Nuevos productos

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Trim Land Rover Discovery 4 LR4 ABS Carbon Fibre GPS Screen Panel Cover Trim Sticker Instantly elevate your Discovery 4's centre console with a precision-cut carbon fibre-style GPS screen panel cover — no drilling, no mess, no compromise. Discovery 4 LR4 2010–2016 ABS Plastic Carbon Fibre Style GPS Screen Trim Interior Upgrade No-Drill Fit OEM Panel Coverage Overview The Land Rover Discovery 4 LR4, produced from 2010 through to 2016, remains one of the most capable and characterful SUVs ever built. Its interior, while functional and purposeful, benefits enormously from subtle refinements — particularly around the central dashboard where the GPS navigation screen sits as a focal point of daily interaction. This ABS carbon fibre-style GPS screen panel cover trim sticker is designed to sit flush over the factory surround, transforming a dated or worn panel into something that looks genuinely considered. Available in Carbon Fibre, Black, Black Wood Grain, and Silver finishes, each piece is precisely shaped to match the OEM panel geometry of the Discovery 4 exactly — no gaps, no misalignment, no guesswork. Constructed from high-grade ABS plastic with a UV-stable surface coating, this trim is built to withstand the temperature swings and daily wear of a working interior. The pre-applied 3M-grade double-sided adhesive backing ensures a secure, long-lasting bond without damaging the underlying factory panel — ideal for those who want a premium result without committing to permanent modifications. What's Included 🧩 GPS Screen Panel Cover 1 × precision-cut ABS trim sticker for the navigation screen surround 🔧 Pre-Applied Adhesive 3M-grade double-sided tape bonded to the reverse for secure fitment 🧼 Cleaning Wipe Alcohol prep wipe included for surface preparation prior to installation 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Precision-cut to match the Discovery 4 LR4 GPS screen panel exactly Premium ABS plastic with UV-resistant surface finish Available in Carbon Fibre, Black, Black Wood Grain, and Silver Pre-applied 3M-grade adhesive for a clean, no-drill installation Protects the factory panel from scratches, wear, and UV fading Seamless OEM-style finish — looks factory-fitted when installed Fully reversible — leaves no damage to the original surface Resistant to interior temperature fluctuations and humidity Lightweight construction — no effect on panel weight or function Compatible with all trim levels of the Discovery 4 (2010–2016) Compatibility Vehicle Code Years Fitment Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 4 SE LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 4 HSE LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty: ★☆☆☆☆ Easy  |  Estimated Time: 10–20 Minutes  |  Tools Required: None Ensure the vehicle interior is at room temperature. Avoid fitting in cold or excessively hot conditions, as this can affect adhesive performance. Use the included alcohol prep wipe to thoroughly clean the factory GPS screen panel surround. Remove all dust, oils, and fingerprints. Allow to dry completely for at least 60 seconds. Test-fit the trim cover over the panel without removing the adhesive backing — confirm alignment and orientation before committing. Peel back a small section of the adhesive liner and align the cover carefully to one edge of the panel. Work across the panel gradually, pressing firmly as you go to avoid air bubbles. Once fully positioned, apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours for the adhesive to fully cure before cleaning the surface or exposing the panel to extreme temperatures. ⚠ Note: Do not apply to a dirty, greasy, or recently polished surface. Ensure all panel dressing or conditioner residue has been removed prior to fitting. If in doubt, use an additional isopropyl alcohol wipe before installation. Built for Discovery 4 Owners Who Demand More Every detail inside your Discovery 4 tells a story. Make it the right one. Browse our full range of Discovery 4 interior upgrades at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Dashboard AC Vent Socket Frame Trim Stickers — Land Rover Discovery 4 LR4 & Range Rover Sport (2010–2013) Precision-fit ABS trim stickers that refresh the AC vent socket frames across your Discovery 4 or Range Rover Sport dashboard — a clean, cost-effective interior upgrade with zero modification required. Discovery 4 LR4 Range Rover Sport L320 2010–2013 ABS Plastic Dashboard Trim AC Vent Frame No Modifications Clip-Fit Interior Upgrade Overview The Discovery 4 LR4 and second-generation Range Rover Sport (L320) both share an interior architecture that — while purposeful and robust — can begin to look worn around the AC vent socket frames over time. Fading, discolouration, and surface scuffs around these high-contact areas are among the first signs of a cabin that's seen real use. These trim stickers address exactly that, giving your dashboard a sharper, more intentional finish without the cost or complexity of full panel replacement. Manufactured from durable ABS plastic, each piece in this set is engineered to follow the exact contour of the OEM AC vent socket surrounds on 2010–2013 Discovery 4 and Range Rover Sport models. The fitment is precise — these aren't generic overlays. They're cut and formed to match the factory profile, which means the result looks like it belongs there, because dimensionally it does. For owners who take pride in maintaining a clean, well-presented interior, this is one of the most straightforward upgrades available. No drilling, no adhesive mess, no irreversible changes — just a refined finish that brings the dashboard back in line with how the rest of your vehicle presents itself. What's Included 🎛️ AC Vent Socket Frame Trim Set Full set of ABS dashboard vent surround stickers 📦 Protective Packaging Safely packed to prevent transit damage Product Highlights Precision-engineered to fit 2010–2013 Discovery 4 LR4 and Range Rover Sport (L320) AC vent socket frames Durable ABS plastic construction — resistant to heat, humidity, and everyday cabin wear Clip or adhesive-backed fitment — no drilling, cutting, or permanent modifications required Restores a clean, factory-fresh appearance to worn or discoloured vent surrounds Low-profile design sits flush with existing trim panels for a seamless OEM-style look Finished surface resists fingerprints and surface scuffs during daily use Colour and finish matched as shown in product imagery — consistent across the full set Lightweight construction adds no perceptible weight to the dashboard assembly Reversible upgrade — can be removed without damaging the underlying factory trim Pairs well with other Discovery 4 and Range Rover Sport interior trim upgrades Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 LR4 / L319 2010–2013 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery 3 L319 Early 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Ensure the dashboard surface and existing AC vent socket frames are clean and free from dust, grease, or residue. A microfibre cloth and a small amount of interior cleaner work well for this step. Dry fit each trim piece against its corresponding vent surround to confirm the alignment and profile match before committing to final installation. If the trim uses an adhesive backing, peel the protective liner carefully and position the piece accurately before pressing down — adhesive-backed trims are difficult to reposition once contact is made. Apply firm, even pressure across the full surface of each trim for 30–60 seconds to ensure a secure bond or clip engagement. Allow any adhesive-backed pieces to cure at room temperature for a minimum of 1 hour before exposing the vehicle to extremes of heat or cold. Step back and inspect the full set once installed — the result should sit flush with no visible gaps or lifting edges. Note: If you are unsure about any stage of the installation process, we recommend seeking assistance from a professional vehicle interior technician. Installation instructions are not included with this product. Always verify your specific vehicle variant against the compatibility table above before ordering. Explore the Full Discovery 4 Interior Range This trim set is just one part of a wider collection of precision-fit interior accessories for the Land Rover Discovery 4 LR4. Browse the full range at Victorious Automotive and build a cabin that reflects how seriously you take your vehicle. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always confirm compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Aluminum Alloy Center Console Mode Adjustment Button Trim for Land Rover Discovery 4 (2014–2016) Precision-machined aluminum alloy button trim that elevates the Discovery 4 center console with a refined, factory-premium finish — without a trip to the dealership. Discovery 4 2014–2016 Aluminum Alloy Center Console Mode Button Trim Interior Upgrade Silver Finish Direct Fit Overview The Land Rover Discovery 4 is one of the most capable and characterful SUVs ever produced — a vehicle that owners genuinely form a bond with. But years of daily use can leave the center console looking worn, particularly around the mode adjustment buttons where fingertip contact is constant. It's a small detail, but one that experienced Discovery owners notice immediately. These aluminum alloy mode adjustment button trim pieces are machined to match the exact geometry of the 2014–2016 Discovery 4 center console. Rather than the plastic finish that comes from the factory, you're replacing it with brushed aluminum alloy — a material choice that reads as a factory-grade upgrade rather than an aftermarket addition. The silver tone integrates naturally with the existing chrome and satin accents already present in the D4 interior. Beyond aesthetics, the alloy construction provides meaningful protection for the underlying switch housing. It resists scratching, doesn't fade, and won't show the fingerprint wear that plagues the factory trim over time. If you're refreshing a high-mileage interior or simply want your Discovery 4 to feel as composed on the inside as it performs on the outside, this is one of the most cost-effective upgrades available. What's Included 🔲 Button Trim Set Center console mode adjustment aluminum alloy surround, full set 🔧 Adhesive Backing Pre-applied fitment adhesive for secure, tool-free installation 📦 Protective Packaging Individually wrapped to prevent surface marking in transit Product Highlights Precision-machined aluminum alloy construction for genuine durability Brushed silver finish complements the Discovery 4 factory interior palette Custom-profiled to align perfectly with existing mode adjustment buttons Resists scratching, fading, and fingerprint wear over long-term use Pre-applied adhesive for a clean, tool-free installation process Adds a premium, factory-upgrade aesthetic without modification Protects underlying switch housing from further cosmetic wear Lightweight alloy construction — no impact on button tactile feel Reversible fit — can be removed cleanly without damaging trim panels Verified fitment for 2014, 2015, and 2016 Discovery 4 variants Compatibility Vehicle Year Range Variant Fitment Land Rover Discovery 4 2014–2016 All trim levels (SE, HSE, HSE Luxury) Direct Fit Land Rover Discovery 4 2009–2013 Pre-facelift models Verify Before Purchase Land Rover Discovery 3 2004–2009 All variants Not Compatible Land Rover Discovery 5 2017–2024 All variants Not Compatible Range Rover Sport L494 2013–2020 All variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Ensure the center console surface is clean and free of dust, grease, or residue. Use an isopropyl alcohol wipe and allow to dry fully before proceeding. Test-fit the trim piece over the mode adjustment button area without removing the adhesive backing to confirm correct orientation and alignment. Peel the adhesive backing carefully, taking care not to touch the adhesive surface with your fingers. Starting from one edge, press the trim firmly into position, applying consistent pressure across the full surface for 30–60 seconds to ensure full adhesion. Allow a minimum of 1 hour before regular use to allow the adhesive to cure fully and bond securely to the console surface. ⚠ Note: Ensure the console surface temperature is above 15°C (59°F) during installation for optimal adhesive performance. Avoid applying in direct sunlight or high humidity conditions. Do not attempt removal within the first 24 hours after fitting. Complete Your Discovery 4 Interior Browse our full range of Land Rover Discovery 4 interior accessories — from dashboard trim to gear surround finishers — each chosen to complement the character of your vehicle. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Land Rover Discovery 4 · Interior Styling ABS Black Rear Reading Light Frame Sticker — Land Rover Discovery 4 LR4 (2010–2016) A precision-cut ABS black trim frame that refreshes the rear reading light surround on your Discovery 4 LR4, delivering a clean, factory-consistent aesthetic with zero permanent modification. Discovery 4 / LR4 2010–2016 ABS Plastic Gloss Black Rear Reading Light Adhesive Fit Interior Trim No Drilling Overview The Land Rover Discovery 4 — sold as the LR4 in North American markets — remains one of the most capable and characterful Land Rovers ever built. Owners who live with these vehicles day to day know how rewarding the right interior upgrade can be, particularly when it brings a cohesion to cabin details that the factory may have left understated. The rear reading light surround is one of those areas: functional, frequently visible to rear passengers, and ripe for a thoughtful refresh. This rear reading light frame sticker is formed from high-grade ABS plastic and finished in a deep, consistent gloss black. It sits precisely over the existing light surround, updating the look of the headliner-mounted unit without any cutting, drilling, or permanent alteration to the original trim. The result is a visually tidier rear overhead area that feels considered rather than aftermarket — exactly the kind of detail Discovery 4 owners appreciate. The adhesive backing is pre-applied and strong enough to hold permanently under normal cabin conditions, including summer heat cycles. Whether you're refining a high-mileage interior or simply adding definition to an already well-kept cabin, this trim piece earns its place through subtlety and fit quality rather than spectacle. What's Included 🔲 Rear Reading Light Frame 1 × ABS black trim surround, pre-cut to fit 🔧 Pre-Applied Adhesive Double-sided tape backing — no extra tools needed 🧴 Cleaning Prep Wipe Surface prep wipe included for clean adhesion Product Highlights Precision-cut specifically for the Discovery 4 LR4 rear reading light surround High-quality ABS plastic — resistant to warping, cracking, and UV fade Gloss black finish complements both light and dark interior colour schemes Pre-applied double-sided adhesive for a clean, tool-free installation No permanent modification — completely reversible if required Lightweight construction adds no stress to the headliner or original trim Consistent colour and sheen across the full face of the frame Sits flush against the original surround with no visible gaps or lifting edges Covers minor scuffs or discolouration on the original plastic surround Compatible across all trim levels of the Discovery 4 LR4 (2010–2016) Vehicle Compatibility Vehicle Code Years Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 4 / LR4 — All Trim Levels L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  ·  🛠 Difficulty: Beginner Ensure the vehicle interior is at room temperature — avoid installation in cold conditions below 10°C, as this can reduce initial adhesive tack. Clean the existing rear reading light surround thoroughly using the included prep wipe or isopropyl alcohol on a lint-free cloth. Allow to dry completely before proceeding. Dry-fit the frame over the surround to confirm alignment and orientation. Note which edge sits toward the front of the vehicle. Peel back the protective film from the double-sided adhesive tape on the reverse of the frame, taking care not to touch the adhesive surface. Align the frame carefully from one edge and press down progressively across the face of the trim, applying firm, even pressure for 30–60 seconds. Allow the adhesive to cure for at least 2 hours before exposing the trim to significant vibration or temperature extremes. ⚠ Note: Do not attempt to reposition the frame after the adhesive has made contact with the original trim surface. If unsure of alignment, use masking tape to mark your position before final application. Ensure the original surround surface is completely dry and free of any silicone-based conditioner products, which can prevent adhesion. More Discovery 4 Interior Upgrades Browse the full range of Land Rover Discovery 4 interior styling accessories at Victorious Automotive — trusted by over 12,300 owners worldwide with a 4.9-star rating. Shop Discovery 4 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Protection Land Rover Discovery 4 LR4 Black Oxford Cloth Trunk Pet Seat Cover & Transport Pad (2010–2016) A precision-fit, heavy-duty Oxford cloth boot liner and pet transport pad engineered specifically for the Discovery 4 LR4 — keeping your load area immaculate on every journey. Discovery 4 LR4 2010–2016 Oxford Cloth Boot Protection Pet Transport Black Easy Fit Interior Accessory Overview The Land Rover Discovery 4 LR4 is one of the most capable and versatile family off-roaders ever built. Whether it's heading to the countryside for a weekend trail, carrying working dogs to the field, or simply surviving the daily demands of an active family, the boot takes the brunt of it. Mud, claws, wet gear, and heavy loads can quickly degrade even the most resilient OEM carpeting — and once the damage is done, it's permanent. This trunk pet seat cover and transport pad is designed with the Discovery 4 owner in mind. Manufactured from durable Oxford cloth — a tight-weave, water-resistant fabric well regarded for its toughness and ease of cleaning — the cover forms a reliable barrier between your boot floor and whatever life throws at it. Its tailored construction sits flush against the load area, covering the cargo floor fully and preventing slippage during transit. Beyond pure protection, this cover functions as a comfortable and secure transport pad for pets. The textured Oxford surface provides grip underfoot, reducing anxiety for animals travelling in the boot, while the wipe-clean finish means post-adventure clean-up takes seconds rather than minutes. It's a practical, understated upgrade that any Discovery 4 owner with dogs, livestock, or an active lifestyle will appreciate immediately. What's Included 🧱 Trunk Pet Seat Cover × 1 Full Oxford cloth boot protection and transport pad 📋 Fitting Guide Basic installation and care instructions included Product Highlights Precision-designed for the Discovery 4 LR4 boot floor (2010–2016) Heavy-duty Oxford cloth resists tears, punctures, and abrasion Water-resistant surface prevents moisture soaking through to OEM carpet Comfortable, non-slip surface for pet stability during transit Protects OEM upholstery from mud, claws, scratches, and debris Sleek matte black finish blends seamlessly with Discovery 4 interior Lightweight design — easy to remove, shake out, and reinstall Wipe-clean surface for fast, fuss-free maintenance No permanent modification required — fully reversible installation Manufactured to ISO9001 quality standards for consistent build quality Compatibility Vehicle Code Years Trim Fitment Land Rover Discovery 4 LR4 / L319 2010–2016 All Trims Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 All Trims Not Compatible Land Rover Discovery 5 L462 2017–2023 All Trims Not Compatible Range Rover Sport L494 2013–2022 All Trims Not Compatible Range Rover Vogue L405 2013–2021 All Trims Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 5–10 Minutes  |  Tools Required: None Open the Discovery 4 tailgate fully and clear any loose items from the boot area. Remove the trunk pet seat cover from its packaging and unfold it on a flat surface to allow any creases to relax. Place the cover into the boot, aligning the edges with the boot floor contours and load area walls. Press the cover flat and ensure it sits flush against the floor without bunching — adjust as needed for a snug, even fit. If transporting pets, ensure the cover is fully secured and flat before allowing animals into the boot. To clean, simply remove the cover, shake off loose debris, and wipe down with a damp cloth or hose off if heavily soiled. ⚠ Note: Always ensure the cover is properly laid flat before placing pets or cargo on top. A displaced or bunched cover may create uneven surfaces that could cause discomfort or instability for animals during transit. Do not use as a replacement for a dedicated pet safety barrier or harness. Protect Your Discovery 4 — The Right Way Every journey leaves a mark. This Oxford cloth boot cover ensures that mark stays on the cover, not on your Discovery 4's interior. Designed for owners who use their vehicles the way they were intended — and want them to look the part for years to come. Shop All Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Product Description: Enhance your vehicle's storage capabilities with this high-quality aluminum alloy side window storage rack. Designed specifically for models from 2004-2016, this rack offers a sleek, durable solution for organizing your car's interior space. Product Highlights: Custom-fit design ensures seamless integration into compatible vehicles. Constructed from robust aluminum alloy for long-lasting durability. Easy to install, enhancing your vehicle's storage space effortlessly. Product Specifications: Material: High Quality Aluminum Alloy Color: Black Compatibility: Suitable for specific models from 2004-2016 Package Includes: 1 x Side Window Storage Rack Notes: If you have any questions, please contact us for assistance. Purchase protection and tracking are available.

Victorious Automotive · Discovery 4 / Range Rover Sport L320 / Freelander 2 · Interior Trim Aluminum Alloy Steering Wheel Button Patch Cover — Range Rover Sport, Discovery 4 & Freelander 2 (2010–2016) Eleven precision-cut aluminum alloy button covers that refresh your steering wheel's worn controls with a factory-quality finish — no drilling, no tools, no fuss. Discovery 4 2010–2016 Range Rover Sport L320 2010–2013 Freelander 2 2013–2015 Aluminum Alloy Black & Silver Options Adhesive Fit 11-Piece Set Interior Upgrade Overview The Discovery 4, Range Rover Sport L320, and Freelander 2 all share a common trait — beautifully designed steering wheel controls that, over years of daily use, begin to show their age. The button legends fade, the surrounds scuff, and what was once a confident cockpit starts to feel its years. It's one of the most-touched surfaces in the cabin, and it shows. These aluminum alloy steering wheel button patch covers are engineered specifically for these three models, sitting over each existing control button with a precision fit that looks entirely factory. Available in black or silver to complement your interior colour scheme, the machined alloy surface introduces a tactile quality and visual refinement that the original plastic simply can't match. With 11 individual covers in the set and a clean double-sided adhesive backing, the installation takes minutes and requires no specialist tools or professional fitting. It's one of the most impactful interior refreshes you can make to a high-mileage Discovery 4 or Sport — immediate, reversible, and thoroughly satisfying. What's Included 🔩 11× Steering Wheel Button Covers Aluminum alloy, pre-cut for direct fitment 🔲 Double-Sided Adhesive Backing Pre-applied to each cover for clean installation 📋 Fitment Guide Button placement reference included Product Highlights Machined aluminum alloy construction — far superior to OEM plastic in durability and feel Available in Black or Silver to suit your interior trim preference Full set of 11 covers to refresh all steering wheel button positions in one install Pre-applied double-sided adhesive for a clean, tool-free fitment Precision-cut profiles designed to match each button recess exactly Covers scuffed, faded, or worn OEM button surrounds instantly No modification to the steering wheel required — fully reversible Tactile improvement over stock — buttons feel more premium under fingertip Resistant to daily wear, UV exposure, and cleaning chemicals Adds a refined, understated upgrade to one of the cabin's most-used surfaces Compatibility Vehicle Year Range Code Fitment Land Rover Discovery 4 2010–2016 L319 Direct Fit Range Rover Sport 2010–2013 L320 Direct Fit Land Rover Freelander 2 2013–2015 L359 Direct Fit Range Rover Sport 2013–2020 L494 Verify Before Purchase Range Rover Vogue 2013–2020 L405 Not Compatible Land Rover Discovery 5 2017–2024 L462 Not Compatible Land Rover Defender 2020–2026 L663 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Clean the steering wheel button surrounds thoroughly with an isopropyl alcohol wipe and allow to dry completely. Remove any grease, skin oils, or polish residue to ensure the adhesive bonds properly. Identify each cover against your steering wheel layout using the fitment guide. The covers are individually shaped — lay them out before committing to any placement. Peel back the adhesive liner on the first cover, position it carefully over the corresponding button recess, and apply firm, even pressure for 10–15 seconds. Work your way across all 11 buttons systematically — starting from the centre and working outward helps maintain alignment. Allow the adhesive to cure for 30–60 minutes before normal use. Avoid heavy finger pressure on the covers during this window. ⚠ Note: Ensure your vehicle matches one of the confirmed compatible models before purchase. Steering wheel button layouts can vary between facelift and pre-facelift variants. If you are unsure of your exact specification, please contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Upgrade Your Discovery 4 Interior Today Browse the full range of Land Rover Discovery 4 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🚚 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for the purpose of fitment compatibility.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Trim Stainless Steel Silver Door Speaker Cover Trim — Land Rover Discovery 4 LR4 (2010–2016) A precision-cut set of four stainless steel speaker cover trims that elevate the Discovery 4's cabin with a clean, durable, and factory-coherent finish. Discovery 4 · LR4 2010–2016 Stainless Steel Silver Finish Door Speaker Trim Interior Accessories Adhesive Fit Set of 4 Overview The Land Rover Discovery 4 — known internationally as the LR4 — is one of the most capable and characterful SUVs ever produced. Built between 2010 and 2016, it carries a purposeful interior design that rewards thoughtful upgrades. Owners who live with the Discovery 4 day-to-day know that small refinements to the cabin environment make a meaningful difference to how the vehicle feels — not just how it looks. These stainless steel door speaker cover trims are engineered specifically for the Discovery 4's four-door layout. Each piece is cut from high-grade stainless steel and finished in a brushed silver tone that complements the vehicle's existing interior metalwork and switchgear. Where factory plastic speaker surrounds can appear dated or scuffed with age, these trims restore a sense of precision and quality to one of the cabin's most frequently noticed surfaces. The installation relies on pre-applied double-sided adhesive, meaning no drilling, no panel removal, and no risk of damage. The result is a transformation that takes minutes but lasts for the life of the vehicle — exactly the kind of upgrade Discovery 4 owners appreciate. What's Included 🔲 Front Left Speaker Trim Driver's door — stainless steel, brushed silver 🔲 Front Right Speaker Trim Passenger door — mirror matched pair 🔲 Rear Left Speaker Trim Rear driver's side door — full set coverage 🔲 Rear Right Speaker Trim Rear passenger door — completes the set Product Highlights Precision-cut stainless steel construction for long-term durability Brushed silver finish complements Discovery 4 interior tones Custom-profiled to match factory door speaker apertures exactly Pre-applied 3M-grade double-sided adhesive backing included No drilling, cutting, or panel disassembly required Resistant to UV fading, humidity, and cabin temperature swings Protects speaker grilles from scuffs and everyday wear Full set of four — covers all four doors in one purchase Corrosion-resistant stainless steel — no peeling or tarnishing Clean, symmetrical finish consistent across all four doors Compatibility Vehicle Code Years Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the vehicle has been parked indoors or in a warm environment — adhesive bonds most effectively above 15°C (59°F). Using a clean microfibre cloth and isopropyl alcohol (IPA), thoroughly degrease the surface of each factory speaker surround. Allow to dry completely before proceeding. Test-fit each trim piece without removing the adhesive backing. Confirm alignment and orientation — note that front and rear trims may differ subtly in profile. Peel the adhesive backing from one trim piece. Position carefully from one edge, pressing firmly across the full surface to eliminate any air gaps. Apply firm, even pressure for 30–60 seconds per piece. Repeat for all four doors. Allow a minimum of 2 hours before exposing the trims to moisture or extreme temperatures. Full adhesive cure is achieved within 24 hours. ⚠ Note: Do not apply these trims over cracked, flaking, or heavily soiled surfaces. Ensure all four trims are orientated correctly before committing — repositioning after adhesive contact may reduce bonding strength. If in doubt, contact our team before installation. Upgrade Your Discovery 4 Interior Browse the full range of Discovery 4 interior accessories at Victorious Automotive — trusted by over 12,300 verified Land Rover owners worldwide. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Trim Co-Pilot Glove Box Cover Trim Panel Stickers – Land Rover Discovery 4 LR4 (2010–2016) A precision-cut interior trim overlay that refreshes the passenger-side glove box panel on your Discovery 4 LR4, available in three finishes to suit every cabin aesthetic. Discovery 4 LR4 2010–2016 ABS Plastic Silver Finish Black Finish Black Wood Grain Adhesive Fit Interior Trim Glove Box Panel No Drilling Overview The Land Rover Discovery 4 LR4 is a vehicle built on capability and character — and its interior deserves to reflect that same standard. Over time, factory plastic trim panels around the co-pilot glove box can show their age through scuffs, fading, and general wear. This trim panel sticker offers a straightforward, no-compromise way to restore or elevate the look of that area without the cost of a dealer replacement part. Engineered from high-grade ABS plastic and finished to complement the Discovery 4's original interior language, this glove box cover overlay fits cleanly over the existing panel surface. Three distinct finishes — Silver, Black, and Black Wood Grain — allow you to match your existing trim scheme or introduce a subtle upgrade in tone. The adhesive-backed installation method means no cutting, no drilling, and no risk to your original panels. For Discovery 4 owners who pay attention to the details inside the cabin, this is a low-effort, high-impact addition. It sits flush, looks factory-intentional, and takes minutes to apply. Whether you're refreshing a tired interior or personalising a well-kept example, it's the kind of considered upgrade that makes the difference every time you open the door. What's Included 🪄 Glove Box Cover Trim Panel 1 × ABS plastic overlay sticker in chosen finish 🔲 Pre-Applied Adhesive Backing Double-sided tape included on reverse of panel 📦 Protective Packaging Securely packaged to prevent transit damage Product Highlights Precision-cut to match the Discovery 4 LR4 co-pilot glove box panel geometry exactly High-grade ABS plastic construction — resistant to cracking, warping, and fading Available in Silver, Black, and Black Wood Grain to complement any interior Double-sided adhesive backing for a secure, rattle-free fit without tools No drilling, cutting, or modification to original panels required Slim profile sits flush with surrounding trim for a factory-integrated appearance Covers scuffs, scratches, and discolouration on the existing glove box surround 100% brand new — not a refurbished or used component Suitable for all Discovery 4 LR4 variants produced between 2010 and 2016 DIY-friendly installation completable in under 15 minutes with no specialist tools Compatibility Vehicle Code Years Fit Land Rover Discovery 4 LR4 L319 2010–2016 Direct Fit Land Rover Discovery 3 LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry interior. Open the passenger-side glove box and locate the cover trim panel surround on the fascia. Thoroughly clean the target surface with an alcohol-based wipe or isopropyl solution. Remove all dust, grease, and residue. Allow to dry completely — this step is critical for adhesion quality. Dry-fit the trim panel sticker against the surface before peeling the adhesive backing. Confirm alignment with all edges and any cut-outs before committing. Peel away a small portion of the adhesive backing and align one edge carefully. Once satisfied with positioning, press firmly across the full surface, working from the centre outward to avoid air bubbles. Apply firm, even pressure across the entire panel for 30–60 seconds. Pay particular attention to edges and corners to ensure a complete bond. Allow the adhesive to cure for a minimum of 2 hours at room temperature before opening or closing the glove box repeatedly. ⚠ Note: Do not install in cold or damp conditions — ambient temperature below 15°C significantly reduces initial adhesive performance. Avoid cleaning the trim area with harsh solvents or steam once installed, as this may compromise the bond over time. Upgrade Your Discovery 4 Interior Browse the full range of Land Rover Discovery 4 LR4 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover enthusiasts worldwide. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Discovery 3 / Discovery 4 / Range Rover Sport L320 · Interior Accessories Dashboard Sun Pad & Light-Proof Mat — Range Rover Sport L320 & Discovery 3/4 (LR3/LR4) 2004–2016 A precision-cut, light-eliminating dashboard mat that kills glare at the source — keeping your cabin cooler, your instruments clearer, and your interior looking sharper every drive. Range Rover Sport L320 Discovery 3 / LR3 Discovery 4 / LR4 2004–2016 ABS Plastic Light-Proof Anti-Glare Black / Yellow Direct Fit No Drilling Overview The Land Rover Discovery 3, Discovery 4, and Range Rover Sport L320 share a commanding driving position — but their wide, flat dashboard architecture is notorious for reflecting sunlight directly into the driver's field of view. On long motorway runs or during low-sun commutes, that dashboard glare isn't just irritating, it's a genuine visibility concern. This is the detail many owners have been quietly solving for years. This dashboard sun pad is engineered as a direct-fit solution for the specific dashboard contour of the L320 Sport and Discovery 3/4 platform. Constructed from high-quality ABS plastic with a light-absorbing matte finish, it sits flush against the dashboard surface and eliminates the reflective hot spots that reach the windscreen. Unlike generic foam mats that shift, crease, and degrade in UV, this pad is rigid, dimensionally stable, and finished to a standard that looks purposeful rather than remedial. Installation is entirely adhesive-based — no drilling, no clips, no permanent modification to your interior. The double-sided tape bond is strong enough to remain secure through heat cycling and vibration, yet clean enough to remove without damage should you ever wish to. Whether you're daily-driving a Discovery 4 or preserving a well-kept Sport, this is the kind of considered upgrade that improves every journey without drawing attention to itself. What's Included 🧩 Dashboard Sun Pad 1× precision-cut ABS light-proof mat, direct fit 🔲 Double-Sided Adhesive Pre-applied or included tape for tool-free fitment 📋 Fitting Instructions Step-by-step guide for clean, accurate installation Product Highlights Precision-cut to match the Discovery 3/4 and Range Rover Sport L320 dashboard profile exactly ABS plastic construction — rigid, UV-stable, and resistant to warping in high-heat cabin environments Matte light-absorbing finish eliminates windscreen reflections caused by dashboard surfaces Available in Gloss Black and Yellow — suits both understated and styled interior themes Tool-free installation via pre-applied double-sided adhesive — no drilling or modification required Dimensionally stable across temperature extremes — won't curl, shift, or delaminate over time Protects the factory dashboard surface from UV fading and daily wear beneath the pad Manufactured in an ISO 9001 certified facility for consistent quality and finish accuracy Leaves no permanent residue — fully reversible installation for lease vehicles or resale prep Brand new, 100% quality-checked — not a foam aftermarket substitute, built to last Compatibility Vehicle Model Code Year Range Fitment Range Rover Sport L320 2010–2013 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Direct Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2022 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Start with the vehicle parked and the interior at ambient temperature — avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Thoroughly clean the dashboard surface with an isopropyl alcohol wipe and allow it to dry completely. Remove any dust, polish residue, or protectant that could compromise the bond. Dry-fit the sun pad in position first, confirming the contour aligns correctly with your specific dashboard. Check around vents, instrument binnacle edges, and the windscreen base. Peel the backing from the double-sided adhesive and carefully lower the pad into its confirmed position. Apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for at least 2–4 hours before exposing the vehicle to extreme heat or direct sun. Avoid disturbing the pad during this period. ⚠ Important: Ensure the dashboard surface is completely free of silicone-based dressings or polish before fitting. These products will prevent the adhesive from bonding effectively and may cause the pad to lift over time. If in doubt, clean the area twice with isopropyl alcohol before proceeding. Explore More for Your Discovery or Sport If you're upgrading the interior of your Discovery 3, Discovery 4, or Range Rover Sport L320, browse the full collection of accessories curated specifically for your vehicle. Discovery 3 Collection Discovery 4 Collection Range Rover Sport L320 Collection Discovery 5 Collection Built for Owners Who Notice the Details At Victorious Automotive, every product in our range is selected because it makes a genuine difference — to the driving experience, to interior quality, or to long-term preservation. This sun pad is exactly that kind of upgrade. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Silver Sequin Frame Sticker — Front Row Cup Holder, Center Console · Land Rover Discovery 4 LR4 (2010–2016) A precision-cut sequin-finish trim sticker that refreshes the front cup holder surround of your Discovery 4 centre console — no tools, no modification, just a noticeably sharper interior. Discovery 4 / LR4 2010–2016 ABS Plastic Silver Sequin Finish Centre Console Cup Holder Frame No-Drill Install Interior Trim Overview The Land Rover Discovery 4 — known as the LR4 in North America — is one of the most accomplished and characterful off-roaders ever built. Produced between 2010 and 2016, it earned a devoted following for its combination of genuine off-road capability and composed on-road manners. For owners who use theirs daily, the centre console is one of the most-touched areas of the cabin, and the original cup holder surround can begin to look tired after years of use. This trim sticker is the cleanest way to address that without lifting a single panel. Manufactured from high-grade ABS plastic with a striking silver sequin finish, this cup holder frame sticker is precision-cut to match the front row cup holder aperture of the Discovery 4's centre console. The sequin texture catches light in a way that feels considered and purposeful — not gaudy — complementing the Discovery 4's interior design language without overwhelming it. It sits flush against the console surface, giving the impression of an OEM-quality refresh at a fraction of the cost. Installation requires no drilling, no wiring, and no professional fitting. The sticker ships with pre-applied double-sided adhesive backing, meaning the process from unboxing to finished result takes under ten minutes. Whether you're refreshing a high-mileage workhorse or adding a finishing touch to a meticulously maintained example, this is one of the simplest interior upgrades available for the Discovery 4. What's Included 🪟 Cup Holder Frame Sticker × 1 ABS silver sequin finish, pre-cut for Discovery 4 LR4 front row centre console 🔲 Pre-Applied Adhesive Backing Strong double-sided tape pre-fitted to the reverse — ready to install out of the box Product Highlights Precision-cut ABS plastic trim matched to Discovery 4 LR4 cup holder dimensions Silver sequin finish adds subtle, light-catching texture to the centre console Strong double-sided adhesive backing ensures a secure, long-lasting bond No drilling, no modification — completely reversible installation Resistant to everyday wear, UV exposure, and temperature fluctuations inside the cabin Refreshes a high-traffic area of the interior without a full console replacement Sits flush for a factory-fitted appearance once applied Lightweight ABS construction — adds no meaningful weight to the vehicle 100% brand new — supplied in protective packaging to prevent transit damage Suitable for both left-hand and right-hand drive Discovery 4 variants Compatibility Vehicle Model Code Year Range Trim Position Fitment Land Rover Discovery 4 LR4 / L319 2010–2016 Front Row Cup Holder, Centre Console Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 — Not Confirmed Land Rover Discovery 5 L462 2017–present — Not Compatible Range Rover Sport L494 L494 2013–2020 — Not Compatible Range Rover Vogue L405 L405 2013–2020 — Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Begin with the centre console surface clean and completely dry. Use an isopropyl alcohol wipe on the cup holder surround area to remove any residue, dust, or finger oils — this is the single most important step for adhesion quality. Allow the cleaned surface to dry fully. Do not proceed while any moisture remains. Remove the frame sticker from its packaging and hold it against the cup holder aperture without removing the adhesive backing. Confirm alignment and fitment before committing. Carefully peel away the adhesive backing film, taking care not to touch the adhesive surface with your fingers. Align the sticker precisely over the cup holder surround and press down firmly from the centre outward. Apply sustained pressure for 30–60 seconds across the entire surface. Allow the adhesive to cure for at least one hour before placing items in or near the cup holders. ⚠ Note: Install in a warm environment where possible — adhesive performance is reduced in temperatures below 10°C. Avoid installing immediately after the vehicle has been parked in direct sunlight as an overheated surface can also affect bonding. If you have any doubts about fitment for your specific build date or specification, contact our team before installing. More for Your Discovery 4 Browse our full range of interior and exterior accessories specifically curated for the Land Rover Discovery 4 LR4 — from trim upgrades to protective accessories built for owners who expect more from their vehicles. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery 4 · Interior Accessories Black Mobile Phone & GPS Navigation Screen Bracket — Land Rover Discovery 4 LR4 (2010–2016) A precision-engineered, direct-fit phone and GPS bracket that mounts cleanly to the Discovery 4's navigation screen surround — keeping your device secure, visible, and exactly where you need it. Discovery 4 / LR4 2010–2016 Aluminium Alloy & ABS Black Finish Direct Fit No Drilling Required GPS & Phone Mount ISO9001 Certified Overview The Land Rover Discovery 4 — sold as the LR4 in North America — is one of Land Rover's most capable and enduring platforms, built for genuine off-road use while delivering a refined on-road experience. Running from 2010 through to 2016, the L319 generation became a favourite among adventure-focused owners who demand both function and quality from every component in their cabin. This black mobile phone and GPS navigation screen bracket is designed specifically for the Discovery 4's dashboard architecture, mounting cleanly to the front face of the factory navigation screen surround without requiring any permanent modification. The result is a tidy, factory-integrated look that doesn't compromise the interior aesthetic — something Discovery 4 owners rightly care about. Constructed from a combination of high-grade aluminium alloy and ABS plastic, this bracket offers the rigidity needed to hold a phone or compact GPS unit securely across varied terrain, whether you're navigating city streets or rough tracks. Installation is adhesive-based and straightforward, requiring no tools and no damage to original trim. What's Included 📱 Phone & GPS Bracket 1× Navigation screen front mount, black finish 🔧 Double-Sided Adhesive Pre-applied or included adhesive pads for secure fitment 📄 Fitting Guide Basic installation reference included in packaging Product Highlights Custom-designed specifically for the Discovery 4 / LR4 dashboard layout High-grade aluminium alloy and ABS construction for long-term durability Mounts to the navigation screen surround without drilling or cutting Adhesive installation — clean, reversible, and non-destructive to trim Secure hold for phones and compact GPS devices across all road conditions Black finish blends seamlessly with the Discovery 4's interior colour scheme Optimised viewing angle for at-a-glance navigation and call management Lightweight construction adds no meaningful weight or vibration risk 100% brand new — sourced from an ISO9001-certified manufacturing facility Compatible with all Discovery 4 / LR4 variants produced between 2010 and 2016 Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 L319 2010–2016 Direct Fit Land Rover LR4 (North America) L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 (early) 2004–2009 Not Confirmed Land Rover Discovery 5 L462 2017–present Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the navigation screen surround and mounting area are clean and free of dust, oils, or residue. Use an isopropyl alcohol wipe if available for best adhesion. Dry-fit the bracket against the navigation screen surround to confirm positioning and verify your preferred viewing angle before committing. Peel the protective backing from the double-sided adhesive pads supplied with the bracket. Press the bracket firmly into position on the screen surround, applying steady pressure for 30–60 seconds to ensure full contact between adhesive and surface. Allow the adhesive to cure for a minimum of 1–2 hours before placing a device in the mount or driving over rough terrain. Insert your phone or GPS device into the bracket and adjust the angle as needed for clear sightlines while driving. Note: Ensure the mounted device does not obstruct your view of the road or interfere with access to the factory navigation controls. Always secure your phone before setting off — never mount while driving. If in doubt about fitment on your specific Discovery 4 variant, contact us before installation. Built for the Discovery 4. Backed by Victorious. Whether you're heading into the city or out onto the trail, keeping your navigation accessible and your eyes on the road matters. This bracket is a simple, clean upgrade that every Discovery 4 owner will appreciate the moment it's fitted. Shop All Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Land Rover Discovery 4 LR4 ABS Black Side Air Conditioning Vent Outlet Cover Trim Rings (2010–2016) A precise, no-drill interior upgrade that frames every side air vent in gloss black — elevating the cabin aesthetic of your Discovery 4 with factory-finish confidence. Discovery 4 / LR4 2010–2016 ABS Plastic Gloss Black Adhesive Fit Set of 4 Interior Trim No Drilling Required Overview The Land Rover Discovery 4 — sold as the LR4 in North America — earned its reputation as one of the most capable and refined large SUVs of its generation. Produced from 2010 through 2016, the Discovery 4 offered a commanding interior that rewarded long-distance journeys and demanding terrain alike. Yet for owners who truly live in their vehicles, the standard plastic vent surrounds are a detail that's always looked just slightly unfinished — a minor visual inconsistency in an otherwise purposeful cabin. These ABS Black Side Air Conditioning Vent Outlet Cover Trim Rings are engineered specifically to address that. Precision-formed from high-grade ABS plastic, each ring sits flush against the existing vent bezel, adding a defined black frame that ties the dashboard and door panel ventilation points into a cohesive, intentional look. Whether your Discovery 4 wears a dark or light interior, the gloss black finish adds contrast, depth, and a subtle sense of customisation without altering the factory hardware in any way. Unlike generic vent trim that requires modification or leaves visible gaps, this set is designed to the exact dimensions of the Discovery 4's side vents — meaning no trimming, no guesswork, and no compromise on fitment. It's the kind of detail that other Discovery owners will notice, but that reads as factory to everyone else. What's Included 🔲 Vent Cover Trim Rings × 4 Full set for all four side AC vent outlets 🔧 Pre-Applied Adhesive Backing Double-sided tape included on each ring 📄 Installation Guide Simple step-by-step fitment instructions Product Highlights Precision-engineered for the Discovery 4 / LR4 (2010–2016) side AC vents High-grade ABS plastic — impact-resistant, heat-stable, and warp-resistant Gloss black finish that complements both light and dark interior colour schemes Direct-fit design — no cutting, drilling, or modification required Pre-applied double-sided automotive adhesive for a clean, permanent bond Covers all four side vent outlets — front and rear — in a single set Factory-flush profile sits seamlessly against the original vent bezel Resistant to UV fading, interior heat cycles, and everyday wear Reversible installation — does not permanently alter OEM components Pairs perfectly with other Discovery 4 interior black trim upgrades Compatibility Vehicle Model Code Years Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 4 (Facelift) L319 FL 2014–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 Early 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Range Rover Vogue L405 / L322 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature. Avoid installation in very cold conditions as adhesive bonding is reduced below 10°C (50°F). Clean each vent bezel surround thoroughly with an isopropyl alcohol wipe. Remove all dust, grease, and fingerprints from the mounting surface and allow to dry completely. Test-fit each trim ring against the vent surround before removing the adhesive backing — confirm alignment and seating before committing. Peel the adhesive backing from one ring. Carefully align the ring to the vent bezel, starting from the top edge, and press firmly into position across the full surface. Hold each ring firmly for 30–60 seconds after placement, applying even pressure to ensure full adhesive contact across all edges. Repeat for all four rings. Allow the adhesive to cure for at least 24 hours before subjecting the trim to heavy cleaning or extreme temperature changes. ⚠ Note: Ensure the vent surface is completely clean and dry before application. Adhesive bond strength is significantly reduced on oily, damp, or textured surfaces. Do not attempt to reposition the rings once the adhesive has made full contact, as this may reduce bond effectiveness. Upgrade Your Discovery 4 Interior Shop the full range of Land Rover Discovery 4 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 · Interior Storage Aluminum Alloy Black Glove Box Storage Organizer for Land Rover Discovery 4 (2010–2016) A precision-fitted glove box partition that brings genuine order to your Discovery 4's passenger compartment — without cutting corners on finish or fit. Discovery 4 · L319 2010–2016 Aluminum Alloy Gloss Black Glove Box Organizer No-Drill Install Interior Storage Direct Fit Overview The Land Rover Discovery 4 is a vehicle built for serious owners — those who travel far, carry a lot, and expect everything to be exactly where they left it. The factory glove box, while adequately sized, offers little in the way of internal structure. Over time, documents, tools, and everyday essentials become a jumbled mess that undermines the composed, premium feel the Discovery 4 deserves. This Aluminum Alloy Glove Box Storage Organizer is engineered specifically for the 2010–2016 Discovery 4 (L319) and drops cleanly into the existing glove box cavity without any modification to the vehicle. The partition divides the available space into clearly defined zones, keeping your cabin essentials separated, accessible, and properly secured — whether you're navigating city streets or heading into more demanding terrain. Crafted from high-grade aluminum alloy and finished in a sleek matte black, this organizer blends naturally with the Discovery 4's interior trim rather than looking like an afterthought. It installs in minutes using the included double-sided adhesive, leaving no marks, no residue, and no regrets. A small upgrade that makes a meaningful difference every single day you open that glove box. What's Included 🗂️ Glove Box Storage Partition Aluminum alloy, matte black finish — qty: 1 🔲 Double-Sided Adhesive Strips Pre-applied for clean, residue-free fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-designed exclusively for the Discovery 4 (L319) 2010–2016 glove box cavity Premium aluminum alloy construction — rigid, lightweight, and corrosion resistant Matte black finish complements the Discovery 4's factory interior trim Divides glove box space into multiple functional storage zones Tool-free, no-drill installation using pre-applied double-sided adhesive Keeps documents, cards, tools, and accessories neatly separated and accessible Slim-profile design retains maximum usable storage volume in the glove box Manufactured in an ISO 9001-certified facility for consistent quality assurance Easy to remove and reposition without leaving marks on factory surfaces Ideal companion upgrade alongside other Discovery 4 interior accessories Compatibility Vehicle Model Code Year Range Trim / Grade Fitment Land Rover Discovery 4 L319 2010–2016 S / SE / HSE / HSE Luxury Direct Fit Land Rover Discovery 4 L319 2009 (Pre-facelift) All Trims Verify First Land Rover Discovery 3 L319 2004–2009 All Trims Not Compatible Land Rover Discovery 5 L462 2017–2024 All Trims Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Installation Notes 🛠️ Difficulty: Easy  ·  ⏱️ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Open the glove box fully and remove any existing contents to give yourself a clear working surface. Wipe the interior base of the glove box thoroughly with a clean, dry microfibre cloth to remove any dust, oils, or debris — this ensures a strong adhesive bond. Peel back the protective liner from the pre-applied double-sided adhesive strips on the underside of the partition. Lower the partition into the glove box, aligning it with the intended divider position. Press down firmly and hold for 20–30 seconds to activate the adhesive. Allow a minimum of 1 hour before placing any heavy items against the partition to allow the adhesive to fully cure. Close the glove box and confirm the lid closes without obstruction. Your storage organizer is now ready to use. ⚠ Important: Ensure the glove box surface is completely dry and free of any cleaning product residue before applying the adhesive. Fitting in temperatures below 10°C (50°F) may reduce adhesive performance — allow the vehicle to warm up to room temperature first if working in cold conditions. Elevate Your Discovery 4 Interior This is the kind of detail that Discovery 4 owners notice every single day. Small, purposeful, and built to last — exactly what your vehicle deserves. Browse the full Discovery 4 interior collection at Victorious Automotive. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Accessories Black Oxford Cloth Trunk Storage Organiser Bag — Land Rover Discovery 4 LR4 (2010–2016) A purpose-built cargo organiser that transforms the Discovery 4's boot into a structured, tidy space — keeping tools, recovery gear, and everyday essentials exactly where you need them. Discovery 4 LR4 2010–2016 Oxford Cloth Boot Organiser Cargo Storage Tool Bag Direct Fit Black Overview The Land Rover Discovery 4 LR4 is a vehicle built for the full spectrum of life — from the daily commute to serious off-road adventures. Whether you're loading up for a weekend away, carrying recovery equipment on a trail, or simply managing the chaos of family life, the boot of your Discovery 4 can quickly become an unorganised mess. Loose items shifting during cornering, tools rattling around in the cargo bay, and groceries toppling over are all too familiar problems for Discovery owners. This purpose-designed trunk storage organiser bag offers a clean, structured solution. Constructed from heavy-duty black Oxford cloth — a material chosen for its tear resistance, water resistance, and long-term durability — the bag sits neatly within the cargo area of your Discovery 4 LR4, providing dedicated compartments for tools, first aid kits, recovery gear, cables, and everyday carry essentials. The interior layout ensures nothing slides or shifts, even over rough terrain. Engineered as a direct-fit solution for the 2010–2016 Discovery 4 and LR4, this organiser integrates naturally into the existing boot space without modification. It's the kind of thoughtful interior upgrade that Discovery owners appreciate — functional, understated, and built to last as long as the vehicle it lives in. What's Included 🧳 Trunk Storage Organiser Bag 1 × black Oxford cloth cargo bag, direct fit for Discovery 4 LR4 2010–2016 Product Highlights Heavy-duty Oxford cloth construction resists tears, abrasion, and daily wear Water-resistant material protects contents from spills and boot moisture Direct-fit design tailored specifically for the Discovery 4 LR4 boot space Multiple compartments organise tools, cables, recovery gear, and essentials Prevents cargo from shifting or sliding on rough terrain and sharp corners Discreet black finish matches the Discovery 4's factory interior aesthetic Lightweight yet robust — adds minimal weight while maximising organisation Easy to install with no tools, drilling, or permanent fixings required Easy to remove and clean — maintain hygiene without effort 100% brand new, quality-inspected before despatch Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 L319 2010–2016 Direct Fit Land Rover LR4 L319 2010–2016 Direct Fit Land Rover Discovery 3 L319 2004–2009 Not Confirmed Land Rover Discovery 5 L462 2017–present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Open the tailgate of your Discovery 4 LR4 and clear the existing cargo area of loose items. Unfold and expand the Oxford cloth organiser bag to its full shape, ensuring all compartments are open and accessible. Position the organiser bag within the boot space, aligning it to the contours and side walls of the Discovery 4's cargo area. Press the bag firmly into place. The shaped base and sides will naturally conform to the boot floor for a secure fit. Load your tools, recovery gear, or cargo into the designated compartments and close the tailgate. ⚠ Please Note: Verify fitment for your specific model year before purchase. If your Discovery 4 has been fitted with aftermarket boot liners or cargo barriers, fitment dimensions may vary slightly. Contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions prior to ordering. Keep Your Discovery 4 Organised, Every Drive At Victorious Automotive, we supply only accessories that earn their place in a Land Rover. This trunk organiser is a simple addition that makes a genuine difference — whether you're heading off-road or managing the weekly shop. Explore our full Discovery 4 accessories range below. Shop All Discovery 4 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 4 & 5 · Interior Accessories Rear Window Curtain Sunshade & Mosquito Net for Land Rover Discovery 4 & 5 (LR4 / LR5) 2006–2022 Purpose-built rear window curtains that block harsh sunlight and keep insects out — without compromising airflow inside your Discovery. Discovery 4 (LR4) Discovery 5 (LR5) 2006–2022 High-Quality Nylon Sunshade Mosquito Net Black Direct Fit No Drilling Overview The Land Rover Discovery 4 and Discovery 5 are built for exploration — whether that means school runs through the city or long weekend trips into the countryside. But sustained exposure to direct sun through the rear windows heats up the cabin quickly, strains your air conditioning, and can make rear-seat passengers genuinely uncomfortable on longer journeys. These rear window curtains are precision-designed to suit the Discovery 4 (2006–2016) and Discovery 5 (2017–2022) specifically, meaning the fit follows the exact contour and profile of your rear side windows. Constructed from high-quality nylon mesh, they perform a dual function: filtering and significantly reducing solar heat and glare, while simultaneously acting as a fine-mesh mosquito barrier when windows are cracked open during warmer months or overnight stops. Installation requires no tools, no permanent modification, and no specialist knowledge. The double-sided adhesive backing anchors each curtain cleanly to the window surround, leaving no residue and no trace when removed. For Discovery owners who spend real time in their vehicles — whether commuting, overlanding, or travelling with children — this is a practical, unobtrusive upgrade that makes a measurable difference to cabin comfort from day one. What's Included 🪟 Rear Window Curtains × 2 One per rear side window — custom-cut nylon mesh panels 🔧 Adhesive Mounting Strips Pre-applied double-sided adhesive for tool-free fitment 📄 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Custom-profiled fit for Discovery 4 and Discovery 5 rear side windows High-quality nylon mesh construction — lightweight, durable, and resistant to UV degradation Blocks direct sunlight and significantly reduces solar heat build-up in the rear cabin Fine-mesh barrier prevents mosquitoes and insects entering through open windows Maintains airflow — unlike solid tinted films, mesh allows natural ventilation Tool-free installation using pre-applied double-sided adhesive — fits in minutes Residue-free removal — no permanent modification to your vehicle's interior Discreet black finish integrates cleanly with the Discovery's interior trim Compatible with both the LR4 (2006–2016) and LR5 (2017–2022) generations Ideal for families, overlanders, and anyone spending extended time in their Discovery Compatibility Vehicle Generation / Code Year Range Fitment Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 5 LR5 / L462 2017–2022 Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Verify Before Purchase Land Rover Discovery Sport L550 2015–2022 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 10–15 Minutes  |  Tools Required: None Thoroughly clean the window surround area where the adhesive strips will be applied. Use a dry cloth to remove any dust, moisture, or grease — this ensures a strong, lasting bond. Test-fit each curtain panel against the rear side window before removing the adhesive backing. Confirm the profile lines up correctly with the window edge and frame. Peel back the adhesive backing from the mounting strips and carefully position the curtain panel against the window surround, starting from one corner and pressing firmly along the entire edge. Apply firm, even pressure along the adhesive line for 30–60 seconds to ensure full contact and adhesion. Repeat the process for the second rear window. Allow 1–2 hours before opening and closing windows to allow the adhesive to fully cure. ⚠ Note: Ensure surfaces are completely dry and at room temperature before installation. Avoid fitting in very cold or wet conditions as this may reduce adhesive performance. Do not stretch or force the mesh panel — if fitment feels incorrect, check you have the correct version for your Discovery generation (LR4 or LR5). Browse More Discovery Accessories Looking to further enhance your Discovery's interior or exterior? Explore our full collections tailored specifically to each Discovery generation: 🔗 Discovery 4 Accessories Full range for LR4 2009–2016 🔗 Discovery 5 Accessories Full range for LR5 2017–2022 🔗 Discovery 3 Accessories Full range for LR3 2004–2009 🔗 Discovery Sport Accessories Full range for L550 2015–2022 Elevate Your Discovery. Every Journey. Trusted by over 12,300 Land Rover and Range Rover owners worldwide. Every accessory we carry is selected for fit, finish, and function — because your Discovery deserves nothing less. Shop Discovery 4 & 5 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery LR3 & LR4 · Exterior Accessories Aluminum Alloy Black Rear Side Roof Ladder — Land Rover Discovery LR3 & LR4 (2004–2016) Gain confident, safe roof access on your Discovery with a precision-formed aluminium alloy ladder finished in stealth black — built to complement the LR3 and LR4's rugged character. LR3 · LR4 2004–2016 Aluminium Alloy Matte Black Finish Rear Side Mounting Roof Access Direct Fit Brand New Overview The Land Rover Discovery LR3 and LR4 occupy a unique space in the 4x4 world — genuinely capable off-road, yet composed enough for everyday use. Owners of these vehicles tend to use them hard: roof tents, expedition racks, rooftop cargo systems, and overland gear all demand reliable, safe roof access. A proper ladder isn't a luxury — it's a necessity. This rear side roof ladder has been designed specifically for the Discovery LR3 (2004–2009) and LR4 (2009–2016) body structure. Constructed from high-grade aluminium alloy, it delivers the rigidity needed for frequent use without adding unnecessary weight to your build. The satin black finish ties seamlessly into the Discovery's exterior trim lines, giving it a purposeful, integrated appearance rather than an afterthought. Whether you're accessing a rooftop tent at camp, loading equipment onto a roof rack, or simply checking your load mid-journey, this ladder makes roof access safe, efficient, and repeatable. It's the kind of addition that earns its keep on every outing — functional enough for the trail, refined enough for the daily drive. What's Included 🪜 Rear Side Roof Ladder 1x aluminium alloy ladder unit, matte black finish 🔧 Mounting Hardware Adhesive and fixings included for secure installation 📄 Installation Guide Step-by-step fitment instructions Product Highlights Precision-engineered aluminium alloy construction — lightweight yet load-bearing Matte black finish resists corrosion and complements Discovery exterior trim Designed specifically for LR3 and LR4 body profiles — no cutting or modification required Robust step rungs for confident footing during roof access Adhesive-assisted mounting for a clean, rattle-free installation Does not interfere with existing roof rack or rail systems UV-stable finish — will not fade or chalk under prolonged sun exposure Low-profile design maintains vehicle aerodynamics and road presence 100% brand new — not a refurbished or reconditioned part Suitable for expedition builds, rooftop tents, and overland setups Compatibility Vehicle Code Years Fitment Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Land Rover Defender L663 2020–Present Not Compatible Installation Notes 🛠 Difficulty: Easy · Estimated Time: 30–45 Minutes · No Professional Fitting Required Thoroughly clean the mounting area on the rear side panel and lower roof edge of the Discovery using an isopropyl alcohol wipe. Allow to dry completely before proceeding. Dry-fit the ladder against the vehicle body to confirm alignment and positioning. Mark the intended placement lightly if needed before committing. Apply the included double-sided adhesive strips to the ladder's mounting points as directed, ensuring full contact coverage across each pad. Press the ladder firmly into position and hold with consistent pressure for 60 seconds per contact point to initiate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before placing any load or weight on the ladder. Avoid washing the vehicle during this period. Once cured, perform a gentle pull test on each mounting point to confirm the bond is secure before use. ⚠ Note: Surface temperature affects adhesive performance. Do not fit in direct sunlight, in temperatures below 10°C, or on wet bodywork. Always allow full cure time before use. If your Discovery has aftermarket body cladding or non-standard paint, test adhesion in a discreet area first. Built for Discovery Owners Who Actually Use Their Vehicle Every part we stock at Victorious Automotive is chosen with one question in mind: would we fit it to our own vehicle? This ladder earns a confident yes — practical, clean, and properly engineered for the LR3 and LR4. Shop All Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All brand names, vehicle names, and model codes referenced are used for compatibility identification purposes only. Always verify fitment with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Discovery 4 / Range Rover Sport L320 · Interior Trim Volume & Air Conditioning Knobs for 2010–2016 Land Rover Range Rover Sport, Discovery 4 / LR4 & Freelander 2 Restore or upgrade five of the most frequently touched controls in your cabin with precision-formed ABS knobs designed to fit your Land Rover exactly — available in Silver and Matte Black. Discovery 4 / LR4 Range Rover Sport L320 Freelander 2 2010–2016 ABS Plastic Silver & Matte Black 5-Piece Set No Drilling ISO9001 Manufactured Overview The Discovery 4, Range Rover Sport (L320) and Freelander 2 share a generation of Land Rover interior that remains hugely popular with owners who appreciate the combination of practicality and premium cabin presence. Over time, however, the original volume and climate control knobs are among the first components to show wear — fading, scuffing, or simply looking tired compared to the rest of the interior. These replacement knobs are purpose-built to the dimensions and profile of the original controls across all three platforms. Manufactured from high-quality ABS plastic to ISO9001 standards, they replicate the factory look and feel while giving you the option to introduce a subtle Silver or Matte Black finish — both of which pair exceptionally well with the standard Land Rover interior palette. The set of five covers all key rotary controls in the HVAC and audio cluster, meaning a single purchase restores the entire section uniformly. Installation is straightforward using the included double-sided adhesive — no tools, no drilling, and no modification to your original switchgear required. What's Included 🎛️ Volume Control Knob Replacement for the primary audio rotary dial ❄️ Air Con Knobs × 2 Left and right climate temperature/fan dials 🌀 Fan Speed Knob Blower/airflow rotary control replacement 📦 Double-Sided Adhesive Pre-cut strips included for clean fitment Total pieces in set: 5 decorative knob covers Product Highlights Precision-formed ABS plastic for a consistent, factory-like finish Available in Silver and Matte Black to suit your interior trim 5-piece set covers all primary HVAC and audio rotary controls Double-sided adhesive installation — no tools or drilling required Manufactured to ISO9001 quality management standards Direct-fit design for 2010–2016 Land Rover model range Resistant to everyday wear, UV exposure and cabin temperature cycles Uniform finish across all five knobs for a cohesive cabin look Low-profile cover design preserves the original knob function entirely Lightweight construction with no impact on rotary control feel Compatibility Vehicle Code Years Fitment Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Land Rover Freelander 2 L359 2010–2016 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 2011–2018 Not Compatible Unsure if this fits your exact build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm. Installation Notes 🔧 Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the existing knob surfaces are clean and free of grease or dust. Use an isopropyl alcohol wipe if available — this ensures the adhesive bonds firmly. Lay out all five knob covers and confirm the correct orientation for each position before applying adhesive. Peel the backing from the pre-cut double-sided adhesive strips and apply one strip to the back of each knob cover. Carefully centre each cover over the corresponding control knob, pressing firmly and holding for 10–15 seconds to allow the adhesive to bond. Allow 30–60 minutes before operating the controls to allow the adhesive to fully set. Avoid using the climate controls or audio volume immediately after fitting. ⚠ Note: These are decorative overlay covers and do not replace the underlying knob mechanism. If your existing knobs are cracked or physically damaged, we recommend replacing the original knob units first before applying these covers. Do not apply to wet or recently cleaned surfaces — allow to dry fully before installation. Upgrade Your Discovery 4 Interior Today Small details make a significant difference in a cabin you spend time in every day. Restore the look of your Land Rover's controls with a set that fits precisely, installs in minutes, and holds up to daily use. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Rearview Mirror Cover Trim Stickers for Land Rover Range Rover Sport, Evoque, Discovery 4 & LR4 (2010–2018) A precision-cut interior mirror trim panel that adds a refined, colour-matched finish to one of the most visible touchpoints inside your Land Rover — with no tools required. Discovery 4 L319 Range Rover Sport L320 Evoque L538 2010–2018 ABS Plastic 3 Finish Options No-Tool Fit Interior Trim Direct Adhesive Overview The Discovery 4, Range Rover Sport L320, and first-generation Evoque are three of Land Rover's most enduring platforms — vehicles built for both serious capability and a composed, upmarket cabin. Yet the factory rearview mirror surround is one of those small details that often goes overlooked, leaving a plain plastic panel in one of the most prominent sightlines of your interior. This ABS rearview mirror cover trim is designed to sit cleanly over the existing mirror surround, transforming the look of your upper cabin in minutes. Available in Silver, Black Wood Grain, and Carbon Fiber finishes, it allows you to either complement your existing trim or make a deliberate contrast statement — particularly popular amongst owners who have upgraded other cabin elements and want visual consistency throughout. Manufactured from high-quality ABS plastic, the panel is both lightweight and robust, resistant to the temperature cycles and UV exposure that degrade cheaper alternatives over time. The pre-applied double-sided adhesive backing ensures a flush, rattle-free installation with no drilling, cutting, or modification to your vehicle's factory components. What's Included 🪞 Rearview Mirror Cover Trim 1 x ABS panel in your chosen finish 🔲 Pre-Applied Adhesive Tape Double-sided, factory-positioned on reverse 📄 Installation Guide Simple fitting reference included Product Highlights Premium ABS plastic construction — durable, UV-stable and warp-resistant Three finish options: Silver, Black Wood Grain, and Carbon Fiber Pre-applied double-sided adhesive for clean, no-drill installation Precision-cut to mirror the factory surround profile exactly Flush fit with no visible edges or lifting — looks factory from day one Lightweight panel adds no perceptible weight or bulk to the mirror assembly Rattle-free once fitted — adhesive holds firm across temperature ranges Compatible across four distinct Land Rover and Range Rover platforms Reversible — removes cleanly without damaging the factory panel beneath 100% brand new — not refurbished, not a reproduction of a used component Compatibility Model Code Years Fit Range Rover Sport L320 2014–2017 Direct Fit Range Rover Evoque L538 2012–2018 Direct Fit Discovery Sport L550 2015–2019 Direct Fit Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L494 2013–2022 Verify Required Range Rover Vogue L405 2013–2021 Verify Required Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Time: 10–15 Minutes  |  🛠 Tools Required: None Clean the existing rearview mirror surround thoroughly with an isopropyl alcohol wipe and allow to dry completely — this is the most important step for adhesion longevity. Dry-fit the trim panel over the mirror surround without removing the adhesive backing. Confirm alignment, edge positioning, and panel orientation before committing. Peel back a small section of the adhesive backing. Align the panel carefully from one edge, pressing down progressively across the surface to avoid air pockets. Once positioned, apply firm, even pressure across the entire panel for 30–60 seconds to activate the adhesive bond fully. Allow 24 hours before exposing the trim to extreme temperature variation or moisture. Avoid touching or flexing the panel during this curing period. ⚠ Note: Ensure the mirror surround surface is completely dry and free of any silicone-based products, wax, or dashboard dressings before applying. These compounds significantly reduce adhesive performance and may cause the trim to lift over time. Browse Your Full Vehicle Collection Looking for more interior upgrades for your Land Rover? Explore the full range of accessories curated specifically for your model: 🚙 Discovery 4 / LR4 L319 · 2010–2016 🚙 Range Rover Sport L320 · 2005–2013 🚙 Range Rover Evoque L538 · 2012–2018 🚙 Discovery Sport L550 · 2015–2019 Elevate Every Detail Inside Your Land Rover Small changes in the right places define a truly refined cabin. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium interior upgrades — backed by our 30-day money-back guarantee and worldwide DHL, FedEx, and UPS shipping. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover / Range Rover · Fuel Tank Interior Trim Fuel Tank Inner Cover – Range Rover Sport L320 & Land Rover Discovery 3 / 4 (LR3 / LR4) | Gasoline & Diesel A precision-formed ABS inner tank cover that replaces worn or damaged factory liners — available for both petrol and diesel variants across multiple model years. L320 · L318 · L319 2004–2019 ABS Plastic Petrol & Diesel Direct Fit Double-Sided Adhesive Black / Yellow ISO9001 Manufactured Overview The Range Rover Sport L320 and Land Rover Discovery 3 and 4 (LR3/LR4) are vehicles that demand attention to every detail — from powertrain to interior finish. The fuel filler area is one of those subtle spaces that owners notice over time, particularly as the inner cover becomes scuffed, cracked, or discoloured from repeated fuelling. It's a small component, but it sits directly in your line of sight every time you open the fuel cap. This replacement inner tank cover is precision-matched to the original factory dimensions and engineered from durable ABS plastic — the same material class used throughout the interior trim of these vehicles. Available in black and yellow finishes, the cover slots cleanly into the fuel filler recess and adheres securely via integrated double-sided tape, requiring no drilling or special tooling. Designed for both gasoline (petrol) and diesel variants, it's compatible across a broad range of production years. Whether you're restoring the interior detail of a high-mileage Discovery 4 or maintaining the presentation of a well-kept Range Rover Sport L320, this cover delivers a clean, factory-correct appearance at a fraction of the cost of sourcing original parts. Manufactured in an ISO9001 certified facility, every unit is quality-controlled before dispatch. What's Included 🛡️ Fuel Tank Inner Cover × 1 ABS plastic, black or yellow finish — as selected at purchase 🔧 Pre-Applied Adhesive Backing Double-sided tape included — no additional fixings required Product Highlights 100% brand new — not a refurbished or used component Premium ABS plastic construction for long-term durability Precision-matched to OEM fuel filler recess dimensions Available in black and yellow to suit personal preference Compatible with both petrol (gasoline) and diesel fuel variants Double-sided adhesive backing for a clean, tool-free install Resistant to fuel vapour, moisture, and general fuel filler wear Manufactured in ISO9001 certified production facility Covers multiple model years across L320, LR3, and LR4 platforms Restores factory-correct appearance to a frequently overlooked area Vehicle Compatibility Vehicle Code Year Range Fuel Type Fit Range Rover Sport L320 2004–2009 Petrol & Diesel Direct Fit Range Rover Sport L320 2010–2013 Petrol & Diesel Direct Fit Land Rover Discovery 3 (LR3) L319 2004–2009 Petrol & Diesel Direct Fit Land Rover Discovery 4 (LR4) L319 2010–2016 Petrol & Diesel Direct Fit Range Rover Sport L494 2013–2020 Petrol & Diesel Verify Before Purchase Land Rover Discovery 5 L462 2017–Present Petrol & Diesel Not Compatible Range Rover Vogue L405 2013–2020 Petrol & Diesel Not Compatible Year ranges listed reflect typical production builds. Always confirm your specific vehicle's VIN and fuel filler configuration before ordering. Contact us if unsure. Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 10–15 Minutes  |  Tools Required: None Open your vehicle's fuel filler flap and remove the existing inner cover if present. It may be clipped or adhered in place — gently pry from one edge using a soft plastic trim tool if necessary. Clean the fuel filler recess thoroughly using a dry cloth to remove any residue, grime, or old adhesive. Allow the surface to dry completely before proceeding. Carefully peel the protective backing from the double-sided adhesive on the rear of the new cover, exposing the adhesive surface. Align the new inner cover carefully with the fuel filler recess, ensuring all edges sit flush and the cover is centred correctly before pressing into place. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Leave undisturbed for at least one hour before first use. ⚠ Important: Do not install on a wet, oily, or contaminated surface — this will significantly reduce adhesive strength and may cause the cover to detach. Ensure the vehicle has been parked and the fuel filler area is cool and clean before beginning installation. Verify colour and fuel type variant matches your vehicle before opening packaging. Shop More Discovery & Range Rover Sport Accessories Explore the full range of interior and exterior upgrades for your Land Rover Discovery 3, Discovery 4, and Range Rover Sport L320 — curated by enthusiasts, for enthusiasts. Browse Discovery 4 Collection → Browse Range Rover Sport L320 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 3 & 4 · Interior Trim ABS Black Wood Grain Gear Shift Head Cover Stickers – Land Rover Discovery 3, Discovery 4, LR3, LR4 & Freelander 2 (2007–2015) Refresh your gear selector surround with a precision-fit black wood grain trim cover — a subtle, high-impact interior upgrade for Discovery and Freelander 2 owners who demand more from their cabin. Discovery 3 · LR3 Discovery 4 · LR4 Freelander 2 2007–2015 ABS Plastic Black Wood Grain Gear Shift Cover No-Drill Fit ISO9001 Certified Overview The Land Rover Discovery 3, Discovery 4, and Freelander 2 are renowned for their capability and commanding interior presence — but years of daily use can leave the gear selector area looking tired, scratched, or simply dated. It's one of the highest-touch points in any cabin, and one of the first areas owners notice when the interior starts to show its age. These ABS black wood grain gear shift head cover stickers are engineered to fit the selector surround precisely across the 2007–2015 Discovery 3, Discovery 4 (LR3/LR4), and Freelander 2 model range. Constructed from rigid, high-grade ABS plastic with a rich black wood grain surface texture, they deliver a refined, premium aesthetic that elevates the overall feel of the centre console without requiring any modification to the vehicle. Installation is entirely tool-free — each piece arrives pre-fitted with strong double-sided adhesive backing that bonds cleanly to the factory surface. The result is a seamless, factory-finish appearance that looks deliberate and considered rather than aftermarket. Sourced from an ISO9001-certified manufacturing facility, these trims meet the quality expectations of enthusiast Land Rover owners worldwide. What's Included 🎛️ Gear Shift Head Cover Stickers 2 pieces — ABS black wood grain finish, pre-cut to fit 🔧 Pre-Applied Adhesive Double-sided tape pre-installed on each piece for immediate fitment 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Precision-cut ABS construction for accurate panel alignment on Discovery and Freelander 2 gear surrounds Rich black wood grain texture adds a premium, luxury feel to the centre console area Rigid ABS material resists warping, heat distortion, and UV fading over time Tool-free installation — no drilling, no cutting, no permanent modification required Pre-applied double-sided automotive-grade adhesive for a clean, lasting bond Covers surface scratches, scuffs, and worn areas on the factory gear selector trim Compatible across the full 2007–2015 Discovery 3, Discovery 4, LR3, LR4, and Freelander 2 range Sourced from an ISO9001-certified factory — quality-controlled production throughout Low-profile fit that does not interfere with gear selector operation or adjacent switchgear Reversible upgrade — can be removed cleanly without damage to factory trim panels Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 3 LR3 / L319 2007–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2015 Direct Fit Land Rover Freelander 2 L359 2007–2015 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–Present Not Compatible If you are unsure whether this trim fits your specific build or regional specification, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Ensure the gear selector and surrounding trim area is clean, dry, and free from grease, dust, or any existing wax or polish residue. Use an IPA (isopropyl alcohol) wipe for best adhesive performance. Dry-fit each cover piece over the gear shift head surround before committing — confirm alignment with all edges and panel gaps before removing the adhesive backing. Peel back the protective liner from the double-sided adhesive on the first piece, taking care not to touch the adhesive surface. Align the cover carefully over the gear shift head trim, starting from the top or a clearly defined reference point, then press firmly downward across the full surface. Apply sustained hand pressure for 30–60 seconds across the entire panel to ensure full adhesive contact, paying particular attention to edges and corners. Repeat the process for the second piece. Allow 12–24 hours before exposing the trim to heavy use or cleaning to allow the adhesive to fully cure. ⚠ Note: Do not attempt installation on a cold surface or in low-temperature environments — adhesive performance is significantly reduced below 15°C (59°F). If the factory trim surface has been previously treated with silicone-based interior dressings, clean thoroughly with IPA before fitting to ensure a lasting bond. Explore More Discovery & Freelander Accessories Looking to continue your interior refresh? Browse the full range of trim, storage, and protection accessories for your specific vehicle below: 🔗 Discovery 3 Accessories Full range for LR3 / L319 owners 🔗 Discovery 4 Accessories Full range for LR4 / L319 owners 🔗 Discovery 5 Accessories Interior & exterior upgrades for L462 Upgrade Your Discovery Interior Today Join over 12,300 Land Rover owners who trust Victorious Automotive for premium accessories. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT ✅ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Land Rover Discovery 4 Electronic Handbrake Anti-Scratch Decorative Stickers – ABS Silver Trim (2010–2016) Precision-fit protective trim panels that shield the base of your Discovery 4's electronic handbrake from daily scuffing — finishing the interior with a clean, factory-matched silver accent. Discovery 4 L319 2010–2016 ABS Plastic Silver Finish Anti-Scratch No-Drill Install Interior Trim Electronic Handbrake Overview The Land Rover Discovery 4 (L319), produced from 2010 through 2016, remains one of the most capable and characterful SUVs ever built — a genuine working vehicle with a refined, premium cabin that owners rightly want to keep in excellent condition. Over time, one of the first areas to show wear is around the electronic handbrake base, where hands, keys, and daily contact leave fine scratches that gradually dull the surrounding trim. These purpose-made anti-scratch decorative stickers are designed specifically for the Discovery 4's electronic handbrake surround. Manufactured from high-quality ABS plastic with a polished silver finish, they sit flush against the handbrake base, creating a clean visual accent while forming a durable barrier against the scratches and scuffs that accumulate in this high-contact zone. Unlike generic trim pieces, these panels are cut to match the exact contours of the Discovery 4 interior — meaning no trimming, no modification, and no compromise on fitment. If you care about your Discovery's interior looking as sharp as it did on day one, these are the kind of considered upgrades that quietly make a difference. What's Included 🛡️ Anti-Scratch Trim Panels × 2 ABS plastic, silver finish — left and right pieces 🔧 Pre-Applied Adhesive Backing Double-sided tape pre-fitted for immediate installation Product Highlights Custom-engineered for the Discovery 4 L319 electronic handbrake surround High-quality ABS plastic construction — durable and lightweight Polished silver finish complements factory Discovery 4 interior trim Protects against scratches, scuffs, and everyday contact wear Pre-applied double-sided adhesive for quick, tool-free installation Flush fitment with no drilling, cutting, or modification required Covers both sides of the handbrake base with a matched pair 100% brand new — not refurbished or remanufactured Preserves resale value by maintaining a well-kept interior appearance Compatible across all Discovery 4 variants from 2010 to 2016 Compatibility Vehicle Code Years Fit Land Rover Discovery 4 SE L319 2010–2016 Direct Fit Land Rover Discovery 4 HSE L319 2010–2016 Direct Fit Land Rover Discovery 4 XS L319 2010–2016 Direct Fit Land Rover Discovery 4 Landmark L319 2014–2016 Direct Fit Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Time: 10–15 Minutes  ·  🛠 Tools Required: None Park on a flat surface and ensure the electronic handbrake is engaged and the vehicle is off. Thoroughly clean the handbrake surround area with a dry microfibre cloth, removing all dust, grease, and residue. For best adhesion, use an isopropyl alcohol wipe and allow to dry completely. Test-fit both trim panels dry — without removing the adhesive backing — to confirm correct placement and orientation before committing. Peel the adhesive backing from one panel. Align carefully to the handbrake base and press firmly into position, applying steady pressure across the full surface for 30–60 seconds. Repeat the process for the second panel on the opposite side, ensuring symmetrical placement. Allow the adhesive to cure for a minimum of 2–4 hours before normal use. ⚠ Important: Do not apply to a warm or hot surface. Avoid washing the interior trim area for at least 24 hours after installation to allow full adhesive bonding. Surface must be completely dry prior to application. Complete Your Discovery 4 Interior Browse the full range of Discovery 4 interior and exterior accessories at Victorious Automotive — built for owners who take pride in every detail of their vehicle. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 3 & 4 · Interior Trim ABS Chrome & Black Air Outlet Adjusting Rod Cover Trim Stickers — Land Rover Discovery 3 & 4 (LR3 / LR4) A simple, high-impact interior upgrade that replaces the look of tired factory air vent rods with precision-formed ABS trim covers — available in chrome or gloss black to suit your cabin aesthetic. LR3 · LR4 2004–2016 ABS Plastic Chrome & Black Direct Fit No Drilling Interior Trim Set of 4 Overview The Land Rover Discovery 3 and Discovery 4 are known for their commanding presence, genuine off-road capability, and a cabin that was designed around practicality as much as refinement. Over time, however, small interior details — particularly the exposed plastic adjusting rods on the dashboard air vents — can begin to look dated or worn, detracting from an otherwise well-appointed interior. These ABS chrome and black air outlet adjusting rod cover trim stickers are purpose-built for the LR3 and LR4, wrapping the vent adjustment rods in a clean, finished layer that instantly modernises the dashboard. Available in polished chrome for a premium, factory-upgrade look, or gloss black for a blacked-out, contemporary feel, each cover is shaped to follow the exact profile of the original rods with no gap or overhang. Manufactured from high-grade ABS plastic, these covers resist everyday heat and UV exposure, making them a long-lasting addition rather than a temporary cosmetic fix. Installation requires no tools, no cutting, and no modification — simply clean the surface, peel, and press. The result is a noticeably more refined dashboard that takes minutes to achieve. What's Included 💨 Air Vent Rod Cover Trims × 4 Full set covering all four dashboard air outlet adjusting rods 🔲 Pre-Applied Adhesive Backing Double-sided tape pre-fitted to each cover for immediate installation 📋 Installation Guide Step-by-step instructions included in the package Product Highlights Precision-formed to fit LR3 and LR4 air vent adjusting rods exactly Available in polished chrome or gloss black to complement your interior High-grade ABS plastic construction — rigid, heat-resistant, and durable Pre-applied double-sided adhesive for a clean, tool-free installation No drilling, cutting, or modification required to the original vehicle UV-stable finish that won't fade or yellow over time Adds a premium factory-upgrade aesthetic to a commonly overlooked detail Covers the full set of four dashboard air outlet rods in one kit Compatible with all trim levels of Discovery 3 and Discovery 4 Fully reversible — original rods remain intact beneath the covers Compatibility Vehicle Code Years Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L322 L322 2002–2012 Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🛠 Difficulty: Beginner Begin with the vehicle parked in a clean, dry environment at room temperature. Avoid installing in cold or damp conditions as this can affect adhesive bonding. Using a clean microfibre cloth and a small amount of isopropyl alcohol, thoroughly clean each air vent adjusting rod to remove any dust, grease, or silicone residue. Allow the cleaned surfaces to dry completely — approximately 2–3 minutes — before proceeding. Hold each trim cover against its corresponding rod to confirm orientation and fit before removing the adhesive backing. Peel the protective film from the adhesive backing on the first cover, align carefully, and press firmly into position for 30–60 seconds to ensure full contact. Repeat for the remaining three covers, working across the dashboard methodically. Allow 2–4 hours for the adhesive to fully cure before operating the vent adjustment rods. Note: Do not apply excessive force to the vent rods immediately after installation. Allow the adhesive to set fully before normal use. If repositioning is needed, do so gently within the first 60 seconds of application before the bond cures. Complete Your Discovery's Interior Browse the full range of Discovery 3 and Discovery 4 interior accessories at Victorious Automotive — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions. Shop Discovery 3 Accessories   Shop Discovery 4 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover & Range Rover · Interior Trim Real Carbon Fiber Engine Start/Stop Button Cover – Discovery Sport, Discovery 5, Evoque & Range Rover Vogue A precision-cut real carbon fiber overlay that transforms your engine start/stop button into a genuine focal point of your Land Rover or Range Rover interior. Discovery Sport 2015–2023 Discovery 5 L462 Evoque L538 / L551 Range Rover Vogue Real Carbon Fiber No-Drill Fitment Interior Upgrade Scratch Protection Direct Adhesive Fit Overview The engine start/stop button is one of the most frequently touched surfaces inside your Land Rover or Range Rover — yet on factory specification, it's one of the most overlooked. Whether you're driving a Discovery Sport, a Discovery 5, a Range Rover Evoque, or a Range Rover Vogue, the OEM surround does little to complement the premium character these vehicles are capable of projecting. This real carbon fiber engine start/stop button cover is machined from genuine 3K-weave carbon fiber sheet, finished with a clear protective lacquer for depth and gloss. The tight, symmetrical weave pattern gives it a visual weight and texture that no vinyl wrap or ABS plastic can replicate — and at close range, the difference is immediately apparent to anyone who appreciates fine materials. Engineered to sit flush over your existing button housing, the cover installs in minutes using high-bond double-sided automotive tape — no cutting, no drilling, no modification to your vehicle's electronics. It protects the original switch from the micro-scratches, fingernail marks, and surface wear that accumulate over years of daily use, while adding the kind of detail that elevates the entire centre console aesthetic. What's Included 🔳 Carbon Fiber Button Cover 1× real 3K-weave carbon fiber start/stop overlay 🔗 Pre-Applied Adhesive Tape High-bond double-sided automotive tape, pre-fitted 🧹 Cleaning Wipe Alcohol prep wipe for surface preparation Product Highlights Genuine 3K-weave real carbon fiber — not vinyl, not ABS plastic Clear gloss lacquer topcoat for depth, protection, and a premium finish Precision-cut to align flush with the factory start/stop button housing High-bond double-sided automotive tape included — no tools required Protects original button from surface scratches and daily wear Lightweight construction — no added weight or stress on switch housing Fully reversible installation — remove cleanly without damage Compatible across multiple Land Rover and Range Rover platforms Subtle, authentic upgrade that complements both standard and upgraded interiors 100% brand new — individually inspected before despatch Compatibility Vehicle Code Years Fitment Land Rover Discovery Sport L550 2015–2023 Direct Fit Land Rover Discovery 5 L462 2017–2023 Direct Fit Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque L551 2019–2023 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Vogue L460 2022–2026 Verify Before Order Land Rover Discovery 4 L319 2009–2016 Not Compatible Range Rover Sport L494 2013–2020 Verify Before Order Not sure about your specific model year or trim? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes ⏱ Estimated Time: 5–10 minutes  ·  🔧 Difficulty: Beginner Start the vehicle or turn on the ignition to ensure the start/stop button illuminates — this helps confirm correct placement alignment before committing. Turn off the ignition and allow the button area to return to room temperature before applying. Use the included alcohol prep wipe to clean the surface of the button housing thoroughly. Remove all dust, skin oils, and residue. Allow to dry completely — approximately 60 seconds. Peel the backing from the pre-applied adhesive tape on the rear of the carbon fiber cover. Carefully align the cover over the start/stop button, ensuring the weave direction and button aperture are centred. Press firmly and hold for 30–60 seconds to activate the bond. Avoid operating the start/stop button for at least 1 hour after installation to allow the adhesive to fully cure. ⚠ Important: Do not install on a cold or damp surface — temperatures below 10°C will significantly reduce adhesive performance. Ensure the interior is at a comfortable room temperature before fitting. Do not use cleaning products that leave a waxy or silicone residue on the button surface prior to installation. Browse More for Your Vehicle 🚙 Discovery Sport Full accessory collection 🚙 Discovery 5 L462 Full accessory collection 🚙 Evoque L551 Full accessory collection 🚙 Range Rover Vogue L405 Full accessory collection Upgrade Your Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for genuine quality upgrades. Every order is backed by our 30-day money-back guarantee and shipped worldwide via DHL, FedEx, UPS, and TNT. Shop Interior Upgrades Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the property of their respective owners.

Victorious · Discovery 3 & 4 · Storage Solutions Rear Trunk Storage Shelf & Side Window Bracket for Land Rover Discovery 3 & 4 Premium aluminium storage architecture engineered to maximise cargo organisation and accessibility in your Discovery's load bay. LR3 / LR4 2004–2017 Aluminium Alloy ISO9001 Certified Tool-Free Install The Discovery Needs Intelligent Cargo Management The Land Rover Discovery 3 (LR3, 2004–2009) and Discovery 4 (LR4, 2010–2017) are exceptional expedition platforms, yet their load bays demand organisation. Whether you're stocking a first-aid kit, securing tools, or keeping emergency supplies at hand, loose items shift during off-road driving, compromising both safety and accessibility. This modular rear trunk storage shelf system transforms your Discovery's cargo area into a structured command centre. The high-grade aluminium construction provides rigid lateral support, whilst the side window bracket assembly keeps essential items within arm's reach. Each component integrates seamlessly with your Discovery's interior geometry—no drilling, no permanent modification, no compromise to resale value. Built in an ISO9001-certified facility and field-tested across continents, this storage solution is trusted by owners who refuse half-measures. Professional fitment takes less than 30 minutes. Your Discovery deserves better than improvisation. What's Included 📦 Rear Trunk Storage Shelf Rigid aluminium framework with load-bearing capacity ⬚ Side Window Storage Panel Secure mounting bracket for emergency / first-aid access 🔧 Installation Hardware All fixings and mounting brackets included 📖 Fitment Guide Clear step-by-step instructions for both Discovery generations Engineered Highlights High-grade aluminium alloy construction with black powder-coat finish Zero vibration or rattle under off-road terrain and laden driving Modular design permits partial or complete installation Does not obstruct rear visibility or load bay functionality Rated for repeated access and dynamic cargo shifts Weather-sealed joints resist moisture ingress and corrosion Accommodates standard first-aid kits and emergency recovery tools ISO9001 manufacturing standard ensures consistency and durability No permanent vehicle modification—fully reversible Fits both LR3 and LR4 platforms without adaptation Compatibility Matrix Model Generation Years Status Discovery 3 LR3 2004–2009 Direct Fit Discovery 4 LR4 2010–2017 Direct Fit Discovery 5 L462 2017+ Not Compatible Discovery Sport L550 2015+ Not Compatible Installation Overview Preparation: Open rear load bay. Locate existing attachment points along side walls and floor channels. Remove any loose trim if necessary. Shelf Assembly: Position main shelf framework onto load-bay floor. Align with vehicle's mounting bosses. Secure with provided stainless-steel fasteners—hand-tight is sufficient. Side Bracket Install: Mount window storage panel onto rear quarter panel bracket. Verify alignment before final tightening to ensure parallel fit. Hardware Torque: Tighten all fixings in a cross-pattern to prevent frame distortion. No power tools required—standard hex key and spanner suffice. Load Test: Load typical cargo (tools, recovery gear, first-aid box) and confirm no deflection, rattle, or movement under load. Final Check: Verify rear door closes smoothly with shelf installed. Ensure no obstruction to cargo access or rear visibility. Note: If your Discovery has non-standard interior trim or after-market loadliner installed, measure clearance before final assembly. Contact our team at +44 203 943 9919 if fitment uncertainty arises—we're here to help. Transform Your Discovery's Cargo Bay Organisation isn't luxury—it's expedition logic. Every tool, every kit, every spare part has its place. This aluminium storage system gives your Discovery 3 or 4 the structure it deserves. Shop Discovery 3 Accessories Shop Discovery 4 Accessories Use code 22GET20 for 20% off when you buy any 2 items. 4.9 / 5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL ✓ UK support: Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is an aftermarket accessory designed for compatibility; it is not an OEM component.

Victorious Automotive · Land Rover Discovery 4 / Range Rover Sport · Interior Trim Rear Air Outlet Vent Ring Cover Trim — Discovery 3 & 4 / Range Rover Sport L320 / LR3 & LR4 A subtle but immediately noticeable interior upgrade — silver ABS vent ring trims that replace the tired factory surrounds and bring a cleaner, more refined finish to your rear cabin vents. Discovery 3 · 2004–2009 Discovery 4 · 2010–2016 Range Rover Sport L320 · 2005–2013 LR3 · LR4 ABS Plastic Silver Finish Adhesive Fit Set of 2 ISO9001 Certified Overview The Land Rover Discovery 3, Discovery 4, LR3, LR4, and first-generation Range Rover Sport L320 all share a cabin that holds up remarkably well — but the rear vent surrounds are an area where age tends to show. Years of cleaning products, UV exposure, and general wear leave the original plastic rings looking dull, scratched, or mismatched against the rest of the interior. These Rear Air Outlet Vent Ring Covers are precision-cut from high-grade ABS plastic and finished in a clean silver tone that complements both dark and lighter interior colour schemes. They sit directly over the existing vent rings using a factory-strength double-sided adhesive, creating a seamless look with no drilling, no modification, and no permanent alteration to your vehicle. Whether you're refreshing a daily driver or detailing a vehicle ahead of sale, these covers are one of the most cost-effective ways to elevate the rear interior of your Discovery or Sport. Small in size, but impactful in result — exactly what a considered interior upgrade should be. What's Included 🔵 Rear Vent Ring Covers × 2 Silver ABS plastic, pre-cut to fit rear air outlets 🔲 Double-Sided Adhesive Pre-applied to rear of each cover for clean installation Product Highlights Precision-shaped to match rear vent ring dimensions on all compatible models High-grade ABS plastic construction — resistant to heat, flex, and cracking Silver finish complements chrome, brushed aluminium, and dark interior trims Pre-applied double-sided adhesive for a clean, tool-free installation Set of 2 covers — enough for both rear passenger air outlets ISO9001 factory certified — consistent quality across every unit 100% brand new — not reconditioned or remanufactured No drilling, cutting, or permanent modification required UV-stable finish to resist fading over time in direct sunlight Lightweight profile — no impact on vent airflow or function Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Direct Fit Land Rover LR4 L319 2010–2016 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  ·  🔧 Difficulty: Beginner Clean the existing rear vent ring surrounds thoroughly using an isopropyl alcohol wipe. Remove any dust, grease, or residue and allow to dry completely before proceeding. Hold the cover against the vent ring without removing the adhesive backing to confirm the alignment and fit before committing. Peel back the protective film from the double-sided adhesive on the rear of the cover. Position the cover carefully over the vent ring, starting from one edge. Press firmly and evenly across the full surface for 30–60 seconds to ensure a strong bond. Repeat the process for the second rear vent. Avoid cleaning or applying pressure to the covers for at least 24 hours to allow the adhesive to fully cure. ⚠ Note: Ensure the surface temperature of the vent ring is between 15°C and 35°C at the time of installation. Avoid fitting in very cold or damp conditions as this will significantly reduce adhesive performance. Browse More for Your Vehicle If you're upgrading the interior of your Discovery 3, Discovery 4, or Range Rover Sport L320, explore our full collections below: 🚙 Discovery 4 Accessories Interior, exterior & protection 🚙 Discovery 3 Accessories Interior, exterior & protection 🚙 Range Rover Sport L320 Interior upgrades & trim Upgrade Every Detail At Victorious Automotive, we stock interior and exterior accessories built specifically for Land Rover and Range Rover owners who don't settle. Free yourself from the ordinary — your cabin deserves better. Shop Discovery 4 Collection Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim ABS Silver Front Seat Belt Frame Cover Trim for Land Rover Discovery 4 LR4 & Range Rover Sport (2010–2016) A precision-fit interior trim upgrade that brings a clean, silver-accented finish to your Discovery 4 or Range Rover Sport's front seat belt surrounds — no cutting, no mess, no specialist tools required. Discovery 4 LR4 Range Rover Sport L320 2010–2016 ABS Plastic Silver Finish Adhesive Fit Interior Trim Set of 2 Overview The Land Rover Discovery 4 LR4 and second-generation Range Rover Sport L320 share an interior character defined by purposeful detailing — but the factory seat belt surrounds are an easy area to refresh. Over time, the standard plastic frames can look faded or simply feel out of place against a more refined or personalised cabin aesthetic. These ABS silver front seat belt frame cover trims are engineered to sit flush over the existing seat belt pillar frames, instantly lifting the look of the front cabin with a consistent metallic silver tone. The covers are formed from high-quality ABS plastic, laser-measured to match the original panel geometry of both the Discovery 4 and Range Rover Sport produced between 2010 and 2016. Installation uses pre-applied 3M-grade double-sided adhesive tape, making this a genuine five-minute job with zero risk to your original trim. Whether you're building out a full interior transformation or simply addressing a single detail, these covers deliver a proportionate, polished result that sits in keeping with the premium standard these vehicles were built to. What's Included 🪞 Front Seat Belt Frame Covers 2 pieces — driver & passenger side 🔧 Pre-Applied Adhesive 3M-grade double-sided tape pre-fitted 📦 Protective Packaging Individually wrapped to prevent transit damage Product Highlights Precision-moulded ABS plastic for exact panel fit Sleek silver finish complements factory chrome accents Pre-applied adhesive for tool-free installation Covers both driver and passenger seat belt frames Resistant to UV fading and cabin temperature changes Smooth surface finish — easy to keep clean Does not obstruct seat belt mechanism or operation Compatible with both LHD and RHD configurations Lightweight — adds no meaningful weight to the cabin Reversible installation — removable without trim damage Compatibility Vehicle Code Years Fit Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🛠 Difficulty: Beginner Clean the existing seat belt frame surrounds thoroughly using an isopropyl alcohol wipe. Ensure the surface is completely dry and free of dust, grease, or silicone-based products before proceeding. Dry-fit both covers against the seat belt frames before removing any adhesive backing. Confirm alignment and orientation on both the driver and passenger sides. Peel back the adhesive liner on one cover. Carefully position the trim piece against the seat belt frame, aligning all edges before making contact with the surface. Once correctly positioned, press firmly across the full surface of the cover for 20–30 seconds to ensure a strong adhesive bond. Repeat for the second piece. Allow 30–60 minutes before applying any pressure or stress to the newly fitted covers. Full adhesive cure is reached within 24 hours. ⚠ Note: Do not attempt installation in temperatures below 10°C — adhesive performance is significantly reduced in cold conditions. Avoid applying to surfaces recently treated with interior dressing or protectant sprays. Shop by Vehicle Looking to complement this trim with other interior upgrades? Browse the full curated accessory collections for your specific model below: 🚙 Discovery 4 LR4 2010–2016 accessories 🚙 Range Rover Sport L320 2005–2013 accessories 🚙 Discovery 5 2017–2024 accessories 🚙 Discovery 3 2004–2009 accessories Upgrade Your Discovery 4 Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-fit interior and exterior accessories. Worldwide shipping via DHL, FedEx, UPS and TNT — backed by our 30-day money-back guarantee. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL & FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 / Discovery 5 / Range Rover Vogue · Interior Trim ABS Black Cup Holder Trim – Land Rover Discovery 4, Discovery 5, Range Rover Vogue L405 & LR4 / LR5 Water Drinks Holder Surround A precision-moulded ABS replacement trim that restores a clean, factory-fresh finish to your centre console cup holder — designed specifically for Land Rover and Range Rover interiors. Discovery 4 (2010–2016) Discovery 5 (2017–2023) Range Rover Vogue L405 (2013–2020) Range Rover Sport L494 (2013–2020) ABS Plastic Gloss Black Direct Fit No Drilling Required Interior Trim Cup Holder Surround Overview The Land Rover Discovery 4 and Discovery 5 are known for their commanding presence and thoughtfully engineered interiors — but over time, the original cup holder trim surrounding the centre console drinks holder can become scuffed, scratched, or simply tired-looking. The same applies to Range Rover Vogue L405 and Range Rover Sport L494 models, where high-contact areas like the cup holder surround see daily wear from mugs, bottles, and road trip companions. This ABS black cup holder trim has been designed as a direct-fit replacement or upgrade for these specific Land Rover and Range Rover platforms. Moulded from high-grade ABS plastic, it replicates the precise contours of the factory surround while delivering a consistently clean, gloss-black finish that sits flush with the existing console architecture. Whether you're refreshing a tired interior or simply prefer a darker, more uniform aesthetic throughout the cabin, this trim delivers an immediate visual uplift. Unlike generic universal trims, this piece is shaped to match the exact profile of the Discovery 4 (LR4), Discovery 5 (LR5), and Range Rover Vogue / Sport centre console — ensuring there are no gaps, misalignments, or proud edges once installed. The result is a finish that reads as factory-fitted rather than aftermarket. What's Included 🖤 Cup Holder Trim Piece(s) Available as 1-piece or 2-piece set — select your preferred option above 📋 Fitting Guide Basic installation reference included in packaging 🔒 Secure Packaging Protective wrap to prevent transit damage to gloss finish ✅ 30-Day Guarantee Covered by Victorious Automotive's money-back assurance Product Highlights High-grade ABS plastic construction — resistant to heat, UV fading, and everyday knocks Gloss black finish integrates seamlessly with existing black interior trim and piano black detailing Direct-fit design engineered for Discovery 4, Discovery 5, Range Rover Vogue, and Sport platforms No drilling, cutting, or permanent modification required for installation Snap-fit or adhesive-backed fitment — tool-free for most variants Available in both 1-piece and 2-piece configurations to suit your console layout Precision-moulded edges ensure zero visible gaps or misalignment once fitted Lightweight addition — no impact on console mechanics or cup holder function Easy to clean and maintain — wipe-clean surface resists staining from drinks and daily use Refreshes and elevates the centre console area without a costly interior refurbishment Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 4 LR4 / L319 2010–2016 Direct Fit Land Rover Discovery 5 LR5 / L462 2017–2023 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L460 (2022+) 2022–2026 Not Compatible Range Rover Sport L461 (2022+) 2022–2026 Not Compatible Land Rover Defender L663 (2020+) 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Unsure whether this trim suits your exact build date or specification? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None (in most cases) Ensure your centre console and existing cup holder surround area are clean and free from dust, oils, or residue. A dry microfibre cloth works well for this step. If removing the original trim, gently work around the edges using a plastic trim removal tool to unclip any retaining tabs without marking the surrounding console surfaces. Dry-fit the new ABS trim piece first — align it with the cup holder aperture and press gently to confirm all edges seat flush before final installation. For snap-fit variants, apply firm, even pressure around the perimeter until you feel or hear the retaining clips engage. For adhesive-backed versions, remove the backing film and press firmly for 30 seconds. Step back and inspect all four edges for uniformity. The trim should sit completely flush with no lifting corners or visible gaps. ⚠ Important: Always confirm your exact model year and console configuration before fitting. Console layouts can vary slightly between early and late production runs within the same generation. If in doubt, contact us before beginning installation. Shop By Vehicle Looking for more interior upgrades for your Land Rover or Range Rover? Browse our full curated collections below: 🚙 Discovery 4 Accessories LR4 · 2010–2016 🚙 Discovery 5 Accessories LR5 · 2017–2023 🏆 Range Rover Vogue L405 2013–2020 🏆 Range Rover Sport L494 2013–2020 Interior Details That Set Your Land Rover Apart At Victorious Automotive, we stock only parts we'd fit to our own vehicles. Every trim, accessory, and upgrade in our range is selected for quality, fitment precision, and longevity — because your Land Rover deserves nothing less. Shop Discovery 4 Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, authorised by, or in any way connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover · Interior Trim Black ABS Seat Adjustment Switch Knob Cover Trim for Land Rover Discovery 4, Range Rover Sport & Evoque (2014–2021) A precision-fit interior trim upgrade that refreshes your seat control area with a clean, cohesive black finish — no tools, no fuss. Discovery 4 Range Rover Sport L494 Range Rover Evoque L538 2014–2021 ABS Plastic Gloss Black Adhesive Fit Interior Trim 2-Piece Set Overview The Land Rover Discovery 4, Range Rover Sport (L494), and Range Rover Evoque (L538) are vehicles built around capability and refinement in equal measure. Their interiors are designed to feel purposeful and premium — and even the smallest details contribute to that experience. The seat adjustment switch area, used daily by every driver and passenger, is one of those details that often goes overlooked until it starts to look tired or out of place. These Black ABS Seat Adjustment Switch Knob Cover Trims are designed specifically to overlay the existing switch surrounds, bringing a uniform gloss black appearance to the seat control zone. Manufactured from high-quality ABS plastic, they're rigid enough to hold their form and refined enough to blend seamlessly with the surrounding trim — whether your interior is already dark or you're gradually building a blacked-out aesthetic. Installation is as straightforward as it gets. Each piece is pre-fitted with a strong double-sided adhesive backing, meaning there's no drilling, no clips to lose, and no risk of damaging the underlying switchgear. Clean the surface, peel, press, and the transformation is immediate. It's the kind of upgrade that rewards attention to detail — subtle when you want it to be, and noticed by those who know what to look for. What's Included 🪑 Seat Switch Knob Cover × 2 Matched pair, one per seat side 🔲 Pre-Applied Adhesive Backing Strong double-sided tape, factory-applied 📦 Protective Packaging Secure transit packaging to prevent surface damage Product Highlights High-grade ABS plastic construction — durable, lightweight and resistant to daily wear Gloss black finish for a sleek, unified interior aesthetic Custom-profiled to fit the seat adjustment switch zone precisely Pre-applied double-sided adhesive — no tools or modifications required Covers minor scuffs, scratches or discolouration on existing switch surrounds Pairs naturally with other blacked-out interior trim upgrades Supplied as a 2-piece set — covers both driver and passenger seat controls 100% brand new — not a refurbished or reconditioned part Lightweight design adds no perceptible bulk to the seat panel Suitable for right-hand and left-hand drive models with compatible switch layout Compatibility Model Code Year Range Fit Land Rover Discovery 4 L319 2014–2016 Direct Fit Range Rover Sport L494 2014–2021 Direct Fit Range Rover Evoque L538 2014–2019 Direct Fit Range Rover Evoque L551 2019–2021 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Land Rover Discovery 5 L462 2017–2026 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Time: 10–15 Minutes  |  🔧 Tools Required: None Begin with the vehicle interior at room temperature if possible. Cold surfaces can reduce initial adhesive bond strength. Thoroughly clean the existing seat adjustment switch surround using an isopropyl alcohol wipe. Remove any dust, oils or residue and allow to dry completely for 2–3 minutes. Dry-fit each cover trim against the switch area before committing to adhesion — confirm alignment and positioning with the switch profile. Peel the protective film from the double-sided adhesive backing on the first trim piece, taking care not to touch the adhesive surface. Align the trim carefully over the switch surround and press firmly into position. Apply steady pressure across the full surface for 20–30 seconds. Repeat for the second trim piece. Avoid operating the seat adjustment switches for at least 1 hour to allow the adhesive to fully cure. ⚠ Note: Ensure the adhesive surface is not contaminated before application. Once bonded, removal may leave adhesive residue. Always confirm your exact seat switch layout matches the product profile before purchase — switch positions can vary between trim levels and production dates within the same model range. Complete Your Interior Browse the full range of Discovery 4, Range Rover Sport and Evoque interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Discovery 4 Accessories Shop Range Rover Sport L494 Shop Range Rover Evoque L538 Buying 2 or more items? Use code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle codes referenced are used solely for fitment identification purposes. Product compatibility should be verified against your specific vehicle's trim level and production date prior to purchase.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Land Rover Discovery 4 ABS Black Wood Grain Dashboard Storage Box & Switch Cover Sticker (2010–2016) A precision-crafted ABS trim piece that brings a refined, dark wood grain aesthetic to the Discovery 4's centre dashboard — fitted in minutes, no drilling required. Discovery 4 L319 2010–2016 ABS Plastic Black Wood Grain Dashboard Trim Storage Box Cover Switch Panel Sticker No-Drill Fit Interior Upgrade Overview The Land Rover Discovery 4 (L319) built its reputation on genuine capability paired with a surprisingly well-appointed interior. Produced from 2010 through to 2016, it remains one of the most respected and widely used large SUVs on the road — equally at home on a muddy farm track as it is outside a hotel. Owners who love their Discovery 4 want the interior to match the quality they feel every time they climb behind the wheel. This ABS black wood grain dashboard storage box and switch cover sticker is designed specifically for the Discovery 4's centre console and dashboard area. It overlays the existing trim around the storage box and switch panel with a rich, dark wood grain finish, adding visual depth and a premium character that pairs naturally with the D4's leather seating and dark cabin materials. The finish is consistent, even, and holds up well to daily use. Made from high-grade ABS plastic — not a thin vinyl wrap — this piece retains its shape and finish over time. The pre-applied double-sided adhesive ensures a firm, rattle-free bond to the factory trim surface, meaning no modifications, no fuss, and a result that looks considered rather than fitted as an afterthought. What's Included 🪵 Dashboard Storage Box & Switch Cover Sticker 1 piece — ABS black wood grain finish, pre-applied adhesive backing 📄 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Precision-moulded ABS plastic — rigid, durable, and dimensionally accurate Authentic black wood grain texture with consistent depth and finish Designed and cut specifically for the Discovery 4 dashboard layout Pre-applied double-sided adhesive — clean, permanent, rattle-free bond No drilling, cutting, or modifications to your factory trim required Covers the storage box and switch panel area for a unified look Resistant to UV fading, heat, and everyday wear Manufactured in an ISO 9001 certified facility Complements dark leather interiors and factory dark trim perfectly Tool-free installation completable in under 30 minutes Compatibility Vehicle Code Years Fit Land Rover Discovery 4 SE L319 2010–2016 Direct Fit Land Rover Discovery 4 HSE L319 2010–2016 Direct Fit Land Rover Discovery 4 XS L319 2010–2016 Direct Fit Land Rover Discovery 4 Graphite L319 2013–2016 Direct Fit Land Rover Discovery 3 L319 (early) 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–present Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 15–30 minutes  ·  🛠 Tools Required: None Begin with the vehicle parked and the cabin at room temperature — avoid fitting in very cold or very hot conditions as this affects adhesive performance. Thoroughly clean the existing dashboard trim surface around the storage box and switch panel using an isopropyl alcohol wipe. Remove any dust, grease, or fingerprints and allow to dry fully. Test-fit the cover sticker against the trim panel without removing the adhesive backing — confirm alignment with all switch cutouts and storage box aperture. Once satisfied with the alignment, carefully peel back a small section of the adhesive backing and position one edge accurately against the trim. Slowly peel away the remaining backing while pressing the cover down firmly and evenly, working from one end to the other to avoid trapping air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds. Pay particular attention to edges and corners. Allow the adhesive to cure for at least 2 hours before operating switches or opening the storage box lid. ⚠ Note: Do not apply cleaning products directly to the wood grain surface after fitting — use a dry or very lightly dampened microfibre cloth only. Avoid using any solvent-based cleaners as these may damage the finish over time. Upgrade Your Discovery 4 Interior Today Small changes make a meaningful difference inside a vehicle you use every day. This dashboard trim piece is one of the simplest ways to refresh the Discovery 4's cabin and give it a more intentional, premium feel — without touching a single bolt. Shop All Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.