Best selling products

Victorious Automotive · Range Rover Sport L494 · Interior Trim Right-Hand Drive Carbon Fiber Interior Trim Set — Range Rover Sport L494 (2014–2020) Precision-cut real carbon fiber trim engineered exclusively for right-hand drive Range Rover Sport L494 models, delivering a factory-quality upgrade that transforms the cabin aesthetic with zero compromise. Range Rover Sport L494 RHD Specific 100% Real Carbon Fiber 2014–2020 Interior Trim Direct Fit No Drilling Required Adhesive Installation Overview The Range Rover Sport L494 is one of the most driver-focused vehicles Land Rover has ever produced — a vehicle that rewards those who take the details seriously. From the sculpted dash to the carefully considered console architecture, the Sport's interior is a space that responds exceptionally well to thoughtful enhancement. This carbon fiber trim set was developed with that philosophy in mind. Crafted from genuine woven carbon fiber — not vinyl wrap, not hydrographics — this trim delivers the authentic layered depth and structural rigidity that only real carbon fiber can offer. Each panel is precision-engineered to mirror the exact profile of the factory trim surface on right-hand drive models, ensuring seamless integration without any modification to your vehicle. Whether you're looking to complement an existing black pack specification or introduce a performance-inspired contrast to lighter interior tones, this set provides an immediate and unmistakable visual upgrade. The end result is a cabin that feels purposefully configured rather than accessorised — and that distinction matters to every Range Rover Sport owner who knows what they're looking at. What's Included 🪄 Carbon Fiber Passenger Trim Panel RHD-specific profile, pre-cut to factory dimensions 📦 Retail Packaging Brand new, unopened — protected for safe delivery 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style mounting tape included 📋 Installation Guide Step-by-step fitting reference included Product Highlights Constructed from 100% authentic woven carbon fiber — not vinyl or film Engineered specifically for right-hand drive L494 models — not a universal fit Lightweight construction adds zero meaningful weight to the interior UV-resistant clear coat finish prevents yellowing or fading over time Pre-applied automotive adhesive tape for a clean, tool-free installation Precision die-cut edges align flush with factory panel contours Compatible with all trim levels including SE, HSE, HST, SVR, and Autobiography Deep gloss finish enhances the layered weave pattern under any lighting Supplied brand new in protective retail packaging Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Code Year Range Drive Fitment Range Rover Sport L494 2014–2020 Right-Hand Drive (RHD) Direct Fit Range Rover Sport L494 2014–2020 Left-Hand Drive (LHD) Not Compatible Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 15–30 Minutes  |  Tools Required: None Thoroughly clean the factory trim surface using an isopropyl alcohol wipe to remove all dust, oils, and residue. Allow to dry completely before proceeding. Dry-fit the carbon fiber panel against the factory surface to confirm alignment and panel orientation before removing the adhesive backing. Peel back a small section of the adhesive tape backing and carefully position one edge of the trim panel against the factory surface. Gradually press the panel into place from one end to the other, applying firm and even pressure along the full surface to activate the adhesive bond. Run your thumb or a soft cloth firmly across the entire panel for 30–60 seconds to ensure full contact adhesion, paying particular attention to edges and corners. Allow the adhesive to cure at room temperature for a minimum of 24 hours before exposing the trim to moisture or temperature extremes. ⚠ Important: This trim is designed exclusively for right-hand drive Range Rover Sport L494 models (2014–2020). Installing on a left-hand drive vehicle will result in an incorrect fit. If your vehicle falls outside this specification, please contact our team before ordering. Upgrade Your Range Rover Sport Interior Browse our full Range Rover Sport L494 collection for matching carbon fiber panels, dashboard trim sets, and interior accessories — all engineered to the same standard. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of parts compatibility identification. This product is an aftermarket accessory and does not constitute an OEM or genuine Land Rover part.

Victorious Automotive · Defender L663 · Interior Trim Right-Hand Drive ABS Plastic Window Lift Switch Buttons Frame Cover for Land Rover Defender 110 (2020+) A precision-cut ABS trim cover that upgrades the window switch panel on your Defender 110, available in four finishes to complement any interior style. Defender L663 2020–2026 Right-Hand Drive ABS Plastic ISO9001 Certified 4 Colour Options Adhesive Fit Interior Trim No Drilling Model LLK2782 Overview The 2020 Land Rover Defender L663 redefined the nameplate — sharper lines, a more driver-focused cabin, and a degree of modernity that the original series never attempted. But even on a vehicle at this price point, the stock interior trim leaves room for personalisation. The window switch panel is one of the most frequently touched surfaces in the cabin, and it's one of the first areas where owners look to introduce a finish that better reflects their taste. This Window Lift Switch Buttons Frame Cover is engineered specifically for right-hand drive Defender 110 models from 2020 onwards. Manufactured from high-grade ABS plastic certified to ISO9001 standards, it wraps cleanly around the existing switch housing without modification to the vehicle's wiring or switchgear. The cover installs using pre-applied automotive adhesive tape, forming a solid bond to the factory trim beneath. Available in four distinct finishes — Gloss Black, Oak Wood Grain, Silver, and Carbon Fiber — this cover allows you to tailor the interior character of your Defender from understated to boldly accented. Whether you're building a clean all-black cockpit or layering in warm wood tones for a more expedition-touring feel, this is a low-effort, high-impact upgrade that makes an immediate difference to the way the cabin presents itself. What's Included 🪟 Window Switch Frame Cover × 1 ABS plastic, pre-cut for RHD Defender 110 (2020+) 🔲 Adhesive Tape Pre-Applied Automotive-grade 3M-style backing tape included on reverse 📋 Installation Guide Step-by-step fitting instructions included in packaging Product Highlights Precision-cut ABS plastic for a seamless OEM-style fit over the factory switch housing Right-hand drive specific — designed exclusively for RHD Defender 110 2020 models Available in four finishes: Gloss Black, Oak Wood Grain, Silver, and Carbon Fiber ISO9001 certified manufacturing — consistent quality and dimensional accuracy guaranteed Adhesive tape installation — no drilling, no cutting, no damage to the vehicle Lightweight at 200g — no added bulk or interference with switch operation Compact profile: 30cm × 15cm × 10cm — sits flush with surrounding trim surfaces Durable ABS construction resists UV fading, daily wear, and temperature fluctuation Reversible upgrade — can be removed and replaced without permanent alteration An immediate visual upgrade to one of the cabin's most frequently interacted surfaces Compatibility Vehicle Code Year Range Drive Side Fitment Land Rover Defender 110 L663 2020–2026 Right-Hand Drive Direct Fit Land Rover Defender 90 L663 2020–2026 Right-Hand Drive Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Right-Hand Drive Verify Before Purchase Land Rover Defender 110 L663 2020–2026 Left-Hand Drive Not Compatible Land Rover Defender (Pre-2020) Classic Pre-2020 All Not Compatible Range Rover Sport L494 / L461 All All Not Compatible Range Rover Vogue L405 / L460 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Park the vehicle on a level surface and ensure the interior is at a stable temperature — avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Thoroughly clean the existing window switch panel surround using an isopropyl alcohol wipe or a clean microfibre cloth. Allow to dry completely before proceeding. Dry-fit the frame cover over the switch housing to confirm alignment and positioning before committing. Check that all switch cutouts align precisely with the factory buttons. Peel the protective film from the pre-applied adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface. Align the cover carefully with the switch housing, then press firmly and evenly across the entire surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours for the adhesive to fully cure before applying pressure to the switch area or wiping the surface down. ⚠ Important: This cover is designed for right-hand drive Defender 110 (2020+) only. Verify your vehicle's drive configuration and model year before installation. Incorrect fitting on an incompatible vehicle may result in misalignment or interference with switch operation. If in doubt, contact our team on +44 203 943 9919 before purchase. Complete Your Defender Interior Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for interior upgrades that actually fit, finish properly, and last. Browse the full Defender L663 collection for matching trim pieces and cabin accessories. Shop Defender 110 (2020+) Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Steering Wheel Trim Insert — Black / Oak Grain / Carbon Fiber (2020+) A precision-cut ABS steering wheel trim insert that brings a distinct, tailored finish to the Defender 110's cabin — available in three curated styles to complement any interior build. Defender L663 2020–2026 ABS Plastic Model: YW-1652 ISO9001 Certified Pre-Applied Adhesive Black / Oak Grain / Carbon Fiber 75g No-Drill Install Overview The 2020 Land Rover Defender L663 represented a complete reimagining of an icon — a vehicle that blends utilitarian heritage with genuinely modern interior design. The steering wheel sits at the centre of that experience, the point of contact between driver and machine on every journey. It deserves to look the part. This steering wheel trim insert (model YW-1652) is precision-cut from high-grade ABS plastic to slot flush into your Defender 110's steering wheel, filling the factory surround with a clean, refined finish. Choose from gloss Black for a stealthy, understated look, Oak Grain for a warmer, more distinguished character, or Carbon Fiber for a performance-forward aesthetic that pairs particularly well with darker cabin tones. Weighing just 75g and engineered with pre-applied adhesive backing, this is a trim upgrade that requires no tools, no drilling, and no specialist knowledge — just careful alignment and light pressure. ISO9001 manufacturing certification ensures the finish, fitment tolerances, and material quality are held to a consistent standard throughout production. What's Included 🎛️ Steering Wheel Trim Insert × 1 YW-1652 — available in Black, Oak Grain, or Carbon Fiber finish 🔖 Pre-Applied Adhesive Backing Factory-applied for a clean, no-mess install 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut ABS plastic for an exact, flush fitment on the Defender 110 steering wheel Three finish options — Black, Oak Grain, and Carbon Fiber — to suit every interior specification Pre-applied adhesive backing for a clean, tool-free installation ISO9001 certified manufacturing for consistent quality and finish tolerances Lightweight at just 75g — no impact on steering feel or airbag deployment clearance ABS plastic construction provides durability and resistance to everyday wear and heat Seamless OEM-style appearance that looks factory-fitted, not aftermarket Compatible with all trim levels of the 2020+ Defender 110 L663 No drilling, cutting, or permanent modification required Reversible upgrade — can be removed without damaging the original steering wheel Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your Defender 110 on a level surface and ensure the steering wheel is in its natural centre position before beginning. Clean the steering wheel trim surround thoroughly using an isopropyl alcohol wipe to remove any dust, oils, or residue. Allow to dry fully — this step is critical for adhesive bond quality. Dry-fit the trim insert without removing the adhesive backing to confirm alignment and fitment before committing to the final placement. Carefully peel back the protective film from the pre-applied adhesive layer, taking care not to touch the adhesive surface. Align the trim insert precisely with the steering wheel surround, starting from one edge and pressing firmly along the entire surface to ensure full contact and a bubble-free bond. Apply firm, even pressure across the full length of the insert and hold for 30–60 seconds to activate the adhesive. Allow a minimum of 2 hours before driving to allow the adhesive to fully cure before the trim experiences vibration or movement. ⚠ Important: Do not install in temperatures below 10°C (50°F) as this can significantly reduce adhesive bond strength. Avoid cleaning the area with silicone-based products prior to installation. Always verify your exact vehicle model and year against the compatibility table before purchase — steering wheel designs can vary between trim levels and model years. Complete Your Defender Interior This steering wheel trim is just the start. Explore our full range of Defender L663 interior upgrades — from dashboard trim panels to gear surround inserts — all precision-engineered to the same standard. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of identifying product compatibility. Always verify fitment with your specific vehicle model and year before purchase.

Victorious Automotive · Defender L663 · Underbody Protection Front Undershield Guard for Land Rover Defender L663 (2020–2026) — 5mm Anodised Aluminium Heavy-duty aluminium undershield protection for the Defender's lower bumper and radiator — engineered for serious off-road use without compromising recovery access. Defender L663 2020–2026 5mm Anodised Aluminium 90 & 110 Off-Road Protection Radiator Guard Recovery Loop Access Direct Fit Overview The Land Rover Defender L663 was purpose-built to handle terrain that most vehicles wouldn't dare attempt — but even with its go-anywhere credentials, the underside of the front bumper and radiator area remain exposed to rocks, trail debris, and grounding impacts the moment serious off-road work begins. It's a vulnerability that any genuine off-road driver will encounter quickly, and one that demands a proper solution rather than an afterthought. This Front Undershield Guard is precision-designed to fit the Defender 90 and Defender 110 (L663, 2020 onwards), constructed from 5mm anodised aluminium — a material that offers an exceptional strength-to-weight ratio, high corrosion resistance, and the rigidity needed to deflect rock strikes and debris without adding unnecessary bulk. The anodised finish ensures long-term durability even when exposed to mud, water, and the elements repeatedly. What sets this guard apart from generic alternatives is the reinforced mounting assembly, which distributes impact loads properly across the vehicle's structure rather than concentrating stress at a single point. Crucially, access to the front recovery loop is maintained at all times — so if you do get grounded, extraction remains straightforward without the need to remove any components in the field. This is the kind of thoughtful engineering that Defender owners expect from their accessories. What's Included 🛡️ Front Undershield Guard 5mm anodised aluminium, pre-formed for direct fitment 🔩 Installation Hardware Kit All mounting bolts, brackets and fixings included 📄 Fitment Guide Step-by-step installation reference included Product Highlights 5mm anodised aluminium construction for maximum strength and corrosion resistance Designed specifically for Defender 90 and 110 L663 (2020 onwards) — direct OEM-style fit Protects the lower front bumper area and radiator from rock strikes and trail debris Reinforced mounting assembly distributes impact loads across the vehicle structure Recovery loop remains fully accessible — no field removal required during recovery Anodised finish resists mud, moisture, and prolonged off-road exposure Lightweight profile adds meaningful protection without significant weight penalty All installation hardware included — no additional parts needed for fitment Maintains factory undertray fitment lines for a clean, integrated appearance Suited for green laning, trail driving, expedition use and demanding off-road environments Compatibility Vehicle Model Code Year Range Body Style Fitment Land Rover Defender 90 L663 2020–2026 3-Door Direct Fit Land Rover Defender 110 L663 2020–2026 5-Door Direct Fit Land Rover Defender 130 L663 2022–2026 Extended Verify Before Purchase Land Rover Defender (Classic) L316 Pre-2016 All Not Compatible Range Rover Sport L494 / L461 All Years All Not Compatible Range Rover Vogue L405 / L460 All Years All Not Compatible Installation Notes 🔧 Difficulty: Beginner–Intermediate  |  ⏱ Estimated Time: 45–90 Minutes  |  👤 1–2 People Recommended Ensure the vehicle is parked on level ground, engine off and cooled. Engage the parking brake and use axle stands if working beneath the front end. Remove any existing undertray panels or fasteners in the lower front bumper area as required to gain clear access to the mounting points. Offer up the undershield guard to the mounting positions and confirm alignment with the vehicle's existing apertures before tightening any fixings. Attach the reinforced mounting assembly using the supplied hardware, starting with the outer mounting points to seat the guard correctly before securing centre fixings. Torque all bolts to the manufacturer's recommended specification — do not overtighten aluminium mounting points. Confirm that the front recovery loop is visible and unobstructed, and that the guard sits flush with no contact against cooling components or wiring. Conduct a short low-speed test drive and re-check all fixings for security before undertaking off-road use. ⚠ Important: Verify fitment compatibility with your specific Defender model and build year before installation. If your vehicle is fitted with optional front underbody styling packs or aftermarket bumpers, fitment may vary. When in doubt, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before proceeding. Built for Defenders That Actually Get Used At Victorious Automotive, every accessory we carry is selected with one question in mind: would we fit it to our own vehicle? This undershield guard answers that with confidence. Explore our full range of Defender L663 protection and exterior accessories below. Shop All Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are used solely for fitment reference purposes.

Victorious · Range Rover · Key Covers Range Rover Fashion Key Cover 2014+ Premium TPU key cover engineered to protect and personalize your Range Rover fob with fade-resistant color options. 2014–Present L405 / L460 TPU Material 4 Colors Scratch Resistant Overview Range Rover owners expect their accessories to match the sophistication of their vehicle. This fashion key cover is engineered from premium thermoplastic polyurethane (TPU)—the same material found in professional phone screen protectors—to deliver protection without bulk. It fits all 2014+ Range Rover models (L405 through current L460) and sits naturally on your OEM key fob without altering its pocket feel. The cover shields your key from daily wear, scratches, and accidental drops while keeping your personal style at the forefront. Available in red, blue, pink, and silver, each finish is formulated to resist fading even under extended UV exposure—crucial for a piece you'll handle every day. Why it matters: Your key fob is part of your vehicle's identity. A quality cover protects your investment, maintains resale value, and adds a small but meaningful personalization touch that reflects your ownership pride. What's Included 🔑 TPU Key Cover Thermoplastic polyurethane shell 🎨 4 Color Options Red, Blue, Pink, Silver ✓ Guaranteed Fit 2014+ Range Rover models Product Highlights Premium TPU material engineered for durability and grip Fade-resistant color finish maintains appearance long-term Slim profile preserves original key fob shape and pocket fit Protects against scratches, scuffs, and minor impact damage Compatible with Range Rover 2014–2026 (L405, L460) Easy slip-on installation—no tools required Four vibrant color choices for personal expression Low-profile design doesn't interfere with button operation UV-stabilized material resists sun damage and weathering Affordable protection paired with premium aesthetics Compatibility Model Years Code Fit Status Range Rover Vogue 2014–2020 L405 Direct Fit Range Rover Vogue 2022–2026 L460 Direct Fit Range Rover Sport 2014–2022 L494 Direct Fit Range Rover Evoque 2014–2020 L538 Direct Fit Range Rover Evoque 2020–2026 L551 Direct Fit Range Rover Velar 2018–2022 L560 Direct Fit Land Rover Discovery 5 2017–2024 LC Direct Fit Land Rover Defender 2020–2026 L663 Direct Fit Installation Difficulty: Beginner | Time: 2 minutes Remove your Range Rover key fob from your pocket or bag. Align the TPU cover opening with the base of your key fob. Gently slide the cover over the fob body until it sits flush and secure. Press the cover edges down to ensure full contact and a snug fit. Test button operation to confirm the cover doesn't interfere with locks or panic functions. Note: Do not force the cover over the fob. If resistance is felt, ensure you're aligning the opening correctly. The fit should be snug but not strained. Ready to Protect Your Key in Style? A quality key cover is a small investment that delivers daily satisfaction. Shop our full Range Rover accessory collection and enjoy 30 days to love it—or your money back. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessories specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Range Rover, or any official Land Rover entity. All vehicle names and codes are used for compatibility reference only. Product fit and performance are guaranteed by Victorious Automotive alone.

Victorious Automotive · Land Rover / Range Rover · Interior Trim Chrome Volume & Air Conditioning Knob Covers – Land Rover Discovery 4 LR4 · Range Rover Sport L320 · Freelander 2 A set of five precision-fit chrome trim rings that restore a premium, tactile feel to your climate and audio controls — permanently eliminating the notorious sticky rubber degradation found on these generation Land Rovers. L320 Range Rover Sport Discovery 4 / LR4 Freelander 2 2005–2013 Chrome / Silver 5-Piece Set No-Drill Fit Interior Trim Climate Controls Volume Knob Why These Knobs Matter Owners of the Range Rover Sport L320, Discovery 4, and Freelander 2 will be well familiar with one of the most irritating age-related issues these vehicles develop: the soft-touch rubber coating applied to the climate control and audio volume knobs begins to degrade, leaving behind a persistently tacky, unpleasant surface that attracts grime and simply cannot be cleaned away. It is not a fault of neglect — it is a characteristic of the OEM rubber compound used across this era of Land Rover interiors, and virtually every example of sufficient age will eventually suffer from it. These chrome knob covers are engineered specifically to address exactly that problem. Designed to slip directly over the existing knobs on your centre console, they introduce a hard-wearing, chrome-finished surface that feels solid and premium underhand — a significant step up from the original tactile coating even before it degraded. The five-piece set covers all key rotary controls across the climate and audio panel, giving the cabin a cohesive, refreshed appearance. Rather than sourcing individual OEM replacement knobs at significant cost, or living with the stickiness indefinitely, this set offers a clean, cost-effective, and visually superior resolution. Once fitted, the transformation is immediate — both in feel and in the overall impression the interior makes. For owners who take pride in the condition of their vehicles, these covers represent one of the most satisfying and practical interior upgrades available for these models. What's Included 🎚️ Volume Control Cover Chrome ring for main audio volume rotary knob ❄️ Air Con Knob Covers × 4 Chrome trim rings for climate control rotaries 📦 Full 5-Piece Set Everything needed to refresh all rotary controls 🔧 No Additional Hardware Clip-over fit — no tools or adhesives required Product Highlights Directly resolves the sticky rubber degradation on OEM knobs Chrome silver finish — cohesive with brushed trim on these models Set of 5 covers all climate and audio rotary controls No drilling, cutting, or permanent modification required Hard-wearing surface — far more durable than original rubber Precision moulded for exact fitment on L320, LR4, and FL2 Instantly elevates the look and feel of the centre console Easy to clean — does not accumulate residue like OEM coating Reversible installation — original knobs remain intact beneath Fraction of the cost of OEM replacement knob assemblies Compatibility Vehicle Code Years Fit Range Rover Sport L320 2005–2013 Direct Fit Land Rover Discovery 4 / LR4 L319 2009–2016 Direct Fit Land Rover Freelander 2 L359 2006–2014 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible If your vehicle is not listed above or you are unsure of your specific build, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and turn off the ignition. Allow the interior to cool to room temperature if the vehicle has been in direct sunlight — this makes the existing knobs easier to work with. If the OEM knobs are visibly sticky, wipe them down lightly with an isopropyl alcohol cloth and allow to dry fully. This ensures the chrome cover seats cleanly against the base knob. Align each chrome cover over its corresponding rotary knob. The covers are designed to push on with light, even pressure — do not force. You should feel a positive seat as the cover locates correctly. Work through all five knobs methodically, confirming each cover is level and centred before moving to the next. Test each control to confirm full rotation and normal function is maintained. No function should be impeded by the covers. Note: Do not use excessive force when seating the covers. If a cover feels misaligned, remove and re-seat rather than pressing harder. Ensure the base knobs are clean and dry before fitting — any residue may prevent a flush seating. Restore Your Interior. Right Now. The sticky knob problem is one of the most common complaints from owners of this generation of Land Rovers — and one of the easiest to solve. These chrome covers ship worldwide via DHL, FedEx, UPS, and TNT, and are backed by our 30-day money-back guarantee. Shop Range Rover Sport L320 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious · Range Rover · Entertainment Mirrorcast Air Play Screen Mirroring for Range Rover Rear Entertainment Screens Stream mobile, laptop, and tablet content wirelessly to your rear entertainment display via simple RCA connection. Range Rover Compatible Wireless Mirroring AirPlay & Miracast RCA Input Plug & Play Overview Range Rover rear entertainment systems are traditionally limited to DVD and USB playback—a constraint that feels dated in today's connected vehicle world. The Mirrorcast Air Play adapter changes that by unlocking wireless screen mirroring directly to your factory rear display, delivering a seamless bridge between your personal devices and your vehicle's infotainment ecosystem. This compact dongle connects via the existing RCA input on your Range Rover's rear screen assembly and supports both AirPlay (iOS/Mac) and Miracast (Android/Windows) protocols. Whether you're streaming video content, presentations, or just maximizing passenger entertainment during long journeys, the Mirrorcast transforms your rear screen into a true entertainment hub without replacing factory hardware. Installation is straightforward—no splicing, no permanent modifications—and compatibility spans multiple Range Rover generations. Note: You may require additional RCA male cables depending on your model year. What's Included 📡 Mirrorcast Dongle Wireless receiver unit with power adapter 🔌 RCA Output Cable Pre-fitted connection harness ⚡ Power Adapter 5V/2A USB power supply 📖 Installation Guide Step-by-step setup instructions Key Features Dual Wireless Protocol: AirPlay (iOS/tvOS/macOS) and Miracast (Android/Windows) No Factory Modification: Uses existing RCA input—completely reversible Real-Time HD Mirroring: Low-latency video streaming with minimal lag Full-Screen Display: Optimized for landscape presentation and rear-seat viewing Multi-Device Support: Switch between phone, tablet, and laptop instantly Compact Form Factor: Discreet design fits neatly behind rear screen housing Audio Pass-Through: Integrated audio output via RCA stereo channels 2.4GHz & 5GHz Wi-Fi: Dual-band support for stable, interference-free connection Extended Range: Works throughout vehicle cabin—no hot spots or drop zones Universal Compatibility: Functions with any device supporting AirPlay or Miracast Compatibility Range Rover Model Generation Years Status Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Range Rover Velar L560 2018–2022 Direct Fit Range Rover Evoque L551 2019–2024 Adapter Cable Required Range Rover Evoque L538 2015–2019 Adapter Cable Required Land Rover Discovery 5 L462 2017–2024 Adapter Cable Required Note: Additional RCA male-to-male or proprietary adapter cables may be required depending on your model year and rear screen configuration. Verify your specific connector type before purchase. Installation Difficulty: Beginner | Time: 15–20 minutes Power off your Range Rover infotainment system and disconnect the battery negative terminal. Locate the rear entertainment screen assembly behind the front seat headrest or integrated into the rear console. Identify the RCA input ports on your display unit (typically red/white audio + yellow video). Connect the Mirrorcast RCA output cable to the appropriate rear screen inputs. Route the USB power cable to an available 5V outlet (rear seat power, cigarette lighter adapter, or hardwired 12V converter). Insert the Mirrorcast dongle into the power adapter and confirm the LED indicator lights up. Reconnect the vehicle battery and restart infotainment systems. On your mobile device, enable AirPlay (iOS) or Miracast (Android) and select the Mirrorcast device from the available network list. Confirm video and audio output appear on the rear display. Test with multiple devices to verify wireless handoff and stream quality. Important: Do not force RCA connectors or attempt to splice existing factory cables. If your model requires an adapter, source the correct connector type for your year and variant. Improper installation can damage your factory display unit and void warranty coverage. Unlock Wireless Entertainment in Your Range Rover Transform your rear display from a limited DVD/USB interface into a full wireless media hub. Stream anything, from anywhere in your vehicle—no cables, no mess, no factory modifications. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items 4.9/5 stars · 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Phone support +44 203 943 9919 Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any other official manufacturer. All product names, trademarks, and brand references are the property of their respective owners. This product is designed to be compatible with specified vehicles but does not replace or modify factory systems beyond connection to existing media ports.

Victorious · Defender 90/110 · Exterior Front Bumper with LED Lights for Land Rover Defender 90 & 110 Stainless steel front bumper with integrated LED lights, engineered for classic Defender 90 and 110 models with two distinctive styling options. Defender 90 Defender 110 1990–2016 Stainless Steel LED Integrated Front Bumper Overview The Land Rover Defender 90 and 110 define off-road heritage. They demand accessories that respect that legacy while modernising capability. This front bumper delivers both: traditional Defender proportions with contemporary LED integration, offering genuine protection without compromise. Crafted from premium stainless steel, this bumper resists corrosion across seasons and terrain. The integrated LED lighting package enhances visibility during low-light off-road work whilst maintaining authentic Defender aesthetics. Two styling configurations allow you to tailor the look to your build. Direct fit to both Defender 90 and 110 chassis. No modifications required. The modular design accounts for winch integration, allowing you to layer this bumper into a comprehensive protection system. What's Included 🛡️ Front Bumper Assembly Premium stainless steel, one-piece construction 💡 Integrated LED Lights Dual-side configuration with wiring harness 🔧 Mounting Hardware Stainless fasteners and brackets included 📋 Installation Guide Step-by-step photo instructions for both models Product Highlights Stainless steel construction resists salt, mud, and weather damage Integrated LED lights improve visibility without additional wiring complexity Two styling options adapt to modern or classic build aesthetics Direct fit: no cutting, drilling, or frame modification required Compatible with winch mounts and auxiliary lighting systems Lightweight design minimises impact on suspension geometry Pre-wired LED harness connects to existing vehicle electrical system Winch-ready design allows progressive protection layer integration Covers both Defender 90 and Defender 110 without variants Finished with protective coating to prevent oxidation over time Compatibility Model Generation Years Fit Defender 90 Classic (FA) 1990–2016 Direct Fit Defender 110 Classic (FA) 1990–2016 Direct Fit Defender 110 Station Wagon Classic (FA) 1990–2016 Direct Fit Defender 130 Classic (FA) 1990–2016 Not Compatible Defender L663 Modern 2020+ Not Compatible Installation Installation Overview Difficulty: Intermediate Estimated Time: 2–3 hours with a second person Tools Required: Socket set (metric), torque wrench, wire strippers, electrical test light, jack and axle stands Steps Raise and support the vehicle securely on level ground using axle stands. Disconnect the negative battery terminal to isolate the electrical system. Remove the original bumper by unbolting the attachment points at the chassis frame (typically 6–8 bolts). Carefully disconnect any existing light wiring by marking connections with tape for reference. Position the new stainless steel bumper assembly, aligning the mounting brackets with the frame attachment points. Install all mounting bolts hand-tight first, then torque to 35–45 Nm in a cross pattern. Route the pre-wired LED harness through the existing wiring loom behind the bumper. Connect the harness to your vehicle's lighting circuit (positive, negative, and ground as shown in the included diagram). Test LED functionality by turning on headlights and driving lights; use a test light to confirm continuity at each connection. Reinstall the battery terminal, lower the vehicle, and perform a final visual and functional inspection. Important: Ensure the vehicle is fully supported on axle stands before working underneath. Do not rely on a jack alone. If unfamiliar with electrical connections, consult a qualified technician to avoid short circuits or battery drain. Ready to Upgrade Your Defender? This front bumper combines heritage styling with modern protection. Order now and transform your Defender 90 or 110 into a more capable, visually distinctive machine. Shop Now Use code 22GET20 for 20% off when you buy any 2 Victorious items. ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars — 12,300+ verified reviews ✓ Worldwide Shipping — DHL, FedEx, UPS, TNT Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent specialist and is not affiliated with Land Rover, Jaguar Land Rover, or Range Rover. All vehicle names, logos, and references are property of their respective manufacturers. This product is designed for aftermarket fitment and is not an official Land Rover product. Fitment and compatibility depend on individual vehicle configuration; installation by a qualified technician is recommended.

Victorious · Defender · Lighting LED Headlights for Land Rover Defender Professional-grade LED headlight upgrade delivering 50,000+ hour lifespan and superior brightness with military-spec durability. Defender 90/110 1983–2016 Diecast Aluminium 6000K Daylight IP67 Waterproof 50,000hr Life Overview Your Land Rover Defender has earned its place as one of the most capable off-road vehicles ever built—but its original lighting systems weren't designed for modern trails or night driving. These professional LED headlights deliver the brightness and reliability your Defender deserves, whether you're navigating UK country roads or tackling serious terrain across continents. Built from aerospace-grade diecast aluminium 6063 with polycarbonate lenses, these units are engineered to withstand extreme conditions. Operating from 10–30V DC ensures compatibility across all Defender generations, while the optimised heatsink design keeps performance consistent mile after mile. At 6000K colour temperature, you get cool, crisp daylight-like illumination that reduces eye strain and improves visibility in all conditions. With an exceptional 50,000+ hour lifespan, vastly superior energy efficiency, and full IP67 waterproof certification, these LEDs represent a genuine upgrade—not just a cosmetic change. This is lighting engineered for expeditions, not showrooms. What's Included 💡 LED Headlight Unit 6000K daylight, 50,000hr rated ⚙️ Internal Heatsink Optimised cooling system 📋 Installation Guide Step-by-step instructions 🔌 Electrical Connector 10–30V DC compatible Note: Mounting brackets are ordered separately—choose your vehicle variant at checkout to ensure compatibility. Product Highlights 50,000+ hour lifespan—genuine long-term reliability Diecast aluminium 6063 construction—aerospace-grade durability 6000K colour temperature—natural daylight illumination IP67 waterproof & dustproof—sealed against expedition conditions 10–30V DC operating voltage—universal Defender compatibility Polycarbonate lenses—impact-resistant and optically superior Optimised heatsink design—consistent performance over time Low consumption, high efficiency—reduces electrical load Anti-explosion rated—safe for all-weather use 100% brand new—never refurbished or compromised stock Compatibility Defender Variant Year Range Fit Status Defender 90/110 Series 1983–1991 Direct Fit Defender 90/110 (200 Tdi) 1992–2001 Direct Fit Defender 90/110 (300 Tdi) 2002–2006 Direct Fit Defender 90/110 (Td5) 2007–2014 Direct Fit Defender 90/110 (TDCi) 2015–2016 Direct Fit Defender 90 Heritage 1997–2015 Direct Fit All Defender 90 and 110 variants use the same headlight aperture. Confirm your model year and engine type when ordering brackets—they're sold separately to give you flexibility in sourcing. Installation Notes ⚙️ Installation Overview Difficulty: Moderate | Time: 1–2 hours per side Disconnect the vehicle battery before beginning work. Remove the original headlight unit by unbolting the mounting bracket (typically 3–4 bolts). Unplug the electrical connector from the OEM unit. Slide the new LED unit into the headlight aperture, ensuring the lens sits flush. Bolt the mounting bracket securely—do not overtighten. Connect the electrical harness; ensure pins are fully seated. Reconnect the vehicle battery. Test both headlights on low and high beam before closing the bonnet. ⚠️ Important: These LED units run cooler than halogen originals but produce significantly more brightness. Ensure your electrical system is in good condition before installation. If your Defender has aged wiring, consider a pre-check by a qualified auto-electrician. Ready to Upgrade Your Defender's Lighting? Professional LED headlights aren't a luxury—they're essential kit for anyone serious about their vehicle. Brighter, safer, more reliable, and built to last 50,000+ hours. That's Victorious thinking. Add to Cart Use code 22GET20 for 20% off when you order 2 or more items. ⭐ 4.9/5 · 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover entity. All product names and vehicle references are used for identification purposes only. Land Rover, Defender, and Range Rover are registered trademarks of Jaguar Land Rover Limited. We are not endorsed by, sponsored by, or affiliated with Jaguar Land Rover.

Victorious · Range Rover Evoque · Infotainment Wireless Apple CarPlay & Android Auto for Range Rover Evoque 2013–2017 Upgrade your Evoque's factory infotainment with seamless wireless smartphone integration, navigation, and hands-free control. L538 · Evoque 2013–2017 Apple CarPlay Android Auto Wireless + USB GPS Navigation Overview The Range Rover Evoque L538 deserves infotainment that matches its refined design and capable nature. This factory-integrated wireless CarPlay and Android Auto system replaces the limitations of your standard entertainment unit with a modern, smartphone-centric interface—all while retaining your original screen and steering wheel controls. Connection is effortless: pair via Bluetooth and Wi-Fi for true wireless functionality, or use USB for wired connectivity and simultaneous charging. Your iPhone's Siri voice control activates with "Hey Siri," allowing complete hands-free operation of calls, messages, navigation, and music. Android users enjoy the same seamless integration with Google Assistant. The system mirrors your phone's navigation apps—Apple Maps, Google Maps, Waze—with live traffic data. Stream music from Spotify, Apple Music, Amazon Music, and others through your factory speakers. Optional aftermarket camera integration (360° views with dynamic guidelines) transforms parking and reversing. A powerful, adjustable EQ lets you tailor audio to your preference. Home/Back button instantly returns to the original Range Rover interface if needed. What's Included 📱 Wireless CarPlay Module Bluetooth & Wi-Fi enabled 🔌 USB Connection Cable Wired mode + charging support 📍 GPS Navigation Ready Maps, Waze, live traffic 🎚 Equaliser Control Pop, Rock, Soft, Standard presets 📖 Installation Manual Step-by-step printed guide 🎥 Camera-Ready Interface Front, rear, 360° compatible Product Highlights Wireless pairing via Bluetooth & Wi-Fi; USB fallback mode included Apple CarPlay & Android Auto fully integrated into factory screen Hands-free voice control with Siri & Google Assistant Live GPS navigation: Apple Maps, Google Maps, Waze all supported Stream Spotify, Apple Music, Amazon Music through factory speakers Optional aftermarket camera integration (360° & dynamic lines) Powerful adjustable EQ with multiple audio presets Full steering wheel & control knob compatibility—original buttons work Phone charging via USB port; USB media playback also available One-button return to factory interface (Home/Back button) Compatibility Model Year Range Status Range Rover Evoque L538 2013–2017 Direct Fit Range Rover Evoque L551 (2018+) 2018–Present Not Compatible Other Range Rover models Various Not Compatible Pre-Purchase Check: Verify that your Evoque's AUX input is activated or that the armrest box has an AMI interface. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if unsure. Installation Difficulty Level: Intermediate | Time: 1–2 hours Disconnect the negative battery terminal for safety. Remove the dashboard trim panels around the factory infotainment unit using trim removal tools (included with many aftermarket kits, or available separately). Carefully disconnect the factory unit's power, ground, and antenna connectors. Install the new CarPlay module in the designated location (typically behind or integrated with the factory screen mount). Connect the power harness to the vehicle's ACC and Ground circuits; connect antenna to the module. Route the USB connection cable to your preferred mounting location (cup holder, armrest, or centre console). Reinstall dashboard trim panels, ensuring all clips and screws are secure. Reconnect the battery terminal and power on the vehicle. Pair your smartphone via Bluetooth in the system menu, then test wireless and USB connectivity. Calibrate EQ settings and verify steering wheel controls respond correctly. Note: Installation may void your factory warranty. We recommend professional fitment by a qualified Land Rover technician if you are unfamiliar with vehicle electrical systems. A printed step-by-step manual is included; refer to it and contact support if you encounter any issues. Ready to Elevate Your Evoque's Infotainment? Transform your Range Rover Evoque L538 with wireless CarPlay and Android Auto. Enjoy seamless navigation, hands-free calls, and premium audio control—all while keeping your eyes on the road and your hands on the wheel. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee 📞 Expert support – +44 203 943 9919 Disclaimer: Victorious Automotive is an independent specialist retailer and is not affiliated with Land Rover, Jaguar Land Rover plc, or any of their subsidiaries. Land Rover, Range Rover, Evoque, and related marks are registered trademarks of Jaguar Land Rover Limited. This product is designed for compatibility with the specified models and is sold as an aftermarket accessory. Installation may affect your vehicle's manufacturer warranty. Always consult your vehicle's handbook and a qualified technician before installation.

Victorious Automotive · Range Rover Velar · Interior Styling Pillar Vent Matte Silver Covers for Range Rover Velar 2017–2020 A precision-fitted, tool-free upgrade that transforms the Velar's cabin vent surrounds from understated to genuinely refined — in under two minutes. Range Rover Velar 2017–2020 High-Grade ABS Matte Silver Direct Fit Adhesive Install 2-Piece Set Interior Trim Overview The Range Rover Velar sits at a fascinating intersection — a vehicle designed to be genuinely beautiful, with a cabin that rivals the best of European luxury. Land Rover invested heavily in the Velar's interior architecture, with flush surfaces, minimal controls, and a sense of deliberate restraint. Yet for all its considered design, the standard pillar vent surrounds remain a notably plain detail — an area where the factory finish simply doesn't match the ambition of the rest of the cabin. These Matte Silver Pillar Vent Covers are designed to address exactly that. Produced from high-quality ABS with a consistent matte silver finish, each piece is precision-moulded to sit flush against the Velar's existing vent architecture. The result is a subtle but immediately visible improvement — a finish that reads as more premium, more intentional, and far more cohesive with the Velar's wider interior language. What makes this upgrade genuinely compelling is the combination of visual payoff and minimal commitment. There's no drilling, no cutting, no risk to your interior trim. Pre-applied 3M-grade adhesive tape means the covers bond firmly to the original surface with steady hand pressure — permanently transforming the look of your cabin without any permanent modification. What's Included 🔲 Matte Silver Vent Covers 2-piece set, pre-fitted with adhesive backing 🩹 Pre-Applied Adhesive Tape 3M-grade, factory-applied to each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights High-grade ABS construction for lasting durability Consistent matte silver finish, uniform across both pieces Precision-moulded for exact fitment on Velar pillar vents Pre-applied adhesive — no tools or hardware required Installation time under 2 minutes from unboxing 2-piece set covering both pillar vent positions No drilling, cutting, or irreversible modification Compatible with all trim levels of the 2017–2020 Velar Colour-consistent with popular Velar interior silver accents Elevates the factory interior without altering OEM components Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S Direct Fit Range Rover Velar 2017–2020 SE Direct Fit Range Rover Velar 2017–2020 HSE Direct Fit Range Rover Velar 2017–2020 R-Dynamic S / SE / HSE Direct Fit Range Rover Velar 2017–2020 First Edition Direct Fit Range Rover Velar 2021 onwards All Not Confirmed Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 / L551 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 2 Minutes  ·  Tools Required: None Before fitting, clean the existing vent surround surface thoroughly with an isopropyl alcohol wipe to remove any dust, grease, or residue. Allow to dry completely. Remove the protective film from the pre-applied adhesive tape on the reverse of each vent cover. Align the first cover carefully over the pillar vent — take a moment to confirm positioning before making contact with the surface. Once aligned, press firmly and evenly across the entire cover for 20–30 seconds to ensure a strong initial bond. Repeat for the second piece on the opposing vent position. Allow 24 hours for the adhesive to fully cure before exposing to direct sunlight or extreme temperatures. Note: Ensure the application surface is completely clean and dry before fitting. Attempting to install over dust, wax, or moisture will significantly reduce adhesive performance. Do not attempt to reposition covers once the adhesive has made contact with the surface. Complete Your Velar's Interior Browse our full Range Rover Velar collection for more precision-fit interior and exterior upgrades, hand-picked by our specialist team for owners who hold their vehicles to a higher standard. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Victorious Automotive · Range Rover Velar / Evoque · Interior Trim Aluminum Alloy Air Conditioning & Volume Knob Ring Trim — Range Rover Velar & Evoque 2017–2020 Precision-machined aluminum alloy trim rings that upgrade your climate and volume controls with a tactile, premium finish worthy of the cabin they inhabit. Range Rover Velar 2017–2019 Range Rover Evoque 2019–2020 Aluminum Alloy 3-Piece Set No-Tool Fit Blue · Red · Silver Interior Trim AC & Volume Controls Overview The Range Rover Velar and second-generation Evoque are among the most design-forward vehicles Land Rover has ever produced. Every surface in the cabin is considered — and the rotary controls for climate and audio are no exception. As daily-use touch points, they deserve the same level of finish as the rest of the interior architecture. These aluminum alloy knob ring trim pieces are precision-formed to sit flush over the existing air conditioning and volume control dials, adding a machined, anodised layer of quality that the factory finish simply doesn't deliver. Available in three colourways — Blue, Red, and Silver — they allow you to personalise the feel of your cockpit without modifying anything permanently. Designed specifically around the factory knob profiles of the Velar (2017–2019) and Evoque (2019–2020), each ring fits cleanly and securely with no adhesive required. The result is an immediate visual and tactile upgrade that takes under a minute to achieve — and is entirely reversible. What's Included 🔘 AC Knob Ring × 2 Fits left and right climate control dials 🎚️ Volume Knob Ring × 1 Fits central audio/volume rotary control 📦 Full 3-Piece Set All three rings included per order Product Highlights Precision-machined aluminum alloy construction Available in Blue, Red, and Silver anodised finishes Designed to fit factory knob profiles exactly No tools, adhesive, or modification required Direct press-fit installation in under 60 seconds Covers all three main rotary controls (3-piece set) Fully reversible — remove without damage any time Adds premium tactile and visual quality to the cockpit Lightweight construction — adds no perceptible weight Purpose-built for Velar 2017–2019 and Evoque 2019–2020 Compatibility Vehicle Year Range Fit Notes Range Rover Velar 2017 · 2018 · 2019 Direct Fit All trim levels Range Rover Evoque (L551) 2019 · 2020 Direct Fit 2nd Gen Evoque (L551) Range Rover Evoque (L538) 2011–2018 Not Compatible Different knob profile — 1st Gen Range Rover Velar (2020+) 2020–present Verify Before Purchase Minor interior updates may affect fit Range Rover Sport L494 2013–2020 Not Compatible Different rotary control design Defender L663 2020–present Not Compatible Different climate control layout Installation Notes ⏱ Estimated Time: Under 5 minutes  |  🔧 Difficulty: Very Easy — No Tools Required Ensure the vehicle is off and the interior is clean and dry around the control area. Select your preferred colourway (Blue, Red, or Silver) before beginning. Align the first aluminum ring over the corresponding factory knob — match the centre bore carefully. Apply gentle, even downward pressure until the ring seats flush against the dial surround. Repeat for the remaining two rings — volume control and second AC dial. Check each ring is fully seated and turns freely with the knob beneath it. No adhesive is required or recommended. ⚠ Please Note: These rings are designed as press-fit overlays. Do not force or apply excessive pressure. If resistance is felt, check alignment before proceeding. Verify your exact model year before ordering — interior specifications can vary between production runs within the same year. Elevate Every Touch Point The controls you reach for most deserve the same standard as the rest of your Range Rover's interior. Upgrade your Velar or Evoque with confidence — backed by our 30-day money-back guarantee and 4.9-star rated service. Shop Range Rover Velar Accessories Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Velar · Wireless Charging Wireless Car Charger Panel for Range Rover Velar 2017–2019 A factory-style Qi wireless charging panel engineered specifically for the Range Rover Velar, delivering up to 10W fast charging with zero cables and a completely clean finish. Range Rover Velar 2017–2019 Qi Wireless QC 3.0 10W Fast Charge Direct Fit Hidden Wiring Anti-Slip Rubber 3-Coil Design Overview The Range Rover Velar was designed from the outset as a vehicle where form and function exist in complete harmony. Its minimalist interior — stripped of unnecessary clutter and defined by clean horizontal lines — deserves accessories that respect that philosophy. This wireless charging panel was developed with exactly that in mind: a direct-fit replacement tray that slots precisely into the Velar's centre console, as if it were always there. Built to the QC 3.0 standard and equipped with a three-coil Qi layout, this charger eliminates the frustration of charging blind spots. Whether you set your phone down squarely or slightly off-centre, charging initiates immediately. Output flexes automatically between 10W, 7.5W, and 5W depending on your device, ensuring iPhones, Samsung Galaxy handsets, and a wide range of other Qi-enabled smartphones receive the fastest charge their hardware supports. Beneath the surface, a built-in anti-magnetic cooling sheet protects both the charger and your device during extended use, while the anti-slip rubber mat keeps your phone seated firmly even on unmade roads or sharp bends. A subtle colour signal light confirms charging status at a glance — discreet enough to suit the Velar's cabin, but clear enough to be useful. All wiring routes cleanly behind the panel, leaving absolutely no loose cables in sight. What's Included 🔌 Wireless Charging Panel Direct-fit tray for Range Rover Velar 2017–2019 🔧 Wiring Harness Connects to OEM cigarette lighter or USB port 📄 Installation Guide Step-by-step fitting instructions included 🛡️ Anti-Magnetic Sheet Built-in cooling and magnetic interference protection Product Highlights Precision-moulded direct-fit design for Range Rover Velar 2017, 2018 & 2019 Three-coil Qi layout eliminates charging blind spots across the entire pad surface Supports up to 10W fast charging for Samsung, 7.5W for Apple, and 5W universal QC 3.0 standard — intelligent power delivery matched to your device Built-in anti-magnetic cooling sheet for safe, stable long-duration charging Advanced anti-slip rubber mat keeps your device secure at all times Discrete colour signal light confirms charging status without distraction Full hidden wiring — no exposed cables, no compromised centre console aesthetics Original-style OEM appearance — blends seamlessly with Velar interior design Wide operating temperature range: −30°C to +80°C — suitable for all climates Technical Specifications Parameter Specification Process Standard Vehicle / Automotive Grade Input Voltage 9V – 16V DC Power Output 10W / 7.5W / 5W (auto-adaptive) Charging Frequency 110 kHz – 205 kHz Charging Efficiency >70% Operating Temperature −30°C to +80°C Wireless Standard Qi (3-Coil) Quick Charge Standard QC 3.0 Device Compatibility Brand Compatible Models Status Apple iPhone iPhone 8, 8 Plus, X, XS, XS Max, XR Direct Fit Samsung Galaxy S6, S6 Edge, S6 Edge+, S7, S7 Edge, S8, S8+, S9, S9+, S10, S10+, S10e, Note 5, Note 8, Note 9 Direct Fit Google Pixel / Nexus Nexus 4, 5, 6, 7 / Pixel 3, Pixel 3 XL Direct Fit LG G2, G3, G6, G6+, V30, V30s ThinQ Direct Fit Nokia Lumia 820, 830, 920, 925, 928, 929, 930, 1020, 1520 / Nokia 7 Plus, 8 Sirocco Direct Fit Motorola Moto 360, Moto X Pro, Moto Mini, Droid 5 Direct Fit Apple AirPods All generations Not Supported Non-Qi Devices Phones without native wireless charging Requires Receiver Phones without built-in Qi wireless charging can be supported with the addition of a separately purchased wireless receiver adapter. Installation Notes Difficulty: Moderate  ·  Estimated Time: 30–60 Minutes Ensure your Range Rover Velar is switched off before beginning. Confirm your vehicle is a 2017, 2018 or 2019 model year to verify direct fitment. For straightforward installations, locate the OEM cigarette lighter or USB port beneath the centre console and connect the wiring harness directly — no panel removal required. For a fully concealed hidden-wire installation, carefully remove the centre control tray panel using appropriate trim removal tools to avoid scratching surrounding surfaces. Route the wiring harness to the rear of the cigarette lighter socket and establish a secure connection. Tuck all excess cabling neatly into the cavity. Press the new wireless charging panel firmly into position. The precision-moulded housing should seat flush with the surrounding trim with no gaps or movement. Restore power to the vehicle, place a compatible device on the pad, and confirm the charging signal light illuminates. ⚠ Note: Steps requiring removal of the centre control panel are best carried out by a professional automotive technician to avoid damage to surrounding trim or wiring. Metal objects such as coins, IC cards, or bank cards placed between your phone and the charging surface will interrupt charging. Phone cases up to 4mm thick are generally compatible; thicker cases may reduce charging speed. Explore More Velar Accessories This wireless charging panel is just one of many precision upgrades available for the Range Rover Velar. Browse the full Velar collection at Victorious Automotive to find interior enhancements, protection accessories, and styling upgrades designed specifically for your vehicle. Shop All Range Rover Velar Accessories → Upgrade Your Velar. Zero Compromise. Victorious Automotive supplies premium accessories to Range Rover owners across the world. Every product is selected for quality, fitment accuracy, and respect for your vehicle's original design intent. Shop Range Rover Velar Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All brand names and vehicle model references are used for fitment identification purposes only. Vehicle trademarks remain the property of their respective owners.

Jaguar Accessories · Steering Wheel · Interior Styling Steering Wheel Ring Decals for Jaguar XF, XE, F-PACE & F-TYPE Premium aluminum steering wheel badge decals with precision color-change design—elevate your cabin with OEM-inspired luxury styling. Jaguar OEM Design 2010–2026 Aluminum Alloy Color Change Finish Internal Mount DSYCAR Brand Overview Jaguar drivers demand refinement—from the moment your hands meet the wheel. These steering wheel ring decals bring factory-inspired elegance to your XF, XE, F-PACE, or F-TYPE, replacing the stock emblem with a precision-engineered aluminum piece that catches light and complements your interior in ways the original simply cannot. Crafted from premium zinc alloy with a sophisticated color-change finish, these decals deliver visual depth and modern luxury appeal. Whether you're upgrading a 2010-era XF or a current-generation F-TYPE, this detail transforms your driving experience every single time you grip the wheel. Installation is straightforward—no modifications required. These are designed as OEM-specification replacements for internal steering wheel badge mounting, so they integrate seamlessly with your vehicle's existing geometry and design language. What's Included 🎯 Steering Wheel Decal Premium aluminum ring emblem with color-change coating ✓ OEM-Spec Design Engineered to factory dimensions and mounting points 📦 Unpackaged Arrives ready to install—minimal packaging to reduce waste ⚡ Customized Finish Color-change treatment visible in varied lighting conditions Product Highlights Premium zinc alloy construction for durability and weight distribution Color-change finish reveals different hues depending on light angle and intensity OEM-specification replacement—no modification to steering wheel required Precision-engineered to Jaguar factory tolerances and mounting geometry Compatible with XF, XE, F-PACE, and F-TYPE across multiple generations Internal mounting—protected from weather and road debris exposure Creative sticker category design—balances form and function seamlessly DSYCAR brand engineering—trusted by Jaguar enthusiasts worldwide Transforms cabin ambiance without affecting steering feel or ergonomics Subtle luxury upgrade that reflects your attention to detail Compatibility Jaguar Model Years Fitment XF 2010–2026 Direct Fit XE 2015–2026 Direct Fit F-PACE 2015–2026 Direct Fit F-TYPE 2013–2026 Direct Fit Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Remove the steering wheel (or access via wheel removal if your model allows badge replacement without full wheel removal) Gently prise the existing emblem or decal from the steering wheel ring using a soft plastic tool Clean the mounting surface with a lint-free cloth and mild alcohol solution Allow surface to dry completely Position the new aluminum decal, aligning with mounting points or adhesive guides Apply firm, even pressure for 10–15 seconds to ensure full adhesion Allow 24 hours before first drive to ensure complete cure Note: If your Jaguar requires full steering wheel removal, consult your owner's manual or a qualified technician. Do not attempt removal if you are unfamiliar with steering column safety procedures. Internal airbag systems require careful handling. Complete Your Interior Upgrade These steering wheel decals are the detail your Jaguar deserves—a subtle but unmistakable mark of craftsmanship every time you drive. Pair with other interior accents to elevate your cabin further. Shop Jaguar Accessories Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ 4.9★ · 12,300+ reviews ✓ Worldwide shipping via DHL & FedEx ✓ Mon–Fri 9am–7pm UK support Disclaimer: Victorious Automotive is not affiliated with Jaguar Land Rover plc or any official Jaguar brand entity. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for aftermarket personalization only.

Victorious Automotive · Range Rover Velar · Exterior Styling Rear Bumper Lower Diffuser Conversion for Range Rover Velar 2017+ Transform your standard Velar's rear end into the commanding Dynamic specification look — with a precision-engineered lower diffuser conversion that slots cleanly into place. Range Rover Velar 2017 Onwards Rear Diffuser Dynamic Conversion Laser Cut Precision Direct Fit Exterior Styling No Drilling Required Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — an SUV that blends architectural elegance with serious road presence. From launch, the Velar's Dynamic specification set it apart with a more aggressive lower rear treatment, featuring a pronounced diffuser section that gives the car a planted, performance-ready stance. If your Velar left the factory without it, you've likely noticed the difference. This rear bumper lower diffuser conversion is engineered specifically to replicate the Dynamic specification aesthetic on standard-trim Velars. Manufactured to exacting tolerances using laser-cut processes, each piece is shaped to match the precise geometry of the Velar's rear bumper — delivering a seamless result that looks entirely factory-fitted. No filler, no guesswork, no compromise on finish quality. Whether you're looking to complete a full exterior refresh or simply elevate the rear profile of your Velar to match the top-of-the-range spec, this conversion delivers the visual upgrade with the kind of fit and finish you'd expect from a premium aftermarket specialist. It's the detail that makes the difference. What's Included 🔲 Lower Diffuser Panel Dynamic-spec rear bumper lower section conversion piece 🔩 Fitting Hardware All required fixings and mounting clips included 📋 Installation Guide Step-by-step fitment instructions for a clean install ✅ Quality Check Tag Each unit inspected before dispatch Product Highlights Converts standard Velar to Dynamic rear specification Laser-cut manufacturing for precision panel alignment Direct fit — no cutting, drilling or modification required Designed specifically for Range Rover Velar 2017 onwards High-quality construction built to withstand road conditions Seamless integration with existing rear bumper geometry Clean, factory-finish appearance when installed correctly Lightweight — does not affect vehicle dynamics or performance Supplied with all necessary fitting hardware Straightforward installation suitable for home fitting Compatibility Vehicle Year Range Trim Fitment Range Rover Velar 2017 – 2022 Standard / S / SE / HSE Direct Fit Range Rover Velar 2017 – 2022 R-Dynamic (Dynamic Spec) Not Required Range Rover Velar 2023 Onwards (Facelift) All Trims Not Compatible Range Rover Evoque All Years All Trims Not Compatible Range Rover Sport L494 All Years All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Basic Hand Tools Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the rear bumper area. Carefully clean the lower rear bumper area to remove any road grime, wax or debris that may affect panel alignment or adhesion. Test-fit the diffuser conversion panel against the lower bumper to confirm alignment and familiarise yourself with the mounting points before final installation. Locate and engage the supplied mounting clips or hardware into the corresponding fixing points on the existing bumper structure. Press the diffuser panel firmly and evenly into position, working from the centre outward to ensure a flush, gap-free finish along all edges. Verify that all clips are fully seated, check panel alignment from a distance, and confirm no flex or movement is present before signing off the install. ⚠ Please Note: If your Velar is fitted with a tow bar, parking sensors, or aftermarket exhaust exits in the lower bumper area, please contact our team before ordering to confirm fitment compatibility. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Velar the Right Way Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium styling upgrades. Shipped worldwide via DHL, FedEx and UPS — and backed by our 30-day money-back guarantee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations and trademarks are the property of their respective owners and are referenced solely for the purpose of product fitment identification.

Tesla · Model 3 · Interior Trim Carbon Fibre Dashboard for Tesla Model 3 Authentic carbon fibre dashboard upgrade that transforms your Model 3's interior with contemporary luxury and precision engineering. T3 2016–2019 Carbon Fibre One-Piece Design Matte & Glossy Overview This carbon fibre dashboard panel is engineered specifically for Tesla Model 3 (2016–2019), delivering a seamless interior upgrade that elevates your driving environment. Built from authentic carbon fibre with precision laser-cut accuracy, this dash panel replaces the factory unit with minimal effort and zero compromise on fit quality. The one-piece design eliminates panel lines and visual breaks, creating a modern, cohesive look that complements the Model 3's minimalist aesthetic. Choose between matte for a subtle, technical appearance or glossy for high-impact visual presence. Pre-applied adhesive makes installation straightforward—no additional bonding agents or specialist tools required. Whether you're refining your cabin's visual hierarchy or adding genuine carbon fibre accents throughout, this dashboard panel works as both a standalone upgrade and part of a complete interior transformation. It's built for enthusiasts who demand quality materials, precision fit, and understated luxury. What's Included 📦 Carbon Fibre Dashboard Panel Precision laser-cut, one-piece design 🔧 Pre-Applied Adhesive Ready to install, no extra bonding needed 📋 Installation Guide Step-by-step instructions included Product Highlights Authentic carbon fibre construction Precision laser-cut for flawless fit One-piece seamless design Matte or Glossy finish options Pre-applied premium adhesive Contemporary, minimalist aesthetic Lightweight material adds no weight penalty Durable, UV-resistant finish Easy DIY installation Tailored for 2016–2019 Model 3 Compatibility & Variants Model & Year Fit Finish Options Tesla Model 3 (2016–2019) Direct Fit Matte, Glossy Tesla Model 3 (2020+) Not Compatible — Installation Difficulty: Beginner | Time: 20–30 minutes Power off vehicle and disable any active displays or autopilot functions. Gently remove the factory dashboard panel using a trim removal tool or soft plastic lever. Clean the underlying surface thoroughly with isopropyl alcohol and allow to dry completely. Carefully peel back the pre-applied adhesive backing and position the carbon fibre panel, starting from the centre and working outward. Press firmly across the entire surface to ensure full contact and adhesion. Allow 24 hours of cure time before operating any dashboard controls or adjusting the panel. Important: Verify your Model 3 year (2016–2019) before purchase. Interior panel dimensions and fitment vary between production runs. If you're unsure, contact support at +44 203 943 9919 (Mon–Fri 9am–7pm) for confirmation. Ready to Upgrade Your Interior? Transform your Tesla Model 3's cabin with authentic carbon fibre that combines modern aesthetics with premium material quality. Direct Fit for 2016–2019 models, installed in under 30 minutes. Add to Cart Use code 22GET20 for 20% off when you order 2+ items. ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with or endorsed by Tesla, Inc. or any official Tesla subsidiary. All vehicle names and trademarks are property of their respective manufacturers. This product is an aftermarket accessory designed for independent use and customisation.

Victorious Automotive · Range Rover Evoque · Interior Trim Matte Silver ABS Rear Row Cup Holder Cover Trim — Range Rover Evoque 2019–2020 A precision-fit interior trim piece that brings a refined matte silver accent to your Evoque's rear cup holder surround — installed in minutes, no tools required. Evoque L551 2019–2020 ABS Plastic Matte Silver Rear Interior Cup Holder Trim 3M Tape Install ISO 9001 Certified Overview The Range Rover Evoque has always punched above its weight in terms of interior refinement — it's a compact SUV that genuinely feels premium. For 2019 and 2020 model year Evoque owners, the rear cabin experience is just as important as the front, and the smallest details contribute to that sense of quality. The rear cup holder surround, while functional, can look understated compared to the rest of the cabin's character. This matte silver ABS cup holder cover trim from metyoucar is designed specifically to overlay the rear row cup holder bezel on the Range Rover Evoque (2019–2020), as well as the Range Rover Velar (2017–2019). Crafted from high-grade ABS plastic with a satin matte silver finish, it integrates seamlessly with the surrounding trim to create a cohesive, factory-adjacent aesthetic — without the factory price tag. The piece weighs just 29 grams and attaches cleanly via pre-applied 3M adhesive tape on the reverse face. There's no drilling, no permanent modification, and no specialist tools needed. It's the kind of subtle upgrade that you'll notice every time you get in, and that rear passengers will appreciate just as much as you do. What's Included 🪄 Rear Cup Holder Cover Trim ×1 — Matte silver ABS overlay piece, pre-fitted with 3M adhesive 🔲 3M Adhesive Backing Pre-applied to reverse face for clean, residue-free bonding 📋 Installation Guide Basic fitting instructions included in packaging Product Highlights Precision-engineered fit for Evoque 2019–2020 rear cup holder surround Also compatible with Range Rover Velar 2017–2019 High-quality ABS plastic construction — durable and lightweight at just 29g Matte silver finish complements Evoque's interior colour palette 3M adhesive backing provides strong, long-lasting bond without drilling Tool-free installation — completed in under 5 minutes ISO 9001 certified manufacturing process for consistent quality No permanent modification to your vehicle's trim or panels Reversible — can be removed cleanly if required Ideal for refreshing worn or scratched original cup holder surrounds Compatibility Vehicle Model Code Year Range Fitment Range Rover Evoque L551 2019 – 2020 Direct Fit Range Rover Velar L560 2017 – 2019 Direct Fit Range Rover Evoque L538 (Mk1) 2011 – 2018 Not Compatible Range Rover Evoque L551 2021 onwards Verify Before Purchase Range Rover Sport L494 2013 – 2022 Not Compatible Land Rover Discovery Sport L550 2015 – 2022 Not Compatible If your model year falls outside the listed range or you're unsure of your vehicle's trim variant, please contact us before ordering — we're happy to confirm fitment. Installation Notes ⏱ Estimated Time: 5 minutes  |  🔧 Difficulty: Beginner  |  🛠 Tools Required: None Ensure the existing rear cup holder surround is clean, dry, and free from dust or grease. Use an alcohol wipe or IPA solution for best adhesion. Test-fit the trim piece over the cup holder surround without removing the 3M backing to confirm alignment and orientation. Once satisfied with positioning, peel the protective film from the 3M adhesive backing on the reverse of the trim piece. Carefully align the trim piece over the cup holder surround and press firmly into place, applying consistent pressure across the full surface for 30–60 seconds. Allow 24 hours for the adhesive to fully cure before subjecting the trim to heavy use or cleaning. ⚠ Note: Avoid fitting in cold temperatures below 10°C as this may reduce initial adhesive effectiveness. Do not use silicone-based cleaners on or near the trim as these can compromise the bond over time. Elevate Your Evoque's Rear Cabin Small details define the premium experience. Browse the full Range Rover Evoque interior accessories collection at Victorious Automotive and build a cabin that reflects how much you care about your vehicle. Shop Range Rover Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Mercedes-Benz · Exhaust Covers AMG Quad Pipe Exhaust Cover for Mercedes-Benz GLC, A, B, C, E-Class (2016–2017) Premium stainless steel exhaust trim that elevates your Mercedes aesthetic with a sporty, high-performance finish. GLC W205 W213 W176 W246 2016–2017 304 Stainless Steel Quad Pipe Design Tape Install Overview Designed for Mercedes-Benz owners who demand visual authenticity without compromise, this AMG exhaust cover transforms the rear end of your C-Class W205 Coupe, GLC Class, B-Class W246, E-Class W213 Coupe, and A-Class W176 into a statement of refined sportiness. The quad-pipe aesthetic mimics high-spec AMG models, giving your vehicle an instantly elevated presence. Engineered from marine-grade 304 stainless steel, this cover delivers the durability and mirror finish expected in premium automotive accessories. Available in shiny silver or gloss black, it integrates seamlessly with your Mercedes' design language while resisting salt spray, UV exposure, and weathering. Installation is refreshingly straightforward—automotive-grade double-sided adhesive tape eliminates the need for tools, welding, or professional fitting. Most owners complete the job in under 15 minutes per side. What's Included 📦 Exhaust Covers (Pair) 2× stainless steel quad-pipe covers 🧴 Adhesive Tape (Pre-Applied) Automotive-grade double-sided tape 📋 Fitting Guide Step-by-step installation instructions ✓ Quality Assurance Pre-fit tested on your vehicle model Product Highlights 304 stainless steel construction for superior corrosion resistance Available in shiny silver and gloss black finishes Thicker gauge material for authentic proportional appeal Pre-applied automotive-grade adhesive tape No tools, welding, or drilling required Fits factory exhaust pipes precisely Mirrors OEM AMG quad-pipe styling Weather-resistant and salt-spray tested 30-day money-back guarantee on all purchases Comprehensive vehicle compatibility support Compatibility Model Code Years Fit C-Class Coupe W205 2015–2017 Direct Fit GLC Class C253 2016–2017 Direct Fit B-Class W246 2015–2016 Direct Fit E-Class Coupe W213 2014–2017 Direct Fit A-Class W176 2016–2017 Direct Fit Installation Notes Difficulty: Beginner | Time: 15 minutes per side Clean and dry the exhaust pipe surface thoroughly with a microfiber cloth and isopropyl alcohol. Remove the protective backing from the pre-applied adhesive tape on the exhaust cover. Carefully position the cover over the exhaust pipe, aligning it with the factory outlet. Press firmly and evenly across the entire surface for 20 seconds to ensure full adhesion. Allow 24 hours of cure time before exposure to heat or high speeds. Repeat steps 1–5 for the second cover. Important: Allow the exhaust system to cool completely before installation. Wet or contaminated exhaust pipes will compromise adhesive performance. Do not install on vehicles exceeding factory exhaust temperatures. Elevate Your Mercedes Styling Join thousands of discerning Mercedes owners who've transformed their rear fascia with premium quad-pipe exhaust covers. Authentic AMG looks, professional finishing, backed by Victorious Automotive's 30-day guarantee. View Current Stock Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 🌍 Worldwide shipping via DHL 📞 +44 203 943 9919 ↩️ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official OEM entity. Product compatibility is based on published factory specifications. Always verify fitment before purchase. Improper installation may void vehicle warranty; consult your dealership if unsure.

Victorious · Porsche · Key Fob Protection Premium Porsche 3-Piece Chrome Silver Remote Key Case Professional-grade fob protection for Porsche 911, Panamera, Macan, and Cayman models. Keep your keyless entry secure in style. Porsche 911 · Panamera · Macan · Cayman Chrome Silver Plastic Construction 3-Piece Set Overview Your Porsche remote fob is one of the most frequently used and vulnerable components of your vehicle. Every pocket, bag, and center console drop risks damage to the sensitive internal electronics. This premium three-piece chrome silver key case provides professional-grade protection without compromising the iconic aesthetic of your Porsche. Engineered from durable plastic with a premium chrome silver finish, each case in this three-piece set offers custom fitment for Porsche's latest and most iconic models—including the 911, Panamera, Macan, and Cayman. The protective design shields your fob from impact, dust, and minor abrasion while maintaining full button accessibility and wireless range. Why it works: Unlike generic key cases, this set is specifically contoured for Porsche remotes, ensuring a precision fit that doesn't add bulk or interfere with your fob's functionality. The chrome silver finish complements any Porsche's interior, and the three-piece quantity gives you options for multiple vehicles or as backup protection. What's Included 🔐 3× Remote Key Cases Chrome silver finish, custom-fit for Porsche fobs ✓ Full Button Access All functions remain responsive and fully operational 🛡️ Impact Protection Absorbs drops and daily wear while protecting electronics Product Highlights Precision-fit design for Porsche 911, Panamera, Macan, and Cayman remotes Premium chrome silver finish matches Porsche interior styling Three-piece set—protect multiple fobs or keep spares Durable plastic construction resists scratches and impact Ultra-slim profile adds minimal bulk to your keychain Full wireless range maintained—no signal interference All buttons remain fully functional and responsive Easy snap-on installation—no tools required Lightweight and pocket-friendly design Lifetime durability for long-term remote protection Compatibility Porsche Model Year Range Fitment 911 2013–2026 Direct Fit Panamera 2013–2026 Direct Fit Macan 2013–2026 Direct Fit Cayman 2013–2026 Direct Fit Installation Notes Assembly & Fit — 2 minutes, no tools Remove your Porsche remote fob from your pocket or keychain. Align the fob with the interior contours of the chrome silver case. Gently press the fob into the case until fully seated and snug. Press all buttons to confirm full responsiveness and accessibility. Your fob is now protected. Repeat for remaining cases if using multiples. Note: This case is designed for Porsche factory remotes only. If you have a third-party or aftermarket fob, verify button layout and dimensions before installation. All buttons must remain fully pressable after fitting. Protect Your Porsche Fob Today Premium key case protection backed by Victorious Automotive's 30-day money-back guarantee and worldwide shipping via DHL, FedEx, UPS, and TNT. Join 12,300+ verified customers with a 4.9/5-star rating. Add to Cart Use code 22GET20 for 20% off any 2 items 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide Shipping via trusted carriers ✓ 30-Day Money-Back Guarantee ⭐ 4.9/5 Stars from 12,300+ reviews Victorious Automotive is an independent accessory specialist and is not affiliated with Porsche AG, Dr. Ing. h.c. F. Porsche AG, or any official Porsche subsidiary. All product names and logos are trademarks of their respective owners. This product is designed for aftermarket use and compatibility with the models listed above.

Victorious · Mercedes GLS · Exterior Trim 2020 Mercedes GLS High Gloss Black Exhaust Trim Precision-engineered exhaust finisher set that transforms the rear end of your GLS with understated luxury and flawless fitment. 2020 Model Mercedes GLS Stainless Steel High Gloss Black Direct Fit Overview The Mercedes GLS demands components that honour its refined character. This exhaust trim set has been engineered to deliver a seamless visual enhancement to your 2020 model, integrating with the factory rear fascia without compromise. Constructed from premium stainless steel and finished in elegant high gloss black, these trims offer immediate aesthetic uplift. The two-piece configuration ensures straightforward installation, while the material resists oxidation and thermal stress—critical for components positioned this close to the exhaust outlet. Whether you're prioritizing a subtle performance aesthetic or simply want to refine the rear profile, this trim set delivers. It's a finishing touch that catches light without shouting. What's Included 🔧 2x Exhaust Trim Finishers High gloss black stainless steel 📋 Installation Guide Step-by-step fitment reference 🛡️ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights Premium stainless steel construction resists corrosion and heat stress High gloss black finish maintains appearance through thermal cycling Two-piece set for symmetrical rear fascia coverage Direct fit design—no drilling, cutting, or welding required Factory-spec alignment with OEM exhaust outlets Lightweight profile preserves suspension geometry Simple adhesive and mechanical fastening method Compatible with factory paint protection films Thermal-rated materials ensure longevity under exhaust heat Instant visual refinement with zero performance impact Compatibility Vehicle Model Model Years Status Mercedes-AMG GLS 2020 Direct Fit Mercedes GLS 580 2020 Direct Fit Mercedes GLS 450 2020 Direct Fit Mercedes GLS (2021+) 2021–Present Not Compatible Other Mercedes Models All Years Not Compatible Installation Difficulty Level: Beginner | Time Required: 30–45 minutes Prepare the vehicle: Park on a level surface and allow the exhaust system to cool completely. Do not attempt installation while the vehicle is warm. Clean the rear fascia: Use a microfiber cloth and mild detergent to remove any dirt, oil, or residue from the area where the trim will be mounted. Dry thoroughly: Air-dry or use a clean cloth to ensure the surface is completely free of moisture before proceeding. Position the first trim: Align the left exhaust trim finisher with the factory exhaust outlet. Ensure it sits flush against the rear bumper fascia. Secure the first piece: Apply the provided adhesive strip to the back of the trim and press firmly into place for 10–15 seconds. If mechanical fasteners are included, install them according to the fitment guide. Install the right trim: Repeat the process for the second trim finisher, maintaining symmetry with the first piece. Cure time: Allow the adhesive to set for 24 hours before driving. Avoid washing or exposing the vehicle to moisture during this period. Final inspection: Once cured, inspect the fitment visually and by hand. Both trim pieces should sit flush with no gaps or movement. ⚠️ Important: Do not use the vehicle immediately after installation. Adhesive requires full cure time. High-speed driving or thermal shock before cure can compromise adhesion. If fasteners are used, ensure they are tightened to the specified torque to avoid vibration or loosening. Ready to Refine Your GLS? Add understated elegance to your 2020 Mercedes GLS with this precision-engineered exhaust trim set. Simple fitment, lasting durability, and the confidence that comes from owning components designed by enthusiasts for discerning owners. Shop Now Use discount code 22GET20 for 20% off any 2 items at checkout. ✓ 4.9/5 stars from 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any subsidiary. All product names and references are used for identification and compatibility purposes only. This product is an aftermarket accessory and does not carry any factory warranty from the vehicle manufacturer.

Tesla · Model S / X · Interior Carbon Fiber Navigation Frame – Tesla Model S & X Premium real carbon fiber trim that elevates your centre console with bold, modern styling. Model S / X 2014–2019 Real Carbon Fiber Easy Install Overview The Tesla Model S and Model X have become icons of electric performance and luxury. Their minimalist interiors demand equally refined accessories that enhance without compromising the original design language. This navigation frame is crafted from genuine carbon fibre and engineered specifically for 2014–2019 Model S and Model X vehicles. It frames your centre touchscreen with unmistakable carbon weave texture, adding depth, dimension, and visual interest to an otherwise flat dash. The frame is pre-cut to fit precisely, requiring only clean application via industrial-strength double-sided adhesive tape. If you value interior detail and want your Tesla to reflect the same precision engineering as its powertrain, this is the upgrade that delivers. The carbon weave catches light beautifully and complements both minimalist and personalized cabin aesthetics. What's Included 🎯 Carbon Fibre Frame Precision-cut, pre-formatted for direct fit 📦 Adhesive Backing Industrial double-sided tape pre-applied 📖 Fitment Guide Step-by-step installation instructions Product Highlights Genuine carbon fibre weave – not plastic or printed vinyl Precision-cut for 2014–2019 Model S & X Pre-applied industrial adhesive for hassle-free fitment Adds premium visual depth to centre console Minimal tools required – no drilling or modifications Complements OEM interior design language Durable finish resists fingerprints and UV fading Lightweight – no impact on vehicle dynamics Professional appearance suitable for any interior trim colour 30-day money-back guarantee Compatibility Model Year Range Fit Status Tesla Model S 2014–2019 Direct Fit Tesla Model X 2014–2019 Direct Fit Tesla Model S 2020+ Not Compatible Tesla Model X 2020+ Not Compatible Model 3 / Y All years Not Compatible Always verify your vehicle year and interior layout before ordering. If you're unsure, contact our team: +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Difficulty: Easy | Time: 15–20 minutes Power off the vehicle and allow the interior to cool to room temperature. Gently clean the centre console area around your navigation screen with isopropyl alcohol. Remove all dust, oils, and residue. Allow to dry completely (2–3 minutes). Carefully peel back the protective film from the adhesive backing on the carbon fibre frame. Position the frame around the navigation screen, ensuring all edges align flush with the dashboard contours. Press firmly from the centre outward, working air bubbles toward the edges. Apply steady pressure for 30 seconds to ensure full adhesion. Allow the adhesive to cure for 24 hours before using the touchscreen or adjusting the frame. Note: Do not force the frame into position if it doesn't sit flush. Reposition and try again. The double-sided tape provides excellent hold once properly applied, but cannot be repositioned repeatedly without losing adhesive strength. Ready to Transform Your Model S or X? This carbon fibre navigation frame is the finishing touch your Tesla deserves. Precision-engineered, premium materials, and installed in under 20 minutes. Your interior will thank you. View in Shop Use code 22GET20 to save 20% on any 2 items. ⭐ 4.9/5 stars ✓ 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS ↩️ 30-day money-back Victorious Automotive is not affiliated with Tesla Inc., Elon Musk, or any Tesla subsidiaries. Tesla is a registered trademark of Tesla Inc. This product is an aftermarket accessory designed for compatibility with specified Tesla models. Always consult your vehicle manual and verify fitment before installation.

Victorious Automotive · Range Rover Velar · Interior Trim ABS Matte Silver Dashboard Trim — Range Rover Velar 2017–2020 Instantly elevate your Velar's cabin with a precision-cut matte silver dashboard control trim that delivers the SVR aesthetic without lifting a screwdriver. Range Rover Velar 2017–2020 Matte Silver ABS TPU Clip-On Fit SVR Look Interior Trim No Tools Required Overview The Range Rover Velar introduced one of the most refined and minimalist interiors ever seen in a production SUV — a clean, driver-focused cockpit defined by seamless surfaces and a near-buttonless dashboard. It's a space that rewards attention to detail, and even subtle upgrades are immediately noticeable to anyone who knows the car. This ABS matte silver dashboard control trim is engineered specifically for the 2017–2020 Range Rover Velar. Laser-cut to match the exact contours of the existing dashboard panel, it clips directly over the factory surface with no adhesive, no drilling, and no modification of any kind. The matte silver TPU finish introduces a premium, tactile contrast to the Velar's typically dark interior palette — closely mirroring the interior specification found on top-tier SVR and HSE Dynamic derivatives. Whether you're building out a full interior package or simply refreshing the cabin with a single accent piece, this trim is one of the most cost-effective ways to change the visual character of your Velar's centre dashboard zone. The clip-on design means it's reversible at any time — perfect if you're keeping the car near-standard for resale while still enjoying a more personalised drive every day. What's Included 🪄 Dashboard Trim Panel Matte silver ABS TPU, laser-cut to Velar spec 📎 Pre-Fitted Clips Factory-aligned retention clips, no extras needed 📄 Installation Guide Simple step-by-step fitting instructions included 🛡️ Protective Packaging Foam-padded to prevent transit scratches Product Highlights Precision laser-cut for an exact, flush fit on the Velar dashboard Clip-over installation — no tools, adhesive, or drilling required Premium matte silver TPU finish resists fingerprints and glare Fully reversible — restores to factory standard in minutes Replicates the SVR and HSE Dynamic interior specification Compatible with all trim levels across the 2017–2020 Velar range Part of a wider Velar interior package for a coordinated look Lightweight construction with no impact on dashboard function Durable ABS core maintains shape in high cabin temperatures Ships worldwide via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar 2017–2020 S / SE / R-Dynamic SE / HSE / HSE Dynamic Direct Fit Range Rover Velar 2021–2022 All Variants Verify Before Order Range Rover Velar SVAutobiography 2017–2020 SVAutobiography Dynamic Direct Fit Range Rover Sport L494 2013–2020 All Not Compatible Range Rover Evoque L538 All Years All Not Compatible Range Rover Vogue L405 2013–2020 All Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 5–10 Minutes  |  🛠 Tools Required: None Ensure the existing dashboard surface is clean and free from dust or oils — a dry microfibre cloth works well. Remove the trim piece from its protective packaging and orient it correctly against the dashboard control zone to confirm alignment before fitting. Starting from one edge, align the integrated clips with the factory panel edges and apply gentle, even pressure along the trim length. Work along the full length of the piece, pressing each clip into place until you hear or feel a secure engagement at each point. Run your finger along the full perimeter to confirm a flush, gap-free fit against the dashboard surface. No adhesive or finishing required. Note: Avoid forcing the trim if resistance is felt — recheck alignment before applying further pressure. Do not use heat guns or adhesives, as these may damage the factory dashboard surface or void your vehicle warranty. Complete Your Velar Interior This dashboard trim is part of our full Range Rover Velar interior accessory collection. Pair it with matching silver accent pieces for a truly coordinated cabin transformation. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Velar · Interior Trim Matte Silver Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Elevate the rear cabin of your Velar with a precision-cut matte silver TPU trim cover that delivers the SVR aesthetic in minutes — no tools, no fuss. Range Rover Velar 2017–2020 Matte Silver TPU Material Clip-On Fit SVR Look Rear Climate Control Interior Upgrade No Drilling Overview The Range Rover Velar arrived as one of Land Rover's most design-forward models — a cabin defined by clean lines, flush surfaces, and minimalist touches that set it apart from anything else in the segment. But even a vehicle this considered leaves room for the kind of detail that separates a standard specification from something truly special. The rear climate control panel is one of those areas: functional, often overlooked, and entirely worthy of an upgrade. This matte silver rear air conditioning trim is engineered specifically for the Range Rover Velar produced between 2017 and 2020. Precision laser-cut from high-quality TPU (thermoplastic polyurethane), it clips directly over the existing rear climate cover with no adhesives, no cutting, and no permanent modification. The result is a clean, factory-quality finish that immediately draws the eye — exactly the kind of detail you'd find on the flagship SVR models. Forming part of the wider Victorious interior package for the Velar, this trim works beautifully in isolation or as part of a cohesive cabin refresh. Whether you're building out a full interior upgrade or simply refining one detail at a time, this is the kind of piece that quietly elevates the entire space. What's Included 🪟 Rear A/C Trim Cover 1× matte silver TPU clip-on panel 📄 Fitting Guide Step-by-step installation instructions 📦 Protective Packaging Secured for safe international delivery Product Highlights Precision laser-cut for exact fitment on the Velar rear climate panel High-quality TPU construction — flexible, durable, scratch-resistant Matte silver finish replicates the SVR interior aesthetic Clips directly over the existing cover — zero permanent modification No tools, adhesives, or professional installation required Part of the full Victorious Velar interior upgrade package Consistent colour tone across matte silver interior trim collections Maintains full functionality of rear climate controls post-fit Lightweight and precisely formed — no panel gap or flex Reversible install — original cover restored in seconds if needed Compatibility Vehicle Year Range Trim Level Fitment Range Rover Velar 2017–2020 S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar 2021–2023 All Trims (facelift) Not Compatible Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Evoque L538 2012–2019 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Ensure the rear cabin area is clean and free of dust or moisture before beginning installation. Remove the matte silver trim piece from its protective packaging and orient it correctly against the existing rear climate control panel. Starting from one edge, gently align the trim clip along the outer perimeter of the existing cover, ensuring the cutouts line up with the air vents and control slots. Apply even, gentle pressure across the surface until all clips engage with an audible click — confirming a secure, flush fit. Run a finger lightly around all edges to confirm there are no gaps or lifted sections. Test rear climate controls to verify full function is retained. Note: This trim is designed for the pre-facelift Range Rover Velar (2017–2020 only). Panel dimensions differ on 2021+ models. If you're unsure of your build year, check your VIN plate or contact us before ordering. Complete the Look This rear A/C trim is one part of a full Victorious interior upgrade package for the Range Rover Velar. Explore matching silver trim pieces for the dashboard, door panels, and centre console to achieve a cohesive, factory-grade SVR-inspired finish throughout the cabin. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Mini · Interior Bling Diamond Swarovski Surround for Mini Steering Wheel Add luxury sparkle to your Mini's cabin with premium Swarovski-style crystal trim and effortless stick-on installation. Mini F60 F56 R60 R58 Swarovski Crystal Gold & Silver Easy Install Pre-Applied Adhesive Overview Mini owners who demand personalisation understand that every detail counts. The steering wheel is one of the most visible focal points in your cabin—it's where your hands spend countless hours, and it sets the tone for your entire driving experience. This Diamond Swarovski Surround transforms that everyday component into a statement of elegance and individuality. Crafted from high-quality materials with genuine Swarovski-style crystals, this steering wheel trim catches light beautifully and adds an unmistakable touch of luxury to your Mini's interior. The surround features precise engineering to fit your steering wheel perfectly, with a sleek profile that complements both modern and classic Mini aesthetics. Choose between stunning Gold or Silver finishes to match your cabin's existing trim and personal taste. Installation takes minutes, thanks to the pre-applied adhesive backing—no tools, no mess, no guesswork. Clean, apply, and drive with newfound confidence. What's Included ✨ Steering Wheel Trim Diamond Swarovski-style surround 🔧 Pre-Applied Adhesive Ready to install straight from box 📦 Premium Packaging Secure, pristine delivery Product Highlights Genuine Swarovski-style crystal design for authentic luxury sparkle Premium high-quality materials engineered for lasting elegance Gold or Silver finish—choose to match your cabin aesthetic Pre-applied adhesive tape for hassle-free, tool-free installation Precision-fit design for Mini F60, F56, F55, F54, R60, R58, R55 models Lightweight and durable—won't affect steering wheel functionality Easy to clean and maintain with standard automotive care products Adds personalised luxury without permanent modification Professional-grade finish rivals OEM trim quality Express individuality while maintaining resale appeal Compatibility Mini Model Year Range Compatibility F60 Countryman 2017–2024 Direct Fit F56 Hatch 3rd Gen 2014–2023 Direct Fit F55 Clubman 2nd Gen 2015–2023 Direct Fit F54 Clubman 1st Gen 2007–2015 Direct Fit R60 Countryman 1st Gen 2010–2017 Direct Fit R58 Coupe 2011–2015 Direct Fit R55 Clubman 1st Gen 2007–2014 Direct Fit R56 Hatch 2nd Gen 2006–2014 Not Compatible Installation Guide Difficulty: Beginner | Time: 5–10 minutes Prepare the surface. Ensure your steering wheel is completely clean and dry. Use a microfibre cloth and mild automotive cleaner to remove any dust, oils, or residue from the rim area. Position the trim. Carefully align the Diamond Swarovski Surround with your steering wheel. Start at the top centre and work your way around to ensure even placement. Apply with confidence. Press firmly along the entire length of the trim, starting from the centre and working outward. The pre-applied adhesive will bond immediately to a clean surface. Allow cure time. Let the adhesive set for 24 hours before using your steering wheel normally. Avoid forceful gripping during this period. Enjoy your upgrade. Your Mini now features a stunning luxury accent that catches every light and turn. Important: Clean the steering wheel thoroughly before installation. Any dust or residue will compromise adhesion and longevity. If the surface is not pristine, adhesive may fail prematurely. Ready to Add Luxury to Your Drive? Transform your Mini's interior with this stunning diamond Swarovski steering wheel surround. Premium finish, effortless installation, and a touch of everyday elegance—all backed by Victorious's 30-day money-back guarantee and 4.9★ customer trust. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money-Back Guarantee ✓ 4.9★ Rating • 12,300+ Reviews ✓ Worldwide Shipping • DHL, FedEx, UPS ✓ Expert Support • +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mini, BMW Group, Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any official manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for aftermarket customisation only.

Premium Automotive · BMW Mini Cooper · Interior Trim Carbon Fiber Gear Shift Panel Cover for BMW Mini Cooper F54–F60 (2014–2023) OEM-style carbon fiber accent that elevates your interior with authentic motorsport styling and scratch protection. F54 / F55 / F56 / F57 / F60 2014–2023 Carbon Fiber Tool-Free Install Pre-Applied Tape Overview Built for the Mini Cooper enthusiast who refuses to compromise on detail. This carbon fiber gear shift panel cover is engineered to integrate seamlessly with F54, F55, F56, F57, and F60 models, adding a layer of premium aesthetic to your cockpit while protecting the OEM panel beneath from daily wear. Constructed from authentic carbon fiber weave, this accent delivers the visual impact of motorsport-grade finishes without the complexity. The pre-applied double-sided adhesive system ensures installation takes minutes—no cutting, no drilling, no specialist tools. Simply clean, align, and press. The result is a bespoke interior upgrade that feels factory-correct. Whether you're refreshing a standard interior or complementing other carbon fiber trim, this panel cover transforms the gear shift zone into a focal point of texture and sophistication. Durable UV-resistant construction resists fading and maintains its high-gloss finish for years. What's Included 📦 Carbon Fiber Cover 1x pre-cut panel, ready to install 🔗 Pre-Applied Adhesive Tape Double-sided 3M tape, no mess, no fuss 🧹 Cleaning Cloth Microfiber for surface prep 📖 Installation Guide Step-by-step visual instructions included Product Highlights Authentic 2×2 carbon fiber twill weave for premium motorsport appearance Custom-engineered fitment for Mini Cooper F54, F55, F56, F57, F60 (2014–2023) Pre-applied 3M automotive-grade double-sided tape for hassle-free installation Protective barrier shields OEM gear panel from scratches, spills, and UV exposure UV-resistant resin coating maintains gloss and prevents color fade over time Precision-cut edges align perfectly with OEM panel geometry—no trimming needed Zero-tool installation—no drilling, no modifications, completely reversible Complements OEM carbon fiber trim packages and custom interior builds Lightweight composite construction adds zero rotational mass or interior weight Backed by 30-day money-back guarantee and Victorious Automotive customer support Compatibility Table Model Code Production Years Fitment Status Mini Cooper F54 Clubman 2015–2023 Direct Fit Mini Cooper F55 Hatchback 2014–2023 Direct Fit Mini Cooper S F56 Hatchback 2014–2023 Direct Fit Mini Cooper S F57 Convertible 2016–2023 Direct Fit Mini Countryman F60 2017–2023 Direct Fit Mini Cooper F56 SE Electric 2019–2023 Direct Fit Pre-F54 / Older Mini Models 2013 and earlier Not Compatible Manual Transmission Models All years Direct Fit Installation Notes Difficulty Level: Beginner | Estimated Time: 5–10 Minutes Prepare the Surface: Switch off the engine and allow the interior to reach room temperature. Use the included microfiber cloth to clean the OEM gear panel thoroughly. Remove any dust, oils, or residue with a light degreaser if needed. Let dry completely. Inspect the Cover: Unbox the carbon fiber panel and inspect for any visible damage. Check the pre-applied adhesive tape—it should feel slightly tacky and show no visible dirt. Align the Cover: Carefully position the cover above the gear panel. Start at one end (typically the top) and lower it slowly, aligning all edges. Take time with this step—adhesive bonds are permanent on first contact. Press and Secure: Once aligned, press firmly across the entire surface for 30 seconds, working from top to bottom to eliminate air pockets. Apply pressure with your palm or a soft rubber applicator (do not use hard tools). Allow Full Cure: Leave the vehicle undisturbed for 24 hours before touching or shifting gears. The adhesive reaches full strength within this window. ⚠️ Important: This cover is permanent once applied. Ensure surface cleanliness and alignment before pressing down. If repositioning is needed within 30 seconds of contact, carefully peel back and realign. Do not force removal after 1 minute—adhesive will have begun bonding. Elevate Your Mini Interior Today A genuine carbon fiber panel cover transforms your gear shift zone from standard to statement. Authentic materials, zero compromise, zero installation hassle. Shop Carbon Fiber Gear Covers Add any 2 items and use code 22GET20 for 20% off your order. 4.9/5 Stars — 12,300+ verified reviews 30-Day Guarantee — Full refund, no questions asked Worldwide Shipping — DHL, FedEx, UPS, TNT Expert Support — +44 203 943 9919 (Mon–Fri, 9am–7pm) Victorious Automotive is an independent aftermarket specialist. This product is not affiliated with, endorsed by, or manufactured by BMW Group, BMW Mini, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. This listing is for reference only.

Victorious Automotive · Range Rover Evoque · Exterior Trim Exterior Hood Air Vent Outlet Wing Trim for Land Rover Range Rover Evoque (2012–2018) Protect and elevate your Evoque's bonnet air vents with a precision-fit ABS chrome trim pair that adds a factory-finished, upscale aesthetic in minutes — no tools required. Range Rover Evoque L538 2012–2018 ABS Chrome Plastic Self-Adhesive Fit 1 Pair – 2 Pieces Black & Silver / All Black CCC Certified Exterior Trim Overview The Range Rover Evoque L538 is a vehicle that wears its design credentials proudly — compact yet assertive, every exterior detail contributes to the overall character of the car. The hood air vent outlets on the Evoque's bonnet are a defining design element, but over time, exposure to UV, road debris, and everyday wear can leave them looking scuffed, discoloured, or simply underwhelming against an otherwise well-maintained exterior. These Hood Air Vent Outlet Wing Trims are purpose-designed to sit cleanly over the existing vent apertures, providing a layer of protective coverage while simultaneously upgrading the visual presence of the bonnet. Crafted from high-grade ABS plastic with a chrome finish, the trims deliver a polished, premium look that complements the Evoque's signature styling without looking aftermarket or out of place. The self-adhesive mounting system means installation is genuinely straightforward — no drilling, no brackets, no risk of damaging your paintwork. Whether you choose the dual-tone Black & Silver finish for a refined contrast effect, or the all-Black option for a stealthier, more understated look, both variants are built to last through British weather and beyond. What's Included 🔲 Hood Air Vent Wing Trims 1 Pair (2 pieces) — left & right matched set 🔧 Pre-Applied Adhesive Tape 3M-style self-adhesive backing pre-fitted to each trim 📐 Fitment: Left & Right Mirror-matched pair for symmetrical installation Product Highlights Precision-engineered to match the Evoque L538 bonnet vent profile exactly High-grade ABS plastic — lightweight, impact-resistant, and rust-proof Chrome finish adds a factory-luxury aesthetic to the bonnet vents Shields vent surfaces from scratches, chips, and environmental grime Self-adhesive backing for a clean, tool-free installation No drilling, cutting, or modification to your vehicle required Available in Black & Silver or all-Black to suit your colour scheme UV-resistant finish — won't fade or discolour in direct sunlight CCC externally tested and certified for quality assurance Compatible across a wide range of Land Rover models and year spans Compatibility Vehicle Years Fitment Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Vogue L405 2013–2018 Direct Fit Range Rover Sport L494 2014–2018 Direct Fit Land Rover Discovery 4 2010–2016 Direct Fit Land Rover Freelander 2 2007–2014 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2025 Not Compatible Range Rover Sport L461 (3rd Gen) 2022–2026 Not Compatible Range Rover Vogue L460 (5th Gen) 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your specific build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔩 Tools Required: None Clean the surface: Thoroughly clean the bonnet vent area using an isopropyl alcohol wipe or panel wipe solution. Remove all grease, wax, and residue, then allow to dry completely for a minimum of 5 minutes. Test fit before committing: Hold each trim piece in position over the corresponding vent outlet without removing the adhesive backing. Confirm alignment and orientation before proceeding. Warm the adhesive: In cooler weather, gently warm the adhesive backing with a heat gun or hairdryer on a low setting for 10–15 seconds. This improves initial bond strength significantly. Peel and position: Remove the adhesive backing from one trim piece, carefully align it to the vent outlet, and press firmly into place starting from the centre outward to eliminate air pockets. Apply firm pressure: Hold firm, even pressure across the entire trim surface for at least 30 seconds per piece to ensure full adhesive contact. Repeat for the second trim: Follow the same process for the opposite side, ensuring symmetrical placement. Cure time: Allow 24 hours before washing the vehicle or exposing the trim to heavy rain to allow the adhesive bond to fully cure. ⚠ Note: Do not attempt installation in temperatures below 10°C without pre-warming the adhesive. Cold conditions significantly reduce initial adhesion and may result in the trim lifting at the edges. Ensure the bonnet surface is completely dry before application. Shop by Vehicle Looking for more accessories for your Land Rover or Range Rover? Browse our dedicated vehicle collections below: 🚙 Range Rover Evoque L538 2012–2018 accessories 🚙 Range Rover Evoque L551 2019–2025 accessories 🚙 Range Rover Vogue L405 2013–2020 accessories 🚙 Range Rover Sport L494 2013–2020 accessories 🚙 Land Rover Discovery 4 2010–2016 accessories 🚙 Land Rover Discovery 5 2017–2023 accessories Built for Land Rover Owners Who Don't Compromise At Victorious Automotive, every product we stock is selected to meet the standards your vehicle deserves. Free worldwide shipping, a 30-day money-back guarantee, and 12,300+ verified five-star reviews speak for themselves. Shop All Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Product images are representative; slight variations in finish may occur between production batches.

Automotive · Jaguar · Interior Trim Carbon Fibre Interior Navigation Frame Trim for Jaguar E-Pace 2018–2020 Premium carbon fibre styling upgrade that instantly elevates your E-Pace cabin aesthetic with precision-engineered trim. Jaguar E-Pace 2018–2020 Carbon Fibre Style ABS Navigation Frame Interior Upgrade Overview If you own a Jaguar E-Pace from 2018 to 2020, you understand the importance of maintaining a cabin that reflects your attention to detail. The interior trim pieces set the tone for every journey, and factory plastics can feel uninspired compared to what's possible. This carbon fibre-style navigation frame trim transforms your dashboard with motorsport-inspired aesthetics. Manufactured from high-quality ABS with authentic carbon fibre finish, it's a direct replacement that requires no modification to your existing dashboard—just precision fitment and secure mounting. Unlike cheap adhesive-backed trim, this frame is engineered for durability and long-term retention. It pairs perfectly with other E-Pace interior upgrades and works seamlessly whether your cabin is leather or fabric, light or dark trim. What's Included 🎯 Navigation Frame Trim (x1) Carbon fibre-style ABS, precision-cut 🔧 Mounting Hardware Clips and fixings included 📋 Installation Guide Step-by-step fitting instructions ✅ Quality Guarantee 30-day money-back assurance Product Highlights Carbon fibre-style finish with authentic weave texture Premium ABS plastic—no cheap adhesive alternatives Precision factory-spec cut for perfect dashboard fitment Direct replacement—no modifications required Enhanced cabin perception in seconds Colour-matched to factory E-Pace trim Lightweight and durable for long-term use Compatible with all 2018–2020 E-Pace models Easy 15-minute installation (DIY-friendly) Transforms interior without altering original design intent Compatibility Vehicle Year Fitment Jaguar E-Pace 2018–2019 Direct Fit Jaguar E-Pace 2020 Direct Fit Jaguar E-Pace 2021+ Not Compatible Installation Difficulty: Beginner | Time: 15–20 minutes Disconnect the battery negative terminal to isolate the cabin electrical system during removal. Carefully prise the existing trim using a soft plastic trim tool. Work gently around all clips to avoid dashboard damage. Disconnect any wired components (lighting, sensors) if your original trim includes them. Label connectors for clarity. Clean the mounting surface with a microfibre cloth to remove dust, oils, and debris for optimal grip. Position the new carbon fibre frame and align it carefully with the dashboard aperture before securing. Secure using factory clips and supplied mounting hardware. Press firmly until you hear/feel each clip engage. Reconnect any electrical connectors if applicable, and restore battery power. Test all dashboard functions (climate, navigation, lighting) to confirm proper installation. Important: Do not force trim into position. If resistance occurs, remove and re-check clip alignment. Forcing can crack both the new trim and your dashboard. Ready to Elevate Your E-Pace? Transform your cabin in minutes with motorsport-inspired carbon fibre styling. Every detail counts—upgrade your interior today and drive with confidence. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 — 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT 💰 30-day money-back guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, or any official Jaguar brand entity. All vehicle names and trademarks remain the exclusive property of their respective manufacturers. Product names and descriptions are for compatibility reference only.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Victorious · Range Rover Velar · Interior Trim Carbon Fibre Rear Air Conditioning Trim for Range Rover Velar 2017–2020 Upgrade your climate control panel with genuine carbon fibre styling—the SVR look, simplified installation, and premium finish. Velar 2017–2020 Carbon Fibre Climate Control SVR Look Interior Package Overview Your Range Rover Velar deserves an interior that reflects its premium character. This carbon fibre rear air conditioning trim is engineered to elevate the climate control area—a detail that transforms the entire dashboard aesthetic. Built from high-quality carbon TPU with precision laser-cut edges, it delivers the aggressive, purposeful look of SVR models without modification or permanent alteration. Installation takes minutes. The trim simply clips over your existing climate cover, requiring no drilling, adhesives, or professional fitment. Perfect laser alignment ensures a factory-tight finish that integrates seamlessly with your dashboard geometry. Whether you're building a carbon interior package or adding statement detail, this piece combines visual impact with authentic material quality—a hallmark of Victorious Automotive builds. What's Included 🎨 Carbon Fibre Trim Rear A/C panel, precision-cut ✓ Clip-On Fitting No adhesive or drilling needed 📖 Fitting Guide Step-by-step instructions 🛡 30-Day Guarantee Money-back assurance Product Highlights Premium Carbon Fibre TPU Material Laser-Cut for Perfect Fit Clip-Over Installation (No Tools Required) SVR Model Aesthetic Factory-Aligned Edges Non-Permanent Fitment Compatible with 2017–2020 Velar Part of Carbon Interior Packages Durable Protective Coating Worldwide Shipping Available Compatibility Vehicle Year Range Compatibility Range Rover Velar 2017–2020 Direct Fit Range Rover Velar 2021+ Not Compatible Other Range Rover Models All Years Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Turn off your vehicle and allow the climate control system to cool. Gently locate the existing rear air conditioning trim panel in your climate control area. Position the carbon fibre trim against the original panel, aligning the clip points. Press firmly and evenly until all clips engage and the trim sits flush. Verify that all edges align with adjacent trim panels and dashboard surfaces. Step back and enjoy your new SVR-inspired interior detail. Important: Do not force clips. If resistance is felt, realign the trim and try again. Forcing may damage the clip points. Ready to Elevate Your Velar? This carbon fibre rear air conditioning trim is the detail that transforms a dashboard. Premium material, flawless fit, and the SVR look—all without complexity. Add it to your build today. Shop Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars — 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping — DHL, FedEx, UPS ✓ Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and designs are the property of their respective manufacturers. Product compatibility is based on original equipment specifications; fitment may vary based on vehicle condition and previous modifications.

Z-ART · Range Rover Evoque L538 · Front Grille Carbon Fibre Front Grille for Range Rover Evoque L538 (2012–2016) A direct-fit, race-inspired carbon fibre front grille that transforms the face of the Evoque with a sharper, more aggressive presence — built to last and precision-matched to the 2012–2016 generation. Range Rover Evoque L538 2012–2016 Carbon Fibre Racing Grille Body Kit Direct Fit UV Resistant 100% Brand New Z-ART Overview The Range Rover Evoque L538 already cuts a distinctive silhouette, but for owners who demand something more purposeful from the front end, the standard grille can feel understated. Whether you're running the original 2.0 Si4 petrol or the 2.2 TD4 diesel, the Evoque's nose is its calling card — and this carbon fibre front grille is designed to make it count. Crafted by Z-ART from high-grade carbon fibre composite, this racing-style front grille delivers genuine material authenticity alongside visual drama. The characteristic woven carbon weave pattern reads clearly at road speed, signalling a level of finish typically reserved for the motorsport paddock. Resistant to UV degradation, water, road salt, mild acids, oils and grease, it's built to hold its appearance through all-season use — not just summer show events. Every unit is gel-coated and individually inspected before despatch, ensuring the surface quality matches the quality of the underlying material. For Evoque owners who take pride in their vehicle's detail, this is the front-end upgrade that rewards closer inspection every time. What's Included 🔲 Carbon Fibre Front Grille Full replacement grille unit, ready to install 🔩 Mounting Hardware OEM-compatible fixings for secure installation 📋 Installation Guide Step-by-step reference included 🛡️ Protective Packaging Foam-lined secure outer packaging Product Highlights Genuine carbon fibre composite construction with visible 2×2 twill weave Direct replacement fit — engineered specifically for Evoque L538 2012–2016 Lightweight material reduces front-end mass versus OEM plastic unit Gel-coated finish for a high-gloss, showroom-ready surface appearance Resistant to UV, water, road salt, grease, oil and mild acid exposure 100% brand new — not reconditioned or refurbished Race-inspired design with aggressive aperture styling Individually inspected and quality-checked before shipping No drilling or permanent modifications required for installation CE certified — meets external testing and quality standards Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 (1st Gen) 2012–2016 Direct Fit Range Rover Evoque L538 (Facelift) 2016–2018 Verify Before Order Range Rover Evoque L551 (2nd Gen) 2019–Present Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible If your Evoque falls within the 2016 facelift window, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering to confirm compatibility with your specific VIN. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal tools, screwdriver set Ensure the vehicle is parked on a flat surface with the engine off and fully cooled before beginning work. Using trim removal tools, carefully disengage the front bumper clips and release the upper grille surround from the lower bumper assembly. Locate and remove all OEM grille retaining screws or push-pin fasteners — typically found along the top edge and lower mounting points. With a second pair of hands, gently pull the factory grille forward and away from the bumper opening, disconnecting any ambient sensor or camera wiring harness clips if present. Offer up the new carbon fibre grille into the aperture and confirm the mounting points align correctly before pressing into position. Reattach all mounting hardware, reconnect any wiring harnesses, and press the surround back into place until all clips seat firmly. Step back and visually inspect alignment from 3–4 metres. Minor adjustments can be made before final tightening. ⚠ Note: If your Evoque is fitted with a front-facing camera or parking sensors integrated into the grille area, ensure all connectors are fully reseated before driving. We recommend a professional installation if you are not confident working around front bumper assemblies. Victorious Automotive accepts no liability for damage arising from improper installation. Upgrade Your Evoque Today Browse our full Range Rover Evoque L538 accessory collection for interior, exterior and protection upgrades — all curated specifically for your generation of Evoque. Shop Evoque L538 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for fitment identification purposes. Z-ART is the manufacturer of this product. Always verify compatibility with your specific vehicle before installation.