Products

```html Jaguar · E-Pace · Interior Protection Interior Door Sill Protect Plate Panel Cover Trim for Jaguar E-Pace 2018–2020 Premium stainless steel door sill protection plates that guard against scuffs while elevating your E-Pace's interior aesthetic. E-Pace 2018–2020 Stainless Steel Set of 4 Easy Install Overview The Jaguar E-Pace is a striking compact luxury SUV that demands attention to detail both inside and out. Your door sills are among the first contact points for passengers and one of the most vulnerable areas to scuffing from everyday wear—muddy boots, luggage, and daily entry take their toll on unprotected trim. These Interior Door Sill Protect Plate Panel Cover Trim sets deliver high-quality stainless steel protection engineered to shield against marks, scratches, and dirt transfer. Each precision-cut piece integrates seamlessly with the E-Pace's door frame, maintaining the factory aesthetic while introducing a subtle, professional chrome accent that catches light and elevates your cabin's premium feel. Installation is straightforward—no tools required, no drilling—and the adhesive backing ensures a permanent, rattle-free bond. Choose from three distinct styles to suit your personal taste, whether you prefer understated elegance or bold visual presence. What's Included 🛡️ 4 × Door Sill Plates Front and rear passenger-side coverage ✨ Premium Stainless Steel Precision-cut, corrosion-resistant finish 🎨 3 Style Options Select your preferred chrome profile and finish 📦 Ready to Install Pre-cut, pre-finished, adhesive-backed Product Highlights High-quality precision-cut stainless steel construction Corrosion-resistant finish maintains appearance year-round Factory-fit design matches E-Pace door sill geometry perfectly Three distinct style options to suit personal preference No-drill, adhesive installation—under 10 minutes total Protects against scuffs, marks, dirt transfer, and wear Chrome moulding adds premium, bespoke cabin ambiance Complete 4-piece set covers all door entry points Easy to clean and maintain; resists fingerprints Lifetime durability with proper care Compatibility Vehicle Model Code Year Range Fit Jaguar E-Pace C741 2018–2020 Direct Fit Jaguar E-Pace C741 2021+ Not Compatible Jaguar F-Pace All Years — Not Compatible Jaguar I-Pace All Years — Not Compatible Note: This product is designed exclusively for 2018–2020 Jaguar E-Pace models. Fitment varies by model year and generation. Confirm your vehicle year before purchase. Installation Installation Difficulty: Beginner | Time: ~10 minutes Clean the door sills: Use a microfibre cloth and mild soap solution to remove all dirt, dust, and residue from the E-Pace door sill trim. Allow to dry completely (2–3 minutes). Prepare the surface: Lightly buff the sill with a clean, dry cloth to ensure the adhesive backing makes full contact. Do not use abrasive materials. Peel and position: Carefully remove the adhesive backing from the first plate. Align it precisely with the door sill edge, starting at the front corner. Press and hold: Apply firm, even pressure across the entire length of the plate for 10–15 seconds to activate the adhesive bond. Repeat for all four plates: Follow steps 2–4 for the remaining door sills (passenger front, passenger rear, driver front, driver rear). Cure time: Allow 24 hours before exposing the sills to water or heavy use to ensure full adhesive set. ⚠️ Important: Do not install on damp, dusty, or textured surfaces. Ensure E-Pace is parked indoors during installation. If you live in a cold climate, allow the vehicle to warm to room temperature before applying the plates. Poor surface preparation is the leading cause of premature lift-off. Ready to Protect Your E-Pace? Preserve your Jaguar's interior trim and add a touch of luxury chrome detail in minutes. These precision-engineered door sill plates are engineered to outlast, outshine, and outperform—backed by our 30-day money-back guarantee. Shop Door Sill Plates Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 stars • 12,300+ reviews 🚚 Worldwide shipping • DHL, FedEx, UPS ✓ 30-day guarantee • No questions 📞 +44 203 943 9919 • Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with Jaguar Land Rover, JLR, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for use as an aftermarket enhancement only and does not constitute an endorsement by Jaguar Land Rover. Vehicle compatibility information is provided for reference only; please verify fitment with your vehicle documentation or contact our support team before purchase. ```

Ford · F-150 · Interior Lighting Interior LED Upgrade Kit — Ford F-150 (1992–2020) Canbus Error-Free A complete plug-and-play interior LED conversion for the Ford F-150 — brighter cabin lighting with zero error codes, across every generation from 1992 to 2020. Ford F-150 1992–2020 Canbus Error-Free Plug & Play Dome · Map · Trunk Up to 17 Pieces 50,000hr Lifespan Direct OEM Fit Overview The Ford F-150 has been America's best-selling truck for decades, and across its many generations the factory interior lighting has remained underwhelming — dim, warm-toned bulbs that struggle to illuminate the cabin at night. Whether you're loading gear in the dark or simply want a cleaner, more modern feel inside your cab, the difference a quality LED upgrade makes is immediately apparent. This Zoomsee interior LED kit has been developed specifically for the F-150 across every generation from 1992 to 2020, with each year-range package containing the precise number and type of bulbs for your vehicle. Every bulb is fully Canbus-compatible, meaning your truck's ECU will not register any errors or warning lights after installation — a common issue with cheaper LED conversions that use non-resistored bulbs. From map and dome lights to vanity mirrors, glove box, trunk, and courtesy door illumination, this kit covers every interior position in a single purchase. The result is a noticeably brighter, cooler-white cabin that looks as modern as it performs — with a claimed lifespan of up to 50,000 hours and no complicated wiring required. What's Included by Generation Select the package that matches your F-150's model year. Each kit includes an installation tool. 💡 Map Light Bulbs 2–4 pcs depending on year 🔆 Dome Light Bulbs 1–3 pcs depending on year 🪞 Vanity Mirror Lights 2–4 pcs, 1997–2020 models 📦 Glove Box Bulb 1 pc across all applicable years 🚪 Courtesy Door Lights 1–2 pcs on select models 🛻 Trunk / Cargo Lights 1–2 pcs depending on year 🦶 Courtesy Footwell Lights 2 pcs — 2015–2020 only 🔦 Spare Bulbs 2 pcs included with every kit 🔧 Installation Tool 1 pc — trim removal / pry tool Product Highlights Super-bright output — significantly outperforms factory incandescent bulbs 100% Canbus error-free — no warning lights or ECU fault codes Direct plug-and-play fit into OEM sockets — no wiring required Generation-specific kits — correct bulb count for your exact F-150 year Up to 50,000 hours rated lifespan — long-term investment in your truck Cool white light — modern aesthetic matching current factory LED standards Low power draw — reduced load on your truck's electrical system Engineered heat resistance — stable performance in high-temperature environments Spare bulbs included — immediate replacement on hand if ever needed Installation tool included — no need for additional equipment to get started Compatibility Table Ford F-150 Generation Year Range Kit Size Fitment F-150 8th Generation 1992–1996 9 Pieces Direct Fit F-150 9th Generation 1997–2003 12 Pieces Direct Fit F-150 10th Generation 2004–2008 14 Pieces Direct Fit F-150 11th Generation 2009–2014 13 Pieces Direct Fit F-150 12th Generation 2015–2020 17 Pieces Direct Fit F-150 Raptor / Limited variants All covered years Year-dependent Verify Before Purchase F-150 2021–Present 2021+ N/A Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–45 minutes  ·  Tools Required: Included Ensure all interior lights are switched off before beginning. Factory incandescent bulbs retain heat — allow a few minutes to cool before handling if recently used. Use the included pry tool to carefully remove the lens cover of each light fitting. Work gently around the edges to avoid scratching the surround. Extract the original bulb from its socket. Note the orientation and bulb type before removal to make reinsertion of the LED straightforward. Insert the replacement LED bulb into the same socket. Most are festoon-type; ensure the metal end caps are seated firmly in the spring clips. If the bulb feels slightly loose in the socket, gently pinch the metal pin clips slightly closer together to create a more secure, tighter grip on the festoon. Switch the light on to test before refitting the lens cover. If the bulb does not illuminate, rotate it 180° — LEDs are polarity-sensitive unlike incandescent bulbs. Once confirmed working, refit the lens cover and move to the next position. Repeat across all locations in the kit. ⚠ Note: Always verify your F-150's model year before selecting a kit. If you are unsure which generation your truck falls into, cross-reference via your VIN or consult your owner's manual. Installing a mismatched kit will result in incorrect bulb types for certain positions. Upgrade Your F-150's Interior Today A brighter, cleaner cabin is one of the simplest and most satisfying upgrades you can make to your F-150. Shop with confidence — backed by our 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS, and TNT. Shop Ford F-150 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Ford Motor Company. Ford and F-150 are registered trademarks of Ford Motor Company. All trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious · Interior Lighting · Hyundai Canbus LED Interior Lighting Kit – Hyundai i10, i20, i30, i40, Tucson & Santa Fe Complete plug-and-play interior LED upgrade with canbus error-free technology for 15+ Hyundai models—no warning lights, 50,000-hour lifespan. Canbus Error-Free Plug & Play 2005–2020 Models 7–19 Piece Kits Super Bright LED Overview Whether you're upgrading a Hyundai i10, i20, i30, Tucson, or Santa Fe, quality interior lighting transforms both the ambiance and functionality of your cabin. Factory halogens age quickly, lose brightness, and create hot spots—this comprehensive LED kit solves all three problems with a modern, evenly-lit interior. Our canbus-compatible LED interior kit includes dome lights, map lights, trunk, license plate, vanity mirrors, courtesy lights, and footwell bulbs—depending on your model and year. Every bulb is engineered for direct plug-fit installation into original sockets with zero ECU errors or warning lights. Designed for long-term reliability, each LED reaches up to 50,000 hours of operation while consuming significantly less power than halogen equivalents. Installation takes 30 minutes and requires no soldering, wiring, or permanent modifications. What's Included 💡 Dome & Map Lights Front and rear ceiling fixtures 🚪 Door Courtesy Lights Footwell and door-panel illumination 🪞 Vanity Mirror Lights Sun-visor and makeup mirror LEDs 📦 Trunk & Glove Box Cargo and storage compartment lighting 🔌 License Plate LEDs Rear registration illumination 🔧 Installation Tool Plastic clip removal and socket access Product Highlights 100% canbus error-free—no ECU warnings or dashboard errors Super-bright output with even light distribution across the cabin Plug-and-play direct fit into original OEM sockets 50,000-hour LED lifespan vs. 1,000-hour halogen bulbs Reduced power draw—minimal impact on battery and alternator Perfect heat resistance design with integrated thermal management Model-specific kits (7–19 pieces per model year variation) No soldering, wiring, or ECU modifications required Professional-grade quality with fast, easy installation Compatible with 2005–2020 Hyundai sedans and SUVs Compatibility & Model-Specific Kits Model & Year Range Kit Size Fit Hyundai i10 (2007–2019) 8 pieces Direct Fit Hyundai i20 (2008–2014) 8 pieces Direct Fit Hyundai i20 (2015–2020) 11 pieces Direct Fit Hyundai i30 (2007–2011) 10 pieces Direct Fit Hyundai i30 (2012–2016) 12 pieces Direct Fit Hyundai i30 (2017–2020) 12 pieces Direct Fit Hyundai i40 (2011–2019) 19 pieces Direct Fit Hyundai ix20 (2010–2016) 9 pieces Direct Fit Hyundai ix35 (2010–2015) 11 pieces Direct Fit Hyundai ix55 (2006–2015) 14 pieces Direct Fit Hyundai Tucson (2005–2009) 12 pieces Direct Fit Hyundai Tucson (2010–2015) 11 pieces Direct Fit Hyundai Tucson (2016–2020) 11 pieces Direct Fit Hyundai Santa Fe (2001–2006) 7 pieces Direct Fit Hyundai Santa Fe (2006–2012) 14 pieces Direct Fit Hyundai Santa Fe (2013–2020) 11 pieces Direct Fit Installation Notes Difficulty: Beginner | Time: 20–30 minutes Turn off the engine and all interior lights. Allow fixtures 5 minutes to cool—halogen bulbs run hot. Locate the bulb socket you want to replace (dome, map, trunk, license plate, etc.). Gently remove the halogen bulb by pushing and twisting counterclockwise. Avoid touching the new LED bulb filament with bare hands. Insert the new LED bulb into the socket by pushing and twisting clockwise until it seats firmly. Adjust the metal clip pins closer together if the bulb sits slightly loose—this ensures a tight, secure contact. Test the light by turning on the interior cabin lights or headlights (for license plate and exterior fixtures). Repeat for all remaining bulbs in your kit (7–19 bulbs depending on model). ⚠ Important: Do not mix LED and halogen bulbs in the same circuit. Replace all bulbs of the same type (dome, map, etc.) at once for consistent brightness and color temperature. If a warning light appears on your dashboard, check that each bulb is seated fully in its socket. Ready to Upgrade Your Hyundai's Interior? Transform your cabin with bright, modern LED lighting that lasts 50 times longer than factory halogens. Zero errors, zero hassle, pure plug-and-play simplicity. Shop Canbus LED Kits Use code 22GET20 for 20% off when you purchase any two kits or accessories. 30-Day Money Back 4.9★ Rating · 12,300+ Reviews Worldwide Shipping · DHL, FedEx, UPS 📞 +44 203 943 9919 Victorious Automotive is an independent automotive accessories specialist and is not affiliated with, endorsed by, or connected to Hyundai Motor Company, Jaguar Land Rover Limited, or any original equipment manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. Product compatibility is provided as guidance; please verify fitment with your specific vehicle VIN or contact our team before purchase.

Automotive · Nissan Qashqai · Interior Lighting Interior LED Light Kit for Nissan Qashqai J10 J11 (2007–2020) Complete canbus LED lighting upgrade with 13 precision bulbs for dome, map, vanity, trunk, and licence plate lights—no error codes, plug-and-play installation. Qashqai J10 J11 2007–2020 Canbus Error-Free 13-Piece Kit Plug & Play 50,000 Hour Life Overview Transform your Qashqai's interior ambience with this comprehensive LED lighting kit, engineered specifically for J10 and J11 models spanning 2007 to 2020. Modern ownership demands that every detail—including cabin lighting—matches your vehicle's potential. This kit delivers 13 premium LED bulbs covering every critical interior lighting point: front and rear dome/map lights, vanity mirror lamps, trunk illumination, licence plate lighting, and backup spares. Each bulb is factory-engineered to integrate seamlessly with your Qashqai's onboard electronics, eliminating ECU errors and warning lights that often plague cheaper LED retrofits. The result is brighter, whiter, more modern cabin ambience with zero installation complexity. Turn off your lights, swap the old bulbs for new, and enjoy an immediate upgrade that makes every drive—day or night—more refined and functional. Superior heat management ensures longevity; your investment is backed by 50,000 hours of reliable operation. What's Included 💡 Front Dome/Map Lights 3 bulbs 💡 Rear Dome/Map Lights 2 bulbs (1 for sunroof models) 💄 Vanity Mirror Lights 4 bulbs (where fitted) 🚪 Trunk Light 1 bulb 📍 Licence Plate Lights 2 bulbs ⚡ Spare Bulbs 2 bulbs 🔧 Installation Tool Included Product Highlights 100% Canbus Error-Free — no ECU warnings or fault codes Super Bright Output — modern white tone, high lumen efficiency Direct Fit Design — drops into original sockets without modification Low Power Draw — reduces strain on vehicle battery and charging system Premium Heat Management — thermal-engineered for reliability in tropical and cold climates 50,000 Hour Lifespan — outlasts stock halogen and early LED alternatives Complete Coverage — 13 bulbs cover every interior and exterior light point Tool Included — plastic removal tool prevents damage to trim during installation Tested Compatibility — engineered for J10 (2007–2013) and J11 (2014–2020) platforms Money-Back Assurance — 30-day guarantee if you're not satisfied Compatibility Model Year Range Compatibility Nissan Qashqai J10 2007–2013 Direct Fit Nissan Qashqai J11 2014–2020 Direct Fit Nissan Qashqai +2 (J10) 2008–2014 Direct Fit Other Nissan/Non-Qashqai Any Not Compatible Note: Some models may lack vanity mirror lights in the original equipment. Select the correct trim type during checkout to ensure accurate kit contents. Installation Difficulty: Beginner | Time: 20–30 minutes Disconnect power: Switch off all cabin and exterior lights. Allow the vehicle to sit for 2–3 minutes to ensure bulbs are cool to touch. Remove trim (if needed): Using the supplied plastic tool, carefully prise dome light lens covers downward. Avoid twisting metal clips. Extract old bulbs: Gently twist the old halogen or incandescent bulb anticlockwise, then pull straight out of the socket. Insert LED bulb: Align the LED bulb with the socket and push straight in. Twist clockwise until seated firmly. Do not force. Secure metal clips: If the bulb feels slightly loose, carefully bend the metal retention clips closer together to grip the bulb housing tighter. Replace lens cover: Press the dome light cover back into place until it clicks. Ensure it sits flush with the headliner. Test all lights: Switch on ignition and activate each light circuit (dome, map, vanity, trunk, licence plate) to confirm operation. Verify no error codes: The canbus design eliminates ECU warnings, but a brief dashboard scan confirms no faults were triggered. Safety tip: Never touch halogen bulbs with bare skin. Natural oils cause premature failure and breakage. Always wear cotton gloves or use a clean cloth. Ready to Upgrade Your Qashqai's Interior? One kit. Thirteen bulbs. Complete cabin transformation. This is the simplest, most reliable way to modernise your Qashqai's interior lighting—and enjoy 50,000 hours of bright, error-free operation. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 – 12,300+ verified reviews 📞 +44 203 943 9919 – Mon–Fri 9am–7pm 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Nissan Motor Corporation, Renault Group, or any Land Rover and Range Rover entities. All vehicle names and badges are registered trademarks of their respective manufacturers. This product is an aftermarket accessory designed for fitment to compatible vehicles. Installation may void certain manufacturer warranties. Please consult your vehicle's manual or a qualified technician if unsure about compatibility or installation procedures.

Automotive · Skoda · Interior Lighting Interior LED Light Kit – Skoda Fabia MK1, MK2, MK3 (1999-2015+) Premium Canbus LED bulb set for Fabia dome, map, trunk and door lights with error-free installation and 50,000-hour lifespan. Skoda Fabia MK1 MK2 MK3 1999–2015+ Canbus Error-Free LED Overview The Skoda Fabia—from its 1999 debut through the current MK3 generation—deserves interior lighting that matches its clean, modern design. This comprehensive LED light kit transforms your cabin with bright, cool-white illumination across dome, map, trunk, door and glove box fixtures. Each bulb is engineered with full Canbus compatibility, eliminating the ECU errors and dashboard warnings that plague standard LED conversions. Installation takes minutes—everything is plug-and-play into original sockets. No wiring, no modifications, no regrets. With a certified 50,000-hour lifespan and robust thermal management, these bulbs deliver consistent brightness for the life of your Fabia. Whether you own a classic MK1 or the latest model year, we've included the exact bulb count your generation requires. What's Included 💡 Dome & Map Lights Front cabin illumination 🔦 Rear Cabin Lights Passenger area coverage 🚪 Door & Puddle Lights Entry lighting & ambience 📦 Trunk Light Boot visibility & load access 🧰 Installation Tool Safe bulb removal & fitting ⚡ Glove Box Light MK2 & MK3 models included Product Highlights 100% Canbus Compliant – Zero ECU errors, no dashboard warnings Super-Bright Output – Crisp white light, modern appearance Plug-and-Play Install – Direct fit into original sockets, no wiring 50,000-Hour Lifespan – Long-term reliability and value Advanced Thermal Design – Perfect heat resistance and durability Low Power Consumption – Minimal battery drain vs. halogen Generation-Specific Kits – MK1 (12pc), MK2 (13pc), MK3 (10pc) Premium LED Bulbs – High-quality electronics and optics Secure Fitting Clips – Adjustable metal pins prevent loose bulbs Complete Package – Everything needed; nothing extra to buy Compatibility & Kit Contents Generation Model Years Bulb Count Compatibility Fabia MK1 1999–2007 12 pieces Direct Fit Fabia MK2 2008–2014 13 pieces Direct Fit Fabia MK3 2015+ 10 pieces Direct Fit Installation Notes Difficulty Level: Beginner Estimated Time: 15–20 minutes Turn off all interior lights and allow bulbs to cool completely. Carefully remove the original halogen bulb from its socket—handle with care to avoid burns. Insert the new LED bulb into the socket until it clicks or seats fully. Gently adjust the metal pin clips to hold the bulb firmly in place, preventing any movement. Repeat for all dome, map, door, trunk, and glove box fixtures. Turn on lights and verify all fixtures illuminate correctly. Important: Always wait for the old bulbs to cool before removal. If a bulb feels loose after installation, carefully bend the retaining clips slightly inward to increase tension. Never force a bulb into place. Ready to Brighten Your Fabia? This premium LED interior kit gives your Skoda Fabia the modern, clean lighting it deserves—without compromise, complexity, or error codes. Direct fit, Canbus-safe, and backed by our 30-day guarantee. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 stars – 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Skoda, Volkswagen Group, or any official manufacturer. All product names and logos are trademarks of their respective owners, used only for identification and compatibility purposes. Vehicles and parts mentioned are sold for aftermarket accessory fitment only.

```html Smart · Fortwo & Forfour · Interior Lighting Interior LED Lighting Kit for Smart Fortwo & Forfour (1998–2020) Canbus error-free LED interior lights with 50,000-hour lifespan—brighter, cleaner, cooler than factory halogen. Fortwo MK1–MK3 Forfour MK1–MK2 1998–2020 Canbus Ready Error-Free Plug & Play Overview Smart Fortwo and Forfour interiors deserve lighting that matches their modern, purposeful design. Factory halogen dome, map, and reading lights feel dim and dated—and they waste power. This Canbus-compatible LED interior lighting kit replaces every interior light in your Fortwo or Forfour with pure white, 50,000-hour LEDs that install in minutes. Each kit is tailored to your specific model year and generation. Choose from Fortwo MK1/MK2/MK3, Fortwo Electric Drive variants, Forfour MK1/MK2, or Forfour EQ models. Dome lights, map lights, reading lights, license plate lights, trunk lights, and glove box lights are all included—with mounting hardware and installation tools. Canbus technology means zero ECU errors, no dashboard warning lights, and no flickering. Power draw is minimal; brightness is maximum. Installation is straightforward: remove the old bulb, insert the LED, clip it tight, and you're done. What's Included 💡 LED Bulbs Full interior set tailored to your model 🔧 Installation Tool Plastic removal tool for safe bulb extraction ✓ Mounting Clips Secure festoon mounting hardware included 📋 Instructions Step-by-step installation guide Product Highlights Canbus technology—zero ECU or dashboard errors 50,000-hour LED lifespan vs. 1,000-hour halogen Pure white 6500K color temperature Super-bright output with minimal power draw Direct fit to original sockets—plug and play Thermal management design prevents overheating No flickering, no dimming, stable operation Works with factory wiring and electronics Includes mounting clips for tight, rattle-free fit Compatible with all 1998–2020 Fortwo & Forfour variants Compatibility Model & Year Range Kit Size Compatibility Fortwo MK1 450 (1998–2007) 4-piece Direct Fit Fortwo MK2 (2007–2014) 9-piece Direct Fit Fortwo MK3 453 (2015–2019) 5-piece Direct Fit Fortwo Electric Drive (2010–2014) 3-piece Direct Fit Fortwo Electric Drive EQ (2015–2019) 5-piece Direct Fit Forfour MK1 454 (2004–2006) 8-piece Direct Fit Forfour MK2 453 (2015–2019) 7-piece Direct Fit Forfour EQ Passion (2017–2020) 5-piece Direct Fit Installation Difficulty: Easy | Time: 15–30 minutes Power off. Turn off all interior lights and close the door. Allow any recently used bulbs to cool for 2–3 minutes. Remove old bulb. Use the provided plastic removal tool to gently pry the old halogen bulb from its socket. Do not force it. Insert LED. Align the LED bulb's pins with the socket and push firmly until it seats completely. Secure mounting clips. Slide the metal clip arms closer together so they grip the LED bulb tightly. The bulb should not move or rattle. Test. Turn on the light to confirm it works. Repeat for all bulbs in the kit. Enjoy. Your Smart interior is now brighter, cleaner, and more modern. Important: Always allow bulbs to cool before removal. Handle the LED bulb by its plastic base only—do not touch the metal pins or dome. If a bulb is slightly loose after installation, tighten the metal clip arms further until it's secure. Transform Your Smart Interior Today Upgrade to Canbus error-free LED lighting and enjoy 50,000 hours of pure white brilliance. Easy install, zero errors, maximum brightness. Shop Interior LED Kits Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 Stars • 12,300+ Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS ✓ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 (Mon–Fri, 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Smart, Daimler-Benz, or any manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed as an aftermarket accessory and is sold for personalization and customization purposes only. Installation may void certain vehicle warranties—please consult your Smart dealer or warranty documentation before proceeding. ```

Automotive · Volkswagen · Interior Lighting Interior LED Canbus Light Kit – VW Polo 6N 6N1 6N2 9N 9N3 6R 6C (1994–2017) Complete plug-and-play dome, map, vanity mirror, and trunk LED upgrade. 100% canbus error-free, 50,000-hour lifespan, zero ECU warnings. VW Polo 1994–2017 Canbus LED Plug & Play Interior Lighting No ECU Errors Overview The Volkswagen Polo has evolved across six generations since 1994, and regardless of your model year—whether you own a 6N from the mid-'90s, a 9N from the early 2000s, or a 6R/6C from the modern era—interior lighting plays a critical role in both functionality and ambiance. OEM bulbs dim over time and generate unnecessary heat. This canbus-compatible LED kit transforms your cabin with bright, cool-white illumination while maintaining complete electrical harmony with your vehicle's onboard computer. Our Zoomsee interior LED kit supplies the highest-quality festoon bulbs engineered specifically for VW Polo interiors. Every bulb in the kit meets strict brightness standards, offers superior heat resistance, and integrates seamlessly into your original sockets. No error codes. No warning lights. No guesswork—just instant, modern lighting that makes every drive more comfortable and your cabin more premium. Each kit is tailored to your exact Polo generation, with generation-specific bulb counts and locations. Whether you need a 5-piece kit for 6N models or an 8-piece set for 9N/6R/6C variants, every item you receive is pre-selected and ready to install in under 30 minutes. What's Included 💡 Front Dome & Map Light Ultra-bright LED festoon (6N: 1pc | 9N/6R: 3pc) 💡 Rear Dome & Map Light Dual overhead ceiling LEDs (all models: 2pc) ✨ Vanity Mirror Lights Driver & passenger sun visor LEDs (9N/6R/6C: 2pc) 🔦 Trunk/Boot Light Bright cargo illumination (6N: 2pc | 9N/6R: 1pc) 🔧 Installation Tool Soft pry tool to safely remove original festoons 📋 Installation Guide Step-by-step English instructions included Product Highlights 100% Canbus Error-Free – No ECU warnings, no dashboard error messages Super Bright White Light – Modern, premium cabin ambiance 50,000-Hour Lifespan – Far outlasts OEM halogen bulbs Plug & Play Design – Direct fit into original sockets; zero modifications Low Power Consumption – Reduces strain on your electrical system Excellent Heat Resistance – Engineered for durability in tight cabin spaces Metal Pin Clip Design – Secure mounting; no loosening over time Generation-Specific Kits – Right bulb count for 6N, 9N, or 6R/6C Professional Quality – Trusted by detail shops and Polo enthusiasts Easy Removal Tool Included – Safe, damage-free bulb extraction Compatibility by Polo Generation Model Code Years Bulb Count Status 6N / 6N1 1994–1998 5 pieces Direct Fit 6N2 1999–2001 5 pieces Direct Fit 9N 2002–2005 8 pieces Direct Fit 9N3 2005–2009 8 pieces Direct Fit 6R 2009–2014 8 pieces Direct Fit 6C 2014–2017 8 pieces Direct Fit Installation & Setup Difficulty: Beginner | Time: 15–30 minutes Turn off all interior lights and the engine. Allow bulbs to cool completely before handling (they get hot). Locate the first bulb socket (typically front dome light). Use the supplied pry tool to gently pop out the original festoon bulb by pressing on the metal clips. Insert the new LED festoon directly into the empty socket. It will click into place. Adjust the metal pin clips by carefully bending them slightly inward to ensure a snug, secure fit. The bulb should not move if you gently tug it. Repeat steps 2–4 for all remaining locations (rear domes, vanity mirrors, trunk light). Turn on your lights and inspect each area. All LEDs should illuminate instantly with no flicker or dimming. Drive normally. No error codes should appear on your instrument cluster. ⚠️ Important: If you notice flickering or a bulb is not snug in the socket, power off and re-seat it using the adjustment technique in step 4. Loose connections can cause intermittent operation. Do not force bulbs into sockets; they should slide in smoothly. Upgrade Your Polo Interior Today Don't settle for dim, aging halogen bulbs. This complete canbus LED kit is the fastest, safest way to modernize your VW Polo's cabin lighting—whether you drive a late-'90s 6N or a 2010s 6R. Bright, reliable, error-free illumination with a 50,000-hour guarantee. Shop VW Polo LED Kits Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews 🚚 Worldwide shipping DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessory specialist. We are not affiliated with, endorsed by, or connected to Volkswagen AG, Audi Group, or any official VW dealer network. All vehicle references are used for fitment identification only. Product names and compatibility are provided in good faith. Always verify fitment with your local VW service centre before purchase if you have any doubt about your model year or variant.

Victorious Automotive · Range Rover Evoque · Interior Lighting Interior LED Light Kit for Range Rover Evoque – Full Cabin Upgrade (2005–2023) Transform every journey inside your Evoque with a precisely engineered LED interior kit — brighter, cleaner light across every cabin zone, with zero error codes and no rewiring required. Range Rover Evoque L538 · L551 2005–2023 Canbus Error Free Plug & Play 50,000hr Lifespan Heat Resistant Direct Fit Overview The Range Rover Evoque has always stood apart for its design-led interior — low roofline, premium surfaces and a cabin built to impress. But the factory halogen interior bulbs do very little to complement that effort. They cast a dim, warm-yellow light that dates the interior and leaves door pockets, boot areas and vanity mirrors barely usable in low-light conditions. This LED kit is the single most effective low-cost upgrade you can make to the Evoque's interior presence. Engineered specifically for Land Rover applications across the 2005–2023 model range, each bulb in this kit is fully Canbus-compatible — meaning your instrument cluster will not register a fault, and you will not encounter the blinking or flicker that cheaper universal LEDs are notorious for. The output is a clean, neutral-to-cool white that transforms the cabin feel from factory-standard to genuinely modern, without touching a single wire. Whether you drive an early L538 Evoque or the current L551 generation, this kit has been verified for direct fitment across all trim levels. Installation requires no professional expertise — the complete kit including a pry tool can be fitted in under 30 minutes at home, making this one of the most rewarding upgrades in the Victorious range. What's Included 💡 Front Map / Dome Light Model-specific LED bulb for front overhead reading and dome positions 💡 Rear Map / Dome Light Rear passenger overhead illumination — direct replacement bulb 🪞 Vanity Mirror Lights Available in select packages — sun visor mirror illumination 🗄️ Glove Box Light Available in select packages — interior glove compartment LED 📦 Trunk / Boot Light Available in select packages — load area LED replacement 🔧 Installation Pry Tool Trim-safe removal tool included to protect interior panels Product Highlights Super bright LED output for a noticeably improved cabin ambiance 100% Canbus error-free — no dashboard warnings or fault codes True plug-and-play fitment — no wiring, no modifications Up to 50,000 hours operational lifespan — essentially lifetime fit Heat-resistant construction for safe long-term cabin use Clean neutral-white light output matching modern premium interiors Energy efficient — draws significantly less power than OEM halogens Engineered specifically for Land Rover / Range Rover electrical systems Compatible with all trim levels across 2005–2023 model years Includes trim-safe pry tool — no additional tools required Compatibility Model Code Years Fitment Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–2023 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2020 Direct Fit Land Rover Freelander 2 L359 2006–2014 Direct Fit Land Rover Discovery 3 L319 2005–2009 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2023 Direct Fit Range Rover Vogue L460 2022–2026 Verify Before Order Range Rover Sport L461 2022–2026 Verify Before Order Not sure which variant fits your vehicle? Call us on +44 203 943 9919 Mon–Fri, 9am–7pm and we'll confirm your fitment before you order. Installation Guide 🔧 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Included Pry Tool Only Ensure all interior lights are switched off and the ignition is fully off before beginning. Allow any existing bulbs a few minutes to cool if the vehicle has been recently used. Using the included trim-safe pry tool, carefully lever open the lens cover on each light fitting — start at one edge and work around gently to avoid cracking the housing. Remove the existing halogen or incandescent bulb from its socket. Twist or pull depending on your specific fitting type — refer to your Evoque owner's manual if unsure of bulb type. Insert the corresponding LED replacement bulb from this kit. Ensure the pins seat fully into the socket. If LEDs do not illuminate after testing, rotate the bulb 180° — polarity is the most common cause of non-illumination. Snap the lens cover back into position. Turn on the interior lights and verify full illumination. Repeat across all zones included in your selected package. If a bulb feels loose, use a small flat tool to gently widen the metal pin clips inside the socket for a more secure grip. ⚠ Caution: Do not handle removed halogen bulbs immediately after use — they retain significant heat. Allow cooling before disposal. Do not apply excessive force when removing lens covers on the L551 Evoque as the housings use a clip-and-slot retention system that can crack under pressure. Shop by Your Evoque Browse the full accessory range curated specifically for your generation of Range Rover Evoque: 🔗 Evoque L538 (2011–2018) Full accessory collection for first-gen Evoque 🔗 Evoque L551 (2019–2023) Full accessory collection for second-gen Evoque Upgrade Your Evoque Interior Today Thousands of Land Rover and Range Rover owners across the UK and worldwide have transformed their cabins with this exact kit. Join them — and see the difference quality LED lighting makes from the first switch-on. Shop Evoque Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and model references are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Trim Upgraded Interior Loudspeaker Cover for 2024 Toyota Land Cruiser 250 (LC250) A precision-fit stainless steel speaker cover that refines the cabin aesthetic of the LC250 while protecting the factory door panel beneath. LC250 2024 Stainless Steel Direct Fit No Tools Required Black & Silver Interior Trim Adhesive Install Overview The 2024 Toyota Land Cruiser 250 is a machine built on decades of legend — rugged enough to traverse the world's harshest terrain, yet refined enough to demand a premium interior worthy of its reputation. Owners who live with the LC250 daily know that the details matter: every surface, every finish, every panel tells a story about intent and quality. This upgraded loudspeaker cover is designed specifically for the LC250's door trim architecture, delivering a seamless integration that looks factory-correct from every angle. Crafted from high-grade stainless steel and available in a choice of gloss black or brushed silver, the cover replaces the visual monotony of the OEM grille with a sculpted, upmarket finish that genuinely elevates the feel of the cabin. Beyond aesthetics, the cover serves a practical purpose — shielding the original factory panel from incidental contact, moisture ingress, and the inevitable wear that comes with daily use. Installation requires no specialist tools and no permanent modification to your vehicle. If you're curating the interior of your LC250 with the same attention you give to its capability, this cover is a natural addition. What's Included 🔊 Loudspeaker Cover × 1 Precision-fit for 2024 LC250 door trim 🧲 Pre-Applied Adhesive Industrial-grade 3M-style backing tape 📄 Installation Guide Step-by-step printed instructions included 🧤 Protective Packaging Foam-lined to prevent transit damage Product Highlights Precision-engineered fit for the 2024 Toyota Land Cruiser 250 LC250 Premium stainless steel construction — resistant to corrosion and warping Available in gloss black and brushed silver to match your interior trim Adhesive installation — no drilling, cutting or specialist tools required Protects the factory door panel from everyday wear and contact damage Seamless OEM-style fitment — sits flush with surrounding trim panels Maintains full acoustic performance — does not obstruct speaker output Reversible installation — removable without damage to original surfaces Easy single-person install completable in under 15 minutes per cover Elevates cabin sophistication without permanent modification to the vehicle Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser 250 (LC250) 2024 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Variants Not Compatible Toyota Land Cruiser 200 (LC200) 2007–2021 All Variants Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with a clean, dry interior — ensure the target door panel area is free from dust, oils, and moisture for maximum adhesive performance. Hold the loudspeaker cover up to the door panel and confirm alignment with the factory speaker grille before committing to installation. Peel back the protective film from the pre-applied adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface. Press the cover firmly into position, applying steady even pressure across the entire surface for a minimum of 30 seconds to ensure a secure bond. Allow the adhesive to cure at room temperature for at least 1 hour before exposing the panel to direct sunlight or moisture. ⚠ Important: Clean the panel with an isopropyl alcohol wipe prior to installation. Do not install in temperatures below 10°C (50°F) as adhesive performance may be reduced. Ensure the vehicle has been parked and the panel is at ambient temperature before beginning. Upgrade Your LC250 Interior Today Small details define great interiors. This loudspeaker cover is one of the simplest, most impactful upgrades you can make to the cabin of your 2024 Land Cruiser 250 — and it ships worldwide via DHL, FedEx, UPS, and TNT. Shop All LC250 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL & FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle variant before purchase.

Victorious · LC300 · Interior Trim Interior Vent Covers for Toyota Land Cruiser 300 Premium ABS vent trim upgrade for 2021–2024 LC300 with carbon fibre or matte silver finishes. LC300 2021-2024 ABS Material Two Finishes Easy Install Overview The Toyota Land Cruiser 300 has earned its reputation as one of the world's most capable luxury SUVs. Like every serious LC300 owner, you understand that the interior deserves the same attention to detail as the exterior. These custom-fit interior vent covers elevate your cabin's visual presence while protecting your original vents from dust and wear. Engineered specifically for 2021–2024 LC300 models, these covers are manufactured from premium ABS plastic and finished in your choice of authentic carbon fibre pattern or sophisticated matte silver. The seamless design complements the factory interior without any cutting, modification, or permanent alteration to your vehicle. Installation takes minutes with the included automotive-grade adhesive—no tools required. These are the kind of thoughtful upgrades that set apart the LC300 owner who knows that it's the details that define the drive. What's Included 📦 Vent Cover Set Complete set for interior vents 🧴 Adhesive Automotive-grade application tape 📖 Fitting Guide Step-by-step installation instructions Highlights Custom engineered for 2021–2024 LC300 Carbon Fibre or Matte Silver finishes Premium ABS construction Plug-and-play installation Preserves factory vent functionality Adhesive included in box Enhances interior grade and refinement Dust and dirt protection Factory-matched fit and finish No drilling or modification required Compatibility Model Years Status Toyota Land Cruiser 300 (LC300) 2021–2024 Direct Fit LC300 Pre-2021 2020 and earlier Not Compatible LC250 2024+ Not Compatible Other Toyota / Land Rover models All years Not Compatible Installation Easy Fit Installation (5–10 minutes) Clean the surface: Wipe interior vent area with a dry, lint-free cloth to remove dust and oils. Position the cover: Dry-fit the vent cover to ensure proper alignment with the original vent. Apply adhesive: Peel back the backing and apply the included automotive tape evenly across the back of the cover. Press and hold: Firmly press the cover into place for 10–15 seconds to ensure full contact. Allow curing: Wait 24 hours before driving to allow adhesive to fully cure. Note: Ensure proper surface cleaning before installation. Do not apply to wet, dusty, or greasy surfaces. Adhesion may be compromised on poorly prepared areas. Ready to Refine Your LC300 Interior? Upgrade your cabin aesthetics with vent covers designed to complement the sophistication of your Land Cruiser 300. Two premium finishes, factory fit, zero compromise. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ 4.9★ across 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Mon–Fri 9am–7pm support: +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, or Jaguar Land Rover. All product names, logos, and brands remain the property of their respective owners. This product is designed as an aftermarket upgrade for the specified vehicle models.

Jaguar · F-PACE X761 · Interior Storage Interior Storage Box & Cup Holder Tray — Jaguar F-PACE X761 Compact, precisely fitted storage solution for coins, cards, and daily essentials—keeps your cabin organised without fuss. X761 / XFL 2016–2017 Premium Plastic Direct Fit Black OEM Integration Overview The Jaguar F-PACE (X761 / XFL, 2016–2017) deserves storage that matches its refined interior. This purpose-built storage box and cup holder tray integrates seamlessly into your cabin, providing practical organisation without disrupting the cabin's clean aesthetic. Manufactured in high-grade plastic with ISO9001 quality assurance, this tray holds small items—coins, credit cards, receipts, name cards—exactly where you need them. It's designed to slot directly into your F-PACE's interior architecture, requiring no modification to the vehicle. For owners who value both function and finish, this is the understated solution that transforms wasted cabin space into usable storage. Every detail has been engineered for your F-PACE. What's Included 📦 Storage Box Tray Full-sized cup holder + storage compartment ⚙️ Mounting Hardware Pre-fitted for F-PACE integration 📋 Installation Guide Quick-reference instructions included ✓ Quality Certified ISO9001 standard compliance Product Highlights Dedicated cup holder + coin/card storage in one unit High-grade moulded plastic construction (50g, compact design) ISO9001 quality certified for durability Black finish matches F-PACE interior trim Direct fit—no modifications required Holds credit cards, receipts, coins, name cards Precisely engineered for X761 / XFL models Easy installation in under 10 minutes Maintains original cabin aesthetics Perfect complement to F-PACE interior upgrades Compatibility Model Year Code Fitment Jaguar F-PACE 2016 X761 Direct Fit Jaguar F-PACE 2017 X761 / XFL Direct Fit Other Jaguar Models — — Not Compatible Installation Notes Difficulty: Beginner | Time: 5–10 minutes Locate the designated storage compartment in your F-PACE's interior cabin area (typically centre console or upper dashboard section). Unpack the tray and verify all components match your vehicle's year code (X761 or XFL). Align the mounting tabs with the factory mounting points. No tools required—friction fit. Press firmly until the tray seats fully. You should hear a soft click indicating secure installation. Test stability by gently pressing on the tray from multiple angles. It should not shift. Place coins, cards, or small items into the storage compartment to confirm capacity. Note: This tray integrates into existing cabin architecture. If your F-PACE has been heavily modified or has aftermarket interior trim, verify compatibility before installation. In rare cases, minor trim adjustment may be needed—proceed carefully. Complete Your F-PACE Interior Storage, organisation, and class—all in one compact piece. This tray is the subtle upgrade that makes daily driving more refined. Order now and transform your cabin. Shop F-PACE Accessories Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews 🌍 Worldwide shipping ✓ 30-day guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar, Jaguar Land Rover, or any OEM manufacturer. All vehicle names and codes are used for identification purposes only. Always verify fitment with your vehicle's VIN or chassis code before purchase.

```html Jaguar Accessories · XE / XFL / F-Pace / E-Pace · Exterior Trim ABS Chrome Carbon Fiber Door Handle Cover Trim for Jaguar XE, XFL, F-Pace & E-Pace Premium exterior door handle covers that elevate your Jaguar's curb appeal with a sleek carbon fiber aesthetic and easy adhesive installation. XE / XFL / F-Pace / E-Pace 2017–2018 ABS Material Carbon Fiber Finish 8-Piece Set Overview If you own a Jaguar XE, XFL, F-Pace, or E-Pace from 2017 onwards, you understand the importance of refined exterior detailing. The stock door handles are functional, but they lack the visual punch that modern owners expect. These ABS chrome carbon fiber door handle covers transform your Jaguar's appearance by adding a layer of premium styling that catches the eye from every angle. This complete set includes eight precision-engineered cover pieces—four for the outer handles and four for inner components. Manufactured in an ISO 9001–certified facility, each cover is molded from durable ABS plastic with a carbon fiber weave finish available in matte black, polished black, or bright chrome variants. The semi-gloss texture resists UV damage and maintains its appearance through seasons of use. Installation is straightforward: the adhesive backing requires no drilling, no modifications to your door mechanism, and no specialized tools. In under 30 minutes, your Jaguar gains a custom, high-end aesthetic that rivals dealer-installed options at a fraction of the cost. Whether you're preparing your car for resale or simply elevating your daily drive, this accessory delivers instant visual impact. What's Included 🎯 8-Piece Cover Set 4 outer + 4 inner door handles 🛡️ Double-Sided Adhesive Pre-applied, no separate glue needed 📦 Protective Packaging OPP bag + secure box ✅ ISO 9001 Certified Factory quality assurance Product Highlights ABS plastic construction with carbon fiber weave finish Fits Jaguar XE, XFL, F-Pace, and E-Pace (2017+) Available in matte black, polished chrome, or bright finish Double-sided adhesive backing—no tools or drilling required Lightweight at 300g total weight for all 8 pieces Pre-assembled and ready to install in under 30 minutes UV-resistant finish resists fading and discoloration Precision-fit design maintains door handle functionality Easy removal if desired—leaves no permanent marks ISO 9001–certified manufacturing quality Compatibility Jaguar Model Year Range Compatibility XE 2017–2018 Direct Fit XFL 2017–2018 Direct Fit F-Pace 2017–2018 Direct Fit E-Pace 2017–2018 Direct Fit X761 2017–2018 Direct Fit Earlier XE / F-Pace 2015–2016 Not Compatible Installation Guide Difficulty: Easy | Time: 25–30 Minutes Clean all door handles: Use rubbing alcohol or a clean cloth to remove dirt, dust, and residue from the outer and inner door handle surfaces. Let dry completely (2–3 minutes). Peel protective film: Remove the clear plastic protective backing from the adhesive side of each cover. Align and press: Carefully position each cover over its corresponding handle, then press firmly for 10–15 seconds to ensure full adhesion. Repeat for all handles: Work through all 8 pieces (4 outer, 4 inner) on both doors and both sides of the vehicle. Allow curing time: Wait 24 hours before opening doors forcefully or exposing to water. This allows the adhesive to fully set. Note: If handles have any protective film, wax coating, or ceramic sealant, use a light adhesive remover or rubbing alcohol first. Surfaces must be clean and dry for optimal adhesion. Test on an inconspicuous area if your handles have any special coating. Ready to Upgrade Your Jaguar? Transform your XE, XFL, F-Pace, or E-Pace with premium door handle covers that combine style, durability, and effortless installation. Thousands of Jaguar owners trust this accessory for instant curb appeal. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars – 12,300+ Verified Reviews 🌍 Worldwide Shipping – DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee – No Questions Asked 📞 Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Jaguar Land Rover plc or any official Jaguar dealership. All product names, logos, and trademarks are property of their respective manufacturers. This product is an aftermarket accessory and is not OEM equipment. ```

Premium Accessories · Jaguar · Interior Styling Jaguar XF F-PACE E-PACE Start Stop Aluminum Trim – 2016–2018 Precision-engineered aluminum ignition button surrounds that elevate your cabin's interior with factory-finish detailing and refined aesthetics. XF / F-PACE / E-PACE 2016–2018 Aluminum Start Stop Trim Interior Moulding 2-Piece Set Overview Jaguar's XF, F-PACE, and E-PACE models (2016–2018) demand attention to detail in every touchpoint. The ignition button area is one of the most frequently accessed elements in your interior, yet it often comes from the factory with plain, understated trim. These premium aluminum Start Stop surrounds completely transform that experience—replacing plastic-looking covers with authentic brushed or polished aluminum that catches light and commands respect. This two-piece set is engineered to fit directly over your factory ignition button and switch assembly. Each piece is CNC-cut from aerospace-grade aluminum and finished to match the sophisticated aesthetic of your Jaguar's cabin. Whether you pair them with the sleek silver variant or the bold red finish, you're introducing a layer of personalization that speaks to discerning owners who refuse to overlook the small details. Lightweight, corrosion-resistant, and tested to ISO9001 standards, these trims aren't decorative gimmicks—they're thoughtful engineering. Install them yourself in under 10 minutes, or have a technician handle it. Either way, you'll feel the difference every time you press that button. What's Included ⚙️ 2× Aluminum Trim Surrounds Brushed or polished finish; left and right orientation 🧴 Pre-Applied Adhesive Backing Factory-strength 3M tape; ready to install 📋 Installation Guide Multi-language instructions with photos 🛡️ 30-Day Fit Guarantee Full refund if not satisfied; no questions asked Product Highlights Precision-fit design for XF, F-PACE, and E-PACE (2016–2018 model years) 100% aerospace-grade aluminum with corrosion-resistant coating Available in silver (brushed) or red (glossy) finish options ISO9001 certified; tested for durability and safety Pre-applied 3M adhesive tape; no tools required Lightweight at just 0.1 kg per set; zero impact on cabin acoustics Direct-fit; no modifications to factory wiring or switches Enhances cabin ambiance without compromising ignition function Professional finish rivals OEM Jaguar interior detailing Backed by Victorious' 30-day money-back guarantee Compatibility Model Year Range Body Style Fit Status Jaguar XF 2016, 2017, 2018 Sedan Direct Fit Jaguar F-PACE 2016, 2017, 2018 Compact SUV Direct Fit Jaguar E-PACE 2018 Subcompact SUV Direct Fit XF (2019+) 2019 and later Sedan Not Compatible F-PACE (2021+) 2021 and later Compact SUV Not Compatible Note: These trims are engineered for the pre-2019 facelift generation. Newer models feature updated ignition button geometry and require different trim profiles. Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Power off the ignition and allow the cabin to cool to room temperature. Gently clean the area around the start–stop button with a microfiber cloth and isopropyl alcohol. Allow 2 minutes to dry completely. Carefully peel back one aluminum trim surround from its backing card. Do not touch the adhesive side. Align the trim over the ignition button, ensuring the cutout matches the button perimeter exactly. Press firmly for 10 seconds, starting from the center and working outward to eliminate air bubbles. Repeat steps 3–5 for the second trim (opposite side or complementary position, depending on your model). Allow 24 hours for the adhesive to reach full cure strength before using the ignition button. Important: If you're uncomfortable removing interior trim panels, have a professional Jaguar technician complete the installation. The adhesive is permanent; once applied, removal may damage the underlying plastic. Complete Your Jaguar's Interior Small details separate a well-maintained Jaguar from a truly exceptional one. These aluminum Start Stop trims are the kind of upgrade that catches the eye of other enthusiasts and makes every ignition press feel intentional. Pair them with other interior styling upgrades to create a cohesive, premium cabin aesthetic. Shop Start Stop Trims Use code 22GET20 for 20% off any 2 items ✓ 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is not affiliated with Jaguar Land Rover, Jaguar Cars Limited, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for compatibility and is sold as-is. Installation of this product does not void your vehicle's manufacturer warranty, but always consult your dealer or technician for clarification.

Jaguar · Range Rover Evoque · Interior Upgrades Aluminium Steering Wheel Paddle Shifters – Jaguar XF XE XJ F-Pace X761 & Range Rover Evoque (2012–2018) Direct-fit aluminium alloy paddle shifters engineered for Jaguar and Range Rover Evoque steering columns — delivering sharper gear changes and a genuinely tactile driving experience. Range Rover Evoque L538 Jaguar XF · XE · XJ F-Pace X761 2012–2018 Aluminium Alloy Direct Fit No Drilling Model: 1000-542 SNBLO Overview The Range Rover Evoque and Jaguar XF, XE, XJ, F-Pace, and X-Type share a platform philosophy that has always prioritised driver engagement — and the steering column is one of the most tactile touchpoints in that relationship. If your gear selector paddles feel underwhelming, or if you simply want to elevate the interior with a premium upgrade that's felt every time you drive, these aluminium paddle shifters are built precisely for that purpose. Constructed from precision-machined aluminium alloy, the SNBLO 1000-542 paddle shifters replace the factory-fit plastic extensions with a product that genuinely feels at home in a premium British cabin. The solid weight and cool metallic finish transform every upshift and downshift into something more deliberate, more satisfying — particularly when driven in sport or manual mode. Designed specifically for vehicles produced between 2012 and 2018 across the Jaguar and Range Rover Evoque range, these paddle shifters clip securely over your existing steering wheel paddles without any permanent modification. The result is a factory-clean finish with a material upgrade that punches well above the price point. What's Included 🔧 Left Paddle Shifter (–) Aluminium alloy downshift paddle, pre-fitted clip mount 🔧 Right Paddle Shifter (+) Aluminium alloy upshift paddle, pre-fitted clip mount 📋 Fitting Instructions Basic installation guide included in packaging 📦 Protective Packaging Padded box to prevent transit damage to finish Product Highlights Precision-machined aluminium alloy construction for a premium, durable finish Direct clip-on fitment — no drilling, cutting or permanent modification required Compatible with Jaguar XF, XE, XJ, F-Pace X761, X-Type and Range Rover Evoque Covers vehicles from 2012 through to 2018 model years Solid tactile feel that replaces lightweight OEM plastic paddles instantly Subtle, factory-integrated aesthetic that doesn't look aftermarket Lightweight at 300g total — no impact on steering balance or wheel feel Low-profile design at 1cm height, 3cm width, 18cm length for seamless integration Available in polished and brushed aluminium finishes for interior colour matching Straightforward DIY installation achievable in under 15 minutes Compatibility Vehicle Code / Generation Years Fitment Range Rover Evoque L538 2012–2018 Direct Fit Jaguar XF X250 / X260 2012–2018 Direct Fit Jaguar XE X760 2015–2018 Direct Fit Jaguar XJ X351 2012–2018 Direct Fit Jaguar F-Pace X761 2016–2018 Direct Fit Jaguar X-Type X400 2012–2016 Direct Fit Range Rover Evoque L551 (2019+) 2019–2026 Verify Before Purchase Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Installation Notes ⚙️ Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Park your vehicle on a flat surface with the engine off and the steering wheel in its neutral, centred position. Locate the existing factory paddle shifters behind the steering wheel — these will be the left (–) and right (+) paddles. Take the aluminium paddle shifter and align the integrated clip mount with the rear edge of the corresponding factory paddle. Press the aluminium paddle firmly onto the factory paddle, ensuring the clip engages securely and the paddle sits flush against the wheel spoke. Repeat for the second paddle on the opposite side, ensuring both paddles are symmetrically aligned. Test each paddle for secure fitment by pressing gently — there should be no flex, rattle or movement once correctly seated. Start the vehicle and test gear changes in manual or sport mode to confirm full functionality. ⚠ Important: These paddle shifters are designed to clip over existing OEM paddles and do not replace the underlying electrical mechanism. If your factory steering wheel does not include paddle shifters as standard, this product will not add that functionality. Always confirm your vehicle specification before ordering. Upgrade Your Drive with Victorious Automotive Trusted by over 12,300 owners across the UK and worldwide, Victorious Automotive supplies premium accessories built to complement the vehicles that deserve nothing less. Every order ships globally via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification prior to purchase.

Tesla · Model 3 · Interior Storage Key Card Holder for Tesla Model 3 Keep your key card secure and within arm's reach with this precision-engineered acrylic holder that integrates seamlessly into your Model 3's interior. Model 3 2017–2024 Premium Acrylic Quick Install OEM Look Overview Tesla Model 3 owners appreciate a minimalist cabin, but everyday essentials still need a home. Your key card deserves a dedicated space that's both functional and elegant—not rattling around in a cup holder or tucked into a door pocket. This custom-designed key card holder is engineered to fit the specific dimensions of your Model 3's keycard whilst complementing the engine start panel. Machined from premium acrylic with a satin black finish, it keeps your card instantly accessible during every drive without compromising the clean, modern aesthetic of your interior. Installation takes under two minutes with included 3M adhesive—no drilling, no permanent modifications. The holder grips your card firmly enough to prevent movement on corners and acceleration, yet allows effortless retrieval when you need it. What's Included 📦 Key Card Holder Premium acrylic, satin black, ready to install 🔧 3M Adhesive Strips Pre-applied, removes cleanly if needed Product Highlights Precision-engineered to match Model 3 key card dimensions exactly Premium acrylic construction—durable, scratch-resistant, temperature stable Satin black finish blends with OEM interior trim seamlessly Simple adhesive installation under 2 minutes, no tools required Secures card firmly without movement during acceleration or cornering Minimal footprint—only 99mm × 80mm × 3mm, unobtrusive on your dash Positioned near engine start button for natural, instinctive access Preserves original interior aesthetic and resale value perception Lightweight at just 5g—zero impact on vehicle dynamics Designed specifically for Model 3 (all variants, all years) Compatibility Tesla Model 3 Variant Model Years Compatibility Model 3 (Standard Range) 2017–2024 Direct Fit Model 3 (Long Range) 2017–2024 Direct Fit Model 3 (Performance) 2017–2024 Direct Fit Model 3 Highland (2024+) 2024–Present Direct Fit Installation Difficulty: Beginner | Time: Under 2 Minutes Clean the surface. Wipe the dashboard area near your start button with a dry, lint-free cloth. Remove any dust or residue for optimal adhesive bond. Peel the 3M backing. Carefully remove the adhesive strip backing from the rear of the holder. Handle by edges to avoid contaminating the adhesive. Position and press. Align the holder just above or beside your engine start button. Press firmly for 10 seconds to activate the adhesive bond. Insert your key card. Once set, slide your Model 3 key card into the holder. It should sit snugly without forcing. Wait 24 hours. Allow adhesive to cure fully before aggressive driving or movement of the card. Gentle use is fine immediately. Note: This adhesive is removable but will leave minimal residue if you later decide to take it off. Test adhesive compatibility on a hidden interior surface first if your Model 3 has custom vinyl or paint protection. Complete Your Model 3 Interior Simple, elegant, functional. Exactly what your Tesla deserves. Join thousands of Model 3 owners who've solved the key card storage question with this precision holder. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with Tesla, Inc., or any official Tesla distributor. All vehicle names, logos, and trademarks are property of their respective manufacturers and are used for identification only. Product compatibility is based on standard fitment; please verify your vehicle configuration before purchase. Victorious Automotive assumes no liability for improper installation or use.

Victorious Automotive · Range Rover Sport L494 · Tail Lights Smoked LED Rear Tail Light Assembly – Range Rover Sport L494 (2014–2020) Facelift Style A smoked, 2018 facelift-style LED tail light upgrade that transforms the rear presence of your L494 Sport — sold as a direct-fit pair with no modification required. L494 2014–2020 Smoked Finish Full LED Facelift Style ABS + PC Sold as Pair 12V Aftermarket Direct Fit Overview The Range Rover Sport L494 is one of the most visually commanding SUVs on the road — and the rear light signature plays a defining role in that presence. Whether you're running a pre-facelift 2014–2017 Sport or a later model looking to refresh the aesthetic, these smoked LED tail lights deliver an instantly recognisable upgrade without compromising function. Styled to replicate the refined 2018 facelift rear light design, these units combine a blacked-out smoked lens with a full LED light cluster — bringing a darker, more purposeful look to the Sport's rear end. The ABS and polycarbonate construction ensures durability in all conditions, while the 12V LED technology guarantees crisp, bright output for indicators, brake lights, and running lights alike. For pre-facelift L494 owners (2014–2017), this is one of the most impactful visual upgrades available — effectively bringing your Sport's rear styling in line with the 2018+ facelift specification. For 2018–2020 models, these units serve as a direct-fit, smoked-lens alternative to the OE units. Both left and right units are included, with precision-fit housings designed around the original mounting points. What's Included 💡 Left Tail Light Unit Driver side — smoked LED assembly 💡 Right Tail Light Unit Passenger side — smoked LED assembly 🔌 Wiring Connectors OE-matching plug connectors pre-fitted 🔩 Mounting Hardware Fixings compatible with OE apertures Product Highlights 2018 facelift-style LED design for all L494 model years Smoked blacked-out lens for a stealth, aggressive rear aesthetic Full LED cluster — running, brake, and indicator functions Sold as a matched pair — left and right included ABS + polycarbonate construction for long-term durability Precision moulded to OE mounting points — no drilling required 12V compatible — plug-and-play with factory wiring harness CCC externally tested and certified Direct upgrade for pre-facelift 2014–2017 L494 models Aftermarket replacement option for 2018–2020 L494 models Compatibility Vehicle Model Code Year Range Fit Type Notes Range Rover Sport L494 2014–2017 Direct Fit Tuning upgrade to 2018 facelift style Range Rover Sport L494 2018–2020 Direct Fit OE replacement with smoked finish Range Rover Sport L461 2022–2026 Not Compatible Different platform and rear architecture Range Rover Vogue L405 2013–2021 Not Compatible Different vehicle model Range Rover Vogue L460 2022–2026 Not Compatible Different vehicle model Defender L663 2020–2026 Not Compatible Different vehicle model Installation Notes Difficulty: Beginner–Intermediate  |  Estimated Time: 30–60 Minutes  |  Tools Required: Basic Hand Tools Open the tailgate and locate the access panel or trim covering the tail light mounting area on each side. Remove the retaining nuts or bolts securing the original tail light unit — typically 2–3 fixings per side. Carefully pull the OE tail light assembly away from the body, taking care not to stress the wiring loom. Disconnect the OE wiring connector from the back of the original unit — note the orientation before removal. Connect the new smoked LED tail light unit to the factory wiring connector — it should click securely into place. Position the new unit against the body, aligning with the OE mounting points, and secure with the original fixings. Repeat for the opposite side, then test all light functions — running, brake, and indicator — before reassembling trim panels. Important: Always disconnect the vehicle battery before working with electrical components. If your vehicle is under warranty, consult your dealership before making modifications. Some 2014–2017 pre-facelift vehicles may require a resistor or coding adaptation to prevent indicator hyper-flash — test all functions before finalising installation. Upgrade Your L494 Sport's Rear Signature These smoked LED tail lights are one of the most impactful visual modifications available for the Range Rover Sport L494 — bringing facelift aesthetics and a darker, more purposeful stance to any model year. Explore more Sport L494 accessories at Victorious. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. This product is an aftermarket part and is not manufactured by or sourced from JLR.

Victorious · Jaecoo J7 · Exterior Rear Ladder for Jaecoo J7 Premium rear access ladder with rugged off-road styling and heavy-duty construction for expedition-ready builds. Jaecoo J7 Exterior Upgrade Heavy-Duty Steel Weather-Resistant OEM-Style Fit Overview The Jaecoo J7 is a capable compact SUV built for adventure, and this premium Rear Ladder transforms its practicality and visual presence. Engineered for owners who demand both function and authentic expedition styling, this ladder provides secure roof access while delivering the aggressive off-road aesthetic that defines overland-ready vehicles. Manufactured from heavy-duty materials with a weather-resistant finish, this ladder integrates seamlessly with roof racks, roof boxes, and cargo systems. Every detail reflects our commitment to durability—rigid construction withstands daily use and harsh environments, while the OEM-style fitment ensures alignment that looks factory-original. Whether you're loading camping gear, accessing roof storage, or simply elevating your J7's visual impact, this ladder combines adventure-inspired design with genuine utility. It's an essential upgrade for serious explorers and weekend warriors alike. What's Included 🪜 Rear Ladder Assembly Complete fabricated ladder unit ⚙️ Mounting Brackets OEM-style hardware kit 🔩 Installation Hardware Stainless fasteners & clips Product Highlights Designed specifically for Jaecoo J7 Rugged off-road styling and presence Heavy-duty steel construction Weather-resistant finish OEM-style fitment and alignment Easier roof storage access Compatible with roof racks & boxes Durable and lightweight design Adventure-inspired aesthetic Practical for camping and travel Compatibility Variant Compatibility Jaecoo J7 (All Model Years) Direct Fit Other Jaecoo Models Not Compatible Other Vehicle Makes Not Compatible Before purchasing: Confirm your vehicle matches the Jaecoo J7 specification. Some model variants may require minor installation adjustments. Roof accessories shown in product images are sold separately unless explicitly stated. Installation Notes Difficulty Level: Intermediate | Est. Time: 2–3 Hours Locate rear mounting points on your Jaecoo J7 chassis Position ladder assembly and align with mounting brackets Secure brackets using supplied stainless hardware Verify all fasteners are tight and ladder is level Test load capacity and check for any movement Apply weather sealant to mounting points if needed Professional installation recommended: Correct alignment and secure fitment ensure safety and longevity. We recommend having a qualified technician install this upgrade to maintain warranty coverage. Why Victorious We specialise in premium exterior and adventure upgrades for serious explorers. Every product is tested for durability, fitment accuracy, and real-world performance. Our Jaecoo J7 ladder reflects our commitment to quality engineering and authentic expedition styling—not just cosmetics, but genuine utility. Ready to Upgrade Your J7? Transform your Jaecoo J7 into an expedition-ready machine. Add this premium rear ladder to your build and gain secure roof access with aggressive off-road style. Shop Jaecoo J7 Upgrades Use code 22GET20 for 20% off any 2 items ★★★★★ 4.9/5 – 12,300+ Reviews 📦 Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ 30-Day Money-Back – No Questions Asked ☎️ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Jaecoo, Geely, Land Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for Jaecoo J7 vehicles and is sold as an aftermarket accessory only.

Victorious · Toyota Land Cruiser LC300 · Exterior Land Cruiser Lettering for Toyota Land Cruiser 300 LC300 Premium ABS lettering badge to elevate the commanding presence of your LC300's exterior design. LC300 2022–2026 ABS Plastic Exterior Direct Fit Overview The Toyota Land Cruiser 300 Series is an icon of off-road capability and refined adventure. Whether you're tackling remote terrain or commanding attention on city streets, your LC300 deserves exterior details that match its stature. Our Land Cruiser Lettering is engineered to integrate seamlessly with the 300 Series' bold design language, adding a sophisticated finishing touch that speaks to your vehicle's heritage and presence. Crafted from high-grade ABS plastic, this lettering set combines durability with a sleek, factory-aligned aesthetic. Unlike cheaper alternatives, our lettering resists UV degradation, maintains its colour stability, and withstands the demands of daily driving and international conditions. Available in two sizes—Ordinary and Extra Large—you can customise the visual impact to suit your vision. Installation is straightforward with included guidelines and access to our demonstration video. This is a bolt-on enhancement that requires no drilling, modifications, or permanent changes to your vehicle. Perfect for those seeking an authentic, understated upgrade that amplifies the LC300's inherent gravitas. What's Included 🔤 Land Cruiser Letter Set Complete lettering in your chosen size 📋 Installation Guide Detailed step-by-step instructions included 🎥 Demo Video Access Visual reference for confident fitting ✓ Fit Guarantee LC300-specific engineering Product Highlights High-grade ABS plastic—tough, UV-resistant, colour-stable Factory-aligned design language for LC300 300 Series No drilling or permanent modifications required Available in Ordinary and Extra Large sizes Integrated with standard fitment points Clear installation guidelines provided Demonstration video for reference Lightweight construction for zero impact on performance Resists weathering and environmental degradation Elevates exterior aesthetic with premium finish Compatibility Toyota Land Cruiser Model Year Range Fit Status Land Cruiser 300 (LC300) 2022–2026 Direct Fit Land Cruiser 250 (LC250) 2024–2026 Not Compatible Land Cruiser 200 (J200) 2008–2021 Not Compatible Land Cruiser 100 (J100) 1998–2007 Not Compatible Installation Difficulty Level: Easy | Time: 15–20 minutes Clean the target surface thoroughly with soap and water, then dry completely. Identify the correct fitment location on your LC300 exterior using the installation guide. If using adhesive backing, carefully peel and position the lettering, pressing firmly from centre outward to eliminate air bubbles. For fastener-based installation, align holes and secure using the provided hardware or standard fasteners. Allow adhesive to cure for 24 hours before subjecting the vehicle to moisture or high-speed driving. Step back and verify alignment and fitment are as intended. Important: Confirm your size selection (Ordinary or Extra Large) before ordering. Once fitted, return is not available. Refer to our demo video for visual confirmation of fitment location. Why Choose Victorious We specialise in premium exterior and interior upgrades for Land Rover, Range Rover, Defender, and Toyota Land Cruiser models. Our Land Cruiser Lettering is engineered to OEM standards, tested in real-world conditions, and backed by our 30-day money-back guarantee. With 4.9/5 stars across 12,300+ verified reviews, Victorious customers trust us to deliver quality that lasts. All orders ship worldwide via DHL, FedEx, UPS, or TNT. Need advice? Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT). Ready to Enhance Your LC300 Upgrade your Land Cruiser 300 with premium lettering that commands respect. Browse our full LC300 collection and discover more exterior enhancements engineered for legendary capability. Shop LC300 Collection Apply code 22GET20 for 20% off any 2 items at checkout. 4.9/5 stars 12,300+ reviews 30-day guarantee Worldwide shipping Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover, or any official manufacturer. All product names and logos are the property of their respective owners. This product is an aftermarket accessory designed for compatibility with the specified vehicle models.

Victorious Automotive · Land Rover & Jaguar · Key Accessories Soft TPU Key Fob Cover — Land Rover & Jaguar Protection Case A precision-fit, flexible TPU shell that shields your Land Rover or Jaguar key fob from peeling, cracking, drops, and daily wear — available in six colours. Soft TPU 6 Colours Range Rover Sport Range Rover Evoque Freelander 2 Discovery Jaguar XE / XF / XJ Slip-On Fit Key Protection Overview Land Rover and Jaguar key fobs are engineered to a high standard, but they share a well-documented weakness: the plastic outer shell is prone to peeling, splitting, and cracking with regular daily use. It's one of the most common complaints raised by Discovery, Range Rover Sport, and Evoque owners — and once the casing begins to fail, the internals become exposed to moisture, grit, and impact damage. This soft TPU key cover wraps your existing fob in a precisely moulded flexible shell that absorbs drops, resists scuffs, and prevents the original plastic from delaminating. The material is engineered to stay pliable in cold conditions and heat-resistant enough to cope with summer cabin temperatures — all while allowing full button operation through the cover without any loss of tactile response. Beyond protection, it's a simple way to personalise your key. With six colour options — blue, gold, pink, silver, black, and red — you can choose something that suits your interior trim or simply sets your key apart. No tools required, no modifications, and completely reversible. What's Included 🔑 TPU Key Fob Cover × 1 Flexible soft-touch shell for Land Rover / Jaguar key fobs 🎨 Choice of 6 Colours Blue · Gold · Pink · Silver · Black · Red 📄 Fit Guide Compatibility reference included with order Product Highlights Precision-moulded fit for Land Rover and Jaguar key fob profiles Prevents the notorious plastic peeling and splitting issue Soft TPU absorbs shock from drops and impacts Full button access — no interference with lock, unlock or remote start Available in 6 colours to personalise your key Pliable in cold weather, heat-resistant in summer conditions Slip-on fitment — no tools, no adhesives, fully reversible Protects key electronics from moisture and dust ingress High-quality TPU material — no cheap brittle plastics Slim profile — no added bulk in pocket or bag Compatibility Vehicle Model / Code Years Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Evoque L538 2011–2019 Direct Fit Freelander 2 L359 2006–2014 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Land Rover Discovery 5 L462 2017–2022 Direct Fit Jaguar XE X760 2015–2022 Direct Fit Jaguar XF X260 2015–2022 Direct Fit Jaguar XJ / XJL X351 2009–2019 Direct Fit Jaguar F-Type X152 2013–2020 Direct Fit Range Rover Sport L461 (2022+) 2022–2026 Verify Fob Shape Range Rover Vogue L460 (2022+) 2022–2026 Verify Fob Shape Defender L663 2020–2026 Verify Fob Shape If you are unsure whether this cover fits your specific key fob generation, please contact us before ordering — we're happy to confirm compatibility. Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 minutes  ·  Tools Required: None Remove your existing key fob from your keyring or lanyard for a clean working surface. Orient the TPU cover so the button cutouts align with your fob's existing button layout. Starting at one end, stretch the cover slightly and press it over the fob — the material will flex to accommodate the fob body. Work around the edges, pressing the TPU flush against all sides until the cover sits securely with no lifted corners. Test all buttons through the cover to confirm full operation before attaching back to your keyring. Note: The cover is designed for standard-profile Land Rover and Jaguar key fobs. If your fob has been previously repaired or has a non-standard shell fitted, fitment may vary. Do not force the cover over a fob that is visibly larger than the standard profile — contact us to confirm first. Shop by Your Vehicle Looking for more accessories for your specific model? Browse our dedicated collections below: 🚙 Discovery 4 L319 · 2009–2016 🚙 Discovery 5 L462 · 2017–2022 🚙 Range Rover Sport L494 · 2013–2020 🚙 Range Rover Evoque L538 · 2011–2019 🚙 Discovery Sport L550 · 2015–2024 🚙 Range Rover Velar L560 · 2018–2022 Protect What You Drive. Down to the Key. Your Land Rover key fob endures hundreds of pocket drops, bag scrapes, and daily encounters. This cover costs less than a coffee and could save you from a costly key shell replacement. Grab yours today — and save 20% when you pick up any two items. Shop Land Rover Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Jaguar, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fibre Seat Adjustment Frame Side Covers – Land Rover Defender 110 (2020–2021) A precision-fit interior upgrade that shields your Defender's seat adjustment frames from daily wear while delivering a sharp, purposeful carbon fibre aesthetic. Defender L663 2020–2021 ABS Carbon Fibre Seat Frame Covers Peel & Stick No Drilling Interior Trim Direct Fit Overview The Land Rover Defender 110 in its L663 generation brought a genuinely modern interior to a vehicle that had long traded on its raw mechanical character. For owners who have invested in that interior — whether in SE, S, X-Dynamic, or First Edition trim — maintaining the quality of every surface matters. The seat adjustment frame area, subject to constant contact from shoes, bags, and daily use, is one of the first places wear begins to show. These ABS carbon fibre seat adjustment frame side covers are engineered specifically for the 2020 and 2021 model year Defender 110. Each piece is formed from high-grade ABS and finished in a woven carbon fibre texture that reads as genuinely premium in person. They sit flush against the seat frame surround, covering the exposed base sections on both the driver and front passenger sides, protecting the original plastic from scuffs, scrapes, and UV fading without altering the seat's adjustability in any way. Installation requires no tools, no drilling, and no professional fitting — automotive-grade adhesive tape is pre-applied to the reverse of each cover, creating a bond that holds firmly through temperature variation and vibration. It's the kind of detail that Defender owners notice immediately, and that passengers simply assume was there from the factory. What's Included 🪑 Driver Side Cover Carbon fibre ABS, left-hand seat frame 🪑 Passenger Side Cover Carbon fibre ABS, right-hand seat frame 🔧 Pre-Applied Adhesive Automotive-grade tape, no tools required 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for the 2020–2021 Defender 110 seat frame geometry High-grade ABS construction with woven carbon fibre surface finish Protects original seat frame plastic from scuffs, scratches, and wear Pre-applied automotive adhesive tape for a clean, tool-free installation Does not impede seat adjustment levers, rails, or mechanisms Colour-consistent carbon texture that complements factory interior trim Resistant to temperature fluctuation and interior UV exposure Low-profile fit — no visible gaps, no lifting edges once bonded Covers both front seats — driver and passenger included as a pair Reversible installation — removable without damage to original surfaces Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🟢 Difficulty: Beginner Begin with both front seats fully accessible. Push each seat back to expose the lower frame surround and give yourself clear working space. Thoroughly clean the seat frame surface using an isopropyl alcohol wipe or equivalent. Remove all dust, grease, and residue — adhesion quality depends entirely on surface preparation. Allow the cleaned surface to dry completely for at least 2–3 minutes before proceeding. Test-fit each cover dry before removing the adhesive backing. Confirm alignment with the seat frame contours on both sides. Peel the protective film from the adhesive tape on the reverse of the cover. Align carefully and press firmly into position, applying sustained pressure across the full surface for 30–45 seconds. Repeat for the second cover on the opposite seat. Avoid adjusting the seat aggressively for at least one hour to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation in temperatures below 10°C / 50°F as cold conditions significantly reduce initial adhesive bond strength. If fitted in winter, allow additional curing time before use. Complete Your Defender Interior Explore our full range of Defender 110 L663 interior accessories — designed for owners who hold their vehicle to a higher standard. Shop Defender 110 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Steering Wheel Trim Insert — Black / Oak Grain / Carbon Fiber (2020+) A precision-cut ABS steering wheel trim insert that brings a distinct, tailored finish to the Defender 110's cabin — available in three curated styles to complement any interior build. Defender L663 2020–2026 ABS Plastic Model: YW-1652 ISO9001 Certified Pre-Applied Adhesive Black / Oak Grain / Carbon Fiber 75g No-Drill Install Overview The 2020 Land Rover Defender L663 represented a complete reimagining of an icon — a vehicle that blends utilitarian heritage with genuinely modern interior design. The steering wheel sits at the centre of that experience, the point of contact between driver and machine on every journey. It deserves to look the part. This steering wheel trim insert (model YW-1652) is precision-cut from high-grade ABS plastic to slot flush into your Defender 110's steering wheel, filling the factory surround with a clean, refined finish. Choose from gloss Black for a stealthy, understated look, Oak Grain for a warmer, more distinguished character, or Carbon Fiber for a performance-forward aesthetic that pairs particularly well with darker cabin tones. Weighing just 75g and engineered with pre-applied adhesive backing, this is a trim upgrade that requires no tools, no drilling, and no specialist knowledge — just careful alignment and light pressure. ISO9001 manufacturing certification ensures the finish, fitment tolerances, and material quality are held to a consistent standard throughout production. What's Included 🎛️ Steering Wheel Trim Insert × 1 YW-1652 — available in Black, Oak Grain, or Carbon Fiber finish 🔖 Pre-Applied Adhesive Backing Factory-applied for a clean, no-mess install 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut ABS plastic for an exact, flush fitment on the Defender 110 steering wheel Three finish options — Black, Oak Grain, and Carbon Fiber — to suit every interior specification Pre-applied adhesive backing for a clean, tool-free installation ISO9001 certified manufacturing for consistent quality and finish tolerances Lightweight at just 75g — no impact on steering feel or airbag deployment clearance ABS plastic construction provides durability and resistance to everyday wear and heat Seamless OEM-style appearance that looks factory-fitted, not aftermarket Compatible with all trim levels of the 2020+ Defender 110 L663 No drilling, cutting, or permanent modification required Reversible upgrade — can be removed without damaging the original steering wheel Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your Defender 110 on a level surface and ensure the steering wheel is in its natural centre position before beginning. Clean the steering wheel trim surround thoroughly using an isopropyl alcohol wipe to remove any dust, oils, or residue. Allow to dry fully — this step is critical for adhesive bond quality. Dry-fit the trim insert without removing the adhesive backing to confirm alignment and fitment before committing to the final placement. Carefully peel back the protective film from the pre-applied adhesive layer, taking care not to touch the adhesive surface. Align the trim insert precisely with the steering wheel surround, starting from one edge and pressing firmly along the entire surface to ensure full contact and a bubble-free bond. Apply firm, even pressure across the full length of the insert and hold for 30–60 seconds to activate the adhesive. Allow a minimum of 2 hours before driving to allow the adhesive to fully cure before the trim experiences vibration or movement. ⚠ Important: Do not install in temperatures below 10°C (50°F) as this can significantly reduce adhesive bond strength. Avoid cleaning the area with silicone-based products prior to installation. Always verify your exact vehicle model and year against the compatibility table before purchase — steering wheel designs can vary between trim levels and model years. Complete Your Defender Interior This steering wheel trim is just the start. Explore our full range of Defender L663 interior upgrades — from dashboard trim panels to gear surround inserts — all precision-engineered to the same standard. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of identifying product compatibility. Always verify fitment with your specific vehicle model and year before purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Carbon Fiber AC Vent Frame Trim — Front Air Outlet (2020–2026, L663) A precision-formed carbon fiber finish trim that transforms the Defender 110's front AC vent surrounds into a polished, purposeful interior detail — no tools, no fuss, no compromise. Defender L663 2020–2026 Carbon Fiber Finish High-Quality ABS Peel & Stick Front Air Outlet Interior Trim Direct Fit Overview The Defender 110 L663 is Land Rover's most deliberate design statement in a generation — a vehicle that balances rugged capability with a surprisingly considered interior. But even from the factory, certain details invite refinement. The front AC vent frames, while functional, sit flat and understated against the dashboard. For owners who've already invested in the Defender experience, this is an easy upgrade worth making. These AC Vent Frame Trim covers are precision-cut to match the exact profile of the Defender 110's front air outlet surrounds. Available in a carbon fiber finish, they introduce a layer of visual depth and contrast that suits the Defender's architectural interior aesthetic without looking aftermarket. The ABS substrate is rigid enough to maintain shape over time, and the 3M-style adhesive backing bonds cleanly to the factory plastic without leaving residue or requiring any permanent modification. Where this trim excels is in the detail. Carbon fiber patterning is applied with consistent texture across the face of each piece, and the fit — being custom-developed for the L663 platform — eliminates the gaps and misalignments you'd expect from generic trim kits. If you care about how your Defender looks at the level of interior finishing, this is a straightforward and satisfying addition. What's Included 🪟 Front AC Vent Frame Covers 1 complete set — pre-cut for Defender 110 front air outlets 🔲 Carbon Fiber Finish ABS Trim High-quality ABS with carbon fiber surface texture 🏷️ Pre-Applied Adhesive Backing 3M-style peel-and-stick — ready to install out of the box 📋 Fitting Guide Simple step-by-step instructions included Product Highlights Custom-developed specifically for the Defender 110 L663 front AC vent profile Carbon fiber surface finish adds visual depth and premium contrast High-quality ABS construction — rigid, warp-resistant, and long-lasting Pre-applied adhesive backing for a clean, tool-free installation No drilling, cutting, or modification to factory trim required Residue-free removal — protects original OEM plastic underneath Consistent texture and colour across all included pieces Designed to withstand dashboard heat and UV exposure over time Subtle upgrade that enhances the interior without altering the Defender's character Pairs well with other carbon fiber interior trim upgrades for a cohesive finish Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L461 L461 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Start with a clean interior — ensure the front AC vent surrounds are free of dust, grease, and any dashboard protectant products. A 70% isopropyl alcohol wipe works perfectly. Allow the surfaces to dry fully before proceeding. Any moisture beneath the adhesive will reduce long-term bonding strength. Test-fit each trim piece without removing the adhesive backing first. Confirm alignment and positioning against the vent frame edges. Once satisfied with the fit, peel back the adhesive liner and carefully position the trim onto the vent frame — working from one edge to avoid air bubbles. Apply firm, even pressure across the entire surface of each piece for 30–60 seconds to activate the adhesive bond. Avoid operating the AC vents aggressively for the first 24 hours to allow the adhesive to fully cure in position. ⚠ Note: Ensure your specific Defender 110 variant matches the L663 platform (2020 onwards). Pre-2020 Defender models use an entirely different interior architecture and are not compatible with this trim set. If you're unsure, contact us at +44 203 943 9919 before ordering. Upgrade Your Defender's Interior Explore the full range of Defender L663 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Buy any two items and save 20% with the code below. Shop Defender 110 Collection Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Defender 110 · Interior Trim Land Rover Defender 110 Aluminum Dashboard Speaker Cover Sticker – Silver (2015–2019) Premium aluminum speaker trim that elevates your dashboard with refined metallic styling and lasting durability. Defender 110 2015–2019 Aluminum Alloy Dashboard Trim Silver Finish Easy Install Overview The Defender 110 is built for genuine exploration, but its interior deserves refinement that matches its capability. These aluminum dashboard speaker cover stickers transform your cabin with a contemporary metallic accent, upgrading the stock plastic surrounds with genuine automotive-grade materials. Precision-engineered for the 2015–2019 generation, each sticker features an anodized silver aluminum alloy finish that resists fingerprints and maintains its luster through years of use. The circular design sits flush with your dashboard speakers, adding visual depth without adding bulk. Installation takes minutes—no tools required. The industry-leading adhesive backing grips permanently, and removal leaves no residue if you ever need to swap them out. They're a thoughtful first interior upgrade for any Defender 110 owner. What's Included ✦ 2x Speaker Cover Stickers Pair for left and right dashboard speakers ✦ Premium Adhesive Backing Pre-applied, ready to install ✦ Installation Instructions PDF guide included in box ✦ Protective Backing Strips Keep adhesive fresh until ready to mount Product Highlights Premium 6061-T6 aluminum alloy construction Anodized silver finish resists corrosion and UV fading Precisely engineered for 2015–2019 Defender 110 models Circular design matches factory speaker apertures Industrial-strength adhesive backing holds permanently No tools, drilling, or modifications required Clean, reversible installation—no residue on removal Adds visual sophistication to dashboard interior Compatible with all trim levels (SE, HSE, First Edition) Backed by Victorious 30-day money-back guarantee Compatibility Defender 110 Year Engine / Trim Fit Status 2015–2016 All (2.2L, 3.0L) Direct Fit 2017–2018 All trims Direct Fit 2019 All variants Direct Fit 2020+ L663 Defender 110 Not Compatible 2004–2014 Pre-facelift Not Compatible Installation Notes Difficulty: Beginner · Time: 5 minutes Turn off the vehicle and allow dashboard to cool for 10 minutes. Locate both dashboard speaker covers (left and right of steering column). Gently clean the surrounding plastic with a dry microfiber cloth to remove dust. Peel back the protective backing from one sticker slowly, keeping fingers away from the adhesive surface. Align the circular sticker with the speaker aperture and press firmly from center outward, smoothing any air bubbles. Repeat step 4–5 for the second sticker on the opposite side. Allow adhesive to cure for 24 hours before touching or washing the dashboard. Temperature Note: For best results, install when the cabin temperature is between 60–80°F. Cold adhesive may require light pressure for longer to set properly. Upgrade Your Defender 110 Interior Today Small details define great interiors. These aluminum speaker covers are the perfect entry point for personalizing your cabin—refined, understated, and built to last. Shop Now Apply code at checkout: 22GET20 20% off when you buy any 2 items 4.9/5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ Expert support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All product names, logos, and trademarks are property of their respective owners. This product is a third-party accessory designed for compatibility with Defender 110 vehicles. Please verify model and year compatibility before purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Armrest Box with Air Conditioning Vent — Oak Wood Grain, ABS (Back Row) A precision-fitted rear armrest box cover that brings refined Oak Wood Grain detailing to the Defender 110's back row air conditioning panel — no drilling, no modification, just a cleaner cabin. Defender 110 L663 2020–2021 Oak Wood Grain ABS Material Back Row AC Cover Adhesive Fit ISO9001 Certified LLK2783 Overview The Defender 110 L663 arrived with a functional, utilitarian interior that Land Rover deliberately kept honest — but for owners who want to add a layer of warmth and tactile refinement without altering the vehicle's character, small details matter enormously. The rear passenger area, in particular, benefits from thoughtful upgrades that don't shout, but rather complement what's already there. This armrest box and air conditioning vent cover is designed specifically for the 2020–2021 Defender 110's back row seating position. Finished in a rich Oak Wood Grain texture and constructed from durable ABS, it sits directly over the rear AC outlet panel, transforming a purely functional surface into something that feels considered and premium. The Oak Wood Grain finish introduces a natural warmth that works exceptionally well against the Defender's darker interior tones, drawing the eye without being ostentatious. Installation is straightforward — the cover uses automotive-grade adhesive tape to bond securely to the existing panel, requiring no tools, no drilling, and no permanent modification to your vehicle. It's the kind of upgrade that takes under five minutes to fit but elevates the feel of the rear cabin every single time a passenger reaches for the air controls. What's Included 🪵 Rear AC Armrest Cover 1x Oak Wood Grain ABS panel — LLK2783 🔧 Adhesive Tape Pre-Applied Automotive-grade, included for installation Product Highlights Precision-designed for the Defender 110 L663 (2020–2021) rear armrest AC panel Oak Wood Grain finish adds warmth and texture to the back row interior High-quality ABS construction — impact resistant and heat stable ISO9001 certified manufacturing for consistent quality standards Tool-free installation via pre-applied automotive adhesive tape No drilling, cutting, or permanent modification required Lightweight at 300g — does not affect cabin weight distribution Also available in Carbon Fibre and Silver finishes for alternative aesthetics Covers the existing panel entirely for a seamless, factory-integrated look Ideal for owners seeking subtle interior enhancement without heavy modification Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Not Compatible Land Rover Defender 110 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  ·  🔧 Difficulty: Beginner Identify the rear armrest AC vent panel on the back row of your Defender 110 (2020–2021). Ensure the vehicle interior is at room temperature before beginning. Thoroughly clean the surface of the existing AC panel using an isopropyl alcohol wipe or dry microfibre cloth. Remove any dust, oils, or residue that could compromise adhesion. Allow the cleaned surface to dry completely for at least 60 seconds before proceeding. Peel the protective backing from the pre-applied automotive adhesive tape on the reverse of the cover panel. Carefully align the Oak Wood Grain cover with the existing AC vent panel, ensuring all edges and vent openings are correctly positioned before making contact. Press firmly and evenly across the entire surface for 30–60 seconds to activate the adhesive bond. Apply consistent pressure to all corners and edges. Allow a full 24 hours before using the rear AC system at high fan speeds to ensure the adhesive has cured fully. ⚠ Important: Do not install on a damp, dusty, or recently cleaned surface that hasn't dried. Avoid installation in temperatures below 10°C, as adhesive performance may be reduced. Once bonded, removal may leave residue on the original panel. Complete Your Defender's Interior This cover pairs beautifully with our wider range of Defender 110 interior trim accessories. Explore the full collection and build a cabin that reflects how seriously you take your vehicle. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and manufacturer references are used solely for fitment identification purposes. This product is an aftermarket accessory and is not a genuine Land Rover OEM part.

Victorious Automotive · Defender L663 · Exterior Lighting LED Fog Light with Daytime Running Lights Upgrade — Land Rover Defender 110 L663 (2020–2024) A precision-engineered direct-fit LED fog light replacement for the Defender L663, combining bright yellow all-weather illumination with a striking daylight DRL surround for a factory-plus finish. Defender L663 2020–2024 Direct Fit LED Technology Daytime Running Lights Yellow Fog Beam 90 · 110 · 130 Exterior Upgrade Plug & Play Overview The Land Rover Defender L663 is one of the most capable and design-conscious vehicles on the road today. From urban commutes to serious off-road terrain, every element of the Defender's exterior has been engineered with purpose — and its lighting system is no exception. Owners who demand more from their Defender deserve lighting that matches that philosophy: functional, refined, and visually commanding in every condition. This LED Fog Light and Daytime Running Light upgrade is purpose-built for the Defender 90, 110, and 130 (2020–2024). The unit replaces the factory fog light assembly with a dual-function LED housing — a bright yellow fog beam for penetrating mist, rain, and low-visibility conditions, surrounded by a cool white daylight LED ring that activates as a DRL during normal driving. The result is a front end that looks sharper, more premium, and more intentional at any time of day. Engineered as a direct replacement for L663 factory fog light housings, fitment is precise and clean. There are no modifications required to the bumper or wiring loom, and the finished installation is indistinguishable from factory — except noticeably better. Whether you're upgrading a daily driver or a weekend expedition vehicle, this is one of the most impactful exterior refinements available for the current Defender generation. What's Included 💡 LED Fog Light Pair Left & right units, matched set with yellow fog beam and DRL surround 📋 Installation Guide Step-by-step fitting instructions for L663 Defender models 🔌 Plug & Play Connectors Pre-wired connectors compatible with OEM harness — no splicing required 🔩 Mounting Hardware All fixings required for a secure, rattle-free installation included Product Highlights Direct OEM replacement for Defender L663 fog light housings — no modifications needed Dual-function LED unit: bright yellow fog beam plus white daylight DRL surround Yellow fog light beam optimised for rain, mist, and low-visibility driving conditions Cool white LED DRL halo surround active during normal daylight operation Compatible with Defender 90, 110, and 130 body variants (2020–2024) Plug-and-play wiring — connects directly to the factory harness without cutting or splicing Precision-moulded housing for a flush, factory-quality bumper fit Significantly improved light output versus standard factory halogen fog units Enhances the Defender's front-end presence day and night Long-lasting LED technology — low heat output, high efficiency, extended service life Compatibility Model Code Year Range Body Style Fitment Land Rover Defender 90 L663 2020–2024 3-Door SUV Direct Fit Land Rover Defender 110 L663 2020–2024 5-Door SUV Direct Fit Land Rover Defender 130 L663 2020–2024 8-Seat Extended Direct Fit Land Rover Defender (Pre-2020) L316 Pre-2020 All Not Compatible Range Rover Sport L461 L461 2022–2026 All Not Compatible Range Rover Vogue L460 L460 2022–2026 All Not Compatible Installation Notes 🔧 Difficulty: Moderate  ·  ⏱ Estimated Time: 45–75 Minutes  ·  🛠 Tools Required: Trim removal tool, T20 Torx driver, flathead screwdriver Ensure the vehicle is parked on a flat surface with the ignition off and keys removed. Allow any existing lights to cool completely before handling. Using a trim removal tool, carefully prise the existing fog light surround away from the front bumper. Work gradually around the perimeter to avoid cracking the surrounding fascia. Locate and remove the T20 Torx screws securing the factory fog light unit to the bumper bracket. Retain these fixings for reinstallation or use the supplied hardware. Disconnect the factory wiring connector from the back of the existing fog light unit by pressing the tab and pulling firmly. Do not pull on the wiring loom itself. Connect the plug-and-play harness from the new LED unit to the factory connector — it should click firmly into place with no force required. Align the new LED fog light housing into the bumper aperture and secure using the Torx screws. Check alignment against the bumper line before fully tightening. Briefly reconnect the battery and test both fog light and DRL functions before refitting the trim surround. Confirm both left and right units activate correctly. Refit the fog light surround trim and press firmly until all clips engage. Repeat the full process for the opposite side. ⚠ Note: Professional installation is recommended if you are not comfortable working with automotive electrical systems or plastic trim components. Incorrect fitment may affect the performance of the lighting unit or the integrity of the bumper fascia. Always verify your Defender's specific build variant before ordering. Complete Your Defender Build Browse the full range of exterior upgrades curated specifically for the Defender L663 at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Shop Defender L663 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Pillar B Handle Grab Frame Cover Trim — ABS Matte & Carbon Fiber Finish (2020–2021) A precision-formed B-pillar grab handle frame trim that elevates the Defender 110's interior with a refined finish — available in ABS matte or carbon fiber, and fitted in minutes with no tools required. Defender L663 2020–2021 ABS Matte Carbon Fiber Interior Trim B-Pillar Cover 3M Adhesive ISO9001 Certified No-Drill Fit 2 Piece Set Overview The Land Rover Defender 110 L663 represents a genuine return to form — a vehicle that balances heritage ruggedness with a surprisingly considered interior. For owners who've invested in a 2020 or 2021 Defender, the details matter. The B-pillar area, home to the grab handles used every time a passenger enters or exits, is one of the most handled surfaces in the cabin — and one of the first to show its age if left in bare factory trim. This Pillar B Handle Grab Frame Cover Trim is engineered specifically for the Defender 110 (2020–2021) to dress that area with purpose. Manufactured from high-grade ABS with an ISO9001-certified production process, the trim is available in two finishes: a clean, understated matte black or a textured carbon fiber weave for those who prefer a more performance-oriented aesthetic. Both options are precisely moulded to mirror the contours of the factory grab frame — no gaps, no flex, no compromise. Installation is entirely tool-free. Each piece comes pre-backed with 3M automotive-grade adhesive tape, so the trim bonds directly and securely to the existing surface without drilling, clipping, or modification. The result is a clean, integrated look that appears factory-fitted from the moment it's applied — a small detail that makes a meaningful difference to the overall quality feel of the cabin. What's Included 🪟 B-Pillar Frame Cover Trims 2 pieces per set — one for each side of the cabin 🔲 Pre-Applied 3M Adhesive Tape Factory-applied to each trim piece — ready to fit straight from the box 📋 Fitting Guidance Application notes included to ensure correct alignment and bond strength Product Highlights Designed exclusively for the Defender 110 L663 (2020–2021) — not a generic fitment Available in ABS matte black or carbon fiber texture for personalised style Pre-applied 3M automotive adhesive tape for a clean, tool-free installation ISO9001 certified manufacturing ensures consistent quality and dimensional accuracy Precision moulded ABS construction — resistant to warping, heat, and UV fading Covers the grab handle frame area on both driver and passenger sides Seamlessly integrates with the factory interior without modification Enhances cabin appearance in a high-contact, high-visibility interior zone Lightweight trim adds style with zero impact on vehicle function or safety Simple adhesive removal process if repositioning is needed during fitting Compatibility Model Code Years Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022+ Not Compatible Land Rover Defender 110 L663 2022–2026 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Before beginning, confirm the trim profile matches your vehicle's B-pillar grab frame area by comparing against the product images provided. Thoroughly clean the grab frame surface using an isopropyl alcohol wipe or equivalent degreaser. Remove any dust, oils, or residue. Allow the surface to dry completely before proceeding. Warm the pre-applied 3M adhesive tape on each trim piece using a hairdryer on a low heat setting for 20–30 seconds. This activates the adhesive and significantly improves initial bond strength. Peel back the adhesive liner from the first trim piece. Carefully position the trim over the grab frame, starting from one end and pressing progressively along the length to avoid air bubbles or misalignment. Apply firm, even pressure across the entire surface of the trim for 30–60 seconds to ensure full contact between the adhesive and the substrate. Repeat the process for the second trim piece on the opposite side. Allow a minimum of 24 hours for the adhesive to fully cure before subjecting the area to heavy use. ⚠ Important: Always compare the product images carefully against your specific vehicle configuration before purchasing. Interior trim layouts can vary between specification levels. If you have any questions about fitment, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Upgrade Your Defender's Interior Today Shop the full range of Defender L663 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide, with a 4.9/5 star rating and a 30-day money-back guarantee on every order. Shop Defender 110 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Defender L663 · Exterior Trim Land Rover Defender 110 Rear Bumper Plate Cover Trim Stickers — ABS Black, L663 2020+ A precision-formed ABS rear bumper plate cover that reinforces the Defender 110's bold exterior stance with a factory-matched black finish and a hassle-free adhesive installation. Defender 110 L663 2020–2026 ABS Black Rear Bumper Exterior Trim Adhesive Fit ISO9001 Certified Model LLK2841 Overview The Land Rover Defender 110 L663 is a vehicle built to make a statement — utilitarian, purposeful, and unmistakably bold. Every surface detail contributes to its commanding road presence, and the rear bumper area is no exception. Whether you're running a daily commute or heading off-road, the rear end of your Defender deserves the same attention to detail as the rest of the build. This Rear Bumper Plate Cover Trim is designed specifically for the 2020-onwards Defender 110 L663, engineered to sit flush against the bumper's lower plate section with no drilling or cutting required. Formed from high-grade ABS plastic and finished in a deep satin black, it integrates seamlessly with the Defender's existing exterior aesthetic — whether your vehicle is in Santorini Black, Carpathian Grey, or any other factory colour. The fitment uses purpose-selected automotive-grade adhesive tape, the same technology used in OEM trim applications across the industry. The result is a clean, rattle-free attachment that holds firmly through temperature extremes, road wash, and the kind of conditions a Defender genuinely encounters. It's a subtle upgrade that looks like it was always there. What's Included 🛡️ Rear Bumper Plate Cover Trim 1x ABS Black trim panel, model LLK2841 🔧 Adhesive Mounting Tape Pre-cut automotive-grade tape included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed for the 2020+ Defender 110 L663 bumper profile High-grade ABS construction — impact-resistant and lightweight Deep satin black finish complements all factory Defender colours ISO9001 certified manufacturing for consistent quality control No drilling, no cutting — clean adhesive-only installation Automotive-grade tape included; pre-cut for exact panel fitment Resistant to UV fading, water ingress, and road debris Rattle-free bond once cured — flush sit against bumper surface Dimensions: 79cm L × 20cm W × 10cm H | Weight: 300g Direct replacement aesthetic — looks factory-fitted from day one Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Defender 110 (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🛠 Tools Required: None Park the Defender 110 on a level surface and allow the bumper to cool to ambient temperature before starting — avoid installation in direct sunlight or below 10°C for best adhesive performance. Thoroughly clean the rear bumper plate surface using an isopropyl alcohol wipe or panel wipe solution, removing all road film, wax, and grease. Allow to dry completely before proceeding. Dry-fit the ABS trim cover against the bumper surface to confirm alignment and panel seating before committing the adhesive. The trim should sit flush with no raised edges. Peel the protective backing from the pre-cut adhesive tape strips. Position the trim carefully, starting from the centre and working outward to avoid air pockets. Apply firm, even hand pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Pay particular attention to corners and edges. Allow the adhesive to cure for a minimum of 24 hours before subjecting the vehicle to rain, washing, or high-speed motorway driving. ⚠ Note: Do not attempt to reposition the trim once the adhesive tape has made full contact with the bumper surface. Adhesive effectiveness is significantly reduced if the trim is removed and re-applied. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Complete Your Defender's Exterior This bumper trim is just the beginning. Explore the full range of Defender 110 L663 exterior accessories at Victorious Automotive — curated specifically for owners who hold their vehicles to the same standard we do. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Land Rover Defender · Storage Land Rover Defender 110/130 Black Oxford Cloth Trunk Storage Box Heavy-duty cargo organization for your Defender — weatherproof Oxford fabric keeps tools and gear secure on every expedition. Defender 110 Defender 130 2004–2019 Oxford Cloth Black Tool Storage Overview The Defender 110 and 130 are purpose-built machines designed for serious work. Whether you're tackling a season of expedition driving, site work, or simply maximizing your cargo capacity, your loadout matters. This trunk storage box transforms wasted space into organized, protected compartments for tools, spares, recovery kit, and everything in between. Engineered from premium Oxford cloth with reinforced stitching and a rigid frame, this box delivers genuine durability without added weight. The sleek black finish integrates seamlessly with your Defender's interior, and secure fastening ensures nothing shifts under load—whether you're navigating rutted tracks or motorway miles. This is the kind of upgrade that makes sense the moment you use it. Once installed, you'll wonder how you ever worked without it. Weatherproof, spacious, and built to last through years of genuine use. What's Included 📦 Storage Box Premium Oxford cloth, black finish 🔧 Fastening Kit Secure installation hardware included 📖 Instructions Clear setup guide for your Defender Product Highlights Premium Oxford cloth fabric with weatherproof finish Reinforced stitching and seams for durability Engineered for Defender 110 and 130 (2004–2019) Rigid internal frame maintains shape under load Secure fastening system prevents shifting Multiple compartments for organized storage Low-profile design—no obstruction of rearward visibility Easy installation without modification to vehicle Perfect for tools, spares, expedition kit, and gear Factory-finish black integrates with Defender interior Compatibility Model Year Range Fit Defender 110 2004–2019 Direct Fit Defender 130 2004–2019 Direct Fit Defender 110 (L663 / 2020+) 2020–2026 Not Compatible Defender 130 (L663 / 2020+) 2020–2026 Not Compatible Installation Notes Difficulty: Easy · Time: 15–20 minutes Measure and position the storage box in your cargo area—ensure clear of wheel arches and rearward load. Attach the fastening points using the supplied hardware and appropriate anchor points on your Defender's floor or load bars. Ensure the box is level and secure—rock it gently to confirm no movement. Load cargo gradually and verify stability under full load before regular use. Note: Do not exceed vehicle GVWR or limit load to 50 kg unless engineering confirmed for your specific Defender variant. Always secure loose items inside the box. Ready to Organize Your Defender? This storage box is the practical upgrade serious Defender owners choose. Built for expedition work, site jobs, and everything in between. Order now and keep your gear where it belongs. Shop Defender Storage Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide shipping · DHL, FedEx, UPS ✓ 30-day guarantee · Full refund if not satisfied 📞 +44 203 943 9919 · Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All vehicle names and trademarks remain the property of their respective manufacturers. Product compatibility information is provided as a guide; please confirm your specific vehicle variant before purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 & 130 Aluminum Alloy Silver Door Speaker Cover Panel Trim — Set of 8 A precision-machined set of eight aluminum alloy speaker cover trims that replace the factory plastic finish with a refined, industrial-grade silver aesthetic — purpose-built for the 2020-onwards Defender L663. Defender L663 2020–2026 Set of 8 Aluminum Alloy Silver Door Speaker Trim Peel & Stick ISO9001 Certified Model: XYL0341 Overview The Land Rover Defender L663 was engineered to be capable without compromise — and its interior deserves the same standard. Whether you're driving a 110 or the longer-wheelbase 130, the cabin is a space you spend serious time in, and every surface matters. The door speaker surrounds are a subtle but consistently visible detail, and the factory plastic finish — functional as it is — leaves room for meaningful improvement. These aluminum alloy speaker cover panel trims are machined to match the precise dimensions and mounting geometry of the Defender L663's door speaker housings. Finished in a clean, brushed silver tone, they complement the Defender's utilitarian-meets-refined design language without trying to over-style it. The result is a cohesive upgrade that looks factory-correct but noticeably more premium. The complete set of eight covers every speaker position across the front and rear doors of the 110 and 130, meaning the cabin reads as consistently upgraded throughout — not a piecemeal modification. Installation requires no tools and no permanent modification to your vehicle: each trim bonds cleanly using a professional-grade peel-and-stick adhesive system, making this one of the most impactful interior changes you can make in under an hour. What's Included 🔊 8× Speaker Cover Trims Full set — front and rear door positions covered 🔩 Pre-Applied Adhesive 3M-grade peel-and-stick backing on each trim 📋 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Precision-formed aluminum alloy construction for lasting rigidity and a quality-forward feel Brushed silver finish complements the Defender's interior design language naturally Complete set of 8 trims covers every door speaker position in the 110 and 130 Peel-and-stick installation — no drilling, no screws, no permanent modifications ISO9001 certified manufacturing ensures consistent dimensional accuracy across every piece Engineered specifically for the 2020-onwards Defender L663 body and door profile Lightweight at 300g total, with no impact on door close feel or weight distribution Resistant to everyday cabin wear — UV stable and easy to wipe clean Each trim measures 14cm × 14cm × 3cm for a precise, flush fit against factory panels Immediately reversible — no trace left on the original panels if removed Compatibility Vehicle Model Code Year Range Compatibility Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Start with a clean, dry cabin — allow the vehicle to reach ambient room temperature if possible. Cold interiors (below 10°C) can reduce initial adhesive bond strength. Using a microfibre cloth lightly dampened with isopropyl alcohol, clean each factory speaker panel surface to remove any dust, oils, or residue. Allow to dry fully for 2–3 minutes. Dry-fit each trim piece against its corresponding speaker panel before committing. Confirm alignment and confirm the trim sits flush with no gaps at the edges. Peel the protective backing from the adhesive layer on the first trim. Position carefully over the speaker panel — the adhesive bonds on first contact, so take your time aligning before pressing. Apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Work outward from the centre to avoid air pockets. Repeat for all remaining trims, working systematically across front doors before moving to rear doors. Allow 24 hours before exposing the trims to moisture or direct sunlight, giving the adhesive time to fully cure for a permanent hold. ⚠ Important: Confirm fitment for the Defender 90 before purchasing — speaker panel geometry may differ from the 110 and 130 variants. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for your specific build date and specification. Upgrade Your Defender's Interior Today Explore our full range of Defender L663 interior accessories — designed by enthusiasts, built to the standard your Land Rover deserves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle before purchasing.

Victorious · Defender 90/110 · Interior Trim Aluminum Alloy Silver Central Water Cup Holder Decorative Frame – Defender 2004–2018 Premium aluminum trim ring elevates your cabin with refined, purpose-built design for Defender interiors. Defender 90 / 110 2004–2018 Aluminum Alloy Interior Trim Cup Holder Ring Adhesive Install Overview The classic Land Rover Defender 90 and 110 have always been workhorses—but that doesn't mean your interior has to feel utilitarian. This aluminum alloy central water cup holder decorative frame brings a touch of refinement to your cabin, transforming a functional element into a styled accent piece that complements modern and original interiors alike. Machined from lightweight, corrosion-resistant aluminum and finished in brushed silver, this trim ring sits around your existing cup holder, providing visual separation and a premium tactile feel. It's the kind of detail that Defender owners notice—a small investment that lifts the entire driving experience. Installation is straightforward thanks to heavy-duty adhesive backing, and the finish is engineered to resist fading, scratching, and wear. Three-piece design ensures perfect fitment across all compatible 2004–2018 models. What's Included 🎯 3-Piece Frame Set Complete trim ring assembly ready to install 🔧 Adhesive Backing Pre-applied, no additional fasteners needed ✓ Installation Guide Quick reference included in packaging Product Highlights Precision-machined aluminum alloy construction for durability and a premium feel Brushed silver finish resists fingerprints, scratches, and UV fading Lightweight design adds minimal mass to your interior Seamless integration with Defender 90 and 110 cabins (2004–2018) Strong double-sided adhesive—no drilling, no permanent modification Three-piece design ensures perfect alignment and fitment Corrosion-resistant for long-term reliability Complements both stock and upgraded interiors Quick 10-minute installation without specialist tools 30-day money-back guarantee—zero risk Compatibility Model Year Range Fitment Defender 90 2004–2018 Direct Fit Defender 110 2004–2018 Direct Fit Defender 130 2004–2018 Not Compatible Defender (2020+) 2020–Present Not Compatible Installation Difficulty: Beginner | Time: ~10 Minutes Preparation: Start with a clean, dry cup holder rim. Wipe with a lint-free cloth and allow to air dry completely (5 minutes). Surface Cleaning: Use a mild alcohol-based cleaner to remove any residue or oils. This ensures maximum adhesive grip. Position Frame: Carefully align the three-piece frame around the cup holder opening. Check alignment from multiple angles before committing. Peel and Stick: Starting with one section, peel the backing and press firmly onto the rim. Hold for 10 seconds. Repeat for remaining pieces. Final Press: Apply firm, even pressure across the entire frame for 30 seconds to activate the adhesive bond. Cure Time: Allow 24 hours before use or cleaning. Adhesive reaches full strength within this period. Pro Tip: If you need to reposition during installation, carefully peel back one section, adjust, and re-press. Do not attempt full removal within the first hour—allow 24 hours before removal to avoid damage. Own Your Defender's Interior Small details separate a properly finished Defender from one that's been overlooked. This aluminum frame is a statement—proof that you care about every surface your hands touch every day. Shop Defender Interior Trim Save 20% when you buy any 2 items with code 22GET20 4.9/5 stars 12,300+ reviews 30-day money back 🌍 Worldwide shipping 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Land Rover, Range Rover, or Jaguar Land Rover Ltd. All vehicle names, logos, and marks are the property of their respective owners. Product compatibility is based on published specifications; please verify fitment with your vehicle's documentation before purchase.