New products

Victorious Automotive · Land Rover Discovery 3 · Engine Drive Belts PQS500221 Secondary Drive Belt – Land Rover Discovery 3, Range Rover & Range Rover Sport 4.4L V8 Petrol A precision-matched rubber auxiliary belt engineered to maintain smooth accessory drive performance on the 4.4L V8 petrol engine across the Discovery 3, Range Rover L322, and Range Rover Sport L320 platforms. PQS500221 Discovery 3 L319 Range Rover L322 Range Rover Sport L320 2002–2009 4.4L V8 Petrol Secondary Belt High-Grade Rubber OEM Reference Fit New Condition Overview The Land Rover Discovery 3, Range Rover L322, and Range Rover Sport L320 are three of the most capable and well-regarded platforms Land Rover ever produced. Sharing the 4.4-litre Jaguar-derived V8 petrol engine, all three vehicles rely on a carefully engineered accessory drive system to keep ancillaries — including the power steering pump, air conditioning compressor, and alternator — running in harmony. Over time, the secondary drive belt is subject to heat cycling, stretch, and surface degradation, and a worn or cracked belt should be addressed without delay. Part number PQS500221 is the direct-fit secondary auxiliary belt for all three of these platforms when equipped with the 4.4L V8 petrol engine. Manufactured from high-heat-resistant rubber to match the original specification, this belt is dimensionally identical to the factory fitment — ensuring correct pulley engagement, proper tension retention, and confident operation across the full operating temperature range of these engines. Whether you're carrying out a scheduled service interval, addressing a squealing auxiliary belt, or proactively refreshing wear items ahead of a long journey, this is the correct replacement part. Bandwidth of 12cm and a belt height of 3cm ensure an exact match to the pulley geometry of the 4.4L V8 accessory drive system. What's Included 🔧 Secondary Drive Belt PQS500221 — 1x new belt, ready to fit 📋 Part Reference Card OEM part number cross-reference included 🏷️ RALUX Brand Packaging Securely packaged to prevent pre-install damage Product Highlights Direct replacement for OEM part number PQS500221 Engineered for the 4.4L V8 petrol engine accessory drive High-heat-resistant rubber construction for durability 12cm bandwidth — matches factory pulley dimensions exactly 3cm belt height for correct groove engagement and tracking Fits Discovery 3 L319, Range Rover L322 and Sport L320 New old stock condition — never fitted, never pre-tensioned Suitable for Secondary / auxiliary pulley position Compatible with petrol V8 variants only (not diesel) Supplied by RALUX — specialist automotive belt manufacturer Vehicle Compatibility Vehicle Code Years Engine Fitment Land Rover Discovery 3 L319 2005–2009 4.4L V8 Petrol Direct Fit Range Rover Vogue L322 2002–2009 4.4L V8 Petrol Direct Fit Range Rover Sport L320 2005–2009 4.4L V8 Petrol Direct Fit Discovery 3 / 4 L319 / L319 All years 2.7L TDV6 Diesel Not Compatible Range Rover Sport L320 2005–2009 2.7L TDV6 Diesel Not Compatible Range Rover Sport L494 2013–2020 All Engines Not Compatible Range Rover Vogue L405 2013–2020 All Engines Not Compatible Installation Notes 🔧 Difficulty: Moderate  |  ⏱ Estimated Time: 45–90 Minutes  |  🛠 Tools Required: Yes Ensure the engine is fully cold and the ignition is off before beginning. Disconnect the negative battery terminal for safety. Locate the secondary belt tensioner pulley on the 4.4L V8 engine. Using the appropriate socket or breaker bar, rotate the tensioner to relieve belt tension. Carefully slide the old secondary belt off the accessory pulleys, noting the routing path for reference. Photograph the routing before removal if unfamiliar. Inspect all idler pulleys, the tensioner pulley, and the main drive pulleys for wear, wobble, or damage. Replace any compromised components before fitting the new belt. Route the new PQS500221 belt over the pulleys following the original routing path. Ensure correct seating in all grooves before releasing tension. Slowly release the tensioner to apply load to the new belt. Verify the belt is tracking centrally on all pulleys with no edge overhang. Reconnect the battery, start the engine, and check for any squealing, misalignment, or unusual noise at idle and under light accessory load. ⚠ Important: This belt is for the secondary/auxiliary drive position only — do not confuse with the primary serpentine belt. Always verify your engine variant is the 4.4L V8 petrol before ordering. If your vehicle is diesel-engined, this part does not apply. When in doubt, consult your vehicle's workshop manual or contact our team on +44 203 943 9919. Browse More for Your Vehicle 🚙 Discovery 3 Collection All parts & accessories for L319 🏔️ Range Rover Sport L320 Parts & upgrades for 2005–2013 🔩 Discovery 4 Collection Explore parts for the L319 successor Genuine Care for Your Land Rover At Victorious Automotive, we stock the parts that matter — the ones that keep your Land Rover running the way it was built to. Every order ships worldwide via DHL, FedEx, UPS, or TNT, and is backed by our 30-day money-back guarantee. Shop Discovery 3 Parts → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All manufacturer names, part numbers, and vehicle references are used solely for identification and compatibility purposes. PQS500221 is an aftermarket replacement part supplied by RALUX. Always verify fitment against your vehicle identification number (VIN) and engine code before purchase.

Victorious Automotive · Defender L663 · Exterior Accessories Foldable Liftable Stainless Steel Roof Ladder – Land Rover Defender L663 (2020–2026) A precision-engineered, corrosion-resistant roof ladder purpose-built for the Defender L663 — making roof rack access effortless without compromising the vehicle's commanding exterior. Defender L663 2020–2026 Stainless Steel Foldable Design Quick-Release CE Certified Rustproof Left Placement Exterior Upgrade Overview The Land Rover Defender L663 was reborn as a vehicle that blends authentic off-road capability with a modern, purposeful design language. Whether you're loading gear onto a rooftop tent platform, accessing a roof rack, or navigating demanding terrain with expedition-grade kit, seamless roof access is not just convenient — it's essential. The Defender's high roofline demands a solution that's both robust and thoughtfully integrated. This Foldable Liftable Stainless Steel Roof Ladder is designed exclusively for the 2020–2026 Defender L663. Fabricated from premium-grade stainless steel, it offers a direct-fit installation on the left-hand side of the vehicle, aligning cleanly with the Defender's body profile. The foldable and liftable mechanism means the ladder tucks away when not in use, preserving both aesthetics and departure clearance on the trail. The quick-release system ensures the ladder can be deployed and stowed without tools, making it an ideal companion for real-world adventure use. CE certified and built to resist corrosion across all climates — from coastal salt spray to alpine snow — this is a ladder that earns its place on a working Defender. What's Included 🪜 Roof Ladder Kit Full stainless steel ladder assembly with all mounting hardware included 🔩 Mounting Hardware All necessary fixings, brackets, and fasteners for secure installation 📋 Installation Guide Step-by-step fitting instructions for straightforward installation Product Highlights Premium stainless steel construction for exceptional strength and long-term durability Foldable and liftable design allows compact storage when not in active use Quick-release mechanism enables tool-free deployment and stowing in seconds Rustproof and fully corrosion-resistant across all weather environments Direct-fit engineering specific to the Defender L663 (2020–2026) body structure CE certified — meets European safety and quality standards Left-side placement aligns naturally with driver-side roof access workflow Rigid and stable underload, providing confident footing at height Clean integration that complements the Defender's utilitarian exterior aesthetic Suitable for expedition, overlanding, and everyday practical use Compatibility Vehicle Code Year Range Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Defender 90/110 (Classic) L316 1983–2016 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes 🔧 Difficulty: Moderate  ·  ⏱ Estimated Time: 45–90 Minutes  ·  👤 1–2 People Recommended Lay out all components from the kit and verify all hardware is present before beginning installation. Park the Defender on a level surface and ensure the vehicle is stationary and secure throughout the process. Identify the left-side mounting points on the Defender L663 body — refer to the included installation guide for precise locations. Position the ladder assembly against the vehicle and align the mounting brackets with the designated fixing points. Secure the brackets using the supplied hardware, tightening to the torque specification noted in the guide. Do not overtighten. Test the fold-and-lift mechanism through several cycles to confirm smooth, unobstructed operation. Engage the quick-release function to verify secure locking in both the deployed and stowed positions. Conduct a final visual inspection of all fixings and confirm no components are loose before use. ⚠ Important: Professional installation is recommended if you are unfamiliar with vehicle bodywork fixings. Always verify your specific Defender variant (90, 110, or 130) is compatible before fitting. Do not exceed the rated load capacity of the ladder. Periodically inspect all fixings after off-road use. Built for Defenders That Actually Work At Victorious Automotive, we stock accessories chosen for real-world performance — not just aesthetics. This roof ladder is exactly the kind of purposeful addition your L663 deserves. Explore our full Defender exterior range or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for fitment advice. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Defender L663 · Exterior Protection Front & Rear Mud Flaps – Land Rover Defender L663 (2020–2026) Splash Guards & Mudguards Set A precision-fit, full-vehicle mud flap set engineered to shield your Defender's bodywork from road debris, stones, and heavy spray — on road and off it. Defender L663 2020–2026 VPLEP0388LR 4-Piece Set High-Grade Plastic Matte Black Direct Fit Exterior Accessory No Drilling Required Overview The Land Rover Defender L663 is built to go where other vehicles simply won't. Whether that's a muddy green lane in the Brecon Beacons, a rocky fire road in the Atlas Mountains, or simply the wet British motorway on a Tuesday morning — every journey puts your bodywork at risk from road grime, gravel, and spray thrown up by all four wheels. Protecting that investment from the start is simply good ownership. These mud flaps are precision-designed for the 2020 and later Defender L663 platform. Manufactured from high-grade durable plastic and finished in a clean matte black, the profile closely follows the Defender's angular wheel arch geometry, sitting flush against the body for a factory-integrated look rather than the afterthought appearance of universal-fit alternatives. The set covers all four corners of the vehicle, front and rear, ensuring comprehensive protection across every driving scenario. Beyond aesthetics, the practical benefit is straightforward: mud flaps significantly reduce the volume of debris that reaches your lower sills, door edges, and rear bumper. Over time, this translates directly into reduced corrosion risk and a cleaner vehicle between washes — a small addition that pays for itself many times over across the life of the vehicle. What's Included 🛡️ Front Mud Flaps × 2 Driver and passenger side — precision profiled for L663 front arches 🛡️ Rear Mud Flaps × 2 Driver and passenger side — tailored to L663 rear wheel arch geometry 🔩 Fitting Hardware Mounting fixings included for straightforward installation Product Highlights Precision-profiled fit for Defender L663 (2020 onwards) — front and rear Durable high-grade plastic construction resistant to impacts and flexing Matte black finish complements the Defender's bold exterior character Shields lower body panels, sills, and paintwork from stone chips and debris Reduces road spray thrown onto following vehicles — safer for all Maintains a factory-integrated aesthetic rather than a bolt-on afterthought Lightweight yet rigid — won't sag or deform over time UV-resistant material helps prevent fading and discolouration Complete set — 4 flaps covering all four corners of the vehicle Product code VPLEP0388LR — cross-references with OEM specification Compatibility Model Code Years Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Land Rover Defender (Classic) L316 1983–2016 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–45 Minutes  |  Tools: Basic Hand Tools Park the Defender on a level surface and ensure all four wheel arches are clean and free of debris before beginning. Identify and remove any existing lower arch liner fixings or OEM mud flap studs that may be present from the factory using a trim removal tool or flat-head screwdriver. Offer up the front mud flaps to the lower front arch on each side, aligning the mounting holes with the existing fixing points on the body or liner. Secure each front mud flap using the supplied hardware, tightening fixings finger-tight first before fully torquing to ensure correct alignment. Repeat the process for the rear mud flaps on both sides, confirming even spacing from the tyre and flush contact with the body panel above. Step back and visually inspect all four flaps for alignment and consistent gap. Make any minor positional adjustments before fully tightening. ⚠ Please Note: Fitting points may vary slightly between Defender 90, 110, and 130 body lengths. Always dry-fit and confirm alignment before final tightening. If you are unsure at any stage, we recommend installation by a qualified automotive technician. Do not overtighten fixings into plastic liners. Complete Your Defender's Exterior Browse our full range of Defender L663 exterior accessories — from side steps and body protection to bonnet deflectors and wheel arch trims — all curated for owners who hold their vehicles to the same standard they hold themselves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle make, model, and trim names are used solely for fitment reference purposes. Product code VPLEP0388LR is referenced for compatibility identification only. Colour accuracy may vary slightly between screen displays. Measurement tolerance: ±1–3cm.

Victorious Automotive · Defender L663 · Underbody Protection Front Undershield Guard for Land Rover Defender L663 (2020–2026) — 5mm Anodised Aluminium Heavy-duty aluminium undershield protection for the Defender's lower bumper and radiator — engineered for serious off-road use without compromising recovery access. Defender L663 2020–2026 5mm Anodised Aluminium 90 & 110 Off-Road Protection Radiator Guard Recovery Loop Access Direct Fit Overview The Land Rover Defender L663 was purpose-built to handle terrain that most vehicles wouldn't dare attempt — but even with its go-anywhere credentials, the underside of the front bumper and radiator area remain exposed to rocks, trail debris, and grounding impacts the moment serious off-road work begins. It's a vulnerability that any genuine off-road driver will encounter quickly, and one that demands a proper solution rather than an afterthought. This Front Undershield Guard is precision-designed to fit the Defender 90 and Defender 110 (L663, 2020 onwards), constructed from 5mm anodised aluminium — a material that offers an exceptional strength-to-weight ratio, high corrosion resistance, and the rigidity needed to deflect rock strikes and debris without adding unnecessary bulk. The anodised finish ensures long-term durability even when exposed to mud, water, and the elements repeatedly. What sets this guard apart from generic alternatives is the reinforced mounting assembly, which distributes impact loads properly across the vehicle's structure rather than concentrating stress at a single point. Crucially, access to the front recovery loop is maintained at all times — so if you do get grounded, extraction remains straightforward without the need to remove any components in the field. This is the kind of thoughtful engineering that Defender owners expect from their accessories. What's Included 🛡️ Front Undershield Guard 5mm anodised aluminium, pre-formed for direct fitment 🔩 Installation Hardware Kit All mounting bolts, brackets and fixings included 📄 Fitment Guide Step-by-step installation reference included Product Highlights 5mm anodised aluminium construction for maximum strength and corrosion resistance Designed specifically for Defender 90 and 110 L663 (2020 onwards) — direct OEM-style fit Protects the lower front bumper area and radiator from rock strikes and trail debris Reinforced mounting assembly distributes impact loads across the vehicle structure Recovery loop remains fully accessible — no field removal required during recovery Anodised finish resists mud, moisture, and prolonged off-road exposure Lightweight profile adds meaningful protection without significant weight penalty All installation hardware included — no additional parts needed for fitment Maintains factory undertray fitment lines for a clean, integrated appearance Suited for green laning, trail driving, expedition use and demanding off-road environments Compatibility Vehicle Model Code Year Range Body Style Fitment Land Rover Defender 90 L663 2020–2026 3-Door Direct Fit Land Rover Defender 110 L663 2020–2026 5-Door Direct Fit Land Rover Defender 130 L663 2022–2026 Extended Verify Before Purchase Land Rover Defender (Classic) L316 Pre-2016 All Not Compatible Range Rover Sport L494 / L461 All Years All Not Compatible Range Rover Vogue L405 / L460 All Years All Not Compatible Installation Notes 🔧 Difficulty: Beginner–Intermediate  |  ⏱ Estimated Time: 45–90 Minutes  |  👤 1–2 People Recommended Ensure the vehicle is parked on level ground, engine off and cooled. Engage the parking brake and use axle stands if working beneath the front end. Remove any existing undertray panels or fasteners in the lower front bumper area as required to gain clear access to the mounting points. Offer up the undershield guard to the mounting positions and confirm alignment with the vehicle's existing apertures before tightening any fixings. Attach the reinforced mounting assembly using the supplied hardware, starting with the outer mounting points to seat the guard correctly before securing centre fixings. Torque all bolts to the manufacturer's recommended specification — do not overtighten aluminium mounting points. Confirm that the front recovery loop is visible and unobstructed, and that the guard sits flush with no contact against cooling components or wiring. Conduct a short low-speed test drive and re-check all fixings for security before undertaking off-road use. ⚠ Important: Verify fitment compatibility with your specific Defender model and build year before installation. If your vehicle is fitted with optional front underbody styling packs or aftermarket bumpers, fitment may vary. When in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before proceeding. Built for Defenders That Actually Get Used At Victorious Automotive, every accessory we carry is selected with one question in mind: would we fit it to our own vehicle? This undershield guard answers that with confidence. Explore our full range of Defender L663 protection and exterior accessories below. Shop All Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are used solely for fitment reference purposes.

Victorious Automotive · Defender L663 · Exterior Accessories 4-Piece Window Vent Visors & Rain Guards for Land Rover Defender 110 / 130 (2020–2026) L663 Keep fresh air flowing through your Defender's cabin in any weather — these precision-fitted vent visors deflect rain, reduce wind buffeting, and eliminate interior fogging without lifting a finger off the wheel. Defender L663 2020–2026 110 & 130 Wheelbase ABS Plastic Transparent Black Peel & Stick Fit 4-Piece Set Rain Guards Sun Shields Overview The Land Rover Defender L663 was designed to take on the world, and its owners expect every accessory fitted to it to match that standard. Whether you're commuting through city rain or crossing open countryside, the ability to crack a window without the cabin filling with water or buffeting wind noise is one of those small refinements that makes every journey noticeably more enjoyable. These 4-piece window vent visors are engineered specifically for the Defender 110 and 130 body variants. Manufactured from high-grade ABS plastic in a sleek transparent black finish, they integrate cleanly with the Defender's bold exterior lines — adding function without compromising form. The aerodynamic profile directs airflow upward and away from the window opening, allowing you to maintain a partially open window at any speed. Installation requires no drilling, no specialist tools, and no permanent modifications to your vehicle. The automotive-grade 3M-style adhesive tape bonds directly to the window channel trim, providing a secure, rattle-free fit that holds firm across temperature extremes. A tidy, confident addition to any Defender — for drivers who simply want more from their everyday drive. What's Included 🪟 Front Left Visor Driver-side window, pre-cut to profile 🪟 Front Right Visor Passenger-side window, pre-cut to profile 🪟 Rear Left Visor Rear door window, pre-cut to profile 🪟 Rear Right Visor Rear door window, pre-cut to profile 📋 Installation Guide Step-by-step fitting instructions included 🔧 Pre-Applied Adhesive Tape Automotive-grade adhesive, factory applied Product Highlights Precision-cut profile for the Defender 110 and 130 window channels High-grade ABS plastic — resistant to UV fade, cracking, and warping Allows ventilation while driving in rain, eliminating moisture build-up Reduces interior fogging and condensation on cold or damp days Aerodynamic shape minimises wind noise at motorway speeds Transparent black finish complements the Defender's exterior styling No drilling, no cutting — 100% non-destructive peel-and-stick installation Pre-applied automotive adhesive tape for a clean, flush fitment 100% brand new — quality inspected before despatch Compatible with both standard and long-wheelbase Defender variants Compatibility Model Variant Year Range Fitment Land Rover Defender 110 L663 — All Trims 2020–2026 Direct Fit Land Rover Defender 130 L663 — All Trims 2020–2026 Direct Fit Land Rover Defender 90 L663 — 3-Door 2020–2026 Not Compatible Land Rover Defender (Classic) Pre-2020 Models Pre-2020 Not Compatible Range Rover / Range Rover Sport All Variants All Years Not Compatible Installation Notes 🛠 DIY Friendly · Estimated Time: 30–45 Minutes · No Tools Required Thoroughly clean the window frame and channel trim where each visor will sit. Use a lint-free cloth with 50% isopropyl alcohol solution and allow to dry completely — any residue or moisture will compromise adhesion. Dry-fit each visor to confirm alignment and positioning before removing the adhesive backing. The visors are side-specific — check left and right orientation carefully before proceeding. Use a hot air gun or hair dryer on a low setting to gently warm the adhesive strip for 10–15 seconds. This activates the adhesive and significantly improves initial bond strength, especially in cold or damp conditions. Peel the adhesive backing and carefully position each visor, pressing firmly along its full length for at least 30 seconds to ensure full contact with the trim surface. Repeat for all four visors, then press each one again with firm, even pressure before leaving to cure undisturbed. Allow the adhesive to cure at ambient temperature for a minimum of 48 hours before exposing to water, high-pressure washing, or extreme weather. ⚠ Important: Do not run your vehicle through an automated car wash or use a pressure washer on the visor adhesive area for at least 48 hours post-installation. Premature water exposure is the single most common cause of fitment failure. Hand washing after the cure period is recommended for the first clean. Built for Defender Owners. Backed by Victorious. Explore our full range of exterior and interior accessories curated specifically for the Defender L663 — from window trim to protection film, every product is selected to match the Defender's standard. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious · Defender 1990 · Exterior Front Middle ABS Adventure Edition Style Grille for Land Rover Defender Aggressive Adventure Edition aesthetics with OEM fitment and premium ABS durability for 1990s Defenders. Defender 1990 ABS Material Honeycomb Design No Cutting Adventure Edition Direct Fit Overview The Land Rover Defender has always been defined by rugged simplicity and purposeful design. This Adventure Edition Style Front Middle Grille respects that heritage while injecting contemporary attitude into your 1990s Defender's front end. Whether you're a purist looking to refresh an ageing grille or seeking that modern-classic aesthetic, this piece delivers visual impact without compromise. Engineered from automotive-grade ABS plastic, this grille combines superior corrosion resistance with the structural rigidity needed for genuine off-road use. The repeating honeycomb mesh pattern isn't merely decorative—it optimises airflow into the engine bay whilst maintaining the aggressive stance that defines Adventure Edition styling. The finish arrives pre-painted, meaning no additional work required. Installation is genuinely straightforward. No cutting, no modifications, no guesswork. The grille mounts directly to your existing attachment points using standard hardware. With OEM-spec tolerances throughout, you'll notice zero panel gaps or misalignment. The detachable letter element adds versatility if you prefer a cleaner, unmarked appearance. What's Included 🎯 Front Middle Grille Adventure Edition style, pre-painted 🔤 Detachable Letter Element Remove for minimalist look ⚙️ Stainless Fasteners Corrosion-resistant hardware 📋 Installation Guide Step-by-step, no technical knowledge needed Product Highlights Automotive-grade ABS—superior toughness, rigidity, and corrosion resistance OEM fit and finish—zero modifications required, direct bolt-on installation Honeycomb mesh design—optimises engine bay airflow without obstruction Pre-painted Adventure Edition aesthetic—ready to install out of the box Detachable letter element—customise the front face to your preference No cutting or modification—fully reversible, completely stock-compatible Heavy-duty stainless fasteners—resist corrosion even in harsh environments Impact-resistant construction—proven durability in genuine off-road conditions Perfect replacement for aged or damaged factory grilles Backed by 30-day money-back guarantee and Victorious quality promise Compatibility Variant Year Range Fitment Land Rover Defender (Series / Classic) 1983–2006 Direct Fit Land Rover Defender 90 1983–2006 Direct Fit Land Rover Defender 110 1983–2006 Direct Fit Land Rover Defender 130 1983–2006 Direct Fit Defender L663 (2020+) 2020–Present Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Open bonnet and remove the existing factory grille by unbolting the 4–6 attachment points around the perimeter. Disconnect any wiring harnesses (if factory lights are integrated) and carefully lift out the old grille. Clean the mounting area with a dry cloth to remove dirt and debris. Position the new ABS grille and align mounting holes with existing attachment points. Insert stainless fasteners and tighten evenly in a cross pattern to avoid warping. Reconnect any wiring if applicable, and test fit for alignment and panel gaps. Close bonnet and inspect from multiple angles for even presentation. Note: If your original grille has integrated wiring for fog lights or daytime running lights, consult the factory loom before disconnecting. Standard fasteners (M6–M8 bolts) are typically reusable; replace only if corroded or damaged. Ready to Refresh Your Defender? Transform your 1990s Defender's front end with genuine Adventure Edition attitude. This grille combines purposeful design with premium materials—no compromise, no fuss. Shop Defender Grilles Use code 22GET20 for 20% off any 2 items. 4.9★ · 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All product names, logos, and brands referenced are the property of their respective owners. This product is designed for fitment with Land Rover vehicles but is not an OEM Land Rover product.

Victorious · Mercedes-Benz · Interior Lighting Mercedes-Benz C/GLC Class Air Vent Ambient Lighting Kit (W205 X253 2015–2018) Elevate your cabin ambience with precision-engineered LED accent lighting designed for seamless air vent integration. W205 / X253 2015–2018 Ambient Lighting LED Technology Multi-Color Easy Install Overview Your Mercedes-Benz C-Class and GLC are engineering masterpieces. The cabin design is crisp, modern, and purposeful—but like any modern luxury interior, there's room to personalise the atmosphere. This ambient lighting kit transforms your air vents into customisable accent points, adding sophistication and visual depth without compromising the original aesthetic. The kit features multi-colour LEDs housed in precision-engineered housings that integrate flush with your air vents. Each light is independently controllable, meaning you can match your mood, lighting conditions, or driving scenario. Whether you prefer a subtle warm tone for evening drives or vibrant accent lighting for night cruising, these lights adapt to your preference. Built on energy-efficient LED technology, the system draws minimal power from your vehicle's electrical architecture and is rated for thousands of hours of operation. Installation is straightforward for most users, though professional fitting is recommended to ensure optimal results and proper electrical integration. What's Included 💡 4x Air Vent LED Lights Multi-colour, brightness-adjustable 📋 Installation Guide Step-by-step instructions included 🔌 Wiring Harness Pre-assembled, vehicle-ready connectors ✓ All Hardware Brackets, clips, and fasteners included Product Highlights 16-colour RGB LED spectrum with infinite customisation options Adjustable brightness levels—dim for subtlety, amplify for drama Direct vehicle electrical integration—no external batteries or USB power required Engineered to OEM fitment standards; blends seamlessly with cabin design Energy-efficient consumption extends battery life and system longevity Durable polycarbonate housings resist UV fade and thermal stress Plug-and-play wiring eliminates complex splicing or vehicle modifications Operates independently; each light can be synced or set to unique colours Temperature-rated for -10°C to +60°C operating conditions Backed by 12-month manufacturer warranty covering all components Compatibility Model Generation Year Range Status Mercedes-Benz C-Class W205 2015–2018 Direct Fit Mercedes-Benz GLC X253 2015–2018 Direct Fit Mercedes-Benz C-Class W206 2019+ Not Compatible Mercedes-Benz GLC X254 2022+ Not Compatible Compatibility Note: This kit is engineered exclusively for 2015–2018 W205 (C-Class) and X253 (GLC) models. Verify your chassis code in your vehicle documentation before purchasing. Fitment on other model years or platforms is not guaranteed. Installation Difficulty Level: Intermediate | Time Required: 60–90 minutes Prepare your vehicle. Park on level ground, ensure the engine is off, and disconnect the negative battery terminal for safety. Remove air vent trim. Carefully prise out the dashboard air vent bezels where the lights will be installed. Use a plastic trim removal tool to avoid scratching surrounding surfaces. Install light housings. Position each LED housing into the vent cavity. Secure using the provided clips and brackets, ensuring flush, flush fitment with no gaps. Route wiring harness. Feed the pre-assembled wiring through the dashboard and behind trim panels to your chosen power source (typically fused to the vehicle's main electrical bus). Connect electrical connectors. Match the colour-coded connectors to their corresponding vehicle plugs. Ensure all connections are seated firmly and free of corrosion. Reinstall trim and test. Replace all air vent bezels, reconnect the battery, and cycle through lighting modes to confirm operation. Final checks. Verify that all four lights illuminate, respond to colour adjustments, and that no error messages appear on the instrument cluster. Safety Note: If you are uncomfortable working with vehicle electrical systems, professional installation is strongly recommended. Improper wiring can damage your vehicle's electrical architecture or void your warranty. Ready to Transform Your Cabin? Upgrade your Mercedes-Benz C/GLC interior with premium ambient lighting that combines form, function, and customisation. Engineered for precision fitment and backed by our 30-day money-back guarantee and 12-month warranty. Shop Now Use code 22GET20 for 20% off when ordering 2 or more items. 4.9/5 stars from 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS UK support: +44 203 943 9919 Victorious Automotive is an independent automotive accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes franchisee. All product names and references are for compatibility and identification purposes only. Vehicle modification may affect warranty coverage—consult your dealer before installation.

Victorious · Lexus RX · Interior Lighting LED Ambient Interior Light Strips for Lexus RX (2013–2015) Transform your Lexus RX cabin into a customizable ambient environment with RGB lighting synchronized to music and mobile control. Lexus RX 2013–2015 RGB Multi-Color Sound Responsive App Controlled Adjustable Length Overview The Lexus RX has always been about sophisticated comfort and understated elegance. These LED Ambient Interior Light Strips elevate that philosophy by giving you total control over your cabin atmosphere—from classic warm whites to dynamic, music-synchronized color sequences that respond in real time to your playlist. Unlike basic single-color strips, this system delivers genuine RGB flexibility with millions of color combinations, adjustable brightness, and multiple lighting modes. The strips are easily cut to fit your exact cabin layout, whether you're accentuating the dashboard, door panels, footwells, or under-seat areas. Control everything from your phone or let the sound-reactive mode sync automatically with your music. Installation requires only basic tools and no permanent modification to your vehicle. The adhesive backing and wireless control mean you're up and running in under an hour, and if you ever decide to remove them, there's no residue or damage to worry about. What's Included 💡 LED Light Strips Pre-cut and ready to install 📱 Mobile App Controller Bluetooth-enabled, iOS & Android 🔌 Power Adapter Cigarette lighter or hardwire option 🛠️ Installation Hardware Mounting clips, connectors, adhesive Product Highlights RGB multi-color mode with 16 million color options Sound-reactive synchronization with music and audio input Mobile app control via Bluetooth (iOS & Android) Adjustable brightness and fade speed settings Cuttable strips: customize length for any cabin layout Low-heat, energy-efficient LED technology Adhesive backing for easy, non-permanent installation Multiple lighting modes including strobe, pulse, and chase IP65 water resistance for reliability in humidity 12V DC compatible with standard vehicle electrical Compatibility Model Year Range Compatibility Lexus RX 350 2013–2015 Direct Fit Lexus RX 450h 2013–2015 Direct Fit Lexus RX 270 2013–2015 Direct Fit Lexus RX (pre-2013) 2009–2012 Not Compatible Lexus RX (post-2015) 2016+ Not Compatible Installation Notes Difficulty: Easy | Time: 45–60 minutes Disconnect the negative battery terminal to ensure electrical safety. Measure and plan your strip placement (dashboard, door trim, footwells, under-seat). Clean and dry all surface areas where adhesive will contact the cabin. Peel backing and firmly press strips into place, working in sections to avoid wrinkles. Route the power cable discretely along trim lines toward your power source. Connect to cigarette lighter outlet or hardwire to battery (refer to included wiring diagram). Download the mobile app, pair via Bluetooth, and test all lighting modes. Reconnect the battery terminal and enjoy your new ambient lighting. Important: If hardwiring to the battery, always use an inline fuse holder rated for 10A and connect through the positive terminal via a relay switch. Do not bypass safety components. Consult a professional if you're unsure about electrical connections. Upgrade Your Lexus RX Cabin Today Transform your daily commute and weekend drives with customizable ambient lighting that's as sophisticated as your Lexus RX. Control every color, sync to your music, and enjoy a premium cabin experience that rivals factory ambient systems. Got multiple accessories in mind? Use code 22GET20 for 20% off any 2 items. Shop Now 4.9★ 12,300+ Reviews ✓ 30-Day Money Back ✓ Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Lexus or Toyota Motor Corporation. Lexus is a registered trademark of Toyota Motor Corporation. All product specifications and compatibility information are provided for reference only. Installation should only be performed by qualified professionals. Victorious Automotive assumes no liability for improper installation or use.

Automotive · BMW 7 Series · Exterior Styling Carbon Fiber Rear Spoiler for BMW 7 Series G11/G12 (2016–2018) Lightweight carbon fiber rear wing elevates your sedan's aerodynamics and aggressive stance instantly. BMW 7 Series G11/G12 2016–2018 Carbon Fiber Boot Lip Wing Performance Overview The BMW 7 Series G11/G12 commands presence on the road. This premium carbon fiber rear spoiler transforms the sedan's rear profile with a sharper, more aggressive aesthetic while maintaining the inherent elegance of the platform. Designed for 740i and 750i variants from 2016 to 2018. Crafted from genuine carbon fiber composite, this boot lip wing combines visual impact with measurable aerodynamic benefit. The lightweight construction—just 2 kg—adds negligible mass while enhancing high-speed stability and visual stance. The spoiler integrates seamlessly with the G11/G12 rear design language, creating a factory-level upgrade rather than an aftermarket bolt-on. Installation is straightforward, requiring only standard tools and basic mechanical knowledge. Pre-drilled mounting points align with existing rear panel attachment points, making this a weekend project for any enthusiast. Whether you're refining a stock 740i or amplifying an already-powerful 750i, this spoiler delivers immediate visual and functional transformation. What's Included 🏆 Carbon Fiber Spoiler Complete rear wing assembly, ready to install 📋 Installation Guide Step-by-step fitment instructions included 🔧 Hardware Kit All fasteners and brackets for secure mounting ✓ CE Certification External testing compliance verified Product Highlights Genuine carbon fiber construction for maximum durability and minimal weight Designed specifically for 2016–2018 740i and 750i G11/G12 models Improves rear-end aerodynamics and high-speed stability Factory-finish appearance seamlessly integrates with OEM design Just 2 kg—adds visual aggression without performance penalty Pre-drilled mounting points align with existing panel attachment locations Tool-friendly installation, approximately 1–2 hours for most users Scratch-resistant carbon weave protects against minor impacts CE-certified for quality and safety compliance Transforms sedan silhouette from understated luxury to performance-ready presence Compatibility Model Variant Year Range Compatibility BMW 7 Series 740i (G11) 2016–2018 Direct Fit BMW 7 Series 750i (G11) 2016–2018 Direct Fit BMW 7 Series 740i (G12) 2016–2018 Direct Fit BMW 7 Series 750i (G12) 2016–2018 Direct Fit BMW 7 Series (2019 and newer) 2019+ Not Compatible BMW 7 Series (F01/F02) 2009–2015 Not Compatible Verify your model year and generation before purchasing. This spoiler is engineered exclusively for G11/G12 chassis. Fitment on neighbouring generations is not guaranteed. Installation Notes Difficulty Level: Intermediate | Time: 1–2 Hours Park your 7 Series on a level surface and engage the parking brake. Open the boot and locate the rear panel mounting points along the inner edges. Align the spoiler with pre-drilled holes in the rear panel. Dry-fit first to confirm positioning. Apply the included bracket assembly to the rear deck using provided hardware. Secure the carbon fiber wing to the bracket with M6 bolts and lock washers, torquing to 15 Nm. Check alignment visually from both sides; adjust if necessary before final tightening. Test fit the boot to confirm proper clearance. Recheck all fasteners after 48 hours of driving. Clean the carbon fiber surface with mild soap and dry microfiber cloth; apply protective wax if desired. Note: Installation requires basic mechanical knowledge. If uncomfortable with fastening or alignment, professional fitment is recommended. Improper installation may affect boot closure or water drainage. Elevate Your 7 Series This carbon fiber rear spoiler transforms your BMW 7 Series from refined sedan to dynamic performance machine. In under two hours, you'll shift the visual balance toward aggression without compromising elegance. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 · 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or Jaguar Land Rover. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is an aftermarket accessory designed for compatibility; it is not an official OEM part.

Victorious · BMW · Exhaust System Stainless Steel Tail Muffler Exhaust Pipe – BMW 7 Series F01 Premium 304 stainless steel exhaust finisher that enhances your BMW's presence with a sleek, refined aesthetic. F01 (2009–2014) 304 Stainless Steel Tail Pipe Finisher Silver or Black ISO9001 Certified Overview The BMW 7 Series F01 (2009–2014) represents the pinnacle of German executive luxury. This chassis demands components that match its refinement—and this stainless steel tail muffler exhaust pipe delivers exactly that. Machined from high-quality 304 stainless steel, this finisher replaces or complements your existing exhaust outlet, adding visual depth and presence to the rear of your 7 Series. Available in brushed silver or refined black, it harmonises seamlessly with any paint finish whilst providing years of corrosion resistance. Installation is straightforward using automotive-grade adhesive tape—no drilling, no modification to existing components. It's the perfect finishing touch for those seeking understated performance aesthetics without structural change. What's Included 📦 1x Stainless Steel Tail Finisher 304 stainless, pre-finished 🔧 Automotive Adhesive Tape Double-sided, industrial strength 📋 Installation Guide Clear step-by-step instructions Product Highlights 304 stainless steel construction—corrosion and weather resistant Two finish options: polished silver or satin black Compact, lightweight design (300g only) Dimensions: 30cm L × 15cm W × 10cm H Non-invasive adhesive installation—no permanent modification ISO9001 certified manufacturing process Perfect for concours condition or subtle performance upgrades Compatible with all 7 Series F01 model years (2009–2014) Factory-quality finish and edge work Instantly elevates rear-end visual presence Compatibility Model Years Status BMW 7 Series Sedan (F01) 2009–2014 Direct Fit BMW 7 Series Long Wheelbase (F02) 2009–2014 Direct Fit BMW 760i / 760Li (F01/F02) 2009–2014 Direct Fit BMW 750i / 750Li (F01/F02) 2009–2014 Direct Fit BMW 740i / 740Li (F01/F02) 2009–2014 Direct Fit Other BMW models Any Not Compatible Note: Always verify fitment with your specific chassis code before purchase. Request images of your current exhaust outlet if uncertain. Installation Notes Difficulty: Beginner | Time: 10–15 minutes Clean the existing exhaust outlet rim thoroughly with a microfibre cloth and mild degreaser. Allow to dry completely. Peel back the adhesive tape backing on the tail finisher. Do not touch the tape with bare fingers. Align the finisher carefully with your exhaust outlet opening. This is the critical step—take your time. Press firmly and evenly across the entire surface for 30 seconds, starting from the centre outward. Allow adhesive to cure for 24 hours before washing or driving in wet conditions. For removal: gently heat the adhesive with a heat gun (low setting) and peel away slowly. Use adhesive remover for residue. Important: This finisher is cosmetic. It does not alter exhaust function, emissions, or performance. Ensure your vehicle's exhaust system is in good working order before installation. If your outlet is damaged, cracked, or corroded, repair or replace it first. Ready to Refine Your 7 Series? Small touches create lasting impressions. This stainless steel tail finisher adds visual sophistication to your F01 without compromise. Trusted by BMW enthusiasts and detailers worldwide. Shop Now Use code 22GET20 for 20% off when you buy 2 items. ✓ 30-Day Money Back ✓ 4.9/5 Stars 12,300+ Reviews ✓ Worldwide Shipping DHL, FedEx, UPS ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to BMW, BMW AG, or Bayerische Motoren Werke. All product names and trademarks remain the property of their respective owners. This product is designed for aesthetic enhancement only and does not alter vehicle emissions, performance, or warranty status. Always consult your vehicle's handbook and a qualified technician if you have concerns about fitment or installation.

BMW · G11/G12 · Exterior Trim BMW 7 Series G11/G12 304 Stainless Steel Tail Exhaust Pipe Premium polished stainless steel tail trim for the iconic BMW 7 Series sedan—corrosion-resistant, easy-install luxury detailing. BMW G11/G12 2019–2020 304 Stainless Steel Exhaust Trim Silver & Black Adhesive Install Overview The BMW 7 Series G11/G12 is the definitive expression of luxury sedan engineering—refined, commanding, and built to impress. Your attention to detail extends to every visible surface, and the rear exhaust trim is no exception. These OEM-style stainless steel tail pipes elevate the rear aesthetic with a polished, purposeful finish that matches the precision engineering BMW owners expect. Crafted from premium 304 stainless steel, these exhaust trim pieces deliver durability without compromise. The material resists salt spray, UV exposure, and daily road contaminants, ensuring your finish stays brilliant for years. Available in sophisticated Silver and contemporary Black, they complement factory styling while adding understated visual presence. Installation is straightforward using the included automotive-grade adhesive tape—no drilling, no permanent modification. A natural upgrade for owners who refuse to overlook the details. What's Included 🏷️ Tail Exhaust Pipe Single stainless steel piece, 40cm 🔧 Adhesive Tape Automotive-grade bonding tape Product Highlights 304 stainless steel resists salt, humidity, and UV damage Two finishes: polished Silver or sleek Black 40cm length designed for OEM fitment Lightweight at 500g—no load impact Easy adhesive installation—no tools required Complements factory rear styling seamlessly ISO9001 certified manufacturing Non-destructive adhesive application Precise fitment for 2019–2020 models Restores or upgrades tired trim instantly Compatibility Model Generation Years Fit Status BMW 7 Series G11/G12 2019–2020 Direct Fit BMW 7 Series G11/G12 2021+ Not Compatible BMW 7 Series F01/F02 2009–2015 Not Compatible Other BMW Models Any Any Not Compatible Installation Notes Difficulty: Easy | Time: 10–15 minutes Clean the rear bumper surface thoroughly with mild soap and water; dry completely. Remove the protective backing from the adhesive tape on the stainless steel trim piece. Align the exhaust pipe trim with the factory exhaust outlet, ensuring even spacing on both sides. Press firmly into place, starting from the center and working outward to eliminate air gaps. Allow adhesive to cure for 24 hours before exposure to water or extreme heat. Important: Ensure your vehicle VIN matches the 2019–2020 G11/G12 generation before purchase. Pre-clean the installation surface for maximum adhesion. Do not install in temperatures below 10°C. Elevate Your 7 Series Rear Styling These precision stainless steel tail pipes deliver the refined detail your BMW 7 Series deserves. Built to last, designed to impress—add them to your cart today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9★ from 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL / FedEx shipping ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessory specialist and is not affiliated with BMW, the BMW Group, or Bayerische Motoren Werke AG. All product names, logos, and trademarks are the property of their respective manufacturers. Product fitment and compatibility are provided in good faith; buyers are responsible for verifying fit with their specific vehicle.

Victorious · Range Rover · Key Covers Range Rover Fashion Key Cover 2014+ Premium TPU key cover engineered to protect and personalize your Range Rover fob with fade-resistant color options. 2014–Present L405 / L460 TPU Material 4 Colors Scratch Resistant Overview Range Rover owners expect their accessories to match the sophistication of their vehicle. This fashion key cover is engineered from premium thermoplastic polyurethane (TPU)—the same material found in professional phone screen protectors—to deliver protection without bulk. It fits all 2014+ Range Rover models (L405 through current L460) and sits naturally on your OEM key fob without altering its pocket feel. The cover shields your key from daily wear, scratches, and accidental drops while keeping your personal style at the forefront. Available in red, blue, pink, and silver, each finish is formulated to resist fading even under extended UV exposure—crucial for a piece you'll handle every day. Why it matters: Your key fob is part of your vehicle's identity. A quality cover protects your investment, maintains resale value, and adds a small but meaningful personalization touch that reflects your ownership pride. What's Included 🔑 TPU Key Cover Thermoplastic polyurethane shell 🎨 4 Color Options Red, Blue, Pink, Silver ✓ Guaranteed Fit 2014+ Range Rover models Product Highlights Premium TPU material engineered for durability and grip Fade-resistant color finish maintains appearance long-term Slim profile preserves original key fob shape and pocket fit Protects against scratches, scuffs, and minor impact damage Compatible with Range Rover 2014–2026 (L405, L460) Easy slip-on installation—no tools required Four vibrant color choices for personal expression Low-profile design doesn't interfere with button operation UV-stabilized material resists sun damage and weathering Affordable protection paired with premium aesthetics Compatibility Model Years Code Fit Status Range Rover Vogue 2014–2020 L405 Direct Fit Range Rover Vogue 2022–2026 L460 Direct Fit Range Rover Sport 2014–2022 L494 Direct Fit Range Rover Evoque 2014–2020 L538 Direct Fit Range Rover Evoque 2020–2026 L551 Direct Fit Range Rover Velar 2018–2022 L560 Direct Fit Land Rover Discovery 5 2017–2024 LC Direct Fit Land Rover Defender 2020–2026 L663 Direct Fit Installation Difficulty: Beginner | Time: 2 minutes Remove your Range Rover key fob from your pocket or bag. Align the TPU cover opening with the base of your key fob. Gently slide the cover over the fob body until it sits flush and secure. Press the cover edges down to ensure full contact and a snug fit. Test button operation to confirm the cover doesn't interfere with locks or panic functions. Note: Do not force the cover over the fob. If resistance is felt, ensure you're aligning the opening correctly. The fit should be snug but not strained. Ready to Protect Your Key in Style? A quality key cover is a small investment that delivers daily satisfaction. Shop our full Range Rover accessory collection and enjoy 30 days to love it—or your money back. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessories specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Range Rover, or any official Land Rover entity. All vehicle names and codes are used for compatibility reference only. Product fit and performance are guaranteed by Victorious Automotive alone.

Victorious Automotive · Audi A1 · Infotainment Upgrade Wireless CarPlay & Android Auto Adapter for Audi A1 2012–2018 MMI 2G/3G Retrofit wireless Apple CarPlay and Android Auto directly into your Audi A1's factory MMI system — no screen replacement, no complex wiring, no compromise. Audi A1 2012–2018 MMI 2G / 3G Wireless CarPlay Android Auto Plug & Play Siri Voice Control Rear Camera Support Model: WJAU-3 Android OS Bluetooth Overview The Audi A1 built between 2012 and 2018 ships with Audi's MMI 2G or 3G infotainment architecture — a solid system for its era, but one that predates the wireless connectivity that modern drivers expect as standard. If you've grown accustomed to seamless iPhone or Android integration and find yourself reaching for a phone mount instead of using your dashboard, this adapter was built precisely for you. This wireless CarPlay and Android Auto retrofit adapter integrates directly with your A1's existing MMI hardware via a clean plug-and-play connection. There's no need to swap your head unit, cut cables, or void your factory setup. The adapter leverages your car's existing screen, controls, and steering wheel buttons — making the upgrade feel factory-fitted rather than bolted on. Beyond CarPlay and Android Auto, the adapter runs a full Android operating system, opening up YouTube, Netflix, Spotify, Waze, and more through Airplay and mirror-linking. USB flash drive support adds offline media playback, and rear or front camera compatibility makes it a genuinely comprehensive infotainment upgrade for a car that deserves better than its original spec. What's Included 📦 CarPlay Adapter Module WJAU-3 unit, model-specific for Audi MMI 2G/3G 🔌 Plug-and-Play Harness Factory-connector compatible wiring loom 📡 Wireless Antenna For stable wireless phone pairing 🎥 RCA Camera Input Supports aftermarket front or rear cameras 📋 Installation Guide Step-by-step setup instructions included 🔧 Mounting Hardware All fixings required for clean installation Product Highlights Wireless Apple CarPlay — connect your iPhone without a cable Android Auto & Android Mirror-Linking support built-in Real-time GPS navigation via Google Maps, Waze, and Apple Maps Siri voice control fully functional through factory microphone Hands-free calling via Bluetooth with OEM audio output Stream YouTube, Netflix, and Spotify via Airplay or mirroring Offline video and music playback via USB flash drive Supports aftermarket front, rear, or 360-degree cameras via RCA Steering wheel control retention — no button remapping needed Plug-and-play install into existing MMI 2G/3G — no head unit swap Compatibility Model Year Range MMI System Fitment Audi A1 2012 – 2018 MMI 2G / 3G Direct Fit Audi Q3 2012 – 2018 MMI 2G / 3G Direct Fit Audi A1 (Pre-2012) Before 2012 Non-MMI Not Compatible Audi A1 (Post-2018) 2019 onwards MIB2 / MIB3 Not Compatible Other Audi Models Various MMI 2G / 3G Verify Before Purchase ⚠ Compatibility Note: This adapter is designed specifically for vehicles fitted with Audi MMI 2G or MMI 3G systems. If you are unsure which MMI version your vehicle has, please contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Remove the MMI head unit from the Audi A1 dashboard using appropriate trim removal tools. Take care not to damage surrounding trim panels. Locate the factory MMI connector at the rear of the head unit. The adapter harness connects directly here — no splicing or cutting required. Route the adapter module to a suitable location behind the head unit or within the centre console void, ensuring adequate ventilation. If connecting an aftermarket camera, run the RCA cable to the desired camera location at this stage before reassembling trim. Reconnect the factory MMI connectors through the adapter harness, then reinstall the head unit into the dashboard. Power on the vehicle and follow the on-screen pairing instructions to connect your iPhone or Android device wirelessly via Bluetooth and Wi-Fi. Test steering wheel controls, audio output, navigation, and camera feed before completing the installation. ⚠ Important: Always disconnect the vehicle's battery negative terminal before working on infotainment or electrical components. If you are not confident with automotive electrical work, we recommend professional installation to protect your vehicle's warranty and avoid unintended faults. Upgrade Your Audi A1's Infotainment Join over 12,300 verified customers who trust Victorious Automotive for precision-fit vehicle upgrades. Worldwide delivery via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop Infotainment Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or associated with Audi AG, Volkswagen Group, Apple Inc., or Google LLC. All brand names, model designations, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Audi Q3 · Infotainment Upgrade Wireless CarPlay & Android Auto Adapter for Audi Q3 2012–2018 MMI 2G/3G Transform your Audi Q3's original MMI system into a fully connected, wireless CarPlay and Android Auto hub — with zero screen replacement required. Audi Q3 · 2012–2018 MMI 2G / 3G Wireless CarPlay Android Auto Plug & Play Siri Voice Control Rear Camera Support Model: WJAU-3 Android OS Bluetooth Overview The Audi Q3 — built between 2012 and 2018 — was designed with Audi's signature MMI interface, which was ahead of its time but now falls short of the seamless smartphone connectivity that modern drivers expect. Whether your Q3 is running MMI 2G or 3G, the factory system simply wasn't engineered for wireless CarPlay, Android Auto, or the streaming services that define how we use our phones on the road today. This wireless CarPlay adapter for the Audi Q3 is a purpose-built retrofit solution that integrates directly into your existing MMI unit via the factory interface — no screen swaps, no invasive wiring, no loss of your original controls. Running on a dedicated Android platform with 1GB RAM and 8GB ROM, it operates independently of your phone's processing power, delivering a consistently smooth, responsive experience across Apple CarPlay, Android Auto, iOS Airplay, and Android Mirror-Linking. Once connected, you gain access to real-time navigation via Google Maps or Waze, hands-free calling, Siri voice control, Spotify, YouTube, Netflix, and full USB media playback — all displayed on your factory MMI screen and controlled through the original MMI dial and buttons. For Q3 owners who want genuine smart connectivity without compromising the factory aesthetic, this is the definitive upgrade. What's Included 📦 CarPlay Adapter Module Model WJAU-3 · Android OS · 1GB RAM / 8GB ROM 🔌 Factory MMI Interface Harness Direct plug-in for MMI 2G & 3G systems 📡 Wireless Antenna For stable wireless CarPlay & Android Auto pairing 🎥 RCA Video Input Cable Supports aftermarket front or rear camera feed 🖥️ USB Flash Port Supports offline media playback up to 8GB 📋 Installation Guide Step-by-step setup instructions included Product Highlights Wireless Apple CarPlay — no USB cable needed once paired Wireless Android Auto & full Android Mirror-Linking Real-time navigation via Google Maps, Waze, and Apple Maps Siri & Google Assistant voice control, fully hands-free iOS Airplay for screen mirroring from iPhone or iPad Streams YouTube, Netflix, and Spotify over Wi-Fi or hotspot Supports aftermarket front, rear, and 360° camera inputs via RCA Offline video & music playback via USB flash drive (up to 8GB) Steering wheel control compatibility retained via factory interface Plug-and-play design — preserves original MMI look and feel Compatibility Model Year Range MMI System Fitment Audi Q3 2012 – 2018 MMI 2G Direct Fit Audi Q3 2012 – 2018 MMI 3G Direct Fit Audi A1 2012 – 2018 MMI 2G / 3G Direct Fit Audi Q3 (F3) 2019 – Present MIB3 / MIB4 Not Compatible Audi Q3 without MMI 2012 – 2018 No MMI fitted Not Compatible ⚠ Unsure of your MMI version? Check your MMI unit's version number in the settings menu under "System Information," or contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. We're happy to confirm compatibility for your specific vehicle. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Carefully remove the MMI control panel surround using a trim removal tool to avoid scratching the dash. Locate the factory MMI harness connector at the rear of the unit and disconnect it from the head unit. Connect the adapter's harness to the factory MMI plug, then reconnect to the head unit — the adapter sits inline between the two. Route the wireless antenna to a discreet location with line-of-sight to the cabin (above the headliner or behind the trim panel). If using a rear or front camera, connect the RCA video cable to the corresponding camera output. Refit the MMI surround trim, power on the vehicle, and follow the on-screen pairing instructions to connect your phone via Bluetooth or Wi-Fi. On first use, accept the CarPlay or Android Auto prompt on your phone. Subsequent connections are automatic and wireless. ⚠ Important: Ensure your vehicle's ignition is fully off before beginning installation. Do not force any connectors — the MMI harness is keyed and will seat correctly without excessive pressure. If you are not confident working with in-car electronics, we recommend professional installation. Upgrade Your Audi Q3 Experience Your Q3 deserves more than a seven-year-old infotainment experience. This adapter brings genuine wireless connectivity to your factory MMI — no compromise, no clutter, no cutting corners. Shipped worldwide via DHL, FedEx, UPS, and TNT, and backed by our 30-day money-back guarantee. Shop More Infotainment Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🚚 Worldwide Shipping · DHL · FedEx · UPS · TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Audi AG, Volkswagen Group, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchasing.

BMW · EVO iDrive System · Connectivity Upgrade BMW Wireless Apple CarPlay Adapter for EVO iDrive — Plug-and-Play Smart Integration Upgrade your BMW's factory EVO iDrive display to full wireless Apple CarPlay with HD video streaming, voice control, and Android mirroring — no cable, no compromise. BMW EVO System Wireless CarPlay Android 1GB RAM / 8GB ROM 6.5" · 8.8" · 10.2" Display Bluetooth Connectivity RCA Interface 12V Power Plug-and-Play Install HD Airplay / Android Mirror Aftermarket Camera Support Overview BMW's EVO iDrive system is one of the most capable factory infotainment platforms in the segment — but its native wired CarPlay setup can feel limiting in an era where wireless connectivity is the expectation. If you're spending time behind the wheel of a 3 Series, 5 Series, X3, X5 or any compatible EVO-equipped BMW, you deserve an experience that keeps pace with how you actually use your phone. This Wireless Apple CarPlay Adapter integrates directly with your existing EVO head unit, transforming it into a fully connected smart display. Built on an Android-powered platform with 1GB RAM and 8GB ROM, the unit supports real-time navigation, online music streaming, HD Airplay video mirroring, and full Android device screen projection — all through your vehicle's factory screen. No aftermarket head unit replacement. No destructive modification. Just a clean, confident upgrade. Beyond CarPlay itself, the adapter unlocks genuine everyday functionality that the stock system simply doesn't offer: aftermarket reversing camera integration, rear-seat entertainment via mirror-link, hands-free calling over Bluetooth, and voice assistant access via Siri or Google Assistant. Compatible with 6.5", 8.8", and 10.2" EVO display sizes, it's a versatile solution engineered for drivers who want more from their driving environment without altering what makes their BMW a BMW. What's Included 📦 Wireless CarPlay Adapter Android-based, 1GB RAM / 8GB ROM — 18×12×8cm unit 📘 User Manual Step-by-step setup and pairing instructions 🔧 Installation Kit All required hardware and wiring adapters included 🔌 RCA Interface Cable For camera and auxiliary device connectivity Product Highlights Wireless Apple CarPlay — no cable required, pairs instantly on ignition Android Auto Mirroring — full screen projection from Android devices Real-Time Navigation — Google Maps, Waze and Apple Maps supported Online Music Streaming — Spotify, Apple Music, YouTube Music and more HD Airplay Video Streaming — mirror content in HD to your factory display Aftermarket Camera Support — reversing and surround camera integration via RCA Mirror-Link Enabled — rear passenger entertainment and screen sharing Voice Control — Siri and Google Assistant hands-free access Hands-Free Calling — Bluetooth-powered call management via the display Plug-and-Play Design — no permanent modification to your factory EVO system Compatibility Model EVO System Display Size Fitment BMW 3 Series (F30 / G20) EVO iDrive 6.5" / 8.8" Direct Fit BMW 5 Series (F10 / G30) EVO iDrive 8.8" / 10.2" Direct Fit BMW X3 (F25 / G01) EVO iDrive 6.5" / 8.8" Direct Fit BMW X5 (F15 / G05) EVO iDrive 10.2" Direct Fit BMW X1 (F48) EVO iDrive 6.5" / 8.8" Direct Fit BMW 7 Series (G11 / G12) EVO iDrive 10.2" Direct Fit BMW Models with Non-EVO NBT / CIC / CCC Legacy iDrive Various Not Compatible BMW iDrive 8 / Curved Display Models (i4, iX, G80 M3) iDrive 8 Various Verify Before Purchase Installation Notes Difficulty: Intermediate  ·  Estimated Time: 30–60 Minutes Confirm your BMW is equipped with the EVO iDrive system and note your factory display size (6.5", 8.8", or 10.2") before beginning. Power down the vehicle and disconnect the iDrive unit from the factory harness using the connectors provided in the installation kit. Connect the Wireless CarPlay Adapter inline between the factory harness and the iDrive unit using the supplied interface cables. If integrating an aftermarket reversing camera, route and connect the RCA interface cable to your camera output at this stage. Secure the adapter unit in a suitable location behind the dashboard or within the centre console void, ensuring no pinching of cables. Reconnect the vehicle power and follow the on-screen pairing wizard to connect your iPhone via Bluetooth for wireless CarPlay activation. Test all functions — navigation, media, voice control, and camera feed — before refitting any trim panels. ⚠ Important: Professional installation is strongly recommended to preserve your factory wiring integrity and ensure optimal performance. Always verify EVO system compatibility with your specific model year and build spec prior to purchase. Incorrect installation may affect factory system functionality. Upgrade Your Drive. Keep Your BMW Exactly As It Should Be. The best in-car technology shouldn't require compromising what you love about your vehicle. This adapter delivers wireless CarPlay, HD streaming, and smart connectivity through your factory EVO display — cleanly, confidently, and without a trace. Shop the Full Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by BMW AG, Apple Inc., or any associated OEM. All brand names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of describing product compatibility. Always verify fitment with your specific vehicle build specification prior to purchase.

Victorious Automotive · BMW CCC · Infotainment Upgrades BMW CCC Wireless Apple CarPlay Adapter — 2004–2009 E-Series Models Bring full wireless Apple CarPlay connectivity to your BMW's original CCC screen — no cutting, no permanent modifications, no compromise on build quality. CCC Platform 2004–2009 Wireless CarPlay Android OS Bluetooth Built-in GPS Aluminium Housing Double DIN Steering Wheel Control Mirror Link Overview BMW's CCC (Car Communication Computer) platform was ahead of its time when it debuted in the mid-2000s, but today's connected driver expects more — specifically, seamless smartphone integration without reaching for a cable. If you own an E81, E87, E90, E60, E63, E70 or similar CCC-equipped BMW, this adapter was purpose-built for your vehicle's architecture. This wireless CarPlay adapter slots directly into your existing Double DIN bay and interfaces with the CCC system, delivering full Apple CarPlay and Android mirror-link functionality through your factory display. The Android-based unit runs independently of your phone's battery, supports real-time navigation, hands-free calling via Bluetooth, Siri voice control, and offline media playback — all without any permanent wiring changes to your vehicle. The aluminium housing keeps heat dissipation efficient and adds a premium finish in line with BMW's interior standards. With support for aftermarket cameras, steering wheel controls, and AirPlay HD video mirroring, this is one of the most complete infotainment upgrades available for the CCC generation of BMW. What's Included 📦 Wireless CarPlay Adapter CCC-compatible Double DIN unit with aluminium housing 📄 Instruction Manual Step-by-step installation and pairing guide Product Highlights Wireless Apple CarPlay — no cable required, pairs instantly via Bluetooth then switches to Wi-Fi Android Mirror-Link — full Android screen mirroring for compatible smartphones Real-Time Navigation — Google Maps, Waze and Apple Maps fully supported Online Music Streaming — Spotify, Apple Music and more through your car's speakers Siri Voice Control — completely hands-free operation while driving Hands-Free Calling — Bluetooth-integrated phone calls via factory microphone Aftermarket Camera Support — connect a reversing or surround camera to the unit Steering Wheel Control Compatibility — retain your existing steering wheel media controls Offline Media via USB — play music and video from a USB flash drive without a phone connection AirPlay HD Video Mirroring — stream HD video wirelessly from iPhone to your factory screen Compatibility Model Chassis Code Years Fitment 1 Series Hatchback 3dr E81 2004–2008 Direct Fit 1 Series Coupé E82 2004–2008 Direct Fit 1 Series Hatchback 5dr E87 2004–2008 Direct Fit 1 Series Convertible E88 2004–2008 Direct Fit 3 Series Saloon E90 2005–2008 Direct Fit 3 Series Touring E91 2005–2008 Direct Fit 3 Series Coupé E92 2005–2008 Direct Fit 3 Series Convertible E93 2005–2008 Direct Fit 5 Series Saloon E60 2003–2008 Direct Fit 5 Series Touring E61 2003–2008 Direct Fit 6 Series Coupé E63 2003–2008 Direct Fit 6 Series Convertible E64 2003–2008 Direct Fit X5 E70 2007–2009 Direct Fit X6 Hybrid E72 2008–2009 Direct Fit CIC / NBT Platform Models Various 2009+ Not Compatible Specifications Specification Detail Platform Compatibility BMW CCC (Car Communication Computer) Form Factor Double DIN Display Sizes Supported 6.5", 8.8", 10.2" Operating System Android RAM 1 GB Max External Memory 8 GB TF / Micro SD Slot 1 slot Output Power 0.01 kW Housing Material Aluminium Item Weight 1 kg Special Features Bluetooth, Built-in GPS, CarPlay, Mirror-Link, Steering Wheel Control, MP3 Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 Minutes Safely disconnect your BMW's battery negative terminal before beginning any work on the dashboard or infotainment bay. Remove the factory CCC head unit using appropriate trim removal tools — take care around the iDrive controller surround and climate fascia clips. Disconnect all factory harness connectors from the back of the CCC unit and set it aside safely. Connect the adapter's harness to the factory connectors using the supplied loom — the unit is designed as a direct plug-in replacement for the CCC bay. Carefully slide the adapter into the Double DIN aperture, ensuring it sits flush with the surrounding trim and securing any mounting brackets. Reconnect the battery, power on the vehicle and follow the on-screen pairing guide to connect your iPhone via Bluetooth for initial handshake — CarPlay then transfers to Wi-Fi automatically. Configure steering wheel control mapping and camera input settings through the unit's Android settings menu as required. ⚠ Important: Verify your vehicle is equipped with the CCC platform (not CIC or NBT) before purchasing. Check your existing head unit — CCC units display "Navigation" or "Business" branding and were fitted to pre-2009 E-Series models. Professional installation is recommended to preserve your vehicle's wiring integrity and warranty standing. Upgrade Your BMW's Infotainment Today Give your CCC-equipped BMW the connected experience it deserves. Wireless CarPlay, real-time navigation, and hands-free calling — all through your factory screen. Orders ship worldwide via DHL, FedEx, UPS and TNT. Shop Now at Victorious Use Code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee ✈️ Worldwide Shipping via DHL · FedEx · UPS · TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by BMW AG, Apple Inc., or any of their subsidiaries. All manufacturer names, model designations, and chassis codes are used for fitment reference purposes only. Ensure compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · BMW · Infotainment Upgrades BMW CIC Adapter Box — Wireless Apple CarPlay Integration for Compatible BMW Models Retrofit wireless Apple CarPlay to your BMW's CIC head unit with a clean, plug-and-play adapter box that delivers Android-powered navigation, mirroring, and hands-free connectivity without replacing your original screen. BMW CIC Wireless CarPlay Android OS 1G RAM / 8G ROM Aluminum Housing 12V Steering Wheel Control Plug-and-Play HD Video Streaming 8.8" / 6.5" / 10.2" Display Overview BMW's CIC (Car Information Computer) infotainment platform was a landmark system when introduced, delivering a refined iDrive experience across a wide range of 3 Series, 5 Series, 6 Series, X3, X5, and X6 models. However, it predates wireless smartphone integration entirely — leaving owners with a capable screen but no native path to Apple CarPlay, real-time navigation, or streaming audio. That gap no longer needs to exist. This BMW CIC Adapter Box is an Android-based interface module that sits between your existing CIC head unit and its display, effectively adding a full wireless CarPlay and Android entertainment layer without removing or permanently modifying any factory components. Powered by a dedicated Android OS with 1G of RAM and 8G of onboard storage, it handles everything from Siri voice control and Google Maps to HD video streaming via Airplay and Android mirroring — all presented on your vehicle's original screen. The adapter supports display sizes of 8.8", 6.5", and 10.2" and retains compatibility with your BMW's steering wheel controls, making the experience feel deeply integrated rather than bolted on. Aftermarket camera inputs are supported, and the aluminium housing ensures heat dissipation and long-term durability in an under-dash environment. For BMW owners who want the conveniences of a modern infotainment system without the cost or irreversibility of a full head unit swap, this adapter represents the most elegant solution available. What's Included 📦 CIC Adapter Box Android-powered wireless CarPlay module, aluminium housing 📄 Installation Guide Step-by-step instructions for CIC system integration Product Highlights Wireless Apple CarPlay — connect your iPhone without a cable for a clutter-free cabin Android OS platform with 1G RAM and 8G ROM for smooth, responsive performance Real-time navigation via Google Maps, Waze, and Apple Maps through CarPlay Online music streaming — Spotify, Apple Music, and more through your existing speakers HD video streaming via Airplay and Android screen mirroring Hands-free calling and full Siri voice control integration Supports aftermarket reverse and surround cameras via auxiliary input Mirror-link compatibility for Android smartphones Steering wheel control retention — no remapping required Supports 8.8", 6.5", and 10.2" original BMW CIC display sizes Compatibility Vehicle / Platform Head Unit Type Compatibility BMW 3 Series (E90/E91/E92/E93) with CIC CIC iDrive Direct Fit BMW 5 Series (F10/F11) with CIC CIC iDrive Direct Fit BMW 6 Series (F12/F13) with CIC CIC iDrive Direct Fit BMW X3 (F25) with CIC CIC iDrive Direct Fit BMW X5 (E70) with CIC CIC iDrive Direct Fit BMW X6 (E71) with CIC CIC iDrive Direct Fit BMW models with NBT / EVO head unit NBT / EVO iDrive Not Compatible BMW models with CCC head unit CCC iDrive Not Compatible Non-BMW vehicles Various Not Compatible ⚠ Compatibility Note: This adapter is designed exclusively for BMW vehicles fitted with the CIC (Car Information Computer) iDrive system. It is not compatible with CCC, NBT, or EVO-generation head units. Please confirm your exact head unit type before ordering. If you are unsure, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will verify compatibility for your specific model and build date. Installation Notes ⚙ Installation Overview — Difficulty: Moderate · Estimated Time: 60–90 Minutes Confirm your BMW is fitted with the CIC iDrive system by checking the iDrive menu version or consulting your vehicle documentation. Disconnect the vehicle battery before beginning any work on the infotainment system to prevent electrical faults. Remove the trim panel surrounding the CIC head unit using appropriate trim tools — take care not to damage climate control or iDrive controller wiring. Locate the CIC display connector and video input harness at the rear of the head unit assembly. Connect the CIC Adapter Box inline using the provided harness connections, following the installation guide supplied in the box. Secure the adapter box in a suitable under-dash location with adequate ventilation — the aluminium housing dissipates heat effectively but requires airflow. Reconnect the battery and power on the system to verify the adapter initialises correctly on your BMW's display. Pair your iPhone wirelessly via the adapter's CarPlay setup menu and confirm steering wheel controls are functioning as expected. ⚠ Professional Installation Recommended: While this adapter is designed for integration with existing CIC wiring, incorrect connection can result in display errors or head unit faults. We strongly recommend professional installation by a qualified BMW technician or automotive AV specialist for optimal performance and to preserve your factory system's integrity. Upgrade Your BMW's Infotainment — Without Compromise Your BMW's CIC screen is already there. This adapter simply unlocks everything it was never designed to do — wirelessly, cleanly, and without a trace. Shop the full range of infotainment upgrades and accessories at Victorious Automotive. Shop All Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by BMW AG, Apple Inc., or any of their subsidiaries. BMW, iDrive, and CIC are registered trademarks of BMW AG. Apple CarPlay is a registered trademark of Apple Inc. All trademarks are referenced solely for fitment and compatibility identification purposes. Always verify compatibility with your specific vehicle before purchasing. Professional installation is recommended.

BMW · NBT System · Wireless Connectivity BMW NBT Wireless Apple CarPlay Adapter Box Retrofit wireless Apple CarPlay and full smartphone mirroring to BMW NBT-equipped models — no cables, no compromise, factory-finish integration. NBT System Wireless CarPlay Android Mirroring Plug & Play AirPlay Support 12V Aluminium Housing 8.8" / 6.5" / 10.2" Overview BMW's NBT (Next Big Thing) iDrive system was ahead of its time, but factory CarPlay support was either absent or restricted to a wired connection. For owners who demand a cleaner, more capable cockpit experience, this gap has long been a frustration — particularly given how refined everything else about the NBT platform is. This NBT Wireless Apple CarPlay Adapter Box bridges that gap entirely. Engineered specifically for BMW's NBT head unit architecture, the adapter integrates at the system level to deliver native-feeling wireless CarPlay, Android screen mirroring, AirPlay video streaming, and full voice control via Siri — all displayed through your existing factory screen without any modifications to the dash or original hardware. Built into an aluminium housing and designed to be tucked discreetly behind the dash, this adapter draws power directly from the vehicle's 12V supply and connects via the existing iDrive infrastructure. The result is a seamless upgrade that feels as though it left the factory that way — and performs to the standard expected of a premium BMW cabin. What's Included 📦 Wireless CarPlay Adapter Main NBT-compatible adapter unit in aluminium housing 📖 User Manual Step-by-step setup and configuration guide 🔧 Installation Kit All required cables, connectors and mounting hardware Product Highlights Fully wireless Apple CarPlay — no USB cable required once paired Android screen mirroring for full smartphone display on your iDrive screen Real-time navigation via Apple Maps, Google Maps or Waze Stream music wirelessly from Spotify, Apple Music, YouTube Music and more Siri voice control for completely hands-free operation while driving Hands-free calling integrated through your existing BMW audio system AirPlay video mirroring for HD content from iOS devices Compatible with aftermarket and OEM reversing cameras Supports displays sized 6.5", 8.8" and 10.2" across NBT variants Discreet aluminium-housed unit — no visible changes to the factory interior Compatibility Vehicle / System Head Unit Display Size Fitment BMW 1 Series F20/F21 (2013–2019) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 2 Series F22/F23 (2013–2021) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 3 Series F30/F31 (2012–2019) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 4 Series F32/F33/F36 (2013–2020) NBT / NBT Evo 6.5" / 8.8" Direct Fit BMW 5 Series F10/F11 (2013–2017) NBT 10.2" Direct Fit BMW 6 Series F06/F12/F13 (2013–2018) NBT 10.2" Direct Fit BMW 7 Series F01/F02 (2012–2015) NBT 10.2" Direct Fit BMW X1 F48 (2015–2019) NBT Evo 8.8" Direct Fit BMW X3 F25 (2014–2017) NBT 8.8" Direct Fit BMW X5 F15 (2013–2018) NBT 10.2" Direct Fit BMW X6 F16 (2014–2019) NBT 10.2" Direct Fit BMW models with CIC system (pre-2013) CIC Various Not Compatible BMW models with MGU / iDrive 7+ (post-2019) MGU / ID7 Various Not Compatible Installation Notes ⏱ Estimated Time: 45–90 minutes  |  🔧 Difficulty: Intermediate Confirm your vehicle has an NBT or NBT Evo head unit by checking the iDrive system menu or VIN decoder before beginning. Disconnect the vehicle battery negative terminal and allow the iDrive system to fully power down. Remove the centre console trim and glovebox panels as required to access the rear of the iDrive head unit — refer to your vehicle's service manual for panel removal sequences. Locate the LVDS and USB/power harness connectors on the rear of the NBT unit and connect the supplied adapter harness in-line using the included installation kit. Mount the adapter box in a suitable location behind the dash using the provided brackets, ensuring clearance from heat sources and moving components. Reconnect the battery, power on the vehicle and follow the on-screen pairing wizard to connect your iPhone via Bluetooth for wireless CarPlay activation. Verify all functions — CarPlay, mirroring, camera input and audio — before refitting all trim panels. ⚠ Important: Verify your exact head unit variant (NBT vs NBT Evo) prior to installation — connector pinouts differ between generations. If in doubt, consult a qualified BMW technician. Incorrect connection may cause iDrive system faults. Technical Specifications Specification Detail Compatible System BMW NBT / NBT Evo iDrive Supported Display Sizes 6.5", 8.8", 10.2" Operating System Android (embedded) RAM 1GB Max External Memory 8GB Output Power 0.01kW Input Voltage 12V DC Housing Material Aluminium Unit Dimensions 180mm × 120mm × 80mm Wireless Protocol Bluetooth 5.0 + Wi-Fi 2.4GHz/5GHz Upgrade Your BMW iDrive Experience Wireless CarPlay shouldn't be a luxury reserved for newer models. This NBT adapter gives your BMW the seamless smartphone integration it always deserved — cleanly, discreetly, and without touching the factory interior. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by BMW AG or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Porsche Panamera · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Panamera (2010–2016) – PCM 3.1 Bring full wireless Apple CarPlay and Android Auto to your 2010–2016 Porsche Panamera PCM 3.1 system — plug-and-play fitment, zero permanent modification. Porsche Panamera PCM 3.1 2010–2016 Wireless CarPlay Android Auto Plug & Play Siri Voice Control Reverse Camera Support Android Mirroring Aluminium Housing Overview The Porsche Panamera built between 2010 and 2016 came equipped with Porsche Communication Management 3.1 — a competent system for its era, but one that predates the smartphone integration that modern driving demands. If you've grown accustomed to using Apple Maps, Waze, Spotify, or hands-free calling through CarPlay in other vehicles, returning to PCM's native interface can feel like a step back. This wireless Apple CarPlay adapter is engineered specifically for the PCM 3.1 platform found across the 2010–2016 Panamera lineup. It connects directly into the existing architecture of your Porsche's infotainment system without replacing the head unit, preserving all OEM functionality while layering in full wireless CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. Your Porsche retains its factory look — there are no aftermarket screens, no cut wires, and no evidence of modification. The adapter communicates with your iPhone via Bluetooth for the initial pairing handshake, then switches automatically to a stable Wi-Fi connection for full wireless CarPlay performance. Steering wheel controls, the PCM NAVI button, and your original microphone circuit all remain functional — with a dedicated replacement microphone included to maintain hands-free call quality since the OEM unit shares circuitry with the SOS system. What's Included 📦 PCM 3.1 CarPlay Module Main adapter unit, aluminium housing, silver finish 🎙️ Replacement Microphone For hands-free calling, bypasses SOS-integrated OEM mic 🔌 Vehicle Harness Cable Direct-connect loom for PCM 3.1 interface 🔩 Mounting Hardware Includes additional screws for Sirius Satellite Radio-equipped vehicles 📄 Installation Guide Step-by-step printed instructions 💾 USB Flash Support Play offline media directly via USB input (up to 32GB) Product Highlights Wireless Apple CarPlay — connect via Bluetooth + Wi-Fi, no USB cable needed Wired Apple CarPlay also supported for maximum stability preference Android Auto compatibility for Google Maps, Assistant, and media apps Android screen mirroring for full phone display on PCM screen Original PCM steering wheel and dashboard button controls retained Siri voice control for safe, hands-free iPhone interaction Supports aftermarket front and reverse cameras via camera input AirPlay and Android Mirror-Link for HD video and music streaming USB Flash Drive playback for offline video and music without internet Plug-and-play installation — no permanent modification to OEM wiring Compatibility Model Year Range PCM Version Fitment Panamera 2010–2016 PCM 3.1 Direct Fit Cayenne 2010–2016 PCM 3.1 Direct Fit Macan 2010–2016 PCM 3.1 Direct Fit Cayman 2010–2016 PCM 3.1 Direct Fit Boxster 2010–2016 PCM 3.1 Direct Fit 911 / 991 2010–2016 PCM 3.1 Direct Fit 718 2010–2016 PCM 3.1 Direct Fit Any model with CD-AUX button (no NAVI) — Non-PCM 3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 Minutes Confirm your Porsche PCM has a NAVI button on the control panel. If only a CD-AUX button is present, this adapter will not function — do not proceed. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation. We will include specific supplementary screws required for your configuration. Remove the PCM 3.1 head unit from the dash using appropriate trim removal tools — take care not to damage surrounding trim panels. Disconnect the OEM wiring harness from the rear of the PCM unit and connect the supplied adapter harness in-line between the PCM and the vehicle loom. Route and connect the replacement microphone to the adapter — do not reconnect the original OEM microphone, as it shares circuitry with the vehicle's SOS emergency system. Secure the CarPlay module in an accessible cavity behind the dash. Ensure no pinched cables before refitting the head unit. Refit the PCM unit, power up the vehicle, and follow the on-screen pairing instructions to connect your iPhone via Bluetooth for the initial wireless CarPlay setup. ⚠ Important: The original factory microphone must not be reused. It is integrated with the Porsche SOS emergency call system. The included replacement microphone provides equivalent call quality without interfering with safety systems. Driven by Detail. Built for Enthusiasts. At Victorious Automotive, every product we list is selected because it genuinely improves the ownership experience. If you have questions about fitment, PCM version, or installation for your specific Panamera, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop All In-Car Technology Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model names, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification. Apple CarPlay® is a registered trademark of Apple Inc. Android Auto™ is a trademark of Google LLC.

Victorious Automotive · Porsche Macan · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche Macan 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay and Android Auto to your Porsche Macan's factory PCM3.1 system — plug-and-play, no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Porsche Macan Plug & Play Siri Voice Control Camera Support Steering Wheel Control iOS & Android Overview The Porsche Macan (2010–2016) equipped with the PCM3.1 infotainment system is a driver's machine — precise, purposeful and beautifully engineered. But its factory connectivity falls short of what today's drivers expect. Native Apple CarPlay or Android Auto simply wasn't available at the time of manufacture, leaving owners relying on outdated Bluetooth audio or cable workarounds that feel out of place in a car of this calibre. This PCM3.1 wireless Apple CarPlay adapter resolves that entirely. Engineered specifically for Porsche's factory head unit, it integrates seamlessly behind the scenes — no screen replacement, no head unit swap, no permanent wiring changes. Once installed, your existing PCM3.1 display becomes a fully functional CarPlay and Android Auto interface, accessible wirelessly from your iPhone the moment you get in the car. Steering wheel controls continue to function as expected, original buttons retain their factory behaviour, and a dedicated microphone is included to preserve safe hands-free calling — since the factory microphone is tied to Porsche's SOS system. This is the clean, factory-grade upgrade your Macan deserves. What's Included 📦 CarPlay Adapter Module PCM3.1-specific interface box 🎙️ Dedicated Microphone For hands-free calls, replaces SOS-integrated mic 🔌 Wiring Harness Direct plug-in, no splicing required 🔧 Mounting Hardware Includes screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step instructions included 🖥️ USB Cable For wired CarPlay connection option Product Highlights Wireless Apple CarPlay — no cable needed, connects automatically via Bluetooth Wired Apple CarPlay support also available for maximum stability Android Auto compatibility for all major Android smartphones Android screen mirroring for full device display on PCM3.1 Siri voice control for safe, hands-free operation while driving Original steering wheel and factory PCM buttons remain fully functional Front and reverse aftermarket camera support built in Airplay and Android mirror-linking for HD video streaming USB flash drive playback for offline music and video True plug-and-play installation — no permanent vehicle modifications Compatibility Model Years System Fitment Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Porsche Models with CD-AUX Button Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes  ·  Tools: Basic trim tools, screwdrivers Confirm your Porsche's control panel has a NAVI button — this adapter requires PCM3.1 with NAVI functionality. If your vehicle has a CD-AUX button instead, this unit will not be compatible. Remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Disconnect the factory connectors carefully. Connect the included wiring harness to the rear of the factory PCM3.1 unit and to the adapter module — no wire cutting or permanent modification is required. Fit the dedicated microphone in a discreet location near the driver (sun visor or A-pillar area recommended) and route the cable tidily behind trim panels. If your vehicle is fitted with Sirius Satellite Radio, contact us before installation — additional screws will be dispatched to ensure correct fitment. Refit the PCM3.1 unit and all trim panels. Power on the vehicle and pair your iPhone or Android device via Bluetooth to activate wireless CarPlay or Android Auto. Important: The factory microphone in PCM3.1-equipped Porsche models is integrated with the vehicle's SOS emergency system. This adapter includes a separate microphone to maintain hands-free calling functionality without disrupting the SOS system. Always use the supplied microphone. Upgrade Your Porsche's Connectivity Join over 12,300 satisfied customers who've transformed their driving experience with Victorious Automotive. Every order ships worldwide via DHL, FedEx, UPS or TNT — and is backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 🚚 Worldwide Shipping · DHL / FedEx / UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG, Apple Inc., or Google LLC. Apple CarPlay and Android Auto are trademarks of their respective owners. All product names and vehicle references are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase. Installation should be carried out by a qualified technician where appropriate.

Porsche · Cayman · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayman 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay, Android Auto, and full mirror-linking into your Porsche Cayman's factory PCM3.1 system — no head unit swap, no permanent modifications. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Plug & Play iOS 9+ Aluminium Housing 12V Siri Voice Control Overview The Porsche Cayman built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — capable for its era, but without the native smartphone integration that modern driving demands. Whether you're navigating unfamiliar roads, streaming music, or simply keeping your phone out of your hand, the absence of CarPlay is a daily frustration for many Cayman owners. This PCM3.1 Wireless Apple CarPlay Adapter is engineered specifically for Porsche's factory system architecture. It integrates directly into your existing head unit, retaining all original controls — steering wheel buttons, screen, and interface logic — while adding full wireless Apple CarPlay, Android Auto, and Android Mirror-linking capability. There is no requirement to replace your factory system or drill any new holes. Designed as a true plug-and-play solution, the adapter connects via the factory harness and communicates over CAN-Bus, meaning it works seamlessly with your car's electronics. Once paired, your iPhone connects automatically every time you get in — no cable, no fuss. Siri voice control, real-time navigation, hands-free calling, Spotify, Waze, and more are all available at a touch or a word. What's Included 📦 CarPlay Adapter Module PCM3.1-specific, aluminium housing 🔌 Wiring Harness Factory-matched CAN-Bus connection 🎙️ External Microphone Required — replaces factory SOS-integrated mic 📡 Bluetooth Antenna Enables wireless iPhone pairing 🔧 Mounting Hardware Including screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step printed instructions Product Highlights Wireless Apple CarPlay — iPhone connects automatically via Bluetooth, no cable required Wired CarPlay also supported for maximum stability when preferred Full Android Auto compatibility for Google Maps, Spotify, and more Android Mirror-linking to cast your Android screen to the factory display Retains all original steering wheel and dashboard button controls Siri voice control for completely hands-free operation while driving Supports aftermarket and OEM reverse or front camera integration Offline video and music playback via USB flash drive (up to 32GB) Airplay support for wireless HD video streaming from iOS devices Plug-and-play CAN-Bus integration — no permanent modifications to your Porsche Compatibility This adapter is designed for Porsche vehicles fitted with the PCM3.1 infotainment system. Compatibility requires a NAVI button on the control panel. Vehicles with a CD-AUX button only are not supported. Model Years System Fit Cayman 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit Boxster 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any model with CD-AUX only Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes Confirm your vehicle has a NAVI button on the PCM3.1 control panel before beginning installation. Power down the vehicle and remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Locate the factory harness connector on the rear of the head unit and connect the supplied wiring harness from the adapter module. Mount the adapter module in a suitable location behind the dashboard, ensuring adequate ventilation and no pinched cables. Route and connect the supplied external microphone to a discreet location on the A-pillar or sun visor area. Reinstall the head unit and trim panels, then power on the vehicle to verify the system initialises correctly. Pair your iPhone via Bluetooth — subsequent connections will be fully automatic and wireless. ⚠ Important: If your Porsche is equipped with Sirius Satellite Radio, additional mounting screws are required. Please notify us at the time of ordering and we will include them at no charge. The supplied external microphone must be used — the factory microphone cannot be retained due to its integration with the Porsche SOS emergency system. Upgrade Your Drive Your Porsche Cayman deserves a connected cockpit. This wireless CarPlay adapter brings modern smartphone integration to your PCM3.1 system without compromising the factory look or feel. Shop This Adapter Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model references, and trademarks are used for fitment identification purposes only. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended where required.

Porsche · Cayenne PCM3.1 · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayenne 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full mirror-linking to your Porsche PCM3.1 system — with zero permanent modifications and plug-and-play simplicity. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Hands-Free Calling iOS & Android Aluminium Housing Overview The Porsche Cayenne built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — a capable unit for its era, but one that was never designed for the smartphone-connected world we now live in. Navigation has moved on, streaming music is the norm, and hands-free communication is an expectation rather than a luxury. This adapter bridges that gap entirely. This PCM3.1 CarPlay retrofit module slots directly into your existing head unit via the Can-Bus interface, preserving your original steering wheel controls and factory buttons while unlocking wireless Apple CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. There's no cutting of wires, no permanent alterations, and no compromise to your vehicle's existing functionality — just a clean, professional upgrade that feels like it should have been there from day one. Whether you're routing through Waze, streaming Spotify, making a hands-free call via Siri, or monitoring a reversing camera feed, this adapter handles it all through the screen you already have. The aluminium housing keeps heat dissipation efficient, and with iOS 9 or above supported — including all current iPhone models — compatibility is essentially universal. What's Included 📦 CarPlay Adapter Module PCM3.1-specific retrofit box, aluminium housing 🔌 Can-Bus Interface Harness Plug-and-play vehicle connection loom 🎙️ Dedicated Microphone Included to preserve SOS/factory mic compatibility 📡 Wireless Bluetooth Receiver For wireless iPhone pairing without USB 🔧 Mounting Hardware Installation screws and fixings included 📋 Installation Guide Step-by-step instruction sheet Product Highlights Wireless Apple CarPlay — connect iPhone without a cable via Bluetooth pairing Wired Apple CarPlay also supported for stable, low-latency connection Android Auto compatible — full Google Maps, Assistant & media access Android screen mirroring for full device display on the factory screen Original steering wheel controls fully retained via Can-Bus integration Supports front and reverse aftermarket camera feeds Siri voice control for hands-free navigation, calls, and messaging Offline video and music playback via USB flash drive (up to 32GB) HD video streaming via Airplay and Android Mirror-Link Supports Sirius Satellite Radio vehicles — contact us for fitment screws Compatibility Model Years System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Vehicles with CD-AUX button (no NAVI) Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Fit Recommended Confirm your PCM head unit has a NAVI button on the control panel before beginning. If your vehicle only has a CD-AUX button, this product is not compatible. Remove the centre console trim panels to access the back of the PCM3.1 unit — refer to your vehicle-specific trim removal guide. Connect the Can-Bus interface harness from the adapter module to the corresponding port on the rear of the PCM3.1 unit. Route and connect the dedicated microphone to the adapter module, positioning it near the A-pillar or overhead console for best call quality. Secure the adapter module in a suitable location behind the dash using the included mounting hardware, ensuring adequate ventilation. Refit all trim panels, power on the vehicle, and follow the on-screen pairing instructions to connect your iPhone wirelessly via Bluetooth. ⚠ Important: If your vehicle is fitted with Sirius Satellite Radio, please contact us before installation. We will include the specific additional screws required to ensure a clean, secure fit. A dedicated microphone is included in the box as the factory microphone is integrated with the OEM SOS system and cannot be reused. Upgrade Your Porsche. No Compromise. Join over 12,300 verified customers who've transformed their driving experience with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop All Upgrades Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used for compatibility identification purposes only. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC. Always verify compatibility with your specific vehicle configuration before purchase.

Porsche · Boxster 2010–2016 · Infotainment Upgrade Wireless Apple CarPlay Adapter for Porsche Boxster 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full smartphone mirroring to your Porsche Boxster's factory PCM3.1 screen — no head unit replacement required. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Aluminium Housing Overview The Porsche Boxster is a driver's car in every sense — precise, communicative, and deeply rewarding. But for all its engineering brilliance, the PCM3.1 infotainment system found in 2010–2016 examples was never designed with modern smartphone integration in mind. Navigation felt dated, music playback was cumbersome, and hands-free calling was far from seamless. This Wireless Apple CarPlay adapter plugs directly into your Boxster's existing PCM3.1 architecture and unlocks a completely transformed in-car experience. Using your car's native display and original controls, you gain full access to wireless Apple CarPlay, wired CarPlay, Android Auto, and Android Mirroring — without touching your factory head unit or voiding your setup. Designed as a true plug-and-play module, the adapter communicates via CAN-Bus, preserving your steering wheel controls and original button layout. Installation requires no cutting or splicing — it simply slots into place, making it as clean as it is capable. Whether you're navigating via Waze, streaming Spotify, or simply taking a call hands-free with Siri, this adapter makes every drive measurably better. What's Included 📦 CarPlay Adapter Module PCM3.1 compatible, aluminium housing 🎙️ External Microphone Dedicated mic for hands-free calls 🔌 Wiring Harness Direct-fit CAN-Bus connector 🔩 Mounting Hardware Includes screws for Sirius Radio fitments 📄 Installation Guide Step-by-step fitment instructions Product Highlights Wireless Apple CarPlay — no cable needed once paired Wired Apple CarPlay also supported for stable connections Android Auto compatibility for Google-ecosystem users Android Mirroring to cast your phone screen directly Siri voice control for fully hands-free operation Original steering wheel controls remain fully functional Supports aftermarket front and reverse cameras Offline media playback via USB flash drive (up to 32GB) Airplay and Android Mirror-linking for HD video streaming Plug-and-play CAN-Bus integration — no head unit swap required Compatibility Model Years System Fitment Boxster 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Cayman 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any Porsche with CD-AUX button — Non-PCM3.1 Not Compatible Installation Notes Difficulty: Beginner — Estimated Time: 30–60 Minutes Confirm your Boxster's PCM system has a NAVI button on the control panel. If your car features a CD-AUX button instead, this adapter is not compatible — please contact us before ordering. If your vehicle has Sirius Satellite Radio installed, contact us prior to ordering — we will include the additional screws needed to accommodate this fitment. Remove the factory PCM3.1 unit following standard Porsche trim removal procedures (no cutting or permanent modification required). Connect the adapter's CAN-Bus harness to the factory wiring loom using the included plug-and-play connector. Route and secure the dedicated external microphone — this replaces the original mic, as the factory microphone is integrated with the SOS emergency system. Reassemble the trim, power on the system, and follow the on-screen pairing guide to connect your iPhone or Android device. ⚠ Important: A dedicated external microphone is included and must be used. The factory microphone is integrated into Porsche's SOS emergency system and cannot be repurposed for CarPlay calls without compromising that functionality. Upgrade Your Porsche. Drive Smarter. Victorious Automotive brings you premium in-car technology upgrades trusted by enthusiasts worldwide. Rated 4.9/5 stars from over 12,300 verified reviews — and backed by our 30-day money-back guarantee. Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx / UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All manufacturer names, model designations, and trademarks are used solely for fitment reference purposes. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC.

Victorious Automotive · Porsche PCM3.1 · Infotainment Upgrades Wireless Apple CarPlay Adapter for Porsche PCM3.1 — Cayenne, Macan, Panamera, 911 & More (2010–2016) Bring full wireless Apple CarPlay, Android Auto, and mirror-linking to your Porsche PCM3.1 system — plug-and-play fitment with no permanent modifications required. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Cayenne Macan Panamera 911 / 991 Boxster / 718 Cayman Plug & Play Siri Voice Control Overview Porsche's PCM3.1 infotainment system was an engineering benchmark when it launched, but a decade on, the absence of Apple CarPlay leaves it feeling dated against modern expectations. Navigation has moved on, streaming is standard, and seamless iPhone integration is now something drivers rightly expect from a car of this calibre. This Wireless Apple CarPlay Adapter is engineered specifically for Porsche PCM3.1-equipped vehicles built between 2010 and 2016. It slots cleanly behind the factory head unit and communicates via the existing CAN-Bus interface, meaning your original display, steering wheel controls, and physical buttons all continue to function exactly as Porsche intended — you simply gain a significant layer of modern connectivity on top. Whether you're connecting wirelessly over Bluetooth for CarPlay, mirroring your Android device, or connecting a front or reverse camera, this adapter handles it all without voiding the original system or leaving visible traces of the installation. It's the upgrade Porsche should have offered from the factory. What's Included 📦 CarPlay Adapter Module PCM3.1-specific hardware unit 🔌 CAN-Bus Harness Plug-and-play wiring loom 🎙️ External Microphone Replaces SOS-integrated OEM mic 📡 Bluetooth Antenna For wireless iPhone pairing 🔧 Installation Hardware Screws and mounting brackets 📄 Installation Guide Step-by-step instruction manual Product Highlights Wireless Apple CarPlay — connect your iPhone automatically without a cable Wired Apple CarPlay also supported via USB for added reliability Full Android Auto compatibility for Google Maps, Waze and more Android screen mirroring for multimedia and app streaming Original steering wheel controls fully retained and functional CAN-Bus integration preserves all factory PCM3.1 features Supports front and reverse aftermarket cameras Siri voice control for safe, hands-free iPhone interaction Hands-free calling with the included dedicated microphone USB flash drive playback for offline video and music libraries Compatibility Model Year Range System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit PCM3.1 with CD-AUX button Any PCM3.1 variant Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 60–90 minutes Confirm your PCM3.1 unit has a NAVI button on the control panel — this is required for activation. Units with only a CD-AUX button are not supported. Remove the factory head unit trim and carefully extract the PCM3.1 module to access the rear connectors. Connect the supplied CAN-Bus harness between the adapter module and the existing PCM3.1 wiring plugs. Route and secure the included external microphone to your preferred location on the A-pillar or overhead console. If your vehicle is equipped with Sirius Satellite Radio, contact us before installation — we will supply additional fixing screws to accommodate the alternate mounting arrangement. Reassemble the trim, power on the vehicle and follow the on-screen pairing prompt to connect your iPhone via Bluetooth. Important: The included external microphone must be used in place of the factory microphone. The original OEM microphone is integrated with the vehicle's SOS emergency system and cannot be shared with the CarPlay adapter. The supplied microphone replicates all hands-free calling functions independently. Upgrade Your Porsche Today Join over 12,300 satisfied owners who've transformed their driving experience with Victorious Automotive. Questions before you buy? Call our specialists on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop the Full Range Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx & UPS 🔁 30-day money-back guarantee 📞 Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used solely for fitment identification purposes. PCM is a registered trademark of Porsche AG.

Victorious Automotive · Range Rover Sport L320 & Discovery 4 L319 · Infotainment Apple CarPlay & Android Auto Head Unit — Range Rover Sport L320 & Discovery 4 L319 (2010–2016) A direct-fit Android multimedia unit bringing wireless CarPlay, Android Auto, built-in GPS navigation, and Hi-Fi audio to your Range Rover Sport or Discovery 4 — without altering the factory fascia. Range Rover Sport L320 Discovery 4 L319 / LR4 Apple CarPlay Android Auto 2010–2016 Double DIN 7" Touchscreen Android OS Built-in GPS Bluetooth Wi-Fi CAN-Bus Steering Wheel Control Overview The Range Rover Sport L320 and Discovery 4 L319 are two of Land Rover's most enduring platforms — purposeful, capable, and deeply characterful. But their factory infotainment systems, competent for their era, were never designed for a world of wireless smartphone integration, streaming audio, or real-time navigation. If you spend meaningful time behind the wheel, the cabin technology inevitably becomes the weak link in an otherwise excellent driving experience. This purpose-built double-DIN multimedia unit slots directly into the factory head unit position of both the L320 and L319, delivering a 7-inch 1024×600 capacitive touchscreen with Apple CarPlay and Android Auto as standard. Running on Android with 2GB RAM and 32GB ROM, it handles GPS navigation, Bluetooth audio, Wi-Fi streaming, FM radio, DVD/CD playback, and full multimedia formats — all within an interface that mirrors the layout your dashboard was designed around. CAN-Bus integration ensures the unit communicates natively with your vehicle's electronics, preserving steering wheel audio controls and maintaining a seamless factory feel. This isn't a generic aftermarket screen forced into place — it's a considered upgrade engineered specifically for these two Land Rover platforms. What's Included 🖥️ Head Unit 7" Android multimedia unit, double-DIN 🔌 Vehicle Wiring Harness Plug-and-play connector for L320 / L319 📡 GPS Antenna External antenna for reliable positioning 🎙️ External Microphone For hands-free calling clarity 📻 Radio Antenna Adapter Maintains factory FM/AM signal quality 🔧 Fitting Hardware Brackets and fixings for secure installation Product Highlights Apple CarPlay integration for seamless iPhone connectivity Android Auto support for Google Maps, Waze & more 7-inch capacitive touchscreen at 1024×600 resolution Android OS with 2GB RAM and 32GB internal storage Built-in GPS navigation with multi-language support Bluetooth audio streaming and hands-free calling Wi-Fi connectivity for app updates and streaming CAN-Bus support preserving steering wheel controls FM transmitter, radio tuner, and DVD/CD playback Multi-format support: MP3, MP4, WMA, JPEG and more Compatibility Vehicle Code Year Range Fit Range Rover Sport L320 2010–2013 Direct Fit Discovery 4 / LR4 L319 2010–2016 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Discovery 5 L462 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 1.5–3 Hours Disconnect the vehicle battery and allow the electrical system to discharge for at least 10 minutes before beginning work. Remove the factory centre console trim panels using appropriate trim removal tools to avoid scratching the surrounding fascia. Extract the original head unit by releasing the retaining clips or bolts — refer to your specific model's workshop manual for torque specifications. Connect the supplied vehicle-specific wiring harness to the new unit, matching colour-coded connectors. Attach the GPS antenna to a clear line-of-sight position on the dashboard. Route the external microphone to a discreet position near the driver's sun visor or A-pillar for optimal call quality. Slot the new head unit into the DIN cage, secure with the provided hardware, and reattach all trim panels. Reconnect the battery, power on the unit, and follow the on-screen setup wizard to configure language, GPS region, and CarPlay/Android Auto pairing. Verify steering wheel control functions via the CAN-Bus settings menu and calibrate if required. Important: This unit is slightly larger than the original factory head unit. Ensure adequate clearance behind the dashboard before final fitment. Professional installation is recommended if you are unfamiliar with automotive wiring or trim removal on Land Rover vehicles. Upgrade Your Cabin. Keep Your Character. Trusted by over 12,300 Land Rover and Range Rover owners worldwide, Victorious Automotive exists to help you get more from every drive — without compromise. Shop Range Rover Sport Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes.

Victorious Automotive · Land Rover / Range Rover · Interior Trim Chrome Volume & Air Conditioning Knob Covers – Land Rover Discovery 4 LR4 · Range Rover Sport L320 · Freelander 2 A set of five precision-fit chrome trim rings that restore a premium, tactile feel to your climate and audio controls — permanently eliminating the notorious sticky rubber degradation found on these generation Land Rovers. L320 Range Rover Sport Discovery 4 / LR4 Freelander 2 2005–2013 Chrome / Silver 5-Piece Set No-Drill Fit Interior Trim Climate Controls Volume Knob Why These Knobs Matter Owners of the Range Rover Sport L320, Discovery 4, and Freelander 2 will be well familiar with one of the most irritating age-related issues these vehicles develop: the soft-touch rubber coating applied to the climate control and audio volume knobs begins to degrade, leaving behind a persistently tacky, unpleasant surface that attracts grime and simply cannot be cleaned away. It is not a fault of neglect — it is a characteristic of the OEM rubber compound used across this era of Land Rover interiors, and virtually every example of sufficient age will eventually suffer from it. These chrome knob covers are engineered specifically to address exactly that problem. Designed to slip directly over the existing knobs on your centre console, they introduce a hard-wearing, chrome-finished surface that feels solid and premium underhand — a significant step up from the original tactile coating even before it degraded. The five-piece set covers all key rotary controls across the climate and audio panel, giving the cabin a cohesive, refreshed appearance. Rather than sourcing individual OEM replacement knobs at significant cost, or living with the stickiness indefinitely, this set offers a clean, cost-effective, and visually superior resolution. Once fitted, the transformation is immediate — both in feel and in the overall impression the interior makes. For owners who take pride in the condition of their vehicles, these covers represent one of the most satisfying and practical interior upgrades available for these models. What's Included 🎚️ Volume Control Cover Chrome ring for main audio volume rotary knob ❄️ Air Con Knob Covers × 4 Chrome trim rings for climate control rotaries 📦 Full 5-Piece Set Everything needed to refresh all rotary controls 🔧 No Additional Hardware Clip-over fit — no tools or adhesives required Product Highlights Directly resolves the sticky rubber degradation on OEM knobs Chrome silver finish — cohesive with brushed trim on these models Set of 5 covers all climate and audio rotary controls No drilling, cutting, or permanent modification required Hard-wearing surface — far more durable than original rubber Precision moulded for exact fitment on L320, LR4, and FL2 Instantly elevates the look and feel of the centre console Easy to clean — does not accumulate residue like OEM coating Reversible installation — original knobs remain intact beneath Fraction of the cost of OEM replacement knob assemblies Compatibility Vehicle Code Years Fit Range Rover Sport L320 2005–2013 Direct Fit Land Rover Discovery 4 / LR4 L319 2009–2016 Direct Fit Land Rover Freelander 2 L359 2006–2014 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible If your vehicle is not listed above or you are unsure of your specific build, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and turn off the ignition. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight — this makes the existing knobs easier to work with. If the OEM knobs are visibly sticky, wipe them down lightly with an isopropyl alcohol cloth and allow to dry fully. This ensures the chrome cover seats cleanly against the base knob. Align each chrome cover over its corresponding rotary knob. The covers are designed to push on with light, even pressure — do not force. You should feel a positive seat as the cover locates correctly. Work through all five knobs methodically, confirming each cover is level and centred before moving to the next. Test each control to confirm full rotation and normal function is maintained. No function should be impeded by the covers. Note: Do not use excessive force when seating the covers. If a cover feels misaligned, remove and re-seat rather than pressing harder. Ensure the base knobs are clean and dry before fitting — any residue may prevent a flush seating. Restore Your Interior. Right Now. The sticky knob problem is one of the most common complaints from owners of this generation of Land Rovers — and one of the easiest to solve. These chrome covers ship worldwide via DHL, FedEx, UPS, and TNT, and are backed by our 30-day money-back guarantee. Shop Range Rover Sport L320 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Tesla · Model 3 · Interior Trim Rear Seat Cup Slot Decorative Cover for Tesla Model 3 2017–2020 Refined carbon fiber styling for your Model 3's rear interior—premium ABS construction, factory-fit precision. Model 3 2017–2020 ABS Plastic Carbon Fiber Interior Trim Overview The Tesla Model 3 (2017–2020) deserves interior details that match its refined engineering. This rear seat cup slot decorative cover brings a touch of sophisticated styling to an often-overlooked area of your cabin—a subtle upgrade that elevates the entire interior aesthetic. Crafted from durable ABS plastic with a carbon fiber-style finish, this cover seamlessly replaces your factory cup holder slot cover with a sleeker, more contemporary look. Installation requires no tools or permanent modifications, making it an ideal accessory for owners who want premium detailing without complexity. Whether you're personalising your Model 3 for daily driving or preparing it for display, this decorative cover delivers factory-quality fitment and lasting durability. It's the kind of detail-focused upgrade that discerning owners appreciate. What's Included 🎨 Decorative Cover 1x carbon fiber rear cup slot cover 📋 Installation Guide Quick reference for fitment Product Highlights Carbon fiber-style finish for modern, premium appearance Direct fit—no modification required for Model 3 2017–2020 Premium ABS plastic construction resists fading and wear Tool-free installation in under five minutes Factory-quality fitment and sealing Enhances cabin refinement and visual cohesion Lightweight and impact-resistant material Colour-matched to original Tesla interior trim Compatible with all Model 3 configurations 2017–2020 Backed by quality assurance and 30-day guarantee Compatibility Model / Year Range Compatibility Tesla Model 3 (2017–2020) Direct Fit Tesla Model 3 (2021+) Not Compatible Model Y, S, X Not Compatible Before purchase: Verify your vehicle's model year (check door jamb plate or Tesla app). This cover is engineered exclusively for the 2017–2020 Model 3 generation. Installation Difficulty Level: Beginner | Time: 5 minutes Open rear doors and locate the cup holder slot cover in the centre armrest area. Gently lift and remove the existing factory cover by hand or with gentle prying. Clean the interior surface with a soft, dry cloth to remove dust or debris. Align the new decorative cover with the cup slot opening, ensuring tabs or clips match the receptacle. Press firmly until you hear or feel a click—cover should sit flush with surrounding trim. Close doors and inspect from multiple angles to confirm even fitment. Note: Do not force the cover into position. If resistance is felt, remove and recheck alignment. Forcing may damage the clip mechanism or trim. Elevate Your Model 3 Today Premium interior detailing that respects your vehicle's design and engineering. Factory-quality fitment, tool-free installation, and backed by our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Guarantee ✓ Worldwide Shipping ✓ 4.9/5 Stars – 12,300+ Reviews ✓ Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory supplier. We are not affiliated with, endorsed by, or connected to Tesla, Inc. or any official Tesla subsidiary. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility and personalisation only.

Victorious Automotive · Defender L663 · Exterior Accessories Wind Deflector Guard for Land Rover Defender L663 110 & 130 (2020–2026) A precision-engineered ABS wind deflector guard purpose-built for the Defender L663, reducing cabin turbulence and wind noise while keeping fresh air circulating — no drilling required. Defender L663 110 & 130 2020–2026 High-Quality ABS Direct Fit No Drilling Peel & Stick Install Window Vent Visor Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle built for those who demand capability without compromise — a reborn icon engineered for both serious off-road use and refined everyday driving. Whether you're running the 110 five-door or the long-wheelbase 130 with its expanded passenger configuration, the Defender's architecture benefits enormously from thoughtful exterior upgrades that enhance comfort without altering its purposeful character. These wind deflector guards are designed from the ground up to complement the angular, utilitarian bodywork of the L663. Manufactured from high-quality ABS (Acrylonitrile Butadiene Styrene), they integrate seamlessly into the window channel of each door, creating a low-profile aerodynamic barrier that deflects wind, rain, and road spray away from the cabin aperture. The result is noticeably reduced wind noise at motorway speeds, the ability to crack windows open during light rain without soaking the interior, and improved airflow management for a more pleasant driving environment. Unlike bulkier aftermarket visors, these deflectors keep a clean, factory-adjacent aesthetic that doesn't compromise the Defender's bold visual presence. The finish is carefully matched to suit the L663's window surround, and because the fitment is handled entirely via a peel-and-stick adhesive system, there is no requirement for drilling, cutting, or permanent modification to your vehicle. Installation is clean, reversible, and achievable in under thirty minutes on your driveway. What's Included 🪟 Front Left Deflector Driver-side window vent visor, pre-cut for L663 front door 🪟 Front Right Deflector Passenger-side window vent visor, pre-cut for L663 front door 🪟 Rear Left Deflector Rear driver-side visor, shaped for L663 rear door profile 🪟 Rear Right Deflector Rear passenger-side visor, shaped for L663 rear door profile 🔧 Adhesive Tape Strip Set Pre-applied 3M-grade double-sided tape on each deflector 📋 Installation Guide Step-by-step illustrated fitting instructions included Product Highlights Precision-cut for Land Rover Defender L663 110 and 130 body dimensions High-quality ABS construction — resistant to UV, heat, and impact Reduces wind noise and cabin turbulence at motorway speeds Allows windows to remain cracked open during light rain without water ingress Low-profile design preserves the Defender's bold, factory aesthetic No drilling, no cutting — fully non-invasive peel-and-stick installation Pre-applied 3M-grade adhesive tape for a secure, long-term bond Compatible with both standard and optional window glass configurations Improves interior ventilation, reducing reliance on air conditioning 100% brand new — supplied as a complete four-piece set for all main doors Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 130 L663 2020–2026 Long-Wheelbase SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Verify Before Purchase Defender 110 (Pre-2020) L316 Pre-2020 Classic Utility Not Compatible Range Rover Sport L461 / L494 Various 5-Door SUV Not Compatible Range Rover Vogue L460 / L405 Various 5-Door SUV Not Compatible Installation Notes ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Difficulty: Easy — No Tools Required Clean the window channel: Thoroughly clean the door frame and window surround with an isopropyl alcohol wipe. Remove all wax, polish, and dust residue. Allow to dry completely before proceeding. Dry-fit each deflector: Hold each deflector against the window channel without removing the tape backing. Confirm the profile aligns correctly with the door frame top rail before committing to placement. Peel and position: Remove the adhesive tape backing from the deflector. Starting at one end of the channel, carefully press the deflector into position, working gradually along its length to avoid bubbles or misalignment. Apply firm pressure: Once positioned, press firmly along the entire length of the deflector for 30–60 seconds to activate the adhesive bond. Pay particular attention to the ends and any curved sections. Cure time: Allow a minimum of 24 hours before operating the windows at high speed or washing the vehicle, to allow the adhesive to fully cure against the door surface. Repeat for all four doors: Follow the same process for each deflector in sequence — front left, front right, rear left, rear right — cross-referencing the fitting guide for any door-specific orientation notes. ⚠ Important: Do not attempt installation in temperatures below 5°C or in direct sunlight on a hot day, as extreme temperatures can affect adhesive performance. If your Defender has been previously fitted with aftermarket window tint or sealant near the channel area, clean thoroughly to ensure a clean bonding surface. If unsure about compatibility with your specific build variant, please contact our team before purchasing. Upgrade Your Defender L663 Today Every detail matters on a Defender. These wind deflector guards are a clean, functional upgrade that improves daily usability without compromising the vehicle's character. Browse our full range of Defender L663 exterior accessories and find everything your Land Rover deserves — all in one place. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Defender, L663, and Land Rover) are the property of their respective owners and are used solely for fitment identification and compatibility reference purposes. Please verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Defender L663 · Exterior Trim 4-Piece Stainless Steel Window Trim Set for Land Rover Defender 110 & 130 L663 (2020+) A precision-cut polished stainless steel window surround upgrade that refines the Defender's bold exterior with a clean, contemporary finish — no tools, no fuss. Defender L663 2020–2026 Stainless Steel Polished Silver 4-Piece Set Peel & Stick Corrosion Resistant Exterior Trim Overview The Land Rover Defender L663 is a vehicle that commands presence — an icon reborn with modern proportions, purposeful surfaces, and a design language that rewards the details. Whether you're running a 110 or a 130, the window line is one of the most defining visual elements of the body, and it's exactly where considered upgrades make the most impact. This 4-piece stainless steel window trim set is designed to slot directly into the window surround of the Defender 110 and 130 (2020 onwards), delivering a flush polished silver accent that bridges the gap between the Defender's utilitarian roots and its increasingly premium positioning. The trims are cut to mirror the exact geometry of the window apertures, sitting flat and seamlessly against the bodywork without gaps or misalignment. Constructed from high-grade stainless steel and finished with a mirror-polished surface, these trims offer genuine corrosion resistance alongside visual refinement — a combination that matters on a vehicle built to be driven in all conditions. Installation is handled via automotive-grade adhesive backing, requiring no drilling, no clips, and no professional tools. Clean the surface, align, press, and the job is done. What's Included 🪟 Window Trim Cover × 4 Polished stainless steel, adhesive-backed, pre-cut to fit 🔲 Adhesive Pre-Applied Automotive-grade 3M-style tape — ready to install out of the box 📋 Installation Guide Step-by-step instructions included for a clean application Product Highlights Precision-cut to match the Defender 110 & 130 L663 window profile exactly High-grade stainless steel construction — resistant to rust, oxidation and UV fade Mirror-polished silver finish elevates the exterior without altering the Defender's character Peel-and-stick installation — no tools, no drilling, no damage to bodywork Automotive-grade adhesive ensures a lasting, secure bond in all weather conditions Undergoes factory-level quality control testing before dispatch Flush fitment sits seamlessly against the window surround with no visible gaps Suitable for both daily drivers and Defenders kept to show standard Compatible with standard factory window trim on 2020-onwards Defender variants Lightweight design adds zero meaningful weight while delivering maximum visual impact Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Defender (Classic / Pre-2020) — Pre-2020 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Tools Required: None Thoroughly clean the window surround area using an isopropyl alcohol wipe or panel wipe solution. Remove all wax, grease, and residue. Allow to dry completely before proceeding. Dry-fit each trim piece to the window surround without removing the adhesive backing. Confirm alignment and note the exact positioning — take your time here to ensure a level, flush result. If ambient temperature is below 15°C, gently warm the adhesive backing and the panel surface with a heat gun or hair dryer. This significantly improves initial bond strength. Peel the adhesive backing from the first trim piece. Starting from one end, carefully align and press the trim against the window surround, working progressively to avoid air bubbles or misalignment. Apply firm, even pressure along the full length of the trim for a minimum of 60 seconds to activate the adhesive bond. Repeat for all four pieces. Allow the adhesive to cure fully for at least 24 hours before exposing the vehicle to rain, a car wash, or extreme temperatures. ⚠ Note: Ensure panel surfaces are completely dry and free of contaminants before application. Attempting to fit on a wet or waxed surface will significantly reduce adhesion. Professional installation is recommended if you are unsure about panel preparation. Complete Your Defender's Exterior These window trims are just the beginning. Explore the full Victorious range of exterior upgrades designed specifically for the Defender L663 — from door handle covers to bonnet trim and beyond. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and designations are used solely for fitment reference purposes. Compatibility is based on standard factory specification — vehicles with non-standard or modified window trim may require additional assessment prior to fitting.

Victorious Automotive · Range Rover Evoque L551 · Exterior Trim ABS Plastic Door Side Body Molding Cover Trim for Range Rover Evoque L551 (2019–2020) A precision-fit body side molding upgrade that sharpens the Evoque L551's exterior lines while shielding your doors from everyday scuffs and kerb strikes. Evoque L551 2019–2020 ABS Plastic Piano Black Silver Carbon Fibre Rose Gold Exterior Trim Tool-Free Fit 3M Adhesive Overview The second-generation Range Rover Evoque L551 arrived in 2019 as one of the most refined and design-forward compact SUVs in Land Rover's history. Its sculpted body, flush surfaces, and distinctive silhouette reward owners who pay attention to the details — which is exactly where these door side body molding cover trims come in. Engineered specifically for the 2019–2020 Evoque L551, these molding trims wrap the lower door edges in high-grade ABS plastic, delivering a factory-integrated appearance that protects the most vulnerable painted surfaces on your vehicle. Whether it's car park door dings, road debris, or general wear, these trims act as a first line of defence while simultaneously elevating the exterior aesthetic with clean, purposeful lines. Available in four distinct finishes — Piano Black, Silver, Carbon Fibre, and Rose Gold — there's an option to complement every Evoque specification, from the understated SE to the more expressive R-Dynamic variants. Each trim is produced under strict quality control to ensure consistent panel alignment, finish quality, and adhesive performance straight out of the box. What's Included 🚪 Full Door Trim Set Complete set covering all door panels for the L551 body 🔲 Pre-Applied 3M Adhesive Industrial-grade tape bonded to each trim piece at factory 📋 Installation Guide Step-by-step reference for clean, accurate fitment ✅ QC-Passed Components Each piece inspected before dispatch for finish and fit Product Highlights Precision-engineered exclusively for the Range Rover Evoque L551 2019–2020 body High-grade ABS plastic construction for lasting durability in all climates Four finish options: Piano Black, Silver, Carbon Fibre, Rose Gold Pre-applied industrial 3M adhesive backing for secure, tool-free installation Protects lower door panels from scuffs, kerb strikes, and road debris Slim, low-profile design that complements the Evoque's factory body lines UV-resistant surface coating to prevent fading and discolouration over time Strict factory quality control — each unit inspected before shipping 100% brand new — never refurbished or repackaged No drilling, cutting, or specialist tools required for installation Compatibility Model Code Year Range Fitment Range Rover Evoque (2nd Gen) L551 2019–2020 Direct Fit Range Rover Evoque (1st Gen) L538 2011–2018 Not Compatible Range Rover Evoque (2nd Gen Facelift) L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔧 Tools Required: None Thoroughly clean the installation area on each door panel using an isopropyl alcohol wipe, removing all wax, grease, and dust. Allow to dry completely before proceeding. Warm the pre-applied 3M adhesive strip on the reverse of each trim piece using a heat gun or hairdryer on a low setting for 15–20 seconds. This activates the adhesive for maximum bond strength, particularly important in cooler temperatures. Dry-fit each trim piece against the door panel without removing the adhesive backing. Confirm the alignment and profile match before committing to placement. Peel back the adhesive liner carefully and position the trim piece against the door, starting at one end and working progressively to avoid air pockets or misalignment. Apply firm, even pressure along the full length of each trim for at least 30 seconds to ensure full adhesive contact with the door surface. Allow a minimum of 24 hours before exposing the vehicle to water or washing. This curing period ensures a permanent, weather-resistant bond. ⚠ Important: Do not apply in direct sunlight or when panel surface temperature exceeds 40°C, as this can affect adhesive positioning. If you are uncertain about the installation process, professional fitting is recommended to ensure optimal results and preserve your vehicle's finish. Upgrade Your Evoque. The Right Way. At Victorious Automotive, every product we carry is selected with one standard in mind — worthy of a Range Rover. Explore our full collection of Evoque L551 exterior accessories and find everything your vehicle deserves. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, authorised by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used solely for the purpose of product compatibility identification and remain the intellectual property of their respective owners.