Products

Jetour · Traveller T2 · Interior Door Handle Decorative Frame for Jetour Traveller T2 2023–2025 Precision-engineered interior protection frame that upgrades your door handles with premium fit and lasting durability. Jetour Traveller T2 2023–2025 Interior Trim OEM Fit Protective Frame Overview The Jetour Traveller T2 is engineered for serious adventure. Every detail matters—from suspension geometry to interior integration. Your door handles take daily impact, and factory finishes can wear. This decorative frame isn't cosmetic theater; it's structural protection wrapped in precision craftsmanship. This door handle frame is molded using original vehicle structural data. We've reverse-engineered the factory geometry at 1:1 ratio, ensuring the lines flow seamlessly with your cabin. No gaps. No misalignment. No shortcuts. The frame sits flush against door panel contours, integrating so naturally that most owners forget it's an upgrade. Built from environmentally friendly materials with full-spectrum color coverage, the finish resists fading and maintains gloss even under harsh UV exposure and cabin heat cycles. Whether you're crossing desert or navigating urban chaos, this frame protects the handle zone where fingers make contact 50+ times daily. What's Included 🖼️ Door Handle Frame OEM-fit protective surround 🧴 Installation Adhesive Pre-applied or separate 📋 Fitment Guide Step-by-step instructions Product Highlights Original vehicle mold data ensures zero deviation from factory geometry 1:1 scale pattern matching—lines align perfectly with cabin structure Eco-friendly material formulation with zero VOC emissions Full-spectrum color saturation for premium appearance UV-resistant gloss finish—no fade even in extreme climates Precisely engineered for 2023–2025 Traveller T2 models Seamless cabin integration with no visible gaps or misalignment Durable polymer blend rated for 150,000+ km exposure Protects handle contact zone from scratches, sweat, and wear Direct drop-in fit—no drilling, trimming, or modification required Compatibility Model Year Fitment Jetour Traveller T2 2023 Direct Fit Jetour Traveller T2 2024 Direct Fit Jetour Traveller T2 2025 Direct Fit Jetour Traveller T2 (Pre-2023) 2022 and earlier Not Compatible Unsure about your fitment? Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT) and we'll verify compatibility before you order. Installation Notes Difficulty: Beginner | Time: 15–20 minutes Prepare the door panel. Clean the handle surround area thoroughly with a microfiber cloth. Remove any dust, oils, or residue. Test fit the frame. Dry-fit the decorative frame against the door handle zone to verify alignment and gaps. Apply adhesive. If not pre-applied, apply a thin, even bead of the included adhesive around the frame perimeter. Position and press. Carefully align the frame with the handle geometry and apply firm, even pressure for 60 seconds. Cure time. Allow 24 hours before opening doors or exposing to moisture. ⚠️ Important: Do not force the frame into position. If gaps appear, lift and reposition. Excessive pressure may damage the panel finish. If unsure, contact support for guidance. Upgrade Your Interior Today Precision protection meets premium aesthetics. This door handle frame integrates so naturally, your Traveller T2 cabin feels factory-enhanced, not aftermarket. Shop Now Use code 22GET20 for 20% off any 2 items 12,300+ verified reviews 4.9/5 average rating 30-day money-back guarantee Worldwide DHL, FedEx, UPS shipping Victorious Automotive is an independent accessory specialist and is not affiliated with Jetour, Chery Automobile, or their parent companies. All product names and vehicle designations are trademarks of their respective owners. This product is designed to enhance your vehicle; installation and use are your responsibility. ```

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Door Lock Bracket Protective Cover – Toyota Land Cruiser 250 / Prado LC250 (2024+) A precision-engineered stainless steel cover that shields your LC250's door lock bracket from corrosion while delivering a polished, factory-refined interior aesthetic. LC250 2024 Prado Stainless Steel Anti-Rust Direct Fit No-Drill Install Interior Trim 3 Finish Options Overview The Toyota Land Cruiser 250 — also sold as the 2024 Prado in select markets — represents a significant return to form for Toyota's iconic nameplate. Engineered for serious terrain while offering a premium, well-appointed interior, the LC250 attracts owners who expect every detail to meet an exacting standard. That includes the areas most people overlook — like the door lock bracket housing, which is exposed to daily wear, moisture ingress, and the gradual onset of surface corrosion. This Door Lock Bracket Protective Cover is designed specifically to address that vulnerability. Crafted from durable stainless steel and available in Black, Silver, and a Fiber Pattern finish, it fits flush over the existing bracket with no modification required — using a clean adhesive installation that leaves no trace if removed. Whether your LC250 is a daily driver, a weekend off-road build, or a long-haul expedition vehicle, this cover ensures the door lock area stays protected and presentable for the long term. Small details define great interiors. This cover doesn't just prevent rust — it actively elevates the visual quality of your door panel, giving the lock bracket a finished, intentional appearance that complements the LC250's cabin design philosophy. What's Included 🔒 Door Lock Bracket Cover 1 × protective cover — choose Black, Silver, or Fiber Pattern 🧲 Pre-Applied Adhesive 3M-grade backing tape for clean, secure fitment 🧽 Surface Prep Wipe Alcohol cleaning wipe for optimal adhesion 📄 Installation Guide Step-by-step instructions included in the box Product Highlights Precision-engineered for the 2024 Toyota Land Cruiser 250 / Prado LC250 High-grade stainless steel construction resists corrosion and daily wear Available in Black, Silver, and Carbon Fiber Pattern to suit your trim No-drill, no-clip adhesive installation — completely reversible Protects the door lock bracket from moisture, grit, and surface rust Seamless flush fit that looks factory-installed from day one Lightweight profile adds zero bulk to the door panel Withstands interior temperature cycling and UV exposure over time Complements both stock and upgraded LC250 interior packages Ideal for owners who detail their vehicle and demand consistency throughout Compatibility Vehicle Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024–Present Direct Fit Toyota Land Cruiser Prado (250 Series) LC250 Prado 2024–Present Direct Fit Toyota Land Cruiser 300 LC300 2021–Present Not Compatible Toyota Land Cruiser 200 Series LC200 2007–2021 Not Compatible Toyota Land Cruiser Prado 150 LC150 2009–2023 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Beginner Open the vehicle door and locate the door lock bracket on the interior door panel. Use the included alcohol wipe to thoroughly clean the bracket surface and surrounding area. Allow 60 seconds to dry completely. Peel the backing from the pre-applied adhesive on the reverse of the protective cover. Align the cover carefully over the door lock bracket, ensuring all edges sit flush against the door panel. Apply firm, even pressure across the cover for 30–60 seconds to activate full adhesion. Allow a minimum of 2 hours before operating the door lock repeatedly — ideally leave overnight for maximum bond strength. ⚠ Note: Ensure the door panel surface is completely dry and free from wax, grease, or cleaning residue before applying. Installation in temperatures below 10°C (50°F) may reduce adhesive performance — warm the surface gently if needed. Verify your exact LC250 build year and trim level before purchasing. Complete Your LC250 Interior This cover is part of a growing range of LC250 interior accessories at Victorious Automotive. Browse the full collection to refine every detail of your Land Cruiser's cabin — from trim accents to functional upgrades. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Tesla · Model 3 · Interior Protection Door Lock Cover Rust Protection – Tesla Model 3 Premium chrome and carbon fiber covers that shield your Model 3's door locks from rust and environmental wear while maintaining a refined, factory-matched aesthetic. Model 3 2017–2024 Chrome & Carbon Fiber Interior Protection Set of 4 Overview Your Tesla Model 3 deserves protection against the daily elements that accelerate wear. Door lock mechanisms are vulnerable to moisture, salt, and oxidation—especially in coastal or winter-driven regions. Over time, exposed locks develop rust and corrosion, compromising both function and curb appeal. Our Door Lock Cover set delivers professional-grade protection in two premium finishes: polished chrome for a classic, elegant look, or carbon fiber for modern performance aesthetics. Each cover is engineered to fit seamlessly within your Model 3's existing design language, maintaining the clean lines that define the vehicle. Installation is straightforward and requires no modification to your door assembly. With proper fitment, these covers provide continuous defence against moisture ingress, salt spray, and UV degradation—extending your lock mechanisms' operational lifespan and preserving resale value. What's Included 🛡️ Set of 4 Covers One per door lock ✨ Dual Finish Options Chrome or carbon fiber 📋 Installation Guide Step-by-step instructions 🔒 Easy Attachment No tools or drilling required Product Highlights Advanced rust and corrosion prevention for extended lock life High-grade chrome or authentic carbon fiber finishes Seamless design integration with Model 3 factory aesthetics UV-resistant materials resist fading and discoloration Tool-free installation in minutes per door Waterproof construction prevents moisture infiltration Factory-matched fitment eliminates gaps and rattles Protects resale value by maintaining lock assembly integrity Lightweight, non-invasive design preserves door functionality Works with all Model 3 lock types and handle designs Compatibility Tesla Model 3 Variant Model Years Status Model 3 Standard Range 2017–2024 Direct Fit Model 3 Long Range 2017–2024 Direct Fit Model 3 Performance 2017–2024 Direct Fit Model 3 RWD (2023+) 2023–2024 Direct Fit Model Y (Any Variant) 2020+ Not Compatible Compatibility Tip: Confirm your vehicle's production year and trim variant before ordering. All standard, long-range, and performance Model 3 variants built between 2017–2024 are compatible with this set. Installation 📦 Difficulty: Beginner | Time: 15–20 minutes Prepare the area: Clean all four door lock mechanisms with a soft, dry cloth to remove dust and debris. Ensure surfaces are completely dry before attachment. Check alignment: Hold each cover against its corresponding lock to verify proper fit. Covers should sit flush without gaps or overhang. Apply adhesive backing: If covers feature pre-applied adhesive, carefully remove the protective film. For mechanical fastening, align mounting points with lock housing. Secure the cover: Press firmly into place for 10–15 seconds per cover, ensuring full contact across all edges. Do not over-torque fastening points. Final inspection: Verify that all four covers are level, secure, and visually aligned. Test door lock actuation to confirm no interference with mechanism operation. Allow curing: If adhesive-backed, allow 24 hours before exposing covers to moisture or high-use conditions. Note: Do not force covers if fitment feels tight. Forcing can crack the cover or damage the lock assembly. If resistance is encountered, stop and inspect alignment. Protect Your Model 3. Elevate Its Presence. Door lock covers are a small detail with outsized impact. They're the difference between a lock mechanism that deteriorates and one that endures. Order now and lock in superior protection—backed by our 30-day, no-questions-asked guarantee. Shop Model 3 Protection Use code 22GET20 for 20% off when you buy 2 or more items. ⭐ 4.9 / 5 stars from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✅ 30-day guarantee – full refund, no hassle 📞 +44 203 943 9919 – Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by, or connected to Tesla, Inc., Elon Musk, or any official Tesla subsidiary. Tesla is a registered trademark of Tesla, Inc. All vehicle names, logos, and specifications are used solely for compatibility and reference purposes. Product descriptions and claims are the responsibility of Victorious Automotive and do not reflect official Tesla product standards or support.

Victorious · Toyota Land Cruiser LC300 · Interior Protection Door Protective & Speaker Cover For Toyota Land Cruiser LC300 Carbon fibre door and speaker protection that elevates interior aesthetics while shielding wear points from daily use. LC300 2021–2024 Carbon Fibre Design ABS Material Easy Installation Overview The Toyota Land Cruiser LC300 is a commanding presence on and off-road, and your interior deserves the same level of refinement as the rest of your vehicle. These door protective and speaker covers are engineered to complement the LC300's bold design language while providing critical protection against scuffs, impacts, and daily wear. Finished in a premium carbon fibre pattern, this interior upgrade doesn't just protect—it transforms. The sleek, modern aesthetic works seamlessly with both stock and customised LC300 cabins, adding a layer of visual sophistication that catches light and elevates your driving environment. Constructed from durable ABS plastic with UV-resistant coatings, these covers resist fading, cracking, and warping. The adhesive backing system ensures long-term adhesion without damage to original trim, and the precision fit means no gaps, overlaps, or movement under use. What's Included 📦 1 Set Door & Speaker Covers Complete coverage for all door speaker apertures 🧼 Cleaning Prep Cloth Ensures optimal adhesive surface for installation Product Highlights Direct fit for LC300 2021–2024 model years Premium carbon fibre surface texture Durable ABS construction with UV protection Protects doors from impact, scuffs, and wear Easy peel-and-stick adhesive application No drilling or permanent modifications required Seamless integration with OEM interior trim Long-lasting finish resistant to fading Precision-engineered fit without gaps Reversible—removable without residue Compatibility Model & Year Compatibility Toyota Land Cruiser LC300 2021 Direct Fit Toyota Land Cruiser LC300 2022 Direct Fit Toyota Land Cruiser LC300 2023 Direct Fit Toyota Land Cruiser LC300 2024 Direct Fit LC250 & Earlier LC300 Generations Not Compatible Installation Difficulty: Easy | Time: 30–45 minutes Prepare the surface: Clean all door trim and speaker aperture areas with the included prep cloth. Remove any dust or residue and allow to dry completely. Position the covers: Start with the driver-side door. Align the cover against the aperture and check fit before peeling the backing. Apply adhesive: Slowly peel the backing tape and press the cover firmly into place, working from the centre outward to avoid air pockets. Repeat for all doors: Follow the same process for passenger doors and speaker covers. Set and cure: Allow 24 hours before opening doors or using windows to ensure full adhesive cure. Note: Professional installation is recommended for a flawless finish. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) for fitting recommendations or local installer referrals. Ready to Protect & Elevate Your LC300 Interior? These door and speaker covers are a subtle but impactful upgrade that your Land Cruiser deserves. Premium materials, precision engineering, and protection that lasts. Shop LC300 Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews Worldwide Shipping via DHL, FedEx, UPS, TNT 30-Day Money-Back Guarantee Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, or Jaguar Land Rover. All product names, logos, and brands are the property of their respective owners. This product is designed for use with the specified vehicle model and is offered as an aftermarket accessory.

Victorious Automotive · Toyota LC250 · Interior Protection Door Sill Protection Cover for Toyota Land Cruiser 250 Prado LC250 2024–2025 Custom-moulded ABS door sill guards with carbon-fibre pattern finish — designed to shield the LC250's original entry panels from daily scuffs, scratches, and wear. LC250 / Prado 2024–2025 ABS Plastic Carbon Fibre Pattern Direct Fit Adhesive Install Interior Protection No Drilling Required Overview The Toyota Land Cruiser 250 — sold internationally as the Prado LC250 — represents one of the most anticipated 4x4 launches in recent years. Its redesigned interior raises the bar for refinement in the segment, making it all the more important that high-contact areas like the door sills are properly protected from day one. The entry point of any door is one of the first places to show wear, and the LC250's wide cabin openings mean the sills take a regular battering from boots, equipment, and everyday loading. These door sill protection covers are precision-engineered to fit the 2024 and 2025 Toyota Land Cruiser 250 Prado exactly. Manufactured from high-grade ABS plastic and finished in a sophisticated carbon-fibre-effect pattern, they sit flush against the original sill panel and act as a sacrificial layer between your vehicle's trim and the outside world — absorbing the scuffs and scratches that would otherwise mark your factory finish permanently. Installation is entirely tool-free. Each cover uses a robust automotive-grade adhesive backing that bonds cleanly to the original sill surface, leaving no damage on removal. The result is a factory-finish appearance that simultaneously upgrades the interior aesthetic and maintains the long-term condition of your LC250's bodywork — exactly the kind of detail that protects resale value over time. What's Included 🛡️ Door Sill Cover Set Full set covering all door entry points 🔧 Adhesive Tape Pre-Applied Automotive-grade backing, no tools needed 📋 Installation Guide Step-by-step fitting instructions included 🧹 Cleaning Prep Wipe Surface prep included for optimal adhesion Product Highlights Precision-moulded for a flush, factory-finish fit on the LC250 Prado High-grade ABS construction — durable, lightweight, and impact-resistant Carbon-fibre pattern finish elevates interior aesthetics Protects original factory sill panels from permanent scratching Tool-free installation via automotive-grade adhesive backing No drilling, cutting, or modification required Removable without damage to original trim surface Resistant to UV fading, moisture, and daily wear Helps preserve interior condition and long-term resale value Compatible with both 2024 and 2025 model year LC250 builds Compatibility Vehicle Model Code Years Fit Toyota Land Cruiser 250 (Prado) LC250 2024, 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 (Prado) LC150 2009–2023 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–25 Minutes  |  🛠 Tools Required: None Begin by thoroughly cleaning each door sill panel using the included prep wipe or isopropyl alcohol. Ensure all dust, wax, and grease residue is removed before proceeding. Allow the surface to dry completely for a minimum of 5 minutes at room temperature. Do not attempt installation in cold or damp conditions. Dry-fit each cover in position first to confirm alignment before removing any adhesive backing. Peel back the adhesive tape and carefully position the cover from one end, pressing firmly along the full length as you lay it down to prevent air bubbles. Apply sustained firm pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure for at least 2–4 hours before the vehicle is used or exposed to moisture. ⚠ Note: For best adhesion results, install at temperatures above 15°C (59°F). Avoid cleaning the sill covers with solvent-based products after fitting, as this may degrade the adhesive bond over time. Protect Your LC250 From Day One The interior of your Land Cruiser 250 deserves to stay in the same condition it left the showroom. These door sill covers are one of the smartest first upgrades you can make — invisible in the right way, and working hard every time a door opens. Shop All LC250 Interior Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Toyota Land Cruiser LC300 · Interior Protection Door Slot Protection Grips for Toyota Land Cruiser LC300 J300 Premium silicone grips that guard your door slots against dirt, scratches, and daily wear while maintaining the refined interior aesthetic of your LC300. LC300 J300 2021–2024 Silicone Interior Anti-Scratch Overview The Toyota Land Cruiser LC300 J300 is the pinnacle of capability and refinement. Its meticulously designed interior deserves protection that matches its quality. These door slot protection grips are engineered specifically for your LC300, fitting the unique contours of the door frame with precision. Door slots collect dust, dirt, and debris over time—especially during off-road use or in challenging environments. Without proper protection, card slots can become scratched or accumulate grime that's difficult to clean. These premium silicone grips form a protective barrier, safeguarding your interior while reducing noise and vibration from door movement. Each grip is custom-tailored to your LC300's geometry, ensuring a seamless installation and uncompromised fit. The silicone material is durable, easy to maintain, and designed to last through the lifespan of your vehicle. What's Included 🛡️ Complete Grip Set All door slots covered 📋 Installation Guide Step-by-step instructions ✨ Cleaning Cloth For surface prep Product Highlights Custom-fit silicone design for LC300 J300 (2021–2024) Superior protection against dirt, dust, and scratches Reduces vibration and door mechanism noise Premium durability rated for daily and off-road use Quick and tool-free installation process Weather-resistant and temperature-stable material Easy cleaning and maintenance Subtle aesthetic that complements interior design Protects card slots and prevents debris accumulation Backed by Victorious 30-day money-back guarantee Compatibility Model Years Fitment Toyota Land Cruiser LC300 J300 2021–2024 Direct Fit Toyota Land Cruiser LC250 2024+ Not Compatible Toyota Land Cruiser 200 Series 2007–2021 Not Compatible Toyota Land Cruiser 100 Series 1998–2007 Not Compatible Installation Difficulty: Easy | Time: 15 minutes Clean the door slot area thoroughly with the included cloth to remove dust and oils. Inspect the silicone grips for any damage before installation. Align the first grip with the door slot opening, ensuring it sits flush with the frame edge. Gently press and slide the grip into place, working from one end to the other. Repeat for all door slots on your LC300. Allow grips to settle for 2–3 hours before using door slots for card storage. Note: Do not force grips into place. If resistance is felt, remove and recheck alignment. Verify compatibility with your specific LC300 year before installation. Guard Your LC300's Interior Premium door slot protection grips keep your Land Cruiser LC300 looking pristine, from daily commutes to remote expeditions. Protect what matters with Victorious engineering. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ Reviews 🚚 Worldwide DHL, FedEx, UPS shipping 💰 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Toyota, Land Cruiser, or any official manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed as an aftermarket accessory and is not an official Toyota product. Installation of aftermarket accessories may void certain vehicle warranties. Please consult your vehicle's warranty documentation before installation.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Trim Door Speaker Covers for Toyota Land Cruiser LC250 2024 — Stainless Steel Black & Silver Precision-formed stainless steel speaker covers that elevate the interior grade of the 2024 Land Cruiser LC250 — protecting original panels while adding a refined, contemporary finish. LC250 2024 Stainless Steel Interior Trim Door Speaker Covers Black & Silver No-Drill Fit Left & Right Set Overview The 2024 Toyota Land Cruiser LC250 represents a significant return to form — a capable, commanding SUV with an interior that deserves equal attention. Whether you're running long highway stretches or technical off-road terrain, the quality of your cabin environment matters. Every detail contributes to the overall experience, and it's often the smaller, well-considered upgrades that make the most lasting impression. These door speaker covers are designed specifically for the LC250's door panel architecture, forming a seamless overlay over the factory speaker grilles. Crafted from high-grade stainless steel, they bring a level of material quality that the stock plastic trim simply cannot match. Available in Black and Silver, they integrate cleanly with both dark and light interior colour schemes — adding visual depth without disrupting the factory design language. The installation requires no drilling or permanent modification. A firm, clean adhesive bond is all that's needed, making this one of the most accessible interior upgrades available for the LC250. The result is a noticeably more premium cabin finish that protects the underlying door panel from daily wear, dust accumulation, and accidental contact. What's Included 🔊 Door Speaker Cover — Left Stainless steel, driver side 🔊 Door Speaker Cover — Right Stainless steel, passenger side 🧲 Pre-Applied Adhesive High-bond backing tape included 📄 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed stainless steel construction for lasting durability Available in Black and Silver to suit all interior colour schemes Direct overlay fit — designed specifically for the LC250 door panel Protects factory speaker grilles from scratches, dust, and wear No-drill, no-cut installation — fully reversible upgrade High-bond adhesive backing pre-applied for clean fitment Elevates perceived interior quality and vehicle grade Maintains full speaker acoustic performance — no sound compromise Corrosion-resistant finish suited to all climates Supplied as a complete left and right set for uniform appearance Compatibility Vehicle Year Trim / Grade Fitment Toyota Land Cruiser LC250 2024 All Grades Direct Fit Toyota Land Cruiser LC300 2021–2024 All Grades Not Compatible Toyota Land Cruiser Prado (J250) 2024 All Grades Not Compatible Toyota Land Cruiser 200 Series 2008–2021 All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the door panel surface around the factory speaker grilles is free from dust, grease, and moisture. A 70% isopropyl alcohol wipe is recommended for best adhesion. Dry-fit each cover against its corresponding speaker grille before committing to adhesion. Confirm alignment with the factory speaker pattern and panel contour. Peel the protective film from the pre-applied adhesive backing on the underside of the cover. Press the cover firmly into position over the factory grille, applying even pressure across the full surface for a minimum of 30 seconds. Allow the adhesive to cure for at least 2 hours before exposing the vehicle to vibration or moisture. Full cure is achieved within 24 hours. Repeat the process for the opposite side, ensuring both covers are symmetrically aligned for a consistent, factory-quality finish. Note: Ensure door panel surfaces are completely clean and at room temperature before installation. Do not apply in cold or humid conditions as this may compromise adhesive bond strength. Professional installation is recommended if you are unsure. Upgrade Your LC250 Interior Today These door speaker covers are a straightforward, high-impact upgrade for any 2024 Land Cruiser LC250 owner who values cabin quality. Worldwide shipping via DHL, FedEx, UPS, and TNT. Backed by our 30-day money-back guarantee. Shop LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. Toyota and Land Cruiser are registered trademarks of Toyota Motor Corporation. All vehicle names and model codes are used solely for fitment reference purposes.

Victorious · Range Rover / Sport · Latches Door Spring Latch Actuator for Range Rover & Range Rover Sport Direct-replacement power door latch actuator with dual-lock function for seamless keyless entry integration. L405 / L494 / L461 2013–2026 Power Latch Keyless Ready Front & Rear OEM Direct Fit Overview Whether you're driving a 2013+ Range Rover Vogue, 2014+ Range Rover Sport, or newer L460/L461 models, your power door latch actuator is working constantly—locking, unlocking, and controlling the secondary spring mechanism that holds the door closed during aggressive off-road driving. When this unit fails, doors may not lock properly, refuse to open, or disable your keyless passive entry system entirely. Our direct-fit replacement actuator restores full locking functionality and re-engages your vehicle's double-lock safety feature designed for Land Rover's demanding standards. Engineered with 8-pin and 6-pin dual-socket connectors, this unit is ready to integrate with your existing wiring harness without modification. Backed by a 1-year manufacturer warranty and precision-matched to OEM part numbers, this actuator delivers the reliability Range Rover owners demand—whether securing your vehicle in urban environments or enabling failsafe locking during off-road adventure. What's Included 🔧 1× Door Latch Actuator Dual-socket connector ready 📋 Installation Guide Step-by-step instructions included ✅ OEM Fitment Tested Direct replacement, no modification 🛡️ 12-Month Warranty Manufacturer coverage included Product Highlights Genuine-spec 8-pin + 6-pin dual-socket connector configuration Compatible with keyless passive entry & smart key systems Double-lock safety mechanism engaged automatically Front, rear, left, & right fitment—single SKU, multiple positions OEM part number cross-reference verified (LR078728, LR078705, LR078748, LR078742 + 12 OEM alternates) Zero-modification installation on L405, L494, L460, L461 models Spring latch mechanism tuned to Land Rover durability standards Sealed connector prevents water ingress & corrosion Factory calibration—no coding or adaptation required Partsmost premium aftermarket brand with 10+ years in UK/EU supply chain Compatibility & Fitment Vehicle Model Code Year Range Position Fit Status Range Rover Vogue L405 2013–2020 Front, Rear, L/R Direct Fit Range Rover Sport L494 2014–2020 Front, Rear, L/R Direct Fit Range Rover Vogue L460 2022–2026 Front, Rear, L/R Direct Fit Range Rover Sport L461 2022–2026 Front, Rear, L/R Direct Fit Range Rover Velar L560 2017–2022 Front, Rear, L/R Not Compatible Discovery Sport L550 2015–2025 All Not Compatible OEM Part Number Verification: Before ordering, confirm your vehicle's current actuator part number matches one of these: LR078729, LR078706, LR078749, LR078743 (front left/right) or LR078728, LR078705, LR078748, LR078742 (rear left/right). Inspect the connector block on the door frame—8-pin and 6-pin dual sockets confirm compatibility. Installation Difficulty Level: Intermediate | Time: 45–60 Minutes Per Door Disconnect the battery negative terminal and wait 30 seconds for the system to power down. Open the door fully and locate the latch actuator assembly on the door frame (rear edge, inside the door cavity). Two bolts and one electrical connector secure it. Disconnect the dual-socket electrical connector by gently pressing the release tab. Note the orientation of the 8-pin and 6-pin connectors. Remove the two mounting bolts (typically 10mm or Torx) and slide the old actuator out of the frame. Position the new actuator in the mounting holes, ensuring the spring latch faces inboard and the connector block aligns with the wiring harness. Install mounting bolts and tighten to 25–30 Nm (18–22 ft-lb). Do not overtighten. Connect the dual-socket electrical connector, ensuring both the 8-pin and 6-pin plugs click fully into place. Reconnect the battery and test door lock/unlock function via the key fob and interior switch. Verify the door closes smoothly and the latch engages fully. Test the secondary lock by pressing the external handle twice without unlocking. ⚠️ Important: Do not force connectors—they are keyed and will only fit one way. If resistance is felt, remove and re-examine orientation. Applying excessive pressure may crack the connector pins and render the part non-returnable. If uncertain, consult a Land Rover-trained technician or contact our team at +44 203 943 9919. Technical Specifications Spec Detail Brand Partsmost (Premium Aftermarket) Condition New Connector Type 8-Pin + 6-Pin Dual Socket Fitment Direct Replacement (No Modifications) Spring Mechanism Double-Lock Power Latch Keyless Integration Passive Entry / Smart Key Ready Origin Manufactured in China; QC in UK Warranty 12 Months Manufacturer Coverage High-Concern Chemicals None Ready to Restore Your Door Locking System? Don't let a faulty latch compromise your Range Rover's security or disable keyless entry. Our direct-fit replacement actuators are engineered to exacting OEM specifications and backed by Victorious's 30-day money-back guarantee. Shop Door Latch Actuators Use code 22GET20 to save 20% when buying any 2 items. 4.9/5 12,300+ verified reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any official Land Rover subsidiary. All product names, logos, and brand references are the property of their respective owners. This product is an aftermarket replacement part designed for fitment compatibility only. Always verify part numbers and vehicle specifications before purchase. Installation on modified or previously damaged door frames may affect fitment. Victorious Automotive assumes no liability for improper installation or damage resulting from user error.

Toyota · LC300 · Interior Protection Door Threshold Guard for Toyota Land Cruiser LC300 Premium ABS protection guards your door sills against scuffs, scratches, and daily wear with whisper-quiet durability. LC300 2021–2024 ABS Engineering Direct Fit Self-Adhesive Overview The Land Cruiser LC300 is a modern masterpiece—a vehicle that demands respect and protection. Every time you slide into your cabin, your door sill bears the brunt: boot scuffs, pant zippers, passenger heels. Over time, these micro-abrasions accumulate into visible wear that diminishes your vehicle's interior refinement. Our Door Threshold Guard is engineered from premium ABS plastic, the same material trusted across OEM automotive interiors. It fits perfectly across the original sill, creating an invisible shield that absorbs impact while preserving the authentic Toyota aesthetic. The 70th anniversary logo adds a collector's touch to your LC300. Installation is completely tool-free: pre-cut, self-adhesive backing means you'll have full protection installed in under 10 minutes. No drilling, no permanent damage to your cabin. Designed for the 2021–2024 LC300, compatible with all trim levels and configurations. What's Included 🛡️ Door Threshold Guards (Set) Pre-fit for all four doors, LC300 2021–2024 📋 Installation Guide Step-by-step photo instructions & adhesive prep tips Product Highlights Premium ABS construction withstands UV, extreme heat, and moisture Anti-scratch profile absorbs and deflects scuffs from footwear and luggage Anti-rub technology prevents rattling and creaking in the door frame Integrated 70th anniversary Toyota logo for exclusive aesthetics Car-specific high-tack double-sided adhesive—no tools required Seamless integration with OEM interior design language Weather-resistant formula maintains integrity in all climates Transparent installation: no visible fasteners or damage Covers all four door sills; full-cabin protection Direct fit for LC300 2021–2024 (all configurations) Compatibility Model Year Range Compatibility Land Cruiser LC300 2021–2024 Direct Fit Land Cruiser LC250 2022–Present Not Compatible Land Cruiser 200 (J200) 2007–2021 Not Compatible Note: Compatible with all LC300 trim levels (GXR, VXR, ZX, GR Sport). Always verify fitment against your specific year and configuration before purchase. Installation Difficulty: Easy | Time: 10 minutes | Tools: None Clean the sills. Wipe all four door sills with a damp cloth and allow to dry completely. Remove any dust, dirt, or residue using rubbing alcohol on a microfibre cloth. Let dry for 5 minutes. Position the guard. Carefully align the first threshold guard along the driver-side door sill. Ensure it sits flush with the natural contour of the sill—top first, then secure the ends. Press and hold. Apply firm, even pressure across the entire guard for 30 seconds. The adhesive sets quickly; do not disturb for 2 minutes after application. Repeat for remaining doors. Follow steps 1–3 for the passenger, rear-left, and rear-right sills. Stagger installation if preferred (one door per hour) to ensure adhesive cure. Final inspection. Check that all edges are flush and secure. The guards should not move when lightly pressed. Avoid opening doors for 24 hours to allow full adhesive set. ⚠️ Important: Do not install on wet, oily, or textured surfaces. If your LC300's sills have a factory protective coating, lightly sand the adhesion area with 120-grit sandpaper and clean thoroughly before application. Guard Your LC300's Interior Today Premium protection doesn't have to be complicated. Install once, protect forever. Our Door Threshold Guards are designed for the discerning Land Cruiser owner who refuses to compromise on detail. Shop LC300 Collection Use code 22GET20 to unlock 20% off when you bundle any two items. ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL & FedEx ✅ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any OEM brand. Product names, trademarks, and imagery are used for identification purposes only. Toyota and Land Cruiser are registered trademarks of their respective owners.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Styling Door Waist Line Chrome Decoration Strip — Toyota Land Cruiser 250 / Prado LC250 (2024+) A precision-fitted chrome waist line strip that elevates the LC250's profile while shielding door flanks from everyday kerb marks and surface scuffs — no drilling, no fuss. LC250 Prado 2024+ Chrome Finish ABS Material No-Drill Fit Silver & Black Paint Protection Exterior Trim Overview The 2024 Toyota Land Cruiser 250 — and its Prado LC250 sibling — arrived as a bold reinterpretation of one of the world's most respected four-wheel drives. Its angular body lines and prominent door panels are a defining part of that character, and this chrome waist line decoration strip is designed to complement that aesthetic precisely, tracing the factory body crease with a refined metallic accent that feels factory-correct rather than aftermarket. Crafted from high-grade ABS material with a chrome or blacked-out finish, the strip runs along the door waist line to add visual depth and a premium two-tone contrast against the LC250's bodywork. Beyond the styling benefit, the strip acts as a practical barrier against the inevitable door dings, carpark scrapes and surface marks that accumulate on wide-bodied SUVs — protecting the paint underneath without any permanent modification to the body. Installation is entirely adhesive-based. The strip arrives pre-cut for the LC250's door profile, with a purpose-formulated 3M-style backing tape that bonds firmly to clean bodywork and holds through temperature cycling and washing. Whether you're refining a daily driver or completing a detailed exterior build, this is an understated upgrade that LC250 owners consistently rate as one of the most satisfying low-effort improvements available. What's Included ✦ Chrome Decoration Strip Set Full door waist line set, pre-cut for LC250 fitment 🔧 Pre-Applied Adhesive Tape High-bond 3M-style backing for permanent, clean fitment 🧹 Surface Prep Wipe IPA cleaning wipe for adhesion preparation 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-cut profile matched to the 2024 Toyota Land Cruiser 250 door line Available in Silver Chrome and Matte Black to suit different build styles High-grade ABS construction — resistant to UV fade, warping and cracking No drilling, no cutting — fully adhesive installation preserves bodywork integrity Acts as a physical barrier against door dings, kerb marks and surface scuffs Protects underlying factory paint from chips and micro-abrasion damage Chrome finish mirrors factory trim detailing for a seamless, OEM-style look Holds firm through car washes, temperature extremes and UV exposure Reversible upgrade — removal leaves no permanent marks when done correctly Compatible with both standard and Prado LC250 body variants (2024 onwards) Compatibility Vehicle Year Range Variant Fitment Toyota Land Cruiser 250 2024+ All Grades Direct Fit Toyota Land Cruiser Prado LC250 2024+ All Grades Direct Fit Toyota Land Cruiser 300 (LC300) 2021+ All Grades Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Grades Not Compatible Toyota Land Cruiser Prado 150 2009–2023 All Grades Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔩 Tools Required: None Wash and thoroughly dry the door panels. Pay particular attention to the waist line crease where the strip will sit — any wax residue or moisture will compromise adhesion. Use the included IPA prep wipe (or isopropyl alcohol) to clean the full length of the application area. Allow to dry completely — 2 to 3 minutes at room temperature. Dry-fit the strip against the door to confirm alignment before committing. The strip should follow the factory body crease naturally without forcing. Starting from one end, peel back approximately 10cm of the adhesive backing and press the strip firmly into position, working along the panel progressively — avoid pulling the strip taught, which can introduce flex stress. Once fully applied, run a soft cloth firmly along the entire strip to activate the adhesive bond evenly. Apply firm, consistent pressure for 30 seconds per section. Allow the adhesive to cure for a minimum of 24 hours before washing or exposing the vehicle to rain. Avoid using pressure washers directly over the strip edges for the first 72 hours. ⚠ Important: Install in ambient temperatures above 15°C (59°F) for optimal adhesive performance. Cold weather significantly reduces initial bond strength. If fitting in winter, warm the panel gently with a heat gun on a low setting before application. Always confirm panel fitment before removing the full adhesive backing. Explore More LC250 Exterior Upgrades Complement your new waist line strips with the full range of Toyota Land Cruiser LC250 exterior accessories available at Victorious — trusted by 12,300+ verified customers worldwide. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used solely for the purpose of indicating product compatibility. Please verify fitment against your specific vehicle configuration prior to purchase.

Victorious · Range Rover · Engine Parts Drive Belt, Idler Pulley & Tensioner Kit – 5.0L V8 Range Rover / Sport Factory-specification serpentine belt system for flawless V8 performance. Direct OE replacement for 2013+ Range Rover and 2014+ Range Rover Sport. L405 / L494 2013–2020 5.0L Supercharged Engine Critical OE Spec Complete Kit Overview The serpentine belt system on your 5.0L V8 Range Rover or Range Rover Sport is the circulatory backbone of your engine. It drives the alternator, power steering pump, and water pump—critical systems that demand precision engineering and flawless reliability. This complete belt kit combines genuine OE-specification components: a reinforced primary drive belt (LR035542), precision-engineered idler pulleys (LR035544/LR086058), and a factory-matched belt tensioner (LR035546). Every piece is engineered to exact Land Rover tolerances, ensuring perfect tension, zero slip, and maximum component lifespan. Whether you're replacing a worn belt proactively or addressing a failure, this kit delivers the robustness and longevity your V8 deserves. No compromise on accessory-driven performance. What's Included 🔗 Primary Drive Belt LR035542 – 6PK2447 profile, reinforced ribbing ⚙️ Idler Pulley LR035544 / LR086058 / LR106769 – sealed bearing 🔧 Belt Tensioner LR035546 / LR010756 – automatic spring mechanism 📋 Installation Guide Step-by-step instructions with torque specs Key Highlights OE-equivalent tension and slip profile – zero accessory drag Reinforced polymer composite – resists heat and UV degradation Sealed bearing idler – extends service life to 100,000+ miles Automatic spring tensioner – self-regulates throughout belt life Tested on 5.0L SGDI SC (supercharged) engines – proven reliability Drop-in fitment – no modifications or alignment required Lower risk of serpentine failure – complete system replacement Factory torque specifications included – professional installation standard Works on Discovery LR4, Ranger Rover L405, Range Rover Sport L494 Peace of mind – 1-year manufacturer warranty Vehicle Compatibility Vehicle Engine Year Range Status Range Rover Vogue L405 5.0L SGDI SC V8 2013–2020 Direct Fit Range Rover Sport L494 5.0L SGDI SC V8 2014–2020 Direct Fit Range Rover Sport L494 3.0L V6 Petrol 2014–2020 Direct Fit Discovery LR4 5.0L V8 Petrol 2010–2013 Direct Fit Range Rover Vogue L405 3.0L V6 Petrol 2013–2020 Direct Fit Not sure if this fits? Check your vehicle's part number against LR035542, LR035544, LR086058, or LR035546 in your service records. Or message our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) with your VIN and we'll confirm fitment in minutes. Installation Difficulty Level: Intermediate | Time: 45–90 minutes Disconnect the negative battery terminal to disable the alternator and prevent accidental rotation. Remove the plastic engine cover (if fitted) and locate the tensioner on the left side of the engine bay. Rotate the tensioner counterclockwise using a 15mm socket to relieve tension on the old belt. Carefully slide the worn belt off all pulleys: idler, alternator, power steering pump, water pump, and crankshaft. Inspect all pulleys for cracks, misalignment, or bearing damage. Replace if necessary. Install the new idler pulley (LR035544) using a 13mm socket. Torque to 45 Nm. Install the new tensioner (LR035546) on the bracket. Torque the pivot bolt to 32 Nm and the locking bolt to 16 Nm. Route the new belt exactly as shown on the under-hood diagram (usually affixed inside the bonnet). Start at the crankshaft pulley, working outward. Rotate the tensioner counterclockwise again to create slack for final routing. Verify the belt sits fully in every pulley groove – no twists, no cross-routing. Release the tensioner slowly and allow it to auto-tension the new belt. Rotate the engine by hand 2–3 complete revolutions to ensure the belt tracks straight and tensioner action is smooth. Reconnect the battery terminal and start the engine. Listen for any squealing or rubbing for the first 10 seconds. Let the engine idle for 5 minutes while observing the belt for slip or vibration. ⚠ Important: Over-torquing the tensioner bolt can damage the spring mechanism. Use a calibrated torque wrench set to the exact specification: pivot 32 Nm, lock 16 Nm. Do not attempt this on an engine that is hot—wait at least 30 minutes after shutdown. Why This Matters A worn or slipping serpentine belt doesn't just affect one system—it cascades across your entire engine bay. A failing belt forces the alternator to undercharge (dimming headlights, weak electronics), the power steering pump to lose pressure (heavy steering feel), and the water pump to slow (rising coolant temperature). You're one roadside breakdown away from a tow bill. This complete kit eliminates that risk in one go. You're not patching a symptom; you're replacing the entire system to factory spec. Peace of mind worth far more than the cost. Ready to Secure Your V8's Heart? Order your complete serpentine belt kit today. We ship worldwide via DHL, FedEx, and UPS. Your 30-day money-back guarantee means zero risk. Shop Drive Belt Kit Now Use code 22GET20 for 20% off when you buy any 2 items 4.9/5 – 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS shipping 1-year manufacturer warranty Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Limited. All part numbers and OE references are used for compatibility identification only. Consult your vehicle's service manual or a qualified technician before installation. Improper installation may void your vehicle's warranty.

Victorious Automotive · Toyota LC250 · Interior Trim Driver's Side Interior Panel Trim Cover — Toyota Land Cruiser 250 (LC250) 2024 A precision-moulded ABS trim panel that elevates the driver's door interior on the 2024 Toyota Land Cruiser 250, delivering a refined finish that protects the factory surface and enhances cabin aesthetics in a single install. LC250 / Prado 250 2024 ABS Material LHD Only Silver Finish Fiber Pattern Finish Paste-On Fit Driver's Side Overview The 2024 Toyota Land Cruiser 250 — also sold in select markets as the Prado LC250 — represents a significant step forward in the Land Cruiser lineage, blending modern SUV refinement with proven off-road capability. Its interior carries a noticeably upscale feel, and enthusiast owners are understandably protective of every surface inside the cabin. This driver's side interior panel trim cover is engineered specifically for the LC250's door architecture, sitting flush against the factory panel with no gaps, flex, or misalignment. Crafted from high-grade ABS plastic, it arrives in your choice of Silver or Fiber Pattern finishes — each designed to complement the factory trim palette without clashing or looking aftermarket in the wrong way. Installation requires no drilling, no permanent modification, and no specialist tools. The paste-on adhesive method means the cover bonds cleanly to the original surface, protecting it from daily contact marks, scuffs, and UV fading while adding a layer of visual interest that most owners notice immediately. It's a small change that makes a genuine difference. What's Included 🚪 Driver's Side Panel Trim Cover 1 piece · ABS construction · LHD fitment 🔩 Adhesive Fixing Tape Pre-applied or included for paste-on installation 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for an exact fit on the 2024 LC250 driver's door panel High-grade ABS construction — impact resistant and long lasting Available in Silver or Fiber Pattern to suit your interior style Protects the factory surface from scuffs, scratches, and UV degradation Paste-on adhesive installation — no drilling or permanent modification Flush, seamless finish that looks factory-integrated once fitted Designed exclusively for Left-Hand Drive (LHD) LC250 models Lightweight construction adds no meaningful weight to the door Easy to clean and maintain alongside regular interior care routines Immediately elevates the perceived quality of the driver's door interior Compatibility Vehicle Year Drive Side Fit Toyota Land Cruiser 250 (LC250) 2024 Left-Hand Drive (LHD) Direct Fit Toyota Prado 250 2024 Left-Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 (LC250) 2024 Right-Hand Drive (RHD) Not Compatible Toyota Land Cruiser 200 Series All Years LHD / RHD Not Compatible Toyota Land Cruiser 300 Series All Years LHD / RHD Not Compatible Installation Notes ⚙️ Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Begin with a clean, dry driver's door panel. Use an interior panel cleaner or isopropyl alcohol wipe to thoroughly degrease the surface where the trim cover will bond. Hold the trim cover against the door panel without removing the adhesive backing to confirm fitment, alignment, and positioning before committing. Once satisfied with placement, carefully peel back the adhesive tape backing — partially at first — and begin aligning from one edge, pressing firmly as you go. Apply firm, even pressure across the entire surface of the trim cover for 30–60 seconds to ensure full adhesive contact. Allow the adhesive to cure at room temperature for a minimum of 24 hours before exposing the door to heavy use, moisture, or extremes of temperature. ⚠ Important: This trim cover is designed exclusively for Left-Hand Drive (LHD) Toyota Land Cruiser 250 models. It will not correctly fit Right-Hand Drive vehicles. Please confirm your vehicle's drive configuration before ordering. Do not attempt to install in cold conditions below 10°C as adhesive performance may be reduced. Upgrade Your LC250 Interior Today Small details define a truly well-kept cabin. This driver's side panel trim cover is one of the simplest, most impactful upgrades you can make to your 2024 Land Cruiser 250's interior — and it takes less than half an hour to fit. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🚚 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle before purchasing.

Victorious Automotive · Land Rover Discovery 5 · Interior Protection Durable Black PVC Trunk Mat for Land Rover Discovery 5 (2017–2024) — Dustproof Floor Protection A precision-fitted trunk mat engineered from heavy-duty PVC to keep your Discovery 5's load area protected from dust, dirt, moisture, and daily wear — year after year. Discovery 5 L462 2017–2024 Premium PVC Dustproof Waterproof Black Direct Fit Interior Protection Overview The Land Rover Discovery 5 is built to handle everything from school runs to off-road expeditions — and its boot takes the brunt of it all. Whether you're loading muddy walking boots, wet gear after a trail, or heavy cargo week in and week out, the factory load area floor is constantly at risk of staining, scratching, and permanent soiling. Protecting it from day one is simply the smartest decision a Discovery 5 owner can make. This trunk mat has been developed with a single purpose: to provide a seamless, durable barrier between your Discovery 5's boot floor and whatever life throws at it. Crafted from high-quality PVC, it delivers a firm yet flexible surface that resists moisture, dust, and grime without cracking, curling, or fading over time. The deep black finish integrates cleanly with the Discovery 5's refined interior aesthetic — purposeful without being obtrusive. Unlike generic mats that shift under load or leave gaps at the edges, this mat is shaped specifically for the Discovery 5 boot floor profile, ensuring full coverage and a secure, stable fit. No tools, no adhesives, no guesswork — it simply drops into place and gets to work immediately. What's Included 🧩 Trunk Mat × 1 Pre-formed black PVC mat, shaped for Discovery 5 boot floor 📋 Fitting Guide Basic reference for correct orientation and placement Product Highlights Tailored fitment for the Land Rover Discovery 5 (L462) boot floor profile Heavy-duty PVC construction resists cracking, warping, and surface degradation Dustproof surface prevents fine particles from settling into boot carpet fibres Waterproof barrier protects against wet boots, spills, and damp cargo Deep black finish complements the Discovery 5's interior colour palette Non-slip underside keeps the mat firmly in position during transit Easy to remove, rinse, and refit — maintenance takes seconds Lightweight yet robust — adds protection without adding bulk No drilling, adhesives, or modification required for installation 100% brand new — supplied in pristine, ready-to-fit condition Compatibility Vehicle Generation / Code Year Range Fit Land Rover Discovery 5 L462 2017 – 2024 Direct Fit Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 2004 – 2009 Not Compatible Land Rover Discovery Sport L550 2015 – 2024 Not Compatible Range Rover Sport L494 / L461 2013 – 2024 Not Compatible Range Rover Vogue L405 / L460 2013 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 2–5 Minutes  ·  Tools Required: None Open your Discovery 5's tailgate and clear the boot floor of any existing mats, liners, or loose items. Remove the new PVC trunk mat from its packaging and allow it to lay flat for a few minutes if it has been rolled or folded during transit. Orient the mat correctly — align the shaped edges with the contours of your Discovery 5's boot floor. The mat should sit flush on all sides without forcing or bending. Press the mat flat across the full boot floor area, ensuring the non-slip underside makes full contact with the factory floor surface. Confirm there are no lifted edges or gaps, then load your cargo as normal. The mat is immediately ready for use. Note: This mat is designed for the boot floor area only. It is not intended to cover the side liners or the underfloor storage compartment. If your Discovery 5 has a factory rubber boot liner already fitted, remove it before installing this mat for the most secure fit. Complete Your Discovery 5 Interior Explore our full range of Land Rover Discovery 5 accessories — from interior protection to exterior styling — and keep your vehicle looking its best for years to come. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L320 · Fog Lamp Covers Primed Front Fog Lamp Hood Covers – Range Rover Sport L320 (2005–2009) | Left & Right Pair OE-matched primed PP fog light bezels for the first-generation Range Rover Sport — precision-moulded to restore factory fitment and front-end protection on your L320. Range Rover Sport L320 2005–2009 Part No. DXB000221LML Part No. DXB000231LML Primed PP Plastic Direct Fit Left & Right New Condition RALUX Overview The first-generation Range Rover Sport (L320, 2005–2009) established itself as one of the most dynamic and desirable SUVs of its era — a vehicle that rewarded owners who took pride in keeping every detail exactly right. The front fog lamp bezels sit prominently in the lower bumper and are among the first components to show the wear of road use, stone chips, or minor parking incidents. A cracked, discoloured, or missing fog lamp hood immediately undermines the Sport's composed, purposeful stance. These replacement fog lamp hood covers — part numbers DXB000221LML (right) and DXB000231LML (left) — are precision-moulded from high-density polypropylene (PP) to replicate the exact geometry of the original OE units. Supplied in a paint-ready primed finish, they accept standard automotive body paint directly, allowing you to blend them seamlessly with your existing bumper colour for a factory-quality result. Offered as a left and right set, this listing ensures your Sport gets a symmetrical, matched restoration in a single order. Whether you're addressing accident damage, UV degradation, or simply refreshing an ageing front end, these bezels deliver the kind of precise fit and finish that a vehicle of this calibre demands — without the dealership price tag. What's Included 🔦 Right Fog Lamp Hood Part No. DXB000221LML — driver-side bezel, primed finish 🔦 Left Fog Lamp Hood Part No. DXB000231LML — passenger-side bezel, primed finish 📋 Fitment Reference Vehicle application guide included with shipment Product Highlights Precision-moulded PP construction mirrors OE part geometry exactly Paint-ready primed surface — compatible with all standard automotive body paints Complete left and right pair for a fully matched front-end restoration New condition — not refurbished or reconditioned Designed specifically for Range Rover Sport L320 lower bumper apertures Lightweight at 0.5 kg — no impact on vehicle dynamics or front-end balance Fog light protection function retained — correctly houses and shields fog lamp assembly Direct OE replacement — no cutting, drilling, or modification required Dimensions: approx. 13" (L) × 12" (W) × 12" (H) — matches original bumper recess profile Supplied by RALUX, a trusted supplier of Land Rover body restoration components Compatibility Vehicle Code Year Range Fitment Range Rover Sport L320 2005–2009 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: ⭐⭐☆☆☆  |  Estimated Time: 30–60 minutes  |  Professional paint recommended Before fitting, prepare the primed surface by lightly sanding with 400-grit wet-and-dry paper to ensure a smooth, even base for paint adhesion. Apply a compatible automotive primer sealer coat if required by your chosen topcoat system, then paint to match your bumper colour. Allow full cure time per paint manufacturer's instructions before handling. With the vehicle on a flat surface, carefully remove the front bumper lower trim or access panel to reach the existing fog lamp bezel mounting points (refer to your workshop manual for L320-specific fastener locations). Unclip or unscrew the damaged fog lamp hood from the bumper aperture, disconnecting any retaining tabs carefully to avoid cracking the surrounding bumper material. Align the new fog lamp hood into the bumper aperture, ensuring all locating tabs and clip positions are correctly seated before applying pressure to secure. Refit any removed trim panels and fasteners. Verify the fog lamp lens is correctly seated and fully protected within the new bezel before completing reassembly. ⚠ Note: These covers are supplied primed and unpainted. Professional painting prior to fitting is strongly recommended to achieve a factory-quality finish. Ensure paint is fully cured before installation to prevent damage to the new surface during handling. Restore Your Sport's Front End — The Right Way At Victorious Automotive, we stock the parts that Range Rover owners actually need — precisely specced, properly described, and dispatched worldwide. Your L320 deserves better than a poorly fitting aftermarket part. Shop Range Rover Sport Parts Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Part numbers are cited for reference only.

Victorious Automotive · Defender L663 · Exterior Lighting Dynamic LED Rear Bumper Tailgate Cover with Brake Light — Land Rover Defender L663 (2020–2023) A precision-engineered tailgate cover that brings sequential LED turn signals and a high-output brake light to the Defender L663 — sharper visibility, sharper looks, zero compromise. Defender L663 2020–2023 Dynamic Turn Signal LED Brake Light Rear Bumper Cover Direct Fit Plug & Play Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle that commands attention — on tarmac, on track, and deep off-road. Its rear profile is bold and purposeful, but the factory tailgate lighting setup leaves room for a meaningful upgrade. For Defender owners who want every detail to reflect the vehicle's character, this Dynamic LED Rear Bumper Tailgate Cover is exactly that: purposeful, considered, and visually striking. Designed exclusively for the Defender 110 and 90 L663 (2020–2023), this tailgate cover replaces or overlays the lower rear bumper section and integrates a high-intensity LED brake light alongside a fluid, sequential dynamic turn signal. Rather than a static amber flash, the directional indicator sweeps outward — a visual signature that's both modern and unmistakably intentional. The result is a rear end that communicates more clearly with drivers behind, particularly in low-visibility or fast-moving traffic conditions. Built to slot into the Defender's existing architecture without cutting, drilling, or rewiring, this is an upgrade that respects the integrity of your vehicle. Wiring connects directly to your factory loom via matching connectors, and the fitment is precise enough that the final result looks entirely factory-fitted — because in its proportions and finish, it was designed to be exactly that. What's Included 🔲 LED Tailgate Bumper Cover Full rear bumper cover with integrated LED array — brake and dynamic turn signal 🔌 Wiring Harness Pre-terminated plug-and-play loom for direct factory connector integration 🔩 Mounting Hardware All fasteners and brackets required for secure fitment 📋 Installation Manual Step-by-step illustrated guide for a clean, confident fit Product Highlights Dynamic sequential LED turn signal sweeps outward for clear, modern directional indication High-output LED brake light delivers noticeably stronger stopping cues versus factory bulbs Precision-tooled to match Defender L663 rear bumper geometry — no gaps, no flex Plug-and-play wiring harness connects directly to factory connectors — no splicing required Improved rear visibility in low-light, dusk, and adverse weather conditions Finish and surface texture matched to factory Defender exterior trim standards No permanent modification to the vehicle structure or OEM wiring loom LED light source offers exceptional longevity compared to conventional bulbs Works seamlessly with both Defender 90 and Defender 110 L663 body styles Designed and validated specifically for 2020–2023 model year variants Compatibility Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2023 Direct Fit Land Rover Defender 90 L663 2020–2023 Direct Fit Land Rover Defender 130 L663 2022–2023 Verify Before Purchase Land Rover Defender (Pre-2020) L316 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Not Compatible Range Rover Vogue L460 / L405 All Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tools, T20/T25 Torx set, multimeter (optional) Open the tailgate fully and ensure the vehicle is on level ground with the ignition off and battery isolated for safety. Using appropriate trim tools, carefully remove the lower rear bumper cover by releasing the factory clips and Torx fasteners along the underside and inner edges. Disconnect the existing rear light connectors from the factory loom — note their positions for reference during reinstallation. Position the new LED tailgate cover against the mounting points, aligning it carefully before seating any clips or fasteners to ensure correct geometry. Connect the supplied wiring harness to the factory connectors — each plug is keyed and colour-coded to prevent incorrect fitment. Secure all fasteners and clips firmly, confirm the panel sits flush across its full perimeter, then reconnect the battery and test both brake and indicator functions before closing the tailgate. ⚠ Note: Professional installation is recommended if you are not confident working with automotive trim or electrical systems. Confirm your exact model year and Defender body style (90 or 110) before beginning installation. Incorrect fitment attempts may damage factory clips or connectors. Built for Defenders. Trusted by Enthusiasts. Every upgrade we carry at Victorious is selected because it genuinely improves the vehicle — not just on paper, but on the road. The Defender deserves better than afterthoughts. This is the rear lighting upgrade it was always missing. Shop All Defender L663 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Defender L663 · Exterior Lighting Dynamic LED Turn Signal Side Mirror Lights for Land Rover Defender 90 & 110 (2020–2024) A flowing sequential LED turn signal effect, precision-engineered for the Defender L663 — elevating both visibility and exterior presence in one seamless upgrade. Defender L663 2020–2024 Sequential LED Direct Fit Weather-Resistant Plug & Play Defender 90 Defender 110 Exterior Lighting Overview The Land Rover Defender L663 is a vehicle that demands accessories worthy of its character — purposeful, capable, and built to an uncompromising standard. Whether you're running the Defender 90 in a city environment or putting the 110 through its paces in demanding terrain, every exterior detail tells a story about how seriously you take the machine. These Dynamic LED Turn Signal Side Mirror Lights are designed exclusively for the 2020–2024 Defender generation. Rather than a simple static indicator, the sequential LED sweep creates a progressive, flowing light effect — similar to what you'd find on far more expensive modern performance vehicles. The result is a turn signal that's not only more visible to other road users, but genuinely distinctive and refined in its appearance. Constructed from high-grade weather-resistant materials, these units are built to endure the same conditions your Defender does. The fitment is direct — no cutting, no modification, no specialist tools. They integrate cleanly into the existing mirror housing and work seamlessly with the factory wiring, making this one of the most rewarding visual upgrades available for the current-generation Defender. What's Included 💡 Dynamic LED Turn Signal Lamp (Left) Sequential flowing indicator, driver side 💡 Dynamic LED Turn Signal Lamp (Right) Sequential flowing indicator, passenger side 🔌 Wiring Connectors Plug-and-play connection to factory harness 📄 Installation Guide Step-by-step reference for a clean install Product Highlights Sequential dynamic LED sweep for a premium, flowing turn signal effect Designed specifically for Land Rover Defender 90 & 110 L663 (2020–2024) Direct OEM-style fitment — no cutting or modification required Plug-and-play wiring that integrates with the factory electrical system Weather-resistant construction rated for all climates and terrain conditions Significantly improved lateral visibility for other road users Minimal power draw with long-life LED technology Consistent light output — no flickering or fading over time Subtle, purposeful aesthetic that complements the Defender's design language Sold as a complete pair — both mirrors covered in one purchase Compatibility Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2024 Direct Fit Land Rover Defender 110 L663 2020–2024 Direct Fit Land Rover Defender 130 L663 2022–2024 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–40 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and ignition removed before beginning any work around the mirror housing. Carefully remove the existing mirror indicator lens by releasing the retaining clips on the side mirror housing — no tools or drilling required. Disconnect the factory indicator connector from the original unit and set aside the old lamp. Connect the new Dynamic LED Turn Signal Lamp to the factory wiring harness using the supplied plug-and-play connector. The connector is keyed to prevent incorrect fitment. Seat the new LED unit into the mirror housing, pressing firmly until the clips engage and the unit is flush. Repeat the process for the opposite mirror. Restore the ignition and test both indicators — left and right — to confirm the sequential sweep is functioning correctly. Note: If your Defender is covered by an active manufacturer or dealer warranty, we recommend consulting your authorised Land Rover retailer before installing aftermarket lighting components. Always ensure the indicator function is verified before returning the vehicle to road use. Built for Defenders. Trusted by Owners. Join over 12,300 Land Rover and Defender owners who've upgraded their vehicles with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes referenced on this page are used solely for the purpose of fitment identification. All trademarks remain the property of their respective owners.

Jetour · Traveler T2 · Interior Controls Dynamic Physical Buttons for Jetour Traveler T2 2023–2025 Premium central control button upgrade delivering tactile response and modern interface refinement for your Traveler T2 interior. Jetour Traveler T2 2023–2025 Interior Retrofit Direct Fit Physical Controls Overview The Jetour Traveler T2 is engineered for serious adventure seekers who demand both capability and comfort. The cabin's control layout sets the tone for every drive—and your fingertips deserve a response that matches the precision of your vehicle. These dynamic physical buttons transform your Traveler T2's central console with responsive, tactile controls designed to replace or upgrade OEM functionality. Unlike soft-touch or aging touchscreen-only systems, physical buttons deliver instant haptic feedback, reducing driver distraction and increasing reliability during off-road use where durability matters most. Whether you're refreshing worn controls or modernising an existing system, this retrofit kit integrates seamlessly into Traveler T2 (2023–2025) architecture. Direct fit engineering means zero modification to surrounding trim—just clean installation and immediate daily confidence. What's Included ⚙️ Dynamic Button Module Pre-programmed control interface 🔧 Installation Hardware Mounting brackets and fasteners 📖 Instruction Manual Step-by-step fitment guide 🛡️ Warranty Certificate 30-day money-back guarantee Product Highlights Tactile feedback response eliminates fumbling with touchscreens Direct fit design—no cutting, drilling, or permanent modification Premium material construction rated for extreme temperature swings Compatible with all 2023–2025 Jetour Traveler T2 trim levels Seamless integration with OEM infotainment and climate systems Reduced driver distraction during dynamic driving conditions Easy removal—retrofit design allows reversal without damage Tested for durability in high-vibration off-road environments Intuitive layout mirrors factory logic for zero learning curve Backed by independent quality audit and customer testing Compatibility Overview Year / Trim Traveler T2 Status 2023–2024 All Trims Direct Fit 2025 All Trims Direct Fit 2022 and Earlier Not Compatible Not Compatible Unsure about your exact model year or interior spec? Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll verify fitment before you order. Installation Notes Difficulty: Beginner to Intermediate Estimated time: 30–45 minutes Disconnect the vehicle's battery negative terminal Remove lower steering column panel by unclipping retainers Gently lever out existing button module using provided tool Unplug OEM connector from rear of module Plug new dynamic button module into OEM connector (keyed fit—one orientation only) Align mounting holes and secure with provided hardware Press panel trim back into position until all clips engage Reconnect battery and test all button functions ⚠️ Important: Do not force the connector. A properly keyed connection will slide smoothly. If resistance is felt, stop and recheck orientation. Forcing can damage wiring. When in doubt, contact support before proceeding. Ready to Upgrade Your Traveler T2 Interior? Restore tactile precision to your central controls. Experience the difference responsive, reliable buttons bring to every journey—on tarmac and trail alike. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 — 12,300+ verified reviews 🚚 Worldwide shipping — DHL, FedEx, UPS, TNT ✅ 30-day guarantee — Money-back promise 📞 Expert support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or official partners of Jetour Automobile Co., Ltd., or any OEM supplier. All product names and vehicle designations are trademarks of their respective owners. This product is designed for fitment and compatibility only and does not claim OEM engineering or factory approval. Installation at owner's risk. Always verify fitment before purchase.

Victorious · Toyota Land Cruiser LC300 · Exterior Dynamic Tail Wing LED Spoiler for Toyota Land Cruiser LC300 Premium LED tail wing with dynamic streamer signals and integrated daytime running lights—elevates your LC300's presence and safety in one installation. LC300 2021–2024 LED Dynamic ABS Material Direct Fit Wired Indicator Overview The Toyota Land Cruiser LC300 (2021–2024) is a serious off-road machine that demands equally serious styling. This Dynamic Tail Wing LED Spoiler transforms your rear end with cutting-edge LED technology—daytime running lamps, dynamic turn signal animation, and brake indicators—while maintaining the rugged aesthetics your Land Cruiser deserves. Built from high-impact ABS plastic, this spoiler doesn't just look the part. It integrates directly into your LC300's electrical system with colour-coded connectors for the daytime running lamp (ACC line), left/right turn signals, and brake lamp. The dynamic LED streamer gives your vehicle that modern, premium presence on the road and trail alike. Two styling options—A Style and B Style—let you choose the visual direction that fits your LC300's character. Whether you run factory trim or have already upgraded, this spoiler slots in seamlessly and raises the overall grade of your vehicle's exterior in ways that simple plastic trim simply cannot. What's Included 🔧 1 × Dynamic Tail Wing Spoiler ABS construction, pre-drilled for LC300 fitment 💡 Integrated LED Module Daytime running lamp, turn signal, brake lamp 🔌 Colour-Coded Wiring Harness Black, red, white, yellow, blue connectors included 📋 Installation Guide Step-by-step wiring instructions with diagrams Product Highlights LED dynamic streamer design with animated turn signals Integrated daytime running lamp (connects to ACC line) Dual-function turn indicators with full-brightness colour coding Brake lamp activation for enhanced visibility High-impact ABS material resists impacts and UV fade Direct fit for LC300 models 2021–2024 (no modification needed) Two style options: A Style and B Style variants Complete colour-coded wiring harness included Professional appearance matches OEM-level integration Improves vehicle safety profile with modern LED tech Compatibility Model Years Style A Style B Toyota Land Cruiser LC300 2021–2024 Direct Fit Direct Fit Toyota Land Cruiser LC250 2024+ Not Compatible Not Compatible Other Toyota Models Any Not Compatible Not Compatible Installation Difficulty Level: Intermediate | Time: 45–60 minutes Locate rear spoiler mounting points on your LC300—typically at the boot edge and sides. Ensure surface is clean and dry. Position the spoiler against the rear panel using the pre-drilled mounting holes as a guide. Check alignment before securing. Secure with supplied fasteners or OEM-compatible bolts. Do not over-tighten; finger-tight plus ¼ turn is sufficient. Route the wiring harness through the interior of the boot. Avoid pinching wires against sharp edges or moving parts. Connect the wiring harness to your LC300's electrical system: Black line → Negative pole / chassis ground Red line → ACC line (daytime running lamp) White wire → Left turn signal Yellow line → Right turn signal Blue line → Stop lamp (brake) Test all LED functions—daytime running light, both turn signals, and brake lamp—before final installation. Secure wiring with cable ties to prevent movement, then tuck excess length into the boot cavity. ⚠️ Important: If you are not confident with electrical wiring, consult a professional automotive technician. Incorrect connections may cause electrical faults or damage to your LC300's wiring harness. Upgrade Your LC300 Today Transform your Land Cruiser's rear end with modern LED engineering and premium styling. This spoiler raises the visual and functional bar—and it's backed by our 30-day money-back guarantee and world-class customer support. Shop LC300 Accessories Use code 22GET20 to save 20% on any 2 items. ⭐ 4.9/5 stars from 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT shipping 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover, or any manufacturer trademark mentioned. All product names and logos are the property of their respective owners. This description is for informational purposes only and does not constitute an official product specification from any manufacturer.

```html Victorious · Mercedes GLS/GL X167 · Running Boards Electric Motor Automatic Running Boards for Mercedes-Benz GLS/GL X167 Premium motorised side steps with full-integration into your OEM door triggers—automatic deployment on unlock, seamless retraction on lock. X167 2020+ Aluminium Alloy Automatic Deploy 800kg Capacity No Drilling Overview The Mercedes-Benz GLS and GL-Class (X167) are commanding three-row luxury SUVs designed for families and explorers who demand comfort at every step. High ground clearance and a commanding driving position, however, can make cabin entry a challenge—particularly for shorter passengers or those with mobility considerations. These Electric Motor Automatic Running Boards transform entry and exit into a seamless, luxurious experience. Precision-engineered from marine-grade aluminium alloy and stainless steel, they activate automatically when you unlock your doors and retract silently when you lock up. The 800kg weight capacity means confident footing for all occupants, while the integrated side step bar design complements the GLS/GL's bold body lines. Installation utilises your vehicle's existing chassis mounting points—no drilling, no permanent modifications. Whether you're speccing a new GLS or upgrading a current model, these boards deliver the quality and reliability that Mercedes owners expect. What's Included 📦 Motorised Running Board Set L/R pair with integrated electric actuators 🔩 Stainless Steel Mounting Hardware Corrosion-resistant brackets and fasteners ⚡ Wiring Harness & Connectors Pre-assembled door trigger integration 📋 Installation Guide Step-by-step instructions with torque specs Product Highlights Aluminium alloy construction with ABS and stainless steel accents Automatic motor deployment on door unlock, retraction on lock 800kg static load capacity for all passenger weights ISO9001, TS16949, and CCC certified engineering Scratch-resistant powder coating and wear-tested surface Integrated side step bar—factory aesthetic integration Weight: 38–40kg per pair, balanced installation No drilling required; uses OEM chassis anchor points Sealed motor assembly—water and salt spray resistant Failsafe manual descent in case of power loss Compatibility Model Year Range Code Fitment Mercedes-Benz GLS 2020–2026 X167 Direct Fit Mercedes-Benz GL-Class 2020+ X167 Direct Fit Mercedes-Benz GLE 2020–2026 C167 Not Compatible Mercedes-Benz G-Class All W463 Not Compatible Installation Difficulty Level: Intermediate | Time: 2–3 Hours Professional installation is recommended if you're not comfortable working with vehicle electrical systems. Improper door trigger wiring can affect lock/unlock function. Park on level ground and engage parking brake. Disconnect negative battery terminal for safety. Locate OEM chassis mounting points beneath driver and passenger doors. Install stainless steel brackets using provided hardware; torque to 25 Nm. Slide motorised board assembly onto brackets and secure with locking fasteners. Route wiring harness along factory cable trays to driver-side door module. Splice door unlock trigger wire to running board harness (requires 12V switched signal). Reconnect battery and test automatic deployment/retraction cycle. Verify smooth operation at full extension and retraction limits. Final torque check on all fasteners. ⚠ Warning: If you are not confident splicing into door module wiring, have this completed by a qualified Mercedes technician. Incorrect wiring can disable central locking or trigger warning lights. Complete Your GLS/GL Upgrade Elevate cabin access and add a touch of automotive sophistication. These motorised running boards are engineered to the same standards as OEM Mercedes components—tested for reliability across European winters and summer heat. Ready to order? Shop Running Boards for X167 Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide DHL, FedEx, UPS ✅ 30-day money-back guarantee Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler-Benz, or any official franchised dealer. All product names and marks are the property of their respective owners. This product is designed and tested for the Mercedes-Benz GLS/GL X167 platform (2020+) and is not an OEM component. Installation at a qualified Mercedes service centre is recommended. Warranty does not cover improper installation or electrical modification beyond the scope of this guide. ```

BMW · X5 E70 · Electrical Electric Rear Door Support Strut for BMW X5 (2007–2013) OEM-spec power tailgate lift with integrated electric actuation. Direct replacement for OE LH & RH positions. E70 / E71 2007–2013 3.0si · 4.8i · xDrive Models Liftgate Lift Electric Strut 12-Month Warranty Overview The BMW X5 E70 (2007–2013) established the modern luxury SUV template—and its powered tailgate became a defining convenience feature. Over time, the electric rear door support struts fatigue from constant actuation cycles. A failing strut means your powered liftgate drops under its own weight, creating a safety hazard and eliminating one of the X5's core selling points. This Partsmost electric rear door support strut restores full power liftgate functionality with OEM-level engineering. Manufactured to original equipment specifications, it integrates seamlessly with your X5's electrical system and matches the precise geometry, load rating, and motion profile of the factory component. Every E70 X5 requires a pair—one for each side. These struts are identical in function but differ by position code (LH 51247332695 / RH 51247332696). Professional installation is essential; the struts are pre-charged and require careful handling and proper connectorisation to the vehicle's power network. What's Included ⚡ 1× Electric Strut (LH or RH) Select position at checkout ✓ OEM Part Numbers 51247332695 / 51247332696 📋 12-Month Guarantee Full replacement coverage 🔧 Plug-and-Play Connector OEM-matched electrical interface Product Highlights Direct replacement for OEM struts (51247294587, 51244887651 variants supported) Electric actuation—integrates with factory power liftgate module Stable performance under full X5 tailgate load (glass + metal assembly) Fast, easy installation (professional technician recommended) Metal construction—hardened alloy cylinder with sealed rod No chemical additives or high-concern materials (RoHS compliant) Manufactured in China; imported by Partsmost with QA inspection Tested for 50,000+ actuation cycles (typical use warranty period) Left & right position-coded; order pairs for complete system function Backed by Partsmost's established reputation in BMW electrical components Compatibility Table Model & Year Engine / Trim Position Part Number Status BMW X5 3.0si (2007–2013) 3.0L Naturally Aspirated LH / RH 51247332695 / 96 Direct Fit BMW X5 4.8i (2007–2013) 4.8L V8 LH / RH 51247332695 / 96 Direct Fit BMW X5 xDrive30i (2007–2013) 3.0L TwinTurbo LH / RH 51247332695 / 96 Direct Fit BMW X5 xDrive35d (2007–2013) 3.0L Diesel LH / RH 51247332695 / 96 Direct Fit BMW X5 xDrive35i (2007–2013) 3.0L TwinTurbo LH / RH 51247332695 / 96 Direct Fit BMW X5 xDrive48i (2007–2013) 4.8L V8 LH / RH 51247332695 / 96 Direct Fit BMW X5 xDrive50i (2007–2013) 4.8L V8 LH / RH 51247332695 / 96 Direct Fit BMW X5 M Sport (2007–2013) 4.4L TwinTurbo LH / RH 51247332695 / 96 Direct Fit BMW X5 Base (2007–2013) 3.0si LH / RH 51247332695 / 96 Direct Fit Pre-2007 or Post-2013 X5 Any — — Not Compatible Installation Notes Difficulty Level: Intermediate to Advanced Estimated Time: 90–120 minutes (both struts, both sides) Disconnect the 12V battery negative terminal. Wait 5 minutes for residual power discharge. Open the tailgate fully and support it with a padded jack or stand. Never work under an unsupported tailgate. Locate the strut attachment points: upper tower (liftgate frame) and lower bracket (vehicle body frame). Disconnect the electrical connector at the strut base. Press the release tab gently; do not force. Remove the upper retaining bolt (13 mm socket, torque spec: 21 Nm / 15 lb-ft). Keep the tailgate supported. Remove the lower retaining bolt (same spec). Carefully withdraw the spent strut downward. Install the new strut: align the lower bracket first, insert the upper tower pin, and hand-tighten both bolts. Torque both bolts to 21 Nm in a cross pattern to ensure even load distribution. Reconnect the electrical connector: insert straight in until the clip engages with an audible click. Repeat steps 2–9 for the opposite side. Both struts must be replaced as a pair. Reconnect the 12V battery. Test the power liftgate from the interior switch. If the gate does not open smoothly or stops mid-travel, disconnect the battery and contact a certified BMW technician. ⚠️ Important: These struts are electrically active and contain pressurized gas. Do not attempt to disassemble, repair, or expose to high heat. Never apply force to the rod or cylinder. If either strut fails to actuat within 5 seconds of switch activation, stop use immediately and have the system diagnosed by a BMW specialist. Improper installation may disable your vehicle's safety systems. Why Choose This Strut? The Partsmost electric rear door support strut meets OEM specifications for the E70 X5 platform. It restores full power liftgate function—a feature that defines daily X5 ownership—and does so with the same engineering precision as the original component. Whether you're replacing a single failed strut or performing preventive maintenance on both sides, this unit integrates seamlessly into your vehicle's electrical and mechanical architecture. Paired with professional installation and proper care, you'll recover the effortless tailgate operation that BMW engineers designed into your X5. Ready to Restore Your Power Liftgate? Order your OEM-spec electric rear door support strut today. Select LH or RH position at checkout, or contact our specialists to discuss a complete pair for both sides. View in Shop Use code 22GET20 for 20% off when ordering 2 items. 30-Day Money-Back Guarantee 12-Month Warranty Worldwide DHL Shipping 4.9★ 12,300+ Reviews Questions? Ring +44 203 943 9919 (Mon–Fri, 9am–7pm) or reply to this email. Disclaimer: Victorious Automotive is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW subsidiary. All product names, logos, and brands are the property of their respective owners. This description is for informational purposes only and does not constitute OEM endorsement. Always consult your vehicle's service manual or a certified BMW technician before installation. Improper installation may void your vehicle's warranty or cause safety hazards.

Victorious Automotive · Land Rover & Range Rover · Tailgate Trim Electric Tailgate Door Frame Trim Sticker — Land Rover Discovery 5, Range Rover Evoque, Vogue, Sport & Velar A precision-cut tailgate frame trim that delivers factory-style protection and a refined finish to your electric tailgate aperture — no drilling, no fuss. Discovery 5 L462 Range Rover Evoque Range Rover Vogue Range Rover Sport Range Rover Velar Tailgate Trim Weather-Resistant Custom-Fit No-Drill Install Interior & Exterior Protection Overview Land Rover and Range Rover owners who use their vehicles regularly know how quickly the tailgate door frame can accumulate scuffs, micro-scratches, and surface wear — particularly around the electric aperture edge where luggage, equipment, and everyday use take their toll. It's one of the highest-contact areas on the vehicle and one of the easiest to overlook until the damage is already done. This Electric Tailgate Door Frame Trim Sticker has been engineered specifically for the Discovery 5, Range Rover Evoque, Vogue, Sport, and Velar. The precision-cut profile follows the exact geometry of the tailgate opening, sitting flush against the frame without any visible gaps or misalignment. Manufactured from a premium, weather-resistant material, it's built to endure whatever British roads — and beyond — throw at it. Beyond protection, the trim elevates the tailgate area visually, delivering a seamless, factory-integrated aesthetic that complements the existing interior and exterior finish of your vehicle. Installation requires no special tools and no permanent modifications — just a clean surface and a confident pair of hands. What's Included 🚪 Tailgate Door Frame Trim Sticker 1 × precision-cut trim panel, vehicle-specific profile 🧼 Surface Prep Wipe Pre-saturated cleaning wipe for optimal adhesion 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Custom-profiled cut for a seamless, factory-matched fit across all listed models Weather-resistant material withstands UV exposure, moisture, and temperature extremes Protects the tailgate frame from scuffs, scratches, and everyday loading wear Adhesive-backed design — no drilling, no screws, no permanent modification required Elevates the tailgate aperture with a clean, premium aesthetic finish Compatible with electric tailgate systems — no interference with sensors or mechanisms Slim-profile design integrates flush with the door frame, invisible from distance Easy to install solo in under 30 minutes with no specialist tools Designed specifically for Land Rover and Range Rover tailgate geometry Maintains resale value by protecting one of the highest-contact exterior areas Compatibility Vehicle Code / Generation Year Range Fit Land Rover Discovery 5 L462 2017–2024 Direct Fit Range Rover Evoque L538 / L551 2011–2024 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Velar L560 2017–2023 Direct Fit Range Rover Vogue L460 L460 2022–2026 Verify Before Purchase Range Rover Sport L461 L461 2022–2026 Verify Before Purchase Land Rover Defender L663 L663 2020–2026 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 Minutes  |  🛠 Tools Required: None Open the tailgate fully and allow the electric mechanism to settle in the open position before beginning. Thoroughly clean the tailgate door frame surface using the included prep wipe or an isopropyl alcohol solution. Remove all dust, grease, wax, and residue. Allow the surface to dry completely — at least 5 minutes — before attempting to fit the trim sticker. Carefully peel back approximately 20–30% of the protective backing from the trim sticker to expose the adhesive. Align the exposed section of the trim with one end of the tailgate frame, using the vehicle's edge geometry as a guide. Press firmly to bond. Gradually peel back the remaining backing while pressing the trim into place along the frame, working section by section to avoid air bubbles. Once fully applied, run your thumb or a soft cloth firmly along the entire trim to ensure complete adhesion and a flush, bubble-free finish. Allow the adhesive to cure for a minimum of 24 hours before subjecting the area to water or heavy use. ⚠ Important: Do not install in cold temperatures below 10°C — adhesive performance is significantly reduced. For best results, fit in a garage or heated environment. If surface is freshly waxed or ceramic coated, clean with IPA wipe immediately prior to installation. Shop by Your Vehicle Browse the full range of accessories curated specifically for your Land Rover or Range Rover: 🚙 Discovery 5 (L462) 2017–2024 accessories 🚙 Range Rover Evoque L538 & L551 accessories 🚙 Range Rover Vogue L405 2013–2021 accessories 🚙 Range Rover Sport L494 2013–2022 accessories 🚙 Range Rover Velar 2017–2023 accessories Protect What You Drive. Refine How It Looks. Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for precision accessories that fit, finish, and last. Buy any 2 items and save 20% with the code below. Shop Discovery 5 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Toyota Land Cruiser LC250 · Window Regulators Electric Window Lifter Upgrade – Toyota Land Cruiser Prado LC250 / J250 (2024–2025) A precision-engineered window regulator upgrade built exclusively for the LC250/J250 generation — restoring smooth, silent, and reliable electric window operation in one direct-fit assembly. LC250 / J250 2024–2025 Electric Window Lifter Reinforced Metal Frame Plug & Play OEM-Style Fitment First Edition 1958 Edition Left & Right Variants Off-Road Ready Overview The Toyota Land Cruiser Prado LC250 / J250 represents a significant generational leap — a vehicle engineered for those who demand capability without compromise, whether on urban roads or demanding terrain. As with any vehicle used to its full potential, the small details matter just as much as the headline hardware. Window regulators are among the most-used mechanical components in the cabin, and when they begin to slow, bind, or fail entirely, it's an immediate quality-of-life concern. This Electric Window Lifter Upgrade is designed from the ground up for the 2024–2025 LC250 and J250 chassis, providing a reinforced, motor-driven regulator assembly that slots directly into the factory door card without modification. The upgraded motor and mechanism deliver noticeably smoother and quieter operation compared to worn factory units, and the reinforced metal frame construction ensures it holds up to daily use and the vibrations inherent to serious off-road driving. Whether you're replacing a failed unit or simply want to bring your window operation back to — or beyond — factory feel, this assembly offers OEM-level fitment with performance-grade internals. Installation is plug-and-play: no wiring modifications, no coding, and no specialist tools required beyond standard workshop equipment. What's Included 🔩 Window Lifter Assembly Full regulator unit with pre-installed motor where applicable ⚡ Upgraded Motor Unit Pre-fitted high-grade electric motor (variant dependent) 📋 Fitment Reference Compatibility guidance included with the assembly Product Highlights Smooth, near-silent electric window operation restored or upgraded High-grade upgraded motor for improved responsiveness and speed Reinforced metal frame construction for long-term durability OEM-style direct fitment — no cutting, trimming or modifications Plug-and-play electrical connection — no coding or rewiring required Built to withstand off-road vibration and daily operational stress Compatible with both First Edition and 1958 Edition LC250 variants Available in left-hand and right-hand side variants Designed exclusively for the LC250/J250 — not a generic fit Long service life supported by high-grade component selection Vehicle Compatibility Model Chassis Code Year Range Variant Fitment Toyota Land Cruiser Prado LC250 / J250 2024–2025 Standard Direct Fit Toyota Land Cruiser Prado LC250 / J250 2024–2025 First Edition Direct Fit Toyota Land Cruiser Prado LC250 / J250 2024–2025 1958 Edition Direct Fit Toyota Land Cruiser Prado LC150 / J150 2009–2023 All Not Compatible Toyota Land Cruiser LC300 / J300 2021–2025 All Not Compatible Toyota Land Cruiser LC200 / J200 2007–2021 All Not Compatible Installation Notes Installation Overview — Difficulty: Moderate · Estimated Time: 45–90 Minutes Per Door Disconnect the vehicle battery before beginning any door panel work to prevent accidental window operation during installation. Remove the interior door card carefully using appropriate plastic trim tools to avoid cracking the panel clips — LC250 door cards use a combination of screw fixings and push-fit clips. Peel back the door membrane to access the regulator mounting area. Take care not to tear the membrane seal as it prevents moisture ingress. Disconnect the factory window lifter electrical connector and unbolt the existing regulator assembly from the door shell — typically four to six bolts depending on the door position. Transfer the window glass to the new regulator by sliding the glass channel clips into the upgraded unit and securing as per the factory fixings. Bolt the new assembly into place using the factory mounting holes, reconnect the electrical plug, and test operation before reassembling the door membrane and card. Restore the door panel, reconnect the battery, and cycle the window fully up and down several times to confirm smooth and consistent operation. Important: Professional installation is recommended if you are unfamiliar with door card removal on the LC250/J250. Incorrect reassembly of the door membrane can lead to water ingress. Always verify your door side (left or right, front or rear) before ordering — check the variant selector carefully. Complete Your LC250 Build Explore the full range of Toyota Land Cruiser LC250 accessories at Victorious Automotive — trusted by 12,300+ owners worldwide with a 4.9-star verified rating. Shop All LC250 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any associated OEM brand. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious · Cooling System · Electronic Control Electronic Fan Control Module for Land Rover LR2 · Range Rover Evoque · Discovery Sport OEM-grade fan control electronics for reliable thermal management across petrol and diesel engines—single or dual-fan configuration. LR2 2006–2014 Evoque 2012–2018 Discovery Sport 2015+ Dual-Fan Config Single-Fan Config 2.0L–3.2L Petrol 2.2 Turbo Diesel Overview Whether you're piloting a Freelander LR2, Range Rover Evoque, or Discovery Sport L550, thermal management is non-negotiable. This OEM-specification electronic fan control module regulates cooling fan operation across 2.0L, 2.2L, and 3.2L powertrains—maintaining optimal engine temperature under all conditions and eliminating the guesswork of aftermarket electronics. Land Rover's factory fan control systems are engineered to work seamlessly with your vehicle's onboard diagnostics. A failing or degraded control module can cause uneven cooling, reduced efficiency, and engine strain. This replacement unit restores precise fan engagement timing, protecting your engine investment while delivering the reliability you demand from a British 4x4. Available in both single and dual-fan configurations, it's a plug-and-play solution that requires no reprogram and maintains full OEM sensor integration. Choose your version at checkout and rest easy knowing your cooling system is operating exactly as designed. What's Included ⚙️ Electronic Control Module OEM-spec, factory calibration 📋 Full Part Number Reference All compatible variants listed 🔧 Installation Guide Step-by-step fit notes ✅ 12-Month Warranty Partsmost brand guarantee Product Highlights OEM-quality thermal management electronics—no compromise on cooling performance Direct fit for LR2, Evoque, Discovery Sport, and Volvo cross-platform models Available in single-fan (LR026078, LR044833) or dual-fan (LR045248, LR100364) configuration Full sensor integration with factory diagnostics—no recoding required Compatible with 2.0L, 2.2L Turbo Diesel, and 3.2L Petrol engines Sealed module design resists moisture and thermal cycling stress Precise PWM (pulse-width modulation) fan speed control for efficiency Restores smooth fan engagement and eliminates racing behavior Proven in field—thousands of successful installs across Europe and beyond 12-month parts warranty + 30-day money-back guarantee from Victorious Compatibility Chart Vehicle & Year Engine Config Part Number Fit Land Rover Freelander LR2 (2006–2014) 2.0L / 3.2L Petrol, 2.2L TD4 Single LR026078, LR044833 Direct Fit Range Rover Evoque (2012–2018) 2.0L Petrol Single LR044833 Direct Fit Discovery Sport L550 (2015–) 2.0L Petrol Single LR044833 Direct Fit Range Rover Evoque (2012–2018) 2.0L Petrol (Higher Spec) Dual LR045248, LR100364 Direct Fit Discovery Sport L550 (2015–) 2.0L Petrol (Dual Fan) Dual LR100364 Direct Fit Volvo S60 II / S80 II / V60 / V70 III / XC60 / XC70 II 2.0L–2.5L Petrol Dual 31305106, 31338823 Direct Fit Important: Verify your OEM part number before checkout. Cross-reference against your current module or vehicle build sheet. Contact us at +44 203 943 9919 with your VIN if unsure. Installation Notes Difficulty: Intermediate | Time: 45–90 minutes Disconnect battery negative terminal and allow 10+ minutes for residual power to dissipate. Safety first. Locate the control module beneath the radiator fan shroud or within the engine bay cooling circuit (location varies by model). Consult your service manual for exact position. Disconnect the OEM harness carefully—note connector orientation. Take a photo for reference. Remove the mounting bracket bolts (typically 2–3 × M6 fasteners). Set aside hardware in a labeled container. Position the new module into the mounting bracket, aligning connectors toward the harness. Secure mounting bolts hand-tight first, then torque to 8–12 N·m (6–9 ft·lb). Do not over-tighten. Connect the harness with a firm, seated click. Verify no pins are bent or loose before proceeding. Reconnect the battery negative terminal and start the engine. Allow 30 seconds for module self-check. Monitor fan engagement during idle and light throttle. Fans should activate smoothly at ~85°C and modulate based on load. Clear any diagnostic codes using a Land Rover–compatible scanner if your module prompted a fault code during initial startup. Pro Tip: If the cooling fans do not engage after installation, verify battery voltage (12V+), harness continuity, and coolant temperature sensor function before troubleshooting the module itself. Why Victorious? We've spent over a decade sourcing OEM-grade cooling components for Land Rover and Range Rover enthusiasts. This module isn't a bargain-basement import—it's a verified part that meets factory tolerances and carries our 30-day money-back guarantee. If you're not satisfied, we'll refund you, no questions asked. Keep Your Engine Cool Thermal management is the foundation of engine longevity. Trust OEM engineering, trust Victorious. Shop Now – Electronic Fan Control Module Use code 22GET20 for 20% off when you purchase any 2 items. 4.9★ 12,300+ verified reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✅ 30-day money-back guarantee Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or a subsidiary of Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All trademarks, logos, and brand references are the property of their respective holders. Product compatibility information is provided for reference only. Always verify fitment with your vehicle's VIN or OEM documentation before purchase.

Victorious Automotive · Range Rover Evoque · Interior Accessories Electronic Handbrake Sticker for Range Rover Evoque (2011–2018) – Zinc Alloy Interior Trim Upgrade A precision-crafted zinc alloy overlay that transforms your Evoque's electronic parking brake button into a refined, premium-finish focal point — no tools, no fuss. Range Rover Evoque 2011–2018 Zinc Alloy Interior Trim Electronic Handbrake No-Drill Fit Direct Adhesive 80g Overview The Range Rover Evoque introduced a generation of drivers to compact luxury SUV ownership — a vehicle that pairs genuine Land Rover capability with sharp, design-forward interiors. From the 2011 debut through to the final run of the first-generation Evoque in 2018, owners have always known that the details inside the cabin matter just as much as the badge on the bonnet. This electronic handbrake sticker is a small upgrade that delivers an outsized visual impact. Machined from zinc alloy and finished to a premium standard, it sits directly over your existing electronic parking brake button, replacing the factory plastic surround with something that feels far more intentional. The weight and solidity of zinc alloy gives your fingertips an immediate sense of quality every time you engage or release the brake. It's the kind of detail that Evoque owners who appreciate their cabin notice immediately — and guests notice shortly after. Paired with other interior accents, it contributes to that layered, bespoke look that takes a factory-spec interior to something closer to a true personalisation project. What's Included 🔩 Zinc Alloy Handbrake Sticker 1× premium overlay, pre-finished and ready to fit 🔧 Adhesive Backing Pre-applied for clean, secure placement 📋 Fitting Guide Simple step-by-step placement instructions 📦 Protective Packaging Secured for transit to arrive damage-free Product Highlights Designed specifically for the first-generation Range Rover Evoque (2011–2018) Durable zinc alloy construction — resistant to scratching and daily wear Premium surface finish that complements factory interior trim tones Direct-fit overlay — no drilling, cutting, or modification required Pre-applied adhesive backing for clean, confident placement Lightweight yet substantial — 80g for a premium tactile feel Covers and enhances the factory plastic parking brake surround Reversible installation — removable without damage to OEM components Pairs seamlessly with other Evoque interior trim accessories Arrives fully finished — no polishing or preparation required Compatibility Model Years Variant Fitment Range Rover Evoque (L538) 2011–2018 Pure / Prestige / Dynamic / SE Direct Fit Range Rover Evoque Convertible 2016–2018 HSE Dynamic Direct Fit Range Rover Evoque (L551) 2019–present All Variants Not Compatible Range Rover Sport (L494) 2013–2020 All Variants Not Compatible Range Rover Velar 2018–2022 All Variants Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure the vehicle is parked with the electronic parking brake engaged and the ignition off. Clean the surface of the existing parking brake button surround thoroughly using an isopropyl alcohol wipe or lint-free cloth — remove any dust, grease, or fingerprints. Allow the surface to dry completely before proceeding. Carefully peel the protective film from the adhesive backing on the zinc alloy sticker. Align the overlay precisely over the factory parking brake button, taking care to match the positioning before pressing down. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure a strong bond. Allow the adhesive to cure for at least one hour before regular use. Note: Ensure the electronic parking brake function is not obstructed after fitting. The sticker is a decorative overlay only and must not interfere with the button's operation. If resistance is felt when engaging or releasing the brake after fitting, remove the overlay immediately. Elevate Every Detail of Your Evoque At Victorious Automotive, we believe the interior of your Range Rover deserves the same attention as the exterior. Browse our full range of Evoque accessories and build the cabin you've always wanted — one considered upgrade at a time. Shop All Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

```html Victorious Automotive · Range Rover & Discovery · Cooling System Engine Block to Heater Water Hose – L405 | L494 | L462 Premium OE-spec replacement hose engineered to restore efficient coolant flow and maintain optimal engine temperature across all modern petrol platforms. Range Rover L405 2013+ Range Rover Sport L494 2014+ Discovery V L462 2017+ OEM LR034616 | LR034624 Premium Rubber & Steel Petrol V6 & V8 Overview The engine block to heater inlet hose is a critical coolant passage that prevents overheating and maintains thermal stability across Range Rover Vogue, Range Rover Sport, and Discovery 5 platforms. Over time, OEM rubber hoses degrade from constant temperature cycling, pressure stress, and age—leading to coolant leaks, inefficient cabin heating, and potential engine damage. This Partsmost aftermarket replacement is engineered to OEM specifications and matches the exact fitment of your original equipment. Whether you're replacing a weeping hose before it fails or restoring a vehicle with compromised cooling performance, this hose restores reliability and peace of mind. Each hose is manufactured to withstand the full temperature and pressure envelope of your engine—from cold morning starts to extended highway cruising—with superior durability and chemical resistance. What's Included 🔧 Engine Block Heater Hose LR034616 or LR034624 variant Product Highlights OE-equivalent construction meets OEM cooling system pressure and temperature specs Premium rubber compound resists coolant degradation and thermal stress Direct fit—no modification or adapter kit required Engineered for 3.0L SC V6, 5.0L SC V8, and 5.0L petrol engines Superior bend radius prevents kinking and maintains consistent coolant velocity Steel reinforcement layers ensure durability under sustained pressure cycles Factory hose routing compatibility with original mounting brackets and clips New condition—not reconditioned or refurbished stock 12-month manufacturer warranty from date of purchase Backed by 30-day money-back guarantee from Victorious Automotive Compatibility Matrix Vehicle Model Code Years Engine Fitment Range Rover Vogue L405 2013–2020 3.0L SC V6 | 5.0L SC V8 | 5.0L Petrol Direct Fit Range Rover Sport L494 2014–2020 3.0L SC V6 | 5.0L SC V8 | 5.0L Petrol Direct Fit Land Rover Discovery V L462 2017+ 3.0L SC V6 Petrol Direct Fit Range Rover Vogue New L460 2022+ All petrol engines Not Compatible Range Rover Sport New L461 2022+ All engines Not Compatible Installation & Service Notes Difficulty: Intermediate | Time: 1.5–2 hours Disconnect the negative battery terminal and allow the engine to cool for at least 30 minutes. Locate the engine block heater inlet connection below the intake manifold (passenger side on V6 engines, driver side on V8 engines). Place a drain pan beneath the hose connection. Loosen the hose clamp using a flathead screwdriver and gently twist the hose to break the seal. Slide the old hose off the inlet stub. Inspect the stub for corrosion or damage; clean with a soft cloth if needed. Position the new hose over the inlet and tighten the factory hose clamp firmly—do not over-tighten, as this can compress the reinforcement and restrict flow. Route the hose along the same path as the original, using factory clips and tie-downs to prevent abrasion against hot engine surfaces or sharp edges. Reconnect the negative battery terminal and refill the coolant reservoir to the full mark using OEM coolant only. Start the engine and allow it to idle for 2–3 minutes, then inspect all connections for leaks before taking to operating temperature. Warning: Never disturb cooling hoses on a hot engine. High-pressure coolant can cause severe burns. Allow a minimum 30-minute cool-down period before disconnecting any hose or opening the coolant reservoir. Ready to Restore Cooling Efficiency? Keep your Range Rover or Discovery running cool and leak-free with an OE-spec replacement hose from Victorious Automotive. Fast worldwide shipping and a 30-day money-back guarantee on every order. Shop Engine Block Heater Hose Now 22GET20 Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 from 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ Live support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All vehicle names, badges, and model codes are used solely for compatibility reference. Product descriptions are for informational purposes only and do not imply endorsement by any manufacturer. ```

Victorious · Cooling System · Range Rover / Discovery Engine Block to Heater Water Hose – Range Rover & Discovery Direct OEM replacement heater inlet hose for Range Rover L405, Sport L494, and Discovery 5 – engineered to factory spec for reliable heat circulation. LR034616 / LR034624 2013–2020 Range Rover 2014–2020 Range Rover Sport 2017–2026 Discovery Silicone Blend Direct Fit Overview The engine block to heater water hose is a critical component in your Range Rover L405, Range Rover Sport L494, or Land Rover Discovery 5's cooling system. This hose channels heated coolant from the engine block to the heater core, enabling cabin warmth and defroster function. Over time, factory hoses degrade due to thermal cycling, pressure fluctuations, and coolant chemistry, leading to leaks, reduced heat output, or complete failure. Our Victorious replacement hose is manufactured to exact OEM specifications using premium silicone-reinforced rubber, matching the fitment and performance of Land Rover's original equipment. We supply either part number LR034616 (engine block to heater inlet hose) or LR034624 (heater water hose variant)—both tested for pressure rating, temperature range (−40°C to +120°C), and direct engine integration on your specific model year. Installation is straightforward for most owners; disconnecting old hose, flushing the coolant circuit, and clipping the new hose into place takes 30–45 minutes. No special tools required—just standard wrenches and a coolant container. We include a 30-day money-back guarantee and full technical support by phone. What's Included 🔧 Heater Water Hose OEM-spec silicone blend, pressure-rated 📋 Installation Guide Step-by-step removal & fitting instructions 📞 Technical Support Lifetime expert assistance by phone ✅ 30-Day Guarantee Money-back if not satisfied Product Highlights OEM-Spec Fitment – Matches Land Rover factory dimensions, clips, and connector points exactly Pressure & Temp Rated – Handles coolant pressures up to 1.4 bar and temps −40°C to +120°C Silicone-Reinforced Rubber – Superior flex and durability compared to standard hoses No Core Charge – Full part, no exchange fee required Dual Part Number Coverage – LR034616 or LR034624 (we advise on correct variant) Pre-Assembled – Ready to install; no splicing or crimping needed Worldwide DHL/FedEx Shipping – Arrives within 4–7 business days Fits L405, L494, and Discovery 5 – 3.0L SC V6 and 5.0L petrol engines Drop-In Replacement – No engine bay modifications or adaptors Backed by 12-Month Manufacturer Warranty – Plus our 30-day money-back promise Compatibility Matrix Vehicle Year Range Engine Part Number Fit Range Rover Vogue (L405) 2013–2020 3.0L SC V6 LR034616 / LR034624 Direct Fit Range Rover Vogue (L405) 2013–2020 5.0L SC V8 LR034616 / LR034624 Direct Fit Range Rover Sport (L494) 2014–2020 3.0L SC V6 LR034616 / LR034624 Direct Fit Range Rover Sport (L494) 2014–2020 5.0L Petrol LR034616 / LR034624 Direct Fit Land Rover Discovery 5 (V) 2017–2026 3.0L SC V6 LR034616 / LR034624 Direct Fit Range Rover Evoque 2011–2019 All petrol Not compatible Different hose Range Rover Velar 2018–2022 All petrol Not compatible Different design Installation Notes Difficulty: Beginner–Intermediate | Time: 30–45 minutes Safety First: Allow engine to cool completely (minimum 2 hours). Disconnect negative battery terminal. Drain Coolant: Locate coolant drain plug on radiator or block; drain into a clean container for reuse or disposal. Remove Old Hose: Unbolt or unclip hose clamps at engine block and heater valve. Gently pull hose free—some residual coolant will drain. Flush Connections: Use a rag to clean corrosion or debris from block and heater inlet ports. Route New Hose: Thread new hose along factory path, following existing cable ties and clips. Avoid sharp edges and moving components. Secure Clamps: Slide hose clamps onto new hose and tighten at engine block and heater valve. Hand-tighten first, then use a screwdriver to secure (do not over-torque). Refill Coolant: Refill reservoir with original coolant mix. Start engine and check for leaks while running 2–3 minutes. Bleed Air: Pause, allow to cool slightly, and top up reservoir if needed. Air pockets in cooling lines will self-bleed over normal operation. Reconnect Battery: Reinstall negative terminal; vehicle will relearn immobiliser settings on next start. Final Check: Run heater on full; verify warm air from cabin vents within 60 seconds of engine warming. ⚠ Important: Never open coolant cap on a hot engine. Use genuine or OEM-equivalent coolant only (blue, orange, or pink mixtures—confirm with your manual). If coolant smells sweet or you spot puddles under the vehicle within 24 hours, stop driving immediately and contact our technical team. Ready to Restore Heat & Reliability A failed heater hose is more than a comfort issue—it can accelerate engine wear and reduce defroster function in winter. Our OEM-spec replacement restores factory performance and gives you confidence on long journeys. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) 🚚 Worldwide DHL/FedEx/UPS shipping ✅ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All product names and trademarks are the property of their respective owners. This hose meets OEM specification and fits the vehicles listed above; compatibility with your specific vehicle should be confirmed by VIN or by contacting our technical team before purchase.

```html Victorious · Mercedes · Cooling System Engine Coolant Water Pump Inlet Tube – Mercedes W203 C230 OE-spec PA66 feed line restores cooling system integrity on 2003–2005 C230 Kompressor models. W203 C230 2003–2005 PA66 GF30 Direct Fit OEM Part Overview The Mercedes-Benz W203 C230 Kompressor (2003–2005) relies on a precision coolant feed system to maintain thermal stability in its 1.8L supercharged petrol engine. Over time, the PA66 reinforced nylon inlet tube connecting the water pump to the cylinder head can develop micro-fractures, leaks, or complete failure—leading to coolant loss, overheating, and potential engine damage. This OE-specification water pump inlet feed line (part numbers A2712001152 and A2712001552) is manufactured to original equipment tolerances using glass-filled PA66 composite. It delivers coolant from the water pump to the cylinder head inlet port with zero deviation from factory performance. Direct fit, no modification required. Whether you're addressing an active leak, preventative maintenance on a high-mileage C230, or restoring a cooling system rebuild, this component restores confidence and cooling efficiency to your engine bay. What's Included 📦 Water Pump Feed Pipe OE-spec inlet tube, ready to install 🔧 Direct Fit Design No adapters, modifications, or fabrication ✓ Factory Fitment 38cm length, 12cm width, engineered to spec 🛡️ 1-Year Warranty Full manufacturer coverage included Product Highlights PA66 GF30 Material: Glass-filled nylon rated for 100°C+ coolant temps Dual Part Numbers: Fits A2712001152 and A2712001552 applications Zero Coolant Weeping: Precision-molded connections eliminate micro-leaks Thermal Stability: Resists embrittlement and micro-fracture over time OEM Quality Control: Meets Mercedes factory specifications exactly W203 C230 Only: 2003, 2004, 2005 Kompressor models (all variants) 1.8L Petrol Engine: Supercharged four-cylinder fitment verified Quick Swap: Typical installation time 30–45 minutes with basic tools Preventative Upgrade: Install during water pump or thermostat service Two Packaging Options: Type A (loose) or Type B (plastic-wrapped) Compatibility Table Vehicle Model Year Range Engine Status Mercedes C230 Kompressor Classic Sedan 2004–2005 1.8L Supercharged Direct Fit Mercedes C230 Kompressor Coupe 2003–2005 1.8L Supercharged Direct Fit Mercedes C230 Kompressor Elegance Sedan 2004–2005 1.8L Supercharged Direct Fit Mercedes C230 Kompressor Sport Sedan 2004–2005 1.8L Supercharged Direct Fit Mercedes C230 Kompressor Sedan 2003–2005 1.8L Supercharged Direct Fit W203 C-Class (all other engines) 2003–2005 2.0L, 2.6L, 3.2L Not Compatible W202 C-Class (previous generation) 1993–2001 All Not Compatible Installation Notes Difficulty: Intermediate | Time: 30–45 minutes Coolant System Drain: Allow engine to cool fully. Place a catch pan beneath the radiator lower hose. Open the radiator drain valve and drain coolant completely. (Disposal: recycle used coolant at an auto parts store or mechanic facility.) Water Pump Access: Remove the serpentine belt tensioner and belt to expose the water pump and inlet tube assembly. Unbolt the pump from the timing cover. Remove Old Feed Pipe: Disconnect the cylinder head inlet connection (upper hose clip). Unbolt the tube bracket from the engine block. The tube should pull free with gentle twisting—do not force. Install New Feed Line: Position the new tube so both ends align with the water pump outlet and cylinder head inlet port. Hand-tighten all clips and bolts; check alignment before final torquing. Torque Specification: Tighten mount bolts to 8–10 Nm (6–7 lb-ft). Do not over-tighten; PA66 can crack under excessive load. Refill Coolant System: Close the radiator drain. Fill the radiator and expansion tank with OEM coolant (typically MB 325.3 spec). Bleed air from the system by running the engine at idle with the cap off until steady coolant flow is observed. System Pressure Test: Install radiator cap and run the engine to 80°C. Monitor for leaks at all connection points. Recheck after 5 minutes at operating temperature. Belt Reassembly: Reinstall the serpentine belt and tensioner. Verify all belt edges are properly seated. ⚠ Important: Coolant is toxic. Dispose of drained fluid responsibly and keep it away from children and pets. Do not tighten connections beyond hand-tight plus a quarter turn; the PA66 tube can split under over-torque. If coolant seeps after installation, loosen the clip slightly and re-seat the connection—do not add sealant to this assembly. Ready to Restore Your C230's Cooling System? This OE-spec inlet feed tube is the foundation of a reliable coolant circuit on your 2003–2005 Mercedes W203 C230 Kompressor. Order now and install with confidence—backed by our 30-day money-back guarantee and lifetime technical support. Shop Now Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS shipping 📞 UK support: +44 203 943 9919 Victorious Automotive is not affiliated with Mercedes-Benz, Daimler AG, or Jaguar Land Rover. All product names, logos, and trademarks are the property of their respective owners. This description is provided for compatibility reference only and does not imply endorsement or warranty from the OEM manufacturer. ```

Victorious · Mercedes W203 · Cooling System Engine Coolant Water Pump Inlet Pipe for Mercedes C230 W203 2003–2005 OE-spec PA66 GF30 feed line restores proper coolant circulation and thermal stability. W203 2003–2005 C230 Kompressor 1.8L Petrol PA66 GF30 Direct Fit Overview The Mercedes-Benz W203 C230 Kompressor is a sophisticated compact sedan that demands precision engineering in every component—especially those responsible for engine thermal management. The cooling system's integrity depends entirely on the water pump inlet pipe, a critical conduit that delivers coolant from the radiator to the water pump and cylinder head. This water pump feed line is manufactured to original equipment specifications using reinforced PA66 GF30 polymer, engineered to withstand thermal cycling, pressure fluctuations, and the demanding environment of the C230's supercharged 1.8-litre petrol engine. Over time, original pipes develop micro-fractures, weeping seals, and internal degradation—leading to coolant loss, air pockets, and catastrophic overheating. Our direct-replacement inlet tube restores factory coolant flow, eliminates leaks, and ensures your C230 maintains optimal operating temperature. Fits all 2003–2005 C230 Kompressor variants, including sedan, coupe, and all trim levels (Classic, Elegance, Sport). What's Included 🔧 Water Pump Inlet Pipe PA66 GF30 reinforced polymer, OE dimensions 📋 Installation Guide Step-by-step instructions with torque specs Product Highlights OE-spec PA66 GF30 reinforced polymer resists thermal cycling and pressure fatigue Direct replacement for original feed line—no modification required Restores proper coolant circulation to water pump and cylinder head inlet Eliminates coolant seeping, leaks, and air pocket formation Maintains consistent operating temperature under boost conditions Prevents overheating and thermal-related engine stress Fits all 2003–2005 C230 Kompressor variants and trims Compatible with 1.8L supercharged petrol engines Part numbers: A2712001152, A2712001552, 2712001152, 2712001552 Backed by 1-year manufacturer warranty and Victorious 30-day guarantee Compatibility Vehicle Year Engine Fit Mercedes-Benz C230 Kompressor (Sedan) 2003–2005 1.8L Petrol Direct Fit Mercedes-Benz C230 Kompressor (Coupe) 2003–2005 1.8L Petrol Direct Fit Mercedes-Benz C230 Kompressor Classic (Sedan) 2004–2005 1.8L Petrol Direct Fit Mercedes-Benz C230 Kompressor Elegance (Sedan) 2004–2005 1.8L Petrol Direct Fit Mercedes-Benz C230 Kompressor Sport (Sedan) 2004–2005 1.8L Petrol Direct Fit All other W203 variants (non-C230) 2003–2007 Various Not Compatible Installation Notes Difficulty: Intermediate | Time: 1–2 hours Disconnect the negative battery terminal to prevent accidental coolant system pressurization. Allow the engine to cool completely—do not work on a warm cooling system. Locate the water pump feed line connecting the radiator to the water pump inlet and cylinder head. Disconnect hose clamps using a flat-head screwdriver or hose clamp tool. Carefully remove the old inlet pipe—expect residual coolant spillage. Inspect the connecting ports on the water pump and cylinder head for debris or damage. Position the new feed line, ensuring proper routing away from hot exhaust components. Secure with original hose clamps (typically two)—do not overtighten. Refill the cooling system with fresh Mercedes coolant to the cold fill line. Run the engine at idle for 5 minutes, then allow to cool and top up as needed. Check for leaks at both connection points before returning to service. Important: Never attempt cooling system work on a hot engine. Always dispose of old coolant responsibly. Ensure the radiator cap is secure and pressure relief is functioning before returning to normal driving. Ready to Restore Coolant Flow? Your C230 Kompressor's thermal stability depends on precision engineering. This OE-spec inlet pipe eliminates leaks and restores factory-grade coolant circulation—protecting your supercharged engine from overheating and stress. Shop Water Pump Inlet Pipes Use code 22GET20 for 20% off any 2 items 30-day money-back guarantee Worldwide DHL shipping 4.9/5 stars from 12,300+ reviews +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with Mercedes-Benz AG, Daimler-Benz, or Jaguar Land Rover. Mercedes-Benz and C230 are registered trademarks of their respective owners. This product is an aftermarket replacement component designed to meet or exceed OE specifications. Always verify fitment with your vehicle's VIN before purchase. Installation requires mechanical knowledge; improper installation may damage the cooling system. We recommend professional installation by a qualified technician.

Victorious Automotive · Toyota Land Cruiser LC250 · Engine Bay Accessories Engine Cover for Toyota Land Cruiser 250 – LC250 Prado (2024–2025) A precision-engineered ABS engine cover that delivers a factory-finished look under the bonnet of your LC250 — direct-fit, no modifications required. LC250 2024–2025 Land Cruiser Prado ABS Plastic Matte Black Direct Fit No Drilling Engine Bay Overview The Toyota Land Cruiser 250 — also known as the new-generation Prado — represents a significant leap forward in Toyota's flagship off-road lineage. With a redesigned platform, refined powertrain options, and a noticeably more premium interior, the LC250 attracts owners who expect excellence in every detail. That attention to detail shouldn't stop at the firewall. This engine cover has been developed specifically for the 2024 and 2025 LC250, engineered to sit flush over the engine bay with a clean, purposeful finish. Constructed from high-quality ABS — the same class of material used across OEM interior and exterior trim components — it delivers meaningful visual improvement without sacrificing the accessibility you need for routine maintenance. The cover aligns perfectly with the vehicle's original screw hole positions, meaning no drilling, no adhesive, and no guesswork. For LC250 owners who have invested in their vehicle's interior or exterior appearance, leaving an exposed, utilitarian engine bay feels inconsistent. This cover addresses that — discreetly, confidently, and without compromise. It's a small upgrade that reads clearly as the right decision every time you open the bonnet. What's Included 🛡️ Engine Cover × 1 ABS matte black, LC250-specific fitment 🔩 Mounting Hardware Aligns to OEM screw hole positions 📋 Fitment Guide Step-by-step installation reference Product Highlights Engineered exclusively for Toyota LC250 (2024–2025) Premium ABS construction — rigid, heat-resistant, durable Matte black finish — clean and consistent with OEM aesthetics Aligns to factory screw holes — zero modifications needed Improves the visual presentation of your engine bay instantly Lightweight design — no added stress on mounting points Resistant to engine bay heat and oil vapour exposure Tool-free or minimal-tool installation in under 15 minutes Removable for routine maintenance and servicing access Consistent finish that complements interior and exterior upgrades Compatibility Vehicle Code Years Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (250 Series) LC250 / J250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 Series J150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools: Screwdriver or trim tool (if required) Ensure the engine is fully cooled before beginning. Open the bonnet and secure it fully in the open position. Clear the engine bay area of any debris or loose items that may interfere with cover placement. Position the engine cover over the engine bay, aligning the mounting points with the vehicle's original OEM screw hole locations. Hand-tighten or clip the cover into place depending on the mounting mechanism — do not overtighten. Confirm the cover sits flush and level across all edges. Check for any contact with moving components or high-heat surfaces. Close the bonnet and verify clearance. Reopen and double-check fit before first drive. ⚠ Important: Verify your exact model year and engine variant before installation. This cover is designed for the LC250 (2024–2025) only. Always confirm the cover is fully secured and clear of any engine components before operating the vehicle. If unsure, consult a qualified technician. Complete Your LC250 Build Browse the full Victorious collection for the Toyota Land Cruiser LC250 — from interior enhancements to exterior protection. Every product is selected for fit, finish, and longevity. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and references are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle configuration before purchase.

Jetour · T2 2023–2025 · Exterior Engine Decorative Hood Cover for Jetour Traveller T2 Rugged ABS engine cover that shields your hood while adding hard-core off-road presence to your Jetour T2. Jetour T2 2023–2025 ABS Polymer Hood Protection Glue Installation Overview The Jetour Traveller T2 is built for adventure, and every detail should reflect that ethos. This Engine Decorative Hood Cover is precision-engineered from original vehicle data—delivering a perfect arc fit that looks factory-integrated, not aftermarket bolted-on. Crafted from premium ABS plastic, this cover blocks sand, gravel, and road debris from damaging your original hood while delivering unmistakable visual aggression. Whether you're navigating rough terrain or city streets, this piece commands attention and protects your investment without requiring holes or permanent modification. Two finish options—glossy black or matte black—let you dial in the aesthetic that matches your vision. Installation is tool-free and uses automotive-grade adhesive that holds firm without leaving marks. It's the kind of upgrade that rewards you twice: once visually, once practically. What's Included 🛡️ Engine Hood Cover ABS polymer, pre-cut to fit 🔗 Automotive Adhesive No holes required 📋 Installation Guide Step-by-step instructions ✔️ Quality Assurance 30-day money-back guarantee Product Highlights Precision Fit: Moulded from original T2 CAD data, arc-fitted for seamless integration Durable ABS: Scratch and wear-resistant; holds colour across seasons Debris Protection: Shields your hood from sand, gravel, and road splatter Two Finishes: Choose glossy black for showroom shine or matte black for understated aggression No Drilling: Uses premium automotive-grade adhesive; no permanent modifications Factory Look: Design integrates seamlessly—not a bolt-on afterthought Off-Road Aesthetic: Adds genuine hard-core presence to your Jetour T2 Easy Maintenance: Wipe-clean finish; resists UV fade and weathering Reversible: If needed, can be carefully removed without hood damage Instant Upgrade: Tool-free installation—transform your look in minutes Compatibility Model & Year Fit Status Jetour Traveller T2 (2023) Direct Fit Jetour Traveller T2 (2024) Direct Fit Jetour Traveller T2 (2025) Direct Fit Other Jetour models Not Compatible Not sure? Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) and we'll verify fitment for your specific vehicle at no charge. Installation Notes Difficulty Level: Easy | Time Required: 15–20 minutes Clean the hood surface thoroughly with a microfibre cloth and mild soapy water. Dry completely. Use isopropyl alcohol on a clean cloth to wipe the hood a second time. Let dry for 2 minutes. Position the cover on the hood and check alignment from multiple angles. Mark any final adjustments with masking tape. Peel back one corner of the adhesive backing and press firmly onto the hood. Work gradually across the entire cover, pressing out air bubbles as you go. Once fully adhered, allow 24 hours of cure time before washing or driving in rain. Important: Do not apply this cover in temperatures below 10°C or above 40°C. Adhesive performance is optimized within this range. For best results, apply in dry conditions with 50% or higher relative humidity. Ready to Elevate Your T2? This hood cover transforms your Jetour T2 from standard to commanding. It's protection and presence in one upgrade—available in glossy or matte black, shipped worldwide, backed by our 30-day guarantee. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ✓ 4.9/5 Stars • 12,300+ verified reviews ✓ Worldwide Shipping • DHL, FedEx, UPS, TNT ✓ 30-Day Guarantee • Full refund, no questions Victorious Automotive is not affiliated with, endorsed by, or connected to Jetour Automobile or any parent company. All product names, logos, and trademarks are property of their respective owners. This cover is a third-party accessory designed for compatibility.