Productos más vendidos

Nombre de la marca: Liandlee Nombre del modelo: Para Land For Range Para Rover Evoque LRX Lúmenes: 2400Lm Temperatura de color: 12000K Fabricante de automóviles: Land Rover Tipo de haz LED: Línea, Banda. Fabricante de chips LED: Cree Fuente de luz: LED Modelo de coche: K2 Para marcas/modelos de vehículos: Land Rover Potencia: 4 Peso del artículo: 0,5 Tipo de artículo: Iluminación interior Fabricante de chips LED: 321 Modelo de luz de xenón: LEC Nombre: DBS Para Land Para Land Para Range Para Rover / RR Sport  Luz ambiental interior Tuning Atmósfera Luces de banda de fibra óptica Iluminación del panel de la puerta interior (no luz EL) Reinstalación El paquete incluye: 1. Banda de fibra óptica de 4 Uds * 1 metro ( cada una con una fuente de luz ) 2. Instrucciones de instalación ↑ ↑ ↑ Recomendado leer el video de arriba ↑ ↑ ↑ Producto adecuado:  Para rango de Rover RR clásico MK1 1970 ~ 1996 Para rango de Rover RR P38A MK2 1994 ~ 2002 Para rango de Rover RR L322 MK3 2002 ~ 2012 Para rango de Rover RR L405 MK4 2012 ~ 2016 Para gama para Rover RR deporte   Para Land Para Range Para Rover / RR Sport Luz Interior Tuning Atmósfera Banda de fibra óptica Luz ambiental/ Iluminación del Panel Interior de la puerta Tira de luz fría Refit   Descripción     Para Land Para Range Para Rover / RR Sport  Luz Interior Tuning Atmósfera Banda de Fibra Óptica Luz Ambiental / Iluminación del Panel Interior de la Puerta Cool Strip Light Refit     Para Land Para Range Para Rover / RR Sport  Luz Interior Tuning Atmósfera Banda de Fibra Óptica Luz Ambiental / Iluminación del Panel Interior de la Puerta Cool Strip Light Refit     Para Land Para Range Para Rover / RR Sport  Luz Interior Tuning Atmósfera Banda de Fibra Óptica Luz Ambiental / Iluminación del Panel Interior de la Puerta Cool Strip Light Refit   Paquete  

Nombre de la marca: metyoucar Colocación de la etiqueta: interna Compatible con todos los modelos: no. Diseño: dibujos animados Tipo de material: Fibra de carbono Tipo: Vinilo de fibra de carbono 3D Tipo de artículo: pegatinas Embalaje: No empaquetado Longitud del artículo: 20 cm is_customized: Sí Altura del artículo: 10 cm Diámetro del artículo: 0 cm Tipo de pegatina: Otro Categoría: 3D Nombre del modelo: LLK2344 Ancho del artículo: 5 cm País: Reino Unido Marca: Land Rover Color: Fibra de carbono Modelo de montaje: Para Range Rover Evoque 2019-2020 Instalación: La parte trasera con cinta adhesiva para automóviles.

Mejora el aspecto de tu MIINI con estas emblemáticas cubiertas de espejo estilo Union Jack. Los tenemos en una variedad de diferentes opciones de diseño. Agregar individualidad Protege tu espejo de arañazos TPU de alta calidad Diseños emblemáticos para elegir Fácil instalación Cinta adhesiva preaplicada Disponible en tres estilos Conjunto de una pieza Para MINI R55 R56 R60 R61 5,9*3,5 pulgadas

Nombre de la marca: Heinmo's Compatible con todos los modelos: SÍ Material: PU Colocación de pegatinas: kit de suite País: Federación Rusa Marca: MINI Característica 1: Para accesorios Mini Cooper Característica 2: Accesorios para Mini Cooper Montaje 1: Para Mini Countryman F60 Montaje 2: Para Mini F60 Montaje 3: Para Mini Countryman Montaje 4: Para Mini Cooper F60 Montaje 5: Para Mini Cooper F56 Montaje 6: Para Mini F56 Montaje 7: Para Mini Cooper F55 Montaje 8: Para Mini F55 Montaje 9: Para Mini Clubman F54 Montaje 10: Para Mini F54 Montaje 11: Para Mini Cooper F54 Montaje 12: Para Mini Countryman R60 Montaje 13: Para Mini Cooper R56 Montaje 14: Para Mini Cooper R55 Montaje 15: Para Mini Cooper R60 Montaje 16: Para Mini R56 Montaje 17: Para Mini R60 Montaje 18: Para Mini R55 Para Mini Cooper R56 F56 F55 fundas para cinturones de seguridad de coche acolchado para Countryman R60 F60 para Mini Clubman F54 R55 cinturón protector Descripción: Condición: 100% nuevo y de alta calidad Material: cuero de poliuretano Color: Union Jack rojo/cuadros/Union Jack gris Peso: 0,16 kg Cantidad: dos piezas Es fácil de instalar y no tiene instrucciones de instalación. Mueble: Ajuste universal para la mayoría de los coches Mini Cooper. Para Mini Cooper F54 F55 F56 F57 F60. Para Mini Cooper R55 R56 R57 R58 R59 R60 R61. Nota: compruebe que este producto se adapta a su motocicleta antes de realizar el pedido.

Nombre de la marca: sidihaonan Diámetro del artículo: 20 pulgadas Longitud del artículo: 100 pulgadas Certificación de pruebas externas: CCC Año del modelo: 2018-2019 Nombre del modelo: Ranger Rover Material: ABS Peso del artículo: 3 kg Características especiales: DECORAR Modelo de Coche: RANGER ROVER Altura del artículo: 40 pulgadas Tipo de artículo: estilo cromado Ancho del artículo: 25 pulgadas ¡ELIJA CUIDADOSAMENTE LA DISTANCIA ENTRE EJES DE SU COCHE AL SELECCIONAR LA VARIANTE! Accesorios de coche para Land Rover Range Rover, embellecedor de puerta, rejilla cromada plateada, Kit de ventilación de puerta lateral, decoración de embellecedor 2018 2019 Apto para Land Rover 2018-2019.

Tipo: Caja/bolsa de maletero Nombre de marca: tierra roja

Tipo de artículo: Parrillas de carreras Range Rover Sport-Año: 2015,2014 Año del modelo: 2014-2017 Para marcas/modelos de vehículos: Land Rover Modelo Land Rover: Range Rover Sport Descripción del Producto 1. Fácil instalación 2. 100% nuevo 3. Color: Negro 4. Material:ABS 5.Vender en 8 piezas (como se muestra en la primera imagen)   Paquete 1. Cada uno de los artículos tiene embalaje independiente. 2.La bolsa interior de polietileno, la caja exterior de cartón y el embalaje de buena calidad hacen que los productos sean más seguros Métodos de envío 1. Enviamos a todo el mundo. 2. Agregaremos el número de seguimiento en eBay cuando la aduana verifique los artículos. 3. Los artículos se envían dentro de 7 a 15 días hábiles después de la entrega (excepto algunos países)

Tipo de artículo: Parrillas de carreras Tipo de material: ABS Certificación de pruebas externas: CCC Características especiales: agradable Modelo Land Rover: Descubrimiento Nombre de la marca: SVSPS Longitud del artículo: 112 cm Ancho del artículo: 40 cm Para marcas/modelos de vehículos: Land Rover Altura del artículo: 12 cm Peso del artículo: 5 kg Año del modelo: año 2017-2018 ENVÍO AL MUNDO ENTERO PAGO SEGURO GARANTIZADO

Para marcas/modelos de vehículos: Land Rover Características especiales: kit de carrocería Modelo Land Rover: Range Rover Evoque Número de pieza del fabricante: ZDLRRREBK001P Ancho del artículo: 80 cm Colocación en el vehículo: frontal Otro número de pieza: ZDLRRREBK001P Range Rover Evoque-Año: 2015,2014 Número de pieza de intercambio: ZDLRRREBK001P Peso del artículo: 20 KG Tipo de material: PP Altura del artículo: 80 cm Longitud del artículo: 200 cm Kit de carrocería SVO de plástico PP para Land Rover Range Rover Evoque 2014-2017, kit de ajuste de carreras para Range rover Evoque, kit de carrocería reacondicionada Especificación: Marca: ZART Adaptar  Para: Land Rover Range Rover Evoque 2014-2017 Peso: 20 kg Material: PP, PP es el mismo material que los parachoques originales. Artículo en el kit: parachoques delantero y accesorios + parrilla delantera + embellecedor de puerta + parachoques trasero y accesorios como se muestra en las imágenes No dude en contactarnos si desea conocer más detalles. Fotos: ENVÍO AL MUNDO ENTERO PAGO SEGURO GARANTIZADO

Porsche, carcasa para llave remota Porsche Cayenne Boxster 986 987 Panamera Macan Proteja su control remoto Porsche Tipo de material: TPU Nombre de la marca: liser estilo de coche: estilo de coche color: rojo rosa azul negro oro astilla especial: suave ENVÍO AL MUNDO ENTERO PAGO SEGURO GARANTIZADO  

Agregue estas tiras de parachoques al range rover 2018. Son 6 piezas, diseñadas para adaptarse perfectamente a la parrilla de su range rover vogue 2018. Tipo de artículo: Molduras interiores Altura del artículo: 0 pulgadas Nombre de la marca: cheya Ancho del artículo: 0 pulgadas Peso del artículo: 0 kg Nombre del modelo: CY1279 Certificación de pruebas externas: ISO9001 Año: 2018 Tipo de material: ABS Longitud del artículo: 0 pulgadas Color plata ENVÍO AL MUNDO ENTERO PAGO SEGURO GARANTIZADO

Mejora el interior de tu Jaguar E pace con esta fantástica moldura interior  Mejora instantáneamente el aspecto de tu Jaguar Fácil de instalar ABS de corte de precisión de alta calidad. Un juego de 1 piezas Para Jaguar E ritmo-2018-2020 Montaje 1: Para Jaguar XE Montaje 2: Para Jaguar XF Montaje 3: Para Jaguar F-Pace Instalación: La parte trasera con cinta adhesiva para automóviles.

Para Jaguar XE X760 XF X260 f-pace F PACE X761 E-PACE estilo de coche Exterior ABS manija de puerta cromada accesorios de ajuste juego de 8 Uds Mejora el interior de tu Jaguar E pace con esta fantástica moldura interior  Mejora instantáneamente el aspecto de tu Jaguar Fácil de instalar ABS de corte de precisión de alta calidad. Un juego de 1 piezas Para Jaguar XE X760 XF X260 F-Pace F PACE X761 E-PACE

Mejora tu pegatina de labio del alerón trasero del maletero de fibra de carbono para Mercedes Benz Clase C W205 C63 AMG Coupe 2 puertas 2015 - 2017 Para Mercedes-Benz C63 AMG 2017. Básico convertible de 2 puertas Coupé básico de 2 puertas Coupé básico de 2 puertas Para Mercedes-Benz C63 AMG2015 Edición 507 Coupé 2 puertas Coupé básico de 2 puertas Para Mercedes-Benz C63 AMG S 2017. Básico convertible de 2 puertas Coupé básico de 2 puertas Coupé básico de 2 puertas De color negro Material: fibra de carbono Proceso: moldeo al vacío Patrón: tejido de sarga 3X3 Instalación: cinta adhesiva 3M incluida Peso neto: 0,7 kg Peso bruto: 1,8 KG Tamaño del producto: 125*30*4CM Tamaño del embalaje: 160*50*25 CM Embalaje: Caja de poliestireno

Mejora el aspecto de tu interior con esta espectacular moldura interior con inserto envolvente de engranajes de carbono. Fibra de carbón Alta calidad Mejora el interior de tu evoque instalación con cinta adhesiva preaplicada Trabajos en el nuevo evoque 2019 2020.

Parte de nuestras piezas de Paquetes interiores de carbono. Actualice el área del portavasos trasero para Range Rover Velar 2017 - 2020 a esta pieza de Fibra de carbono. Fácil instalación Clip sobre la cubierta climática existente Corte láser perfecto para un ajuste perfecto. Carbohidratos de alta calidad en TPU Consigue el look SVR. Actualice fácilmente el interior de su Range Rover al aspecto de los modelos TOP SVR.

Estas tiras decorativas para Range Rover Velar 2017-2020 añaden algo de brillo al interior de su vehículo. Parte de nuestro paquete interior de piezas. Actualice la zona del altavoz de puerta del Range Rover Velar 2017 - 2020 a esta pieza plateada. Fácil instalación Clip sobre la cubierta de la puerta existente. Corte láser perfecto para un ajuste perfecto. TPU plateado de alta calidad. Consigue el look SVR. Conjunto de cuatro piezas Actualice fácilmente el interior de su Range Rover al aspecto de los modelos TOP SVR. ​

Parte de nuestro paquete interior de piezas. Actualice el área de control del freno de mano del Range Rover Velar 2017 - 2020 a esta pieza con apariencia de metal plateado. Fácil instalación Clip sobre la cubierta climática existente Corte láser perfecto para un ajuste perfecto. TPU plateado de alta calidad. Consigue el look SVR. Actualice fácilmente el interior de su Range Rover al aspecto de los modelos TOP SVR.

Tipo de artículo: Molduras interiores Nombre de la marca: Bosoner Altura del artículo: 0 pulgadas Ancho del artículo: 0 pulgadas Peso del artículo: 0 kg Año: 2012-2018 Tipo de material: fibra de carbono Nombre del modelo: AJLN1009 Longitud del artículo: 0 pulgadas Certificación de pruebas externas: ISO9001 Estilo 1: Accesorios interiores del coche Estilo 2: Calcomanías y pegatinas para automóviles. Diseño: Cambio de color Particularidades: Decoración y protección. Color: fibra de carbono Modelos aplicables: para Land Rover Range Rover Evoque RR 2012-2017 Tamaño: tamaño original del coche

Tipo de artículo: spoilers C180-Año: 2015 Certificación de pruebas externas: CCC Peso del artículo: 1,55 kg Para marcas/modelos de vehículos: Mercedes-Benz Año del modelo: 15-2017 Nombre de la marca: SVSPS Mercedes-Benz Modelo: C180 El paquete incluye : 1 X tapa del alerón del maletero de fibra de carbono Características: -Para MERCEDES para BENZ 2015-17 W205 C63 AMG PS ESTILO ALERÓN DEL TRONCO DE FIBRA DE CARBONO. -Spoiler deportivo estilo PS Highkick Performance. -Hecho de fibra de carbono de alta calidad para un peso ligero y durabilidad. -100% fibra de carbono auténtica de tejido sarga 3K. -Revestimiento transparente resistente a los rayos UV para evitar la decoloración. -Fácil instalación Adhesivo directo, etc. -Agrega instantáneamente un acento de lujo de carbono a su automóvil de lujo. -Mejorará drásticamente la apariencia deportiva de su Clase C W205. -Una gran mejora para su vehículo. -Instrucciones no incluidas, se recomienda encarecidamente la instalación profesional. Especificación: Material: fibra de carbono auténtica Color primario: Fibra de carbono real negra Colocación en el vehículo: trasero Tipo de ajuste: Reemplazo directo Acabado de la superficie: fibra de carbono real con revestimiento UV brillante Método de fijación: adhesivo Otro número de pieza: C180 C200 C300 C400 C63 Sedán de 4 puertas Se adapta a TODOS los siguientes modelos: Compatibilidad: para Mercedes Benz 2015-2017 W205 Clase C y C63 sedán de 4 puertas solamente. Nota: No es compatible con modelos convertibles ni cupé. Nota: -Permita una diferencia de 1-3 mm debido a la medición manual. -Debido a las diferentes pantallas y luces, es posible que la imagen no refleje el color real del artículo. Gracias por su comprensión.

Tipo de artículo: pegatinas Modelo: Otro Nombre de la marca: Bosoner Altura del artículo: 0 pulgadas Tipo: Otro Adhesivo 3D Nombre del modelo: AJLM1107 Diámetro del artículo: 0 pulgadas is_customized: Sí Longitud del artículo: 0 pulgadas Tipo de pegatina: Otro Categoría: 3D Colocación de la etiqueta: interna Tipo de material: Abdominales Ancho del artículo: 0 pulgadas Diseño: Cambio de color Embalaje: No empaquetado Características: Decoración y protección Estilo: Calcomanías y pegatinas para autos. Diseño: Cambio de color Tamaño: tamaño original del coche Modelos aplicables 1: para Jaguar F-Pace f pace X761 2016 2017 2018 Modelos aplicables 2: para Jaguar XE X760 2015 2016 2017 2018 Modelos aplicables 3: para Jaguar XF X260 2016 2017 2018

Añade un poco de brillo a tu Range Rover Vogue o Sport con estos adornos brillantes estilo Swarovski Añade individualidad a tu Range Rover Hecho de materiales de alta calidad. Diamantes estilo cromo y swarvoksi. Disponible en plata u oro Conjunto de una pieza instalación con grifo preaplicado Instalar en menos de 2 minutos.

Victorious · Defender L663 · Exterior Real Carbon Fibre Front Bumper Grille Covers – Defender 90 / 110 / 130 Authentic carbon fibre grille panels that elevate your Defender's front-end aesthetic with precision engineering and uncompromising quality. L663 2020–2026 Real Carbon Fibre Direct Fit 90 / 110 / 130 Overview The modern Defender 90, 110, and 130 (L663) have redefined what a working 4x4 can be. With their bold, purposeful grille design, they command presence on any terrain. These Real Carbon Fibre Front Bumper Grille Covers are engineered to amplify that statement—replacing the standard plastic inserts with authentic woven carbon, instantly sharpening your Defender's stance. Machined from premium real carbon fibre composite, these covers slot directly into your existing bumper grille openings without modification. They're lightweight, UV-resistant, and finished to automotive standards. No drilling. No brackets. Just precision engineering that transforms your Defender's front end into something unmistakably premium. Whether you're speccing a 90 for weekend adventures or a 110 for serious expedition work, these grille covers signal that your Defender has been properly sorted. They're the kind of detail that catches light, catches eyes, and tells a story about the owner's commitment to craftsmanship. What's Included 📦 Real Carbon Fibre Grille Covers Complete set for your model 📋 Installation Guide Clear, step-by-step instructions 🛡️ Mounting Hardware All clips and fixings included ✅ 30-Day Money-Back Guarantee Backed by Victorious Automotive Product Highlights Authentic woven carbon fibre construction Direct fit – no drilling or fabrication required Lightweight and structurally rigid UV-resistant finish for long-term durability Compatible with Defender 90, 110, and 130 L663 Precision-engineered for factory-quality tolerances Enhances front-end presence and kerb appeal Easy installation in under 30 minutes Maintains OEM grille proportions and symmetry Backed by Victorious 30-day guarantee Compatibility Model Year Range Compatibility Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2020–2026 Direct Fit Defender 110 Heritage (classic) 2014–2016 Not Compatible Range Rover Sport / Velar All years Not Compatible Installation Difficulty Level: Beginner | Time: 20–30 minutes Prepare: Ensure your Defender is on level ground and engine is cool. Gather the included mounting hardware and grille covers. Inspect Fitment: Dry-fit each carbon cover against the corresponding grille opening to verify alignment and snap-fit tolerances. Clean Surfaces: Wipe down the grille frame and contact points with a microfibre cloth to remove dust and debris. Install Clips: Attach the provided mounting clips to the rear edge of each carbon cover, ensuring they're flush and secure. Position Covers: Carefully guide each cover into its opening, starting from the top. Press firmly until clips engage and you hear/feel a click. Verify Alignment: Check that all covers sit flush with the bumper frame and are symmetrical. Make micro-adjustments as needed. Final Check: Step back and inspect the overall appearance. Test light pressure on each cover to confirm they're locked in place. Note: These are direct-fit components. If your Defender has an aftermarket bumper or non-standard grille frame, test-fit before committing. Contact us at +44 203 943 9919 if you need clarification on compatibility. Ready to Elevate Your Defender? Real carbon fibre grille covers are the finishing touch that transforms a standard Defender into a properly sorted, thoughtfully specified machine. Order now and experience the difference premium materials make. Shop Defender Upgrades Use code 22GET20 for 20% off when you buy any 2 items. 4.9/5 stars · 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee ☎ +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover Limited. All product names, logos, and vehicle designations are trademarks of their respective owners used solely for identification and compatibility purposes.

Victorious · Defender L663 · Exterior Real Carbon Fibre Taillight Protection Panel – Defender 90/110/130 OEM-style carbon fibre protection for your Defender's rear lights, engineered for direct fit and lasting durability. Defender 90/110/130 2020–2025 Real Carbon Fibre Direct Fit ISO9001 Certified Easy Install Overview The new Defender 90, 110, and 130 (2020–2025) have set a benchmark for modern utility design. Yet the rear lights remain one of the most vulnerable areas during off-road work and everyday wear. This Real Carbon Fibre Taillight Protection Panel adds both structural safeguard and a purposeful, refined aesthetic that complements your Defender's contemporary lines. Constructed from genuine woven carbon fibre, this panel delivers authentic material quality and visual depth you won't find in plastic alternatives. Whether you're navigating tight trails or highway driving, the panel shields your light assemblies from stone chips, debris, and minor impact—while maintaining perfect optical clarity for safe operation. Pre-fitted with premium automotive-grade adhesive, installation takes under 10 minutes and requires no drilling, cutting, or permanent modification to your vehicle. Every panel is ISO9001 certified and undergoes rigorous quality control before shipment worldwide. What's Included ⬚ Real Carbon Fibre Panel Genuine woven material, genuine weight 🧴 Pre-Applied Adhesive Premium automotive-grade, repositionable 📋 Installation Guide Step-by-step instructions in 5 languages ✓ Quality Guarantee 30-day money-back guarantee, 12-month warranty Product Highlights Genuine 3K twill-weave carbon fibre construction Protects OEM taillight assembly from stone chips and debris Direct fit – no cutting, drilling, or modification required ISO9001 certified manufacturing facility Pre-applied premium automotive adhesive Clear optical properties – no light obstruction Lightweight – adds negligible weight penalty Fits Defender 90, 110, and 130 models (2020–2025) Easy repositioning during first install (72-hour cure) Backed by Victorious 30-day money-back guarantee Compatibility Model Year Range Fit Status Defender 90 2020–2025 Direct Fit Defender 110 2020–2025 Direct Fit Defender 130 2020–2025 Direct Fit Defender 90 (2004–2016) Pre-2020 Not Compatible Range Rover / Sport / Evoque All years Not Compatible Note: Please confirm your vehicle's build year and taillight design before purchase. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure about fit. Installation Difficulty Level: Beginner | Time Required: 10 Minutes Prepare the surface. Clean the taillight area thoroughly with soap and water. Dry completely with a clean cloth or compressed air. Remove any residue, wax, or protective film. Test fit first. Position the carbon fibre panel over the taillight without removing the backing. Ensure alignment and centering. Adjust if needed before committing adhesive. Apply the panel. Carefully peel back a small corner of the adhesive backing. Press the panel into position, then gradually remove the rest of the backing while pressing firmly. Press firmly for 2+ minutes. Apply sustained pressure across the entire panel, especially along the edges. Use a squeegee or plastic card if available to eliminate air pockets. Allow full cure before exposure. Do not wash, touch, or expose to water for a minimum of 72 hours. If weather is cold, gently apply heat from a hair dryer to aid adhesive flow. Final inspection. After 72 hours, inspect the edges and seams. The panel should sit flush and show no lifting or gaps. ⚠ Important: The adhesive requires 72 hours to fully set in normal conditions (15–25°C). Exposure to water, humidity, or cold temperatures during this period may compromise bonding. If installation occurs in wet or cold weather, extend cure time to 120 hours and use gentle heat to accelerate resin flow. Ready to Protect Your Defender? Genuine carbon fibre meets precision engineering. This taillight panel isn't just a cosmetic upgrade—it's an investment in long-term protection and authentic material quality. Shop All Defender Exterior Upgrades Add 2 items and save 20% instantly: Code: 22GET20 4.9 / 5 Stars 12,300+ verified reviews 30-Day Money Back No questions asked Worldwide Shipping DHL, FedEx, UPS, TNT UK Support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any official Land Rover entity. All vehicle names and brands are the property of their respective manufacturers. Product fitment and compatibility are provided as a guide; buyers are responsible for confirming fit with their vehicle before purchase.

Victorious · Defender L663 · Exterior Styling Fog Lamp Cover For Land Rover Defender 90, 110, 130 Premium ABS rear fog light covers with integrated styling and seamless installation via dual-adhesive backing. Defender L663 2020–2025 ABS Material Matte Black Direct Fit No Drilling Overview If you own a Defender 90, 110, or 130 from 2020 onwards, you know that subtle exterior refinements make all the difference. The factory fog lamp surrounds are functional but uninspired. These premium ABS rear fog lamp covers deliver a purposeful, modern aesthetic—reshaping the rear end profile with a sleek matte-black finish that reads intentional and cohesive. Engineered from high-grade ABS plastic, these covers are injection-molded for precise fitment and dimensional accuracy. The matte finish resists gloss fade and minor scratching better than painted alternatives, while the dual-adhesive backing eliminates the need for fasteners, clips, or drilling. Installation takes minutes and leaves zero permanent modification to your Defender. Whether you're building a stealth aesthetic or simply upgrading from basic plastic trim, these fog lamp covers integrate seamlessly with modern and classic Defender styling packages. Tried-and-tested by thousands of L663 owners, they've been exported globally and manufactured to ISO 9001 standards—the same benchmark used across the automotive accessory industry. What's Included 🛡️ ABS Rear Fog Lamp Covers (Pair) Matte black finish, precision-molded 🔗 3M Dual-Adhesive Backing Pre-applied and ready to install 📋 Installation Guide Step-by-step fitment instructions ✅ QC Certified 100% brand new, inspected before shipment Product Highlights Premium ABS material – UV-resistant, scratch-resistant matte finish Direct fit for Defender 90, 110, 130 (2020–2025) No drilling, no fasteners, no modifications required 3M dual-adhesive backing for permanent, clean installation ISO 9001 manufactured – global automotive standard Precision injection-molded for exact fitment Lightweight and integrated design Enhances rear end aesthetic and visual cohesion Easy cleaning and maintenance 30-day money-back guarantee from Victorious Compatibility Defender Model Year Range Fitment Defender 90 (L663) 2020–2025 Direct Fit Defender 110 (L663) 2020–2025 Direct Fit Defender 130 (L663) 2020–2025 Direct Fit Defender (2004–2016) Pre-2020 Not Compatible Installation Difficulty: Beginner | Time: 5–10 Minutes Prepare the surface: Clean the rear fog lamp surround area thoroughly with soap and water. Ensure no dust, dirt, or residue remains. Dry completely with a microfiber cloth. Inspect fitment: Lay the covers in place (without adhesive) to verify alignment and gap consistency on both sides. Remove adhesive backing: Slowly peel away the 3M backing paper, exposing the adhesive strip. Apply with pressure: Press the cover firmly onto the fuel door, working from the center outward to eliminate air pockets. Apply steady pressure for 30 seconds per cover. Cure time: Wait a minimum of 48 hours before washing your Defender or exposing the covers to water or high humidity. This allows the adhesive to fully bond. Important: Do not wash your Defender for at least 48 hours after installation. Premature water exposure may compromise adhesive bond strength. Ready to Elevate Your Defender's Rear End? These fog lamp covers are a no-fuss, high-impact upgrade that transforms the rear aesthetic of your L663 in under 10 minutes. Premium materials, precision engineering, and a 30-day guarantee—everything you expect from Victorious. Shop Defender Upgrades Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) ✅ 30-day money-back guarantee Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Land Rover, or any JLR entity. All vehicle names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory and is designed for fitment compatibility only. ```

Victorious · Defender L663 · Exterior Protection Rear Brake Light Protective Net Cover – Defender 90 & 110 Premium ABS protection for your tail lights. Guard against impacts, dust, and debris with a direct-fit glossy black finish. Defender 90 L663 Defender 110 L663 2020–2025 Glossy Black ABS Polymer Direct Fit Why Your Defender Needs Rear Light Protection Your Land Rover Defender 90 and 110 spend their lives working—whether towing, off-road touring, or daily drive. Your rear brake lights face constant exposure: flying stones, mud spray, towing contact, and UV degradation. This protective net cover shields those expensive OEM lights while maintaining stock aesthetics. These glossy black ABS guards are engineered for durability and form-fitted for your 2020–2025 Defender L663. They arrive pre-assembled and ready for installation with adhesive backing. No cutting, no drilling, no permanent modifications to your vehicle. Victorious sources only ISO 9001–certified components. Each cover undergoes quality inspection before dispatch, and we back every order with a 30-day money-back guarantee. Built for owners who treat their Defenders as companions, not commodities. What's Included 🛡️ Rear Light Cover Set One pair, glossy black ABS. Left & right fitted. 🔧 Installation Hardware Pre-assembled. Double-sided adhesive tape backing. 📦 Retail Packaging Arrives safely boxed. Import-ready for resale. 📋 Fitment Guide Vehicle-specific installation notes included. Product Highlights Direct fit for Defender 90 & 110 (L663, 2020–2025) Premium ISO 9001–certified ABS construction Glossy black finish matches modern Defender aesthetics Protective mesh guards against impact and debris Pre-installed double-sided adhesive tape No drilling or permanent modifications required UV-resistant polymer compound Factory-sealed and ready to install Lightweight (minimal vehicle impact) Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Code Years Fitment Defender 90 L663 2020–2025 Direct Fit Defender 110 L663 2020–2025 Direct Fit Defender 130 L663 2021–2025 Check Fitment Classic Defender Pre-2020 2004–2016 Not Compatible Installation Guide Difficulty: Beginner | Time: 15–20 minutes Clean the surface: Wipe the rear light housing and surrounding body panel with a lint-free cloth. Use isopropyl alcohol to remove any dust, grease, or residue. Position the cover: Dry-fit the protective net cover to your rear light. Ensure alignment with the light perimeter and body contours. Peel and apply: Remove the backing from the double-sided adhesive tape. Press firmly onto the light housing, working from top to bottom to avoid air pockets. Cure time: Allow 24 hours for the adhesive to cure fully before washing or driving aggressively. Inspect: Check all edges for secure contact. If any area lifts, re-press and allow additional cure time. ⚠️ Fitment Check: Before installation, verify that the cover matches the contour of your specific Defender model (90 vs. 110). Consult the provided fitment guide or contact us at +44 203 943 9919 if unsure. Ready to Protect Your Defender's Tail Lights? Order now and secure your rear light covers with Victorious Automotive's industry-leading guarantee. Free worldwide shipping on orders over £50. Use code 22GET20 for 20% off when you buy any 2 items. Shop Defender Accessories 30-Day Money BackNo questions asked Worldwide ShippingDHL, FedEx, UPS, TNT 4.9★ Rating12,300+ verified reviews Expert Support+44 203 943 9919 Victorious Automotive is an independent aftermarket parts supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All trademarks and vehicle names are property of their respective owners. Product specifications subject to change without notice. Always verify fitment with your vehicle's build and year before purchase.

Victorious · Defender L663 · Lighting 2026 Style LED Tail Lights for Defender L663 Modern LED rear lighting with integrated brake, turn signal, and reverse functions for your Defender. L663 2020–2026 LED Technology OEM-Style Fitment Plug-and-Play Overview The Defender L663 is built for serious terrain and serious style. Your rear lighting should match that capability—and these LED tail lamps deliver the performance and modern aesthetic your Defender deserves. Engineered with premium LED technology, these tail lights offer superior luminous intensity, faster response times, and reliability that outlasts traditional halogen assemblies. The integrated design combines brake light, high-mounted stop light, turn signals, and reverse light into one cohesive unit—keeping your Defender looking contemporary while improving visibility and safety on and off the road. Built to withstand vibration, shock, and the extremes of adventure. Maintenance-free, low-energy consumption, and engineered for longevity. This is how modern Defender lighting should work. What's Included 💡 LED Tail Light Assembly (Pair) 2026 new design, direct fitment L663 🔧 Mounting Hardware Stainless fasteners, gaskets included 📋 Installation Guide Step-by-step with wiring diagram ✓ Lifetime Support Contact our team via +44 203 943 9919 Key Features Premium LED light source with optimised intensity distribution Integrated brake, turn signal, reverse, and high-mount stop light Rapid illumination rise—millisecond response time Extended service life—maintenance-free operation Low energy consumption vs. traditional halogen High durability switch mechanism rated for 100,000+ cycles Exceptional vibration and shock resistance Weather-sealed design with gasket protection 2026 contemporary styling for modern Defender aesthetic Direct OEM-style fitment—no modification required Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender L663 2020–2026 Direct Fit Land Rover Defender 110 2020–2026 Direct Fit Land Rover Defender 90 2020–2026 Direct Fit Land Rover Defender 130 2020–2026 Direct Fit Range Rover Sport L461 / L494 Any Not Compatible Range Rover Vogue L460 / L405 Any Not Compatible Installation Difficulty: Intermediate | Time: 45–60 minutes Disconnect the vehicle battery at the negative terminal. Remove existing tail light assembly by unscrewing mounting bolts (typically 4–6 bolts per side). Disconnect the wiring harness from the OEM assembly. Note connector positions for reference. Connect the new LED assembly harness to the vehicle connectors. Match colour-coded wires: red (brake/stop), amber (turn), white (reverse), black (ground). Align the new assembly with the mounting bracket and secure with provided stainless hardware. Check gasket seating to prevent water ingress. Apply silicone sealant around the perimeter if needed. Reconnect the battery and test all light functions (brake, turn, reverse, high-mount stop) before closing the tailgate. Allow any applied sealant 24 hours to cure before off-road use. ⚠ Important: Do not force connectors. If resistance is felt, verify connector alignment. Incorrect wiring may damage the LED module or vehicle electronics. When in doubt, consult a qualified Land Rover technician or contact our team. Upgrade Your Defender Lighting Today Modern technology, purpose-built reliability, and a look that matches your Defender's attitude. These LED tail lights transform your rear end into a beacon of contemporary style and safety. Shop Defender L663 Lighting Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Phone support +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective owners. Product specifications subject to change without notice. Always verify fitment with your vehicle VIN before purchase. ```

Victorious · Defender L663 · Wheels & Tyres 20" Forged Alloy Wheel 9J – Defender L663 Premium forged construction with precision 5×120 PCD fitment. Lightweight, responsive handling, and a refined finish designed for the modern Defender. Defender L663 2020–2026 Forged Alloy 20" Diameter 9J Width PCD 5×120 ET38 Offset CB 72.6mm Overview The New Land Rover Defender L663 (2020–2026) demands wheels that balance rugged capability with contemporary design. This 20-inch forged alloy wheel delivers both—engineered with a centre bore of 72.6mm and a precise ET38 offset that sits flush with your Defender's geometry. Forged construction means greater strength-to-weight ratio than cast alternatives. Your wheel absorbs impacts better, transfers steering inputs more directly, and reduces unsprung mass for improved suspension response and fuel efficiency. The 9J width provides a confident stance while maintaining clearance for brake systems and suspension articulation. Ideal for owners who refuse to compromise between aesthetics and function, these wheels transform your Defender's appearance whilst genuinely improving how it drives—smoother ride quality, sharper turn-in, and reduced tyre wear over time. What's Included ⚙️ Forged Alloy Wheel 20" × 9J, precision-cast 🔩 Mounting Hardware Stainless steel lug bolts 📋 Fitment Guide Technical specs & torque values 🛡️ Victorious Guarantee 30-day money-back promise Product Highlights Forged alloy construction for superior strength and reduced weight 5×120 PCD fitment matches Defender L663 bolt pattern exactly ET38 offset maintains correct track geometry and brake clearance 72.6mm centre bore ensures zero vibration and perfect centering 20-inch diameter fits standard Defender tyre profiles without modification 9J width provides aggressive stance without rubbing or clearance issues Lightweight design improves acceleration, braking, and fuel economy Enhanced steering response and handling precision on and off-road Modern aesthetic complements Defender's contemporary design language Backed by Victorious 30-day money-back guarantee and expert support Compatibility Vehicle Model Years Code Fitment Land Rover Defender 2020–2026 L663 Direct Fit Land Rover Defender 2004–2016 Pre-L663 Not Compatible Range Rover Sport All Years L494/L461 Not Compatible Range Rover Vogue All Years L405/L460 Not Compatible Installation Notes Difficulty Level: Moderate | Time: 45–60 minutes (per wheel) Secure your Defender on level ground using axle stands and wheel chocks Remove the existing wheel using a cross-pattern loosening technique Clean the hub face and inspect the brake system for wear Position the new forged wheel, ensuring the centre bore aligns with the hub Install lug bolts by hand first, then tighten in a star pattern to 110 Nm Double-check all bolts after 10 minutes of light driving Perform a visual wheel alignment and balance check at a trusted tyre specialist Important: Wheel fitment on the Defender L663 requires precision. If you're unsure about centre bore clearance or offset compatibility, consult a Land Rover specialist before installation. Incorrect fitment can affect braking performance and suspension geometry. Ready to Upgrade Your Defender? These forged 20-inch wheels aren't just a visual refresh—they're a genuine performance upgrade that transforms how your L663 handles, accelerates, and brakes. Precision engineering. Responsive driving. Timeless design. Shop Defender Wheels Use code 22GET20 to get 20% off any 2 items from our Defender collection. ✓ 4.9★ Rated – 12,300+ Reviews ✓ 30-Day Guarantee – Money Back ✓ Worldwide Shipping – DHL, FedEx, UPS ✓ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names and vehicle codes are used for identification purposes only. Always verify fitment with technical specifications before purchase.

Victorious · Defender L663 · Exterior Air Intake Grille for Defender 90 & 110 (2020–2026) Premium aluminium insect mesh screen keeps debris and flying insects out of your engine bay while maintaining clean aesthetics. Defender L663 2020–2026 Aluminium Alloy Black Finish Insect Proof Anti-Blocking Overview The 2020-onwards Defender 90 and 110 are serious workhorses, designed to tackle any terrain. Whether you're navigating country lanes or exploring more remote environments, engine protection matters—and this air intake grille is engineered exactly for that. This aftermarket air intake mesh is machined from high-grade aluminium alloy in a satin black finish that complements modern Defender aesthetics. Its fine mesh construction blocks insects, debris, and road spray from entering your engine's intake while maintaining optimal airflow. No performance compromise, no weight penalty—just straightforward protection. Installation is straightforward, taking 15–20 minutes without tools. Whether you're a weekend adventurer or daily commuter, this upgrade pays for itself in peace of mind. What's Included 📦 Air Intake Grille Aluminium alloy, black finish 🔧 Installation Guide Step-by-step instructions included ✓ Factory Tested ISO9001 certified manufacturing Product Highlights High-grade aluminium alloy construction for durability and corrosion resistance Fine mesh design blocks insects and debris without restricting airflow Satin black finish integrates seamlessly with modern Defender design Direct-fit design—no modifications required to your vehicle Tool-free installation in under 20 minutes Anti-blocking mesh prevents clogging during off-road use Lightweight—no impact on fuel economy or performance ISO9001 certified manufacturing and quality control Protects engine bay during towing, dust storms, and highway driving Covers both Defender 90 and 110 models seamlessly Compatibility Vehicle Model Year Range Compatibility Land Rover Defender 90 2020–2026 Direct Fit Land Rover Defender 110 2020–2026 Direct Fit Land Rover Defender 130 2020–2026 Direct Fit Defender 90 (Pre-2020) –2019 Not Compatible Defender 110 (Pre-2020) –2019 Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Open your bonnet and locate the air intake area on your Defender's front fender. Align the air intake grille mesh with your vehicle's existing intake port. Secure the grille using the provided clips or adhesive backing (method depends on your model year). Press firmly to ensure a seated fit and allow adhesive to set for 24 hours if applicable. Close your bonnet and verify the grille is secure. No further adjustments needed. Note: Always ensure your engine is cool before installation. If you're uncomfortable with any step, contact our support team at +44 203 943 9919. Ready to Protect Your Defender? Shop with Confidence Over 12,300 verified five-star reviews from Land Rover and Defender owners. 30-day money-back guarantee on every order. Worldwide shipping via DHL, FedEx, UPS, and TNT. Shop Defender Accessories Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars ✓ 12,300+ Reviews ✓ 30-Day Guarantee ✓ Worldwide Shipping Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names and trademarks are the property of their respective owners. This product is designed as an aftermarket enhancement and does not constitute a factory modification. Always verify compatibility with your specific vehicle before purchase. ```