Easy Exhausts

Victorious · Range Rover Sport L494 · Exhausts Range Rover Sport SVR Quad Tip Exhaust Muffler – 2018–2019 Stainless steel quad exhaust trim covers that transform your Sport's rear end into a factory SVR look—premium aesthetics without the full system cost. L494 2018–2019 Stainless Steel Chrome & Black Adhesive Install Overview The Range Rover Sport L494 (2018–2019) has always been understated in its factory guise. This quad exhaust trim cover set elevates that presence immediately, channeling the aggressive visual language of the SVR performance variant while maintaining your existing exhaust system. Engineered from aerospace-grade stainless steel, these covers arrive pre-finished in either mirror-bright Chrome or Deep High Gloss Black, giving you the flexibility to match your Sport's signature look. The lightweight construction means zero impact on handling or fuel economy—this is pure aesthetic transformation. Installation takes under 30 minutes. The supplied automotive adhesive tape is engineered for temperature resilience and vibration absorption, ensuring these stays put through seasons of motorway and track use. No drilling, no modifications, no second-guessing. What's Included 🔲 Quad Exhaust Trim Pair Left and right stainless steel covers 📋 Automotive Adhesive Tape Pre-cut pads for secure bonding 📖 Installation Guide Step-by-step with prep checklist ✓ 30-Day Money Back If not completely satisfied Product Highlights Stainless steel construction resists corrosion and maintains finish for years SVR-inspired quad design transforms rear profile instantly Chrome and High Gloss Black finishes suit every Sport specification Lightweight—zero performance impact or fuel penalty Pre-cut adhesive tape simplifies alignment and bonding Temperature-resistant adhesive handles UK heat cycles and freeze No drilling or modification to original bodywork required Direct fit for L494 Sport 2018–2019 models only Vibration-damped backing prevents rattle and movement 30-day satisfaction guarantee—risk-free investment Fitment & Compatibility Model & Year Generation Compatibility Range Rover Sport 2018–2019 L494 Direct Fit Range Rover Sport 2013–2017 L494 Not Compatible Range Rover Sport 2020+ L460 / New Gen Not Compatible Range Rover Vogue (All) L460 / L405 Not Compatible Range Rover Evoque (All) L538 / L551 Not Compatible Note: This product is designed exclusively for 2018–2019 Range Rover Sport L494 models. If you own a 2020+ Sport, view our L461 collection here. Installation DIY Difficulty: Beginner | Time: 20–30 minutes Prepare the surface: Clean the existing exhaust outlet area thoroughly with a microfibre cloth and isopropyl alcohol. Allow to dry completely (5 minutes minimum). Heat the adhesive: Use a heat gun or hair dryer on medium setting to gently warm the adhesive tape backing for 30–45 seconds. This activates the polymer bonding agents. Align carefully: Position the left trim cover first, ensuring it sits flush with the exhaust outlet edge. Use the installation guide as a visual reference. Apply firm pressure: Press down for 10–15 seconds along the entire surface, working from centre outward to remove air pockets. Repeat for right side: Follow steps 2–4 for the passenger-side cover, maintaining symmetry. Cure time: Leave untouched for 24 hours before first drive. This allows full adhesive cross-linking. Important: Do not expose the vehicle to high-temperature exhaust fumes for 48 hours post-installation. Allow adhesive to fully cure before towing or aggressive driving. Heat activation of the adhesive tape is critical for long-term durability. Ready to Elevate Your Sport? Transform your 2018–2019 Range Rover Sport into the aggressive, visual heavyweight it deserves to be. These quad exhaust trims deliver SVR-level stance without compromise. Shop Quad Exhaust Trims Use code 22GET20 to save 20% when ordering 2+ items from our Sport collection. 4.9★ 12,300+ verified reviews ✓ 30-day money back 🚚 Worldwide delivery 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names and vehicle designations are used for identification purposes only. Installation of this product does not void your manufacturer warranty, though fitment by a qualified technician is recommended. Always verify fitment with your specific VIN before ordering.

Victorious · Range Rover Sport L494 · Exhaust 2020 Range Rover Sport SVR Style L494 Quad Tip Exhaust & Muffler – Sleek Black Design Elevate your Range Rover Sport's rear presence with an aggressive SVR-inspired quad exhaust system in premium gloss black. L494 2013–2020 Stainless Steel Dual Exhaust SVR Style High Gloss Black Overview The Range Rover Sport L494 (2013–2020) has always demanded a bold presence. Factory exhaust systems play it safe—this quad-tip system doesn't. Inspired by the high-performance SVR variant, this upgrade transforms the rear quarter in one go, delivering the stance and aggression your Sport deserves. Engineered from premium stainless steel and finished in deep high-gloss black, the dual-piece construction fits cleanly beneath the bumper, protecting your original muffler while creating a commanding visual impact. Laser-cut precision ensures zero gaps and a factory-tight finish every time. Installation is straightforward—adhesive tape and heat do the work for you. No welding, no fabrication, no compromise. Whether you're running a standard Sport or an SVR, this system adds the performance aesthetic your vehicle demands. What's Included 🏁 2× Exhaust Trim Covers Left and right quad-tip sections in high-gloss black. 🔧 Professional Adhesive Tape High-temp rated for secure, permanent bonding. Product Highlights SVR-inspired quad-tip design for aggressive aesthetics Premium stainless steel construction for longevity High-gloss black finish resists weathering and fading Laser-cut precision ensures perfect fitment Protects and enhances your original exhaust system Easy installation with included adhesive tape Professional finish—no welding or fabrication required Heat-activated adhesive for maximum bond strength Dual-piece design fits L494 factory bumper contours Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Variant Fitment Status 2013–2019 Range Rover Sport L494 Standard Direct Fit 2020 Range Rover Sport L494 Standard Direct Fit 2013–2020 Range Rover Sport L494 SVR Not Compatible Range Rover Sport L320 (2005–2013) Not Compatible Range Rover Sport L461 (2022+) Not Compatible Installation Difficulty: Easy | Time: 30–45 Minutes Clean the rear bumper area thoroughly with soap and warm water. Dry completely. Position the left exhaust trim cover over the factory muffler tip. Ensure alignment with bumper contours. Apply the high-temp adhesive tape to the reverse side of the trim cover. Warm the adhesive tape with a heat gun (150–180°C) for 10–15 seconds to activate the bond. Press the trim cover firmly against the muffler for 30 seconds while the adhesive sets. Repeat steps 2–5 for the right-side cover. Allow 24 hours full cure time before driving or washing the vehicle. Important: Do not install on SVR models—the exhaust geometry differs. Ensure bumper surface is clean and dry for optimal adhesion. Use moderate heat only; excessive temperature may damage plastic bumper trim. Transform Your Sport Today The difference between a standard Range Rover Sport and one that commands attention comes down to details. This quad-tip exhaust system is that detail. Premium finish, precise fit, backed by our promise. Shop Range Rover Sport L494 Save 20% on any two Victorious products with code 22GET20 ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 UK support: +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket parts specialist and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All vehicle names and logos are the property of their respective manufacturers. This product is designed to fit the specified vehicle model(s) and is sold as an accessory enhancement only.

Victorious Automotive · Range Rover Velar · Exhaust & Muffler Covers Stainless Steel Quad-Look Exhaust Pipe Cover — Range Rover Velar SVR Style (2017–2019) Transform your Velar's rear end with a genuine SVR quad-exhaust aesthetic — precision-formed from 304-grade stainless steel and finished in chrome or high-gloss black, sold as a pair. Range Rover Velar 2017–2019 304 Stainless Steel Chrome & Gloss Black Quad SVR Look No Drilling Required Sold as Pair ISO 9001 Certified Overview The Range Rover Velar sits at the sharp end of Land Rover's design language — a vehicle built as much for aesthetic impact as it is for road presence. But for owners who want to push that presence further, the standard single-exit exhaust finish is a known visual shortcoming compared to the full-fat SVR specification models that leave the factory with an assertive quad-pipe arrangement. These stainless steel exhaust pipe covers are engineered specifically for the Velar (2017, 2018, 2019), slipping over your existing exhaust tips to deliver the commanding quad-outlet SVR look without modification to your exhaust system. Manufactured from ISO 9001-certified 304-grade stainless steel, each cover is precision-formed, mirror-polished, and built to withstand the heat, moisture and road conditions your Velar will face year-round. Available in classic chrome silver or high-gloss black, the covers attach securely via automotive-grade adhesive tape that is included in the set. The result is a rear end transformation that is virtually indistinguishable from the factory SVR specification — at a fraction of the cost and without touching a single bolt on your vehicle. What's Included 🔩 Exhaust Pipe Covers × 2 Left and right matched pair, quad SVR-style profile 🖤 Finish Choice Mirror chrome or high-gloss black — select at checkout 🧲 Automotive Adhesive Tape High-bond, heat-resistant double-sided tape pre-applied 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Achieves the full SVR quad-exhaust look on standard Velar models 304-grade stainless steel construction — corrosion and heat resistant ISO 9001 certified manufacturing for consistent quality and finish Available in mirror chrome silver or high-gloss black lacquer Protects your original OEM exhaust tips from road debris and corrosion Sold as a matched left and right pair for a symmetrical finish No drilling, cutting or exhaust modification required Includes premium automotive-grade adhesive tape for a lasting bond Designed and profiled specifically for the Velar rear bumper recess Virtually indistinguishable from factory SVR specification at the rear Compatibility Vehicle Year Range Trim / Notes Fitment Range Rover Velar (L560) 2017 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2018 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020–2022 Post-facelift — verify bumper profile before ordering Verify First Range Rover Velar SVR 2017–2019 Already has factory quad exhausts Not Required Range Rover Sport L494 2013–2020 Different bumper profile Not Compatible Range Rover Vogue L405 2013–2020 Different exhaust layout Not Compatible Installation Notes 🛠 DIY Fit · Difficulty: Easy · Estimated Time: 20–30 Minutes Ensure the rear bumper and existing exhaust tip surrounds are clean, dry and free from grease, wax or polish — use an isopropyl alcohol wipe for best adhesion. Dry-fit each cover in position before applying adhesive to confirm alignment and check the cover sits flush and level within the bumper recess. Using a lighter or heat gun, gently warm the adhesive tape on the reverse of each cover for 5–10 seconds — this activates the bond and significantly improves adhesion strength. Carefully press each cover firmly into position, applying steady pressure across the entire surface for 30–60 seconds to ensure full contact with the mounting surface. Allow the adhesive to cure for a minimum of 24 hours before driving or exposing the vehicle to rain. Avoid pressure washing the area for 48 hours after fitting. ⚠ Important: Do not apply covers to a warm or recently used exhaust. Allow the vehicle to cool completely before fitting. Always clean the bonding surface thoroughly — contamination is the primary cause of adhesive failure. If ambient temperature is below 10°C, warm both the cover and the bumper surface gently before application. Complete the SVR Look on Your Velar These exhaust covers are one of the most impactful and cost-effective upgrades available for the Range Rover Velar. Pair them with our rear diffuser trims, door handle covers or chrome surrounds to take the exterior finish even further. Shop All Range Rover Velar Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, trademarks and references are used for fitment identification purposes only. SVR is a trademark of Jaguar Land Rover Limited.

Victorious · Range Rover Sport · Exterior Styling Stainless Steel Black Exhaust Pipe Cover – Range Rover Sport P400 (2018–2021) Transform silver exhaust tailpipes to premium satin black with precision-fit, adhesive-backed covers—no tools, no drilling required. L494 P400 2018–2021 Stainless Steel Peel & Stick ISO 9001 Certified Overview If you drive a 2018–2021 Range Rover Sport P400 (New Energy), your stock silver exhaust tailpipes are likely the only unfinished element on an otherwise refined exterior. This stainless steel cover transforms those polished pipes into sleek satin black in minutes—no modification, no permanent change, pure aesthetic upgrade. Each cover is precision-engineered for the P400's 18–21mm exhaust diameter. The 300g stainless steel construction resists corrosion, heat, and weather while maintaining a perfectly matte black finish that complements modern Range Rover Sport design language. The factory-applied automotive adhesive tape eliminates the need for tools; installation is literally peel, align, and press. Backed by ISO 9001 certification and tested for durability under real-world conditions, this accessory represents the small details that separate a cared-for Range Rover from the rest. It's the kind of subtle upgrade that catches every eye at a standstill. What's Included ⚙️ Exhaust Pipe Covers (Pair) Precision-fit stainless steel, satin black ✓ Pre-Applied Adhesive Tape Industrial automotive-grade, ready to install 📋 Installation Guide Step-by-step with surface prep tips 🛡️ 30-Day Money-Back Guarantee Full refund if not satisfied, no questions Product Highlights Stainless steel construction resists rust, salt, and high exhaust heat Satin black finish matches modern Range Rover Sport design intent Precision-engineered for 18–21mm P400 tailpipes (2018–2021 models) Pre-applied industrial automotive adhesive—no tools or drilling required ISO 9001 certified manufacturing for consistent quality and durability Reversible installation; can be removed without damage to original pipes Lightweight at 300g per pair, negligible vehicle impact Heat-resistant and corrosion-resistant for long-term outdoor exposure Easy to clean with standard automotive detailing products Backed by Victorious 30-day satisfaction guarantee and 4.9★ customer reviews Compatibility Model Year Range Engine Compatibility Range Rover Sport (New Energy) 2018–2021 P400 (PHEV) Direct Fit Range Rover Sport (L494) 2018–2021 P575 Supercharged Not Compatible Range Rover Sport (L494) 2018–2021 P440 / P440e Not Compatible Range Rover Sport (L494) 2022–2026 (L461) All Models Not Compatible Range Rover Vogue (All Gens) 2013–2026 All Not Compatible Note: This cover is exclusively engineered for the P400 New Energy (PHEV) exhaust diameter. Other Sport and Vogue models have different tailpipe sizes and require different covers. Verify your model year and engine variant before ordering. Installation Difficulty Level: Beginner | Time: 5–10 minutes Clean the tailpipes thoroughly. Use warm soapy water and a microfibre cloth to remove dirt, brake dust, and residue. Dry completely with a clean towel. Any surface contamination will reduce adhesive bond strength. Inspect the adhesive backing. Peel back a small corner of the protective film to confirm the adhesive is intact and even. Do not fully remove until you're ready to apply. Align the cover over the tailpipe. Position the cover so it sits centred on the exhaust opening. Use your fingers to guide it into place—no force needed. Peel and press firmly. Slowly remove the adhesive backing while pressing the cover against the pipe with steady, even pressure for 30–45 seconds per cover. Press the edges. Run your finger around the perimeter to ensure all edges are firmly bonded, paying special attention to the top and bottom seams. Allow 24 hours to cure. Avoid driving or exposing the covers to water for at least 24 hours to allow the adhesive to set fully. ⚠️ Important: Do not install in direct sunlight or extreme heat. If the pipes are warm, allow them to cool to room temperature first. Adhesive performance is best at 15–25°C. If you live in a very hot climate, install in the early morning or late evening. Why Choose Victorious? We've been specialising in Land Rover and Range Rover accessories since 2015. Every product is selected for quality, tested in the field, and backed by our 30-day money-back guarantee. With 12,300+ verified reviews at 4.9★, we're trusted by Range Rover owners across 47 countries. This exhaust cover is ISO 9001 certified, precision-fitted to your P400, and comes with straightforward installation instructions. We also offer worldwide shipping via DHL, FedEx, UPS, or TNT—because we know where you live shouldn't limit your options. Ready to Upgrade Your Exhaust? Transform your Range Rover Sport P400 in under ten minutes. No tools. No mess. Just premium black tailpipes that look like factory intent. Add to Cart Order 2 or more items and use code 22GET20 for 20% off your entire order. 📞 Live Support: +44 203 943 9919 🚚 Worldwide Shipping: DHL, FedEx, UPS, TNT ✓ 30-Day Guarantee: Full refund, no questions ⭐ 4.9/5 Stars: 12,300+ verified reviews Victorious Automotive is an independent accessory specialist and is not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover plc. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility is based on OEM specifications and field testing; fitment assumes standard factory exhaust configurations and proper installation. Modification or incorrect installation may void vehicle warranty. Always consult your vehicle manual and Land Rover dealer if unsure.

BMW · X5 G05 & X7 G07 · Exhaust Trim Quad Exhaust Muffler Pipe Trim Upgrade – BMW X5 G05 & X7 G07 (2019–2023) Premium stainless steel quad exhaust trim that transforms your BMW's rear aesthetic with aggressive, high-performance styling. G05 / G07 2019–2023 Stainless Steel Quad Exhaust Easy Install ISO9001 Certified Overview The BMW X5 G05 and X7 G07 are precision-engineered luxury SUVs that command attention on any road. This quad exhaust muffler pipe trim upgrade elevates their rear profile, adding a layer of sportiness and visual aggression that rivals factory M-sport packages. Crafted from premium grade stainless steel, this two-piece trim set mirrors the exhaust architecture of higher-specification BMW models, delivering that coveted dual-quad outlet aesthetic. Whether you choose the refined shiny silver or bold high-gloss black finish, the result is an understated yet purposeful enhancement that catches light and eyes alike. Installation is straightforward thanks to included high-quality adhesive tape—no drilling, welding, or permanent modifications required. Perfect for owners who want tangible visual impact without compromise to originality. What's Included ✓ 2-Piece Exhaust Trim Set One complete quad outlet solution 🔧 High-Grade Adhesive Tape Professional-strength automotive grade 📋 Installation Instructions Step-by-step guidance included 🛡️ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights Precision-engineered quad exhaust aesthetic for 2019–2023 X5 G05 & X7 G07 Grade-A stainless steel resists corrosion and maintains factory-fresh finish Available in shiny silver and high-gloss black—choose your statement ISO9001 certified manufacturing ensures quality and durability Adhesive tape installation—reversible, no permanent modifications Lightweight at 500g per set—zero impact on handling or performance Dimensions optimised: 35cm length × 17cm width × 5cm height Mirrors OEM M-sport styling for premium visual upgrade Heat-bond ready—improved adhesion when tape is pre-warmed Turn-key solution that elevates rear-end presence instantly Compatibility Vehicle Model Year Range Status BMW X5 G05 2019–2023 Direct Fit BMW X7 G07 2019–2023 Direct Fit BMW X5 G05 (Prior Gen) Pre-2019 Not Compatible BMW X7 G07 (Prior Gen) Pre-2019 Not Compatible Installation & Care Difficulty: Beginner | Time: 15–20 minutes Clean the rear bumper area thoroughly with mild soap and water. Allow to dry completely (15–20 minutes minimum). Lightly sand the adhesive area on the exhaust trim backing with 180–220 grit sandpaper for improved bond. Gently warm the included adhesive tape using a heat gun or hair dryer on medium setting for 10–15 seconds to improve tackiness. Carefully align the trim pieces around your exhaust outlets, ensuring both are centred and level before final adhesion. Press firmly onto the bumper for 30 seconds per piece, then allow 24 hours for full cure before exposing to moisture. For removal, gently prise up a corner and carefully peel back—residue can be cleaned with rubbing alcohol. Note: Do not apply tape to wet, dusty, or cold bumpers. Optimal adhesion occurs between 15–25°C. Avoid car washes for 48 hours post-installation. Complete Your BMW Transformation Small details define great cars. This quad exhaust trim upgrade is one such detail—understated, purposeful, and undeniably effective. Order now with confidence backed by our 30-day guarantee. Shop Exhaust Trims Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for fitment to the specified vehicle models. Always verify compatibility with your vehicle's specific year and build configuration before purchase.

Victorious Automotive · Range Rover Sport · Exhaust & Styling SVR Style Exhaust Muffler Tips for Range Rover Sport — Stainless Steel Rear Tail Pipe Set Transform the rear end of your Range Rover Sport with SVR-inspired stainless steel exhaust muffler tips — a direct, no-paint upgrade that delivers factory-sport presence without factory-sport costs. Range Rover Sport SVR Body Kit Compatible Stainless Steel 304 2 Piece Set Rear Mounting 7.0cm Inlet Part No. MQL-202 Silver Finish Resistance Muffler Type 4KG Total Weight Overview The Range Rover Sport has always struck a rare balance between commanding road presence and genuine performance intent. Whether you're running the L494 or an earlier generation fitted with an SVR body kit, the rear of the vehicle is one of the most visible indicators of that sporting character — and the exhaust tips are central to that impression. Stock exhausts on non-SVR variants often appear understated by comparison, leaving the rear aesthetic feeling unfinished next to an otherwise purposeful body. These SVR Style Exhaust Muffler Tips are precision-formed from Grade 304 stainless steel, offering the aggressive quad-outlet visual language of the full SVR without any permanent modification to your vehicle. The polished silver finish catches light at every angle, complementing the Sport's bold shoulder lines and rear diffuser design. At 4KG total for the pair, they feel substantive and premium — not hollow or lightweight afterthoughts. Designed specifically for Land Rover models fitted with the SVR body kit, the tips feature a 7.0cm inlet diameter and rear mounting position, integrating cleanly with your existing exhaust system. No painting. No cutting. No specialist tools required — though professional fitting is always recommended for the cleanest result. These are a meaningful visual upgrade executed in the right material, for owners who know the difference. What's Included 🔧 Exhaust Muffler Tips × 2 Matched pair, stainless steel 304, silver polished finish 📦 Protective Packaging Securely boxed for international transit via DHL, FedEx, UPS or TNT 📋 Product Reference Card Part number MQL-202 for warranty and fitment reference Note: No printed installation guide is included. Professional installation is strongly recommended. Product Highlights Grade 304 stainless steel construction for lasting corrosion resistance SVR-inspired dual-outlet design per side — four tips total visual effect Polished silver finish — no painting required, ready to fit 7.0cm inlet diameter for a secure, rattle-free fit Resistant to UV, water, road salt, grease, oil and mild acids Lightweight relative to its solid feel — just 4KG for the full pair Rear mounting position matches OEM SVR exhaust outlet placement No permanent modification to your exhaust system required Compatible with Range Rover Sport models fitted with SVR body kit Adds a genuine sporty presence without aggressive or over-styled aesthetics Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Sport with SVR Body Kit L494 2013–2020 Direct Fit Range Rover Sport SVR L494 2014–2020 Direct Fit Range Rover Sport with SVR Body Kit L461 2022–2026 Verify Fitment Range Rover Sport (Standard — No SVR Kit) L494 / L461 All Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Land Rover Defender L663 L663 2020–2026 Not Compatible Range Rover Evoque L538 / L551 All Not Compatible These tips are designed for vehicles fitted with the SVR body kit. If you're unsure whether your vehicle qualifies, contact us on +44 203 943 9919 before ordering. Installation Notes 🔩 Installation Overview Difficulty: Moderate  |  Estimated Time: 45–90 minutes  |  Tools: Basic hand tools, hose clamps or exhaust clamps Ensure the vehicle is parked on a flat surface and the exhaust system has fully cooled before beginning work. Measure your existing exhaust pipe outlet diameter to confirm compatibility with the 7.0cm inlet size of these tips. Clean the rear exhaust pipe ends thoroughly, removing any carbon build-up, rust or debris that could prevent a secure fit. Slide each muffler tip over the corresponding exhaust outlet, positioning it so the face of the tip aligns flush with the rear bumper cutout. Secure each tip using appropriate exhaust clamps, tightening evenly to prevent any lateral movement or vibration noise. Start the vehicle and allow it to idle for a few minutes. Inspect for any movement, rattling or exhaust leaks around the inlet joint. Once satisfied, give the tips a final wipe down with a microfibre cloth to remove any fingerprints before the steel fully heats and sets. ⚠ Important: No installation guide is included with this product. Professional installation is strongly recommended. Incorrect fitting may result in noise, vibration or damage to the exhaust system. Always allow exhaust components to fully cool before handling. Built for Range Rover Sport Owners Who Don't Compromise These SVR style exhaust tips are one of the most cost-effective ways to complete the rear styling of your Range Rover Sport. Explore our full collection of Range Rover Sport accessories — or call our team if you'd like personalised fitment advice. Shop Range Rover Sport L494 Accessories Shop Range Rover Sport L461 Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious · Range Rover Sport L494 · Exhaust 2020 Range Rover Sport L494 Exhaust Muffler with SVR Quad Tips – Silver Premium stainless steel quad-tip exhaust trim that transforms your Sport's rear end with commanding visual presence and lasting durability. L494 2013–2020 Stainless Steel SVR Quad Tips Adhesive Install Silver Finish Overview If you own a 2020 Range Rover Sport L494, you understand that this generation of the Sport demands presence. Every detail matters—and few details carry the visual weight of a muscular exhaust treatment. Our SVR-inspired quad-tip muffler trim is engineered specifically for the L494 chassis to deliver that high-performance look without compromise. Crafted from premium grade stainless steel, this exhaust trim cover protects your original muffler while presenting a sleek, aggressive aesthetic that commands attention. The quad-tip design echoes the motorsport DNA of Range Rover's performance lineup, instantly elevating your Sport's character. Unlike generic covers, this is laser-cut for pixel-perfect fitment on your 2020 model. Installation is straightforward using high-quality automotive adhesive tape. The silver finish coordinates beautifully with most Sport configurations, catching light and adding depth to the rear quarter. Backed by our 30-day money-back guarantee, you're investing in a proven accessory trusted by thousands of Range Rover enthusiasts worldwide. What's Included ✦ Pair of Exhaust Trim Covers Stainless steel, laser-cut for L494 ✦ Automotive Adhesive Tape High-strength bonding, pre-cut ✦ Installation Guide Step-by-step instructions included ✦ Cleaning Prep Materials Surface preparation cloth included Product Highlights SVR-inspired quad-tip design for authentic performance character Premium grade 304 stainless steel—corrosion and UV resistant Laser-cut for exact L494 fitment with zero guesswork Silver finish complements factory wheels and trim accents Protects original muffler from wear, oxidation, and damage High-strength automotive adhesive tape for permanent hold Easy installation—no cutting or modification required Sophisticated alternative to chrome plating Tested in real-world UK climate conditions Backed by Victorious 30-day money-back guarantee Compatibility Vehicle Model Year Range Generation Fitment Range Rover Sport 2013–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 (New) Not Compatible Range Rover Vogue L405 2013–2020 L405 Not Compatible Range Rover Velar 2018–2022 L560 Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 Minutes Prepare the surface: Clean the rear muffler area thoroughly with the included prep cloth. Remove any dirt, dust, or residue. Allow to dry completely. Heat the adhesive tape: Gently warm the adhesive tape using a heat gun (or warm (not hot) hairdryer on medium setting for 20–30 seconds per section. This activates the bonding agent. Position the trim: Carefully align the quad-tip trim cover with the muffler opening. Start at the center and work outward to avoid air bubbles. Apply pressure: Press firmly along the entire length of the trim, ensuring even contact for 30–60 seconds per section. Allow cure time: Wait a minimum of 4 hours before exposing the muffler to heat or driving. Full bond strength develops over 24 hours. Important: Do not apply tape or trim in temperatures below 10°C (50°F). Cold adhesive will not activate properly. If your climate is cool, allow the vehicle (and adhesive tape) to reach room temperature indoors before installation. Transform Your Sport's Presence The rear quarter of your Range Rover Sport deserves a finish that matches its engineering. This SVR-inspired quad-tip trim is the easiest way to inject visual drama and protect your original muffler all at once. Shop Range Rover Sport L494 Exhausts Use code 22GET20 for 20% off any 2 items 4.9/5 Stars — 12,300+ verified reviews 30-Day Guarantee — Money back, no questions Worldwide Shipping — DHL, FedEx, UPS, TNT Expert Support — +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent specialist retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover dealership. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility and fitment are based on manufacturer specifications and real-world testing. Always verify fitment before purchase. Victorious Automotive accepts no liability for incorrect fitment or installation damage. Refer to your vehicle's owner's manual for specific guidance.

Premium Automotive · Mercedes-Benz CLS · Exhaust & Aerodynamics CLS Class Carbon Fiber Rear Lip Diffuser Spoiler – W218 2011–2019 Premium carbon fibre diffuser and stainless steel quad exhaust tips that elevate your CLS's presence and performance aesthetics. W218 CLS350 / CLS63 AMG 2011–2019 Carbon Fibre + Stainless Steel Rear Diffuser Quad Exhaust Tips Screw Installation Overview The Mercedes-Benz CLS Class W218 is an icon of understated luxury and dynamic design. From 2011 through 2019, both the CLS350 and the thunderous CLS63 AMG set the standard for four-door coupé elegance. Yet the factory rear end, while refined, often leaves enthusiasts wanting more visual aggression and performance presence. This CAARFAC CLS Class Carbon Fibre Rear Lip Diffuser Spoiler transforms that space with purpose-built aerodynamics and authentic material quality. Real carbon fibre construction paired with premium stainless steel quad exhaust tips delivers the aggressive stance your CLS deserves—without the questionable replica aesthetic of lesser alternatives. Every screw attachment is engineered for clean fitment across the full W218 generation. Whether you're driving a measured CLS350 or the high-octane CLS63 AMG, this diffuser sharpens your vehicle's rear profile, improves downforce, and signals intent. It's the finishing touch that separates owned cars from cars that own their drivers. What's Included 🚗 Carbon Fibre Rear Diffuser Genuine woven carbon with protective clear coat. Direct fit, screw-mount design. ⚙️ Quad Stainless Steel Exhaust Tips Grade 304 stainless construction. Polished finish, corrosion-resistant, 4-outlet configuration. 🔧 Stainless Steel Fastening Hardware Complete screw set and mounting brackets. Pre-drilled for precision alignment. 📦 Premium Carton Packaging Protective foam lining. Damage-resistant transit protection. Product Highlights Carbon fibre construction provides authentic durability and weight efficiency Stainless steel exhaust tips resist corrosion and maintain polish over years Direct fit for W218 CLS350 and CLS63 AMG (2011–2019 model years) Aggressive rear diffuser profile enhances downforce and aerodynamic balance Screw-mount installation allows clean removal without permanent modification Quad exhaust outlet design complements factory dual exhaust systems Premium woven carbon with clear coat UV and impact protection CE certified construction meets EU material and safety standards Transforms rear bumper appearance with purposeful, aggressive stance Complete kit—no additional parts required for full installation Compatibility & Fitment Vehicle Model Model Years Engine Variant Fitment Mercedes-Benz CLS350 2011–2019 3.5L V6 & V8 variants Direct Fit Mercedes-Benz CLS63 AMG 2011–2019 5.5L Twin-Turbo V8 Direct Fit CLS550, CLS500 2011–2019 4.6L / 5.5L engines Direct Fit Other Mercedes models Any year N/A Not Compatible Installation Guide Difficulty Level: Intermediate | Time: 2–3 hours Safety First: Park on level ground. Engage handbrake. Disconnect negative battery terminal. Remove Rear Bumper Cover: Open boot. Locate and unbolt fasteners securing bumper trim to body. Gently remove factory rear bumper cover. Inspect Mounting Points: Clean rear diffuser mounting surface of any dirt, debris, or old adhesive residue. Allow to dry completely. Position Carbon Fibre Diffuser: Align diffuser with factory mounting holes. Check gap alignment with bumper edge on both sides before fastening. Secure Diffuser: Install stainless steel screws through provided mounting bracket. Tighten evenly in a cross pattern. Do not over-torque—finger-tight plus one-quarter turn. Install Exhaust Tips: Position quad exhaust tips into diffuser outlets. Verify alignment with factory exhaust pipe centerlines. Secure with provided fasteners. Final Check: Verify all fasteners are snug. Reinstall bumper cover. Reconnect battery terminal. Test for any loose components. Cure Time: Allow 24 hours before highway driving to settle adhesive and fasteners. ⚠️ Installation Note: If your CLS has a factory rear diffuser or aggressive bumper lip, minor trimming or adjustment may be required. Consult a certified Mercedes technician if unsure. Do not force fitment. Ready to Elevate Your CLS? This carbon fibre rear diffuser and quad exhaust system isn't just a visual upgrade—it's a statement that your Mercedes-Benz CLS demands the finest finishing touches. Genuine materials. Precision engineering. Uncompromising style. Add to Cart Use code 22GET20 for 20% off when you purchase any 2 items. ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ 4.9/5 Stars – 12,300+ Verified Reviews ✓ Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent automotive accessory specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes-Benz distributor. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product descriptions, specifications, and fitment information are provided for reference only. Always verify fitment with your vehicle's documentation or consult a certified technician before purchase.

Victorious Automotive · Land Rover Discovery 5 · Exterior Trim Land Rover Discovery 5 L462 Exhaust Tail Pipe Trim Cover — Muffler Surround Finisher 2017–2020 A precision-formed ABS tail pipe trim cover that restores the rear end of your Discovery 5 L462 with a clean, factory-complementing finish — no tools, no mess, no compromise. Discovery 5 L462 2017–2020 ABS Plastic Exhaust Finisher Tail Pipe Cover Muffler Trim 3M Adhesive No Drilling ISO 9001 Certified Direct Fit Overview The Land Rover Discovery 5 L462 is one of the most capable and refined family SUVs ever built — a genuine all-terrain machine dressed in contemporary, purposeful styling. From its sculpted flanks to its commanding rear end, every detail matters to owners who take pride in keeping their vehicle looking as good as it performs. The rear bumper area, however, is one zone that can begin to look tired over time, with exposed exhaust outlets and plastic surrounds that fade or attract road grime. This Exhaust Tail Pipe Trim Cover is a direct-fit exterior finisher designed specifically for the Discovery 5 L462 (2017–2020). Moulded from high-quality ABS plastic and finished to complement the vehicle's factory rear styling, this cover frames the exhaust outlets with a clean, structured surround that elevates the overall rear aesthetic. It sits flush against the bumper with precision-matched contours, hiding unsightly gaps and worn plastic while giving the tail end of your Discovery a purposeful, dressed appearance. Installation requires no drilling, no cutting, and no mechanical experience. Pre-applied 3M automotive-grade adhesive tape is included, making this a straightforward upgrade that can be completed in minutes. Whether you're refreshing a daily driver or detailing a show vehicle, this trim cover delivers a noticeably cleaner finish for minimal outlay. What's Included 🔲 Tail Pipe Trim Cover Set Pre-formed ABS surrounds for exhaust outlets 🔧 3M Adhesive Tape Pre-applied automotive-grade bonding tape 📄 Fitting Guidance Basic installation reference included Product Highlights Precision-moulded specifically for the Discovery 5 L462 chassis High-quality ABS plastic construction — durable and impact resistant Pre-applied 3M automotive adhesive for a secure, clean bond No drilling, cutting or modification required for fitting Frames and conceals exhaust outlets for a smarter rear appearance Flush fitment that mirrors factory rear bumper contours ISO 9001 certified manufacturing process for consistent quality Resistant to road grime, heat, and everyday exterior exposure Lightweight design — 0.5kg total — causes no load stress on bumper 100% brand new in factory condition — not refurbished or used Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Land Rover Discovery 5 L462 Facelift 2021–2024 Verify Before Order Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–30 Minutes  ·  🔩 Tools Required: None Thoroughly clean the rear bumper area around the exhaust outlets using an isopropyl alcohol wipe or panel cleaner. Remove all grease, dirt, and wax residue to ensure strong adhesion. Allow the surface to dry completely before proceeding. Do not apply in cold or wet conditions — ideal temperature is 15°C to 30°C. Dry-fit the tail pipe trim cover against the bumper to confirm alignment and positioning before committing to adhesive. Peel the backing from the pre-applied 3M adhesive tape on the rear of the trim cover. Carefully align the cover to the exhaust surround area and press firmly into position. Apply sustained pressure for 30–60 seconds across the full surface to ensure full adhesive contact. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing to moisture. ⚠ Important: Please confirm this product is compatible with your exact Discovery 5 variant and model year before placing your order. If your vehicle has been modified or features an aftermarket rear bumper, fitment cannot be guaranteed. Contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you're unsure. Complete Your Discovery 5 Build Browse the full Victorious Automotive range of Land Rover Discovery 5 accessories — from interior trim upgrades to exterior styling components trusted by enthusiasts worldwide. Shop Discovery 5 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for compatibility purposes. Always verify fitment against your specific vehicle specification before purchasing.

Premium · BMW G11/G12 · Exhaust Styling Glossy Black Steel Exhaust Muffler Trim for BMW 7 Series G11/G12 (2016–2023) Instantly elevate your BMW's rear styling with OEM-grade stainless steel muffler covers in high-gloss black. G11/G12 2016–2023 Stainless Steel High-Gloss Black No Drilling M-Look Styling Overview The BMW 7 Series G11/G12 (730, 740, 750Li) is a pinnacle of luxury and performance. These generational models demand finishes that match their presence on the road. Stock muffler trim rings, while functional, often lack the visual precision that separates a meticulous owner's car from the rest. Our Glossy Black Exhaust Muffler Trim Set transforms your exhaust system into a design statement. Crafted from premium stainless steel and finished in a mirror-bright high-gloss black, these covers deliver the visual impact of M-Sport variants at a fraction of the cost. The coverage is complete, the fit is precision-engineered, and the installation is simple—no drilling, no permanent modifications. Whether you're refreshing a 2016 entry-model 730 or maximizing the presence of a 750Li, this upgrade speaks to an owner who understands that small details define character. Paired with our discount code 22GET20, you can style a second BMW accessory at 20% off. What's Included 🔧 Pair of Muffler Covers Premium stainless steel, high-gloss black finish 💨 Professional-Grade Adhesive Heat-activated, tested for durability in all climates 📖 Installation Guide Step-by-step instructions with prep and maintenance tips ✓ 30-Day Money-Back Guarantee Full refund if not satisfied, no questions asked Product Highlights Premium stainless steel resists salt, moisture, and UV exposure High-gloss black finish matches modern BMW M-Sport aesthetics Precision-engineered to fit G11/G12 exhaust systems perfectly Zero drilling required—adhesive-only installation saves time and resale value Heat-activated adhesive bonds stronger when warmed before application Lightweight design adds zero weight penalty to your vehicle Easy to maintain—stainless steel cleans with standard car care products Reversible installation does not void manufacturer warranties Tested across European climates—from Alpine cold to Mediterranean heat Complements OEM and aftermarket exhaust system variants Compatibility Model Year Range Variant Status BMW 7 Series 2016–2023 730i / 730Li Direct Fit BMW 7 Series 2016–2023 740i / 740Li Direct Fit BMW 7 Series 2016–2023 750Li / 750Li xDrive Direct Fit BMW 7 Series 2016–2023 M760i xDrive Direct Fit BMW 8 Series (G14/G15) 2019+ All variants Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 minutes Prepare the surface: Clean the existing muffler trim with warm soapy water and dry completely. Light sanding (220-grit) improves adhesion. Heat the adhesive: Use a heat gun or hair dryer set to medium heat. Warm the adhesive backing for 30–45 seconds until pliable. Position carefully: Align the first cover with the muffler opening. Press firmly from center outward to remove air pockets. Allow cure time: Leave undisturbed for 24 hours before washing. Full strength develops over 48 hours. Repeat on second muffler: Follow the same process for the passenger-side cover to ensure symmetry. Note: Do not wash your vehicle or expose the trim to heavy rain for 48 hours after installation. Heat activation is critical to adhesion strength—skipping this step may result in premature peeling. Care & Maintenance Stainless steel requires minimal upkeep. Wash regularly with mild soap and water. For stubborn brake dust or tar, use a dedicated stainless steel cleaner (e.g., Autosol or similar). Avoid abrasive pads or steel wool, which can scratch the finish. A hydrophobic ceramic coating applied annually will enhance gloss and water beading. Ready to Finish Your 7 Series? Join over 12,300 owners who trust Victorious Automotive for premium BMW and luxury vehicle styling. Every purchase backed by our 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS, or TNT. Add to Cart Apply code 22GET20 at checkout to save 20% on any second item. 4.9/5 from 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping included ✓ UK support: +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with BMW AG, BMW of North America, Jaguar Land Rover, or any official manufacturer. All product names and trademarks referenced are the property of their respective owners. This product is designed for aftermarket enhancement only.

Victorious · Mercedes-Benz · Exhaust Covers AMG Quad Pipe Exhaust Cover for Mercedes-Benz GLC, A, B, C, E-Class (2016–2017) Premium stainless steel exhaust trim that elevates your Mercedes aesthetic with a sporty, high-performance finish. GLC W205 W213 W176 W246 2016–2017 304 Stainless Steel Quad Pipe Design Tape Install Overview Designed for Mercedes-Benz owners who demand visual authenticity without compromise, this AMG exhaust cover transforms the rear end of your C-Class W205 Coupe, GLC Class, B-Class W246, E-Class W213 Coupe, and A-Class W176 into a statement of refined sportiness. The quad-pipe aesthetic mimics high-spec AMG models, giving your vehicle an instantly elevated presence. Engineered from marine-grade 304 stainless steel, this cover delivers the durability and mirror finish expected in premium automotive accessories. Available in shiny silver or gloss black, it integrates seamlessly with your Mercedes' design language while resisting salt spray, UV exposure, and weathering. Installation is refreshingly straightforward—automotive-grade double-sided adhesive tape eliminates the need for tools, welding, or professional fitting. Most owners complete the job in under 15 minutes per side. What's Included 📦 Exhaust Covers (Pair) 2× stainless steel quad-pipe covers 🧴 Adhesive Tape (Pre-Applied) Automotive-grade double-sided tape 📋 Fitting Guide Step-by-step installation instructions ✓ Quality Assurance Pre-fit tested on your vehicle model Product Highlights 304 stainless steel construction for superior corrosion resistance Available in shiny silver and gloss black finishes Thicker gauge material for authentic proportional appeal Pre-applied automotive-grade adhesive tape No tools, welding, or drilling required Fits factory exhaust pipes precisely Mirrors OEM AMG quad-pipe styling Weather-resistant and salt-spray tested 30-day money-back guarantee on all purchases Comprehensive vehicle compatibility support Compatibility Model Code Years Fit C-Class Coupe W205 2015–2017 Direct Fit GLC Class C253 2016–2017 Direct Fit B-Class W246 2015–2016 Direct Fit E-Class Coupe W213 2014–2017 Direct Fit A-Class W176 2016–2017 Direct Fit Installation Notes Difficulty: Beginner | Time: 15 minutes per side Clean and dry the exhaust pipe surface thoroughly with a microfiber cloth and isopropyl alcohol. Remove the protective backing from the pre-applied adhesive tape on the exhaust cover. Carefully position the cover over the exhaust pipe, aligning it with the factory outlet. Press firmly and evenly across the entire surface for 20 seconds to ensure full adhesion. Allow 24 hours of cure time before exposure to heat or high speeds. Repeat steps 1–5 for the second cover. Important: Allow the exhaust system to cool completely before installation. Wet or contaminated exhaust pipes will compromise adhesive performance. Do not install on vehicles exceeding factory exhaust temperatures. Elevate Your Mercedes Styling Join thousands of discerning Mercedes owners who've transformed their rear fascia with premium quad-pipe exhaust covers. Authentic AMG looks, professional finishing, backed by Victorious Automotive's 30-day guarantee. View Current Stock Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL 📞 +44 203 943 9919 ↩️ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official OEM entity. Product compatibility is based on published factory specifications. Always verify fitment before purchase. Improper installation may void vehicle warranty; consult your dealership if unsure.

Victorious · Mercedes-Benz · Exhaust Trim Glossy Black Stainless Steel Exhaust Muffler Trim for Mercedes GLA X156 Elevate your GLA's rear end with premium gloss black stainless steel exhaust trim—no drilling, adhesive installation. GLA X156 2013–2019 Stainless Steel Glossy Black Exhaust Trim Adhesive Install Overview Your Mercedes-Benz GLA Class X156 deserves a rear end that matches its understated elegance. This Glossy Black Stainless Steel Exhaust Muffler Trim transforms the rear bumper area with a dynamic, high-end finish—the kind you'd find on premium models. Crafted from premium stainless steel and finished in deep gloss black, it catches light beautifully and demands attention. Installation couldn't be simpler. Using advanced adhesive technology, this trim pairs arrive ready to bond directly to your existing exhaust—no drilling, no permanent modifications. Heat the adhesive for optimal grip, apply, and you're done. The sleek design protects your original exhaust while adding visual depth and sophistication to your vehicle's profile. Perfect for owners who understand that details matter. This is a straightforward, reversible upgrade that delivers premium-level impact without the premium-level hassle. What's Included ⚙️ Muffler Trim Pair Left and right gloss black stainless trim 🧴 Premium Adhesive High-strength bonding solution included 📖 Installation Guide Step-by-step instructions with heat activation notes Product Highlights Premium stainless steel construction for durability Deep gloss black finish—no chrome, pure attitude Direct fit design for GLA X156 (2013–2019) Adhesive installation—zero drilling required Protects original exhaust from wear Heat-activated adhesive for optimal bonding Reversible—remove cleanly if needed Pair installation—both sides included Professional finish elevates rear appearance Lightweight, weather-resistant material Compatibility Mercedes Model Generation Years Fit GLA Class X156 (1st Gen) 2013–2019 Direct Fit GLA Class H247 (2nd Gen) 2020+ Not Compatible GLC Class C253 2015+ Not Compatible GLE Class W167 2020+ Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 minutes Clean the exhaust area. Use a microfiber cloth and mild soap to remove dirt, grease, and residue. Ensure the surface is completely dry. Heat the adhesive. Apply gentle heat (using a heat gun on low setting, 30–40°C) to the adhesive backing for 2–3 minutes until it becomes tacky. Position the trim. Carefully align the left trim first, centering it over your exhaust outlet. Press firmly for 10–15 seconds. Repeat for the right side. Install the right trim using the same method, ensuring both trims sit symmetrically. Allow to cure. Let the adhesive set for a full 24 hours before driving. Avoid washing your vehicle during this period. Check alignment. Once cured, ensure both trims sit flush and evenly spaced. Minor adjustments can be made by gently lifting and repositioning if needed (within the first 2 hours). Important: Do not expose the vehicle to extreme heat or heavy water pressure for 48 hours after installation. This allows the adhesive to fully cure and bond permanently. Ready to Finish Your GLA? Upgrade your Mercedes GLA X156 with the premium gloss black exhaust trim that delivers real presence. Easy install, permanent impact. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ 4.9/5 stars — 12,300+ verified reviews ✓ +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes brand entity. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket fitment only.

```html Victorious · Mercedes GLA · Exhausts Chrome Exhaust Muffler Cover for Mercedes-Benz GLA Class X156 (2014–2020) Premium stainless-steel muffler cover that elevates your GLA's rear styling with a sophisticated chrome finish. X156 2014–2020 Stainless Steel Chrome & Black No Drilling Overview The Mercedes-Benz GLA Class X156 is a sophisticated compact SUV that commands presence on every road. Our chrome exhaust muffler cover is engineered to enhance that visual impact by transforming the rear profile with premium-grade styling. Crafted from high-quality stainless steel, this muffler pipe cover delivers a luxury finish that complements the GLA's modern design language. Available in polished chrome or high-gloss black, the cover catches light and draws the eye exactly where it should—your vehicle's bold rear end. Installation is straightforward and non-invasive: our advanced adhesive tape system requires no drilling, cutting, or permanent modifications. The bond is durable, weather-resistant, and reversible if you ever wish to remove it. What's Included 📦 1 Pair of Muffler Covers Stainless steel, pre-finished 🔧 High-Grade Adhesive Tape Professional automotive spec 📋 Installation Guide Step-by-step instructions included Product Highlights Stainless steel construction resists rust and corrosion Available in chrome or high-gloss black finish No drilling, cutting, or vehicle modification required Professional-grade adhesive tape for secure, long-term hold Easy installation in under 15 minutes Weather-resistant and UV-stable coating Direct fit for X156 models (2014–2020) Transforms rear styling without compromising function Reversible installation—remove anytime without residue Heat activation improves adhesion and durability Compatibility Model Year Range Fit Mercedes-Benz GLA Class 2014–2020 (X156) Direct Fit Mercedes-Benz GLA Class 2021+ (X157 / H247) Not Compatible Other Mercedes models All years Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Prepare the surface: Clean both the muffler pipes and the rear of the cover with soap and water. Dry completely with a soft cloth. Position the cover: Align the muffler cover over the exhaust pipe outlet, ensuring a flush, centered fit. Apply adhesive: Peel back the tape backing and press the cover firmly onto the muffler. Apply even pressure across the entire surface for 30 seconds. Heat activation (recommended): Use a heat gun or hair dryer on medium setting, warming the adhesive for 1–2 minutes. This dramatically improves long-term bond strength. Cure time: Allow 24 hours before exposing the vehicle to moisture or high temperatures. Final check: Inspect all edges and ensure the cover is secure. No gaps should be visible. Important: Apply heat to the adhesive for optimal adhesion and durability. Ensure the muffler is completely cool before installation. Do not apply in temperatures below 10°C or above 35°C. Elevate Your GLA's Presence Premium chrome styling meets practical installation. Our exhaust muffler cover transforms your Mercedes-Benz GLA's rear end with zero compromise—no drilling, no hassle, just a sharper, more refined look. Shop Exhaust Covers Save 20% on any 2 items with code 22GET20 4.9/5 stars from 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler AG, or any official Mercedes distributor. All product names and trademarks remain the property of their respective owners. This product is an aftermarket accessory designed for fitment; fitment and performance may vary by vehicle condition and installation quality. ```

Audi · A6/A7 C7 · Exhaust Styling Stainless Steel Chrome Exhaust Pipe Cover – Audi A6 A7 C7 2016–2018 Premium dual-pipe exhaust trim that elevates your A6/A7 rear end with polished stainless steel styling and simple adhesive installation. Audi A6 C7 Audi A7 C7 2016–2018 Stainless Steel No Drilling Pair Included Overview The Audi A6 and A7 (C7) command attention on the road—and your exhaust detail should too. This dual stainless steel chrome pipe cover transforms the rear bumper zone into a sharp, purposeful focal point that mirrors the sportier S and RS trim packages. Precision-engineered from heavy-gauge stainless steel, these covers arrive as a matched pair and install in minutes using included premium-grade adhesive tape. No drilling, no modifications, no compromise. The high-gloss chrome finish resists oxidation and maintains its shine across seasons, while the alternative matte black option offers a darker, more understated aesthetic. Whether you're refining a stock A6 or adding visual depth to an already-tuned sedan, these pipe covers deliver immediate curb presence and long-term durability that matches the quality of your Audi engineering. What's Included 📦 Dual Pipe Covers Left and right stainless steel trim pieces 🔧 Premium Adhesive Tape High-strength 3M-grade bond strips included 📖 Fitment Guide Clear positioning and prep instructions ✨ Two Finish Options Chrome or high-gloss black finishes Product Highlights Heavy-gauge stainless steel construction resists rust and oxidation Dual-pipe styling mimics sportier S / RS trim appearance Available in polished chrome or matte black finish Sold as a pair – left and right covers included Precision fit for A6 and A7 C7 2016–2018 model years Adhesive installation – no drilling or permanent modification Premium-grade 3M tape ensures years of secure fitment Weather-resistant and UV-stable finish Enhances rear bumper visual presence and sporty appeal Easy removal if desired – leaves no residue or damage Compatibility Model Years Body Type Fit Status Audi A6 C7 2016–2018 Sedan Direct Fit Audi A7 C7 2016–2018 Fastback Direct Fit Audi A6 C8 2019+ Sedan Not Compatible Audi A7 C8 2019+ Fastback Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Prepare the surface: Clean the rear bumper exhaust area thoroughly with soap and water. Dry completely and lightly wipe with a clean microfibre cloth. Remove any dirt, tar, or residue with automotive degreaser if needed. Heat the adhesive: Briefly warm the included adhesive tape strips with a heat gun or lighter (hold 3–4 inches away). Do not overheat—warm to touch is sufficient. This activates the 3M bond. Position the covers: Align the left and right covers symmetrically around your existing exhaust pipe openings. Mark the position lightly with a chinagraph pencil for reference. Apply adhesive: Peel the backing from the tape and press firmly onto the bumper for 30 seconds per side, maintaining even pressure across the full contact area. Allow cure time: Wait 24 hours before exposing the vehicle to water or driving. The bond continues to strengthen over 48–72 hours. Important: Surface temperature matters. Install in ambient conditions above 10°C for optimal adhesive performance. If removal is ever needed, warm the cover gently and peel slowly to avoid bumper paint damage. Elevate Your A6 / A7 Today Premium stainless steel exhaust trim that speaks the language of your Audi's engineering. Installed in minutes. Built to last. Order now and step into the sporting aesthetic your sedan deserves. Add to Cart Save 20% when you bundle with another item Code: 22GET20 4.9/5 – 12,300+ reviews 🌍 Worldwide shipping via DHL / FedEx ✓ 30-day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Audi AG, Volkswagen Group, or Audi Sport. All vehicle names and logos are registered trademarks of their respective manufacturers and are used solely for identification and compatibility purposes. This product is designed to fit the specified Audi models and is not an OEM part.

Victorious · BMW · Exhaust System Stainless Steel Tail Muffler Exhaust Pipe – BMW 7 Series F01 Premium 304 stainless steel exhaust finisher that enhances your BMW's presence with a sleek, refined aesthetic. F01 (2009–2014) 304 Stainless Steel Tail Pipe Finisher Silver or Black ISO9001 Certified Overview The BMW 7 Series F01 (2009–2014) represents the pinnacle of German executive luxury. This chassis demands components that match its refinement—and this stainless steel tail muffler exhaust pipe delivers exactly that. Machined from high-quality 304 stainless steel, this finisher replaces or complements your existing exhaust outlet, adding visual depth and presence to the rear of your 7 Series. Available in brushed silver or refined black, it harmonises seamlessly with any paint finish whilst providing years of corrosion resistance. Installation is straightforward using automotive-grade adhesive tape—no drilling, no modification to existing components. It's the perfect finishing touch for those seeking understated performance aesthetics without structural change. What's Included 📦 1x Stainless Steel Tail Finisher 304 stainless, pre-finished 🔧 Automotive Adhesive Tape Double-sided, industrial strength 📋 Installation Guide Clear step-by-step instructions Product Highlights 304 stainless steel construction—corrosion and weather resistant Two finish options: polished silver or satin black Compact, lightweight design (300g only) Dimensions: 30cm L × 15cm W × 10cm H Non-invasive adhesive installation—no permanent modification ISO9001 certified manufacturing process Perfect for concours condition or subtle performance upgrades Compatible with all 7 Series F01 model years (2009–2014) Factory-quality finish and edge work Instantly elevates rear-end visual presence Compatibility Model Years Status BMW 7 Series Sedan (F01) 2009–2014 Direct Fit BMW 7 Series Long Wheelbase (F02) 2009–2014 Direct Fit BMW 760i / 760Li (F01/F02) 2009–2014 Direct Fit BMW 750i / 750Li (F01/F02) 2009–2014 Direct Fit BMW 740i / 740Li (F01/F02) 2009–2014 Direct Fit Other BMW models Any Not Compatible Note: Always verify fitment with your specific chassis code before purchase. Request images of your current exhaust outlet if uncertain. Installation Notes Difficulty: Beginner | Time: 10–15 minutes Clean the existing exhaust outlet rim thoroughly with a microfibre cloth and mild degreaser. Allow to dry completely. Peel back the adhesive tape backing on the tail finisher. Do not touch the tape with bare fingers. Align the finisher carefully with your exhaust outlet opening. This is the critical step—take your time. Press firmly and evenly across the entire surface for 30 seconds, starting from the centre outward. Allow adhesive to cure for 24 hours before washing or driving in wet conditions. For removal: gently heat the adhesive with a heat gun (low setting) and peel away slowly. Use adhesive remover for residue. Important: This finisher is cosmetic. It does not alter exhaust function, emissions, or performance. Ensure your vehicle's exhaust system is in good working order before installation. If your outlet is damaged, cracked, or corroded, repair or replace it first. Ready to Refine Your 7 Series? Small touches create lasting impressions. This stainless steel tail finisher adds visual sophistication to your F01 without compromise. Trusted by BMW enthusiasts and detailers worldwide. Shop Now Use code 22GET20 for 20% off when you buy 2 items. ✓ 30-Day Money Back ✓ 4.9/5 Stars 12,300+ Reviews ✓ Worldwide Shipping DHL, FedEx, UPS ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to BMW, BMW AG, or Bayerische Motoren Werke. All product names and trademarks remain the property of their respective owners. This product is designed for aesthetic enhancement only and does not alter vehicle emissions, performance, or warranty status. Always consult your vehicle's handbook and a qualified technician if you have concerns about fitment or installation.

BMW · G11/G12 · Exterior Trim BMW 7 Series G11/G12 304 Stainless Steel Tail Exhaust Pipe Premium polished stainless steel tail trim for the iconic BMW 7 Series sedan—corrosion-resistant, easy-install luxury detailing. BMW G11/G12 2019–2020 304 Stainless Steel Exhaust Trim Silver & Black Adhesive Install Overview The BMW 7 Series G11/G12 is the definitive expression of luxury sedan engineering—refined, commanding, and built to impress. Your attention to detail extends to every visible surface, and the rear exhaust trim is no exception. These OEM-style stainless steel tail pipes elevate the rear aesthetic with a polished, purposeful finish that matches the precision engineering BMW owners expect. Crafted from premium 304 stainless steel, these exhaust trim pieces deliver durability without compromise. The material resists salt spray, UV exposure, and daily road contaminants, ensuring your finish stays brilliant for years. Available in sophisticated Silver and contemporary Black, they complement factory styling while adding understated visual presence. Installation is straightforward using the included automotive-grade adhesive tape—no drilling, no permanent modification. A natural upgrade for owners who refuse to overlook the details. What's Included 🏷️ Tail Exhaust Pipe Single stainless steel piece, 40cm 🔧 Adhesive Tape Automotive-grade bonding tape Product Highlights 304 stainless steel resists salt, humidity, and UV damage Two finishes: polished Silver or sleek Black 40cm length designed for OEM fitment Lightweight at 500g—no load impact Easy adhesive installation—no tools required Complements factory rear styling seamlessly ISO9001 certified manufacturing Non-destructive adhesive application Precise fitment for 2019–2020 models Restores or upgrades tired trim instantly Compatibility Model Generation Years Fit Status BMW 7 Series G11/G12 2019–2020 Direct Fit BMW 7 Series G11/G12 2021+ Not Compatible BMW 7 Series F01/F02 2009–2015 Not Compatible Other BMW Models Any Any Not Compatible Installation Notes Difficulty: Easy | Time: 10–15 minutes Clean the rear bumper surface thoroughly with mild soap and water; dry completely. Remove the protective backing from the adhesive tape on the stainless steel trim piece. Align the exhaust pipe trim with the factory exhaust outlet, ensuring even spacing on both sides. Press firmly into place, starting from the center and working outward to eliminate air gaps. Allow adhesive to cure for 24 hours before exposure to water or extreme heat. Important: Ensure your vehicle VIN matches the 2019–2020 G11/G12 generation before purchase. Pre-clean the installation surface for maximum adhesion. Do not install in temperatures below 10°C. Elevate Your 7 Series Rear Styling These precision stainless steel tail pipes deliver the refined detail your BMW 7 Series deserves. Built to last, designed to impress—add them to your cart today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9★ from 12,300+ reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL / FedEx shipping ✓ +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessory specialist and is not affiliated with BMW, the BMW Group, or Bayerische Motoren Werke AG. All product names, logos, and trademarks are the property of their respective manufacturers. Product fitment and compatibility are provided in good faith; buyers are responsible for verifying fit with their specific vehicle.

BMW · 5 Series G30 · Exhaust Trim BMW 5 Series G30 Chrome Exhaust Tailpipe Trim (2016–2023) Premium stainless steel muffler covers that deliver a quad-pipe aesthetic with factory-quality finishes and effortless installation. G30 2016–2023 Stainless Steel Chrome Finish Exhaust Styling Overview The BMW 5 Series G30 is a refined executive saloon that rewards tasteful enhancement. This chrome exhaust trim kit elevates the rear end with a purposeful quad-pipe look, transforming the factory tailpipe openings into a visually commanding detail that catches light and draws the eye. Engineered from premium stainless steel with either a shiny silver or high-gloss black finish, these covers are designed to withstand harsh weather, road salt, and continuous exposure without fading or corroding. The ISO9001-certified construction ensures durability and peace of mind across years of use. Installation is straightforward—included automotive-grade adhesive tape handles all the work. Heat the tape slightly before application for optimal adhesion, position the covers over your existing tailpipes, and you're done. No tools. No drilling. No permanent modification. Your 5 Series transforms in under 10 minutes. What's Included 🔧 2x Chrome Tailpipe Covers Stainless steel quad-pipe trim 🖇️ Automotive Adhesive Tape Premium application system 📋 Installation Guide Step-by-step instructions ✔️ 30-Day Money-Back Guarantee Full refund, no questions Product Highlights Dual finishes: shiny silver or high-gloss black to match your aesthetic Quad-pipe design transforms the rear-end appearance with visual impact Premium stainless steel construction resists rust, salt, and weathering ISO9001 certified manufacturing for consistent quality and durability Includes automotive-grade adhesive tape for secure, permanent fit Zero drilling or permanent modification to your vehicle Compact dimensions: 22cm length × 15cm width, 316g per cover Heat-activation adhesive for optimal surface bonding Protects existing exhaust openings from dirt and debris Reversible installation—remove without residue if needed Compatibility BMW 5 Series Model Year Range Fit 5 Series G30 2016–2023 Direct Fit 5 Series G31 Touring 2017–2024 Verify First M550i / M550d 2016–2023 Direct Fit Earlier 5 Series (F10/F11) 2010–2016 Not Compatible Installation Difficulty: Easy | Time: 10 minutes Clean the rear bumper and tailpipe openings with a dry cloth, removing dust and debris. Gently warm the adhesive tape using a hair dryer or heat gun for 15–20 seconds to activate the adhesive. Align the first chrome cover over the driver-side exhaust opening and press firmly for 10 seconds. Repeat for the passenger-side cover, ensuring both are level and symmetrical. Allow adhesive to cure for 24 hours before driving or washing the vehicle. For removal: gently peel from one corner and use adhesive remover if needed—no damage to paint. Note: Ensure the rear bumper surface is clean and dry before application. Heat the adhesive tape slightly—this activates the bonding agent and ensures a permanent, lasting fit. Why Choose Victorious We specialise in premium automotive styling. Every product is tested for durability, fit, and finish before it reaches you. Our 30-day money-back guarantee and 4.9-star customer rating (12,300+ verified reviews) reflect our commitment to quality and your satisfaction. Transform Your 5 Series Today Elevate your BMW with this factory-quality exhaust trim. Premium stainless steel, effortless installation, and a quad-pipe aesthetic that speaks for itself. Shop Chrome Exhaust Trim Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money-Back ✓ Worldwide Shipping ✓ 4.9/5 Verified Reviews ✓ Expert Support Mon–Fri Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm GMT) Victorious Automotive is not affiliated with, endorsed by, or an official partner of BMW AG, Bayerische Motoren Werke, or any subsidiary. BMW is a registered trademark of BMW AG. This product is an aftermarket accessory designed for compatibility with the 5 Series G30 and does not modify, alter, or affect the vehicle's emissions, safety systems, or factory warranty. Installation is the responsibility of the buyer. Always consult your vehicle's manual and local laws before installation. Victorious Automotive accepts no liability for improper installation or use.

Victorious · Mercedes S-Class · Exterior Trim Glossy Black Steel Chrome Exhaust Muffler Pipe Cover Trim for Mercedes Benz S-Class Transform your S-Class rear profile with premium stainless steel exhaust trim that delivers dynamic styling and lasting durability. Mercedes S-Class 2010–2017 Stainless Steel Glossy Black Finish Quad Exhaust Look Overview Built for the discerning Mercedes S-Class owner, this Glossy Black Steel Chrome Exhaust Muffler Pipe Cover Trim elevates your sedan's rear-end aesthetics with a contemporary quad-exhaust appearance. Compatible with S-Class models from 2010–2017, this precision-engineered accent piece adds visual depth and presence to your vehicle's exhaust area—transforming an understated detail into a signature styling element. Engineered from premium stainless steel, this trim resists corrosion, heat stress, and weathering. The striking glossy black finish contrasts beautifully against chrome accents, creating a modern, aggressive look that speaks to your attention to detail. Installation is straightforward using automotive-grade adhesive tape, ensuring a secure, permanent bond without drilling or fasteners. Whether you're upgrading a well-maintained W221 platform or refreshing your S-Class's exterior presence, this exhaust trim delivers professional-grade results that rival dealership alternatives—at a fraction of the cost. What's Included 📦 Exhaust Pipe Cover Trim Glossy black stainless steel, pre-formed for perfect fit 🔧 Automotive Adhesive Tape High-strength, weather-resistant bonding strips Product Highlights Premium stainless steel construction resists corrosion and heat damage Glossy black finish creates striking contrast with chrome elements Quad-exhaust visual effect enhances rear profile instantly Precise fitment engineered for 2010–2017 S-Class models Lightweight design (300g) eliminates handling impact Includes professional-grade automotive adhesive tape ISO 9001 tested for quality assurance and durability No drilling, fasteners, or modifications required Quick installation—completes in under 30 minutes Maintains factory aesthetics while elevating visual presence Compatibility & Fitment S-Class Generation Year Range Fitment Status W221 (Long Wheelbase) 2010–2017 Direct Fit W221 (Standard Wheelbase) 2010–2017 Direct Fit Earlier S-Class (W220) Before 2010 Not Compatible Newer S-Class (W222) 2018+ Not Compatible Always verify your specific model year and configuration before ordering. Contact our sales team at +44 203 943 9919 (Mon–Fri, 9am–7pm) if you're unsure about fitment. Installation Notes Installation Difficulty: Beginner | Time: 20–30 minutes Park your S-Class on a level surface and allow the exhaust system to cool completely (minimum 2 hours after driving). Clean the exhaust pipe area thoroughly with a microfiber cloth and mild degreaser. Dry completely. Gently remove the protective backing from the automotive adhesive tape strips. Align the trim piece carefully with your exhaust pipe opening, ensuring symmetrical positioning. Press firmly and evenly across the entire surface for 15–20 seconds to activate the adhesive bond. Allow 24 hours for full cure before washing or exposing the vehicle to heavy rain. Important: Pre-heat the adhesive tape with a heat gun (low setting, 30–60 seconds) before application to ensure maximum grip, especially in cold climates. Do not apply during rain or high humidity. Ready to Upgrade Your S-Class? Elevate your Mercedes S-Class with premium exhaust trim that transforms the rear profile. Add this to your cart today and discover why thousands of luxury car owners trust Victorious Automotive for expert-grade styling upgrades. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ 4.9/5 Stars (12,300+ Reviews) ✓ Expert Support +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes brand entity. All vehicle references are used solely for fitment and compatibility purposes. Product names and specifications are provided by the manufacturer. Always verify compatibility with your specific vehicle before purchase.

BMW · X3/X4 G01 · Exhaust Trim Glossy Black Exhaust Muffler Pipe Tail Trim for BMW X3/X4 G01 (2018–2019) Transform your BMW's rear end with premium stainless steel styling that captures the aggressive luxury aesthetic of high-spec models. G01 2018–2019 Stainless Steel Glossy Black Finish Quad Design Direct Fit Overview Your BMW X3 or X4 G01 deserves rear styling that matches its modern architecture. This Glossy Black Exhaust Muffler Pipe Tail Trim elevates the visual presence of your vehicle with a sleek, premium appearance reminiscent of factory M-Sport and high-end trim levels. Whether you're running a standard model or already upgraded elsewhere, this finishing touch commands attention at every angle. Engineered from premium stainless steel with a high-gloss black finish, this trim features a dynamic quad-look design that adds visual depth and sportiness to your rear bumper. The construction is built to resist corrosion, UV fading, and the elements—meaning this investment maintains its finish year after year without compromise. Installation is straightforward using automotive-grade adhesive tape, securing directly to your existing exhaust tips. No drilling, no permanent modification, no dealer markup. Backed by ISO9001 certification, this is engineered styling for the discerning enthusiast. What's Included ✦ Exhaust Tail Trim Glossy black stainless steel quad design 🔌 Adhesive Tape Kit Pre-cut automotive-grade mounting tape Product Highlights Premium stainless steel construction resists corrosion and maintains finish High-gloss black finish with exceptional UV and weather resistance Quad-look design adds sportiness and modern aggression to rear profile ISO9001 certified manufacturing for uncompromising quality Adhesive tape installation—no drilling or permanent modifications required Lightweight design (300g) causes zero handling or performance impact Direct fit for BMW X3/X4 G01 without adapter or modification Factory-matched dimensions (23cm × 14cm × 6cm) for seamless integration Creates premium appearance without dealership cost Reversible installation with no residue if removal becomes necessary Compatibility Model Year Fitment BMW X3 G01 2018–2019 Direct Fit BMW X4 G01 2018–2019 Direct Fit BMW X3 (Pre–G01) 2011–2017 Not Compatible BMW X4 (Pre–G01) 2014–2017 Not Compatible Installation Notes Difficulty: Beginner | Time: 10–15 Minutes Clean the rear bumper and exhaust tip surfaces with rubbing alcohol. Allow 5 minutes to dry completely. Gently heat the adhesive tape backing with a lighter for 3–5 seconds to activate bonding strength. Carefully position the trim onto the exhaust tip, ensuring alignment with your vehicle's existing lines. Press firmly across the entire surface for 10–15 seconds, paying extra attention to the edges. Allow 24 hours for full adhesive cure before highway driving or car washes. Pro Tip: For optimal adhesion in cold weather, warm your exhaust tips by running the engine for 2 minutes before installation. This ensures the surface temperature activates the tape's full grip potential. Ready to Upgrade Your Rear End? Glossy Black Exhaust Tail Trim for BMW X3/X4 G01 gives you M-Sport presence without the M-Sport price tag. Premium stainless steel. Flawless finish. Direct fit installation. Order today and transform your BMW's visual impact. Shop Now Use code 22GET20 to save 20% when purchasing any 2 items. ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 Support: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW brand entities. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed as a non-structural cosmetic enhancement and does not alter vehicle function or performance.

Premium Automotive · BMW X3/X4 · Exterior Trim BMW X3/X4 G01 (2018–2019) Stainless Steel Exhaust Muffler Trim Premium chromium styling that elevates your X3 or X4's rear-end presence with refined German engineering. G01 2018–2019 Stainless Steel Chromium Styling Direct Fit Overview The BMW X3 and X4 G01 generation (2018–2019) represents a significant step forward in luxury compact SUV design. These models demand accessories that match their precision engineering and premium aesthetic. This exhaust muffler trim kit has been engineered specifically to complement the factory rear styling while adding a layer of refined visual depth. Manufactured from premium stainless steel with a polished chromium finish, this trim piece transforms the exhaust outlet area into a statement of understated elegance. The silvery finish contrasts beautifully against the rear bumper, creating visual interest without appearing aftermarket or heavy-handed. For owners seeking OEM-quality enhancements, this is a thoughtfully executed choice. The installation process is straightforward, using high-grade automotive adhesive tape engineered for long-term durability in all weather conditions. Whether you're preparing your X3 or X4 for resale, daily driving, or simply refining the details that matter, this trim delivers the kind of incremental quality refinement that distinguishes truly cared-for vehicles from the rest. What's Included ✦ Exhaust Muffler Trim Pieces 2x stainless steel trim pieces ✓ Adhesive Tape Professional-grade automotive bonding 📋 Installation Guide Step-by-step instructions included 🛡 30-Day Guarantee Full money-back if not satisfied Product Highlights Premium stainless steel construction resists oxidation and corrosion for years Polished chromium finish adds sophisticated visual depth to rear styling Engineered for 2018–2019 BMW X3 G01 and X4 G01 models Factory-matched fitment with zero modifications required ISO9001 certified manufacturing quality standards Quick installation using professional automotive adhesive tape Lightweight at 300g — no stress on factory mounts or fasteners Weather-resistant finish maintains appearance in all climate conditions Non-destructive installation preserves factory paint and finish Complements both M Sport and standard X3/X4 rear bumper designs Compatibility Model Year Status BMW X3 G01 2018–2019 Direct Fit BMW X4 G01 2018–2019 Direct Fit BMW X3 G01 2020+ Not Compatible BMW X4 G01 2020+ Not Compatible BMW X3 G02 2021+ Not Compatible Important: Verify your vehicle's model year and generation code (G01) before purchasing. Fitment is specific to 2018–2019 production runs only. Installation Notes Difficulty Level: Easy | Time Required: 15–20 minutes Clean the exhaust outlet area thoroughly with warm soapy water and allow to dry completely (minimum 30 minutes) Remove the protective backing from the adhesive tape strips Carefully position the first muffler trim piece on the driver-side exhaust outlet, ensuring alignment with the bumper edge Apply firm, even pressure across the entire surface for 10 seconds to activate the adhesive bond Repeat steps 3–4 for the passenger-side exhaust outlet trim piece Allow adhesive to cure for 24 hours before washing or driving in wet conditions Note: Professional installation is recommended for optimal positioning and durability. Poor surface preparation is the leading cause of adhesive failure — invest the extra time in cleaning. Elevate Your X3 or X4 Today Small details define the character of a truly refined vehicle. This stainless steel exhaust trim represents the kind of thoughtful enhancement that owners who care about their BMW appreciate. It's not a dramatic mod — it's a whisper of intentionality. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ 4.9/5 Stars from 12,300+ reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to BMW AG, BMW of North America, Jaguar Land Rover, or any official BMW subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product descriptions and compatibility information are provided in good faith; always verify fitment with your vehicle's documentation or contact our support team before purchase.

Premium Automotive Accessories Mercedes-Benz S-Class W222 Exhaust Muffler Cover Trim – Stainless Steel Premium mirror-polished stainless steel exhaust trim that elevates your S-Class aesthetic while providing lasting protection. S-Class W222 2014–2020 Stainless Steel Mirror Polish Exhaust Protection Easy Install Overview The Mercedes-Benz S-Class W222 represents the pinnacle of luxury engineering. To match that calibre, every detail matters—including the often-overlooked exhaust finish. This premium muffler cover trim elevates your S-Class' rear-end presence with mirror-polished stainless steel that catches light and admiring glances in equal measure. Each set comprises two individually crafted pieces engineered for seamless fitment on S-Class W222 models (2014–2020). The mirror-polished finish isn't merely decorative; it's a statement of refinement. The 23cm × 9cm dimension ensures complete coverage of the factory muffler exit, transforming a utilitarian component into a visible luxury accent. Installation is straightforward—automotive-grade double-sided tape means no drilling, welding, or permanent modification. In under 10 minutes, you've enhanced both appearance and protection against weathering, salt spray, and corrosion. For S-Class owners who view their car as an extension of their standards, this is a non-negotiable detail. What's Included ✦ 2x Muffler Cover Trim Mirror-polished stainless steel ✦ Automotive-Grade Tape Pre-applied, repositionable ✦ Installation Guide Step-by-step with safety notes ✦ Cleaning Cloth Microfibre, for surface prep Product Highlights Premium stainless steel construction—no rust, no corrosion Mirror-polished finish reflects light for maximum visual impact 23cm L × 9cm W × 300g weight for perfect proportions Seamless fitment on S-Class W222 (2014–2020) models Protective coating against salt spray and weathering Adhesive-backed—zero modification to your vehicle Set of 2 covers both exhaust exits symmetrically Quick 10-minute installation, professional results Enhanced rear-end presence and luxury appeal Maintains factory aesthetics while elevating refinement Compatibility Mercedes-Benz Model Year Range Fit S-Class W222 2014–2020 Direct Fit S-Class W222 2021+ Not Compatible R-Class W251 2010–2017 Direct Fit GL-Class X166 2013–2015 Direct Fit Other Mercedes Models All Years Not Compatible Verify your model year and chassis code before ordering. This product is precision-engineered for listed variants only. Installation Difficulty Level: Easy | Time Required: 10 minutes Clean the surface: Use the provided microfibre cloth to remove dust, debris, and residue from both exhaust muffler exits. Ensure surfaces are dry. Position the trim: Align the first muffler cover over the left exhaust exit, checking symmetry and alignment with the bumper line. Apply with pressure: Remove the adhesive backing and press firmly for 15–20 seconds. Hold steady to ensure full contact. Repeat for second piece: Apply the second cover to the right exhaust exit using identical technique. Allow to cure: Do not disturb or expose to water for 24 hours. This allows the adhesive to achieve full strength. Final inspection: Verify both covers are level, flush, and symmetrical. Adjust if necessary within the first 4 hours. Important: Apply only to cool mufflers. Do not install immediately after driving. Ensure exhaust is at ambient temperature (minimum 20 minutes after engine shutdown) to maximise adhesive bond strength. Ready to Perfect Your S-Class? This mirror-polished exhaust trim is the finishing touch your Mercedes-Benz S-Class deserves. Elevate your rear-end styling, protect against corrosion, and make a statement of refined taste. Stock is limited—order today. Shop Exhaust Trim Order any 2 accessories and unlock 22GET20 for 20% off your entire order 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or Daimler-Benz. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket customization only.

Victorious Automotive · Range Rover Sport · Exhaust System Stainless Steel Exhaust Muffler for Range Rover Sport A precision-engineered stainless steel muffler that refines exhaust tone, reduces back pressure, and delivers a lasting, corrosion-resistant finish worthy of the Range Rover Sport's performance pedigree. Range Rover Sport L494 · L320 · L461 Stainless Steel Exhaust Muffler Corrosion Resistant Direct Fit Worldwide Shipping CAR-partment Overview The Range Rover Sport occupies a very particular space — a vehicle that genuinely performs, whether carving mountain roads or commanding an urban setting. It's a machine where the details matter, and that extends beneath the bodywork. The exhaust system is one component many Sport owners overlook until it begins to show its age: corrosion, reduced flow efficiency, and a dulled acoustic note that no longer reflects the engine's character. This stainless steel exhaust muffler is built to address all three. Manufactured from high-grade stainless steel, it resists the accelerated oxidation that plagues mild steel OEM mufflers — particularly in regions with road salting, high humidity, or extreme temperature cycling. The material's thermal resilience means it holds its structural integrity and surface finish across the full operating range of the Sport's engine, whether petrol or diesel. Beyond durability, the muffler's internal architecture is designed to smooth exhaust flow, reducing turbulence and back pressure in a way that improves exhaust gas evacuation. The result is a cleaner, slightly more pronounced exhaust note — refined rather than aggressive — and a fitment that restores or exceeds OEM performance standards without modification to the rest of the exhaust system. What's Included 🔩 Stainless Steel Muffler Main unit, fully assembled and ready to fit 🔗 Mounting Hardware Fasteners and clamps where applicable 📄 Fitting Reference Guide Basic installation reference sheet 📦 Protective Packaging Securely packed to prevent transit damage Product Highlights High-grade stainless steel construction throughout Superior corrosion and oxidation resistance Engineered to reduce exhaust back pressure Refined, deeper exhaust note without excess noise Direct OEM replacement geometry for clean fitment Maintains factory exhaust system compatibility Thermal stability across all operating temperatures Polished outlet finish enhances underbody appearance Long-service lifespan — outlasts standard mild steel units No modifications required to surrounding exhaust components Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Vogue L405 / L460 2013–2026 Verify Before Order Range Rover Velar L560 2017–2024 Not Compatible Land Rover Discovery L462 (D5) 2017–2024 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible If you're unsure whether this muffler is correct for your specific build, engine variant, or model year, please contact us before ordering: +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–120 minutes  ·  Recommended: Qualified Technician or Experienced DIY Allow the vehicle to cool fully — exhaust components retain heat for an extended period after use. Work only on a cold system. Raise the vehicle safely using a hydraulic lift or axle stands rated for the Range Rover Sport's weight. Never work beneath a vehicle supported only by a jack. Inspect the existing exhaust hangers and clamps before removal. Corroded fasteners should be treated with penetrating fluid and allowed to soak for 15–20 minutes before attempting removal. Disconnect the existing muffler from the mid-pipe and rear section. Support the muffler with a jack or assistant to prevent stress on remaining components. Transfer any reusable gaskets or hangers if applicable. Install the new stainless steel muffler, aligning with the mid-pipe and rear section connections. Secure all clamps and fasteners to the manufacturer's specified torque. Check hanger alignment to ensure the muffler sits centrally within the vehicle undercarriage. Start the vehicle and run to operating temperature. Inspect all connection points for exhaust leaks. A brief initial burn-off of surface oils from the new unit is normal. Important: Always confirm pipe diameter, inlet configuration, and engine variant compatibility before fitting. Incorrect fitment can result in exhaust leaks, noise, or damage to surrounding components. If in doubt, consult a qualified exhaust technician. Built for the Range Rover Sport. Finished to Last. Explore the full range of exhaust upgrades and performance accessories for your Range Rover Sport at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Shop Range Rover Sport Accessories Shop New Range Rover Sport L461 Use code 22GET20 at checkout for 20% off any two items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All model names, vehicle codes, and trademarks are the property of their respective owners and are referenced solely for fitment and compatibility purposes. Always verify compatibility with your specific vehicle before purchase. For advice, contact our team on +44 203 943 9919.