Victorious Automotive · Land Rover · Cooling System
3.0 V6 Petrol Auto Thermostat Housing with Sensor
OEM-spec coolant thermostat assembly engineered to restore precise engine temperature regulation across Range Rover, Range Rover Sport, Discovery, and Velar platforms.
Direct Fit
3.0 V6 Petrol
2010–2023 Platforms
LR062498 · LR069809 · LR095895
PP + Integrated Sensor
Cooling System
Overview
Range Rover, Range Rover Sport, Discovery LR4, and Range Rover Velar owners rely on precision engine cooling to maintain performance and longevity. The 3.0 V6 petrol engine in these platforms demands a thermostat assembly that responds instantly to thermal load changes—regulating flow to the radiator, heater core, and auxiliary circuits without hesitation.
This OEM-specification thermostat housing unit combines a calibrated thermostatic element with integrated temperature sensor, restoring factory-correct engine management communication. Unlike aftermarket alternatives that sacrifice tolerances or sensor accuracy, this assembly matches original equipment specifications for mechanical action and electronic feedback.
Manufactured to Land Rover engineering standards, it integrates seamlessly with existing hose and coolant passages, requiring no modification to your vehicle's cooling loop. The 12-month warranty and worldwide shipping via DHL/FedEx ensure you're covered, wherever you are.
What's Included
🔧
Thermostat Housing Assembly
Calibrated wax-pellet element with gated valve action
📡
Integrated Temperature Sensor
Engine management—ready feedback signal
📐
OEM Mounting Points
Direct bolt-on—no adapter or modification
✓
12-Month Warranty
Full coverage on material and workmanship
Product Highlights
- OEM-equivalent wax-pellet mechanism for responsive throttle response
- Integrated NTC thermistor sensor for accurate ECU feedback
- Polypropylene housing rated for sustained coolant pressures
- Factory calibration: opens at ~88°C, fully open at ~100°C
- Fits Discovery 4 (2010+), Range Rover (2013+), Range Rover Sport (2014+), Velar (2017+)
- Direct replacement—no modification to hoses, fittings, or engine bay routing
- Tested for thermal cycling durability and sensor repeatability
- Shipped with gasket-sealed packaging to prevent contamination
- Fully compatible with OEM coolant concentrations (50/50 ethylene glycol mix)
- Backed by 30-day money-back guarantee for complete peace of mind
Compatibility
| Model |
Year Range |
Engine |
Status |
| Land Rover Discovery 4 (LR4) |
2010–2023 |
3.0 V6 Petrol TDV6 |
Direct Fit |
| Range Rover Vogue |
2013–2021 |
3.0 V6 Petrol Supercharged |
Direct Fit |
| Range Rover Sport |
2014–2022 |
3.0 V6 Petrol Supercharged |
Direct Fit |
| Range Rover Velar |
2017–2023 |
3.0 V6 Petrol Supercharged |
Direct Fit |
| Land Rover Discovery 5 |
2017–2023 |
3.0 V6 Petrol Turbocharged |
Direct Fit |
| Diesel / TDV8 engines |
All years |
N/A |
Not Compatible |
Part Number Cross-Reference: OEM: LR062498, LR069809, LR095895, LR107288 | Manufacturer: LR117568. Confirm your vehicle's VIN if unsure—contact us toll-free +44 203 943 9919 (Mon–Fri 9am–7pm GMT).
Installation Notes
Difficulty Level: Intermediate | Estimated Time: 45–90 minutes
-
Preparation: Allow engine to cool completely. Disconnect the negative battery terminal. Drain coolant into a clean container (you will reuse it).
-
Remove inlet hose: Locate the upper radiator hose and loosen the spring clamp at the thermostat housing. Gently withdraw the hose; be prepared for minor coolant spillage.
-
Unbolt old housing: Remove two M10 bolts securing the thermostat housing to the engine block. Carefully lift away the old assembly and discard the rubber gasket.
-
Clean mating surface: Use a soft cloth and isopropyl alcohol to remove old gasket residue from the engine block. Ensure the surface is dry and free of debris.
-
Install new assembly: Position the new thermostat housing over the dowel pins, align the bolt holes, and hand-tighten both bolts. Torque to 25 Nm (18 ft-lbs) in a cross pattern.
-
Reconnect hose: Slide the inlet hose onto the new housing outlet nipple. Secure the spring clamp firmly—ensure no twisting or kinking.
-
Refill coolant: Pour your reserved coolant (or fresh OEM mix at 50/50 ratio) into the expansion tank until it reaches the MIN line. Start the engine and allow it to reach normal operating temperature, then top up as needed.
-
Verify sensor connection: Check that the sensor harness is fully seated in the new housing connector—you should hear a distinct click.
-
Clear codes (if applicable): If your vehicle displays coolant temperature faults, connect a diagnostic scanner and clear pending codes. The ECU will learn the new sensor calibration within two or three drive cycles.
⚠ Important: Never open the cooling system while the engine is hot—risk of severe scalding and pressure release. Always drain coolant into a container and dispose of it responsibly; ethylene glycol is toxic to animals. If you do not feel confident performing this job, have a Land Rover–trained technician carry it out.
Ready to Restore Engine Cooling Precision?
This thermostat assembly is engineered for Range Rover and Discovery owners who demand OEM-level reliability without compromise. Get it installed before the next drive season and enjoy stable temperatures, predictable fan cycling, and peace of mind.
Add to Cart & Install Today
Use code 22GET20 for 20% off when you purchase any 2 items.
30-day money-back
4.9★ 12,300+ reviews
Worldwide DHL / FedEx / UPS
+44 203 943 9919 Expert support
Disclaimer: Victorious Automotive is an independent aftermarket parts specialist and is not affiliated with, endorsed by, or a subsidiary of Land Rover, Jaguar Land Rover, or any parent company. All product names, logos, and trademarks are the property of their respective owners. This product is designed for use as a replacement component and does not modify or alter the original vehicle specifications or safety systems. Always consult your vehicle's service manual and a qualified technician before undertaking any work. We are not responsible for installation errors, misapplication, or vehicle damage resulting from improper use of this product.
