Best selling products

Victorious Automotive · Toyota LC250 · Interior Accessories Armrest Box Compartment — 2024 Toyota Land Cruiser 250 Prado LC250 A precision-engineered storage compartment that integrates seamlessly into the LC250's centre console armrest, expanding usable cabin space without compromising the factory interior. LC250 2024 Land Cruiser 250 ABS Plastic Direct Fit No Drilling Required Interior Storage Fridge Compatible Option OEM Style Overview The 2024 Toyota Land Cruiser 250 Prado is engineered for those who demand capability and refinement in equal measure. Its interior reflects that philosophy — structured, purposeful, and thoughtfully laid out. However, like most factory cabins, the centre console armrest box leaves practical storage potential untapped, particularly for owners who spend extended time on the road or trail. This armrest box compartment is built specifically for the LC250 platform, slotting directly into the existing armrest cavity with no modification to your vehicle's structure. Moulded from high-quality ABS plastic to 1:1 factory dimensions, it adds a dedicated sub-compartment beneath the lid without affecting the armrest's original functionality — the lid still opens and closes exactly as intended. Whether you're organising daily carry items, cables, or small valuables, this piece does exactly what good interior accessories should: it works invisibly, looks factory-correct, and makes every journey feel more considered. Available in a standard configuration or with refrigeration compatibility for those running an integrated cooling unit in the console. What's Included 📦 Armrest Box Compartment 1x unit, precision moulded for the 2024 LC250 🔩 Mounting Hardware All required clips and fixings included 📋 Installation Guide Step-by-step instructions available on request Product Highlights Precision moulded to exact 1:1 LC250 armrest dimensions for a flawless factory fit High-quality ABS plastic construction for long-term rigidity and durability Seamlessly matches the LC250 interior aesthetic — indistinguishable from OEM Adds dedicated sub-compartment storage without altering armrest lid operation Available with refrigeration compatibility for integrated console cooling setups No permanent modification or drilling required for installation Resistant to UV fading, temperature extremes, and daily wear Easily removable and fully reversible — factory interior preserved Suitable for both left-hand and right-hand drive LC250 variants (confirm at checkout) Designed and validated specifically for the 2024 model year build Compatibility Vehicle Model Year Trim / Variant Fitment Toyota Land Cruiser 250 Prado (LC250) 2024 All Trims Direct Fit Toyota Land Cruiser 250 Prado (LC250) 2025 All Trims (verify console spec) Direct Fit Toyota Land Cruiser 300 (LC300) 2022–2025 All Trims Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Trims Not Compatible Toyota 4Runner / Fortuner Any All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None Open the existing centre console armrest lid fully and locate the inner cavity floor panel. Remove any existing liner or mat from the bottom of the armrest box if present. Align the new compartment unit with the cavity, ensuring the sub-compartment orientation matches your selected configuration (standard or fridge-compatible). Press the unit firmly into place — integrated clips should engage with an audible click against the factory mounting points. Open and close the armrest lid several times to confirm unobstructed operation and verify the compartment sits flush at all edges. If opting for the refrigeration-compatible variant, connect to your console cooling unit per the manufacturer's instructions before securing the compartment fully. ⚠ Important: Confirm your exact 2024 LC250 console specification before ordering — particularly if your vehicle is optioned with a factory refrigerated compartment, as this may affect which variant is required. Contact us at +44 203 943 9919 if unsure. Upgrade Your LC250 Interior Today Small details define a great cabin. This armrest compartment is the kind of thoughtful addition that LC250 owners notice every single drive. Order today with worldwide DHL, FedEx, UPS, and TNT shipping — and save on your next upgrade. Shop at Victorious Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Trim Upgraded Interior Loudspeaker Cover for 2024 Toyota Land Cruiser 250 (LC250) A precision-fit stainless steel speaker cover that refines the cabin aesthetic of the LC250 while protecting the factory door panel beneath. LC250 2024 Stainless Steel Direct Fit No Tools Required Black & Silver Interior Trim Adhesive Install Overview The 2024 Toyota Land Cruiser 250 is a machine built on decades of legend — rugged enough to traverse the world's harshest terrain, yet refined enough to demand a premium interior worthy of its reputation. Owners who live with the LC250 daily know that the details matter: every surface, every finish, every panel tells a story about intent and quality. This upgraded loudspeaker cover is designed specifically for the LC250's door trim architecture, delivering a seamless integration that looks factory-correct from every angle. Crafted from high-grade stainless steel and available in a choice of gloss black or brushed silver, the cover replaces the visual monotony of the OEM grille with a sculpted, upmarket finish that genuinely elevates the feel of the cabin. Beyond aesthetics, the cover serves a practical purpose — shielding the original factory panel from incidental contact, moisture ingress, and the inevitable wear that comes with daily use. Installation requires no specialist tools and no permanent modification to your vehicle. If you're curating the interior of your LC250 with the same attention you give to its capability, this cover is a natural addition. What's Included 🔊 Loudspeaker Cover × 1 Precision-fit for 2024 LC250 door trim 🧲 Pre-Applied Adhesive Industrial-grade 3M-style backing tape 📄 Installation Guide Step-by-step printed instructions included 🧤 Protective Packaging Foam-lined to prevent transit damage Product Highlights Precision-engineered fit for the 2024 Toyota Land Cruiser 250 LC250 Premium stainless steel construction — resistant to corrosion and warping Available in gloss black and brushed silver to match your interior trim Adhesive installation — no drilling, cutting or specialist tools required Protects the factory door panel from everyday wear and contact damage Seamless OEM-style fitment — sits flush with surrounding trim panels Maintains full acoustic performance — does not obstruct speaker output Reversible installation — removable without damage to original surfaces Easy single-person install completable in under 15 minutes per cover Elevates cabin sophistication without permanent modification to the vehicle Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser 250 (LC250) 2024 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Variants Not Compatible Toyota Land Cruiser 200 (LC200) 2007–2021 All Variants Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with a clean, dry interior — ensure the target door panel area is free from dust, oils, and moisture for maximum adhesive performance. Hold the loudspeaker cover up to the door panel and confirm alignment with the factory speaker grille before committing to installation. Peel back the protective film from the pre-applied adhesive tape on the reverse of the cover, taking care not to touch the adhesive surface. Press the cover firmly into position, applying steady even pressure across the entire surface for a minimum of 30 seconds to ensure a secure bond. Allow the adhesive to cure at room temperature for at least 1 hour before exposing the panel to direct sunlight or moisture. ⚠ Important: Clean the panel with an isopropyl alcohol wipe prior to installation. Do not install in temperatures below 10°C (50°F) as adhesive performance may be reduced. Ensure the vehicle has been parked and the panel is at ambient temperature before beginning. Upgrade Your LC250 Interior Today Small details define great interiors. This loudspeaker cover is one of the simplest, most impactful upgrades you can make to the cabin of your 2024 Land Cruiser 250 — and it ships worldwide via DHL, FedEx, UPS, and TNT. Shop All LC250 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL & FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Toyota Land Cruiser 250 · Exterior Styling Door Handle Decoration Covers – Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Precision-moulded ABS door handle covers that instantly elevate the exterior profile of the LC250, available in three premium finishes for a factory-integrated look. LC250 Prado 2024–2025 ABS Material Matte Black Bright Black Fibre Pattern No-Drill Fit Exterior Styling Direct Fit Set of 4 Overview The Toyota Land Cruiser 250 — known globally as the Prado LC250 — represents one of the most capable and refined SUVs available today. With its contemporary exterior language and premium stance, the LC250 attracts owners who demand both rugged performance and refined aesthetics. Every detail of the vehicle's exterior contributes to that commanding presence, and the door handles are no exception. These door handle decoration covers are engineered specifically for the 2024 and 2025 Land Cruiser 250, ensuring a precise, gap-free fit that looks and feels as though it came directly from the factory. Offered in Matte Black, Bright Black, and Carbon Fibre Pattern, each finish has been developed to complement the LC250's body lines and existing trim choices — whether your vehicle runs a dark or light exterior colour palette. Constructed from high-grade ABS polymer, these covers provide genuine protection against stone chips, scratches, and UV degradation to the original handle surface, while simultaneously adding a distinguished, customised character to your LC250's exterior. Installation requires no drilling, no specialist tools, and no permanent modification — simply a clean surface and a steady hand. What's Included 🚪 Door Handle Cover Set Full set covering all four door handles 🔧 Adhesive Tape Pre-Applied 3M-grade backing tape for secure bonding 📋 Installation Guide Step-by-step fitting instructions included 🧤 Cleaning Prep Cloth For surface preparation prior to fitting Product Highlights Custom-designed exclusively for the Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Available in Matte Black, Bright Black, and Carbon Fibre Pattern finishes Premium ABS construction — resistant to impact, UV fading, and weathering Full set of four covers for a consistent, cohesive exterior appearance No drilling, cutting, or permanent modification required for installation Pre-applied high-bond adhesive tape ensures a secure, long-lasting fit Protects original door handles from stone chips, surface scratches, and wear Precisely contoured to follow the LC250's door handle profile without gaps Lightweight construction — no added stress on door handle mechanism Reversible fitment — covers can be removed without damaging factory paintwork Compatibility Vehicle Code Year Range Fit Toyota Land Cruiser 250 (Prado) LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Prado 150 Series J150 2009–2023 Not Compatible Toyota Hilux / 4Runner — All Years Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 20–30 minutes  |  🔩 Tools Required: None Thoroughly clean the door handle area with the included prep cloth or an isopropyl alcohol wipe, removing all dirt, grease, wax, and moisture. Allow to dry completely before proceeding. Test-fit each cover against its corresponding door handle without removing the adhesive backing. Confirm alignment and orientation before committing to fitment. Peel back a small portion of the adhesive protective liner on the first cover. Carefully align the cover to the handle, pressing the exposed adhesive section into place first to anchor positioning. Once aligned, gradually peel away the remaining liner while applying firm, even pressure across the entire cover surface to eliminate air pockets and ensure full contact. Repeat for all remaining covers. Apply sustained hand pressure for 30–60 seconds on each cover after fitting to activate the adhesive bond. Allow a minimum of 24 hours before exposing the vehicle to rain, car wash, or extreme temperatures to allow the adhesive to cure fully. ⚠ Important: Do not attempt installation in cold or wet conditions — adhesive performance is significantly reduced below 10°C or on damp surfaces. Ensure the vehicle has not been recently waxed or treated with silicone-based products in the handle area, as these will prevent proper adhesion. Refine Every Detail of Your LC250 At Victorious Automotive, we believe the finest vehicles deserve equally considered accessories. These door handle covers are a small change that makes an immediate, visible difference — and that's exactly the kind of upgrade we specialise in. Free worldwide shipping via DHL, FedEx, UPS, and TNT. Backed by our 30-day money-back guarantee and 4.9-star rating across 12,300+ verified reviews. Shop LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product compatibility identification.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Trim Cigarette Lighter Panel Decoration Cover – Toyota Land Cruiser 250 / Prado 2024 (LC250) A precision-fit dashboard trim cover that instantly elevates the LC250's centre console aesthetic — available in Silver and Fibre Pattern finishes with zero-drill paste installation. LC250 2024 Land Cruiser 250 Prado 1958 ABS Plastic LHD Only Paste Installation Silver Finish Fibre Pattern Interior Trim Scratch Protection Overview The Toyota Land Cruiser 250 — also sold in certain markets as the Prado under the 1958 heritage nameplate — represents a significant evolution in Land Cruiser design. Its interior takes a noticeably more refined approach than its predecessor, with cleaner dashboard lines and a greater emphasis on tactile material quality. As owners of these vehicles will know, the small details around the centre console are precisely where aftermarket finishing pieces make the most visible difference. This Cigarette Lighter Panel Decoration Cover is designed specifically for the 2024 LC250 dashboard architecture, slotting cleanly over the factory lighter panel to deliver an immediate visual upgrade. Available in two finishes — a polished Silver and a textured Fibre Pattern — it allows you to personalise the interior towards either a contemporary sport aesthetic or a carbon-inspired look, depending on your preference. Constructed from high-grade ABS plastic, the cover is engineered to resist the daily wear that centre console panels are routinely subjected to — from incidental contact to UV exposure. Installation requires no tools and no permanent modifications: the panel simply adheres in place using the included adhesive backing, making it as easy to apply as it is to remove cleanly should you ever wish to do so. What's Included 🪟 Panel Decoration Cover × 1 Pre-cut ABS trim piece, ready to install 🔲 Adhesive Backing Pre-applied 3M-style tape for secure bonding 🧽 Cleaning Wipe Surface prep wipe included for clean adhesion 📄 Installation Guide Step-by-step fitment reference sheet Product Highlights Precision-engineered fit for the 2024 Toyota Land Cruiser 250 / Prado dashboard Available in Silver and Fibre Pattern — two distinct interior aesthetics High-grade ABS plastic construction for long-term durability Protects the original factory panel from scratches and surface wear Paste-fit installation — no drilling, no cutting, no permanent modification Adhesive bond strong enough to hold securely through temperature variation Low-profile design maintains the factory dashboard depth and clearance UV-resistant finish to prevent fading or discolouration over time Reversible — can be removed cleanly without damaging the OEM panel Compatible with Left Hand Drive (LHD) LC250 / Prado 1958 models only Compatibility Vehicle Year Drive Type Trim Level Fitment Toyota Land Cruiser 250 (LC250) 2024 Left Hand Drive (LHD) All Trims Direct Fit Toyota Land Cruiser Prado 1958 2024 Left Hand Drive (LHD) All Trims Direct Fit Toyota Land Cruiser 250 (LC250) 2024 Right Hand Drive (RHD) All Trims Not Compatible Toyota Land Cruiser Prado 1958 2024 Right Hand Drive (RHD) All Trims Not Compatible Toyota Land Cruiser 300 (LC300) 2021–2024 LHD / RHD All Trims Not Compatible Toyota Land Cruiser 200 (LC200) All Years LHD / RHD All Trims Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🔧 Difficulty: Beginner Begin with the vehicle off and the interior at room temperature — cold panels or adhesive can reduce initial bond strength. Use the included cleaning wipe to thoroughly degrease the cigarette lighter panel surround. Allow the surface to dry fully for 2–3 minutes. Test-fit the decoration cover against the panel without removing the adhesive backing to confirm alignment and check clearances. Peel the adhesive backing from the cover, aligning carefully to the panel edges before making contact — reposition is limited once adhesive touches the surface. Apply firm, even pressure across the entire cover surface for 30–60 seconds to activate the adhesive bond. Allow 12–24 hours before exposing the panel to heat, moisture, or significant vibration for full cure strength. ⚠ Important: This cover is designed exclusively for Left Hand Drive (LHD) LC250 and Prado 1958 models. Attempting fitment on a Right Hand Drive vehicle will result in incorrect panel alignment. If you are unsure of your vehicle's drive configuration, please contact us before ordering on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your LC250 Interior Today Small details define great interiors. This panel cover is a straightforward, no-compromise way to bring a more premium feel to your Land Cruiser 250's dashboard — installed in under 15 minutes, no tools required. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Toyota Motor Corporation, Toyota Land Cruiser, or any of their subsidiaries or partners. All vehicle names, model codes, and designations are used solely for fitment reference purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Toyota LC250 / Prado · Interior Trim Memory Seat Button Decoration Cover — Toyota Land Cruiser 250 / Prado LC250 2024 A precision-fit ABS trim cover that upgrades the memory seat button panel on the 2024 Land Cruiser 250 and Prado LC250 — adding a refined, layered finish to one of the cabin's most-used control areas. LC250 Prado 2024 ABS Material Silver Finish Fiber Pattern No-Drill Install Interior Trim Scratch Protection Direct Fit Overview The 2024 Toyota Land Cruiser 250 — sold in select markets as the Prado LC250 — represents a bold return to form for the Land Cruiser nameplate. Its interior strikes a balance between functional ruggedness and modern refinement, and for owners looking to push that refinement further, the details matter. The memory seat control area is one of those overlooked zones that, once upgraded, immediately elevates the feel of the entire centre console region. This Memory Seat Button Decoration Cover is engineered to sit flush over the factory memory seat panel, delivering a cleaner, more premium look without any permanent modification. Available in Silver or Fiber Pattern, both finishes are designed to complement the LC250's interior palette — whether your cabin runs darker tones or lighter trims. The ABS construction ensures the cover holds its shape and colour under daily use and temperature fluctuation. Installation is entirely adhesive-based. No tools, no drilling, no removal of existing panels. The cover adheres directly to the factory surface and sits seamlessly within the surrounding trim — giving the impression of a factory-spec upgrade rather than an afterthought addition. For those who use the memory seat function regularly, this cover also acts as a quiet layer of protection against fingernail scuffs and long-term wear to the original surround. What's Included 🪄 Decoration Cover × 1 Memory seat button panel trim, ABS construction 🔧 Pre-Applied Adhesive 3M-style backing tape for secure, clean bonding 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut for exact fitment on 2024 LC250 / Prado memory seat panel Available in Silver or Fiber Pattern to match interior trim styles Durable ABS material resists heat, UV, and daily contact wear Adhesive-backed installation — no tools or modifications needed Protects factory panel surface from scratches and fingertip scuffing Slim profile — does not obstruct button function or tactile feedback Colour-stable finish — will not fade or peel under normal cabin conditions Elevates interior grade with a factory-matching aesthetic Fully reversible — can be removed without damage to original trim Direct replacement aesthetic for a clean, integrated cabin appearance Compatibility Vehicle Code Year Fitment Toyota Land Cruiser 250 LC250 2024 Direct Fit Toyota Land Cruiser Prado (LC250) LC250 2024 Direct Fit Toyota Land Cruiser 300 LC300 2021–2024 Not Compatible Toyota Land Cruiser Prado 150 LC150 2009–2023 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Thoroughly clean the memory seat button panel surround with an alcohol wipe or lint-free cloth. Ensure the surface is completely dry before proceeding — any moisture or dust will compromise adhesion. Remove the protective backing from the pre-applied adhesive on the rear of the decoration cover, taking care not to touch the adhesive surface. Align the cover carefully over the factory memory seat button panel. Use the button cutouts as reference points to confirm precise positioning before committing. Once aligned, apply firm, even pressure across the entire surface of the cover for 20–30 seconds to activate the adhesive bond. Allow the adhesive to fully cure for at least 30 minutes before use — avoid pressing the memory seat buttons repeatedly during this period. ⚠ Note: Do not attempt installation in cold ambient temperatures below 10°C, as adhesive performance will be significantly reduced. If the cover is to be removed, use a plastic trim tool to gently lift one edge and peel slowly to avoid stress marks on the factory panel surface. Finish Your LC250 Interior This cover is part of a broader range of interior trim upgrades available for the 2024 Land Cruiser 250. Small details compound — explore the full LC250 interior collection to build a cabin that feels as considered as the vehicle deserves. Shop LC250 Interior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify compatibility with your specific vehicle variant and build date before purchase.

Toyota · Land Cruiser 250 / Prado · Interior Trim Door Handle Inner Bowl Decoration — Toyota Land Cruiser 250 / Prado LC250 (2024–2025) Precision-cut stainless steel door bowl covers that protect your LC250's interior door panels from daily scratches while adding a polished, premium finish to the cabin. LC250 2024–2025 Land Cruiser 250 Prado Stainless Steel Silver / Black / Carbon Fibre Interior Trim No-Drill Fit Direct Adhesive Install Overview The Toyota Land Cruiser 250 — also known as the Prado in many markets — represents Toyota's most capable and refined SUV platform to date. Introduced for the 2024 model year, the LC250 brought a dramatically improved interior that raises expectations for fit, finish, and material quality throughout the cabin. Owners who invest in this vehicle inevitably want every detail of that interior to reflect the same level of care and intention as the vehicle itself. These door handle inner bowl decoration covers are engineered specifically for the LC250 platform. Crafted from durable stainless steel, they sit flush within the recessed door pull area of all four doors, providing a visually cohesive upgrade that complements the existing interior design language. Available in three finishes — Silver, Black, and a Carbon Fibre-style pattern — they allow you to tailor the aesthetic to your own taste, whether your build is understated or fully detailed. Beyond aesthetics, these covers serve a genuine protective function. The door bowl area is one of the highest-contact zones in any vehicle cabin — rings, keys, and fingernails inevitably leave marks on bare plastic over time. Installing these covers at the earliest opportunity preserves the original panels in pristine condition and eliminates visible wear before it has a chance to accumulate. What's Included 🚪 Door Bowl Cover Set Full set of 4 covers — front and rear doors 🔧 Pre-Applied 3M Adhesive Factory-applied pads on each cover for secure bonding 🧹 Surface Prep Wipe Alcohol cleaning wipe included for prep 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision cut to match the exact contour of LC250 door bowls Available in Silver, Black, and Carbon Fibre-style finishes Durable stainless steel construction resists corrosion and wear Protects factory door panels from rings, keys, and daily contact No drilling or vehicle modification required for installation Pre-applied 3M-grade adhesive backing for a permanent, secure fit Adds a premium, detailed appearance to the interior cabin Compatible with all trim levels of the 2024–2025 LC250 / Prado Full set of four covers included — all doors addressed in one kit Easily removed and replaced without damage to original surfaces Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser Prado (250 Series) LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 Series LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 Series LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 Series LC150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 minutes  |  🔩 Tools Required: None Begin with a clean, dry vehicle interior. Ensure the door bowl areas are free from dust, moisture, or residue before proceeding. Use the included alcohol prep wipe to thoroughly clean each door bowl surface. Allow to dry completely — approximately 2–3 minutes per panel. Test-fit each cover in position without removing the adhesive backing to confirm correct placement and alignment before committing. Peel back the 3M adhesive protective film from the rear of the first cover, aligning it carefully with the door bowl recess. Press firmly and evenly across the full surface of each cover for 30–60 seconds to ensure full contact and adhesion. Repeat for all four doors. Allow the adhesive to fully cure for 24 hours before heavy use for best long-term bond strength. ⚠ Note: Do not install in temperatures below 10°C (50°F) as this can significantly reduce adhesive performance. For the strongest and most durable bond, allow the vehicle interior to reach room temperature prior to fitting. If unsure, professional installation is recommended. Finish Your LC250 Interior Small details define a truly considered build. Paired with matching interior trim upgrades, these door bowl covers complete the look of a well-appointed Land Cruiser 250 cabin. Use code below for 20% off when you pick up two or more items. Shop LC250 Interior Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only. Always verify compatibility with your specific vehicle specification before purchase. If in doubt, contact our team on +44 203 943 9919.

Victorious Automotive · Toyota LC250 · Exterior Styling Upgraded Rear Spoiler for Toyota Land Cruiser 250 Prado LC250 2024–2025 A precision-engineered ABS spoiler that sharpens the roofline profile of the LC250, delivering a purposeful aesthetic upgrade with a factory-finish appearance. LC250 2024–2025 High-Grade ABS Direct Fit Adhesive Mount White / Black Exterior Styling Prado LC250 Overview The Toyota Land Cruiser 250 — sold in many markets as the Prado LC250 — represents a bold new generation of the iconic nameplate, combining modern SUV refinement with genuine off-road credibility. Its angular roofline and upright tailgate lend themselves naturally to a rear spoiler upgrade, where even a subtle addition makes a measurable visual difference from every angle. This upgraded spoiler has been designed from the ground up with the LC250's exact roofline geometry in mind. Unlike generic aftermarket alternatives, the contours follow the factory body curvature precisely — eliminating unsightly gaps or proud edges that can undermine an otherwise clean build. Manufactured from high-grade ABS thermoplastic, the spoiler is lightweight without compromise on structural rigidity, resisting warping, UV degradation, and the expansion cycles that come with daily outdoor use. Available in both Gloss Black and White, the finish is consistent and deep — ready for direct fitment or as a base for a professional colour-match paint job to your LC250's OEM code. Whether you're building an expedition-ready overlander or simply refining your daily driver, this spoiler adds a cohesive finishing touch that looks deliberate, not bolted-on. What's Included 🔲 Rear Spoiler Pre-formed ABS unit, vehicle-specific profile 🩹 3M Adhesive Tape Pre-cut, high-bond automotive-grade strips 📋 Fitment Guide Step-by-step installation instructions Product Highlights Engineered exclusively for the Toyota Land Cruiser 250 / Prado LC250 body shell High-grade ABS construction — lightweight, rigid, and UV-resistant Precision contour-matched to the LC250 roofline for a seamless fit Available in Gloss White and Gloss Black — both paint-ready No drilling required — clean adhesive-tape installation Factory-style appearance with no exposed fixings or visible hardware Resistant to temperature cycling, road vibration, and carwash chemicals Adds visual length and presence to the LC250's tailgate profile Ideal base for OEM colour-match respray for a fully integrated look Direct replacement or brand-new addition — suits stock and modified builds Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Prado LC250 LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Prado 150 Series J150 2009–2023 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 30–45 Minutes  ·  🔧 Tools Required: None Thoroughly clean the spoiler mounting surface on the tailgate with isopropyl alcohol (IPA) — remove all wax, polish residue, and dust. Allow to dry fully. Dry-fit the spoiler against the roofline to confirm alignment and positioning before committing to adhesive placement. Peel the backing from the pre-cut 3M adhesive strips and apply evenly to the underside mounting flange of the spoiler. Carefully align the spoiler to the tailgate surface — work from the centre outward to avoid air pockets or misalignment. Apply firm, even pressure across the full length of the spoiler and hold for 60 seconds to activate the adhesive bond. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain or high-pressure washing. ⚠ Important: Do not attempt installation in temperatures below 10°C (50°F) — cold surfaces significantly reduce adhesive bond strength. For a permanent finish, a professional installer can supplement the adhesive with automotive-grade panel adhesive or colour-matched sealant along the edges. Finish Your LC250 the Right Way At Victorious Automotive, every accessory we carry is selected for owners who refuse to settle. Whether you're building the ultimate overland rig or perfecting your daily drive, we've got the parts to get it right. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation, Land Cruiser, or any associated OEM brand. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Protection Anti-Slip Interior Mats – Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precisely formed anti-slip mats that protect every surface of your LC250's interior, preventing items from shifting, reducing cabin noise, and preserving the original trim in immaculate condition. LC250 Prado 2024–2025 Anti-Slip Interior Protection Custom Fit No Drilling Black / Red / White Luminous Direct Fit Overview The Toyota Land Cruiser 250 — sold globally as the Prado LC250 — represents a new generation of refined off-road capability, blending premium interior appointments with serious go-anywhere credentials. Owners invest considerably in this vehicle, and the factory trim deserves protection that matches its quality from the moment it leaves the showroom floor. These anti-slip interior mats are engineered specifically for the 2024 and 2025 Land Cruiser 250, providing custom-fit coverage across the interior surfaces most vulnerable to everyday wear, scratching, and item movement. Whether it's loose items sliding across the centre console during a trail run or everyday debris accumulating in storage recesses, these mats step in as a silent layer of protection that is both functional and discreet. The textured anti-slip surface grips items in place while the mat itself stays anchored to the factory panel — no adhesives, no permanent fixings, no risk of damage. Available in Black, Red, and White Luminous, there is an option to blend seamlessly with the standard interior or introduce a subtle accent of colour for those who prefer a more personalised cabin aesthetic. What's Included 🛡️ Anti-Slip Mat Set Full set of mats for designated interior areas 📐 Custom-Cut Profile Pre-shaped to fit LC250 interior recesses precisely 🎨 Choice of Colour Black, Red, or White Luminous finish 📄 Fitment Guide Placement reference included for easy installation Product Highlights Precision-cut to match the exact interior profile of the Land Cruiser 250 (LC250) 2024–2025 Textured anti-slip surface prevents items from sliding during cornering, acceleration, or off-road use Protects original factory panels from scratches, scuffs, and surface wear Reduces unwanted cabin rattles caused by loose items shifting in storage areas No adhesives or permanent fixings required — fully reversible installation Easy-clean surface resists dust, dirt, and moisture — wipes clean in seconds Lightweight and low-profile — virtually invisible once placed in position Available in three colour options: Black, Red, and White Luminous Durable material construction designed for long-term use without degradation Maintains resale value by preserving the condition of original interior trim surfaces Compatibility Vehicle Model Code Year Range Fit Toyota Land Cruiser 250 Prado LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Toyota Fortuner / 4Runner — All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Remove any existing items or debris from the interior storage areas, door pockets, and console surfaces where the mats will be placed. Dry-fit each mat against its designated interior area to confirm correct orientation and profile alignment before final placement. Press each mat firmly and evenly into position, ensuring all edges sit flush against the surrounding factory trim. Place a small item on each mat to confirm anti-slip grip is active and the mat remains stationary on the panel below. To remove for cleaning, simply lift from any corner — no adhesive residue, no marks left on the original surface. Note: These mats are designed for placement in interior storage recesses and console areas only. Do not place under or over safety-critical components such as airbag panels, seat belt mechanisms, or pedal areas. Always ensure mats are correctly seated and do not obstruct vehicle operation. Protect Your LC250 From the Inside Out Small details define a well-kept interior. These anti-slip mats are the effortless upgrade your Land Cruiser 250 deserves — fitted in minutes, protective for years. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, affiliated with, endorsed by, or sponsored by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota LC250 · Exterior Accessories Fuel Tank Cap Decoration Cover – Carbon Fibre Pattern for 2024 Toyota Land Cruiser 250 Prado (LC250) A precision-fit ABS fuel cap cover with a carbon fibre pattern finish, engineered to elevate the exterior detail of the 2024 LC250 with zero modification required. LC250 2024 Carbon Fibre Pattern ABS Material Paste Fit Anti-Scratch Exterior Trim No Tools Required Overview The 2024 Toyota Land Cruiser 250 Prado is a thoroughly modern interpretation of a legendary nameplate — angular, purposeful, and built for those who demand both capability and refinement. It's a vehicle that rewards attention to detail, and nowhere is that more apparent than in the considered exterior styling Toyota has applied to the LC250 platform. This Fuel Tank Cap Decoration Cover is designed specifically for the LC250 to complement that aesthetic. Finished in a bold carbon fibre pattern, it replaces the understated look of the stock fuel cap surround with something more purposeful — a subtle upgrade that reads as entirely factory-spec once installed. The cover is moulded from high-quality ABS plastic, chosen for its rigidity, resistance to heat cycling, and long-term UV stability in exterior applications. What sets this cover apart is the engineering behind the fit. Rather than a generic aftermarket shell, this piece is developed using original vehicle dimensional data for the 2024 LC250, ensuring the adhesive mount aligns precisely with the fuel cap housing. Once applied, it sits flush, stays put, and doesn't interfere with cap access — exactly what a trim piece should do. What's Included 🔲 Fuel Cap Decoration Cover Carbon fibre pattern ABS, LC250-specific fitment 🔧 Pre-Applied Adhesive Tape High-bond 3M-style tape, ready to install 📄 Installation Guide Step-by-step fitment instructions included Product Highlights Precision-moulded specifically for the 2024 Toyota LC250 fuel cap housing Carbon fibre pattern finish adds an assertive, modern exterior detail High-quality ABS construction resists heat, UV, and road vibration Anti-scratch surface coating maintains appearance over time Tool-free installation — paste-fit with pre-applied adhesive Flush fitment leaves no visible gaps or misalignment once applied Does not obstruct or impede fuel cap access in any way Developed from original LC250 vehicle data for dimensional accuracy Lightweight construction — no added stress to panel or housing Reversible upgrade — can be removed cleanly if required Compatibility Vehicle Code Year Range Fitment Toyota Land Cruiser 250 Prado LC250 2024 Direct Fit Toyota Land Cruiser 300 LC300 2021–2024 Not Compatible Toyota Land Cruiser 200 LC200 2007–2021 Not Compatible Toyota Land Cruiser 150 Prado LC150 2009–2023 Not Compatible Toyota Hilux Surf / 4Runner — All Years Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Park your LC250 and ensure the fuel cap area is cool to the touch and free from direct sunlight. Thoroughly clean the fuel cap housing panel with an isopropyl alcohol wipe to remove any wax, grease, or dust residue. Allow to dry completely. Test-fit the decoration cover over the fuel cap housing before removing the adhesive backing to confirm alignment. Peel the adhesive backing from the cover, align carefully with the housing edges, and press firmly into position. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Avoid washing the vehicle or exposing the area to water for at least 24 hours to allow the adhesive to fully cure. ⚠ Note: Do not attempt installation on a wet, cold, or wax-coated surface — adhesion will be significantly reduced. If the cover is being applied in temperatures below 10°C, warm the adhesive tape gently with a heat gun or hairdryer before fitting. Finish the Detail. Own the Look. Small upgrades make a lasting impression. This LC250 fuel cap cover is the kind of considered exterior touch that separates a standard build from one that's been genuinely thought through — and it takes less than 15 minutes to achieve. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Charging QC3.0 Quick Charger for 2024 Toyota Land Cruiser 250 (LC250) A factory-fit rapid charging solution purpose-built for the 2024 Land Cruiser 250 — keeping every device powered without compromise to interior aesthetics. LC250 QC3.0 2024 Land Cruiser 250 Fast Charging ABS Material Plug & Play Interior Accessory Lossless Fit Overview The 2024 Toyota Land Cruiser 250 represents a bold return to purpose-built off-road capability wrapped in a refined, feature-rich interior. Owners expect every component of the cabin to work as hard and as intelligently as the vehicle itself — and that same standard should apply to how you keep your devices charged and ready. This QC3.0 Quick Charger has been engineered specifically for the LC250's interior layout. Rather than relying on aftermarket workarounds or third-party adapters that disrupt the cabin's clean lines, this unit integrates directly into the vehicle's existing electrical architecture via a wiring harness dock. The result is a seamless, factory-look installation with none of the clutter typically associated with USB add-ons. Qualcomm Quick Charge 3.0 technology delivers up to 4x faster charging speeds compared to standard USB outputs — capable of charging a compatible device from 0 to 80% in under 35 minutes. Whether you're navigating long-haul overland routes or daily commutes, this charger ensures your devices never fall behind. What's Included ⚡ QC3.0 Quick Charger Unit Custom-fit for LC250 interior 🔌 Wiring Harness Dock Plug-and-play electrical connector 📄 Installation Guide Step-by-step fitting instructions Product Highlights Qualcomm QC3.0 certified rapid charging technology Up to 4x faster than standard USB charging outputs Designed exclusively for the 2024 Toyota Land Cruiser 250 Seamless factory-look integration — no drilling or cutting required Lossless installation via OEM-style wiring harness docking Premium ABS construction matched to LC250 interior trim quality Intelligent chip auto-identifies device for optimal charge speed Compatible with smartphones, tablets, and QC3.0 devices Maintains full interior aesthetics with zero visible modification Simple, reversible installation suitable for DIY fitment Compatibility Vehicle Year Trim / Variant Fitment Toyota Land Cruiser 250 (LC250) 2024 All Variants Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Variants Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Variants Not Compatible Toyota Land Cruiser Prado (150) All Years All Variants Not Compatible Toyota Hilux Surf / 4Runner All Years All Variants Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Ensure the vehicle ignition is fully off before beginning any installation work. Locate the existing USB or charging port housing in the LC250 centre console or dashboard trim panel relevant to your fitment point. Carefully remove the factory trim panel or port cover using a trim removal tool or your hands — no cutting or drilling is required. Disconnect the existing connector from the OEM port housing (if present) and connect the included wiring harness dock to the vehicle's factory wiring loom. Secure the QC3.0 charger unit into the housing aperture, ensuring the ABS surround clicks flush into the trim panel. Refit the trim panel and restore the ignition. Test the charger with a compatible QC3.0 device to confirm fast-charge activation. ⚠ Please Note: Verify your specific LC250 build date and trim specification before installation. If you are unsure about your vehicle's wiring configuration, professional installation by a qualified auto-electrician is recommended. Incorrect connection to vehicle electrics may void your vehicle warranty. Upgrade Your LC250 Interior Today Join over 12,300 verified customers who trust Victorious Automotive for precision-fit vehicle accessories. Every order ships worldwide via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment compatibility purposes.

Toyota · Land Cruiser 250 (Prado LC250) · Exterior Styling Front Fog Lamp Decoration Trim – Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precision-moulded ABS fog light surrounds that sharpen the LC250's front end with a refined, purposeful finish — available in Silver, Black, and Carbon Fibre Pattern. LC250 Prado 2024–2025 ABS Material Paste Installation Silver / Black / Fibre Pattern Exterior Trim No Drilling Required Overview The Toyota Land Cruiser 250 — also known as the Prado LC250 — represents a significant generational leap for the nameplate. Launched for the 2024 model year, it blends rugged off-road credibility with a cleaner, more upmarket exterior design language. Enthusiasts who invest in this platform understand that the details matter, and the front end is one of the most visually impactful areas of the vehicle. These front fog lamp decoration trims are purpose-designed to slot precisely around the LC250's factory fog light housings, adding a defined surround that elevates the overall aesthetic of the bumper. Whether you choose the understated Silver, the stealth-focused Black, or the sporty Carbon Fibre Pattern finish, each option is engineered from high-grade ABS plastic to ensure a consistent surface quality and long-term resistance to UV fade and general wear. The adhesive paste installation method means there is no need for drilling, cutting, or professional fitting. The trims follow the exact contour of the OEM fog lamp recess, resulting in a factory-integrated look that appears as though it shipped directly from Toyota's production line. A small but considered upgrade that meaningfully improves the perceived grade of your LC250's exterior. What's Included 🔲 Fog Lamp Decoration Trims Pair (left & right), pre-cut to OEM dimensions 🔧 Adhesive Tape Pre-Applied Strong automotive-grade 3M-style tape backing 🧴 Surface Prep Wipe Alcohol cleaning pad included for adhesion prep 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Designed exclusively for the Toyota Land Cruiser 250 / Prado LC250 Fits 2024 and 2025 model year vehicles Three finish options: Silver, Black, Carbon Fibre Pattern High-grade ABS construction for durability and weight efficiency Accurate OEM-matched dimensions for seamless panel alignment No drilling, cutting, or specialist tools required Adhesive paste installation — reversible and clean UV-resistant surface finish to prevent fading over time Instantly elevates the perceived grade of the front bumper area Sold as a complete pair — left and right covers included Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 / Prado LC250 2024 – 2025 Direct Fit Toyota Land Cruiser 300 LC300 2021 – 2025 Not Compatible Toyota Land Cruiser 200 LC200 2008 – 2021 Not Compatible Toyota Prado 150 Series J150 2009 – 2023 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Thoroughly clean the fog lamp surround area using the included alcohol prep wipe. Ensure the surface is completely dry before proceeding. Test-fit both trims dry (without removing the adhesive backing) to confirm alignment and orientation against the fog lamp housing. Starting with the driver's side, carefully peel back the adhesive tape liner and align the trim precisely to the fog lamp recess edge. Apply firm, even pressure across the full face of the trim for 30–60 seconds to activate the adhesive bond. Repeat the process for the passenger side trim, ensuring symmetry across both fog lamp surrounds. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing the trims to heavy moisture. Note: For best adhesion results, install in ambient temperatures above 10°C (50°F). Avoid installation in direct sunlight or on a hot vehicle surface, as this may affect the initial tape bond. Do not apply to surfaces that have been recently waxed or treated with a ceramic coating without first removing the product layer in the application area. Upgrade Your LC250's Front End A small investment that makes a visible difference. These fog lamp trims are one of the easiest, most cost-effective ways to sharpen the LC250's exterior presence — no tools, no professional fitting, no compromises. Shop All LC250 Exterior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Trim Air Conditioning Vent Decoration Cover for Toyota Land Cruiser 250 (2024–2025) A precision-fit AC vent trim overlay that elevates the interior finish of the LC250 — available in carbon fibre pattern and silver, with a no-drill paste installation that takes minutes. LC250 2024–2025 ABS Material Carbon Fibre Pattern Silver Finish Paste Fit Anti-Scratch Interior Trim Overview The Toyota Land Cruiser 250 represents a new chapter for one of the world's most respected off-road nameplates — combining rugged capability with a considerably more refined, technology-forward cabin. For owners who've invested in the LC250, the interior becomes a space worth perfecting, and it's often the smaller details that make the biggest impression. These AC vent decoration covers are designed specifically around the factory air outlet geometry of the 2024–2025 Land Cruiser 250. Manufactured from high-grade ABS with either a carbon fibre textured finish or a clean brushed silver option, each piece is modelled directly from OEM vent dimensions — meaning the fitment is tight, the alignment is precise, and the visual upgrade is immediately noticeable without looking aftermarket. The installation is entirely non-invasive, using a professional-grade adhesive paste method that leaves no marks and doesn't require any modification to the existing vent assembly. Airflow performance remains completely unaffected. Whether you're looking to match a wider interior styling theme or simply sharpen the factory look, these covers deliver exactly the right level of detail. What's Included 🌀 AC Vent Decoration Cover(s) Precision-fit overlay for LC250 factory air outlets 🧲 Pre-Applied Adhesive Factory-grade paste backing for secure fitment 📋 Installation Guide Step-by-step fitting reference included 📦 Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Engineered specifically for the Toyota Land Cruiser 250 (2024–2025) Available in carbon fibre texture pattern and silver finish High-grade ABS construction — rigid, lightweight, and durable OEM vent data used for precise dimensional accuracy Paste installation — no drilling, cutting, or tools required Does not obstruct or reduce airflow from factory outlets Scratch-resistant surface finish for lasting appearance Seamless integration with the LC250 factory dashboard aesthetic Residue-free removal if ever needed — vent stays undamaged Instantly elevates interior grade without permanent modification Compatibility Vehicle Generation / Code Year Range Fit Toyota Land Cruiser 250 LC250 2024–2025 Direct Fit Toyota Land Cruiser 300 LC300 / J300 2021–2025 Not Compatible Toyota Land Cruiser 200 LC200 / J200 2007–2021 Not Compatible Toyota Land Cruiser Prado J150 2009–2024 Not Compatible Toyota Hilux Surf / 4Runner N210 / N280 Various Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 10–20 Minutes  |  🔧 Tools Required: None Ensure the AC vent surfaces are completely clean, dry, and free of any dust, grease, or silicone residue. A 70% isopropyl alcohol wipe is recommended for best adhesion. Test-fit each decoration cover over the corresponding vent without removing the adhesive backing — confirm alignment and seating before committing. Peel the protective film from the adhesive backing carefully, taking care not to touch the adhesive surface with bare fingers. Position the cover precisely over the vent opening and press firmly from the centre outward, applying sustained pressure for 30–60 seconds per piece. Allow a minimum of 24 hours for the adhesive to fully cure before operating the air conditioning at high fan speeds. ⚠ Note: Do not install on textured, dirty, or freshly-conditioned surfaces. Avoid applying in temperatures below 10°C (50°F) as this may reduce initial adhesive effectiveness. If your vehicle has recently been detailed with interior protectant products, ensure the vent area is thoroughly cleaned with IPA before fitting. Finishing Touches, Done Right Every detail inside your Land Cruiser 250 is a reflection of how you approach the vehicle. These vent covers are a small change with a noticeable result — and with worldwide shipping via DHL, FedEx, UPS, and TNT, yours can be on the way today. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Toyota Land Cruiser 250 · Interior Protection TPE Floor Mats & Trunk Mats — Toyota Land Cruiser 250 (LC250) 2024–2025 Precision-fit TPE floor and trunk protection engineered specifically for the Toyota Land Cruiser 250, combining waterproof durability with a finish that keeps the LC250's interior looking factory-fresh. LC250 2024–2025 TPE Material Waterproof Direct Fit Floor Mats Trunk Mat Easy Clean Overview The Toyota Land Cruiser 250 represents a generational leap for one of the world's most respected off-road platforms. Whether you're navigating urban commutes or tackling demanding terrain, the interior of the LC250 sees significant daily wear — mud, water, sand, and general debris accumulate quickly on the factory carpet. Protecting that investment from day one isn't optional; it's essential. These floor mats and trunk mats are manufactured from high-grade TPE (thermoplastic elastomer), a material chosen specifically for its resilience, flexibility in cold temperatures, and near-zero odour characteristics. Unlike cheaper rubber alternatives, TPE mats maintain their shape and grip without cracking, warping, or emitting harsh chemical smells — qualities that matter in a premium cabin environment like the LC250's. Each set is developed to a direct-fit specification for the 2024 and 2025 Land Cruiser 250, meaning contoured edges, raised lip channels, and anchor points that align precisely with the factory floor. The result is complete coverage that moves with the vehicle, not against it — protecting the OEM carpet and keeping every load-area surface in showroom condition. What's Included 🟦 Front Floor Mats Driver and passenger side, contoured TPE fit 🟩 Rear Floor Mats Second-row coverage, raised lip surround 🟫 Trunk / Boot Mat Full load area coverage for the LC250 boot 📎 Retention Clips Anti-slip anchors compatible with OEM fixings Product Highlights Direct-fit design for Toyota Land Cruiser 250 2024–2025 Premium TPE material — flexible, odourless, and durable 100% waterproof — channels liquid away from OEM carpet Raised lip perimeter contains spills and debris effectively Protects and preserves the original factory carpet Elevates the interior grade and overall cabin presentation Anti-slip backing — stays firmly in place under load Easy to remove, rinse, and reinstall in minutes Resistant to UV fading, cracking, and extreme temperatures Full set includes front, rear, and trunk coverage Compatibility Vehicle Year Variant Fitment Toyota Land Cruiser 250 (LC250) 2024 All Trim Levels Direct Fit Toyota Land Cruiser 250 (LC250) 2025 All Trim Levels Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Not Compatible Toyota Land Cruiser Prado All Years All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Remove the existing factory floor mats or any aftermarket mats currently installed in the vehicle. Vacuum or clean the OEM carpet surface to remove any loose debris before fitting the new mats. Place the front mats into position, aligning the retention eyelet with the OEM anchor point on the driver and passenger side. Press firmly to engage the clip. Lay the rear floor mats into position. The contoured edges should sit flush against the centre console and door sills — no trimming required. Open the boot and fit the trunk mat, aligning it to the load floor contours. Press edges down to ensure a snug fit. Confirm all mats are seated correctly and do not interfere with pedal travel before driving. Important: Always verify that driver-side floor mats are securely anchored and do not restrict accelerator, brake, or clutch pedal movement. Check fitment after the first drive and re-seat if any movement is detected. Protect Your LC250 From the Ground Up The Land Cruiser 250 deserves protection that matches its capability and refinement. This direct-fit TPE mat set is one of the most straightforward upgrades you can make — and one of the most appreciated every single day. Shop LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Compatibility is based on available specification data — please verify your exact variant before ordering or contact our team for guidance.

Victorious Automotive · Toyota LC250 · Interior Protection Wireless Charger Silicone Protection Pad – Toyota Land Cruiser 250 (LC250) 2024 A precision-cut silicone pad that protects your LC250's centre console wireless charging surface from scratches, rattles and everyday wear — drop it in, done. LC250 2024 Land Cruiser 250 Silicone Centre Console Wireless Charging Anti-Rattle Black No Adhesive Easy Clean Overview The 2024 Toyota Land Cruiser 250 is one of the most anticipated vehicles of the decade — a return to rugged, go-anywhere capability paired with a genuinely premium interior. The LC250's centre console is a key part of that interior experience, and the built-in wireless charging pad is one of its most used daily touchpoints. Keeping that area looking pristine from day one is exactly what this silicone protection pad is designed to do. Engineered specifically for the LC250's charging recess, this silicone pad sits flush within the console, creating a soft, grippy surface that prevents your phone from sliding around while charging. The raised silicone construction absorbs vibration, effectively eliminating that frustrating rattling noise that a glass-backed phone can produce against a hard plastic surface during driving on uneven terrain — something LC250 owners will encounter often. Unlike adhesive-backed alternatives, this pad requires zero installation effort and leaves absolutely no residue. When it needs cleaning — whether from dust, grit from a trail run, or everyday debris — simply lift it out, rinse it, and drop it back in. It's the kind of thoughtful, low-effort accessory that makes owning a premium 4x4 feel properly finished. What's Included 🟫 Silicone Protection Pad × 1 Precision-fit for the LC250 wireless charging recess 📋 Fitment Reference Confirmed for Toyota Land Cruiser 250 (2024) Product Highlights Precision-cut to fit the LC250 centre console wireless charging recess exactly Soft silicone surface grips your phone and prevents movement while charging Eliminates rattling and tapping noises caused by phone vibration during driving Protects the original OEM surface from scratches, scuffs and daily wear No adhesive, no tools, no modifications — simply place and use Removable and fully washable — lifts out in seconds for easy cleaning Compatible with all Qi wireless charging-enabled smartphones Finished in stealth black to match the LC250's dark interior trim palette Durable silicone material maintains its shape and grip over time Maintains full wireless charging functionality — no signal interference Compatibility Vehicle Model Code Year Range Fitment Toyota Land Cruiser 250 (Prado) LC250 2024+ Direct Fit Toyota Land Cruiser 300 LC300 2021+ Not Compatible Toyota Land Cruiser 200 LC200 2008–2021 Not Compatible Toyota Land Cruiser Prado 150 J150 2009–2023 Not Compatible Installation Notes Difficulty: Effortless  ·  Time: Under 1 minute  ·  Tools Required: None Open the centre console area on your 2024 Land Cruiser 250 and locate the wireless charging recess. Ensure the OEM charging surface is clean and free from dust or debris before fitting. Place the silicone pad flat into the wireless charging recess, aligning it to the edges of the recess. Press lightly to seat the pad — it should sit flush with no lifting at the corners. Place your phone on the pad as normal to confirm wireless charging continues to function correctly. Note: Ensure no large debris or particles are trapped beneath the pad before fitting, as this may cause uneven seating. If the pad lifts at any corner, remove it, clean the recess, and refit. Some very thick phone cases may reduce wireless charging efficiency — test with your specific device. Built for Owners Who Care The LC250 deserves accessories that match its quality. This silicone pad is one of those small upgrades that you'll notice every single day — and wonder how you drove without it. Worldwide shipping available via DHL, FedEx, UPS and TNT. Shop All LC250 Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes.

Victorious Automotive · Toyota LC250 · Exterior Trim Rearview Mirror Side Decoration Trim – Toyota Land Cruiser 250 Prado LC250 (2024–2025) Precision-cut stainless steel mirror surround trim that adds a polished, factory-plus finish to the LC250's exterior profile — available in Silver, Black, and Carbon Fibre Pattern. LC250 Land Cruiser 250 Prado 2024–2025 Stainless Steel Mirror Trim Exterior Decoration No-Drill Fit 3 Colour Options Overview The Toyota Land Cruiser 250 Prado is one of the most capable and visually commanding SUVs on the road today. Its bold exterior lines and refined stance invite owners to personalise further — and the mirror housing is one of the most visible and impactful areas to begin. A well-executed trim upgrade here reads as intentional, considered, and factory-quality. These rearview mirror side decorations are designed exclusively for the 2024 and 2025 LC250. Each piece is formed from high-grade stainless steel and shaped to follow the contour of the mirror housing precisely, sitting flush against the panel with no visible gaps or misalignment. The result is a cleaner, more premium look that elevates the LC250's exterior without drawing attention to itself in the wrong way. Available in Silver, gloss Black, and Carbon Fibre Pattern, these trims offer meaningful customisation regardless of whether you're working with a lighter or darker colour vehicle. Installation requires no drilling or permanent modification — a robust adhesive bond keeps each piece securely in place while remaining fully reversible should you wish to return to stock. What's Included 🪞 Mirror Side Trim Set Left and right pieces included as a pair 🔧 Adhesive Tape Pre-Applied Ready-to-fit 3M-style bonding tape on reverse 📋 Installation Guide Step-by-step fitting instructions included 🛡️ Protective Film Surface protection film applied during transit Product Highlights Designed exclusively for the 2024–2025 Toyota Land Cruiser 250 Prado LC250 Precision-formed stainless steel for a seamless, flush panel fit Three finish options: Silver, gloss Black, and Carbon Fibre Pattern No drilling, cutting, or permanent modification required Strong adhesive bond withstands daily driving, weather, and vibration Corrosion-resistant stainless steel construction for long-term durability Mirrors the factory design language of the LC250 exterior Lightweight trim adds visual impact without added bulk Reversible installation — removable without damage to factory paintwork Supplied as a matched pair for consistent bilateral fitment Compatibility Vehicle Year Range Fitment Toyota Land Cruiser 250 Prado (LC250) 2024–2025 Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 Not Compatible Toyota Land Cruiser 150 Prado 2009–2023 Not Compatible Toyota Hilux / 4Runner All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Thoroughly clean the mirror housing surface using an isopropyl alcohol wipe to remove all wax, grease, and dust. Allow to dry completely before proceeding. Dry-fit both trim pieces against the mirror housing to confirm alignment and positioning before committing to the adhesive bond. Peel the protective backing from the adhesive tape on the reverse of the trim piece, taking care not to touch the adhesive surface. Align the trim precisely against the mirror housing, starting from one edge and pressing inward to avoid trapping air bubbles beneath the surface. Apply firm, even pressure across the entire trim surface for 30–60 seconds to ensure full adhesion, paying particular attention to edges and corners. Repeat for the second mirror housing. Allow the adhesive to cure for at least 2–4 hours before driving or exposing to water. ⚠ Important: Do not install in temperatures below 10°C (50°F) as adhesive performance may be reduced. Ensure the mirror housing surface is completely dry and free of any surface dressings or protectants prior to fitting. If in doubt, professional fitting is recommended. Elevate Your LC250's Exterior A small detail, executed precisely, is what separates a standard finish from a truly considered one. These mirror trims are the kind of upgrade that owners notice — and everyone else simply assumes came from the factory. Shop All LC250 Exterior Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes. Always verify fitment against your specific vehicle variant prior to purchase.

Victorious Automotive · Defender L663 · Exterior Styling Red Brake Caliper Covers for Land Rover Defender 90 & 110 – L663 (2020–2024) A bold, precision-fitted caliper cover set that injects aggressive red contrast into the Defender's wheel arches — no drilling, no permanent modification, no compromise. Defender L663 2020–2024 Vivid Red Finish 4-Piece Set No-Drill Fit Front & Rear Brake Dust Protection Exterior Upgrade Overview The Land Rover Defender L663 — in both the compact 90 and long-wheelbase 110 body styles — is built around a character that's equal parts utilitarian and purposeful. It's a vehicle designed to be noticed, whether navigating urban environments or tackling terrain. The wheels are one of the first things the eye is drawn to, and the caliper area is one of the few visible components that most owners leave completely untouched. These red brake caliper covers are engineered specifically for the Defender 90 and 110 (2020–2024 model years, L663 platform) and slot directly over the existing brake calipers without any drilling, cutting, or permanent modification. The vivid red powder-coated finish delivers an immediate visual upgrade — transforming what is typically a dull, grey component into a deliberate styling statement that complements darker wheel finishes and the Defender's angular bodywork. Beyond aesthetics, these covers also serve a practical function. They shield the underlying calipers from road grime, brake dust accumulation, and surface corrosion — helping maintain the condition of your braking hardware between service intervals. For Defender owners who want their vehicle to look as considered underneath the arches as it does on the exterior, this is one of the most impactful and reversible upgrades available. What's Included 🔴 2x Front Caliper Covers Red finish, sized for Defender front brake assembly 🔴 2x Rear Caliper Covers Red finish, sized for Defender rear brake assembly 🔩 Fitting Hardware All necessary clips and fasteners included 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered to fit Defender 90 & 110 L663 brake caliper geometry Vivid red powder-coated finish resists fading, chipping, and UV degradation No drilling, cutting, or permanent modification required Full four-piece set covers all four corners of the vehicle Acts as a barrier against brake dust, road grime, and surface corrosion Lightweight construction adds negligible mass to the wheel assembly Removable and fully reversible — original calipers remain untouched Compatible with standard Defender road wheels and most aftermarket rims Immediate, high-impact visual upgrade visible through open spoke wheel designs Designed and tested for the 2020–2024 L663 platform specifically Compatibility Model Platform Year Range Body Style Fit Land Rover Defender 90 L663 2020–2024 3-Door SUV Direct Fit Land Rover Defender 110 L663 2020–2024 5-Door SUV Direct Fit Land Rover Defender 130 L663 2022–2024 8-Seat Extended Verify Before Purchase Defender 90/110 (Pre-2020) L316 Pre-2020 All Not Compatible Range Rover Sport L494 L494 2013–2022 5-Door SUV Not Compatible Range Rover Vogue L460 L460 2022–2026 5-Door SUV Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 30–45 Minutes  |  🛠 Tools Required: None Ensure the vehicle is parked on a level surface with the handbrake engaged and wheels cool to the touch. Do not attempt installation immediately after driving. Clean the surface of each brake caliper thoroughly using a cloth or brush to remove brake dust, grime, and any surface debris that could prevent a flush fit. Identify the correct front and rear covers — front covers are typically larger in profile. Test-fit each cover over the caliper before securing to confirm correct positioning. Align the cover squarely over the caliper housing, ensuring all edges are seated evenly. Press firmly until the securing clips engage and the cover sits flush with no movement or rattle. Repeat the process for all four corners. Once fitted, slowly rotate each wheel by hand (if jacked) or visually inspect to confirm no cover is in contact with the wheel or rotor at any point. Take the vehicle for a short, gentle test drive at low speed. Listen for any unusual sounds from the wheel area and recheck all four covers after return. ⚠ Important: These covers are a cosmetic accessory and are not designed to replace, protect, or alter the performance of your braking system. Always ensure covers are correctly and securely fitted before driving. If in doubt, consult a qualified technician. Do not install on vehicles with modified or oversized brake caliper kits without first confirming clearance. Complete Your Defender's Look These caliper covers are one piece of a broader exterior transformation. Explore our full range of Defender L663 accessories — from exterior trim upgrades to protective styling solutions — curated specifically for 2020–2024 models. Shop All Defender L663 Accessories → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, platform codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Exterior Lighting Dynamic LED Turn Signal Side Mirror Lights for Land Rover Defender 90 & 110 (2020–2024) A flowing sequential LED turn signal effect, precision-engineered for the Defender L663 — elevating both visibility and exterior presence in one seamless upgrade. Defender L663 2020–2024 Sequential LED Direct Fit Weather-Resistant Plug & Play Defender 90 Defender 110 Exterior Lighting Overview The Land Rover Defender L663 is a vehicle that demands accessories worthy of its character — purposeful, capable, and built to an uncompromising standard. Whether you're running the Defender 90 in a city environment or putting the 110 through its paces in demanding terrain, every exterior detail tells a story about how seriously you take the machine. These Dynamic LED Turn Signal Side Mirror Lights are designed exclusively for the 2020–2024 Defender generation. Rather than a simple static indicator, the sequential LED sweep creates a progressive, flowing light effect — similar to what you'd find on far more expensive modern performance vehicles. The result is a turn signal that's not only more visible to other road users, but genuinely distinctive and refined in its appearance. Constructed from high-grade weather-resistant materials, these units are built to endure the same conditions your Defender does. The fitment is direct — no cutting, no modification, no specialist tools. They integrate cleanly into the existing mirror housing and work seamlessly with the factory wiring, making this one of the most rewarding visual upgrades available for the current-generation Defender. What's Included 💡 Dynamic LED Turn Signal Lamp (Left) Sequential flowing indicator, driver side 💡 Dynamic LED Turn Signal Lamp (Right) Sequential flowing indicator, passenger side 🔌 Wiring Connectors Plug-and-play connection to factory harness 📄 Installation Guide Step-by-step reference for a clean install Product Highlights Sequential dynamic LED sweep for a premium, flowing turn signal effect Designed specifically for Land Rover Defender 90 & 110 L663 (2020–2024) Direct OEM-style fitment — no cutting or modification required Plug-and-play wiring that integrates with the factory electrical system Weather-resistant construction rated for all climates and terrain conditions Significantly improved lateral visibility for other road users Minimal power draw with long-life LED technology Consistent light output — no flickering or fading over time Subtle, purposeful aesthetic that complements the Defender's design language Sold as a complete pair — both mirrors covered in one purchase Compatibility Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2024 Direct Fit Land Rover Defender 110 L663 2020–2024 Direct Fit Land Rover Defender 130 L663 2022–2024 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–40 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and ignition removed before beginning any work around the mirror housing. Carefully remove the existing mirror indicator lens by releasing the retaining clips on the side mirror housing — no tools or drilling required. Disconnect the factory indicator connector from the original unit and set aside the old lamp. Connect the new Dynamic LED Turn Signal Lamp to the factory wiring harness using the supplied plug-and-play connector. The connector is keyed to prevent incorrect fitment. Seat the new LED unit into the mirror housing, pressing firmly until the clips engage and the unit is flush. Repeat the process for the opposite mirror. Restore the ignition and test both indicators — left and right — to confirm the sequential sweep is functioning correctly. Note: If your Defender is covered by an active manufacturer or dealer warranty, we recommend consulting your authorised Land Rover retailer before installing aftermarket lighting components. Always ensure the indicator function is verified before returning the vehicle to road use. Built for Defenders. Trusted by Owners. Join over 12,300 Land Rover and Defender owners who've upgraded their vehicles with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes referenced on this page are used solely for the purpose of fitment identification. All trademarks remain the property of their respective owners.

Victorious Automotive · Defender L663 · Front Bumper & Winch Land Rover Defender L663 Front Bumper & Winch Kit — Model Years 2020–2023 A precision-engineered front bumper and capstan winch kit built specifically for the Defender L663, delivering serious off-road resilience without compromising the vehicle's distinctive character. Defender L663 2020–2023 ABS Construction Defender 90 & 110 Winch Compatible Direct Fit Off-Road Exterior Upgrade Overview The Land Rover Defender L663 was engineered from the ground up to reclaim the Defender's legacy as an uncompromising off-road machine — and the 2020–2023 generation delivers exactly that. Whether you're running the compact 90 or the long-wheelbase 110, this generation of Defender demands accessories that match its capability and respect its design language. This Front Bumper and Winch Kit is developed exclusively for the L663 platform, offering a choice between a standard front bumper replacement for enhanced protection and aesthetic refinement, or the Enhanced Capstan Kit — a winch-ready configuration that transforms your Defender's front end into a recovery-capable command station. Both variants are crafted from impact-resistant ABS material, chosen for its combination of structural rigidity and low weight. The fitment is precise, the finish is consistent with Defender's rugged aesthetic, and the installation process is designed to be completed without specialist tools. For owners who take their Defender onto demanding terrain — or simply want front-end protection that reflects the vehicle's true character — this kit is the logical next step. What's Included 🛡️ Standard Front Bumper ABS construction — fits Defender 90 & 110 ⚙️ Enhanced Capstan Kit Winch-frame reinforcement for recovery use 🔩 Mounting Hardware All necessary fasteners and brackets included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Engineered exclusively for the Defender L663 platform (2020–2023) Two configurations: Standard Bumper or Enhanced Capstan Winch Kit High-impact ABS construction — tough, lightweight, weather-resistant Winch-compatible capstan frame design for recovery situations Fits both Defender 90 and Defender 110 body configurations Direct OEM-style fitment — no cutting or drilling required Maintains factory sensor and camera compatibility Preserves the Defender's rugged, purposeful aesthetic Suitable for both on-road daily use and demanding off-road environments Both variants must be purchased together to use with capstan/winch frame system Compatibility Model Code Years Body Style Fitment Defender 90 L663 2020–2023 3-Door Short Wheelbase Direct Fit Defender 110 L663 2020–2023 5-Door Standard Wheelbase Direct Fit Defender 130 L663 2022–2023 5-Door Extended Wheelbase Verify Before Purchase Defender L316 L316 Pre-2016 Classic Defender Not Compatible Range Rover Sport L461 / L494 Any — Not Compatible Range Rover Vogue L460 / L405 Any — Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 Minutes  ·  Tools: Basic Hand Tools Park the Defender on a flat, level surface and ensure the engine is switched off and cool before beginning work. Carefully remove the existing factory front bumper by releasing the retaining clips and unfastening the mounting bolts at each bumper end and along the lower fascia. Disconnect any parking sensor harnesses or camera connectors attached to the factory bumper — label each connector to ensure correct reassembly. If fitting the Enhanced Capstan Kit, position the winch reinforcement frame behind the new bumper aperture and secure using the supplied hardware before fitting the outer bumper skin. Align the new front bumper to the factory mounting points, ensuring the panel gaps are even on both sides before tightening any fasteners. Reconnect all sensor and camera harnesses, then test all parking sensors and any front-facing cameras via the Defender's infotainment system before completing fitment. Torque all bolts to specification per the installation guide, then carry out a final visual inspection before driving. ⚠ Important: The winch/capstan unit itself is not included with this kit. To use the capstan frame system, both the Standard Front Bumper and the Enhanced Capstan Kit variants must be purchased. If you are unsure of your specific model year or build, please contact our team on +44 203 943 9919 before ordering. Upgrade Your Defender's Front End Join over 12,300 Land Rover owners who trust Victorious Automotive for premium accessories. Browse the full Defender L663 collection and take 20% off when you purchase any two items. Shop Defender L663 Collection → Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Defender, Land Rover, and L663 — are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue · Exterior Protection Hood Bonnet Cover Stone Deflector & Protection Shield for Land Rover Range Rover Vogue (2018–2024) A precision-fitted bonnet guard engineered to defend the leading edge of your Range Rover Vogue against stone chips, road debris, sand, and insect damage — preserving that factory finish mile after mile. Range Rover Vogue 2018–2024 Stone Deflector Bonnet Guard Black Finish Adhesive Fit Exterior Protection No-Drill Install Overview The Range Rover Vogue sits at the very top of the luxury SUV landscape — a vehicle where condition matters as much as presence. Whether you're navigating motorway miles or tackling a gravel estate driveway, the leading edge of your bonnet is constantly exposed to stone strikes, grit, and airborne debris that can chip, crack, or dull the paintwork over time. Left unprotected, that damage accumulates quietly and becomes both costly and difficult to reverse. This bonnet stone deflector shield is designed specifically to fit the Range Rover Vogue across the 2018 to 2024 model years, sitting flush against the front hood lip to intercept and redirect incoming road debris before it ever makes contact with your paint. Finished in a clean, deep black, it complements the Vogue's refined exterior styling without altering its silhouette or introducing any visual bulk. Installation requires no drilling, no cutting, and no specialist tools. The unit bonds securely via a high-strength double-sided adhesive backing, making this one of the most accessible and rewarding exterior upgrades you can apply to your Vogue in under thirty minutes. It's the kind of detail that owners who care deeply about their vehicles understand immediately — quiet, purposeful, and entirely worth doing. What's Included 🛡️ Hood Stone Deflector Shield 1× pre-formed bonnet guard in gloss black 🔧 Adhesive Backing Strip Pre-applied high-bond double-sided tape 🧼 Surface Prep Wipe For cleaning bonnet edge prior to fitting 📄 Fitting Instructions Step-by-step installation guide included Product Highlights Precision-formed to fit Range Rover Vogue 2018–2024 bonnet profile exactly Deep gloss black finish integrates seamlessly with factory exterior trim Deflects stones, grit, sand, insects, and road debris from paintwork No drilling required — no damage to body panels or hood structure High-strength double-sided adhesive rated for outdoor and all-weather use UV-resistant construction to prevent fading, yellowing, or cracking Aerodynamic profile maintains clean airflow over the bonnet at speed Helps reduce long-term paint repair and touch-up costs significantly Supplied 100% brand new — not a refurbished or remanufactured part Installs in under 30 minutes with no specialist tools or experience needed Compatibility Model Generation Year Range Fit Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Vogue L460 2022–2024 Direct Fit Range Rover Sport L494 2013–2022 Not Confirmed Range Rover Sport L461 2022–2024 Not Confirmed Range Rover Velar L560 2018–2024 Not Confirmed Defender L663 2020–2024 Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  |  🔧 Difficulty: Easy — No Tools Required Ensure the vehicle is parked in a clean, dry environment away from direct sunlight or extreme cold to allow the adhesive to bond properly. Thoroughly clean the leading edge of the bonnet using the included prep wipe, removing all dirt, wax, polish residue, and moisture. Allow to dry completely. Dry-fit the deflector shield along the bonnet edge without removing the adhesive backing. Check alignment and confirm it sits flush and level across the full width. Carefully peel back the adhesive liner on the deflector and, starting from one end, press firmly along the bonnet edge, working progressively to avoid air pockets or misalignment. Apply firm, even pressure along the full length of the deflector for 60 seconds to ensure full adhesive contact across the bonding surface. Avoid washing the vehicle or exposing the bonnet to prolonged moisture for at least 24–48 hours to allow the adhesive to cure fully and reach maximum bond strength. ⚠ Important: Do not attempt installation on a wet, cold, or freshly waxed bonnet surface. Adhesive performance is significantly reduced below 10°C. If you are unsure about compatibility with your specific model year or trim, please contact us before fitting — our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop the Full Range Rover Vogue Collection Explore our complete exterior accessory range for the Range Rover Vogue — from bonnet guards and door sill covers to mirror caps and body trims. Every product is hand-selected for quality and fit by our in-house Land Rover specialists. Shop Range Rover Vogue Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All model names, vehicle designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Real Carbon Fiber Lower Decorative Panel Cover for Range Rover Vogue L460 2024 A genuine carbon fiber interior upgrade purpose-built for the 2024 Range Rover Vogue L460 — delivering motorsport-grade texture and precision fitment in minutes, not hours. Range Rover Vogue L460 2024 Model Year Real Carbon Fiber Interior Trim Lower Panel Cover Direct Fit ISO9001 Factory Adhesive Install Overview The 2024 Range Rover Vogue L460 is one of the most refined SUVs ever produced — a vehicle whose interior deserves nothing less than the same level of thoughtful curation that Land Rover poured into its design. Every surface, every trim panel and every detail communicates intent. For owners who want to push that interior specification further, the choice of upgrade material matters enormously. This lower decorative panel cover is manufactured from genuine woven carbon fiber — not a vinyl wrap, not an ABS imitation, but authentic carbon fiber composite with the distinctive weave pattern, depth and lustre that only the real material can deliver. The panel is precision-formed to follow the exact geometry of the L460's lower interior trim zone, sitting flush against the factory surface with no gaps, no lifting edges and no compromise on fit quality. Installation relies on professional-grade double-sided adhesive pre-applied to the reverse face of the panel. No drilling, no modification to your vehicle's trim, and no specialist tools required. It is the kind of upgrade that looks factory-fitted the moment it goes on — because every dimension has been measured directly against the 2024 L460's production interior. If you own a Vogue L460 and you want a genuinely premium interior enhancement that holds up to daily use, this is exactly how you do it. What's Included 🪶 Carbon Fiber Panel Cover 1 × lower decorative panel — real woven carbon fiber composite 🔧 Pre-Applied Adhesive Professional-grade double-sided tape — factory-positioned on reverse face 📄 Installation Guide Step-by-step fitting instructions included in packaging 🛡️ Protective Packaging Individually wrapped and padded to prevent transit damage Product Highlights Genuine woven carbon fiber construction — not vinyl, not ABS plastic wrap Precision-formed to match the 2024 Range Rover Vogue L460 lower panel geometry exactly Distinctive carbon weave pattern adds visible depth and premium texture Lightweight composite construction — adds virtually no weight to the interior Pre-applied professional adhesive backing for a clean, tool-free installation Sits flush against the factory trim surface with no visible gaps or proud edges Durable finish resists fading, UV degradation and everyday interior wear Manufactured in an ISO9001-certified facility for consistent quality control 100% brand new — individually inspected before dispatch Ships worldwide via DHL, FedEx, UPS or TNT — tracked and insured Compatibility Vehicle Model Code Year Range Trim Level Fitment Range Rover Vogue L460 2024 All Trim Levels Direct Fit Range Rover Vogue L460 2022–2023 All Trim Levels Verify Before Purchase Range Rover Vogue L405 2013–2021 All Trim Levels Not Compatible Range Rover Sport L461 2022–2026 All Trim Levels Not Compatible Range Rover Sport L494 2013–2022 All Trim Levels Not Compatible Defender L663 2020–2026 All Trim Levels Not Compatible Range Rover Velar L560 2018–2024 All Trim Levels Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Begin with the vehicle parked in a clean, dust-free environment. Ambient temperature between 15°C and 30°C will ensure the best adhesive bond. Thoroughly clean the target lower panel surface using an isopropyl alcohol wipe or panel prep solution. Remove all dust, oils, and any residue from previous products. Allow the surface to dry completely — a minimum of 5 minutes is recommended before proceeding. Dry-fit the carbon fiber panel cover against the lower trim area to confirm alignment and check that all edges sit flush before committing to installation. Peel back the protective liner from the pre-applied adhesive tape on the reverse of the panel cover. Align the panel carefully to the lower decorative trim area, starting from one edge and pressing down progressively to avoid trapping air beneath the surface. Apply firm, even pressure across the entire panel face for a minimum of 60 seconds to ensure full adhesive contact. Allow the adhesive to cure for 24 hours before exposing the panel to extreme heat or moisture for optimal long-term bond strength. ⚠ Important: Do not attempt installation on a cold or damp surface. Do not use household cleaning products on the target area as they may leave residues that prevent adhesion. If you have any uncertainty about fitment or installation, contact our team before proceeding — we're available Monday to Friday, 9am–7pm on +44 203 943 9919. Upgrade Your L460 Interior Today Join over 12,300 verified Range Rover, Land Rover and Defender owners who trust Victorious Automotive for precision-fit interior and exterior upgrades. Browse the complete Range Rover Vogue L460 collection for complementary accessories. Shop Range Rover Vogue L460 Collection 22GET20 — 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used solely for the purpose of fitment identification and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious · Range Rover Vogue L460 · Door Protection ABS Carbon Fiber Door Anti-kick Panel – Range Rover Vogue L460 Premium door protection with authentic carbon fiber styling – guards against scuffs, scratches, and impact damage while elevating your Vogue's interior aesthetic. L460 Vogue 2023–2024 ABS Carbon Fiber Extended Version Peel & Stick Install Overview Designed exclusively for the 2023–2024 Range Rover Vogue L460, this anti-kick panel set protects your door cards from daily wear, impacts, and scuff marks while adding genuine carbon fiber visual depth to your cabin. Whether it's passenger feet during everyday driving or the occasional ding from opening doors in tight parking situations, these panels absorb impact and prevent unsightly damage to your interior trim. Engineered from premium ABS plastic with authentic carbon fiber surface treatment, they're lightweight yet durable, and manufactured to ISO9001 standards by a factory with a proven export track record. The extended version ensures full coverage where protection matters most. Installation is straightforward: clean the door card surface, peel the factory-applied 3M adhesive backing, and press firmly into place. No drilling, no permanence, and no learning curve. If you ever decide to remove them, the panels come away cleanly without residue. What's Included 🛡️ Door Anti-kick Panels (Set) Carbon fiber ABS, extended version 📦 Protective Packaging 100% new, factory sealed box ✔️ Pre-applied Adhesive 3M double-sided tape ready to install 📋 Installation Guidance Fitment verification before application Product Highlights Premium ABS construction with authentic carbon fiber finish Extended coverage version for maximum door card protection Impact and scratch-resistant surface treatment Factory-applied 3M adhesive backing – no tools required ISO9001 certified manufacturing standards Direct fit for Range Rover Vogue L460 (2023–2024) Clean removal without adhesive residue Enhances cabin aesthetics with modern carbon fiber look Lightweight design with durable impact resistance Globally exported quality – trusted by enthusiasts worldwide Compatibility Vehicle Model Code Year Range Fit Status Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L405 (Older Gen) 2013–2022 Not Compatible Range Rover Sport L461 2023–2026 Not Compatible Defender L663 2020–2026 Not Compatible Always verify fitment against provided product images before installation. These panels are engineered specifically for L460 door card geometry and will not fit earlier or later generations. Installation Notes Difficulty: Beginner | Time: 15–20 minutes Prepare the Surface: Clean the door card thoroughly with a dry cloth or isopropyl alcohol wipe. Ensure the area is dust-free and completely dry before proceeding. Verify Fitment: Lay out the panels against your door cards without removing adhesive backing. Confirm alignment and positioning match your vehicle's layout. Peel and Position: Starting at one corner, gently peel back the adhesive backing and press the panel firmly onto the door card. Work gradually across the panel to avoid air bubbles. Apply Pressure: Once positioned, apply steady hand pressure across the entire surface for 10–15 seconds to ensure solid adhesion. Let Cure: Allow 24 hours before closing doors forcefully or exposing the vehicle to direct sunlight to maximize adhesive set strength. ⚠️ Important: Test fit panels against your specific L460 door card before applying adhesive. If fitment is not exact, do not install. Victorious Automotive recommends photographing your door layout and comparing against product images to confirm compatibility. Ready to Protect Your Vogue's Interior? Upgrade your Range Rover Vogue L460 with premium carbon fiber door protection that looks as good as it performs. Order today and enjoy a cleaner, more refined cabin finish. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ 4.9★ rating from 12,300+ reviews ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Expert support +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessories specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover Limited. All vehicle names, model codes, and design elements are the property of their respective manufacturers. This product is designed for enthusiasts seeking to customize and protect their vehicles and is sold as-is without warranty from the vehicle manufacturer.

Victorious Automotive · Range Rover Vogue L460 · Interior Trims Front Air Conditioning Vent Trims — Range Rover Vogue L460 (2023–2024) A precision-fit silver ABS interior upgrade that refines the front cabin air vents of your Range Rover Vogue L460 with a clean, factory-complementary finish. Range Rover Vogue L460 2023–2024 ABS Material Silver Finish No-Drill Fit Interior Trim AC Vent Surround ISO9001 Certified Overview The Range Rover Vogue L460 represents the very pinnacle of Land Rover's design philosophy — a cabin that blends digital precision with crafted luxury. Every surface, every detail is considered. If you're looking to sharpen the interior aesthetic without compromising that factory refinement, the air conditioning vent surrounds are a quietly impactful place to start. These front AC vent trims are engineered specifically for the 2023–2024 Range Rover Vogue L460, sitting flush against the dashboard vents with a clean silver finish that elevates the surrounding cabin materials. Constructed from high-grade ABS plastic, they offer genuine resistance to heat, UV exposure, and daily contact wear — maintaining their appearance in a demanding in-cabin environment. Installation requires no drilling, no professional fitting, and no modification to the vehicle. The double-sided adhesive backing allows for a confident, rattle-free bond that holds firmly while remaining reversible if required. For L460 owners who appreciate the finer details of their vehicle's interior, these trims are a natural and considered upgrade. What's Included 🌬️ Front AC Vent Trim Set Complete set of front air conditioning vent surrounds for L460 🔧 Pre-Applied Adhesive Double-sided tape pre-fitted to each trim piece 📦 Original Packaging Delivered in protective original box, brand new condition Product Highlights Precision-engineered fitment for the 2023–2024 Range Rover Vogue L460 dashboard High-grade ABS construction with strong resistance to heat and wear Silver finish that complements the premium L460 interior palette No-drill installation — adhesive-backed for a clean, tool-free fit Rattle-free bond with firm adhesion across the full vent surround Manufactured in an ISO9001 certified production facility 100% new — packaged in original protective box, ready to install UV-resistant ABS material retains colour and shape over time Reversible installation — removable without lasting damage to trim Subtle yet effective interior upgrade with a factory-compatible aesthetic Compatibility Model Generation Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Defender L663 2020–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–25 Minutes  ·  🔩 Tools Required: None Before beginning, carefully compare the trim pieces against your vehicle's front AC vents using the product images to confirm correct fitment and orientation. Clean the surface of each AC vent surround thoroughly using an isopropyl alcohol wipe or a clean, dry cloth. Remove any dust, oils, or residue that could reduce adhesion. Allow the cleaned surfaces to dry completely — ideally for 5–10 minutes — before proceeding. Peel the protective backing from the pre-applied double-sided adhesive on each trim piece, taking care not to touch the adhesive surface. Align each trim piece carefully over its corresponding vent surround, starting from one edge. Do not press fully until you are satisfied with the alignment. Once correctly positioned, apply firm, even pressure across the entire trim for 30–60 seconds to ensure a secure bond. Repeat the process for each remaining trim piece. Allow 24 hours before exposing to moisture or extreme temperature changes for maximum bond strength. ⚠ Important: Always verify fitment by carefully comparing each trim piece to your vehicle's vents before removing any adhesive backing. These trims are designed exclusively for the 2023–2024 Range Rover Vogue L460. Installation on any other model year or variant is not recommended and may result in an incorrect fit. Complete Your L460 Interior Explore the full range of Range Rover Vogue L460 interior accessories at Victorious Automotive — trusted by over 12,300 Land Rover enthusiasts worldwide. Shop All L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, model names, and vehicle references are used solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Infotainment & Climate Upgrades 13-Inch Touchscreen Radio & Climate Control Display Upgrade for Land Rover Discovery 5 L462 (2017–Present) A precision-engineered 13-inch floating touchscreen that replaces your Discovery 5's factory infotainment and climate display with a modern Android 12 platform — retaining all OEM functionality while transforming the driving experience. Discovery 5 L462 2017–Present 13-Inch HD Display Android 12 Wireless CarPlay Android Auto 8-Core CPU 8GB RAM / 128GB ROM DSP Audio OEM Integration Overview The Land Rover Discovery 5 L462 is one of the most capable and refined SUVs ever built — an intelligent blend of off-road competence and interior sophistication. Yet for owners who spend serious time behind the wheel, the factory infotainment system can feel limiting. Slow response times, a lack of wireless connectivity, and an ageing interface are the most common frustrations among Discovery 5 owners, and they're entirely solvable. This 13-inch Android touchscreen upgrade is engineered specifically for the Discovery 5 L462 from 2017 onwards. It replaces both the factory radio screen and the climate control display with a single, cohesive 13-inch floating unit — delivering a seamless, OEM-quality fitment that looks as though it came directly from the factory. Running Android 12 on an 8-core processor with 8GB of RAM, the system is fast, fluid, and capable of running full Android applications alongside wireless Apple CarPlay and Android Auto. What separates this upgrade from generic aftermarket screens is its dedication to retaining every original Discovery 5 feature. Climate controls, heated seats, parking sensors, and vehicle system readouts remain fully operational through the integrated climate panel. The DSP audio chip improves sound staging and clarity across the factory speaker system, meaning the upgrade enhances every aspect of your cabin — not just the screen. For Discovery 5 owners who want a genuinely future-proof interior without compromising the integrity of the vehicle, this is the definitive solution. What's Included 🖥️ 13" Android Radio Screen 1920×1080 HD floating display running Android 12 🌡️ Climate Control Integration Panel Retains full OEM climate and seat functions 🔌 Vehicle-Specific Wiring Harness Plug-and-play connector for L462 architecture 🔧 Mounting Hardware & Brackets Precision-fit fixings for clean, rattle-free installation 📖 Installation Guide Step-by-step instructions with video reference Product Highlights 13-inch floating screen with 1920×1080 HD resolution for a crisp, vibrant display Android 12 operating system with access to the Google Play Store Wireless Apple CarPlay — no cable needed, just connect and go Wireless Android Auto for seamless smartphone mirroring 8-core processor ensures fast, lag-free performance across all functions 8GB RAM and 128GB onboard storage for apps, media, and offline maps Integrated DSP chip for improved audio clarity and sound staging Full OEM feature retention — climate, heated seats, and sensors all intact Plug-and-play fitment designed specifically for the Discovery 5 L462 Floating screen design matches the premium aesthetic of the Discovery 5 cabin Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery 5 SE L462 2017–Present Direct Fit Land Rover Discovery 5 HSE L462 2017–Present Direct Fit Land Rover Discovery 5 HSE Luxury L462 2017–Present Direct Fit Land Rover Discovery 5 First Edition L462 2017–Present Direct Fit Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2015–Present Not Compatible Not sure if this fits your specific build? Call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for a compatibility check before ordering. Installation Notes 📋 Installation Overview — Difficulty: Moderate · Estimated Time: 2–3 Hours Disconnect the vehicle battery and allow the system to fully discharge before beginning any work on the centre console. Remove the existing factory infotainment fascia carefully using trim removal tools — avoid forcing plastic clips to prevent cracking. Disconnect all OEM connectors from the factory radio and climate control display units. Attach the supplied vehicle-specific wiring harness to the new Android unit, ensuring all connectors are fully seated and secure. Mount the climate control integration panel into the lower aperture and confirm all climate, seat, and sensor functions respond correctly. Fit the 13-inch floating display into the upper aperture using the supplied mounting brackets and hardware. Reconnect the vehicle battery, power on the system, and complete the initial Android setup and CarPlay pairing process. Test all original vehicle functions — climate zones, heated seats, parking sensors — before refitting all trim panels. ⚠ Important: This upgrade must be installed alongside the matching climate control display panel shown in the product images. Installation without the correct climate panel will result in loss of climate functionality. Watch the full installation video here before beginning. If you are unsure at any stage, we recommend professional fitment. Upgrade Your Discovery 5 Interior Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium interior upgrades. Every order ships worldwide via DHL, FedEx, UPS, and TNT — and is backed by our 30-day money-back guarantee. Shop All Discovery 5 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Defender L663 · Exterior Lighting LED Front Grille Light Bar V2 for Land Rover Defender 2020+ L663 90 / 110 / 130 Second-generation LED grille light bar engineered specifically for the Defender L663 — delivering integrated daytime running light performance with a factory-cohesive aesthetic. Defender L663 2020–2026 90 · 110 · 130 LED DRL Direct Fit Gen 2 Plug-and-Play Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle that commands attention by design — bold proportions, a purposeful face, and a grille that defines its character. For owners who want to push that presence further while enhancing real-world visibility, the front grille is the most impactful starting point. Any modification here must respect the Defender's visual language while elevating it with modern precision. The Victorious LED Front Grille Light Bar V2 is the refined successor to our original grille lighting solution, engineered with direct feedback from the Defender community. The Gen 2 design integrates a continuous LED light bar seamlessly within the grille aperture, adding integrated daytime running lights that sit flush with the surrounding bodywork. The result is a look that feels intentional — as if Land Rover's design team had always planned for it. Beyond aesthetics, the functional benefit is genuine. Increased daytime visibility makes a meaningful difference in low-contrast conditions — overcast motorways, rural lanes, or early morning commutes — without any compromise to the Defender's rugged identity. The plug-and-play wiring system means no splicing, no guesswork, and no dealer visits required. What's Included 💡 LED Grille Light Bar (Gen 2) Single full-width unit, pre-assembled 🔌 Wiring Harness Plug-and-play connector set included 🔩 Mounting Hardware Kit All fixings and brackets required 📄 Installation Manual Step-by-step printed guide Product Highlights Second-generation design with refined LED output and improved light diffusion Integrated daytime running lights for enhanced road presence and safety Direct-fit application — no cutting, drilling, or bodywork required Plug-and-play wiring compatible with factory Defender L663 harness Fits all three Defender L663 body variants — 90, 110, and 130 LED technology for low power draw, high output, and long service life Flush-mount installation maintains clean, factory-cohesive grille profile Durable construction rated for all-weather and off-road environments Visually complements both standard and accessorised Defender builds Straightforward home installation achievable in under two hours Compatibility Model Code Year Range Fit Defender 90 L663 2020 – 2026 Direct Fit Defender 110 L663 2020 – 2026 Direct Fit Defender 130 L663 2020 – 2026 Direct Fit Defender 90 / 110 (Classic) L316 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Beginner–Intermediate  |  ⏱ Estimated Time: 60–90 Minutes Ensure the vehicle is parked on level ground with the engine off and ignition removed from the vehicle before beginning. Carefully remove the factory front grille by releasing the retaining clips along the top and side edges — no special tools required. Position the LED Grille Light Bar V2 into the grille aperture and align with the provided mounting points. Secure using the included bracket hardware. Route the wiring harness behind the grille panel and through to the vehicle's engine bay, following the existing factory cable channels where possible. Connect the plug-and-play harness to the appropriate factory connector — refer to the installation manual for the specific connector location on L663 models. Refit the front grille panel, pressing firmly along all clip points until fully secured. Reconnect the vehicle ignition and test the LED light bar function before completing the installation. ⚠ Important: Confirm your exact Defender variant (90, 110, or 130) and production year before installation. An installation video is available online for additional reference. If you are unsure at any stage, consult a qualified automotive technician. Incorrect wiring connections may affect vehicle electronics. Upgrade Your Defender. Define Your Drive. Join over 12,300 Land Rover owners who trust Victorious Automotive for premium accessories that are engineered to fit, built to last, and designed to impress. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL · FedEx · UPS · TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Defender L663 · Interior Styling Gloss Black Interior Replacement Kit — Land Rover Defender 110 (2020–2026) L663 A comprehensive 11-piece gloss black interior upgrade engineered to transform the cabin of your Defender 110 with a clean, cohesive, and thoroughly modern aesthetic. Defender L663 2020–2026 11-Piece Kit Gloss Black Direct Fit LHD & RHD ABS Polymer No Drilling Interior Trim Overview The Land Rover Defender 110 L663 arrived as one of the most talked-about automotive relaunches in recent memory — and with good reason. Its blunt, purposeful cabin design is part of what makes it so compelling. But while the Defender's bones are extraordinary, many owners find the standard trim panels lack the depth and refinement that the rest of the vehicle promises. This gloss black interior kit is designed precisely for that gap. Crafted from high-grade ABS polymer with a deep, lacquered gloss black finish, each piece in this kit is precision-moulded to match the exact contours of your Defender 110's factory interior. From the door mouldings and handle surrounds to the centre console and steering wheel cover, every component replaces the original fitment cleanly — no visible gaps, no adhesive residue, no compromise. The finish is resistant to fingerprints, UV exposure, and the general wear of daily use. Whether your Defender 110 wears the standard trim or a more elevated specification, the gloss black palette integrates seamlessly. It complements darker interior colourways and creates a striking contrast against lighter ones, giving the cabin a focused, purposeful feel that matches the Defender's character perfectly. Available in both left-hand and right-hand drive configurations to ensure correct fitment regardless of your market. What's Included 🚪 Door Moulding Covers Set of 4 — front and rear doors, gloss black finish ✋ Door Handle Covers Set of 3 — interior pull handle surrounds 🎛️ Centre Console 1x full replacement overlay panel 🔘 Steering Wheel Cover 1x gloss black trim surround insert 💪 Front Grab Handles Set of 2 — passenger and driver side Product Highlights Deep lacquered gloss black finish — consistent sheen across all 11 pieces Precision-moulded ABS polymer for exact OEM contour matching Available in LHD and RHD configurations — select your variant at checkout Tool-free clip-in installation on most components — no drilling required UV-stabilised surface coating to resist fading and discolouration over time Scratch and impact resistant — built for everyday Defender use Does not interfere with window switches, handles, or trim electronics Compatible with standard, S, SE, X-Dynamic, and X trim levels Cohesive full-kit design — every piece matched to the same finish batch Elevates cabin presence without permanent modification to factory trim Compatibility Vehicle Model Code Year Range Drive Fitment Defender 110 L663 2020–2026 Left-Hand Drive Direct Fit Defender 110 L663 2020–2026 Right-Hand Drive Direct Fit Defender 90 L663 2020–2026 LHD / RHD Not Compatible Defender 130 L663 2022–2026 LHD / RHD Not Compatible Defender 110 (Mk1) Pre-2020 Pre-2020 LHD / RHD Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–75 Minutes  ·  Tools Required: Trim removal tool (optional) Start with a clean, dry interior. Wipe down all existing trim surfaces with an isopropyl alcohol cloth to remove oils and dust — this ensures a flush, rattle-free fit on clip-in components. Begin with the door moulding covers. Starting from one corner, press firmly along the panel edge until each clip engages. Work door by door in sequence — front driver, front passenger, rear driver, rear passenger. Fit the door handle covers by aligning the tabs with the factory cutouts and pressing until seated. No adhesive is required; the factory handle geometry holds the covers firmly in position. Install the centre console overlay by aligning the edges with the factory console surround. Apply even pressure across the full surface to engage all retention points simultaneously. Fit the steering wheel cover trim surround by locating the alignment tab at the base of the steering column surround and pressing inward until the clip engages at the top. Install the front grab handle covers by removing the factory handle insert (if applicable), placing the gloss black cover over the handle body, and pressing until clipped securely into place. Once all pieces are fitted, run your fingertips along each panel edge to confirm there are no lifted sections. Apply light pressure to any areas that feel uneven to fully seat remaining clips. Important: Always select the correct LHD or RHD variant before ordering. Door handle cover geometry and console orientation differ between drive configurations. Incorrect selection will result in a misfit that cannot be corrected on-site. If you are unsure of your vehicle's specification, refer to your VIN plate or contact us on +44 203 943 9919 before ordering. Upgrade Your Defender Interior Today The Defender 110 deserves a cabin that matches its presence outside. This gloss black interior kit is one of the cleanest, most cohesive upgrades available for the L663 — and it ships worldwide via DHL, FedEx, UPS, and TNT. Shop All Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Accessories Matte Black Snorkel for Land Rover Defender 2020–2026 L663 Relocate your Defender's air intake to elevated, cleaner air — engineered for serious off-road capability without compromising the L663's commanding stance. Defender L663 2020–2026 High-Grade ABS Matte Black Direct Fit Raised Air Intake Water Wading Off-Road Ready Overview The Land Rover Defender L663 was engineered from the ground up to be one of the most capable production off-roaders on the planet. Whether you're crossing shallow rivers, navigating dusty outback tracks, or pushing through deep mud, the L663 demands accessories that match its ambition — components built to perform where others fail. This Matte Black Snorkel relocates the engine's air intake from the engine bay to a position high on the A-pillar, drawing in cooler, cleaner, drier air from above wheel-arch level. The result is a meaningful improvement in combustion efficiency across demanding terrain — and a critical layer of protection when wading through water crossings that would otherwise risk hydrolocking your engine. Constructed from high-grade ABS plastic, the snorkel is UV-resistant, structurally rigid, and finished in a matte black that sits naturally alongside the Defender's existing exterior trim. Unlike generic snorkel kits that require cutting, welding, or permanent bodywork modification, this unit is designed as a precision-fit accessory for the L663 platform specifically. The mounting hardware aligns with existing body points, keeping installation clean and reversible while delivering results that feel factory-intentional. It's the kind of upgrade that serious Defender owners make before the adventure begins — not after things go wrong. What's Included 🌬️ Snorkel Intake System Full A-pillar snorkel body in matte black ABS 🔩 Installation Hardware Kit All required bolts, brackets, seals and clamps 🔗 Intake Hose & Connectors Flexible ducting to route airflow to the airbox 📋 Instruction Manual Step-by-step fitment guide with diagrams Product Highlights Raises air intake to A-pillar height for cleaner, cooler air ingestion Significantly reduces risk of engine hydrolocking during water wading Matte black ABS finish blends seamlessly with Defender L663 exterior trim UV-stabilised material resists fading, cracking, and warping over time Precision-engineered for L663 body geometry — no cutting or welding required Improves engine breathing efficiency across high-dust and low-oxygen environments Robust mounting points ensure vibration resistance on rough terrain Fully reversible installation — no permanent modifications to your vehicle Pre-formed snorkel head directs intake away from rain and debris ingestion Compatible with both petrol and diesel L663 Defender powertrains Compatibility Model Code Year Range Engine Fitment Defender 90 L663 2020–2026 P300 / D200 / D240 / D300 Direct Fit Defender 110 L663 2020–2026 P300 / P400 / D200 / D240 / D300 Direct Fit Defender 130 L663 2022–2026 P300 / P400 / D300 Direct Fit Defender (Classic) L316 Pre-2016 All Not Compatible Range Rover Sport L461 / L494 All All Not Compatible Range Rover Vogue L460 / L405 All All Not Compatible Installation Notes 📐 Difficulty: Intermediate  ·  ⏱ Estimated Time: 2–3 Hours Park the Defender on a level surface and allow the engine to cool completely before beginning any work. Remove the factory A-pillar trim panel from the driver's side (or passenger's side depending on your market configuration) to access the mounting area. Route the intake hose from the engine airbox up through the A-pillar channel, using the provided clamps and seals to create an airtight connection at each joint. Position the snorkel body against the A-pillar and align the pre-drilled mounting points with the corresponding body locations — no drilling is required on the vehicle. Secure the snorkel using the supplied hardware, ensuring all bolts are torqued evenly to prevent panel stress or flex under off-road vibration. Refit the A-pillar trim and confirm the snorkel head is positioned correctly to face forward and away from direct rain ingestion. Start the engine and inspect all hose connections for any air leaks before taking the vehicle off-road. ⚠ Note: Professional installation is recommended if you are unfamiliar with bodywork or engine intake systems. Ensure all intake connections are fully sealed before water wading. Exceeding your vehicle's manufacturer-rated wading depth remains the operator's responsibility regardless of snorkel fitment. Built for the Defender. Ready for Anything. Explore our full range of exterior upgrades and off-road accessories curated specifically for the Defender L663 platform — each part selected and tested to meet the standard your Defender deserves. Shop Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for compatibility identification purposes. Always verify fitment for your specific vehicle variant before purchase.

Victorious Automotive · Defender L663 · Exterior Accessories Union Jack Tool Box for Land Rover Defender L663 (2020–2026) — High Gloss Black with Locking Mechanism A distinctly British exterior storage solution purpose-built for the Defender L663, combining bold Union Jack styling with secure, practical tool organisation for every journey. Defender L663 2020–2026 Exterior High Gloss Black Union Jack Design Locking Storage Tool Box Direct Fit Overview The Land Rover Defender L663 was reborn in 2020 as a vehicle that honours decades of off-road heritage while embracing modern engineering and a deeply considered design language. For owners who demand that every accessory live up to that same standard, the exterior details matter just as much as what's under the bonnet. This Union Jack Tool Box is built with exactly that mindset — a piece that looks as though it belongs on the Defender from the factory floor. Finished in high gloss black with a signature Union Jack graphic, this tool box is more than a storage solution — it's a deliberate styling statement that pays homage to the Defender's British roots. The integrated lock provides genuine security for tools, recovery kit, or trail essentials, while the durable outer shell is constructed to handle the demands of daily driving, overland adventures, and everything in between. Where generic storage boxes compromise on fitment or finish, this unit has been developed specifically for the Defender L663 platform. Whether you're headed across the Brecon Beacons or navigating a city car park, the Union Jack Tool Box adds a purposeful, characterful touch to your Defender's exterior — without looking like an afterthought. What's Included 🧰 Union Jack Tool Box High gloss black finish with Union Jack graphic 🔒 Integrated Lock & Key Set Pre-fitted locking mechanism with keys included 🔩 Mounting Hardware All fixings required for secure installation 📄 Fitment Guide Step-by-step installation reference Product Highlights Engineered specifically for the Defender L663 (2020–2026) platform High gloss black finish with bold, inlaid Union Jack design Integrated key lock for secure storage of tools and trail gear Durable outer shell resistant to road debris and UV exposure Spacious interior cavity for tools, recovery equipment, or emergency kit Clean, OEM-adjacent aesthetic that complements Defender styling No drilling or permanent modification required for fitment Lightweight construction — minimal impact on vehicle payload Suitable for on-road and mild off-road use A distinctive British heritage touch for your Defender exterior Compatibility Vehicle Code Years Fitment Land Rover Defender 90 / 110 / 130 L663 2020–2026 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender (Classic) L316 Pre-2016 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–40 Minutes  ·  No Professional Required Unbox the tool box and verify all hardware components are present against the included fitment guide. Identify the correct mounting position on the Defender L663 exterior — refer to the guide for precise placement. Test-fit the tool box in position before committing to any fixings, ensuring clearance and alignment are correct. Secure the tool box using the provided mounting hardware, tightening fixings evenly to avoid stress on the shell. Confirm the locking mechanism operates smoothly and that the lid closes flush with no gaps or rattles. Give the finished installation a once-over at walking speed before your first trip to confirm all fixings are secure. ⚠ Please Note: Confirm your exact Defender L663 variant (90, 110, or 130) and model year prior to purchase. If you have accessory rails, roof rack systems, or aftermarket load areas fitted, check for clearance before installation. Contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions before ordering. Outfit Your Defender the Right Way Every detail on the Defender L663 deserves the same consideration Land Rover put into building it. Browse our full Defender L663 exterior collection at Victorious Automotive and discover accessories engineered to the same standard as your vehicle. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious · Range Rover L460 · Exterior Grilles Range Rover L460 Carbon Fibre Grille Premium carbon fibre replacement grille that transforms your Vogue's front-end presence with authentic weave texture and flawless fitment. L460 2022–2026 Real Carbon Fibre Direct Fit OEM Quality Overview If you own a Range Rover Vogue L460, you already understand that every detail matters. Your grille is one of the first things people notice—and it's one of the first things you notice every time you step up to your vehicle. This carbon fibre replacement grille elevates that critical visual anchor from standard plastic to purposeful engineering. Our carbon fibre grille replaces the original OEM unit with a precision-engineered piece that uses genuine 3K twill weave carbon fibre. It's not a cosmetic veneer; it's a structural replacement that delivers authentic material and superior rigidity. The weave is visible, consistent, and finished in gloss or satin depending on your specification, giving your L460 that high-end motorsport aesthetic without compromise. Why choose carbon over alternatives? Carbon fibre is lighter than the OEM plastic unit, more durable against minor impacts, and it doesn't yellow or fade. It also signals to other enthusiasts that your L460 has been thoughtfully upgraded by someone who cares about substance, not just flash. What's Included 🎯 Carbon Fibre Grille 3K twill weave, gloss or satin finish 🔧 Stainless Hardware Torx fasteners and all mounting clips 📋 Installation Guide Step-by-step PDF with image reference 🛡️ Protective Packaging Foam-lined box to ensure safe delivery Product Highlights Genuine 3K twill carbon fibre construction, not printed plastic Available in gloss black or satin finish for versatile styling Direct bolt-on replacement—no cutting, adhesive, or modification needed Lighter than OEM plastic unit, reduces unsprung weight Superior rigidity and impact resistance compared to original UV-resistant finish resists yellowing and UV degradation Proudly designed and tested for L460 Vogue (2022–2026) Matches interior carbon trim available across the L460 range Backed by Victorious 30-day money-back guarantee Ships worldwide via DHL, FedEx, UPS, or TNT Compatibility Model Year Range Status Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar 2018–2022 Not Compatible Installation Difficulty Level: Beginner to Intermediate | Est. Time: 30–45 minutes Park your L460 on a level surface and ensure the engine is cold. Open the bonnet and locate the six T25 Torx fasteners securing the OEM grille (three on each side of the centre spine). Carefully remove the OEM grille by unscrewing all fasteners and gently pulling the grille away from the front bumper—no force required. Set the OEM grille aside safely. Inspect the mounting points for any debris and clean if necessary. Position the carbon fibre grille against the mounting points, aligning the centre spine first. Insert and hand-tighten all six fasteners evenly in a cross pattern to ensure even pressure. Using a T25 Torx driver, torque each fastener to 2.5 Nm (no overtightening—carbon fibre is durable but not steel). Close the bonnet, step back, and inspect your upgrade from multiple angles. Important: Do not overtighten fasteners. Carbon fibre grilles require careful but firm mounting only. If you are not confident with tools, we recommend professional installation by an approved Land Rover or specialist technician. Ready to Elevate Your L460? Your Range Rover Vogue deserves details that reflect its engineering pedigree. This carbon fibre grille isn't a budget upgrade—it's a thoughtful investment in presence, durability, and authenticity. Order with confidence, backed by our 30-day money-back guarantee. Shop L460 Upgrades Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover distributor. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed for the Range Rover Vogue L460 (2022–2026) and is manufactured to the highest standards of fit and finish, but installation at an authorized service centre is recommended for warranty peace of mind.

Victorious · BMW X3/X4 · Interior Upgrades BMW X3/X4 Climate Control Screen Enhancement Kit – 2018–2021 G01/G02 Premium 8.8-inch capacitive touchscreen upgrade with integrated climate, seat control, and advanced voice recognition for seamless cabin management. BMW G01/G02 2018–2021 Plug-and-Play Android OS Voice Control IPS Touch Overview The BMW X3 (G01) and X4 (G02) are precision-engineered luxury SUVs, and their cabins deserve equally refined control interfaces. This Climate Control Screen Enhancement Kit elevates the standard HVAC and radio display into a modern, intuitive touchscreen ecosystem—without altering your vehicle's original architecture. The 8.8-inch IPS capacitive display replaces the factory climate unit with a responsive, high-resolution interface (1280×800) running Android OS. Full functionality includes air conditioning, seat heating, seat ventilation, and radio controls, all accessible via smooth touch gestures or multi-language voice commands. The system is tested for reliability and backed by a 12-month warranty. Installation is straightforward: USB connection with simple plug-and-play deployment means minimal disruption to your interior. Whether you're upgrading for everyday convenience or seeking a modern touch to match contemporary cabin expectations, this kit delivers both form and function. What's Included 🖥️ Climate & Radio Control Screen 8.8" IPS capacitive display, 1280×800 resolution 📖 Installation Guide Step-by-step wiring and placement instructions 🔌 Cables & Connectors USB integration cables and all necessary adapters ⚙️ Pre-Tested Unit Factory QA certified for seamless performance Product Highlights 8.8-inch IPS capacitive touchscreen with 1280×800 resolution Android operating system with multi-language voice control Plug-and-play USB connection—no modifications required Full climate control: refrigeration, heating, and fan speed Seat heating and ventilation status display and control Customizable themes and interface layouts Direct replacement for factory climate unit 12-month manufacturer's warranty included Thoroughly tested for durability and reliability Compatible with X3M and X4M performance variants Compatibility Model Generation Year Range Status BMW X3 G01 2018–2021 Direct Fit BMW X4 G02 2018–2021 Direct Fit BMW X3M G01 2018–2021 Direct Fit BMW X4M G02 2018–2021 Direct Fit BMW X3 (Pre-2018) F25 2010–2017 Not Compatible BMW X4 (Pre-2018) F26 2014–2017 Not Compatible Installation Installation Difficulty: Moderate | Time: 30–45 minutes Power down: Switch off the ignition and allow systems to fully reset (2–3 minutes). Remove trim: Carefully unclip the factory climate control bezel from the dashboard (refer to guide for trim locations). Disconnect factory unit: Unplug the original climate display connector and remove securing screws. Install new screen: Position the new 8.8-inch unit into the opening, align flush with the dashboard, and secure with provided fasteners. Connect USB & power: Plug the USB cable into the vehicle's existing USB port or auxiliary power point; plug the connector into the new screen. Reinstall trim: Snap the bezel back into place around the new display. Test all functions: Restart the vehicle and verify climate control, seat heating/ventilation, radio controls, and voice commands. Professional Installation Recommended: While this kit is designed for DIY installation, we recommend professional fitment to ensure optimal integration with your vehicle's electrical systems and to preserve any existing warranties. Victorious partners offer installation services—contact us for details. Why Choose This Kit Your BMW X3 or X4 deserves controls that match its engineering calibre. This Climate Control Screen Enhancement Kit modernises your cabin without compromise: responsive touchscreen technology, intuitive voice commands in multiple languages, and seamless integration with heating, cooling, and seat comfort systems. The 12-month warranty and thorough factory testing mean you're investing in a proven upgrade, not an experiment. Whether upgrading an aging interface or adding modern convenience to a newer model, this kit delivers measurable improvement to daily driving experience. Ready to Upgrade Your X3 or X4? Experience the difference a premium control interface makes. Order your Climate Control Screen Enhancement Kit today and transform your cabin into a modern, responsive driving environment. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 stars · 12,300+ reviews ✓ 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any subsidiaries. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket enhancement and is sold as-is for enthusiast use. Always verify vehicle compatibility before purchase and follow local regulations regarding vehicle modifications.

Victorious Automotive · Range Rover Sport L461 · Exterior Upgrades Gloss Black Upgrade Kit – Range Rover Sport L461 (2022–2024) A complete five-piece gloss black exterior transformation kit, engineered to deliver a factory-style Black Pack finish on your Range Rover Sport L461 — no compromise on fitment or finish quality. Range Rover Sport L461 2022–2024 Gloss Black ABS Construction UV-Resistant Finish De-Chrome Kit OEM-Style Fitment 5-Piece Kit Exterior Overview The Range Rover Sport L461 is one of the most dynamically styled Land Rover vehicles ever produced — and with its sharply sculpted bodywork and commanding road presence, it deserves accessories that match its character. The factory chrome and silver exterior accents, while well-finished, leave many owners wanting something darker, more purposeful, and more in keeping with the Sport's performance-led identity. This Gloss Black Upgrade Kit for the Range Rover Sport L461 (2022–2024) is a curated five-piece set covering the vehicle's most visually prominent exterior trim points — from the front grille and bumper surrounds to the bonnet vents, side vents, and tailgate cover. Each component is manufactured from high-grade ABS plastic and finished in a deep, UV-resistant gloss black that holds its depth and clarity over time, even under direct sunlight and daily driving conditions. Whether you're completing a full de-chrome transformation or simply want to bring your Sport in line with the look of the factory Black Pack, this kit offers a precise, clean-looking result that sits flush and true to the original OEM panel lines. No drilling. No cutting. Direct swap fitment throughout. What's Included 🏁 Front Grille Full gloss black replacement grille — the centrepiece of any black pack transformation 🔲 Front Bumper Trims Gloss black surrounds replacing silver factory trims on the lower front bumper 🔳 Bonnet (Hood) Vents Direct-fit gloss black vents to replace the factory chrome-finished inserts ⬛ Side Vents Gloss black side vent replacements for a cohesive blacked-out profile 🚘 Tailgate Cover Gloss black rear tailgate trim to complete the full exterior black-out Product Highlights OEM-style fitment — direct replacement for factory trim components with no modification required High-gloss UV-resistant finish — maintains deep black clarity without fading or chalking over time Durable ABS construction — lightweight, impact-resistant, and weather-proof for year-round use Complete five-piece kit — every key exterior accent covered in a single purchase Factory Black Pack aesthetic — achieves the look of the official Land Rover Black Pack upgrade Perfect for de-chroming — eliminates chrome and silver accents for a sleek, unified exterior Flush panel-line fitment — sits true to original body contours with no gaps or misalignment No drilling or cutting required — designed for a clean, reversible direct-swap installation Suitable for all standard L461 trim levels — works across SE, Dynamic SE, Autobiography, and more Pairs perfectly with other Victorious L461 exterior upgrades for a full custom build Compatibility Model Generation Years Fitment Range Rover Sport SE L461 2022–2024 Direct Fit Range Rover Sport Dynamic SE L461 2022–2024 Direct Fit Range Rover Sport Dynamic HSE L461 2022–2024 Direct Fit Range Rover Sport Autobiography L461 2022–2024 Direct Fit Range Rover Sport First Edition L461 2022–2024 Direct Fit Range Rover Sport (Factory Black Pack) L461 2022–2024 Not Required Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L460 L460 2022–2024 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 2–4 Hours  ·  Tools Required: Trim removal tools, microfibre cloth Park the vehicle on a flat surface, allow the engine to cool fully, and ensure the exterior panels are clean and dry before beginning. Using plastic trim removal tools, carefully unclip the existing factory front grille assembly from its mounting points — take care not to scratch surrounding paintwork. Remove the front bumper silver trim inserts by releasing the retaining clips along the lower bumper section. Set original parts aside in a safe location. Unclip the factory bonnet vent inserts by lifting gently from the inner edge — these are typically held by push-fit tabs and release with minimal force. Remove the side vent panels using the same trim clip release method, working from the rear edge of each vent forward. Unclip the tailgate cover trim from the rear of the vehicle, releasing any push-pins or clip fasteners along the panel edge. Align each new gloss black component in position, press firmly until all clips seat fully, and confirm fitment is flush with adjacent panels before moving to the next piece. Wipe down all installed components with a clean microfibre cloth to remove fingerprints and confirm a uniform finish. ⚠ Please Note: Professional installation is recommended for best results, particularly for the front grille and bumper trims. Retain all original factory components — this modification is fully reversible and original parts can be refitted at any time. Always use plastic trim tools to avoid paint or clip damage. The Complete Black Pack Look — In One Kit From the front grille to the tailgate, this kit delivers a cohesive, factory-quality gloss black transformation for your Range Rover Sport L461. Explore our full range of L461 exterior upgrades to take the build further. Shop All Range Rover Sport L461 Upgrades Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔁 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.