Automotive

Victorious · Jaecoo J7 · Exterior Styling ABS Carbon Fibre Fuel Tank Cover – Jaecoo J7 Premium ABS carbon-style fuel cap trim. Precision-fit, stick-on installation. Zero modifications required. Jaecoo J7 ABS Carbon Fibre Fuel Tank Cover OEM+ Styling Lightweight Overview The Jaecoo J7 deserves accessories that match its modern design language and refined presence on the road. This ABS Carbon Fibre Fuel Tank Cover is engineered to add a subtle yet impactful styling upgrade around the fuel cap area, giving your J7 a more premium, cohesive exterior appearance without aggressive modification. Manufactured from automotive-grade ABS plastic with a carbon fibre-inspired finish, this cover combines durability with lightweight construction. The precision-moulded design ensures a clean, factory-style fitment that looks intentional—not aftermarket. Weather-resistant materials mean it performs consistently across all climates and driving conditions. Whether you're building a complete carbon styling package or simply want to refine a single area, this fuel tank cover delivers OEM+ aesthetics in minutes. No drilling, no permanent changes, no regret. What's Included 📦 1x Fuel Tank Cover ABS carbon-style finish, pre-adhesive backed Product Highlights Designed specifically for Jaecoo J7 Premium automotive-grade ABS construction Carbon fibre-inspired aesthetic finish Lightweight and weather resistant OEM-style precision fitment Pre-applied automotive-grade adhesive No drilling or vehicle modification required Quick 5-minute stick-on installation Enhances exterior styling cohesion Durable and colour-stable design Compatibility Vehicle Model Year Compatibility Jaecoo J7 2024–present Direct Fit Please confirm your vehicle specification before purchase. Fuel tank cover design may vary by market and production year. Contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) if you're unsure about fitment. Installation Difficulty: Beginner | Time: 5 Minutes Open fuel filler door and inspect the fuel cap area for dust, dirt, or residue. Use a clean, dry cloth to thoroughly wipe down the fuel cap surround. Allow to air-dry completely. Carefully peel back the adhesive backing on the cover, starting from one corner. Align the cover over the fuel tank cap area, ensuring even spacing on all sides. Press firmly and evenly across the entire surface, working out any trapped air bubbles. Allow adhesive to cure for 24 hours before opening the fuel filler door again. Surface preparation is critical. Any residual dirt, wax, or sealant will prevent proper adhesion. Take your time with cleaning—it takes 30 seconds and ensures a lifetime of secure fitment. Important Notes Carbon Fibre Finish: This cover features an ABS carbon-style visual finish, not genuine carbon fibre. It delivers the aesthetic at a fraction of the cost and weight, with superior durability in real-world conditions. Colour Variance: Lighting, screen settings, and monitor calibration may cause slight perceived colour differences between product images and your physical item. The finish is colour-stable and UV-resistant. Adhesive Strength: Automotive-grade 3M adhesive backing is permanent once applied. Do not attempt to reposition after initial contact. Take time to align correctly before pressing down. Ready to Upgrade Your J7? Transform your fuel cap area with premium carbon-style styling. Clean installation, lasting durability, and the confidence that comes with OEM+ design. Your Jaecoo deserves it. Shop Jaecoo Accessories Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars ✓ 12,300+ Reviews ✓ 30-Day Guarantee ✓ Worldwide Shipping This product is designed and sold by Victorious Automotive Ltd. Victorious is not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile Co., Ltd., or any official manufacturer. All product names, logos, and brands are the property of their respective owners. Fitment compatibility is the responsibility of the buyer. Victorious recommends professional installation if you are unsure. See our full disclaimer for details.

Victorious Automotive · Jaecoo J7 · Exterior Fixed Side Steps for Jaecoo J7 Premium aluminium running boards with anti-slip surfaces for safer, easier vehicle access and refined SUV styling. Jaecoo J7 Aluminium Alloy Anti-Slip Surface OEM-Style Fitment Silver / Gloss Black Overview The Jaecoo J7 is a capable mid-size SUV engineered for families and adventure seekers alike. Its commanding presence and practical design demand accessories that match its rugged character without compromise. These Fixed Side Steps are precisely engineered to integrate seamlessly with your J7's architecture, providing both functional benefit and aesthetic refinement. Constructed from premium aluminium alloy with a durable anti-slip stepping surface, these running boards deliver exceptional accessibility for all passengers—whether navigating school runs or exploring challenging terrain. The fixed design eliminates movement and rattling, ensuring a solid, professional appearance that complements the J7's bold exterior lines. Available in elegant Silver or sophisticated Gloss Black, these side steps offer genuine vehicle protection against road debris while establishing the kind of refined, adventurous look that defines serious SUV ownership. Professional installation is recommended for optimal fitment and longevity. What's Included 📦 Full Side Step Set Left and right running boards complete 🔧 Mounting Brackets Heavy-duty brackets for secure fitment ⚙️ Installation Hardware Stainless steel fasteners and seals Product Highlights Engineered specifically for Jaecoo J7 fitment Premium aluminium alloy with weather-resistant finish Anti-slip stepping surface for safety Fixed running board—no moving parts Available in Silver or Gloss Black OEM-quality design and integration Improves passenger accessibility and comfort Protects lower body panels from road debris Enhances exterior appearance and presence Ideal for families and daily use Compatibility Variant Years Status Jaecoo J7 All Models 2023–Present Direct Fit Installation Notes Installation Overview Difficulty: Moderate | Estimated Time: 90–120 minutes | Tools Required: Standard socket set, drill (if drilling required), torque wrench Remove wheels and inspect mounting points on J7 frame for cleanliness and alignment. Position mounting brackets against vehicle body and mark drilling points if required. Drill pilot holes if necessary, following J7 specifications provided in fitment guide. Attach brackets using supplied stainless steel fasteners; torque to specification. Slide side step into mounting brackets and secure with all hardware provided. Check alignment, ensure no gaps, and verify anti-slip surface is clean and secure. Test stability by applying firm downward and lateral pressure to running board. Reinstall wheels and perform final visual inspection of both sides. Important: Professional installation is strongly recommended to ensure proper fitment, alignment, and structural integrity. Minor drilling or adjustment may be required depending on J7 specification or prior modifications. Always confirm vehicle compatibility before purchasing. Ready to Upgrade Your J7? Enhance your Jaecoo J7's accessibility, protection, and presence with premium Fixed Side Steps designed for owners who demand quality and reliability. Shop Jaecoo Accessories Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9★ from 12,300+ Reviews ✓ Worldwide Shipping (DHL, FedEx, UPS, TNT) ✓ Expert UK Support: +44 203 943 9919 Victorious Automotive is an independent specialist retailer. These products are not affiliated with, endorsed by, or produced by Jaecoo, Chery Automobiles, Land Rover, or Jaguar Land Rover plc. All trademarks remain the property of their respective owners. Product compatibility is provided as a guide only; buyers are responsible for confirming fitment before purchase.

Deployable / Electric Side Steps for JAECOO J7 Upgrade your JAECOO J7 with premium Deployable Electric Side Steps designed to enhance both practicality and appearance. These automatic running boards extend when the door is opened and retract seamlessly when closed, providing a clean OEM-style look while improving accessibility for passengers. Perfect for families, daily use and drivers wanting a more premium SUV experience, these electric side steps combine functionality with aggressive styling. Product Highlights Designed specifically for the JAECOO J7 Automatic deployable running boards Extends when doors open Retracts when doors close OEM-style fitment and operation Improves vehicle accessibility Premium aluminium construction Anti-slip stepping surface Weather resistant design Enhances exterior styling Heavy-duty motor system Integrated safety functionality Benefits Easier entry and exit for passengers Ideal for children and elderly passengers Cleaner appearance compared to fixed side steps Adds a premium luxury SUV feel Helps protect lower body panels from road debris Package Includes Full electric deployable side step kit Mounting brackets Wiring harness Control module Installation hardware Installation Professional installation is strongly recommended due to electrical wiring and vehicle integration requirements. UK installation support may be available through the approved S&H Auto Repairs installer network. Notes Please confirm vehicle compatibility before purchasing Installation time may vary depending on vehicle specification Professional coding/configuration may be required on some models

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Door Panel Covers – Jaecoo J7 Elevate your J7's cabin with premium carbon-style door panel trim that combines luxury styling with everyday durability. Jaecoo J7 ABS Material Carbon Fibre Finish Stick-On Install OEM Fitment Overview The Jaecoo J7 is a bold, modern SUV that deserves an equally sophisticated interior. These ABS Carbon Fibre Door Panel Covers transform the factory door trim with a sleek, sportier aesthetic that feels premium without the weight or cost of genuine carbon fibre. Manufactured from automotive-grade ABS plastic, each cover is precision-moulded to match the J7's door panel contours perfectly. The carbon-style finish delivers instant visual impact, while the durable material resists scratches, fading, and daily wear. Installation takes minutes—no drilling, no permanent modifications, no regrets. Whether you're refining a subtle upgrade or committing to a complete interior restyle, these covers are a proven foundation for customisation. They protect your original panels, look genuinely premium up close, and come backed by our 30-day money-back guarantee. What's Included 📦 Full Door Panel Set Complete coverage for all four doors 🎨 Carbon Fibre Finish Realistic texture, premium appearance 🔧 Adhesive Backing Pre-applied, automotive-grade formula 📋 Installation Guide Simple steps, no technical skill needed Product Highlights Designed specifically for Jaecoo J7 door panels Premium automotive-grade ABS construction Realistic carbon fibre-style finish texture Precision-moulded for OEM-level fitment Lightweight yet extremely durable material Protects original panels from scratches and UV damage Pre-glued with automotive adhesive backing Tool-free, no-drilling installation process Reversible—can be safely removed without residue Instantly elevates cabin aesthetics and perceived quality Compatibility Model Year Range Fitment Jaecoo J7 2023–Present Direct Fit Other Jaecoo models All years Not Compatible Other makes/models All years Not Compatible Always confirm your vehicle year and door panel shape before ordering. Contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if unsure. Installation Difficulty: Beginner | Time: 20–30 minutes Prepare the surface: Clean the entire door panel thoroughly with a microfibre cloth and mild panel cleaner. Remove any dust, dirt, or oils. Dry completely: Wait 5–10 minutes to ensure the surface is fully dry. Peel the backing: Carefully peel the protective adhesive film from the rear of each cover. Align and position: Starting at the top, gently align the cover with the door panel edge. Work your way down slowly. Press firmly: Once positioned, press the entire surface firmly with your hand or a soft roller to activate the adhesive. Allow to cure: Do not touch or apply pressure for at least 24 hours to allow full adhesion. Note: These covers use permanent adhesive. Removal is possible but may require heat and careful technique. Test fitment before committing to application. Not suitable for textured or curved door panels. Key Notes This is ABS carbon-style, not genuine carbon fibre Colour and finish may vary slightly by lighting and screen Designed for J7 models only—confirm compatibility before purchase Pre-installation surface prep is essential for lasting adhesion Remove protective film entirely before application Safe for all interior paint types and trim materials Complete Your J7 Interior These door panel covers are just the start. Pair them with our full Jaecoo J7 interior collection to create a cohesive, premium cabin that reflects your taste and attention to detail. Shop Jaecoo Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💰 30-day money-back guarantee 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaecoo, Chery Automobile Co., Ltd., or any official Jaecoo dealer network. All product names and vehicle marks are the property of their respective owners. This product is designed for enhancement and personalisation only.

Victorious · Jaecoo J7 · Exterior Styling ABS Carbon Fibre Door Handle Covers for Jaecoo J7 Premium ABS door handle covers with authentic carbon fibre styling—an instant, non-permanent exterior upgrade for your J7. Jaecoo J7 2024–2026 ABS Material Carbon Fibre Finish Stick-On Install Overview The Jaecoo J7 is a versatile, capable compact SUV built for drivers who demand both style and substance. Whether you're navigating urban streets or exploring beyond the tarmac, the J7 deserves premium touches that reflect your attention to detail. These ABS Carbon Fibre Door Handle Covers are precision-engineered to transform the appearance of your factory handles, delivering a sleek, aggressive carbon-inspired aesthetic without permanent modifications. Manufactured from automotive-grade ABS polymer, they're lightweight, weather-resistant, and finished to OEM standards—the ideal styling solution for J7 owners seeking an understated yet unmistakable upgrade. Installation is straightforward: clean, peel, and stick. No tools. No drilling. No dealer visits. In under five minutes, your J7 gains a refined, modern presence that commands attention and sets it apart from stock. What's Included 📦 Full Door Handle Set Complete ABS covers for all door handles 🧴 Pre-Applied Adhesive Automotive-grade backing for secure fit 📋 Installation Guide Step-by-step instructions included Product Highlights Designed specifically for Jaecoo J7 (2024–2026) Premium automotive-grade ABS construction Carbon fibre-style finish with realistic texture OEM-quality precision moulding Lightweight and impact-resistant Seamless factory appearance Pre-applied automotive adhesive backing No drilling or permanent modifications required Tool-free stick-on installation Weatherproof and UV-stable Compatibility Jaecoo Model Year Range Fitment J7 2024–2026 Direct Fit J7 EV 2024–2026 Direct Fit Other Jaecoo Models All years Not Compatible Note: Please verify your vehicle model and year before ordering. If unsure, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation DIY Installation – 5 Minutes Prepare the handles: Clean all four door handles with warm soapy water and dry thoroughly with a microfibre cloth. Remove any wax or protective coating with isopropyl alcohol. Position the covers: Align each cover carefully over the factory handle, checking fit and alignment before removing adhesive backing. Apply the covers: Remove the backing strip and press firmly onto the handle, working from centre outward to eliminate air bubbles. Set and cure: Allow 24 hours for adhesive to fully cure before operating doors normally. Final check: Inspect all seams and edges for secure adhesion; apply gentle pressure if needed. ⚠️ Important: Ensure handles are completely clean and dry before installation. Oil, dirt, or moisture will compromise adhesion. In cold weather (below 10°C), allow extra curing time. Why Choose Victorious At Victorious Automotive, we specialise in premium vehicle styling for owners who refuse to compromise. Our ABS Carbon Fibre Door Handle Covers are tested to withstand UK weather, UV exposure, and everyday use without degradation. Every product is backed by our 30-day money-back guarantee—if you're not satisfied, we'll refund you, no questions asked. We've earned a 4.9/5-star rating from over 12,300 verified reviews by prioritising quality, customer support, and fast worldwide shipping via DHL, FedEx, UPS, and TNT. Ready to Elevate Your J7 Transform your door handles in minutes. No tools. No fuss. Just premium styling that commands attention on every journey. Shop Jaecoo J7 Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 30-Day Money Back Worldwide Shipping Mon–Fri 9am–7pm Support Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaecoo, Chery Automobile Co., Ltd, or any official Jaecoo distributor. All product names and trademarks remain the property of their respective owners. Vehicle modifications are at the owner's risk; we recommend professional installation if uncertain.

Victorious · Jaecoo J7 · Interior Trim ABS Carbon Fibre Air Vent Covers – Jaecoo J7 Premium stick-on carbon fibre trim for an instant interior upgrade with zero drilling or permanent modification. Jaecoo J7 2023+ Carbon Fibre ABS Stick-On Installation OEM-Style Fit Overview The Jaecoo J7 is engineered for adventure, but its interior deserves the same premium attention as its powertrain. These ABS Carbon Fibre Air Vent Covers deliver that sportier, more refined aesthetic without compromise—or drilling. Manufactured from automotive-grade ABS with a flawless carbon fibre style finish, these trim pieces replace the stock air vent surrounds with precision-engineered covers that integrate seamlessly into your cabin. The modern grey carbon pattern adds visual depth, aggression, and that contemporary luxury touch that factory interiors often lack. Installation takes minutes. No tools required. No permanent modifications. Apply, press, and drive. The adhesive backing is engineered for automotive environments—durable against heat, humidity, and daily use—while remaining removable if you ever change direction. It's the fastest way to refresh your J7's interior without dealer pricing. What's Included 📦 2x Air Vent Covers Carbon fibre ABS trim pieces ✓ Pre-Applied Adhesive Automotive-grade backing Highlights Designed specifically for Jaecoo J7 Premium ABS construction Carbon fibre style finish Quick stick-on installation Automotive-grade adhesive backing Enhances cabin instantly OEM-style precision fitment No drilling or modifications Durable and lightweight Removable if desired Installation Difficulty: Easy | Time: 10–15 minutes Prepare: Clean the air vent surrounds thoroughly with a microfibre cloth. Remove any dust, oils, or residue. Position: Carefully align each vent cover over its corresponding vent surround. Apply: Starting from one edge, press the cover firmly onto the vent. Work across to ensure even adhesion. Set: Allow 24 hours for full adhesive cure before using interior controls or cleaning. Note: Confirm fitment with your specific J7 variant before purchase. Carbon fibre finish is ABS-style; not genuine carbon fibre. Colours may vary slightly depending on lighting and screen display. Compatibility Variant Fitment Jaecoo J7 (2023–2026) Direct Fit Other models Not Compatible Ready to Upgrade Your J7? Transform your interior in minutes. No dealer visit. No installation costs. Premium carbon fibre styling for the price of a coffee. Shop Jaecoo Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Jaecoo, Chery, or any OEM manufacturer. Product names and vehicle codes are used solely for identification and compatibility purposes. All trademarks and registered marks are the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Styling LED Front Grille V3 for Land Rover Defender 2020–2026 (L663) Transform the face of your Defender L663 with an integrated LED daytime running light grille that delivers a commanding, modern presence straight out of the box. Defender L663 2020–2026 Direct Fit LED DRL Front Grille V3 Design Exterior Styling Plug & Play Overview The Land Rover Defender L663 is one of the most recognisable vehicles on the road — a modern reinterpretation of an icon that carries serious intent. Its front fascia is the centrepiece of that identity, and for owners who want to push the aesthetic further, the factory grille leaves room on the table. The LED Front Grille V3 addresses that directly, replacing the standard unit with a purposefully designed alternative that reframes the Defender's face entirely. This is the third-generation iteration of our most popular Defender exterior upgrade. The V3 design incorporates a full-width LED daytime running light strip integrated cleanly into the grille structure itself, producing a continuous, high-output light signature that works in harmony with the Defender's existing DRL system. The result is a cohesive, factory-plausible aesthetic that reads as deliberate rather than aftermarket — precisely the kind of upgrade that turns heads without announcing itself. Designed and validated specifically for the L663 platform, the grille uses the factory mounting points for a direct, rattle-free fit. There are no custom brackets required and no modifications to your Defender's body or electrical system. The wiring integrates with your existing front lighting loom via a simple plug-and-play connector, making this a genuinely accessible upgrade regardless of your mechanical background. What's Included 🔲 LED Front Grille V3 Complete grille assembly with integrated LED strip 🔌 Plug & Play Wiring Harness Pre-terminated connector for OEM loom integration 🔩 Fitting Hardware Kit All clips, fasteners, and retention pins included 📄 Installation Guide Step-by-step printed instructions with QR video link Product Highlights V3 design — refined over two previous generations for fit, finish and light output Integrated LED DRL strip runs the full width of the grille aperture Plug-and-play wiring — connects directly to the factory front lighting loom Uses OEM mounting points — no drilling, no modifications, no rattles Activates automatically with ignition — no separate switch required High-output LED elements rated for all-weather and low-visibility conditions Finished in gloss black with precision-moulded surround detailing Compatible with both Defender 90 and Defender 110 L663 variants Reversible installation — original grille can be refitted at any time Designed, tested, and validated for the 2020–2026 Defender L663 platform Compatibility Model Code Years Fit Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2022–2026 Direct Fit Defender 90/110 (Pre-2020) L316 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Not Compatible Range Rover Vogue L460 / L405 All Not Compatible Installation Notes ⚙️ Difficulty: Beginner Friendly  ·  ⏱ Estimated Time: 45–60 Minutes Park the Defender on a flat surface, switch off the ignition, and allow the engine to cool completely before beginning. Open the bonnet and locate the retaining clips securing the factory front grille to the bumper surround — these are typically accessible from behind the front fascia. Carefully release each clip using a trim removal tool, working from the outer edges inward to avoid stressing the surround. Disconnect the factory grille and set it aside safely. Locate the front lighting loom connector behind the grille aperture. Connect the supplied plug-and-play harness to the OEM connector — the terminals are keyed and will only mate in the correct orientation. Route the harness neatly behind the fascia, securing any excess with the provided cable ties to prevent contact with moving components. Align the LED Front Grille V3 with the factory mounting aperture and press firmly from the centre outward until all clips engage and the grille sits flush. Connect the LED harness to the grille's input connector, switch on the ignition, and verify DRL operation before closing the bonnet. ⚠️ Important: Always disconnect the vehicle's battery negative terminal before working near any electrical connectors if you are unfamiliar with live-circuit handling. If your Defender is under manufacturer warranty, consult your retailer before modifying any exterior components. Installation Video Watch our full step-by-step installation walkthrough above. Pause, rewind, and follow along at your own pace. Upgrade Your Defender. Make It Yours. The LED Front Grille V3 is one of the most impactful single upgrades available for the Defender L663 — and it's available now with worldwide shipping and our 30-day money-back guarantee. Browse the full Defender L663 collection for complementary exterior accessories. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Evoque L538 · Instrument Cluster Digital Instrument Cluster & Speedo Upgrade — Range Rover Evoque L538 (2012–2019) Replace your factory analogue cluster with a full digital LCD display — bringing the cabin of your early Evoque firmly into the modern era with an OEM+ look that feels like it belongs there. Evoque L538 2012–2019 Full Digital LCD Plug & Play RHD Compatible Petrol & Diesel OEM+ Fitment High Resolution Display Overview The Range Rover Evoque L538 was a genuinely groundbreaking vehicle when it launched — bold styling, a premium cabin, and a driving experience that punched well above its segment. But interior technology has moved on considerably since 2012, and the original analogue instrument cluster can feel noticeably dated alongside more modern upgrades. If you've already fitted an Apple CarPlay head unit or refreshed the cabin with ambient lighting, the stock speedo is often the one element that still gives away the model year. This Digital Instrument Cluster Upgrade replaces the factory analogue binnacle with a sleek, full-resolution LCD display purpose-built to match the Evoque's interior proportions and OEM dashboard architecture. The result is a dashboard that reads as cohesive, modern, and deliberate — not pieced together. Clean animations, crisp typography, and a layout designed to mirror the aesthetic direction of newer Range Rover models make this feel like a factory option that simply wasn't available at the time. Beyond aesthetics, this upgrade consolidates all key vehicle data — speed, RPM, fuel level, coolant temperature, trip information, and additional vehicle status readouts — into a single high-resolution display that's genuinely easier to read at a glance. It's a meaningful quality-of-life improvement that also happens to transform the centrepiece of your driving environment. For any Evoque owner invested in their vehicle's long-term presentation, this is one of the highest-impact upgrades available. What's Included 🖥️ Digital Instrument Cluster Full LCD display unit, pre-configured for Evoque L538 🔌 OEM-Compatible Wiring Harness Plug-and-play connector for direct factory fitment 🔩 Mounting Hardware All fixings required for secure dashboard fitment 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Full digital high-resolution LCD instrument cluster Modern speedometer and RPM display with smooth animations Displays fuel level, temperature, trip data & vehicle status OEM-style housing — fits directly into factory binnacle recess Plug & play wiring connection (vehicle dependent) Compatible with right-hand drive UK specification vehicles Retains all core factory vehicle functions and warning indicators Contemporary UI styling consistent with newer Range Rover models Suitable for both petrol and diesel Evoque variants Pairs perfectly with CarPlay, ambient lighting & interior trim upgrades Compatibility Vehicle Year Range Drivetrain Fitment Range Rover Evoque L538 2012–2019 Petrol Direct Fit Range Rover Evoque L538 2012–2019 Diesel Direct Fit Range Rover Evoque L538 — Pre-Facelift 2012–2015 All Direct Fit Range Rover Evoque L538 — Post-Facelift 2015–2019 All Direct Fit Range Rover Evoque L551 (New Gen) 2019–Present All Not Compatible Range Rover Sport L320 2005–2013 All Not Compatible If your vehicle specification is not listed above, please contact our team on +44 203 943 9919 before ordering. Compatibility can vary by build date and regional specification. Installation Notes ⚙️ Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes Disconnect the vehicle battery and allow the system to fully power down before beginning any work. Remove the instrument binnacle surround trim carefully using trim removal tools to avoid marking the dashboard. Unplug the OEM wiring harness connector from the back of the factory cluster unit. Remove the original cluster from its mounting points, retaining all factory fixings. Connect the supplied wiring harness to the new digital cluster unit and route cleanly through the binnacle recess. Secure the new cluster into position using the original or supplied mounting hardware. Refit the binnacle surround trim and reconnect the battery. Power on the vehicle and verify all display functions, warning indicators, and vehicle data are operating correctly. ⚠ Please Note: Some vehicles may require a compatibility check prior to installation depending on build specification, ECU variant, or region. We recommend confirming fitment with our team if you are unsure. Professional installation is advised if you are not experienced with dashboard electronics. Pairs Well With 📱 Apple CarPlay Screen Upgrade Complete the infotainment transformation 💡 Ambient Lighting Upgrade Elevate the cabin atmosphere further 🖤 Carbon Fibre Interior Trims Premium material upgrade for dash and door panels 🌡️ Climate Control Screen Upgrade Modernise the lower HVAC display panel Upgrade Your Evoque Dashboard Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium interior upgrades. Questions before you order? Call us on +44 203 943 9919 — Mon–Fri, 9am–7pm. Shop All Evoque L538 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All brand names, vehicle model references, and trademarks are used for identification and compatibility purposes only and remain the property of their respective owners. Product compatibility information is provided in good faith; please verify fitment with our team prior to purchase if you have any uncertainty regarding your specific vehicle specification.

Victorious Automotive · Range Rover Sport L494 · Interior Upgrades Digital Instrument Cluster & Speedo Upgrade — Range Rover Sport L494 (2013–2017) Replace your factory analogue cluster with a full digital LCD display — giving your pre-facelift L494 the modern, high-resolution dashboard it always deserved. Range Rover Sport L494 2013–2017 Digital LCD Display Plug & Play Right-Hand Drive OEM+ Fitment Pre-Facelift Interior Upgrade Overview The Range Rover Sport L494 arrived in 2013 as one of the most desirable performance SUVs on the market — but the cabin of those early pre-facelift models now struggles to match the visual standard set by newer generations. The factory analogue-style instrument cluster in particular can feel distinctly out of place against owners who have since upgraded their infotainment, ambient lighting, or trim. The interior deserves to keep up. This digital instrument cluster upgrade is engineered specifically for the L494 Sport (2013–2017), replacing the original dial-based unit with a full high-resolution LCD display that mirrors the kind of digital cockpit experience found in current Range Rover models. It reads speed, RPM, fuel levels, engine temperature, trip data, and real-time vehicle information — all presented through smooth animations and a clean, premium interface. Designed with OEM-grade fitment tolerances and right-hand drive compatibility, this upgrade slots directly into your existing dashboard housing. It pairs naturally with Apple CarPlay screen upgrades, climate control display retrofits, ambient lighting kits, and carbon fibre trim — making it one of the most impactful single interior modifications available for the pre-facelift L494. What's Included 🖥️ Digital LCD Instrument Cluster Full-resolution display unit, pre-calibrated for L494 fitment 🔌 OEM-Compatible Wiring Harness Connects directly to factory loom — no cutting or splicing required 🔧 Mounting Hardware All fixings included for direct-fit installation 📋 Installation Guide Step-by-step fitting instructions included in the box Product Highlights Full digital high-resolution LCD instrument cluster display Displays speed, RPM, fuel level, temperature & trip data OEM-style design — no visible modification to dashboard housing Plug & play compatibility (vehicle-dependent — see notes) Right-hand drive UK specification compatible Smooth transition animations and modern UI interface Retains all core factory vehicle warning functions and data OEM+ appearance inspired by current Range Rover Sport models Enhanced premium cabin presence — pairs with other interior upgrades Compatible with petrol and diesel L494 variants (spec-dependent) Compatibility Vehicle Year Range Variant Fitment Range Rover Sport L494 2013–2017 3.0 SDV6 Diesel Direct Fit Range Rover Sport L494 2013–2017 4.4 SDV8 Diesel Direct Fit Range Rover Sport L494 2013–2017 3.0 V6 Supercharged Petrol Direct Fit Range Rover Sport L494 2013–2017 5.0 V8 Supercharged Petrol Direct Fit Range Rover Sport L494 2013–2017 SVR 5.0 V8 Supercharged Confirm Before Order Range Rover Sport L494 2018–2022 (Facelift) All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Installation Notes 📐 Difficulty: Intermediate  |  ⏱ Estimated Time: 1–2 Hours Disconnect the vehicle battery and allow a 10-minute discharge period before beginning work. Remove the steering column surround trim panels carefully using a trim removal tool — clips are plastic and will snap if forced. Unscrew and slide out the factory analogue instrument cluster from its housing, noting the orientation of the unit. Disconnect the existing OEM wiring connectors from the rear of the factory cluster. Connect the supplied wiring harness to the vehicle's factory loom — connectors are keyed and should click firmly into place. Seat the new digital cluster into the dashboard housing and secure using the provided mounting hardware. Refit the steering column surround trim, reconnect the battery, and power on the vehicle to test full display functionality. Verify all readings — speed, fuel, temperature, RPM — are displaying correctly before completing final panel reassembly. ⚠ Please Note: Compatibility can vary depending on vehicle specification, build date, and existing factory options. We strongly recommend confirming your VIN and trim level with our team before ordering — especially on SVR variants or vehicles with non-standard factory configurations. Some vehicles may require a brief software initialisation via OBD diagnostic tool. Professional installation is recommended if you are unfamiliar with dashboard removal. Upgrade Your L494 Interior The digital instrument cluster is one of the most visually transformative upgrades available for the pre-facelift Range Rover Sport. Pair it with a CarPlay screen, ambient lighting kit, or carbon fibre trim refresh for a complete cabin transformation. Shop All Range Rover Sport L494 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names, model names, and vehicle codes referenced are used solely for the purpose of product compatibility identification. Installation of aftermarket accessories should be carried out by a qualified technician where required. Always confirm fitment compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Vogue L460 · Exterior Carbon Fibre Hood Cover – Range Rover Vogue L460 (2022–2026) A precision-cut, dry carbon fibre hood cover engineered specifically for the L460 Vogue — delivering an unmistakable visual upgrade without compromising the vehicle's refined character. L460 Vogue 2022–2026 Carbon Fibre Hood Cover Exterior Upgrade Direct Fit Lightweight UV Lacquered Overview The fifth-generation Range Rover Vogue — chassis code L460 — represents Land Rover's most refined interpretation of the full-size luxury SUV to date. Its sculpted bonnet line and flush exterior surfaces demand accessories that match its level of precision. Aftermarket additions on a vehicle of this calibre must earn their place both visually and structurally, and this carbon fibre hood cover does exactly that. Crafted from genuine woven carbon fibre and finished with a multi-layer UV-resistant clear lacquer, this hood cover sits flush over the L460's existing bonnet panel with no cutting, drilling, or permanent modification required. The 2×2 twill weave pattern gives the piece its distinctive depth and gloss, complementing the bold stance of the new Vogue while subtly differentiating your vehicle from standard specification cars on the road. Beyond aesthetics, carbon fibre's inherent weight advantage contributes to a marginal but real reduction in overall nose weight — a characteristic appreciated by enthusiast owners who care about how their L460 feels as much as how it looks. Whether you're building a full carbon exterior specification or simply looking for a single high-impact exterior piece, this hood cover is a natural starting point. What's Included 🪝 Carbon Fibre Hood Cover 1× pre-formed panel, 2×2 twill weave, UV lacquered 🔩 Installation Hardware All clips, adhesive pads, and fasteners required for fitting 📋 Fitment Guide Step-by-step illustrated installation instructions 🧤 Protective Gloves For handling during install to avoid surface marks Product Highlights Genuine 2×2 twill weave carbon fibre construction throughout Multi-layer UV-stable clear lacquer protects against fading and yellowing Precision-moulded to match the L460 bonnet profile exactly No drilling, cutting, or permanent modification to the vehicle required Significantly lighter than OEM steel — reduces nose weight Compatible with both standard and long-wheelbase L460 body variants Deep gloss finish that complements all L460 exterior paint options High-temperature resistant resin substrate for year-round durability Flush-mount design preserves the factory bonnet's clean lines Fully removable and reversible — preserves original panel beneath Compatibility Vehicle Chassis Code Year Range Fit Range Rover Vogue (Standard WB) L460 2022–2026 Direct Fit Range Rover Vogue (Long WB) L460 2022–2026 Direct Fit Range Rover Autobiography L460 2022–2026 Direct Fit Range Rover SV L460 2022–2026 Direct Fit Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Defender L663 L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal tool, isopropyl alcohol, microfibre cloths Ensure the bonnet is fully cool and the surface is clean. Wash and dry the hood panel thoroughly before beginning. Wipe down the entire bonnet surface with isopropyl alcohol (IPA) to remove any wax, polish, or residue that could affect adhesion. Dry-fit the carbon fibre hood cover to the bonnet without removing the adhesive backing. Confirm alignment and panel gap consistency on all edges. Mark your alignment points using masking tape at the front and rear edges to act as guides during final placement. Peel the adhesive backing incrementally, pressing the cover down firmly from the centre outward to eliminate air pockets. Secure any additional clip points using the included fasteners, following the illustrated guide for your specific variant. Apply firm, even pressure across the full surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before washing the vehicle. ⚠ Note: Professional installation is strongly recommended if you are unfamiliar with automotive panel adhesive fitment. Incorrect placement during the adhesive stage may be difficult to reverse without risk of surface marking. If in doubt, contact a specialist detailer or bodyshop for assistance. Precision-Engineered for the New Range Rover Every Victorious Automotive exterior part is selected to meet the standard that L460 owners expect. Browse the full Range Rover Vogue L460 exterior collection or speak with our team — Mon to Fri, 9am–7pm on +44 203 943 9919. Shop L460 Exterior Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and chassis references are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L460 · Exterior Body Kit Carbon Fibre Rear Diffuser – Range Rover Vogue L460 (2022+) | Performance Body Kit Upgrade Motorsport-inspired real carbon fibre rear diffuser, precision engineered for the L460 platform to sharpen the Vogue's rear stance without compromising its luxury character. L460 2022–Present Real Carbon Fibre Rear Diffuser High Gloss Finish UV Protected Direct Fit OEM+ Styling Performance Exterior Overview The fifth-generation Range Rover Vogue L460 represents Land Rover's most sophisticated SUV to date — a vehicle that blends genuine luxury with commanding road presence. For owners who want to take that presence a step further, the rear end offers the most rewarding canvas. A purposeful rear diffuser is the single most impactful exterior modification you can make to the L460, transforming an already striking rear bumper into something that genuinely commands attention. This rear diffuser is constructed entirely from 100% genuine carbon fibre — not a carbon-look film, not a wrapped ABS panel — real woven carbon with a deep high-gloss UV-protective clear coat that sets it apart from lesser aftermarket alternatives. The weave is clean, consistent, and finished to a standard you'd expect from a coach-builder rather than a parts bin. It's the kind of detail that fellow enthusiasts will notice immediately. Developed exclusively for the L460 rear bumper architecture, every mounting point, every contour, and every edge profile has been mapped to the factory geometry. The result is a fitment that looks as though it left the production line that way — flush, purposeful, and entirely at home on a vehicle of this calibre. What's Included 🪶 Carbon Fibre Rear Diffuser 100% real woven carbon fibre, high-gloss clear coat finish 🔩 Mounting Hardware Vehicle-specific fixings and clips where applicable 📋 Fitment Guide Step-by-step reference for professional installation 🛡️ Protective Packaging Transit-safe foam-lined packaging to protect finish in delivery Product Highlights Manufactured from 100% genuine woven carbon fibre — not ABS with carbon wrap High-gloss UV-resistant clear coat prevents yellowing, fading, and cracking over time Precision engineered exclusively for the Range Rover Vogue L460 (2022–present) platform Lightweight construction reduces unsprung mass versus OEM plastic alternatives Motorsport-inspired rear diffuser profile adds visual aggression without altering ride height OEM+ aesthetic — elevates the factory design rather than replacing it with something incongruous Seamless integration with factory rear bumper lines, exhaust outlets, and sensor housings Compatible with standard and air suspension variants of the L460 Vogue Showroom-quality finish straight from the box — no additional prep or painting required Pairs perfectly with carbon fibre front splitters, side skirts, and mirror caps for a full body kit build Compatibility Model Platform Years Trim Fitment Range Rover Vogue L460 2022 – Present All Trims (SE, HSE, Autobiography, SV) Direct Fit Range Rover Vogue L405 2013 – 2021 All Trims Not Compatible Range Rover Sport L461 2022 – Present All Trims Not Compatible Range Rover Sport L494 2013 – 2022 All Trims Not Compatible Defender L663 2020 – Present All Trims Not Compatible Range Rover Velar L560 2018 – Present All Trims Not Compatible Specifications Attribute Detail Material 100% Real Carbon Fibre Finish High-Gloss UV Protective Clear Coat Placement Rear Bumper Diffuser Fitment Type Direct Replacement / Bolt-On Installation Professional installation recommended Hardware Included Yes (where applicable) Vehicle Platform Range Rover Vogue L460 (2022+) Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes Raise the rear of the vehicle safely on a quality lift or axle stands. Ensure the vehicle is on level ground and the air suspension is in transport mode if applicable. Remove the existing factory rear bumper diffuser panel by releasing the OEM clips and fasteners along the lower bumper edge. A trim removal tool is recommended to avoid scratching surrounding surfaces. Disconnect any factory undertray or skid plate sections that overlap the diffuser mounting area if present on your specific trim level. Test-fit the carbon fibre diffuser before final installation, confirming alignment with exhaust outlets, rear parking sensor housings, and bumper lower edge profile. Secure the diffuser using the supplied mounting hardware, working from the centre outward to ensure even seating. Do not overtighten — carbon fibre components require controlled torque at fixing points. Conduct a final visual check from a distance to confirm panel gaps are consistent across both sides before lowering the vehicle. ⚠ Professional Installation Recommended: While this diffuser is a direct-fit component, we strongly recommend installation by an experienced body shop or automotive trim specialist familiar with carbon fibre panels. Incorrect installation may result in fitment gaps, panel stress, or damage to the factory bumper. If you have any questions prior to installation, call our team on +44 203 943 9919. Complete Your L460 Build This diffuser is designed to work as a standalone upgrade, but it truly comes into its own as part of a wider exterior transformation. Browse our full Range Rover Vogue L460 exterior collection to explore matching carbon fibre front splitters, side skirts, mirror caps, and bonnet vents — all developed to the same fitment and finish standard. Victorious Automotive Specialists in premium exterior and interior upgrades for Range Rover, Defender, and Land Rover. Every product we stock is selected for OEM-level fitment, genuine materials, and lasting quality — because your vehicle deserves nothing less. Shop All L460 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL · FedEx · UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🌐 victorious.shop Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Product designs are developed independently and are not OEM Land Rover components.

Victorious Automotive · Range Rover Vogue L460 · Exterior Aero Carbon Fibre Rear Middle Wing Spoiler — Range Rover Vogue L460 (2022+) Tailgate Aero Upgrade A genuine carbon fibre mid-wing spoiler precisely engineered for the L460 platform, adding a layered performance aesthetic to the rear of your Range Rover Vogue without compromising its inherent luxury character. Range Rover Vogue L460 2022–2026 100% Real Carbon Fibre Middle Wing Spoiler High-Gloss UV Coat No Drilling Required 3M Bond-On Fit All Trim Levels Overview The fifth-generation Range Rover Vogue — L460 — is the most aerodynamically refined full-size luxury SUV Land Rover has ever produced. Its sculpted rear architecture, flush tailgate lines, and deliberately understated stance make it a canvas that rewards carefully chosen upgrades. The challenge is finding components that enhance without disrupting — pieces that feel as though they could have come from the factory. This Real Carbon Fibre Middle Wing Spoiler is positioned between the upper roof spoiler and the tailgate surface, introducing a distinct layered rear profile that adds visual depth and performance intent. Unlike decorative wraps or hydro-dipped plastic alternatives, this component is manufactured from genuine 2×2 twill weave carbon fibre, delivering the authentic texture, light play, and structural integrity that owners of this vehicle expect. The high-gloss UV-resistant clear coat ensures the finish holds its brilliance through years of exposure to sunlight and the elements. The result is a rear end that reads as more dynamic, more purposeful — a bespoke detail that complements the Vogue's luxury credentials rather than competing with them. Whether you're building toward a full carbon exterior look or simply want to distinguish your L460 from every other on the road, this middle wing spoiler is a precise, considered addition. What's Included 🏁 Carbon Fibre Middle Wing Spoiler 1× genuine carbon fibre unit, gloss finished 🔧 3M Automotive Adhesive Tape Pre-cut, automotive-grade bonding tape 📦 Optional Fitting Kit Included depending on production batch 📋 Installation Guidance Fitment instructions for clean alignment Product Highlights 100% genuine carbon fibre — not wrapped, not dipped, not imitation Authentic 2×2 twill weave pattern visible through crystal-clear coat High-gloss UV-resistant lacquer resists fading and yellowing Lightweight construction — adds presence without adding mass Precision-engineered for OEM fitment to L460 body lines Positioned between roof spoiler and tailgate for layered rear depth Bond-on fitment — zero drilling, zero permanent modification Automotive-grade 3M tape for a secure, rattle-free bond Compatible with all L460 trim levels including SV and Autobiography Pairs cleanly with other Victorious Automotive carbon fibre upgrades Vehicle Compatibility Vehicle Platform Years Trim Fitment Range Rover Vogue L460 2022–2026 SE Direct Fit Range Rover Vogue L460 2022–2026 HSE Direct Fit Range Rover Vogue L460 2022–2026 Autobiography Direct Fit Range Rover Vogue L460 2022–2026 First Edition Direct Fit Range Rover Vogue L460 2022–2026 SV Direct Fit Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Sport L461 / L494 All All Not Compatible Installation Notes Bond-On Fitment · Difficulty: Easy · Estimated Time: 30–60 Minutes Thoroughly clean the tailgate surface where the spoiler will sit using isopropyl alcohol or a panel wipe solution. Remove all wax, polish, and residue to ensure maximum adhesion. Perform a dry fit by holding the middle wing spoiler in position against the tailgate — check alignment with the body lines on both sides before committing to adhesive placement. Apply the supplied 3M automotive-grade adhesive tape along the bonding surface of the spoiler. Ensure full, even coverage with no air pockets or gaps. Position the spoiler carefully and press firmly into place with consistent pressure across the full length of the component. Hold for 30–60 seconds to initiate the bond. Allow 24 hours cure time before exposing to rain or a car wash. Avoid applying pressure to the spoiler during this period. ⚠ Professional Installation Recommended. While bond-on fitment is straightforward, precise alignment is critical on a vehicle of this calibre. We recommend having this component fitted by a professional detailer or bodywork specialist to ensure perfect symmetry and a finish consistent with the Vogue's OEM quality standards. Complete the Carbon Fibre Look This middle wing spoiler is designed to integrate seamlessly within a broader carbon fibre exterior transformation for the L460. Pair it with the following Victorious Automotive upgrades to achieve a fully coordinated, factory-coherent aesthetic: 🏎️ Carbon Fibre Rear Roof Spoiler Upper tailgate aero complement 🔲 Carbon Fibre Mirror Covers OEM-profile door mirror replacements 🔽 Carbon Fibre Rear Diffuser Lower bumper performance styling ◼️ Carbon Fibre Side Vents Lateral body detailing upgrade Browse the full Range Rover Vogue L460 collection → Built for the L460. Finished to Match It. Every carbon fibre component in our L460 range is selected to meet the same exacting standard as the vehicle it's designed for. If you have a question about fitment, finish, or pairing upgrades — our team is here. Shop All L460 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. Range Rover, Vogue, and L460 are trademarks of Jaguar Land Rover Limited. All references to vehicle makes, models, and codes are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue L460 · Exterior Styling Real Carbon Fibre Rear Spoiler — Range Rover Vogue L460 (2022–2026) A motorsport-grade carbon fibre boot lid spoiler that sharpens the L460's roofline silhouette with precision aerodynamic form and a deep, UV-stable gloss finish. L460 2022–2026 Real Carbon Fibre Rear Spoiler Gloss Finish Direct Fit Aerodynamic Exterior Styling All Trims Overview The fifth-generation Range Rover Vogue — codenamed L460 — represents the most refined interpretation of the Range Rover formula to date. Its sculpted rear end, flush surfaces, and wide horizontal tail lamps give it a presence that rewards carefully chosen enhancements. The OEM boot lid profile, while elegant, leaves room for those who want a sharper, more dynamic character without compromising the vehicle's inherent sophistication. This Real Carbon Fibre Rear Spoiler is precision-engineered to sit flush against the L460's boot lid contours, adding a subtle yet purposeful lip that draws the eye across the full width of the vehicle's tail. Constructed from genuine 2×2 twill-weave carbon fibre, each piece is laid up by hand and finished in a deep UV-resistant gloss lacquer — preserving the natural weave pattern and preventing yellowing or fading over time. The result is a component that looks as though it could have left the factory this way. Beyond aesthetics, the spoiler's geometry promotes mild downforce at the rear axle, contributing to a more planted feel at motorway speeds. It mounts directly to the OEM fixing points on the boot lid, requiring no drilling, no permanent modification, and no compromise to the L460's factory seals. Whether you're building a full carbon exterior package or simply refining the rear profile, this spoiler delivers exactly the finishing touch the L460 deserves. What's Included 🪄 Carbon Fibre Rear Spoiler Full-width boot lid spoiler in real 2×2 twill-weave carbon 🔩 Mounting Hardware OEM-compatible fixings and adhesive tape where required 📋 Installation Guide Step-by-step fitting instructions included in the box 🛡️ Protective Packaging Double-boxed with foam protection for safe transit Product Highlights Genuine 2×2 twill-weave real carbon fibre — not a vinyl wrap or ABS imitation UV-resistant gloss lacquer finish prevents yellowing and surface degradation Hand-laid construction ensures consistent weave alignment across the full panel Precision-cut to mirror the exact boot lid contour geometry of the L460 Lightweight carbon construction adds no meaningful weight penalty Mounts to OEM fixing points — no drilling or permanent modification required Compatible with all L460 trim levels including SE, HSE, Autobiography and SV Improves rear aerodynamic stability at higher motorway speeds Pairs seamlessly with other carbon fibre exterior additions for a cohesive look Supplied pre-drilled and pre-fitted with mounting hardware for a clean install Compatibility Model Code Years Trim Fitment Range Rover Vogue L460 2022–2026 SE Direct Fit Range Rover Vogue L460 2022–2026 HSE Direct Fit Range Rover Vogue L460 2022–2026 Autobiography Direct Fit Range Rover Vogue L460 2022–2026 SV Direct Fit Range Rover Vogue L460 2022–2026 Long Wheelbase (LWB) Direct Fit Range Rover Vogue L405 2013–2021 All Trims Not Compatible Range Rover Sport L461 / L494 All Years All Trims Not Compatible Range Rover Defender L663 All Years All Trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Trim removal tool, isopropyl alcohol, microfibre cloth Thoroughly clean the boot lid surface with isopropyl alcohol and allow to dry completely — any contamination will affect adhesion. Dry-fit the spoiler to the boot lid to confirm alignment and mark the mounting positions lightly with masking tape if needed. Where OEM fixing points are used, align the spoiler's pre-drilled holes and secure using the supplied mounting hardware. If using adhesive bonding, apply the provided double-sided tape to the underside of the spoiler base, remove the backing, and press firmly into position along the full length. Apply firm, even pressure across the spoiler for a minimum of 60 seconds to ensure full bond engagement. Allow the adhesive to cure for at least 24 hours before exposure to rain, washing, or sustained high-speed driving. ⚠ Note: Professional installation is strongly recommended to ensure correct fitment, panel gap consistency, and preservation of your factory boot lid finish. Improper installation may result in misalignment or adhesive damage to the paintwork. Precision Styling for the L460 Browse the full Victorious range of exterior accessories engineered specifically for the Range Rover Vogue L460 — from carbon mirror caps to front splitters and door sill plates. Shop All L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used solely for compatibility reference purposes.

Victorious Automotive · Range Rover Sport L461 · Exterior Styling Range Rover Sport L461 Forged Carbon Fibre SV-Style Accessory Kit (2023+) Transform your Range Rover Sport L461 with a complete SV-inspired body kit crafted from genuine forged carbon fibre — delivering a distinctive, lightweight upgrade that commands attention from every angle. Range Rover Sport L461 2023–2026 Forged Carbon Fibre SV-Style Design Exterior Kit Enhanced Aerodynamics Direct Fit Non-SV Models Overview The Range Rover Sport L461 represents a generational leap in Land Rover's performance SUV lineage — sharper proportions, a more driver-focused cabin, and a silhouette that rewards considered exterior modification. Owners who want to push the aesthetic further, without compromising the platform's innate sophistication, will find this kit a natural next step. This SV-Style Forged Carbon Fibre Accessory Kit is engineered specifically for the L461 generation (2023 onwards), bringing the aggressive, purposeful detailing of the range-topping SV variant to standard and SE trim owners. Every component is produced using authentic forged carbon fibre — a process that creates the signature marbled, irregular weave pattern that sets it apart visually from standard woven carbon, and structurally from lesser composite alternatives. Forged carbon fibre is not simply an aesthetic choice. The material's non-directional fibre structure delivers exceptional stiffness-to-weight ratios, meaning every piece added to your Sport reduces unsprung mass relative to OEM plastic equivalents while simultaneously elevating the vehicle's kerb presence. The result is a cohesive, factory-integrated appearance that looks as though it arrived this way from the Solihull production line. What's Included 🏎️ Complete SV-Style Body Kit Full forged carbon fibre exterior set in SV-inspired trim 🪝 Fitting Hardware All mounting clips and fasteners included for direct installation 📋 Installation Guide Step-by-step fitment instructions for each component 🛡️ Protective Packaging Components individually wrapped to prevent transit damage Product Highlights SV-inspired aggressive styling designed to mirror the top-spec L461 variant Authentic forged carbon fibre construction — not standard woven or painted ABS Distinctive marbled weave pattern unique to every individual piece Lightweight material reduces overall body panel mass versus OEM plastic Aerodynamic shaping tested to improve airflow management and stability Precision-engineered for seamless, gap-free fitment to L461 body lines UV-protective clear coat finish to prevent colour fade and surface degradation No permanent modifications required for a clean, reversible installation Compatible with factory parking sensors and camera systems Exclusively designed for non-SV L461 models — a direct aesthetic upgrade path Compatibility Model Generation Year Range Fitment Range Rover Sport SE L461 2023–2026 Direct Fit Range Rover Sport Dynamic SE L461 2023–2026 Direct Fit Range Rover Sport Dynamic HSE L461 2023–2026 Direct Fit Range Rover Sport Autobiography L461 2023–2026 Direct Fit Range Rover Sport SV L461 2023–2026 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Sport L320 L320 2005–2013 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Trim removal tools, microfibre cloths, isopropyl alcohol Thoroughly clean all mounting surfaces with isopropyl alcohol and allow to dry completely before beginning fitment. Dry-fit each forged carbon fibre component against the vehicle body to confirm alignment and check for any gaps before committing to final installation. Remove existing OEM trim pieces carefully using appropriate trim pry tools — avoid excessive force to prevent damage to body clips or painted surfaces. Follow the supplied installation guide to secure each component using the included hardware. Work progressively from front to rear for consistent panel alignment. Check all fixings are fully seated and each panel sits flush with adjacent body lines before completing the installation. Allow any adhesive-backed components to cure for a minimum of 24 hours before washing or driving at motorway speeds. ⚠ Note: Professional installation is recommended if you are unfamiliar with automotive trim removal. Forged carbon fibre is a precision-finished material — take care when handling components to avoid edge chips or surface scratches during fitment. This kit is designed exclusively for non-SV L461 models; do not attempt to fit to SV variants as body panel geometry differs. Elevate Your Range Rover Sport L461 Explore the full range of exterior upgrades for the Range Rover Sport L461 at Victorious Automotive — the UK's specialist in premium Land Rover and Range Rover accessories, trusted by over 12,300 owners worldwide. Shop Range Rover Sport L461 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Product imagery is for illustrative purposes only; actual finish and weave pattern of forged carbon fibre components may vary slightly between individual pieces due to the nature of the manufacturing process.

Victorious · Toyota Land Cruiser LC250 · Exterior Trim Side Fender Vent Trim – LC250 & Prado (2024+) Add sharper, factory-inspired side profile styling to your new Land Cruiser 250 with precision-engineered fender vents. LC250 / Prado 2024+ ABS Polymer OEM Fitment Adhesive Install Overview The Toyota Land Cruiser 250 is a formidable presence on any terrain, but its exterior demands refinement that matches its capability. These Side Fender Vent Trims are engineered to elevate the LC250's side profile with purposeful, aggressive styling inspired by factory high-specification models. Crafted from durable ABS polymer and finished in OEM-grade black, these vents integrate seamlessly with your Land Cruiser's existing body lines. They're designed to catch light, add visual depth, and create the impression of a more premium, performance-focused variant—without compromising authenticity. Installation is non-destructive: pre-applied automotive adhesive means no drilling, cutting, or permanent modification. Clean, install, and enjoy a more purposeful exterior within minutes. Perfect for owners who understand that great vehicles benefit from thoughtful, subtle upgrades. What's Included 🎁 Pair of Fender Vents Left & Right, pre-fitted adhesive Product Highlights Factory-inspired vent design elevates side profile OEM-style fitment tailored to LC250 body contours Premium ABS polymer, weather-resistant construction Suitable for daily driving and off-road conditions Non-destructive installation—no drilling or cutting Pre-applied automotive-grade adhesive Aggressive, sporty look that maintains OEM authenticity Improves perceived vehicle grade and presence Durable black finish resists UV and environmental wear Vehicle-specific fitment—not universal Compatibility Vehicle Year Fitment Toyota Land Cruiser 250 2024+ Direct Fit Toyota Land Cruiser Prado LC250 2024+ Direct Fit Land Cruiser 200 / LC200 2007–2022 Not Compatible Land Cruiser 300 / LC300 2022+ Not Compatible Installation 📋 Difficulty: Beginner | Time: 15–20 Minutes Clean the fender surface: Wipe the mounting area with warm soapy water, then dry thoroughly with a microfiber cloth. Use isopropyl alcohol for final surface prep. Peel the backing: Carefully remove the adhesive backing from the vent trim, starting at one corner. Align and position: Hold the vent against the fender to verify alignment with body lines and surrounding trim. Ensure it's level and symmetrical. Press firmly: Once positioned, press firmly across the entire surface for 30 seconds, working out any air pockets from the centre outward. Cure time: Allow the adhesive to cure for 24 hours before washing or aggressive driving. Avoid water contact during this period. Repeat for opposite side: Repeat steps 1–5 for the right fender vent. Note: Surface must be clean, dry, and at ambient temperature (15–25°C). Damp or cold conditions may compromise adhesion. If removal is necessary, use gentle heat (hair dryer) to soften adhesive before peeling. Technical Specifications Specification Detail Product Type Side Fender Vent Trim Material High-grade ABS Polymer Finish Black (OEM-style) Placement Front side fenders (pair) Installation Method Pre-applied automotive adhesive Fitment Type Vehicle-specific (LC250 only) Weather Resistance Tested for extreme temperatures, UV, moisture Ready to Upgrade Your LC250's Side Profile? These fender vents deliver the factory-plus look that separates enthusiasts from standard builds. Precision-engineered for your Land Cruiser 250, installed in minutes, zero compromises. Shop LC250 Collection Use code 22GET20 for 20% off any 2 items. Worldwide shipping via DHL, FedEx, UPS, TNT. 30-day money-back guarantee. ⭐ 4.9 / 5 stars – 12,300+ verified reviews 📞 +44 203 943 9919 – Mon–Fri 9am–7pm 🌍 Worldwide shipping – Fast & insured Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Toyota, Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners and used only for identification purposes. This product is designed as an aftermarket accessory upgrade and is not an official factory component. ```

Victorious · Toyota LC250 · Interior Storage Central Control Storage Box Organiser – Toyota Land Cruiser Prado LC250 / J250 Transform your centre console into premium organised storage with this vehicle-specific OEM-style organiser. LC250 / J250 2024–2025 ABS Plastic Black OEM Anti-Slip No Install Tools Overview The Toyota Land Cruiser Prado LC250 (2024–2025) is an exceptional platform for serious adventure, but every premium cabin benefits from thoughtful organisation. This Central Control Storage Box is engineered to fit the LC250's centre console perfectly, converting wasted space into accessible, secure storage for small essentials—cards, coins, keys, and personal items. Built from durable high-quality ABS plastic with a sleek black finish, this organiser maintains factory aesthetics while delivering real-world practicality. The anti-slip design prevents movement and rattling on rough terrain, and installation requires nothing more than dropping it into place—no drilling, no tools, no permanent modifications. For LC250 owners who demand both function and form, this storage solution is a subtle yet effective upgrade that speaks to the attention to detail that separates good vehicles from truly refined ones. What's Included 📦 Central Control Storage Box OEM-style black organiser Product Highlights Designed exclusively for LC250 / J250 centre console Seamless OEM-style black finish Transforms unused space into practical storage Anti-slip base prevents movement and noise Secure compartment for small items Durable, wear-resistant ABS construction Non-destructive, tool-free installation Factory-matched aesthetic inside and out Easy access to everyday essentials Perfect complement to other LC250 upgrades Compatibility Vehicle Model Code Years Fitment Toyota Land Cruiser Prado LC250 / J250 2024–2025 Direct Fit Important: This storage box is engineered specifically for the LC250 / J250 models. Please confirm your vehicle model and year before ordering. Not compatible with earlier Land Cruiser generations or other Toyota models. Installation Difficulty Level: Beginner Time Required: 2–3 minutes Tools Needed: None Open your LC250's centre console area Position the storage box into the factory compartment space Gently lower until it sits flush and level Test stability and anti-slip grip Close console and verify no rattling or movement Note: Console items shown in product photos are for illustration purposes only and are not included. Ensure the storage box is positioned level to prevent any movement during driving or off-road use. Ready to Upgrade Your LC250? Add premium organisation to your Land Cruiser Prado with this practical, factory-matched storage solution. Perfect for keeping your cabin tidy and essentials within reach, wherever the road takes you. Shop LC250 Accessories Use code 22GET20 to save 20% when you order any 2 items. ⭐ 4.9/5 stars · 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent accessory specialist and is not affiliated with Toyota, Land Rover, or Jaguar Land Rover. All vehicle names, model codes, and trademarks are the property of their respective manufacturers. This product is designed for aftermarket customisation and enhancement only.

Victorious Automotive · Toyota Land Cruiser LC250 · Window Regulators Electric Window Lifter Upgrade – Toyota Land Cruiser Prado LC250 / J250 (2024–2025) A precision-engineered window regulator upgrade built exclusively for the LC250/J250 generation — restoring smooth, silent, and reliable electric window operation in one direct-fit assembly. LC250 / J250 2024–2025 Electric Window Lifter Reinforced Metal Frame Plug & Play OEM-Style Fitment First Edition 1958 Edition Left & Right Variants Off-Road Ready Overview The Toyota Land Cruiser Prado LC250 / J250 represents a significant generational leap — a vehicle engineered for those who demand capability without compromise, whether on urban roads or demanding terrain. As with any vehicle used to its full potential, the small details matter just as much as the headline hardware. Window regulators are among the most-used mechanical components in the cabin, and when they begin to slow, bind, or fail entirely, it's an immediate quality-of-life concern. This Electric Window Lifter Upgrade is designed from the ground up for the 2024–2025 LC250 and J250 chassis, providing a reinforced, motor-driven regulator assembly that slots directly into the factory door card without modification. The upgraded motor and mechanism deliver noticeably smoother and quieter operation compared to worn factory units, and the reinforced metal frame construction ensures it holds up to daily use and the vibrations inherent to serious off-road driving. Whether you're replacing a failed unit or simply want to bring your window operation back to — or beyond — factory feel, this assembly offers OEM-level fitment with performance-grade internals. Installation is plug-and-play: no wiring modifications, no coding, and no specialist tools required beyond standard workshop equipment. What's Included 🔩 Window Lifter Assembly Full regulator unit with pre-installed motor where applicable ⚡ Upgraded Motor Unit Pre-fitted high-grade electric motor (variant dependent) 📋 Fitment Reference Compatibility guidance included with the assembly Product Highlights Smooth, near-silent electric window operation restored or upgraded High-grade upgraded motor for improved responsiveness and speed Reinforced metal frame construction for long-term durability OEM-style direct fitment — no cutting, trimming or modifications Plug-and-play electrical connection — no coding or rewiring required Built to withstand off-road vibration and daily operational stress Compatible with both First Edition and 1958 Edition LC250 variants Available in left-hand and right-hand side variants Designed exclusively for the LC250/J250 — not a generic fit Long service life supported by high-grade component selection Vehicle Compatibility Model Chassis Code Year Range Variant Fitment Toyota Land Cruiser Prado LC250 / J250 2024–2025 Standard Direct Fit Toyota Land Cruiser Prado LC250 / J250 2024–2025 First Edition Direct Fit Toyota Land Cruiser Prado LC250 / J250 2024–2025 1958 Edition Direct Fit Toyota Land Cruiser Prado LC150 / J150 2009–2023 All Not Compatible Toyota Land Cruiser LC300 / J300 2021–2025 All Not Compatible Toyota Land Cruiser LC200 / J200 2007–2021 All Not Compatible Installation Notes Installation Overview — Difficulty: Moderate · Estimated Time: 45–90 Minutes Per Door Disconnect the vehicle battery before beginning any door panel work to prevent accidental window operation during installation. Remove the interior door card carefully using appropriate plastic trim tools to avoid cracking the panel clips — LC250 door cards use a combination of screw fixings and push-fit clips. Peel back the door membrane to access the regulator mounting area. Take care not to tear the membrane seal as it prevents moisture ingress. Disconnect the factory window lifter electrical connector and unbolt the existing regulator assembly from the door shell — typically four to six bolts depending on the door position. Transfer the window glass to the new regulator by sliding the glass channel clips into the upgraded unit and securing as per the factory fixings. Bolt the new assembly into place using the factory mounting holes, reconnect the electrical plug, and test operation before reassembling the door membrane and card. Restore the door panel, reconnect the battery, and cycle the window fully up and down several times to confirm smooth and consistent operation. Important: Professional installation is recommended if you are unfamiliar with door card removal on the LC250/J250. Incorrect reassembly of the door membrane can lead to water ingress. Always verify your door side (left or right, front or rear) before ordering — check the variant selector carefully. Complete Your LC250 Build Explore the full range of Toyota Land Cruiser LC250 accessories at Victorious Automotive — trusted by 12,300+ owners worldwide with a 4.9-star verified rating. Shop All LC250 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation, Land Rover, Jaguar Land Rover (JLR), or any associated OEM brand. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover Sport L494 / Vogue L405 · Interior Trim Carbon Fiber Seat Trim for Range Rover Sport L494 & Vogue L405 (2014–2017) A precision clip-on carbon TPU seat trim that delivers the SVR aesthetic to your Sport or Vogue cabin — no tools, no fuss, no compromise. L494 Sport L405 Vogue 2014–2017 Carbon TPU Clip-On Fit SVR-Inspired Look Laser-Cut Precision No Drilling Required Interior Upgrade Overview The Range Rover Sport L494 and Vogue L405 set a benchmark for refined performance SUVs — interiors designed with intent, materials chosen for presence. But for owners who want that extra edge of visual aggression, the standard seat surround trim leaves something to be desired. The factory finish is clean, but it doesn't speak to the SVR character that so many Sport and Vogue owners aspire to. Our Carbon Fiber Seat Trim is a direct response to that. Precision laser-cut from durable carbon TPU, each trim is engineered to clip cleanly over the existing seat trim panel, transforming the look of the seat surround area without any permanent modification. The carbon weave texture adds depth and tactility to the cabin, elevating the visual atmosphere around the seat in a way that feels factory-fitted — not aftermarket. This is the kind of detail that enthusiasts notice. Whether you're building toward a full SVR-inspired interior or simply adding considered touches to an already impressive cabin, the carbon seat trim delivers a confident upgrade with zero risk to your vehicle. Two trims are included per order — one for each front seat — ensuring a consistent, symmetrical transformation across the cabin. What's Included 🪑 Carbon Fiber Seat Trim ×2 One per front seat — matched pair for symmetrical fitment 📋 Fitment Guide Step-by-step installation reference included Product Highlights Precision laser-cut carbon TPU for exact factory-panel alignment Clip-on installation — no tools, adhesive, or drilling required Designed to achieve the coveted SVR interior aesthetic Durable TPU construction resists heat, UV fade, and daily wear Deep carbon weave texture adds visual depth and tactility Seamless integration with existing seat surround panels Supplied as a matched pair for consistent front-cabin fitment Fully reversible — original trim remains completely undamaged Compatible with both Sport L494 and Vogue L405 seat configurations Lightweight construction adds zero perceptible bulk to seat area Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2018–2022 Verify Before Purchase Range Rover Sport SVR L494 2014–2017 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Unsure about your specific build or seat variant? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Begin with the seat in its normal upright position. Ensure the seat surround area is clean and dry — a quick wipe with a microfibre cloth removes any dust or residue that could affect the clip seating. Remove the carbon seat trim from its packaging and orient it correctly against the existing factory panel. The trim is directional — match the contour profile to the panel shape before applying pressure. Align the clip points along the top edge of the trim with the corresponding edges of the factory panel. Start from one end and work progressively across, pressing firmly but evenly until each clip engages with a tactile click. Run your fingers along the full perimeter of the trim to confirm all clips have seated fully and the edges are flush with the surrounding surfaces. There should be no flex or movement in the installed trim. Repeat the process for the second seat. Step back and inspect both trims from a natural seating angle — the result should appear factory-fitted with no visible gaps or misalignment. ⚠ Important: Confirm your exact model year and seat variant before installation. Trim profiles can vary between production runs within the same model year. If the trim does not align naturally during dry-fit, do not force the clips — contact our support team for guidance. Forcing an incompatible fit may damage the factory panel. Upgrade Your Sport or Vogue Interior Explore the full range of interior and exterior accessories for the Range Rover Sport L494 and Vogue L405 — engineered to the same standard of precision and quality. Shop Range Rover Sport L494 → Shop Range Rover Vogue L405 → Buying two items? Use the code below at checkout for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Running Boards & Side Steps Deployable Electric Side Steps – Land Rover Defender L663 110 (2020+) Power-retractable aluminium side steps engineered specifically for the Defender 110 L663 — deploying automatically on door open, retracting flush with the body on close, for a seamless, factory-quality experience every time. Defender L663 2020–2025 Defender 110 Electric Deployable Heavy-Duty Aluminium Plug-and-Play Wiring Anti-Slip Surface OEM-Style Fitment Ground Clearance Preserved Overview The Defender 110 L663 is engineered to sit tall — and that elevated ride height is a core part of what makes it one of the most accomplished and imposing 4x4s available today. Whether it's the standard turbodiesel or the 5.0-litre V8, every variant commands the road by virtue of its stature. But that same stature can make daily entry and exit genuinely cumbersome — for drivers, passengers, and families alike. The step from kerb to cabin is a long one, and over time, it adds up. These Deployable Electric Side Steps are the intelligent answer. Engineered specifically around the Defender 110 L663's rocker panel geometry and OEM mounting architecture, they integrate into the vehicle's existing door trigger circuit and operate entirely automatically. Open any door and the steps extend outward and downward within seconds, providing a wide, textured, anti-slip platform. Close the door and they retract cleanly flush with the body — completely out of sight, out of the way, and out of the vehicle's off-road path. Constructed from heavy-duty aluminium with a corrosion-resistant satin finish, these steps are built for the Defender's real-world environment: muddy lanes, coastal roads, urban streets, and everything between. The plug-and-play wiring harness requires no permanent modifications, no chassis drilling, and no aftermarket control modules. They connect, they work, and they continue to work — silently and reliably — every time you open a door. What's Included 🦶 Side Step Units × 2 Left and right, pre-assembled and ready to mount ⚙️ Electric Motors × 2 One per side, pre-mounted to the step arm 🔌 Plug-and-Play Wiring Harness Door trigger connectors — no cutting or splicing 🔩 Mounting Brackets & Hardware All fixings for OEM rocker panel mounting points 🛡️ Wiring Clips & Conduit For clean, protected cable routing through the sill 📄 Installation Guide Step-by-step printed instructions included Product Highlights Fully automatic operation — deploys and retracts with every door open and close cycle Heavy-duty aluminium construction rated for continuous daily use and real off-road conditions Wide, textured anti-slip step surface for confident footing in all weather Retracts completely flush with the body — ground clearance and off-road geometry fully preserved Plug-and-play wiring taps directly into the factory door trigger circuit No permanent modifications, no drilling to the chassis or rocker panel required Silent motor operation — no grinding, no audible lag, no cabin noise Satin aluminium finish resists corrosion, road salt, mud, and UV degradation Designed exclusively for the Defender 110 L663 — precise OEM mounting point fitment Professional-quality installation achievable in 2–4 hours with basic hand tools Compatibility Model Generation Years Fitment Defender 110 L663 2020–2025 ✓ Direct Fit Defender 110 V8 L663 2021–2025 ✓ Direct Fit Defender 90 L663 2020–2025 Not Compatible Defender 130 L663 2022–2025 Not Compatible Defender (pre-2020) L316 — Not Compatible Engineered for the Defender 110 five-door body only. Compatible across all trim levels including Standard, S, SE, HSE, X, and X-Dynamic. Not suitable for the 90 three-door or 130 six-door variants due to differing rocker panel geometry, wheelbase dimensions, and door configurations. If you are unsure of your specific variant, please contact our team before ordering. Installation Notes ⚡ Medium–Professional · 2–4 Hours · Basic Hand Tools Required Prepare the vehicle. Park on a clean, level surface with all doors closed and the engine off. You will be working beneath and alongside the vehicle, so a flat driveway or workshop floor with good lighting is ideal. Have a jack and axle stands available if additional underbody access is required. Remove the factory rocker sill trims. The lower sill trim panels on the Defender 110 L663 are retained by perimeter clips and require no tools to remove. Work carefully around each clip using a plastic trim removal tool to avoid marking or cracking the panels — you will be refitting these at the end. Mount the step brackets to the rocker panel. Using the supplied bolts and hardware, secure the mounting brackets to the existing OEM threaded fixing points along the underside of the rocker panel. No drilling is required — all fixing points are factory pre-existing locations. Attach the step arm and motor assemblies. Slide the pre-assembled step arm and motor units onto the mounted brackets and secure with the supplied fasteners. Orient each motor inward toward the vehicle sill, ensuring the step arm articulates freely through its full deployment arc before final tightening. Route and connect the wiring harness. Feed the supplied harness through the sill cavity and up to the door jamb area on each side. Connect the plug-and-play connectors to the factory door trigger wiring — no cutting, crimping, or splicing is required. Secure all excess cabling using the included clips and conduit to prevent contact with moving components. Test operation before completing the install. Reconnect the battery, then open each door individually to confirm the corresponding step deploys fully and retracts cleanly on close. Adjust the motor arm deployment angle if needed for clearance. Once satisfied, refit the sill trim panels to complete the installation. Note: We recommend this installation be carried out by a competent and experienced DIYer or a qualified Land Rover specialist. Incorrect wiring harness routing can result in chafing against articulating components over time. If you would prefer professional fitting, our team can recommend a vetted installer in your area — call us on +44 203 943 9919, Monday to Friday, 9am–7pm. Step Up. Without Stepping Down. The Defender was built to go anywhere and look exactly like it can. These electric side steps make sure everyone gets in comfortably — without the vehicle ever compromising its profile when parked, or its capability when the terrain gets serious. They disappear when you don't need them, and reappear the moment you do. Backed by a 30-day money-back guarantee, 4.9★ from 12,300+ verified reviews, and worldwide shipping via DHL, FedEx, UPS and TNT. Shop the Full Defender L663 Collection → Use code 22GET20 for 20% off any two items ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 Expert advice Mon–Fri, 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover or Jaguar Land Rover Limited in any way. All vehicle model names, generation codes, and identifiers are referenced solely for product fitment and compatibility identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Upgrades Deployable Electric Side Steps – Land Rover Defender 90 L663 (2020–2024+) Motorised steps that extend on door open and retract flush on close — enhancing accessibility without sacrificing ground clearance or the Defender's commanding stance. Defender L663 90 Model Only 2020–2024+ Electric Deployable Auto Retract Matte Black 300kg Load Rated Weather Sealed Direct Fit Overview The Land Rover Defender 90 L663 is built to go further, look bolder, and perform harder than almost anything else on the road or off it. Its raised ride height is an asset on the trail — but for daily use, getting in and out with ease, especially for passengers, can be a genuine inconvenience. That's precisely the problem these Deployable Electric Side Steps are engineered to solve. Designed and fitment-matched exclusively for the Defender 90 L663 (2020 onwards), these motorised steps integrate seamlessly with your vehicle's door trigger signal. The moment a door is opened, the steps extend smoothly and quietly into position. When the doors close, they retract flush to the vehicle body — restoring your ground clearance and keeping the Defender's silhouette exactly as it should be. No permanent protrusions, no compromise on approach angles. Finished in a sleek matte black that pairs naturally with the Defender's factory arches and trim, these steps add a layer of purposeful refinement rather than afterthought. Whether you're loading up for a weekend away, helping children or older passengers aboard, or simply want a cleaner entry experience every day, this is one of the most functional exterior upgrades available for the modern Defender. What's Included 🦶 Side Steps (Pair) Left & right, matte black finish ⚙️ Electric Motors One per side, heavy-duty rated 🔩 Mounting Brackets Vehicle-specific, pre-formed steel 🔌 Wiring Harness Full plug-and-play loom included 🧠 Control Module Door-signal logic controller 🔧 Hardware Kit All fixings, bolts & fasteners 📋 Installation Guide Step-by-step printed instructions Product Highlights Automatically extends when either front or rear door is opened Auto-retracts flush on door close — zero permanent ground clearance loss Model-specific fitment engineered for Defender 90 L663 only Heavy-duty construction rated to 300kg per step Weather-sealed motors and control unit for all-season reliability Matte black finish matched to factory arches and cladding Quiet, smooth motor operation — minimal deployment noise Preserves aerodynamics and approach angle when retracted Wiring harness connects to existing door signal circuit — no modification required Full fitting kit included — no additional parts needed Compatibility Model Code Years Fitment Defender 90 L663 2020, 2021, 2022, 2023, 2024+ Direct Fit Defender 110 L663 2020–2024+ Not Compatible Defender 130 L663 2022–2024+ Not Compatible Defender 90 (Classic) Pre-L663 Pre-2020 Not Compatible Installation Notes Installation Overview — Difficulty: Intermediate · Estimated Time: 3–5 Hours Raise and safely support the vehicle to access the underside along the sill area. Position and bolt the vehicle-specific mounting brackets to the chassis using the hardware provided — no drilling required on 90 L663 models. Attach the electric motors and step arms to the mounted brackets and secure all fixings to torque spec. Route the wiring harness from each motor through the sill channel toward the control module mounting location. Connect the control module to your vehicle's door signal wire (identified in the installation guide) and to a switched 12V power source. Test deployment and retraction on both sides before final cable management and tie-off. Lower the vehicle, confirm ground clearance is unaffected in the retracted position, and verify smooth step operation through multiple door cycles. ⚠ Professional Installation Recommended. This product requires connection to your vehicle's door signal circuit and 12V power supply. Incorrect wiring may affect vehicle electronics. If you are not confident working with automotive electrics, we strongly recommend professional fitting by a qualified auto electrician or 4x4 specialist. Built for the Defender. Backed by Victorious. Every product we offer is selected for fit, finish, and function — not just aesthetics. These Deployable Electric Side Steps are one of the most practical upgrades you can make to the Defender 90, and they're engineered to last as long as the vehicle itself. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or representing Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Range Rover L460 · Exterior Styling SV Style Electroplated Bronze Front Grille – Range Rover Vogue L460 (2022+) A direct-fit, SV-inspired mesh grille in a rich electroplated bronze finish — purpose-built to elevate the front-end presence of your L460 Vogue without modification. Range Rover L460 2022–2026 Electroplated Bronze SV Style Mesh ABS Construction Direct Fit No Modifications Required Exterior Upgrade Overview The fifth-generation Range Rover Vogue — the L460 — arrived with one of the most refined and restrained front-end designs in the model's history. That clean, architectural face is exactly what makes it such a compelling canvas for considered styling upgrades. Owners who want to move away from the factory chrome finish without compromising the vehicle's luxury character have very few genuine options — until now. This SV Style Electroplated Bronze Front Grille draws its design language directly from the high-specification Range Rover SV, featuring the same precise mesh pattern and bold surround proportions that define that variant's road presence. The electroplated bronze finish adds warmth and depth that standard gloss or chrome alternatives simply can't replicate — it reads as both premium and purposeful in equal measure. Engineered as a direct replacement for the factory grille on all standard L460 Vogue models from 2022 onwards, this grille fits precisely into the existing mounting points with no cutting, drilling, or vehicle coding required. Whether you're building a full bronze exterior package, complementing aftermarket wheels, or simply refreshing a tired front end, this is one of the most impactful single upgrades available for the L460. What's Included 🪟 SV Style Front Grille Electroplated bronze finish with full mesh insert pre-installed 🔩 Mounting Hardware Clips and fixings compatible with L460 factory mounting points 📋 Fitment Guide Reference instructions included for straightforward installation 🛡️ Protective Packaging Foam-padded and double-boxed to ensure damage-free delivery Product Highlights Electroplated bronze finish with genuine metallic depth — not paint or film SV-inspired open mesh design replicates the flagship model's front-end aesthetic Direct OEM-position fitment — no cutting, drilling, or modifications needed High-grade ABS plastic construction — lightweight, impact-resistant, and weatherproof UV-stable surface treatment resists fading, cracking, and discolouration over time Pre-installed mesh insert — arrives ready to fit straight from the box Ideal base for bronze, satin, or dark exterior styling packages on the L460 Removes factory chrome surround for a more contemporary, purposeful appearance Compatible with all standard front-bumper configurations on the L460 Vogue Precision-moulded for flush panel alignment and a factory-quality finish Compatibility Model Code Year Range Trim Fitment Range Rover Vogue L460 2022, 2023, 2024, 2025, 2026 Standard / SE / HSE / Autobiography Direct Fit Range Rover Vogue SV L460 2022–2026 SV (factory SV grille fitted) Not Compatible Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–75 minutes  ·  Tools Required: Trim removal tools, T20 Torx bit Ensure the vehicle is parked on a level surface with the engine off and cooled down before beginning any work around the front bumper. Using appropriate trim removal tools, carefully disengage the factory grille from the bumper assembly by releasing the retaining clips along the upper and lower edges. Disconnect any parking sensor wiring looms or camera connectors if routed through or behind the factory grille — take photographs before disconnecting to aid reassembly. Transfer any sensors, brackets, or hardware from the original grille to the new SV Style unit where required, ensuring all clips seat securely. Align the replacement grille into position, pressing firmly along the clip points until each one audibly engages — work progressively from the centre outward. Reconnect all sensor wiring and perform a full walk-around to verify flush panel alignment before moving the vehicle. ⚠ Professional fitting is strongly recommended. If your L460 is equipped with a front-facing camera, active cruise sensors, or parking assist modules mounted within the grille assembly, these should be reconnected and tested by a qualified technician. No vehicle coding is required for this grille. The Right Finish. The Right Fit. If you're building out a bronze styling package for your L460 or simply want to move on from the factory chrome, this grille is one of the most effective single changes you can make. Browse the full L460 exterior collection for matching pieces — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for fitment advice. Shop All L460 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm This product is an aftermarket replacement pattern part. Victorious Automotive is not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of describing product compatibility. This is not a genuine Land Rover or JLR product.

Victorious Automotive · Range Rover L460 · Exterior Styling SV Style Gloss Bronze Front Grille – Range Rover Vogue L460 (2022+) A bold, SV-inspired mesh grille finished in warm gloss bronze — purpose-built as a direct replacement for the Range Rover L460 Vogue, delivering a distinctive front-end transformation without modification. Range Rover L460 2022–2026 Gloss Bronze SV Style Mesh ABS Plastic Direct Fit No Modifications Exterior Upgrade Overview The Range Rover L460 Vogue is one of the most architecturally refined SUVs ever produced — a vehicle where every surface detail carries weight. The factory grille, while elegant, leaves many owners looking for something that leans further into presence and personality. The SV edition set the benchmark for that, and this grille brings that same visual authority to the standard L460 front end. Finished in a rich gloss bronze, this replacement pattern grille is modelled on the distinctive mesh design found on Range Rover SV variants. The warm metallic tone sits beautifully against the L460's clean body lines — whether your vehicle is finished in a dark paint like Santorini Black or Carpathian Grey, or a lighter shade such as Fuji White. It's a considered choice for owners who want to stand apart from the standard specification without compromising the vehicle's innate sense of sophistication. Constructed from durable ABS plastic and finished to a high-gloss UV-stable standard, this grille is built to perform in all conditions. It slots directly into the factory mounting points, requiring no cutting, coding, or permanent alteration — making it a reversible upgrade that's as practical as it is striking. What's Included 🏁 SV Style Front Grille Gloss bronze mesh — 1 unit 🔲 Pre-Installed Mesh Insert Integrated SV-pattern mesh surround 🔩 Mounting Clips / Fixings Factory-style retention hardware 📋 Fitting Reference Guide Basic installation reference included Product Highlights SV-inspired mesh pattern adds a more aggressive, purposeful front-end stance Gloss bronze finish — rich, warm tone that complements both dark and light paint colours UV-stable surface treatment resists fading, oxidation, and weathering over time ABS plastic construction — impact-resistant, lightweight, and fully weatherproof Direct bolt-on fitment — aligns to factory mounting points with no modifications required No coding or electrical changes needed — purely mechanical swap Reversible upgrade — original grille can be refitted at any time Ideal for bronze, copper, or warm-tone exterior styling packages Suitable for de-chrome builds or bronze accent styling themes Professionally recommended fitting ensures flush, gap-free finish Compatibility Model Code Year Range Trim Fitment Range Rover Vogue L460 2022, 2023, 2024, 2025, 2026 Standard / SE / Autobiography Direct Fit Range Rover Vogue SV L460 2022+ SV (factory SV grille fitted) Not Compatible Range Rover Sport L461 2022+ All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2017+ All Not Compatible Installation Notes 🔧 Difficulty: Moderate  |  Estimated Time: 60–90 Minutes  |  Tools Required: Trim removal tools, flathead, torx set Open the bonnet and secure it fully. Disconnect the battery negative terminal as a precautionary measure before working near the front bumper assembly. Using trim removal tools, carefully unclip the factory grille surround from the upper bumper assembly. Work from the outer edges inward to avoid cracking the factory clips. Locate and release the retaining clips or screws securing the original grille to the front bumper — typically accessed from behind the bumper fascia. Remove the factory grille fully. Set aside if you wish to retain it for reinstallation. Align the new SV Style Gloss Bronze grille to the factory mounting positions, ensuring even spacing across the full width before applying pressure. Press firmly and evenly to engage each retention clip. Verify a flush, gap-free fit across all edges before completing the installation. Reconnect the battery, recheck alignment under good lighting, and inspect from a distance to confirm symmetry. ⚠ Fitting Recommendation: While this is a direct replacement, professional fitting is recommended to ensure correct alignment and to avoid damage to surrounding trim. Incorrect clip engagement can result in panel gaps or rattling at speed. If you're unfamiliar with front bumper trim removal on the L460, we advise booking with a trusted bodyshop or Land Rover specialist. Redefine the Front End. Own Every Angle. The L460 is an exceptional vehicle — this grille ensures its front end makes a statement that matches your personal vision. Shop the full Range Rover L460 exterior collection at Victorious Automotive and discover what the right details can do. Shop Range Rover L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm This product is an aftermarket replacement pattern part produced by Victorious Automotive. It is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the intellectual property of their respective owners. Professional installation is recommended. Always verify compatibility with your specific vehicle specification before purchase.

Victorious Automotive · Range Rover L460 · Exterior Styling SV Style Gloss Grey Front Grille for Range Rover L460 Vogue (2022+) A direct-fit, SV-inspired mesh grille finished in gloss grey — engineered to transform the front-end presence of your Range Rover L460 without cutting, coding, or compromise. Range Rover L460 2022–2026 Gloss Grey SV Style Mesh ABS Plastic Direct Replacement Exterior Styling De-Chrome Overview The Range Rover L460 Vogue is a statement in itself — a vehicle that commands attention on any road. But for owners who want to push the visual identity further, the factory grille only goes so far. The SV edition raised the bar with its distinctive mesh design and darker, more purposeful finish, and that's exactly what this grille brings to standard L460 models. This SV Style Gloss Grey Front Grille is a premium aftermarket replacement part, crafted from impact-resistant ABS plastic and finished in a refined gloss grey. The mesh pattern mirrors the aggressive aesthetic of Range Rover's own SV specification, giving your L460 a more dynamic, high-spec appearance without the dealership price tag. It's a particularly popular choice for owners building out a grey or blacked-out styling package, or those looking to move away from the chrome-heavy factory look. Designed as a direct swap for the standard L460 front grille, fitment requires no modification to the vehicle — no cutting, no drilling, no coding. The mounting points align precisely with the factory positions, making this one of the cleanest exterior upgrades available for the new Range Rover generation. What's Included 🔲 SV Style Front Grille 1x gloss grey replacement grille with pre-integrated mesh insert 🕸️ Pre-Installed Mesh Insert SV-style mesh pattern integrated into the grille frame 📋 Fitting Reference General guidance notes included for reference during installation Product Highlights SV-inspired mesh grille pattern for a sportier, more commanding front-end look Finished in gloss grey — a sleek alternative to the factory chrome or gloss black options UV-stable coating resists fading, cracking, and discolouration over time Direct replacement design — mounts using original factory fixing points Durable ABS plastic construction — lightweight yet impact-resistant Weatherproof finish rated for year-round UK and international conditions No cutting, drilling, or ECU coding required for installation Ideal for grey styling packages or de-chrome exterior builds Designed specifically for the L460 generation — not a universal fit part Achieves an SV-level aesthetic at a fraction of the genuine upgrade cost Compatibility Model Generation Year Range Fitment Range Rover Vogue L460 2022, 2023, 2024, 2025 Direct Fit Range Rover Vogue SV L460 SV 2022+ Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022+ Not Compatible Range Rover Sport L494 2013–2022 Not Compatible If you're unsure whether this grille is correct for your specific vehicle variant, please call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal tool, T20/T25 Torx, panel clips Ensure the vehicle is parked on a flat surface with the ignition off. Allow the engine bay to cool if recently driven. Open the bonnet and locate the upper grille retaining clips and fasteners along the top edge of the front fascia. Using a trim removal tool, carefully release the factory grille from its housing — working from one side to the other to avoid cracking the surround. Disconnect any ambient lighting connectors or camera harnesses attached to the factory grille if present, noting their positions for reassembly. Offer up the new SV Style grille to the aperture and align the mounting tabs with the original fixing points. Press the grille firmly into place, ensuring each clip engages with a positive click. Reattach any connectors as required. Stand back and inspect the fitment from distance — checking for flush alignment across the full width before closing the bonnet. ⚠ Fitting Note: Professional installation is recommended to ensure correct alignment and a clean, flush finish. Incorrect fitment can result in panel gaps or vibration at speed. This grille is not suitable for L460 SV models, which use a different front-end structure and grille configuration. SV Presence. Refined Grey Finish. Built for the L460. Whether you're refreshing your factory look, building a cohesive grey styling package, or simply after the cleaner, more aggressive aesthetic of the SV specification — this grille delivers. Explore the full range of L460 exterior upgrades at Victorious Automotive. Shop All Range Rover L460 Parts → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm This product is an aftermarket replacement pattern part and is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle references are used solely for fitment identification purposes. Victorious Automotive is an independent accessory specialist and has no commercial relationship with Land Rover or JLR.

Victorious Automotive · Defender L663 · Exterior Protection Gloss Black Front Bumper Guard — Land Rover Defender L663 (2020+) A precision-engineered ABS front bumper guard that fortifies your Defender L663's nose with aggressive gloss black styling — purpose-built for owners who don't compromise between looks and capability. Defender L663 2020–2026 Gloss Black ABS Construction 90 · 110 · 130 Direct Fit Off-Road Ready No Cutting Required Overview The Land Rover Defender L663 is one of the most capable and visually commanding 4x4s ever produced — a vehicle that demands accessories as serious as it is. Whether you're navigating the British countryside, tackling serious trails, or simply parked on the street, the front end of your Defender makes a statement before you've even stepped out of the door. This Gloss Black Front Bumper Guard has been designed exclusively for the Defender L663 platform, covering all body configurations — the 90, 110, and 130. Moulded from high-grade impact-resistant ABS, the guard sits flush against the factory bumper architecture, adding a layer of structural protection against stone strikes, brush, trail debris, and low-speed impacts — without adding bulk or requiring permanent modifications to your vehicle. The deep gloss black finish integrates seamlessly with the Defender's bold aesthetic, enhancing its presence while delivering the kind of functional protection that Defender owners actually rely on. Every mounting point is pre-engineered for a clean, confident fit — no guesswork, no adaptation required. What's Included 🛡️ Front Bumper Guard Gloss black ABS, pre-formed for L663 fitment 🔩 Mounting Hardware Kit All fixings and fasteners included 📐 Alignment Brackets Ensures flush, factory-quality positioning 📄 Installation Guide Step-by-step instructions for a clean fit Product Highlights Impact-resistant ABS construction — absorbs trail debris and low-speed strikes with ease Deep gloss black finish — UV-stable and resistant to surface fading over time Engineered for 90, 110 and 130 body configurations — one guard, all variants Direct OEM mounting points — no drilling, cutting or permanent modification required Lightweight by design — adds protection without meaningful weight penalty Preserves factory fog light and sensor apertures — no functional compromise Complementary to the Defender L663's angular, purposeful exterior language Compatible with capstan/winch frame systems when paired with the Enhanced Capstan Kit Designed to endure off-road environments — trail-tested geometry and fitment Clean finish from every angle — no raw edges, exposed fixings or visible seams Compatibility Model Variant Year Range Fit Defender 90 L663 — All trim levels 2020–2026 Direct Fit Defender 110 L663 — All trim levels 2020–2026 Direct Fit Defender 130 L663 — All trim levels 2020–2026 Direct Fit Defender 110 L316 (Pre-2020) Pre-2020 Not Compatible Discovery 5 L462 All Years Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 45–75 Minutes Park the Defender on a level surface and ensure the engine is off and cool before beginning work. Open the bonnet and locate the existing front bumper mounting points along the lower front fascia. Dry-fit the bumper guard against the vehicle to confirm alignment with all factory apertures and mounting holes before final installation. Insert the supplied alignment brackets into position, ensuring they seat flush against the bumper surface. Secure the guard using the included hardware kit — begin with centre fixings and work outward to ensure even pressure distribution. Verify that all fog light, parking sensor, and camera apertures remain unobstructed and fully functional. Do a final visual check from the front and sides to confirm the guard sits level and flush before torquing all fixings to hand-tight. ⚠ Important Note: A winch or capstan is not included with this kit. If you intend to use this guard with a capstan or winch frame system, the Enhanced Capstan Kit must be purchased separately — both components are required to complete the winch-ready configuration. Professional installation is recommended if you are unsure about any step. Built for Defenders. Trusted by Owners. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium exterior upgrades. Browse the full Defender L663 collection and find everything your vehicle deserves. Shop Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Defender L663 · Exterior Lighting Lower Grille Yellow LED Light Bar – Land Rover Defender L663 (2020+) Twelve high-output amber lenses in a weather-sealed aluminium housing — purpose-built to integrate into the lower grille of the L663 Defender and deliver genuine off-road illumination where it counts. Defender L663 2020–2024+ Yellow / Amber LED IP67 Waterproof Aluminium Housing Lower Grille Fit Wiring Harness Included 90 · 110 · 130 Overview The L663 Defender was engineered with intent — a vehicle built equally for expedition use and everyday practicality. Whether you're running the 90, 110, or 130, the lower front end of the Defender offers prime real estate for auxiliary lighting: recessed, purposeful, and completely uncompromised in terms of forward visibility. This LED light bar slots directly into that space, transforming the lower grille section into a functional lighting zone that matches the Defender's overland-ready character. This Yellow LED Light Bar is built around 12 high-output amber lenses, each chosen specifically for their penetration in fog, dust, rain, and low-visibility trail conditions. The amber wavelength scatters less than pure white light in adverse weather, making it the preferred choice for serious off-roaders and expedition drivers. The housing is cast aluminium — not plastic, not composite — and carries an IP67 waterproof rating, meaning full submersion up to one metre poses no risk to the unit. Unlike generic aftermarket bars that require fabrication or compromise your grille's OEM appearance, this light bar is designed with the L663 lower grille cavity in mind. The included wiring harness allows connection to your ignition circuit, DRL loop, or a dedicated interior switch, giving you full control over when and how the lights operate. It's a fitment that looks like it belongs — because it was designed to. What's Included 💡 12-Lens Yellow LED Light Bar High-output amber array in aluminium housing 🔌 Wiring Harness Pre-terminated leads, relay, and fuse included 🔘 Interior Switch Dash-mountable toggle for cabin control 🔩 Mounting Hardware Stainless fixings for secure grille integration Product Highlights 12 high-output yellow/amber LED lenses for maximum forward illumination in adverse conditions IP67 waterproof rated — sealed against full dust ingress and temporary submersion Cast aluminium housing — rust-proof, impact-resistant, and thermally efficient Amber wavelength optimised for fog, rain, dust, and low-visibility off-road use Defender L663-specific fitment — designed for the lower grille cavity across 90, 110, and 130 Complete wiring harness included — relay, fuse, and pre-terminated connectors Dash-mountable interior switch for independent on/off control Compatible with ignition loop, DRL circuit, or standalone switch configuration Fits all trim levels — S, SE, X-Dynamic, X, V8, and First Edition Low-profile multi-beam design integrates cleanly with or behind OEM lower grille mesh Compatibility Vehicle Code Body Years Trim Fit Land Rover Defender L663 90 2020–2024+ S, SE, X-Dynamic, X, V8 Direct Fit Land Rover Defender L663 110 2020–2024+ S, SE, X-Dynamic, X, V8 Direct Fit Land Rover Defender L663 130 2022–2024+ SE, X-Dynamic, X Direct Fit Land Rover Defender L316 90 / 110 Pre-2016 All Not Compatible Range Rover Sport L461 — 2022+ All Not Compatible Range Rover Vogue L460 — 2022+ All Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5–3 Hours  ·  Tools Required: Yes Remove the lower front bumper trim panel to access the grille cavity. Retain all OEM clips and fixings for reassembly. Identify the lower grille mounting points or mesh cutout zone where the light bar will sit. Test-fit the bar before committing to any brackets. Secure the light bar using the supplied stainless hardware. If your grille variant requires additional support, fabricate or source Defender-specific bracket extensions as needed. Route the wiring harness up through the bumper cavity and through the firewall, keeping clear of heat sources and moving components. Use existing grommets where possible. Connect to your chosen power source — ignition feed, DRL circuit, or a fused direct line — following the relay wiring diagram included with the harness. Mount the interior switch in a suitable dash location. Test all connections before finalising cable management with OEM-grade loom tape or conduit. Refit all trim panels, confirm all clips are seated, and perform a full function test in a controlled environment before any trail or road use. ⚠ Important: Depending on your specific grille variant or trim configuration, minor bracket modification or custom fabrication may be required. Professional installation is strongly recommended to ensure correct waterproofing of all connectors and proper integration with your Defender's electrical system. Incorrect wiring can affect vehicle electronics — always use a fused circuit. Built for the Terrain. Finished for the Build. The Defender doesn't do half measures — and neither should its lighting. Whether you're heading into the dark on a remote trail or simply want your L663 to carry the kind of prepared, purposeful look that matches what it's capable of, this yellow LED lower grille bar is a natural addition. Available exclusively from Victorious Automotive. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Exterior Styling Gloss Black Front Splitter with LED Add-On Kit – Land Rover Defender L663 (2020+) Sharpen your Defender's front-end stance with a precision-fitted gloss black splitter and integrated LED lighting — zero drilling, maximum presence. Defender L663 2020–2026 Gloss Black ABS LED Add-On Kit No Drilling Required 90 · 110 · 130 UV Resistant OEM-Style Fitment Overview The Land Rover Defender L663 is one of the most purposefully designed vehicles on the road — bold, upright, and unmistakably distinctive. But for owners who want to push that presence further without sacrificing the Defender's inherent character, the front end is where the transformation begins. A lower splitter that follows the factory bumper line, finished correctly, can reframe the entire face of the vehicle — adding visual width, a lower perceived ride height, and a more planted, performance-oriented stance. This Gloss Black Front Splitter with LED Add-On Kit is engineered specifically for the Defender L663 platform. Constructed from high-grade ABS and finished in a deep, UV-resistant gloss black lacquer, it mounts directly over the factory front bumper using bonding tape and discreet hardware — no cutting, no drilling, no permanent modification. The integrated LED add-on kit takes the upgrade a step further, providing subtle accent lighting along the splitter profile that elevates nighttime presence and adds a refined, customised detail rarely seen on stock configurations. Whether your Defender is finished in Santorini Black and running the Black Pack, or you're adding contrast to a lighter body colour, this kit delivers a factory-quality result at a fraction of the cost of bespoke bodywork. It's the kind of upgrade that looks like it came from the factory — because it's designed to. What's Included 🖤 Gloss Black Front Splitter Multi-piece ABS construction, pre-finished in gloss black lacquer 💡 LED Add-On Kit Accent LED strip with wiring loom, designed for splitter integration 🔩 Mounting Hardware Includes bonding tape, clips, and all required fixings 📋 Fitting Instructions Step-by-step guide for splitter and LED installation Product Highlights Deep gloss black finish — UV-resistant and weatherproof for year-round use High-grade ABS construction — lightweight, rigid, and impact-resistant Integrated LED add-on kit included — accent lighting along the full splitter profile Add-on design — mounts over the factory bumper, no removal of OEM trim required No drilling required — bonding tape and discreet clip fixings throughout OEM bumper line tracing — seamlessly follows the Defender's factory contours Enhances visual width and lowers the perceived stance of the front end Pairs perfectly with Black Pack, Dark Atlas, and Carpathian Grey trims Suitable for all body lengths — 90, 110, and 130 configurations Compatible with all trim levels from base S through to V8 and First Edition Compatibility Model Body Style Year Range Trim Level Fitment Defender 90 (L663) 3-Door 2020–2026+ S, SE, X-Dynamic, X, V8 Direct Fit Defender 110 (L663) 5-Door 2020–2026+ S, SE, X-Dynamic, X, V8 Direct Fit Defender 130 (L663) 8-Seat 2022–2026+ SE, X-Dynamic, X Direct Fit Defender (L663) All 2020–2026+ First Edition Direct Fit Defender (L663) — Urban Pack All 2020–2026+ Factory Urban Front Lip fitted Not Compatible Defender L316 (Original) All Pre-2020 All Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Trim removal tool, isopropyl alcohol, heat gun (optional) Park the vehicle on a flat surface and allow the bumper to reach ambient temperature before beginning. Clean the entire lower bumper surface with isopropyl alcohol to remove wax, grease, and road film — adhesion depends on a fully degreased substrate. Dry-fit the splitter pieces against the bumper to confirm alignment and identify any areas that may require minor adjustment. Use masking tape to mark the target position before bonding. Apply the supplied double-sided bonding tape to the rear face of the splitter. A heat gun used briefly on the bonding tape and bumper surface will significantly improve adhesion, particularly in cooler climates. Press the splitter firmly into the marked position, applying sustained pressure across all contact surfaces for a minimum of 60 seconds. Fit any supplied clips or discreet hardware fixings to reinforce the bond at the edges. For the LED kit: route the wiring loom behind the bumper fascia and connect to a switched 12V feed — the sidelights circuit is the most common choice for a tidy, automatic operation. Secure all wiring with the supplied clips to prevent vibration noise. Allow the bonding adhesive to cure for a minimum of 24 hours before washing or driving at motorway speeds. Avoid pressure washing directly at the bonded seams during the first 48 hours. ⚠ Important: Professional fitting is recommended for optimal alignment and long-term durability. If your Defender is fitted with the factory Urban Pack front lip, this kit is not compatible and should not be installed over the existing trim. Always verify your bumper configuration before ordering. Bolder Stance. Ambient Edge. Defender Elevated. The Defender was already a statement. This front splitter and LED kit is how you make it yours — a precision upgrade that looks factory, performs durably, and turns heads on every road you choose. Shop All Defender L663 Accessories 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks remain the property of their respective owners and are used solely for fitment reference purposes.

Victorious Automotive · Defender L663 · Exterior Styling Gloss Black Hood Vents – Land Rover Defender L663 (2020–2024+) Full OEM Replacement Precision-fit bonnet vent replacements in deep gloss black — a clean, purposeful upgrade that sharpens the Defender's front-end presence without compromise. Defender L663 2020–2024+ Gloss Black ABS OEM Replacement 90 · 110 · 130 No Adhesive UV Resistant Direct Fit Overview The Land Rover Defender L663 is built for those who refuse to compromise — equally at home on a Welsh mountain track as it is parked outside a Mayfair hotel. Its bonnet vents are one of the most visible design details on the front-end, and swapping them for gloss black is one of the cleanest, most effective visual upgrades you can make to the entire vehicle. These are not adhesive overlays or stick-on covers. These are full OEM-style replacement vents, engineered to drop directly into the factory bonnet vent apertures using the existing mounting clips — no cutting, no drilling, no modification required. The result is a factory-quality finish with a darker, more aggressive character that complements Black Pack builds, gloss black grilles, and contrast styling packages perfectly. Constructed from high-grade ABS with a deep gloss black lacquer finish, these vents are built to withstand the elements — UV-stabilised to resist fading and impact-resistant enough to handle whatever conditions your Defender is put through. If you're building a blacked-out Defender or simply want a more refined alternative to the painted factory finish, these deliver exactly that. What's Included 🖤 Left Bonnet Vent Gloss black ABS, driver-side replacement 🖤 Right Bonnet Vent Gloss black ABS, passenger-side replacement 🔧 Mounting Hardware Uses existing factory clips — no additional hardware needed 📄 Fitment Guide Step-by-step installation reference included Product Highlights Deep gloss black lacquer finish — rich, consistent shine across both vents High-grade ABS construction — lightweight, rigid, and impact-resistant UV-stabilised coating — resists fading, yellowing, and surface degradation Full OEM-style replacements — not adhesive wraps or clip-on overlays Engineered to factory tolerances — slots directly into existing bonnet apertures Uses factory mounting clips — zero modification to your bonnet required Sold as a matched pair — left and right vents included for symmetry Complements Black Pack, gloss grille upgrades, and contrast styling builds Weather and road-debris resistant — suitable for all climates and conditions Reversible upgrade — original vents can be refitted at any time Compatibility Vehicle Code Body Years Trim Fitment Land Rover Defender L663 90 2020–2024+ S, SE, X-Dynamic, X Direct Fit Land Rover Defender L663 110 2020–2024+ S, SE, X-Dynamic, X Direct Fit Land Rover Defender L663 130 2022–2024+ S, SE, X-Dynamic, X Direct Fit Land Rover Defender L663 90 / 110 2020–2024+ V8 Direct Fit Defender (aftermarket bonnet) L663 Any Any — Not Compatible Defender (factory carbon bonnet) L663 Any Any — Not Compatible Installation Notes 🔧 Difficulty: Easy — Estimated Time: 20–40 Minutes Open the bonnet and secure it in the fully raised position using the factory prop rod. Working from beneath the bonnet, locate the factory mounting clips securing each original vent in place. Carefully release the clips using a plastic trim removal tool — avoid metal tools to prevent bonnet surface damage. Remove the original vent panel by lifting it clear of the aperture. Retain the factory clips if they are not pre-attached to the replacement. Align the gloss black replacement vent into the aperture, ensuring all clip positions are correctly seated. Press firmly and evenly until each clip engages with a positive click. Repeat for the second vent. Close the bonnet and inspect both vents for flush alignment and even panel gaps before driving. ⚠ Note: Professional installation is recommended to ensure perfect fitment and avoid any risk of surface damage. These vents are designed for factory-specification bonnets only. Do not attempt fitment on modified, aftermarket, or carbon fibre bonnets. Original vents can be retained for future refitting if required. Subtle Detail. Serious Presence. The Defender's bonnet vents are one of the first things you see — and one of the easiest details to elevate. These gloss black replacements deliver a factory-quality finish with a sharper, more deliberate character. Explore the full Defender L663 collection at Victorious Automotive. Shop Defender L663 Upgrades 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Defender L663 · Exterior Lighting Gloss Black Roof Light Pod V2 with LED Lights — Land Rover Defender L663 (2020–2026) A purpose-built, aerodynamic roof pod with integrated high-efficiency LED lighting, designed as a direct-fit upgrade for the Defender 90 and 110 L663 — no cutting, no drilling, no compromises. Defender L663 2020–2026 Direct Fit ABS Gloss Black Integrated LED Wireless Remote Aerodynamic Design Non-Destructive Install Version 2 Overview The Defender L663 is a vehicle that commands presence — and its roof line, elevated stance, and muscular proportions make it one of the most accessory-receptive platforms in Land Rover's modern lineup. Whether you're running overland trails or navigating urban environments, the roofline of the L663 is prime real estate for purposeful upgrades that balance form and function without compromising the factory aesthetic. This Version 2 Gloss Black Roof Light Pod has been engineered specifically for the Defender 90 and Defender 110 L663 from 2020 onwards. Constructed from premium ABS in a high-gloss black finish, the pod features an aerodynamically refined profile that sits flush and confident above the roofline — complementing the Defender's angular language rather than clashing with it. Integrated high-efficiency LED lights deliver powerful, focused illumination exactly where it's needed most. Version 2 brings refinements over the original design: tighter panel fit, improved LED output, and a wireless remote control system that allows you to operate the lights independently without modifying your interior switches. Installation is non-destructive, using automotive-grade 3M adhesive tape for a secure, clean mount that preserves your vehicle's original structure — making this the ideal upgrade for owners who want capability without compromise. What's Included 🔲 Roof Light Pod V2 ABS Gloss Black, aerodynamic profile 💡 Integrated LED Light Bar High-efficiency LEDs, pre-fitted 📡 Wireless Remote Control Independent operation of LED lights 🔌 Wiring Loom For direct fuse box connection 🧲 Automotive 3M Mounting Tape High-bond, weather-resistant adhesive 📦 Protective Packaging Inner poly bag + outer carton box Product Highlights Purpose-built for Defender L663 90 and 110 — no adapters required Version 2 design with improved panel fit and LED performance ABS Gloss Black construction — durable, UV-resistant, premium finish Aerodynamic pod profile minimises wind noise and drag at speed High-efficiency LEDs provide exceptional brightness and longevity Wireless remote control for convenient, independent light operation Non-destructive installation — no drilling, no cutting required Mounts via automotive-grade 3M tape for a clean, factory-style finish Direct fuse box wiring connection for reliable, stable power supply Individually packed with protective inner and outer packaging Compatibility Model Code Year Range Fit Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2022–2026 Unconfirmed Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Defender (Original) Pre-2020 Pre-2020 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Yes Thoroughly clean and degrease the roof mounting surface using an isopropyl alcohol wipe to ensure maximum 3M tape adhesion. Dry-fit the roof pod to confirm positioning before removing the 3M tape backing — check alignment against the roofline centreline. Peel the 3M tape backing and firmly press the pod into position, applying sustained pressure across the full mounting surface for 30–60 seconds. Route the wiring loom carefully through the roof seal or door frame — avoid sharp edges and secure with cable ties at regular intervals. Connect the wiring directly to the vehicle's fuse box. Identify an appropriate fused circuit (or add a new fused feed) rated for the LED load. Pair the wireless remote control receiver in line with the LED wiring connection, following the included wiring diagram. Test LED operation with the remote before final cable dressing. Confirm full illumination and wireless response at range. Dress all cables neatly and secure any loose wiring to prevent movement or chafing over time. ⚠ Please Note: This installation requires basic DIY wiring experience. If you are not comfortable working with your vehicle's fuse box or routing external wiring, we recommend engaging a professional auto-electrician. Installation is the sole responsibility of the customer. This product is handcrafted — minor surface variations may be present and are characteristic of the manufacturing process. Built for Defenders. Trusted by Enthusiasts. Join over 12,300 verified Land Rover owners who trust Victorious Automotive for premium exterior upgrades. Every product is selected for fit, finish, and genuine compatibility — no guesswork, no compromises. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Defender L663 · Exterior Lighting Gloss Black Roof Pod with Dual LED Lights for Land Rover Defender L663 2020+ A purpose-built, vehicle-specific roof pod with integrated dual LED lights — engineered to elevate the Defender's commanding presence above the windscreen, on road or trail. Defender L663 2020–2024+ Dual LED Lights Gloss Black ABS Roof Pod OEM Fitment Weather Resistant 90 · 110 · 130 Overview The Land Rover Defender L663 is a vehicle built with purpose — every line, proportion, and design detail communicates capability and intent. Owners who know their Defender understand that the right accessory doesn't fight the design, it amplifies it. That's the philosophy behind everything we build at Victorious Automotive, and this gloss black roof pod is no exception. Sculpted specifically for the L663 roofline and positioned above the windscreen, this roof pod integrates two high-output LED lights into a unified, aerodynamically considered housing. The gloss black ABS finish is UV-stabilised and weather-resistant, making it a natural companion to Defender black pack builds, Carpathian Grey stealth specs, or any dark-trimmed exterior configuration. It doesn't look fitted — it looks factory. Beyond aesthetics, the dual LED units deliver genuine output for low-light trails, forest tracks, and country lanes where the standard headlamp spread falls short. Whether you're building a capable overland platform or simply want your Defender to make a statement in an urban environment, this roof pod delivers both substance and style in a single, clean installation. What's Included 🖤 Gloss Black Roof Pod 1 x UV-stable ABS housing, vehicle-specific profile 🔦 Dual LED Light Units 2 x high-output integrated LED lights, pre-mounted 🔌 Wiring Harness Full loom for clean routing and switch integration 🔩 Mounting Hardware Basic fittings included for standard installation Product Highlights Dual high-output LED lights integrated directly into the pod housing — no external brackets Gloss black ABS construction is UV-stabilised and rated for all-weather exposure Vehicle-specific design follows the exact roofline curvature of the L663 Defender OEM-style fitment with no universal adapter plates or improvised mounting solutions Positioned above the windscreen for maximum forward light projection and visual impact Wiring harness included for clean, routed integration into DRLs, fogs, or a dedicated switch Compatible with all L663 body variants — 90, 110, and 130 configurations Suits all trim levels from entry S to V8, including X-Dynamic and black pack builds Adds purposeful, expedition-ready aesthetic without aftermarket clutter Enhances visibility on unlit trails, forest roads, and low-light off-road conditions Compatibility Model Variant Year Range Fitment Defender 90 S, SE, X-Dynamic, X, V8 2020–2024+ Direct Fit Defender 110 S, SE, X-Dynamic, X, V8 2020–2024+ Direct Fit Defender 130 S, SE, X-Dynamic, X 2022–2024+ Direct Fit Defender 110 with Factory Roof Rack All trims with OEM roof accessories occupying same mounting zone 2020–2024+ Check Clearance Classic Defender (L316) All variants Pre-2020 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 2–3 Hours  ·  Professional Install Recommended Clean and inspect the roof area above the windscreen to ensure it is clear of any factory accessories or obstructions before proceeding. Dry-fit the roof pod against the roofline to confirm alignment and identify your preferred mounting position prior to any drilling. Mark and carefully drill mounting points as required — use appropriate sealant around all penetrations to maintain weatherproofing integrity. Secure the pod housing to the roof using the supplied hardware, ensuring all fixing points are torqued correctly and flush against the panel. Route the wiring harness through the roof or A-pillar as preferred, keeping the loom away from heat sources and sharp edges throughout. Connect the LED lights to your chosen power source — a dedicated switch, DRL circuit, or auxiliary fog input are all common configurations. Test both LED units for correct operation before finalising all fittings and applying finishing trim or sealant as required. ⚠ Note: Drilling into the roof panel is required for most installations and may affect your vehicle's factory warranty on structural components. Professional installation is strongly recommended to ensure correct waterproof sealing and safe electrical integration. Always verify local road regulations regarding auxiliary lighting prior to use on public roads. Style That Shines. Power That Performs. The Defender was designed to go further than most would dare — this roof pod ensures it does so with the visibility and presence that platform commands. Explore the full Defender L663 exterior collection at Victorious Automotive and build your Defender exactly as it deserves. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always consult a qualified technician before modifying your vehicle.

Victorious Automotive · Defender L663 · Exterior Styling Gloss Black Exterior Pack – Land Rover Defender 90 / 110 / 130 (L663) 2020+ A complete de-chrome styling kit that replaces key silver and grey exterior trims with a deep, high-gloss black finish — delivering a factory-blacked-out presence without modification. Defender L663 2020–2025+ 90 · 110 · 130 ABS Construction UV-Resistant Gloss No Drilling Required OEM Fitment De-Chrome Upgrade Overview The Land Rover Defender L663 is a vehicle that rewards attention to detail. From its squared-off silhouette to its exposed bolt architecture, every element of the Defender's design makes a deliberate visual statement — and the exterior trim plays a critical role in defining its character. The factory silver and grey accents, while functional, can dilute the impact of an otherwise aggressive, purposeful build. The Victorious Gloss Black Exterior Pack for the Defender 90, 110, and 130 is engineered as a complete de-chrome solution. Rather than individual pieces purchased separately, this pack delivers a cohesive, coordinated transformation across the front and rear of the vehicle — bumper trims, grille surrounds, fog light housings, and rear inserts — all finished in the same deep, mirror-quality gloss black. The result is a uniform, blacked-out aesthetic that reads as intentional and refined rather than aftermarket. Whether you're building a stealth-focused urban Defender or a commanding overland machine, this pack integrates seamlessly with black alloys, roof accessories, and carbon fibre accents to elevate the overall finish of your build without touching the factory mounting architecture. What's Included 🖤 Front Bumper Trims Replaces factory silver lower front bumper accents 🖤 Rear Bumper Trims Gloss black finish to match front for cohesive styling 🖤 Fog Light Trims Surrounds front fog light housings in matching gloss black 🖤 Rear Trim Inserts Gloss black inserts for the rear tailgate surround area 🖤 Front Grille Trim Replaces chrome/silver grille surround with gloss black finish 🖤 Front Grille Lower Trim Panel Lower fascia panel in deep gloss black for a unified front end Kit contents may vary slightly depending on Defender body style: 90 / 110 / 130. Please confirm your model at checkout or contact our team. Product Highlights OEM-style precision fitment — uses original factory mounting points throughout Deep gloss black UV-resistant finish — colour-stable and weather-protected year-round High-quality ABS construction — lightweight, impact-resistant, and built to last No drilling, cutting, or modification required — fully reversible installation Replaces factory silver and grey trims with a coordinated all-black aesthetic Complete front-to-rear coverage — bumpers, grille, fog lights, and rear inserts Pairs seamlessly with black alloys, roof rails, and carbon fibre exterior accessories Cohesive finish that reads as a factory-spec black pack rather than a retrofit Available across all L663 body styles — Defender 90, 110, and 130 Professional installation recommended for perfect panel alignment and finish Compatibility Vehicle Model Code Years Trim Levels Fitment Defender 90 L663 2020–2025+ S, SE, X-Dynamic, X, V8 Direct Fit Defender 110 L663 2020–2025+ S, SE, X-Dynamic, X, V8 Direct Fit Defender 130 L663 2020–2025+ SE, X-Dynamic, X Direct Fit Defender 90/110/130 – Factory Black Pack L663 2020–2025+ All Not Required Defender L316 (Pre-2020) L316 Pre-2020 All Not Compatible If your Defender came factory-equipped with the OEM Black Pack option, exterior trims may already be gloss black. Contact our team on +44 203 943 9919 if you are unsure of your vehicle's specification. Installation Notes 🔧 Difficulty: Easy to Moderate  ·  Estimated Time: 2–3 Hours Clean all factory trim surfaces thoroughly with an alcohol-based prep solution to remove wax, grease, and debris before beginning. Carefully remove the existing factory silver or grey trim pieces using plastic trim removal tools — avoid metal tools that may scratch surrounding bodywork. Test-fit each gloss black replacement trim to the factory mounting points before final fitment to confirm alignment and seating. Clip or bolt each component into position using the original factory fixings — no additional hardware, drilling, or adhesive is required. Apply light pressure along all edges once fitted to ensure all clips and retention points are fully engaged. Step back and inspect alignment across all panels before completing the install — minor adjustments are easiest made before any rubber trim or weather seals are refitted. ⚠ Installation Note: Professional installation is recommended to ensure perfect panel gap alignment and to avoid damage to surrounding paintwork. This product is not designed for vehicles that left the factory with the OEM Black Pack specification, as those trims are typically already gloss black and the replacement pieces may not achieve the same fitment quality. Black It Out. Level It Up. The Victorious Gloss Black Exterior Pack gives your Defender the commanding, factory-style blacked-out presence it deserves — without compromise and without modification. Every piece is engineered to the same standard you'd expect from the vehicle itself. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.