Victorious · Land Rover · Engine Cooling
5.0L V8 Heater Manifold Tube with Sensor – Discovery LR4 · Range Rover · Sport
OEM-spec heater manifold replacement with integrated coolant sensor for reliable 5.0L V8 engines.
Discovery LR4
Range Rover 2010–2022
Range Rover Sport 2010–
5.0L V8
Plastic construction
Direct OEM replacement
The Essential Cooling Component
If your Land Rover Discovery LR4, Range Rover, or Range Rover Sport is running a 5.0L V8 engine, the heater manifold tube is a critical part of your engine's thermal management system. This assembly manages coolant flow to the cabin heater while the integrated sensor monitors engine temperature in real time.
Partsmost's heater manifold tube is engineered to OEM specifications and carries an integrated temperature sensor, ensuring your V8 maintains optimal operating temperature under all driving conditions. Whether you're tackling desert expeditions or urban commutes, a functional heater manifold keeps your engine cool and your cabin comfortable.
Over time, plastic can degrade, seals can weaken, and sensors can fail. This direct replacement restores original function and reliability—backed by 12 months of manufacturer warranty and designed for straightforward installation.
What's Included
🔧
Heater Manifold Tube
Integrated coolant passage assembly with precision molding
📡
Temperature Sensor
Factory-integrated sensor; no separate installation required
📋
Mounting Hardware
All fasteners and gasket materials included
✓
12-Month Warranty
Manufacturer defect coverage with full support
Key Specifications
- Material: High-temperature plastic compound
- Engine: 5.0L V8 Supercharged & Naturally Aspirated
- Placement: Front of engine bay
- Dimensions: 34.5 cm (L) × 12 cm (W) × 7 cm (H)
- Condition: New, unopened
- OEM Part Numbers: LR018273 · LR109402
- Cross-reference: LR077042 · LR087559 · LR122709
- Direct replacement: No modifications required
- Installation difficulty: Moderate (30–45 minutes)
- Includes sensor: Yes, pre-integrated
Compatibility Guide
| Vehicle |
Year Range |
Engine |
Fit Status |
| Land Rover Discovery LR4 |
2010–2016 |
5.0L V8 Supercharged |
Direct Fit |
| Range Rover Vogue |
2010–2012 |
5.0L V8 Supercharged |
Direct Fit |
| Range Rover Vogue |
2013–2022 |
5.0L V8 Naturally Aspirated |
Direct Fit |
| Range Rover Sport |
2010–2013 |
5.0L V8 Supercharged |
Direct Fit |
| Range Rover Sport |
2014–2022 |
5.0L V8 Naturally Aspirated |
Direct Fit |
| Jaguar XFR / XJR / XKR |
2010–2020 |
5.0L V8 Supercharged |
Direct Fit |
| Jaguar F-Type / F-Pace |
2015–2020 |
5.0L V8 Naturally Aspirated |
Direct Fit |
| Other 4-cylinder engines |
Any |
Non-5.0L V8 |
Not Compatible |
📍 Verify compatibility: Cross-reference your vehicle's OEM part number (typically found on the old component or in your service documentation) against the numbers listed above. If you're unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your VIN.
Installation Overview
Difficulty Level: Moderate | Time: 30–45 minutes
-
Disconnect the battery negative terminal to prevent accidental electrical discharge.
-
Allow the engine to cool completely before working on any coolant-carrying components.
-
Drain a portion of the coolant system or be prepared to manage minor spillage during removal.
-
Locate the heater manifold tube at the front of the engine bay (passenger side, below the intake manifold on most models).
-
Disconnect the sensor electrical connector carefully; note its orientation for reinstallation.
-
Unbolt and remove the old assembly using appropriate wrenches (typically 10 mm and 13 mm sockets).
-
Clean the mounting surface thoroughly to remove old gasket material and residue.
-
Install the new heater manifold tube with the pre-installed sensor, ensuring the sensor connector faces forward.
-
Torque bolts to OEM specification (typically 25 Nm / 18 ft-lb); do not over-tighten.
-
Reconnect the sensor electrical connector until it clicks securely.
-
Refill the coolant system to the correct level; bleed air from the system if needed.
-
Reconnect the battery and start the engine; monitor temperature gauge and check for leaks.
⚠ Important: Do not overtighten fasteners—plastic components can crack under excessive torque. If you're unfamiliar with coolant system work or lack the proper tools, consult a qualified Land Rover or Range Rover technician.
Ready to Restore Peak Engine Cooling?
Keep your 5.0L V8 running cool and reliable. This OEM-spec heater manifold tube is a direct drop-in replacement—no guesswork, no compatibility issues, full 12-month warranty.
Shop Heater Manifold Tubes
Use code 22GET20 for 20% off when you buy 2 or more items.
⭐ 4.9/5 from 12,300+ verified reviews
🚚 Worldwide shipping via DHL, FedEx, UPS, TNT
💰 30-day money-back guarantee
☎ Expert support: +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or an official partner of Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Ltd. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket replacement part designed for compatibility only. Always verify fitment before purchase by cross-referencing OEM part numbers or contacting our team.
