Range Rover Sport L494 MY13-20 Accessories

Victorious Automotive · Range Rover Sport L494 · Front Grille Silver & Black Front Upper Grille Upgrade — Range Rover Sport 2018–2022 A precision-fit ABS front grille replacement that instantly refreshes the face of your Range Rover Sport with a bold two-tone silver and black finish — no cutting, no specialist tools required. L494 · 2018–2022 Direct Fit ABS Plastic Silver & Black Upper Grille Exterior Styling Improved Airflow No Cutting Required Overview The Range Rover Sport L494, in its 2018–2022 facelift guise, already commands attention — but for owners who want to sharpen the front fascia and give their Sport a more distinctive, contemporary character, the factory grille often feels like an opportunity left on the table. This is where considered exterior upgrades make a genuine difference. This front upper radiator grille is engineered from high-quality ABS plastic and finished in a striking silver and black two-tone arrangement — echoing the design language of later Sport derivatives and giving the face of the vehicle a fresher, more aggressive presence. The silver surround provides visual contrast against the darker mesh, lifting the overall appearance without resorting to anything excessive or off-brand for the vehicle's premium character. Beyond aesthetics, the open-mesh design aids airflow to the radiator, contributing to more efficient heat management under the bonnet. Each unit passes strict quality control checks before leaving the factory, and the direct-fit design means installation is a clean swap — no modification to your existing bodywork required. What's Included 🔲 Front Upper Grille ABS construction, silver & black two-tone finish 🔩 Mounting Hardware Clips and fixings for secure fitment 📄 Fitment Reference Basic installation guide included Note: Land Rover badge / emblem is not included. Your existing badge can be transferred from the original grille. Product Highlights Direct OEM-position replacement — no cutting or modification required High-quality ABS plastic construction for durability and weather resistance Two-tone silver and black finish for a premium, contemporary appearance Open-mesh design promotes improved airflow to the engine radiator Strict factory QC testing on every unit prior to dispatch Designed specifically for the 2018–2022 Range Rover Sport L494 facelift Lightweight construction — no impact on vehicle performance or handling Existing Land Rover badge transfers directly from original grille Enhances kerb appeal and distinguishes your Sport from standard specification Straightforward home installation — suitable for confident DIY fitment Compatibility Vehicle Code Year Range Fitment Range Rover Sport Facelift L494 2018 – 2022 Direct Fit Range Rover Sport Pre-Facelift L494 2013 – 2017 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible If you are unsure whether this grille suits your specific build year or trim level, please contact our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 30–60 minutes Ensure the vehicle is parked on a flat surface with the engine fully cool before beginning work. Open the bonnet and locate the retaining clips and fasteners securing the original upper grille to the front bumper assembly. Carefully unclip and remove the factory grille from the front of the vehicle, working from the outer edges inward to avoid stressing the plastic tabs. If transferring your Land Rover badge, gently remove it from the original grille using a trim tool or heat gun at low setting to soften the adhesive. Align the new silver and black grille into the grille aperture, ensuring all mounting tabs are correctly seated before pressing firmly to engage the clips. Reattach any fasteners removed during disassembly and refit the badge to the new grille using the original adhesive or fresh double-sided tape. Visually inspect the fitment from the front of the vehicle to confirm even gaps on both sides before closing the bonnet. ⚠ Please Note: Always confirm your exact build year and specification before ordering. The 2018–2022 facelift L494 front bumper differs from the 2013–2017 pre-facelift. If in doubt, cross-reference your VIN or contact our team prior to purchase. Upgrade Your Range Rover Sport Today Explore our full collection of Range Rover Sport L494 exterior accessories — designed and curated specifically for discerning Sport owners who want more from their vehicle. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling All-Black Front Grille Upgrade — Range Rover Sport 2018–2022 A bold, blacked-out front end transformation for the Range Rover Sport L494 facelift — precision-moulded in high-impact ABS for a seamless, factory-quality finish. L494 Facelift 2018–2022 High-Impact ABS Gloss Black Direct Fit No Cutting Required Improved Airflow Exterior Styling Overview The Range Rover Sport L494 facelift — produced between 2018 and 2022 — is one of the most recognisable performance SUVs on the road. Its wide, commanding front end lends itself perfectly to a full blackout aesthetic, and the factory chrome grille, while handsome in its own right, is the single detail that holds many owners back from achieving that fully sinister look they're after. This all-black front upper radiator grille is engineered specifically for the 2018–2022 Range Rover Sport L494 facelift models. Moulded in high-impact ABS plastic with a deep gloss black finish, it replaces the factory unit with a clean, aggressive alternative that transforms the face of your Sport without touching a single other body panel. The mesh apertures maintain strong airflow to the radiator, so form and function are never compromised. The result is a cohesive, purposeful front end — particularly effective when combined with gloss black side vents or a black bonnet badge. Whether you're building an SVR-inspired look or simply want a cleaner, darker stance, this grille is one of the highest-impact, lowest-cost changes you can make to your Sport. What's Included 🔲 Upper Front Grille Full gloss black ABS unit, ready to fit 🔩 Mounting Clips OEM-style retention clips included 📄 Fitment Guide Basic installation reference included 🚫 Badge Not Included Existing grille badge transfers over Product Highlights Precision-moulded ABS construction for accurate panel gaps and fit Deep gloss black finish — consistent across the entire unit Direct replacement for the OEM upper front grille on L494 facelift Open mesh design maintains radiator airflow efficiency No drilling, cutting, or modification required for installation Lightweight yet rigid — resistant to flex and road vibration Strict factory QC testing on every unit before dispatch Complements black badging, black side vents, and SVR body kits Works with all trim levels of the 2018–2022 Sport facelift Significant visual impact for a fraction of a body shop cost Compatibility Vehicle Code Years Fitment Range Rover Sport (Facelift) L494 2018–2022 Direct Fit Range Rover Sport (Pre-Facelift) L494 2013–2017 Not Compatible Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  No Special Tools Required Open the bonnet and locate the upper grille retention clips along the top edge of the bumper assembly. Using a trim removal tool or flat-head screwdriver, carefully release the clips working from one side to the other — avoid forcing them to prevent bumper scuffs. Disconnect any wiring attached to the factory grille (if applicable — typically adaptive cruise sensor looms on certain trims). Remove the OEM grille fully and transfer your existing Range Rover badge from the original unit to the new grille. Align the new black grille into position, ensuring all apertures line up with the bumper surround correctly. Press the retention clips firmly into place, working from the centre outward until all clips are fully seated and the grille is secure. Reconnect any wiring looms disconnected in step 3, then close the bonnet and inspect the panel gaps from the front. Please Note: Always confirm your exact model year and facelift specification before ordering. The 2018 facelift introduced a revised front bumper design — pre-facelift L494 models use a different grille profile and this unit will not fit. If you're unsure of your variant, contact us on +44 203 943 9919 before purchasing. Upgrade Your Sport's Front End Today Join over 12,300 Range Rover and Land Rover owners who trust Victorious Automotive for premium styling upgrades. Worldwide shipping via DHL, FedEx, UPS and TNT — with a 30-day money-back guarantee on every order. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🌍 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔁 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or acting as a representative of Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Range Rover Sport L494 · Front Grille Silver Front Upper Radiator Grille Upgrade — Range Rover Sport 2018–2022 A direct-fit silver ABS grille replacement that instantly refreshes the front fascia of your Range Rover Sport L494, delivering a cleaner, more contemporary look with no permanent modifications required. Range Rover Sport L494 2018–2022 Silver Finish ABS Plastic Upper Radiator Grille Direct Fit No Drilling Required Facelift Model Overview The Range Rover Sport L494 facelift — produced from 2018 through 2022 — represents one of Land Rover's most assertive designs, with a bold front end that demands an equally considered grille. Whether your factory unit has aged, sustained minor damage, or you simply want to update the aesthetic, this silver upper radiator grille offers a compelling and cost-effective solution. Manufactured from high-grade ABS plastic and finished in a clean silver tone, this grille has been engineered to replicate the geometry and mounting points of the original Land Rover component. The result is a seamless fit that looks factory-correct from the moment it's in place — no fillers, no adapters, no guesswork. The open mesh construction also maintains proper airflow to the radiator, so there's no compromise on cooling performance. This upgrade is particularly well suited to owners looking to differentiate their Sport from the standard black grille specification, or those restoring a facelift model to a pristine front-end appearance. It's a straightforward modification that makes a disproportionately large visual impact — exactly the kind of considered upgrade Range Rover Sport owners appreciate. What's Included 🪟 Upper Radiator Grille Silver ABS, full front upper section 🔩 Mounting Clips Pre-fitted retention tabs for OEM-style fit 📋 Fitting Reference Basic installation guidance included Note: Land Rover badge / emblem is not included. Your original badge can be transferred from the factory grille. Product Highlights Precision-engineered for 2018–2022 Range Rover Sport L494 facelift models High-grade ABS plastic construction — lightweight yet durable Silver finish provides a clean, premium visual upgrade Open mesh design maintains full radiator airflow Direct OEM replacement — uses factory mounting points No drilling, cutting, or permanent modifications required Strict factory QC testing on every unit before dispatch Significantly more affordable than a dealer replacement part Original badge transfers directly from your existing grille Suitable for both personal builds and professional refits Compatibility Vehicle Code Years Fit Range Rover Sport Facelift L494 2018–2022 Direct Fit Range Rover Sport Pre-Facelift L494 2013–2017 Not Compatible Range Rover Sport New Gen L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible If you're unsure whether this grille is correct for your specific build year or trim level, call our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Beginner · Estimated Time: 30–60 Minutes · Tools Required: Trim removal tool, flathead screwdriver Park the vehicle on a flat surface and allow the engine to cool completely before working near the front fascia. Open the bonnet and locate the upper retaining clips securing the factory grille to the bumper surround — typically six to eight clips across the top edge. Using a plastic trim removal tool, carefully release each clip in sequence, working from the centre outward to avoid stressing the surrounding bumper trim. With the top clips released, gently pull the upper grille forward and away from the vehicle. It may also be retained by lower tabs — release these carefully before fully removing. If transferring your factory Land Rover badge, locate the retention pins on the reverse of the original grille and press them through to release the badge cleanly. Align the new silver grille in position, ensuring all mounting tabs locate correctly into the bumper surround. Press firmly and evenly along the top edge until all clips engage with an audible click. Fit the badge to the new grille using the existing aperture and retention system. Step back, inspect the panel gaps, and confirm a clean, even fit. ⚠ Important: Take your time releasing the factory clips — forcing them risks cracking the surrounding bumper trim. A plastic trim tool is strongly recommended over metal alternatives. If in doubt, consult a professional installer. Upgrade Your Range Rover Sport Today This silver grille is one of the simplest and most effective visual upgrades available for the 2018–2022 Range Rover Sport. Browse the full Sport L494 accessory range at Victorious, or get in touch with our team if you need guidance on fitment. Shop Range Rover Sport L494 → 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx, UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. All products are aftermarket components and are not OEM Land Rover parts.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Right-Hand Drive Carbon Fiber Interior Trim Set — Range Rover Sport L494 (2014–2020) Precision-cut real carbon fiber trim engineered exclusively for right-hand drive Range Rover Sport L494 models, delivering a factory-quality upgrade that transforms the cabin aesthetic with zero compromise. Range Rover Sport L494 RHD Specific 100% Real Carbon Fiber 2014–2020 Interior Trim Direct Fit No Drilling Required Adhesive Installation Overview The Range Rover Sport L494 is one of the most driver-focused vehicles Land Rover has ever produced — a vehicle that rewards those who take the details seriously. From the sculpted dash to the carefully considered console architecture, the Sport's interior is a space that responds exceptionally well to thoughtful enhancement. This carbon fiber trim set was developed with that philosophy in mind. Crafted from genuine woven carbon fiber — not vinyl wrap, not hydrographics — this trim delivers the authentic layered depth and structural rigidity that only real carbon fiber can offer. Each panel is precision-engineered to mirror the exact profile of the factory trim surface on right-hand drive models, ensuring seamless integration without any modification to your vehicle. Whether you're looking to complement an existing black pack specification or introduce a performance-inspired contrast to lighter interior tones, this set provides an immediate and unmistakable visual upgrade. The end result is a cabin that feels purposefully configured rather than accessorised — and that distinction matters to every Range Rover Sport owner who knows what they're looking at. What's Included 🪄 Carbon Fiber Passenger Trim Panel RHD-specific profile, pre-cut to factory dimensions 📦 Retail Packaging Brand new, unopened — protected for safe delivery 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style mounting tape included 📋 Installation Guide Step-by-step fitting reference included Product Highlights Constructed from 100% authentic woven carbon fiber — not vinyl or film Engineered specifically for right-hand drive L494 models — not a universal fit Lightweight construction adds zero meaningful weight to the interior UV-resistant clear coat finish prevents yellowing or fading over time Pre-applied automotive adhesive tape for a clean, tool-free installation Precision die-cut edges align flush with factory panel contours Compatible with all trim levels including SE, HSE, HST, SVR, and Autobiography Deep gloss finish enhances the layered weave pattern under any lighting Supplied brand new in protective retail packaging Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Code Year Range Drive Fitment Range Rover Sport L494 2014–2020 Right-Hand Drive (RHD) Direct Fit Range Rover Sport L494 2014–2020 Left-Hand Drive (LHD) Not Compatible Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 15–30 Minutes  |  Tools Required: None Thoroughly clean the factory trim surface using an isopropyl alcohol wipe to remove all dust, oils, and residue. Allow to dry completely before proceeding. Dry-fit the carbon fiber panel against the factory surface to confirm alignment and panel orientation before removing the adhesive backing. Peel back a small section of the adhesive tape backing and carefully position one edge of the trim panel against the factory surface. Gradually press the panel into place from one end to the other, applying firm and even pressure along the full surface to activate the adhesive bond. Run your thumb or a soft cloth firmly across the entire panel for 30–60 seconds to ensure full contact adhesion, paying particular attention to edges and corners. Allow the adhesive to cure at room temperature for a minimum of 24 hours before exposing the trim to moisture or temperature extremes. ⚠ Important: This trim is designed exclusively for right-hand drive Range Rover Sport L494 models (2014–2020). Installing on a left-hand drive vehicle will result in an incorrect fit. If your vehicle falls outside this specification, please contact our team before ordering. Upgrade Your Range Rover Sport Interior Browse our full Range Rover Sport L494 collection for matching carbon fiber panels, dashboard trim sets, and interior accessories — all engineered to the same standard. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of parts compatibility identification. This product is an aftermarket accessory and does not constitute an OEM or genuine Land Rover part.

Victorious Automotive · Range Rover L405 & L494 · Interior Upgrades 2018-Style Window Switch Upgrade Kit for Range Rover L405 & Sport L494 (2013–2017) Bring your pre-facelift Range Rover's interior into the modern era with a direct-fit 2018-style window switch set — no wiring, no cutting, no compromise. L405 2013–2017 L494 2013–2017 Direct Clip-On Fit Silver & Black Illuminated Buttons Push Button Switches Weather Resistant 4-Piece Set Overview The Range Rover L405 Vogue and Range Rover Sport L494 produced between 2013 and 2017 represent some of Land Rover's most accomplished vehicles — refined, capable, and effortlessly commanding on any road. Yet for owners who've spent time in a post-facelift 2018 model, one detail stands out immediately: the updated window switch panel. It's a small change that carries a noticeable visual weight, and it's exactly the kind of detail that separates a well-kept interior from one that's been truly elevated. This window switch upgrade kit delivers that 2018-onwards aesthetic to pre-facelift L405 and L494 owners without any permanent modification. The four-piece set replaces your existing door-mounted switch surrounds and buttons with the cleaner, more contemporary design introduced with the facelift — complete with illuminated black push buttons and a refined silver and black finish that feels native to the Range Rover interior. Engineered for a precise clip-on fit, this kit requires no drilling, no wiring changes, and no specialist tools. It preserves every function of your existing switches while delivering a meaningful visual upgrade to one of the most-used touchpoints in your cabin. Whether you're prepping for sale, refreshing a tired interior, or simply bringing your L405 or L494 in line with later-model aesthetics, this is one of the cleanest upgrades available at this price point. What's Included 🪟 Window Switch Set (×4) Full set of four door switches — driver, passenger, and rear pair 💡 Illuminated Black Buttons Built-in illumination on each switch for night-time visibility 📄 Installation Instructions Step-by-step guide included in the package Product Highlights Clip-on installation — no permanent modification to your vehicle 2018-style facelift aesthetic for pre-facelift 2013–2017 models Illuminated push buttons for clear night-time operation Silver and black dual-tone finish matches OEM interior palette High-quality materials with a durable, scratch-resistant surface Weather-resistant and corrosion-resistant construction Protects underlying switch surrounds from daily wear Full four-door coverage in a single kit Compatible with both L405 Vogue and L494 Sport platforms No tools required — installs in minutes per door Compatibility Model Platform Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Vogue L405 2018–2021 Not Required Range Rover Sport L494 2018–2022 Not Required Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 15–30 minutes  |  🛠 Tools Required: None Begin with the driver's door. Ensure your windows are fully closed and the ignition is off before starting. Gently prise the existing window switch panel from the door card using your fingers — no tools needed. Note the orientation of the existing switches. Align the new 2018-style switch unit over the existing switch housing, ensuring the button positions correspond correctly to the original layout. Press the new switch panel firmly into place until you hear and feel the clips engage on all four corners. Test each button to confirm all window functions operate correctly before moving to the next door. Repeat for the front passenger door and both rear doors using the appropriately sized switch units from the set. Once all four are fitted, cycle the ignition and verify illumination on all switches at night or in low light. ⚠ Important: Verify your exact model year and platform (L405 or L494) before purchasing. Switch panel designs can vary slightly between production runs. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility for your VIN. Elevate Every Detail At Victorious Automotive, we source accessories that respect your Range Rover as much as you do. This switch upgrade is the kind of quiet, considered improvement that owners notice every single day — and it takes under half an hour to fit. Shop More L405 & L494 Upgrades Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and platform references (including L405, L494, Range Rover, and Range Rover Sport) are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Range Rover Sport L494 Side Vents – Black Effect (2014–2017) Sharpen the flanks of your Sport with precision-moulded black ABS side vent inserts — a direct OE-style replacement that delivers an assertive, blacked-out finish with zero compromise on fitment. L494 2014–2017 High-Grade ABS Black Effect Finish Direct Fit Pair Included Exterior Styling No Drilling Required Overview The Range Rover Sport L494 is one of the most recognisable performance SUVs on the road — and the details matter. The factory side vent grilles are a defining feature of the Sport's character, framing the front quarter panels with an aggressive, purposeful stance. Over time, however, the original chrome or body-coloured inserts can appear dated, particularly if you're looking to bring a darker, more dynamic edge to the vehicle's exterior. These Side Vent Inserts in Black Effect are engineered specifically for the Range Rover Sport L494 2014–2017 model years. Moulded from high-quality ABS plastic, each piece is formed to match the exact geometry of the factory aperture — meaning no gaps, no misalignment, and no fuss. The black effect finish introduces a stealthy, cohesive aesthetic that pairs beautifully with both standard and SVR-inspired body styling. Supplied as a matched pair — one left and one right — these vents are a straightforward weekend upgrade that visually transforms the front quarter of your Sport without the need for specialist bodywork or permanent modification. For owners who want their L494 to look sharper, more focused, and unmistakably intentional, this is one of the most cost-effective exterior upgrades available. What's Included 🖤 Left Side Vent Insert Driver-side black ABS vent grille 🖤 Right Side Vent Insert Passenger-side black ABS vent grille Note: Fitting instructions are not included. Professional installation is recommended. Product Highlights Direct replacement for OE side vent grilles on L494 2014–2017 High-grade ABS construction for durability and UV resistance Black effect finish for a dark, aggressive aesthetic upgrade Precision-moulded geometry ensures exact aperture fitment Supplied as a complete pair — left and right included No drilling, cutting, or permanent modification required Consistent finish across both pieces for a factory-level appearance Lightweight construction — no impact on vehicle dynamics Ideal complement to gloss black or satin black styling packages 100% brand new — inspected to strict quality control standards Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2013 (Pre-facelift) Verify Before Ordering Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2022 Not Compatible Range Rover Velar L560 2017–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you're unsure about fitment for your specific build, call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm before you order. Installation Notes 🔧 Difficulty: Easy · Estimated Time: 30–60 Minutes · Tools Required: Trim removal tool, clean microfibre cloth Ensure the vehicle is parked on a level surface and the ignition is off. Allow the front bumper area to cool if the vehicle has been recently driven. Using a trim removal tool, carefully unclip the existing factory side vent grille from the front quarter panel aperture. Work slowly from one edge to avoid cracking the surrounding bumper trim. Clean the aperture recess thoroughly with a microfibre cloth to remove any dirt, wax residue, or moisture that could prevent the new vent from seating flush. Align the new black ABS vent insert into the aperture, ensuring the mounting tabs are correctly positioned before applying any pressure. Press firmly and evenly across the vent until all clips engage and the piece sits flush with the surrounding panel. Repeat for the opposite side. Step back and inspect both sides for alignment and consistency. No further fasteners or adhesive are required under normal fitting conditions. ⚠ Please Note: No fitting instructions are included with this product. If you are not confident working with exterior trim components, professional installation by a qualified automotive technician is strongly recommended. Incorrect removal of existing clips may cause damage to the surrounding bumper trim. Complete Your Sport's Look Browse our full Range Rover Sport L494 collection for grille upgrades, mirror covers, bonnet vents, and more — all designed to the same standard of precision fit and finish. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Range Rover Sport L494 Side Vents – Silver Effect (2014–2017) Refresh the flanks of your L494 Sport with precision-formed silver effect side vents — a direct OEM-replacement upgrade that adds visual depth and a contemporary finish without modification. L494 2014–2017 High-Grade ABS Silver Effect Finish Direct Fit Pair Included No Drilling Required Exterior Styling Overview The Range Rover Sport L494, produced between 2013 and 2020, established itself as one of the most dynamic and visually commanding SUVs in Land Rover's modern line-up. Its sculpted flanks and aggressive stance were designed to make an impression — and the side vents play a central role in that silhouette. Over time, original vents can fade, crack, or simply look dated against newer trim updates, making a quality replacement both a practical and aesthetic decision. These silver effect side vents are engineered as a direct, plug-and-play replacement for the factory items fitted to 2014–2017 L494 Sport models. Formed from high-grade ABS plastic, they replicate the OEM profile precisely while introducing a contemporary silver effect finish that lifts the exterior without altering the vehicle's fundamental character. The result is a cleaner, more purposeful look — exactly the kind of upgrade that complements rather than competes with the Sport's original design language. Unlike aftermarket panels that require cutting, drilling or professional bodywork, these vents are designed to clip directly into the existing mounting points on the driver's and passenger's sides. The fit is tight, the finish is consistent, and the visual payoff is immediate. Whether you're restoring a faded original or simply refreshing the look ahead of a season, this is a straightforward upgrade that makes a genuine difference. What's Included 🪟 Left Side Vent Driver's side — silver effect ABS 🪟 Right Side Vent Passenger's side — silver effect ABS 📦 Secure Packaging Protective box to prevent transit damage Product Highlights Direct OEM-replacement — clips into factory mounting points Silver effect finish adds a premium, contemporary look Supplied as a matched pair — left and right included Manufactured from high-grade ABS for durability Precise fitment profile replicates original vent geometry No drilling, cutting or permanent modification required Resistant to UV fading and everyday road exposure Consistent finish between both vents — colour-matched pair Lightweight construction — no added stress to bodywork Professional installation recommended for best results Compatibility Model Code Year Range Fitment Range Rover Sport L494 2014–2015 Direct Fit Range Rover Sport L494 2016–2017 Direct Fit Range Rover Sport L494 2018–2020 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 📋 Difficulty: Easy–Moderate  |  Estimated Time: 30–60 minutes  |  Tools: Trim removal tool, clean cloth Park on a flat surface and ensure the vehicle is clean around the side vent areas to avoid scratching surrounding bodywork during removal. Use a plastic trim removal tool to carefully release the clips securing the existing factory side vent — work from one edge to avoid snapping the retaining tabs. Gently pull the vent away from the body panel, taking care not to stress any surrounding trim or paintwork. Compare the removed vent with the new silver effect replacement to confirm profile and clip positions match before proceeding. Align the new vent to the mounting points and press firmly and evenly until each clip engages — you should hear or feel each one seat into place. Repeat the process for the opposite side, ensuring both vents sit flush and level against the body line. Step back and inspect both sides from a distance to confirm alignment and finish consistency before driving. ⚠ Please Note: No instruction sheet is included with this product. If you are not confident working with exterior trim removal, we recommend having these fitted by a professional detailer or bodywork specialist. Incorrect removal of the original vents can cause clip damage or minor paint scuffing if not approached carefully. Complete Your L494 Sport Explore our full Range Rover Sport L494 collection for matching exterior upgrades, interior enhancements and performance accessories — all selected with the same attention to fit and finish. Shop Range Rover Sport L494 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport · Exhaust & Styling SVR Style Exhaust Muffler Tips for Range Rover Sport — Stainless Steel Rear Tail Pipe Set Transform the rear end of your Range Rover Sport with SVR-inspired stainless steel exhaust muffler tips — a direct, no-paint upgrade that delivers factory-sport presence without factory-sport costs. Range Rover Sport SVR Body Kit Compatible Stainless Steel 304 2 Piece Set Rear Mounting 7.0cm Inlet Part No. MQL-202 Silver Finish Resistance Muffler Type 4KG Total Weight Overview The Range Rover Sport has always struck a rare balance between commanding road presence and genuine performance intent. Whether you're running the L494 or an earlier generation fitted with an SVR body kit, the rear of the vehicle is one of the most visible indicators of that sporting character — and the exhaust tips are central to that impression. Stock exhausts on non-SVR variants often appear understated by comparison, leaving the rear aesthetic feeling unfinished next to an otherwise purposeful body. These SVR Style Exhaust Muffler Tips are precision-formed from Grade 304 stainless steel, offering the aggressive quad-outlet visual language of the full SVR without any permanent modification to your vehicle. The polished silver finish catches light at every angle, complementing the Sport's bold shoulder lines and rear diffuser design. At 4KG total for the pair, they feel substantive and premium — not hollow or lightweight afterthoughts. Designed specifically for Land Rover models fitted with the SVR body kit, the tips feature a 7.0cm inlet diameter and rear mounting position, integrating cleanly with your existing exhaust system. No painting. No cutting. No specialist tools required — though professional fitting is always recommended for the cleanest result. These are a meaningful visual upgrade executed in the right material, for owners who know the difference. What's Included 🔧 Exhaust Muffler Tips × 2 Matched pair, stainless steel 304, silver polished finish 📦 Protective Packaging Securely boxed for international transit via DHL, FedEx, UPS or TNT 📋 Product Reference Card Part number MQL-202 for warranty and fitment reference Note: No printed installation guide is included. Professional installation is strongly recommended. Product Highlights Grade 304 stainless steel construction for lasting corrosion resistance SVR-inspired dual-outlet design per side — four tips total visual effect Polished silver finish — no painting required, ready to fit 7.0cm inlet diameter for a secure, rattle-free fit Resistant to UV, water, road salt, grease, oil and mild acids Lightweight relative to its solid feel — just 4KG for the full pair Rear mounting position matches OEM SVR exhaust outlet placement No permanent modification to your exhaust system required Compatible with Range Rover Sport models fitted with SVR body kit Adds a genuine sporty presence without aggressive or over-styled aesthetics Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Sport with SVR Body Kit L494 2013–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Sport with SVR Body Kit L461 2022–2026 Verify Fitment Range Rover Sport (Standard — No SVR Kit) L494 / L461 All Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Land Rover Defender L663 L663 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Not Compatible These tips are designed for vehicles fitted with the SVR body kit. If you're unsure whether your vehicle qualifies, contact us on +44 203 943 9919 before ordering. Installation Notes 🔩 Installation Overview Difficulty: Moderate  |  Estimated Time: 45–90 minutes  |  Tools: Basic hand tools, hose clamps or exhaust clamps Ensure the vehicle is parked on a flat surface and the exhaust system has fully cooled before beginning work. Measure your existing exhaust pipe outlet diameter to confirm compatibility with the 7.0cm inlet size of these tips. Clean the rear exhaust pipe ends thoroughly, removing any carbon build-up, rust or debris that could prevent a secure fit. Slide each muffler tip over the corresponding exhaust outlet, positioning it so the face of the tip aligns flush with the rear bumper cutout. Secure each tip using appropriate exhaust clamps, tightening evenly to prevent any lateral movement or vibration noise. Start the vehicle and allow it to idle for a few minutes. Inspect for any movement, rattling or exhaust leaks around the inlet joint. Once satisfied, give the tips a final wipe down with a microfibre cloth to remove any fingerprints before the steel fully heats and sets. ⚠ Important: No installation guide is included with this product. Professional installation is strongly recommended. Incorrect fitting may result in noise, vibration or damage to the exhaust system. Always allow exhaust components to fully cool before handling. Built for Range Rover Sport Owners Who Don't Compromise These SVR style exhaust tips are one of the most cost-effective ways to complete the rear styling of your Range Rover Sport. Explore our full collection of Range Rover Sport accessories — or call our team if you'd like personalised fitment advice. Shop Range Rover Sport L494 Accessories Shop Range Rover Sport L461 Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 5 & Range Rover · Exterior Trim Carbon Fiber Door Handle Covers for 2017–2021 Land Rover Discovery 5 & Range Rover A precision-fit carbon fiber upgrade that transforms your door handles into a visual focal point — no paint, no professional fitting, no compromise. Discovery 5 L462 Range Rover L405 2017–2021 Real Carbon Fiber 3M Adhesive Fit UV Resistant Set of 4–8 No Drilling Overview The 2017–2021 Land Rover Discovery 5 and Range Rover are vehicles built with a clear design language — commanding, considered, and refined. The door handles, while functional, are one of the few exterior details that benefit most from a well-chosen upgrade. These carbon fiber door handle covers are engineered specifically for that purpose: to close the gap between factory specification and the kind of finish that turns heads at a standstill. Each cover is crafted from genuine carbon fiber with a high-gloss lacquer finish, capturing the distinctive woven texture that carbon fibre enthusiasts expect. Lightweight by nature yet rigid under daily use, the material resists UV degradation, moisture ingress, and the kind of road debris that dulls lesser finishes over time. The result is a component that looks purposeful and performs quietly — exactly how a Land Rover owner prefers it. Fitment is handled via pre-applied 3M automotive-grade adhesive tape, meaning the entire installation process takes place on your driveway without tools, specialists, or risk to your vehicle's paintwork. Whether you're refining a daily driver or building a specification-level Discovery 5, these covers deliver a noticeable visual step-up with minimal effort required. What's Included 🪶 Carbon Fiber Door Handle Covers Set of 4–8 covers depending on configuration; genuine carbon fiber with gloss lacquer 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade 3M tape bonded to each cover for a clean, tool-free installation 📄 Installation Guide Step-by-step instructions for a professional finish from first attempt 🧹 Surface Prep Wipe Included cleaning wipe to degrease door handle surfaces prior to fitting Product Highlights Genuine carbon fiber construction — not ABS with carbon-look wrap High-gloss lacquer protects the weave and adds depth to the finish UV-resistant coating prevents fading, yellowing, or surface degradation Waterproof and resistant to road grime, bird lime, and light impacts Lightweight profile adds no meaningful weight to your door panels No drilling, cutting, or modification to your vehicle required 3M automotive adhesive provides a permanent, weather-proof bond Precision-moulded to follow the exact contour of Discovery 5 handles Compatible with both 4-door and extended configurations as applicable Brand new — supplied in protective packaging, ready to install Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2022 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 / L551 2011–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your vehicle in a dry, sheltered environment. A garage or covered driveway is ideal — avoid fitting in direct sunlight or cold temperatures below 10°C as this affects adhesive performance. Thoroughly clean each door handle with the included prep wipe, removing all grease, wax, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit each carbon fiber cover to its corresponding handle to confirm alignment and coverage. Each cover is shaped to a specific position — take a moment to familiarise yourself before committing. Peel the backing from the 3M adhesive tape on the underside of the first cover. Align the cover carefully to the handle, press firmly from the centre outward, and hold for 30–60 seconds to activate the bond. Repeat for all remaining covers. Do not wash the vehicle or expose the adhesive to water for at least 24 hours following installation to allow full cure. ⚠ Important: Confirm your exact vehicle variant and year of manufacture before ordering. Handle profiles can vary between model years and trim levels. If you are unsure of compatibility, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Upgrade Your Discovery or Range Rover Today Join over 12,300 verified Land Rover and Range Rover owners who trust Victorious Automotive for premium exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purposes of fitment identification. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Red Carbon Fiber Dashboard Trim for Range Rover Sport L494 (2014–2019) — Left Hand Drive A bold, driver-focused interior upgrade crafted from real carbon fiber — adding striking visual depth to the Range Rover Sport L494 dashboard without a single tool required. Range Rover Sport L494 2014–2019 Left Hand Drive Real Carbon Fiber Red Finish Dashboard Trim Peel & Stick Interior Upgrade Overview The Range Rover Sport L494 was engineered to deliver a dynamic driving experience — a vehicle that sits at the intersection of genuine off-road capability and premium performance. Its interior, while refined from the factory, is a canvas that rewards thoughtful personalisation. This red carbon fiber dashboard trim is designed for drivers who want their Sport to reflect the same intensity behind the wheel as it delivers on the road. Constructed from 100% real carbon fiber, this trim piece brings genuine material quality to your dashboard. The woven carbon weave is finished in a deep, lacquered red that catches light with a richness you simply cannot replicate with vinyl wraps or ABS plastic alternatives. The result is an interior accent that feels purposeful and considered — not an afterthought. Engineered specifically for left-hand drive variants of the L494 Sport between 2014 and 2019, every contour and mounting point is matched precisely to the OEM dashboard geometry. Installation requires no drilling, cutting, or professional modification — the trim uses a high-strength automotive-grade 3M adhesive backing that bonds cleanly and removes without residue if needed. It's the kind of upgrade that takes minutes to fit but looks like it was always there. What's Included 🧩 Carbon Fiber Dashboard Trim 1× red carbon fiber trim panel, pre-cut for L494 LHD fitment 📋 Installation Guide Step-by-step printed instructions for a clean, confident fit 🧼 Surface Prep Wipe Alcohol cleaning wipe for optimal adhesion before application 📦 Protective Packaging Rigid foam-lined box to ensure zero transit damage Product Highlights 100% real carbon fiber construction — not plastic, not vinyl, not ABS Bold red lacquered finish with deep woven texture visible under all lighting conditions Precision-cut for the Range Rover Sport L494 left-hand drive dashboard geometry Automotive-grade 3M adhesive backing — no tools, no drilling, no modifications required Lightweight material adds no meaningful weight to the vehicle interior Resistant to UV fading, heat distortion, and everyday interior wear OEM-level surface finish with smooth edges and consistent lacquer depth Removable without surface damage — ideal for leased vehicles Compatible with factory dashboard surfaces including matte, gloss, and wood veneer trims Pairs cleanly with other Victorious carbon fiber interior accessories for a unified look Compatibility Vehicle Code Years Drive Fitment Range Rover Sport L494 2014–2019 Left Hand Drive Direct Fit Range Rover Sport L494 2014–2019 Right Hand Drive Not Compatible Range Rover Sport L494 2013 (Pre-facelift) LHD / RHD Not Compatible Range Rover Sport L461 2022–2026 LHD / RHD Not Compatible Range Rover Vogue L405 2013–2020 LHD / RHD Not Compatible Range Rover Velar L560 2018–2022 LHD / RHD Not Compatible Defender L663 2020–2026 LHD / RHD Not Compatible Installation Notes ⏱ Estimated Time: 15–25 minutes  |  🔧 Difficulty: Beginner-Friendly Confirm your vehicle is a left-hand drive Range Rover Sport L494 manufactured between 2014 and 2019 before proceeding. Park in a clean, dry environment with the cabin at room temperature. Avoid installation in cold or damp conditions, as this can reduce adhesive performance. Use the included alcohol wipe to thoroughly clean the target dashboard surface. Remove any dust, grease, or silicone residue. Allow to dry completely — approximately 2 minutes. Dry-fit the trim panel against the dashboard to confirm alignment and panel coverage before removing the adhesive backing. Peel back approximately one-third of the adhesive liner. Align one edge carefully with the panel boundary, then slowly press the trim into place while peeling the remaining liner. Apply firm, even pressure across the full surface using your thumb or a soft cloth for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 2 hours before exposing the trim to heat or direct sunlight to allow the adhesive to fully cure. ⚠ Important: This trim is designed exclusively for left-hand drive L494 models. Attempting to fit this piece to a right-hand drive vehicle will result in incorrect alignment. If you are unsure of your vehicle's drive configuration, check the VIN plate or your vehicle registration document before ordering. Built for Range Rover Sport Owners Who Demand More Every piece in the Victorious collection is selected for fit, material quality, and long-term durability. If you're upgrading the Sport L494, explore our full range of L494 interior accessories — or speak with our team directly on +44 203 943 9919 (Mon–Fri, 9am–7pm). Shop Range Rover Sport L494 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Sport L494 & Vogue L405 · Interior Accessories Illuminated Door Sill Scuff Plates for Range Rover Sport L494 & Vogue L405 (2014–2019) LED-lit door sill protection that guards against everyday entry scuffs while casting a refined ambient glow across your cabin threshold — day and night. Range Rover Sport L494 Range Rover Vogue L405 2014–2019 LED Illuminated Set of 4 Direct Fit Scuff Protection Interior Upgrade Overview The Range Rover Sport L494 and Vogue L405 occupy a rare space — vehicles that balance genuine performance capability with boardroom-level interior refinement. Every detail inside the cabin is deliberate, and the door sills are no exception. They're one of the first surfaces your eye falls on when entering, and one of the first areas to show wear from repeated foot contact. Protecting them — and elevating them — simply makes sense. These Illuminated Door Sill Scuff Plates are engineered specifically for 2014–2019 Sport L494 and Vogue L405 models, integrating directly with your vehicle's existing electrical system to deliver crisp LED illumination across each sill panel. The result is a premium ambient effect that activates on door open, casting a subtle glow across the entry point and adding a layer of sophistication that complements the Range Rover's interior character without overpowering it. Beyond aesthetics, the primary function of these plates is protective. The brushed finish panels sit flush over the factory sill area, absorbing scuffs and scratches from footwear that would otherwise mark or chip the painted or lacquered trim beneath. It's a functional upgrade with a visual payoff — exactly the kind of considered modification that Range Rover owners tend to appreciate. What's Included 💡 4× Illuminated Scuff Plates Front and rear sill plates, LED-equipped, set of four 🔌 Wiring Loom & Connectors Pre-terminated harness for clean integration 🔩 Fitting Hardware All fixings and adhesive clips included 📄 Installation Instructions Step-by-step guide included in the box Product Highlights Precision-designed for Range Rover Sport L494 and Vogue L405 door sill profiles LED illumination activates automatically on door open for immediate ambient effect Protects factory sill trim from scratches, scuffs, and paint chipping Integrated lettering adds a model-specific premium visual identity Improves nighttime cabin entry visibility without harsh interior lighting Energy-efficient LED technology draws minimal current from vehicle electrics Robust construction built to withstand daily use and weather exposure Flush-fit design maintains the factory aesthetic — no gaps or proud edges Full set of four covers all door entry points front and rear Reversible installation — no permanent modification to the vehicle required Compatibility Model Code Year Range Fitment Range Rover Sport L494 2014–2019 Direct Fit Range Rover Vogue L405 2014–2019 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Sport L320 Pre-2014 Not Compatible Unsure of your exact model code? Check your VIN plate or call us on +44 203 943 9919 and we'll confirm fitment before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Panel pry tools, trim clips, basic wiring knowledge Open all four doors and carefully remove the existing factory door sill trim panels using a trim pry tool — work slowly from each corner to avoid clip damage. Clean the exposed sill surface thoroughly with an isopropyl alcohol wipe to ensure adhesive backing bonds correctly. Route the pre-terminated wiring loom from each sill position toward the door jamb, connecting into the vehicle's door-trigger circuit using the supplied connectors. Press each illuminated scuff plate firmly into position, aligning the panel with the factory mounting points and engaging all clips evenly along the length. Test each LED panel by opening the corresponding door before refitting any surrounding trim. Confirm consistent illumination across all four plates. Refit all door jamb and surrounding trim pieces, ensuring all clips are fully engaged and panels sit flush with no gaps. ⚠ Note: Professional installation is recommended if you are unfamiliar with automotive wiring or interior trim removal. Incorrect wiring connections may affect vehicle electrics. Always disconnect the vehicle battery before working with any electrical components. Elevate Every Entry The door sill is the first thing you see when you open the door — and the first surface to take a beating. These illuminated plates protect what matters while adding a finishing touch that makes your Sport or Vogue feel exactly as special as it should. Shop the full range of interior accessories for your L494 or L405 below. Shop Range Rover Sport L494 Accessories Shop Range Rover Vogue L405 Accessories Buying two items? Use code 22GET20 for 20% off your order. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Real Carbon Fiber Center Console AC Panel Frame Cover Trim for Range Rover Sport L494 (2014–2017) Elevate the heart of your Sport's cabin with a genuine woven carbon fiber AC panel trim that replaces OEM plastic with precision-cut motorsport-grade material. Range Rover Sport L494 2014–2017 Real Carbon Fiber Center Console Trim AC Panel Frame Interior Upgrade Direct Fit No Drilling Required Overview The Range Rover Sport L494 is already one of the most visually compelling SUVs ever produced — a vehicle that walks the line between refined luxury and genuine performance intent. But even factory interiors have their limitations. The centre console AC panel area, with its expanse of moulded plastic, is one of the few zones where the Sport's interior falls short of the visual drama its exterior promises. This real carbon fiber center console AC panel frame cover trim is engineered specifically for the 2014 to 2017 Range Rover Sport L494. It's not a vinyl wrap, a hydrographic print, or an ABS overlay mimicking carbon — this is genuine woven carbon fiber composite, with the tactile depth, structural rigidity, and visual authenticity that only the real material delivers. The tight 2×2 twill weave pattern catches light dynamically, shifting in tone from charcoal black to rich graphite depending on the angle, giving your Sport's interior a finish you'd expect to see in a motorsport paddock rather than a showroom floor. Installation is straightforward and tool-free. The trim uses a precision-engineered adhesive backing designed for long-term bond strength on automotive surfaces — no drilling, no modification, and no risk to your OEM panel. The result is a transformation that looks factory-fitted and feels completely at home in the Sport's performance-forward cabin character. What's Included 🪄 Carbon Fiber AC Panel Trim 1× center console AC panel frame cover — genuine woven carbon fiber composite 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style backing, pre-applied and ready to bond 🧹 Alcohol Prep Wipe For surface degreasing before installation 📋 Installation Guide Step-by-step fitting instructions included in the box Product Highlights Genuine woven carbon fiber composite — not vinyl, not ABS, not hydrographic print Precision-cut to match the OEM AC panel frame dimensions of the L494 Sport exactly 2×2 twill weave pattern for classic motorsport aesthetic and visual depth Lightweight yet structurally rigid — adds no meaningful weight to the interior High-gloss UV-resistant clear coat finish protects against fading and surface wear Tool-free installation using pre-applied automotive-grade adhesive backing No drilling, cutting, or modification to OEM components required Fully reversible — original panel remains undamaged beneath the trim Compatible with all trim levels and engine variants of the 2014–2017 Sport L494 Seamlessly complements other carbon fiber interior accessories for a cohesive finish Compatibility Model Code Year Range Trim Level Fit Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, SVR, Autobiography Direct Fit Range Rover Sport L494 2018–2022 (facelift) All Variants Verify Before Purchase Range Rover Sport L461 2022–2026 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Range Rover Defender L663 2020–2026 All Variants Not Compatible Range Rover Velar L560 2018–2022 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–25 Minutes  ·  🔩 Tools Required: None Park your Range Rover Sport on a level surface and ensure the cabin has reached ambient temperature — avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Use the included alcohol prep wipe to thoroughly clean the OEM AC panel frame surface, removing all dust, grease, fingerprints, and polish residue. Allow the surface to dry completely for at least 2–3 minutes. Dry-fit the carbon fiber trim piece against the panel to confirm alignment and confirm the piece seats flush and level across all edges before committing to the adhesive bond. Carefully peel back the adhesive liner from the rear of the trim, taking care not to touch the adhesive surface with your fingers. Position the trim at the top edge of the panel and press firmly downward, applying sustained pressure across the full surface for 30–45 seconds to activate the adhesive bond. Allow the trim to cure for a minimum of 24 hours before exposing to moisture, cleaning products, or temperature extremes. The bond will reach full strength within 48–72 hours. ⚠ Important: Do not attempt to remove or reposition the trim once the adhesive has made contact with the panel surface. Premature repositioning will compromise bond strength. If you are unsure about fitment, dry-fit thoroughly and use low-tack masking tape as a guide marker before removing the adhesive liner. Upgrade Your Sport's Interior Today Explore our full Range Rover Sport L494 collection for coordinating carbon fiber interior trim, exterior accessories, and more — curated for owners who refuse to compromise on detail. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment compatibility identification and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Protection Front & Rear Bumper Guard Protection Plates for Range Rover Sport L494 (2018–2021) Precision-laser-cut stainless steel bumper guard plates engineered to shield the front and rear bumpers of your 2018–2021 Range Rover Sport from road debris, scratches, and daily wear — without compromising its commanding aesthetic. Range Rover Sport L494 2018–2021 Stainless Steel Front & Rear Drill-Free Fitment Laser Cut Exterior Protection Direct Bolt-On Overview The 2018–2021 Range Rover Sport L494 is one of the most visually assertive SUVs on the road — a vehicle that earns its presence whether navigating city streets or covering open terrain. Its low-slung bumper lines and sculpted lower body panels are defining design features, but they're also among the most exposed surfaces to stone chips, kerb contact, grit, and trailing debris. Over time, even minor accumulation of wear on these areas begins to undermine the confidence the Sport is designed to project. These Front and Rear Bumper Guard Protection Plates are designed specifically for the L494 Sport's 2018–2021 facelift generation, using precision laser-cutting to match the exact contours of the bumper's lower face. Manufactured from high-grade stainless steel, each plate delivers genuine structural defence against mud, gravel, and road debris — acting as a sacrificial shield between the elements and your original paintwork. Unlike generic universal guards, these plates integrate flush with the bumper line, maintaining the Sport's purposeful silhouette rather than disrupting it. Installation requires no drilling, no cutting, and no specialist tools. The plates bolt directly onto existing mounting points using the hardware provided, meaning fitment is clean, reversible, and achievable at home in under an hour. For owners who refuse to let daily mileage take the edge off a vehicle they've invested in, these plates are a straightforward, high-quality solution. What's Included 🛡️ Front Bumper Guard Plate Laser-cut stainless steel, L494 Sport fitment 🛡️ Rear Bumper Guard Plate Matched pair, same material and finish 🔩 Mounting Hardware All fixings required for direct bolt-on installation 📄 Installation Instructions Step-by-step fitment guide included Product Highlights Precision laser-cut for exact flush fit on the L494 Sport bumper profile High-grade stainless steel construction resists corrosion and impact Covers both front and rear bumper lower sections in one package Protects original paintwork from stone chips, grit, and debris Drill-free, direct bolt-on installation onto OEM mounting points No special tools required — achievable with standard home equipment Reversible fitment — fully removable without leaving permanent marks Maintains the Sport's factory aesthetic without visual compromise Designed specifically for the 2018–2021 L494 facelift generation Enhances the purposeful, rugged stance of the Range Rover Sport Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L494 (Facelift) 2018–2021 Direct Fit Range Rover Sport L494 (Pre-Facelift) 2013–2017 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: Basic hand tools only Ensure the vehicle is parked on a flat, stable surface and the ignition is off. Allow the bumper area to cool if the vehicle has been recently driven. Clean the front and rear bumper lower surfaces thoroughly with a dry microfibre cloth to remove any dirt, grease, or moisture that could affect fitment alignment. Locate the existing OEM mounting points on the lower bumper — these are the anchor positions the guard plates are designed to align with directly. Offer up the front guard plate to the bumper, aligning the pre-drilled holes with the OEM mounting points. Confirm flush contact across the full width before securing. Hand-tighten the provided fixings first to confirm alignment, then tighten to the recommended torque using the included hardware. Do not over-tighten stainless steel fixings. Repeat the same process for the rear bumper guard plate, ensuring equal gap consistency along the lower edge. Step back and visually inspect both plates for level fitment and symmetry. Wipe down with a clean cloth to remove any fingerprints before driving. ⚠ Important: Confirm your exact model year is 2018–2021 L494 before installation. The facelift and pre-facelift L494 bumpers differ in profile. Fitting to an incompatible year may result in poor alignment or gaps. If in doubt, contact us before proceeding. Built for Range Rover Sport Owners Who Demand More At Victorious Automotive, every accessory we carry is selected for owners who take their vehicle seriously. These bumper guard plates are a practical investment in preserving the condition and appearance of your 2018–2021 Range Rover Sport L494 — one that pays for itself the first time it deflects a stone chip that would have gone straight to bare metal. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Range Rover, Range Rover Sport, and L494 — are the property of their respective owners and are used solely for the purpose of fitment identification and compatibility reference.

Victorious Automotive · Interior Upgrades · Gear Shift Knob Crystal Gear Shift Knob for Range Rover Sport, Evoque & Discovery Sport (2014–2022) A polished crystal-finish gear shift knob that transforms the tactile centrepiece of your cabin into something genuinely refined — a direct-fit upgrade requiring zero modification. Range Rover Sport L494 Evoque L551 Discovery Sport 2014–2022 Crystal Finish Direct Fit No Modification Interior Upgrade Overview The Range Rover Sport, Evoque, and Discovery Sport each occupy a confident place in the Land Rover lineup — vehicles built for those who want genuine capability wrapped in genuine sophistication. Their interiors reflect that ambition, but even the most considered factory cabin has points where an owner can push things further. The gear selector is one of them. This crystal-finish gear shift knob is designed specifically for the ZF 8-speed automatic transmission setup found across these three platforms. Where the standard leather or textured knob is functional and presentable, this upgrade elevates the selector into something that feels intentional — a faceted, gemstone-like finish that catches ambient light and draws the eye without demanding it. It sits flush, feels substantial in hand, and reads as factory in the best possible way. For the owner who has already addressed the floor mats, the ambient lighting, and the seat covers, this is the detail that completes the centre console. Installation is a tool-free process that takes under ten minutes, with no permanent alteration to any factory component. What's Included 💎 Crystal Gear Shift Knob 1× direct-fit shifter lever with crystal-finish exterior 📄 Fitment Guide Model compatibility reference and basic install notes Product Highlights Faceted crystal-finish exterior — catches ambient cabin lighting with precision Precision-matched fitment for Range Rover Sport, Evoque & Discovery Sport Designed to replace the standard leather gear selector without modification Substantial feel in hand — weighted and confidence-inspiring to operate Complements factory ambient lighting, chrome trim, and soft-touch surfaces No drilling, no adhesives, no permanent changes to any OEM component Retains full gear selector functionality — all drive modes operate normally Resistant to everyday wear — does not discolour or degrade with regular use Installs in under 10 minutes with no specialist tools required A refined centrepiece upgrade for an already considered cabin environment Vehicle Compatibility Vehicle Code Year Range Fitment Range Rover Sport L494 2014–2022 Direct Fit Range Rover Evoque L551 2020–2021 Direct Fit Land Rover Discovery Sport L550 2020–2022 Direct Fit Range Rover Sport L461 2022–2026 Verify Before Purchase Range Rover Evoque L538 2011–2019 Verify Before Purchase Range Rover Vogue L405 2013–2021 Verify Before Purchase Land Rover Discovery 5 L462 2017–2022 Verify Before Purchase Land Rover Defender L663 2020–2026 Not Compatible Unsure of your variant? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes 🔧 Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Engage the handbrake and ensure the vehicle is in Park (P) with the engine off. Locate the base of your existing gear shift knob where it meets the selector surround. Apply firm, even upward pressure to unclip or unscrew the OEM knob — on most variants this is a twist-and-lift mechanism. Do not force it. Once removed, inspect the selector shaft to confirm thread pattern or clip type matches the new knob. Align the crystal shift knob with the shaft and press or thread firmly downward until fully seated — you should feel or hear a positive click or firm stop. Confirm the knob is secure by applying light lateral pressure. Switch the ignition on and verify all gear positions — P, R, N, D, S — function and display correctly. ⚠ Important: Confirm your exact variant and transmission configuration before installation. If your vehicle features an electronic shift-by-wire selector or a branded OEM knob with integrated controls, do not attempt installation without first contacting our team. Fitment on models outside the confirmed compatibility list cannot be guaranteed. Shop by Your Vehicle Looking for more interior upgrades tailored to your specific model? Browse the full curated collection for your vehicle below. 🚙 Range Rover Sport L494 2013–2022 accessories 🚙 Range Rover Evoque L551 2019–2024 accessories 🚙 Discovery Sport Interior & exterior upgrades Crafted for Land Rover Owners Who Notice the Details Every product at Victorious Automotive is chosen because it genuinely improves the ownership experience — not because it simply exists. This crystal gear shift knob is exactly that kind of upgrade: quiet, considered, and immediately noticeable to anyone who spends time in your cabin. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Carbon Fiber Style Interior Door Trim Set (4-Piece) — 2014–2019 Range Rover Sport L494 A precision-fit, four-piece ABS carbon fibre door trim upgrade that brings a sharper, more purposeful aesthetic to the Sport's interior — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2019 ABS Plastic Carbon Fibre Style 4-Piece Set Adhesive Fit Interior Trim ISO9001 Certified LLK893 Overview The Range Rover Sport L494 — produced between 2014 and 2019 — sits in a unique space: performance-oriented by character, luxurious by design. Its interior reflects that duality, but for owners who want to push that sporty identity a step further, the standard door trim inserts leave room for improvement. This is precisely where a well-executed carbon fibre style upgrade earns its place. This 4-piece interior door trim set is engineered to cover the inner door panel inserts across all four doors of the L494 Sport, replacing the factory finish with a bold carbon fibre weave aesthetic. Manufactured from high-grade ABS plastic under ISO9001-certified production standards, each piece is formed to mirror the exact curvature and profile of the original trim — ensuring a snug, gap-free fitment that looks factory-fitted rather than aftermarket. The installation relies on pre-applied 3M-grade automotive adhesive tape, which bonds firmly to clean, dry surfaces without requiring any permanent modification to your vehicle. For Sport owners looking to add a visual edge to the cabin without altering the structural integrity of the interior, this set delivers a clean, confident upgrade that complements the L494's performance character perfectly. What's Included 🚪 Front Left Door Trim Carbon fibre style ABS panel — driver side front 🚪 Front Right Door Trim Carbon fibre style ABS panel — passenger side front 🚪 Rear Left Door Trim Carbon fibre style ABS panel — driver side rear 🚪 Rear Right Door Trim Carbon fibre style ABS panel — passenger side rear Product Highlights Precision-formed carbon fibre style ABS — consistent weave pattern across all four pieces ISO9001-certified manufacture — strict quality control at every production stage Pre-applied automotive-grade adhesive tape — no tools or drilling required Custom-contoured to L494 Sport door geometry — seamless, flush fitment Lightweight construction — no added weight or interference with door mechanisms Scratch and fade-resistant surface finish — maintains appearance over time Full 4-door coverage — uniform visual upgrade throughout the entire cabin Non-destructive installation — fully reversible with no damage to factory panels Compatible with all trim levels of the 2014–2019 Range Rover Sport L494 Model reference LLK893 — purpose-designed for this generation Sport only Compatibility Vehicle Code Years Fitment Range Rover Sport L494 2014 – 2019 Direct Fit Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Vogue L405 2013 – 2020 Not Compatible Range Rover Vogue L460 2022 – 2026 Not Compatible Range Rover Velar L560 2018 – 2022 Not Compatible Defender L663 2020 – 2026 Not Compatible Range Rover Sport (pre-facelift) L320 2005 – 2013 Not Compatible Not sure which generation your Sport is? Check your vehicle's VIN plate or contact us at +44 203 943 9919 — we'll confirm fitment before you order. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 minutes  ·  🛠 Tools Required: None Start with a clean interior — remove any dust or residue from the existing door trim surfaces using an isopropyl alcohol wipe. Allow to dry fully before proceeding. Dry-fit each trim piece against its corresponding door panel to confirm alignment and orientation before removing the adhesive backing. Peel back a small section of the adhesive film on the first trim piece, align carefully to the factory trim edge, and press firmly into place from one end to the other to avoid air pockets. Once correctly positioned, apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Repeat the process for the remaining three trim pieces, working front to rear on one side before moving to the other. Allow the adhesive to fully cure for 12–24 hours before exposing to moisture or extreme temperature variations. ⚠ Important: Do not apply in temperatures below 10°C (50°F) — cold conditions significantly reduce adhesive bonding strength. Ensure the surface is completely dry and free from any wax, polish, or cleaning product residue prior to installation. Upgrade Your Sport's Interior Today Join over 12,300 Range Rover owners who trust Victorious Automotive for premium interior upgrades. Browse our full Range Rover Sport L494 collection to complete your interior refresh. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Side Vents for Range Rover Sport L494 (2013–2020) A bold, factory-finish upgrade that transforms the Sport's front quarter profile with a deep gloss black contrast — no cutting, no drilling, no compromise. Range Rover Sport L494 2013–2020 High Gloss Black ABS Direct OEM Fit Clip-On Installation Exterior Styling Side Vent Covers Pair Included Overview The Range Rover Sport L494 is one of Land Rover's most dynamic and visually assertive models — a vehicle designed to command attention on road and track alike. Its front quarter panel vents are a defining design cue, one of the first elements the eye is drawn to. The stock silver or body-coloured finish works well from the factory, but for owners who want a sharper, more purposeful aesthetic, the contrast of high gloss black is a compelling evolution. These High Gloss Black Side Vent covers are engineered specifically for the Range Rover Sport L494 generation, produced between 2013 and 2020. Manufactured from premium ABS plastic and finished to an automotive-grade high gloss, they overlay your existing side vents with a seamless, factory-looking result. The deep black finish adds a level of visual depth and aggression that complements both standard Sport trims and blacked-out custom builds equally well. Unlike paint-matched or wrapping alternatives, these covers require no bodywork, no adhesives, and no professional fitting. They clip directly onto your existing vents using the original mounting points, giving you a clean, rattle-free result in under an hour. Whether you're building a full stealth spec or simply looking to break up the body colour with a precision detail, these vents deliver a premium finish with none of the complexity. What's Included 🖤 High Gloss Black Side Vents Supplied as a matched pair — driver and passenger side 🔩 OEM-Style Mounting Clips Pre-fitted clips for secure, tool-free attachment 📋 Fitting Guide Step-by-step installation reference included 🛡️ Protective Packaging Foam-lined box to ensure finish is protected in transit Product Highlights High gloss black ABS finish — automotive-grade depth and clarity Manufactured specifically for Range Rover Sport L494 (2013–2020) Supplied as a pair — driver and passenger side included Clip-on fitment using OEM mounting points — no drilling required No adhesives, no heat tools, no professional fitting needed UV-stabilised material — resists fading, cracking and discolouration Precise panel-to-panel flush fit — clean, factory-standard look Complements blacked-out builds, dark packs and stealth specs Reversible — original vents can be reinstated at any time Compatible with all trim levels including SE, HSE, SVR and Autobiography Compatibility Vehicle Generation / Code Years Fitment Range Rover Sport SE L494 2013–2020 Direct Fit Range Rover Sport HSE L494 2013–2020 Direct Fit Range Rover Sport HSE Dynamic L494 2013–2020 Direct Fit Range Rover Sport SVR L494 2015–2020 Direct Fit Range Rover Sport Autobiography L494 2013–2020 Direct Fit Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Defender L663 L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–40 minutes  |  🔧 Tools Required: None Ensure your Range Rover Sport is parked on a level surface and the engine is off. Allow the vehicle to cool if recently driven. Gently clean the existing factory side vent panels with a microfibre cloth to remove any dust, wax or debris that could affect fitment alignment. Carefully flex the original vent panel slightly to locate the OEM clip positions — these are the same anchor points used by the new covers. Align the high gloss black vent cover over the factory vent, ensuring the edges sit flush with the surrounding bodywork before pressing into position. Apply firm, even pressure across the face of the cover until you feel and hear each clip engage securely. Do not force — the fit should be smooth and positive. Repeat the process on the opposite side. Step back and inspect both vents for alignment and panel-flush consistency before driving. ⚠ Note: Avoid installation in temperatures below 5°C — cold ABS can be less flexible and may affect clip engagement. If fitting in cold conditions, allow the covers to acclimatise to room temperature for 30 minutes beforehand. Do not use excessive force at any stage of installation. Upgrade Your Sport. Elevate Every Detail. At Victorious Automotive, every accessory we supply is chosen for owners who demand precision, quality and a finish that reflects the vehicle they drive. These side vents are a small change with a significant visual impact — exactly the kind of detail that sets a well-specced Sport apart from the rest. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or in any way connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced on this page are used for fitment identification purposes only and remain the property of their respective owners. Product imagery is for illustrative purposes — actual finish may vary slightly depending on screen calibration and ambient lighting conditions.

Victorious Automotive · Range Rover Sport L494 · Front Grille Upgrades SVR Style Front Centre Grille for Range Rover Sport L494 (2014–2017) Instantly elevate the front-end presence of your Range Rover Sport with an SVR-inspired centre grille — precision-engineered for a factory-accurate fitment on 2014–2017 L494 models. Range Rover Sport L494 2014–2017 SVR Style Front Centre Grille Direct Fit Premium ABS No Cutting Required Exterior Upgrade Overview The Range Rover Sport L494 is one of the most visually dynamic SUVs on the road — and the front grille is central to that identity. Whether you're refining a facelift model or giving your pre-facelift Sport a contemporary edge, the front centre grille is one of the first things anyone notices. The standard grille does its job, but it leaves performance character on the table. This SVR Style Front Centre Grille is designed to replicate the aggressive, purposeful aesthetic of the Range Rover Sport SVR — bringing that motorsport-derived front-end language to standard and SE-spec L494 models from 2014 through to 2017. Constructed from high-grade ABS polymer, it is finished to exacting standards and engineered to clip directly into the factory aperture without any modification to your vehicle's bodywork. For Sport owners who want their vehicle to look the part without a full body kit, this grille is one of the most impactful and cost-effective upgrades available. The transformation is immediate, and the fitment is precise enough that most observers will simply assume it came from the factory. At Victorious, we supply only components that meet the quality expectations of the vehicles they're made for — this grille is no exception. What's Included 🔲 SVR Style Centre Grille One front centre grille panel, ready to install 📄 Installation Instructions Step-by-step guide included in the box 🔩 Fitting Hardware All clips and fasteners required for installation 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights SVR-inspired design for an aggressive, motorsport-influenced front end Precision-engineered for direct OEM-style fitment on L494 2014–2017 High-grade ABS polymer construction for durability and impact resistance No cutting, drilling, or permanent modifications required Retains factory sensor and camera compatibility where applicable UV-stabilised finish to resist fading, cracking, and weathering Designed to match factory panel gaps and alignment tolerances Significant visual upgrade with minimal installation effort Lightweight construction — no added weight to the front end Compatible with standard, SE, HSE, and Dynamic trim levels Compatibility Vehicle Year Range Trim Fitment Range Rover Sport L494 2014–2017 Standard / SE Direct Fit Range Rover Sport L494 2014–2017 HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2017 Autobiography Direct Fit Range Rover Sport L494 2014–2017 SVR (Factory) Not Required Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Range Rover Defender L663 2020–2026 All Trims Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Trim removal tool, soft cloth Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet and secure it in the open position. Using a plastic trim removal tool, carefully release the retaining clips securing the original front centre grille. Work methodically from one side to the other to avoid cracking the surrounding bumper trim. Gently pull the existing grille forward and away from the bumper aperture. Set it aside on a soft cloth to avoid scratching either the grille or your paintwork. Check the aperture for any debris or clips that may have broken free during removal. Replace any damaged OEM clips before proceeding. Align the new SVR Style Centre Grille with the aperture, ensuring the mounting tabs are correctly seated before applying pressure. Press firmly and evenly across the grille face until all retaining clips engage with an audible click. Check alignment from both sides before closing the bonnet. Step back and inspect the panel gaps. If any section appears misaligned, release and re-seat the relevant clip rather than forcing fitment. ⚠ Important: Verify your exact model year and trim level before purchasing. The 2014–2017 pre-facelift L494 Sport has a different grille aperture to the 2018+ facelift variant. If you are unsure of your build date, check the VIN plate inside the driver's door jamb or contact us at +44 203 943 9919 before ordering. Upgrade Your Sport. Elevate Your Standard. The SVR grille look is one of the most recognisable upgrades you can make to a pre-facelift Range Rover Sport — and this is the cleanest way to achieve it. Explore the full range of L494 Sport accessories at Victorious and build the exact specification you want. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Silver & Gold Door Window Switch Frame Trim for Range Rover Vogue L405 & Range Rover Sport L494 (2013–2021) Crystal-embellished door switch frame trims that bring Swarovski-style sparkle and bespoke character to your Range Rover's interior in under two minutes. Range Rover Vogue L405 Range Rover Sport L494 2013–2021 Silver & Gold Swarovski-Style Crystals Chrome Accents 4-Piece Set No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent two of the most respected luxury SUVs ever produced — cabins defined by clean lines, premium materials, and a sense of composed sophistication. For owners who want to take that interior aesthetic one step further, the door window switch surrounds are a subtle but immediately visible canvas for personalisation. These door window switch frame trims are precision-cut to sit flush over the existing switch panels on all four doors, replacing the factory-finish surround with a statement piece finished in your choice of Silver or Gold. Each trim is studded with Swarovski-style crystals and framed with chrome detailing — delivering a diamond-cut sparkle that catches the light beautifully without overwhelming the cabin's original character. The appeal here is in the detail. Whether you're stepping into your Vogue after a long day or chauffeuring guests in your Sport, these trims communicate care and individuality. They fit using pre-applied adhesive backing, meaning installation requires no tools, no drilling, and no specialist knowledge — just a clean surface and two minutes of your time. What's Included 💎 Front Left Door Trim Crystal & chrome switch frame surround 💎 Front Right Door Trim Crystal & chrome switch frame surround 💎 Rear Left Door Trim Crystal & chrome switch frame surround 💎 Rear Right Door Trim Crystal & chrome switch frame surround 🔧 Pre-Applied Adhesive 3M-style backing — no tools required 📋 Fitting Instructions Step-by-step guide included in packaging Product Highlights Precision-cut to match L405 Vogue and L494 Sport door switch panel geometry exactly Available in Silver and Gold finishes to complement both light and dark interior colourways Swarovski-style crystal embellishments for genuine luxury sparkle Chrome and diamond-cut detailing frames each trim for added visual depth Pre-applied adhesive backing means zero tools and zero damage to factory panels Full four-door coverage in a single set — front and rear doors included Slim profile sits flush to the door card surface without any unsightly gaps Durable construction resists daily contact, UV light, and interior temperature fluctuations Reversible upgrade — trims can be removed without leaving residue on factory panels Installation takes under two minutes per door — complete the full set in one go Compatibility Model Code Year Range Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 5–10 minutes (full set) Start with a clean, dry interior. Use an isopropyl alcohol wipe to degrease the existing door switch frame surround on each door — this ensures maximum adhesive bond. Unwrap each trim piece and identify which piece corresponds to each door (front left, front right, rear left, rear right). Test the fit dry before peeling the adhesive backing. Peel the protective film from the adhesive backing on the first trim piece. Align the trim carefully over the switch surround, starting from one edge and pressing down gradually to avoid air bubbles. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond fully. Repeat for all four doors. Allow 30 minutes for the adhesive to fully cure before operating the windows repeatedly. ⚠ Important: Please verify your vehicle's model code (L405 or L494) and model year before ordering. Switch panel geometry changed significantly with the 2022 model year refresh on both the Vogue (L460) and Sport (L461). This product is not compatible with 2022 and newer variants. Elevate Every Detail At Victorious Automotive, we believe the finest Range Rovers are defined by the details their owners choose. These door switch frame trims are a simple, reversible, and genuinely beautiful upgrade for any L405 or L494 interior. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Buying 2 or more items? Use code 22GET20 for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG; this product uses Swarovski-style crystals and is not affiliated with or endorsed by Swarovski AG.

Victorious Automotive · Range Rover Sport L494 · Window Visors Window Visor Vent Shades for 2014–2023 Range Rover Sport — Rain, Sun & Wind Guard Deflectors Precision-moulded side window deflectors that let you keep the windows cracked in any weather — rain, wind, or glaring sun — without compromising the Sport's refined interior environment. Range Rover Sport L494 2014–2023 High-Grade ABS Plastic No-Drill Fit Rain Deflector Wind Guard Sun Visor ISO 9001 Certified Set of 4 Overview The Range Rover Sport L494 is built for owners who demand performance without compromise — a vehicle equally at home on a motorway cruise as it is navigating demanding terrain. That same standard should extend to every accessory fitted to it. These window visor vent shades are engineered specifically for the L494 Sport's door aperture profile, sitting flush with the roofline and complementing the vehicle's aerodynamic silhouette rather than fighting against it. Crafted from high-impact ABS plastic and formed to match the exact curvature of the Range Rover Sport's door frames, these deflectors create a controlled gap that allows fresh air to circulate inside the cabin even when rain is falling. The result is a noticeably fresher interior environment, reduced fogging on cooler days, and a meaningful reduction in wind buffeting noise when windows are slightly open at speed. Unlike generic universal-fit deflectors that sit awkwardly on the glass and peel away over time, these are tailored to the Sport's door geometry and install via a secure channel-mount system that requires no drilling, no adhesive, and no modification to your vehicle. Once fitted, they present a clean, tinted finish that reads as a factory option — which is precisely the level of detail Range Rover Sport owners expect. What's Included 🪟 Front Left Visor Driver's side, pre-formed to door profile 🪟 Front Right Visor Passenger's side, mirror-matched fit 🪟 Rear Left Visor Rear door, full-length deflector 🪟 Rear Right Visor Rear door, full-length deflector 📋 Fitment Instructions Step-by-step installation guide included Product Highlights Precision-moulded to fit Range Rover Sport L494 door profiles exactly — no gaps, no overhang Deflects rain away from the window opening, keeping cabin dry with windows ajar Reduces wind buffeting noise when driving with windows cracked at motorway speeds Improves interior air circulation without exposing passengers to direct wind or rain No-drill, channel-mount installation — preserves your vehicle's factory door finish High-impact ABS plastic construction resists UV fading, cracking, and warping over time Tinted smoke finish integrates cleanly with the Sport's window line aesthetic ISO 9001 certified production process ensures consistent quality across every unit Helps reduce interior fogging in cooler, damp conditions by allowing controlled ventilation Suitable for both standard and SVR Sport variants across the full 2014–2023 model range Compatibility Vehicle Code Years Fit Range Rover Sport (Standard) L494 2014–2023 Direct Fit Range Rover Sport SVR L494 2015–2023 Direct Fit Range Rover Sport HSE / HST L494 2014–2023 Direct Fit Range Rover Sport SE / Autobiography L494 2014–2023 Direct Fit Range Rover Sport (New Gen) L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible If you own a 2022–2026 Range Rover Sport L461, please visit our New Range Rover Sport L461 collection for compatible accessories. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Clean the door frame channel and window rubber seals on all four doors with a damp cloth. Ensure the surface is completely dry before proceeding. Lower each window fully before beginning fitment. This allows easier access to the door channel and prevents any pressure on the glass during installation. Starting at the front of the door, locate the leading edge of the visor and slide it into the upper door channel. Work gradually from front to rear, pressing the retention clips firmly into position as you go. Once seated, raise the window slowly to check that the visor does not obstruct window travel. The glass should pass smoothly without catching the visor's lower edge. Repeat for all four doors. No adhesive, drilling, or modifications to the door frame are required. ⚠ Note: Verify your exact model year before fitting. Vehicles produced in the 2022–2023 model year should be confirmed as L494 generation — not the newer L461 platform — as door profiles differ. If in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you fit. Built for the Range Rover Sport. Finished to Match. At Victorious Automotive, every product we list is selected for owners who care about the details. These window visors aren't an afterthought — they're a considered addition to one of the finest SUVs on the road. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, authorised by, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Sport L494 / Velar · Interior Trim Carbon Fibre Steering Wheel Trim for Range Rover Sport & Velar 2014–2020 Instantly elevate your Range Rover's interior with a precision-cut carbon fibre steering wheel trim that delivers the SVR aesthetic — no modification, no tools, no compromise. Range Rover Sport L494 Range Rover Velar 2014–2020 Carbon TPU Clip-On Fitment SVR Style No Drilling Required Interior Upgrade Overview The Range Rover Sport L494 and Range Rover Velar share some of Land Rover's most driver-focused interiors — but the standard steering wheel, while refined, lacks the visual drama that sets the top-tier SVR specification apart. If you've ever sat behind the wheel of an SVR and felt the difference that carbon detailing makes to the cockpit experience, you'll understand exactly what this trim is designed to achieve. This carbon fibre steering wheel trim is engineered specifically for Range Rover Sport and Velar models from 2014 to 2020. Manufactured from high-quality carbon TPU and precision laser-cut to match the exact contours of the OEM steering wheel, the trim clips cleanly and securely over your existing wheel cover — no adhesive, no drilling, no permanent changes. The result is a seamless, factory-finish look that is virtually indistinguishable from a full SVR replacement. Part of our broader Carbon Interior Package, this trim pairs beautifully with matching carbon gear surround, dashboard accents, and door handle covers available across our Range Rover Sport and Velar collections. It's the kind of upgrade that costs a fraction of a factory SVR steering wheel but delivers the same visual impact — immediately, and without a workshop booking. What's Included 🏎️ Carbon Fibre Steering Wheel Trim Precision laser-cut to OEM steering wheel profile 📎 Retention Clips Pre-fitted clip system for secure no-adhesive fitment 📄 Fitment Guide Simple step-by-step installation instructions included 🛡️ Protective Packaging Shipped securely to prevent transit damage Product Highlights Laser-cut precision for a flush, factory-level fit on OEM steering wheel High-quality carbon TPU construction — lightweight and durable Clip-over design — no adhesive, no tools, no permanent modification Replicates the SVR steering wheel carbon trim aesthetic exactly Part of the full Victorious Carbon Interior Package range Compatible with both Range Rover Sport L494 and Range Rover Velar Reversible installation — remove and refit with ease Resistant to UV fade and daily wear in high-touch environments No airbag interference — designed to sit clear of safety components Transforms the cockpit feel without workshop costs or downtime Compatibility Model Code Years Fitment Range Rover Sport L494 2014–2020 Direct Fit Range Rover Velar L560 2018–2020 Direct Fit Range Rover Vogue L405 2013–2020 Verify Before Order Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Years Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Park your vehicle on a flat surface and ensure the steering wheel is in the straight-ahead, unlocked position before beginning. Clean the existing steering wheel trim surface thoroughly with a lint-free cloth to remove any dust, oils, or debris that could affect clip engagement. Align the carbon fibre trim piece with the top section of your steering wheel, matching the profile to the OEM cover contours. Apply firm, even pressure along the trim from the centre outward, pressing each clip point into place until you feel a positive snap-fit engagement. Run your fingers along the full edge of the trim to confirm it is seated flush and uniformly — there should be no gaps or lifting at any point. Turn the steering wheel slowly through full lock in both directions to confirm the trim does not interfere with wheel rotation or any stalks. Important: Do not attempt installation with the vehicle in motion or with the engine running. Ensure the trim sits entirely clear of the airbag module and horn pad. If at any point the trim feels loose or misaligned, remove and re-seat before driving. If in doubt, consult a professional installer. Complete Your Carbon Interior This steering wheel trim is just one piece of a full carbon interior transformation. Browse our complete Carbon Interior Package for the Range Rover Sport L494 and Velar — and save when you bundle. Shop Range Rover Sport Accessories   Shop Range Rover Velar Accessories Buying 2 or more items? Use code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. SVR is a trademark of Jaguar Land Rover Limited.

Victorious Automotive · Land Rover Range Rover · Paddle Shifters Land Rover Range Rover Carbon Fiber Paddle Shifters — L405 / L494 / L460 / L461 (2013–2023) A direct-fit, no-drill upgrade that brings genuine carbon-effect tactility and sport-cabin presence to every gear change in your Range Rover. L405 · L494 · L460 · L461 2013–2023 Carbon Fiber Effect ABS Construction Peel & Stick Fit Interior Upgrade No Drilling Required Pair Included Overview The Range Rover's interior already sets a benchmark for luxury SUV refinement — but for the enthusiast who also drives with intent, the factory paddle shifters can feel like a missed opportunity. Whether you're threading through mountain switchbacks in a Sport L494, commanding a motorway in a Vogue L405, or settling into the cabin of a new L460 or L461, the paddle shifters are your most tactile point of driver engagement. They deserve to look and feel the part. These carbon fiber paddle shifter covers from Victorious Automotive are precision-formed to clip directly over your existing Range Rover paddle shifters, adding a bold gloss carbon-effect finish and a noticeably thicker, more substantial grip. The transformation is immediate — both visually and through your fingertips. The sleek layered carbon pattern complements dark, light, and SVAutobiography-spec interiors equally well, elevating the cabin without a single permanent modification. Constructed from durable ABS plastic with a high-fidelity carbon fiber surface effect, these covers are engineered to withstand daily use, temperature fluctuation, and the kind of repeated contact that comes with spirited driving. Installation takes under five minutes and requires no tools whatsoever — making this one of the most impactful-per-effort upgrades available for your Range Rover interior. What's Included 🏎️ Left Paddle Shifter Cover Carbon fiber effect, gloss finish — downshift side 🏎️ Right Paddle Shifter Cover Carbon fiber effect, gloss finish — upshift side 🔧 Pre-Applied 3M Adhesive Factory-fitted tape for secure, residue-free bonding 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Direct-fit design engineered specifically for Range Rover paddle geometry High-gloss carbon fiber effect surface for an authentic performance aesthetic Noticeably thicker profile adds tactile confidence during gear changes Pre-applied 3M-grade adhesive for a secure, lasting bond Zero drilling, zero cutting — completely reversible installation Durable ABS core resists flex, heat, and repeated contact over time Compatible with all trim levels including SE, HSE, Autobiography, and SVR Seamlessly complements other carbon fiber interior upgrades Gloss finish maintained with standard interior detailing products Covers ship as a matched pair — left and right included as standard Compatibility Model Generation / Code Years Fitment Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L460 2022–2023 Direct Fit Range Rover Sport L461 2022–2023 Direct Fit Range Rover Velar L560 2018–2023 Verify Before Purchase Range Rover Evoque L551 / L538 2011–2023 Not Compatible Land Rover Defender L663 2020–2023 Not Compatible Land Rover Discovery 5 L462 2017–2023 Not Compatible Installation Notes ⏱ Estimated Time: 3–5 Minutes  ·  🔧 Difficulty: Beginner  ·  🛠 Tools Required: None Begin with the vehicle stationary and the steering wheel in the neutral (straight-ahead) position for easiest access to both paddles. Clean the surface of your existing paddle shifters thoroughly using an isopropyl alcohol wipe or a lint-free cloth. Allow to dry completely — even residual moisture or oils will affect adhesion. Peel the protective film from the pre-applied adhesive on the back of the carbon fiber cover, taking care not to touch the adhesive surface. Align the cover carefully over the existing paddle, starting from the top edge and working downward to avoid air pockets or misalignment. Press firmly across the entire surface for 30–60 seconds to activate the adhesive bond. Pay extra attention to the edges and corners. Repeat for the second paddle. Allow 30 minutes before driving to ensure a full initial set of the adhesive. ⚠ Important: Do not apply in temperatures below 10°C (50°F) as this will reduce adhesive performance. If removing the covers, use a plastic trim removal tool and apply gentle heat from a hairdryer to soften the adhesive — never force or pull sharply, as this may mark the underlying factory paddle surface. Shop by Your Range Rover Browse the full range of interior and exterior accessories curated specifically for your vehicle generation: 🚙 Range Rover Vogue L405 2013–2021 accessories 🚙 Range Rover Sport L494 2013–2022 accessories 🚙 Range Rover Vogue L460 2022–2026 accessories 🚙 Range Rover Sport L461 2022–2026 accessories Upgrade Your Range Rover Interior Today Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium, precision-fit accessories. Worldwide shipping via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Images are for illustrative purposes only.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Grille & Vent Set — Range Rover Sport L494 (2018–2020) A precision-engineered carbon fibre styling upgrade that sharpens the front fascia of your Range Rover Sport with an assertive, motorsport-inspired presence. Range Rover Sport L494 2018–2020 Carbon Fibre Finish ABS Construction Direct Fit Grille & Vent Set Exterior Styling No Drilling Required Overview The Range Rover Sport L494 in its 2018 facelift guise already commands attention — but for owners who demand more, the standard plastic grille and vent surrounds can feel underwhelming next to the vehicle's broader capability and character. This is particularly true for Sport owners running SVR-style bodywork, Dynamic or HSE trims, where the front end benefits most from a stronger visual anchor. This Carbon Fiber Grille and Vent Set is designed as a direct replacement for the factory front grille surround and lower vent trim on the 2018 and newer Range Rover Sport L494. Constructed from waterproof, high-impact ABS with a carbon fibre-effect finish, it replicates the visual depth and texture of real weave carbon without the fragility or premium cost associated with dry carbon components. The result is a front end that reads as more aggressive, more purposeful, and more refined — all at once. Every dimension of this set has been developed to match OEM mounting points precisely. No cutting, drilling, or modification to your vehicle's bodywork is required. Whether you're building a full exterior transformation or simply looking for one high-impact change to the front of your Sport, this grille and vent set delivers a genuine visual step-up that holds up in person as well as it does in photographs. What's Included 🔲 Front Grille Surround Carbon fibre-finish ABS, main grille frame piece 🔳 Lower Vent Trim Set Matching lower bumper vent inserts, full pair 📄 Installation Guide Step-by-step fitting reference included 🔩 Mounting Hardware OEM-compatible clips and fixings where required Product Highlights Designed specifically for the 2018–2020 Range Rover Sport L494 facelift High-quality ABS construction with durable carbon fibre-effect surface finish Direct OEM replacement — no cutting, drilling, or bodywork modification Waterproof and UV-resistant for long-term exterior use in all climates Full grille and vent coverage for a cohesive, factory-finished appearance Lightweight fitment — no impact on vehicle weight distribution or aerodynamics Compatible with standard, Dynamic, HSE, and SVR-spec bumper configurations 100% brand new — never used, never refurbished Backed by Victorious Automotive's 30-day money-back guarantee Ships worldwide via DHL, FedEx, UPS, and TNT with full tracking Compatibility Vehicle Year Range Trim / Notes Fitment Range Rover Sport L494 2018–2020 SE, HSE, Dynamic, Autobiography Direct Fit Range Rover Sport L494 2018–2020 SVR Direct Fit Range Rover Sport L494 2013–2017 Pre-facelift models Not Compatible Range Rover Sport L461 2022–2026 All trims — different platform Not Compatible Range Rover Vogue L405 2013–2020 Different grille architecture Not Compatible Range Rover Velar 2018–2022 Different grille architecture Not Compatible Not sure which model year you have? Check your V5C or VIN plate — or call us on +44 203 943 9919 and we'll confirm compatibility before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tool, plastic pry bar, soft cloth With the vehicle parked and cooled, open the bonnet and ensure the front bumper area is clean and free of debris before beginning. Using a plastic trim removal tool, carefully release the OEM grille surround clips from the front bumper assembly, working from one side to the other to avoid stress fractures on the surrounding trim. Disconnect any ambient air temperature sensors or adaptive cruise radar connections if routed through the grille area, labelling each connector for reassembly. Remove the factory vent insert trims from the lower bumper section using the same clip-release technique, taking care not to scratch the bumper paint surface. Dry-fit the new carbon fibre grille surround and vent trims before final installation to confirm alignment and clip engagement at all mounting points. Press each component firmly and evenly into position until all clips audibly engage. Reconnect any sensors or connectors disconnected during removal. Step back and inspect the finished fitment from the front and side for panel gaps, alignment consistency, and flush finish before closing the bonnet. ⚠ Note: If your vehicle features an active grille shutter system or integrated radar hardware, we recommend having installation completed by a qualified Land Rover technician to avoid disruption to driver assistance systems. Always verify component alignment before driving. Upgrade Your Sport. Elevate Your Standard. Trusted by over 12,300 Range Rover and Land Rover owners worldwide, Victorious Automotive is the specialist choice for exterior upgrades that fit properly, look exceptional, and last. Browse the full Range Rover Sport L494 collection or get in touch — our team knows these vehicles inside and out. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious · Range Rover Sport · Interior Trim Red Carbon Fiber Gear Shift Knob for Range Rover Sport 2014–2020 Premium real carbon fiber shift knob cover that transforms your interior with sportiness and precision engineering. L494 2014–2020 Carbon Fiber Interior Trim Direct Fit Overview The Range Rover Sport L494 (2014–2020) deserves interior touches that match its commanding presence on the road. This red carbon fiber gear shift knob cover is engineered specifically for your Sport, replacing the factory plastic trim with genuine carbon fiber that catches light and commands attention every time you shift. Crafted from real carbon fiber—not vinyl wrap or film—this piece delivers authentic material depth and durability that mirrors the vehicle's engineering philosophy. The striking red finish complements both modern and classic Sport interiors, adding a layer of intentional sportiness to the cabin. Installation takes minutes with pre-applied dual-sided adhesive; no tools required. This is the kind of detail that separates thorough ownership from surface-level customization. It's visible every single drive, subtle yet unmistakably premium, and built to outlast trends. What's Included 🪡 Shift Knob Cover Real carbon fiber, red finish 🏷️ Pre-Applied Adhesive Dual-sided tape, factory-strength 📋 Installation Guide Clear, step-by-step instructions 🛡️ 30-Day Guarantee Money-back promise, no questions Product Highlights Genuine real carbon fiber—not printed, not vinyl, not resin Precision-molded for exact fit on Range Rover Sport L494 shifter Red gloss finish with protective UV-clear coat Pre-applied adhesive tape ensures secure, permanent bond Installation requires zero tools or technical skill Weighs under 50g—negligible mass, maximum impact Resists fingerprints, dust, and daily wear Compatible with manual and automatic gearboxes Safe for leather and plastic shift knobs Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Year Range Fit Status Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport L461 2022+ Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022+ Not Compatible Land Rover Discovery 5 2017+ Not Compatible Note: This cover is engineered exclusively for the 2014–2020 Range Rover Sport L494. Confirm your vehicle code before ordering. Installation DIY Fit – Beginner Level Time Required: 5–10 minutes | Tools: None Power off your vehicle and allow the cabin to reach room temperature (adhesive bonds best at 68–72°F). Clean the existing shift knob with a lint-free cloth and mild rubbing alcohol. Allow 2 minutes to dry completely. Peel back the red protective film on the carbon fiber cover to expose the adhesive. Carefully align the cover with your shift knob and press firmly for 30 seconds, working from centre outward to eliminate air bubbles. Allow the adhesive to cure for 24 hours before operating the shift lever. ⚠️ Important: Ensure the shift knob surface is completely dry and free of oils, waxes, or previous coatings. Any contaminant will reduce adhesive strength. If removal is needed within the first 7 days, use a heat gun (low setting) to gently loosen the cover—do not force it. Why Choose Victorious We specialise exclusively in Range Rover, Land Rover, and Defender parts. Every product is tested on real vehicles in our workshop. We ship worldwide via DHL, FedEx, UPS, and TNT. With 12,300+ verified 4.9⭐ reviews and a 30-day money-back guarantee, your satisfaction is protected. Need help? Ring us Monday–Friday, 9am–7pm: +44 203 943 9919. Upgrade Your Sport Interior This red carbon fiber shift knob cover is the kind of detail that separates enthusiasts from casual owners. Premium materials. Precision fit. Built to last. Add to Basket Use code 22GET20 for 20% off any 2 items ✓ 12,300+ Reviews – 4.9⭐ ✓ 30-Day Guarantee – Money back ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or any official Land Rover dealer. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility information is provided in good faith; please verify fitment with your vehicle documentation before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious · Range Rover Sport L494 · Exhaust 2020 Range Rover Sport L494 Exhaust Muffler with SVR Quad Tips – Silver Premium stainless steel quad-tip exhaust trim that transforms your Sport's rear end with commanding visual presence and lasting durability. L494 2013–2020 Stainless Steel SVR Quad Tips Adhesive Install Silver Finish Overview If you own a 2020 Range Rover Sport L494, you understand that this generation of the Sport demands presence. Every detail matters—and few details carry the visual weight of a muscular exhaust treatment. Our SVR-inspired quad-tip muffler trim is engineered specifically for the L494 chassis to deliver that high-performance look without compromise. Crafted from premium grade stainless steel, this exhaust trim cover protects your original muffler while presenting a sleek, aggressive aesthetic that commands attention. The quad-tip design echoes the motorsport DNA of Range Rover's performance lineup, instantly elevating your Sport's character. Unlike generic covers, this is laser-cut for pixel-perfect fitment on your 2020 model. Installation is straightforward using high-quality automotive adhesive tape. The silver finish coordinates beautifully with most Sport configurations, catching light and adding depth to the rear quarter. Backed by our 30-day money-back guarantee, you're investing in a proven accessory trusted by thousands of Range Rover enthusiasts worldwide. What's Included ✦ Pair of Exhaust Trim Covers Stainless steel, laser-cut for L494 ✦ Automotive Adhesive Tape High-strength bonding, pre-cut ✦ Installation Guide Step-by-step instructions included ✦ Cleaning Prep Materials Surface preparation cloth included Product Highlights SVR-inspired quad-tip design for authentic performance character Premium grade 304 stainless steel—corrosion and UV resistant Laser-cut for exact L494 fitment with zero guesswork Silver finish complements factory wheels and trim accents Protects original muffler from wear, oxidation, and damage High-strength automotive adhesive tape for permanent hold Easy installation—no cutting or modification required Sophisticated alternative to chrome plating Tested in real-world UK climate conditions Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Year Range Generation Fitment Range Rover Sport 2013–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 (New) Not Compatible Range Rover Vogue L405 2013–2020 L405 Not Compatible Range Rover Velar 2018–2022 L560 Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 Minutes Prepare the surface: Clean the rear muffler area thoroughly with the included prep cloth. Remove any dirt, dust, or residue. Allow to dry completely. Heat the adhesive tape: Gently warm the adhesive tape using a heat gun (or warm (not hot) hairdryer on medium setting for 20–30 seconds per section. This activates the bonding agent. Position the trim: Carefully align the quad-tip trim cover with the muffler opening. Start at the center and work outward to avoid air bubbles. Apply pressure: Press firmly along the entire length of the trim, ensuring even contact for 30–60 seconds per section. Allow cure time: Wait a minimum of 4 hours before exposing the muffler to heat or driving. Full bond strength develops over 24 hours. Important: Do not apply tape or trim in temperatures below 10°C (50°F). Cold adhesive will not activate properly. If your climate is cool, allow the vehicle (and adhesive tape) to reach room temperature indoors before installation. Transform Your Sport's Presence The rear quarter of your Range Rover Sport deserves a finish that matches its engineering. This SVR-inspired quad-tip trim is the easiest way to inject visual drama and protect your original muffler all at once. Shop Range Rover Sport L494 Exhausts Use code 22GET20 for 20% off any 2 items 4.9/5 Stars — 12,300+ verified reviews 30-Day Guarantee — Money back, no questions Worldwide Shipping — DHL, FedEx, UPS, TNT Expert Support — +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover dealership. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility and fitment are based on manufacturer specifications and real-world testing. Always verify fitment before purchase. Victorious Automotive accepts no liability for incorrect fitment or installation damage. Refer to your vehicle's owner's manual for specific guidance.

Victorious · Range Rover Sport L494 · Exhaust 2020 Range Rover Sport SVR Style L494 Quad Tip Exhaust & Muffler – Sleek Black Design Elevate your Range Rover Sport's rear presence with an aggressive SVR-inspired quad exhaust system in premium gloss black. L494 2013–2020 Stainless Steel Dual Exhaust SVR Style High Gloss Black Overview The Range Rover Sport L494 (2013–2020) has always demanded a bold presence. Factory exhaust systems play it safe—this quad-tip system doesn't. Inspired by the high-performance SVR variant, this upgrade transforms the rear quarter in one go, delivering the stance and aggression your Sport deserves. Engineered from premium stainless steel and finished in deep high-gloss black, the dual-piece construction fits cleanly beneath the bumper, protecting your original muffler while creating a commanding visual impact. Laser-cut precision ensures zero gaps and a factory-tight finish every time. Installation is straightforward—adhesive tape and heat do the work for you. No welding, no fabrication, no compromise. Whether you're running a standard Sport or an SVR, this system adds the performance aesthetic your vehicle demands. What's Included 🏁 2× Exhaust Trim Covers Left and right quad-tip sections in high-gloss black. 🔧 Professional Adhesive Tape High-temp rated for secure, permanent bonding. Product Highlights SVR-inspired quad-tip design for aggressive aesthetics Premium stainless steel construction for longevity High-gloss black finish resists weathering and fading Laser-cut precision ensures perfect fitment Protects and enhances your original exhaust system Easy installation with included adhesive tape Professional finish—no welding or fabrication required Heat-activated adhesive for maximum bond strength Dual-piece design fits L494 factory bumper contours Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Variant Fitment Status 2013–2019 Range Rover Sport L494 Standard Direct Fit 2020 Range Rover Sport L494 Standard Direct Fit 2013–2020 Range Rover Sport L494 SVR Not Compatible Range Rover Sport L320 (2005–2013) Not Compatible Range Rover Sport L461 (2022+) Not Compatible Installation Difficulty: Easy | Time: 30–45 Minutes Clean the rear bumper area thoroughly with soap and warm water. Dry completely. Position the left exhaust trim cover over the factory muffler tip. Ensure alignment with bumper contours. Apply the high-temp adhesive tape to the reverse side of the trim cover. Warm the adhesive tape with a heat gun (150–180°C) for 10–15 seconds to activate the bond. Press the trim cover firmly against the muffler for 30 seconds while the adhesive sets. Repeat steps 2–5 for the right-side cover. Allow 24 hours full cure time before driving or washing the vehicle. Important: Do not install on SVR models—the exhaust geometry differs. Ensure bumper surface is clean and dry for optimal adhesion. Use moderate heat only; excessive temperature may damage plastic bumper trim. Transform Your Sport Today The difference between a standard Range Rover Sport and one that commands attention comes down to details. This quad-tip exhaust system is that detail. Premium finish, precise fit, backed by our promise. Shop Range Rover Sport L494 Save 20% on any two Victorious products with code 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 UK support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket parts specialist and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All vehicle names and logos are the property of their respective manufacturers. This product is designed to fit the specified vehicle model(s) and is sold as an accessory enhancement only.

Victorious Automotive · Range Rover & Discovery · Interior Trim SVO Autobiography Style Armrest Adjuster Knobs for Range Rover Sport, Vogue & Discovery (2005–2022) Precision-machined chrome metal armrest adjustment knobs in the SVO Autobiography style — a direct-fit upgrade that brings a noticeably more premium feel to your interior in under five minutes. L320 · L322 · L494 · L405 · L319 2005–2022 Chrome Metal SVO Autobiography Style Direct Fit Laser Cut Pair Included 5-Min Install Interior Upgrade Overview The Range Rover Sport, Vogue, and Discovery have always carried a reputation for refined interior quality — but for owners of models built between 2005 and 2022, the original armrest adjustment knobs are one of those small details that quietly undermine the premium experience. Plastic, basic in form, and prone to showing wear, they're a detail most owners notice but rarely think to address. These SVO Autobiography Style Armrest Adjusters are purpose-built to resolve exactly that. Machined from metal and finished in a polished chrome, they replicate the elevated aesthetic of Land Rover's in-house SVO (Special Vehicle Operations) Autobiography specification — bringing a tactile, upmarket quality to a component you interact with every single journey. The precision laser-cut patterning adds visual depth and grip, making them as functional as they are refined. Installation is genuinely tool-free and takes under five minutes. The knobs thread directly onto the existing adjuster stems as an exact replacement — no modifications, no adhesives, no guesswork. For owners who care about every detail of their cabin, this is the kind of upgrade that rewards close attention. What's Included 🔩 Armrest Adjuster Knobs × 2 One pair — left and right seat fitment 📄 Fitment Guide Basic installation reference included Product Highlights Durable metal construction for long-lasting wear resistance Polished chrome finish matching Autobiography interior hardware Precision laser-cut patterning for grip and visual detail Direct replacement for factory plastic knobs — no modifications needed Installs in under 5 minutes with no tools required SVO Autobiography style design for a factory-spec premium look Sold as a pair — covers both driver and passenger armrests Compatible across a wide 2005–2022 model year range Adds tactile quality to one of the cabin's most-touched components A subtle upgrade with a disproportionately high visual impact Compatibility Model Code Years Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L322 2005–2012 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Discovery L319 (Disco 4) 2009–2016 Direct Fit Discovery L462 (Disco 5) 2017–2022 Direct Fit Range Rover Sport L461 2022–2026 Verify Before Purchase Range Rover Vogue L460 2022–2026 Verify Before Purchase Range Rover Velar L560 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5 Minutes  ·  Tools Required: None Locate the existing armrest adjustment knobs on both driver and passenger seats — typically positioned at the rear base of each armrest. Grip the factory knob firmly and rotate counter-clockwise to unscrew it from the adjuster stem. It should release with minimal resistance. Clean the exposed stem with a dry cloth to remove any dust or residue before fitting the new knob. Thread the new SVO Autobiography Style knob clockwise onto the stem, tightening by hand until secure and flush against the armrest base. Repeat for the second seat. Test the adjustment mechanism to confirm smooth, full operation before use. ⚠ Compatibility Note: These knobs are designed to thread onto specific OEM adjuster stems. Stem diameter and thread pitch can vary between model years and trim levels. Please compare the existing knob thread to the product specifications or contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) to confirm fitment before ordering. The Detail That Sets Your Interior Apart It's often the smallest changes that define a truly well-kept cabin. These SVO Autobiography Style Armrest Adjusters are a quiet, considered upgrade — the kind that other Range Rover owners notice immediately. Order today and ship worldwide via DHL, FedEx, UPS, or TNT. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment reference purposes. SVO and Autobiography are registered trademarks of Jaguar Land Rover. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Steering Wheel Button Trim in Silver & Gold — Range Rover Vogue & Sport (2014–2017) Crystal-embellished chrome steering wheel button trim that brings a bespoke, jewelled finish to the L405 Vogue and L494 Sport cabin — fitted in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2017 Chrome Finish Swarovski-Style Crystals Silver & Gold No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 were built to a standard that few rivals could match — full-width instrument panels, Windsor leather, and a cabin that genuinely felt hand-crafted. But even in that environment, the steering wheel controls can feel like a missed opportunity. Small, functional, and largely overlooked, they sit front and centre of your driving view every single day. This two-piece steering wheel button trim addresses that gap with precision. Crafted in polished chrome and finished with Swarovski-style crystals, each piece slots over your existing steering wheel controls to create a jewelled surround that reads as factory-fitted. Available in both silver and gold to complement whichever interior palette your vehicle carries — from Ivory to Ebony, or Autobiography dark-themed builds that suit the warmer gold tone beautifully. Installation requires no tools, no adhesives beyond the pre-applied tape already bonded to the trim, and no expertise beyond a clean cloth and sixty seconds of your time. For owners who want the interior to feel as considered as the exterior, this is one of the simplest and most impactful upgrades available for the 2014–2017 generation. What's Included 💎 Steering Wheel Trim Set Two-piece chrome surround with crystal detailing 🔧 Pre-Applied Adhesive Tape Factory-bonded to each piece for clean, tool-free fitting 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Polished chrome construction with premium Swarovski-style crystal detailing Available in silver and gold to match any L405 or L494 interior scheme Precision-moulded two-piece design for seamless steering wheel integration Pre-applied 3M-grade adhesive tape — no drilling, no tools, no mess Installation completed in under two minutes with zero technical knowledge required Durable chrome finish resistant to everyday contact and UV exposure Crystals are individually set and quality-checked for alignment and brilliance Does not obstruct or interfere with steering wheel button functionality Fully reversible — removes cleanly without leaving marks on original trim Tailored specifically for 2014–2017 steering wheel button cluster geometry Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2018–2021 (facelift) Verify Steering Wheel Range Rover Sport L494 2018–2022 (facelift) Verify Steering Wheel Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Difficulty: Beginner  |  Time: Under 2 Minutes  |  Tools Required: None Park your vehicle safely and turn off the ignition. Allow the steering wheel to cool to room temperature if the cabin has been in direct sunlight. Using a clean microfibre cloth, thoroughly wipe down the steering wheel button surround area to remove all dust, fingerprints, and any polish residue. The surface must be completely clean and dry for optimal adhesion. Carefully peel the backing film from the pre-applied adhesive tape on both trim pieces — avoid touching the adhesive surface. Align the first trim piece over the left-hand button cluster, confirming it sits flush and centred before pressing down firmly for 10–15 seconds. Repeat the process for the right-hand piece, applying firm, even pressure across the full surface once positioned correctly. Allow the adhesive to cure for at least 30 minutes before normal driving — avoid touching or adjusting the trim pieces during this period. ⚠ Important: Do not clean the contact area with silicone-based products or wax prior to fitting — these will compromise adhesion. If removing the trim in future, use dental floss or thin fishing line to gently cut through the adhesive layer from left to right to avoid marking the original steering wheel surface. Elevate Every Mile Small details define the difference between a well-specified Range Rover and one that's been truly personalised. Browse the full collection of interior upgrades for your L405 Vogue or L494 Sport — and use the code below to save on your next two items. Shop L405 Vogue Accessories Shop L494 Sport Accessories Buy any 2 items and save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG — crystals featured are Swarovski-style and are not manufactured by or affiliated with Swarovski AG.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Carbon Fiber Side Air Outlet Vent Trim for Range Rover Models (2014–2019) A precision-laser-cut carbon TPU vent trim set that transforms the climate control area of your Range Rover into something that genuinely looks the part — clean, purposeful, and built to last. Range Rover L405 Range Rover Sport L494 2014–2019 Carbon TPU 4-Piece Set No-Drill Install SVR-Style Finish 3M Tape Included Overview The 2014–2019 Range Rover Vogue L405 and Range Rover Sport L494 are vehicles built around presence — both on and off the road. Inside, the climate control vents are a subtle but unmistakable focal point of the centre console area, and like most production interiors, they arrive from the factory in standard black plastic. Functional, yes. Distinctive, not quite. This Carbon Fiber Side Air Outlet Vent Trim set is designed specifically to address that. Crafted from high-quality carbon TPU and laser-cut for a factory-precise fit, each piece clips directly over your existing vent housing with zero modification required. The result is a clean, woven carbon-effect finish across all four side vents — the kind of detail that owners and enthusiasts actually notice. Inspired by the SVR interior aesthetic, this trim brings a sportier, more focused character to the cabin without disrupting its existing elegance. Whether you're building out a full interior upgrade or simply looking for one well-chosen detail piece, this set delivers immediate visual impact with a five-minute installation. What's Included 🪟 Carbon Vent Trim × 4 Full set — all four side AC outlet positions covered 🔲 3M Adhesive Tape Pre-applied to the rear of each trim piece — ready to install 📋 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision laser-cut for a seamless, factory-quality fitment on 2014–2019 models High-quality carbon TPU construction — durable, lightweight, and heat-resistant Clips directly over existing vent housing — no drilling, cutting, or tools required Pre-applied 3M adhesive tape on each piece for a secure, long-lasting bond SVR-inspired carbon weave aesthetic — a subtle but immediately noticeable upgrade Full 4-piece set covers all side air outlet vent positions in one purchase Compatible with both Range Rover Vogue L405 and Range Rover Sport L494 variants Maintains full vent functionality — airflow and direction adjustment unaffected Consistent carbon weave pattern across all four pieces for a matched appearance Installation achievable in under 10 minutes with no previous fitting experience needed Compatibility Model Code Year Range Fitment Range Rover Vogue L405 2014–2019 Direct Fit Range Rover Sport L494 2014–2019 Direct Fit Range Rover Sport SVR L494 2014–2019 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Discovery 5 L462 2017–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 5–10 minutes  |  🔧 Tools Required: None Begin with a clean, dry interior — use a microfibre cloth to wipe down each vent housing and remove any dust, fingerprints, or residue from the surface. Unbox all four carbon vent trim pieces and verify correct positioning against each vent before committing — dry-fit each piece briefly to confirm alignment and orientation. Peel the protective backing from the pre-applied 3M adhesive tape on the rear of the first trim piece. Align the trim piece carefully over the corresponding vent housing, ensuring the edges sit flush and the carbon weave faces outward cleanly. Apply firm, even pressure across the entire surface for 20–30 seconds to activate the 3M bond securely. Repeat steps 3–5 for the remaining three trim pieces, working from one side of the console to the other for consistency. Allow the adhesive to fully cure for 30–60 minutes before operating climate controls at high airflow settings. ⚠ Note: Ensure all vent surfaces are completely free of polish residue, silicone-based protectants, or moisture before fitting. These can significantly reduce 3M adhesive performance. Do not attempt installation in cold ambient temperatures below 10°C — allow the vehicle interior to warm before applying. Upgrade Your Range Rover Interior Today Every detail matters inside a Range Rover. This carbon vent trim set is a precise, considered upgrade — one that complements the cabin's premium character rather than competing with it. Shipped worldwide via DHL, FedEx, UPS, and TNT, backed by our 30-day money-back guarantee. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Use code: 22GET20 — Save 20% when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Product imagery is for illustration purposes only — minor variations in finish may occur between production batches.