fitment achievable with standard workshop tools in under an hour Compatibility Vehicle Code Years Trim / Notes Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport L494 2013 First model year — grille surround differs Verify Before Purchase Range Rover Sport L494 2018–2022 Post-facelift — revised grille architecture Not Compatible Range Rover Sport L461 2022–2026 New generation — entirely different platform Not Compatible Range Rover Vogue L405 2013–2021 Different grille design and dimensions Not Compatible Range Rover Velar L560 2018–2022 Closed-face grille — not applicable Not Compatible Installation Notes Difficulty: Beginner · Estimated Time: 30–60 minutes · Tools Required: Trim removal tools, T20 Torx driver Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for improved access to the upper grille mounting points. Using a plastic trim removal tool, carefully prise the existing grille away from the bumper surround, starting from the outer edges and working inward to disengage the retaining clips without cracking the bumper fascia. Locate and remove any Torx screws (typically T20) securing the grille to the upper bumper bracket. Keep all hardware — some clips and screws may be reused during installation of the new unit. Fully remove the original grille and set aside. Clean the mounting recess with a dry cloth to remove any accumulated road grime before fitting the replacement. Align the new High Gloss Black Grille with the factory aperture, ensuring all clip housings are correctly positioned against their corresponding receptacles in the bumper surround. Apply firm, even pressure across the grille face to engage all retaining clips simultaneously. Refit any Torx screws removed in step 3 and torque to hand-tight. Inspect the grille perimeter to confirm uniform gaps and a flush fit against the bumper. Close the bonnet and step back to confirm alignment from distance before driving. ⚠ Important: Always use plastic trim removal tools — metal tools risk permanent scratching of the bumper paint and grille finish. If your vehicle has a front parking sensor cluster integrated into the grille surround, verify sensor positioning and clearance after fitment before driving at speed. When in doubt, consult a qualified automotive technician. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product we stock is chosen with one type of customer in mind — the owner who genuinely cares about their vehicle. If you have any questions about fitment, finish compatibility, or combining this grille with other exterior styling parts for your L494 Sport, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 5 & Range Rover · Exterior Trim Carbon Fiber Door Handle Covers for 2017–2021 Land Rover Discovery 5 & Range Rover A precision-fit carbon fiber upgrade that transforms your door handles into a visual focal point — no paint, no professional fitting, no compromise. Discovery 5 L462 Range Rover L405 2017–2021 Real Carbon Fiber 3M Adhesive Fit UV Resistant Set of 4–8 No Drilling Overview The 2017–2021 Land Rover Discovery 5 and Range Rover are vehicles built with a clear design language — commanding, considered, and refined. The door handles, while functional, are one of the few exterior details that benefit most from a well-chosen upgrade. These carbon fiber door handle covers are engineered specifically for that purpose: to close the gap between factory specification and the kind of finish that turns heads at a standstill. Each cover is crafted from genuine carbon fiber with a high-gloss lacquer finish, capturing the distinctive woven texture that carbon fibre enthusiasts expect. Lightweight by nature yet rigid under daily use, the material resists UV degradation, moisture ingress, and the kind of road debris that dulls lesser finishes over time. The result is a component that looks purposeful and performs quietly — exactly how a Land Rover owner prefers it. Fitment is handled via pre-applied 3M automotive-grade adhesive tape, meaning the entire installation process takes place on your driveway without tools, specialists, or risk to your vehicle's paintwork. Whether you're refining a daily driver or building a specification-level Discovery 5, these covers deliver a noticeable visual step-up with minimal effort required. What's Included 🪶 Carbon Fiber Door Handle Covers Set of 4–8 covers depending on configuration; genuine carbon fiber with gloss lacquer 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade 3M tape bonded to each cover for a clean, tool-free installation 📄 Installation Guide Step-by-step instructions for a professional finish from first attempt 🧹 Surface Prep Wipe Included cleaning wipe to degrease door handle surfaces prior to fitting Product Highlights Genuine carbon fiber construction — not ABS with carbon-look wrap High-gloss lacquer protects the weave and adds depth to the finish UV-resistant coating prevents fading, yellowing, or surface degradation Waterproof and resistant to road grime, bird lime, and light impacts Lightweight profile adds no meaningful weight to your door panels No drilling, cutting, or modification to your vehicle required 3M automotive adhesive provides a permanent, weather-proof bond Precision-moulded to follow the exact contour of Discovery 5 handles Compatible with both 4-door and extended configurations as applicable Brand new — supplied in protective packaging, ready to install Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2022 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 / L551 2011–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your vehicle in a dry, sheltered environment. A garage or covered driveway is ideal — avoid fitting in direct sunlight or cold temperatures below 10°C as this affects adhesive performance. Thoroughly clean each door handle with the included prep wipe, removing all grease, wax, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit each carbon fiber cover to its corresponding handle to confirm alignment and coverage. Each cover is shaped to a specific position — take a moment to familiarise yourself before committing. Peel the backing from the 3M adhesive tape on the underside of the first cover. Align the cover carefully to the handle, press firmly from the centre outward, and hold for 30–60 seconds to activate the bond. Repeat for all remaining covers. Do not wash the vehicle or expose the adhesive to water for at least 24 hours following installation to allow full cure. ⚠ Important: Confirm your exact vehicle variant and year of manufacture before ordering. Handle profiles can vary between model years and trim levels. If you are unsure of compatibility, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Upgrade Your Discovery or Range Rover Today Join over 12,300 verified Land Rover and Range Rover owners who trust Victorious Automotive for premium exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purposes of fitment identification. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Red & Black Side Vents for Range Rover Sport L494 (2014–2017) A bold, direct-fit exterior upgrade that replaces the factory side vents with a striking red and black finish — adding a performance-inspired edge to the L494 Sport's silhouette. Range Rover Sport L494 2014–2017 High-Grade ABS Red / Black Finish Direct Fit Pair Included Exterior Styling Overview The Range Rover Sport L494 is one of the most visually commanding SUVs on the road — athletic proportions, a wide stance, and a face that means business. For owners of the 2014 to 2017 model year, the factory side vents are functional but understated. If you're looking to sharpen the Sport's aesthetic and inject a touch of motorsport character, these red and black side vents are a purposeful and considered upgrade. Manufactured from high-grade ABS plastic, these vents are engineered as a direct replacement for the OEM units. The dual-tone red and black colourway adds visual drama without overwhelming the Sport's existing design language — it's the kind of detail that reads as intentional, not afterthought. Whether you're building a distinctive daily driver or looking to complement a wider exterior styling package, these vents deliver a clean, premium result. Each set is produced to strict quality control standards, ensuring consistent fitment and finish. The ABS construction is resistant to UV degradation and general weathering, meaning this upgrade is built to look sharp beyond the first week of fitting. What's Included 🔲 Left Side Vent Driver's side direct-fit replacement 🔲 Right Side Vent Passenger's side direct-fit replacement Product Highlights Direct OEM replacement — no cutting or modification required High-grade ABS construction for long-term durability Bold red and black dual-tone finish UV-resistant material — resists fading over time Strict quality control across build and finish testing Supplied as a matched left and right pair Lightweight design — no added stress to bodywork Complements aftermarket wheel, grille, and body kit upgrades 100% brand new — not refurbished or reconditioned Fits all trim levels of the L494 Sport (2014–2017) Compatibility Model Code Years Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (Pre-facelift) Verify Before Ordering Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, plastic clips (if needed) Ensure the vehicle is parked on a flat surface with the engine off and fully cooled down before beginning. Using a plastic trim removal tool, carefully prise the existing OEM side vent away from the bodywork, working around the perimeter to release each retaining clip without damaging the surrounding paintwork. Disconnect any retaining clips or fixings holding the original vent in place and set aside for reference. Note the clip positions as the new vent uses the same mounting points. Offer up the new red and black side vent to the aperture, aligning it carefully with the mounting points before applying firm, even pressure to click each clip into place. Repeat the process on the opposite side, then step back and inspect both vents for flush fitment and consistent panel gaps before considering the job complete. ⚠ Please Note: No installation instructions are included with this product. If you are unsure about any stage of the fitting process, professional installation by a qualified automotive technician or detailer is strongly recommended to avoid damage to your vehicle's bodywork or trim. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product in our Range Rover Sport L494 collection is selected with the discerning owner in mind. If you have any questions before purchasing, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop Range Rover Sport L494 Collection Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Range Rover Sport L494 Side Vents – Black Effect (2014–2017) Sharpen the flanks of your Sport with precision-moulded black ABS side vent inserts — a direct OE-style replacement that delivers an assertive, blacked-out finish with zero compromise on fitment. L494 2014–2017 High-Grade ABS Black Effect Finish Direct Fit Pair Included Exterior Styling No Drilling Required Overview The Range Rover Sport L494 is one of the most recognisable performance SUVs on the road — and the details matter. The factory side vent grilles are a defining feature of the Sport's character, framing the front quarter panels with an aggressive, purposeful stance. Over time, however, the original chrome or body-coloured inserts can appear dated, particularly if you're looking to bring a darker, more dynamic edge to the vehicle's exterior. These Side Vent Inserts in Black Effect are engineered specifically for the Range Rover Sport L494 2014–2017 model years. Moulded from high-quality ABS plastic, each piece is formed to match the exact geometry of the factory aperture — meaning no gaps, no misalignment, and no fuss. The black effect finish introduces a stealthy, cohesive aesthetic that pairs beautifully with both standard and SVR-inspired body styling. Supplied as a matched pair — one left and one right — these vents are a straightforward weekend upgrade that visually transforms the front quarter of your Sport without the need for specialist bodywork or permanent modification. For owners who want their L494 to look sharper, more focused, and unmistakably intentional, this is one of the most cost-effective exterior upgrades available. What's Included 🖤 Left Side Vent Insert Driver-side black ABS vent grille 🖤 Right Side Vent Insert Passenger-side black ABS vent grille Note: Fitting instructions are not included. Professional installation is recommended. Product Highlights Direct replacement for OE side vent grilles on L494 2014–2017 High-grade ABS construction for durability and UV resistance Black effect finish for a dark, aggressive aesthetic upgrade Precision-moulded geometry ensures exact aperture fitment Supplied as a complete pair — left and right included No drilling, cutting, or permanent modification required Consistent finish across both pieces for a factory-level appearance Lightweight construction — no impact on vehicle dynamics Ideal complement to gloss black or satin black styling packages 100% brand new — inspected to strict quality control standards Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (Pre-facelift) Verify Before Ordering Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2022 Not Compatible Range Rover Velar L560 2017–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you're unsure about fitment for your specific build, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm before you order. Installation Notes 🔧 Difficulty: Easy · Estimated Time: 30–60 Minutes · Tools Required: Trim removal tool, clean microfibre cloth Ensure the vehicle is parked on a level surface and the ignition is off. Allow the front bumper area to cool if the vehicle has been recently driven. Using a trim removal tool, carefully unclip the existing factory side vent grille from the front quarter panel aperture. Work slowly from one edge to avoid cracking the surrounding bumper trim. Clean the aperture recess thoroughly with a microfibre cloth to remove any dirt, wax residue, or moisture that could prevent the new vent from seating flush. Align the new black ABS vent insert into the aperture, ensuring the mounting tabs are correctly positioned before applying any pressure. Press firmly and evenly across the vent until all clips engage and the piece sits flush with the surrounding panel. Repeat for the opposite side. Step back and inspect both sides for alignment and consistency. No further fasteners or adhesive are required under normal fitting conditions. ⚠ Please Note: No fitting instructions are included with this product. If you are not confident working with exterior trim components, professional installation by a qualified automotive technician is strongly recommended. Incorrect removal of existing clips may cause damage to the surrounding bumper trim. Complete Your Sport's Look Browse our full Range Rover Sport L494 collection for grille upgrades, mirror covers, bonnet vents, and more — all designed to the same standard of precision fit and finish. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Protection Front & Rear Bumper Guard Protection Plates for Range Rover Sport L494 (2018–2021) Precision-laser-cut stainless steel bumper guard plates engineered to shield the front and rear bumpers of your 2018–2021 Range Rover Sport from road debris, scratches, and daily wear — without compromising its commanding aesthetic. Range Rover Sport L494 2018–2021 Stainless Steel Front & Rear Drill-Free Fitment Laser Cut Exterior Protection Direct Bolt-On Overview The 2018–2021 Range Rover Sport L494 is one of the most visually assertive SUVs on the road — a vehicle that earns its presence whether navigating city streets or covering open terrain. Its low-slung bumper lines and sculpted lower body panels are defining design features, but they're also among the most exposed surfaces to stone chips, kerb contact, grit, and trailing debris. Over time, even minor accumulation of wear on these areas begins to undermine the confidence the Sport is designed to project. These Front and Rear Bumper Guard Protection Plates are designed specifically for the L494 Sport's 2018–2021 facelift generation, using precision laser-cutting to match the exact contours of the bumper's lower face. Manufactured from high-grade stainless steel, each plate delivers genuine structural defence against mud, gravel, and road debris — acting as a sacrificial shield between the elements and your original paintwork. Unlike generic universal guards, these plates integrate flush with the bumper line, maintaining the Sport's purposeful silhouette rather than disrupting it. Installation requires no drilling, no cutting, and no specialist tools. The plates bolt directly onto existing mounting points using the hardware provided, meaning fitment is clean, reversible, and achievable at home in under an hour. For owners who refuse to let daily mileage take the edge off a vehicle they've invested in, these plates are a straightforward, high-quality solution. What's Included 🛡️ Front Bumper Guard Plate Laser-cut stainless steel, L494 Sport fitment 🛡️ Rear Bumper Guard Plate Matched pair, same material and finish 🔩 Mounting Hardware All fixings required for direct bolt-on installation 📄 Installation Instructions Step-by-step fitment guide included Product Highlights Precision laser-cut for exact flush fit on the L494 Sport bumper profile High-grade stainless steel construction resists corrosion and impact Covers both front and rear bumper lower sections in one package Protects original paintwork from stone chips, grit, and debris Drill-free, direct bolt-on installation onto OEM mounting points No special tools required — achievable with standard home equipment Reversible fitment — fully removable without leaving permanent marks Maintains the Sport's factory aesthetic without visual compromise Designed specifically for the 2018–2021 L494 facelift generation Enhances the purposeful, rugged stance of the Range Rover Sport Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L494 (Facelift) 2018–2021 Direct Fit Range Rover Sport L494 (Pre-Facelift) 2013–2017 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: Basic hand tools only Ensure the vehicle is parked on a flat, stable surface and the ignition is off. Allow the bumper area to cool if the vehicle has been recently driven. Clean the front and rear bumper lower surfaces thoroughly with a dry microfibre cloth to remove any dirt, grease, or moisture that could affect fitment alignment. Locate the existing OEM mounting points on the lower bumper — these are the anchor positions the guard plates are designed to align with directly. Offer up the front guard plate to the bumper, aligning the pre-drilled holes with the OEM mounting points. Confirm flush contact across the full width before securing. Hand-tighten the provided fixings first to confirm alignment, then tighten to the recommended torque using the included hardware. Do not over-tighten stainless steel fixings. Repeat the same process for the rear bumper guard plate, ensuring equal gap consistency along the lower edge. Step back and visually inspect both plates for level fitment and symmetry. Wipe down with a clean cloth to remove any fingerprints before driving. ⚠ Important: Confirm your exact model year is 2018–2021 L494 before installation. The facelift and pre-facelift L494 bumpers differ in profile. Fitting to an incompatible year may result in poor alignment or gaps. If in doubt, contact us before proceeding. Built for Range Rover Sport Owners Who Demand More At Victorious Automotive, every accessory we carry is selected for owners who take their vehicle seriously. These bumper guard plates are a practical investment in preserving the condition and appearance of your 2018–2021 Range Rover Sport L494 — one that pays for itself the first time it deflects a stone chip that would have gone straight to bare metal. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Range Rover, Range Rover Sport, and L494 — are the property of their respective owners and are used solely for the purpose of fitment identification and compatibility reference.

Victorious Automotive · Range Rover Sport L494 · Window Visors Window Visor Vent Shades for 2014–2023 Range Rover Sport — Rain, Sun & Wind Guard Deflectors Precision-moulded side window deflectors that let you keep the windows cracked in any weather — rain, wind, or glaring sun — without compromising the Sport's refined interior environment. Range Rover Sport L494 2014–2023 High-Grade ABS Plastic No-Drill Fit Rain Deflector Wind Guard Sun Visor ISO 9001 Certified Set of 4 Overview The Range Rover Sport L494 is built for owners who demand performance without compromise — a vehicle equally at home on a motorway cruise as it is navigating demanding terrain. That same standard should extend to every accessory fitted to it. These window visor vent shades are engineered specifically for the L494 Sport's door aperture profile, sitting flush with the roofline and complementing the vehicle's aerodynamic silhouette rather than fighting against it. Crafted from high-impact ABS plastic and formed to match the exact curvature of the Range Rover Sport's door frames, these deflectors create a controlled gap that allows fresh air to circulate inside the cabin even when rain is falling. The result is a noticeably fresher interior environment, reduced fogging on cooler days, and a meaningful reduction in wind buffeting noise when windows are slightly open at speed. Unlike generic universal-fit deflectors that sit awkwardly on the glass and peel away over time, these are tailored to the Sport's door geometry and install via a secure channel-mount system that requires no drilling, no adhesive, and no modification to your vehicle. Once fitted, they present a clean, tinted finish that reads as a factory option — which is precisely the level of detail Range Rover Sport owners expect. What's Included 🪟 Front Left Visor Driver's side, pre-formed to door profile 🪟 Front Right Visor Passenger's side, mirror-matched fit 🪟 Rear Left Visor Rear door, full-length deflector 🪟 Rear Right Visor Rear door, full-length deflector 📋 Fitment Instructions Step-by-step installation guide included Product Highlights Precision-moulded to fit Range Rover Sport L494 door profiles exactly — no gaps, no overhang Deflects rain away from the window opening, keeping cabin dry with windows ajar Reduces wind buffeting noise when driving with windows cracked at motorway speeds Improves interior air circulation without exposing passengers to direct wind or rain No-drill, channel-mount installation — preserves your vehicle's factory door finish High-impact ABS plastic construction resists UV fading, cracking, and warping over time Tinted smoke finish integrates cleanly with the Sport's window line aesthetic ISO 9001 certified production process ensures consistent quality across every unit Helps reduce interior fogging in cooler, damp conditions by allowing controlled ventilation Suitable for both standard and SVR Sport variants across the full 2014–2023 model range Compatibility Vehicle Code Years Fit Range Rover Sport (Standard) L494 2014–2023 Direct Fit Range Rover Sport SVR L494 2015–2023 Direct Fit Range Rover Sport HSE / HST L494 2014–2023 Direct Fit Range Rover Sport SE / Autobiography L494 2014–2023 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2022–2026 Range Rover Sport L461, please visit our New Range Rover Sport L461 collection for compatible accessories. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Clean the door frame channel and window rubber seals on all four doors with a damp cloth. Ensure the surface is completely dry before proceeding. Lower each window fully before beginning fitment. This allows easier access to the door channel and prevents any pressure on the glass during installation. Starting at the front of the door, locate the leading edge of the visor and slide it into the upper door channel. Work gradually from front to rear, pressing the retention clips firmly into position as you go. Once seated, raise the window slowly to check that the visor does not obstruct window travel. The glass should pass smoothly without catching the visor's lower edge. Repeat for all four doors. No adhesive, drilling, or modifications to the door frame are required. ⚠ Note: Verify your exact model year before fitting. Vehicles produced in the 2022–2023 model year should be confirmed as L494 generation — not the newer L461 platform — as door profiles differ. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you fit. Built for the Range Rover Sport. Finished to Match. At Victorious Automotive, every product we list is selected for owners who care about the details. These window visors aren't an afterthought — they're a considered addition to one of the finest SUVs on the road. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L494 · Front Grille Upgrades SVR Style Front Centre Grille for Range Rover Sport L494 (2014–2017) Instantly elevate the front-end presence of your Range Rover Sport with an SVR-inspired centre grille — precision-engineered for a factory-accurate fitment on 2014–2017 L494 models. Range Rover Sport L494 2014–2017 SVR Style Front Centre Grille Direct Fit Premium ABS No Cutting Required Exterior Upgrade Overview The Range Rover Sport L494 is one of the most visually dynamic SUVs on the road — and the front grille is central to that identity. Whether you're refining a facelift model or giving your pre-facelift Sport a contemporary edge, the front centre grille is one of the first things anyone notices. The standard grille does its job, but it leaves performance character on the table. This SVR Style Front Centre Grille is designed to replicate the aggressive, purposeful aesthetic of the Range Rover Sport SVR — bringing that motorsport-derived front-end language to standard and SE-spec L494 models from 2014 through to 2017. Constructed from high-grade ABS polymer, it is finished to exacting standards and engineered to clip directly into the factory aperture without any modification to your vehicle's bodywork. For Sport owners who want their vehicle to look the part without a full body kit, this grille is one of the most impactful and cost-effective upgrades available. The transformation is immediate, and the fitment is precise enough that most observers will simply assume it came from the factory. At Victorious, we supply only components that meet the quality expectations of the vehicles they're made for — this grille is no exception. What's Included 🔲 SVR Style Centre Grille One front centre grille panel, ready to install 📄 Installation Instructions Step-by-step guide included in the box 🔩 Fitting Hardware All clips and fasteners required for installation 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights SVR-inspired design for an aggressive, motorsport-influenced front end Precision-engineered for direct OEM-style fitment on L494 2014–2017 High-grade ABS polymer construction for durability and impact resistance No cutting, drilling, or permanent modifications required Retains factory sensor and camera compatibility where applicable UV-stabilised finish to resist fading, cracking, and weathering Designed to match factory panel gaps and alignment tolerances Significant visual upgrade with minimal installation effort Lightweight construction — no added weight to the front end Compatible with standard, SE, HSE, and Dynamic trim levels Compatibility Vehicle Year Range Trim Fitment Range Rover Sport L494 2014–2017 Standard / SE Direct Fit Range Rover Sport L494 2014–2017 HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2017 Autobiography Direct Fit Range Rover Sport L494 2014–2017 SVR (Factory) Not Required Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Defender L663 2020–2026 All Trims Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, soft cloth Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet and secure it in the open position. Using a plastic trim removal tool, carefully release the retaining clips securing the original front centre grille. Work methodically from one side to the other to avoid cracking the surrounding bumper trim. Gently pull the existing grille forward and away from the bumper aperture. Set it aside on a soft cloth to avoid scratching either the grille or your paintwork. Check the aperture for any debris or clips that may have broken free during removal. Replace any damaged OEM clips before proceeding. Align the new SVR Style Centre Grille with the aperture, ensuring the mounting tabs are correctly seated before applying pressure. Press firmly and evenly across the grille face until all retaining clips engage with an audible click. Check alignment from both sides before closing the bonnet. Step back and inspect the panel gaps. If any section appears misaligned, release and re-seat the relevant clip rather than forcing fitment. ⚠ Important: Verify your exact model year and trim level before purchasing. The 2014–2017 pre-facelift L494 Sport has a different grille aperture to the 2018+ facelift variant. If you are unsure of your build date, check the VIN plate inside the driver's door jamb or contact us at +44 203 943 9919 before ordering. Upgrade Your Sport. Elevate Your Standard. The SVR grille look is one of the most recognisable upgrades you can make to a pre-facelift Range Rover Sport — and this is the cleanest way to achieve it. Explore the full range of L494 Sport accessories at Victorious and build the exact specification you want. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Grille & Vent Set — Range Rover Sport L494 (2018–2020) A precision-engineered carbon fibre styling upgrade that sharpens the front fascia of your Range Rover Sport with an assertive, motorsport-inspired presence. Range Rover Sport L494 2018–2020 Carbon Fibre Finish ABS Construction Direct Fit Grille & Vent Set Exterior Styling No Drilling Required Overview The Range Rover Sport L494 in its 2018 facelift guise already commands attention — but for owners who demand more, the standard plastic grille and vent surrounds can feel underwhelming next to the vehicle's broader capability and character. This is particularly true for Sport owners running SVR-style bodywork, Dynamic or HSE trims, where the front end benefits most from a stronger visual anchor. This Carbon Fiber Grille and Vent Set is designed as a direct replacement for the factory front grille surround and lower vent trim on the 2018 and newer Range Rover Sport L494. Constructed from waterproof, high-impact ABS with a carbon fibre-effect finish, it replicates the visual depth and texture of real weave carbon without the fragility or premium cost associated with dry carbon components. The result is a front end that reads as more aggressive, more purposeful, and more refined — all at once. Every dimension of this set has been developed to match OEM mounting points precisely. No cutting, drilling, or modification to your vehicle's bodywork is required. Whether you're building a full exterior transformation or simply looking for one high-impact change to the front of your Sport, this grille and vent set delivers a genuine visual step-up that holds up in person as well as it does in photographs. What's Included 🔲 Front Grille Surround Carbon fibre-finish ABS, main grille frame piece 🔳 Lower Vent Trim Set Matching lower bumper vent inserts, full pair 📄 Installation Guide Step-by-step fitting reference included 🔩 Mounting Hardware OEM-compatible clips and fixings where required Product Highlights Designed specifically for the 2018–2020 Range Rover Sport L494 facelift High-quality ABS construction with durable carbon fibre-effect surface finish Direct OEM replacement — no cutting, drilling, or bodywork modification Waterproof and UV-resistant for long-term exterior use in all climates Full grille and vent coverage for a cohesive, factory-finished appearance Lightweight fitment — no impact on vehicle weight distribution or aerodynamics Compatible with standard, Dynamic, HSE, and SVR-spec bumper configurations 100% brand new — never used, never refurbished Backed by Victorious Automotive's 30-day money-back guarantee Ships worldwide via DHL, FedEx, UPS, and TNT with full tracking Compatibility Vehicle Year Range Trim / Notes Fitment Range Rover Sport L494 2018–2020 SE, HSE, Dynamic, Autobiography Direct Fit Range Rover Sport L494 2018–2020 SVR Direct Fit Range Rover Sport L494 2013–2017 Pre-facelift models Not Compatible Range Rover Sport L461 2022–2026 All trims — different platform Not Compatible Range Rover Vogue L405 2013–2020 Different grille architecture Not Compatible Range Rover Velar 2018–2022 Different grille architecture Not Compatible Not sure which model year you have? Check your V5C or VIN plate — or call us on +44 203 943 9919 and we'll confirm compatibility before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tool, plastic pry bar, soft cloth With the vehicle parked and cooled, open the bonnet and ensure the front bumper area is clean and free of debris before beginning. Using a plastic trim removal tool, carefully release the OEM grille surround clips from the front bumper assembly, working from one side to the other to avoid stress fractures on the surrounding trim. Disconnect any ambient air temperature sensors or adaptive cruise radar connections if routed through the grille area, labelling each connector for reassembly. Remove the factory vent insert trims from the lower bumper section using the same clip-release technique, taking care not to scratch the bumper paint surface. Dry-fit the new carbon fibre grille surround and vent trims before final installation to confirm alignment and clip engagement at all mounting points. Press each component firmly and evenly into position until all clips audibly engage. Reconnect any sensors or connectors disconnected during removal. Step back and inspect the finished fitment from the front and side for panel gaps, alignment consistency, and flush finish before closing the bonnet. ⚠ Note: If your vehicle features an active grille shutter system or integrated radar hardware, we recommend having installation completed by a qualified Land Rover technician to avoid disruption to driver assistance systems. Always verify component alignment before driving. Upgrade Your Sport. Elevate Your Standard. Trusted by over 12,300 Range Rover and Land Rover owners worldwide, Victorious Automotive is the specialist choice for exterior upgrades that fit properly, look exceptional, and last. Browse the full Range Rover Sport L494 collection or get in touch — our team knows these vehicles inside and out. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Victorious · Range Rover Sport L494 · Exhaust 2020 Range Rover Sport L494 Exhaust Muffler with SVR Quad Tips – Silver Premium stainless steel quad-tip exhaust trim that transforms your Sport's rear end with commanding visual presence and lasting durability. L494 2013–2020 Stainless Steel SVR Quad Tips Adhesive Install Silver Finish Overview If you own a 2020 Range Rover Sport L494, you understand that this generation of the Sport demands presence. Every detail matters—and few details carry the visual weight of a muscular exhaust treatment. Our SVR-inspired quad-tip muffler trim is engineered specifically for the L494 chassis to deliver that high-performance look without compromise. Crafted from premium grade stainless steel, this exhaust trim cover protects your original muffler while presenting a sleek, aggressive aesthetic that commands attention. The quad-tip design echoes the motorsport DNA of Range Rover's performance lineup, instantly elevating your Sport's character. Unlike generic covers, this is laser-cut for pixel-perfect fitment on your 2020 model. Installation is straightforward using high-quality automotive adhesive tape. The silver finish coordinates beautifully with most Sport configurations, catching light and adding depth to the rear quarter. Backed by our 30-day money-back guarantee, you're investing in a proven accessory trusted by thousands of Range Rover enthusiasts worldwide. What's Included ✦ Pair of Exhaust Trim Covers Stainless steel, laser-cut for L494 ✦ Automotive Adhesive Tape High-strength bonding, pre-cut ✦ Installation Guide Step-by-step instructions included ✦ Cleaning Prep Materials Surface preparation cloth included Product Highlights SVR-inspired quad-tip design for authentic performance character Premium grade 304 stainless steel—corrosion and UV resistant Laser-cut for exact L494 fitment with zero guesswork Silver finish complements factory wheels and trim accents Protects original muffler from wear, oxidation, and damage High-strength automotive adhesive tape for permanent hold Easy installation—no cutting or modification required Sophisticated alternative to chrome plating Tested in real-world UK climate conditions Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Year Range Generation Fitment Range Rover Sport 2013–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 (New) Not Compatible Range Rover Vogue L405 2013–2020 L405 Not Compatible Range Rover Velar 2018–2022 L560 Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 Minutes Prepare the surface: Clean the rear muffler area thoroughly with the included prep cloth. Remove any dirt, dust, or residue. Allow to dry completely. Heat the adhesive tape: Gently warm the adhesive tape using a heat gun (or warm (not hot) hairdryer on medium setting for 20–30 seconds per section. This activates the bonding agent. Position the trim: Carefully align the quad-tip trim cover with the muffler opening. Start at the center and work outward to avoid air bubbles. Apply pressure: Press firmly along the entire length of the trim, ensuring even contact for 30–60 seconds per section. Allow cure time: Wait a minimum of 4 hours before exposing the muffler to heat or driving. Full bond strength develops over 24 hours. Important: Do not apply tape or trim in temperatures below 10°C (50°F). Cold adhesive will not activate properly. If your climate is cool, allow the vehicle (and adhesive tape) to reach room temperature indoors before installation. Transform Your Sport's Presence The rear quarter of your Range Rover Sport deserves a finish that matches its engineering. This SVR-inspired quad-tip trim is the easiest way to inject visual drama and protect your original muffler all at once. Shop Range Rover Sport L494 Exhausts Use code 22GET20 for 20% off any 2 items 4.9/5 Stars — 12,300+ verified reviews 30-Day Guarantee — Money back, no questions Worldwide Shipping — DHL, FedEx, UPS, TNT Expert Support — +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover dealership. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility and fitment are based on manufacturer specifications and real-world testing. Always verify fitment before purchase. Victorious Automotive accepts no liability for incorrect fitment or installation damage. Refer to your vehicle's owner's manual for specific guidance.

Victorious · Range Rover Sport L494 · Exhaust 2020 Range Rover Sport SVR Style L494 Quad Tip Exhaust & Muffler – Sleek Black Design Elevate your Range Rover Sport's rear presence with an aggressive SVR-inspired quad exhaust system in premium gloss black. L494 2013–2020 Stainless Steel Dual Exhaust SVR Style High Gloss Black Overview The Range Rover Sport L494 (2013–2020) has always demanded a bold presence. Factory exhaust systems play it safe—this quad-tip system doesn't. Inspired by the high-performance SVR variant, this upgrade transforms the rear quarter in one go, delivering the stance and aggression your Sport deserves. Engineered from premium stainless steel and finished in deep high-gloss black, the dual-piece construction fits cleanly beneath the bumper, protecting your original muffler while creating a commanding visual impact. Laser-cut precision ensures zero gaps and a factory-tight finish every time. Installation is straightforward—adhesive tape and heat do the work for you. No welding, no fabrication, no compromise. Whether you're running a standard Sport or an SVR, this system adds the performance aesthetic your vehicle demands. What's Included 🏁 2× Exhaust Trim Covers Left and right quad-tip sections in high-gloss black. 🔧 Professional Adhesive Tape High-temp rated for secure, permanent bonding. Product Highlights SVR-inspired quad-tip design for aggressive aesthetics Premium stainless steel construction for longevity High-gloss black finish resists weathering and fading Laser-cut precision ensures perfect fitment Protects and enhances your original exhaust system Easy installation with included adhesive tape Professional finish—no welding or fabrication required Heat-activated adhesive for maximum bond strength Dual-piece design fits L494 factory bumper contours Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Variant Fitment Status 2013–2019 Range Rover Sport L494 Standard Direct Fit 2020 Range Rover Sport L494 Standard Direct Fit 2013–2020 Range Rover Sport L494 SVR Not Compatible Range Rover Sport L320 (2005–2013) Not Compatible Range Rover Sport L461 (2022+) Not Compatible Installation Difficulty: Easy | Time: 30–45 Minutes Clean the rear bumper area thoroughly with soap and warm water. Dry completely. Position the left exhaust trim cover over the factory muffler tip. Ensure alignment with bumper contours. Apply the high-temp adhesive tape to the reverse side of the trim cover. Warm the adhesive tape with a heat gun (150–180°C) for 10–15 seconds to activate the bond. Press the trim cover firmly against the muffler for 30 seconds while the adhesive sets. Repeat steps 2–5 for the right-side cover. Allow 24 hours full cure time before driving or washing the vehicle. Important: Do not install on SVR models—the exhaust geometry differs. Ensure bumper surface is clean and dry for optimal adhesion. Use moderate heat only; excessive temperature may damage plastic bumper trim. Transform Your Sport Today The difference between a standard Range Rover Sport and one that commands attention comes down to details. This quad-tip exhaust system is that detail. Premium finish, precise fit, backed by our promise. Shop Range Rover Sport L494 Save 20% on any two Victorious products with code 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 UK support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket parts specialist and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All vehicle names and logos are the property of their respective manufacturers. This product is designed to fit the specified vehicle model(s) and is sold as an accessory enhancement only.

Victorious Automotive · Range Rover & Land Rover · Exterior Protection Pre-Cut Headlight Tint Film — Range Rover, Sport, Evoque, Velar & Discovery Sport (2015–Present) Precision pre-cut TPU headlight protection film with self-healing technology — available in blackout or transparent finishes to sharpen the stance of your Range Rover without lifting a trim tool. L551 Evoque L494 Sport L405 Vogue Velar Discovery Sport 2015–Present TPU Film Self-Healing Blackout & Clear Pre-Cut No-Drill Install Exterior Protection Overview The Range Rover lineup — from the commanding L405 Vogue and L494 Sport through to the sleek Evoque L551 and Velar — shares an unmistakable design language built around sharp, purposeful lighting. The headlamps are a centrepiece of that visual signature, and keeping them looking factory-fresh against road debris, stone chips, UV fade and fine scratches is something every enthusiast should consider from day one. This pre-cut headlight tint film is engineered specifically for each model in the Land Rover family, arriving as a precisely contoured set of two pieces that hug every curve of your headlight housing with no trimming, guesswork or bubbling. Manufactured from high-grade TPU (Thermoplastic Polyurethane), the film features genuine self-healing technology — minor surface scuffs and light abrasions disappear with heat exposure, maintaining a consistently flawless finish over time. Choose the blackened finish to intensify the visual aggression of your Range Rover's front end, giving it a smoked, purposeful look that complements blacked-out grilles, dark alloys and contrast trim. Or opt for transparent if you want invisible, undetectable protection that preserves your factory aesthetic entirely. Either way, the adhesive is engineered to bond cleanly without leaving residue, and the film removes cleanly when you're ready — no damage, no ghosting. What's Included 💡 2× Pre-Cut Headlight Films One per headlamp, precision die-cut to your model 🧰 Installation Tool Kit Complimentary squeegee and applicator included 🧴 Application Solution Slip solution for bubble-free positioning 📋 Installation Guide Step-by-step instructions for a clean finish Product Highlights Pre-cut to exact headlight profiles — no trimming required on any supported model High-grade TPU construction for superior flexibility, clarity and durability Self-healing surface technology — minor scratches disappear with heat exposure Available in blackened (smoked) and transparent (clear) finishes UV-resistant formulation protects headlight lenses from yellowing and fading Hydrophobic outer surface repels water, road grime and insect residue Residue-free removal — leaves no adhesive ghosting on factory lenses Peel-and-stick application — no professional fitting or heat gun required Maintains full headlight output — no visible light reduction on clear variant Compatible across eight Range Rover and Land Rover model variants Compatibility Vehicle Years Fitment Range Rover Vogue (L405) 2013–2017 Direct Fit Range Rover Vogue (L405) 2018–Present Direct Fit Range Rover Sport (L494) 2014–2017 Direct Fit Range Rover Sport (L494) 2018–Present Direct Fit Range Rover Evoque (L538) 2015–2019 Direct Fit Range Rover Evoque (L551) 2020–Present Direct Fit Range Rover Velar 2017–2020 Direct Fit Discovery Sport (L550) 2016–Present Direct Fit Range Rover Sport (L461) 2022–Present Verify Before Purchase Range Rover Vogue (L460) 2022–Present Verify Before Purchase Defender (L663) 2020–Present Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 30–45 Minutes Clean thoroughly. Wash and degrease the headlight surface completely. Any dust, wax residue or moisture beneath the film will cause lifting. Use isopropyl alcohol for a final wipe-down. Prepare your workspace. Work in a warm, dust-free environment. Cold ambient temperatures reduce adhesive performance and film flexibility. A garage or indoor setting is ideal. Mist the headlight surface with the included slip solution. This allows you to reposition the film before committing to the final placement. Peel and align. Carefully peel the backing from the film and position it over the headlight. Use the pre-cut edges as reference points to align correctly with the housing outline. Squeegee from centre outward. Using the included applicator, work from the centre of the film toward the edges to push out any air or solution trapped beneath. Allow to cure. Leave undisturbed for a minimum of 24 hours before driving. Avoid high-pressure washing for 48 hours post-installation. ⚠ Please Note: Always confirm your exact model year and headlight housing shape before applying. Minor facelift changes within a generation can affect fitment. If unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Protect the Detail. Keep the Stance. Your Range Rover's headlamps define its front-end presence. This pre-cut TPU film keeps them protected, sharp and exactly as they should look — for every mile ahead. Shop Range Rover Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by or connected to Land Rover, Jaguar Land Rover (JLR) or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for compatibility identification purposes and remain the intellectual property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 & Sport L494 · Exterior Styling Carbon Fiber Side Mirror Covers — Range Rover Vogue & Sport 2014–2020 (L405 / L494) Precision laser-cut carbon fiber mirror covers that deliver a factory-sport aesthetic on your L405 Vogue or L494 Sport — no drilling, no modification, no compromise. L405 Vogue L494 Sport 2014–2020 Carbon Fiber TPU Direct Fit Adhesive Install Exterior Styling Pair Included Overview The Range Rover Vogue L405 and Sport L494 occupy a rare space — vehicles that are equally at home on a motorway cruise and a challenging green lane. Between 2014 and 2020, both platforms received progressive styling updates, but the standard mirror housings remained understated. For owners who want the exterior to reflect the performance potential within, the mirror covers are one of the most visible and immediately impactful upgrades available. These carbon fiber side mirror covers are engineered specifically for the L405 and L494 body contours. Each cover is precision laser-cut from high-quality carbon fiber TPU — a material chosen for its resistance to UV fading, surface cracking, and temperature cycling. The woven carbon weave pattern sits beneath a high-gloss clear coat layer, giving it depth and sheen that plain gloss black alternatives simply cannot replicate. The result is a finish that looks factory-fitted, not aftermarket. Installation is straightforward and reversible. The covers attach via pre-applied 3M-grade adhesive tape and follow the exact profile of the OEM mirror housing — no tools, no permanent fixings. Whether you're refreshing a standard-spec Vogue or complementing an SVR-bodied Sport, these covers integrate seamlessly into the vehicle's design language. What's Included 🪞 Carbon Fiber Mirror Cover × 2 Left & right pair — pre-matched for L405 / L494 contours 🔧 Adhesive Installation Tape Pre-cut 3M-grade tape strips for secure, residue-free bonding 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Precision laser-cut to match the exact mirror housing profile of the L405 and L494 High-quality carbon fiber TPU construction — UV stable and temperature resistant High-gloss clear coat finish — deep weave visible beneath protective layer No drilling, no modification — adhesive-only installation preserves OEM bodywork Pre-applied adhesive tape included — no separate purchase required Full left and right pair supplied — matched from the same production batch Lightweight construction — no added stress to mirror adjustment mechanisms Resistant to car wash, rain, and road debris at motorway speeds Compatible with both standard and towing mirror variants across the 2014–2020 range Reversible installation — can be removed cleanly without damaging OEM finish Compatibility Model Platform Years Fit Range Rover Vogue L405 2014–2020 Direct Fit Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Vogue SE L405 2014–2020 Direct Fit Range Rover Autobiography L405 2014–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Evoque L538 / L551 All Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  ·  🔧 Difficulty: Easy — No Tools Required Park the vehicle and ensure the mirror housings are fully dry and at ambient temperature — avoid installing in direct sunlight or below 10°C. Thoroughly clean both mirror housing surfaces using an IPA (isopropyl alcohol) wipe or panel wipe solution. Remove any wax, polish residue, or road film entirely. Allow the surface to dry completely for a minimum of 5 minutes before proceeding. Dry-fit each carbon cover to confirm alignment and positioning before committing to adhesion. Peel the adhesive backing from the tape strips and carefully align the cover to the mirror housing from the leading edge inward. Apply firm, even pressure across the full face of the cover for at least 30 seconds to activate the adhesive bond. Avoid washing the vehicle or exposing the mirrors to heavy rain for 24 hours post-installation to allow full cure. ⚠ Note: Ensure the mirror surface is completely free of wax, silicone, or detailing product residue before applying. Contaminated surfaces will significantly reduce adhesion strength and may cause lifting at speed. Upgrade Your Range Rover Today Join over 12,300 verified Range Rover and Land Rover owners who've trusted Victorious Automotive to elevate their vehicles. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop L405 Vogue Accessories Shop L494 Sport Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport · Headlamp Protection Pre-Cut Headlamp Tint Film — Range Rover Sport L494 / L461 (2010–2023) A precision-cut TPU headlamp tint engineered specifically for the Range Rover Sport — offering factory-level fit, self-healing clarity, and lasting protection against chips, scratches, and UV fade. Range Rover Sport L494 · L461 2010–2023 TPU Film Self-Healing Blackened Finish Transparent Finish Pre-Cut Scratch-Resistant Direct Fit Overview The Range Rover Sport is one of Land Rover's most visually commanding SUVs — a vehicle where every detail matters. Whether you're driving the muscular L494 generation or the more recently evolved L461 platform, the headlamps are a defining design feature, and protecting them should be a priority. Road debris, stone chips, UV degradation and everyday wear can quickly dull the optical-grade lenses that set the Sport apart on the road. This pre-cut headlamp tint film is designed from the ground up for a seamless, bubbleless fit across a wide range of Range Rover Sport model years. Manufactured from premium thermoplastic polyurethane (TPU), it conforms naturally to the curved geometry of the headlamp housing without peeling, lifting, or distorting the light output. The result is protection that's genuinely invisible — or, if you choose the Blackened finish, a subtle darkened aesthetic that elevates the Sport's already aggressive front-end stance. Available in both Transparent and Blackened finishes, this tint film suits owners who want pure protection as much as those who want a stealthier, blacked-out appearance. The self-healing TPU surface absorbs minor surface scratches with no intervention required, keeping your headlamps looking pristine for years — not months. No specialist tools required, no body shop booking needed. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels, ready to apply 🧰 Installation Tool Kit Squeegee and application aids included as gift 📋 Application Guide Step-by-step instructions for a clean finish 🛡️ Protective Backing Layer Peel-and-apply liner for controlled installation Product Highlights Premium TPU material delivers superior flexibility and optical clarity Self-healing surface technology repairs minor scratches automatically Pre-cut to exact headlamp dimensions — no trimming required Available in Transparent and Blackened finish options UV-resistant construction prevents yellowing and haze over time Scratch and chip resistant for long-term lens preservation Bubble-free adhesive layer for a seamless, professional finish Removable without adhesive residue or damage to OEM lenses Compatible with both OEM halogen and LED headlamp units DIY-friendly installation with no specialist tools or heat gun required Compatibility Vehicle Years Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 (Facelift) 2018–2022 Direct Fit Range Rover Sport L461 2022–2023 Direct Fit Range Rover L405 Vogue 2013–2017 Direct Fit Range Rover L405 Vogue (Facelift) 2018–2021 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L320 2005–2013 Verify Before Order Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Required Thoroughly clean both headlamp lenses with isopropyl alcohol and allow to dry completely — any dust, wax, or contamination will affect adhesion. Work in a warm, dust-free environment. Temperatures between 15°C and 25°C are ideal for optimal film flexibility. Carefully peel back the protective liner from the tint film and align the pre-cut panel to the headlamp edge before committing the adhesive. Begin application from the centre of the film outward, using the included squeegee to eliminate any air bubbles as you go. Press all edges firmly — pay particular attention to the corners and lower lip of the lens housing where lifting is most common. Allow 24–48 hours curing time before washing the vehicle or exposing the film to heavy moisture. ⚠ Important: Do not apply to a wet, cold, or freshly polished surface. Avoid stretching the film during application as pre-cut dimensions are precise. If repositioning is required, work quickly before the adhesive fully bonds. Built for Range Rover Owners Who Expect More At Victorious Automotive, every product we stock is chosen with one standard in mind — it has to be good enough for our own vehicles. This headlamp tint film meets that standard. Shop with confidence backed by our 30-day money-back guarantee and 4.9-star rating from over 12,300 verified customers. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx & UPS 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious · Range Rover Sport L494 · Exhausts Range Rover Sport SVR Quad Tip Exhaust Muffler – 2018–2019 Stainless steel quad exhaust trim covers that transform your Sport's rear end into a factory SVR look—premium aesthetics without the full system cost. L494 2018–2019 Stainless Steel Chrome & Black Adhesive Install Overview The Range Rover Sport L494 (2018–2019) has always been understated in its factory guise. This quad exhaust trim cover set elevates that presence immediately, channeling the aggressive visual language of the SVR performance variant while maintaining your existing exhaust system. Engineered from aerospace-grade stainless steel, these covers arrive pre-finished in either mirror-bright Chrome or Deep High Gloss Black, giving you the flexibility to match your Sport's signature look. The lightweight construction means zero impact on handling or fuel economy—this is pure aesthetic transformation. Installation takes under 30 minutes. The supplied automotive adhesive tape is engineered for temperature resilience and vibration absorption, ensuring these stays put through seasons of motorway and track use. No drilling, no modifications, no second-guessing. What's Included 🔲 Quad Exhaust Trim Pair Left and right stainless steel covers 📋 Automotive Adhesive Tape Pre-cut pads for secure bonding 📖 Installation Guide Step-by-step with prep checklist ✓ 30-Day Money Back If not completely satisfied Product Highlights Stainless steel construction resists corrosion and maintains finish for years SVR-inspired quad design transforms rear profile instantly Chrome and High Gloss Black finishes suit every Sport specification Lightweight—zero performance impact or fuel penalty Pre-cut adhesive tape simplifies alignment and bonding Temperature-resistant adhesive handles UK heat cycles and freeze No drilling or modification to original bodywork required Direct fit for L494 Sport 2018–2019 models only Vibration-damped backing prevents rattle and movement 30-day satisfaction guarantee—risk-free investment Fitment & Compatibility Model & Year Generation Compatibility Range Rover Sport 2018–2019 L494 Direct Fit Range Rover Sport 2013–2017 L494 Not Compatible Range Rover Sport 2020+ L460 / New Gen Not Compatible Range Rover Vogue (All) L460 / L405 Not Compatible Range Rover Evoque (All) L538 / L551 Not Compatible Note: This product is designed exclusively for 2018–2019 Range Rover Sport L494 models. If you own a 2020+ Sport, view our L461 collection here. Installation DIY Difficulty: Beginner | Time: 20–30 minutes Prepare the surface: Clean the existing exhaust outlet area thoroughly with a microfibre cloth and isopropyl alcohol. Allow to dry completely (5 minutes minimum). Heat the adhesive: Use a heat gun or hair dryer on medium setting to gently warm the adhesive tape backing for 30–45 seconds. This activates the polymer bonding agents. Align carefully: Position the left trim cover first, ensuring it sits flush with the exhaust outlet edge. Use the installation guide as a visual reference. Apply firm pressure: Press down for 10–15 seconds along the entire surface, working from centre outward to remove air pockets. Repeat for right side: Follow steps 2–4 for the passenger-side cover, maintaining symmetry. Cure time: Leave untouched for 24 hours before first drive. This allows full adhesive cross-linking. Important: Do not expose the vehicle to high-temperature exhaust fumes for 48 hours post-installation. Allow adhesive to fully cure before towing or aggressive driving. Heat activation of the adhesive tape is critical for long-term durability. Ready to Elevate Your Sport? Transform your 2018–2019 Range Rover Sport into the aggressive, visual heavyweight it deserves to be. These quad exhaust trims deliver SVR-level stance without compromise. Shop Quad Exhaust Trims Use code 22GET20 to save 20% when ordering 2+ items from our Sport collection. 4.9★ 12,300+ verified reviews ✓ 30-day money back 🚚 Worldwide delivery 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names and vehicle designations are used for identification purposes only. Installation of this product does not void your manufacturer warranty, though fitment by a qualified technician is recommended. Always verify fitment with your specific VIN before ordering.