Victorious · Land Rover / Range Rover / Jaguar · Engine Sensors
3.0L V6 Intake Manifold Pressure Sensor – LR077148 / T4A12211
OEM-specification MAP sensor for Land Rover, Range Rover Sport, Discovery, Velar, and Jaguar 3.0L engines – restores engine management accuracy and fuel efficiency.
LR077148 / T4A12211
Discovery 4 / LR4
Range Rover L4 2013+
Range Rover Sport 2014+
Discovery 5 2017+
Range Rover Velar 2017+
Jaguar XJ / XF / F-PACE
3.0L V6 Diesel & Turbo
Direct Fit
New / OEM Quality
Overview
The intake manifold absolute pressure (MAP) sensor is the engine control module's eyes into combustion chamber conditions. On your Discovery 4, Range Rover Vogue, Range Rover Sport, Velar, Discovery 5, and Jaguar XJ/XF/F-PACE 3.0L V6 engines—whether diesel or turbocharged gasoline—this sensor measures boost pressure and induction air density in real-time to optimise fuel injection timing, ignition advance, and emissions control.
A failing MAP sensor triggers high fuel consumption, hesitant throttle response, rough idle, and the check engine light. This is the genuine OEM-specification replacement (part numbers LR077148 / T4A12211) engineered to Land Rover and Jaguar factory tolerances. It restores precise engine management without adaptation or recalibration.
Partsmost brand quality, backed by a 12-month warranty and tested for 5V operating voltage stability. Direct fit to the throttle body junctions and intake manifold ports specified in your vehicle's diagnostic manual.
What's Included
📦
Intake Manifold Pressure Sensor
OEM-spec T4A12211 / LR077148 unit
📋
Installation Guide
Land Rover / Jaguar specific procedure
✓
12-Month Warranty
Full replacement guarantee included
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT available
Product Highlights
-
Genuine OEM Part Numbers: LR077148 / T4A12211 (no remanufactured units)
-
5V Operating Voltage: Stable output for precise ECU communication
-
Direct Fit Application: No adaptation, recoding, or throttle body replacement required
-
3.0L V6 Compatible: Diesel, turbocharged gasoline, supercharged engines
-
Boost Pressure Accuracy: Compensates for altitude, temperature, load conditions
-
Fuel Economy Restoration: Prevents rich running and fuel delivery errors
-
Emissions Control: Maintains EGR and DPF operation efficiency
-
Factory Tolerance: Engineered to Land Rover / Jaguar OEM specifications
-
Proven Reliability: Partsmost quality, tested batch certification
-
12-Month Full Warranty: Replacement guarantee if defect occurs
Compatibility Table
| Vehicle / Engine |
Years |
Engine Type |
Fit |
| Land Rover Discovery 4 / LR4 |
2010–2016 |
3.0L V6 Diesel |
Direct Fit |
| Range Rover Vogue (L4) |
2013–2020 |
3.0L V6 Diesel / Supercharged |
Direct Fit |
| Range Rover Sport (L494) |
2014–2022 |
3.0L V6 Diesel / Supercharged |
Direct Fit |
| Land Rover Discovery Sport |
2015–2022 |
3.0L V6 Diesel (Select) |
Direct Fit |
| Land Rover Discovery 5 |
2017–Present |
3.0L V6 Diesel / Turbo |
Direct Fit |
| Range Rover Velar |
2017–2022 |
3.0L V6 Diesel / Turbo |
Direct Fit |
| Jaguar XJ |
2010–2019 |
3.0L V6 Diesel |
Direct Fit |
| Jaguar XF (AL) |
2016–Present |
3.0L Turbo Diesel |
Direct Fit |
| Jaguar F-PACE |
2016–Present |
3.0L Turbo Diesel |
Direct Fit |
| Range Rover Evoque (L538 / L551) |
2011–Present |
2.0L Turbo (Select models only) |
Not Compatible |
Before purchase: Confirm your part number by checking your existing MAP sensor, or provide your VIN to our team. Call +44 203 943 9919 (Mon–Fri 9am–7pm) to verify fitment.
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
- Disconnect the negative battery terminal and allow the engine to cool completely.
- Locate the MAP sensor mounted on the intake manifold or throttle body (refer to your engine bay diagram).
- Disconnect the electrical connector by pressing the tab and gently pulling away.
- Unscrew the retaining bolt (usually 10mm or Torx) and carefully remove the old sensor.
- Clean the sensor bore and O-ring seat with a soft, dry cloth. Do not use solvents or compress air directly into the port.
- Install the new sensor, ensuring the O-ring is seated correctly and free of debris.
- Torque the retaining bolt to 8–12 Nm (6–9 lb-ft). Do not over-tighten; plastic housing can crack.
- Reconnect the electrical connector until you hear a click.
- Reconnect the battery terminal and start the engine. The check engine light should clear within 2–3 cold-start cycles.
- If the light persists after 50 miles of mixed driving, clear the fault code using an OBD2 scanner (generic P0103, P0104 codes).
Critical: Do not touch the sensor diaphragm or insert any tools into the sensor bore. Do not apply silicone sealant or thread-locker to the bolt; use only the factory bolt with an integral washer.
Ready to Restore Engine Precision?
This OEM-specification MAP sensor returns your Discovery, Range Rover, Velar, or Jaguar to factory engine management performance. Quick installation, guaranteed fit, 12-month warranty.
Shop Now
Use code 22GET20 for 20% off any 2 items.
4.9/5 – 12,300+ Verified Reviews
30-Day Money-Back Guarantee
Worldwide DHL / FedEx / UPS Shipping
Expert Support – +44 203 943 9919
Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar, or Tata Motors. All brand names, logos, and vehicle designations are the property of their respective owners. This product is an aftermarket OEM-specification part and is not manufactured by or endorsed by Land Rover or Jaguar Land Rover plc. 12-month warranty covers manufacturing defect only; labour, diagnostics, or vehicle downtime are not covered. Installation at a qualified Land Rover or independent specialist workshop is recommended.
