منتجات

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS B Pillar Hook Cover Trim Stickers for Land Rover Discovery Sport 2015–2019 A precision-cut, silver ABS trim upgrade that conceals the factory B pillar coat hooks and brings a clean, cohesive finish to your Discovery Sport's interior — no tools required. Discovery Sport 2015–2019 L550 ABS Plastic Silver Finish B Pillar Trim Hook Cover No-Tool Fit Interior Upgrade Direct Fit Overview The Land Rover Discovery Sport (L550) is built around a refined, practical cabin designed to accommodate everyday life without sacrificing quality. The B pillar area, home to the factory coat hooks, is one of those small details that the keenest owners notice — and when left uncovered, the hook surround can look unfinished against the rest of the interior's considered design. These silver ABS B Pillar Hook Cover Trim Stickers are engineered specifically for the Discovery Sport produced between 2015 and 2019. Each cover is precision-shaped to sit flush over the existing hook housing, creating a smooth, silver-accented detail that complements both dark and light interior colour schemes. The high-quality ABS plastic construction resists flexing, fading, and everyday wear — so they'll stay looking sharp for the long haul. Installation takes only a matter of minutes. A factory-grade double-sided adhesive backing is pre-applied to each cover, meaning no drilling, no clips, and no risk of damaging your existing trim. For Discovery Sport owners who prefer their cabin to reflect the same attention to detail as the rest of the vehicle, this is a simple, effective, and affordable upgrade. What's Included 🪝 B Pillar Hook Cover Trim (x2) One for each rear B pillar — left and right sides 🔲 Pre-Applied Adhesive Double-sided tape pre-fitted to each cover — ready to install 📄 Installation Guidance Simple step-by-step fitment instructions included Product Highlights Precision-engineered profile designed specifically for the Discovery Sport L550 B pillar hook housing High-quality ABS plastic construction — impact-resistant and built to last Silver finish adds a refined, cohesive accent to your vehicle's interior trim Pre-applied factory-grade double-sided adhesive for fast, tool-free installation Covers the existing hook surround cleanly with no visible gaps or lifting edges Compatible with both standard and upgraded Discovery Sport interiors from 2015 to 2019 Resistant to UV fading, heat, and everyday interior wear Lightweight design — zero additional weight burden on the B pillar area Reversible upgrade — can be removed carefully without damaging the original trim Supplied as a matched pair so both sides of the cabin are finished identically Compatibility Vehicle Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 2020 – 2024 (Facelift) Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin by thoroughly cleaning the B pillar hook housing area on both sides of the cabin. Use an alcohol-based cleaner or panel wipe to remove any dust, grease, or residue. Allow the surface to dry completely before proceeding. Test-fit each cover without removing the adhesive backing, holding it in position to confirm alignment and coverage over the hook surround. Peel back the adhesive liner from the first cover, taking care not to touch the adhesive surface with your fingers. Align the cover carefully over the hook housing and press it firmly into position, working from the centre outward to avoid air pockets. Apply firm, even hand pressure across the entire cover for 30–60 seconds to ensure full adhesive contact. Repeat for the second cover on the opposite B pillar. Allow the adhesive to cure for at least 24 hours before placing any load or stress on the covers. ⚠ Important: Do not install in cold conditions below 10°C / 50°F — adhesive performance is significantly reduced in low temperatures. If your vehicle has been parked in the cold, bring it to room temperature before fitting. Ensure the surface is completely dry; any moisture will compromise the bond. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — from dashboard trim and centre console upgrades to door handle covers and storage solutions. Every product is selected for fit, finish, and long-term quality. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Silver ABS Seat Adjustment Frame Trim Cover Sticker — Land Rover Discovery 4 LR4 (2010–2016) A precision-cut silver trim cover that refreshes the seat adjustment frame area of your Discovery 4, delivering a cleaner, more polished cabin aesthetic with zero tools required. Discovery 4 / LR4 2010–2016 ABS Plastic Silver Finish Interior Trim Adhesive Fit Set of 2 No Drilling Overview The Land Rover Discovery 4 — known globally as the LR4 — remains one of the most capable and characterful SUVs ever produced. Built between 2010 and 2016, it earned a devoted following among those who demand both off-road performance and a refined cabin experience. For owners who continue to cherish and maintain these vehicles, keeping the interior looking sharp is every bit as important as what happens beneath the bonnet. Over time, the seat adjustment frame area of the Discovery 4 can show its age — scuffs, wear marks, and faded plastics that detract from an otherwise well-appointed cabin. These silver ABS seat adjustment frame trim covers are designed to sit flush over the existing surround, masking wear and introducing a smart, contemporary silver finish that integrates naturally with the Discovery 4's interior colour palette. Constructed from durable ABS plastic and finished in a clean, understated silver tone, these covers require no drilling, no specialist tools, and no professional fitting. The pre-applied double-sided adhesive backing ensures a secure, rattle-free bond in minutes — making this one of the most impactful quick upgrades you can make to the LR4 interior. What's Included 🪑 Seat Adjustment Trim Cover × 2 Silver ABS plastic covers for left and right seat frames 🔲 Pre-Applied Adhesive Backing 3M-style double-sided tape bonded to each cover 📋 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-cut to match the Discovery 4 seat adjustment frame profile exactly High-quality ABS plastic — impact-resistant and built to last Silver finish complements both light and dark Discovery 4 interior trims Pre-applied double-sided adhesive for a fast, tool-free installation Covers surface wear, scuffs and faded plastics on the seat frame surround Rattle-free fitment when adhesive is properly bonded to a clean surface Set of 2 covers — fits both driver and front passenger seat frames Lightweight construction adds no meaningful weight to the interior Does not interfere with seat adjustment mechanism operation Reversible — can be removed without permanent modification to the vehicle Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 4 / LR4 (Facelift) L319 2013–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Verify Before Purchase Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes 🛠 Difficulty: Beginner  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry cabin — ensure the seat adjustment frame area is free from dust, grease, and moisture. Use an isopropyl alcohol wipe for best adhesion results. Dry-fit each trim cover against the seat frame before committing — confirm the profile aligns correctly with no gaps or overhangs on either side. Peel back the protective film from the adhesive side of one trim cover, taking care not to touch the adhesive surface. Align the cover carefully over the seat frame surround, pressing firmly from the centre outward to eliminate any air pockets beneath the surface. Apply firm, even pressure for 30–60 seconds across the full face of the cover to ensure the adhesive bonds securely. Repeat the process for the second cover on the opposite seat frame. Allow 24 hours for the adhesive to fully cure before operating the seat adjustment mechanism repeatedly. ⚠ Note: Surface temperature affects adhesive performance. Do not install in direct sunlight or when the interior surface temperature is above 35°C. For best results, install in a shaded environment at room temperature. Ensure the adhesive area is fully dry before application. Explore More Discovery 4 Upgrades Browse the full Victorious Discovery 4 collection — from interior trim enhancements to exterior accessories, every product is selected for fit, finish, and long-term quality. Shop Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, vehicle model names, and codes referenced are used solely for compatibility identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Center Console Navigation Frame Button Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-fit silver ABS trim panel that frames the center console navigation controls of your Discovery Sport, instantly elevating the interior's visual detail with a clean, factory-complementary finish. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish No-Drill Install Double-Sided Adhesive 2-Piece Set Interior Upgrade Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that balances everyday practicality with genuine character — and its interior reflects that. The centre console area, housing the navigation controls and surrounding button cluster, is one of the most visually prominent zones in the cabin. Over time, the stock plastic surround can look flat or worn, particularly against an otherwise refined interior. This silver ABS Navigation Frame Button Cover Trim is engineered specifically for the Discovery Sport's 2015–2019 centre console layout. Precision-cut to follow the exact contours of the button surround, each piece sits flush against the factory trim with no gaps, no rocking, and no proud edges. The silver finish introduces a subtle metallic quality that catches ambient light without being ostentatious — the kind of detail that looks considered rather than aftermarket. Made from high-grade ABS plastic, the trim is resistant to UV yellowing, temperature cycling, and the daily wear that comes from frequent contact. Installation requires no tools, no drilling, and no modification to the original panels — just a clean surface and a confident press. It's one of the most impactful low-effort interior upgrades available for the Discovery Sport at this model year range. What's Included 🪟 Navigation Frame Trim Panel × 2 Left and right centre console button surround covers, silver ABS finish 🔲 Pre-Applied Adhesive Backing Double-sided 3M-style tape pre-fitted to each panel for immediate installation 📋 Installation Guide Step-by-step fitting reference included with the set Product Highlights Precision-cut ABS panels designed specifically for the Discovery Sport 2015–2019 console layout Silver finish complements both light and dark interior colour schemes without clashing High-grade ABS construction — resistant to heat, UV fading, and surface wear Pre-applied double-sided adhesive for a confident, tool-free installation Flush-fit profile sits level with factory trim for a factory-integrated appearance 2-piece set covers the full navigation frame button surround area Lightweight panels add no perceptible weight or bulk to the console area 100% brand new — individually inspected before dispatch Reversible upgrade — can be cleanly removed without damaging OEM trim Worldwide shipping via DHL, FedEx, UPS, and TNT with tracked delivery Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Land Rover Freelander 2 L359 2006 – 2014 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–20 minutes  |  🔧 Tools Required: None Start with the engine off and the interior at room temperature. Ensure the centre console area is clean, dry, and free of any dust, oils, or residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit both trim panels onto the navigation frame button surround before removing the adhesive backing. Confirm the alignment and fit are correct before committing. Peel the protective liner from the pre-applied adhesive on the back of the first panel. Take care not to touch the adhesive surface. Carefully position the panel against the console surround, starting from one edge. Press firmly and evenly across the full surface for 20–30 seconds to activate the adhesive bond. Repeat the process for the second panel, ensuring both pieces align symmetrically across the console. Allow the adhesive to fully cure for a minimum of 2–4 hours before applying any pressure or cleaning products to the trim area. ⚠ Note: Do not install in cold conditions below 10°C — adhesive performance is significantly reduced at low temperatures. Ensure the OEM trim surface is fully dry before application. If removal is ever required, use a plastic trim removal tool and apply gentle, even pressure to avoid marking the original panel. Upgrade Your Discovery Sport Interior Explore the full range of Land Rover Discovery Sport interior accessories at Victorious Automotive — curated for owners who take their vehicles seriously. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle trim level and build date before purchase.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Gear Shift Frame Cover Trim Sticker for Land Rover Discovery Sport (2015–2019) A precision-fit silver trim sticker that instantly elevates the centre console of your Discovery Sport — clean, sharp, and built to last. Discovery Sport L550 2015–2019 High-Grade ABS Plastic Silver Finish Gear Shift Trim No Drilling Required Direct Fit Interior Accessory Overview The Land Rover Discovery Sport is a machine built for those who refuse to compromise — capable on any terrain, yet refined enough for every day. Its interior deserves the same attention to detail that went into engineering the rest of the vehicle. Over time, the gear shift surround area can begin to look worn or simply feel uninspired against the rest of the cabin's design language. This trim sticker addresses that directly. Crafted from high-grade ABS plastic with a smooth silver finish, this gear shift frame cover is designed to sit flush against the existing centre console surround on 2015–2019 Discovery Sport models. The surface finish is consistent and reflective without being garish — it complements the factory interior rather than competing with it. Whether your Discovery Sport features a light or dark interior, the neutral silver tone integrates naturally with the surrounding switchgear and materials. Installation requires no specialist tools, no drilling, and no modification to the original interior. A pre-applied double-sided adhesive backing bonds cleanly to the OEM surface, providing a firm, rattle-free hold. It's the kind of upgrade that looks factory-fitted the moment it's in place — exactly as it should be. What's Included 🎛️ Gear Shift Frame Cover Trim 1 × silver ABS sticker trim, pre-cut and adhesive-ready 🔲 Pre-Applied Adhesive Backing Double-sided tape bonded to the rear of the trim panel Product Highlights Precision-cut to match the gear shift frame on 2015–2019 Discovery Sport models High-grade ABS plastic — resistant to heat, UV fading, and daily wear Polished silver finish complements both light and dark Discovery Sport interiors Pre-applied double-sided adhesive for a secure, rattle-free bond No drilling, cutting, or specialist tools required for installation Covers minor scuffs, scratches, or wear on the original gear surround Slim profile sits flush with surrounding trim for a factory-fitted appearance Does not interfere with gear selector operation or surrounding controls 100% brand new — supplied in protective packaging to prevent transit damage Worldwide delivery available via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim / Variant Fitment Land Rover Discovery Sport L550 2015–2019 SE, HSE, HSE Luxury Direct Fit Land Rover Discovery Sport L550 2015–2019 Dynamic, Black Edition Direct Fit Land Rover Discovery Sport L550 2020–2024 (Facelift) All Variants Not Confirmed Land Rover Discovery 5 L462 2017–2024 All Variants Not Compatible Range Rover Evoque L538 2011–2018 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the vehicle interior is at room temperature. Cold surfaces can reduce adhesive effectiveness — avoid installation in temperatures below 10°C. Thoroughly clean the existing gear shift frame surround using an isopropyl alcohol wipe or a lint-free cloth with interior cleaner. Remove all dust, grease, and residue. Allow to dry completely. Dry-fit the trim piece over the gear shift frame without removing the adhesive backing. Confirm the alignment and check that all edges sit flush with the surrounding interior surfaces. Peel back a small section of the adhesive backing and carefully position one edge of the trim against the gear shift frame, using your dry-fit reference points to guide placement. Press the trim firmly into place, working from one side to the other to eliminate any air pockets. Apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before subjecting the trim to heavy use or cleaning. ⚠ Note: Do not attempt to reposition the trim once the adhesive has made full contact with the surface. If adjustment is needed, act immediately before the bond sets. Avoid using harsh chemical cleaners directly on the trim surface, as these may affect the finish over time. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — each piece selected and tested to meet the standards Discovery Sport owners expect. Shop Discovery Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim Silver ABS Rear Tail Light Lamp Frame Trim Cover for Land Rover Discovery Sport 2015–2019 A precision-finished set of silver ABS tail light surrounds that instantly sharpens the rear exterior of your Discovery Sport with a cleaner, more purposeful look — no modification required. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Exterior Trim Tail Light Frame Adhesive Fit Set of 4 Overview The Land Rover Discovery Sport L550 occupies a unique position in the modern SUV landscape — capable enough to carry the Discovery name, refined enough to rival the premium compact class. Owners who choose a Discovery Sport tend to care about every detail, and the rear of the vehicle is no exception. The factory tail light area, while functional, is an opportunity for a subtle but meaningful visual upgrade. These silver ABS rear tail light lamp frame trim covers are designed specifically for the 2015–2019 Discovery Sport facelift range. They sit flush around the outer perimeter of the rear light clusters, introducing a bright, chrome-adjacent silver accent that adds definition, depth, and a more premium character to the rear fascia. The result is a look that feels factory-deliberate rather than aftermarket-obvious. Manufactured from high-grade ABS plastic with a durable silver surface finish, these covers are built to withstand the demands of daily driving — UV exposure, temperature cycling, and road wash alike. Installation is adhesive-backed and tool-free, making this one of the most rewarding exterior upgrades available for the Discovery Sport in terms of visual return versus effort. What's Included 🔲 Tail Light Frame Covers × 4 Full set — both left and right rear light clusters covered 🔧 Pre-Applied Adhesive Tape 3M-style double-sided tape pre-fitted to each cover 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Designed specifically for the 2015–2019 Discovery Sport L550 — precision fitment, no guesswork High-grade ABS plastic construction — lightweight yet impact-resistant Silver surface finish — bright, consistent tone that complements both light and dark body colours Pre-applied double-sided adhesive — no drilling, no tools, no risk of panel damage Complete set of 4 pieces — both tail light clusters fully covered in one purchase UV-stabilised material — resists fading, yellowing, and surface degradation over time Low-profile design — sits flush and clean without protruding or obscuring the light function Weather-sealed adhesive — maintains bond through rain, heat, and cold cycling Reversible installation — can be removed cleanly without marking factory paintwork Visual upgrade with minimal effort — one of the highest-impact exterior trim additions available for the Discovery Sport Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2019 – 2024 Verify Before Ordering Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the rear tail light surround area using an IPA (isopropyl alcohol) prep wipe or similar degreaser. Allow to dry completely — any wax, oil, or moisture will compromise adhesion. Dry-fit each cover piece against the tail light frame to confirm alignment and position before committing. Take note of any subtle differences between left and right pieces. Peel back a small section of the adhesive liner — do not remove entirely at this stage. Align the cover carefully from one edge, using the light cluster housing as your guide. Once satisfied with alignment, progressively remove the adhesive liner whilst pressing the cover firmly into place, working from the centre outward to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds per piece. Pay particular attention to corners and edges where the adhesive contact area is smallest. Allow the adhesive bond to cure for a minimum of 24 hours before driving through rain or a car wash. Ambient temperature above 15°C during installation will improve initial bond strength. ⚠ Note: These covers are an exterior cosmetic accessory. Ensure all pieces are fully seated before final pressure is applied — repositioning after full adhesive contact may reduce bond quality. If your vehicle has been resprayed, test adhesive compatibility on an inconspicuous area first. Complete Your Discovery Sport Browse the full Victorious Automotive range of Discovery Sport accessories — from interior trim upgrades to exterior styling additions, built for owners who hold their vehicles to a higher standard. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Silver ABS Roof Reading Lamp Cover Trim for Land Rover Discovery 5 LR5 HSE Luxury 2017–2020 A precise-fit silver ABS trim surround that elevates the roof reading lamp area of your Discovery 5 cabin with a clean, polished finish — no tools, no fuss. Discovery 5 · LR5 2017–2020 Silver Finish ABS Plastic Roof Reading Lamp Tool-Free Install HSE Luxury Interior Trim Overview The Land Rover Discovery 5 — whether in standard specification or HSE Luxury trim — arrives from the factory with a refined interior that rewards attention to detail. For owners who take pride in the smaller touches, the roof reading lamp surround is one of those overlooked areas where the standard plastic finish can appear flat and underwhelming against an otherwise premium cabin environment. This silver ABS roof reading lamp cover trim is engineered as a direct overlay for the existing lamp surround on 2017–2020 Discovery 5 and LR5 models. Crafted from high-quality ABS plastic with a bright silver finish, it introduces a polished, contemporary accent to the headliner area — complementing chrome interior detailing and light-coloured cabin trims particularly well. Installation requires no drilling, no wiring, and no specialist tools. The trim uses pre-applied double-sided adhesive tape to bond cleanly to the OEM surround, making this an ideal Saturday-morning upgrade that delivers a noticeably more composed interior aesthetic with minimal effort. What's Included 💡 Roof Reading Lamp Cover Trim 1× silver ABS surround trim piece 🔧 Pre-Applied Adhesive Double-sided tape backing included 📄 Installation Guide Basic fitting reference included Product Highlights Precision-moulded ABS plastic for an accurate fit over the OEM lamp surround Bright silver finish for a polished, premium interior accent Pre-applied double-sided adhesive — no tools or drilling required 100% brand new, never fitted — supplied in protective packaging Specifically designed for Discovery 5 / LR5 2017–2020 roof lamp area Lightweight construction — adds no perceptible weight to the headliner Compatible with HSE, HSE Luxury, and comparable trim levels Durable ABS material resists warping, heat, and UV discolouration Clean, seamless overlap with no visible gaps when correctly fitted Reversible installation — can be removed without damaging OEM trim Compatibility Vehicle Model Code Year Range Trim Level Fit Land Rover Discovery 5 LR5 / L462 2017–2020 S, SE, HSE, HSE Luxury Direct Fit Land Rover Discovery 5 LR5 / L462 2021–2024 All Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 All Not Compatible Land Rover Discovery 3 L319 2004–2009 All Not Compatible Range Rover Sport L494 L494 2013–2020 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle switched off. Ensure the headliner and existing lamp surround are clean, dry, and free from dust, grease, or conditioning products. Use an isopropyl alcohol wipe (not supplied) to thoroughly degrease the surface of the OEM lamp surround where the trim will adhere — this is critical for a lasting bond. Dry-fit the silver trim piece over the existing surround without removing the adhesive backing, confirming alignment and verifying the fit before committing. Once satisfied with the position, carefully peel the adhesive backing from the trim piece, align it precisely, and press firmly into place from the centre outward. Apply sustained hand pressure across the full surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing to heavy vibration or direct sunlight through the glass. ⚠ Note: Ensure the cabin temperature is above 15°C during installation. Cold conditions can reduce initial adhesive tack. Do not attempt installation immediately after using interior detailing sprays or fabric protectors on the headliner area. Complete Your Discovery 5 Interior Browse our full range of Land Rover Discovery 5 interior trim upgrades — designed by enthusiasts, for owners who won't settle for stock. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim Silver ABS Side Air Vent Fender Trim — Land Rover Discovery Sport 2015–2019 A precision-matched fender vent trim that adds a purposeful, performance-inspired aesthetic to the Discovery Sport's front quarter panels — no cutting, no drilling, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Exterior Trim Side Air Vent Fender Accent Pair Included Overview The Land Rover Discovery Sport — introduced in 2015 as the spiritual successor to the Freelander — is a vehicle that straddles the line between family-friendly practicality and genuine off-road capability. It's a machine that rewards personalisation, and owners who know their car well are always looking for ways to sharpen its road presence without straying from the original design language. This Silver ABS Side Air Vent Fender Trim is designed specifically for the Discovery Sport produced between 2015 and 2019. Moulded from high-quality ABS plastic and finished in a clean silver tone, the trim attaches to the front fender area to simulate functional side vents — a design cue borrowed from performance and sporting derivatives across the Land Rover range. The result is a more assertive, athletic stance that looks factory-fitted rather than aftermarket. Available in silver, red, and yellow, this trim gives Discovery Sport owners a simple and reversible way to refresh the exterior without committing to a full body kit or expensive respray. The adhesive-backed fitment process is straightforward and tool-free, making this an ideal weekend upgrade for any enthusiast who wants a meaningful visual result in under an hour. What's Included 🔲 Side Air Vent Fender Trims × 2 Left and right matched pair, silver ABS finish 🔧 Pre-Applied Adhesive Tape 3M-grade backing for a secure, clean bond 📋 Fitment Guide Step-by-step installation reference included Product Highlights Precision-moulded ABS plastic with consistent wall thickness throughout Silver finish replicates the look of factory exterior chrome and satin accents Supplied as a matched left and right pair for balanced fitment Pre-applied adhesive backing ensures clean, rattle-free installation No drilling, cutting, or modification to the vehicle bodywork required Reversible upgrade — removable without damaging original paintwork UV-resistant ABS construction resists fading in direct sunlight Available in multiple colour options: Silver, Red, and Yellow Compatible with all trim levels of the Discovery Sport 2015–2019 Adds a performance-oriented, sporty aesthetic to the front quarter panels Compatibility Vehicle Code Years Fitment Land Rover Discovery Sport L550 2015–2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020–2024 Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Installation Notes 🛠 Difficulty: Beginner — Estimated Time: 20–30 Minutes Thoroughly clean the target area on both front fenders using an IPA (isopropyl alcohol) wipe to remove all wax, grease, and dirt. Allow to dry completely before proceeding. Dry-fit both trim pieces against the fender to confirm positioning and ensure you are satisfied with the placement and symmetry before committing to adhesion. Peel back the adhesive liner from the rear of the trim piece, exposing the bonding tape. Take care not to touch the adhesive surface. Align the trim carefully to your desired position on the fender vent area. Press firmly and evenly across the entire surface for 30–60 seconds to activate the adhesive bond. Repeat the process for the opposing side, ensuring symmetry between left and right trims. Allow a minimum of 24 hours before washing the vehicle or exposing the area to water. This allows the adhesive to cure fully and achieve maximum bond strength. ⚠ Note: Fitment quality is heavily dependent on surface preparation. Do not attempt installation in cold temperatures below 10°C, as adhesive performance may be significantly reduced. If in any doubt, contact our team before installation — we're happy to help. Upgrade Your Discovery Sport Today Browse our full range of Land Rover Discovery Sport accessories — from exterior styling to interior enhancements — all curated specifically for your vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for identification and compatibility purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Silver ABS Tailgate Door Switch Frame Cover Trim for Land Rover Discovery 5 LR5 L462 (2017–2023) A precision-cut, silver ABS tailgate switch surround that instantly refines the rear interior of your Discovery 5 — no drilling, no fuss, just a cleaner finish where it matters. Discovery 5 L462 2017–2023 Silver Finish ABS Plastic Tailgate Switch Trim Adhesive Fit Interior Upgrade Brand New Overview The Land Rover Discovery 5 (L462) is a vehicle built around capability and comfort, and owners who invest in this platform tend to care just as much about the details inside as the terrain outside. From the second row back to the tailgate, every surface is noticed — and the rear door switch area is one of those small zones that, when left in its factory-plain state, can feel like a missed opportunity in an otherwise well-appointed interior. This tailgate door switch frame cover trim slots precisely over the existing switch housing at the rear of your Discovery 5's interior, covering the surrounding panel with a clean silver ABS finish. The result is a more cohesive, considered look that aligns with the premium character of the cabin without any invasive modification. Whether you're building out a full interior refresh or simply addressing one overlooked detail, this piece delivers a noticeable step up in interior quality. Made from high-grade ABS plastic with a durable silver coating, this trim is engineered for long-term adhesion and resistance to the temperature fluctuations and contact wear that come with real-world use. Installation is entirely tool-free — the trim mounts via pre-applied double-sided adhesive, meaning a confident, permanent bond that takes minutes to achieve and looks factory-fitted from day one. What's Included 🔲 Tailgate Switch Frame Cover 1× silver ABS trim piece, pre-cut for Discovery 5 L462 🔧 Double-Sided Adhesive Pre-applied tape backing for tool-free installation Product Highlights Precision-cut specifically for the Discovery 5 (L462) tailgate switch area High-grade ABS plastic construction for durability and rigidity Silver finish complements chrome and brushed aluminium interior accents Tool-free installation via pre-applied double-sided adhesive tape Protects the underlying switch surround from scratches and wear No drilling, cutting, or permanent modification required Colour-stable finish resistant to UV fading and interior heat cycles Slim-profile design that sits flush and looks factory-installed 100% brand new — not refurbished or reconditioned Also available in black wood grain and carbon fibre finishes Compatibility Vehicle Code Year Range Fit Land Rover Discovery 5 L462 (LR5) 2017 – 2023 Direct Fit Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 2004 – 2009 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Open your Discovery 5's tailgate fully to gain clear access to the interior switch panel area. Clean the switch surround surface thoroughly using an alcohol wipe or isopropyl alcohol pad, removing any grease, dust, or residue. Allow to dry completely before proceeding. Test-fit the trim piece dry (without removing the adhesive backing) to confirm alignment and orientation. The trim should sit flush with no gaps. Peel the protective backing from the double-sided adhesive tape on the reverse of the trim. Align the trim carefully over the switch surround and press firmly and evenly across the entire surface for 30–60 seconds to ensure a secure bond. Allow the adhesive to cure for at least 1–2 hours before handling the trim or closing the tailgate repeatedly. ⚠ Note: Ensure the mounting surface is completely clean and dry before applying. Installing in cold temperatures (below 10°C) may reduce initial adhesive strength — allow the vehicle interior to warm before fitting if possible. Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions before installation. Complete Your Discovery 5 Interior This tailgate switch trim is just the start. Browse our full range of Discovery 5 interior accessories — from door handle surrounds to dashboard trim panels — all curated for the LR5 L462 platform. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

نوع العنصر: القوالب الداخلية السنة: 2017 2018 وزن السلعة: 50 جرام شهادة الاختبار الخارجي: ISO9001 اسم الموديل: لسيارة BMW الفئة الخامسة G30 نوع المادة: بلاستيك ايه بي اس اسم العلامة التجارية: ميتيوكار عرض السلعة: 0 بوصة ارتفاع السلعة: 0 بوصة طول السلعة: 0 بوصة اللون: فضي مطفي

العنصر: مقابض تكييف الهواء الداخلي للسيارة زخرفة دائرة الصوت الحالة: 100% جديد تمامًا المواد: مصنوعة من سبائك الألومنيوم عالية الجودة يصلح لاند روفر ديفندر 110 2020 صنع في مصنع ISO9001، ذو نوعية جيدة وتم تصديره إلى جميع أنحاء العالم تثبيت سهل يرجى التأكد مما إذا كانت المنتجات تتطابق مع سيارتك قبل الشراء

نوع العنصر: شوايات السباق اسم العلامة التجارية: كاربونارت سنة الموديل: 2016-2017 اسم الموديل: جي ال سي X253 شهادة الاختبار الخارجي: ce طول السلعة: 108 سم عرض السلعة: 35 سم ارتفاع السلعة: 35 سم وزن السلعة: 5 كجم نوع المادة: ايه بي اس ميزات خاصة: قطع غيار لماركات المركبات/الطراز: مرسيدس بنز اللون: فضي/أسود موديل السيارة: X253 نوع المادة: ايه بي اس التصميم: Am*g GT R *يناسب طراز 2016+ GLC Class X253 كوبيه/4 MATIC/GLC43 فقط* *غير مناسب لطراز GLC63* لم يتم تضمين شارة نجمة MB،  الرجاء استخدام الشارة على شبكتك الأصلية. لا يتم تضمين الضريبة الجمركية في السعر! انتباه: عزيزي العملاء، من أجل مساعدتك بشكل جيد وشحن المنتجات الصحيحة في أسرع وقت ممكن دون أي سوء فهم غير سعيد، يرجى تدوين الملاحظات أو ترك رسالة لنا حول طراز السيارة المحدد الذي تريد المنتج من أجله، مثل "سيارتي فئة 2016 C" W205 كوبيه 2 باب" انتباه: عزيزي العملاء، من أجل مساعدتك بشكل جيد وشحن المنتجات الصحيحة في أسرع وقت ممكن دون أي سوء فهم غير سعيد، يرجى تدوين الملاحظات أو ترك رسالة لنا حول طراز السيارة المحدد الذي تريد المنتج له، مثل "سيارتي فئة 2016 C" W205 كوبيه 2 باب"

قم بالترقية إلى شرائح فتحة غطاء المحرك/غطاء المحرك هذه لسيارة رينج روفر فيلار 2017 -2020 سهل التنصيب قم بترقية سيارة Velar الخاصة بك إلى المظهر الديناميكي مواد ذات جودة عالية متوفر باللون الذهبي الوردي أو الفضي أو الأسود حوّل سيارة Velar الخاصة بك إلى ملفتة للنظر مع هذا المظهر الديناميكي المزخرف. سهل التركيب، مع شريط لاصق عالي الجودة، فقط قم بتقشيره ولصقه.

ABS الجبهة العلوي شبكة المبرد لاند روفر رينج روفر سبورت 2018 2019 اكسسوارات السيارات التصميم مصبغة الميزات: اختبار صارم لمراقبة الجودة في المصنع، جودة عالية مضمونة. يمنح سيارتك نمطًا ومظهرًا جديدًا يبرز المظهر العام لسيارتك ترقية رائعة لسيارتك يوفر تدفق هواء أفضل إلى المبرد للمساعدة في عملية التبريد بشكل أفضل الوصف: الحالة: 100% جديد تمامًا المادة: مصنوعة من جودة عالية - لا تتضمن أي شارة

أضف بعض اللمعان إلى سيارة رينج روفر فوغ أو سبورت الخاصة بك مع هذه الزخارف اللامعة بنمط سواروفسكي أضف لمسة شخصية إلى سيارة رينج روفر الخاصة بك مصنوعة من مواد عالية الجودة الكروم والماس على طراز سوارفوكسي. متوفر باللون الفضي أو الذهبي مجموعة قطعتين التثبيت بنقرة مطبقة مسبقًا التثبيت في أقل من دقيقتين.

أضف بعض اللمعان إلى سيارة رينج روفر فوغ أو سبورت الخاصة بك مع هذه الزخارف اللامعة بنمط سواروفسكي أضف لمسة شخصية إلى سيارة رينج روفر الخاصة بك مصنوعة من مواد عالية الجودة على طراز سواروفسكي الكروم والماس على طراز سوارفوكسي. متوفر باللون الفضي أو الذهبي مجموعة من أربع قطع التثبيت بنقرة مطبقة مسبقًا التثبيت في أقل من دقيقتين.

أضف بعض اللمعان إلى سيارة رينج روفر فوغ أو سبورت الخاصة بك مع هذه الزخارف اللامعة بنمط سواروفسكي أضف لمسة شخصية إلى سيارة رينج روفر الخاصة بك مصنوعة من مواد عالية الجودة الكروم والماس على طراز سوارفوكسي. متوفر باللون الفضي أو الذهبي مجموعة قطعة واحدة التثبيت بنقرة مطبقة مسبقًا التثبيت في أقل من دقيقتين.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Protection Silver Anti-UV Sunshade for Front Windscreen — Land Rover Discovery 4 LR4 (2004–2016) Purpose-cut UV-reflective windscreen sunshade for the Discovery 4 LR4 — keeps your cabin cooler, your dashboard protected, and your interior looking factory-fresh for longer. Discovery 4 LR4 2004–2016 Silver Reflective Tape Anti-UV Interior Protection Front Windscreen Easy Fit No Tools Required Overview The Land Rover Discovery 4 LR4 is one of the most capable and well-appointed 4x4s ever produced — a vehicle that rewards its owner with a premium interior that deserves to be maintained as such. Whether your Discovery spends its days navigating city streets or parked under the open sun on an overland adventure, prolonged UV exposure takes a measurable toll on dashboards, leather trims, and switchgear. Prevention costs a fraction of restoration. This front windscreen sunshade has been specifically designed to fit the Discovery 4 LR4 produced between 2004 and 2016. Constructed from high-quality silver reflective tape material, it sits across your windscreen and immediately deflects solar radiation before it can penetrate the glass — reducing cabin temperature, protecting your interior surfaces, and preserving the condition of your instrument panel and seating surfaces over the long term. The silver finish is highly effective at reflecting both visible light and infrared radiation, while the straightforward double-sided adhesive tab system means fitting takes under two minutes with no tools, no modifications, and no fuss. It's the kind of thoughtful, understated accessory that Discovery 4 owners appreciate — genuinely useful, properly made, and exactly right for the vehicle. What's Included 🪟 Front Windscreen Sunshade Silver anti-UV panel, pre-cut for Discovery 4 LR4 📋 Installation Guide Simple fitting instructions included Product Highlights Purpose-designed fit for the Discovery 4 LR4 windscreen profile Silver reflective surface actively deflects UV and infrared radiation Significantly reduces cabin temperature when parked in direct sun Prevents dashboard cracking, fading, and material degradation Protects leather seats and interior trim from UV bleaching Quick installation via double-sided adhesive — no tools required Lightweight and easily stored when not in use Durable silver tape material resists heat, moisture, and warping Maintains clear windscreen visibility when properly positioned Compatible with all Discovery 4 LR4 variants across the 2004–2016 range Compatibility Model Code Year Range Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Time: Under 5 Minutes  ·  🔧 Tools Required: None Park your Discovery 4 LR4 on a flat surface and ensure the windscreen interior is clean and free of dust or grease before fitting. Unfold the sunshade fully and orient it with the silver reflective face pointing outward toward the glass. Position the sunshade across the full width of your windscreen, aligning it with the top edge of the dashboard. Use the integrated double-sided adhesive tabs to secure the shade in place — press firmly against the glass or sun visor to ensure adhesion. Adjust as needed to ensure full windscreen coverage with no gaps at the edges where sunlight may enter. When not in use, fold the shade neatly and store in the boot or under a seat — it takes up minimal space. ⚠ Note: Do not drive with the sunshade in position across the windscreen. This product is designed for use only when the vehicle is stationary and parked. Ensure the shade is fully removed and stowed before moving the vehicle. Shop the Full Discovery 4 Collection Explore our full range of interior and exterior accessories curated specifically for the Land Rover Discovery 4 LR4 — all precision-fit, all designed to preserve and enhance your vehicle. Browse Discovery 4 Accessories 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

زخرفة ترقية وحدة التحكم الفضية VELAR. نوع العنصر: القوالب الداخلية ارتفاع السلعة: 10 سم اسم الموديل: LLK1350 شهادة الاختبار الخارجي: ISO9001 السنة: 2017 وزن السلعة: 500 جرام طول السلعة: 55 سم اسم العلامة التجارية: ميتيوكار نوع المادة: ايه بي اس عرض السلعة: 30 سم اللون الفضي نموذج الإعداد: لاند رينج روفر فيلار 2017 2018 التثبيت: الجزء الخلفي مع شريط لاصق للسيارات

نوع العنصر: القوالب الداخلية عرض السلعة: 0 سم نوع المادة: سبائك الألومنيوم اسم الموديل: LLK1146 شهادة الاختبار الخارجي: ISO9001 السنة: 2018 اسم العلامة التجارية: ميتيوكار طول السلعة: 0 سم وزن السلعة: 524 جرام ارتفاع السلعة: 0 سم اللون الفضي الإعداد: لاند رينج روفر فيلار 2017 التثبيت: سهل التركيب، ظهر بشريط مزدوج الجوانب

لاند روفر ديفندر الشبك الأمامي الأوسط والمحيط والأقواس وصف العنصر: لاند روفر ديفيندر 90 110 الحالة: 100% جديد تمامًا. المواد: ABS اللون: فضي وأسود تتضمن العبوة: (شبكة متوسطة قطعة واحدة + محيط قطعتين + دعامة قطعتين)، إجمالي 5 قطع. ملحوظة: - يرجى السماح باختلاف 1-3 سم بسبب القياس اليدوي. - بسبب اختلاف شاشات العرض والإضاءة المختلفة، قد لا تعكس الصورة اللون الفعلي للصنف. شكرا لتفهمك.

Victorious Automotive · Defender · Interior Protection Silver Front Windshield Sun Shield for Land Rover Defender (2004–2022) Premium UV-reflective parasol sun shade—keeps your Defender's cabin cool and protects interior trim from fading. Defender 2004–2022 Full Window Coverage Silver Composite UV Protection Easy Install Overview If you own a Defender—whether a classic 2004 model or a modern L663—you know how quickly cabin heat builds under the sun. Dashboard materials fade, door cards discolour, and your steering wheel becomes uncomfortably hot on long journeys. This silver front windshield sun shield addresses all of that. Engineered from premium composite material in an ISO 9001 certified facility, this parasol delivers maximum solar reflection with minimal bulk. The reflective silver finish bounces away UV rays before they penetrate the glass, reducing cabin temperature by up to 15°C and preventing long-term UV damage to your interior. Installation takes under two minutes—no tools, no adhesives, no permanent marks. Simply unfold, position, and secure. When you exit the vehicle, roll it up and stow it in the supplied carrying pouch. It's the most practical defence against sun damage you can buy for your Defender. What's Included ☀️ Sunshield Parasol Silver composite, full windshield coverage 🎒 Carrying Pouch Compact storage for car or garage Product Highlights Engineered composite material—lightweight yet durable ISO 9001 certified manufacturing Reflective silver finish maximises UV rejection Full front windshield coverage—no blind spots Reduces cabin temperature by up to 15°C Blocks harmful UV rays that fade interior trim Folds compactly for easy storage No suction cups, no adhesive—completely non-permanent Takes under 2 minutes to install or remove Works with all Defender variants 2004–2022 Compatibility Defender Model Year Range Fit Status Defender 90 / 110 2004–2016 Direct Fit Defender 90 / 110 2017–2019 Direct Fit Defender L663 (New) 2020–2022 Direct Fit Installation Difficulty: Beginner | Time: 2 minutes Open your Defender's driver door and stand outside facing the windshield Unfold the silver shade fully—it should span the entire front window width Position the top edge against the interior base of the windshield frame Secure the bottom edge using the integrated friction tabs or dashboard ledge Adjust left and right edges for maximum coverage—no gaps at the pillars When exiting, roll gently and store in the included pouch Note: Never drive with the sunshield in place. Always remove before operating your vehicle. Ensure it's fully secured and won't fall during entry or exit. Protect Your Defender's Interior Today Sun damage is permanent. Interior fade, cracked door cards, and warped trim are expensive to repair. This silver windshield shade costs a fraction of a restoration and takes seconds to deploy. Every parking session counts—protect your investment now. Shop Defender Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ reviews 🚚 Worldwide Shipping · DHL, FedEx, UPS, TNT ✅ 30-Day Guarantee · Money back, no questions 📞 Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover distributors. All vehicle names, logos, and specifications are the property of their respective owners. Product compatibility is provided in good faith based on standard OEM measurements; individual vehicles may vary. Always verify fitment with our support team before purchase.

نوع العنصر: ملصقات وضع الملصق: داخلي النوع: ملصق غراء التصميم: تغيير اللون الموديل: تصنيع المعدات الأصلية اسم الموديل: AJLMM11225 طول السلعة: 0 عرض السلعة: 0 ارتفاع السلعة: 0 قطر السلعة: 0 نوع المادة: عبس is_customized: نعم التعبئة والتغليف: غير معبأة نوع الملصق: ملصقات إبداعية الفئة: 3D اسم العلامة التجارية: ONESTICKERS اللون الفضي نموذج قابل للتطبيق: لاند روفر رينج روفر إيفوك 2012-2018 الحجم: حجم السيارة الأصلي الميزات: الديكور والحماية الحالة: 100% جديد

أضف لمسة من الفخامة والرقي إلى مقصورة سيارة رينج روڤر الخاصة بك عن طريق تركيب أغطية عتلات النوافذ بإصدار SVO Autobiography Edition. قم بتعزيز التصميم الداخلي لسيارتك Range Rover Vogue أو Sport من خلال تركيب هذا الطراز من SVO. SV (مركبة خاصة) هي جزء من شركة Land Rover التي تنتج سيارات خاصة لسوق السيارات الفاخرة الراقية. إنها تناسب أجزاء هذه المركبات الخاصة بتحسينات فاخرة لا تتوفر في الطرازات الأخرى. تم تجهيز الجزء العلوي من مجموعة SV Autobiography Edition بتحسينات داخلية فاخرة لا يمكن العثور عليها في الطرازات الأخرى. قم بتطبيق هذه الملصقات على مفاتيح النافذة الخاصة بك لإكمال الترقية مصنوع من بلاستيك مقطوع بالليزر عالي الجودة انتهى باللون الفضي غير اللامع تعيين للسيارة بأكملها. اجعل سيارة رينج روفر الخاصة بك تبدو مختلفة عن الباقي مع هذه الترقية البسيطة. التثبيت في أقل من 5 دقائق! يصلح لاند روفر رينج روفر فوغ 2013-2017 يصلح لاندروفر رنج روفر سبورت 2014-2017 لسيارة رينج روفر فيلار 2017-2019 لاند روفر ديسكفري 5 2017-2019

ABS الجبهة العلوي شبكة المبرد لاند روفر رينج روفر سبورت 2018 2019 اكسسوارات السيارات التصميم مصبغة الميزات: اختبار صارم لمراقبة الجودة في المصنع، جودة عالية مضمونة. يمنح سيارتك نمطًا ومظهرًا جديدًا يبرز المظهر العام لسيارتك ترقية رائعة لسيارتك يوفر تدفق هواء أفضل إلى المبرد للمساعدة في عملية التبريد بشكل أفضل الوصف: الحالة: 100% جديد تمامًا المادة: مصنوعة من جودة عالية - لا تتضمن أي شارة

تضيف ترقية غطاء مكبر الصوت لمسة من الفخامة إلى جهاز Land Rover Defender 110/ 90 2020. - جودة عالية - مجموعة من 8 قطع - سهولة التركيب باستخدام الشريط المطبق مسبقًا. اسم الموديل: LLK2816 شهادة الاختبار الخارجي: ISO9001 ارتفاع السلعة: 10 سم طول السلعة: 30 سم نوع المادة: سبائك الألومنيوم نوع العنصر: القوالب الداخلية وزن السلعة: 300 جرام عرض السلعة: 15 سم السنة: 2020 اللون الفضي نموذج الإعداد: لاند روفر ديفندر 2020 التثبيت: الجزء الخلفي مع شريط لاصق للسيارات

مواصفات المنتج: 100% مادة جديدة تمامًا: مستورد من مادة TPU (الشفاء الذاتي) اللون: أسود مدخن سيعطي سيارتك مظهرًا جذابًا للعين الميزة: مقاومة للخدش والديكور سهلة التركيب: 1. رش الماء على الضوء والفيلم. 2. قم بلصق الفيلم في المكان المناسب. 3. قم بعصر الماء وإخراج الفقاعات باستخدام وسادة. تتضمن العبوة: قطعتان من طبقة حماية المصباح الأسود المدخن مسبقًا (مع الأدوات كهدية)

لماركات المركبات/الطراز: لاند روفر رينج روفر سبورت-السنة: 2007,2006,2010,2008,2011,2013,2009,2012 نوع المادة: بي سي + ايه بي اس موديل لاند روفر: رنج روفر سبورت الجهد: 12 فولت وزن السلعة: 6 كجم نوع العنصر: مجموعة ضوء الذيل شهادة الاختبار الخارجي: CCC الشحن في جميع أنحاء العالم ضمان الخروج الآمن

يصلح لاند روفر ديفيندر TD5 1999 فصاعدا الديزل TD5 توربو إنتركوليد 5CYL.2.5 لتر يصلح لاند روفر ديفندر TD4 2007 فصاعدا 2.1 300TDI TD4.2 لتر ديزل يمين موقف المناسب: الجانب الأيمن حجم العبوة: 110*35*18 سم اسم العلامة التجارية: CITYCARAUTO التنسيب على السيارة: الجانب الأيمن ارتفاع السلعة: 17 سم صانع السيارة: لاند روفر طول السلعة: 110 سم نطاق التردد: مدخل الهواء نوع المادة: البولي إيثيلين منخفض الكثافة نوع العنصر: مداخل الهواء وزن السلعة: 5 كجم ميزات خاصة: هواء منعش عرض السلعة: 35 سم سنة الموديل: TD5 1999-2017 TD4 2007-2017 شهادة الاختبار الخارجي: ce اسم الموديل: TD5 TD4

قم بتحسين متانة سيارة Land Rover Defender 2020 L663 الخاصة بك من خلال نظام سحب الهواء المحسّن للحصول على مظهر قوي على الطرق الوعرة.

Victorious · Toyota Land Cruiser LC300 · Interior Stainless Steel Speaker Cover Upgrade for Toyota Land Cruiser 300 Premium interior protection that combines robust engineering with refined aesthetics for your LC300 cabin. LC300 2021–2024 Stainless Steel Corrosion Resistant No Drill Install Overview The Toyota Land Cruiser 300 is a masterclass in refinement and durability. From its commanding on-road presence to its uncompromising off-road capability, every detail matters. Your interior deserves the same attention to quality that Toyota engineered into the rest of your vehicle. These stainless steel speaker covers are precision-engineered to protect your factory audio system whilst elevating your cabin's visual hierarchy. Constructed from marine-grade, anti-corrosion stainless steel, they're designed to withstand moisture, temperature fluctuations, and the rigours of daily driving—whether that's your commute or your next expedition. Installation is straightforward with self-adhesive backing; no drilling, no modification, no permanent alteration. A set of four covers completes your door speaker zones in minutes, and they remove cleanly if circumstances change. Available in Black or Silver to match your interior palette. What's Included 🛡️ Speaker Covers (×4) Stainless steel, pre-cut for LC300 🧴 Self-Adhesive Backing Clean application, no drilling required 📋 Installation Guide Step-by-step instructions included ✓ Fit Guarantee LC300 2021–2024 models Product Highlights Marine-grade stainless steel resists corrosion in all weather conditions Protects factory speakers from dust, moisture, and road debris Self-adhesive installation—no drilling or permanent modification Available in Black or Silver to complement your interior Precision-engineered for perfect LC300 fit and finish Cleans easily with standard automotive detailing products Removable without adhesive residue or damage to original surfaces Enhances interior visual hierarchy with minimal intervention Maintains factory audio system integrity and performance Perfect complement to other LC300 interior upgrades Compatibility Model Year Range Fitment Toyota Land Cruiser 300 2021–2024 Direct Fit Toyota Land Cruiser 250 2024+ Not Compatible Toyota Land Cruiser 200 2007–2021 Not Compatible Always verify your vehicle's production year and door configuration against our product images before purchase. Contact our team at +44 203 943 9919 if you're uncertain about compatibility. Installation Difficulty Level: Beginner | Time: 15–20 minutes Preparation: Clean the speaker area thoroughly with a microfibre cloth and allow to dry completely. Any dust or debris will compromise adhesion. Position: Remove backing from the first cover and carefully align it over the speaker opening, checking fit and symmetry before pressing. Apply Pressure: Press firmly across the entire surface for 5–10 seconds, working from the centre outward to eliminate air pockets. Repeat: Apply the remaining three covers using the same method. Allow adhesive to cure fully before car washing or driving. Cure Time: Do not expose your vehicle to heavy rain, car washes, or moisture for 48 hours post-installation. ⚠️ Important: Avoid car washing for 48 hours after installation to allow adhesive to achieve maximum bond strength. Clean gently with a microfibre cloth and dry immediately. Complete Your LC300 Interior Premium craftsmanship doesn't stop at the drivetrain. Elevate your cabin with this thoughtful, durable speaker cover upgrade. Available now, backed by our 30-day money-back guarantee. Shop LC300 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars ✓ 12,300+ Reviews 🚚 Worldwide Shipping 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessories retailer. This product is not affiliated with, endorsed by, or manufactured by Toyota Motor Corporation, Toyota GB, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product descriptions are for reference only and compatibility should be verified before purchase.