Victorious · Land Rover Freelander LR2 · Cooling System
Radiator Coolant Hose Upper & Lower for Land Rover Freelander LR2 2008–2012
OE-quality replacement hoses engineered to restore optimal coolant flow and engine thermal management.
LR2 L359
2008–2012
3.2L Petrol
Rubber Compound
Upper & Lower Variants
OE Direct Fit
Overview
The Freelander LR2 L359's cooling system demands precision engineering and robust materials to handle demanding terrain and variable climates. Over time, original radiator hoses degrade from engine heat, UV exposure, and pressure cycles, leading to leaks, reduced coolant circulation, and potential engine overheating—a costly failure on any Land Rover expedition.
This OE-quality replacement hose set (upper and lower) is manufactured to original equipment specifications using premium rubber compounds formulated to withstand high-temperature coolant flows, internal pressure, and environmental stress. Both hoses are direct replacements for factory originals, featuring identical fitment geometry and integrated connection points.
Restoring your LR2's cooling efficiency protects engine longevity, maintains consistent operating temperatures, and prevents catastrophic thermal damage—essential for reliability on and off-road.
What's Included
🔧
Upper Radiator Hose
OE Part LR000931 – Thermostat outlet to radiator inlet
🔧
Lower Radiator Hose
OE Part LR007413 – Radiator outlet to water pump return
✓
Direct Fit Geometry
No modification required; factory-correct routing and attachment points
📦
12-Month Warranty
Full coverage against manufacturing defects and material failure
Product Highlights
- OE-equivalent rubber formulation rated for 120 °C sustained coolant temperatures
- Precision-moulded internal baffles and reinforcement prevent kinking and flow restriction
- Factory fitment: no adapters, no modifications, no guesswork
- Upper and lower hoses designed as a matched pair for optimal circulation balance
- PT-origin manufacturing meets Land Rover engineering tolerances
- Corrosion-resistant fittings and connection sleeves for long service life
- Compatible with OEM coolant and aftermarket long-life alternatives
- Cross-referenced to GATES, RAPRO, THERMOTEC, and VAICO OE-equivalent standards
- Tested for pressure cycling durability (100,000+ pressurisation cycles)
- Professional-grade quality without premium pricing
Compatibility
| Variant |
Model & Year |
Engine |
Part No. |
Fit |
| Upper Hose |
Freelander LR2 2008–2012 |
3.2L Petrol (TDV6 excluded) |
LR000931 |
Direct Fit |
| Lower Hose |
Freelander LR2 2008–2012 |
3.2L Petrol (TDV6 excluded) |
LR007413 |
Direct Fit |
| Lower Hose (Alt.) |
Freelander LR2 2008–2012 |
3.2L Petrol |
LR005294 |
Direct Fit |
| Diesel Models |
Freelander LR2 TDV6 |
2.7L/3.0L Diesel |
N/A |
Not Compatible |
⚠️ Engine Confirmation: This hose set is engineered exclusively for the 3.2L petrol V6 variant. Diesel models (TDV6) use different routing and connection geometry. Confirm your engine type on your V5C registration or engine bay identification before ordering.
Installation Notes
Difficulty Level: Intermediate | Time: 1.5–2 Hours
-
Preparation: Allow engine to cool completely (minimum 2 hours). Disconnect negative battery terminal to disable electric coolant fans. Remove plastic engine cover if fitted.
-
Drain Coolant: Position a drain pan beneath the radiator. Open the bleed screw on top of the thermostat housing and lower radiator drain plug. Allow full system drainage.
-
Remove Upper Hose: Unclip two hose clamps (thermostat end and radiator inlet). Gently twist and withdraw hose. Inspect radiator and thermostat housing connections for debris or damage.
-
Remove Lower Hose: Unclip radiator outlet clamp and water pump inlet clamp. Support radiator slightly if necessary for access. Remove hose.
-
Install Lower Hose First: Slide new lower hose onto water pump return stub (inlet side). Secure with original hose clamp, positioning clamp band on reinforced section of hose. Tighten to hand-tight, then quarter-turn with screwdriver.
-
Connect Radiator Outlet: Route hose along original path, insert into radiator lower tank connection, and secure second clamp. Ensure hose does not contact sharp edges or hot surfaces.
-
Install Upper Hose: Connect thermostat outlet end first, then route hose to radiator top inlet. Secure both clamps using same technique (hand-tight + quarter-turn).
-
Refill & Bleed: Close drain plugs and reconnect hose clamps. Pour OEM or equivalent long-life coolant into expansion reservoir to "cold" level mark. Start engine with heating set to maximum, and run until upper hose warms and thermostat opens (fan may cycle). Top up coolant as level drops. Repeat until level stabilises and no air pockets remain.
-
Test Run: Run engine for 5 minutes in neutral. Check all hose connections, clamps, and floor beneath vehicle for leaks. Verify coolant level after cooling period (15 minutes).
-
Final Check: Refit engine cover. Reconnect battery. Perform a short test drive and re-inspect connections upon return.
⚠️ Coolant Safety: Never open coolant system on a hot engine—internal pressure can cause severe scalding. Always work with a fully cooled system. Use only approved automotive coolant; mixing coolant types or using water alone will compromise thermal performance and accelerate component corrosion. Dispose of old coolant responsibly at a certified recycling facility; do not pour down drains.
Ready to Restore Cooling System Reliability?
Premium OE-quality radiator hoses engineered for your Freelander LR2. Backed by our 30-day money-back guarantee and 12-month warranty. Ships worldwide via DHL, FedEx, or UPS.
Shop Cooling System Parts
Use code 22GET20 for 20% off any 2 items
✓ 4.9/5 Stars – 12,300+ verified reviews
✓ 30-Day Money-Back – no questions asked
✓ Worldwide Shipping – DHL, FedEx, UPS, TNT
✓ Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm)
Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed to be compatible with the specified vehicle and engine type; always verify fitment before purchase. Installation should be performed by a qualified technician. Improper installation may void vehicle warranty. Use of this product constitutes acceptance of all terms and conditions outlined in our warranty and returns policy.
