Victorious · Cooling System · Engine Gasket
Engine Water Pump Gasket & Connector – Discovery LR4, Range Rover Sport & Jaguar XF/XJ/XE/XK
OE-spec gasket replacement and connector assembly for 3.0L V6 and 5.0L V8 engines—direct fit, 12-month warranty, ships worldwide.
Discovery 4 (2010–2016)
Range Rover Sport (2010–2017)
Range Rover (2010–2017)
Jaguar XF/XJ/XE/XK
3.0L V6 & 5.0L V8
OE Part Numbers
Warranty Included
Overview
If you own a Land Rover Discovery 4, Range Rover Sport, Range Rover Vogue, or corresponding Jaguar model with a 3.0L V6 or 5.0L V8 engine, cooling system integrity depends on a reliable water pump gasket. Over time, factory gaskets can degrade, leading to seepage, overheating, and costly engine damage. This OE-spec gasket and connector assembly restores full cooling performance and stops mid-engine leaks before they escalate.
Victorious supplies two gasket options—Type A and Type B—both engineered to match original Land Rover and Jaguar specifications. Each variant carries the factory part numbers LR049370, LR011562, AJ811612, and AJ813609, ensuring drop-in compatibility. We also offer an optional water pump connector (LR028136) with aluminum or plastic variants, allowing a full cooling package if your connector shows age.
Installation is straightforward for owners with basic mechanical confidence; most jobs complete in under 2 hours. All orders include a 12-month parts warranty and worldwide shipping via DHL, FedEx, or UPS. Victorious stands behind every gasket with a 30-day money-back guarantee.
What's Included
⚙️
Water Pump Gasket (×2)
OE-spec LR049370, AJ813609. Matched pair for redundancy and future service.
🔗
Connector Assembly (Optional)
Water pump connector LR028136 with O-ring seal. Plastic or aluminum variant—choose your set.
📋
Installation Guide
Step-by-step fitment instructions and torque specifications for safe assembly.
✅
12-Month Warranty
Full parts replacement guarantee. Covers manufacturing defects and premature failure.
Product Highlights
-
OE-Spec Quality. Meets or exceeds original equipment standards for pressure retention and thermal stability.
-
Dual Gasket Pair. Two gaskets included—one for immediate replacement, one as a backup for future maintenance cycles.
-
Seamless Fitment. Direct replacement. No modifications, adapters, or workarounds required.
-
Engine Compatibility. Engineered for 3.0L V6 SuperCharged and 5.0L V8 naturally aspirated powerplants.
-
Optional Connector Assembly. Upgrade to a full cooling package with plastic or aluminum connector and new O-ring seal.
-
Factory Part Numbers. Matches LR049370, LR011562, AJ811612, AJ813609 for verification and peace of mind.
-
12-Month Warranty. Complete parts replacement guarantee covering all manufacturing defects.
-
Premium Packaging. Secure, branded Victorious packaging ensures parts arrive in pristine condition.
-
Global Shipping. DHL, FedEx, UPS, and TNT options to over 200 countries. Tracking included.
-
Expert Support. UK-based team ready to assist with fitment questions. Phone: +44 203 943 9919 (Mon–Fri 9am–7pm).
Compatibility
| Vehicle & Model Code |
Engine |
Years |
Fit |
| Land Rover Discovery 4 (LR4) |
3.0L V6, 5.0L V8 |
2010–2016 |
Direct Fit |
| Range Rover Vogue L405 |
3.0L V6, 5.0L V8 |
2010–2017 |
Direct Fit |
| Range Rover Sport L494 |
3.0L V6, 5.0L V8 |
2010–2017 |
Direct Fit |
| Jaguar XF (J11, J15) |
3.0L V6, 5.0L V8 |
2010–2017 |
Direct Fit |
| Jaguar XJ (X351) |
3.0L V6, 5.0L V8 |
2010–2017 |
Direct Fit |
| Jaguar XE (X260) |
3.0L V6, 5.0L V8 |
2015–2017 |
Direct Fit |
| Jaguar XK (X150) |
5.0L V8 |
2010–2015 |
Direct Fit |
| Jaguar XKR / XKR-S |
5.0L V8 |
2010–2015 |
Direct Fit |
| Jaguar XFR / XFR-S |
5.0L V8 |
2010–2015 |
Direct Fit |
| Jaguar XJR |
5.0L V8 |
2014–2017 |
Direct Fit |
Note: Verify your engine displacement (3.0L or 5.0L) and VIN before ordering. If unsure, contact us at +44 203 943 9919 with your registration plate or VIN.
Installation Notes
Difficulty: Moderate | Time: 1.5–2.5 hours
-
Prepare the engine. Allow a full cool-down after running. Remove the accessory belt and front covers to access the water pump housing.
-
Drain coolant (optional). For minimal spillage, you may drain the cooling system into a clean container. Otherwise, have towels ready to catch small spillage.
-
Remove the old gasket. Unbolt the water pump housing using the correct socket size (typically 8 or 10 mm). Carefully peel away the old gasket and clean the mating surface with a lint-free cloth.
-
Inspect the housing. Check for warping, pitting, or scored surfaces. If damage is evident, have the housing re-faced by a machine shop before proceeding.
-
Install the new gasket. Position the fresh OE-spec gasket onto the pump body. Ensure no twisting or misalignment. Re-apply fasteners and torque to 18–22 Nm in a cross-pattern.
-
Refill coolant. Top up the expansion tank to the maximum mark. Bleed air from the system by running the engine at idle for 2–3 minutes with the heater on full.
-
Check for leaks. Allow the engine to cool fully, then inspect the gasket seam for any seepage. Test-drive for 10 minutes and recheck.
-
Dispose of old gasket responsibly. Take the old gasket and any old coolant to a local recycling facility or auto parts shop.
⚠️ Important: Always allow the engine to cool completely before removal. Hot coolant can cause severe burns. If you are unfamiliar with engine work, we recommend professional installation by a Land Rover or Jaguar specialist.
Why Choose Victorious
We specialise in Land Rover, Range Rover, and Jaguar cooling components. Our team has over a decade of experience sourcing and testing OE-spec parts. Every gasket undergoes rigorous pressure and thermal testing before shipment. We do not compromise on quality—your engine's longevity depends on it.
Premium customer support. Stuck on fitment? Need to confirm compatibility? Call +44 203 943 9919 Monday to Friday, 9am–7pm GMT. Our advisors will walk you through installation, verify part numbers, or arrange a return—no questions asked.
30-day money-back guarantee. Order with confidence. If the gasket does not fit or you change your mind, we refund your purchase price in full within 30 days of delivery. Shipping is your responsibility for returns.
Ready to Restore Cooling Integrity?
Stop cooling leaks before they damage your engine. Order your OE-spec gasket and connector assembly today. Free worldwide shipping on all orders.
Add to Cart
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 — 12,300+ verified reviews
🚚 DHL, FedEx, UPS — Worldwide shipping
✅ 30-day — Money-back guarantee
📞 +44 203 943 9919 — UK support team
Victorious Automotive is not affiliated with Jaguar Land Rover Ltd., Land Rover, Range Rover, Discovery, Defender, or any other JLR marque. All product names, logos, and trademarks are the property of their respective owners. This product is designed as an aftermarket replacement and is not an official OEM part, although it meets or exceeds OE specifications. Always verify fitment with your vehicle's VIN or registration details before purchase.
