Victorious · Land Rover · Cooling System
Premium Radiator Hose Kit – 2.0L Land Rover LR2, Evoque & Discovery Sport
Direct OEM replacement coolant hose engineered for perfect fit and long-term durability on your 2.0L petrol engine.
LR2 L359
Range Rover Evoque L538
Discovery Sport
2006–2015
Rubber Hose
Upper & Lower
2.0L 16V Petrol
Overview
If you own a Freelander 2 (LR2), Range Rover Evoque, or Discovery Sport with a 2.0L 16-valve petrol engine, this radiator hose kit is engineered as a direct replacement for original cooling circuit pathways. Whether you're chasing premium OEM-spec quality or a proven aftermarket alternative, we've sourced the hose that delivers both fitment certainty and reliability.
Coolant hoses are high-pressure conduits that must withstand engine heat cycles, thermal stress, and constant pressure fluctuations. A compromised hose risks overheating, leaks, and catastrophic engine damage. This kit provides upper and lower configurations—your choice—with the exact OEM part numbers buyers rely on: Upper LR032347/LR094509 or Lower LR049638/LR094510 (includes integral temperature sensor on lower variant).
Built from reinforced rubber with factory-spec wall thickness, this hose resists degradation, maintains a reliable seal, and integrates seamlessly into your existing cooling system. It's a component that works best when it's forgotten—and that's exactly what you'll get.
What's Included
🔧
Radiator Coolant Hose
Upper or Lower configuration – choose your variant
📋
Installation Guide
Step-by-step fitting instructions & part alignment
✅
OEM Part Numbers
Guaranteed compatibility – see chart below
🛡️
2-Year Warranty
Partsmost aftermarket guarantee coverage
Product Highlights
- Direct OEM-spec replacement – engineered to original fitment tolerances
- Dual upper/lower availability – Upper LR032347/LR094509 or Lower LR049638/LR094510
- Reinforced rubber construction – rated for sustained pressure cycles
- Temperature sensor integration – lower hose includes integral coolant sensor
- 2.0L 16V petrol engines – factory-matched for all covered models
- Premium aftermarket quality – 2-year manufacturer warranty included
- Easy installation – standard hose clamp connections, no custom tooling required
- Fast shipping worldwide – DHL, FedEx, UPS available; UK orders within 3–5 days
- 30-day money-back guarantee – risk-free fit trial with Victorious
- Expert support – chat with our Land Rover cooling specialists
Compatibility Chart
| Vehicle |
Year Range |
Engine |
Variant |
Status |
| Land Rover Freelander 2 (LR2) |
2006–2014 |
2.0L 16V Petrol |
Upper & Lower |
Direct Fit |
| Range Rover Evoque |
2012–2015 |
2.0L 16V Petrol |
Upper & Lower |
Direct Fit |
| Discovery Sport |
2015+ |
2.0L 16V Petrol |
Upper & Lower |
Direct Fit |
| Other engines (diesel, V6, V8) |
Any |
Non-2.0L petrol |
N/A |
Not Compatible |
Note: Verify your OEM part number before ordering. Check your current hose connector or service documentation against the part numbers listed above. If uncertain, contact our team with your VIN—we'll confirm fitment in minutes.
Installation Notes
Difficulty Level: Intermediate | Time: 30–45 Minutes
-
Prepare: Allow engine to cool completely. Drain coolant into a clean catch pan (follow factory procedure for your model year). Disconnect battery negative terminal.
-
Remove old hose: Loosen hose clamps at both ends using a screwdriver. Gently twist and pull to disconnect. If upper hose, disconnect from radiator inlet; if lower, disconnect from radiator outlet and thermostat housing.
-
Inspect connections: Clean connector ports inside radiator and engine block. Check clamp threads for corrosion; replace clamps if damaged.
-
Install new hose: Slide new hose onto both connector ports. Ensure full seating (hose should extend ~½ inch past connector shoulder). Tighten clamps evenly—snug but not over-torqued (typically 15–20 Nm).
-
Refill & bleed: Pour fresh coolant into expansion reservoir to factory level. Start engine, run for 3–5 minutes at idle, then check for leaks around clamps and connections.
-
Final check: Allow engine to cool. Top up coolant if needed. Dispose of used coolant at an approved recycling facility.
⚠ Important: Never work on a hot cooling system. Pressurised coolant can cause serious burns. If your lower hose includes an OEM temperature sensor (models LR049638/LR094510), ensure connector remains dry and secure. Do not force clamps—over-tightening can crack the hose.
Why Victorious?
We specialise in Land Rover cooling system parts, suspension upgrades, and premium protection accessories. Every hose is sourced from trusted manufacturers with proven track records on Freelanders, Evoques, and Discovery Sports across Europe and beyond. Our 30-day money-back guarantee and 4.9-star customer rating reflect our commitment to getting it right the first time.
Ready to Restore Peak Cooling Performance?
Order your 2.0L radiator hose kit today and drive with confidence. Fast shipping, expert support, and a lifetime of hassle-free coolant flow.
Shop Radiator Hoses
Use code 22GET20 for 20% off any 2 items
✓ 12,300+ verified reviews | 4.9★
✓ 30-day money-back guarantee
✓ Worldwide DHL shipping
✓ UK: 3–5 day delivery
✓ +44 203 943 9919 Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Tata Motors. All product names, logos, and brands referenced are the property of their respective owners. This product is designed for compatibility with OEM specifications but is not an original Land Rover part. Installation should be performed by a qualified technician or experienced enthusiast. Always consult your vehicle's service manual and comply with all local safety regulations.