Automotive

Victorious · BMW X1 · Interior Trim 2-Piece Aluminum Alloy Tweeter Speaker Cover Trim for BMW X1 F48 (2016–2018) Premium aluminum speaker surrounds that elevate your X1 cabin with a refined, protective finish. BMW X1 F48 2016–2018 Aluminum Alloy Matt Silver Premium Interior Overview The BMW X1 F48 deserves interior finishes that match its sophisticated engineering. These 2-piece aluminum alloy tweeter speaker cover trims are precision-engineered to integrate seamlessly with your X1's dashboard, protecting your premium audio system while adding a touch of refined luxury to the cabin. Constructed from high-grade aluminum alloy with a satin silver finish, these covers resist fingerprints, dust, and UV damage whilst maintaining the factory-correct aesthetic. The custom-fit design requires no drilling or vehicle modification—installation is straightforward using automotive-grade double-sided adhesive, taking under 15 minutes per side. Whether you're refreshing your X1's interior or safeguarding your tweeter surrounds from wear, these speaker cover trims deliver durability and style in equal measure. What's Included 📦 2x Aluminum Speaker Covers Left & right tweeter trim units 🔧 Adhesive Pre-Applied Automotive-grade double-sided tape 📋 Installation Guide Step-by-step fit instructions Product Highlights High-quality aluminum alloy construction for durability and longevity Elegant satin silver finish complements all BMW X1 colour schemes Precision-fit for BMW X1 F48 — no modifications required Protective design shields tweeters from dust and UV exposure Automotive-grade adhesive tape for secure, lasting installation Fingerprint-resistant matte surface maintains pristine appearance Lightweight design with zero impact on vehicle weight or handling Factory-correct aesthetic integrates seamlessly with OEM interior Professional-grade finish suitable for concours-level detailing Easy removal without damage to dashboard or speaker housings Compatibility Model Year Code Fit Status BMW X1 2016 F48 Direct Fit BMW X1 2017 F48 Direct Fit BMW X1 2018 F48 Direct Fit BMW X1 2019+ F48 LCI Not Compatible BMW X1 2023+ U11 Not Compatible Installation Difficulty Level: Easy | Time: 15 Minutes Prepare the surface: Use a microfiber cloth and isopropyl alcohol to thoroughly clean the tweeter surround area. Allow to dry completely—this ensures optimal adhesive contact. Position the trim: Align the left speaker cover with the tweeter housing. Start at the top centre and press firmly downward, working out any air bubbles. Secure the fit: Apply steady pressure around the entire perimeter for 30 seconds to activate the adhesive bond. Repeat for right side: Follow the same procedure for the passenger-side tweeter cover. Allow cure time: Leave undisturbed for 2 hours before using the audio system or adjusting trim. Note: Ensure the dashboard surface is completely dry and free of dust. Do not pull on the trim during installation—let the adhesive do the work. If repositioning is needed, gently lift from the edge and reapply. Ready to Refine Your X1's Interior? Upgrade your BMW X1 F48 with premium aluminum speaker trim that combines protection, style, and simplicity. Our 30-day money-back guarantee ensures complete satisfaction. Add to Cart Use code 22GET20 for 20% off when you purchase 2 or more Victorious items. ⭐ 4.9/5 Stars – 12,300+ verified reviews 🚚 Worldwide Shipping – DHL, FedEx, UPS, TNT ✅ 30-Day Guarantee – Full refund if unsatisfied 📞 Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent automotive accessory specialist and is not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke AG, or Land Rover. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility and enhancement purposes only.

BMW · X1 · Interior Trim Chrome Steering Wheel Button Cover Trim for BMW X1 (2016–2023) Elevate your X1 interior with premium carbon fibre steering wheel controls that deliver durability, protection, and understated sophistication. BMW X1 2016–2023 Carbon Fibre ABS Premium Steering Wheel Interior Trim Overview Your BMW X1 deserves interior details that match its engineering excellence. These chrome steering wheel button cover trims are engineered specifically for X1 models spanning 2016 to 2023, providing a direct fit that demands zero modifications or compromise. Crafted from premium ABS plastic with an authentic carbon fibre finish, these trims shield your steering wheel buttons from daily wear, UV exposure, and fingerprints whilst delivering a cohesive, modern aesthetic to your cabin. The polished chrome accents catch light beautifully and complement both factory styling and upgraded interior packages. Installation is plug-and-play. No cutting, no adhesives, no dealer visits. A set of two covers the entire steering wheel button cluster, transforming a functional component into a design statement that reflects your attention to detail. What's Included ✓ 2× Steering Wheel Trims Left and right button covers with chrome bezel ✓ Installation Guide Easy reference card with step-by-step photos ✓ Microfibre Cloth For safe cleaning before and after fitment ✓ 30-Day Returns Full money-back guarantee, no questions asked Product Highlights Premium ABS plastic with authentic carbon fibre finish resists yellowing and UV damage Chrome-plated accents deliver a polished, factory-quality appearance Engineered for perfect fitment on X1 F48 (2016–2023) without trimming or heat-forming Protects buttons from wear, scratches, and discoloration under constant use Tool-free installation takes under 10 minutes per side Preserves full functionality of all steering wheel controls—no interference with button actuation Easy to clean: wipe with microfibre cloth or gentle soap solution Complements OEM interior trim and aftermarket upgrades equally well Lightweight design creates zero vibration or rattle at highway speeds Backed by Victorious Automotive's 4.9★ reputation and 12,300+ verified reviews Compatibility Model Year Range Generation Fit Status BMW X1 (Petrol / Diesel) 2016–2023 F48 Direct Fit BMW X1 xDrive (All Trims) 2016–2023 F48 Direct Fit BMW X1 sDrive (All Variants) 2016–2023 F48 Direct Fit BMW X2 (All Models) 2018–2024 F39 Not Compatible BMW X1 (Pre-2016) 2009–2015 E84 Not Compatible Important: These trims are engineered exclusively for F48 X1 models (2016–2023). Fitment on other BMW platforms or model years is not guaranteed. Always verify your chassis code (F48 is typically printed on your door jamb sticker) before ordering. Installation Difficulty Level: Beginner | Time Required: 8–12 minutes Prepare the steering wheel. Park your X1 in a safe, well-lit area. Ensure the steering wheel is in its most accessible position (typically all the way down). Use the microfibre cloth to gently wipe the existing button area free of dust and oils. Identify the fit points. Locate the pre-existing slots or snap tabs on the steering wheel button cluster. These align perfectly with the underside of the trim cover—no drilling or fastening required. Align the first cover. Hold the left trim cover at a 45-degree angle and gently slide it into position, ensuring all snap points make contact. Press firmly until you hear a soft click. Fit the second cover. Repeat the process for the right-side trim. Both covers should sit flush with the steering wheel surface, with no gaps or overhang. Verify alignment. Step back and visually inspect the steering wheel from multiple angles. The chrome accents should be evenly spaced and the carbon fibre finish should appear continuous across both covers. Test functionality. Press each steering wheel button to confirm they respond normally. Voice controls, volume, and menu navigation should operate without resistance. Clean and protect. Once satisfied, use the microfibre cloth to polish the chrome elements and remove any fingerprints. Your trims are now ready for daily use. Note: Do not force the covers into position. If resistance is felt, stop and recheck alignment. Forcing can damage the snap tabs and render the covers unusable. Professional installation is always available upon request. Upgrade Your X1 Interior Today Premium steering wheel trims are a hallmark of owners who refuse to compromise on quality. These covers protect your investment whilst adding the kind of refined detail that transforms a cabin from good to exceptional. Order now and enjoy free worldwide shipping plus our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 – 12,300+ Reviews 🌍 Worldwide DHL, FedEx, UPS Shipping 📞 Expert Support – +44 203 943 9919 ✓ 30-Day Money-Back Guarantee Victorious Automotive is an independent aftermarket retailer and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW dealer. BMW is a registered trademark of BMW AG. All product names and vehicle model designations are for identification purposes only. Our products are designed to enhance and customise your vehicle; they are not OEM parts and do not carry manufacturer warranty. Please consult your local vehicle documentation or contact your BMW dealer if you have questions about compatibility or installation before purchase.

BMW · X1 F48 · Exterior Trim Carbon Fiber Side Mirror Cover Trim Set – BMW X1 F48 2016-2019 Premium ABS carbon fiber mirror covers that elevate your X1's aesthetic while delivering lasting protection and a direct, tool-free fit. F48 2016-2019 Carbon Fiber ABS Direct Fit 2-Piece Set Overview The BMW X1 F48 is a versatile compact luxury SUV that demands attention to detail. Your mirror surrounds are among the most visible exterior elements—scratches and weathering here catch the eye immediately. These Carbon Fiber Side Mirror Cover Trims are engineered to transform that impression while safeguarding your mirrors from road wear, UV exposure, and minor impact. Crafted from premium ABS with an authentic carbon fiber weave finish, this 2-piece set delivers the look of genuine carbon at a fraction of the cost, without sacrificing durability. The covers integrate seamlessly with the F48's existing trim line and require no cutting, drilling, or modification. Installation is straightforward—designed for owners who appreciate quality without the dealership markup. Whether you're detailing a fresh purchase or refreshing an aging X1, these mirror covers signal intent: you care about every surface of your vehicle. What's Included 🎨 Left Mirror Cover Driver-side, direct-fit ABS trim 🎨 Right Mirror Cover Passenger-side, direct-fit ABS trim 📋 Installation Guide Step-by-step visual reference 🛡️ Adhesive Tabs Pre-installed for secure mounting Product Highlights Premium ABS with authentic carbon fiber weave finish Direct-fit design—no trimming, drilling, or modifications required Lightweight yet rigid construction resists warping and fading Protects mirror surrounds from scratches, UV damage, and weathering OEM-quality adhesive backing for lasting hold without residue Easy removal—doesn't damage factory paint when carefully removed Gloss finish complements X1 F48 body lines and trim Pair perfectly with other carbon fiber exterior upgrades Simple installation in under 30 minutes per side Backed by 30-day money-back guarantee—complete peace of mind Compatibility BMW X1 Model Year Range Fitment X1 F48 sDrive20i, xDrive20i, xDrive28i 2016–2019 Direct Fit X1 F48 M40i, M40d 2017–2019 Direct Fit X1 F48 Pre-2016 (F48.1) Pre-2016 Not Compatible X1 F49 (Second Gen) 2020+ Not Compatible Installation Notes Difficulty: Beginner | Time: 20–30 Minutes Park your X1 in a well-lit, sheltered area. Turn off the engine and allow mirrors to cool for 5 minutes if the vehicle has been in direct sunlight. Gently clean both mirror surrounds with a microfiber cloth and automotive soap. Dry thoroughly and wipe with a lint-free cloth to remove all dust and residue. Carefully peel away the protective backing from the adhesive tabs on the reverse side of the left mirror cover. Align the cover with the mirror surround, starting from the top edge. Apply gentle downward pressure, working from top to bottom to avoid air bubbles. Hold firmly in place for 30 seconds. Repeat the process with the right mirror cover. Allow adhesive to cure for 24 hours before exposing mirrors to water or extreme temperature changes. ⚠️ Temperature Tip: For best adhesion, apply covers when ambient temperature is between 50–85°F (10–29°C). Cold surfaces may reduce initial grip; warm mirrors slightly with a hair dryer on low if needed. Complete Your X1 F48 Transformation These mirror covers are the finishing touch that separates a well-maintained X1 from one that's been thoughtfully curated. Pair with carbon fiber door handle covers, grille trim, or window surrounds for a cohesive, premium aesthetic. Shop Carbon Fiber Trim for X1 F48 Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT 🛡️ 30-day guarantee – Full refund, no questions 📞 +44 203 943 9919 – Mon–Fri, 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke AG, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the exclusive property of their respective manufacturers. This product is designed for aftermarket fitment only and is not an OEM component.

BMW · Interior Trim · Door Handles Black Wood Grain ABS Interior Door Handle Trim Set – BMW X1 F48 & X2 F47 Elevate your cabin with premium wood grain accents that blend seamlessly into modern BMW interiors. F48 / F47 2016–2019 ABS Plastic Black Wood Grain Easy Install Set of 4 Overview The BMW X1 F48 and X2 F47 deserve an interior that matches their sharp exterior design. This set of four interior door handle trims brings a contemporary touch to your cabin while maintaining the minimalist aesthetic BMW owners expect. Finished in sophisticated black wood grain, each trim catches light beautifully and creates visual depth across all four doors. Crafted from durable ABS plastic, these trims are engineered to resist fading, cracking, and UV damage. The wood grain pattern is precisely printed and sealed, ensuring a premium finish that lasts. Whether you're refreshing an ageing interior or upgrading a new purchase, this set transforms your door panels in minutes without any drilling or permanent modification. Installation is straightforward—high-strength double-sided tape means no tools required. Simply clean the surface, peel and apply. The set includes all four door trims, making it a complete cabin upgrade in one purchase. What's Included 🚪 4x Door Handle Trims Black wood grain finish, one for each door 📋 Pre-Cut Templates Ensures perfect alignment on first try 🔌 3M Double-Sided Tape Heavy-duty adhesive included for secure fit 📖 Installation Guide Step-by-step photos with helpful tips Product Highlights Black wood grain finish adds premium visual appeal Durable ABS plastic resists fading and UV damage Perfect fit for BMW X1 F48 and X2 F47 models Pre-cut and ready to install—no trimming needed Heavy-duty 3M adhesive tape included No drilling, no permanent modification All four door trims in one set Seamless integration with factory design Easy to clean with standard interior care products Reversible installation with no residue left behind Compatibility Model Years Fit Status BMW X1 F48 2016–2019 Direct Fit BMW X2 F47 2018–2019 Direct Fit BMW X1 F49 2020+ Not Compatible BMW X2 F48 2020+ Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Prepare the Surface: Clean each door handle area with a microfiber cloth and rubbing alcohol. Allow to dry completely (5 minutes). Position the Trim: Use the included template to mark the correct position on each door. Align horizontally and vertically for a flush finish. Apply Adhesive: Peel the backing from the 3M tape on each trim piece. Press firmly onto the door handle area for 10 seconds. Secure the Fit: Allow the adhesive to cure for 24 hours before touching or cleaning the interior. Full strength is achieved after this period. Final Check: Inspect all four trims for alignment and ensure no gaps between trim and panel. Note: Ensure your vehicle model matches the compatibility table above. These trims are specifically engineered for F48 and F47 chassis. Verify your model code before ordering. Ready to Upgrade Your Interior? Transform your BMW X1 or X2 cabin with a premium wood grain accent that speaks to your attention to detail. Stock is limited for this finish. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to BMW Group, Bayerische Motoren Werke AG, or any official BMW distributor. All vehicle names, model codes, and designations are used solely for compatibility and identification purposes. This product is an aftermarket accessory and is not an OEM part.

BMW · X1 F48 / X2 F47 · Interior BMW X1 F48 & X2 F47 LHD ABS Central Control Multimedia Panel Premium matte-finish control panel engineered for seamless integration into your BMW's central console. X1 F48 2016–2019 X2 F47 2018–2019 LHD Only ABS Material Matte Finish Adhesive Install Overview Designed specifically for the BMW X1 F48 (2016–2019) and BMW X2 F47 (2018–2019) left-hand drive models, this central control multimedia panel elevates your cabin's interior aesthetic with a contemporary matte finish that complements modern BMW design language. Crafted from high-quality ABS plastic, this panel delivers durability and precision engineering. It's engineered to fit exactly where the original console meets the multimedia area, creating a seamless, integrated appearance without compromise. Whether you're refreshing an aging interior or restoring your cabin to near-factory condition, this panel slots in perfectly. Installation is straightforward: the included industrial-grade double-sided adhesive ensures a permanent, secure bond that won't shift or rattle. No drilling, cutting, or modification of your vehicle required. Simply clean the mounting surface, apply the adhesive, and press firmly into place. What's Included 📦 Central Control Panel ABS, matte black, precision-fit 🔗 Double-Sided Adhesive Pre-applied or supplied separately 📋 Installation Guide Clear step-by-step instructions Product Highlights High-quality ABS construction for durability and impact resistance Matte finish eliminates glare and suits modern cabin aesthetics Precision-engineered tolerances ensure flush fit with factory panels Pre-measured double-sided adhesive for hassle-free installation 100% brand new, never used or refurbished Factory-correct colour match and texture No tools or modifications required for installation Lightweight design won't affect vehicle weight distribution Covers wear, scratches, and discoloration on original console Perfect restoration or cosmetic upgrade for X1 and X2 owners Compatibility Vehicle Model Years Drive Compatibility BMW X1 F48 2016–2019 LHD Direct Fit BMW X2 F47 2018–2019 LHD Direct Fit BMW X1 F48 2016–2019 RHD Not Compatible BMW X2 F47 2018–2019 RHD Not Compatible Other BMW Models Any Any Not Compatible Installation Notes Difficulty: Easy | Time: 10–15 minutes Prepare the surface: Clean the central console area with a microfibre cloth and mild alcohol-based cleaner. Remove any dust, grease, or residue. Allow to dry completely (minimum 5 minutes). Position the panel: Dry-fit the panel into place without adhesive. Ensure all edges align perfectly with surrounding trim and that there are no obstructions. Apply adhesive: If adhesive is not pre-applied, carefully apply the double-sided tape to the rear surface of the panel, following the template or existing markings. Press into place: Firmly press the panel onto the console, working from the centre outward to avoid air pockets. Hold pressure for 30 seconds. Cure time: Avoid touching or moving the panel for at least 24 hours to allow the adhesive to set fully. ⚠️ Important: This panel is adhesive-only and cannot be removed without risk of damage. Test fit thoroughly before final installation. Ensure your console is clean and dry for maximum adhesion strength. Transform Your BMW Interior Today Refresh your X1 or X2 cabin with a factory-quality central control panel that looks and fits like it came straight from the factory floor. Premium ABS construction, perfect fit, simple install. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars – 12,300+ Reviews ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket automotive specialist and is not affiliated with BMW AG, Bayerische Motoren Werke, or any official BMW distributor. All product descriptions, fitment information, and compatibility claims are provided for reference only. Customers are responsible for verifying compatibility with their specific vehicle variant before purchase. Installation of aftermarket products may affect warranty coverage; consult your dealer if concerned. All sales are final unless covered under our 30-day money-back guarantee.

Automotive · BMW Interior · Trim Accessories Carbon Fiber Style Gear Shift Head Cover Trim – BMW X1 F48 & 2 Series F46 Premium ABS carbon fibre finish elevates your interior with a sophisticated, modern aesthetic that commands attention. X1 F48 2 Series F46 2015–2017 Carbon Fiber Style ABS Plastic Easy Install Overview Your BMW X1 F48 or 2 Series 218i Gran Tourer F46 deserves interior finishes that reflect its premium engineering. This carbon fibre style gear shift head cover trim is engineered to transform your centre console with a contemporary, upmarket appearance whilst maintaining complete OEM compatibility. Crafted from high-grade ABS plastic with an authentic carbon fibre weave texture, this trim piece slides seamlessly into your cabin's design language. The finish is scratch-resistant, UV-stable, and designed to withstand daily use without fading or peeling. Installation is straightforward—no drilling, cutting, or modification required. Whether you're upgrading an existing interior or completing a bespoke customisation project, this gear shift cover instantly elevates the perceived quality of your cockpit. Pair it with other interior trim accents for a fully cohesive look that turns heads every time you grip the gear knob. What's Included 📦 Gear Shift Head Cover Trim Premium ABS with carbon fibre finish 📋 Installation Instructions Step-by-step guidance + fitment tips ✔️ Pre-Fitted Template Ensures precise alignment first time Product Highlights Authentic carbon fibre texture with premium gloss finish High-quality ABS plastic—lightweight yet durable Pre-contoured to match your gear knob enclosure perfectly Double-sided automotive-grade adhesive backing No drilling, cutting, or professional installation needed UV-stable formula resists fading and discolouration Scratch-resistant surface withstands daily handling Adds sophisticated visual depth to your centre console Compatible with both manual and automatic transmissions Backed by our 30-day money-back guarantee Compatibility Vehicle Model Year Range Fitment BMW X1 F48 2016–2017 Direct Fit BMW 2 Series 218i Gran Tourer F46 2015–2017 Direct Fit Other BMW models — Not Compatible Always verify your vehicle model and build code before purchase. Contact our team if you're unsure about fitment. Installation Difficulty Level: Beginner | Time: 10–15 minutes Clean the surface: Use rubbing alcohol and a lint-free cloth to thoroughly clean the existing gear shift head area. Allow to air dry completely. Position the trim: Carefully align the cover trim with your gear knob enclosure. Start from the centre and work outward to avoid air bubbles. Apply pressure: Press firmly across the entire surface for 30–60 seconds to activate the adhesive bond. Set cure time: Allow 24 hours before using the gear shift to ensure maximum adhesive strength. Inspect edges: Once cured, check all perimeter edges are fully seated. Apply extra pressure if needed. Note: Ensure the interior is clean and dry before installation. Do not apply in temperatures below 10°C or above 40°C for optimal adhesive performance. If repositioning is needed within the first hour, gently peel back and reapply. Why Choose Victorious Automotive We specialise in premium automotive interior and exterior upgrades for discerning drivers who refuse compromise on quality. Every product in our collection is hand-selected, tested, and backed by our promise: if you're not completely satisfied, we'll refund you within 30 days, no questions asked. Our team has over a decade of experience sourcing and fitting bespoke accessories across BMW, Mercedes, Land Rover, and Range Rover platforms. We're not just sellers—we're automotive enthusiasts who understand what drives your passion. Ready to Elevate Your Interior? Transform your gear shift area with premium carbon fibre styling. Fast worldwide shipping, expert support, and a full 30-day guarantee included. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9★ Rating · 12,300+ verified reviews 🌍 Worldwide DHL, FedEx, UPS, TNT shipping 📞 +44 203 943 9919 · Mon–Fri 9am–7pm ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with, endorsed by, or connected to BMW, Bayerische Motoren Werke AG, or any of their subsidiaries. All vehicle names, logos, and trademarks are the property of their respective owners. This product is a non-OEM aftermarket accessory designed for fitment purposes only. We recommend professional installation if you are unfamiliar with automotive trim work. Victorious Automotive accepts no liability for improper installation or vehicle damage resulting from product misuse.

BMW · X1 / X2 · Interior Trim Carbon Fiber Style ABS Chrome Dashboard AC Vent Cover – BMW X1 F48 & X2 F47 Premium carbon fiber aesthetics with durable ABS construction and effortless installation for a refined cockpit upgrade. BMW X1 F48 BMW X2 F47 2016–2019 ABS Carbon Dashboard Trim Overview Transform your BMW X1 F48 (2016–2019) or X2 F47 (2018–2019) interior with this precision-engineered AC vent cover. Designed specifically for these models, it replaces the factory chrome trim with a modern, high-end carbon fiber aesthetic that elevates your dashboard's visual hierarchy. Crafted from durable ABS material with an authentic carbon fiber finish, this cover delivers premium appearance without compromise on longevity. The sleek profile integrates seamlessly with the original vent housing, maintaining factory proportions while introducing a contemporary technical accent to your cabin. Installation is straightforward: pre-applied double-sided adhesive backing and a clean, dry surface is all you need. No drilling, no permanent modifications—a reversible upgrade that respects your vehicle's integrity while expressing your attention to detail. What's Included 📦 AC Outlet Vent Cover Set Carbon fiber style ABS trim ✓ Pre-Applied Adhesive Double-sided tape backing Product Highlights Authentic carbon fiber finish for premium visual impact Durable ABS construction resists warping and UV fade Precision-fit for BMW X1 F48 and X2 F47 vent housings Double-sided adhesive backing—no tools required Direct replacement of factory chrome trim Contemporary design complements modern dashboards Completely reversible—no permanent modifications Weather and temperature resistant material Lightweight profile maintains factory proportions Single installation—fits seamlessly into existing vent Compatibility Model Years Status BMW X1 F48 2016–2019 Direct Fit BMW X2 F47 2018–2019 Direct Fit Installation Difficulty Level: Beginner Time Required: 10–15 minutes Power off climate control and allow the dashboard to cool to room temperature. Locate the AC vent housing on the dashboard—factory chrome trim will be visible. Clean the existing chrome surface thoroughly with a dry, lint-free cloth. Remove any dust, oils, or residue. Peel away the pre-applied adhesive backing from the carbon fiber cover. Align the cover precisely with the vent opening and press firmly into place, starting from the centre and working outward. Hold pressure for 10–15 seconds to ensure full adhesion. Allow adhesive to cure for 24 hours before operating the air conditioning. Important: Ensure the surface is completely clean and dry before installation. Any moisture or debris will compromise adhesion and longevity. Do not operate the air conditioning until the adhesive has fully cured. Upgrade Your Cockpit Today A small detail. A significant impression. This carbon fiber vent cover is the kind of refined accent that BMW owners notice—and that you'll appreciate every time you step inside. Shop Now Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🌍 Worldwide shipping – DHL, FedEx, UPS ✓ 30-day guarantee – Full refund, no questions Victorious Automotive is not affiliated with BMW AG, Bayerische Motoren Werke, or Jaguar Land Rover. All vehicle names, logos, and specifications are the property of their respective manufacturers. This product is designed for aftermarket installation and is not endorsed by the vehicle manufacturer.

BMW Exterior · X1 F48 · Fog Light Trim BMW X1 F48 Carbon Fibre Style Fog Light Covers – Set of 2, Chrome Trim Premium carbon fibre aesthetics with durable chrome finish for effortless front-end refinement. F48 2016–2018 Carbon Fibre Style Chrome Finish Direct Fit Overview The BMW X1 F48 (2016–2018) is a compact crossover engineered for agility and presence on urban streets and country roads alike. These fog light covers elevate the front fascia with a contemporary carbon fibre aesthetic that complements the X1's purposeful stance. Our carbon fibre style covers are precision-crafted in high-quality ABS plastic with a chrome-trimmed edge, delivering the visual impact of motorsport-inspired design without compromising durability. Each set includes left and right covers that integrate seamlessly with your vehicle's existing geometry—no modifications required. Whether you're refreshing a daily driver or preparing for a weekend drive, these covers offer immediate visual uplift, practical light protection, and installation that respects your time and investment. What's Included ⬛ Left Fog Cover Carbon fibre finish with chrome trim ⬛ Right Fog Cover Carbon fibre finish with chrome trim Product Highlights Carbon fibre style finish for premium aesthetic appeal Durable ABS plastic construction resists UV and weathering Chrome-trimmed edges add distinction and depth Precise fit—engineered for F48 fog light geometry Direct installation without body modifications Protects fog lights from road debris and minor impact Lightweight design maintains handling balance Compatible with OE and aftermarket lighting setups Easy to clean and maintain Pair with other F48 exterior upgrades for cohesive styling Compatibility Model Year Range Status BMW X1 F48 2016–2018 Direct Fit BMW X1 F48 (Pre-2016) Before 2016 Not Compatible BMW X1 F48 (Post-2018) 2019+ Not Compatible Other BMW Models All Years Not Compatible Installation Difficulty Level: Beginner | Time Required: 15–20 minutes per side Park on level ground and ensure the engine is cool. Open the bonnet and locate the fog light housing on the driver's side. Gently remove any existing trim clips or fasteners holding the old cover (if applicable). Align the new carbon fibre cover with the fog light opening and the mounting points. Secure using OE clips or the provided adhesive tabs—press firmly for 30 seconds. Repeat steps 2–5 for the passenger side. Verify both covers sit flush and symmetrically; test fit with lights on to confirm proper alignment. Allow adhesive to cure for 2 hours before driving, if applicable. Note: If your X1 has been previously modified or has non-standard bumper components, verify fitment before final installation. Professional fitting is always recommended for peace of mind. Ready to Refine Your X1 These carbon fibre style fog light covers transform the front-end character of your F48 in minutes. Clean, modern, and built to last. Shop Now Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide DHL, FedEx, UPS, TNT shipping ✓ 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: This product is not affiliated with, endorsed by, or authorised by BMW AG or Bayerische Motoren Werke. "BMW," "X1," and all related marks are registered trademarks of BMW AG. This listing describes an aftermarket accessory. Always verify vehicle compatibility before purchase. Victorious Automotive is an independent retailer of premium automotive accessories.

BMW · X1 F48 & X2 F47 · Interior Trim BMW X1 F48 & X2 F47 Carbon Fiber Style Center Console Trim Elevate your interior with premium carbon fiber styling that transforms your center console in minutes. F48 / F47 2016–2018 ABS Plastic Carbon Fiber No Modifications Overview The BMW X1 F48 (2016–2018) and X2 F47 (2018) are compact SUVs engineered for style and performance. To match that precision, your interior deserves the same attention to detail that BMW applied to the exterior. This premium carbon fiber style center console trim elevates the X1 and X2's cabin aesthetic with a sleek, modern finish. Crafted from high-quality ABS plastic with an authentic carbon fiber appearance, this trim piece adds visual depth and sophistication to your dashboard without compromising durability or function. Installation is straightforward—no drilling, cutting, or modifications required. Whether you drive left-hand or right-hand configuration, this trim fits both perfectly, delivering instant visual impact and a more premium feel every time you sit behind the wheel. What's Included 📦 Center Console Trim Strip Premium ABS plastic, carbon fiber finish ✓ Pre-Fitted Design Ready to install, no adjustments needed Product Highlights Premium ABS plastic with authentic carbon fiber appearance Direct fit for X1 F48 and X2 F47—no modifications required Universal compatibility with left-hand and right-hand drive vehicles Enhanced interior aesthetics with minimal installation effort Durable, impact-resistant construction for long-term use Factory-finished edges and seamless integration Easy to clean and maintain with standard interior care products Lightweight design—no additional burden on your vehicle Elevates cabin ambiance without altering vehicle function Perfect complement to other interior upgrades and customizations Compatibility Vehicle Model Year Range Drive Config Status BMW X1 F48 2016–2018 LHD / RHD Direct Fit BMW X2 F47 2018 LHD / RHD Direct Fit Compatibility Note: Verify your vehicle's model year and body code (F48 or F47) before ordering. This trim is not compatible with earlier or later generation models. Installation Guide Difficulty Level: Beginner | Time: 10–15 minutes Ensure your vehicle is parked safely with the engine off and the interior at room temperature. Carefully examine the center console area to identify the mounting location for the trim strip. Clean the console surface with a dry, lint-free cloth to remove dust and debris. Align the trim strip with the center console opening, ensuring proper fit on both sides. Gently press the trim into place, applying even pressure across the entire strip until it sits flush. Check all edges and corners to confirm secure installation and proper alignment. Allow the adhesive (if applied) to set for 24 hours before using the center console. Wipe the finished trim with a soft microfiber cloth for a polished appearance. Important: Do not force the trim into place. If resistance is felt, remove and recheck alignment. Always follow the vehicle's manual for interior component safety guidelines. Ready to Upgrade Your Interior? Transform your BMW X1 or X2 cabin with premium carbon fiber styling. This center console trim delivers instant visual impact with zero fuss—order now and elevate your driving experience. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 Stars (12,300+ Reviews) ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW dealer. All vehicle names, logos, and specifications are used for reference and compatibility purposes only. Product fitment and compatibility are the buyer's responsibility to verify before purchase.

BMW · X1 F48 / X2 F47 · Interior Trim Carbon Fiber Console Gear Shift Cover Trim for BMW X1 F48 & X2 F47 LHD Premium carbon fiber finish console trim with seamless fitment and tool-free installation. X1 F48 2016–2018 X2 F47 2018 Carbon Fiber Design LHD Only ABS Chrome Self-Adhesive Overview Designed specifically for the BMW X1 F48 (2016–2018) and BMW X2 F47 (2018), this carbon fiber gear shift cover trim elevates your vehicle's interior with a sophisticated, modern aesthetic. The sleek console decoration integrates seamlessly with your dashboard, transforming the gear shift surround into a premium focal point. Crafted from high-quality ABS material with a carbon fiber finish, this trim delivers durability alongside visual impact. The chrome detailing enhances light reflection and adds an upscale touch that complements modern BMW interiors. Whether you're looking to refresh a tired dashboard or personalize your cabin, this piece strikes the perfect balance between form and function. Installation is effortless—the double-sided adhesive backing requires no drilling, clips, or additional tools. In minutes, you'll have a bespoke interior upgrade that feels factory-fitted. What's Included 📦 Gear Shift Cover Trim 1× carbon fiber ABS trim piece 📋 Installation Guide Step-by-step fitting instructions 🛡️ Protective Packaging Secure OPP bag with foam protection Product Highlights Carbon fiber finish for premium, modern appearance High-quality ABS material with chrome accents Seamless fit—engineered for exact BMW geometry Double-sided adhesive—no tools or drilling required Durable and long-lasting construction Enhances cabin ambiance without modification 100% brand new, factory sealed Perfect alignment with OEM console design Resistant to fading and daily wear Tool-free installation in under 10 minutes Compatibility Vehicle Model Year Range Drive Type Fit Status BMW X1 F48 2016, 2017, 2018 Left-Hand Drive (LHD) Direct Fit BMW X2 F47 2018 Left-Hand Drive (LHD) Direct Fit BMW X1 F48 2016–2018 Right-Hand Drive (RHD) Not Compatible Other BMW Models All Years All Not Compatible Installation Difficulty Level: Easy | Time: 5–10 minutes Clean the surface. Wipe the gear shift console area thoroughly with a lint-free microfiber cloth and mild cleaner to remove dust and oils. Allow to dry completely. Position the trim. Carefully align the carbon fiber cover with the gear shift surround. Take time to ensure it sits flush with surrounding trim pieces. Apply adhesive. Peel back one corner of the protective backing and press firmly onto the console. Work gradually, pressing down as you remove the backing strip. Secure fully. Once positioned, apply firm, even pressure across the entire surface for 30 seconds to ensure strong adhesion. Allow cure time. Leave the trim undisturbed for 24 hours before using the gear shift. This ensures maximum durability. Important: Ensure your vehicle model matches the compatibility table above. This trim is designed for LHD X1 F48 and X2 F47 vehicles only. Double-check your model code before purchase. Do not install on right-hand drive variants. Ready to Elevate Your Interior? Transform your BMW console with this premium carbon fiber trim. Engineered for perfect fitment, backed by our 30-day money-back guarantee, and delivered worldwide with care. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW distributor. All product names, logos, and brands are the property of their respective owners. This product is designed as a non-structural interior enhancement and does not modify vehicle safety systems or performance.

```html BMW · X1 F48 / X2 F47 · Interior Trim BMW X1 F48 & X2 F47 Carbon Fiber Side AC Vent Trim – 4-Piece Set Upgrade your cabin with premium carbon fiber air vent covers that deliver luxury detail and seamless OEM fitment. F48 2016–2018 F47 2018+ Carbon Fiber ABS Chrome Accents 3M Adhesive Plug & Play Overview The BMW X1 F48 (2016–2018) and X2 F47 (2018+) deserve interior details that match their premium engineering. These carbon fiber side AC vent trim covers elevate your cabin aesthetic with a race-inspired finish that catches light and adds visual depth to your dashboard. Built from durable ABS plastic with a hand-finished carbon fiber texture, this 4-piece set wraps your console air vents in modern luxury. Each cover is precisely cut and moulded to fit seamlessly against the original trim, with zero gaps or overhang. Installation is tool-free—3M adhesive backing handles everything, and you'll have it done in under 15 minutes. Why upgrade? Standard plastic vents age quickly and lack presence. These carbon fibre covers inject personality into a crucial interior focal point, complementing sportline, M-Sport, and stock trims alike. The subtle chrome edge banding prevents that flat look and ties the whole cabin together. What's Included 📦 4x Vent Covers Left & right console, passenger & driver-side AC vents 🧴 3M Adhesive Backing Pre-applied, removable within 24 hours if needed 📋 Installation Guide Step-by-step photo instructions included 🔒 Fitment Guarantee 30-day money-back guarantee on all items Product Highlights Premium carbon fibre ABS construction with tactile weave texture OEM-spec fitment with zero drilling, cutting, or modification required Chrome edge accents for contrast and premium detail 3M automotive-grade adhesive backing for permanent hold Lightweight design—adds visual impact without weight penalty UV-resistant finish resists fading in direct sunlight Hydrophobic surface sheds water, dust, and oils easily Factory-matched colour integration with X1 & X2 cabin design Suitable for all trim levels—SE, xDrive, M Sport, Luxury Made to automotive durability standards; 3-year longevity guarantee Compatibility Model Year Range Fitment BMW X1 F48 2016–2018 Direct Fit BMW X2 F47 2018+ Direct Fit BMW X1 F49 (G11) 2023+ Not Compatible BMW X3 / X4 All years Not Compatible Fitment Note: This set is engineered exclusively for F48 and F47 generation X1 and X2. Verify your vehicle generation before purchase to avoid fitment issues. Installation Difficulty: Beginner | Time: 10–15 mins Clean the vent surface. Use a microfibre cloth with isopropyl alcohol to remove dust, oils, and residue. Allow 5 minutes to dry completely. Peel the adhesive backing. Slowly remove the protective paper layer from the back of each cover. Do not touch the adhesive surface. Align the first cover. Position on the driver-side console vent. Start from the top edge and press downward slowly to avoid air bubbles. Press firmly for 30 seconds. Apply steady pressure across the entire surface, especially along the edges. Repeat for remaining covers. Follow the same process for the passenger console vent and both rear cabin vents (if included). Allow 24 hours cure time. Avoid touching, cleaning, or vibration until the adhesive fully sets. Do not open air vents for at least 6 hours. Pro Tip: Work in a warm, dry environment (18–25°C). Cold temperatures slow adhesive activation. If repositioning is needed within 24 hours, gently peel and re-apply without loss of hold. Ready to elevate your X1 or X2? These carbon fibre vent covers deliver the interior refresh your BMW deserves. Precision fitment, premium materials, and tool-free installation make them the smart choice for discerning owners. Shop Now Use code 22GET20 for 20% off when you buy any 2 items from our BMW collection. 30-day guarantee – full refund if not satisfied 4.9★ – 12,300+ verified reviews Worldwide shipping – DHL, FedEx, UPS, TNT Expert support – +44 203 943 9919, Mon–Fri 9am–7pm Victorious Automotive is not affiliated with BMW AG, Bayerische Motoren Werke, or any official BMW subsidiary. All product names, logos, and trademarks are the property of their respective owners. This product is designed as an aftermarket accessory and is sold as-is without warranty from the vehicle manufacturer. ```

```html Victorious · Tesla Model 3 · Storage & Protection Rubber Rear Trunk Storage & Front Trunk Protective Mats – Tesla Model 3 (2021) – 3-Piece Set Premium TPE floor protection that shields your Model 3's trunk and frunk from water, dirt, and wear. T3 2021 Model Year TPE Material Waterproof 3-Piece Set Odourless Overview Tesla Model 3 owners demand interior solutions that combine durability with minimal aesthetic compromise. Storage areas—particularly the rear trunk and front trunk (frunk)—are vulnerable to moisture, dirt transfer, and surface wear that can diminish your vehicle's condition over time. This three-piece protective mat set is engineered specifically for the 2021 Tesla Model 3, offering bespoke coverage for both trunk compartments and the front storage area. Each mat is precision-fitted to your vehicle's geometry, eliminating gaps and ensuring complete protection where it matters most. Made from thermoplastic elastomer (TPE)—the same premium material found in high-end automotive applications—these mats resist water penetration, resist heat degradation, and maintain their integrity through years of daily use. The textured anti-slip surface keeps cargo secure whilst the odourless formulation ensures your cabin air quality remains pristine. What's Included 🔲 Rear Luggage Compartment Mat Custom-fit for main trunk area 📦 Front Box Mat Protects frunk storage zone 🛡️ Trunk Storage Mat Secondary coverage for rear area Product Highlights Custom-Fit Design — Tailored precisely for 2021 Model 3 geometry Premium TPE Material — Elasticity, impact resistance, and exceptional durability Waterproof & Water-Resistant — Blocks moisture penetration completely Odourless Formula — No off-gassing or unpleasant chemical smell Anti-Slip Texture — Keeps cargo and items from shifting during travel Heat & Flame Resistant — Maintains structural integrity at temperature extremes Eco-Friendly Composition — Sustainable material with minimal environmental impact Easy Cleaning — Wipe with soft cloth or rinse with water pressure system Non-Staining Finish — Won't discolour trunk surfaces or carpets Long Service Life — Engineered for multi-year protection without cracking or fading Compatibility Tesla Model Year Range Fit Status Model 3 (Standard/Long Range/Performance) 2021 Direct Fit Model 3 (Refresh/Highland) 2024+ Not Compatible Model 3 (Early Generation) 2017–2020 Not Compatible Model Y / Model S / Model X All Years Not Compatible Compatibility Note: These mats are precision-engineered for the 2021 Tesla Model 3 only. Verify your vehicle model year before ordering to ensure optimal fit and functionality. Installation Installation Overview Difficulty: Beginner · Time Required: 5–10 minutes Open your Model 3's rear trunk and frunk compartments completely. Inspect the flat surfaces for debris, dust, or moisture and wipe clean with a dry cloth. Position the rear luggage compartment mat first, aligning its edges with the trunk perimeter and securing any adhesive strips or clips provided. Install the front box mat into the frunk, ensuring it lies flat and all corners are seated properly. Place the secondary trunk storage mat in the designated zone, layering carefully if required by design. Press down firmly across all surfaces to ensure full contact and secure seating. Close trunk and frunk gently and allow any adhesive to set for 24 hours before loading cargo. Important: Do not fold, crease, or force mats into place. TPE material is durable but should be positioned gently to maintain longevity and fit integrity. Protect Your Model 3 Today Your Tesla Model 3 deserves interior protection that's as smart as its engineering. These precision-fit TPE mats safeguard your trunk and frunk against years of moisture, dirt, and wear—preserving resale value and maintaining showroom condition. Shop Trunk Mats Use code 22GET20 for 20% off when ordering any 2 items ⭐ 4.9/5 Stars ✓ 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Tesla, Inc., or any official Tesla subsidiary. All vehicle names and trademarks are the property of their respective manufacturers. Product compatibility is determined by vehicle model year and configuration; always verify before purchase. ```

Victorious · Land Rover · Key Covers Suede Leather Car Key Case Cover For Land Rover Range Rover Sport Evoque Discovery Jaguar Premium suede and alloy key protection designed for modern Land Rover and Jaguar ownership—refined aesthetics meets everyday durability. A9 Smart Key Compatible Suede Leather + Zinc Alloy Range Rover Sport L494 Range Rover Evoque L538/L551 Discovery 3, 4, 5 & Sport Jaguar XE, XJ, XJL, XF Full Cover Design Red / Brown / Black Overview If you own a modern Land Rover Range Rover Sport, Evoque, or Discovery—or a contemporary Jaguar XE, XJ, or XF—your proximity key deserves better than pocket lint and accidental scuffs. This SENFEEL suede leather key case combines soft-touch luxury materials with engineered protection, keeping your A9 remote in pristine condition for years to come. Built from premium suede leather exterior and reinforced with zinc alloy and TPU internals, every detail speaks to careful ownership. The full cover design sits flush against your key's contours, protecting against drops, scratches, and UV fading while maintaining the minimalist elegance that defines modern British automotive design. Available in refined red, warm brown, and classic black—each finish subtle enough for daily use, premium enough to complement your vehicle's interior. Installation takes seconds: simply slide your key into the protective sleeve and secure it. No tools, no permanent modifications. Whether you're parking at Heathrow or heading into the Cotswolds, your key remains protected and instantly recognizable. What's Included 🎁 Suede Leather Key Case Premium full-cover protective sleeve for A9 smart keys ⚙️ Zinc Alloy Hardware Reinforced internal frame for durability and structural integrity 🛡️ TPU Protective Layer Shock-absorbing inner lining to safeguard key electronics 📦 Ready to Install No tools required—instant protection for your key fob Product Highlights Premium suede leather exterior with tactile, grip-friendly finish Zinc alloy reinforced frame for impact and drop protection TPU shock-absorbing layer shields key electronics from damage Full cover design protects entire A9 smart key fob Zero-tool installation—simply slide key into protective sleeve Available in three sophisticated finishes: red, brown, black Compatible with 2013–2020 Range Rover Sport, all Evoques, Discoveries Works with modern Jaguar XE, XJ, XJL, XF models Lightweight and slim—no added bulk to pockets or bags Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Generation Years Fitment Range Rover Sport L494 2013–2020 Direct Fit Range Rover Sport L461 (New) 2022–2026 Direct Fit Range Rover Evoque L538 2015–2022 Direct Fit Range Rover Evoque L551 2022–2026 Direct Fit Land Rover Discovery 3 / 4 / 5 2004–2022 Direct Fit Land Rover Discovery Sport L550 2015–2026 Direct Fit Land Rover Freelander 2 L359 2006–2015 Direct Fit Jaguar XE C2C8159 2015–2026 Direct Fit Jaguar XJ / XJL X351 2009–2026 Direct Fit Jaguar XF X250 / X260 2008–2026 Direct Fit Jaguar C-X16 Concept Concept 2011 Display Only Installation Notes Difficulty: Beginner | Time: 2 minutes | Tools: None Examine your A9 smart key fob, noting its size and button configuration. Open the protective suede leather case and inspect the TPU inner lining for proper alignment. Carefully slide your key fob into the case, ensuring buttons remain accessible through the fabric openings. Gently press the case closed around the fob—it should sit snugly without excessive pressure. Test all key functions (lock, unlock, boot release) to confirm normal operation through the protective layer. Store your protected key in a pocket, bag, or on a keychain ring loop if available. Before use: Test your key fob's remote functions while still in its original factory casing to establish a baseline. If you notice reduced signal strength after fitting this cover, remove it immediately and contact Victorious support. Suede leather will naturally age and patina over time; this is a sign of quality craftsmanship, not defect. Protect Your Key. Perfect Your Details. Premium suede leather protection for every Land Rover and Jaguar owner who understands that true luxury lives in the small touches—the ones only you and your valet notice. Shop Suede Leather Key Cases Use code 22GET20 for 20% off when you purchase any 2 Victorious accessories. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Tata Motors. All vehicle names and model codes are registered trademarks of their respective manufacturers, used here only for compatibility reference. This product is an aftermarket accessory and does not modify, replace, or supersede factory key fobs or their functionality. Always test your key remote after installation. For technical support, contact Victorious Automotive directly.

Victorious Automotive · Defender L663 · Exterior Upgrades Raised Air Intake Snorkel for Land Rover Defender 90/110 L663 (2020–2026) A purpose-built raised air intake system that keeps your Defender engine breathing clean, dry air through the deepest water crossings and the dustiest trails on earth. Defender L663 2020–2026 Direct Fit LLDPE / ABS Construction UV-Resistant Water & Dust Intake Exterior Upgrade Black Overview The reborn Land Rover Defender L663 is engineered from the ground up for serious off-road performance — but even the most capable 4x4 has limits when its stock air intake path dips dangerously close to water, mud, and fine particulate. Whether you're navigating river crossings in the Highlands, desert tracks in North Africa, or technical trail work in the Alps, standard intake positioning leaves your engine exposed to exactly the conditions it shouldn't encounter. This raised air intake snorkel is designed specifically for the 2020-onward Defender 90 and 110 (L663 platform), relocating the intake point high up the A-pillar where clean, cool, dry air is always available. Constructed from UV-resistant linear low-density polyethylene (LLDPE) with ABS componentry, the kit is built to endure the same punishment you throw at your Defender — season after season, expedition after expedition. Beyond water crossing protection, the benefits extend into everyday performance. Elevated air intake positioning means cooler, denser air reaches your engine more consistently, improving combustion efficiency, reducing air filter loading, and extending service intervals. For Defender owners who use their vehicles as intended, this is one of the highest-value exterior upgrades available. What's Included 🔧 Snorkel Body Full-length A-pillar tube with formed bends, pre-cut to fit L663 profile 🌬️ Air Ram Intake Head Directional head with built-in drainage outlets for water and dust dispersion 🔩 Mounting Hardware Kit All bolts, brackets, and fixings required for a complete installation 🛠️ Intake Hose & Clamps Flexible connector hose and stainless clamps for sealed airbox connection 📋 Installation Guide Step-by-step fitting instructions specific to the Defender L663 Product Highlights Precision-engineered specifically for the Land Rover Defender 90 and 110 L663 platform (2020 onward) Built from UV-resistant LLDPE — resists warping, cracking, and fading under prolonged sun and heat exposure Air ram intake head features dedicated drainage outlets to actively expel water droplets and fine dust before they enter the intake tract Relocates the air intake to the highest practical point on the A-pillar, maximising water crossing depth capability Cooler, cleaner intake air improves combustion efficiency and can contribute to improved fuel economy on longer runs Significantly reduces air filter contamination in dusty environments, extending filter service life and reducing maintenance costs Finished in satin black to complement the Defender's exterior aesthetic with a factory-integrated appearance ABS plastic construction on key components provides structural rigidity and impact resistance during trail use Compatible with both petrol and diesel Defender L663 engine variants — no engine-specific modifications required Package dimensions of 113×31×18 cm ensure all components arrive securely packaged and ready for installation Compatibility Vehicle Platform Year Range Fitment Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Land Rover Defender 90/110 L316 (Classic) Pre-2016 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 2–3 Hours  ·  Tools Required: Yes Begin by removing the front A-pillar trim panel on the driver's side (or passenger side depending on market) to expose the mounting surface and existing intake routing. Disconnect the original factory air intake hose from the airbox and set aside. Do not damage any factory clips or retaining tabs — these may be reused. Dry-fit the snorkel body against the A-pillar to confirm alignment with the pre-drilled mounting points. Mark any panel locations requiring drilling prior to making permanent cuts. Carefully drill mounting holes through the A-pillar bodywork using the template or dimensions provided in the installation guide. Deburr and treat all cut edges with a rust inhibitor before proceeding. Secure the snorkel body to the A-pillar using the supplied brackets and fasteners. Ensure all fixings are torqued to specification — do not over-tighten against the LLDPE body. Route the intake connector hose from the base of the snorkel body down to the airbox inlet. Secure with the supplied stainless clamps, ensuring the connection is fully sealed with no air gaps. Attach the air ram intake head to the top of the snorkel tube, orienting the drainage outlets rearward and downward as directed. Confirm the head rotates and locks securely. Refit all trim panels, start the engine, and check for abnormal intake noise or airflow restriction. Inspect all clamp points for security before driving. ⚠ Important: Professional installation by a qualified mechanic or 4x4 specialist is strongly recommended. Drilling into the A-pillar bodywork is irreversible — confirm fitment and alignment thoroughly before cutting. Improper installation may void your vehicle's warranty. If you have any doubts, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll point you in the right direction. Built for the Defender. Built for Wherever You Take It. At Victorious Automotive, every product we stock is chosen for owners who actually use their Defenders. This snorkel is one of those upgrades that earns its place every single time you encounter standing water, dust, or terrain that asks something real of your vehicle. Shop our full Defender L663 exterior collection and equip yours properly. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of fitment identification. Product images are for illustration purposes only — actual product may vary slightly from images shown.

Victorious Automotive · Defender L663 · Exterior Accessories Red Metal Rear Tow Hooks for Land Rover Defender L663 (2020–2021) — 2-Pack Boldly functional and purpose-built — these anodized red rear tow hooks deliver genuine strength and head-turning style for the Defender L663 platform. Defender L663 2020–2021 Aluminum & Iron Anodized Red Finish Rear Tow Hooks 2-Pack Direct Fit No Drilling Required Overview The Land Rover Defender L663 — relaunched in 2020 — was engineered to conquer environments where most vehicles surrender. From technical off-road trails to urban recovery situations, the Defender demands accessories that match its character: robust, purposeful, and uncompromising. The rear towing area of the 2020–2021 Defender is one of the most visible and functional zones on the vehicle, and the standard finish rarely does justice to the platform's off-road identity. These rear tow hooks are precision-manufactured from a combination of high-grade aluminum and iron, giving them the ideal balance of lightweight rigidity and tensile strength. The anodized red finish is not a paint layer — it's a electrochemical surface treatment that bonds to the metal itself, meaning it won't chip, peel, or fade under UV exposure or trail abuse. The result is a hook that works hard and looks exceptional doing it. Designed as a direct-fit upgrade for the 2020 and 2021 Defender L663, installation requires no specialist tools and no permanent modifications to your vehicle. Whether you're fitting these for genuine recovery use, overlanding preparation, or simply to sharpen the rear aesthetic of your Defender, this 2-pack delivers in every respect. What's Included 🔴 Rear Tow Hook × 2 Anodized red, aluminum & iron construction 🔩 Mounting Hardware All required fasteners included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Direct-fit design for Defender L663 2020–2021 — no modifications needed Dual-material construction: aluminum body with iron reinforcement for maximum strength Anodized finish — not paint — resists chipping, peeling, and UV fading Striking anodized red finish adds a bold, purposeful aesthetic to the rear Lightweight profile does not add unnecessary load to the rear bumper assembly Suitable for trail recovery, towing assistance, and overlanding setups No drilling or specialist tools required for installation High hardness rating — built to handle real-world towing and recovery loads Supplied as a matched 2-pack for symmetrical rear fitment Also available in anodized black for a more stealth-oriented finish Compatibility Vehicle Model Code Year Range Fit Land Rover Defender 90 L663 2020–2021 Direct Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 130 L663 2020–2021 Direct Fit Land Rover Defender L663 L663 2022 onwards Verify Before Ordering Classic Defender (pre-2020) L316 All Years Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 Minutes  ·  Tools Required: Basic Hand Tools Park your Defender on a level surface and ensure the vehicle is switched off and the handbrake is engaged before beginning work. Locate the existing rear tow hook mounting points on the rear bumper assembly — these are factory-threaded positions on the 2020–2021 L663. If factory tow hooks or blanking covers are fitted, remove them carefully using the appropriate socket or spanner. Retain any original hardware in case of future reinstatement. Align the new red tow hooks with the mounting points, ensuring correct orientation — hooks should face outward and slightly downward in the resting position. Insert the supplied mounting hardware and tighten to a firm, secure torque. Do not overtighten, as this may stress the aluminum body of the hook. Repeat for the second hook on the opposite mounting point, ensuring both are symmetrically aligned. Inspect both hooks for security and confirm there is no movement or play before returning the vehicle to use. ⚠ Important: These tow hooks are designed as a styling and light-duty recovery aid. Always verify your specific model year and bumper configuration before installation. If in doubt, consult a qualified Land Rover technician. Do not use these hooks for high-load towing beyond their rated capacity. Built for Defenders. Chosen by Enthusiasts. Explore our full range of Defender L663 exterior accessories — each product hand-selected for quality, fitment accuracy, and the standard Defender owners expect. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always confirm compatibility with your specific vehicle configuration before purchase or installation.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Real Carbon Fiber Center Console AC Panel Frame Cover Trim for Range Rover Sport L494 (2014–2017) Elevate the heart of your Sport's cabin with a genuine woven carbon fiber AC panel trim that replaces OEM plastic with precision-cut motorsport-grade material. Range Rover Sport L494 2014–2017 Real Carbon Fiber Center Console Trim AC Panel Frame Interior Upgrade Direct Fit No Drilling Required Overview The Range Rover Sport L494 is already one of the most visually compelling SUVs ever produced — a vehicle that walks the line between refined luxury and genuine performance intent. But even factory interiors have their limitations. The centre console AC panel area, with its expanse of moulded plastic, is one of the few zones where the Sport's interior falls short of the visual drama its exterior promises. This real carbon fiber center console AC panel frame cover trim is engineered specifically for the 2014 to 2017 Range Rover Sport L494. It's not a vinyl wrap, a hydrographic print, or an ABS overlay mimicking carbon — this is genuine woven carbon fiber composite, with the tactile depth, structural rigidity, and visual authenticity that only the real material delivers. The tight 2×2 twill weave pattern catches light dynamically, shifting in tone from charcoal black to rich graphite depending on the angle, giving your Sport's interior a finish you'd expect to see in a motorsport paddock rather than a showroom floor. Installation is straightforward and tool-free. The trim uses a precision-engineered adhesive backing designed for long-term bond strength on automotive surfaces — no drilling, no modification, and no risk to your OEM panel. The result is a transformation that looks factory-fitted and feels completely at home in the Sport's performance-forward cabin character. What's Included 🪄 Carbon Fiber AC Panel Trim 1× center console AC panel frame cover — genuine woven carbon fiber composite 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style backing, pre-applied and ready to bond 🧹 Alcohol Prep Wipe For surface degreasing before installation 📋 Installation Guide Step-by-step fitting instructions included in the box Product Highlights Genuine woven carbon fiber composite — not vinyl, not ABS, not hydrographic print Precision-cut to match the OEM AC panel frame dimensions of the L494 Sport exactly 2×2 twill weave pattern for classic motorsport aesthetic and visual depth Lightweight yet structurally rigid — adds no meaningful weight to the interior High-gloss UV-resistant clear coat finish protects against fading and surface wear Tool-free installation using pre-applied automotive-grade adhesive backing No drilling, cutting, or modification to OEM components required Fully reversible — original panel remains undamaged beneath the trim Compatible with all trim levels and engine variants of the 2014–2017 Sport L494 Seamlessly complements other carbon fiber interior accessories for a cohesive finish Compatibility Model Code Year Range Trim Level Fit Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, SVR, Autobiography Direct Fit Range Rover Sport L494 2018–2022 (facelift) All Variants Verify Before Purchase Range Rover Sport L461 2022–2026 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Range Rover Defender L663 2020–2026 All Variants Not Compatible Range Rover Velar L560 2018–2022 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–25 Minutes  ·  🔩 Tools Required: None Park your Range Rover Sport on a level surface and ensure the cabin has reached ambient temperature — avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Use the included alcohol prep wipe to thoroughly clean the OEM AC panel frame surface, removing all dust, grease, fingerprints, and polish residue. Allow the surface to dry completely for at least 2–3 minutes. Dry-fit the carbon fiber trim piece against the panel to confirm alignment and confirm the piece seats flush and level across all edges before committing to the adhesive bond. Carefully peel back the adhesive liner from the rear of the trim, taking care not to touch the adhesive surface with your fingers. Position the trim at the top edge of the panel and press firmly downward, applying sustained pressure across the full surface for 30–45 seconds to activate the adhesive bond. Allow the trim to cure for a minimum of 24 hours before exposing to moisture, cleaning products, or temperature extremes. The bond will reach full strength within 48–72 hours. ⚠ Important: Do not attempt to remove or reposition the trim once the adhesive has made contact with the panel surface. Premature repositioning will compromise bond strength. If you are unsure about fitment, dry-fit thoroughly and use low-tack masking tape as a guide marker before removing the adhesive liner. Upgrade Your Sport's Interior Today Explore our full Range Rover Sport L494 collection for coordinating carbon fiber interior trim, exterior accessories, and more — curated for owners who refuse to compromise on detail. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment compatibility identification and remain the property of their respective owners.

Victorious Automotive · Universal · Car Protection 5-Layer Universal Car Cover – Waterproof & UV Resistant for Sedan & SUV Military-grade all-weather protection for your vehicle, indoors and out. Blocks 80%+ UV rays, water pressure tested to 800mm, and shields against snow, dust, bird droppings, and road salt. 100% Waterproof UV Resistant 5-Layer Polyester Sedan & SUV Indoor & Outdoor S/M/L/XL Sizes Overview Whether you drive a luxury Range Rover, a practical Discovery, or any sedan or SUV up to 187 inches long, your vehicle deserves serious protection. This isn't your typical lightweight cover—it's a five-layer engineered barrier engineered to stand up to British weather and international elements. Built from premium polyester taffeta with military-grade water resistance (800mm water pressure rating), this cover stops rain, sleet, snow, and UV damage in their tracks. The 80%+ reflective summer finish keeps your paint cool when parked in direct sunlight. Winter? It shields against frost, snow accumulation, and road salt spray. The soft inner lining prevents scratching your clear coat, while the outer shell repels bird droppings, tree sap, dust, and airborne contaminants. At just 1kg and available in four sizes, it's light enough to deploy in seconds, yet durable enough to stay in place through wind and weather. Perfect for protected outdoor parking, long-term storage, or year-round garage use. What's Included 📦 5-Layer Car Cover Universal fit, S/M/L/XL 📋 Size Guide Card Measurement reference 🎯 Installation Tips Quick-start instructions 🛡️ 30-Day Guarantee Victorious Automotive promise Product Highlights 5-layer polyester taffeta construction with dual-protection design 800mm water pressure rating – tested against heavy rain and snow melt 80%+ UV reflectivity – keeps paint cooler in summer, blocks harmful rays Soft inner fleece lining – prevents scratches and swirls Fits sedans 360–490cm and SUVs up to 187 inches (460–480cm) Lightweight (1kg) for easy one-person deployment and removal Breathable weave prevents moisture and condensation buildup Elasticated hems and reinforced grommets for secure fitment Suits indoor storage, covered parking, or full outdoor exposure Available in S, M, L, and XL sizes – choose by vehicle length Sizing Guide Vehicle Type Size Vehicle Length Sedan S 360–420 cm Sedan M 420–450 cm Sedan L 450–475 cm Sedan XL 475–490 cm SUV M 420–460 cm SUV L 460–480 cm Installation & Care Deployment (2–3 minutes) Choose the correct size based on your vehicle's length from the guide above Park on level, clean ground away from sharp edges or protruding branches Unpack the cover and lay it flat on your vehicle's bonnet and roof Align the front grommets and secure elasticated hems under the bumper Pull the cover back evenly, securing side and rear hems under the rear bumper Check all edges are tucked and tight—no flapping in wind For outdoor storage, consider additional tie-down cords for high-wind areas Keep Clean: Remove heavy snow or leaf debris regularly to prevent weight buildup. Hose down with cool water monthly to remove dust and salt. Air dry before storage. Protect Your Investment Today Year-round weather protection, indoor or outdoor. Breathable, lightweight, proven. Choose your size and secure your vehicle against the elements—backed by our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back Guarantee ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ 4.9★ 12,300+ Reviews ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any OEM manufacturer. Vehicle names and model codes are used for compatibility reference only. All specifications, dimensions, and performance claims are based on manufacturer testing and real-world user feedback. Always verify size compatibility before purchase. See our full disclaimer at victorious.shop/legal.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 & 130 Aluminum Alloy Silver Door Speaker Cover Panel Trim — Set of 8 A precision-machined set of eight aluminum alloy speaker cover trims that replace the factory plastic finish with a refined, industrial-grade silver aesthetic — purpose-built for the 2020-onwards Defender L663. Defender L663 2020–2026 Set of 8 Aluminum Alloy Silver Door Speaker Trim Peel & Stick ISO9001 Certified Model: XYL0341 Overview The Land Rover Defender L663 was engineered to be capable without compromise — and its interior deserves the same standard. Whether you're driving a 110 or the longer-wheelbase 130, the cabin is a space you spend serious time in, and every surface matters. The door speaker surrounds are a subtle but consistently visible detail, and the factory plastic finish — functional as it is — leaves room for meaningful improvement. These aluminum alloy speaker cover panel trims are machined to match the precise dimensions and mounting geometry of the Defender L663's door speaker housings. Finished in a clean, brushed silver tone, they complement the Defender's utilitarian-meets-refined design language without trying to over-style it. The result is a cohesive upgrade that looks factory-correct but noticeably more premium. The complete set of eight covers every speaker position across the front and rear doors of the 110 and 130, meaning the cabin reads as consistently upgraded throughout — not a piecemeal modification. Installation requires no tools and no permanent modification to your vehicle: each trim bonds cleanly using a professional-grade peel-and-stick adhesive system, making this one of the most impactful interior changes you can make in under an hour. What's Included 🔊 8× Speaker Cover Trims Full set — front and rear door positions covered 🔩 Pre-Applied Adhesive 3M-grade peel-and-stick backing on each trim 📋 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Precision-formed aluminum alloy construction for lasting rigidity and a quality-forward feel Brushed silver finish complements the Defender's interior design language naturally Complete set of 8 trims covers every door speaker position in the 110 and 130 Peel-and-stick installation — no drilling, no screws, no permanent modifications ISO9001 certified manufacturing ensures consistent dimensional accuracy across every piece Engineered specifically for the 2020-onwards Defender L663 body and door profile Lightweight at 300g total, with no impact on door close feel or weight distribution Resistant to everyday cabin wear — UV stable and easy to wipe clean Each trim measures 14cm × 14cm × 3cm for a precise, flush fit against factory panels Immediately reversible — no trace left on the original panels if removed Compatibility Vehicle Model Code Year Range Compatibility Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Start with a clean, dry cabin — allow the vehicle to reach ambient room temperature if possible. Cold interiors (below 10°C) can reduce initial adhesive bond strength. Using a microfibre cloth lightly dampened with isopropyl alcohol, clean each factory speaker panel surface to remove any dust, oils, or residue. Allow to dry fully for 2–3 minutes. Dry-fit each trim piece against its corresponding speaker panel before committing. Confirm alignment and confirm the trim sits flush with no gaps at the edges. Peel the protective backing from the adhesive layer on the first trim. Position carefully over the speaker panel — the adhesive bonds on first contact, so take your time aligning before pressing. Apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Work outward from the centre to avoid air pockets. Repeat for all remaining trims, working systematically across front doors before moving to rear doors. Allow 24 hours before exposing the trims to moisture or direct sunlight, giving the adhesive time to fully cure for a permanent hold. ⚠ Important: Confirm fitment for the Defender 90 before purchasing — speaker panel geometry may differ from the 110 and 130 variants. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for your specific build date and specification. Upgrade Your Defender's Interior Today Explore our full range of Defender L663 interior accessories — designed by enthusiasts, built to the standard your Land Rover deserves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle before purchasing.

Victorious Automotive · Defender L663 · Exterior Trim ABS Black Rear Light Frame for Land Rover Defender 110 L663 (2020–2026) A precision-formed ABS rear light surround that integrates cleanly with the Defender 110's angular exterior, adding a purposeful blacked-out finish to the tail-light cluster without modification. Defender L663 2020–2026 ABS Plastic Gloss Black Rear Light Surround No Drilling Required Adhesive Fit Model: LLK2781 ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that commands attention on any terrain — its upright silhouette, exposed bolt detail, and utilitarian design language are instantly recognisable. For owners who want to sharpen that aesthetic without compromising the Defender's honest character, selective exterior trim upgrades offer the most considered approach. The rear light area, in particular, is a focal point of the Defender's tail-end — and the right surround can transform how the entire rear reads from a distance. This ABS Rear Light Frame has been purpose-built to the exact dimensional profile of the Defender 110 L663 rear light cluster. Manufactured from high-grade ABS thermoplastic and finished in a uniform gloss black, it wraps the perimeter of each light unit with clean, defined lines that complement the Defender's geometric styling. The result is a cohesive, blacked-out rear end that feels intentional rather than aftermarket. Engineered to ISO9001 quality standards, this frame delivers consistent fitment and finish quality you can rely on. The pre-applied automotive-grade adhesive tape on the reverse face means installation is straightforward and residue-free if removal is ever needed. No drilling, no cutting, no specialist tools — just a clean upgrade that looks like it was always there. What's Included 🔲 Rear Light Frame ABS gloss black surround, pre-taped rear 🔧 Adhesive Mounting Tape Automotive-grade, pre-applied to frame 📄 Fitment Guide Step-by-step installation reference Product Highlights Custom-profiled for the Defender 110 L663 rear light cluster — precise panel gap alignment High-grade ABS thermoplastic construction — impact-resistant and UV-stable Uniform gloss black finish — consistent sheen across the full frame profile Pre-applied automotive adhesive tape — no drilling or body modification required ISO9001 certified manufacturing — consistent quality across every unit produced Lightweight design at 1,025g — no perceptible added mass to the vehicle 65cm span covers the full width of the light unit perimeter cleanly Complements Defender black pack and dark exterior trim configurations Tool-free installation — achievable in under 30 minutes by a single person Reversible fitment — adhesive tape allows clean removal without paint damage Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Product Specifications Specification Detail Model Number LLK2781 Material ABS Thermoplastic Colour Gloss Black Item Length 65 cm Item Width 25 cm Item Height 10 cm Item Weight 1,025 g Certification ISO9001 Mounting Method Pre-applied automotive adhesive tape Installation Notes ⏱ Estimated Time: 20–30 minutes  ·  🔧 Difficulty: Beginner Thoroughly clean the rear light surround area on your Defender 110 using an IPA (isopropyl alcohol) wipe. Remove any wax, polish, or silicone residue. Allow to dry completely before proceeding. Dry-fit the rear light frame against the vehicle without removing the adhesive backing. Confirm the profile aligns cleanly with the light unit perimeter and all panel gaps sit evenly. Mark your positioning reference points lightly with a removable marker or masking tape if needed — particularly at the outer corners. Peel the protective backing from the pre-applied adhesive tape. Avoid touching the adhesive surface with bare fingers. Starting from the centre, press the frame firmly into position, working outward toward each end. Apply firm, even pressure across the full surface for at least 60 seconds. Allow a minimum of 24 hours cure time before exposing the vehicle to rain or a car wash. The adhesive bond will reach full strength within 48–72 hours. ⚠ Important: Do not attempt installation on a cold or damp surface. Ambient temperature should be above 10°C for the adhesive to bond correctly. If your vehicle has recently been resprayed, wait at least 30 days before applying any adhesive-backed trim to ensure paint has fully cured. Complete Your Defender's Exterior This rear light frame pairs perfectly with our full range of Defender 110 L663 exterior trim upgrades — from mirror caps and door handle surrounds to bonnet vents and side vents. Build a cohesive look across every panel. Shop Defender 110 (2020) Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and designations referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Protection Front Bumper Guards & Side Trim in Black ABS — Land Rover Defender 110 & 130 (2020+) Purpose-built ABS protection that shields your Defender's front bumper and side edges from daily abrasion — without compromising its purposeful, commanding stance. Defender L663 2020–2024 110 & 130 ABS Plastic Gloss Black Direct Fit No Drilling Model: LLK2782 Overview The Land Rover Defender 110 and 130 are vehicles built to go anywhere — and they do exactly that. Whether you're navigating urban car parks, gravel estate tracks, or the kind of terrain that most vehicles simply refuse, the Defender earns its scuffs honestly. But that doesn't mean you should let them accumulate unchecked. The front bumper, in particular, is one of the most exposed areas on the L663, and even minor kerb strikes or loading bay nudges leave lasting marks on the factory finish. These Black ABS Front Bumper Guards and Side Trim have been designed precisely for the 2020-onwards Defender 110 and 130. Machined from high-grade ABS thermoplastic, they offer a rigid yet lightweight layer of protection that sits cleanly against the bumper's contours, absorbing contact before it reaches the factory surface beneath. The gloss black finish is matched to complement the Defender's bold exterior lines, making these guards as much a styling accent as a functional shield. Installation requires no specialist tools and no modification to the vehicle — the included automotive-grade adhesive tape creates a firm, weather-resistant bond that holds through everything a Defender day demands. For owners who want to preserve their vehicle's condition without altering its character, these guards are the considered choice. What's Included 🛡️ Front Bumper Guard Set 1 complete set, pre-formed to Defender L663 bumper profile 🔲 Side Trim Pieces Matching black ABS side trim for full coverage 📏 Adhesive Mounting Tape Automotive-grade 3M-style tape, pre-cut for each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-formed specifically for the Defender 110 and 130 L663 (2020 onwards) High-impact ABS construction resists cracking, warping, and UV fading Gloss black finish complements both standard and Black Pack Defenders No drilling, no cutting — fully adhesive fitment preserves original bumper Protects against kerb strikes, loading contacts, and low-speed abrasion Lightweight at 500g — no perceptible effect on vehicle weight or handling Weather-sealed bond maintains adhesion in wet, cold, and high-heat conditions Easily removable without residue damage if you need to change or replace Works seamlessly with factory tow hooks and parking sensors Pairs well with wider Defender exterior protection and trim upgrades Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020 – 2024 Direct Fit Land Rover Defender 130 L663 2020 – 2024 Direct Fit Land Rover Defender 90 L663 2020 – 2024 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes 🔧 DIY Friendly · Estimated Time: 20–30 Minutes · No Special Tools Required Park the Defender on a level surface and allow the bumper to reach ambient temperature — avoid fitting in direct sunlight or below 10°C for optimal adhesive performance. Thoroughly clean the bumper and side trim mounting areas using an isopropyl alcohol wipe or panel wipe solution. Remove all wax, grease, and road film. Allow to dry completely. Dry-fit each guard piece to confirm alignment and placement before removing the adhesive backing. Mark position lightly with a soft pencil or painter's tape if needed. Peel the protective liner from the pre-applied adhesive tape and carefully position each piece onto the bumper, pressing firmly from the centre outward to eliminate air pockets. Apply sustained firm pressure across the full surface of each piece for 30–60 seconds. Allow 24 hours of cure time before washing the vehicle or exposing to heavy rain. ⚠ Note: Ensure the bumper surface is completely free of moisture and residue before fitting. Fitting in cold or wet conditions may reduce initial adhesion. Professional installation is recommended if you are unsure about any step. Built for Defenders. Backed by Victorious. Every accessory we stock is chosen for owners who take their Defender seriously. Browse the full Defender L663 exterior collection — or save 20% when you add any two items to your order. Shop Defender L663 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Defender L663 · Side Steps & Running Boards Black Aluminum Side Step Nerf Bar Protector for Land Rover Defender L663 110 (2020–2021) A direct-fit, dual-purpose running board that adds confident cabin entry and discreet side-sill protection to the Defender 110 — finished in a clean matte black that complements the vehicle's bold, utilitarian aesthetic. Defender L663 2020–2021 Aluminum Alloy Black Finish Nerf Bar Protector Running Board Left & Right Set Exterior Upgrade Overview The Land Rover Defender L663 110 sits tall — purposefully so. That commanding ground clearance is one of the defining characteristics of the platform, whether it's being used for daily urban commuting or weekend off-road excursions. But that same ride height can make entry and exit more demanding than it needs to be, particularly for passengers who aren't expecting the step up. These side steps address that directly without compromising the Defender's stance. Constructed from a combination of high-grade aluminum alloy, reinforced steel mounting hardware, and durable plastic trims, this side step set is engineered specifically for the Defender 110 L663 (2020–2021) chassis. The black finish integrates cleanly with the vehicle's existing lower body cladding and underbody trim, giving the impression of a factory-fitted accessory rather than an afterthought. Beyond the aesthetic, the nerf bar profile adds a layer of physical protection to your vehicle's lower sills — guarding against trail debris, kerb strikes, and light impacts. This is a complete left-and-right pair, supplied with all necessary brackets and hardware for a clean, secure installation. If you're building out your Defender for practical daily use or want to elevate its exterior presence without altering its character, these side steps are a well-considered addition that earns its place on the vehicle. What's Included 🪜 Side Step Pedals (Pair) Left & right aluminum nerf bar steps, black finish 🔩 Mounting Brackets Pre-formed steel brackets, chassis-specific fitment 🛠️ Full Hardware Kit All bolts, nuts, and fixings required for installation 📦 Factory Packaging 100% new, sealed in original box — never fitted Product Highlights Direct-fit design engineered specifically for the Defender L663 110 (2020–2021) — no modifications required Premium aluminum alloy construction delivers a strong, lightweight step platform that won't corrode over time Matte black finish aligns with the Defender's OEM lower cladding for a seamless, factory-integrated look Nerf bar profile provides active side-sill protection against debris, trail damage, and kerb impacts Steel mounting brackets ensure a rigid, rattle-free fitment that holds up under repeated daily use Supplied as a complete left and right pair — both sides covered in a single purchase Anti-slip step surface provides confident footing in all weather conditions, wet or dry Low-profile design preserves the Defender's approach and departure angles — no off-road compromise All mounting hardware included — no sourcing additional fixings or visiting a parts counter Arrives 100% new in box — inspected, sealed, and ready to fit straight from the packaging Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 110 L663 2022–2026 Verify Before Purchase Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic socket set, torque wrench Park the Defender on a level surface and ensure the vehicle is secure before beginning work beneath it. Locate the factory side sill mounting points along the underside of the Defender 110 chassis — these are the designated anchor positions for the brackets. Offer up the steel mounting brackets to the chassis and hand-tighten the supplied bolts to confirm positioning and alignment before fully securing. Attach the aluminum step bars to the fitted brackets, ensuring the step surface faces upward and is level along the vehicle's length. Torque all fasteners to the manufacturer's specified values — do not over-tighten, particularly on aluminum-threaded interfaces. Test each step under load before driving — apply firm downward pressure to confirm there is no flex, movement, or instability. Inspect mounting points after the first 100 miles of use and re-torque if necessary. ⚠ Note: Professional installation is strongly recommended if you are not familiar with working beneath a raised vehicle. Incorrect fitment may affect step integrity and could cause damage to chassis mounting points. Always use appropriate vehicle support equipment — never work under a vehicle supported only by a jack. Complete Your Defender's Exterior Browse the full range of exterior accessories developed for the Defender L663 110 — from protective styling upgrades to functional off-road hardware, curated for owners who expect more from their vehicle. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for the purpose of fitment identification. Product colour and finish may vary slightly from images shown due to screen calibration and photography conditions. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Pillar B Handle Grab Frame Cover Trim — ABS Matte & Carbon Fiber Finish (2020–2021) A precision-formed B-pillar grab handle frame trim that elevates the Defender 110's interior with a refined finish — available in ABS matte or carbon fiber, and fitted in minutes with no tools required. Defender L663 2020–2021 ABS Matte Carbon Fiber Interior Trim B-Pillar Cover 3M Adhesive ISO9001 Certified No-Drill Fit 2 Piece Set Overview The Land Rover Defender 110 L663 represents a genuine return to form — a vehicle that balances heritage ruggedness with a surprisingly considered interior. For owners who've invested in a 2020 or 2021 Defender, the details matter. The B-pillar area, home to the grab handles used every time a passenger enters or exits, is one of the most handled surfaces in the cabin — and one of the first to show its age if left in bare factory trim. This Pillar B Handle Grab Frame Cover Trim is engineered specifically for the Defender 110 (2020–2021) to dress that area with purpose. Manufactured from high-grade ABS with an ISO9001-certified production process, the trim is available in two finishes: a clean, understated matte black or a textured carbon fiber weave for those who prefer a more performance-oriented aesthetic. Both options are precisely moulded to mirror the contours of the factory grab frame — no gaps, no flex, no compromise. Installation is entirely tool-free. Each piece comes pre-backed with 3M automotive-grade adhesive tape, so the trim bonds directly and securely to the existing surface without drilling, clipping, or modification. The result is a clean, integrated look that appears factory-fitted from the moment it's applied — a small detail that makes a meaningful difference to the overall quality feel of the cabin. What's Included 🪟 B-Pillar Frame Cover Trims 2 pieces per set — one for each side of the cabin 🔲 Pre-Applied 3M Adhesive Tape Factory-applied to each trim piece — ready to fit straight from the box 📋 Fitting Guidance Application notes included to ensure correct alignment and bond strength Product Highlights Designed exclusively for the Defender 110 L663 (2020–2021) — not a generic fitment Available in ABS matte black or carbon fiber texture for personalised style Pre-applied 3M automotive adhesive tape for a clean, tool-free installation ISO9001 certified manufacturing ensures consistent quality and dimensional accuracy Precision moulded ABS construction — resistant to warping, heat, and UV fading Covers the grab handle frame area on both driver and passenger sides Seamlessly integrates with the factory interior without modification Enhances cabin appearance in a high-contact, high-visibility interior zone Lightweight trim adds style with zero impact on vehicle function or safety Simple adhesive removal process if repositioning is needed during fitting Compatibility Model Code Years Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022+ Not Compatible Land Rover Defender 110 L663 2022–2026 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Before beginning, confirm the trim profile matches your vehicle's B-pillar grab frame area by comparing against the product images provided. Thoroughly clean the grab frame surface using an isopropyl alcohol wipe or equivalent degreaser. Remove any dust, oils, or residue. Allow the surface to dry completely before proceeding. Warm the pre-applied 3M adhesive tape on each trim piece using a hairdryer on a low heat setting for 20–30 seconds. This activates the adhesive and significantly improves initial bond strength. Peel back the adhesive liner from the first trim piece. Carefully position the trim over the grab frame, starting from one end and pressing progressively along the length to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of the trim for 30–60 seconds to ensure full contact between the adhesive and the substrate. Repeat the process for the second trim piece on the opposite side. Allow a minimum of 24 hours for the adhesive to fully cure before subjecting the area to heavy use. ⚠ Important: Always compare the product images carefully against your specific vehicle configuration before purchasing. Interior trim layouts can vary between specification levels. If you have any questions about fitment, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Defender's Interior Today Shop the full range of Defender L663 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide, with a 4.9/5 star rating and a 30-day money-back guarantee on every order. Shop Defender 110 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Defender L663 · Exterior Protection Front & Rear Mud Flaps – Land Rover Defender L663 (2020–2026) Splash Guards & Mudguards Set A precision-fit, full-vehicle mud flap set engineered to shield your Defender's bodywork from road debris, stones, and heavy spray — on road and off it. Defender L663 2020–2026 VPLEP0388LR 4-Piece Set High-Grade Plastic Matte Black Direct Fit Exterior Accessory No Drilling Required Overview The Land Rover Defender L663 is built to go where other vehicles simply won't. Whether that's a muddy green lane in the Brecon Beacons, a rocky fire road in the Atlas Mountains, or simply the wet British motorway on a Tuesday morning — every journey puts your bodywork at risk from road grime, gravel, and spray thrown up by all four wheels. Protecting that investment from the start is simply good ownership. These mud flaps are precision-designed for the 2020 and later Defender L663 platform. Manufactured from high-grade durable plastic and finished in a clean matte black, the profile closely follows the Defender's angular wheel arch geometry, sitting flush against the body for a factory-integrated look rather than the afterthought appearance of universal-fit alternatives. The set covers all four corners of the vehicle, front and rear, ensuring comprehensive protection across every driving scenario. Beyond aesthetics, the practical benefit is straightforward: mud flaps significantly reduce the volume of debris that reaches your lower sills, door edges, and rear bumper. Over time, this translates directly into reduced corrosion risk and a cleaner vehicle between washes — a small addition that pays for itself many times over across the life of the vehicle. What's Included 🛡️ Front Mud Flaps × 2 Driver and passenger side — precision profiled for L663 front arches 🛡️ Rear Mud Flaps × 2 Driver and passenger side — tailored to L663 rear wheel arch geometry 🔩 Fitting Hardware Mounting fixings included for straightforward installation Product Highlights Precision-profiled fit for Defender L663 (2020 onwards) — front and rear Durable high-grade plastic construction resistant to impacts and flexing Matte black finish complements the Defender's bold exterior character Shields lower body panels, sills, and paintwork from stone chips and debris Reduces road spray thrown onto following vehicles — safer for all Maintains a factory-integrated aesthetic rather than a bolt-on afterthought Lightweight yet rigid — won't sag or deform over time UV-resistant material helps prevent fading and discolouration Complete set — 4 flaps covering all four corners of the vehicle Product code VPLEP0388LR — cross-references with OEM specification Compatibility Model Code Years Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Land Rover Defender (Classic) L316 1983–2016 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–45 Minutes  |  Tools: Basic Hand Tools Park the Defender on a level surface and ensure all four wheel arches are clean and free of debris before beginning. Identify and remove any existing lower arch liner fixings or OEM mud flap studs that may be present from the factory using a trim removal tool or flat-head screwdriver. Offer up the front mud flaps to the lower front arch on each side, aligning the mounting holes with the existing fixing points on the body or liner. Secure each front mud flap using the supplied hardware, tightening fixings finger-tight first before fully torquing to ensure correct alignment. Repeat the process for the rear mud flaps on both sides, confirming even spacing from the tyre and flush contact with the body panel above. Step back and visually inspect all four flaps for alignment and consistent gap. Make any minor positional adjustments before fully tightening. ⚠ Please Note: Fitting points may vary slightly between Defender 90, 110, and 130 body lengths. Always dry-fit and confirm alignment before final tightening. If you are unsure at any stage, we recommend installation by a qualified automotive technician. Do not overtighten fixings into plastic liners. Complete Your Defender's Exterior Browse our full range of Defender L663 exterior accessories — from side steps and body protection to bonnet deflectors and wheel arch trims — all curated for owners who hold their vehicles to the same standard they hold themselves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle make, model, and trim names are used solely for fitment reference purposes. Product code VPLEP0388LR is referenced for compatibility identification only. Colour accuracy may vary slightly between screen displays. Measurement tolerance: ±1–3cm.

Victorious Automotive · Defender L663 · Exterior Accessories 4-Piece Window Vent Visors & Rain Guards for Land Rover Defender 110 / 130 (2020–2026) L663 Keep fresh air flowing through your Defender's cabin in any weather — these precision-fitted vent visors deflect rain, reduce wind buffeting, and eliminate interior fogging without lifting a finger off the wheel. Defender L663 2020–2026 110 & 130 Wheelbase ABS Plastic Transparent Black Peel & Stick Fit 4-Piece Set Rain Guards Sun Shields Overview The Land Rover Defender L663 was designed to take on the world, and its owners expect every accessory fitted to it to match that standard. Whether you're commuting through city rain or crossing open countryside, the ability to crack a window without the cabin filling with water or buffeting wind noise is one of those small refinements that makes every journey noticeably more enjoyable. These 4-piece window vent visors are engineered specifically for the Defender 110 and 130 body variants. Manufactured from high-grade ABS plastic in a sleek transparent black finish, they integrate cleanly with the Defender's bold exterior lines — adding function without compromising form. The aerodynamic profile directs airflow upward and away from the window opening, allowing you to maintain a partially open window at any speed. Installation requires no drilling, no specialist tools, and no permanent modifications to your vehicle. The automotive-grade 3M-style adhesive tape bonds directly to the window channel trim, providing a secure, rattle-free fit that holds firm across temperature extremes. A tidy, confident addition to any Defender — for drivers who simply want more from their everyday drive. What's Included 🪟 Front Left Visor Driver-side window, pre-cut to profile 🪟 Front Right Visor Passenger-side window, pre-cut to profile 🪟 Rear Left Visor Rear door window, pre-cut to profile 🪟 Rear Right Visor Rear door window, pre-cut to profile 📋 Installation Guide Step-by-step fitting instructions included 🔧 Pre-Applied Adhesive Tape Automotive-grade adhesive, factory applied Product Highlights Precision-cut profile for the Defender 110 and 130 window channels High-grade ABS plastic — resistant to UV fade, cracking, and warping Allows ventilation while driving in rain, eliminating moisture build-up Reduces interior fogging and condensation on cold or damp days Aerodynamic shape minimises wind noise at motorway speeds Transparent black finish complements the Defender's exterior styling No drilling, no cutting — 100% non-destructive peel-and-stick installation Pre-applied automotive adhesive tape for a clean, flush fitment 100% brand new — quality inspected before despatch Compatible with both standard and long-wheelbase Defender variants Compatibility Model Variant Year Range Fitment Land Rover Defender 110 L663 — All Trims 2020–2026 Direct Fit Land Rover Defender 130 L663 — All Trims 2020–2026 Direct Fit Land Rover Defender 90 L663 — 3-Door 2020–2026 Not Compatible Land Rover Defender (Classic) Pre-2020 Models Pre-2020 Not Compatible Range Rover / Range Rover Sport All Variants All Years Not Compatible Installation Notes 🛠 DIY Friendly · Estimated Time: 30–45 Minutes · No Tools Required Thoroughly clean the window frame and channel trim where each visor will sit. Use a lint-free cloth with 50% isopropyl alcohol solution and allow to dry completely — any residue or moisture will compromise adhesion. Dry-fit each visor to confirm alignment and positioning before removing the adhesive backing. The visors are side-specific — check left and right orientation carefully before proceeding. Use a hot air gun or hair dryer on a low setting to gently warm the adhesive strip for 10–15 seconds. This activates the adhesive and significantly improves initial bond strength, especially in cold or damp conditions. Peel the adhesive backing and carefully position each visor, pressing firmly along its full length for at least 30 seconds to ensure full contact with the trim surface. Repeat for all four visors, then press each one again with firm, even pressure before leaving to cure undisturbed. Allow the adhesive to cure at ambient temperature for a minimum of 48 hours before exposing to water, high-pressure washing, or extreme weather. ⚠ Important: Do not run your vehicle through an automated car wash or use a pressure washer on the visor adhesive area for at least 48 hours post-installation. Premature water exposure is the single most common cause of fitment failure. Hand washing after the cure period is recommended for the first clean. Built for Defender Owners. Backed by Victorious. Explore our full range of exterior and interior accessories curated specifically for the Defender L663 — from window trim to protection film, every product is selected to match the Defender's standard. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious · Defender 1990 · Exterior Front Middle ABS Adventure Edition Style Grille for Land Rover Defender Aggressive Adventure Edition aesthetics with OEM fitment and premium ABS durability for 1990s Defenders. Defender 1990 ABS Material Honeycomb Design No Cutting Adventure Edition Direct Fit Overview The Land Rover Defender has always been defined by rugged simplicity and purposeful design. This Adventure Edition Style Front Middle Grille respects that heritage while injecting contemporary attitude into your 1990s Defender's front end. Whether you're a purist looking to refresh an ageing grille or seeking that modern-classic aesthetic, this piece delivers visual impact without compromise. Engineered from automotive-grade ABS plastic, this grille combines superior corrosion resistance with the structural rigidity needed for genuine off-road use. The repeating honeycomb mesh pattern isn't merely decorative—it optimises airflow into the engine bay whilst maintaining the aggressive stance that defines Adventure Edition styling. The finish arrives pre-painted, meaning no additional work required. Installation is genuinely straightforward. No cutting, no modifications, no guesswork. The grille mounts directly to your existing attachment points using standard hardware. With OEM-spec tolerances throughout, you'll notice zero panel gaps or misalignment. The detachable letter element adds versatility if you prefer a cleaner, unmarked appearance. What's Included 🎯 Front Middle Grille Adventure Edition style, pre-painted 🔤 Detachable Letter Element Remove for minimalist look ⚙️ Stainless Fasteners Corrosion-resistant hardware 📋 Installation Guide Step-by-step, no technical knowledge needed Product Highlights Automotive-grade ABS—superior toughness, rigidity, and corrosion resistance OEM fit and finish—zero modifications required, direct bolt-on installation Honeycomb mesh design—optimises engine bay airflow without obstruction Pre-painted Adventure Edition aesthetic—ready to install out of the box Detachable letter element—customise the front face to your preference No cutting or modification—fully reversible, completely stock-compatible Heavy-duty stainless fasteners—resist corrosion even in harsh environments Impact-resistant construction—proven durability in genuine off-road conditions Perfect replacement for aged or damaged factory grilles Backed by 30-day money-back guarantee and Victorious quality promise Compatibility Variant Year Range Fitment Land Rover Defender (Series / Classic) 1983–2006 Direct Fit Land Rover Defender 90 1983–2006 Direct Fit Land Rover Defender 110 1983–2006 Direct Fit Land Rover Defender 130 1983–2006 Direct Fit Defender L663 (2020+) 2020–Present Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Open bonnet and remove the existing factory grille by unbolting the 4–6 attachment points around the perimeter. Disconnect any wiring harnesses (if factory lights are integrated) and carefully lift out the old grille. Clean the mounting area with a dry cloth to remove dirt and debris. Position the new ABS grille and align mounting holes with existing attachment points. Insert stainless fasteners and tighten evenly in a cross pattern to avoid warping. Reconnect any wiring if applicable, and test fit for alignment and panel gaps. Close bonnet and inspect from multiple angles for even presentation. Note: If your original grille has integrated wiring for fog lights or daytime running lights, consult the factory loom before disconnecting. Standard fasteners (M6–M8 bolts) are typically reusable; replace only if corroded or damaged. Ready to Refresh Your Defender? Transform your 1990s Defender's front end with genuine Adventure Edition attitude. This grille combines purposeful design with premium materials—no compromise, no fuss. Shop Defender Grilles Use code 22GET20 for 20% off any 2 items. 4.9★ · 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All product names, logos, and brands referenced are the property of their respective owners. This product is designed for fitment with Land Rover vehicles but is not an OEM Land Rover product.

Victorious · Mercedes-Benz · Interior Lighting Mercedes-Benz C/GLC Class Air Vent Ambient Lighting Kit (W205 X253 2015–2018) Elevate your cabin ambience with precision-engineered LED accent lighting designed for seamless air vent integration. W205 / X253 2015–2018 Ambient Lighting LED Technology Multi-Color Easy Install Overview Your Mercedes-Benz C-Class and GLC are engineering masterpieces. The cabin design is crisp, modern, and purposeful—but like any modern luxury interior, there's room to personalise the atmosphere. This ambient lighting kit transforms your air vents into customisable accent points, adding sophistication and visual depth without compromising the original aesthetic. The kit features multi-colour LEDs housed in precision-engineered housings that integrate flush with your air vents. Each light is independently controllable, meaning you can match your mood, lighting conditions, or driving scenario. Whether you prefer a subtle warm tone for evening drives or vibrant accent lighting for night cruising, these lights adapt to your preference. Built on energy-efficient LED technology, the system draws minimal power from your vehicle's electrical architecture and is rated for thousands of hours of operation. Installation is straightforward for most users, though professional fitting is recommended to ensure optimal results and proper electrical integration. What's Included 💡 4x Air Vent LED Lights Multi-colour, brightness-adjustable 📋 Installation Guide Step-by-step instructions included 🔌 Wiring Harness Pre-assembled, vehicle-ready connectors ✓ All Hardware Brackets, clips, and fasteners included Product Highlights 16-colour RGB LED spectrum with infinite customisation options Adjustable brightness levels—dim for subtlety, amplify for drama Direct vehicle electrical integration—no external batteries or USB power required Engineered to OEM fitment standards; blends seamlessly with cabin design Energy-efficient consumption extends battery life and system longevity Durable polycarbonate housings resist UV fade and thermal stress Plug-and-play wiring eliminates complex splicing or vehicle modifications Operates independently; each light can be synced or set to unique colours Temperature-rated for -10°C to +60°C operating conditions Backed by 12-month manufacturer warranty covering all components Compatibility Model Generation Year Range Status Mercedes-Benz C-Class W205 2015–2018 Direct Fit Mercedes-Benz GLC X253 2015–2018 Direct Fit Mercedes-Benz C-Class W206 2019+ Not Compatible Mercedes-Benz GLC X254 2022+ Not Compatible Compatibility Note: This kit is engineered exclusively for 2015–2018 W205 (C-Class) and X253 (GLC) models. Verify your chassis code in your vehicle documentation before purchasing. Fitment on other model years or platforms is not guaranteed. Installation Difficulty Level: Intermediate | Time Required: 60–90 minutes Prepare your vehicle. Park on level ground, ensure the engine is off, and disconnect the negative battery terminal for safety. Remove air vent trim. Carefully prise out the dashboard air vent bezels where the lights will be installed. Use a plastic trim removal tool to avoid scratching surrounding surfaces. Install light housings. Position each LED housing into the vent cavity. Secure using the provided clips and brackets, ensuring flush, flush fitment with no gaps. Route wiring harness. Feed the pre-assembled wiring through the dashboard and behind trim panels to your chosen power source (typically fused to the vehicle's main electrical bus). Connect electrical connectors. Match the colour-coded connectors to their corresponding vehicle plugs. Ensure all connections are seated firmly and free of corrosion. Reinstall trim and test. Replace all air vent bezels, reconnect the battery, and cycle through lighting modes to confirm operation. Final checks. Verify that all four lights illuminate, respond to colour adjustments, and that no error messages appear on the instrument cluster. Safety Note: If you are uncomfortable working with vehicle electrical systems, professional installation is strongly recommended. Improper wiring can damage your vehicle's electrical architecture or void your warranty. Ready to Transform Your Cabin? Upgrade your Mercedes-Benz C/GLC interior with premium ambient lighting that combines form, function, and customisation. Engineered for precision fitment and backed by our 30-day money-back guarantee and 12-month warranty. Shop Now Use code 22GET20 for 20% off when ordering 2 or more items. 4.9/5 stars from 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS UK support: +44 203 943 9919 Victorious Automotive is an independent automotive accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes franchisee. All product names and references are for compatibility and identification purposes only. Vehicle modification may affect warranty coverage—consult your dealer before installation.

Victorious · Lexus RX · Interior Lighting LED Ambient Interior Light Strips for Lexus RX (2013–2015) Transform your Lexus RX cabin into a customizable ambient environment with RGB lighting synchronized to music and mobile control. Lexus RX 2013–2015 RGB Multi-Color Sound Responsive App Controlled Adjustable Length Overview The Lexus RX has always been about sophisticated comfort and understated elegance. These LED Ambient Interior Light Strips elevate that philosophy by giving you total control over your cabin atmosphere—from classic warm whites to dynamic, music-synchronized color sequences that respond in real time to your playlist. Unlike basic single-color strips, this system delivers genuine RGB flexibility with millions of color combinations, adjustable brightness, and multiple lighting modes. The strips are easily cut to fit your exact cabin layout, whether you're accentuating the dashboard, door panels, footwells, or under-seat areas. Control everything from your phone or let the sound-reactive mode sync automatically with your music. Installation requires only basic tools and no permanent modification to your vehicle. The adhesive backing and wireless control mean you're up and running in under an hour, and if you ever decide to remove them, there's no residue or damage to worry about. What's Included 💡 LED Light Strips Pre-cut and ready to install 📱 Mobile App Controller Bluetooth-enabled, iOS & Android 🔌 Power Adapter Cigarette lighter or hardwire option 🛠️ Installation Hardware Mounting clips, connectors, adhesive Product Highlights RGB multi-color mode with 16 million color options Sound-reactive synchronization with music and audio input Mobile app control via Bluetooth (iOS & Android) Adjustable brightness and fade speed settings Cuttable strips: customize length for any cabin layout Low-heat, energy-efficient LED technology Adhesive backing for easy, non-permanent installation Multiple lighting modes including strobe, pulse, and chase IP65 water resistance for reliability in humidity 12V DC compatible with standard vehicle electrical Compatibility Model Year Range Compatibility Lexus RX 350 2013–2015 Direct Fit Lexus RX 450h 2013–2015 Direct Fit Lexus RX 270 2013–2015 Direct Fit Lexus RX (pre-2013) 2009–2012 Not Compatible Lexus RX (post-2015) 2016+ Not Compatible Installation Notes Difficulty: Easy | Time: 45–60 minutes Disconnect the negative battery terminal to ensure electrical safety. Measure and plan your strip placement (dashboard, door trim, footwells, under-seat). Clean and dry all surface areas where adhesive will contact the cabin. Peel backing and firmly press strips into place, working in sections to avoid wrinkles. Route the power cable discretely along trim lines toward your power source. Connect to cigarette lighter outlet or hardwire to battery (refer to included wiring diagram). Download the mobile app, pair via Bluetooth, and test all lighting modes. Reconnect the battery terminal and enjoy your new ambient lighting. Important: If hardwiring to the battery, always use an inline fuse holder rated for 10A and connect through the positive terminal via a relay switch. Do not bypass safety components. Consult a professional if you're unsure about electrical connections. Upgrade Your Lexus RX Cabin Today Transform your daily commute and weekend drives with customizable ambient lighting that's as sophisticated as your Lexus RX. Control every color, sync to your music, and enjoy a premium cabin experience that rivals factory ambient systems. Got multiple accessories in mind? Use code 22GET20 for 20% off any 2 items. Shop Now 4.9★ 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Lexus or Toyota Motor Corporation. Lexus is a registered trademark of Toyota Motor Corporation. All product specifications and compatibility information are provided for reference only. Installation should only be performed by qualified professionals. Victorious Automotive assumes no liability for improper installation or use.

Automotive · BMW 7 Series · Exterior Styling Carbon Fiber Rear Spoiler for BMW 7 Series G11/G12 (2016–2018) Lightweight carbon fiber rear wing elevates your sedan's aerodynamics and aggressive stance instantly. BMW 7 Series G11/G12 2016–2018 Carbon Fiber Boot Lip Wing Performance Overview The BMW 7 Series G11/G12 commands presence on the road. This premium carbon fiber rear spoiler transforms the sedan's rear profile with a sharper, more aggressive aesthetic while maintaining the inherent elegance of the platform. Designed for 740i and 750i variants from 2016 to 2018. Crafted from genuine carbon fiber composite, this boot lip wing combines visual impact with measurable aerodynamic benefit. The lightweight construction—just 2 kg—adds negligible mass while enhancing high-speed stability and visual stance. The spoiler integrates seamlessly with the G11/G12 rear design language, creating a factory-level upgrade rather than an aftermarket bolt-on. Installation is straightforward, requiring only standard tools and basic mechanical knowledge. Pre-drilled mounting points align with existing rear panel attachment points, making this a weekend project for any enthusiast. Whether you're refining a stock 740i or amplifying an already-powerful 750i, this spoiler delivers immediate visual and functional transformation. What's Included 🏆 Carbon Fiber Spoiler Complete rear wing assembly, ready to install 📋 Installation Guide Step-by-step fitment instructions included 🔧 Hardware Kit All fasteners and brackets for secure mounting ✓ CE Certification External testing compliance verified Product Highlights Genuine carbon fiber construction for maximum durability and minimal weight Designed specifically for 2016–2018 740i and 750i G11/G12 models Improves rear-end aerodynamics and high-speed stability Factory-finish appearance seamlessly integrates with OEM design Just 2 kg—adds visual aggression without performance penalty Pre-drilled mounting points align with existing panel attachment locations Tool-friendly installation, approximately 1–2 hours for most users Scratch-resistant carbon weave protects against minor impacts CE-certified for quality and safety compliance Transforms sedan silhouette from understated luxury to performance-ready presence Compatibility Model Variant Year Range Compatibility BMW 7 Series 740i (G11) 2016–2018 Direct Fit BMW 7 Series 750i (G11) 2016–2018 Direct Fit BMW 7 Series 740i (G12) 2016–2018 Direct Fit BMW 7 Series 750i (G12) 2016–2018 Direct Fit BMW 7 Series (2019 and newer) 2019+ Not Compatible BMW 7 Series (F01/F02) 2009–2015 Not Compatible Verify your model year and generation before purchasing. This spoiler is engineered exclusively for G11/G12 chassis. Fitment on neighbouring generations is not guaranteed. Installation Notes Difficulty Level: Intermediate | Time: 1–2 Hours Park your 7 Series on a level surface and engage the parking brake. Open the boot and locate the rear panel mounting points along the inner edges. Align the spoiler with pre-drilled holes in the rear panel. Dry-fit first to confirm positioning. Apply the included bracket assembly to the rear deck using provided hardware. Secure the carbon fiber wing to the bracket with M6 bolts and lock washers, torquing to 15 Nm. Check alignment visually from both sides; adjust if necessary before final tightening. Test fit the boot to confirm proper clearance. Recheck all fasteners after 48 hours of driving. Clean the carbon fiber surface with mild soap and dry microfiber cloth; apply protective wax if desired. Note: Installation requires basic mechanical knowledge. If uncomfortable with fastening or alignment, professional fitment is recommended. Improper installation may affect boot closure or water drainage. Elevate Your 7 Series This carbon fiber rear spoiler transforms your BMW 7 Series from refined sedan to dynamic performance machine. In under two hours, you'll shift the visual balance toward aggression without compromising elegance. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or Jaguar Land Rover. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket accessory designed for compatibility; it is not an official OEM part.

Victorious · BMW · Exhaust System Stainless Steel Tail Muffler Exhaust Pipe – BMW 7 Series F01 Premium 304 stainless steel exhaust finisher that enhances your BMW's presence with a sleek, refined aesthetic. F01 (2009–2014) 304 Stainless Steel Tail Pipe Finisher Silver or Black ISO9001 Certified Overview The BMW 7 Series F01 (2009–2014) represents the pinnacle of German executive luxury. This chassis demands components that match its refinement—and this stainless steel tail muffler exhaust pipe delivers exactly that. Machined from high-quality 304 stainless steel, this finisher replaces or complements your existing exhaust outlet, adding visual depth and presence to the rear of your 7 Series. Available in brushed silver or refined black, it harmonises seamlessly with any paint finish whilst providing years of corrosion resistance. Installation is straightforward using automotive-grade adhesive tape—no drilling, no modification to existing components. It's the perfect finishing touch for those seeking understated performance aesthetics without structural change. What's Included 📦 1x Stainless Steel Tail Finisher 304 stainless, pre-finished 🔧 Automotive Adhesive Tape Double-sided, industrial strength 📋 Installation Guide Clear step-by-step instructions Product Highlights 304 stainless steel construction—corrosion and weather resistant Two finish options: polished silver or satin black Compact, lightweight design (300g only) Dimensions: 30cm L × 15cm W × 10cm H Non-invasive adhesive installation—no permanent modification ISO9001 certified manufacturing process Perfect for concours condition or subtle performance upgrades Compatible with all 7 Series F01 model years (2009–2014) Factory-quality finish and edge work Instantly elevates rear-end visual presence Compatibility Model Years Status BMW 7 Series Sedan (F01) 2009–2014 Direct Fit BMW 7 Series Long Wheelbase (F02) 2009–2014 Direct Fit BMW 760i / 760Li (F01/F02) 2009–2014 Direct Fit BMW 750i / 750Li (F01/F02) 2009–2014 Direct Fit BMW 740i / 740Li (F01/F02) 2009–2014 Direct Fit Other BMW models Any Not Compatible Note: Always verify fitment with your specific chassis code before purchase. Request images of your current exhaust outlet if uncertain. Installation Notes Difficulty: Beginner | Time: 10–15 minutes Clean the existing exhaust outlet rim thoroughly with a microfibre cloth and mild degreaser. Allow to dry completely. Peel back the adhesive tape backing on the tail finisher. Do not touch the tape with bare fingers. Align the finisher carefully with your exhaust outlet opening. This is the critical step—take your time. Press firmly and evenly across the entire surface for 30 seconds, starting from the centre outward. Allow adhesive to cure for 24 hours before washing or driving in wet conditions. For removal: gently heat the adhesive with a heat gun (low setting) and peel away slowly. Use adhesive remover for residue. Important: This finisher is cosmetic. It does not alter exhaust function, emissions, or performance. Ensure your vehicle's exhaust system is in good working order before installation. If your outlet is damaged, cracked, or corroded, repair or replace it first. Ready to Refine Your 7 Series? Small touches create lasting impressions. This stainless steel tail finisher adds visual sophistication to your F01 without compromise. Trusted by BMW enthusiasts and detailers worldwide. Shop Now Use code 22GET20 for 20% off when you buy 2 items. ✓ 30-Day Money Back ✓ 4.9/5 Stars 12,300+ Reviews ✓ Worldwide Shipping DHL, FedEx, UPS ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to BMW, BMW AG, or Bayerische Motoren Werke. All product names and trademarks remain the property of their respective owners. This product is designed for aesthetic enhancement only and does not alter vehicle emissions, performance, or warranty status. Always consult your vehicle's handbook and a qualified technician if you have concerns about fitment or installation.

BMW · G11/G12 · Exterior Trim BMW 7 Series G11/G12 304 Stainless Steel Tail Exhaust Pipe Premium polished stainless steel tail trim for the iconic BMW 7 Series sedan—corrosion-resistant, easy-install luxury detailing. BMW G11/G12 2019–2020 304 Stainless Steel Exhaust Trim Silver & Black Adhesive Install Overview The BMW 7 Series G11/G12 is the definitive expression of luxury sedan engineering—refined, commanding, and built to impress. Your attention to detail extends to every visible surface, and the rear exhaust trim is no exception. These OEM-style stainless steel tail pipes elevate the rear aesthetic with a polished, purposeful finish that matches the precision engineering BMW owners expect. Crafted from premium 304 stainless steel, these exhaust trim pieces deliver durability without compromise. The material resists salt spray, UV exposure, and daily road contaminants, ensuring your finish stays brilliant for years. Available in sophisticated Silver and contemporary Black, they complement factory styling while adding understated visual presence. Installation is straightforward using the included automotive-grade adhesive tape—no drilling, no permanent modification. A natural upgrade for owners who refuse to overlook the details. What's Included 🏷️ Tail Exhaust Pipe Single stainless steel piece, 40cm 🔧 Adhesive Tape Automotive-grade bonding tape Product Highlights 304 stainless steel resists salt, humidity, and UV damage Two finishes: polished Silver or sleek Black 40cm length designed for OEM fitment Lightweight at 500g—no load impact Easy adhesive installation—no tools required Complements factory rear styling seamlessly ISO9001 certified manufacturing Non-destructive adhesive application Precise fitment for 2019–2020 models Restores or upgrades tired trim instantly Compatibility Model Generation Years Fit Status BMW 7 Series G11/G12 2019–2020 Direct Fit BMW 7 Series G11/G12 2021+ Not Compatible BMW 7 Series F01/F02 2009–2015 Not Compatible Other BMW Models Any Any Not Compatible Installation Notes Difficulty: Easy | Time: 10–15 minutes Clean the rear bumper surface thoroughly with mild soap and water; dry completely. Remove the protective backing from the adhesive tape on the stainless steel trim piece. Align the exhaust pipe trim with the factory exhaust outlet, ensuring even spacing on both sides. Press firmly into place, starting from the center and working outward to eliminate air gaps. Allow adhesive to cure for 24 hours before exposure to water or extreme heat. Important: Ensure your vehicle VIN matches the 2019–2020 G11/G12 generation before purchase. Pre-clean the installation surface for maximum adhesion. Do not install in temperatures below 10°C. Elevate Your 7 Series Rear Styling These precision stainless steel tail pipes deliver the refined detail your BMW 7 Series deserves. Built to last, designed to impress—add them to your cart today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9★ from 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL / FedEx shipping ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessory specialist and is not affiliated with BMW, the BMW Group, or Bayerische Motoren Werke AG. All product names, logos, and trademarks are the property of their respective manufacturers. Product fitment and compatibility are provided in good faith; buyers are responsible for verifying fit with their specific vehicle.