Partsmost · Land Rover Freelander · Cooling System
Upper Radiator Coolant Hose for Land Rover Freelander 2 L359 (2008–2012) – 3.2L Petrol
OEM-spec replacement hose engineered to maintain optimal coolant flow and thermal stability under demanding conditions.
L359
2008–2012
3.2L Petrol
Upper Radiator
Rubber Reinforced
OEM LR000931
Overview
The Land Rover Freelander 2 (L359) represents a turning point in affordable Land Rover ownership. Its 3.2-litre petrol engine delivers reliable power across diverse driving conditions, from urban commutes to light off-road work. But like all modern cooling systems, it depends on precision-engineered hoses to regulate thermal load and prevent catastrophic overheating.
This upper radiator coolant hose is the direct replacement for the factory component (OEM part number LR000931). Manufactured to the original equipment specifications, it features reinforced rubber construction designed to withstand high-pressure coolant flow, extreme temperature fluctuations, and the vibration cycles endemic to Land Rover platforms. Whether yours has developed cracks from age or hardened after years of use, this hose restores proper coolant circulation and thermal management.
Direct fit, OEM-quality construction, and 12-month warranty. Fits 3.2L petrol Freelander 2 models from 2008 through 2012. No cutting. No adapters. Plug-and-play reliability.
What's Included
🔧
Upper Radiator Hose
OEM LR000931 reinforced rubber
✓
Direct Fit
No modification required
🛡
12-Month Warranty
Parts replacement guarantee
🌍
Worldwide Shipping
DHL, FedEx, UPS, TNT
Product Highlights
- OEM-spec reinforced rubber construction resists pressure cycles and thermal stress
- Engineered for 3.2L petrol engines in Freelander 2 L359 (2008–2012)
- Direct replacement for factory part number LR000931 / LR0 00931
- Maintains consistent coolant flow under high-load driving conditions
- Resistant to hardening, cracking, and UV degradation over time
- Upper radiator position ensures proper expansion tank circulation
- Compatible with OEM coolant and aftermarket antifreeze blends
- Simple press-fit hose clamp connections (standard Land Rover fitment)
- Tested to withstand peak coolant temperatures and pressure surges
- New, unused part—full 12-month replacement warranty included
Compatibility
| Model |
Year |
Engine |
Fitment |
| Land Rover Freelander 2 |
2008 |
3.2L Petrol |
Direct Fit |
| Land Rover Freelander 2 |
2009 |
3.2L Petrol |
Direct Fit |
| Land Rover Freelander 2 |
2010 |
3.2L Petrol |
Direct Fit |
| Land Rover Freelander 2 |
2011 |
3.2L Petrol |
Direct Fit |
| Land Rover Freelander 2 |
2012 |
3.2L Petrol |
Direct Fit |
| Freelander 2 (Diesel, SD4, TDV6) |
2008–2012 |
Diesel |
Not Compatible |
| Freelander 1 (LN) |
1997–2006 |
All |
Not Compatible |
Verify fitment: Confirm your engine is the 3.2L petrol variant. Diesel-engined Freelander 2 models (SD4, TDV6) require a different hose assembly. Check your original part number or contact us before purchase.
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
-
Preparation: Allow the engine to cool completely. Disconnect the negative battery terminal.
-
Drain coolant: Place a drain pan beneath the radiator. Loosen the radiator drain plug (bottom-left). Coolant will flow—dispose responsibly.
-
Remove clamps: Locate the upper radiator hose. You'll find hose clamps at both ends (one at the radiator inlet, one at the thermostat housing). Loosen both clamps using a Phillips or flat-head screwdriver.
-
Disconnect hose: Gently twist and pull the old hose away from both connection points. Some coolant residue may drip—keep your drain pan positioned.
-
Install new hose: Slide the new hose onto both the radiator inlet fitting and the thermostat housing inlet. Push firmly until seated (you should feel a slight resistance).
-
Secure clamps: Position hose clamps approximately 1 cm (½ inch) from each end of the hose. Tighten firmly—not over-tight (risk of hose crushing).
-
Refill coolant: Close the radiator drain plug. Pour OEM or approved aftermarket coolant into the expansion tank until the level reaches the MIN/MAX mark. Do not overfill.
-
Bleed air: Replace the expansion tank cap. Start the engine and allow it to idle for 5 minutes. Turn off, wait 5 minutes, and recheck the coolant level. Top up if needed.
-
Test drive: Take a short, gentle drive (10 minutes) to circulate coolant through the new hose. Monitor dashboard temperature gauge—should remain in the normal range.
-
Final check: Stop, wait 5 minutes for cool-down, then inspect both hose connection points for leaks. Tighten clamps slightly if any seepage is visible.
Coolant hazard: Never work on the cooling system while the engine is hot or warm. Coolant under pressure can cause severe burns. Always allow a full cool-down (minimum 30 minutes after engine shutdown).
Ready to Restore Thermal Stability?
Replace your aging or damaged radiator hose with OEM-spec precision. Keep your Freelander 2 running cool, even in stop-and-go traffic or light off-road conditions. Order today—12-month guarantee included.
Add to Cart
Use code 22GET20 for 20% off any 2 items
✓ 30-day money-back guarantee
✓ 4.9★ 12,300+ reviews
✓ Worldwide shipping DHL, FedEx, UPS
✓ Expert support +44 203 943 9919
Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover PLC, or any official Land Rover distributor. All references to Land Rover models, trim names, and specifications are for compatibility identification only. Product specifications and fitment details are provided in good faith; buyers assume responsibility for verifying compatibility with their specific vehicle. Part numbers and OEM references are used for cross-reference only and do not imply OEM manufacture or approval.
