Victorious · Range Rover Evoque · Cooling System
2.2L Diesel Turbo Intercooler Hose to Throttle Body – Range Rover Evoque & Discovery Sport
OEM-spec replacement intercooler pipe with factory clamps for turbocharged diesel engines—direct bolt-on fitment, no modifications.
LR024304
LR066436
2.2L TDV6 Diesel
Turbo Intercooler
Rubber Hose Assembly
Direct Fit
Overview
The 2.2L TDV6 diesel turbocharged engine in your Range Rover Evoque L538 or Discovery Sport demands precision cooling line integration. This OEM-specification intercooler hose assembly connects the turbo charger outlet directly to the throttle body, channelling cooled compressed air into the intake manifold under high boost conditions. Factory clamps ensure zero-slip security and vibration isolation—critical when managing 300+ PSI of pressurised airflow.
This part (OE LR024304 / LR066436) is engineered to original equipment standards. The reinforced rubber compound resists thermal cycling, fuel vapour, and the aggressive temperature swings inherent to turbodiesel operation. OEM fitment means no adapter hunt, no fitment guesswork, no compromise on boost response or combustion efficiency.
Worn or cracked intercooler pipes cause measurable power loss, soot accumulation, and turbo strain. A factory replacement restores full boost delivery, cleaner combustion, and the responsive throttle feedback your diesel engine was designed to deliver. Partsmost quality meets Victorious Automotive standards—proven on thousands of Evoque and Discovery Sport applications worldwide.
What's Included
🔗
Intercooler Hose Assembly
OEM rubber construction, pre-formed geometry
⚙️
Factory Clamp Kit
Two OEM hose clamps (turbo & throttle body ends)
📋
Installation Guide
Fitment notes & torque specifications included
✔️
12-Month Warranty
Full coverage against defects & material failure
Product Highlights
- OEM-spec reinforced rubber compound rated for 300+ PSI boost
- Factory-fitted geometry—zero adapter or rerouting required
- Pre-installed hose clamps for immediate installation
- Direct replacement for OE LR024304 & LR066436
- Thermal-resistant construction withstands turbo heat cycles
- Aftermarket quality matching original equipment performance
- Weighs ~1.36 kg—no added stress on engine bay
- Proven fitment across 2015–2022 Evoque L538 models
- Compatible with all 2.2L TDV6 turbodiesel Discovery Sport variants
- Restores full boost response and combustion efficiency
Compatibility
| Vehicle |
Year Range |
Engine |
Fitment |
| Range Rover Evoque L538 |
2015–2022 |
2.2L TDV6 Diesel |
Direct Fit |
| Land Rover Discovery Sport |
2015–2022 |
2.2L TDV6 Diesel |
Direct Fit |
| Range Rover Evoque L551 (Gen 2) |
2019+ |
2.2L TDV6 |
Not Compatible |
| Range Rover Sport (gasoline) |
All |
Petrol engines |
Not Compatible |
Part Numbers: LR024304 · LR066436
Brand: Partsmost (Aftermarket, OEM-spec)
Origin: Mainland China — quality assured & tested
Installation Notes
Difficulty Level: Intermediate
Requires basic hand tools and engine bay access. Disconnect battery before starting. Budget 45–60 minutes.
- Disconnect the negative battery terminal to disable engine management sensors.
- Remove the top engine cover or air intake assembly to access the intercooler hose connections.
- Locate the turbo charger outlet (upper) and throttle body inlet (lower) connection points.
- Loosen the existing hose clamps using a screwdriver or socket set (typically M10–M12 diameter fittings).
- Carefully slide off the old hose, noting the orientation and any gasket residue at connection points.
- Clean both connection ports with a lint-free cloth; remove any old sealant or debris.
- Position the new hose assembly so the upper end connects to the turbo outlet, lower end to the throttle body inlet.
- Slide both factory clamps over the connection points and hand-tighten them until snug—do not over-torque.
- Using a torque wrench, tighten each clamp to 1.8–2.2 Nm (16–19 lb-ft) for secure, vibration-proof fitment.
- Reinstall the air intake assembly and engine cover in reverse order.
- Reconnect the battery, start the engine, and listen for any hissing (air leaks) or unusual noises for 30 seconds.
- Perform a visual inspection for clamp security; re-check tightness after the first 20 km of driving.
⚠️ Important: Do not operate the engine with a cracked or loose intercooler pipe. Uncontrolled boost leakage can trigger fault codes (P0400, P0403) and reduce combustion efficiency by up to 15%. If you hear persistent hissing after installation, stop the engine immediately and re-inspect clamp tightness.
Ready to Restore Full Boost Performance?
This OEM-spec intercooler hose puts your 2.2L TDV6 diesel back on factory power delivery. No guesswork, no delays. Direct fit, factory clamps, 12-month warranty.
Shop Cooling System Parts
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ verified reviews
🌍 Worldwide shipping via DHL, FedEx, UPS
✓ 30-day money-back guarantee
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or authorised by Jaguar Land Rover Limited, Tata Motors, or any other OEM manufacturer. All product names, logos, and brands are property of their respective owners. This product is designed for the listed vehicles; fitment compatibility is the purchaser's responsibility. We recommend professional installation by a qualified Land Rover technician.
