Products

Victorious · Tesla Model 3 · Interior Storage Tidying Seat Gap Storage Box & Center Console Organizer for Tesla Model 3 Keep essentials within reach. Premium ABS storage fits seamlessly into your Model 3's center console and armrest cavity. Model 3 2017–2018 ABS Plastic Adhesive Installation 43cm Length Overview The Tesla Model 3 is a driver's car—minimal, purposeful, and refined. But that minimalism can mean lost coins, keys, and small items. This Tidying Seat Gap Box fills that gap literally and functionally, sitting flush in your center console or armrest cavity where clutter naturally gathers. Engineered from durable ABS plastic and finished in matte black, this organizer tray blends seamlessly into any Model 3 interior. At 43cm long and just 10cm tall, it maximizes dead space without interfering with your driving experience or door operation. Installation is adhesive-backed and reversible—no drilling, no permanent modification. Whether you're storing sunglasses, parking receipts, charging cables, or the small items that migrate under seats, this storage solution transforms wasted cavity space into organized, accessible storage. ISO9001 certified manufacturing ensures consistent quality across every unit. What's Included 📦 Tidying Storage Box 43cm × 15cm × 10cm ABS tray with adhesive backing 🔧 Pre-Applied Adhesive Tape Automotive-grade mounting system; clean surface for best adhesion 📋 Installation Guide Step-by-step instructions for proper placement and surface prep Product Highlights Direct fit for Tesla Model 3 (2017–2018 model years) Durable ABS plastic construction with premium black finish Adhesive-backed installation—no tools or drilling required Fits center console, armrest, or seat gap cavity seamlessly 43cm length maximizes available storage without bulk Lightweight at just 100g—imperceptible weight addition ISO9001 quality certified manufacturing (Model LLK2380) Removable design—adhesive can be carefully peeled without damage Sleek matte black complements Model 3 minimalist aesthetic Keeps small items organized and within arm's reach while driving Compatibility & Fitment Tesla Model 3 Year Fitment Status 2017–2018 Direct Fit 2019–2024 (Redesigned) Not Compatible Model Y Not Compatible Model S / X Not Compatible Note: This storage box is engineered exclusively for 2017–2018 Tesla Model 3. Later generations and other Tesla models have different center console geometry and are not compatible. Please confirm your Model 3 year before purchase. Installation Guide Difficulty: Easy | Time: 5 minutes Clean the surface: Use a microfiber cloth and isopropyl alcohol to thoroughly clean the center console or armrest cavity where the box will sit. Allow 2–3 minutes for complete drying. Peel backing tape: Carefully remove the adhesive backing from the bottom of the storage box. Do this slowly to avoid tangling. Position precisely: Align the box in your chosen cavity (center console or armrest gap). Ensure it sits flush and level. Press firmly: Apply steady downward pressure across the entire length of the box for 30 seconds. Use your palm or a soft cloth to avoid fingerprints. Wait before use: Allow the adhesive to cure for 1 hour before placing items inside. Full adhesion develops over 24 hours. Important: Surface cleanliness is critical. Dust, debris, or residue will prevent proper adhesion and may cause the box to shift or fall during vehicle operation. Do not skip the cleaning step. Why Choose This Storage Solution Tesla Model 3 owners appreciate intentional design and functional minimalism. This storage box respects that philosophy—it doesn't add visual clutter or complexity, it simply reclaims dead space that would otherwise collect lint and lost items. The adhesive installation is reversible, so you can remove it cleanly if needed. And at under £20, it's a modest investment in keeping your cabin organized and your essentials accessible. Perfect for daily commuters, delivery drivers, or anyone who wants their Model 3's interior as organized as its software. Ready to Organize Your Model 3? Reclaim your center console. Keep coins, cards, and cables in one compact, accessible tray. 30-day money-back guarantee—no questions asked if you're not satisfied. Add to Cart Use code 22GET20 for 20% off when you buy 2+ items. 4.9★ 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS, TNT 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with Tesla, Inc., or any official Tesla entity. Tesla and Model 3 are registered trademarks of Tesla, Inc. Product compatibility is verified at time of listing but vehicle specifications vary by production date and region. Always confirm year and model before purchase. Improper installation may void vehicle warranty—consult your Tesla service centre if unsure. ```

Victorious · BMW · Interior LED Canbus LED Interior Dome & Map Light Bulb Kit – BMW X Series Premium error-free LEDs for your BMW X1, X3, X4, X5, X6. 50,000-hour lifespan, plug-and-play installation. X1 E84 | X3 E83 F25 | X4 F26 | X5 E53 E70 | X6 E71 E72 2000–2018 Canbus Error-Free Super Bright LED Plug & Play Overview Transform your BMW X Series interior with this comprehensive LED lighting upgrade. Whether you're driving a first-generation X5 E53, a modern X1 E84, or an X6 E71, this kit delivers consistent brightness, reliability, and that premium modern aesthetic your vehicle deserves. Every bulb in this kit is 100% Canbus error-free—no warning lights, no ECU errors, no guesswork. High-quality LEDs offer unbeatable brightness and a rated lifespan of 50,000 hours. Your dashboard, dome lights, map lights, vanity mirrors, trunk, glove box, door panels, and footwells all get the upgrade in one complete kit. Installation is straightforward: remove your old bulbs, drop in the new ones, and you're done. This is one of the smartest interior upgrades you can make—it costs less than a service, looks timeless, and sets your cabin apart. What's Included 💡 Dome & Map Lights Front & rear cabin illumination 🪞 Vanity Mirror Lights Sun visor–integrated bulbs 🚪 Door Panel Lights Ambient entry illumination 🔦 Trunk & Glove Box Utility storage lighting 👟 Footwell Lights Lower cabin ambiance 🔧 Installation Tool Safe bulb removal Kit sizes vary by model (14–22 bulbs total). Select your year/code below for the exact configuration. Product Highlights 100% Canbus Error-Free – No dashboard warning lights or ECU errors Super Bright Output – High-quality LEDs outshine OEM halogens 50,000-Hour Lifespan – Vastly outlasts factory bulbs Plug & Play – Direct fit into original sockets; no rewiring Perfect Heat Resistance – Engineered for automotive environments Low Power Draw – Reduces strain on your electrical system Professional Appearance – Modern white/cool tone throughout Complete Coverage – Dome, map, door, footwell, vanity, trunk, glove box Easy Installation – Takes 30–45 minutes; no technical skill needed Affordable Upgrade – Entire cabin in one affordable kit Compatibility by Model BMW Model Year Range Bulb Count Status X1 E84 2009–2015 14 PCS Direct Fit X3 E83 2004–2010 15 PCS Direct Fit X3 F25 2011–2017 22 PCS Direct Fit X4 F26 2014–2018 17 PCS Direct Fit X5 E53 2000–2006 21 PCS Direct Fit X5 E70 2007–2013 22 PCS Direct Fit X6 E71 / E72 2008–2014 21 PCS Direct Fit Installation Guide Difficulty: Beginner | Time: 30–45 minutes Turn off all interior lights and allow bulbs to cool for 5 minutes before handling. Remove the old bulb by gently twisting counterclockwise or pulling straight out (design varies by location). Be careful—old bulbs may be hot. Insert the new LED bulb into the empty socket, twisting clockwise or pushing firmly until seated. Adjust the metal pin clips closer around the festoon if the bulb feels loose; this ensures a tight, secure fit. Test all lights (dome, map, door, trunk, vanity, footwell) to confirm proper function. Repeat for all bulb locations included in your kit (count varies by model). Install the tool in your glovebox for future reference or maintenance. ⚠ Safety Note: Do not touch bulbs with bare skin; oils can damage the LED. Wear cotton gloves or use the supplied tool. If you experience any warning lights on your dashboard after installation, verify that all bulbs are fully seated in their sockets. Upgrade Your BMW Interior Today A brighter, more modern cabin is just a few minutes and one kit away. Error-free Canbus technology means zero headaches—just clean, bright light everywhere you need it. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 4.9★ 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide DHL/FedEx/UPS Shipping ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessories specialist. We are not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke, or any official BMW dealer. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is designed to be compatible with the listed BMW models and is sold as an aftermarket accessory.

Victorious Automotive · Defender L663 · Exterior Protection TPU Protective Film for Side Window Centre Pillar & B–C Pillars — Land Rover Defender 110 (2020–2021) Precision-cut TPU film engineered to guard the Defender 110's most exposed pillar surfaces against trail debris, stone chips, and daily abrasion — with zero visual intrusion. Defender L663 2020–2021 TPU Film B-Pillar C-Pillar Centre Pillar Scratch Protection Self-Healing Direct Fit ISO9001 Certified Overview The Land Rover Defender 110 L663 was built to venture far beyond paved roads, and that adventurous DNA means its exterior surfaces face relentless punishment. The B and C pillars, along with the side window centre pillar, sit in prime positions to catch stone chips, branch strikes, and grit blast from the tyres — areas that are costly and time-consuming to repair once the factory finish is compromised. This TPU Protective Film is precision-cut to match the exact contours of the Defender 110's pillar geometry, providing an invisible yet highly durable barrier between your paintwork and the trail. Made from premium thermoplastic polyurethane, the film absorbs impacts that would otherwise etch, chip, or scratch through to bare metal — all while maintaining the clean, factory appearance your Defender deserves. Unlike aftermarket wraps or bulky trim overlays, this film sits flush and virtually invisible once applied. It works quietly in the background, preserving resale value and keeping your Defender looking factory-fresh whether it's crossing a green lane in Wales or sitting on a city kerb. For Defender owners who demand both performance and presentation, this is the kind of detail that makes a real difference. What's Included 🛡️ TPU Centre Pillar Film Pre-cut for side window centre pillar — direct fit 🔲 B-Pillar Film Piece Precisely shaped to cover the B-pillar surface 🔳 C-Pillar Film Piece Contoured profile for complete C-pillar coverage 📋 Installation Guide Step-by-step instructions included in the box Product Highlights Premium TPU material resists tears, abrasion, and UV degradation over time Transparent finish maintains the original factory paint colour and sheen Custom-cut profile designed specifically for the Defender 110 L663 pillars Pressure-sensitive adhesive bonds securely without damaging paintwork Residue-free removal — repositionable during installation before final set Guards against stone chips, trail debris, and low-speed branch strikes Self-healing TPU surface minimises the appearance of light surface scuffs ISO9001 certified manufacturing for consistent quality and dimensional accuracy Hydrophobic surface repels water and makes cleaning easier after off-road use Protects resale value by preserving original paintwork in high-wear areas Compatibility Vehicle Code Year Range Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Land Rover Defender 110 L663 2022–2026 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 DIY Friendly · Estimated Time: 30–45 Minutes · No Tools Required Thoroughly clean all target pillar surfaces with an alcohol-based prep solution. Remove any wax, polish, or silicone residue from the panel before beginning. Ensure the vehicle is parked in a sheltered, dust-free environment at room temperature. Avoid applying in direct sunlight or below 10°C. Lightly mist the pillar surface and the adhesive side of the film with soapy water — this allows for repositioning during initial placement. Align each film piece carefully from the top edge, working slowly downward and smoothing outward from the centre to eliminate air bubbles. Use a soft squeegee or credit card wrapped in microfibre cloth to press the film flat and expel any remaining moisture from beneath the film. Allow 24–48 hours for the adhesive to fully cure before exposing the vehicle to rain, washing, or off-road conditions. ⚠ Important: Do not apply over cracked, chipped, or previously repaired paintwork. Ensure the surface is completely dry and free from contamination before application. Attempting to apply in cold or humid conditions may reduce adhesion performance. Built for Defenders That Actually Get Used Browse the full range of exterior protection and accessories for your Defender 110 L663 at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited or any of its subsidiaries. All vehicle model names, codes, and trademarks remain the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Range Rover · Screen Protection TPU Screen Protector for Range Rover Vogue L405, Sport L494 & Velar (2017–2020) Precision-cut, optically clear TPU film engineered to shield your Range Rover's infotainment and driver display screens from daily scratches, smudges, and surface wear — without affecting touch sensitivity. L405 Vogue L494 Sport Velar 2017–2020 TPU HD Film Scratch Resistant Self-Healing Bubble-Free Direct Fit Overview The Range Rover Vogue L405, Sport L494, and Velar represent the pinnacle of British luxury motoring — and their large-format touchscreen interfaces are central to that experience. From the dual-screen InControl Touch Pro system on the Vogue and Sport to the beautifully integrated dual-pane display of the Velar, these screens are as much a design statement as they are a functional tool. Keeping them in immaculate condition matters. This TPU screen protector has been precision-cut to fit each compatible model's display geometry exactly — no trimming, no guesswork. Manufactured from high-grade thermoplastic polyurethane, the film absorbs micro-abrasions from daily contact, resists fingerprint adhesion, and maintains full HD optical clarity so your screen looks exactly as it did the day you drove off the forecourt. Unlike tempered glass alternatives, TPU film is flexible enough to conform to slightly curved display surfaces common on these generations, and its self-healing properties mean minor surface scuffs gradually disappear on their own. It's the kind of protection that works quietly in the background — exactly how it should be in a vehicle of this calibre. What's Included 🛡️ TPU Protection Film 1x precision-cut screen protector for your compatible model 🧴 Cleaning Wipe Pre-installation screen prep cloth included 🃏 Application Card Smooth-edge squeegee for bubble-free application 📋 Installation Guide Step-by-step instructions for a clean, accurate fit Product Highlights Precision-cut to match your model's exact screen dimensions High-grade TPU HD material with superior optical clarity Self-healing surface — minor scratches disappear over time Full touch sensitivity maintained — no dead zones or lag Anti-fingerprint and smudge-resistant coating Bubble-free adhesive for a seamless, clean installation Protects against everyday scratches, keys, and debris Flexible film conforms to lightly curved display surfaces Residue-free removal — no damage to OEM screen surface Reduces glare and reflections for improved screen visibility Compatibility Model Code Year Range Fit Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Vogue L405 2013–2017 Verify Screen Gen Range Rover Sport L494 2013–2017 Verify Screen Gen Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure which generation your vehicle is? Check your V5C registration document or contact us at +44 203 943 9919 Mon–Fri 9am–7pm. Installation Notes ⏱ Estimated Time: 15–25 minutes  ·  Difficulty: Easy Power off your vehicle's infotainment system and allow the screen to cool to room temperature before beginning. Use the included dry cloth to remove all dust, fingerprints, and debris from the screen surface. For best results, work in a low-dust indoor environment. Peel back a small section of the TPU film's backing layer and align the film carefully to the screen edges using the cut-outs and corners as reference points. Slowly peel and lay the film across the screen, using the application card to push out any air bubbles from the centre outward in smooth, firm strokes. Remove the top protective layer once the film is fully applied. Allow 24 hours for the adhesive to fully cure before extended use. ⚠ Important: Ensure your screen surface is completely clean and dry before application. Any dust or moisture trapped beneath the film may affect adhesion. If you are unsure, professional installation is recommended for a flawless result. Protect What Matters Your Range Rover's interior is built to last — and with the right protection, its screens will stay looking factory-fresh for years to come. Shop with confidence, backed by our 30-day money-back guarantee and 4.9-star rated service. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only. Always verify fitment with your specific vehicle before purchasing.

Victorious Automotive · Land Rover & Jaguar · Key Protection TPU Stellar Sands Key Case Cover — Land Rover & Jaguar Fob Protection with Swarovski-Style Crystal Finish Wrap your Land Rover or Jaguar key fob in a durable, crystal-embellished TPU shell that prevents peeling, cracking, and everyday wear — in three premium colour options. Range Rover Sport Range Rover Evoque Freelander 2 Jaguar XE / XJ / XF TPU Material Crystal Swarovski-Style Back Black · Pink · Silver Direct Slip-On Fit 30-Day Guarantee Overview Land Rover and Jaguar key fobs are precision-engineered pieces of technology — but their OEM plastic housings are notorious for peeling, splitting, and scuffing with regular use. Whether it's a Range Rover Sport, Range Rover Evoque, Freelander 2, or a Jaguar XE, XJ, XJL, or XF, the exposed plastic casing is one of the first things to show its age, often leaving a cracked or delaminated fob that feels far from premium in your hand. The Victorious TPU Stellar Sands Key Case solves this problem elegantly. Constructed from flexible, shock-absorbing thermoplastic polyurethane, this slim-fit cover wraps your existing fob securely, protecting the shell and the electronics within from drops, spills, pocket debris, and daily wear. The Swarovski-style crystal-embellished back panel adds a distinctive, jewel-like finish that elevates the fob's appearance considerably — available in Black, Pink, and Silver to complement your interior aesthetic or personal style. Unlike hard plastic cases that can trap grit and cause further damage, TPU flexes slightly to absorb impact without adding unwanted bulk. All buttons remain fully accessible through precision-cut openings, and the signal range of your remote is completely unaffected. This is the understated upgrade that every Land Rover and Jaguar key deserves. What's Included 🔑 TPU Key Case Cover 1× slip-on protective shell in your chosen colour 💎 Crystal Embellishment Swarovski-style stones pre-applied to rear panel 📦 Protective Packaging Safely packaged for transit and gifting 📋 Fitment Guide Compatible model reference included Product Highlights Flexible TPU construction absorbs drops and daily impacts without cracking Swarovski-style crystal back for a premium, jewel-finished aesthetic Available in Black, Pink, and Silver to suit any preference Precision-cut openings keep all buttons fully functional Slim profile adds minimal bulk while maximising protection Prevents the common OEM plastic peeling and splitting issue Protects internal key electronics from moisture and impact Secure slip-on fit — no adhesive, no permanent modification Compatible across multiple Land Rover and Jaguar fob shapes Fully reversible — remove anytime without leaving any residue Compatibility Vehicle Model / Code Years Fitment Range Rover Sport L320 / L494 2005–2020 Direct Fit Range Rover Evoque L538 2011–2019 Direct Fit Freelander 2 L359 2006–2015 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Jaguar XE X760 2015–2020 Direct Fit Jaguar XJ / XJL X351 2010–2019 Direct Fit Jaguar XF X260 2015–2020 Direct Fit Jaguar C-X16 Concept / Reference — Direct Fit Range Rover Sport L461 New Generation 2022–2026 Verify Fob Shape Range Rover Vogue L460 New Generation 2022–2026 Verify Fob Shape Defender L663 New Generation 2020–2026 Verify Fob Shape Installation Notes Difficulty: Easy  ·  Time: Under 2 Minutes  ·  Tools Required: None Remove your existing key fob from any key ring or lanyard to ensure a clean, unobstructed fit. Hold the TPU case open and align the base of your fob with the bottom edge of the cover, matching the button cutouts to the corresponding controls. Gently press the fob into the case, working from the base upward until the TPU shell seats flush around the entire perimeter. Confirm all buttons depress naturally through their designated openings and the emergency blade slot (if applicable) is correctly aligned. Reattach to your key ring through the designated loop and you're done. Note: Please compare your existing fob shape against the product images before purchasing. Land Rover and Jaguar fob profiles can vary between model years and facelifts. If you are unsure of compatibility, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Protect Your Key. Elevate Every Detail. Your Land Rover or Jaguar deserves care at every touchpoint — including the key in your hand. Browse our full range of premium accessories at Victorious Automotive and keep your vehicle looking and feeling exactly as it should. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Land Rover, Range Rover, Jaguar, or any of their subsidiaries. All brand names, model names, and vehicle references are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover L405 · Interior Protection Transparent Interior Protection Film — Range Rover L405 LWB 2018 A precisely cut, virtually invisible TPU film that shields your 2018 Range Rover's most-touched interior surfaces from daily wear, scratches, and scuffs — without compromising the factory finish. Range Rover L405 LWB 2018 TPU Film Self-Healing Transparent Interior Protection Direct Fit No Residue Overview The 2018 Range Rover L405 Long Wheelbase is a vehicle built to the highest standard — a cabin defined by refined surfaces, tactile controls, and premium detailing that rewards those who appreciate the finer points of automotive design. Every switch, trim panel, and door handle has been considered. Keeping them in that condition, day after day, is where this film comes in. This transparent interior protection film is custom-cut to fit the specific contours of the 2018 Range Rover L405 LWB, covering the highest-contact zones: centre console, gear surround, air panel, door handles, knobs, gear panel, door interior trim, and air outlets. The ultra-clear TPU construction remains virtually invisible once applied, preserving the factory appearance while providing a robust barrier against fingernail marks, ring scratches, and general handling wear. Unlike generic cut-to-fit films, this kit is precision-engineered for your exact model year and body configuration. The self-healing TPU layer absorbs minor surface abrasions over time, recovering its clarity with gentle heat. No adhesive residue. No lifted edges. No compromise to the interior you've invested in. What's Included 🎛️ Centre Console Film Covers the full centre console surface ⚙️ Gear Surround Film Precision cut for the gear selector area 💨 Air Panel Film Protects climate control and vent trim 🧩 Suite Kit Film Full suite trim panel coverage 🔘 Knob Protection Film Fits rotary and push-type knob surrounds 🚪 Door Handle Film Shields interior door pull handles 📐 Gear Panel Film Covers the gear panel trim surround 🛡️ Door Interior Film Protects door card trim panels 🌬️ Outlet Film Covers air outlet surrounds and bezels 🧰 Installation Toolkit Includes scraper tool and cleaning cloth Product Highlights Ultra-clear TPU material maintains factory interior appearance with zero visual distortion Self-healing surface layer repairs light scratches and scuffs with ambient or applied heat Precision die-cut for the 2018 Range Rover L405 LWB — no trimming required Covers 9 high-contact interior zones in a single comprehensive kit Pressure-sensitive adhesive leaves zero residue on removal Resistant to UV discolouration — stays optically clear over time Protects against fingernail marks, key scratches, and ring abrasions Flexible TPU conforms to curved and textured surfaces without bubbling Compatible with factory gloss, satin, and piano black interior trims Installation toolkit included — no specialist tools or dealership visit required Compatibility Vehicle Code Year Range Fit Range Rover Vogue LWB L405 2018 Direct Fit Range Rover Vogue SWB L405 2018 Verify Before Purchase Range Rover Vogue L405 L405 2013–2017 Not Compatible Range Rover Vogue L405 L405 2019–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover L460 L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–75 minutes  ·  Tools: Included in kit Thoroughly clean all target surfaces using the included microfibre cloth. Remove any dust, oils, or residues that could affect adhesion. Allow surfaces to dry completely. Work in a dry, temperature-controlled environment — ideally between 15°C and 25°C. Avoid installation in cold, damp, or humid conditions. Identify each film piece against the corresponding surface before peeling. The kit is labelled by placement zone for easy reference. Peel back a small section of the backing film and align the TPU piece precisely against the panel edge. Work slowly from one end to the other, pressing down firmly with the included scraper as you go. Use the scraper tool to smooth out any air bubbles toward the nearest edge. For tight curves, gentle finger pressure works alongside the scraper. Once all pieces are applied, press all edges firmly for 30–60 seconds to ensure full adhesion, paying particular attention to corners and cut-outs. Allow a minimum of 48 hours before cleaning the vehicle interior. Avoid any chemical cleaners or solvent-based products on or near the film. ⚠ Important: Do not install during rain, snow, or freezing temperatures. Avoid washing the vehicle interior or applying any cleaning products for 48 hours post-installation. Never use chemical agents, alcohol, or solvent cleaners directly on the protective film — warm water and a soft cloth are sufficient for ongoing maintenance. Protect Your Range Rover's Interior — For Good The 2018 Range Rover L405 deserves to look exactly as it did the day you took delivery. This film kit is one of the simplest, most effective ways to ensure it does — for years to come. Explore our full Range Rover L405 accessories collection to complete your build. Shop Range Rover L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Tesla Model 3 · Interior Protection Trunk and Cargo Durable Mat for Tesla Model 3 Premium silicone protection that safeguards your Model 3's cargo area while delivering effortless maintenance and lasting durability. Model 3 2017–2024 Silicone Rubber Waterproof Non-Slip 3-Piece Set Complete Cargo Protection Your Tesla Model 3 deserves better than bare metal and plastic. This premium trunk and cargo mat system is engineered to shield your vehicle's interior from spills, dirt, debris, and everyday wear. Whether you're hauling groceries, luggage, or gear, this three-piece mat set creates a protective barrier that keeps damage at bay. Built from food-grade, non-toxic silicone rubber with zero odour, this mat combines industrial durability with thoughtful design. The distinctive geometric 3D texture isn't just visual—it provides structural reinforcement, dampens noise, and prevents cargo from sliding. High-sided walls contain spills and liquids before they reach your vehicle's floor, while the non-slip surface keeps items secure on the move. Installation is instant. No tools. No adhesives. Just lay it down and drive with confidence. Cleaning takes seconds—water rinses everything away. This is the kind of practical upgrade that makes ownership easier, smarter, and more rewarding. What's Included 🛡️ Trunk Mat 107 × 110 × 3cm – Main cargo area coverage 📦 Front Box Mat 62 × 43 × 3cm – Frunk protection ⚙️ Underlayer Pad 72 × 44 × 3cm – Undercarriage support Product Highlights Food-grade silicone rubber—non-toxic, odourless, chemically inert High-sided edges contain spillage and prevent liquid ingress Geometric 3D texture adds strength, reduces flex, dampens road noise Waterproof finish sheds liquids instantly Non-slip surface keeps cargo stable during acceleration and braking Wear-resistant formulation handles sharp objects and abrasion Water-only cleaning—no chemicals, solvents, or specialised products needed Odourless—maintains cabin air quality from day one UV-stable black finish resists fading and discolouration Precision-cut design for Model 3—no trimming or adjustment required Technical Specifications Specification Details Material Premium Silicone Rubber Colour Black Trunk Mat Dimensions 107 × 110 × 3cm (42.13 × 43.31 × 1.18") Front Box Mat Dimensions 62 × 43 × 3cm (24.41 × 16.93 × 1.18") Underlayer Pad Dimensions 72 × 44 × 3cm (28.35 × 17.32 × 1.18") Waterproof Rating Yes Non-Slip Surface Yes Installation Tools Required None Quantity 1 Complete Set (3 Pieces) Installation & Care Fitting Your Mat Open your Model 3 trunk and frunk completely. Remove any existing floor covers or protective materials. Lay the trunk mat first, centring it within the cargo bay. Position the underlayer pad where the trunk meets the wheelarch area. Place the front box mat in the frunk, smoothing out any air pockets. No fastening required—silicone adhesion and weight hold the mats in place. Drive normally. The mats will settle and conform to your vehicle's contours within the first few journeys. Note: Allow 24 hours for full material relaxation after initial fitting. Do not apply heavy loads within this period. Cleaning: Wipe spills immediately with a damp cloth. For deeper cleaning, remove the mats and rinse under running water. Dry with a soft cloth. Avoid harsh detergents, bleach, or abrasive scrubbers—plain water is all you need. Ready to Protect Your Model 3? Premium cargo protection shouldn't require compromise. This silicone mat system delivers industrial durability, effortless cleaning, and flawless fit—all at a price that respects your intelligence. Add to Basket Use code 22GET20 for 20% off when buying any 2 items ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 Support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Tesla, Inc., or any official Tesla dealer or service centre. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. Product fitment is verified for accuracy, but individual vehicles may vary. Installation instructions are provided for guidance only—professional fitting is recommended if you are uncertain.

Victorious Automotive · Toyota Land Cruiser LC250 · Trunk & Cargo Retractable Trunk Cargo Cover & Curtain Partition for Toyota Land Cruiser 250 Prado LC250 (2024–2025) A precision-engineered retractable cargo cover that conceals your LC250's boot contents, blocks UV exposure, and integrates seamlessly into the vehicle's original trim — no gaps, no compromise. LC250 2024–2025 Retractable Cover Aluminium Alloy Frame Textured Canvas UV Protection No-Drill Fit Black / Fibre Pattern Direct Fit Overview The 2024 Toyota Land Cruiser 250 Prado is a vehicle built for those who refuse to compromise — combining genuine off-road capability with a cabin that competes at the premium end of the SUV spectrum. Whether it's navigating rugged terrain or carrying gear for extended overland trips, the LC250's cargo area works hard. Keeping that space organised and secure is not a luxury; it's a practical necessity for owners who use their vehicles as intended. This retractable trunk cargo cover has been engineered specifically for the LC250's boot geometry, making use of the factory side notches for a flush, gap-free installation. The cover extends and retracts on a smooth mechanism, allowing full or partial coverage depending on your load. When not in use, it tucks away cleanly without raising the boot floor or interfering with the vehicle's original headroom. Two finish options — Matte Black and Fibre Pattern — ensure it complements the interior's aesthetic rather than clashing with it. Constructed from a thickened aluminium alloy rail system paired with a durable textured canvas surface, this is not a lightweight aftermarket attempt. The material combination provides genuine rigidity when extended, effectively shielding items from view and from direct sunlight — reducing interior heat and protecting sensitive cargo. For LC250 owners who carry valuables, camera equipment, or simply prefer a tidy boot presentation, this cover delivers on every count. What's Included 📦 Retractable Cargo Cover 1× full-width unit with aluminium alloy frame and canvas surface 🔩 Mounting Hardware All required fixings for side-notch installation included 📋 Installation Guide Step-by-step instructions for a straightforward fit Product Highlights Direct-fit design engineered specifically for the 2024–2025 LC250 Prado Shields cargo from UV radiation to protect sensitive items and reduce heat build-up Conceals personal belongings, valuables, and equipment from prying eyes Smooth retractable mechanism extends and retracts with minimal effort Thickened aluminium alloy rail provides structural rigidity when deployed Textured canvas surface is durable, wipe-clean, and premium in finish Maintains the boot's original headroom — no raised floor height Seamless side-notch integration leaves no visible gaps in the trim Available in Matte Black and Fibre Pattern to suit interior preference No permanent modifications required — preserves factory interior integrity Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 Prado LC250 2024 – 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021 – 2025 Not Compatible Toyota Land Cruiser 200 LC200 2008 – 2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009 – 2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Remove any existing cargo tray liners or loose items from the boot area to ensure a clear working space. Identify the factory side notches located on the inner trim panels on both sides of the LC250's boot — these are the mounting points for the cover's end brackets. Align the cover's left and right end brackets with the corresponding side notches and press firmly until the unit clicks securely into position. Gently extend the cover across the full width of the boot to confirm it sits flush with no visible gaps along the edges or rear trim panel. Test the retract function several times to ensure smooth, consistent operation before replacing any removed items. Verify the cover sits level and does not interfere with the tailgate closing mechanism before use. ⚠ Before Purchase: This cover is engineered exclusively for the 2024–2025 Toyota Land Cruiser 250 Prado (LC250). Please confirm your exact model year and variant before ordering. It is not compatible with previous Prado generations or any LC300 variant. If you are uncertain, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before placing your order. Built for the LC250. Finished to Last. The LC250 deserves accessories that match its standard. Browse the full Toyota Land Cruiser LC250 interior collection at Victorious Automotive and equip your vehicle properly — with parts that fit first time, every time. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Cargo Organisation Trunk Divider Net for Land Rover Defender 110 & 90 (2020–2024) — L663 Custom-Fit Cargo Isolation Net A precision-engineered trunk divider net built exclusively for the L663 Defender — keeping luggage contained, pets separated, and your load bay organised on every journey. Defender L663 2020–2024 110 & 90 Premium Mesh Custom Fit Cargo Divider No-Drill Install Pet & Luggage Safe Overview The Land Rover Defender L663 was engineered for those who go further — whether that's a weekend trail, a cross-country overland build, or a daily drive that demands total practicality. The load bay of the Defender 110 and 90 is generous by design, but without the right organisation, loose cargo shifts, slides, and compromises both safety and the integrity of your interior. This Trunk Divider Net is purpose-built for the 2020–2024 Defender L663 platform, designed to slot precisely into the rear cargo area and create a defined barrier between luggage, equipment, and passengers or pets. The high-tensile mesh construction absorbs impact forces without stretching out of shape, and the mounting hardware integrates cleanly with existing anchor points — no drilling, no modification, and no permanent alteration to your vehicle. For Defender owners who treat their vehicle as a tool as much as a statement, this net delivers the kind of quiet, reliable functionality that simply works. It installs in minutes, disappears into the cabin aesthetic, and gives you confidence that what's behind the rear seats stays exactly where you put it — whatever the terrain. What's Included 🕸️ Trunk Divider Net Custom-fit mesh net for L663 Defender load bay 🔩 Mounting Hardware Set All fixings and clips required for installation 🪝 Anchor Hooks Heavy-duty hooks for load point attachment 📋 Installation Guide Step-by-step instructions included — manual available on request Product Highlights Custom-engineered fit for the Defender L663 110 and 90 load bay dimensions High-tensile premium mesh retains shape under sustained load and impact Tool-free installation — mounts to existing anchor points with no drilling Effectively isolates pets, luggage, and equipment from the passenger cabin Discreet low-profile design integrates with the Defender's utilitarian interior Reinforced edge stitching and durable border framing for long-term durability Fully adjustable tensioning to suit varying cargo heights and configurations Compatible with Defender 110 five-seat and seven-seat load configurations Removable and re-installable without tools — collapses flat for easy storage Ideal for overlanding, family travel, working vehicles, and pet transport Compatibility Model Year Range Variant Fit Defender 110 (L663) 2020–2024 5-Seat & 7-Seat Direct Fit Defender 90 (L663) 2020–2024 Standard Direct Fit Defender 130 (L663) 2022–2024 8-Seat Not Compatible Defender 110 (Pre-2020) Pre-2020 Previous Generation Not Compatible Range Rover Sport (L461) 2022–2026 All Variants Not Compatible Range Rover Vogue (L460) 2022–2026 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Open the Defender's rear tailgate and fold or remove any rear seat configurations as needed to access the full load bay area. Locate the existing OEM cargo anchor points and load loops in the boot — these are the primary attachment locations for the divider net. Attach the anchor hooks from the mounting hardware set to the designated load anchor points on both the floor and the upper load area brackets. Unroll and position the trunk divider net vertically across the desired separation point in the load bay, aligning the top and bottom edges with the hook attachment positions. Clip the net border to each anchor hook, working from one side to the other to ensure even tension across the full width of the net. Adjust the tensioning where applicable to ensure the net sits taut, upright, and flush — confirming there is no excess slack that could allow cargo movement. Close the tailgate and perform a brief check from the passenger cabin side to confirm the net is secure and correctly positioned before driving. ⚠ Important: Always verify your specific Defender variant and model year before purchasing. The Defender 90 and 110 share this net's compatibility, but load bay dimensions may vary slightly between seating configurations. Contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions before ordering. Complete Your Defender L663 Interior Explore our full range of Defender 110 and 90 accessories — from boot liners and cargo organizers to interior protection and styling upgrades, all engineered to the same standard. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Defender, Land Rover, and L663 — are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious · Land Cruiser LC300 · Interior Power Trunk Power Plug 12V to 220V Converter for Toyota Land Cruiser 300 (2021–2024) Transform your LC300 trunk into a portable power hub with seamless AC voltage conversion. LC300 2021–2024 Interior Power Inverter 12V to 220V Overview If you spend serious time in your Land Cruiser 300, power access is non-negotiable. This trunk-mounted 12V to 220V converter gives you the ability to run AC-powered devices—camping gear, portable refrigerators, power tools, laptops, and medical equipment—directly from your vehicle's electrical system without compromise. The converter is engineered specifically for the LC300 chassis (2021–2024) and integrates into the trunk using factory-standard mounting points. Its high-quality copper core ensures stable, reliable conversion with built-in overcurrent and temperature protection. Whether you're on expedition, remote base camp, or simply need emergency power, this unit delivers consistent 220V output at up to 1500W continuous draw. Installation is straightforward—no modification to factory wiring required. The unit ships with a comprehensive installation guide and full compatibility with your LC300's trunk architecture. Available in black or white to match your interior finish. What's Included ⚡ 12V to 220V Converter Main power unit with 1500W capacity 📋 Installation Guide Step-by-step instructions & wiring diagram 🔧 Mounting Bracket Factory-fit trunk integration hardware 🛡️ Warranty Card 12-month manufacturer coverage Product Highlights Direct-fit design for LC300 trunk with zero modifications needed High-capacity 1500W continuous power output for multiple devices Copper-core transformer ensures voltage stability and longevity Integrated overcurrent and thermal protection for device safety Converts 12V DC to stable 220V AC output at 50Hz Available in black or white finishes to match cabin aesthetic Comprehensive installation guide with wiring diagram included Remote temperature monitoring with automatic shutdown feature Compact trunk-integrated design minimises cargo space impact Compatible with fridge units, power tools, laptops, and camping equipment Compatibility Model Years Status Toyota Land Cruiser 300 (LC300) 2021–2024 Direct Fit Land Cruiser LC250 2024+ Not Compatible Land Cruiser LC200 2007–2020 Not Compatible Land Cruiser Prado All Years Not Compatible Installation Notes Difficulty Level: Intermediate | Time Required: 45–60 minutes Disconnect the negative battery terminal on your LC300. Remove trunk trim panels to access the mounting location (see guide for exact points). Attach the mounting bracket to the factory anchor points using provided hardware. Position the converter unit on the bracket and secure with vibration-dampening clips. Route the positive and negative wiring through the existing conduit to the battery bay. Connect the main power cable to the battery using an inline fuse holder (100A recommended). Reconnect the negative battery terminal and test the AC outlet with a device. Reinstall trim panels and verify clearance for trunk closure. Safety: This unit draws significant current from your battery. Use only when the engine is running or during extended idle periods with the alternator active. Do not attempt to run the converter continuously on battery alone for more than 15 minutes, as it may drain the main battery and prevent engine start. Ready to Power Your Adventures? The Trunk Power Plug 12V to 220V Converter transforms your LC300 into a genuine power hub for expedition, work, and remote living. Order today and unlock the full potential of your vehicle's electrical system. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 Expert support: +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Toyota, Jaguar Land Rover, or any OEM manufacturer. All vehicle names, logos, and trademarks remain the property of their respective owners. Product compatibility is based on detailed engineering research; always verify fitment with the included installation guide before purchase. ```

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Trunk Power Plug for 2024 Toyota Land Cruiser 250 (LC250) A precision-engineered in-boot power solution for the LC250 — plug-and-play installation with no cutting, no splicing, and no compromise to your vehicle's factory wiring. LC250 2024 Model Year Trunk / Boot Interior Plug-and-Play 250V / 10A Rated Premium Copper Core Black & White Variants No Wiring Damage Overview The 2024 Toyota Land Cruiser 250 represents a significant evolution in the Land Cruiser lineage — more capable, more refined, and more versatile than any generation before it. Owners who use their LC250 as a genuine expedition or overland platform know how critical a reliable, accessible power source in the boot can be, whether for powering fridge compressors, lighting rigs, or charging equipment on the go. This Trunk Power Plug has been designed specifically for the 2024 LC250's boot cavity and factory wiring architecture. Unlike generic power adapters that require invasive cable routing or terminal splicing, this unit connects directly to your existing vehicle infrastructure with a clean, flush-fitting plug. The high-conductivity copper core ensures minimal resistance and maximum energy transfer, while the integrated anti-insertion safety mechanism prevents accidental single-pole contact — a feature often overlooked on cheaper alternatives. Available in both Black and White to suit different boot interior trims, this plug is built to integrate seamlessly rather than look like an afterthought. If you're building out your LC250 for adventure, remote travel, or simply want a clean and usable power point in the rear of the vehicle, this is the part that finishes the job properly. What's Included 🔌 Trunk Power Plug × 1 LC250-specific boot power plug, Black or White 📄 Installation Guide Step-by-step printed fitting instructions 🛡️ Hardware Pack All necessary fixing hardware included 🎥 Video Support Access QR-linked instructional video for guided fitting Product Highlights Engineered specifically for the 2024 Toyota Land Cruiser LC250 Plug-and-play installation — no cutting or splicing of factory wiring Premium copper core for high-efficiency power conductivity Anti-insertion safety design prevents single-pole contact accidents Maximum rating of 250V / 10A for broad device compatibility Available in Black and White to match boot trim colour Upgraded sleek profile for a factory-integrated appearance Durable plug-in resistance construction for long-term daily use No permanent modification to vehicle — fully reversible fitment Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Year Range Trim / Grade Fitment Toyota Land Cruiser 250 (LC250) 2024 GX, GXL, VX, Sahara, All Grades Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Grades Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Grades Not Compatible Toyota Land Cruiser Prado All Years All Grades Not Compatible Toyota 4Runner All Years All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Open the LC250 boot and locate the factory power point housing in the boot side panel or floor area relevant to your build specification. Identify the factory connector point — no panel removal is required on most LC250 variants. Align the Trunk Power Plug with the factory socket orientation and press firmly until the connector clicks into place. Verify the plug is fully seated by gently testing for movement — a properly installed unit will be firm and flush. Connect your desired accessory or power cable to the plug and test operation before closing the boot. Consult the included guide or scan the QR code to access the video walkthrough if any step is unclear. ⚠ Note: Installation specifics may vary slightly depending on regional LC250 specification and optional factory equipment. If you are unsure at any stage, do not force the connector. Contact our support team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before proceeding. Complete Your LC250 Interior Explore our full range of Toyota Land Cruiser LC250 accessories — from boot liners and interior protection to lighting and storage solutions — all curated for owners who won't compromise on quality. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or officially approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Velar · Interior Trim Tweeter & Speaker Silver Trim for Range Rover Velar 2017–2020 Elevate your Velar's cabin with precision-cut matte silver tweeter and speaker surrounds — a clean, factory-grade upgrade that delivers the SVR aesthetic without the dealership price tag. Range Rover Velar 2017–2020 Matte Silver TPU Material Clip-On Fit SVR Look Set of 2 No Drilling Overview The Range Rover Velar was designed to blur the line between art and engineering — a vehicle that made minimalism feel genuinely luxurious. But even in that context, the standard interior trim can feel like it's leaving something on the table, particularly when viewed against the more purposeful, contrast-rich cabin of the SVR derivative. That gap is exactly where this upgrade steps in. These matte silver tweeter and speaker surrounds are precision laser-cut from high-quality carbon TPU, engineered specifically for the 2017–2020 Range Rover Velar. Each piece clips directly over the existing speaker housing — no adhesive, no drilling, no permanent modification. The result is a seamless, factory-finish appearance that integrates naturally with the Velar's signature interior language. Supplied as a pair, these trims form part of the Victorious Silver Interior Package for the Velar — a curated collection of complementary matte silver accents designed to work together across the cabin. Whether you're upgrading incrementally or going for the full interior transformation, this is a detail that makes an immediate visual impact every time you open the door. What's Included 🔊 Silver Tweeter / Speaker Trim × 2 Matte silver, laser-cut TPU — left and right pair 📋 Fitting Guide Simple step-by-step installation instructions included 🛡️ Protective Packaging Safely packaged to arrive scratch-free and ready to fit Product Highlights Precision laser-cut for an exact, gap-free fit on the Velar housing Matte silver finish — subtle, premium, and SVR-inspired Clips directly over existing speaker trim — zero modification required High-quality carbon TPU construction for durability and rigidity Supplied as a full pair — left and right door trims included Part of the wider Victorious Silver Interior Package for the Velar No adhesive, no drilling, no risk of interior damage Achieves the SVR interior look at a fraction of the cost Tool-free installation completable in under 10 minutes Reversible — original trim can be restored at any time Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar 2021–2023 All Trims (Facelift) Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 2011–2018 All Trims Not Compatible Range Rover Evoque L551 2019–2024 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Time: 5–10 Minutes  ·  🛠 Tools Required: None Start with the vehicle stationary and the interior at room temperature to ensure the TPU clips seat cleanly. Locate the existing tweeter / speaker housing on the door panel of your Velar — the trim surrounds the speaker grille. Take the corresponding silver trim piece (left or right) and align it centrally over the existing housing. Apply gentle, even pressure around the perimeter of the trim until you hear and feel it clip securely into place. Repeat for the second door. Run a finger around the edge to confirm full, flush contact with no lifting. Stand back and inspect both trims from a natural viewing angle to confirm alignment and finish. ⚠ Please Note: These trims are designed exclusively for the pre-facelift Range Rover Velar (2017–2020). Attempting to fit them to later or alternative models may result in an imperfect fit. If you are unsure of your model year, check your V5C or contact us on +44 203 943 9919 before ordering. Complete the Look These speaker trims are part of a full Silver Interior Package for the Range Rover Velar. Browse the complete collection to match your door handles, climate controls, and dashboard accents — and bring the SVR interior aesthetic to your build. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Toyota Land Cruiser LC300 · Exterior Styling Twin Turbo Lettering Sticker for Toyota Land Cruiser 300 Premium chrome-effect tailgate emblem that elevates the appearance of your LC300 with motorsport-inspired twin turbocharged styling. LC300 / FJ300 2021–2024 Chrome Electroplated Direct Fit Tailgate Self-Adhesive Overview The Toyota Land Cruiser 300 demands the kind of purposeful styling that reflects its legendary capability. This Twin Turbo lettering sticker captures that performance-first aesthetic with precision engineering and premium materials. Mounted on the tailgate, it announces your LC300's true character to the road ahead. Crafted using an electroplating process, this emblem features a high-gloss chrome finish that withstands the elements whilst maintaining its lustrous appearance season after season. The authentic twin turbo badge speaks to power delivery and engineering prowess—a subtle nod to turbocharged performance that resonates with Land Cruiser aficionados worldwide. Installation takes minutes. The self-adhesive backing requires no drilling, welding, or permanent modifications. Your tailgate returns to factory condition in seconds if needed. This is a lossless upgrade in every sense: pure aesthetics, zero compromise. What's Included 🏷️ Twin Turbo Lettering Sticker Electroplated chrome effect badge 🧼 Cleaning Wipe Pre-installation surface prep 📋 Installation Guide Step-by-step instructions included Product Highlights Electroplating process ensures durability and UV resistance Chrome finish maintains luster in all weather conditions Direct fit for Land Cruiser 300 tailgate (2021–2024) Self-adhesive backing—no tools or drilling required Lossless installation and removal without surface damage Performance-inspired twin turbo styling authenticity Precise alignment and factory appearance Premium materials resist oxidation and fading Lightweight design—zero impact on vehicle dynamics Pairs seamlessly with all LC300 trim levels Compatibility Vehicle Model Year Range Compatibility Toyota Land Cruiser 300 (LC300) 2021–2024 Direct Fit Toyota Land Cruiser FJ300 2021–2024 Direct Fit Land Cruiser 250 (LC250) All years Not Compatible Land Cruiser 200 (J200) All years Not Compatible Installation Difficulty Level: Beginner | Time: 5 minutes Clean the tailgate. Use the provided wipe to thoroughly clean the mounting area where the badge will sit. Remove all dirt, dust, and residue. Allow 2–3 minutes for the surface to dry completely. Position the sticker. Carefully align the Twin Turbo lettering sticker on the tailgate. Refer to the positioning guide for factory-correct placement. Make micro-adjustments as needed before pressing down. Press and secure. Using steady, even pressure, press the sticker onto the surface from centre outward. Eliminate any air bubbles by working from the middle towards the edges. Allow adhesive cure time. Wait 24 hours before washing or exposing the vehicle to heavy moisture. The adhesive reaches full strength after one day. Enjoy your upgraded LC300. Step back and admire the premium styling upgrade your Land Cruiser 300 deserves. Tip: If the surface is particularly cold (below 10°C), gently warm the sticker backing with your hand for 10–15 seconds to improve adhesion. Own the Look Your LC300 Deserves Premium styling shouldn't require compromise. This Twin Turbo lettering sticker delivers motorsport-inspired authenticity in minutes, with zero permanent modifications. Your Land Cruiser 300 speaks for itself—let this badge say it louder. Shop Land Cruiser LC300 Collection Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL/FedEx shipping +44 203 943 9919 — Expert support Victorious Automotive is an independent accessory specialist and is not affiliated with Toyota Motor Corporation, Land Cruiser, or any official Toyota brand entity. Product names and references are used for fitment description only. Toyota and Land Cruiser are registered trademarks of their respective owners.

Victorious Automotive · Toyota Land Cruiser LC250 · Exterior Lighting Two-Color Gold Front Fog Lamp — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Switchable white and yellow LED fog lighting engineered for the LC250 — precision-fit, plug-and-play, and built to perform in every condition the road throws at you. LC250 2024–2025 Dual-Color LED ABS Construction Plug-and-Play Gold Finish Front Fog Lamp Prado Overview The Toyota Land Cruiser 250 — also known as the Prado LC250 — arrived for 2024 as one of the most capable and thoughtfully engineered SUVs on the market. Whether you're navigating tight mountain passes or pushing through poor-visibility lowland roads, the LC250 deserves lighting hardware that matches its capability. The factory fog lamps do their job, but enthusiasts who live in variable climates or tackle genuine off-road terrain know that adaptable lighting is not a luxury — it's a necessity. This Two-Color Gold Front Fog Lamp is purpose-designed for the 2024–2025 Land Cruiser 250, offering a seamless upgrade that slots directly into the original fog lamp housing with no cutting, no splicing, and no guesswork. The standout feature is its dual-mode illumination: a first-press delivers crisp white light for clear-weather visibility and a second-press switches to penetrating amber-yellow light — the preferred choice for fog, heavy rain, snow, and dust conditions where white light scatters and reduces clarity. Constructed from high-quality ABS with a premium gold finish, this fog lamp holds up to vibration, moisture, and temperature extremes without compromising on aesthetics. It uses the original OEM socket connection for a secure, rattle-free fit — meaning once installed, you won't know it wasn't there from the factory. For LC250 owners who refuse to compromise on either function or form, this is the upgrade that delivers on both fronts. What's Included 💡 Two-Color Gold Front Fog Lamp 1 x unit — dual-mode white/yellow LED, gold finish 🔌 OEM-Compatible Connector Plug-in harness matching original LC250 socket 🔩 Mounting Hardware All fixing hardware required for installation 📄 Installation Reference Basic fitting guide included in packaging Product Highlights Dual-color switching: white light on first activation, amber-yellow on second for optimised fog and rain penetration Gold decorative finish gives the LC250 front end a distinctive, premium look that complements the factory design language High-quality ABS housing resists cracking, UV fading, and road vibration for long-term reliability Direct OEM socket compatibility — no wiring modifications required, preserving factory electrics and warranty integrity Yellow light mode reduces backscatter in poor weather, significantly improving driver visibility in fog, snow, and rain Engineered specifically for 2024–2025 LC250 and Prado models — not a universal fit, ensuring precise alignment every time White light mode provides broad, clear beam spread for night-time driving on unlit roads and trails Lightweight ABS construction adds zero meaningful weight, keeping the front-end balance of your LC250 unchanged Simple two-step installation achievable with basic tools in under an hour — no specialist equipment needed Tested for moisture ingress resistance, making it suitable for river crossings, heavy rain, and off-road mud environments Compatibility Vehicle Code Year Range Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado LC250 (Prado) 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–60 Minutes  |  🛠 Tools: Basic Hand Tools Ensure the vehicle is parked on a flat surface with the ignition off and keys removed before beginning any work. Locate the existing front fog lamp assembly on the affected side. Remove the front bumper access panel or fog lamp retaining clips as required to access the unit. Disconnect the original fog lamp from the OEM wiring harness by pressing the connector release tab and pulling firmly but carefully. Remove the existing fog lamp from the housing by unscrewing the retaining fasteners and withdrawing the unit. Position the new Two-Color Gold Fog Lamp into the housing, aligning the mounting points. Secure with the original or supplied fasteners — do not overtighten. Connect the OEM-compatible plug from the new lamp directly into the vehicle's wiring harness until it clicks securely into place. Before reassembling, turn the ignition to the accessory position and test both light modes: press once for white, press again for yellow. Confirm both modes activate correctly. Refit the access panel or bumper trim, ensuring all clips are fully seated. Repeat on the opposite side if fitting a pair. ⚠ Important: Always test lighting functions fully before permanent reassembly. If your vehicle is within its manufacturer warranty period, confirm with your dealer that this accessory fitment is acceptable before installation. Ensure no wires are pinched during bumper trim refitting. Upgrade Your LC250 — The Right Way At Victorious Automotive, every product we list for the Land Cruiser LC250 is selected because it genuinely improves the driving experience without compromising the vehicle's integrity. This fog lamp is no exception — precise fitment, real-world function, and a finish that looks the part. Shop the full LC250 exterior collection below. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment compatibility identification. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Sport L320 · Lighting Upgrades Ultra Bright SMD White LED Angel Eyes Halo Ring Daytime Running Light Kit — Range Rover Sport L320 (2003–2009) Transform the front-end presence of your early Range Rover Sport with crisp, high-output SMD LED halo rings that deliver both striking style and genuine DRL functionality — precision-fitted for the L320 platform. L320 2003–2009 SMD LED Angel Eyes Halo Ring Daytime Running Light 12V 3500LM CE Certified White HochiTech Plug & Play Overview The Range Rover Sport L320, produced between 2003 and 2009, remains one of the most purposeful and recognisable SUVs ever to wear the Land Rover badge. Its bold, squared-off headlight clusters gave it a distinctive road presence — but the era's halogen optics have always left room for improvement. For owners who want their L320 to look as commanding at standstill as it does on the road, this LED angel eye upgrade is one of the most effective and reversible modifications available. This kit from HochiTech features ultra-bright Surface Mounted Device (SMD) LED technology arranged in a precision halo ring format. Running at 12V and outputting a combined 3,500 lumens per set, the rings produce a clean, pure white light signature that integrates naturally into the L320's existing headlight housing. Whether used as daytime running lights, decorative illumination, or both, the visual impact is immediate and substantial — giving the front end a modern, premium feel without altering the factory aesthetic. Constructed from durable ABS housings with CE-certified LED arrays, this kit is built for long-term reliability. The lightweight design (just 350g for the full set) means there's no concern about placing additional load stress on your headlight assemblies. For any L320 owner who appreciates thoughtful, well-executed modifications, this halo ring DRL kit represents outstanding value and a meaningful visual upgrade. What's Included 💡 SMD LED Halo Rings Full set — one per headlight unit 🔌 Wiring Harness Pre-terminated leads for direct connection 🔩 Mounting Hardware ABS retention clips and brackets 📄 Installation Guide Step-by-step fitting reference Product Highlights Ultra-bright SMD LED technology for maximum light output 3,500 lumens per set — genuinely visible in all daylight conditions Pure white light output — clean, modern aesthetic Designed specifically for the Range Rover Sport L320 headlight cluster Functions as both decorative halo rings and daytime running lights Runs on standard 12V vehicle power — no relay modification required Durable ABS housing resists vibration and heat over time Lightweight at just 350g — no stress on headlight assembly CE certified for electrical safety and compliance Fully reversible installation — factory headlights unaltered Compatibility Vehicle Code Year Range Fitment Range Rover Sport L320 2003–2009 Direct Fit Range Rover Sport L320 2010–2013 Not Confirmed Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic hand tools, trim removal kit Safely disconnect the vehicle battery before beginning any work on the headlight assemblies. Remove the front bumper or access panel as required to gain clear access to the back of each headlight unit on the L320. Carefully detach the headlight assembly from its mounting points and disconnect the existing wiring loom connectors. Open the headlight housing (gentle heat from a heat gun may assist with sealed units) and position the SMD halo ring within the reflector bowl, securing with the supplied ABS clips. Route the wiring harness through the existing headlight grommet and connect to a switched 12V ignition feed or DRL circuit as preferred. Reassemble the headlight housing, refit the assembly, and reconnect all factory connectors before reattaching the battery. Test both halo rings before fully refitting any trim panels, confirming even illumination across each ring. ⚠ Important: This kit requires access to the interior of the headlight housing. Opening sealed headlight units may affect their weather resistance if not properly resealed. Use a suitable automotive adhesive sealant when reassembling. If in doubt, consult a qualified auto-electrician or lighting specialist. Always verify your local road traffic regulations regarding the use of additional lighting as DRLs. Upgrade Your L320's Lighting Today The Range Rover Sport deserves lighting that matches its character. This SMD LED angel eye kit is one of the simplest ways to modernise the front-end presence of your L320 — and we're here to help every step of the way. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes are used solely for fitment reference purposes. This product is an aftermarket accessory and is not a genuine Land Rover or JLR part.

Victorious Automotive · Defender L663 · Interior Upgrades Ultra-Suede Gear Shifter Cover for Land Rover Defender L663 90 & 110 (2020–2022) A precision-tailored Ultrasuede and ABS gear shifter cover that brings a refined, tactile upgrade to the Defender L663's centre console — available in Black and Red. Defender L663 2020–2022 90 & 110 Ultrasuede ABS Construction Direct Fit Black & Red Interior Trim No Modification Required Overview The Land Rover Defender L663 is a vehicle defined by capability and character — and its interior deserves to match that standard at every touchpoint. The gear shifter sits at the heart of the driving experience, and yet the factory finish can feel at odds with the premium aspirations that define the modern Defender. This cover addresses that directly, without compromise. Constructed from genuine Ultrasuede — a high-performance microfibre material revered across the automotive world for its soft, suede-like texture and exceptional durability — this gear shifter cover is paired with a precision-formed ABS substrate. Together, they deliver a component that not only looks the part but holds its shape, resists wear, and maintains its quality through daily use in any climate or condition. Unlike generic interior accessories, this cover has been designed specifically around the Defender L663 shifter geometry. The fitment is snug and precise, requiring no adhesives, drilling, or modification. Whether you choose the understated sophistication of Black or the bold contrast of Red, the result is a cabin that feels more considered, more intentional, and more distinctly yours. What's Included 🎛️ Gear Shifter Cover × 1 Ultrasuede & ABS — Black or Red finish 📄 Fitment Reference Visual compatibility guide included Product Highlights Precision-engineered for the Defender L663 90 & 110 gear shifter — no guesswork, no gaps Genuine Ultrasuede microfibre surface — soft, refined, and wear-resistant over time ABS inner shell maintains form and ensures a firm, rattle-free fit Available in Black and Red — complementing both standard and bespoke interior specifications Tool-free installation — clips directly into position in minutes Instantly elevates the tactile quality of the centre console area Ultrasuede resists fading, pilling, and surface degradation under regular use Slim profile — maintains full shifter functionality with no operational interference Subtle, factory-coherent aesthetic — looks as though it belongs, not as though it was added Compatible with both 90 and 110 wheelbase variants of the L663 generation Compatibility Vehicle Model Code Year Range Body Fitment Land Rover Defender L663 2020–2022 90 (3-door) Direct Fit Land Rover Defender L663 2020–2022 110 (5-door) Direct Fit Land Rover Defender L663 2023–Present 90 / 110 Direct Fit Land Rover Defender L316 (Pre-2020) Pre-2020 All Not Compatible Range Rover Sport L461 / L494 All Years All Not Compatible Range Rover Vogue L460 / L405 All Years All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure your Defender is parked with the engine off and the gear selector in the Park (P) position for safe and comfortable access. Inspect the existing gear shifter surround and remove any dust or debris from the surface using a soft, dry cloth to ensure a clean fitment base. Align the Ultrasuede gear shifter cover with the factory shifter housing, taking care to orient the cover correctly relative to the shifter direction and any trim detailing. Apply gentle, even pressure around the perimeter of the cover to click it firmly into the retaining clips. Work around the edges progressively rather than forcing one side at a time. Once seated, check that the cover sits flush on all sides with no lifting or gaps. Operate the gear selector through its full range to confirm zero interference with shifter movement. Note: Actual colour may vary slightly from screen representations due to monitor calibration and studio lighting conditions. Please refer to all provided product imagery before ordering. If you are unsure of compatibility for a 2023 or later Defender L663, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Complete Your Defender Interior This gear shifter cover is one of many precision interior upgrades available for the Defender L663. Explore the full collection and build a cabin that reflects the standard your Defender deserves. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Mini Cooper · R55–R61 · Interior Trim Union Jack Tachometer Cover Sticker for Mini Cooper Premium ABS tachometer cover with iconic Union Jack design—adds British character to your dash in seconds. R55 Clubman R56 Hatch R57 Convertible R58 Coupe R59 Roadster R60 Countryman R61 Paceman ABS Plastic Center Console Easy Install Overview Built for Mini Cooper enthusiasts who refuse to compromise on character, this Union Jack tachometer cover combines authentic British heritage with premium fitment. Whether you're running an R55 Clubman, R56 Hatch, or newer R60 Countryman, this sticker instantly elevates your interior with iconic flag graphics that resonate with the Mini brand DNA. Manufactured from durable ABS plastic and engineered for precise center console placement, this cover adheres cleanly to your tachometer surround without gaps or lifting. The design is laser-cut for exact fitment—no trimming, no guesswork. Multiple colorways let you match your personality: Union Jack red-white-blue, grey variants, checkered patterns, gold, or stealth black. Installation takes under five minutes and requires no tools. Simply clean the surface, peel and stick, and enjoy the transformation. This is the fastest way to personalize your Mini's interior while preserving factory aesthetics. What's Included 📦 Tachometer Cover Sticker 1× Union Jack design, pre-cut ABS ✓ Color Options Union Jack, Grey Jack, Checker, Gold, Black 🧼 Installation Ready Clean, peel, stick—no tools needed ⚡ Fit Guarantee Precision engineered for your model Product Highlights Universal Fitment: R55 Clubman through R61 Paceman—all generations supported Premium ABS Material: Rigid, UV-resistant, won't yellow or peel Precise Center Console Placement: Aligns perfectly with factory tachometer surround 5 Color Variants: Union Jack, Grey Jack, Checkered, Gold, and Black finishes Tool-Free Installation: Adhesive backing—clean, peel, and stick in under 5 minutes Laser-Cut Accuracy: No trimming required; designed for exact fitment Factory-Look Finish: Integrates seamlessly with OEM interior design language Durable & Long-Lasting: Resists sun, heat, and moisture without degradation Wholesale Available: Bulk ordering supported for dealers and customizers Iconic Design: Celebrates Mini's British heritage with bold, recognizable graphics Compatibility Model Generation Year Range Fitment Mini Cooper R55 Clubman 2nd Gen 2007–2014 Direct Fit Mini Cooper R56 Hatch 2nd Gen 2006–2014 Direct Fit Mini Cooper R57 Convertible 2nd Gen 2008–2015 Direct Fit Mini Cooper R58 Coupe 2nd Gen 2011–2015 Direct Fit Mini Cooper R59 Roadster 2nd Gen 2012–2015 Direct Fit Mini Cooper R60 Countryman 2nd Gen 2010–2017 Direct Fit Mini Cooper R61 Paceman 2nd Gen 2013–2016 Direct Fit Mini Cooper R50/R52 (1st Gen) 1st Gen 2001–2007 Not Compatible Mini Cooper F56/F57 (3rd Gen) 3rd Gen 2014+ Not Compatible Installation Notes Difficulty: Beginner | Time: 5 minutes | Tools: None Inspect Placement: Open your Mini's center console and locate the tachometer surround. Verify the area is clear of obstructions and flush against the dash. Clean the Surface: Use a soft, dry cloth to wipe down the tachometer area. Remove any dust, oils, or residue—clean adhesion is critical for long-term durability. Position the Sticker: Carefully align the cover sticker with the tachometer opening. Start at the top center and work your way down, smoothing as you go. Apply Adhesive: Peel back the backing slowly and press firmly across the entire surface. Use a squeegee or credit card to eliminate air bubbles and ensure full contact. Cure Time: Allow 24 hours before operating the vehicle for maximum adhesion strength. Tip: If you make a mistake during application, carefully peel back the sticker and reposition. The ABS material is durable—gentle repositioning won't damage it. Own Your Mini's Interior Transform your dashboard in minutes with authentic Union Jack character. Choose your color, stick it, and celebrate the British spirit of Mini Cooper. Shop Tachometer Covers Now Apply code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mini Cooper, BMW Group, or Mini Car Ltd. All product names and vehicle model designations are used for compatibility and reference purposes only. Mini and Mini Cooper are registered trademarks of their respective owners.

Victorious · Mini Cooper · Interior Union Jack Silica Gel Anti-slip Coaster for Mini Cooper Premium non-slip coasters that protect your Mini's interior while celebrating iconic British styling. Mini All Years Silica Gel Non-Slip Interior Protection Union Jack Design Overview Mini Cooper owners understand that every detail matters. Your vehicle is an extension of personality and style—from the moment you slide into the driver's seat. These Union Jack Silica Gel Anti-slip Coasters are engineered to protect your cupholders and interior surfaces whilst celebrating the heritage and character that define Mini ownership. Crafted from premium silica gel with a robust non-slip base, these coasters prevent beverages, condensation, and everyday wear from marking your dashboard and trim. The iconic Union Jack design transforms a functional accessory into a styling statement that's instantly recognisable and quintessentially British. Whether you're commuting daily or embarking on weekend adventures, these coasters work silently behind the scenes—keeping your interior pristine whilst adding a touch of personality that sets your Mini apart from the rest. What's Included 🛡️ Silica Gel Coasters Premium non-slip material 🇬🇧 Union Jack Design Multiple stylish variations 🚗 Universal Fit Works in any cupholder ✓ Interior Protection Guards against damage & marks Product Highlights Premium silica gel construction resists moisture and staining Aggressive non-slip base prevents movement and sliding Iconic Union Jack design in multiple colour variations Protects dashboard, cupholders, and interior trim Easy to clean—wipe with a damp cloth Lightweight and discreet—barely noticeable when installed Perfect for daily commuting and extended journeys Celebrates British automotive heritage and style Compatible with all Mini Cooper generations 30-day money-back guarantee on all purchases Compatibility Mini Cooper Variant Compatibility Mini Cooper (All Years) Direct Fit Mini Cooper S (All Years) Direct Fit Mini Countryman (All Years) Direct Fit Mini Clubman (All Years) Direct Fit Installation Notes Installation Difficulty: Trivial Time Required: 2 minutes Clean your cupholders or dashboard surfaces with a dry cloth Peel the backing from the non-slip base Position the coaster in your desired location Press firmly for 5 seconds to secure adhesion Allow 24 hours for full cure before use Note: Ensure surfaces are completely dry before application. For maximum durability, avoid extreme heat sources and direct sunlight for extended periods. Why Victorious We're not just accessory retailers—we're enthusiasts who understand what matters to Mini owners. Every product in our collection is selected for quality, durability, and the ability to enhance both function and character. Your Mini deserves protection that doesn't compromise on style. These coasters do exactly that. Ready to Protect Your Interior? Add Union Jack Silica Gel Anti-slip Coasters to your Mini today. Save 20% when you purchase any 2 items with code 22GET20. Shop Now 4.9★ 12,300+ Reviews 30-Day Money Back Worldwide Shipping Mon–Fri 9am–7pm Support Victorious Automotive is not affiliated with, endorsed by, or connected to Mini Cooper or BMW Group. All references to Mini Cooper are for compatibility and informational purposes only. Product specifications are subject to change without notice.

Mini Accessories · Cooper S/ONE · Interior Styling Union Jack Foot Pedals for BMW Mini (2001–2023) Iconic British styling meets premium aluminium construction—complete your Cooper's interior with these distinctive pedal covers. F54 Clubman F55 F56 F57 F60 Countryman 2001–2023 Aluminium & Rubber Direct Fit Overview Whether you're piloting a classic Mini Cooper S or a modern F60 Countryman, these Union Jack-inspired foot pedals celebrate British heritage while transforming your interior. Precision-engineered in high-quality aluminium with premium rubber inserts, they combine aesthetics with everyday functionality. This is more than decoration—it's a statement. Each pedal is designed for direct installation across a comprehensive range of Mini models, meaning no guesswork, no unnecessary modifications. Available in both two-piece and three-piece configurations to match your specific preferences and driving setup. The iconic Union Jack design pays homage to Mini's legendary DNA while modern construction ensures durability and grip in all conditions. Perfect for owners who refuse to compromise on style or substance. What's Included 🚗 Pedal Set (2-Piece) Accelerator & brake covers 🚗 Pedal Set (3-Piece) Includes clutch cover ✦ Premium Finish Aluminium with Union Jack design 🔧 Direct Fit Installation No modifications required Product Highlights High-grade aluminium construction engineered for longevity Rubberised contact surfaces for driver safety and grip Iconic Union Jack print celebrates British automotive heritage Available in both 2 and 3-piece configurations Direct fit design—zero modification required Compatible across Cooper S, ONE, and extended range models Enhanced interior aesthetic without compromising function Lightweight yet robust for daily driving Simple installation for all skill levels Coordinates with OEM and aftermarket Mini interiors Compatibility Mini Model Year Range Compatibility Cooper S (Classic) 2001–2006 Direct Fit Cooper (R56) 2007–2013 Direct Fit Cooper S (R56) 2007–2013 Direct Fit F54 Clubman 2015–2023 Direct Fit F55 (Gen 3) 2014–2023 Direct Fit F56 Cooper S 2014–2023 Direct Fit F57 Convertible 2015–2023 Direct Fit F60 Countryman 2017–2023 Direct Fit Always verify your specific model variant before purchase. If unsure, contact our team at +44 203 943 9919. Installation Difficulty Level: Beginner | Time: 15–20 minutes Ensure the engine is off and the vehicle is parked safely. Remove any existing pedal covers if previously installed. Clean pedal surfaces thoroughly with a dry cloth. Align the new pedal cover with the pedal base, ensuring the Union Jack graphic faces forward. Press firmly and evenly across the entire surface until fully seated. Repeat for brake, accelerator, and (if 3-piece) clutch pedals. Test all pedals to confirm smooth operation and secure fit. Important: Do not operate the vehicle until all pedal covers are securely installed and tested. Ensure covers do not obstruct pedal movement or interfere with floor mats. Transform Your Mini Interior Today Iconic design meets premium construction. These Union Jack pedals deliver authentic British character to your Cooper's cockpit. Order now and drive with style. Shop Pedal Sets Use code 22GET20 for 20% off any 2 items 4.9/5 Stars — 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with, endorsed by, or connected to BMW Group, Mini Cooper, or Jaguar Land Rover. All product names and brand references are the property of their respective owners. This product is designed for custom enhancement and does not modify the vehicle's performance specifications or void manufacturer warranty when installed correctly.

Premium Accessories · Mini Cooper · Mirror Covers Union Jack Rearview Mirror Cover for Mini Cooper Iconic British styling meets premium protection—add character to your Mini with flagship Union Jack designs and durable TPU construction. Mini Cooper R55 / R56 / R60 / R61 High-Grade TPU 3 Design Options Pre-Applied Adhesive Overview Mini Cooper owners understand the value of bold, individualistic styling. These Union Jack rearview mirror covers deliver authentic British character while protecting your mirrors from road debris, scratches, and UV damage. Engineered from premium TPU material, they combine form with lasting durability. Each cover features pre-applied adhesive tape for tool-free installation—no drilling, no permanent modifications. Available in three distinctive designs, these covers work seamlessly across Mini R55, R56, R60, and R61 models, fitting the standard 5.9×3.5-inch mirror format. Whether you're upgrading your Mini's visual presence or safeguarding your mirrors during extended ownership, these covers deliver both aesthetic impact and practical protection in a single upgrade. What's Included 🛡️ Mirror Cover Set One pre-cut cover per order 🔗 Pre-Applied Adhesive Ready to install—no additional tape needed 📐 Perfect Fit Dimensions 5.9 × 3.5 inches—engineered for precision ✨ Design Selection Choose from three iconic Union Jack styles Product Highlights Authentic Union Jack designs celebrate Mini's British heritage Premium TPU material resists UV fading and weathering Scratch and impact protection for mirror glass and frames Pre-applied adhesive tape—installation takes under 2 minutes No drilling, cutting, or permanent modifications required Seamless fit for R55, R56, R60, and R61 models Easy removal without residue or damage to mirrors Three distinct design options to match your style Lightweight and durable—maintains original mirror function Affordable way to refresh your Mini's visual identity Compatibility Mini Model Generation Years Compatibility Mini Cooper Clubman R55 2007–2015 Direct Fit Mini Cooper R56 2006–2014 Direct Fit Mini Countryman R60 2010–2017 Direct Fit Mini Countryman R61 2017–Present Direct Fit All Other Mini Models — — Not Compatible Installation Guide Installation Difficulty: Easy | Time Required: 2–3 Minutes Clean your mirrors: Wipe both mirror caps thoroughly with a dry, lint-free cloth. Remove any dirt, dust, or residue for optimal adhesion. Position the cover: Carefully align the Union Jack cover with your mirror cap, ensuring even spacing on all sides. Press firmly: Apply steady pressure across the entire cover surface for 30 seconds to activate the pre-applied adhesive. Allow curing: Wait 2 hours before exposing mirrors to water or direct sunlight to ensure full bond strength. Verify fit: Check all edges are secure and free from bubbles or creases. Note: Clean mirrors thoroughly before installation. Adhesion depends on a dust-free surface. If removal is needed, gently peel back the cover and clean any remaining residue with warm water and mild soap. Ready to Add British Character to Your Mini? Upgrade your rearview mirrors with iconic Union Jack styling. Premium TPU construction, pre-applied adhesive, and three design options make this the easiest way to refresh your Mini's appearance. Shop Now Use code 22GET20 for 20% off when you purchase any 2 items ⭐ 4.9/5 Stars – 12,300+ verified reviews ✓ 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT 📞 UK Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mini Cooper, BMW, or any official manufacturer. All product names and trademarks are the property of their respective owners. This product is designed for enthusiast customization and does not void manufacturer warranties when installed correctly.

Victorious Automotive · Defender L663 · Exterior Accessories Union Jack Tool Box for Land Rover Defender L663 (2020–2026) — High Gloss Black with Locking Mechanism A distinctly British exterior storage solution purpose-built for the Defender L663, combining bold Union Jack styling with secure, practical tool organisation for every journey. Defender L663 2020–2026 Exterior High Gloss Black Union Jack Design Locking Storage Tool Box Direct Fit Overview The Land Rover Defender L663 was reborn in 2020 as a vehicle that honours decades of off-road heritage while embracing modern engineering and a deeply considered design language. For owners who demand that every accessory live up to that same standard, the exterior details matter just as much as what's under the bonnet. This Union Jack Tool Box is built with exactly that mindset — a piece that looks as though it belongs on the Defender from the factory floor. Finished in high gloss black with a signature Union Jack graphic, this tool box is more than a storage solution — it's a deliberate styling statement that pays homage to the Defender's British roots. The integrated lock provides genuine security for tools, recovery kit, or trail essentials, while the durable outer shell is constructed to handle the demands of daily driving, overland adventures, and everything in between. Where generic storage boxes compromise on fitment or finish, this unit has been developed specifically for the Defender L663 platform. Whether you're headed across the Brecon Beacons or navigating a city car park, the Union Jack Tool Box adds a purposeful, characterful touch to your Defender's exterior — without looking like an afterthought. What's Included 🧰 Union Jack Tool Box High gloss black finish with Union Jack graphic 🔒 Integrated Lock & Key Set Pre-fitted locking mechanism with keys included 🔩 Mounting Hardware All fixings required for secure installation 📄 Fitment Guide Step-by-step installation reference Product Highlights Engineered specifically for the Defender L663 (2020–2026) platform High gloss black finish with bold, inlaid Union Jack design Integrated key lock for secure storage of tools and trail gear Durable outer shell resistant to road debris and UV exposure Spacious interior cavity for tools, recovery equipment, or emergency kit Clean, OEM-adjacent aesthetic that complements Defender styling No drilling or permanent modification required for fitment Lightweight construction — minimal impact on vehicle payload Suitable for on-road and mild off-road use A distinctive British heritage touch for your Defender exterior Compatibility Vehicle Code Years Fitment Land Rover Defender 90 / 110 / 130 L663 2020–2026 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender (Classic) L316 Pre-2016 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–40 Minutes  ·  No Professional Required Unbox the tool box and verify all hardware components are present against the included fitment guide. Identify the correct mounting position on the Defender L663 exterior — refer to the guide for precise placement. Test-fit the tool box in position before committing to any fixings, ensuring clearance and alignment are correct. Secure the tool box using the provided mounting hardware, tightening fixings evenly to avoid stress on the shell. Confirm the locking mechanism operates smoothly and that the lid closes flush with no gaps or rattles. Give the finished installation a once-over at walking speed before your first trip to confirm all fixings are secure. ⚠ Please Note: Confirm your exact Defender L663 variant (90, 110, or 130) and model year prior to purchase. If you have accessory rails, roof rack systems, or aftermarket load areas fitted, check for clearance before installation. Contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions before ordering. Outfit Your Defender the Right Way Every detail on the Defender L663 deserves the same consideration Land Rover put into building it. Browse our full Defender L663 exterior collection at Victorious Automotive and discover accessories engineered to the same standard as your vehicle. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Universal Fit · In-Car Technology Universal Apple CarPlay & Android Auto Receiver — Works With Any Car A 7-inch wireless touchscreen display that brings Apple CarPlay and Android Auto to any vehicle with a 12V port — no head unit replacement required. Universal Fit Apple CarPlay Android Auto 7" IPS Display Wireless Connectivity Bluetooth FM Transmitter 12V Plug-In Dash Mount Voice Control Overview Whether you're driving a Range Rover L405, a Defender L663, a Discovery 4, or any other vehicle that predates integrated smartphone mirroring, the absence of Apple CarPlay or Android Auto is one of the most frustrating cabin compromises. Modern navigation, music streaming, messaging, and hands-free calling are now essential — and retrofitting factory infotainment is often expensive, invasive, and warranty-affecting. This Universal CarPlay and Android Auto Receiver from Victorious Automotive solves that problem cleanly. The 7-inch IPS touchscreen mounts directly to your dashboard or windshield via a secure suction mount, plugs into your 12V cigarette lighter socket, and connects to your iPhone or Android device via your standard charging cable. No wiring looms, no dashboard disassembly, no coding required. Within minutes, your vehicle gains a fully functional CarPlay or Android Auto interface — complete with Google Maps, Waze, Apple Maps, Spotify, WhatsApp, Siri, and Google Assistant. The built-in FM transmitter broadcasts audio wirelessly to your car's existing speakers on any FM frequency you choose, while Bluetooth pairing covers calls and music independently of the CarPlay or Android Auto session. It powers on automatically with your ignition, charges your phone via the onboard USB port while in use, and includes ventilation ports to manage heat during long drives or in high-temperature climates. A genuinely practical upgrade for any vehicle owner who wants smartphone integration without compromising their original interior. What's Included 📺 7" IPS Touchscreen Receiver Main display unit with CarPlay & Android Auto 🔧 Suction Dashboard Mount Windshield or dash-top mounting arm 🔌 12V Cigarette Lighter Adapter Powers the unit from any 12V port 📖 User Instruction Guide Setup and pairing reference Note: Phone charging cable (Lightning or USB-C) not included. Use your standard device cable. Product Highlights Wireless Apple CarPlay and Android Auto via 7" IPS touchscreen Wired USB connection for CarPlay, Android Auto, and simultaneous phone charging Built-in FM transmitter — broadcasts audio to your car's existing speakers Bluetooth pairing for calls and music independently of CarPlay/Android Auto Voice control via Siri or Google Assistant — fully hands-free operation Auto power-on with ignition — no manual button press required Built-in USB charging port on the side of the unit Ventilation ports for heat management in warm climates and direct sunlight Compatible with any vehicle with a 12V port and FM radio Supports Waze, Google Maps, Apple Maps, Spotify, SiriusXM, WhatsApp & more Vehicle Compatibility Vehicle Years Compatibility Notes Range Rover Vogue L460 2022–2026 Direct Fit Supplemental display — use 12V port Range Rover Sport L461 2022–2026 Direct Fit Supplemental display — use 12V port Defender L663 2020–2026 Direct Fit Supplemental display — use 12V port Range Rover Vogue L405 2013–2020 Direct Fit Ideal retrofit for pre-CarPlay models Range Rover Sport L494 2013–2020 Direct Fit Ideal retrofit for pre-CarPlay models Range Rover Velar 2018–2022 Direct Fit Supplemental display — use 12V port Land Rover Discovery 5 2017–2024 Direct Fit Works alongside existing InControl Land Rover Discovery 4 2009–2016 Direct Fit Ideal retrofit — no factory CarPlay Land Rover Discovery 3 2004–2009 Direct Fit Ideal retrofit — no factory CarPlay Land Rover Discovery Sport 2015–2024 Direct Fit Works alongside existing system Range Rover Evoque L551 2019–2024 Direct Fit Supplemental display — use 12V port Range Rover Evoque L538 2011–2018 Direct Fit Ideal retrofit — no factory CarPlay Range Rover Sport L320 2005–2013 Direct Fit Ideal retrofit — no factory CarPlay Land Rover Defender (Classic) 2004–2016 Direct Fit Works with any 12V outlet Toyota Land Cruiser LC300 2021–2026 Direct Fit Supplemental display — use 12V port Toyota Land Cruiser LC250 2024–2026 Direct Fit Supplemental display — use 12V port Mercedes G Class / G-Wagon 2019–2026 Direct Fit Supplemental display — use 12V port Any Vehicle Without FM Radio — Check First FM transmitter requires car FM radio Installation Notes Setup Guide — Estimated Time: 5–10 Minutes · No Tools Required Attach the suction mount to a clean section of your dashboard or windshield in a position that does not obstruct your primary view. Avoid placing directly over existing screens if you use a reversing camera on your factory display. Plug the 12V adapter into your vehicle's cigarette lighter socket. The unit will power on automatically when the ignition is turned on. Connect your iPhone or Android smartphone to the USB port on the side of the unit using your standard charging cable (Lightning for iPhone, USB-C for most Android devices). On your phone, accept the CarPlay or Android Auto prompt. The interface will appear on the 7-inch display immediately. Tune your car's FM radio to a clear, unused frequency. Set the same frequency on the unit's FM transmitter to route audio through your car speakers. For Bluetooth-only use (calls and music without CarPlay/Android Auto), navigate to the device's Bluetooth settings and pair your phone directly. Important: This is a supplemental, external display — it does not replace or integrate with your factory head unit or existing touchscreen. It will not interfere with your vehicle's electronics, CANBUS system, or existing InControl/MBUX interfaces. A wired USB connection to your phone is required to use CarPlay or Android Auto; the wireless label refers to the absence of a separate data cable beyond your charging cable. Steering wheel controls are not supported. SiriusXM requires app installation and an active subscription. Common Questions Answered Question Answer Does it replace my factory screen? No — it is an external supplemental display only Does it need a phone to function? Yes — it is not a standalone GPS or media player Does it work without a cable? CarPlay/Android Auto require a USB cable; Bluetooth works wirelessly Does it have a built-in AM/FM tuner? No — audio is routed via FM transmitter or AUX from your phone Does it support steering wheel controls? No — voice control via Siri or Google Assistant is recommended Does it auto-start with the car? Yes — powers on automatically with ignition Does it support Waze and Google Maps? Yes — via Android Auto; via CarPlay with iOS compatibility Will it get hot in direct sunlight? Ventilation ports help manage heat; dash placement advised over windshield Bring Your Cabin Into the Modern Era Whether you're upgrading a classic Defender, a pre-2015 Discovery, or simply adding a secondary display to a newer Range Rover, this receiver delivers the smartphone integration your drive deserves — in under ten minutes, with zero modifications. Shop All In-Car Technology Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Apple Inc., Google LLC, or any original equipment manufacturer. Apple CarPlay and Android Auto are trademarks of their respective owners. Always ensure mounted accessories do not obstruct driver visibility or violate local road safety regulations. Installation is at the owner's discretion.

Victorious · Universal Fit · Interior Storage Universal Fit Sunglasses Holder Storage Box Premium eyewear protection and organisation designed to seamlessly integrate with any vehicle interior. Universal Fit All Years Visor Mount Scratch Protection Multiple Colours Overview Sunglasses are an investment—whether you're driving your Audi through urban streets or enjoying open-road adventures. This Universal Fit Sunglasses Holder Storage Box transforms how you store and access your eyewear, eliminating the frustration of searching the glove box or dashboard while driving. Engineered for precision fit across a wide range of vehicles, this storage solution mounts directly to your visor, keeping sunglasses within arm's reach and protected from scratches, dust, and UV damage. The soft-lined interior cradles your frames while the discreet design blends naturally into your cabin aesthetic. Why it works: A dedicated storage home reduces clutter, extends eyewear lifespan, and eliminates distraction while driving. Simple one-step installation means you're organised within minutes. What's Included 📦 Storage Case Premium soft-lined sunglasses holder 📖 Instruction Manual Easy-to-follow installation guide Product Highlights Protects lenses and frames from scratches and impact Soft-lined interior preserves premium eyewear finish Mounts securely to vehicle visor Universal compatibility across vehicle models Available in multiple colours to match cabin trim Discreet profile keeps interior clean and organised Tool-free installation in under 2 minutes Keeps eyewear within reach whilst driving Reduces dashboard clutter and distraction Extends lifespan of expensive sunglasses Compatibility Vehicle Type Fit Status Notes Audi (All Models) Direct Fit Verify visor dimensions before purchase BMW (All Models) Direct Fit Standard visor mounts Mercedes-Benz (All Models) Direct Fit Compatible with most visor clips Land Rover / Range Rover (All) Direct Fit Works with standard visors Other Makes (General Auto) Direct Fit Universal mounting—check visor size Installation Installation Guide Lower your vehicle's sun visor fully Position the storage box against the visor rear panel Press firmly until the mounting clips engage securely Test by gently pulling the case to confirm it's locked Insert your sunglasses and close the lid Important: Measure your visor width and depth before installation. Most vehicles accommodate standard visors (approximately 160–200mm wide); oversized aftermarket visors may require adapter hardware (sold separately). Ready to Organise Your Cabin? Protect your eyewear investment and declutter your dashboard with this premium sunglasses storage solution. Simple installation, timeless design, and genuine functionality across any vehicle. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9★ Rated by 12,300+ Owners ✓ Worldwide Shipping via DHL, FedEx, UPS, TNT ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with Audi, BMW, Mercedes-Benz, Land Rover, Range Rover, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. Product compatibility is based on standard OEM specifications; individual vehicles may vary.

Victorious Automotive · Range Rover Evoque L538 · Lighting Upgraded Facelift-Style Rear Tail Light Assembly — Range Rover Evoque L538 (2010–2018) Bring your Evoque's rear lighting in line with the post-2016 facelift aesthetic — supplied as a complete pair, ready to fit in under an hour. Evoque L538 2010–2018 Facelift Style Sold as Pair PC + ABS Housing 12V OE Ref: LR072649 / LR072648 3 & 5 Door Pure · Prestige · Dynamic Overview The Range Rover Evoque L538 remains one of Land Rover's most recognisable compact SUVs — its sharp lines and premium detailing have aged gracefully since the model's 2011 debut. For owners of the pre-facelift variants (2011–2015), the rear lighting is one of the most visible styling differences between their car and the refreshed 2016-onwards version. The facelift brought a more sophisticated square inner light design that gave the Evoque a noticeably more modern, upmarket rear-end presence. This tail light assembly set replicates that 2016 facelift style exactly — supplied as a matched left and right pair, finished in PC+ABS composite housing for durability and clarity. Whether you're replacing a damaged unit or simply upgrading the look of an earlier Evoque, these lights deliver a seamless, factory-style result. They cross-reference directly to OE part numbers LR072649 and LR072648, ensuring correct fitment geometry and connector compatibility. Crucially, these fit all body styles and all trim levels of the Evoque L538 — Pure, Prestige and Dynamic, in both 3-door and 5-door configurations. No wiring modifications are required. If you're bringing your pre-2016 Evoque up to facelift spec, this is one of the most impactful and cost-effective changes you can make. What's Included 🔴 Driver Side Tail Light Right-hand rear assembly, facelift square design 🔴 Passenger Side Tail Light Left-hand rear assembly, matched pair 🔌 OE-Style Connectors Plug-and-play compatibility with existing loom 📦 Protective Packaging Each unit individually packed for safe transit Product Highlights Facelift 2016+ square inner light design replication Supplied as a complete left and right pair Fits all Evoque L538 trims — Pure, Prestige, Dynamic Compatible with both 3-door and 5-door body styles PC+ABS composite housing — impact and UV resistant 12V direct plug-and-play — no wiring modifications needed Cross-references OE part LR072649 / LR072648 Ideal upgrade for 2011–2015 pre-facelift Evoque owners Straight replacement for 2016–2018 facelift Evoque owners CCC externally tested and certified Compatibility Vehicle Year Range Body Style Trim Fitment Range Rover Evoque L538 2016–2018 3-Door & 5-Door All Trims Direct Fit Range Rover Evoque L538 2011–2015 3-Door & 5-Door Pure, Prestige, Dynamic Upgrade Fit Range Rover Evoque L538 2010 3-Door & 5-Door All Trims Upgrade Fit Range Rover Evoque L551 2019–2026 All All Not Compatible Range Rover Velar 2017–2026 All All Not Compatible Discovery Sport L550 2014–2026 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: T20 Torx, Trim Removal Tool Open the tailgate and locate the trim panel covering the inner tail light mounting points on each side of the load bay. Using a trim removal tool, carefully prise away the inner boot trim panel to expose the rear light securing bolts or clips. Using a T20 Torx driver, remove the retaining fasteners holding the tail light assembly to the body. Gently pull the light assembly rearward away from the body panel. Avoid forcing — some adhesive sealant may be present on older units. Disconnect the wiring loom connector from the back of the existing assembly. Note the connector orientation. Connect the wiring loom to the new light assembly and confirm the connector clicks securely into place. Position the new assembly into the aperture, ensuring the alignment tabs locate correctly, then re-secure the fasteners. Refit the boot trim panel and test all light functions — brake, indicator, reverse and fog — before driving. ⚠ Note: These are aftermarket assemblies and are not sourced from Land Rover or Jaguar Land Rover. Always test all light functions thoroughly before returning the vehicle to normal use. If in doubt, consult a qualified automotive electrician or Land Rover specialist. Upgrade Your Evoque's Rear End Today One of the most impactful visual changes you can make to a pre-facelift Evoque — supplied as a complete pair and ready to fit. Explore the full Range Rover Evoque L538 accessories collection at Victorious Automotive. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. OE part numbers LR072649 and LR072648 are referenced for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Toyota LC250 · Exterior Styling Upgraded Rear Spoiler for Toyota Land Cruiser 250 Prado LC250 2024–2025 A precision-engineered ABS spoiler that sharpens the roofline profile of the LC250, delivering a purposeful aesthetic upgrade with a factory-finish appearance. LC250 2024–2025 High-Grade ABS Direct Fit Adhesive Mount White / Black Exterior Styling Prado LC250 Overview The Toyota Land Cruiser 250 — sold in many markets as the Prado LC250 — represents a bold new generation of the iconic nameplate, combining modern SUV refinement with genuine off-road credibility. Its angular roofline and upright tailgate lend themselves naturally to a rear spoiler upgrade, where even a subtle addition makes a measurable visual difference from every angle. This upgraded spoiler has been designed from the ground up with the LC250's exact roofline geometry in mind. Unlike generic aftermarket alternatives, the contours follow the factory body curvature precisely — eliminating unsightly gaps or proud edges that can undermine an otherwise clean build. Manufactured from high-grade ABS thermoplastic, the spoiler is lightweight without compromise on structural rigidity, resisting warping, UV degradation, and the expansion cycles that come with daily outdoor use. Available in both Gloss Black and White, the finish is consistent and deep — ready for direct fitment or as a base for a professional colour-match paint job to your LC250's OEM code. Whether you're building an expedition-ready overlander or simply refining your daily driver, this spoiler adds a cohesive finishing touch that looks deliberate, not bolted-on. What's Included 🔲 Rear Spoiler Pre-formed ABS unit, vehicle-specific profile 🩹 3M Adhesive Tape Pre-cut, high-bond automotive-grade strips 📋 Fitment Guide Step-by-step installation instructions Product Highlights Engineered exclusively for the Toyota Land Cruiser 250 / Prado LC250 body shell High-grade ABS construction — lightweight, rigid, and UV-resistant Precision contour-matched to the LC250 roofline for a seamless fit Available in Gloss White and Gloss Black — both paint-ready No drilling required — clean adhesive-tape installation Factory-style appearance with no exposed fixings or visible hardware Resistant to temperature cycling, road vibration, and carwash chemicals Adds visual length and presence to the LC250's tailgate profile Ideal base for OEM colour-match respray for a fully integrated look Direct replacement or brand-new addition — suits stock and modified builds Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Prado LC250 LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Prado 150 Series J150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔧 Tools Required: None Thoroughly clean the spoiler mounting surface on the tailgate with isopropyl alcohol (IPA) — remove all wax, polish residue, and dust. Allow to dry fully. Dry-fit the spoiler against the roofline to confirm alignment and positioning before committing to adhesive placement. Peel the backing from the pre-cut 3M adhesive strips and apply evenly to the underside mounting flange of the spoiler. Carefully align the spoiler to the tailgate surface — work from the centre outward to avoid air pockets or misalignment. Apply firm, even pressure across the full length of the spoiler and hold for 60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain or high-pressure washing. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F) — cold surfaces significantly reduce adhesive bond strength. For a permanent finish, a professional installer can supplement the adhesive with automotive-grade panel adhesive or colour-matched sealant along the edges. Finish Your LC250 the Right Way At Victorious Automotive, every accessory we carry is selected for owners who refuse to settle. Whether you're building the ultimate overland rig or perfecting your daily drive, we've got the parts to get it right. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation, Land Cruiser, or any associated OEM brand. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious · Toyota Land Cruiser LC300 · Interior Storage Water Cup Storage Box 2021–2024 Toyota Land Cruiser LC300 Keep your LC300 cabin organised and clutter-free with this precision-engineered centre console storage solution. LC300 2021–2024 ABS Plastic Flocking Lined Dual Drive Overview The Toyota Land Cruiser LC300 deserves interior refinement that matches its adventure-ready capability. This Water Cup Storage Box fills the gap between your seats—literally and functionally—preventing loose items from disappearing into unreachable spaces while maintaining the clean, minimalist aesthetic that discerning LC300 owners demand. Engineered from durable ABS plastic with soft-touch flocking, this storage box sits flush with your seat frame and won't interfere with seat adjustment or reclining. It's the kind of thoughtful addition that transforms daily ownership: no more fishing for coins, pens, or small essentials. Available in beige or black to blend seamlessly with your interior colour scheme. Designed for both left and right-hand drive variants, this box installs without fasteners and is completely reversible. It's a five-minute upgrade that proves sometimes the best improvements are the simplest ones. What's Included 📦 Water Cup Storage Box Complete assembly, ready to install Product Highlights Keeps centre console organised and clutter-free Prevents items sliding into gaps between seats Compatible with both left and right-hand drive LC300s Soft-touch flocking interior protects cups and items Available in beige or black finishes Durable ABS plastic construction No tools required for installation Non-intrusive seat-mounted design Fully reversible if needed Factory-fit appearance and finish Compatibility Model Years Drive Status Land Cruiser LC300 2021–2022 LHD / RHD Direct Fit Land Cruiser LC300 2023–2024 LHD / RHD Direct Fit Land Cruiser LC250 All years LHD / RHD Not Compatible Other Land Cruiser models Pre-2021 Any Not Compatible Installation Difficulty: Beginner | Time: 5 minutes Open both front door panels and recline front seats fully forward to access the seat frame gaps. Position the storage box between the driver and passenger seats, ensuring it sits flush with the lower seat frame. Gently slide the box down until it catches and locks between the seat frames—no fasteners required. Test that the box is secure by applying gentle upward and lateral pressure. Adjust front seats to normal driving position and verify the box remains stable. Note: Confirm your LC300 model year and drive configuration before ordering. This box is designed exclusively for 2021–2024 LC300 models. If removing, store in a cool, dry place. Upgrade Your LC300 Interior Today Small details elevate ownership. This storage box is proof that thoughtful design doesn't require complexity—just precision engineering and attention to what matters. Shop LC300 Accessories Use code 22GET20 for 20% off when you buy any 2 items 4.9★ 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, or Jaguar Land Rover. All trademarks, logos, and brand names are the property of their respective owners. This product is designed for aftermarket fitment and does not constitute an official Toyota or Land Rover product.

Victorious Automotive · Universal · Car Protection 5-Layer Universal Car Cover – Waterproof & UV Resistant for Sedan & SUV Military-grade all-weather protection for your vehicle, indoors and out. Blocks 80%+ UV rays, water pressure tested to 800mm, and shields against snow, dust, bird droppings, and road salt. 100% Waterproof UV Resistant 5-Layer Polyester Sedan & SUV Indoor & Outdoor S/M/L/XL Sizes Overview Whether you drive a luxury Range Rover, a practical Discovery, or any sedan or SUV up to 187 inches long, your vehicle deserves serious protection. This isn't your typical lightweight cover—it's a five-layer engineered barrier engineered to stand up to British weather and international elements. Built from premium polyester taffeta with military-grade water resistance (800mm water pressure rating), this cover stops rain, sleet, snow, and UV damage in their tracks. The 80%+ reflective summer finish keeps your paint cool when parked in direct sunlight. Winter? It shields against frost, snow accumulation, and road salt spray. The soft inner lining prevents scratching your clear coat, while the outer shell repels bird droppings, tree sap, dust, and airborne contaminants. At just 1kg and available in four sizes, it's light enough to deploy in seconds, yet durable enough to stay in place through wind and weather. Perfect for protected outdoor parking, long-term storage, or year-round garage use. What's Included 📦 5-Layer Car Cover Universal fit, S/M/L/XL 📋 Size Guide Card Measurement reference 🎯 Installation Tips Quick-start instructions 🛡️ 30-Day Guarantee Victorious Automotive promise Product Highlights 5-layer polyester taffeta construction with dual-protection design 800mm water pressure rating – tested against heavy rain and snow melt 80%+ UV reflectivity – keeps paint cooler in summer, blocks harmful rays Soft inner fleece lining – prevents scratches and swirls Fits sedans 360–490cm and SUVs up to 187 inches (460–480cm) Lightweight (1kg) for easy one-person deployment and removal Breathable weave prevents moisture and condensation buildup Elasticated hems and reinforced grommets for secure fitment Suits indoor storage, covered parking, or full outdoor exposure Available in S, M, L, and XL sizes – choose by vehicle length Sizing Guide Vehicle Type Size Vehicle Length Sedan S 360–420 cm Sedan M 420–450 cm Sedan L 450–475 cm Sedan XL 475–490 cm SUV M 420–460 cm SUV L 460–480 cm Installation & Care Deployment (2–3 minutes) Choose the correct size based on your vehicle's length from the guide above Park on level, clean ground away from sharp edges or protruding branches Unpack the cover and lay it flat on your vehicle's bonnet and roof Align the front grommets and secure elasticated hems under the bumper Pull the cover back evenly, securing side and rear hems under the rear bumper Check all edges are tucked and tight—no flapping in wind For outdoor storage, consider additional tie-down cords for high-wind areas Keep Clean: Remove heavy snow or leaf debris regularly to prevent weight buildup. Hose down with cool water monthly to remove dust and salt. Air dry before storage. Protect Your Investment Today Year-round weather protection, indoor or outdoor. Breathable, lightweight, proven. Choose your size and secure your vehicle against the elements—backed by our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back Guarantee ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ 4.9★ 12,300+ Reviews ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any OEM manufacturer. Vehicle names and model codes are used for compatibility reference only. All specifications, dimensions, and performance claims are based on manufacturer testing and real-world user feedback. Always verify size compatibility before purchase. See our full disclaimer at victorious.shop/legal.

Victorious · Universal · Interior Organizers Victorious Automotive Car Bin Organizer Keep your cabin clutter-free with a sleek, collapsible car trash bin designed for Land Rovers, Range Rovers, and Defenders. Universal Fit Interior Organizer Plastic Construction Pressing Type Rolling Cover Black · Dark Gray Overview Whether you're tackling a weekend expedition or managing daily commutes in your Land Rover, Discovery, or Defender, interior cleanliness matters. Crumbs, wrappers, and debris accumulate quickly in any premium cabin. This Victorious Car Bin Organizer solves that problem with a compact, discreet waste solution that blends seamlessly with modern automotive interiors. Engineered from durable plastic with a pressing-type design and convenient rolling cover lid, this bin keeps refuse contained and hidden from view. The round profile minimises dashboard or cupholderspace intrusion, while the collapsible construction allows for easy storage when not in use. Available in sleek black or dark gray to match your vehicle's aesthetic. Perfect for cup holders, door pockets, or console storage, this organiser serves double duty as a desktop waste bin for offices and workspaces. For the discerning enthusiast who refuses to compromise on cabin presentation, this is the upgrade you've been searching for. What's Included 🗑 Car Bin Organizer Rolling cover type, pressing operation 🎨 Colour Options Black or Dark Gray finish 📦 Ready to Install No tools or modifications needed Product Highlights Rolling cover lid design for quick and discreet waste disposal Compact round shape fits standard cup holders and console spaces Durable plastic construction withstands daily use and temperature changes Pressing-type mechanism—intuitive operation, no complicated mechanisms Collapsible design for convenient storage when travelling Blends seamlessly into Range Rover, Defender, and Discovery interiors Dual-purpose: car waste bin or office desktop organiser Available in black and dark gray to match your vehicle's tone Lightweight and non-intrusive—won't obstruct your driving space Easy to clean and maintain for long-term use Compatibility Model Vehicle Code Fitment Range Rover Sport L461 / L494 / L320 Universal Fit Range Rover Vogue L460 / L405 Universal Fit Defender L663 / 2004–2016 Universal Fit Land Rover Discovery 3 / 4 / 5 / Sport Universal Fit Range Rover Evoque L551 / L538 Universal Fit Range Rover Velar 2018–2022 Universal Fit Toyota Land Cruiser LC300 / LC250 Universal Fit Mercedes G-Class G-Wagon Universal Fit Jaecoo J7 J7 Universal Fit Installation & Use Installation Difficulty: Minimal This organiser requires no installation. Simply place it in your preferred location and begin using. Setup Steps Choose your preferred location: cup holder, door pocket, centre console, or desktop If using a cup holder, ensure the bin diameter fits snugly (round shape recommended for standard cup holders) For console placement, ensure it won't interfere with gear shift or controls Press the lid to open and dispose of waste Release the lid—it will roll shut automatically Empty contents as needed by lifting the bin and removing waste Pro Tip: Line the interior with a small plastic bag for easy emptying and maintenance. This prevents residue buildup and keeps your bin fresh between cleanings. Keep Your Cabin Pristine Maintain showroom condition inside your premium Land Rover or Range Rover with this elegant, practical car bin organiser. Discreet design. Intuitive operation. Built to last. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars · 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT UK support: +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Range Rover, Land Rover, Defender, or any official Land Rover entity. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is a third-party accessory designed for compatibility and enhancement only.

```html Victorious · Automotive Cleaning · Accessories Victorious Wireless Handheld Car Vacuum Hoover Ultra-portable cordless cleaning power for your cabin, seats, and hard-to-reach corners with 4KPA suction and wet-dry versatility. All Vehicles Cordless Handheld Wet & Dry 5000mAh Lithium 4KPA Suction Car Interior Cleaning Overview Whether you drive a Range Rover, Defender, Discovery, or any premium 4x4, maintaining a spotless interior is non-negotiable. Dirt, pet hair, dust, and spills accumulate in seats, footwells, and tight crevices—areas where traditional vacuum cleaners simply cannot reach. The Victorious Wireless Handheld Car Vacuum Hoover solves that problem with genuinely portable, powerful cordless cleaning engineered for automotive interiors. At just 550g and powered by a robust 4KPA motor, this handheld unit delivers consistent suction across carpets, upholstery, keyboards, and tight gaps. The 5000mAh lithium-ion battery provides up to 30 minutes of continuous use on a single charge—more than enough to detail a complete cabin. Crucially, it handles both dry debris and wet spills, with three interchangeable nozzles for different cleaning tasks. What sets this vacuum apart is its durability and versatility. The washable filter, durable construction, and wireless design mean you can tackle your cabin after a muddy adventure or a weekend of family travel without reaching for heavy corded equipment. Fully charged in just 2.5 hours via USB, it becomes an indispensable part of your detailing kit. What's Included 🔋 Portable Vacuum Cleaner Main unit with 5000mAh battery 🪥 Small Brush Nozzle For upholstery and tight spaces 🌪️ Suction Long Mouth Extended reach for floor mats and gaps 🧯 Extension Hose Reaches under seats and corners ⚡ USB Charging Cable Full charge in 2.5 hours Key Highlights 4KPA Powerful Motor – Thorough cleaning of floor debris, pet hair, dust, and fine particles Lightweight Design – Only 550g; ergonomic grip reduces hand fatigue during extended use 5000mAh Lithium Battery – Up to 30 minutes continuous runtime; 2.5-hour full charge Wet & Dry Capability – Handles both solid debris and liquid spills safely Three Nozzle Attachments – Brush, long mouth, and extension hose for diverse cleaning tasks 96% Cleaning Efficiency – High-performance suction captures 96% of particles Washable Filter – Durable, reusable filter reduces replacement costs Cordless Convenience – No tangled cables; clean anywhere in your vehicle or home Low Noise Operation – ≤70dB; won't disturb others while detailing 2-Year Battery Life – Reliable long-term performance; replaceable lithium cells Technical Specifications Specification Value Rated Voltage DC 12V Rated Power 120W Battery Type Lithium Ion 5000mAh Charge Time 2.5 hours (full) Runtime (Full Battery) Up to 30 minutes Battery Lifespan 1–2 years typical use Suction Power 4 KPA Noise Level ≤70 dB Usage Type Dry & Wet Dust Capacity ≥0.6L Cleaning Efficiency ≥96% Weight 550g (1.2 lbs) Vehicle Compatibility All Vehicles Using Your Vacuum Setup & Operation Charge the battery: Connect via USB cable. Full charge takes 2.5 hours. A full battery provides up to 30 minutes of continuous use. Select your nozzle: Choose the brush for upholstery, long mouth for crevices, or extension hose for under-seat access. Attachments clip firmly into place. Power on: Press the power button. Motor ramps to full 4KPA suction within seconds. Clean your interior: Start with seats and upper surfaces; finish with floor mats and footwells. The handheld design lets you maneuver into tight corners with ease. Empty the dust bin: After use, unclip the bin and tap debris into a waste bin. For wet debris, rinse and air-dry completely before recharging. Recharge: Return to USB charging between uses. Store in a cool, dry place. Filter is washable—rinse under water and let air-dry monthly. Tip: For spilled liquids, power down the unit immediately after wet use, empty the bin, and allow all components to air-dry for at least 4 hours before charging to prevent battery or motor damage. Keep Your Cabin Spotless Premium 4x4 ownership demands premium interior care. The Victorious Wireless Handheld Vacuum gives you the power and portability to maintain showroom condition anytime, anywhere—muddy countryside, dusty campsite, or your driveway at home. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ verified reviews 🚚 · Worldwide shipping via DHL, FedEx, UPS, TNT 💰 · 30-day money-back guarantee 📞 · +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Defender, Jaguar Land Rover (JLR), or any OEM manufacturer. Product compatibility is assessed independently. Always verify fitment before purchase. Modifications may void vehicle warranty; consult your retailer or manufacturer before installation. ```

Victorious Automotive · Defender L663 · Exterior Carbon Fibre Premium Carbon Fibre Rear Side Splitter — Land Rover Defender 110 L663 (2020+) Real carbon fibre precision-formed to the Defender 110's rear quarter — delivering motorsport-grade detailing with a factory-clean finish on every fitment. Defender L663 2020–2026+ 100% Carbon Fibre Rear Side Splitter High-Gloss Finish Direct Fitment UV Protected Left + Right Set Overview The Land Rover Defender 110 L663 is a vehicle that commands attention — a modern icon built on a legacy of capability, reimagined for those who want presence as well as performance. The rear quarter is one of its most defining angles, and it's precisely where detail-oriented owners choose to make a statement. Every line, every surface, every edge is an opportunity — and this splitter addresses it directly. The Victorious Premium Carbon Fibre Rear Side Splitter is constructed from authentic, woven carbon fibre — not a lookalike, not a wrap, and not an ABS facsimile. The visible weave is sealed beneath a high-gloss UV-resistant clear coat that protects the finish from the elements without compromising the depth and character of real carbon. It's the material choice of motorsport, applied to the road car you drive every day. Engineered specifically to the L663 body profile, this rear side splitter integrates cleanly into the vehicle's lower rear quarter without the need for cutting, grinding, or modification. Whether you're building out a full carbon kit or simply refining a single detail, this piece holds its own — and pairs flawlessly with rear diffusers, side skirts, and bonnet trims from the Victorious range. What's Included 🖤 Carbon Fibre Rear Side Splitters Left + Right — matched pair, one set per order 🔩 Fitting Hardware Bolts, fixings, or adhesive tape as applicable 📋 Installation Guide Step-by-step fitment reference included 🛡️ Protective Packaging Carbon surfaces protected for transit, worldwide shipping Product Highlights Authentic 100% real carbon fibre — not ABS, not wrapped, not simulated High-gloss UV-resistant clear coat prevents fading and surface degradation Precision-formed to L663 OEM body contours for seamless panel alignment Lightweight construction — adds visual weight without physical weight penalty Direct bolt-on or bond-on fitment — no cutting or permanent modification required Supplied as a matched left and right pair for balanced, symmetrical styling Compatible with all L663 110 trim levels including V8 and X-Dynamic Pairs cleanly with rear diffusers, skirts, and full Victorious carbon kits Impact-resistant weave construction — resilient against road debris and daily use Motorsport-inspired aesthetics without compromising the Defender's character Compatibility Vehicle Code Year Range Trim Fitment Land Rover Defender 110 L663 2020–2026+ S Direct Fit Land Rover Defender 110 L663 2020–2026+ SE Direct Fit Land Rover Defender 110 L663 2020–2026+ X-Dynamic SE Direct Fit Land Rover Defender 110 L663 2020–2026+ X Direct Fit Land Rover Defender 110 L663 2020–2026+ V8 / V8 Carpathian Direct Fit Land Rover Defender 90 L663 2020–2026+ All Trims Direct Fit Land Rover Defender 130 L663 2022–2026+ All Trims Not Compatible Defender 110 with Factory Body Kit L663 Any OEM Aero Pack Not Compatible Installation Notes 🔧 Difficulty: Intermediate  ·  ⏱ Estimated Time: 45–90 Minutes  ·  👤 1–2 People Recommended Thoroughly clean the rear lower quarter panel surfaces with isopropyl alcohol. Remove any wax, polish, or contaminants that may affect adhesion or alignment. Dry-fit both the left and right splitters to the vehicle without adhesive or bolts. Confirm panel alignment, gap consistency, and symmetry across both sides before committing. Mark the fitment position lightly with masking tape reference points on both sides to maintain consistency during final installation. Apply supplied adhesive tape or bolts in sequence, working from the centre outward to avoid misalignment or panel stress. Do not force fitment — the piece should seat naturally against the body line. Apply firm, even pressure across the full surface for a minimum of 60 seconds. For bond-on fitment, allow adhesive to cure for at least 24 hours before washing or driving at speed. Remove masking references, inspect panel gaps and surface alignment, and clean the carbon surface with a soft microfibre cloth. ⚠ Professional Installation Recommended: While this product is designed for direct fitment without modification, professional installation is strongly advised to ensure precise alignment, long-term bond integrity, and to avoid any potential damage to the vehicle's painted surfaces. Victorious Automotive accepts no liability for installation-related damage. Rear-End Precision. Carbon Fibre Authority. Every angle of your Defender tells a story. Make the rear quarter count — with genuine carbon fibre crafted to the same standard your vehicle was built to. Browse the full Defender L663 exterior range at Victorious Automotive and build the specification your Defender deserves. Shop Defender L663 Exterior → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended.