Products

Victorious Automotive · Jaecoo J7 · Aerodynamics Front Bumper Lip Splitter in Gloss Black — Jaecoo J7 (2023–2025) Direct-fit aerodynamic upgrade that sharpens your J7's front end without modification—compatible with all powertrains. J7 (2023–2025) Petrol & PHEV ABS Plastic Gloss Black No Drilling Overview The Jaecoo J7 is a bold SUV that deserves equally bold styling—and this front bumper lip splitter delivers exactly that. Whether you own the Petrol or PHEV variant, this direct-fit aero upgrade transforms the front fascia with a refined, sportier presence that commands attention on any road. Engineered from durable ABS plastic with a premium gloss black finish, the splitter uses your J7's original mounting points—no drilling, no modification, no compromise. Installation takes under an hour and requires only basic tools. The result is a sharper, more aggressive front end that protects your original bumper from minor scrapes while adding visual aggression and genuine aero function. Built for J7 owners who understand that great design is about balance: form and function working in perfect harmony. This splitter does both. What's Included 📦 Front Bumper Lip Splitter Gloss black ABS construction 🔧 Mounting Hardware Kit All fasteners & clips included 📖 Installation Guide Step-by-step instructions 🛡️ Fitment Guarantee 30-day money-back promise Key Highlights Universal J7 Fitment: Works on all 2023–2025 Petrol & PHEV models Direct Fit Installation: Uses existing mounting points—zero modification Premium ABS Material: Lightweight, impact-resistant, UV-stable gloss black Aerodynamic Profile: Genuine downforce enhancement at highway speeds Bumper Protection: Shields original paint from minor contact damage Professional Finish: Factory-grade gloss black matches OEM quality Quick Install: 30–45 minutes with basic hand tools Durable Construction: Weather-resistant & impact-absorbing polymer Enhanced Road Presence: Adds 50mm of aggressive stance at the front Design Heritage: Inspired by premium automotive aero standards Compatibility Model & Year Powertrain Fitment Jaecoo J7 (2023–2025) Petrol ✓ Direct Fit Jaecoo J7 (2023–2025) PHEV ✓ Direct Fit Jaecoo J7 (Pre-2023) Any ✗ Not Compatible Other Jaecoo Models Any ✗ Not Compatible Installation Difficulty: Easy | Time: 30–45 minutes Prepare your vehicle: Park on level ground, ensure the engine is cold, and gather your toolkit (socket set, trim removal tools, safety glasses) Remove existing trim: Gently detach any bumper trim or protective covers using the provided trim removal tools to expose mounting points Position the splitter: Align the lip splitter with the factory mounting points on your bumper—check fit before fastening Secure fasteners: Insert provided clips and fasteners into mounting holes; tighten hand-snug first, then final-torque to specification Check alignment: Step back and verify the splitter sits flush with the bumper—no gaps, even panel lines Reinstall trim: Replace any covers or trim removed in step 2; ensure all clips are fully seated Final inspection: Walk around your J7, check that the splitter is symmetrical and secure, then take a lap to confirm stability at speed Note: Do not overtighten fasteners—ABS plastic can crack under excessive force. Use hand-snug tension and listen for the click-lock of each clip. Why Victorious Automotive We've been equipping discerning SUV and Land Rover owners since 2014. Our Jaecoo J7 collection represents the same precision and passion we bring to every product—expert curation, tested compatibility, and customer support that actually answers your questions. This splitter isn't a generic import. It's engineered specifically for the J7's bumper architecture, finished to automotive standards, and backed by our 30-day money-back guarantee. When you order from Victorious, you're buying confidence, not just parts. Ready to Sharpen Your J7? Transform your Jaecoo J7's front end with a splitter that combines form, function, and factory fitment. Ships worldwide via DHL, FedEx, UPS, and TNT. Shop Jaecoo Collection Unlock 20% Off Your Next Order Use code: 22GET20 Valid on any 2 items. Worldwide shipping. No minimum spend. 4.9 / 5 — 12,300+ verified reviews 30-Day — Money-back guarantee Free Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaecoo Automobile Ltd., Chery Automobile Co. Ltd., or their parent companies. All product names, logos, and trademarks referenced herein are the property of their respective owners. This product is designed for aftermarket fitment only and is provided as-is. Installation voids no manufacturer warranty—consult your vehicle's warranty documentation for specific terms. ```

Victorious · Defender 90/110 · Exterior Protection Front Bumper U Bar Bull Bar Cover for Land Rover Defender 90 110 Heavy-duty polypropylene bull bar combining rugged protection with refined aesthetics for classic and modern Defenders. Defender 90 Defender 110 1990–2016 Polypropylene Direct Fit Off-Road Ready Overview The Land Rover Defender 90 and 110 are workhorses that demand equally capable protection. Whether you're traversing challenging terrain or navigating urban environments, the front fascia faces constant exposure to impacts, debris, and weathering. A proper bull bar isn't just cosmetic—it's essential infrastructure for your vehicle. This front bumper U bar and cover assembly delivers both. Engineered from high-quality polypropylene, it provides genuine impact protection while maintaining clean, proportional design language that complements the Defender's classic proportions. The integrated U-channel structure distributes force across a wider contact area, reducing localized damage to the chassis. Installation is straightforward with included mounting hardware. The design accounts for factory bumper integration, meaning no permanent modifications to your Defender. It's the kind of accessory that looks like it should have been factory-fitted from day one. What's Included 🛡️ Front Bumper Cover Complete polypropylene assembly 🔧 U Bar Structure Integrated protective channel ⚙️ Mounting Hardware Stainless fasteners and brackets 📋 Fitting Instructions Step-by-step installation guide Product Highlights Precision-engineered for Defender 90 and 110 fitment Durable polypropylene resists UV, salt, and impact Integrated U bar design maximises structural strength Bolt-on installation—no welding required Factory-style integration with minimal aesthetic compromise Protects radiator, cooling system, and chassis from frontal impacts Lightweight design does not compromise fuel economy Compatible with standard accessory mounting points Weather-resistant finish maintains appearance long-term Cost-effective alternative to chassis damage repair Compatibility Model Year Fitment Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 90 (2020–2026) 2020–2026 Not Compatible Defender 110 (2020–2026) 2020–2026 Not Compatible Installation Notes Difficulty: Easy | Time: 45–90 minutes Ensure vehicle is on a level surface with engine off and cooled. Remove the factory bumper cover by unbolting fasteners (8–12 bolts depending on year). Position the new U bar assembly against the front chassis, aligning mounting holes with factory points. Install provided stainless steel fasteners, tightening in a cross pattern for even pressure. Verify all attachment points are secure; bump test the assembly gently before driving. Inspect fitment around edges for gaps; minor adjustment may be required. Note: If your Defender has been modified with a non-standard suspension or bumper height, test fitment before fully securing. Some winch-equipped vehicles may require spacer modification. Why Victorious This bull bar represents the kind of thoughtful engineering you expect from Victorious. We source materials that survive UK weather and tough off-road environments. Every Defender owner who has chosen our accessories knows that quality protection doesn't mean compromising on style—and this front bumper assembly proves it. Protect Your Defender Quality front protection is an investment in longevity. Add this U bar assembly to your Defender today and drive with confidence. Shop Defender Exterior Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All vehicle names and trademarks are property of their respective owners. Product compatibility is based on standard factory specifications; modifications to your vehicle may affect fitment.

Victorious · Jaecoo J7 · Exterior Styling Front Bumper Wind Knife Trim for 2024–2025 Jaecoo J7 Premium gloss-black fog light surrounds with tool-free 3M adhesive installation—no drilling, no permanent modifications. Jaecoo J7 2024–2025 ABS Polymer Gloss Black No-Drill Install Petrol & PHEV Overview The Jaecoo J7 has arrived with aggressive presence and purposeful design. Its front bumper architecture balances daylight running lights with fog light zones that define its authoritative stance. However, without the right trim, this area can feel visually flat or incomplete. This Front Bumper Wind Knife Trim transforms the J7's lower front fascia by framing the fog light apertures in premium gloss black. Engineered to 1:1 OEM geometry, each trim sits seamlessly within the bumper contours—no gaps, no overhang, no visual misalignment. The high-gloss finish creates depth and shadow, amplifying the J7's muscular character while adding a racing-inspired accent that catches light and defines the vehicle's profile. Installation takes 15 minutes. Three-mil 3M automotive adhesive bonds permanently without drilling, scarring, or requiring professional labour. Leave it to cure for 24 hours, and you have a factory-finished transformation that's completely reversible if needed—genuine automotive-grade engineering in a bolt-on accessory. What's Included 🎯 Left Wind Knife Trim Gloss black, pre-taped 🎯 Right Wind Knife Trim Gloss black, pre-taped ✓ 3M Adhesive Tape Pre-applied, dual-sided 📋 Installation Guide Step-by-step with photos Product Highlights 1:1 OEM Mould — Engineered from Jaecoo factory data; zero tolerance gaps Premium ABS Polymer — Impact-resistant, UV-stable, lightweight engineering-grade plastic Gloss Black Finish — High-gloss automotive-grade coating; resists fading and weathering 3M Dual-Sided Adhesive — Aircraft-grade bonding; rated for extreme temperatures and road vibration No Drilling Required — Zero modification to bumper, paint, or structure Tool-Free Installation — Clean, position, press, and set; complete in 15 minutes Reversible Bond — Removable without damage if needed; no residue Fog Light Protection — Shields apertures from stone chips, dirt, and minor impacts Factory Alignment — Sits flush with OEM bumper contours and sensor housings All Variants Covered — Fits 2024–2025 J7 Petrol and PHEV models identically Compatibility Jaecoo Model Year Engine Fit Status J7 2024–2025 Petrol & PHEV Direct Fit J7 2023 or earlier All Not Compatible J6 / Other All All Not Compatible Installation Notes Difficulty: Beginner · Time: 15 Minutes · Tools: None Prepare the Surface. Park on level ground. Using an alcohol pad or IPA (isopropyl alcohol), thoroughly clean both fog light surrounds and the back of each trim. Remove all dust, wax, grease, and road film. Dry completely with a lint-free cloth. Test-Fit Position. Without peeling the adhesive liner, place both trims onto the bumper. Align edges with the OEM bumper contours. Mark lightly with removable tape if needed. Step back and verify symmetry and flush fit. Apply Left Trim. Slowly peel the 3M tape liner from the left trim. Align to your marked position and press firmly across the entire surface for 3–5 minutes. Apply extra pressure to edges and corners. Apply Right Trim. Repeat the peel-and-press process for the right trim, ensuring equal pressure and alignment. Cure Period. Do not wash, drive, or expose to rain for 24 hours. Allow the adhesive to reach full bond strength in a dry, room-temperature environment. Final Check. After 24 hours, verify that both trims are secure. Gently test for wobbling or shifting. Confirm fog lights and proximity sensors function normally. Note: Professional installation is recommended if you lack confidence in DIY adhesive applications. Improper surface prep will compromise adhesive strength. Do not attempt removal within 48 hours of installation. Ready to Refine Your J7's Front End? Elevate the visual presence of your 2024–2025 Jaecoo J7 with precision-engineered trim that adds depth, character, and protected surfaces in one seamless upgrade. Shop Jaecoo Accessories Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL/FedEx +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Jaecoo, Chery Group, or any official motor manufacturer. All product names and vehicle designations are used for compatibility reference only. Terms & conditions apply. See full legal disclaimer on checkout.

Victorious · Defender 90/110 · Exterior Front Bumper with LED Lights for Land Rover Defender 90 & 110 Stainless steel front bumper with integrated LED lights, engineered for classic Defender 90 and 110 models with two distinctive styling options. Defender 90 Defender 110 1990–2016 Stainless Steel LED Integrated Front Bumper Overview The Land Rover Defender 90 and 110 define off-road heritage. They demand accessories that respect that legacy while modernising capability. This front bumper delivers both: traditional Defender proportions with contemporary LED integration, offering genuine protection without compromise. Crafted from premium stainless steel, this bumper resists corrosion across seasons and terrain. The integrated LED lighting package enhances visibility during low-light off-road work whilst maintaining authentic Defender aesthetics. Two styling configurations allow you to tailor the look to your build. Direct fit to both Defender 90 and 110 chassis. No modifications required. The modular design accounts for winch integration, allowing you to layer this bumper into a comprehensive protection system. What's Included 🛡️ Front Bumper Assembly Premium stainless steel, one-piece construction 💡 Integrated LED Lights Dual-side configuration with wiring harness 🔧 Mounting Hardware Stainless fasteners and brackets included 📋 Installation Guide Step-by-step photo instructions for both models Product Highlights Stainless steel construction resists salt, mud, and weather damage Integrated LED lights improve visibility without additional wiring complexity Two styling options adapt to modern or classic build aesthetics Direct fit: no cutting, drilling, or frame modification required Compatible with winch mounts and auxiliary lighting systems Lightweight design minimises impact on suspension geometry Pre-wired LED harness connects to existing vehicle electrical system Winch-ready design allows progressive protection layer integration Covers both Defender 90 and Defender 110 without variants Finished with protective coating to prevent oxidation over time Compatibility Model Generation Years Fit Defender 90 Classic (FA) 1990–2016 Direct Fit Defender 110 Classic (FA) 1990–2016 Direct Fit Defender 110 Station Wagon Classic (FA) 1990–2016 Direct Fit Defender 130 Classic (FA) 1990–2016 Not Compatible Defender L663 Modern 2020+ Not Compatible Installation Installation Overview Difficulty: Intermediate Estimated Time: 2–3 hours with a second person Tools Required: Socket set (metric), torque wrench, wire strippers, electrical test light, jack and axle stands Steps Raise and support the vehicle securely on level ground using axle stands. Disconnect the negative battery terminal to isolate the electrical system. Remove the original bumper by unbolting the attachment points at the chassis frame (typically 6–8 bolts). Carefully disconnect any existing light wiring by marking connections with tape for reference. Position the new stainless steel bumper assembly, aligning the mounting brackets with the frame attachment points. Install all mounting bolts hand-tight first, then torque to 35–45 Nm in a cross pattern. Route the pre-wired LED harness through the existing wiring loom behind the bumper. Connect the harness to your vehicle's lighting circuit (positive, negative, and ground as shown in the included diagram). Test LED functionality by turning on headlights and driving lights; use a test light to confirm continuity at each connection. Reinstall the battery terminal, lower the vehicle, and perform a final visual and functional inspection. Important: Ensure the vehicle is fully supported on axle stands before working underneath. Do not rely on a jack alone. If unfamiliar with electrical connections, consult a qualified technician to avoid short circuits or battery drain. Ready to Upgrade Your Defender? This front bumper combines heritage styling with modern protection. Order now and transform your Defender 90 or 110 into a more capable, visually distinctive machine. Shop Now Use code 22GET20 for 20% off when you buy any 2 Victorious items. ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars — 12,300+ verified reviews ✓ Worldwide Shipping — DHL, FedEx, UPS, TNT Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent specialist and is not affiliated with Land Rover, Jaguar Land Rover, or Range Rover. All vehicle names, logos, and references are property of their respective manufacturers. This product is designed for aftermarket fitment and is not an official Land Rover product. Fitment and compatibility depend on individual vehicle configuration; installation by a qualified technician is recommended.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling Front Centre Grille Hood Insert for Range Rover Vogue L405 (2014–2017) – Gloss Black Bumper Upgrade A precision-formed ABS grille insert that replaces the factory front bumper centre trim with a sharper, more aggressive aesthetic — engineered to fit your 2014–2017 Range Rover Vogue L405 without modification. Range Rover Vogue L405 2014–2017 ABS Construction Gloss Black Direct Replacement Front Bumper Hood Insert No Drilling Required Exterior Styling Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that rewards considered modifications with a look that genuinely distinguishes itself from the factory standard. The front fascia, in particular, is one area where subtle upgrades deliver outsized visual impact. The centre grille insert sits at the heart of that first impression. This Front Centre Grille Hood Insert is designed specifically for the 2014–2017 Range Rover Vogue L405 facelift generation. Formed from durable ABS thermoplastic and finished in a deep gloss black, it replaces the factory bumper centre surround with a cleaner, more assertive profile. The result is a more cohesive front-end appearance — particularly effective on vehicles already running black pack trim, darkened badges, or upgraded alloy wheels. The fitment is engineered as a direct replacement, meaning no cutting, drilling, or permanent modification to your vehicle. Installation is clean and reversible — making this an ideal first step in a broader exterior styling programme, or simply a standalone refresh for owners looking to modernise the Vogue's front end without straying from its inherent elegance. What's Included 🔲 Front Centre Grille Insert Gloss black ABS — qty 1, pre-formed to OEM profile 📄 Installation Guide Step-by-step fitting instructions included 🔩 Mounting Hardware Clips and fixings for secure, rattle-free attachment Product Highlights Designed exclusively for Range Rover Vogue L405 (2014–2017) — no universal fitment compromises Deep gloss black ABS finish complements black pack, dark chrome, and stealth styling packages Direct OEM-replacement fit — installs into existing mounting points without modification Lightweight yet rigid ABS thermoplastic construction withstands road vibration and weather exposure Enhances the front fascia with a more purposeful, contemporary aesthetic Fully reversible installation — original grille can be refitted at any time No specialist tools or workshop equipment required for fitting UV-stabilised finish resists fading and surface degradation over time Pairs naturally with gloss black badge overlays, window tint, and black alloy upgrades Clean, factory-level finish from the front — no visible fixings or gaps when installed correctly Compatibility Vehicle Code Year Range Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Vogue L405 2013 (pre-facelift) Verify Before Order Range Rover Vogue L405 2018–2021 (facelift) Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Park the vehicle on a flat surface with the engine off and fully cooled. Ensure you have adequate lighting and clear access to the front bumper. Carefully locate and remove the factory front bumper centre grille insert by releasing the OEM retaining clips — use a trim removal tool to avoid scratching surrounding surfaces. Fully remove the original insert and set aside. Clean the mounting area with a damp cloth and allow to dry before fitting the new grille. Align the new gloss black grille insert into the bumper aperture, ensuring all mounting tabs are correctly seated in their corresponding clip positions. Apply firm, even pressure across the grille face to engage all retaining clips until you hear or feel them click into place. Check for any gaps or flex along the perimeter. Step back and inspect the fitment from multiple angles under good light before considering the installation complete. No adhesive is required. ⚠ Please Note: Confirm your exact model year and bumper variant before purchasing. The 2013 pre-facelift L405 uses a slightly different front bumper profile that may not accept this insert without modification. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Vogue's Front End Thousands of Range Rover owners trust Victorious Automotive for exterior upgrades that look factory-correct and fit without compromise. Browse our full Range Rover Vogue L405 collection for complementary styling pieces — or call our specialists if you need guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment and compatibility purposes. All trademarks remain the property of their respective owners.

```html Victorious · Engine Parts · Land Rover & Jaguar Front Crankshaft Oil Seal for Range Rover, Discovery, Jaguar OEM-specification engine seal for 3.0L V6 and 5.0L V8 petrol engines. Direct replacement, 12-month warranty included. LR010706 / AJ811449 2010–2019 Engine Seal OEM Quality Direct Fit Overview This front crankshaft oil seal is engineered for Land Rover Range Rover, Discovery, Range Rover Sport, and Range Rover Velar, as well as Jaguar XJ, XE, XF, F-Type, and F-Pace models spanning 2010–2019. Built to OEM specifications, it delivers the same durability and precision fit as original equipment. The seal prevents oil leakage at the crankshaft front end, maintaining proper lubrication throughout your engine. A failing seal can result in visible oil drips, reduced oil pressure, and potential engine damage. This replacement restores factory integrity with zero compromises. Manufactured to German-origin standards under the Partsmost brand, this seal is a genuine aftermarket alternative that meets or exceeds OEM performance. Whether you're addressing a leak or performing preventive maintenance, this part delivers reliable, long-term protection for your engine. What's Included 📦 Front Crankshaft Oil Seal Single or dual unit options available 🔐 12-Month Warranty Full coverage on manufacturing defects ✓ Installation Guide Clear reference diagrams included 🚚 Free Worldwide Shipping DHL, FedEx, UPS, TNT available Product Highlights OEM specification design ensures perfect fitment and performance Compatible with 3.0L DOHC V6 and 5.0L OHC V8 petrol engines Prevents oil leakage and maintains proper engine pressure German-origin manufacturing—high-quality aftermarket alternative Easy installation with no modification required Part numbers: LR010706, AJ811449, 8W93-6700-AA Stable performance and long-term reliability Single or dual pack options for flexibility 12-month comprehensive warranty included Backed by 4.9/5-star customer reviews Compatibility Table Vehicle Year Range Engine Status Range Rover (L4) 2010–2012 5.0L V8 Petrol Direct Fit Discovery LR4 2010– 3.0L V6 Petrol Direct Fit Range Rover Sport (L494) 2014– 3.0L V6 Petrol Direct Fit Discovery (5th Gen) 2017– 3.0L V6 Petrol Direct Fit Range Rover Velar 2017– 3.0L V6 Petrol Direct Fit Jaguar XJ 2010–2019 3.0L V6 Petrol Direct Fit Jaguar F-Type 2014– 3.0L V6 Petrol Direct Fit Jaguar XE 2015– 5.0L V8 Petrol Direct Fit Jaguar XF 2016– 3.0L V6 Petrol Direct Fit Jaguar F-Pace 2016– 5.0L V8 Petrol Direct Fit Important: Always verify part numbers before purchase. Cross-reference your current seal or engine bay documentation with LR010706, AJ811449, or 8W93-6700-AA to confirm compatibility. Contact us with your VIN for absolute certainty. Installation Notes Difficulty Level: Intermediate | Time: 2–4 hours Prepare your vehicle: Disconnect the negative battery terminal and allow the engine to cool completely. Remove timing cover: Unbolt and carefully remove the front timing belt cover to access the crankshaft front pulley. Remove crankshaft pulley: Use a pulley removal tool to extract the pulley without damaging the crankshaft. Extract the old seal: Carefully pry out the worn seal using a seal removal tool or flat blade. Avoid scoring the seal surface on the crankshaft. Clean the seal bore: Wipe the crankshaft and seal bore with a lint-free cloth. Remove all residual oil and debris. Install the new seal: Lubricate the new seal lip lightly with fresh engine oil. Press it evenly into the bore using a seal installer tool, ensuring even depth. Reinstall pulley: Align and bolt the crankshaft pulley back in place. Torque to manufacturer specifications. Reassemble: Refit the timing cover, reconnect the battery, and run the engine at idle to confirm no oil leakage. Critical: Do not over-torque the pulley bolt or force the seal installation. If you encounter resistance, stop and consult a qualified technician. Improper installation can damage the crankshaft or seal bore. Ready to Restore Engine Integrity? This OEM-specification crankshaft oil seal stops leaks before they compromise your engine. Backed by a 12-month warranty and 4.9/5-star reviews, it's the trusted choice for Land Rover and Jaguar owners worldwide. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 12-Month Warranty ✓ 30-Day Money Back ✓ 4.9/5 Stars ✓ 12,300+ Reviews ✓ Free Worldwide Shipping Disclaimer: Victorious Automotive is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar Land Rover (JLR), or any manufacturer listed. All brand names and vehicle designations are the property of their respective owners. This product is an independent aftermarket replacement part designed to fit the specified vehicles. Always verify compatibility before purchase. ```

Victorious · Engine Components · Seals & Gaskets Front Crankshaft Oil Seal – Range Rover, Discovery, Velar & Jaguar OEM-specification oil seal protecting crankshaft bearings against leakage and contamination across 5.0L V8 and 3.0L V6 engines. RR / Discovery / Velar / XJ 2010–2019 Rubber & Steel OEM Direct Fit 12-Month Warranty Overview The front crankshaft oil seal is a precision-engineered component that sits at the interface between the engine block and crankshaft pulley. In Range Rover, Discovery, Velar and Jaguar models equipped with supercharged 5.0L V8 and 3.0L V6 engines, this seal prevents high-pressure oil from escaping the engine while blocking external contaminants. Over time, thermal cycling and exposure to engine heat can cause the rubber compound to harden and crack, leading to oil seepage onto the timing cover and eventually pooling below the vehicle. A leaking front seal often goes unnoticed until oil accumulates on the chassis or a shop inspection reveals the problem. Early replacement—especially if you notice fresh oil on the lower engine block or timing cover—can prevent secondary damage to belts, pulleys and sensors. This component is manufactured to OEM specification (part numbers LR010706 / AJ811449) ensuring exact fitment and long-term reliability. Victorious supplies this seal in single or dual-pack options. Installation requires removal of the crankshaft pulley and brief engine access; most technicians complete the job in under two hours. The seal itself costs a fraction of engine rebuild work, making proactive replacement an investment in peace of mind. What's Included ⚙️ Front Crankshaft Oil Seal Rubber & steel construction, OEM-spec 📋 Installation Guide Part numbers & fitment reference ✓ 12-Month Warranty Manufacturer defect protection 🌍 Worldwide Shipping DHL, FedEx, UPS, TNT available Product Highlights OEM-specification engineering (LR010706 / AJ811449 / 8W93-6700-AA) Precision rubber–steel composite resists thermal cycling & oil degradation Perfect fitment on 5.0L V8 & 3.0L V6 supercharged engines Sealed packaging prevents premature compound degradation Direct replacement—no modifications or adapters required Single or dual-pack options available Cost-effective preventative maintenance vs. engine rebuild 12-month manufacturer warranty on all units Tested for durability across temperature extremes Ships within 48 hours; delivery worldwide 5–12 days Compatibility Vehicle Model Engine Year Range Fit Range Rover Vogue 5.0L V8 SGDI 2010–2012 Direct Fit Discovery LR4 3.0L V6 DOHC GDI 2010–2016 Direct Fit Range Rover Sport 3.0L V6 DOHC GDI 2014+ Direct Fit Discovery 5 (New Discovery) 3.0L V6 DOHC GDI 2017+ Direct Fit Range Rover Velar 3.0L V6 DOHC GDI 2017–2022 Direct Fit Jaguar XJ 3.0L V6 2010–2019 Direct Fit Jaguar F-TYPE 3.0L V6 2014+ Direct Fit Jaguar XE 3.0L V6 & 5.0L V8 2015+ Direct Fit Jaguar XF 3.0L V6 2016+ Direct Fit Jaguar F-PACE 5.0L V8 2016+ Direct Fit Always verify your engine displacement and model year before ordering. If you're uncertain, contact our team with your VIN and we'll confirm fitment at no charge. Installation Notes Difficulty: Moderate | Time: 1.5–2 hours Disconnect the negative battery terminal to disable electrical systems and prevent accidental starter engagement. Remove the crankshaft pulley bolt using a socket wrench and breaker bar. You may need to lock the crankshaft using a wooden dowel or breaker bar wedged against the engine block. Withdraw the pulley and set aside carefully to avoid damaging the hub or tone ring. Pry out the old seal using a flat-head screwdriver or seal removal tool. Work slowly around the circumference to avoid scoring the crankshaft surface. Clean the seal bore thoroughly with a lint-free cloth. Inspect the crankshaft surface for nicks or corrosion; light scoring may be polished with fine emery cloth. Apply a thin film of engine oil to the outer diameter of the new seal and the crankshaft nose for easier installation. Press the new seal straight into the bore using a seal driver tool (typically available at tool rental counters). Drive it flush with the block face—do not over-strike. Reinstall the crankshaft pulley and torque the bolt to 89 ft-lb (120 Nm) following OEM specifications. Re-check torque after 5 minutes of running time. Reconnect the battery, start the engine, and run at idle for 10 minutes. Monitor the timing cover area for any seepage. Road test at moderate speeds to confirm normal operation. No oil should appear on the drive belt or timing cover after 30 minutes of running. ⚠ Important: If the crankshaft surface shows deep scoring, pitting or corrosion, the seal may not seat properly. Have the crankshaft nose machined or polished by a machine shop before installing a new seal. A poor seal surface is the leading cause of premature failure. Ready to Replace Your Seal? Stop oil seepage before it damages belts, pulleys and sensors. Our OEM-spec seals fit Range Rover, Discovery, Velar and Jaguar models perfectly—backed by a 12-month warranty and same-day dispatch. Shop Front Crankshaft Seals Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars – 12,300+ verified reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping – 5–12 days ✓ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket supplier and is not affiliated with, endorsed by or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, Discovery, Evoque or Jaguar. All product names, logos and brands are the property of their respective owners. Product descriptions and compatibility information are provided for reference only; always verify fitment with your vehicle's VIN before purchase.

```html Victorious · Multi-Fit · Engine Sealing Front Crankshaft Oil Seal – Range Rover, Discovery & Jaguar OEM-specification engine seal engineered to eliminate crankshaft leaks and restore compression across Land Rover and Jaguar powertrains. 5.0L V8 Petrol 3.0L V6 Petrol 2010–2022 OEM LR010706 / AJ811449 Direct Fit Vehicle Coverage This crankshaft oil seal is engineered to fit all major petrol powertrains across Land Rover and Jaguar's premium range. Whether you're running a 5.0L supercharged V8 in a Range Rover or a 3.0L turbocharged V6 in a Discovery or Jaguar saloon, this seal restores the factory compression barrier and eliminates oil seepage at the crankshaft nose. The crankshaft front seal is the critical interface between the engine block and the timing cover. Over time, thermal cycling, oil degradation, and minor wear can cause this seal to weep, leading to oil drips, reduced oil pressure, and potential engine damage if left unaddressed. This Partsmost OEM-specification seal meets the original equipment standard and installs in a matter of hours with basic hand tools. For owners experiencing oil seepage under the timing cover, rough idle, low oil pressure warnings, or any sign of crankshaft seal failure, this is the essential repair part. Backed by a 12-month manufacturer warranty and Victorious's 30-day money-back guarantee, this seal delivers peace of mind and long-term reliability. What's Included ⚙️ Front Crankshaft Oil Seal OEM-spec, new condition ✓ Single or Dual Option 1pc or 2pc package available 📋 OEM Documentation Part numbers & fitment specs included 🔒 12-Month Warranty Manufacturer defect coverage Key Features & Benefits OEM-specification material and dimensions—direct replacement for factory seals Engineered for extreme thermal loads—handles supercharged V8 and turbocharged V6 environments Eliminates crankshaft weep—stops oil drips at the source Restores compression barrier—improves oil pressure and engine health Direct fit—no machining, adapters, or fitment modifications required Stable performance—rated for 150k+ miles under normal use Easy installation—no special tools beyond basic hand kit Single or dual pack—buy one or repair both front and auxiliary seals Partsmost brand quality—trusted OEM-equivalent manufacturer 30-day money-back guarantee—backed by Victorious Automotive Compatibility Matrix Vehicle / Engine Year Range OEM Part Status Range Rover (5.0L V8) 2010–2012 LR010706 Direct Fit Discovery LR4 (3.0L V6) 2010–2022 LR010706 Direct Fit Range Rover Sport (3.0L V6) 2014–2022 LR010706 Direct Fit Discovery 5 (3.0L V6) 2017–2022 LR010706 Direct Fit Range Rover Velar (3.0L V6) 2017–2022 LR010706 Direct Fit Jaguar XJ (3.0L V6) 2010–2019 AJ811449 Direct Fit Jaguar XE (5.0L V8) 2015–2019 AJ811449 Direct Fit Jaguar XF (3.0L V6) 2016–2020 AJ811449 Direct Fit Jaguar F-TYPE (3.0L V6) 2014–2020 AJ811449 Direct Fit Jaguar F-PACE (5.0L V8) 2016–2021 AJ811449 Direct Fit Verify your OEM part number before ordering. Contact Victorious with your VIN or current seal part number to confirm fitment. Most Land Rover Discovery, Range Rover Sport, and Jaguar models 2010–2022 use LR010706 or AJ811449. Installation Guide Difficulty: Intermediate | Time: 2–3 Hours | Tools: Standard Hand Kit + Seal Removal Tool Safety first: Disconnect the negative battery terminal and allow the engine to cool for at least 2 hours. Drain oil: Remove the sump plug and drain engine oil into a waste container. Replace the drain plug and torque to spec. Remove timing cover: Unbolt the timing cover from the block. Inspect the old seal for debris or scoring. Extract old seal: Use a seal puller tool to carefully extract the failed seal without damaging the crankshaft nose or timing cover bore. Clean contact surfaces: Wipe the crankshaft nose and timing cover bore with a lint-free cloth and light penetrating oil. Remove any carbon buildup. Lubricate new seal: Apply a thin coat of clean engine oil to the inner lip of the new seal. Install new seal: Align the seal squarely on the crankshaft nose and tap gently with a seal installer until fully seated and flush with the block. Reinstall timing cover: Replace the timing cover gasket (recommend OEM), align the cover, and torque bolts in a cross pattern to specification. Refill oil: Add fresh engine oil to the recommended level. Start the engine and check for leaks around the timing cover for 5 minutes. Verify: Allow the engine to idle for 10 minutes, then check the oil level and top up if needed. Road-test to confirm smooth operation. Do not over-torque the seal installer. Excessive force can damage the seal lip and compromise the seal. Always consult the engine service manual for torque specifications on your specific model year. Ready to Stop the Drips? A crankshaft oil seal failure isn't just an annoyance—it's a warning sign that your engine's compression barrier is compromised. This OEM-specification seal restores that critical barrier and keeps your engine oil where it belongs: inside the sump. Shop Crankshaft Seal Now Use code 22GET20 for 20% off any 2 items ✓ 12-month warranty ✓ 30-day money back ✓ Worldwide DHL shipping ✓ 4.9/5 stars (12,300+ reviews) Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket OEM-equivalent part manufactured by Partsmost and is not an official Land Rover or Jaguar component. Fitment and compatibility are based on OEM part number cross-reference and are provided for reference only. Always verify compatibility with your vehicle's VIN before purchase. Victorious Automotive and Partsmost are not responsible for installation errors, incompatibilities, or damage resulting from incorrect fitment. Consult your vehicle service manual for proper installation procedures. ```

Victorious Automotive · Toyota Land Cruiser 250 · Exterior Lighting Front DRL & Turn Signal Lamps — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Dual-function LED daytime running and dynamic turn signal lamps engineered to transform the front fascia of the LC250 with precision-matched fitment and contemporary lighting character. LC250 Prado LC250 2024–2025 LED Technology ABS Construction White DRL Dynamic Amber Turn Signal Exterior Lighting Pair Included Overview The Toyota Land Cruiser 250 — also known as the Prado LC250 — represents the latest chapter in Toyota's legendary 4x4 lineage. Its bold, angular front end is designed to command attention both on and off road, and the factory lighting architecture leaves room for enthusiasts to take that visual presence further. These front DRL and turn signal lamps are built specifically for the 2024 and 2025 model year, slotting into the lower front bumper aperture with purposeful precision. Each lamp unit combines crisp white LED illumination for the daytime running function with a dynamic amber LED array for the turn signal, delivering a layered lighting effect that reads as immediately modern. The housing is formed from durable ABS polymer — resistant to road debris, temperature cycling and UV degradation — ensuring the lamps hold their shape and surface finish across years of daily use and expedition-level conditions. Whether you're building a refined urban spec or a purpose-prepared overland LC250, these DRL units add functional character without compromising the factory design language. The fitment requires a modification to the original front bumper to accommodate the lamp housings — a clean, professional result that looks as though it left the factory that way. What's Included 💡 Left DRL / Turn Signal Lamp Driver-side unit with white DRL and amber turn signal LEDs 💡 Right DRL / Turn Signal Lamp Passenger-side unit, matched pair for symmetrical installation 🔌 Wiring Connectors Pre-terminated leads for simplified integration 🔩 Mounting Hardware Fixings required for secure bumper installation Product Highlights Dedicated fitment for Toyota Land Cruiser 250 / Prado LC250 2024–2025 White LED array delivers clean, high-output daytime running illumination Dynamic amber LEDs provide clear, legally-compliant turn signal function Durable ABS housing resists impact, UV exposure and temperature extremes Supplied as a matched left and right pair for a symmetrical finish Modern LED technology draws lower current than halogen equivalents Adds aggressive, contemporary presence to the LC250 front end Pre-terminated wiring simplifies integration with factory loom Precision-moulded to replicate OEM tolerances for a flush, factory finish Dual-function design eliminates the need for separate DRL and indicator units Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (LC250) LC250 2024–2025 Direct Fit Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser 300 Series LC300 2021–2025 Not Compatible Toyota Land Cruiser Prado 150 LC150 2009–2023 Not Compatible Installation Notes Difficulty: Moderate  |  Estimated Time: 2–3 Hours  |  Professional Installation Recommended Safely elevate the front of the vehicle and remove the front bumper assembly by releasing all retaining clips and fasteners according to the Toyota LC250 workshop procedure. Using the supplied lamp housing as a template, carefully mark and cut the required apertures in the front bumper to accept each DRL / turn signal unit. Test-fit both lamp housings into the prepared openings, confirming flush seating and correct alignment on both sides before final fixing. Route the wiring harness from each lamp to the vehicle's front lighting loom, connecting the white DRL lead to the factory DRL circuit and the amber turn signal lead to the indicator circuit. Secure each lamp housing using the supplied mounting hardware, ensuring all fixings are torqued to prevent vibration movement. Refit the front bumper assembly, reconnect all factory connectors and test both DRL and turn signal functions fully before road use. ⚠ Important: This installation requires permanent modification to the original front bumper. This process cannot be reversed without bumper replacement. Professional installation by a qualified automotive technician is strongly recommended. Always verify local road regulations regarding aftermarket lighting before use on public roads. Upgrade Your LC250 Today Join over 12,300 satisfied customers who trust Victorious Automotive for precision-engineered exterior upgrades. Order today and receive worldwide tracked delivery via DHL, FedEx, UPS or TNT — backed by our 30-day money-back guarantee. Shop LC250 Exterior Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Cruiser, Prado or any associated brand. All vehicle names, model codes and trademarks referenced are used solely for the purpose of fitment identification. It is the customer's responsibility to verify compatibility with their specific vehicle specification prior to purchase and to ensure all installed products comply with applicable road traffic legislation in their region.

Victorious · Land Rover · Transmission Front Differential Bracket Insulator Kit – Range Rover & Discovery Factory-grade mounting insulators that eliminate transmission resonance and abnormal drivetrain noise in your Range Rover, Range Rover Sport, Discovery, or Defender. L460 / L405 / L494 / L461 2013–2026 Rubber & Metal OEM-Spec Fit Direct Bolt-On Overview If your Range Rover, Range Rover Sport, Discovery, or Defender has developed a concerning rumble or resonance from the front differential assembly, this is your solution. The front differential bracket insulator kit restores OEM isolation between the drivetrain and chassis, eliminating the metal-on-metal vibration that causes cabin noise and accelerates component wear. Land Rover specified this repair kit for a reason: over time, the rubber compounds in the original mounting insulators degrade under heat, fuel exposure, and constant flex. The result is a metallic clatter that worsens with load and acceleration. This complete insulator set—featuring LR087163, LR056077, LR056078, LR056079, and LR090577 components—restores the factory isolation geometry and noise suppression. Whether you're driving an L460 Range Rover Vogue, L461 Sport, Discovery 2017+, or Defender 2020+, a quiet, smooth drivetrain is non-negotiable. This kit delivers exactly that. What's Included 🔧 Front Metal & Rubber Washer LR087163 – primary mount isolation 🔧 Rear Upper Insulator LR056077 – metal & rubber assembly 🔧 Rear Lower Metal Mount LR056078 – structural support 🔧 Rear Lower Rubber Isolator LR056079 – vibration absorption 🔧 Round Girder Assembly LR090577 – load-bearing crossmember ✓ Fastener Hardware OEM-spec stainless bolts included Product Highlights OEM-equivalent material spec: premium rubber compound + steel construction Noise reduction: eliminates resonance-induced cabin clatter immediately Perfect fitment: engineered to original Land Rover tolerances Heat & fuel resistant: compound rated for high-temperature drivetrain environment Complete assembly: all five insulators + fasteners in one kit Easy installation: bolt-on design, no welding or modification required Stable, long-life performance: tested under load and thermal cycling Supports all 2013+ Vogue, Sport, Discovery, Defender models Restores original ride quality and cabin quietness 12-month warranty on all components Compatibility Vehicle Model Years Engine Options Fit Status Range Rover Vogue (L460) 2022–2026 3.0 PHEV, 3.0 P400, 4.4 PHEV Direct Fit Range Rover Vogue (L405) 2013–2021 3.0 V6 Diesel, 3.0 Petrol, 4.4 V8 Diesel Direct Fit Range Rover Sport (L461) 2022–2026 2.0 PHEV, 3.0 P400, 4.4 PHEV Direct Fit Range Rover Sport (L494) 2014–2021 2.0 AJ200, 3.0 Petrol, 3.0 Diesel Direct Fit Land Rover Discovery (L550) 2017–2026 2.0 Petrol, 3.0 Diesel, 3.0 PHEV Direct Fit Land Rover Defender (L663) 2020–2026 2.0 Petrol, 2.0 Diesel, 3.0 PHEV Direct Fit Range Rover Velar (L560) 2018–2022 2.0 Petrol, 2.0 Diesel, 3.0 Petrol Check VIN Range Rover Evoque (L551) 2019–2026 2.0 Petrol, 2.0 Diesel Not Compatible Not sure about your model? Email us your VIN and we'll confirm fitment within 2 hours. Call +44 203 943 9919 (Mon–Fri 9am–7pm GMT) for immediate assistance. Installation Difficulty: Intermediate · Time: 2.5–3.5 hours You'll need: Socket set (10, 12, 14mm), torque wrench, jack & stands, trim removal tools, thread-locking compound. Safely raise vehicle on jack stands. Remove wheels if needed for access to undercarriage fasteners. Locate the front differential assembly. Identify the five original insulator mounting points on the bracket and frame. Remove old insulators by unbolting M12 × 40mm and M10 × 26mm fasteners. Note the orientation and stacking order of each component. Clean all mounting surfaces with a wire brush. Remove any corrosion or debris from bolt holes. Install new insulators in reverse order: lower metal mount (LR056078), rubber isolator (LR056079), then rear upper assembly (LR056077). Install front metal/rubber washer (LR087163) and girder assembly (LR090577) according to the OEM diagram supplied. Apply thread-locking compound (Loctite 243) to all fastener threads before insertion. Torque M12 bolts to 78–85 Nm; torque M10 bolts to 45–50 Nm in a cross pattern. Check all fasteners have seated fully. Lower vehicle and test-drive at low speed to confirm noise elimination. ⚠ Important: Do not reuse original insulators—rubber degradation is progressive and reused parts will not restore proper isolation. Always replace the complete kit for optimal noise suppression and long-term reliability. Reclaim Your Quiet Cabin Stop tolerating that drivetrain rattle. This OEM-spec insulator kit is engineered to the exact same standard Land Rover uses on the production line—and backed by our 30-day money-back guarantee. Fit it yourself or have your dealer or Land Rover specialist handle it in under 4 hours. Either way, silence is one fastener away. Shop Front Differential Bracket Insulator Kit Use code 22GET20 for 20% off this kit plus any other Victorious accessory. ✓ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support – call +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, logos, and model designations are the property of their respective owners. This product is designed to be compatible with the vehicles listed; fitment and performance are the responsibility of the installer. Always verify VIN compatibility before purchase.

Jetour · Traveler T2 · Engine Exterior Front Engine Compartment Headlight Cover for JETOUR Traveler T2 OEM-fit protective engine cover shield designed to safeguard your Traveler T2's front compartment and headlight assembly from debris, road damage, and environmental wear. Jetour T2 2026+ ABS Plastic Engine Cover Direct Fit No Drilling Overview The JETOUR Traveler T2 is built for exploration and adventure, but your engine compartment and headlight areas deserve protection from the harsh realities of off-road travel, highway debris, and daily use. This front engine compartment cover is engineered as a direct-fit defensive shield specifically for the C-DM platform 2026+ Traveler T2. Manufactured from durable ABS plastic with precision molding, this cover integrates seamlessly with your vehicle's factory design while adding a layer of protective engineering. It guards critical components—cooling ducts, radiator surrounds, and headlight backing—against stone strikes, dirt accumulation, and thermal stress. Installation is straightforward with factory mounting points and no modifications required. Whether you're tackling rough terrain or simply want to extend the life of your engine bay, this cover is engineered to perform with zero compromise to airflow, cooling, or access for routine maintenance. What's Included 🛡️ Engine Cover Shield OEM-spec ABS plastic assembly ⚙️ Factory Fasteners Complete mounting hardware 📋 Installation Guide Step-by-step instructions ✅ Fitment Verification Pre-delivery quality check Key Features Direct-fit design for JETOUR Traveler T2 (2026+) Premium ABS plastic construction resists cracking and UV damage Protects engine bay, cooling ducts, and headlight assembly Factory mounting—no drilling, no permanent modifications Maintains full engine access for routine maintenance Engineered for optimal airflow and cooling performance Seamless integration with OEM exterior styling Lightweight yet rigid—adds minimal weight Withstands road debris, stone chips, and off-road terrain Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Year Range Platform Fit Status JETOUR Traveler T2 2026+ C-DM Direct Fit JETOUR Traveler T2 (Pre-2026) 2022–2025 Earlier Platform Not Compatible Other JETOUR Models All Years Various Not Compatible Unsure about fitment? Contact our expert team at +44 203 943 9919 (Mon–Fri, 9am–7pm). We'll verify compatibility for your specific vehicle configuration at no charge. Installation DIY Difficulty: Beginner | Time Required: 20–30 Minutes Park on a level surface and allow engine to cool completely. Locate the factory mounting brackets on the underside of the engine bay, adjacent to the radiator support frame. Align the cover shield with mounting points. All fastener holes should correspond with factory locations. Install supplied fasteners through the cover into the mounting points. Hand-tighten first for alignment, then secure firmly with a socket wrench. Verify all edges are seated flush and no gaps exist between the cover and engine bay perimeter. Test that the cover does not interfere with engine access, coolant cap access, or air intake pathways. Start the engine and monitor for abnormal vibration or rattling. If present, recheck fastener tightness. ⚠️ Important: Do not over-tighten fasteners—this can crack the plastic. Snug and secure is sufficient. If your 2026+ Traveler T2 has a non-standard interior or prior modifications, contact us before installation to confirm compatibility. Why Victorious? We source and validate every accessory for the vehicles we love. This cover has been engineered for real-world durability and tested against the demands of serious Traveler T2 owners. We stand behind it with our 30-day money-back guarantee and direct support from a team that knows Jetour inside out. Ready to Protect Your Engine Bay? Upgrade your JETOUR Traveler T2 with this precision-engineered front engine cover. Keep debris out, cooling in, and your engine compartment looking factory-fresh for years to come. Shop Now Use code 22GET20 to save 20% on any 2 items 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Jetour, SAIC Motor, or any official Jetour dealership or manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for aftermarket enhancement only and does not modify or replace original equipment manufacturer (OEM) components beyond cosmetic or protective purposes.

Victorious · Land Cruiser LC300 · Exterior Lighting LED Front Fog Lamp & Daytime Running Light Turn Signal for Toyota Land Cruiser 300 (LC300) Premium OEM-spec LED lighting with dynamic white DRL and amber turn signals for enhanced visibility and modern styling. LC300 2024+ LED + ABS Direct Fit Plug & Play Overview The Toyota Land Cruiser 300 (LC300) represents the pinnacle of capability and presence in global markets. Its iconic stance demands lighting that matches its commanding road presence. Stock fog lamps and daytime running lights often fall short of the visual impact this legendary platform deserves. This OEM-replacement front fog lamp assembly delivers dynamic LED illumination with integrated daytime running light and turn signal functions. Pure white light for daytime visibility pairs with vibrant amber turn signals, creating a cohesive and contemporary lighting signature. The streamlined lens design integrates seamlessly with the LC300's front fascia, giving your Land Cruiser the sharp, modern aesthetic it demands. Built from premium ABS material and high-efficiency LED lamp beads, these lamps are engineered for durability across climates and terrains. The assembly mounts directly in your existing OEM housings, eliminating the need for custom fabrication or invasive modifications. This is direct-fit simplicity that delivers measurable improvements in visibility and style. What's Included 💡 LED Front Fog Lamp Assembly Dynamic white + amber turn signal 🔌 Plug & Play Harness Direct OEM connector compatibility 📋 Installation Guide Step-by-step visual instructions ✓ 30-Day Guarantee Money-back assurance Product Highlights Dynamic white daytime running light for increased road visibility Integrated amber turn signal function—no separate harness needed Premium LED lamp beads for longevity and energy efficiency OEM-spec ABS housing matches factory fitment and finish Seamless integration with LC300 front bumper design Direct plug-and-play installation to existing connectors Weather-sealed lens prevents fogging and water ingress Enhanced clarity in low-light and adverse weather conditions Contemporary aesthetic elevates the overall truck presence Backed by Victorious Automotive 30-day money-back guarantee Compatibility Model Year Range Status Toyota Land Cruiser 300 2024–2026 Direct Fit Toyota Land Cruiser 300 2021–2023 Check Fitment Toyota Land Cruiser 250 All Years Not Compatible Other Toyota Models All Years Not Compatible Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT) if your model year isn't listed or you need fitment confirmation. Installation Difficulty: Moderate | Time: 45–60 minutes per side Disconnect the negative battery terminal and allow 10 minutes for the electrical system to discharge. Remove the front bumper fascia by unbolting the fasteners along the top and sides. Gently pull the assembly toward you and set aside on a clean surface. Locate the existing fog lamp housing and disconnect the OEM connector from the backside. Unbolt the old fog lamp assembly (typically 2–3 bolts) and carefully withdraw it from the bumper cavity. Position the new LED assembly into the housing, aligning the mounting points with the existing holes. Bolt the new lamp securely and reconnect the harness to the OEM connector. Verify the connection is fully seated. Test the light function (daytime running, turn signal, hazard) before reinstalling the bumper. Reinstall the bumper fascia, ensuring all fasteners are torqued evenly to avoid panel gaps. Reconnect the battery terminal and perform a final functional test. Safety Note: Professional installation is strongly recommended. Improper electrical connections can damage your vehicle's lighting circuit. If you're unfamiliar with automotive electrical work, consult a qualified technician or Land Rover specialist. Upgrade Your LC300's Lighting Today Transform your Land Cruiser's front end with LED technology that blends performance, safety, and style. Our direct-fit assembly replaces your factory fog lamps without custom modifications or additional wiring. View LC300 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars (12,300+ Reviews) 🚚 Worldwide DHL, FedEx, UPS, TNT Shipping 💰 30-Day Money-Back Guarantee 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with or endorsed by Toyota, Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All vehicle names and logos are trademarks of their respective owners. Product descriptions and compatibility information are provided for reference only. Always verify fitment with your vehicle's VIN or consult a certified technician before purchase.

Victorious · Toyota Land Cruiser LC300 · Exterior Front Fog Lamp Decoration Strip LC300 Refined aesthetics meets protective durability—premium finish upgrade designed exclusively for Land Cruiser LC300 (2021–2024). LC300 2021–2024 ABS Material Carbon Fiber / Electroplating / Black Fog Lamp Protection Adhesive Installation Overview The Toyota Land Cruiser LC300 commands respect on any terrain. Its aggressive front end deserves equally purposeful styling—and that's where this Front Fog Lamp Decoration Strip comes in. Engineered for direct fitment on 2021–2024 LC300 models, it elevates the fog lamp zone with contemporary finishes while simultaneously protecting the original paint and trim from stone chips and UV fade. Crafted from premium ABS material, this strip delivers the aesthetic impact of a professional bodyshop upgrade without the cost or downtime. Choose from three striking finishes: Carbon Fiber Pattern for modern edge, Electroplating for mirror-bright reflectivity, or classic Black for understated aggression. The car-specific adhesive system ensures a clean installation in under 30 minutes—no drilling, no splicing, no regrets. Built for owners who sweat the details. When every other Land Cruiser looks identical, this modest addition signals genuine attention to form and function. What's Included 📦 Front Fog Lamp Strip 1x Pre-cut, ready to install 🔗 Car-Specific Adhesive Factory-bonded for secure fitment 🧼 Prep Instructions Guidance for optimal surface adhesion Product Highlights Three premium finishes: Carbon Fiber, Electroplating, Black High-grade ABS construction for durability and UV resistance Protects original fog lamp area from stone chips and weathering Direct fit—no modifications or additional hardware required Car-specific adhesive system ensures lasting bond Installation under 30 minutes with simple hand application Seamlessly integrates with LC300 front fascia geometry Modern styling without compromising factory aesthetics Easy to clean and maintain with standard automotive detailing Backed by 30-day money-back guarantee Compatibility Model Year Range Fitment Toyota Land Cruiser LC300 2021, 2022, 2023, 2024 Direct Fit Land Cruiser LC250 All years Not Compatible Land Cruiser 200 Series All years Not Compatible Installation Notes Difficulty Level: Beginner Estimated Time: 20–30 minutes | Tools Required: None Clean the surface – Wipe the fog lamp trim area with rubbing alcohol and allow to dry completely for 5 minutes. This ensures optimal adhesive contact. Position the strip – Align the decoration strip with the fog lamp perimeter. Use a straight edge or masking tape as a guide if needed. Peel backing slowly – Begin at one end and gradually peel the adhesive backing while pressing the strip firmly into place. Apply pressure – Use your hand or a soft roller to apply even pressure along the entire length for 2–3 minutes. Allow cure time – Wait 24 hours before washing or heavy contact to ensure full adhesive set. Important: A clean, dry surface is critical to durability. Any dust, wax, or residue will compromise adhesion. If installation fails, gently heat the strip with a heat gun and re-clean before re-applying. Ready to Refine Your LC300? This fog lamp strip isn't just a cosmetic flourish—it's a statement that you care about every centimetre of your Land Cruiser. Protective. Purposeful. Premium. View Full LC300 Collection Apply discount code 22GET20 for 20% off when purchasing two or more items. ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 Support: +44 203 943 9919 Victorious Automotive is an independent specialist in premium vehicle accessories. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. Product fitment is based on OEM dimensions and third-party testing.

Toyota · Land Cruiser 250 (Prado LC250) · Exterior Styling Front Fog Lamp Decoration Trim – Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precision-moulded ABS fog light surrounds that sharpen the LC250's front end with a refined, purposeful finish — available in Silver, Black, and Carbon Fibre Pattern. LC250 Prado 2024–2025 ABS Material Paste Installation Silver / Black / Fibre Pattern Exterior Trim No Drilling Required Overview The Toyota Land Cruiser 250 — also known as the Prado LC250 — represents a significant generational leap for the nameplate. Launched for the 2024 model year, it blends rugged off-road credibility with a cleaner, more upmarket exterior design language. Enthusiasts who invest in this platform understand that the details matter, and the front end is one of the most visually impactful areas of the vehicle. These front fog lamp decoration trims are purpose-designed to slot precisely around the LC250's factory fog light housings, adding a defined surround that elevates the overall aesthetic of the bumper. Whether you choose the understated Silver, the stealth-focused Black, or the sporty Carbon Fibre Pattern finish, each option is engineered from high-grade ABS plastic to ensure a consistent surface quality and long-term resistance to UV fade and general wear. The adhesive paste installation method means there is no need for drilling, cutting, or professional fitting. The trims follow the exact contour of the OEM fog lamp recess, resulting in a factory-integrated look that appears as though it shipped directly from Toyota's production line. A small but considered upgrade that meaningfully improves the perceived grade of your LC250's exterior. What's Included 🔲 Fog Lamp Decoration Trims Pair (left & right), pre-cut to OEM dimensions 🔧 Adhesive Tape Pre-Applied Strong automotive-grade 3M-style tape backing 🧴 Surface Prep Wipe Alcohol cleaning pad included for adhesion prep 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Designed exclusively for the Toyota Land Cruiser 250 / Prado LC250 Fits 2024 and 2025 model year vehicles Three finish options: Silver, Black, Carbon Fibre Pattern High-grade ABS construction for durability and weight efficiency Accurate OEM-matched dimensions for seamless panel alignment No drilling, cutting, or specialist tools required Adhesive paste installation — reversible and clean UV-resistant surface finish to prevent fading over time Instantly elevates the perceived grade of the front bumper area Sold as a complete pair — left and right covers included Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 / Prado LC250 2024 – 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021 – 2025 Not Compatible Toyota Land Cruiser 200 LC200 2008 – 2021 Not Compatible Toyota Prado 150 Series J150 2009 – 2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Thoroughly clean the fog lamp surround area using the included alcohol prep wipe. Ensure the surface is completely dry before proceeding. Test-fit both trims dry (without removing the adhesive backing) to confirm alignment and orientation against the fog lamp housing. Starting with the driver's side, carefully peel back the adhesive tape liner and align the trim precisely to the fog lamp recess edge. Apply firm, even pressure across the full face of the trim for 30–60 seconds to activate the adhesive bond. Repeat the process for the passenger side trim, ensuring symmetry across both fog lamp surrounds. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the trims to heavy moisture. Note: For best adhesion results, install in ambient temperatures above 10°C (50°F). Avoid installation in direct sunlight or on a hot vehicle surface, as this may affect the initial tape bond. Do not apply to surfaces that have been recently waxed or treated with a ceramic coating without first removing the product layer in the application area. Upgrade Your LC250's Front End A small investment that makes a visible difference. These fog lamp trims are one of the easiest, most cost-effective ways to sharpen the LC250's exterior presence — no tools, no professional fitting, no compromises. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Trim Front Fog Lamp Decorative Trim in Silver — Range Rover Vogue L405 2018–2020 A precision-cut silver ABS trim surround that sharpens the front bumper aesthetic of the L405 Vogue — six pieces, zero modification, lasting finish. Range Rover Vogue L405 2018–2020 ABS Construction Silver Finish 6-Piece Set Adhesive Fit ISO9001 Certified Model: CY1279 Overview The Range Rover Vogue L405 in its 2018–2020 specification represents the pinnacle of the fourth-generation platform — a vehicle with sculpted lines, purposeful proportions, and a front end that commands attention. The fog lamp clusters sit prominently within the lower bumper, and for owners who want that area to carry the same considered detail as the rest of the vehicle, standard plastic surrounds simply don't do it justice. These Silver Front Fog Lamp Decorative Trims are engineered specifically for the L405 Vogue facelift. Each of the six pieces is formed from high-grade ABS — the same class of thermoplastic used throughout premium automotive trim manufacturing — finished in a clean, satin silver that integrates naturally with both the standard chrome pack and the contrast black styling options. The result is a front end that reads sharper, more resolved, and more intentional. Installation requires no tools, no drilling, and no permanent modification. Each trim is pre-cut to the exact contour of the fog lamp recess and secured via industrial-grade adhesive tape that bonds firmly to the painted bumper surface. Whether you're refreshing a daily driver or preparing a vehicle for resale, this is the kind of detail that makes the difference. What's Included 🔲 Silver Fog Lamp Trim Pieces 6 pieces — full set for both fog lamp clusters 🔧 Pre-Applied Adhesive Backing Industrial-grade tape pre-applied to each piece 📋 Installation Guidance Step-by-step fitment instructions included 📦 Protective Packaging Each piece individually wrapped for transit safety Product Highlights Custom-profiled for the L405 Vogue 2018–2020 fog lamp recess — no trimming or modification required High-grade ABS construction resists UV degradation, temperature cycling, and road vibration Satin silver finish complements chrome, gloss black, and contrast trim specifications 6-piece complete set covers both fog lamp surrounds in a single purchase Industrial adhesive backing provides a permanent, rattle-free bond to the bumper surface No drilling, no wiring, no professional fitting — clean DIY installation in under 30 minutes Adds a layer of surface protection to the fog lamp surround against minor stone chips ISO9001 certified manufacturing process ensures consistent quality across every unit Lightweight ABS adds negligible weight — no impact on bumper function or aerodynamics Reversible fitment — trims can be removed cleanly without damage to the original paintwork Compatibility Vehicle Code Year Range Fitment Range Rover Vogue L405 Facelift 2018–2020 Direct Fit Range Rover Vogue L405 Pre-Facelift 2013–2017 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If your vehicle is not listed or you are unsure of your build date, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔩 Tools Required: None Park your Range Rover Vogue on a flat surface and allow the front bumper to cool to ambient temperature if the vehicle has recently been driven. Thoroughly clean the fog lamp surround area with an isopropyl alcohol wipe or panel wipe solution. Remove all traces of wax, polish, grease, and road contamination. Allow to dry fully — at least 5 minutes. Dry-fit each trim piece to the fog lamp recess without removing the adhesive liner. Confirm the profile sits flush and the contours align correctly before committing. Starting with one side, peel back the adhesive liner from the first trim piece. Align carefully to the fog lamp surround, beginning at one edge and pressing progressively across the surface to avoid air pockets. Apply firm, even pressure across the entire face of each piece for 30–60 seconds to fully activate the adhesive bond. Repeat for all remaining pieces. Allow 24 hours before washing the vehicle to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation in temperatures below 10°C (50°F) — cold temperatures significantly reduce initial adhesive tack and can result in premature lifting. For best results, install indoors or in direct sunlight on a warm day. Upgrade Your L405 Vogue Today Browse the full Victorious range of exterior trim, styling, and protection accessories engineered for the Range Rover Vogue L405 — every piece chosen and tested by enthusiasts who own and drive these vehicles. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle build before purchase.

Victorious Automotive · Range Rover Vogue L460 · Exterior Styling Front Fog Light Carbon Style Inserts — Range Rover Vogue L460 2023–2024 Precision-fit ABS carbon-look surrounds that sharpen the front-end aesthetic of your L460 Vogue with zero modification required. Range Rover L460 2023–2024 Carbon Style Finish ABS Plastic Peel & Stick No Drilling OEM Fit Brand New Overview The Range Rover Vogue L460 is one of the most architecturally composed luxury SUVs on the road — its front fascia defined by clean horizontal lines and a commanding lower intake. It's a vehicle where details matter, and the fog light surrounds are among the first elements the eye is drawn to when approaching head-on. These carbon style front fog light inserts are designed specifically for the 2023 and 2024 L460 Vogue, slotting precisely into the existing fog light housing recess. Crafted from high-grade ABS plastic with a carbon fibre-effect finish, they introduce a sporting, technical character to the lower front end — contrasting handsomely against both factory body colours and darker painted bumpers alike. Whether you're refining a stock specification Vogue or complementing an existing exterior upgrade programme, these inserts deliver a genuinely premium result at a fraction of the cost of a body kit modification. No cutting, no drilling, no professional fitting required — just a clean surface, the included adhesive, and ten minutes of your time. What's Included 🔲 Carbon Style Fog Light Inserts Left & right pair, pre-cut to L460 spec 🔧 Pre-Applied Adhesive Tape 3M-grade backing for a secure, lasting bond 📦 Protective Packaging Boxed and padded for safe delivery Product Highlights Designed exclusively for the Range Rover Vogue L460 2023–2024 Carbon fibre-effect ABS finish — durable and UV-stable Direct OEM recess fitment — no trimming or modification needed Peel-and-stick installation in under 10 minutes Supplied as a matched left and right pair Does not obstruct fog light function or output Lightweight construction — no added road noise or vibration Arrives 100% new in original retail packaging Complements gloss black, satin black, and body-coloured bumpers Reversible fitment — can be removed without damage to paintwork Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L460 2023 – 2024 Direct Fit Range Rover Vogue L405 2013 – 2022 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Sport L494 2013 – 2022 Not Compatible Range Rover Velar L560 2018 – 2024 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Ensure the front bumper surface around the fog light recess is thoroughly clean, dry, and free of wax, polish, or grease. Use an isopropyl alcohol wipe for best adhesion. Test-fit both inserts dry (without removing the adhesive backing) to confirm alignment and orientation before committing. Starting with one side, peel back the adhesive film from the insert and carefully position it into the fog light recess, pressing from the centre outward to avoid air pockets. Apply firm, even pressure across the full surface of the insert for 30–60 seconds to activate the adhesive bond. Repeat for the opposite side. Allow 24 hours before washing or exposing to heavy rain for maximum bond strength. Note: For best long-term adhesion, avoid installation in temperatures below 10°C (50°F). Warming the bumper surface gently with a heat gun or warm cloth before fitting is recommended in cooler conditions. Complete the Look of Your L460 Explore the full Victorious range of styling accessories engineered specifically for the Range Rover Vogue L460 — from grille surrounds to mirror caps, side vents to interior trims. Shop Range Rover L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Jetour · T2 · Protection Front Gravel Baffle for Jetour Traveller T2 2023–2025 Premium ABS hood guard blocks gravel and stone damage—aggressive off-road styling with factory-perfect fitment. Jetour T2 2023–2025 ABS Engineering Stone Guard Off-Road Ready Overview The Jetour Traveller T2 is built for adventure, but your hood isn't. Gravel, sand, and road debris will chip paint and devalue your vehicle faster than you'd think. This front gravel baffle is engineered specifically for the T2 to intercept flying stones while projecting an authentically aggressive off-road aesthetic. Constructed from virgin ABS plastic—not recycled material—this guard delivers durability where it matters. Factory adhesive strips ensure permanent, residue-free installation in under 30 minutes. Choose between OE-textured baked black or modern matte black to match your T2's character. When adventure means unpaved roads, loose gravel, and construction zones, this baffle isn't a luxury—it's preventative maintenance. Protect your investment while saying exactly what your T2 is built to do. What's Included 🛡️ Gravel Baffle Pre-assembled, direct fit 🔲 Automotive Adhesive Tape Marine-grade 3M backing 📋 Installation Guide Step-by-step, illustrated 🧹 Prep Cloth Alcohol wipe included Product Highlights OE Fitment: Zero modification. Aligns perfectly with T2 contours. Aggressive Stance: Off-road aesthetic without compromise. ABS Engineering Grade: Virgin material resists UV, rain, and salt. Stone Deflection: Catch and scatter gravel before it hits paint. Smooth Edges: Rounded perimeter—won't damage paint or cut hands. Two Finishes: Baked black or matte black. Choose your vibe. Permanent Hold: Factory automotive adhesive. No bolts, no drilling. Removable: Clean removal leaves zero adhesive residue. Weather Proof: Odorless, UV-stable, immune to sun and salt spray. Quick Install: 20–30 minutes. No tools required. Compatibility Model / Year Status Jetour Traveller T2 (2023–2024) Direct Fit Jetour Traveller T2 (2025) Direct Fit Jetour T2 PRO / MAX Direct Fit Earlier Jetour models (T1, etc.) Not Compatible Not sure? Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) with your VIN or T2 build details. We'll confirm fitment in minutes. Installation Notes Installation Difficulty: Easy | Time: 20–30 minutes Clean the hood edge: Use the included alcohol wipe to remove dust, oil, and residue from the front hood mounting area. Allow to dry completely (2 minutes). Dry fit: Position the baffle on the hood edge. Align left and right symmetrically. Take a photo as reference. Peel and adhere: Starting at the center, peel the backing tape slowly and press downward with firm, even pressure for 30 seconds on each side. Cure time: Wait 24 hours before driving. The adhesive reaches full strength after 48 hours. Removal (future): Carefully lift one corner and peel the baffle away slowly. Residual adhesive can be rubbed off by hand or with a heat gun on low setting. ⚠️ Pre-Installation Prep: Hood must be clean, dry, and grease-free. Any dirt or moisture under the adhesive will cause premature lift. Do not apply in direct sunlight or temperatures below 5°C. Ready to Shield Your T2? Gravel and stone damage adds up fast. This baffle turns daily off-road exposure into preventative paint protection while amplifying your Jetour's aggressive character. Shop Front Gravel Baffle for T2 Save 20% on any 2 items. Use code: 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✅ 30-day money-back guarantee Disclaimer: Victorious Automotive is not affiliated with Jetour Auto, Chery Holdings, or their subsidiaries. All products are aftermarket accessories. Always verify compatibility with your vehicle documentation before purchase. Terms: 30-day refund applies to defective items only. Shipping and custom orders excluded. ```

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Protection Front Grill Anti-Mosquito Sand-Proof Stone Net – Toyota Land Cruiser 250 (LC250) 2024–2025 Purpose-engineered grille mesh protection that shields your LC250's radiator and water tank from insects, sand ingress, and stone strike — without compromising airflow or factory aesthetics. LC250 2024–2025 ABS + Stainless Steel Matte Black Bright Black Buckle Fit No Drilling Stone Protection Sand-Proof Anti-Mosquito Overview The Toyota Land Cruiser 250 is built to handle everything from urban commutes to demanding off-road terrain. With that capability comes exposure — dusty trails, insect-heavy environments, loose gravel, and fine sand that can work its way through the factory grille and accumulate around the radiator and water tank over time. Left unchecked, this debris reduces heat dissipation efficiency and can contribute to premature wear on cooling components. This Front Grill Anti-Mosquito Sand-Proof Stone Net is designed from the ground up to fit the LC250's grille profile precisely, acting as a fine barrier against insects, fine particulate, and small stone impact. The dual-material construction — rigid ABS framing combined with stainless steel mesh — ensures the net holds its shape under temperature cycling while the mesh itself resists corrosion from water, mud, and road chemicals. Crucially, this is not a visual compromise. The net sits flush within the grille architecture and does not obscure the Toyota badge. Airflow remains unrestricted for both daily driving and sustained off-road use where engine cooling is non-negotiable. Installation requires no drilling or modification — a clean, reversible buckle system means it can be removed just as easily as it's fitted. What's Included 🛡️ Front Grill Stone Net 1× full grille mesh unit, ABS + stainless steel construction 🔩 Mounting Hardware All buckle clips and fixings included for tool-free installation 📋 Installation Guide Step-by-step fitting reference included in packaging Product Highlights Precision-cut to match the LC250 front grille geometry exactly — no trimming required Stainless steel mesh core resists corrosion, rust, and chemical exposure from off-road environments ABS outer frame maintains rigidity across a wide temperature range without warping Fine mesh aperture blocks insects, sand particles, and small debris before they reach the radiator Engineered mesh density preserves optimal airflow — heat dissipation is not compromised Tool-free buckle installation — no drilling, no adhesive, no permanent modification Fully reversible — can be removed and refitted without any marks or damage Does not obstruct or reposition the factory Toyota badge Available in Matte Black and Bright Black to suit different trim specifications Suited to both daily driving and sustained off-road use in dusty or insect-dense conditions Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 / Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Land Cruiser Prado 150 J150 2009–2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Ensure the vehicle is parked on a level surface and the engine is cool before beginning work around the front grille area. Clean the front grille surface with a damp cloth to remove any dust, mud, or debris that could prevent a secure fit. Dry the grille thoroughly, paying attention to the inner mounting points where the buckle clips will seat. Position the stone net centrally against the grille, aligning it with the factory apertures and ensuring the Toyota badge is fully clear and unobstructed. Begin attaching the buckle clips from the centre outward, pressing each clip firmly until you feel it engage with a positive click. Work around all mounting points systematically, checking that the net sits flush and evenly without gaps or raised edges. Perform a final visual check from the front to confirm alignment, badge visibility, and overall fit quality before driving. ⚠ Note: Do not force buckle clips — if resistance is felt, recheck alignment before proceeding. For a full visual reference, contact our customer service team or request access to the product video guide. Some early production LC250 units may have minor grille tolerance variations; contact us before ordering if you are unsure. Complete Your LC250 Build Explore our full range of Toyota Land Cruiser LC250 exterior accessories — every product is selected for fit, finish, and genuine off-road durability. Shop LC250 Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product images are for illustrative purposes only — minor variations in shade or finish may occur between production batches. Always verify compatibility with your specific vehicle configuration before purchase.

BMW · X5 G05 · Exterior Trim Front Grille Decorative Trim Strips for BMW X5 G05 (2019) Premium ABS trim strips that elevate your X5's front-end presence with refined, factory-inspired detailing. G05 2019 ABS Plastic Shiny Silver 14-Piece Set Direct Fit Overview Your BMW X5 G05 is engineered for presence on the road. These front grille decorative trim strips are precision-engineered to complement the X5's aggressive front fascia, adding visual depth and a contemporary edge that enhances the vehicle's natural athleticism. Crafted from premium ABS plastic in shiny silver, each strip is individually molded to fit the exact contours of your grille opening. The result is seamless integration—no gaps, no misalignment—just cohesive design that looks factory-correct from every angle. Installation is straightforward with secure mechanical fastening. Unlike adhesive-only solutions, these strips lock into place and stay there, resisting vibration and road conditions. Included installation guide walks you through every step in under 30 minutes. What's Included ✦ 14x Grille Trim Strips Full front grille coverage, shiny silver finish ✦ Installation Hardware All fasteners and clips included ✦ Fitting Guide Step-by-step instruction manual ✦ Victorious Support 30-day money-back guarantee included Product Highlights Premium ABS plastic—rigid, UV-resistant, durable in all climates Shiny silver finish reflects light for premium visual impact Precision-molded for exact G05 fitment, no modifications needed Secure clip-and-fastener design prevents vibration and movement 14-piece configuration covers entire grille opening seamlessly Factory-grade appearance—indistinguishable from OEM styling Resists fading, cracking, and UV degradation over time DIY-friendly installation—no specialist tools required Enhanced aerodynamic visual definition at the front fascia Backed by 30-day money-back guarantee and 4.9★ customer reviews Compatibility Model Year Range Generation Fitment BMW X5 2019–Present G05 (Fifth Generation) Direct Fit BMW X5 (Pre-2019) 2014–2018 F15 (Fourth Generation) Not Compatible BMW X5M (G05) 2020–Present G05 M Performance Direct Fit Before purchase: Verify your X5 year and generation by checking your registration documents or VIN decoder. G05 chassis debuted in 2019. If uncertain, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment. Installation Difficulty: Beginner · Time: 25–30 Minutes Prepare your X5. Park in a well-lit area. Close all doors and ensure the engine is cool. No disconnection of battery or modules required. Remove protective film. Peel backing from each trim strip gently. Do not touch adhesive or clip surfaces with bare hands. Align first strip. Starting from the center of the grille opening, position the first strip horizontally. Press firmly for 5 seconds to set the clip. Install remaining strips. Work outward left and right from center. Ensure each strip aligns flush with adjacent pieces. No gaps should be visible. Secure all fasteners. Once all 14 strips are positioned, go back and tighten all mechanical fastener screws using the included tool. Do not over-tighten. Final inspection. Walk around your X5 and visually confirm all strips are level, flush, and aligned. Test by gently pressing each strip—no movement should occur. Cure time. Allow 24 hours before driving to allow adhesive full bond strength. Note: If strips are misaligned, do not force. Carefully peel back and reposition. Never install strips in temperatures below 10°C or above 35°C—adhesive performance is compromised outside this range. Complete Your X5 G05 Exterior These grille trim strips are the first step toward a fully refined front-end presence. Whether you're building a subtle aesthetic upgrade or preparing for further customization, this 14-piece set delivers factory-grade quality at a fraction of dealership costs. Shop Front Grille Trim Strips Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🚚 Worldwide Delivery via DHL, FedEx, UPS 💼 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Expert Support Victorious Automotive is an independent accessory specialist. We are not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or Jaguar Land Rover Limited. All product names, logos, and trademarks are the property of their respective holders. This product is designed to be compatible with BMW X5 G05 vehicles; fitment and performance are the responsibility of the installer.

Victorious Automotive · Range Rover Evoque L538 · Front Grille Front Replacement Grille – Range Rover Evoque L538 (2013–2018) A precision-fit ABS front grille designed specifically for the Range Rover Evoque L538, delivering a sharper, more assertive face with a free emblem included as standard. Evoque L538 2013–2018 ABS Construction Direct Fit Free Grille Emblem CCC Certified Racing Grille Style Worldwide Shipping Overview The Range Rover Evoque L538 occupies a distinctive space in the Land Rover lineup — compact enough for city driving, capable enough for light trail work, and consistently one of the most style-conscious vehicles in its class. Owners who choose the Evoque do so with an eye for design, and the front grille is one of the most visible elements that defines its character from the moment it comes into view. This replacement front grille is engineered specifically for the L538-generation Evoque produced between 2013 and 2018. Built from durable ABS plastic with a precision-moulded profile, it slots cleanly into the factory aperture without the need for cutting, drilling, or modification. The racing grille aesthetic gives the front end a more purposeful, performance-inspired appearance while maintaining the proportional balance the Evoque is known for. Every order includes a complimentary grille emblem, so you're not left hunting for the finishing touch once the fitment is complete. Whether you're refreshing a front end that's taken road damage or simply upgrading the factory look, this grille delivers a clean, confident result that's entirely at home on a premium-spec Evoque. What's Included 🔲 Front Grille Assembly ABS moulded, racing grille style, L538-specific profile 🔰 Grille Emblem Included free with every order — ready to fit 📦 Protective Packaging Secured for safe international transit via DHL / FedEx 📋 Fitment Guidance General installation reference included Product Highlights Designed exclusively for the Range Rover Evoque L538 (2013–2018) High-grade ABS plastic construction — lightweight and impact resistant Racing grille aesthetic for a more aggressive front-end stance Direct OEM aperture fit — no cutting or drilling required Complimentary grille emblem included with every order CCC certified for quality and safety assurance Dimensions: 100cm (L) × 40cm (W) × 17cm (H) — factory-matched sizing Shipping weight: 4kg — robust build without excess bulk Compatible with all trim levels across the 2013–2018 Evoque range Worldwide shipping via DHL, FedEx, UPS and TNT Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L538 2012 Direct Fit Range Rover Evoque L551 (2019–Present) 2019+ Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015+ Not Compatible Not sure about your exact model year or build spec? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tools, screwdrivers, fastener clips Ensure the vehicle is parked on a level surface with the ignition off. Open the bonnet and secure it safely before beginning work. Using a trim removal tool, carefully disengage the factory grille from its mounting clips along the top edge, working from the centre outward to avoid cracking the surround. Unclip the lower retaining tabs and any fasteners connecting the grille to the bumper assembly. Note the position of each fastener for reassembly reference. Gently disconnect any wiring harness attached to the factory badge or any ambient sensors situated within the grille opening, if applicable to your trim level. Remove the OEM grille assembly and set aside. Clean the mounting aperture before proceeding. Offer up the new grille to confirm alignment across all mounting points before committing to fitment. Seat the replacement grille firmly into the aperture, re-engaging all clips and fasteners in reverse order. Apply even pressure across the full width to ensure flush, rattle-free seating. Fit the included emblem centrally to the grille. Step back and check panel alignment before closing the bonnet. ⚠ Note: If your Evoque is equipped with front parking sensors or a front-mounted camera integrated into the grille surround, take care not to stress or disconnect any cabling during removal. If in doubt, consult a qualified automotive technician to complete the installation. Complete the Evoque L538 Look Browse the full Victorious range of Range Rover Evoque accessories — from exterior styling to interior protection — all selected and curated for the L538 generation. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious · Toyota Land Cruiser LC300 · Exterior Protection Front Grille Wire Mesh for Toyota Land Cruiser 300 Series Protect your LC300's engine bay from debris while maintaining factory aesthetics and airflow performance. LC300 2021–2024 Stainless Steel Hidden Design No Drilling Overview The Toyota Land Cruiser 300 Series is engineered for expedition-grade durability, but even the toughest vehicles deserve smart protection. Off-road and highway driving expose your engine bay to flying debris, insects, leaves, gravel, and road spray that degrade performance and aesthetics over time. This Front Grille Wire Mesh is precision-engineered for the LC300 GR, GR-S, and standard models (2021–2024). It installs invisibly behind the factory grille using cable ties, preventing unwanted material from entering the engine compartment, radiator core, and air intake system without altering the vehicle's iconic appearance or disrupting airflow. Built from marine-grade stainless steel with exceptional toughness and zero deformation risk, this mesh keeps your engine running cleaner, your air conditioning fresher, and your water tank protected—all while delivering the kind of understated protection serious Land Cruiser owners expect. What's Included ⚙️ Wire Mesh Panel Stainless steel, precision-cut for LC300 🔗 Installation Accessories Cable ties and mounting hardware 📋 Instruction Manual Step-by-step installation guide Product Highlights Prevents insects, leaves, gravel, and road debris from entering the engine bay Protects radiator core, condenser, and water tank from contamination Maintains air conditioning performance and eliminates odor buildup Ensures unobstructed engine heat dissipation and cooling airflow Marine-grade stainless steel with superior toughness and zero deformation Hidden installation design preserves factory LC300 appearance No drilling, welding, or grille removal required Quick cable-tie installation takes under 15 minutes Compatible with all GR, GR-S, and standard LC300 variants (2021–2024) Durable construction rated for extreme off-road and highway use Compatibility Model Year Variant Status Land Cruiser 300 2021–2024 Standard Direct Fit Land Cruiser 300 2021–2024 GR Direct Fit Land Cruiser 300 2021–2024 GR-S Direct Fit Land Cruiser 250 2024+ All Not Compatible Installation Easy Cable-Tie Installation Open the front grille panel or bumper trim (consult your LC300 manual for access points) Position the wire mesh panel behind the grille opening, centred and level Use the provided stainless steel cable ties to secure the mesh to the grille frame at 4–6 anchor points Trim excess cable tie length with a utility knife Verify mesh is secure and does not obstruct airflow or fan operation Close the grille panel and test cooling and air intake function ⚠️ Note: Verify your LC300 model year and variant before purchase. If you are unfamiliar with grille panel removal, consult a Toyota dealer or certified technician. The mesh should never contact rotating cooling fans. Ready to Protect Your LC300? Keep your engine bay clean, your cooling system efficient, and your Land Cruiser running like it was built to. Add this stainless steel grille mesh to your LC300 today. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 – 12,300+ Reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS ✅ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any official Toyota dealer. All product names, logos, and brands are the property of their respective owners. This product is designed to fit the vehicles listed and is sold as an aftermarket accessory only.

Victorious Automotive · Defender L663 · Exterior Protection Front Lamp Light Cover Guards for Land Rover Defender L663 (2020–2026) Precision-moulded polycarbonate headlight guards that shield your Defender's front lamps from trail debris, stone chips, and off-road grime — without compromising light output. Defender L663 2020–2026 Polycarbonate PC Direct Fit CE Certified High Transparency Heat Resistant Exterior Accessory Overview The Land Rover Defender L663 was built for genuine off-road capability — and if you're using yours the way it was intended, your headlights are constantly exposed to flying gravel, trail debris, mud, and high-pressure wash cycles. The factory lamp units on the L663 are a significant part of its signature face, and protecting them from chips, crazing, and surface damage is one of the easiest long-term investments you can make. These Front Lamp Light Cover Guards are precision injection-moulded from optically clear, high-temperature resistant polycarbonate — the same material class used in aircraft canopies and motorsport visors. The mould is developed directly from original OEM geometry, meaning the covers follow every contour of the L663's front lamp housing for a flush, factory-correct fit that looks intentional rather than aftermarket. Unlike generic lamp covers that dull your light output or create uneven beam projection, these guards maintain near-complete optical transparency. The PC material is also inherently antioxidant and UV-stabilised, so they won't yellow or haze over time even when subjected to sustained exposure to sunlight, heat, and harsh cleaning chemicals. Whether you're running the Defender on greenlanes, forest tracks, or simply want to preserve the condition of your daily driver, these covers do exactly what they promise. What's Included 💡 Front Lamp Cover Guards Full set — left and right lamp covers included 🔧 Fitting Hardware All necessary fixings for direct installation 📄 Installation Guide Step-by-step fitting reference included Product Highlights Precision injection-moulded from original OEM lamp geometry for a flush, exact fit High-transparency polycarbonate maintains full light output with no beam distortion High-temperature resistant PC material — stable under sustained engine bay heat Antioxidant and UV-stabilised construction prevents yellowing and hazing over time Protects factory lamp lenses from stone chips, trail debris, and surface crazing No drilling or modification required — direct clip or bracket fitment Factory-correct aesthetic — looks designed for the vehicle, not retrofitted CE certified — meets European product safety and material quality standards Resistant to high-pressure washing, mud, and off-road chemical exposure Preserves long-term resale value by keeping factory lamp units in pristine condition Compatibility Model Generation / Code Year Range Compatibility Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Defender (Classic / L316) L316 Pre-2016 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 minutes  ·  Tools Required: Trim removal tool (optional) Ensure the vehicle is parked on a level surface with the ignition off and the front lamps fully cooled before beginning fitment. Clean the front lamp lens housings thoroughly using a soft microfibre cloth and a mild automotive glass cleaner, removing all dust, grime, and moisture. Dry the lamp surfaces completely — any residual moisture beneath the cover can cause condensation or adhesion issues over time. Test-fit each cover against the corresponding lamp housing before final installation to confirm alignment and confirm no adjustment is needed. Following the included guide, locate the designated fixing points on the lamp housing surround and align the cover's mounting tabs or brackets accordingly. Secure each cover using the supplied hardware, applying even, gentle pressure to avoid cracking the polycarbonate. Do not overtighten. Perform a final visual check from a distance to confirm both covers are seated flush and symmetrically before driving. ⚠ Note: Confirm your specific Defender variant (90 / 110 / 130) and model year before fitting. These guards are designed exclusively for the L663 generation (2020 onwards) and are not compatible with the classic Defender L316 platform. If you are unsure of your vehicle's specification, contact us on +44 203 943 9919 before installation. Built for Defenders That Actually Get Used Browse the full range of Victorious Automotive exterior accessories for the Defender L663 — from body protection and trim upgrades to lighting and off-road specification parts. Explore the complete collection below. Shop Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Support: Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for compatibility identification purposes. CE certification applies to this product's material and safety standards as tested by the manufacturer.

Victorious · Defender 90/110/130 · Exterior Upgrades Front Lip Spoiler Front Bumper for Land Rover Defender 90 110 130 Aggressive front-end styling with factory-grade durability. Elevate your Defender's presence with premium bumper protection and integrated spoiler design. Defender 90 Defender 110 Defender 130 1990–2024 Polymeric Composite Direct Fit Rust-Proof Overview The Land Rover Defender is an icon—but its front end deserves to command attention. This Front Lip Spoiler and Bumper Kit brings genuine character to your 90, 110, or 130, combining protective engineering with aggressive aesthetics. Built for drivers who refuse to compromise on form or function. Our premium composite lip spoiler integrates seamlessly with your existing front bumper, adding depth, definition, and a lower centre of visual gravity. The integrated design adds genuine presence without requiring major modifications, and the engineered profile provides subtle aero benefits during highway cruising. Unlike generic plastic add-ons, this spoiler system uses multi-layer processing to resist UV fade, salt spray, and impact damage. Whether you're navigating urban streets or rough terrain, it stays looking factory-fresh for years. It's the signature upgrade that says you understand Defender culture. What's Included 🛡️ Front Lip Spoiler Integrated design, factory fitment 🔧 Installation Hardware Stainless fasteners included 📋 Fitting Guide Step-by-step instructions ✓ Victorious Warranty 30-day money-back guarantee Product Highlights Multi-layer composite construction resists cracking and impact damage UV-stabilised finish won't fade in direct sun or coastal salt environments Drop-in fitment—no cutting, drilling, or permanent modifications required Engineered aero profile improves front-end stability at motorway speeds Protects bumper paint from stone chips and minor scrapes Adds genuine 30–40mm of visual depth to front profile Works with factory bumpers on all Defender generations (1990–2024) Stainless steel fasteners prevent corrosion and rust streaking Maintains vehicle's factory appearance while adding attitude Tested in UK weather and off-road environments Compatibility Chart Model Year Range Body Type Status Defender 90 1990–2024 All Variants Direct Fit Defender 110 1990–2024 All Variants Direct Fit Defender 130 2007–2024 All Variants Direct Fit Range Rover Classic / P38 1970–2002 All Not Compatible Discovery 1–5 1989–2022 All Not Compatible Installation Notes Difficulty Level: Intermediate | Time: 45–90 minutes | Tools: Allen key set, socket set, trim removal tool Park on level ground and engage handbrake. Remove existing front bumper trim if fitted. Position spoiler against bumper face to verify alignment and fitment. Mark mounting hole positions lightly with pencil or tape. Drill pilot holes (if required by your Defender variant) using provided template. Insert mounting brackets and secure with supplied stainless steel bolts. Apply silicone sealant around bracket perimeter to prevent water ingress. Allow 24 hours curing time before vehicle use. Avoid carwash for 48 hours. Inspect all fasteners after 100 miles; re-torque if necessary. Important: This modification does not alter front bumper compliance or vehicle safety certification. If modifying an older Defender for MOT purposes, consult your test centre in advance. Factory paintwork may require touch-up around mounting points; use Defender-matched paint pen for best results. Make Your Defender Stand Out The front lip spoiler isn't just a cosmetic upgrade—it's a statement of intent. Engineered for durability, designed for impact, and built to last through countless adventures. This is how your Defender should look. Shop Defender Upgrades Get 20% off when you buy any 2 items. Use code 22GET20 at checkout. 4.9★ / 5 — 12,300+ verified reviews 30-Day money-back guarantee Worldwide DHL, FedEx, UPS shipping +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover plc, Jaguar Land Rover Limited, or their parent company. "Land Rover," "Defender," "Range Rover," and all associated logos are registered trademarks. Product descriptions and compatibility information are provided in good faith based on OEM specifications and customer feedback. Please verify fitment with your vehicle's build sheet before purchase. Modifications may affect warranty; consult your Land Rover dealer for details.

Victorious · Range Rover / Sport / Discovery · Suspension Front Lower Control Arm Bushing Kit OEM-grade replacement bushings engineered to restore suspension precision and eliminate unwanted steering play on modern Land Rover platform vehicles. L405 / L494 / L538 2013–2026 Rubber Composite Left & Right Pair Direct Fit Overview Control arm bushings are the silent heroes of suspension geometry. They allow precise articulation while damping vibration—but when they wear, the entire front end drifts. If your Range Rover or Range Rover Sport exhibits wandering steering feel, excessive play at parking speeds, or a springy, disconnected response through bumps, worn bushings are often the culprit. This OEM-equivalent bushing set restores factory stiffness and damping characteristics across the L405 Range Rover (2013+), L494 Range Rover Sport (2013+), and L538 Discovery (2017+) platforms. Manufactured to exacting durability standards with a 12-month warranty, these are the same specification bushings Land Rover engineers specified—without the dealership markup. Installation is straightforward for DIY suspension work or a quick job for any Land Rover-capable independent workshop. The kit includes both sides; most owners find the work manageable with basic hand tools and an afternoon of labour. What's Included 🔧 Front Lower Control Arm Bushings Left and right pair, OEM-equivalent specification 📋 Installation Guide Step-by-step removal and fitment instructions ✓ 12-Month Warranty Covers manufacturing defect and premature wear 📦 Secure Packaging Protective case ensures arrival without damage Product Highlights OEM-spec rubber-composite construction for factory handling feel Direct-fit design—no modification or adapters required Restores steering precision and eliminates play Reduces suspension noise and harshness Dual-hardness core for compliance and durability Includes left and right side bushings Compatible with ABS, air suspension, and standard geometry Cross-referenced to OEM part numbers LR084108, LR100072, LR148836 Suitable for stock and mildly modified suspension 50,000+ km proven track record across European markets Compatibility Vehicle & Year Range Fitment Range Rover Vogue L405 (2013–2020) Direct Fit Range Rover Vogue L460 (2022–2026) Not Compatible Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Sport L461 (2022–2026) Not Compatible Discovery Sport L538 (2017–2022) Direct Fit Discovery 5 L462 (2017–2026) Direct Fit Defender L663 (2020–2026) Not Compatible Always verify fitment against your vehicle's VIN before purchase. Contact us with your registration if unsure. Installation Notes Difficulty Level: Intermediate Requires basic hand tools, jack, and jack stands. Mechanical aptitude recommended. Allow 2–3 hours per side. Steps Raise vehicle safely on level ground; support with jack stands. Remove front wheel on service side. Unbolt and remove lower control arm from suspension frame and steering knuckle. Press or heat-extract old bushing from control arm using suitable tooling. Press new bushing into arm bore, ensuring square alignment. Reinstall control arm; torque all fasteners to Land Rover spec (typically 45–65 Nm for main pivot bolts). Repeat on opposite side. Lower vehicle and perform full suspension geometry check (4-wheel alignment recommended). Test drive at low speed; verify steering responsiveness and noise elimination. ⚠ Important: Suspension work affects steering geometry and safety. If unfamiliar with suspension work, have this completed by a qualified Land Rover technician. Improper installation may affect vehicle handling and increase accident risk. Ready to Restore Suspension Feel? Precision steering begins with eliminating play at the chassis pivot points. These OEM-spec bushings are engineered to restore the handling confidence that only a tight, responsive suspension delivers. Shop Control Arm Bushings Use code 22GET20 for 20% off any 2 suspension items. 4.9★ 12,300+ reviews ✓ 30-day money back ✓ Worldwide shipping 📞 +44 203 943 9919 Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All product names, logos, and trademarks referenced remain property of their respective owners. This product is an aftermarket replacement part and is not OEM equipment, though it is engineered to OEM specification.

Victorious Automotive · Range Rover · Front Grilles Front Mesh Grille for Range Rover 2018–2019 — Black & Silver ABS Upgrade A precision-engineered mesh front grille that refreshes the face of your 2018–2019 Range Rover with a sharper, more aggressive stance — without compromising fit or finish. Range Rover 2018–2019 Direct Fit ABS Construction Black & Silver Mesh Design No Drilling Required Racing Grille Style Exterior Styling Overview The 2018–2019 Range Rover is already one of the most commanding presences on the road — an icon of British engineering that blends luxury with genuine capability. But for owners who want their vehicle to reflect a more purposeful, contemporary aesthetic, the factory grille can feel understated. This mesh front grille replacement is designed specifically for those who want to sharpen the visual signature of their Range Rover without embarking on a full bodywork project. Manufactured from high-grade ABS polymer, this grille is built to withstand the rigours of daily use — resistant to UV degradation, minor road debris impact, and the thermal stress that comes with year-round driving. The black and silver mesh finish is clean and considered, sitting sympathetically alongside the existing chrome and body-coloured trim lines of the 2018–2019 model year rather than clashing with them. Fitment is designed to be a direct replacement for the original grille assembly, using existing mounting points for a seamless, rattle-free result. No specialist tools or modifications to the bumper structure are required. If you're comfortable with basic trim removal, this is a genuine weekend upgrade that transforms how your Range Rover looks at the kerb — and on the road. What's Included 🔲 Front Mesh Grille Pre-finished in black & silver, individually packed and ready to fit 📦 Protective Packaging Individually boxed to prevent transit damage 📋 Fitting Guidance General installation instructions included Note: Front badge / emblem is not included. Existing badge from your original grille can be transferred where compatible. Product Highlights Precision-engineered for a direct OEM-style fit on 2018 and 2019 Range Rover models High-grade ABS construction — lightweight, impact-resistant and UV stable Black and silver finish complements factory chrome and body trim lines Contemporary mesh pattern adds a sportier, more aggressive front-end character No drilling, cutting or permanent modifications required for installation Uses existing mounting points for a secure, vibration-free fitment Aerodynamically neutral design — no negative effect on cooling or airflow Easy to clean and maintain alongside standard exterior wash routines Shipped individually packed to arrive in showroom condition Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Year Range Trim / Variant Fitment Range Rover Vogue (L405) 2018–2019 SE, HSE, Autobiography, SVAutobiography Direct Fit Range Rover Vogue (L405) 2013–2017 All Variants Verify Before Purchase Range Rover Vogue (L405) 2020 All Variants Verify Before Purchase Range Rover Sport (L494) 2018–2019 All Variants Not Compatible Range Rover Velar 2018–2019 All Variants Not Compatible Range Rover Vogue (L460) 2022–2026 All Variants Not Compatible Defender (L663) 2020–2026 All Variants Not Compatible If your exact model year or build is not listed above, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. We're happy to confirm fitment. Installation Notes 🔧 Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tool, flathead screwdriver, clean cloth Ensure the vehicle is parked on a flat, stable surface with the engine off and cooled down. Open the bonnet for easier access to upper grille mounting points. Using a plastic trim removal tool, carefully unclip the factory grille from the front bumper assembly. Work from one edge inward to avoid cracking the surround — do not force any clips. Disconnect any wiring if applicable (e.g. sensors or camera harnesses routed behind the grille). Note the connector positions before removal. Remove any badges or emblems from the original grille that you wish to transfer. Set them aside in a safe location. Align the new mesh grille with the factory mounting points. Press firmly and evenly along each clip until you hear and feel it seat fully — check each point twice. Reattach any wiring connectors that were disconnected in Step 3. Ensure no cables are pinched or tensioned behind the grille. Refit any badges you wish to carry over. Step back and visually confirm panel alignment with the bumper and bonnet line before closing the bonnet. ⚠ Important: The front badge is not included with this grille. If your original badge uses adhesive backing, it may not transfer cleanly — have a suitable adhesive promoter available. If you are not confident with trim removal, we recommend having the grille fitted by a detailer or bodyshop to protect surrounding panels. Complete Your Range Rover's Look Thousands of Range Rover owners across the UK and worldwide trust Victorious Automotive to supply the parts that make a real difference — parts that fit properly, look the part, and last. Browse our full Range Rover Vogue collection for complementary exterior upgrades. Shop Range Rover Vogue Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styled accessories for Land Rover, Range Rover and Defender vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle build before purchase.

Victorious · Defender 1990 · Exterior Front Middle ABS Adventure Edition Style Grille for Land Rover Defender Aggressive Adventure Edition aesthetics with OEM fitment and premium ABS durability for 1990s Defenders. Defender 1990 ABS Material Honeycomb Design No Cutting Adventure Edition Direct Fit Overview The Land Rover Defender has always been defined by rugged simplicity and purposeful design. This Adventure Edition Style Front Middle Grille respects that heritage while injecting contemporary attitude into your 1990s Defender's front end. Whether you're a purist looking to refresh an ageing grille or seeking that modern-classic aesthetic, this piece delivers visual impact without compromise. Engineered from automotive-grade ABS plastic, this grille combines superior corrosion resistance with the structural rigidity needed for genuine off-road use. The repeating honeycomb mesh pattern isn't merely decorative—it optimises airflow into the engine bay whilst maintaining the aggressive stance that defines Adventure Edition styling. The finish arrives pre-painted, meaning no additional work required. Installation is genuinely straightforward. No cutting, no modifications, no guesswork. The grille mounts directly to your existing attachment points using standard hardware. With OEM-spec tolerances throughout, you'll notice zero panel gaps or misalignment. The detachable letter element adds versatility if you prefer a cleaner, unmarked appearance. What's Included 🎯 Front Middle Grille Adventure Edition style, pre-painted 🔤 Detachable Letter Element Remove for minimalist look ⚙️ Stainless Fasteners Corrosion-resistant hardware 📋 Installation Guide Step-by-step, no technical knowledge needed Product Highlights Automotive-grade ABS—superior toughness, rigidity, and corrosion resistance OEM fit and finish—zero modifications required, direct bolt-on installation Honeycomb mesh design—optimises engine bay airflow without obstruction Pre-painted Adventure Edition aesthetic—ready to install out of the box Detachable letter element—customise the front face to your preference No cutting or modification—fully reversible, completely stock-compatible Heavy-duty stainless fasteners—resist corrosion even in harsh environments Impact-resistant construction—proven durability in genuine off-road conditions Perfect replacement for aged or damaged factory grilles Backed by 30-day money-back guarantee and Victorious quality promise Compatibility Variant Year Range Fitment Land Rover Defender (Series / Classic) 1983–2006 Direct Fit Land Rover Defender 90 1983–2006 Direct Fit Land Rover Defender 110 1983–2006 Direct Fit Land Rover Defender 130 1983–2006 Direct Fit Defender L663 (2020+) 2020–Present Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Open bonnet and remove the existing factory grille by unbolting the 4–6 attachment points around the perimeter. Disconnect any wiring harnesses (if factory lights are integrated) and carefully lift out the old grille. Clean the mounting area with a dry cloth to remove dirt and debris. Position the new ABS grille and align mounting holes with existing attachment points. Insert stainless fasteners and tighten evenly in a cross pattern to avoid warping. Reconnect any wiring if applicable, and test fit for alignment and panel gaps. Close bonnet and inspect from multiple angles for even presentation. Note: If your original grille has integrated wiring for fog lights or daytime running lights, consult the factory loom before disconnecting. Standard fasteners (M6–M8 bolts) are typically reusable; replace only if corroded or damaged. Ready to Refresh Your Defender? Transform your 1990s Defender's front end with genuine Adventure Edition attitude. This grille combines purposeful design with premium materials—no compromise, no fuss. Shop Defender Grilles Use code 22GET20 for 20% off any 2 items. 4.9★ · 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All product names, logos, and brands referenced are the property of their respective owners. This product is designed for fitment with Land Rover vehicles but is not an OEM Land Rover product.

Victorious Automotive · Land Rover Discovery 5 · Front Grille Front Middle Abs Grille — Land Rover Discovery 5 (2017–2018) A precision-moulded ABS front centre grille panel designed specifically for the Discovery 5, delivering a refreshed, purposeful look with no compromises to fitment or finish. Discovery 5 L462 2017–2018 ABS Material Direct Fit Front Centre Grille CCC Certified SVSPS No Cutting Required Overview The Land Rover Discovery 5 occupies a unique space in the LR lineup — it's the vehicle that blends genuine family versatility with serious off-road credibility. Launched with a bold, contemporary face, the Discovery 5 rewards owners who take an interest in its presentation. The front grille is one of the most immediately visible elements of the vehicle, and the condition or style of that grille sets the tone for everything else. This front middle centre grille is manufactured from high-grade ABS (Acrylonitrile Butadiene Styrene), a material widely used in OEM and aftermarket automotive trim for its resilience to UV exposure, temperature cycling, and low-speed impact. Measuring 112cm wide, 40cm tall, and 12cm deep, this grille has been dimensioned specifically for the 2017 and 2018 model year Discovery 5, ensuring the fitment precision that Land Rover owners rightly expect. Whether you're replacing a damaged factory grille, refreshing worn trim, or simply upgrading the front-end aesthetic of your Discovery 5, this unit delivers a clean, factory-consistent result. At 5kg, it carries the reassuring solidity of a quality component without adding unnecessary bulk to the front end. What's Included 🔲 Front Centre Grille Panel ABS moulded, dimensioned for Discovery 5 2017–2018 🔩 Mounting Hardware Clips and fasteners for secure OE-style fitment 📄 Fitment Guide Basic installation reference included 📦 Protective Packaging Secured for safe international transit Product Highlights Precision-moulded ABS construction for long-term durability Exact fitment for Discovery 5 L462 2017 and 2018 model years CCC certified — independently externally tested Dimensions: 112cm × 40cm × 12cm for accurate fitment 5kg unit weight — solid without excess mass UV and temperature resistant ABS material Direct OE-position replacement — no cutting or modification Clean, factory-consistent finish straight from the box Compatible with standard Discovery 5 front bumper assembly Ships worldwide via DHL, FedEx, UPS, or TNT Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery 5 L462 2017 Direct Fit Land Rover Discovery 5 L462 2018 Direct Fit Land Rover Discovery 5 L462 2019–2024 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Installation Notes Difficulty: Moderate  |  Estimated Time: 45–90 Minutes  |  Tools Required: Trim removal tools, T20/T25 Torx set, panel clips Ensure the vehicle is parked on a flat surface with the engine off and fully cooled. Disconnect the battery as a precaution before working on front-end trim. Using a trim removal tool, carefully release the existing front grille assembly from the bumper surround. Work from the outer edges inward to avoid stressing the mounting tabs. Locate and remove all factory fasteners, clips, and any secondary fixings holding the centre grille section in place. Note their positions for reassembly. Lift out the existing centre grille panel. Inspect the surrounding bumper trim for any damage before fitting the new unit. Align the new ABS front centre grille into the bumper aperture. Begin seating the mounting tabs from the centre outward to ensure even tension across the panel. Re-secure all fasteners and clips until you feel each one click firmly into position. Do not over-torque any fixings. Step back and visually inspect the panel for even gaps and flush alignment before reconnecting the battery and carrying out a final check. ⚠ Note: This grille is designed for 2017–2018 Discovery 5 variants. If your vehicle was registered in a different model year or has undergone a facelift, please confirm the front bumper specification before fitting. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Discovery 5 Today Victorious Automotive supplies premium Land Rover accessories to owners who refuse to settle. With 12,300+ verified reviews and a 4.9/5 star rating, we're trusted by enthusiasts across the world to get it right. Shop All Discovery 5 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle codes are referenced solely for fitment compatibility purposes. All trademarks remain the property of their respective owners.

```html Victorious · Range Rover · Suspension & Steering Front CV Joint Boot Kit – Range Rover Evoque & Discovery Sport OEM-specification rubber CV boots with clamp rings. Restore axle joint integrity and prevent grease contamination. Evoque L538 / L551 Discovery Sport 2012–2019 Outer & Inner GKN OEM Rubber Overview Whether you own a Range Rover Evoque or Discovery Sport, the constant articulation and torque cycling of your front axles places tremendous demand on CV joint boots. Over time, these rubber seals degrade, crack, or tear—allowing grease to escape and moisture to enter. The result is accelerated joint wear, noise, and eventually costly replacement of the entire joint assembly. This front CV joint boot kit provides OEM-specification rubber boots and stainless steel clamp rings to restore your joint's protective seal. Choose outer boots (for the wheel-end joint), inner boots (for the transmission-end joint), or a combined kit. Each boot is manufactured to GKN LOEBRO specifications and carries original part numbers LR025065 / LR025066 (Land Rover) or equivalents GKN 36022 / 36178. Installation requires partial axle disassembly and joint removal, making professional fitting recommended. Once fitted, your CV joints will be protected from the elements, preserving articulation smoothness and extending joint life by years. What's Included 🔧 Front Outer Boot Kit Outer CV joint protective sleeve with dual clamp rings 🔧 Front Inner Boot Kit Inner joint transmission-side boot with clamp rings ⛓️ Stainless Steel Clamp Rings Corrosion-resistant, secure axle-to-boot retention 📋 Fitment Guide Cross-reference with OEM part numbers and vehicle VIN Note: Oil/grease packing is not included due to international shipping restrictions. Source separately if needed. Product Highlights OEM GKN LOEBRO 306200 / 306357 specification rubber Direct replacement LR025065 / LR025066 / LR124708 Fits both left and right side axles Choose outer, inner, or combined kits Stainless steel clamps resist corrosion Prevents grease loss and moisture ingress Extends CV joint component life significantly Restores smooth, rattle-free articulation Professional-grade durability and fit Cost-effective vs. full joint replacement Compatibility Vehicle Years Outer Boot Inner Boot Range Rover Evoque (L538) 2012–2018 ✓ Direct Fit ✓ Direct Fit Range Rover Evoque (L551) 2019+ ✓ Direct Fit ✓ Direct Fit Land Rover Discovery Sport 2015–2019 ✓ Direct Fit ✓ Direct Fit Jaguar (C2C22 platform models) 2015+ ✓ Compatible ✓ Compatible Ford & Volvo (C1 platform) Select models ✗ Verify fitment ✗ Verify fitment Always confirm part numbers against your vehicle's service records or consult our team at +44 203 943 9919 before ordering. Installation Notes Difficulty: Intermediate–Advanced | Time: 2–3 hours per side Safely lift and support the vehicle on jack stands. Remove the wheel. Unbolt and separate the brake calliper; secure out of the way with wire. Remove the ABS sensor connector and retaining bracket. Unbolt the lower suspension arm and hub assembly to gain axle access. Carefully separate the CV axle from both the differential and wheel hub. Clean the joint thoroughly and remove old boot material and clamps. Slide the new boot onto the shaft and position over the joint assembly. Fit and hand-tighten the stainless clamp rings; then torque evenly to prevent twisting. Reinstall the axle, hub, suspension arm, brake components, and wheel. Lower the vehicle and test-drive for smooth steering and no vibration. Warning: This job requires axle removal and suspension work. If you lack experience with suspension service, have a qualified Land Rover technician perform the installation. Improper clamp tension or boot positioning can result in premature failure. Ready to Restore Your CV Joints? Prevent catastrophic axle damage. Install OEM-specification CV boots before a joint failure forces expensive emergency repair. Keep your Evoque or Discovery Sport's steering responsive and reliable. Shop Front CV Boot Kits Use code 22GET20 for 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews 🚚 Worldwide DHL, FedEx, UPS shipping 💰 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Jaguar Land Rover (JLR), Jaguar Cars Limited, or any official Land Rover dealer or manufacturer. All product names, logos, and brands are the property of their respective owners. This product description is provided for compatibility and informational purposes only. ```

```html Victorious · Land Rover · Sensors Front & Rear ABS Wheel Speed Sensor Set – Range Rover Evoque & Discovery Sport OEM-quality anti-lock brake sensors engineered for precision diagnostics and fail-safe braking performance on modern Land Rovers. L538 / L551 2011–2022 Plug-and-Play ABS Diagnostics Direct Fit Overview The Range Rover Evoque (L538/L551) and Discovery Sport represent Land Rover's commitment to intelligent all-terrain capability. Their sophisticated anti-lock braking systems rely on precision wheel speed sensors mounted at each corner to monitor slip, optimize traction control, and maintain stability on any surface—from urban streets to rocky terrain. This complete sensor set provides OEM-spec replacement units for both front and rear axles. When your ABS warning light activates or brake diagnostics reveal sensor failure, worn sensing elements can no longer communicate wheel rotation data to your vehicle's brake controller. The result: reduced brake efficiency, disabled traction control, and potential loss of off-road stability. Our sensors feature the same electromagnetic sensing technology as original equipment, restoring full diagnostic capability and enabling dynamic braking intervention. Direct fit—no coding, no adaptation—with a one-year warranty and 30-day money-back guarantee. What's Included 🛢️ Front ABS Sensor (Single) LR024202 / LR071974 – Left or Right 🛢️ Rear ABS Sensor (Single) LR024208 / LR066868 / LR082224 – Left or Right 📋 Installation Guide Illustrated step-by-step procedures ✓ 1-Year Warranty Manufacturer defect coverage Product Highlights OEM-equivalent electromagnetic sensing element for reliable wheel speed detection 2-pin connector design matches factory wiring harness without adapters Tested across both petrol and diesel engine variants Restores full ABS and traction control function immediately after installation Precision-calibrated for Range Rover Evoque L538 & L551 architecture Compatible with Discovery Sport up to VIN threshold FH999999 No diagnostic coding or module reset required post-install Withstands extreme temperature range and moisture exposure Backed by Victorious 30-day money-back guarantee Fast, worldwide shipping via DHL, FedEx, UPS, or TNT Compatibility Matrix Vehicle Model Code Year Range Compatibility Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–2022 Direct Fit Discovery Sport L550 2015–2022 Direct Fit Discovery Sport (Post-22) L551+ 2023–Present Not Compatible Note: Verify your VIN or chassis number before purchase. Discovery Sport models beyond FH999999 threshold use updated sensor architecture and are not compatible with this set. Installation Notes ⚙️ Installation Summary Difficulty: Intermediate · Time: 45–90 minutes per axle · Tools: Socket set, torque wrench, wire crimper, ABS diagnostic scanner (recommended) Raise vehicle on a lift or secure jack stands. Remove wheel and brake components as needed to access sensor mounting bracket. Locate sensor wiring harness and carefully disconnect the 2-pin connector. Note wire polarity for reassembly. Remove mounting bolt (typically 13mm or 15mm socket) and slide sensor from bracket. Note spring tension on sensing coil. Clean sensor bore and bracket of corrosion or debris using a soft brush. Do not immerse sensor in water or solvents. Insert new sensor into bracket, align connector orientation, and reinstall mounting bolt to factory torque spec (typically 6–8 Nm for Land Rover). Reconnect 2-pin harness, ensuring positive and negative terminals match original configuration. Use supplied connector sheath or self-isolating tape. Repeat process for remaining sensors (front and rear, left and right as needed). Lower vehicle, clear any ABS fault codes using a Land Rover diagnostic tool (e.g., IDS or Pathfinder), and perform a test drive to verify ABS and traction control function. ⚠️ Important: Never force the sensor into the bracket. If resistance is felt, stop immediately and inspect for cross-threading or contamination. Improper installation may damage the sensing element. Why Victorious? We've equipped thousands of Range Rovers, Defenders, and Discovery owners across Europe, North America, and Asia–Pacific. Our sensors are tested for compatibility, backed by fast support (+44 203 943 9919, Mon–Fri 9am–7pm), and covered by a no-questions 30-day refund policy. Use code 22GET20 to save 20% when ordering 2 or more items. Ready to Restore Full ABS Diagnostics? Whether your Evoque or Discovery Sport is throwing an ABS warning or you're performing preventive maintenance, this OEM-spec sensor set restores precision braking control and traction stability in under 90 minutes. Shop Discovery Sport Sensors Shop Evoque Sensors Save an additional 20% on any 2 items with code: 22GET20 🌍 Worldwide Shipping DHL / FedEx / UPS ⭐ 4.9/5 Stars 12,300+ Verified Reviews 🔄 30-Day Money Back Guarantee 📞 UK Support Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. Product names and part numbers are used for reference and compatibility purposes only. All trademarks remain the property of their respective owners. This product is an aftermarket replacement sensor and may not carry the Land Rover brand. Warranty and guarantee terms apply to Victorious Automotive sales only. Always verify compatibility with your vehicle's VIN before purchase. ```

```html Victorious · Range Rover Velar · Brake Sensors Front & Rear ABS Wheel Speed Sensors – Range Rover Velar 2017–2020 & Jaguar F-Pace OEM-specification antilock brake system sensors with factory-matched 2-pin connectors for direct plug-and-play installation. L560 / L561 Velar 2017–2020 F-Pace Compatible ABS Sensor Direct Fit OEM Parts Overview The Range Rover Velar and Jaguar F-Pace rely on antilock brake system (ABS) sensors to maintain stability during emergency braking and off-road driving. These wheel speed sensors communicate wheel rotation directly to the ABS module, allowing real-time brake pressure adjustments to prevent lockup and loss of steering control. This sensor kit provides front and rear ABS wheels speed sensors with OEM-specification connectors and wiring harnesses, designed to meet the exact electrical and mechanical tolerances of your Velar or F-Pace. If your ABS warning light remains illuminated after brake pad and fluid checks, or if traction control behaves erratically, a faulty speed sensor is likely the cause. Installation is straightforward and requires no additional calibration—these sensors are plug-and-play direct replacements that restore full ABS and electronic stability control function immediately. What's Included 🔵 Front ABS Sensor 2-pin wired connector, OEM spec 🔵 Rear ABS Sensor 2-pin wired connector, OEM spec ⚡ Wiring Harness Factory connector terminals, full length 📋 Installation Guide Vehicle-specific routing and torque specs Product Highlights OEM part numbers LR090860, LR140695 (front) and LR090859, T4A2784 (rear) Factory 2-pin connectors match Velar and F-Pace wiring exactly Direct replacement—no adapters, splitters, or modifications required Stabilizes brake modulation on tarmac, loose gravel, and mud Restores electronic parking brake and traction control responsiveness Sealed against salt spray, dust, and water ingress 1-year warranty backed by manufacturer defect protection New, untested OEM-quality aftermarket sensors Front and rear sensors sold as a matched pair for balanced system performance Available for both petrol and diesel powertrains Compatibility Vehicle Model Year Position Status Range Rover Velar (L560) 2017–2020 Front Left, Front Right, Rear Left, Rear Right Direct Fit Jaguar F-Pace (First Gen) 2015–2021 Front Left, Front Right, Rear Left, Rear Right Direct Fit Range Rover Sport L494 2013–2020 Front and Rear Not Compatible Range Rover Vogue L405 2013–2020 Front and Rear Not Compatible Discovery Sport L550 2015–2024 Front and Rear Not Compatible Installation Notes Difficulty: Intermediate | Time: 45–60 minutes per axle Disconnect the negative battery terminal to disable the ABS module and avoid false diagnostic codes. Raise the vehicle on jack stands and remove the wheel to access the sensor assembly behind the brake rotor or brake drum. Locate the sensor bracket mounted to the steering knuckle (front) or axle housing (rear). Unplug the 2-pin connector from the factory sensor by pressing the release tab and pulling straight back. Remove the single 10mm bolt securing the sensor bracket to the suspension component. Install the new sensor into the bracket and torque the bolt to 10–12 Nm (7.4–8.8 ft-lb). Reconnect the 2-pin harness by inserting straight into the connector until it clicks—ensure no visible pins remain exposed. Reinstall the wheel and torque lug nuts to 130 Nm (96 ft-lb) in a star pattern. Reconnect the battery terminal and start the engine to clear any stored codes. Road test at low speed (30 km/h) with gentle braking to confirm ABS light is off and all stability systems respond normally. Warning: Do not reuse factory sensors or mixing old and new parts on the same axle. Always replace front and rear sensors as a complete set to maintain balanced wheel speed signal. Mismatched sensors can cause traction control to malfunction. Why Victorious Every ABS sensor we stock undergoes continuity and ohm resistance testing to confirm factory specification before shipment. We maintain direct relationships with UK and European suppliers, ensuring parts arrive with full traceability and 30-day money-back guarantee. Ready to Restore Your Braking System Stop second-guessing your ABS lights. Get OEM-spec sensors installed in 45 minutes and drive with the stability control your Velar or F-Pace was engineered to deliver. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back ✓ Worldwide DHL/FedEx ✓ 4.9★ (12,300+ Reviews) ✓ +44 203 943 9919 Victorious Automotive is an independent specialist retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, Defender, or any subsidiary thereof. All vehicle names, logos, and trademarks are the property of their respective owners. This product is manufactured to OEM specification and is compatible with vehicles listed above; it is not an original factory part. Installation performed at owner's risk. Always consult your vehicle's service manual before beginning work. ```