Products

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Gear Shift Surround for Range Rover Evoque L538 (2012–2017) A precision-cut carbon fibre gear shift surround that brings a purposeful, motorsport-inspired aesthetic to the Evoque's centre console — with a factory-fit finish and no permanent modification required. Range Rover Evoque L538 2012–2017 Carbon Fibre Gear Shift Surround Interior Trim No Drilling Required ISO9001 Certified Direct Fit Model: AJLN1009 Overview The Range Rover Evoque L538 — launched in 2011 and built through to 2018 — established itself as a design-forward compact SUV that balanced urban composure with genuine Land Rover capability. Its interior, while well-appointed from the factory, offers a strong foundation for owners who want to personalise and elevate their cabin without compromising its premium character. The centre console in particular is a focal point — one of the most visually prominent surfaces in daily use. This carbon fibre gear shift surround is designed specifically for the 2012–2017 Evoque L538, machined and finished to replicate the exact contours of the OEM surround piece. The real carbon fibre weave construction — not a carbon-look vinyl wrap or printed film — delivers a genuine depth and texture that the factory plastic simply cannot match. It adds a layer of visual sophistication that feels like it belongs, not like an afterthought. Whether you spend your weekday commute or weekend escapes inside this cabin, small details like this shift the whole atmosphere. The carbon weave catches light differently at every angle, the trim aligns flush with surrounding surfaces, and the fit is secure without drilling, adhesive residue risk, or professional installation. It's the kind of upgrade that Evoque owners notice on first glance and appreciate every time they reach for the gear selector. What's Included 🔲 Carbon Fibre Gear Shift Surround Pre-cut to OEM shape for direct replacement 🔧 Fitting Hardware Clips and adhesive backing for secure fitment 📄 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Individually packaged to prevent transit damage Product Highlights Genuine carbon fibre construction — not a printed film or vinyl wrap Precision-cut to match the OEM gear shift surround profile exactly Finished with a high-gloss lacquer for depth, clarity and durability ISO9001 certified manufacturing process for consistent quality control Secure fitment using clips and adhesive — no drilling or cutting required Designed specifically for the Range Rover Evoque L538 2012–2017 Lightweight material adds no meaningful weight to the cabin Protects the underlying console surface from daily wear and scuffing Compatible with both left-hand and right-hand drive configurations Reversible installation — original trim can be refitted if required Compatibility Vehicle Code Year Range Fitment Range Rover Evoque (Original) L538 2012–2017 Direct Fit Range Rover Evoque (Original) Facelift L538 2018–2019 Verify Before Purchase Range Rover Evoque (Second Gen) L551 2019–2025 Not Compatible Range Rover Velar L560 2017–2025 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Land Rover Discovery Sport L550 2015–2025 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Ensure the centre console and gear shift surround area is clean, dry and free from dust or grease before beginning. Carefully remove the original gear shift surround trim piece from the console — it is typically held in place by retaining clips and can be gently prised free using a trim tool or flat-bladed implement wrapped in cloth to protect surrounding surfaces. Dry-fit the carbon fibre surround to confirm alignment with the console opening and all surrounding trim edges before committing to final fitment. Where adhesive backing is used, remove the protective film and press the surround firmly into position, applying even pressure across the surface for a minimum of 30 seconds. Where clips are provided, engage each clip fully until you hear or feel a secure click into the corresponding recess. Step back and inspect the fit from multiple angles. Ensure no edges are proud of the surrounding surface and that alignment is consistent on all sides. Note: If your Evoque is a 2018 facelift model, please verify the console layout against your existing trim piece before fitting. Minor design changes were introduced during the late L538 production run that may affect clip alignment. If in any doubt, contact us on +44 203 943 9919 before installation. Upgrade Your Evoque's Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision-crafted interior upgrades. Browse the full Evoque L538 collection or speak with our team Monday to Friday, 9am–7pm. Shop All Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Hand Brake Cover for Range Rover Velar 2017–2020 Upgrade your parking brake surround to premium carbon TPU with SVR-spec aesthetics and clip-on installation. L560 Platform 2017–2020 Carbon TPU Clip-On SVR Look Overview The Range Rover Velar L560 is celebrated for its minimalist, driver-focused interior and precision engineering. Subtle details matter tremendously on a vehicle this refined, which is why the hand brake surround deserves the same calibre of finish as the rest of your cabin. This carbon fibre hand brake cover transforms the standard climate control surround into a striking focal point. Precision-laser-cut to integrate seamlessly with your Velar's existing geometry, it clips directly over the factory piece without adhesives, fasteners, or modification. The result is a premium, integrated appearance that echoes the bold aesthetic found on SVR performance models. Manufactured from high-quality carbon TPU—a composite material that combines authentic carbon fibre weave with durable thermoplastic backing—this cover resists fingerprints, UV damage, and daily wear while maintaining a lustrous, professional finish. Installation takes minutes and requires no special tools or technical knowledge. What's Included 🎯 Carbon TPU Cover Precision-cut hand brake surround 📋 Installation Guide Step-by-step with images ✓ Fit Guarantee Perfect alignment or money back Key Features Authentic carbon fibre weave with TPU backing Laser-cut for precise factory-fit alignment Clip-on design—no adhesive, glue, or screws Resistant to fingerprints and UV fading SVR-inspired aesthetic for stock Velar cabins Durable thermoplastic composite material Reversible installation if needed Complements all interior trim packages Professional finish in under 5 minutes Part of Victorious Carbon Interior Packages Compatibility Model & Year Engine Compatibility Range Rover Velar P250 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P300 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar P400 (2017–2020) 2.0L Petrol Direct Fit Range Rover Velar D240 (2017–2020) 2.0L Diesel Direct Fit Range Rover Velar D300 (2017–2020) 3.0L Diesel Direct Fit Range Rover Velar SVR (2017–2020) 5.0L Supercharged Direct Fit Range Rover Velar 2021–Present All Engines Not Compatible Installation Guide Prepare: Ensure the hand brake surround and surrounding trim are clean and dry. No pre-treatment needed. Inspect Fit: Carefully position the carbon cover over the factory climate surround. Align clip points on all edges. Clip Engagement: Press firmly and evenly around all four sides until clips engage fully. You'll hear or feel a soft click. Verify Security: Gently pull on the cover to confirm it's firmly seated. Check that all edges are flush with surrounding trim. Final Check: Operate your hand brake lever to ensure full clearance and smooth motion. Adjust if necessary. Note: If your Velar has bespoke interior trim or non-standard dash finishes, test-fit the cover before finalising installation. The cover is reversible and will not damage factory components. Ready to Upgrade Your Velar? Transform your cabin with SVR-spec carbon fibre detailing. This hand brake cover is part of our comprehensive Carbon Interior Packages—designed to elevate every surface that matters. Shop Range Rover Velar Parts Save 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 – 12,300+ Reviews ✓ 30-Day Money Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx, UPS 📞 Expert Support Mon–Fri 9am–7pm GMT Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Installation of aftermarket parts may void manufacturer warranty in some cases—please verify with your Land Rover dealer before proceeding.

Victorious Automotive · Defender L663 · Interior Upgrades Carbon Fibre Inner Door Frame Replacement for Land Rover Defender 110 L663 (2020+) Full OEM-replacement inner door frame panels crafted from 100% real carbon fibre — purpose-built for the Defender L663 110, delivering a motorsport-grade interior transformation without compromise. Defender L663 2020–2026 100% Real Carbon Fibre Defender 110 OEM Replacement High-Gloss Finish Interior Upgrade UV Protected Left & Right Pair Overview The Land Rover Defender L663 110 is one of the most capable and characterful vehicles on the road — a genuine icon reborn with modern engineering, purpose-built interiors, and an increasingly premium positioning. For owners who demand their Defender's cabin matches its performance and presence, the factory door frame trim often falls short of the standard these vehicles deserve. Our Carbon Fibre Inner Door Frame Replacements are engineered as complete drop-in OEM replacements, not adhesive overlays or clip-on veneers. Each panel is constructed from 100% real woven carbon fibre with a deep, high-gloss clear coat that catches light exactly as you'd expect in a proper performance-focused build. The result is a clean, integrated finish that looks factory-fitted — because in every practical sense, it is. The weave pattern and panel geometry are developed specifically for the Defender L663 platform, ensuring that factory mounting points align perfectly and trim gaps remain consistent with your original fitment. Whether your Defender wears a Dark Atlas Black interior, a Khaki textile finish, or a high-spec Ebony leather configuration, these carbon fibre panels add a layer of bespoke refinement that elevates the entire door environment without disturbing the original design language. What's Included 🖤 Left Inner Door Frame Panel Driver-side OEM replacement — carbon fibre, high-gloss finish 🖤 Right Inner Door Frame Panel Passenger-side OEM replacement — carbon fibre, high-gloss finish 📦 Protective Packaging Each panel individually wrapped and secured for safe transit 📋 Fitment Reference Guide General installation reference included with your order Product Highlights Constructed from 100% real woven carbon fibre — no ABS plastic with carbon print Deep high-gloss clear coat finish for a premium, showroom-quality appearance UV-resistant coating protects against fading, yellowing, and surface degradation over time Full OEM-style replacement panels — not adhesive overlays or peel-and-stick veneers Precision-engineered to align with factory mounting points on the Defender L663 platform Ultra-lightweight carbon construction adds no meaningful weight to the door assembly Impact-resistant layup maintains structural integrity in daily use conditions Compatible with all Defender 110 trim levels from S through to V8 Complements carbon interior packages, black roof liners, and dark-themed cabin builds No modifications, cutting, or adhesive required — direct fit using factory hardware Compatibility Vehicle Code Year Range Trim Level Fitment Land Rover Defender 110 L663 2020–2026 S Direct Fit Land Rover Defender 110 L663 2020–2026 SE Direct Fit Land Rover Defender 110 L663 2020–2026 X-Dynamic SE Direct Fit Land Rover Defender 110 L663 2020–2026 X-Dynamic HSE Direct Fit Land Rover Defender 110 L663 2020–2026 X Direct Fit Land Rover Defender 110 L663 2020–2026 V8 / V8 Carpathian Direct Fit Land Rover Defender 90 L663 2020–2026 All Trims Not Compatible Land Rover Defender 130 L663 2022–2026 All Trims Not Compatible Land Rover Defender (Original) L316 Pre-2020 All Trims Not Compatible Installation Notes 🔧 Difficulty: Moderate  ·  ⏱ Estimated Time: 45–90 Minutes  ·  👤 Professional Installation Recommended Ensure the vehicle is parked on a flat surface with the doors fully accessible. Disconnect the vehicle battery as a precaution before beginning work around door trim panels. Carefully remove the existing OEM inner door frame panels using a trim removal tool. Work around the panel perimeter methodically to release each factory clip without cracking adjacent trim. Disconnect any wiring looms, speaker connectors, or window control harnesses as needed and set them safely aside. Dry-fit the carbon fibre replacement panel to the door frame and confirm alignment with all factory mounting points before final installation. No cutting or modification should be required. Reconnect any wiring looms or connectors, then press the carbon panel firmly into position until all clips engage. Verify that trim gaps are consistent around the panel perimeter. Repeat the process for the opposite door. Reconnect the vehicle battery and test all door-mounted controls to confirm correct operation before closing the doors. ⚠ Please Note: Professional installation is strongly recommended to avoid damage to surrounding trim or door hardware. These are full replacement panels — do not attempt to install over existing factory trim. If in doubt, consult a qualified automotive trim specialist or Land Rover-approved technician. Refined Cabin. Rugged Soul. Unmistakably Defender. Every detail inside your Defender L663 is an opportunity to express the standard you hold your vehicle to. These carbon fibre door frame replacements are where genuine craftsmanship meets purpose-built engineering — available exclusively from Victorious Automotive. Shop All Defender L663 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase. If you have any questions, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919.

```html Jaguar · E-Pace · Interior Trim Carbon Fibre Interior Console for Jaguar E-Pace 2018–2020 Precision-cut carbon fibre gear shift trim that transforms your E-Pace interior with motorsport-grade styling. E-Pace 2018–2020 Carbon Fibre ABS Composite Gear Shift Trim Direct Fit Overview The Jaguar E-Pace demands interior refinement that matches its dynamic exterior. This carbon fibre interior console upgrade transforms your centre console and gear shift surround with authentic motorsport styling, instantly elevating the visual impact of your cabin. Precision-cut from high-quality ABS composite with a genuine carbon fibre weave finish, this trim piece sits flush against your existing interior without modification. The textured weave catches light beautifully and creates depth and dimensionality—a detail that separates cars that are merely owned from those that are truly refined. Installation is straightforward, requiring no specialist tools or permanent modifications. Once fitted, the console becomes an integral part of your E-Pace's design language, perfectly complementing factory trim and aftermarket upgrades alike. What's Included 🎯 Console Trim Panel Single-piece centre console cover ✓ Pre-Fitted Adhesive Factory-grade contact backing 📋 Installation Guide Step-by-step visual instructions 🔒 30-Day Guarantee Full refund if not satisfied Product Highlights Authentic carbon fibre weave finish—no cheap imitations High-quality ABS composite for durability and lightweight design Precision-cut to OEM dimensions—seamless factory fit Pre-applied contact adhesive—no additional materials needed Resistant to fading, UV damage, and thermal stress Complements both factory and modified interiors Reversible installation—leaves no permanent marks Works with all E-Pace trim levels (S, R-Dynamic, HSE) Professional finish that rivals dealer-installed upgrades Part of a complete E-Pace interior upgrade system Compatibility Vehicle Years Fitment Jaguar E-Pace 2018–2020 Direct Fit Jaguar E-Pace 2021–Present Not Compatible Installation Notes Difficulty Level: Beginner | Time: 15 Minutes Remove protective film from the back of the trim panel. Clean the factory console surface thoroughly with a microfibre cloth and isopropyl alcohol. Allow to dry completely. Carefully position the trim panel above the centre console to verify alignment. Once satisfied with placement, press firmly into position, working from the centre outward to eliminate air pockets. Allow the adhesive 24 hours to cure before using the centre console controls. Note: Do not apply heat or excessive pressure during installation. Ensure the factory surface is completely dry to guarantee adhesive bond strength. Ready to Upgrade Your E-Pace? Transform your interior with the precision and style of true motorsport engineering. This carbon fibre console trim is the detail that catches every eye and reminds you why your E-Pace deserves the best. Shop Carbon Fibre Interior Trim Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back ✓ 4.9★ Verified Reviews ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, or any of its subsidiaries or group companies. All product names, logos, and trademarks are the property of their respective owners. ```

Victorious Automotive · Defender L663 · Exterior Lighting Carbon Fibre LED Roof Light Pod for Land Rover Defender L663 2020+ A handcrafted real carbon fibre roof pod housing super-bright LED lighting — engineered to complement the Defender L663's bold roofline while delivering serious visibility on and off the road. Defender L663 2020–2026 Real Carbon Fibre LED Lighting Wireless Remote Aerodynamic Design Defender 90 & 110 No Drilling Required Overview The Land Rover Defender L663 was designed from the ground up to be both iconic and capable. Its angular roofline, squared-off silhouette, and adventure-ready stance make it one of the most recognised vehicles on the road — and one that rewards careful, considered modifications. Additions to the Defender's exterior deserve to enhance its character, not compromise it. This carbon fibre LED roof light pod has been purpose-built for the L663 platform. Handcrafted using real woven carbon fibre, the pod sits flush and proportionate against the Defender's roofline, introducing a motorsport-inspired detail that reads as factory-quality from every angle. The aerodynamic shell minimises wind noise and drag — a consideration that lesser light pods frequently overlook. Whether you're running night trails, overlanding across open terrain, or simply want the best-looking Defender on your street, the LED output here is as functional as the finish is striking. Controlled via wireless remote and wired directly through the fuse box, the setup is clean, tidy, and reversible. No permanent modifications are required to the vehicle's body or structure, meaning your Defender stays exactly as Land Rover intended — only better lit and better looking. What's Included 🪶 Carbon Fibre Roof Light Pod Handcrafted real woven carbon fibre shell with integrated super-bright LED array 📡 Wireless Remote Control Compact RF remote for convenient on/off operation from inside the cabin 🔌 Wiring Loom Pre-assembled wiring for direct fuse box connection — no splicing required 🔧 Mounting Hardware All necessary fixings and brackets included for a secure, rattle-free fit Product Highlights Handcrafted from genuine woven carbon fibre for a premium, lightweight finish Super-bright LED array delivers high-output illumination for night driving and trails Aerodynamic pod profile engineered to minimise wind resistance and cabin noise Wireless RF remote control for convenient in-cabin operation Direct fuse box power connection — clean, reversible, and no relay cutting No permanent modifications required to the Defender's body or roof structure Compatible with both Defender 90 and Defender 110 L663 variants Proportioned to complement the Defender L663's roofline and overall stance Designed for a straight, flush mounting position without overhang or misalignment Each pod is individually finished — small natural variation is a mark of genuine craftsmanship Compatibility Model Code Year Range Fitment Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2022–2026 Direct Fit Defender 90/110 (pre-2020) L316 Pre-2020 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Discovery Sport / Discovery 5 — All Years Not Compatible Installation Notes 📋 Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Basic Hand Tools Park the Defender on a level surface and allow the engine to cool fully before beginning any electrical work. Identify the correct mounting position on the roof rail — refer to the included template or dry-fit the pod before committing to any fixings. Route the supplied wiring loom from the roof through the A-pillar or door seal, keeping the run tidy and away from moving parts. Connect the wiring loom to a suitable fused circuit in the vehicle's fuse box — a switched live is recommended so the lights are only active when the ignition is on. Secure the roof pod using the supplied mounting hardware, ensuring all fixings are tightened evenly to prevent flex or movement at speed. Pair the wireless remote receiver to the RF remote control as per the enclosed instructions, then test full function before finalising the installation. Tuck and secure all wiring, refit any panels disturbed during routing, and perform a final inspection before driving. ⚠ Please Note: Basic DIY wiring experience is recommended. If you are not confident working with automotive electrics, we recommend using a qualified auto-electrician. Due to the handmade nature of this product, minor surface variations in the carbon fibre weave are normal and not considered defects. Installation is the responsibility of the customer. Explore More Defender L663 Upgrades From exterior styling to interior finishing, our full Defender L663 collection brings together the best accessories for owners who refuse to compromise. Every product is hand-selected for fitment quality, finish, and suitability for the platform. Shop Defender L663 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All manufacturer names, model names, and vehicle codes referenced on this page are used solely for the purpose of fitment identification. All trademarks remain the property of their respective owners.

BMW · Interior · Steering Wheel Trim Carbon Fibre M-Sport ABS Steering Wheel Trim Premium interior upgrade with authentic carbon fibre styling for BMW cockpits (2018–2020). 2018–2020 Carbon Fibre ABS Plastic M-Sport Interior Moulding Overview If you own a BMW from 2018 to 2020, the interior is the first thing you and your passengers experience every time you get behind the wheel. Stock steering wheel bezels feel generic and dated. This carbon fibre M-sport ABS steering wheel trim upgrades that critical focal point with aggressive, factory-correct styling that transforms your cockpit instantly. The trim is engineered from premium ABS plastic with a genuine carbon fibre finish, delivering the visual impact of carbon without the weight penalty or cost of true carbon fibre. The LLK2355 model fits seamlessly into the M-sport aesthetic, adding depth and aggression to your dashboard. Available in three finishes—silver, red, and carbon fibre—so you can match your car's personality. Installation is straightforward: the back is pre-fitted with automotive-grade adhesive tape, so no drilling, no glue mess, no permanent modifications. Fits 2018–2020 BMW models. ISO9001 certified manufacturing ensures durability and precision fit. This is the kind of detail that separates enthusiasts from the ordinary. What's Included 📦 Carbon Fibre Steering Wheel Trim LLK2355 model, pre-taped 🔧 Automotive Adhesive Tape Pre-applied, ready to install 🎨 Three Finish Options Silver, red, or carbon fibre ✅ ISO9001 Certified Quality-assured manufacturing Product Highlights M-sport styling integrated into steering wheel bezel Premium carbon fibre finish on durable ABS plastic Lightweight design—only 200g Pre-taped with automotive-grade adhesive Three colour options: silver, red, carbon fibre Fits 2018–2020 BMW models perfectly No drilling or permanent modifications required ISO9001 quality-certified manufacturing Compact dimensions: 30 × 15 × 10 cm Easy 5-minute installation process Fitment & Compatibility BMW Model / Year Compatibility BMW 3 Series (2018–2020) Direct Fit BMW 5 Series (2018–2020) Direct Fit BMW X3 / X4 / X5 (2018–2020) Direct Fit BMW M-Sport Models (2018–2020) Direct Fit BMW Models (2017 or earlier) Not Compatible BMW Models (2021 and later) Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 5 minutes Prepare the steering wheel. Clean the steering wheel bezel area with a soft, dry cloth. Remove any dust, oil, or residue. Position the trim. Align the carbon fibre trim with the steering wheel bezel, ensuring it sits flush and level. Apply the trim. Press firmly from the centre outward to activate the pre-applied adhesive tape. Hold for 30 seconds. Check alignment. Step back and visually confirm the trim is straight and sits evenly on all edges. Let cure. Wait 24 hours before heavy use to allow the adhesive to fully bond. Important: Ensure your steering wheel is clean and dry before installation. Do not apply in temperatures below 10°C or above 40°C, as adhesive performance may be compromised. Upgrade Your Cockpit Today Small details make the biggest impact. This steering wheel trim is the kind of upgrade that catches your eye every single drive—and impresses anyone who gets in your car. M-sport aggression, authentic styling, zero hassle. Add to Cart Use code 22GET20 for 20% off when you buy 2+ items. 4.9/5 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping ✓ Expert support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names and vehicle designations are used for fitment reference only. Product specifications subject to change without notice.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Carbon Fibre Middle Wing Spoiler – Range Rover Sport 2023+ (L461) Real carbon fibre construction, purpose-designed for the L461 – adding rear depth, visual aggression, and motorsport character to the new Range Rover Sport. L461 2023–2026 Real Carbon Fibre Middle Wing Spoiler High-Gloss Finish No Drilling Rear Exterior Direct Fit Overview The Range Rover Sport L461 is one of the most dynamically focused vehicles Land Rover has ever produced – and for owners who want the exterior to reflect that intent, the factory rear profile is only the starting point. The middle wing spoiler zone, sitting between the roof spoiler and the tailgate glass, is one of the most visually prominent areas of the vehicle from the rear, and one of the most overlooked when it comes to personalisation. This Real Carbon Fibre Middle Wing Spoiler has been engineered specifically for the 2023-onwards L461 to fill that space with purpose. Precision-laid from genuine woven carbon fibre and sealed under a deep high-gloss UV-resistant lacquer, it introduces a layered, motorsport-influenced look that elevates the rear three-quarter view without altering the car's clean lines. It sits flush against the body, bridging upper and lower spoiler elements to create a more complete, cohesive stance. Unlike carbon-effect wraps or ABS overlays with printed weave patterns, this is the real material – lightweight, dimensionally stable, and finished to a standard that holds up against direct comparison to OEM SVR and SV styling packs. If you care about your L461 and expect the details to be right, this is the carbon piece the rear of your Sport has been waiting for. What's Included 🪶 Carbon Fibre Middle Wing Spoiler 1x real carbon fibre unit, high-gloss lacquer finish 🔧 3M Automotive-Grade Tape Pre-cut adhesive strips for a secure, clean bond 📋 Fitting Instructions Step-by-step guide for a professional result 📦 Protective Packaging Foam-lined packaging to ensure safe delivery Product Highlights 100% genuine woven carbon fibre – no ABS plastic, no wrap overlay High-gloss UV-resistant lacquer – resists fading, yellowing, and hazing Precision-engineered for the L461 bodyline – flush, factory-quality fitment Lightweight construction – no added bulk or stress on body panels Adds rear visual depth between roof spoiler and tailgate Motorsport-influenced layered rear profile from the kerb No drilling required – clean adhesive bond installation Compatible with all L461 trim levels including SE through SV Weather-sealed finish suitable for all climates and conditions Pairs with carbon rear spoiler, diffuser, and side vent upgrades Compatibility Vehicle Code Year Range Trim Fitment Range Rover Sport L461 2023 – 2026 SE Direct Fit Range Rover Sport L461 2023 – 2026 Dynamic SE Direct Fit Range Rover Sport L461 2023 – 2026 HSE Direct Fit Range Rover Sport L461 2023 – 2026 Autobiography Direct Fit Range Rover Sport L461 2023 – 2026 SV Direct Fit Range Rover Sport L494 2013 – 2022 All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Defender L663 All Years All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Drilling Required Thoroughly clean the mounting surface on the rear of the vehicle using isopropyl alcohol (IPA). Remove any wax, polish, or surface contamination and allow to dry completely. Dry-fit the spoiler against the body panel to confirm alignment and positioning before applying any adhesive. Mark the position lightly if needed. Apply the supplied 3M automotive-grade tape strips to the underside mounting points of the spoiler, or use a suitable automotive-grade adhesive sealant for additional bond strength. Carefully press the spoiler into position, applying firm, even pressure across the full surface. Hold firmly for 60 seconds to ensure initial bond adhesion. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the panel to rain or high-pressure water. Note: Professional installation is recommended to ensure a perfectly flush, gap-free result. Surface temperature should be above 15°C at the time of fitting for optimal adhesive performance. Do not apply in direct sunlight or on a hot panel surface. Complete the Carbon Look on Your L461 This middle wing spoiler is just one piece of the carbon exterior system available for the Range Rover Sport L461. Pair it with our carbon rear roof spoiler, side vents, and rear diffuser for a fully cohesive, high-performance aesthetic. Shop All L461 Exterior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Evoque L538 · Exterior Styling Carbon Fibre Mirror Cover Frame for Range Rover Evoque L538 2012–2017 Precision-formed carbon fibre mirror cover frames that replace your factory housings with a sharper, motorsport-inspired finish — no cutting, no drilling, no compromise. Evoque L538 2012–2017 Carbon Fibre Direct Fit No Modification ISO9001 Certified Bosoner · AJLN1009 Decoration & Protection Overview The Range Rover Evoque L538 arrived as one of Land Rover's most design-forward products — a compact SUV that blurred the line between urban style and genuine off-road pedigree. Its sculpted flanks and bold shoulder line made exterior details matter more than on almost any other vehicle in the Land Rover range. Owners who care about that visual identity understand that even the mirror housings contribute meaningfully to the overall stance of the car. These carbon fibre mirror cover frames from Bosoner are engineered specifically for the first-generation Evoque (L538, 2012–2017) and are formed to the exact profile of the factory housings. The real carbon fibre weave finish is applied under high-pressure moulding to deliver the depth, clarity, and cross-hatched texture that separates genuine carbon from the vinyl wraps and plastic imitations that flood the market. Up close, the difference is immediate and unmistakable. Beyond aesthetics, the carbon fibre construction provides meaningful surface protection — guarding against stone chips, UV fade, and the micro-abrasions that dull painted mirror caps over time. Whether you're building a blacked-out stealth look or simply want to inject a motorsport material into the Evoque's exterior, these covers are a considered, high-impact upgrade that takes under an hour to fit. What's Included 🪞 Left Mirror Cover Frame Driver-side housing, pre-formed to L538 profile 🪞 Right Mirror Cover Frame Passenger-side housing, matched pair 🔧 Fitting Adhesive Tape Pre-applied 3M-grade bonding tape 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine carbon fibre construction with visible weave texture Precision moulded to original Evoque L538 mirror dimensions ISO9001 quality certified manufacturing process No drilling, cutting, or modification required UV-resistant clear coat lacquer over carbon weave Pre-applied 3M-grade adhesive for a secure, lasting bond Significant weight reduction versus OEM painted plastic caps Adds surface protection against stone chips and abrasion Sold as a matched pair — left and right included Compatible with all trim levels of the 2012–2017 Evoque Compatibility Vehicle Code Year Range Fit Range Rover Evoque 3-Door L538 2012–2017 Direct Fit Range Rover Evoque 5-Door L538 2012–2017 Direct Fit Range Rover Evoque Convertible L538 2016–2017 Direct Fit Range Rover Evoque (Facelift) L538 2015–2019 Direct Fit Range Rover Evoque L551 2019–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2017–Present Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: None Thoroughly clean the existing mirror housings with an isopropyl alcohol wipe to remove all wax, grease, and road film. Allow to dry fully before proceeding. Dry-fit both carbon fibre covers against the mirror housings to confirm alignment and check for any fitment anomalies before committing to the bond. Peel the backing from the pre-applied adhesive tape on the reverse of each cover, taking care not to touch the adhesive surface. Align the cover carefully at the top edge of the mirror housing and press firmly into position, working downward to avoid trapping air bubbles beneath the surface. Apply firm, sustained pressure across the entire cover surface for approximately 60 seconds to activate the adhesive bond. Repeat for the second mirror cover. Allow a minimum of 2 hours cure time before driving — 24 hours is recommended in cold or damp conditions. ⚠ Important: Do not wash the vehicle or expose the covers to high-pressure water for at least 24 hours after fitting. Surface temperature should be above 10°C during installation for optimal adhesive performance. Shop the Full Evoque Collection Explore our complete range of interior and exterior upgrades built specifically for the Range Rover Evoque L538 — from carbon trim to protective accessories, all curated by specialists who know these vehicles inside out. Shop Range Rover Evoque L538 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Velar / Evoque / Discovery Sport · Exterior Styling Carbon Fibre Mirror Covers – Range Rover Velar, Evoque & Discovery Sport Achieve the premium SVR carbon look on your Velar, Evoque, or Discovery Sport with precision-cut, high-quality carbon TPU mirror covers — no drilling, no modification required. Carbon TPU SVR Look Velar 2017–2020 Evoque 2016–2020 Discovery Sport 2015–2020 Clip-On Fit No Drilling Two-Piece Set Overview The Range Rover Velar, Evoque, and Discovery Sport are vehicles that reward attention to detail. From their sculpted flanks to their carefully considered proportions, they're designed to be noticed — and the exterior mirror housings are among the most visible styling elements on the vehicle. Yet it's the top-specification SVR and Black Pack models that get the carbon fibre treatment from the factory, leaving many owners of standard-specification cars searching for an accessible way to close that gap. These carbon fibre-effect mirror covers are designed to do exactly that. Precision laser-cut from high-quality carbon TPU, they replicate the genuine carbon weave aesthetic found on Land Rover's highest-trim derivatives. The material delivers excellent resistance to UV fading and weathering, ensuring the finish remains sharp and consistent long after installation. The carbon weave pattern is bold without being overdone — exactly the kind of purposeful detail that complements the character of these vehicles. Installation is intentionally simple. Each cover clips cleanly over your existing mirror housing using the included adhesive tape, with no tools, no drilling, and no permanent modification to the vehicle. The laser-cut precision ensures a flush, factory-quality fit against every contour of the mirror. Whether you're building out a full carbon exterior package or simply looking for one considered upgrade, these covers offer an exceptional result for the effort involved. What's Included 🪞 Left Mirror Cover Carbon TPU, precision laser-cut 🪞 Right Mirror Cover Carbon TPU, precision laser-cut 🔧 Adhesive Tape Pre-cut strips for secure fitment 📄 Fitting Guide Step-by-step installation instructions Product Highlights Precision laser-cut carbon TPU for exact panel alignment Replicates the factory SVR carbon mirror aesthetic Clip-and-adhesive installation — no drilling required Adhesive tape included for a secure, long-lasting bond UV and weather-resistant material for outdoor durability Sold as a complete two-piece set (left and right) Compatible with three popular Land Rover model lines Seamless integration with existing carbon interior packages No permanent modification to original mirror housings Fully reversible — originals remain undamaged beneath Compatibility Vehicle Year Range Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Evoque (L538) 2016 – 2020 Direct Fit Land Rover Discovery Sport 2015 – 2020 Direct Fit Range Rover Evoque (L551) 2019 – present Verify Before Order Range Rover Vogue / Sport L494/L405 All years Not Compatible Land Rover Defender L663 All years Not Compatible Unsure about your specific build year or mirror type? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes ⏱ Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean your existing mirror housing with an isopropyl alcohol wipe and allow to dry completely. Remove any wax, polish, or contaminants from the surface. Test-fit each carbon cover over the mirror housing before applying adhesive, confirming alignment and coverage across all edges. Apply the provided adhesive tape strips to the inner face of each cover, following the contours of the housing. Starting from one edge, press the cover firmly onto the mirror housing, working gradually toward the opposite side to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 1 hour before exposing to rain or a car wash. ⚠ Note: Surface temperature affects adhesive performance. For best results, install in dry conditions above 10°C (50°F). Avoid installation in direct sunlight on very hot days, as this can cause premature adhesive curing before the cover is fully positioned. Complete the Carbon Look These mirror covers pair perfectly with our full range of carbon interior and exterior styling parts for the Velar, Evoque, and Discovery Sport. Browse the full collection for your vehicle or get in touch — our team knows these cars inside out. Shop Velar Accessories Shop Evoque Accessories Shop Discovery Sport Buying two or more items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only.

Victorious Automotive · Defender L663 · Exterior Styling Carbon Fibre Mirror Replacement Caps – Land Rover Defender 90 / 110 / 130 (L663) Full replacement carbon fibre mirror caps engineered to OEM tolerances for the Defender L663 — a no-compromise exterior upgrade that adds real-material presence without a single gram of excess weight. Defender L663 2020–2026 100% Real Carbon Fibre Exterior Styling Full Replacement Unit High-Gloss Finish UV Protected OEM Fitment Defender 90 Defender 110 Defender 130 Overview The Land Rover Defender L663 is a vehicle that rewards precision and intent — every detail matters. From its upright stance and wide-set shoulders to the architectural confidence of its body lines, the Defender commands the road in a way that few modern SUVs can match. It's a platform that responds exceptionally well to considered exterior upgrades, and the mirror caps are one of the most visible contact points between the vehicle's character and the owner's personal specification. These Carbon Fibre Mirror Replacement Caps are crafted from 100% genuine woven carbon fibre — not a vinyl wrap, not an ABS overlay with a carbon-look finish, and not a clip-on cover that sits proud of the original housing. These are full structural replacement units, designed to swap directly with your factory mirror caps and deliver an authentically lightweight, high-specification result. The 2x2 twill weave is finished in deep high-gloss lacquer with UV-inhibiting agents baked in, ensuring the finish stays true through seasons of road exposure. For owners building a blacked-out, sport-focused, or carbon-accented Defender — whether on an X-Dynamic, a V8, or a more restrained SE spec — these caps provide the kind of detail that elevates the overall build without overstating it. They're the choice of owners who know exactly what real carbon fibre looks like and won't accept anything less. What's Included 🖤 Carbon Fibre Mirror Cap – Driver Side Full replacement unit, right-hand fitment 🖤 Carbon Fibre Mirror Cap – Passenger Side Full replacement unit, left-hand fitment 🔧 Installation Accessories Included where required for fitment 📋 Fitment Reference Guide Step-by-step instructions included Product Highlights Genuine 100% real carbon fibre construction — not ABS with carbon-look film 2x2 twill weave pattern with deep, consistent gloss finish across the full surface UV-resistant lacquer coating prevents fading, yellowing, and surface degradation Full replacement units — removes and replaces the factory mirror cap entirely OEM-spec mounting geometry designed exclusively for the Defender L663 platform Significantly lighter than factory thermoplastic housings Compatible with all Defender L663 trim levels including V8 and X-Dynamic No drilling, cutting, or permanent modification required for installation Pairs seamlessly with carbon bonnet vents, roof rails, and black exterior packs Sold as a complete pair — driver and passenger sides included as standard Compatibility Vehicle Model Year Range Trim Fitment Land Rover Defender L663 90 2020–2026+ S, SE, X-Dynamic, X, V8 Direct Fit Land Rover Defender L663 110 2020–2026+ S, SE, X-Dynamic, X, V8 Direct Fit Land Rover Defender L663 130 2020–2026+ S, SE, X-Dynamic, X Direct Fit Land Rover Defender L316 90 / 110 / 130 Pre-2020 All Not Compatible Defender L663 – Aftermarket Mirror Housing Any Any Modified housing Not Compatible Range Rover / Range Rover Sport Any Any All Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–75 minutes  ·  Tools Required: Trim removal tools, T20 Torx, microfibre cloths Ensure the vehicle is parked securely and all mirrors are in the retracted or neutral position before beginning. Using a plastic trim removal tool, carefully prise the factory mirror cap away from the housing — start at the lower rear edge to avoid marking the door panel or surrounding paintwork. Disconnect any wiring clips attached to the factory cap (if applicable on your specific configuration) and set the original cap aside. Align the carbon fibre replacement cap with the mirror housing mount points, ensuring all locating tabs and clips are correctly seated before applying pressure. Press firmly around the perimeter of the cap until all clips engage with an audible click. Reconnect any wiring if previously disconnected. Repeat the process for the opposite side. Inspect both caps from a distance to confirm even alignment and consistent gap to the mirror housing body. ⚠ Note: These are full replacement parts and require removal of the original factory mirror caps. Professional installation is recommended if you are unfamiliar with trim removal on the Defender L663, as incorrect technique may risk damage to the mirror housing, surrounding paintwork, or integrated wiring. Victorious Automotive accepts no liability for damage incurred during self-installation. Refined by Design. Built in Carbon. The Defender L663 is already one of the most purposeful SUVs on the road. These carbon fibre mirror caps are for the owners who know that the details define the build — and who won't settle for anything that looks the part but isn't the real thing. Explore the full Defender L663 exterior collection at Victorious Automotive. Shop Defender L663 Exterior → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Product designs and specifications are subject to change without notice.

Product Description: Upgrade your vehicle with these high-quality carbon fiber mirror caps, designed to fit seamlessly and enhance both appearance and performance. With a sleek, modern aesthetic, these mirrors offer durability and style. Product Highlights: Glossy carbon fiber finish for a contemporary look Lightweight and sturdy construction Easy installation for a perfect fit Boosts aerodynamics and reduces drag Product Specifications: Material: Premium carbon fiber Fitment: Specifically crafted for the Model X Finish: Glossy carbon fiber texture Package Includes: Two carbon fiber mirror caps Notes: Check vehicle compatibility before purchase. Professional installation is recommended for best results.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Upgrade your climate control panel with genuine carbon fibre styling—the SVR look, simplified installation, and premium finish. Velar 2017–2020 Carbon Fibre Climate Control SVR Look Interior Package Overview Your Range Rover Velar deserves an interior that reflects its premium character. This carbon fibre rear air conditioning trim is engineered to elevate the climate control area—a detail that transforms the entire dashboard aesthetic. Built from high-quality carbon TPU with precision laser-cut edges, it delivers the aggressive, purposeful look of SVR models without modification or permanent alteration. Installation takes minutes. The trim simply clips over your existing climate cover, requiring no drilling, adhesives, or professional fitment. Perfect laser alignment ensures a factory-tight finish that integrates seamlessly with your dashboard geometry. Whether you're building a carbon interior package or adding statement detail, this piece combines visual impact with authentic material quality—a hallmark of Victorious Automotive builds. What's Included 🎨 Carbon Fibre Trim Rear A/C panel, precision-cut ✓ Clip-On Fitting No adhesive or drilling needed 📖 Fitting Guide Step-by-step instructions 🛡 30-Day Guarantee Money-back assurance Product Highlights Premium Carbon Fibre TPU Material Laser-Cut for Perfect Fit Clip-Over Installation (No Tools Required) SVR Model Aesthetic Factory-Aligned Edges Non-Permanent Fitment Compatible with 2017–2020 Velar Part of Carbon Interior Packages Durable Protective Coating Worldwide Shipping Available Compatibility Vehicle Year Range Compatibility Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Other Range Rover Models All Years Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Turn off your vehicle and allow the climate control system to cool. Gently locate the existing rear air conditioning trim panel in your climate control area. Position the carbon fibre trim against the original panel, aligning the clip points. Press firmly and evenly until all clips engage and the trim sits flush. Verify that all edges align with adjacent trim panels and dashboard surfaces. Step back and enjoy your new SVR-inspired interior detail. Important: Do not force clips. If resistance is felt, realign the trim and try again. Forcing may damage the clip points. Ready to Elevate Your Velar? This carbon fibre rear air conditioning trim is the detail that transforms a dashboard. Premium material, flawless fit, and the SVR look—all without complexity. Add it to your build today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping — DHL, FedEx, UPS ✓ Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and designs are the property of their respective manufacturers. Product compatibility is based on original equipment specifications; fitment may vary based on vehicle condition and previous modifications.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Rear Air Conditioning Vent Cover for Range Rover Evoque L538 (2012–2017) A precision-cut carbon fibre overlay that transforms the Evoque's rear AC vent surround into a purposeful, high-contrast interior detail — no drilling, no permanent modification. Range Rover Evoque L538 2012–2017 Carbon Fibre Rear AC Vent Interior Trim Direct Fit AJLN1009 ISO 9001 Certified No Drilling Required Overview The Range Rover Evoque L538 redefined compact luxury SUVs when it arrived in 2011, pairing bold exterior design with a cabin that punched well above its class. Yet for owners who live with the Evoque every day, the standard rear air conditioning vent surround — finished in plain gloss black or body-colour plastic — can feel like an unfinished opportunity. It's one of those details that only truly stands out once you've upgraded it. This carbon fibre rear AC vent cover from Bosoner is engineered specifically for the 2012–2017 Evoque L538 to original factory dimensions (model code AJLN1009). Produced from genuine woven carbon fibre with a high-gloss protective lacquer, it overlays the existing vent surround with clean precision, adding visual depth and a motorsport-derived texture that reads as intentional rather than aftermarket. The weave pattern catches ambient cabin light in a way that standard plastics simply cannot replicate. Beyond aesthetics, the carbon overlay adds a tactile layer of surface protection to the vent frame — guarding against the minor scuffs and surface dulling that naturally accumulate on rear passenger trim over time. It's a small upgrade in isolation, but it forms part of a coherent approach to interior refinement that transforms how the Evoque's cabin feels to drive and travel in. What's Included 🪟 Carbon Fibre Rear AC Vent Cover Pre-cut to OEM vent dimensions — model AJLN1009 🔧 3M Adhesive Pre-Applied Industrial-grade backing for a secure, residue-free bond 🧴 Cleaning Wipe Surface preparation wipe included for optimal adhesion 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine woven carbon fibre construction — not vinyl wrap or printed film High-gloss UV-stable lacquer coat protects weave and resists fading Precision cut to OEM rear AC vent dimensions — AJLN1009 specification 3M industrial adhesive backing — no drilling, no clips, no damage to trim Protects original vent surround from scuffs, scratches and daily wear Adds measurable visual depth with authentic motorsport carbon weave texture ISO 9001 certified manufacturing for consistent quality control Lightweight — adds no perceptible weight to rear cabin trim Compatible with all Evoque L538 variants including Si4, eD4 and SD4 trims Pairs naturally with other carbon interior upgrades for a unified cabin look Compatibility Vehicle Generation / Code Years Fit Range Rover Evoque L538 — 5-Door 2012–2017 Direct Fit Range Rover Evoque L538 — 3-Door Coupé 2012–2017 Direct Fit Range Rover Evoque L538 — Convertible 2016–2017 Verify Before Purchase Range Rover Evoque L551 (2nd Gen) 2019–Present Not Compatible Land Rover Discovery Sport L550 2015–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible If you own the 2019-onwards Evoque, browse our dedicated Range Rover Evoque L551 collection for correctly fitted carbon interior upgrades. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None With the vehicle parked and cabin at room temperature, locate the rear air conditioning vent surround between the rear passenger seats. Use the included cleaning wipe to thoroughly degrease the surface of the existing vent trim. Allow to dry completely — approximately 2–3 minutes. Test-fit the carbon fibre cover dry (without removing the adhesive backing) to confirm alignment and positioning before committing. Peel back the 3M adhesive liner approximately halfway. Align the top edge of the cover carefully with the vent surround and press firmly downward. Once positioned correctly, remove the remaining adhesive liner and apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before cleaning or exposing to moisture for best long-term bonding strength. ⚠ Note: Do not apply in temperatures below 10°C (50°F) as this significantly reduces adhesive bonding strength. If fitting in winter, allow the vehicle cabin to warm fully before installation. Do not attempt to remove and reposition once the adhesive has made full contact with the trim surface. Upgrade Your Evoque's Cabin — The Right Way At Victorious Automotive, we only list interior upgrades that we'd fit to our own vehicles. This carbon fibre rear vent cover is a straightforward, reversible improvement that adds genuine quality to the Evoque L538's rear cabin — whether you're building a full carbon interior suite or starting with one considered detail. Shop All Evoque L538 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchase. If in doubt, contact our team on +44 203 943 9919.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Rear Air Steering Wheel Button Frame for Range Rover Evoque L538 2012–2017 A precision-cut real carbon fibre button frame that elevates the Evoque's steering wheel surround with a motorsport-inspired finish — no modification required. Evoque L538 2012–2017 Real Carbon Fibre Steering Wheel Trim Interior Upgrade Direct Fit ISO9001 Certified No Drilling Model: AJLN1009 Overview The Range Rover Evoque L538 arrived as one of Land Rover's most design-forward vehicles — compact, sharp, and unmistakably premium. Owners who chose it understood the importance of detail, and the interior is where that philosophy lives or dies. The steering wheel sits at the centre of every drive, and the button frame surrounding those air and control switches is one of the first things you touch and see every time you get behind the wheel. This carbon fibre rear air steering wheel button frame from Bosoner is designed to replace or overlay the factory-fit surround on the Evoque L538 (2012–2017), bringing a genuine woven carbon fibre aesthetic to a part that rarely receives aftermarket attention. Manufactured to OEM sizing, it seats flush against the original mounting points with no cutting, drilling, or permanent alteration required. The result is a direct-fit upgrade that looks factory-installed from day one. Carbon fibre in an interior context is more than visual — it signals intent. This frame adds a layer of protection to the original plastic surround while transforming the character of the steering wheel from everyday to something considerably more purposeful. If you're building a refined Evoque interior that reflects your attention to detail, this is exactly the kind of part that makes the difference. What's Included 🪶 Carbon Fibre Button Frame Real woven carbon fibre, rear air steering wheel surround 🔧 Fitting Adhesive Pre-applied or supplied 3M-grade backing for secure fitment 📋 Fitment Guide Basic installation reference included in packaging 📦 Protective Packaging Foam-lined box to protect finish during transit Product Highlights Genuine woven carbon fibre construction with clear lacquer finish Precision-cut to original Evoque L538 steering wheel button frame dimensions Designed for 2012–2017 Range Rover Evoque — fits all trim levels of that generation ISO9001 certified manufacturing process for consistent quality control No drilling, no permanent modification — fully reversible installation Protects the original plastic surround from wear, scuffs, and fading Lightweight carbon fibre adds no perceptible mass to the steering wheel Complements carbon fibre, gloss black, and sport interior styling themes Hard-wearing lacquer coat resists fingertip oils and UV discolouration Direct replacement fitment — seats flush with zero proud edges or gaps Compatibility Vehicle Code Year Range Fit Range Rover Evoque Pure L538 2012–2017 Direct Fit Range Rover Evoque Prestige L538 2012–2017 Direct Fit Range Rover Evoque Dynamic L538 2012–2017 Direct Fit Range Rover Evoque HSE L538 2012–2017 Direct Fit Range Rover Evoque Autobiography L538 2012–2017 Direct Fit Range Rover Evoque Convertible L538 2016–2017 Direct Fit Range Rover Evoque (Facelift) L538 2018–2019 Verify Before Purchase Range Rover Evoque (2nd Gen) L551 2019–present Not Compatible Range Rover Velar L560 2018–present Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Begin with the steering wheel in a straight-ahead, centred position. Switch off the ignition and allow any airbag system capacitors to discharge for at least 10 minutes before handling the steering wheel area. Thoroughly clean the existing button frame surround using an isopropyl alcohol wipe or panel prep solution. Remove all oils, dust, and any existing residue. Allow to dry fully before proceeding. Dry-fit the carbon fibre frame against the existing surround to confirm alignment. Check that the button cutouts align precisely with the existing steering wheel controls before committing to adhesion. Peel back the protective film from the adhesive backing (or apply a thin strip of supplied adhesive to the rear of the frame). Press the frame firmly into position, starting from the centre and working outward to eliminate any air pockets. Apply sustained pressure across the full surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 2–4 hours before driving or handling the steering wheel aggressively. Inspect all edges to confirm a flush, gap-free fit. If any edge lifts, apply light pressure with a soft cloth and allow additional curing time. ⚠ Important: This is a cosmetic trim overlay. Do not attempt to disassemble the steering wheel airbag module or remove the steering column covers as part of this installation. If you are unsure about any step, we recommend having this fitted by a trim professional. Always confirm your exact Evoque build date, as early 2018 facelift models may share the L538 chassis but feature a revised steering wheel design. Shop the Full Evoque Collection Explore our complete range of interior and exterior upgrades curated specifically for the Range Rover Evoque L538 — every part selected for fit, finish, and lasting quality. Browse Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are used solely for the purpose of fitment identification and remain the intellectual property of their respective owners. Always verify fitment against your specific vehicle's build date and specification before purchasing.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Cup Holder for Range Rover Velar 2017–2020 Transform your rear cabin with hand-fitted carbon fibre detailing that rivals SVR specification models. Velar 2017–2020 Carbon Fibre Clip-On SVR Look Premium TPU Overview The Range Rover Velar remains one of the most beautifully proportioned luxury SUVs on the road. Its minimalist interior philosophy extends to the rear cabin, where understated climate controls occupy the space between rear seats. If you own a 2017–2020 Velar and want the assertive presence of an SVR variant without the full powertrain commitment, this carbon fibre rear cup holder upgrade is your answer. This is a direct replacement for the standard cup holder cover. Instead of blending with the plastics around it, high-grade carbon fibre TPU creates a striking focal point that catches light and draws the eye downward. The weave pattern reflects attention to detail—the kind you'd find in Range Rover's dedicated performance division. Each piece is laser-cut for absolute precision, meaning zero gaps, zero alignment guesswork, and zero disappointment when it arrives. Installation takes minutes. The new cover simply clips over your existing climate control housing. No tools, no drilling, no modifications to the vehicle. Remove it in seconds if needed. It's the ideal entry point into carbon interior styling, and a perfect pairing for other SVR upgrades like door handles, shift paddles, or centre console trims. What's Included 📦 Carbon Fibre Cup Holder Cover Precision laser-cut TPU with 3K weave finish 🔧 Installation Guide Step-by-step photo instructions included ✨ Cleaning Cloth Microfibre cloth to maintain finish Product Highlights Hand-fitted carbon fibre TPU material for premium durability Laser-cut precision ensures perfect alignment first time Clips over existing climate control housing—no permanent modification Matches SVR interior specification look and feel Lightweight yet rigid construction withstands daily use Authentic 3K carbon weave visible through clear topcoat Weather-resistant material safe for all cabin temperatures Part of Victorious Automotive carbon interior package ecosystem Works seamlessly with factory rear cup holder functionality 30-day money-back guarantee—zero risk to try Compatibility Model Year Range Status Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Range Rover Evoque All Years Not Compatible Range Rover Sport All Years Not Compatible Installation Difficulty: Beginner | Time: 5–10 minutes Power off the vehicle and ensure the cabin has cooled to room temperature. Locate the rear cup holder cover (climate control panel between rear seats). Gently lift the existing cover to expose the clip points underneath. Align the carbon fibre cover with the four mounting clips and press firmly downward until you hear a click at each corner. Verify the cover sits flush with no rocking or movement. Test cup holder functionality. Clean the exposed carbon fibre weave with the included microfibre cloth. Note: The climate control functionality below remains unchanged. This cover sits on top and does not interfere with airflow or controls. If the cover feels loose after installation, remove it and inspect clips for debris. Complete Your SVR Interior Ambition One detail at a time, you can transform your Velar into the high-performance variant you love. This carbon rear cup holder is the perfect starting point—affordable, reversible, and instantly visible to anyone who rides in the rear cabin. Explore All Velar Upgrades Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any parent company. All vehicle names, logos, and trademarks are the property of their respective owners and used for identification purposes only. Product fitment and compatibility are based on manufacturer specifications and field testing. Always verify compatibility before purchase.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Real Carbon Fibre Rear Spoiler – Range Rover Sport 2023+ (L461) A motorsport-grade rear spoiler crafted from genuine woven carbon fibre — engineered specifically for the 2023+ Range Rover Sport L461 to sharpen its rear profile without compromising its factory-line elegance. Range Rover Sport L461 2023–2026 Real Carbon Fibre Rear Spoiler UV-Resistant Gloss OEM Fitment Exterior Upgrade Aerodynamic Styling Overview The 2023+ Range Rover Sport L461 represents one of the most complete driver-focused SUVs Land Rover has ever produced. Its swept rear architecture and dynamic haunches already hint at performance — but for owners who want to take that visual language one step further, this carbon fibre rear spoiler delivers exactly the right statement without overpowering the vehicle's inherent sophistication. Manufactured from genuine high-grade carbon fibre — not a wrapped or painted composite — this spoiler features a deep-weave twill pattern beneath a UV-stable high-gloss lacquer. The result is a finish that won't fade, yellow, or delaminate over time, even when exposed to extended sunlight and temperature cycling. Every panel is hand-finished to ensure the carbon weave is centred and symmetrical before it ever reaches your vehicle. Designed around the L461's roofline geometry and boot lid profile, this spoiler sits flush with the factory bodywork and integrates through existing mounting points — no drilling, no guesswork. Whether you're specifying a Dynamic SE, Dynamic HSE, or Autobiography, the fitment is consistent and precise across all trims. It's the kind of upgrade that looks like it should have come from the factory. What's Included 🪶 Carbon Fibre Rear Spoiler 1 × full-width spoiler, gloss UV-lacquered finish 🔩 Mounting Hardware All fixings and adhesive tape included where required 📋 Installation Guide Step-by-step fitment instructions included 📦 Protective Packaging Foam-lined, secured for international transit Product Highlights Genuine woven carbon fibre — not a wrap, not a composite lookalike Precision-engineered for the 2023+ Range Rover Sport L461 roofline UV-resistant high-gloss lacquer prevents yellowing and delamination Lightweight construction — adds aerodynamic presence without bulk OEM-style mounting points for a clean, factory-integrated fitment Symmetrical twill weave pattern, hand-checked before dispatch No drilling required — works with existing boot lid fixing points Compatible with all L461 trims including Dynamic SE, HSE, and Autobiography Enhances rear downforce aesthetics inline with Sport's design language Weather-sealed finish suitable for all climates and driving conditions Compatibility Model Generation Year Range Trim Fitment Range Rover Sport L461 2023–2026 Dynamic SE Direct Fit Range Rover Sport L461 2023–2026 Dynamic HSE Direct Fit Range Rover Sport L461 2023–2026 Autobiography Direct Fit Range Rover Sport L461 2023–2026 First Edition Direct Fit Range Rover Sport L494 2013–2022 All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Defender L663 All Years All Trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes  ·  Tools: Basic hand tools + isopropyl alcohol Clean the entire boot lid spoiler mounting area thoroughly using isopropyl alcohol and a lint-free cloth. Allow to dry completely before proceeding. Dry-fit the carbon fibre spoiler to the boot lid to confirm alignment against the factory mounting points and verify the panel gaps are even on both sides. If using the provided adhesive tape, peel the backing and carefully position the spoiler from the centre outwards, applying firm, even pressure along the full length of the contact surface. Where OEM fixing points are used, secure the spoiler using the included hardware and tighten to a snug fit — do not overtighten, as this may stress the carbon structure. Allow adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the boot area to water ingress. Note: Professional installation is strongly recommended to ensure optimal fitment and finish. Incorrect surface preparation or panel misalignment may affect adhesion. If in doubt, consult a qualified automotive body specialist or contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop the Full Range Rover Sport L461 Collection This spoiler is just the beginning. Explore our complete range of exterior, interior, and performance upgrades engineered specifically for the 2023+ Range Rover Sport L461 — all backed by our 30-day money-back guarantee and shipped worldwide via DHL, FedEx, UPS, and TNT. View All L461 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Trim Carbon Fibre Replacement Door Handle Covers – Land Rover Defender 110 & 130 (L663) 2020–2024 Full OEM replacement door handle covers precision-moulded from 100% real carbon fibre — delivering a flawless, gloss-finish upgrade that transforms the exterior of your Defender 110 or 130. Defender L663 2020–2024 Real Carbon Fibre Exterior Trim Direct Replacement Gloss Finish UV Protected OEM Fitment 110 & 130 Only Overview The Land Rover Defender L663 is one of the most capable and visually commanding vehicles on the road — and for owners who take its appearance as seriously as its performance, the details matter enormously. The door handles, though functional, are an often-overlooked exterior element that can make or break a premium or blacked-out build. These carbon fibre replacements address that directly. Unlike the adhesive overlays and stick-on wraps that flood the market, these are full replacement covers — precision-moulded from genuine 2×2 twill weave carbon fibre and finished in a deep, high-gloss lacquer. They slot directly into the OEM mounting points of your Defender 110 or 130, delivering an exact fit with no gaps, no guesswork, and no compromise on the factory look — only better. Whether you're building a full carbon-accented specification, pairing with a black pack, or simply looking for an exterior detail that speaks to the quality of everything else on your Defender, these covers deliver precisely that. Lightweight, UV-stabilised, and built to withstand the elements without fading or yellowing — this is the kind of upgrade that once fitted, you'll wonder how the factory didn't do it themselves. What's Included 🖤 4× Carbon Fibre Door Handle Covers Front left, front right, rear left, rear right — full set for all four doors 🔩 Installation Hardware All required fixings and fasteners included where applicable 📋 Fitting Instructions Step-by-step guide for correct removal and installation 📦 Protective Packaging Each cover individually wrapped to ensure safe delivery in perfect condition Product Highlights 100% genuine carbon fibre construction — not ABS wrapped or vinyl overlaid 2×2 twill weave pattern for a classic, high-end carbon aesthetic Deep gloss lacquer finish with UV inhibitors to prevent yellowing Full OEM replacement — removes and replaces factory handles entirely Precision-moulded for exact contour match on L663 body panels No adhesive, no drilling — uses existing OEM mounting points Lightweight carbon construction — no added bulk to the door assembly Fade-resistant and weather-sealed for year-round exterior use Pairs perfectly with black pack, dark atlas, and carbon interior builds Compatible with all L663 trim levels including X, X-Dynamic, and V8 Compatibility Vehicle Model Code Years Trim Levels Fitment Land Rover Defender 110 L663 2020–2024 S, SE, X-Dynamic S, X-Dynamic SE, X, V8 Direct Fit Land Rover Defender 130 L663 2020–2024 SE, X-Dynamic SE, X Direct Fit Land Rover Defender 90 L663 2020–2024 All Not Compatible Defender (Original) L316 Pre-2020 All Not Compatible Installation Notes 🔧 Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Trim removal kit, torx set Using a plastic trim removal tool, carefully release the inner door panel on the first door to gain access to the handle mounting points. Disconnect any wiring connectors attached to the factory door handle (keyless entry sensors, ambient lighting where fitted). Remove the OEM handle retaining bolts or clips using the appropriate torx bit — typically T20 or T25 depending on model year. Slide the factory handle assembly clear of the door skin and set aside. Take note of the sealing arrangement around the aperture. Fit the carbon fibre replacement cover into the same mounting position, ensuring the weave orientation is aligned consistently across all four doors. Reconnect any wiring harnesses, refit retaining hardware, and press the inner door panel firmly back into place until all clips are fully seated. Repeat for all four doors. Inspect each fitted cover for alignment and panel gap consistency before final sign-off. ⚠ Professional Fitment Recommended: These are full OEM replacement covers that require partial door disassembly. If you are not confident working with door internals or wiring, we strongly recommend professional installation by a trim specialist or Land Rover-trained technician to ensure correct alignment and avoid damage to door seals or electronic components. Every Detail, Perfected. The Defender deserves more than off-the-shelf trim. These carbon fibre door handle covers are the kind of detail that defines a build — subtle enough to look factory, premium enough to know it isn't. Shop the full Defender L663 exterior and interior collection at Victorious Automotive. Shop Defender L663 Collection Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purposes of fitment identification and compatibility reference.

Victorious Automotive · Defender L663 · Interior Upgrades Carbon Fibre Replacement Steering Wheel Insert – Land Rover Defender L663 (2020–2024+) A genuine carbon fibre steering wheel insert engineered to replace the factory trim piece on the Defender L663 — delivering a sharper, more purposeful cockpit without compromise. Defender L663 2020–2024+ Real Carbon Fibre Full Replacement OEM Fit Gloss Finish 90 · 110 · 130 All Trim Levels Interior Upgrade Overview The Land Rover Defender L663 is one of the most capable and characterful 4x4s on the road today — and its interior reflects that ambition. But for owners who want to push the cabin aesthetic further, the factory steering wheel insert is an obvious starting point. It sits front and centre in your driving environment, and the standard silver or dark matte finish, while functional, leaves room for something considerably more refined. This carbon fibre insert is a full OEM-style replacement piece — not a stick-on overlay, not an adhesive wrap. It is precision-moulded from 100% genuine woven carbon fibre and finished in a deep, UV-resistant gloss lacquer that holds its depth and sheen through years of daily use. Every curve mirrors the original factory component exactly, so fitment is clean, gap-free, and indistinguishable from a factory specification upgrade. Whether you're building a fully carbon-trimmed Defender interior or simply adding one standout detail, this insert pairs naturally with paddle shifters, centre console surrounds, and dashboard trim panels. It's a small change with a disproportionately large impact on the overall feel of the cabin — the kind of detail that Defender owners who care about their vehicles will notice every single time they get behind the wheel. What's Included 🖤 Carbon Fibre Steering Wheel Insert 1x full replacement piece, gloss finished 🔩 Fitting Clips OEM-spec retention clips where applicable 📋 Installation Guide Step-by-step fitment reference notes 🛡️ Protective Packaging Foam-lined to protect the gloss finish in transit Product Highlights Genuine woven carbon fibre construction — not ABS with carbon print High-gloss UV-resistant lacquer finish — won't yellow, fade, or crack Full OEM replacement piece — no adhesive backing, no overlay Precision-moulded contour match to the L663 steering wheel profile Lightweight — adds zero perceptible mass to the steering wheel Replaces both silver and dark matte factory insert variants Pairs seamlessly with other Victorious carbon interior upgrades Durable enough for daily driving — resistant to heat, UV, and humidity No drilling, cutting, or modification to factory components required Suitable for all L663 body styles — Defender 90, 110, and 130 Compatibility Vehicle Body Style Trim Level Years Fit Land Rover Defender L663 90 S, SE, X-Dynamic, X, V8 2020–2024+ Direct Fit Land Rover Defender L663 110 S, SE, X-Dynamic, X, V8 2020–2024+ Direct Fit Land Rover Defender L663 130 S, SE, X-Dynamic, X 2023–2024+ Direct Fit Aftermarket Steering Wheels Any Any Any Not Compatible Land Rover Defender L316 Pre-2020 Any Pre-2020 Not Compatible Installation Notes ⚙️ Difficulty: Intermediate — Professional Installation Strongly Recommended Estimated workshop time: 45–90 minutes depending on experience. This procedure involves airbag system components — incorrect handling can trigger deployment or cause injury. Always engage a qualified automotive technician. Disconnect the vehicle battery and allow a minimum of 10 minutes for the airbag capacitor to fully discharge before beginning work. Using the appropriate Torx bits, carefully remove the airbag module from the steering wheel centre. Set aside in a safe, flat location — do not expose to impact or static discharge. Disconnect all steering wheel control wiring harnesses, labelling each connector for reassembly reference. Remove the factory steering wheel insert from its retention points. Note orientation before removal. Align the carbon fibre replacement insert, ensuring all clip points and contours seat correctly against the steering wheel frame. Press firmly until all retention clips engage with an audible click. Verify there is no movement or gap around the perimeter. Reconnect all wiring harnesses, refit the airbag module, and torque fasteners to manufacturer specification. Reconnect the battery and confirm all steering wheel controls and airbag warning lights are functioning correctly before driving. ⚠ Safety Notice: This installation involves the steering wheel airbag system. Improper removal or handling of airbag components can result in accidental deployment, serious injury, or damage to the vehicle's SRS system. Victorious Automotive strongly recommends professional installation by a qualified technician. Attempting this procedure without appropriate experience or tooling may void your vehicle warranty. The Details That Define It Every time you sit behind the wheel of your Defender, this is what you'll see. Make it count. Browse the full Defender L663 interior collection and build the cockpit your vehicle deserves — only from Victorious Automotive. Shop Defender L663 Upgrades 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trim designations are used solely for compatibility reference purposes. All products are aftermarket accessories and are not OEM Land Rover parts.

Victorious Automotive · Defender L663 · Exterior Lighting Carbon Fibre Roof Light Pod V2 with LED Lights — Land Rover Defender L663 (2020–2026) A precision-crafted genuine carbon fibre roof pod engineered exclusively for the Defender L663, delivering commanding LED illumination with a motorsport-grade aesthetic that elevates every journey. Defender L663 2020–2026 Genuine Carbon Fibre LED Lighting Version 2 Wireless Remote Aerodynamic Design Non-Destructive Fit Defender 90 & 110 Overview The Land Rover Defender L663 is a vehicle built around capability and character — an icon reimagined for those who demand presence both on and off the road. Whether you're navigating remote trails in the dark or making an impression on urban streets after hours, the standard roofline leaves lighting potential entirely untapped. This roof light pod exists to change that. The Version 2 Carbon Fibre Roof Light Pod is the result of refined engineering and premium material selection. Constructed from genuine woven carbon fibre, it achieves the kind of weight-to-strength ratio that serious builds demand, while projecting the visual signature of a vehicle that means business. The integrated LED light bar cuts through darkness with high-efficiency output, giving you confidence in conditions that would challenge lesser setups. What separates the V2 from generic aftermarket alternatives is the attention to fitment integrity. The pod mounts using automotive-grade 3M adhesive tape, leaving no trace on the vehicle's structure — your Defender stays exactly as it left the factory underneath. Wireless remote operation means you can activate lighting on your terms, without fumbling for interior switches. This is the kind of addition that looks like it always belonged there. What's Included 🪨 Carbon Fibre Roof Light Pod Version 2 — genuine woven carbon fibre construction with integrated LED array 💡 LED Light Bar (Integrated) High-efficiency LEDs pre-fitted within the pod housing 📡 Wireless Remote Control For seamless on/off operation without interior switch modification 🔌 Wiring Loom Pre-terminated wiring for direct fuse box connection 📦 Premium Packaging Inner polyethylene bag and outer carton box — individually packed for transit safety Product Highlights Genuine woven carbon fibre — not a wrap, not a vinyl finish Version 2 design with refined aerodynamic profile over the original High-efficiency LED lights for strong forward illumination Wireless remote control — no interior switch installation required Aerodynamic shaping minimises wind noise and drag at speed Non-destructive fitment — 3M automotive tape, zero roof penetration Compatible with both Defender 90 and Defender 110 variants Preserves original interior design with clean wiring routing Handcrafted construction for a bespoke, one-of-a-kind finish Worldwide shipping via DHL, FedEx, UPS, and TNT Compatibility Model Year Range Body Style Fitment Defender 90 L663 2020–2026 3-Door Direct Fit Defender 110 L663 2020–2026 5-Door Direct Fit Defender 130 L663 2022–2026 Extended 5-Door Verify Before Purchase Defender L316 (Pre-2020) Pre-2020 Classic Body Not Compatible Range Rover Sport L461 2022–2026 — Not Compatible Range Rover Vogue L460 2022–2026 — Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–120 Minutes  ·  Professional Fit Recommended Thoroughly clean and degrease the roof mounting surface using an isopropyl alcohol solution to ensure maximum 3M tape adhesion. Dry-fit the carbon fibre roof pod to the roofline to confirm alignment and mark your positioning reference points before committing. Remove the 3M tape backing and carefully press the pod firmly onto the roof, applying steady even pressure along the full length for 60 seconds. Route the wiring loom along the vehicle's headliner trim panels towards the fuse box — remove trim clips carefully to avoid damage and use conduit where possible. Connect the wiring to an appropriate fused circuit in the engine bay fuse box — refer to your Defender L663 wiring diagram for a suitable ignition-switched or always-on circuit. Pair the wireless remote receiver module to the remote handset as per the included instructions and test all LED functions before refitting trim panels. Refit all interior trim clips and panels, ensuring wiring is fully concealed and routed away from any moving or heat-generating components. ⚠ Important: This product requires DIY wiring experience and a working understanding of automotive electrical systems. Connecting directly to the vehicle's fuse box carries risk if performed incorrectly. If in doubt, we strongly recommend professional installation by a qualified auto-electrician. Installation is the sole responsibility of the customer. This product is handcrafted — minor surface variations may be present and are characteristic of the manufacturing process, not indicative of a defect. Elevate Your Defender. Own the Road. Browse our full collection of premium Defender L663 exterior accessories — each product selected and tested for owners who refuse to compromise on quality or presence. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔁 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Compatibility information is provided in good faith — customers are advised to verify fitment against their specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Seat Decoration Trim – Range Rover Evoque L538 2012–2017 Precision-cut carbon fibre seat surround decoration that adds a purposeful, motorsport-derived aesthetic to the Evoque's interior — fitted directly to OEM mounting points with no drilling required. Evoque L538 2012–2017 Carbon Fibre Interior Trim Direct Fit No Drilling ISO9001 Certified Bosoner AJLN1009 Overview The Range Rover Evoque L538 redefined compact luxury SUVs when it launched in 2011, bringing a bold, design-forward identity that set it apart from anything else on the road. Owners who choose the Evoque aren't after something ordinary — they want a vehicle that reflects their standards in every detail, inside and out. The cabin, though well-appointed from the factory, benefits enormously from focused upgrades that reinforce its sporting character. This carbon fibre seat decoration trim by Bosoner (model AJLN1009) is engineered specifically for the Evoque L538 produced between 2012 and 2017. Manufactured to ISO9001 quality standards, each piece is produced from genuine carbon fibre material — not a vinyl wrap or printed plastic substitute — delivering the distinctive woven weave texture and lightweight rigidity that only real carbon fibre provides. The trim sits flush against the seat surround area, adding a contrast of texture and tone that elevates the interior without overpowering it. Installation is straightforward and tool-free. The pieces are cut to OEM dimensions, meaning they align precisely with the existing seat architecture on the L538. Whether you're looking to personalise a daily driver or add a premium touch before resale, this is a considered, quality addition that will satisfy even the most detail-conscious Evoque owner. What's Included 🪑 Carbon Fibre Seat Decoration Trim Pre-cut to OEM seat dimensions for the Evoque L538 🔧 Fitting Hardware All necessary adhesive backing and mounting aids included 🧴 Surface Preparation Wipe Alcohol cleaning cloth for a clean bonding surface 📄 Installation Guide Step-by-step fitting instructions included in the box Product Highlights Genuine carbon fibre material — not vinyl or printed ABS plastic ISO9001 certified manufacturing for consistent quality control Precision-cut to original Evoque L538 seat dimensions Adhesive-backed fitting — no drilling or permanent modification Adds a motorsport-inspired aesthetic to the standard interior Lightweight construction — no added bulk to the seat area Provides subtle surface protection against everyday contact wear Compatible with both standard and upgraded Evoque seat finishes Colour-stable carbon fibre weave — resistant to fading over time Reversible installation — can be removed cleanly if required Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 (First Gen) 2012–2017 Direct Fit Range Rover Evoque L538 (Facelift) 2015–2018 Direct Fit Range Rover Evoque L551 (Second Gen) 2019–Present Not Compatible Range Rover Velar L560 2018–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Discovery Sport L550 2015–Present Not Compatible If you own the second-generation Evoque, browse our Range Rover Evoque L551 collection for compatible trim options. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Ensure the vehicle interior is at room temperature — cold surfaces can reduce initial adhesive bond strength. Identify the seat surround mounting area on both front seats. Refer to the included installation guide for panel positioning diagrams. Thoroughly clean the target surface using the included alcohol wipe. Allow to dry fully — typically 2–3 minutes — before proceeding. Dry-fit the carbon fibre trim piece against the seat panel to confirm alignment and fitment before removing the adhesive backing. Peel the adhesive backing from the trim piece carefully, then press firmly into position beginning from the centre and working outward to eliminate air pockets. Apply sustained hand pressure across the full surface for approximately 30 seconds to ensure a solid bond. Allow a minimum of 2 hours before subjecting the trim to direct contact or load. Full cure is achieved within 24 hours. Note: Do not apply to freshly valeted or conditioned leather surfaces — residual product can compromise adhesion. Ensure surfaces are completely dry and free from any protectant spray prior to fitting. Upgrade Your Evoque Interior Explore the full range of premium interior and exterior accessories for the Range Rover Evoque L538 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fibre Side Vents — Range Rover Sport L494 (2014–2017) A sharp, purposeful exterior upgrade — carbon fibre look side vents purpose-built for the pre-facelift Range Rover Sport L494, fitting cleanly in place of the factory originals with zero modification required. L494 2014–2017 Carbon Fibre Look Side Vents Exterior Styling Direct Fit DIY Install Pre-Facelift Overview The Range Rover Sport L494, produced from 2013 through to the 2017 model year, is one of the most visually commanding SUVs to have emerged from Solihull. Its wide-set stance, raked roofline and sculpted flanks reward owners who pay close attention to the details — and few areas offer a more impactful upgrade opportunity than the side vents sitting just behind the front wheels. These carbon fibre look side vents are designed as a direct, like-for-like replacement for the factory items on pre-facelift L494 Sport models. Finished in a high-quality carbon look weave, they replace the standard units instantly — adding a performance aesthetic that references the Sport's motorsport-inspired character without the weight or cost of full dry carbon. The result is a subtle but unmistakable visual shift: darker, more defined flanks that complement the Sport's already aggressive profile. Whether paired with gloss black accessories or left to contrast against the factory body colour, these vents read as a considered, enthusiast-led choice rather than an afterthought. What's Included 🪶 Carbon Look Side Vents Pair (left & right), pre-facelift L494 specific fitment 🔩 Fitting Hardware All necessary clips and fixings for a secure OEM-style fit 📋 Fitment Guide Step-by-step installation reference included 📦 Protective Packaging Foam-lined box to ensure safe delivery in transit Product Highlights Purpose-built fitment for L494 Range Rover Sport 2014–2017 only Carbon fibre look finish — high-gloss weave aesthetic Direct OEM replacement — no cutting, drilling or modification Sold as a pair — both driver and passenger side included Lightweight construction — negligible weight addition Compatible with all trim levels across the 2014–2017 model range DIY-friendly installation — achievable in under 30 minutes Complements gloss black, carbon, and dark chrome exterior packs Precision-moulded for flush, factory-finish panel alignment Durable finish resistant to UV fading and weathering Compatibility Model Code Year Range Fit Range Rover Sport L494 2013–2017 (Pre-Facelift) Direct Fit Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible ⚠ Important Fitment Note: These vents are designed exclusively for the pre-facelift Range Rover Sport L494 (2013–2017). The 2018 facelift and all subsequent models feature a revised front bumper and vent surround design — these parts will not fit and should not be ordered for those vehicles. If you are unsure of your exact model year or build, please contact our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool, soft cloth Park on a level surface and ensure the vehicle is switched off. Allow the engine bay to cool if recently driven. Using a plastic trim removal tool, carefully unclip the factory side vent from the bumper surround. Work around the perimeter to release all retaining clips without marking the bodywork. With the original vent removed, clean the mounting recess with a soft cloth to remove any debris or residue before fitting the new unit. Align the carbon look vent into position, ensuring all clip points are correctly located before applying gentle, even pressure to seat each clip fully. Repeat on the opposite side. Run a finger around the perimeter of each vent to confirm a flush, even fit with no gaps or proud edges. Step back and inspect both sides for alignment. Clean the finish with a detailing cloth to remove any fingerprints before driving. ⚠ Tip: A plastic pry tool rather than a metal screwdriver is strongly recommended to avoid scratching the bumper surround during clip removal. Take your time on the first side — the second will feel significantly easier once you understand the clip pattern. Upgrade Your Sport the Right Way These carbon fibre look side vents are one of the quickest and most impactful exterior changes you can make to your pre-facelift Range Rover Sport L494. Explore the full range of Sport exterior accessories at Victorious — built specifically for owners who know the difference. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 Expert advice Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Carbon Fibre Side Vents – Range Rover Sport L461 (2022–2026) Genuine carbon fibre side vents engineered as a direct clip-in replacement for the Range Rover Sport L461 — delivering a sharper, more purposeful exterior profile without a single modification to your vehicle. L461 2022–2026 Real Carbon Fibre UV-Protected Gloss Direct Clip-In Fit Exterior Upgrade All Trims Left & Right Pair Overview The Range Rover Sport L461 is one of the most dynamically compelling vehicles in the Land Rover lineup — a performance-oriented SUV that rewards those who go further with every detail. Its side profile is one of its defining design features, and the factory side vents represent a natural opportunity to introduce a premium material upgrade that elevates the entire exterior language. These carbon fibre side vents are constructed from genuine woven carbon fibre — not a wrap, not a vinyl print, not an ABS imitation. The high-gloss resin coat captures the characteristic cross-hatch weave in full depth, giving the vent faces a three-dimensional, jewel-like quality that shifts with light and angle. The result is a component that reads as a factory-intent upgrade rather than an afterthought accessory. As a direct clip-in replacement for the OEM side vents, these fit without drilling, cutting, or vehicle modification of any kind. They pair seamlessly with carbon fibre bonnet vents, mirror caps, diffusers, and black pack trim for a fully cohesive exterior build — or they stand alone as a subtle but unmistakable step up from standard. What's Included 🖤 Left Carbon Fibre Side Vent Driver-side direct replacement unit 🖤 Right Carbon Fibre Side Vent Passenger-side direct replacement unit 📦 Protective Packaging Foam-lined to protect gloss finish in transit 📋 Fitment Guide Step-by-step installation reference included Product Highlights Genuine woven carbon fibre construction — not ABS, not vinyl, not imitation High-gloss UV-resistant resin coat resists fading, yellowing, and surface cracking Direct clip-in replacement — fits OEM mounting points with no drilling required Sold as a matched left and right pair for a balanced, symmetrical finish Lightweight material reduces mass versus factory plastic components Heat-resistant properties suit engine-adjacent panel placement Compatible with all L461 trim levels from SE through to SV Pairs seamlessly with carbon fibre mirror caps, bonnet vents, and diffusers Complements both body-colour and black pack exterior configurations Each unit quality-checked for weave alignment and gloss surface integrity before dispatch Compatibility Model Generation Year Range Trim Fitment Range Rover Sport L461 2022–2026 SE Direct Fit Range Rover Sport L461 2022–2026 Dynamic SE Direct Fit Range Rover Sport L461 2022–2026 HSE Direct Fit Range Rover Sport L461 2022–2026 Autobiography Direct Fit Range Rover Sport L461 2022–2026 SV Direct Fit Range Rover Sport L494 2013–2022 All Trims Not Compatible Range Rover Vogue L460 / L405 All Years All Trims Not Compatible Defender L663 All Years All Trims Not Compatible Installation Notes Clip-In Replacement · Difficulty: Easy · Estimated Time: 20–30 Minutes Ensure the vehicle is parked on a level surface and the exterior panels are clean and free from debris around the vent area. Using a trim removal tool or flat plastic pry tool, carefully release the factory side vent from its mounting clips — working gently from one edge inward to avoid panel stress. Remove the OEM vent fully and set aside. Take note of clip orientation before proceeding. Align the carbon fibre vent with the factory mounting aperture, ensuring all clip positions correspond correctly before applying pressure. Press firmly and evenly along the vent perimeter until all clips engage with an audible click — confirming flush, secure seating. Repeat for the opposite side, then inspect both vents from distance for alignment symmetry. Note: Professional installation is recommended to ensure perfect flush alignment and to eliminate any risk of surface or panel damage. If you are unsure at any stage, consult a qualified detailer or fitting specialist before proceeding. See It In Action Watch the product fitted to a Range Rover Sport L461 below — including a close-up of the carbon weave finish and clip-in installation process. Precision Detail. Premium Finish. Every component we supply is chosen with one standard in mind: worthy of the vehicle it goes on. Browse the full Range Rover Sport L461 exterior collection and build your carbon fibre configuration piece by piece. Shop All L461 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or acting as agents for Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Range Rover Evoque L538 · Interior Accessories Carbon Fibre Steering Wheel Frame for Range Rover Evoque L538 2012–2017 A precision-fit real carbon fibre steering wheel surround that instantly elevates your Evoque's cabin with a motorsport-inspired finish — no cutting, no drilling, no compromise. Range Rover Evoque L538 2012–2017 Real Carbon Fibre Interior Trim Steering Wheel Frame Clip-Fit Install ISO9001 Certified Bosoner · AJLN1009 Overview The Range Rover Evoque L538 arrived as one of Land Rover's most design-forward vehicles — compact, sleek, and unmistakably modern. Whether you're driving the three-door coupé or the five-door SE, the interior carries a level of refinement that demands equally considered accessories. Every detail inside the Evoque has the potential to speak volumes about the owner's taste. This carbon fibre steering wheel frame surround from Bosoner is designed specifically for the L538 Evoque produced between 2012 and 2017. Cut to the original factory dimensions of your steering wheel trim ring, it overlays the existing housing with a real carbon fibre weave finish — deep, structured, and unmistakably premium. The result is a subtle but highly effective transformation that turns one of the most tactile contact points in the cabin into a genuine talking point. Manufactured to ISO9001 quality standards, this piece is not a generic decal or plastic wrap. It's a structured interior moulding with proper material integrity, engineered to protect the underlying trim while delivering a lasting aesthetic upgrade. If you care about what your hands rest on every time you drive, this is the piece to start with. What's Included 🏎️ Carbon Fibre Steering Wheel Frame Pre-formed surround trim, OEM fit for Evoque L538 2012–2017 🔧 Adhesive Fitting Strips Pre-applied 3M-grade adhesive for secure no-drill installation 📄 Installation Guide Step-by-step fitting instructions included in the box 📦 Protective Packaging Carbon surface protected during transit — arrives ready to fit Product Highlights Real carbon fibre weave construction — not plastic or vinyl wrap Precision-formed to OEM steering wheel frame dimensions for the L538 ISO9001 certified manufacturing — consistent quality control throughout Clip and adhesive fitment — no permanent modifications required Protects the factory trim from daily wear, scuffs and UV fade Motorsport-inspired finish that complements Evoque's Sport and HSE interiors Lightweight carbon structure adds no meaningful weight to the wheel Compatible with all trim levels for L538 Evoque 2012–2017 Colour-matched carbon weave — consistent gloss finish on all surfaces No professional installation required — fits in under 30 minutes at home Compatibility Vehicle Code Years Trim Level Fitment Range Rover Evoque L538 2012–2017 Pure / Prestige / Dynamic / SE / HSE Direct Fit Range Rover Evoque L538 2018–2019 All Trims (Facelift) Verify Before Order Range Rover Evoque L551 2019–2024 All Trims (2nd Gen) Not Compatible Range Rover Velar L560 2017–2022 All Trims Not Compatible Land Rover Discovery Sport L550 2015–2019 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your Evoque on a flat surface and ensure the steering wheel is centred and the ignition is off. Allow the cabin to reach ambient temperature before beginning. Clean the existing steering wheel trim frame thoroughly using an isopropyl alcohol wipe. Remove any dust, oils, or residue and allow it to dry completely — this is critical for adhesive bond strength. Dry-fit the carbon fibre surround frame over your steering wheel housing to confirm alignment and fitment before committing to adhesive. Note any adjustment needed. Peel the backing from the pre-applied adhesive strips on the carbon frame. Align carefully from the top centre of the steering wheel frame downward, pressing firmly as you work around the surround. Apply firm, even pressure across the entire frame for approximately 60 seconds to activate the adhesive bond. Pay particular attention to the edges and corners. Allow 30–60 minutes of cure time before regular use. Avoid aggressive steering input or cleaning for the first 24 hours to allow full adhesion. ⚠ Important: Do not attempt to fit this product while the steering wheel airbag is active or with the engine running. If your vehicle has a heated steering wheel, ensure the heat function is off during installation and for the first 24 hours. Fitting on a cold or damp surface will reduce adhesive performance. Upgrade Your Evoque's Cabin Today The smallest details define how a premium interior feels. Shop the full Range Rover Evoque L538 collection at Victorious Automotive and discover accessories built to the same standard you expect from your vehicle. Shop Range Rover Evoque L538 Accessories Use code 22GET20 — 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification. This product is an aftermarket accessory and does not carry OEM warranty coverage.

Product Description: Elevate the sleek, modern look of your vehicle with these carbon fiber-style door covers, designed specifically for the Model 3. Crafted to offer both style and functionality, these covers are a perfect addition to enhance your car's appearance. Product Highlights: Quick and easy installation with pre-applied adhesive ensures a hassle-free setup. Built from high-quality TPU material for durability and longevity. Features a stylish carbon fiber design that complements the car's aesthetic. Laser-cut precision ensures a perfect fit for your model, enhancing visual appeal. Product Specifications: Material: High-quality TPU Style: Carbon fiber Compatibility: Designed for Model 3 Precision: Laser-cut for an exact fit Package Includes: Four-piece set of door covers Notes: Please ensure the surface is clean and dry before installation for optimal adhesion.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Carbon Fibre Style Door Panel Covers — Range Rover Sport L494 2014–2020 Instantly elevate your Sport's cabin with precision-cut carbon TPU door trim that delivers the flagship SVR aesthetic — no modifications required. Range Rover Sport L494 2014–2020 Carbon TPU SVR Look 4-Piece Set Clip-On Fitment Laser Cut Interior Trim Overview The Range Rover Sport L494 (2014–2020) is one of Land Rover's most driver-focused platforms — a vehicle that sits firmly between everyday usability and genuine performance intent. Owners who choose the Sport already have a discerning eye for detail, and the interior is where that detail matters most. The standard door panel trim, while competent, leaves room for a more purposeful, premium finish — particularly for those who've always admired the carbon-accented cabins of the top-tier SVR variant. These Carbon Fibre Style Door Panel Covers are precision laser-cut from high-quality carbon TPU — a flexible, durable material that faithfully replicates the weave and depth of genuine carbon fibre while remaining forgiving enough for a flawless clip-over installation. Each piece is engineered to sit directly over your existing door trim with no drilling, no adhesive damage, and no permanent alterations to your vehicle's interior. Supplied as a full 4-piece set covering all four door panel areas, these covers form part of our wider Carbon Interior Package for the L494 Sport — meaning they pair seamlessly with other carbon trim pieces across the dashboard, centre console, and steering column for a fully cohesive cabin transformation. What's Included 🚗 Front Left Door Cover Driver-side front door panel trim 🚗 Front Right Door Cover Passenger-side front door panel trim 🚗 Rear Left Door Cover Rear driver-side door panel trim 🚗 Rear Right Door Cover Rear passenger-side door panel trim 📋 Fitting Guide Step-by-step installation instructions Product Highlights Precision laser-cut for an exact, factory-level fit on L494 door panels High-quality carbon TPU material — flexible, durable, and heat-resistant Authentic carbon fibre weave texture and depth — virtually indistinguishable Full 4-piece set covers all four doors for a cohesive cabin upgrade Simple clip-over installation — no drilling, cutting, or adhesive required Reversible fitment — remove and revert to stock at any time Achieves the SVR interior look without SVR price tags Compatible with Part of the wider Victorious Carbon Interior Package No professional tools required — a standard trim removal tool is sufficient Worldwide shipping via DHL, FedEx, UPS, and TNT — tracked and insured Compatibility Vehicle Code Year Range Fitment Range Rover Sport SE L494 2014–2020 Direct Fit Range Rover Sport HSE L494 2014–2020 Direct Fit Range Rover Sport HSE Dynamic L494 2014–2020 Direct Fit Range Rover Sport Autobiography L494 2014–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🛠 Tools Required: Trim Removal Tool (optional) Begin with the front driver's door. Ensure the existing door panel is clean, dry, and free of any wax or polish residue in the trim area. Remove the corresponding carbon TPU cover piece from the set and flex it gently to confirm it aligns with your door panel profile. Starting from one edge, press the cover firmly onto the existing trim. The integrated clips will engage with the panel surface — work across the piece progressively to avoid air bubbles or misalignment. Apply firm, even pressure across the full surface to ensure all clips are fully seated and the cover sits flush. Repeat the process for the remaining three door covers, taking care to match left and right pieces to their correct sides. Once all four pieces are fitted, inspect each panel from multiple angles in natural light to confirm a seamless, factory-level finish. Note: Fitting in warm ambient temperatures (above 18°C) is recommended. Cold conditions can make the TPU material slightly stiffer and harder to seat correctly. Do not force any panel — if resistance is felt, gently warm the piece with a hairdryer on a low setting for 15–20 seconds before refitting. Upgrade Your Sport's Interior Today The SVR look has always been reserved for the top of the Range Rover Sport range — until now. These carbon door covers let every L494 owner bring that same level of interior ambition to their cabin, without the cost of a full model upgrade. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. This product is a carbon fibre style accessory made from carbon TPU and is not manufactured from genuine woven carbon fibre.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Carbon Fibre Style Door Handle Inserts — Range Rover Vogue L460 (2023–2024) Elevate your L460's cabin with precision-fitted carbon fibre style door handle inserts that bring a sharper, more purposeful look to one of the most-touched surfaces in the interior. Range Rover Vogue L460 2023–2024 Carbon Fibre Style ABS Material Peel & Stick Fit Interior Trim No Drilling Required Direct Fit Overview The Range Rover Vogue L460 represents the most architecturally refined generation of Range Rover to date. Its interior is defined by clean horizontal surfaces, sweeping lines, and a deliberate restraint that rewards those who understand it. For owners who want to introduce a layer of sporting character without compromising that refined aesthetic, the details matter enormously. These carbon fibre style door handle inserts are engineered specifically for the 2023 and 2024 L460 Vogue. Each insert has been profiled to match the exact geometry of the factory door pull recess, sitting flush against the surrounding trim for a factory-integrated appearance. The carbon fibre pattern finish is applied to durable ABS substrate — resistant to daily contact, UV exposure, and temperature cycling — so the look stays sharp long after installation. The installation method is intentionally non-invasive. A high-bond adhesive backing bonds directly to the cleaned factory surface without clips, screws, or any modification to the door card. It is the kind of upgrade that looks considered from the factory, yet takes minutes to apply. A small change to a high-frequency touchpoint — and one that makes a genuine difference every time you open a door. What's Included 🪟 Door Handle Inserts Full set — front and rear doors 📦 Retail Box Packaging Presented new-in-box, ready to gift or fit 🔧 Pre-Applied Adhesive High-bond tape pre-fitted to each insert 🧹 Installation Prep Wipe Alcohol-based surface prep included Product Highlights Precision-profiled to fit the L460 Vogue door handle recess exactly Carbon fibre weave pattern finish for a sporting, upscale aesthetic Durable ABS construction resists scratches, UV fading, and heat Peel-and-stick high-bond adhesive — no drilling, no clips, no damage Full set covers all four door handles in one installation session Sits flush to surrounding trim for a factory-integrated appearance Lightweight — adds zero bulk or interference to door operation Compatible with both standard and SWB L460 Vogue body configurations 100% new condition, shipped in protective retail packaging Reversible upgrade — removable without damage to factory surfaces Compatibility Vehicle Model Code Year Range Fit Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L460 2022 Verify Before Order Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2024 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🔧 Difficulty: Beginner Park your Range Rover in a clean, dry environment at room temperature. Avoid installing in direct sunlight or cold conditions below 10°C, as adhesive performance can be affected. Use the included alcohol prep wipe — or a clean isopropyl cloth — to thoroughly clean each door handle recess. Remove all dust, grease, and residue. Allow the surface to fully dry before proceeding. Dry-fit each insert before removing the adhesive backing. Hold it against the recess and confirm alignment and coverage are correct. Peel the adhesive backing from the insert, taking care not to touch the adhesive surface. Align the insert carefully with the recess — position before pressing, as repositioning after contact reduces bond strength. Once aligned, press firmly along the full length of the insert for 30–60 seconds. Apply even pressure across the entire surface, paying particular attention to edges and corners. Repeat for all remaining door handles. Allow 24 hours for the adhesive to fully cure before exposing the inserts to moisture or heavy contact. ⚠ Note: Ensure the factory trim surface is completely clean and dry prior to application. Grease, wax, or polish residue will significantly reduce adhesive bond strength and may cause lifting over time. Do not use wax-based cleaners on the installation area. Explore the Full L460 Collection These inserts are just one part of our growing Range Rover Vogue L460 accessory range. From interior trim upgrades to exterior styling, every piece is chosen for fit, finish, and lasting quality. Shop Range Rover Vogue L460 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify fitment against your specific vehicle configuration before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover L460 / L461 · Interior Styling Carbon Fibre Style Gear Shifter Cover — Range Rover Sport L461 & Vogue L460 (2023–2024) A precision-fitted carbon fibre style trim that elevates the gear shifter surround of your new-generation Range Rover with a sportier, more refined finish — no drilling, no tools, no compromise. Range Rover Sport L461 Range Rover Vogue L460 2023–2024 Carbon Fibre Style ABS Material Peel & Stick Interior Trim No Tools Required Overview The fifth-generation Range Rover Vogue (L460) and the new Range Rover Sport (L461) represent the most refined expressions of Land Rover's design philosophy — a cabin that blends architectural minimalism with cutting-edge technology. Every surface is intentional, and for owners who want to push that interior aesthetic further, the gear shifter surround is one of the most tactile and visually prominent focal points in the console. This Carbon Fibre Style Gear Shifter Cover is designed from the ground up for the 2023–2024 L460 and L461 platforms. Crafted from high-quality ABS with a precisely applied carbon fibre pattern finish, it introduces a purposeful, performance-oriented character to your console without altering any original components. The result is a subtle but immediately noticeable upgrade that sits naturally within the vehicle's premium environment. Installation requires no specialist tools, no adhesive preparation beyond cleaning the surface, and no risk to original trim. The 3M-grade peel-and-stick mounting system ensures a secure, flush bond that is fully reversible — ideal for those who want the look without permanence. Whether you own a Sport in Dynamic specification or a Vogue in its most luxurious trim, this cover delivers a consistent, cohesive result. What's Included 🎯 Gear Shifter Cover × 1 Carbon fibre style ABS trim, pre-fitted with adhesive backing 🧽 Installation Guidance Surface prep and fitment instructions included Product Highlights Precision-engineered fitment for L460 and L461 gear shifter surrounds Carbon fibre weave pattern finish for a premium, motorsport-inspired aesthetic Manufactured from durable high-grade ABS plastic for long-term resilience Pre-applied peel-and-stick adhesive — no drilling or permanent modifications Flush, factory-like finish that integrates seamlessly with original trim Lightweight construction adds no perceptible weight to the console Compatible with all trim levels across the L460 and L461 range Fully reversible — original trim remains undamaged beneath Resistant to daily wear, UV exposure, and interior temperature fluctuation Brand new, boxed condition — ready to install upon delivery Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Sport L461 2023–2024 Direct Fit Range Rover Vogue L405 2013–2022 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 5–10 Minutes  ·  🔧 Tools Required: None Ensure the interior of your vehicle is at room temperature — avoid installation in cold or damp conditions, as this can affect adhesive performance. Clean the gear shifter surround thoroughly using a lint-free microfibre cloth. Remove any dust, grease, or residue from previous products. Allow the surface to dry completely. Dry-fit the carbon fibre cover over the gear shifter surround before committing, to confirm correct alignment and positioning. Peel back the protective film on the adhesive layer carefully, taking care not to contaminate the adhesive surface. Align the cover precisely over the gear shifter surround, working from one end to the other to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure a strong bond between the cover and the original trim. Allow the adhesive to cure for a minimum of 1 hour before normal use of the gear selector. ⚠ Note: Do not attempt installation on a wet, oily, or recently polished surface. Avoid using chemical cleaners directly on the carbon fibre finish, as harsh solvents may dull the pattern over time. A damp microfibre cloth is sufficient for routine cleaning. Explore the Full L460 & L461 Interior Collection This gear shifter cover is just the beginning. Victorious Automotive stocks a full range of precision-fit interior trim upgrades for the new Range Rover and Range Rover Sport — from dashboard overlays to door panel accents, all engineered to match the standards your vehicle demands. Shop Range Rover Sport L461 → Shop Range Rover Vogue L460 → Buying two items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced (including Range Rover, Range Rover Sport, L460, L461) are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase. If in doubt, contact our team on +44 203 943 9919.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Carbon Fibre Style Storage Trim for Range Rover Vogue L460 2023–2024 A precision-fitted ABS carbon fibre finish trim that elevates your L460's storage area with a purposeful, modern aesthetic — no modifications required. Vogue L460 2023–2024 Carbon Fibre Style ABS Material Interior Trim Direct Fit No Drilling Scratch Resistant Overview The Range Rover Vogue L460 represents the pinnacle of Land Rover's luxury saloon lineage — a vehicle where every interior surface is expected to meet an exceptionally high standard. Owners of the 2023 and 2024 model years in particular have come to expect nothing less than a cabin that feels cohesive, refined, and unmistakably premium at every touchpoint. This carbon fibre style storage trim is designed specifically for the L460 platform, engineered to sit flush against the existing storage fascia without the need for cutting, drilling, or adhesive guesswork. Manufactured from high-grade ABS with a precision-applied carbon fibre weave finish, it introduces an understated sporting character to an interior that is already one of the most sophisticated in the segment. Whether you're complementing a factory Black Pack, contrasting against a lighter interior colour scheme, or simply refreshing worn factory trim, this piece integrates seamlessly. The scratch and wear-resistant surface ensures the finish holds up to daily use, keeping the cabin looking exactly as it should — immaculate. What's Included 🪄 Carbon Fibre Style Storage Trim 1x full trim piece, pre-finished and ready to fit 🔧 Fitting Hardware Pre-applied adhesive clips for secure installation 📋 Installation Guide Step-by-step instructions included in the box 🧤 Protective Packaging Double-wrapped to ensure zero transit damage Product Highlights Precision-engineered for L460 storage fascia — direct factory-match fit High-grade ABS construction with a durable carbon fibre weave finish Scratch, scuff, and wear-resistant surface for long-term interior integrity Tool-free installation — clips into place in under 30 minutes No permanent modifications, adhesive bonds, or drilling required Adds sporting character without compromising the luxury aesthetic Fully reversible — original trim can be reinstated at any time Compatible with all L460 trim levels including SE, HSE, Autobiography, and SV Maintains full access to storage compartment functionality post-installation Designed and quality-checked to Victorious Automotive's interior fitment standards Compatibility Model Code Year Range Trim Level Fitment Range Rover Vogue L460 2023–2024 SE / HSE Direct Fit Range Rover Vogue L460 2023–2024 Autobiography Direct Fit Range Rover Vogue L460 2023–2024 SV Direct Fit Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Sport L461 2022–2024 All Not Compatible Range Rover Sport L494 2013–2020 All Not Compatible Defender L663 2020–2024 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Ensure the interior is at room temperature — cold conditions can reduce initial clip adhesion. Allow the vehicle to warm naturally if stored overnight in a cold environment. Clean the existing storage trim surface thoroughly using an isopropyl alcohol wipe or a clean, lint-free cloth. Remove any dust, grease, or residue before proceeding. Dry-fit the carbon fibre style trim piece first to confirm alignment and verify all clips correspond with the factory mounting points. Starting from one corner, press the trim firmly into position, working across the panel in a single, steady motion. Apply firm even pressure along the full length to engage all clips simultaneously. Run your fingertip along each edge to confirm full seating. There should be no flex, gap, or movement once correctly installed. Leave undisturbed for 30 minutes before normal use to allow any pressure-sensitive elements to fully set. ⚠ Important: Verify your exact vehicle build date and trim specification against the compatibility table above before installation. The L460 was introduced in late 2022 — please confirm your model year matches the 2023–2024 specification. If you are unsure, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment for your specific VIN. Complete the Look of Your L460 Browse the full Victorious range of interior and exterior accessories engineered specifically for the Range Rover Vogue L460 — curated for owners who refuse to compromise. Shop All L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. All products are aftermarket accessories and not OEM parts.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre Window Controls Frame for Land Rover Range Rover Evoque 2012–2017 A precision-cut carbon fibre interior trim panel designed to replace the factory window controls surround on the Range Rover Evoque L538 — adding a distinctly sporting, high-tech aesthetic to one of the cabin's most-touched surfaces. Evoque L538 2012–2017 Carbon Fibre Interior Trim Window Controls Frame Direct Fit No Drilling ISO9001 Certified AJLN1009 Overview The Range Rover Evoque L538 arrived in 2011 as a bold, design-forward compact SUV that quickly built a loyal following among drivers who wanted Range Rover presence in a more agile package. The interior — in particular the door panel area surrounding the window and mirror controls — is a highly visible surface that owners interact with on every journey. Over time, the factory finish can show wear or simply feel at odds with a more personalised cabin aesthetic. This carbon fibre window controls frame from Bosoner (model AJLN1009) is engineered specifically to the original dimensions of the Evoque L538's door panel, covering the factory surround with a clean, genuine-look carbon fibre finish. The weave pattern delivers that characteristic depth and sheen associated with motorsport-grade materials, transforming a frequently touched detail into a visual focal point without any permanent modification to your vehicle. Manufactured to ISO9001 quality standards, the trim uses a 3M-grade adhesive backing that bonds securely to the factory surface and resists vibration, UV fading, and everyday handling. If you're building a cohesive dark or sport-themed interior, this piece sits naturally alongside carbon fibre gear surround trims, dashboard overlays, and door handle covers — all available in the Evoque collection at Victorious. What's Included 🪟 Window Controls Frame Carbon fibre overlay panel, cut to OEM dimensions for the Evoque L538 door panel 🔲 Pre-Applied Adhesive 3M-grade backing tape pre-fitted for clean, tool-free installation 🧽 Cleaning Wipe Surface prep wipe included to ensure a strong, lasting bond 📄 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Genuine-look carbon fibre weave finish with deep gloss clarity Precision-cut to OEM dimensions — no trimming or modification required Pre-applied 3M-grade adhesive for a secure, lasting bond Tool-free installation — no drilling, no clips, no professional fitting needed ISO9001 certified manufacturing for consistent quality control UV-resistant coating prevents fading and dulling over time Scratch and abrasion resistant surface — ideal for high-touch areas Fully reversible — can be removed without damaging the factory panel Pairs seamlessly with other Evoque carbon fibre interior trim pieces Lightweight construction — zero impact on door mechanism or electrics Compatibility Vehicle Model Code Year Range Compatibility Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Evoque L538 2018–2019 Verify Before Purchase Range Rover Evoque L551 (2nd Gen) 2019–2025 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Park your Evoque in a clean, dry environment at room temperature. Cold or damp conditions can reduce initial adhesive strength. Use the included cleaning wipe (or isopropyl alcohol) to thoroughly degrease the factory window controls surround on the door panel. Allow to dry completely — at least 60 seconds. Dry-fit the carbon fibre frame over the factory panel to confirm alignment before committing. Note the orientation and any cutouts around buttons or controls. Peel back a small section of the adhesive backing and carefully align the trim piece to the top or one edge of the factory surround before pressing down progressively across the surface. Apply firm, even pressure across the entire panel for 30–60 seconds to fully activate the adhesive bond — use the heel of your hand rather than fingers to avoid uneven pressure points. Allow 24 hours before washing the vehicle or exposing the trim to prolonged moisture, giving the adhesive time to fully cure. Note: If your Evoque has an aftermarket door panel, a previous adhesive residue, or a textured fabric insert around the controls area, surface adhesion may vary. Clean thoroughly and consider a small patch test before full application. For late 2017 or 2018 facelift Evoque models, please confirm your door panel style matches the pre-facelift design prior to ordering. Upgrade Your Evoque Interior Browse the full Range Rover Evoque L538 interior collection at Victorious — from carbon fibre dashboard trims to gear surround overlays, curated for owners who care about every detail. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify fitment against your specific vehicle's build date and trim specification before purchase.

Premium Auto Interior · Tesla Model 3 · Trim Accents Carbon Fibre Window Switch Trim for Tesla Model 3 2018–2019 Four-piece pre-applied window switch trim set with premium carbon or silver finish—elevate your Model 3 interior in minutes. Model 3 2018–2019 TPU Carbon Fiber Interior Trim Pre-Applied Adhesive Overview The Tesla Model 3 benefits from thoughtful interior refinement, and window switches are the perfect accent point to elevate your cabin's visual impact. This four-piece carbon fibre trim set is engineered to frame your window controls with a sleek, modern aesthetic that complements both the minimalist Tesla interior and your personal driving style. Crafted from premium TPU material, each trim piece delivers durability and a sophisticated appearance in either bold Carbon or sleek Silver finish. The pre-applied adhesive backing ensures installation is straightforward—no additional tools, no expertise required. Clean the surface, position, and press. Your Model 3 interior is transformed. Whether you're refining the smallest details or making a statement with premium accents, this trim set is built for owners who understand that luxury lives in the details. What's Included ⚙️ Four-Piece Trim Set One for each window switch location ✦ Pre-Applied Adhesive Backing Ready to install straight from packaging 🎨 Carbon or Silver Finish Choose your preferred aesthetic 📦 Premium TPU Material Durable, long-lasting surface protection Product Highlights Sleek carbon fibre design elevates interior aesthetics instantly Premium TPU construction resists wear, scratches, and fading Two finish options: Carbon or Silver to match your taste Perfect fit for Model 3 2018–2019 window switch locations Pre-applied adhesive—no messy application required Maintains factory appearance while adding visual depth Easy to install in under 5 minutes Compatible with factory interior without modification Enhances cabin cohesion and attention to detail Built to last the lifetime of your vehicle Compatibility Model Years Compatibility Tesla Model 3 2018–2019 Direct Fit Tesla Model 3 2020+ Not Compatible Tesla Model Y All Years Not Compatible Tesla Model S All Years Not Compatible Installation Difficulty Level: Beginner | Time: 5 minutes Prepare the surface: Clean each window switch location with a soft, dry cloth. Ensure no dust, dirt, or residue remains for optimal adhesive contact. Position the trim: Carefully peel back the adhesive backing from the first trim piece. Align it precisely with the window switch frame. Apply firm pressure: Press down firmly for 10–15 seconds, working from the centre outward to eliminate air bubbles. Repeat for remaining trims: Follow the same process for the remaining three trim pieces, one at a time. Allow adhesive to set: Wait 24 hours before operating windows or cleaning the area to ensure full adhesion strength. ⚠️ Important: Do not attempt installation on wet or contaminated surfaces. Clean thoroughly with isopropyl alcohol if required, then allow 30 minutes for complete drying before adhesive contact. Elevate Your Model 3 Today Premium interior details transform your daily drive. This carbon fibre window switch trim set is the finishing touch your Tesla Model 3 deserves—crafted for owners who demand quality and precision in every accent. Shop Window Switch Trim Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping ✓ 4.9/5 Stars – 12,300+ Reviews Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Tesla, Inc., or any official Tesla subsidiary. All vehicle names and designations are used for identification and compatibility reference only. Product fitment and performance are warranted by Victorious Automotive alone.