Automotive

Victorious Automotive · Defender L663 · Exterior Trim Land Rover Defender 110 Rear Bumper Plate Cover Trim Stickers — ABS Black, L663 2020+ A precision-formed ABS rear bumper plate cover that reinforces the Defender 110's bold exterior stance with a factory-matched black finish and a hassle-free adhesive installation. Defender 110 L663 2020–2026 ABS Black Rear Bumper Exterior Trim Adhesive Fit ISO9001 Certified Model LLK2841 Overview The Land Rover Defender 110 L663 is a vehicle built to make a statement — utilitarian, purposeful, and unmistakably bold. Every surface detail contributes to its commanding road presence, and the rear bumper area is no exception. Whether you're running a daily commute or heading off-road, the rear end of your Defender deserves the same attention to detail as the rest of the build. This Rear Bumper Plate Cover Trim is designed specifically for the 2020-onwards Defender 110 L663, engineered to sit flush against the bumper's lower plate section with no drilling or cutting required. Formed from high-grade ABS plastic and finished in a deep satin black, it integrates seamlessly with the Defender's existing exterior aesthetic — whether your vehicle is in Santorini Black, Carpathian Grey, or any other factory colour. The fitment uses purpose-selected automotive-grade adhesive tape, the same technology used in OEM trim applications across the industry. The result is a clean, rattle-free attachment that holds firmly through temperature extremes, road wash, and the kind of conditions a Defender genuinely encounters. It's a subtle upgrade that looks like it was always there. What's Included 🛡️ Rear Bumper Plate Cover Trim 1x ABS Black trim panel, model LLK2841 🔧 Adhesive Mounting Tape Pre-cut automotive-grade tape included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed for the 2020+ Defender 110 L663 bumper profile High-grade ABS construction — impact-resistant and lightweight Deep satin black finish complements all factory Defender colours ISO9001 certified manufacturing for consistent quality control No drilling, no cutting — clean adhesive-only installation Automotive-grade tape included; pre-cut for exact panel fitment Resistant to UV fading, water ingress, and road debris Rattle-free bond once cured — flush sit against bumper surface Dimensions: 79cm L × 20cm W × 10cm H | Weight: 300g Direct replacement aesthetic — looks factory-fitted from day one Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Defender 110 (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🛠 Tools Required: None Park the Defender 110 on a level surface and allow the bumper to cool to ambient temperature before starting — avoid installation in direct sunlight or below 10°C for best adhesive performance. Thoroughly clean the rear bumper plate surface using an isopropyl alcohol wipe or panel wipe solution, removing all road film, wax, and grease. Allow to dry completely before proceeding. Dry-fit the ABS trim cover against the bumper surface to confirm alignment and panel seating before committing the adhesive. The trim should sit flush with no raised edges. Peel the protective backing from the pre-cut adhesive tape strips. Position the trim carefully, starting from the centre and working outward to avoid air pockets. Apply firm, even hand pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Pay particular attention to corners and edges. Allow the adhesive to cure for a minimum of 24 hours before subjecting the vehicle to rain, washing, or high-speed motorway driving. ⚠ Note: Do not attempt to reposition the trim once the adhesive tape has made full contact with the bumper surface. Adhesive effectiveness is significantly reduced if the trim is removed and re-applied. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Complete Your Defender's Exterior This bumper trim is just the beginning. Explore the full range of Defender 110 L663 exterior accessories at Victorious Automotive — curated specifically for owners who hold their vehicles to the same standard we do. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Accessories Foldable Liftable Stainless Steel Roof Ladder – Land Rover Defender L663 (2020–2026) A precision-engineered, corrosion-resistant roof ladder purpose-built for the Defender L663 — making roof rack access effortless without compromising the vehicle's commanding exterior. Defender L663 2020–2026 Stainless Steel Foldable Design Quick-Release CE Certified Rustproof Left Placement Exterior Upgrade Overview The Land Rover Defender L663 was reborn as a vehicle that blends authentic off-road capability with a modern, purposeful design language. Whether you're loading gear onto a rooftop tent platform, accessing a roof rack, or navigating demanding terrain with expedition-grade kit, seamless roof access is not just convenient — it's essential. The Defender's high roofline demands a solution that's both robust and thoughtfully integrated. This Foldable Liftable Stainless Steel Roof Ladder is designed exclusively for the 2020–2026 Defender L663. Fabricated from premium-grade stainless steel, it offers a direct-fit installation on the left-hand side of the vehicle, aligning cleanly with the Defender's body profile. The foldable and liftable mechanism means the ladder tucks away when not in use, preserving both aesthetics and departure clearance on the trail. The quick-release system ensures the ladder can be deployed and stowed without tools, making it an ideal companion for real-world adventure use. CE certified and built to resist corrosion across all climates — from coastal salt spray to alpine snow — this is a ladder that earns its place on a working Defender. What's Included 🪜 Roof Ladder Kit Full stainless steel ladder assembly with all mounting hardware included 🔩 Mounting Hardware All necessary fixings, brackets, and fasteners for secure installation 📋 Installation Guide Step-by-step fitting instructions for straightforward installation Product Highlights Premium stainless steel construction for exceptional strength and long-term durability Foldable and liftable design allows compact storage when not in active use Quick-release mechanism enables tool-free deployment and stowing in seconds Rustproof and fully corrosion-resistant across all weather environments Direct-fit engineering specific to the Defender L663 (2020–2026) body structure CE certified — meets European safety and quality standards Left-side placement aligns naturally with driver-side roof access workflow Rigid and stable underload, providing confident footing at height Clean integration that complements the Defender's utilitarian exterior aesthetic Suitable for expedition, overlanding, and everyday practical use Compatibility Vehicle Code Year Range Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Defender 90/110 (Classic) L316 1983–2016 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes 🔧 Difficulty: Moderate  ·  ⏱ Estimated Time: 45–90 Minutes  ·  👤 1–2 People Recommended Lay out all components from the kit and verify all hardware is present before beginning installation. Park the Defender on a level surface and ensure the vehicle is stationary and secure throughout the process. Identify the left-side mounting points on the Defender L663 body — refer to the included installation guide for precise locations. Position the ladder assembly against the vehicle and align the mounting brackets with the designated fixing points. Secure the brackets using the supplied hardware, tightening to the torque specification noted in the guide. Do not overtighten. Test the fold-and-lift mechanism through several cycles to confirm smooth, unobstructed operation. Engage the quick-release function to verify secure locking in both the deployed and stowed positions. Conduct a final visual inspection of all fixings and confirm no components are loose before use. ⚠ Important: Professional installation is recommended if you are unfamiliar with vehicle bodywork fixings. Always verify your specific Defender variant (90, 110, or 130) is compatible before fitting. Do not exceed the rated load capacity of the ladder. Periodically inspect all fixings after off-road use. Built for Defenders That Actually Work At Victorious Automotive, we stock accessories chosen for real-world performance — not just aesthetics. This roof ladder is exactly the kind of purposeful addition your L663 deserves. Explore our full Defender exterior range or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) for fitment advice. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle variant prior to purchase.

Porsche · Cayman · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayman 2010–2016 (PCM3.1) Retrofit wireless Apple CarPlay, Android Auto, and full mirror-linking into your Porsche Cayman's factory PCM3.1 system — no head unit swap, no permanent modifications. PCM3.1 Wireless CarPlay Android Auto 2010–2016 Plug & Play iOS 9+ Aluminium Housing 12V Siri Voice Control Overview The Porsche Cayman built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — capable for its era, but without the native smartphone integration that modern driving demands. Whether you're navigating unfamiliar roads, streaming music, or simply keeping your phone out of your hand, the absence of CarPlay is a daily frustration for many Cayman owners. This PCM3.1 Wireless Apple CarPlay Adapter is engineered specifically for Porsche's factory system architecture. It integrates directly into your existing head unit, retaining all original controls — steering wheel buttons, screen, and interface logic — while adding full wireless Apple CarPlay, Android Auto, and Android Mirror-linking capability. There is no requirement to replace your factory system or drill any new holes. Designed as a true plug-and-play solution, the adapter connects via the factory harness and communicates over CAN-Bus, meaning it works seamlessly with your car's electronics. Once paired, your iPhone connects automatically every time you get in — no cable, no fuss. Siri voice control, real-time navigation, hands-free calling, Spotify, Waze, and more are all available at a touch or a word. What's Included 📦 CarPlay Adapter Module PCM3.1-specific, aluminium housing 🔌 Wiring Harness Factory-matched CAN-Bus connection 🎙️ External Microphone Required — replaces factory SOS-integrated mic 📡 Bluetooth Antenna Enables wireless iPhone pairing 🔧 Mounting Hardware Including screws for Sirius Radio-equipped vehicles 📋 Installation Guide Step-by-step printed instructions Product Highlights Wireless Apple CarPlay — iPhone connects automatically via Bluetooth, no cable required Wired CarPlay also supported for maximum stability when preferred Full Android Auto compatibility for Google Maps, Spotify, and more Android Mirror-linking to cast your Android screen to the factory display Retains all original steering wheel and dashboard button controls Siri voice control for completely hands-free operation while driving Supports aftermarket and OEM reverse or front camera integration Offline video and music playback via USB flash drive (up to 32GB) Airplay support for wireless HD video streaming from iOS devices Plug-and-play CAN-Bus integration — no permanent modifications to your Porsche Compatibility This adapter is designed for Porsche vehicles fitted with the PCM3.1 infotainment system. Compatibility requires a NAVI button on the control panel. Vehicles with a CD-AUX button only are not supported. Model Years System Fit Cayman 2010–2016 PCM3.1 Direct Fit Cayenne 2010–2016 PCM3.1 Direct Fit Macan 2010–2016 PCM3.1 Direct Fit Panamera 2010–2016 PCM3.1 Direct Fit Boxster 2010–2016 PCM3.1 Direct Fit 911 / 991 2010–2016 PCM3.1 Direct Fit 718 2010–2016 PCM3.1 Direct Fit Any model with CD-AUX only Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 45–90 minutes Confirm your vehicle has a NAVI button on the PCM3.1 control panel before beginning installation. Power down the vehicle and remove the factory PCM3.1 head unit from the dashboard using appropriate trim removal tools. Locate the factory harness connector on the rear of the head unit and connect the supplied wiring harness from the adapter module. Mount the adapter module in a suitable location behind the dashboard, ensuring adequate ventilation and no pinched cables. Route and connect the supplied external microphone to a discreet location on the A-pillar or sun visor area. Reinstall the head unit and trim panels, then power on the vehicle to verify the system initialises correctly. Pair your iPhone via Bluetooth — subsequent connections will be fully automatic and wireless. ⚠ Important: If your Porsche is equipped with Sirius Satellite Radio, additional mounting screws are required. Please notify us at the time of ordering and we will include them at no charge. The supplied external microphone must be used — the factory microphone cannot be retained due to its integration with the Porsche SOS emergency system. Upgrade Your Drive Your Porsche Cayman deserves a connected cockpit. This wireless CarPlay adapter brings modern smartphone integration to your PCM3.1 system without compromising the factory look or feel. Shop This Adapter Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Porsche AG, Apple Inc., or Google LLC. All brand names, model references, and trademarks are used for fitment identification purposes only. Always verify compatibility with your specific vehicle before purchase. Professional installation is recommended where required.

Porsche · Cayenne PCM3.1 · In-Car Technology Wireless Apple CarPlay Adapter for Porsche Cayenne 2010–2016 (PCM3.1) Bring wireless Apple CarPlay, Android Auto, and full mirror-linking to your Porsche PCM3.1 system — with zero permanent modifications and plug-and-play simplicity. Wireless CarPlay Android Auto PCM3.1 2010–2016 Plug & Play Siri Voice Control Reverse Camera Support Hands-Free Calling iOS & Android Aluminium Housing Overview The Porsche Cayenne built between 2010 and 2016 came equipped with the PCM3.1 infotainment system — a capable unit for its era, but one that was never designed for the smartphone-connected world we now live in. Navigation has moved on, streaming music is the norm, and hands-free communication is an expectation rather than a luxury. This adapter bridges that gap entirely. This PCM3.1 CarPlay retrofit module slots directly into your existing head unit via the Can-Bus interface, preserving your original steering wheel controls and factory buttons while unlocking wireless Apple CarPlay, wired CarPlay, Android Auto, and Android screen mirroring. There's no cutting of wires, no permanent alterations, and no compromise to your vehicle's existing functionality — just a clean, professional upgrade that feels like it should have been there from day one. Whether you're routing through Waze, streaming Spotify, making a hands-free call via Siri, or monitoring a reversing camera feed, this adapter handles it all through the screen you already have. The aluminium housing keeps heat dissipation efficient, and with iOS 9 or above supported — including all current iPhone models — compatibility is essentially universal. What's Included 📦 CarPlay Adapter Module PCM3.1-specific retrofit box, aluminium housing 🔌 Can-Bus Interface Harness Plug-and-play vehicle connection loom 🎙️ Dedicated Microphone Included to preserve SOS/factory mic compatibility 📡 Wireless Bluetooth Receiver For wireless iPhone pairing without USB 🔧 Mounting Hardware Installation screws and fixings included 📋 Installation Guide Step-by-step instruction sheet Product Highlights Wireless Apple CarPlay — connect iPhone without a cable via Bluetooth pairing Wired Apple CarPlay also supported for stable, low-latency connection Android Auto compatible — full Google Maps, Assistant & media access Android screen mirroring for full device display on the factory screen Original steering wheel controls fully retained via Can-Bus integration Supports front and reverse aftermarket camera feeds Siri voice control for hands-free navigation, calls, and messaging Offline video and music playback via USB flash drive (up to 32GB) HD video streaming via Airplay and Android Mirror-Link Supports Sirius Satellite Radio vehicles — contact us for fitment screws Compatibility Model Years System Fitment Porsche Cayenne 2010–2016 PCM3.1 Direct Fit Porsche Macan 2010–2016 PCM3.1 Direct Fit Porsche Panamera 2010–2016 PCM3.1 Direct Fit Porsche Cayman 2010–2016 PCM3.1 Direct Fit Porsche Boxster 2010–2016 PCM3.1 Direct Fit Porsche 911 / 991 2010–2016 PCM3.1 Direct Fit Porsche 718 2010–2016 PCM3.1 Direct Fit Vehicles with CD-AUX button (no NAVI) Any Non-PCM3.1 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Professional Fit Recommended Confirm your PCM head unit has a NAVI button on the control panel before beginning. If your vehicle only has a CD-AUX button, this product is not compatible. Remove the centre console trim panels to access the back of the PCM3.1 unit — refer to your vehicle-specific trim removal guide. Connect the Can-Bus interface harness from the adapter module to the corresponding port on the rear of the PCM3.1 unit. Route and connect the dedicated microphone to the adapter module, positioning it near the A-pillar or overhead console for best call quality. Secure the adapter module in a suitable location behind the dash using the included mounting hardware, ensuring adequate ventilation. Refit all trim panels, power on the vehicle, and follow the on-screen pairing instructions to connect your iPhone wirelessly via Bluetooth. ⚠ Important: If your vehicle is fitted with Sirius Satellite Radio, please contact us before installation. We will include the specific additional screws required to ensure a clean, secure fit. A dedicated microphone is included in the box as the factory microphone is integrated with the OEM SOS system and cannot be reused. Upgrade Your Porsche. No Compromise. Join over 12,300 verified customers who've transformed their driving experience with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS & TNT. Backed by our 30-day money-back guarantee. Shop All Upgrades Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide Shipping via DHL / FedEx ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Porsche AG or any of its subsidiaries. All vehicle model names, trademarks, and references are used for compatibility identification purposes only. Apple CarPlay is a trademark of Apple Inc. Android Auto is a trademark of Google LLC. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Defender L663 · Exterior Accessories Wind Deflector Guard for Land Rover Defender L663 110 & 130 (2020–2026) A precision-engineered ABS wind deflector guard purpose-built for the Defender L663, reducing cabin turbulence and wind noise while keeping fresh air circulating — no drilling required. Defender L663 110 & 130 2020–2026 High-Quality ABS Direct Fit No Drilling Peel & Stick Install Window Vent Visor Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle built for those who demand capability without compromise — a reborn icon engineered for both serious off-road use and refined everyday driving. Whether you're running the 110 five-door or the long-wheelbase 130 with its expanded passenger configuration, the Defender's architecture benefits enormously from thoughtful exterior upgrades that enhance comfort without altering its purposeful character. These wind deflector guards are designed from the ground up to complement the angular, utilitarian bodywork of the L663. Manufactured from high-quality ABS (Acrylonitrile Butadiene Styrene), they integrate seamlessly into the window channel of each door, creating a low-profile aerodynamic barrier that deflects wind, rain, and road spray away from the cabin aperture. The result is noticeably reduced wind noise at motorway speeds, the ability to crack windows open during light rain without soaking the interior, and improved airflow management for a more pleasant driving environment. Unlike bulkier aftermarket visors, these deflectors keep a clean, factory-adjacent aesthetic that doesn't compromise the Defender's bold visual presence. The finish is carefully matched to suit the L663's window surround, and because the fitment is handled entirely via a peel-and-stick adhesive system, there is no requirement for drilling, cutting, or permanent modification to your vehicle. Installation is clean, reversible, and achievable in under thirty minutes on your driveway. What's Included 🪟 Front Left Deflector Driver-side window vent visor, pre-cut for L663 front door 🪟 Front Right Deflector Passenger-side window vent visor, pre-cut for L663 front door 🪟 Rear Left Deflector Rear driver-side visor, shaped for L663 rear door profile 🪟 Rear Right Deflector Rear passenger-side visor, shaped for L663 rear door profile 🔧 Adhesive Tape Strip Set Pre-applied 3M-grade double-sided tape on each deflector 📋 Installation Guide Step-by-step illustrated fitting instructions included Product Highlights Precision-cut for Land Rover Defender L663 110 and 130 body dimensions High-quality ABS construction — resistant to UV, heat, and impact Reduces wind noise and cabin turbulence at motorway speeds Allows windows to remain cracked open during light rain without water ingress Low-profile design preserves the Defender's bold, factory aesthetic No drilling, no cutting — fully non-invasive peel-and-stick installation Pre-applied 3M-grade adhesive tape for a secure, long-term bond Compatible with both standard and optional window glass configurations Improves interior ventilation, reducing reliance on air conditioning 100% brand new — supplied as a complete four-piece set for all main doors Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 130 L663 2020–2026 Long-Wheelbase SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Verify Before Purchase Defender 110 (Pre-2020) L316 Pre-2020 Classic Utility Not Compatible Range Rover Sport L461 / L494 Various 5-Door SUV Not Compatible Range Rover Vogue L460 / L405 Various 5-Door SUV Not Compatible Installation Notes ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Difficulty: Easy — No Tools Required Clean the window channel: Thoroughly clean the door frame and window surround with an isopropyl alcohol wipe. Remove all wax, polish, and dust residue. Allow to dry completely before proceeding. Dry-fit each deflector: Hold each deflector against the window channel without removing the tape backing. Confirm the profile aligns correctly with the door frame top rail before committing to placement. Peel and position: Remove the adhesive tape backing from the deflector. Starting at one end of the channel, carefully press the deflector into position, working gradually along its length to avoid bubbles or misalignment. Apply firm pressure: Once positioned, press firmly along the entire length of the deflector for 30–60 seconds to activate the adhesive bond. Pay particular attention to the ends and any curved sections. Cure time: Allow a minimum of 24 hours before operating the windows at high speed or washing the vehicle, to allow the adhesive to fully cure against the door surface. Repeat for all four doors: Follow the same process for each deflector in sequence — front left, front right, rear left, rear right — cross-referencing the fitting guide for any door-specific orientation notes. ⚠ Important: Do not attempt installation in temperatures below 5°C or in direct sunlight on a hot day, as extreme temperatures can affect adhesive performance. If your Defender has been previously fitted with aftermarket window tint or sealant near the channel area, clean thoroughly to ensure a clean bonding surface. If unsure about compatibility with your specific build variant, please contact our team before purchasing. Upgrade Your Defender L663 Today Every detail matters on a Defender. These wind deflector guards are a clean, functional upgrade that improves daily usability without compromising the vehicle's character. Browse our full range of Defender L663 exterior accessories and find everything your Land Rover deserves — all in one place. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Defender, L663, and Land Rover) are the property of their respective owners and are used solely for fitment identification and compatibility reference purposes. Please verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Range Rover Velar · Exterior Protection Headlamp Tint Pre-Cut Film – Range Rover Velar 2018–2020 Precision pre-cut TPU headlamp tint film engineered to protect and transform the front lighting signature of your Range Rover Velar — available in Blackened Smoke or Crystal Clear. Range Rover Velar 2018–2020 Top TPU Material Self-Healing Scratch Resistant Blackened & Clear Pre-Cut Fit 2-Piece Kit Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — its flush LED headlamps and sleek frontal architecture are central to its visual identity. Keeping those headlamp lenses in pristine condition against stone chips, road debris, UV degradation and daily wear is something every Velar owner should prioritise from day one. This pre-cut headlamp tint film is manufactured from premium Top TPU — the same grade of thermoplastic polyurethane used in professional paint protection applications. Unlike adhesive vinyl films, TPU is optically clear at a molecular level, meaning light output is never compromised. The self-healing surface actively closes minor swirl marks and surface abrasions when exposed to heat, keeping the film looking factory-fresh for years. Available in two finishes — Blackened Smoke for a blacked-out, stealth aesthetic that complements the Velar's already dramatic lines, and Crystal Clear for invisible protection that maintains the OEM look — both options are precision pre-cut to the exact headlamp contours of the 2018–2020 Range Rover Velar, ensuring a seamless, bubble-free install with no trimming required. What's Included 💡 Headlamp Tint Film × 2 Pre-cut left & right panels for the Velar headlamps 🛠️ Application Tool Kit Included as a gift to assist with installation 📋 Installation Guide Step-by-step instructions for a clean finish 🎨 Choice of Finish Blackened Smoke or Crystal Clear — select at checkout Product Highlights Precision pre-cut for the Range Rover Velar 2018–2020 — no trimming needed Top-grade TPU material — flexible, durable and optically superior Self-healing surface technology — minor scratches disappear with heat Scratch and abrasion resistant — protects against stone chips and road debris UV-stabilised formula — prevents lens yellowing and hazing over time Available in Blackened Smoke for a stealth look or Crystal Clear for OEM finish Maintains full headlamp light output — zero optical interference Bubble-free adhesive backing — clean, professional finish every time Residue-free removal — will not damage or stain OEM headlamp lenses Includes application tools — everything you need in one package Vehicle Compatibility Vehicle Year Range Fitment Range Rover Velar 2018–2020 Direct Fit Range Rover Velar 2017 Direct Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Vogue L405 2018–Present Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport L494 2018–Present Direct Fit Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Direct Fit Discovery Sport L550 2016–Present Direct Fit Range Rover Sport L461 2022–Present Verify Before Purchase Range Rover Vogue L460 2022–Present Verify Before Purchase Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Professional Tools Required Thoroughly clean the headlamp lens surface with an isopropyl alcohol solution and allow to dry completely — any dust or grease will affect adhesion. Work in a warm, dust-free environment. A garage or sheltered area at 15–25°C is ideal. Warmer conditions improve film flexibility and conformity. Lightly mist the headlamp surface with a water and soap solution (wet application method) to allow repositioning during placement. Carefully peel the backing from the pre-cut TPU film, keeping the adhesive side away from surfaces. Align the film to the headlamp contour before committing. Apply the film from the centre outward using the included squeegee tool, working any air bubbles towards the edges progressively. Use a heat gun or hairdryer on a low setting to gently warm the film around curves and edges — this improves adhesion and conformity to complex shapes. Allow 24–48 hours for the adhesive to fully cure before washing the vehicle or exposing the film to heavy rain. ⚠ Note: Ensure the headlamp surface is completely free of wax, polish or ceramic coating residue before application. Residual coatings will significantly reduce adhesive bond strength and may cause lifting at the edges. If your lenses have been previously coated, lightly decontaminate with a clay bar or isopropyl wipe before fitting. Complete Your Velar Build Explore the full Victorious range of Range Rover Velar accessories — from interior refinements to exterior protection — curated exclusively for owners who refuse to compromise. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant before purchasing.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Head Pillow Adjustment Button Cover Trim for Land Rover Defender 90 & 110 L663 (2020+) A precision-cut chrome accent trim that transforms the headrest adjustment controls of your Defender into a cohesive, premium detail — the finishing touch every thoughtfully specified interior deserves. Defender L663 2020+ ABS Chrome Direct Fit No Drilling Interior Trim Silver / Chrome ISO9001 Certified Model LLK2620 Overview The Land Rover Defender L663 is a vehicle that rewards attention to detail. From its purposeful exterior stance to its carefully considered interior layout, every surface contributes to the overall experience. But even from the factory, there are small opportunities to elevate — areas where a considered upgrade elevates the cabin from functional to genuinely refined. The headrest adjustment button surround is one of those moments. Factory-spec, it can look purely utilitarian against an otherwise well-appointed interior. This ABS Chrome Head Pillow Adjustment Button Cover Trim is engineered to address exactly that — cladding the button surround in a polished chrome-finish ABS fascia that harmonises with the metallic accents already present throughout the Defender's cabin architecture. Manufactured to ISO9001 quality standards and constructed from high-grade ABS, this trim is designed for durability as much as aesthetics. Installation requires no tools and no modification — a clean, confident upgrade that any Defender owner can complete in minutes, with results that look entirely factory-fitted. What's Included 🪞 Chrome Button Cover Trim x1 — ABS chrome-finish headrest adjustment surround 🔧 Automotive Adhesive Tape Pre-applied — strong bond, clean removal if needed 📄 Installation Guide Step-by-step fitment reference included Product Highlights Polished chrome ABS finish that mirrors factory metallic cabin accents Precision-cut for seamless integration with Defender 90 & 110 L663 headrests High-grade ABS construction — resistant to UV fading and cabin heat Pre-applied automotive-grade adhesive for a clean, tool-free install ISO9001 certified manufacturing for consistent quality assurance Lightweight at 200g — no impact on headrest function or adjustment Silver chrome colour complements both dark and light interior themes No drilling, cutting, or permanent modification required Instantly elevates the perceived quality of the rear and front headrest area Compatible with both Defender 90 and Defender 110 L663 variants Compatibility Model Variant Year Range Fitment Land Rover Defender 110 L663 — All Trims 2020 – 2026 Direct Fit Land Rover Defender 90 L663 — All Trims 2020 – 2026 Direct Fit Land Rover Defender 130 L663 — All Trims 2022 – 2026 Verify Before Ordering Range Rover Sport L494 All 2013 – 2022 Not Compatible Range Rover Vogue L405 All 2013 – 2021 Not Compatible Range Rover Velar All 2018 – 2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked and the interior at ambient temperature — avoid installation in extreme cold or direct sunlight, as this affects adhesive performance. Thoroughly clean the headrest adjustment button surround area using an isopropyl alcohol wipe. Remove all dust, oils, and residue. Allow to dry completely for at least 60 seconds. Dry-fit the chrome trim cover to the button surround before committing — confirm alignment, orientation, and clearance around the adjustment button itself. Peel back the protective film from the pre-applied adhesive tape on the reverse of the trim piece. Carefully align the trim to the surround and apply firm, even pressure for 30–60 seconds across the entire surface to activate the adhesive bond. Allow a minimum of 2 hours before applying any cleaning products to the area. Full adhesive cure is achieved after 24 hours. ⚠ Important: The automotive adhesive is strong and placement is largely permanent once bonded. Take your time with alignment during the dry-fit stage. Do not attempt to forcibly remove the trim after bonding, as this may affect the underlying surface finish. Complete Your Defender Interior This trim is part of a wider collection of precision interior upgrades designed exclusively for the Defender L663. Every piece is selected to integrate seamlessly — so your cabin looks considered, not modified. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Chrome Gear Shift Surround Trim for Land Rover Defender 110 L663 (2020–2026) A precision-formed chrome accent that frames the Defender 110's gear selector surround with a clean, upmarket finish — transforming one of the most-touched areas of the cabin without a single tool. Defender L663 2020–2026 Chrome-Plated Interior Trim Gear Shift Surround No-Tool Fit Direct Fit Peel & Stick Overview The 2020-onward Land Rover Defender 110 L663 represents a bold reimagining of one of the most iconic 4x4s ever built. Its interior is a purposeful blend of utilitarian design and modern technology — but for owners who want to push the cabin's visual quality a step further, the factory plastic surrounding the gear selector can feel like an opportunity left on the table. This Chrome Gear Shift Surround Trim is engineered specifically to the L663 Defender 110's centre console geometry. The chrome-plated surface catches the ambient light beautifully, drawing the eye toward the gear selector area and adding a layer of premium detail that reads as OEM-quality rather than aftermarket. It sits flush against the factory surround with no raised edges, gaps, or misalignment — because it was designed for exactly this vehicle, not adapted from a generic template. For Defender owners who have already upgraded their door handles, steering wheel trim, or dashboard accents, this piece completes the chrome accent language across the console. It's the kind of detail that's immediately noticeable to anyone who knows the Defender interior well — and entirely invisible to anyone who doesn't. What's Included 🪄 Chrome Gear Shift Surround Trim 1 × pre-formed chrome-plated trim piece, L663-specific profile 🔧 Installation Instructions Step-by-step guide for a clean, confident fit first time 🩹 Pre-Applied Adhesive Backing Industrial-grade 3M-style tape already applied to reverse face 🧤 Protective Packaging Chrome surface protected during transit to prevent scuffs Product Highlights Precision-cut to match the exact L663 Defender 110 gear surround profile High-gloss chrome-plated ABS plastic — durable and resistant to daily wear Pre-applied industrial adhesive backing for a clean, tool-free installation Flush-mounted fit with no visible gaps, overhang, or lifting edges Complements existing chrome or brushed accents throughout the L663 cabin Resistant to UV fading and interior temperature fluctuations Fully reversible — removes cleanly without damaging factory plastic Adds a premium visual focal point to the centre console area Lightweight construction — no added weight or interference with gear operation Designed and quality-checked for the Defender 110 L663 specifically Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Ensure the vehicle is parked, ignition off, and the gear selector is in Park (P). Allow the centre console to reach room temperature if the vehicle has been parked in cold conditions. Thoroughly clean the factory gear shift surround with an isopropyl alcohol wipe. Remove all dust, oils, and residue. Allow the surface to dry completely before proceeding — this is the single most important step for long-term adhesion. Dry-fit the chrome trim piece over the surround without removing the adhesive backing. Confirm alignment and check that all edges sit flush against the factory plastic. Peel the protective film from the adhesive backing. Starting from one end, carefully position the trim piece and press it firmly into place using the heel of your palm. Work from the centre outward to prevent air pockets. Apply firm, sustained pressure across the entire trim surface for 30–60 seconds. Pay particular attention to the corners and edges. Allow the adhesive to cure undisturbed for a minimum of 1 hour before normal use. Full bond strength is achieved after 24 hours. ⚠ Note: Do not apply in temperatures below 10°C (50°F) as this reduces adhesive performance. Avoid cleaning the trim with solvent-based products after installation — a damp microfibre cloth is sufficient for ongoing maintenance. Complete Your Defender 110 Interior This trim pairs perfectly with our full range of Defender L663 interior accessories — from door handle surrounds to dashboard accent sets. Explore the complete collection and build the cabin your Defender deserves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and Defender vehicles. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR) or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment and compatibility identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Silver Aluminum Alloy Air Conditioning & Audio Control Knobs Trim — Land Rover Defender 110 (2020) A precision-machined aluminium upgrade that replaces the factory plastic knobs with a refined, tactile finish that suits the Defender's rugged-yet-premium character. Defender L663 2020 Model Year Aluminum Alloy Silver Finish AC Knobs Audio Control Trim Direct Fit No Drilling Required Overview The 2020 Land Rover Defender 110 (L663) marked a watershed moment for the nameplate — a thoroughly modern reinterpretation of an icon, built around a premium interior that blends utilitarian durability with genuine luxury. The centre console and climate control panel occupy a commanding position in the cabin, and the quality of every surface you touch directly shapes how the space feels on long drives and off-road adventures alike. These Silver Aluminum Alloy Air Conditioning and Audio Control Knobs Trim pieces are engineered as a direct-fit replacement for the 2020 Defender 110. Machined from high-grade aluminium alloy and finished in a clean, brushed silver, they bring a noticeably more substantial, purposeful feel to the controls you interact with every time you adjust your climate or audio settings. Where the factory plastic can feel at odds with the rest of the cabin's premium ambition, these knobs close that gap with minimal effort. Installation requires no cutting, drilling, or specialist tools — the trim is designed to locate precisely onto the existing control stalks and secure without modification. For Defender owners who appreciate their vehicle and want every detail to reflect that, this is one of the most satisfying interior upgrades available for the money. What's Included 🔩 AC Control Knobs Trim Full set, silver aluminium alloy finish 🎚️ Audio Circle Trim Rings Matching finish for audio control interface 📦 Protective Packaging Securely packed to prevent transit damage 📋 Fitment Guide Basic installation reference included Product Highlights Precision-machined from high-grade aluminium alloy for lasting durability Brushed silver finish complements the Defender 110's premium interior palette Direct-fit design engineered specifically for the 2020 Defender L663 Replaces factory plastic with a noticeably more premium, tactile feel No drilling, cutting, or permanent modifications required Resistant to wear, heat, and UV fading from daily use Lightweight aluminium construction — adds no meaningful weight to controls Manufactured to international quality standards for consistent finish Fully covers existing control bases for a clean, factory-integrated look 100% brand new — not refurbished or remanufactured Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020 Direct Fit Land Rover Defender 90 L663 2020 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 15–30 Minutes  |  🔧 Tools Required: None Ensure your Defender 110 is switched off and the interior is at ambient temperature before beginning. Carefully examine the existing factory plastic knobs on your AC and audio control panel to familiarise yourself with their position and orientation. Gently grip the factory knob and pull firmly but evenly away from the panel to release it from the control shaft. Do not twist — pull straight out. Align the new aluminium alloy knob trim with the corresponding shaft, ensuring correct orientation for any directional markers. Press the new knob firmly and evenly onto the shaft until it seats securely and sits flush against the panel surface. Repeat for all remaining knobs in the set, then test each control for smooth, full-range operation before completing. ⚠; Please Note: This product is listed as a confirmed direct fit for the 2020 Land Rover Defender 110 (L663). If you own a Defender 90, Defender 130, or a different model year, please verify compatibility with our team before purchasing. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment for your specific vehicle. Complete Your Defender Interior These knobs are just the start. Explore our full range of Defender L663 interior upgrades — from gear selector surrounds to dashboard trim — all designed to the same standard of fit and finish. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. Vehicle model names, codes, and trademarks are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle before installation.

Victorious · Universal · Interior Comfort Car Seat Headrest Neck Rest Cushion – Premium Memory Foam Support Transform your daily commute with ergonomic neck support designed for long-distance comfort and reduced fatigue. Universal Fit Memory Foam Neck Support Car Interior Portable Overview Whether you're driving your Range Rover Sport L461 across challenging terrain or settling in for a long motorway journey, neck fatigue and poor posture can quickly undermine your comfort and focus. The Car Seat Headrest Neck Rest Cushion is engineered to provide targeted cervical support, reducing strain during extended drives and making every journey more enjoyable. Built with premium memory foam technology and wrapped in soft PU/cloth upholstery, this headrest cushion conforms to your neck's natural contours. The synthetic fibre filling ensures lasting durability and washable convenience—ideal for the demands of daily automotive use and long expeditions. Installation is instantaneous: simply position over your existing headrest. No tools, no modifications, no fuss. Perfect for Land Rover Defenders, Range Rovers, Discovery models, and any vehicle where comfort matters. What's Included 🛫 1x Headrest Cushion Premium memory foam, ready to install Product Highlights Memory foam contours to your neck shape for personalised support PU/cloth and synthetic fibre construction for durability and comfort Universal fit—works with any standard vehicle headrest Washable cover for easy maintenance and long-term hygiene Reduces cervical strain on long drives and daily commutes Lightweight and portable—take it between vehicles if needed Enhanced cabin ergonomics without permanent modification Breathable fabric minimises heat buildup during summer drives Affordable upgrade for Range Rover, Defender, Discovery, and Evoque owners Backed by Victorious' 30-day money-back guarantee Compatibility Vehicle Status Range Rover Sport L461 (2022–2026) Direct Fit Range Rover Vogue L460 (2022–2026) Direct Fit Defender L663 (2020–2026) Direct Fit Range Rover Vogue L405 (2013–2020) Direct Fit Range Rover Sport L494 (2013–2020) Direct Fit Range Rover Velar (2018–2022) Direct Fit Land Rover Discovery 5 (2017–Present) Direct Fit Land Rover Discovery Sport (2015–Present) Direct Fit Range Rover Evoque L551 (2019–Present) Direct Fit Toyota Land Cruiser LC300 / LC250 Direct Fit Mercedes G-Class (All Generations) Direct Fit Jaecoo J7 Direct Fit All Other Vehicles with Standard Headrests Compatible Installation ⏱ Difficulty: Beginner | Time: 2 minutes Remove the cushion from packaging and inspect for any damage. Locate your vehicle's existing headrest—usually on the driver or passenger seat back. Slide the neck rest cushion cover over the top of the headrest, ensuring even coverage on both sides. Adjust the cushion height and angle to suit your preferred neck support position. Sit back and enjoy enhanced comfort on your next journey. Note: This cushion is designed to fit standard OEM headrests. If your vehicle has oversized or non-standard headrests, measure the headrest width (typically 25–35 cm) before ordering. For custom fitment queries, contact our team on +44 203 943 9919. Elevate Your Comfort Today Long drives shouldn't mean neck pain. Our premium headrest cushion has transformed the comfort of thousands of Land Rover and Range Rover owners. Experience the difference memory foam support can make on your next expedition—or your daily school run. Add to Basket Use code 22GET20 for 20% off any 2 items ✓ 30-day money-back guarantee ✓ 4.9/5 stars from 12,300+ reviews ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ UK support: +44 203 943 9919 Victorious Automotive is an independent aftermarket supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), Toyota, Mercedes-Benz, or any OEM manufacturer. Product names and vehicle codes are used for compatibility and identification purposes only. All trademarks are the property of their respective owners.

Victorious · Defender 90/110 · Exterior Protection Front Bumper U Bar Bull Bar Cover for Land Rover Defender 90 110 Heavy-duty polypropylene bull bar combining rugged protection with refined aesthetics for classic and modern Defenders. Defender 90 Defender 110 1990–2016 Polypropylene Direct Fit Off-Road Ready Overview The Land Rover Defender 90 and 110 are workhorses that demand equally capable protection. Whether you're traversing challenging terrain or navigating urban environments, the front fascia faces constant exposure to impacts, debris, and weathering. A proper bull bar isn't just cosmetic—it's essential infrastructure for your vehicle. This front bumper U bar and cover assembly delivers both. Engineered from high-quality polypropylene, it provides genuine impact protection while maintaining clean, proportional design language that complements the Defender's classic proportions. The integrated U-channel structure distributes force across a wider contact area, reducing localized damage to the chassis. Installation is straightforward with included mounting hardware. The design accounts for factory bumper integration, meaning no permanent modifications to your Defender. It's the kind of accessory that looks like it should have been factory-fitted from day one. What's Included 🛡️ Front Bumper Cover Complete polypropylene assembly 🔧 U Bar Structure Integrated protective channel ⚙️ Mounting Hardware Stainless fasteners and brackets 📋 Fitting Instructions Step-by-step installation guide Product Highlights Precision-engineered for Defender 90 and 110 fitment Durable polypropylene resists UV, salt, and impact Integrated U bar design maximises structural strength Bolt-on installation—no welding required Factory-style integration with minimal aesthetic compromise Protects radiator, cooling system, and chassis from frontal impacts Lightweight design does not compromise fuel economy Compatible with standard accessory mounting points Weather-resistant finish maintains appearance long-term Cost-effective alternative to chassis damage repair Compatibility Model Year Fitment Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 90 (2020–2026) 2020–2026 Not Compatible Defender 110 (2020–2026) 2020–2026 Not Compatible Installation Notes Difficulty: Easy | Time: 45–90 minutes Ensure vehicle is on a level surface with engine off and cooled. Remove the factory bumper cover by unbolting fasteners (8–12 bolts depending on year). Position the new U bar assembly against the front chassis, aligning mounting holes with factory points. Install provided stainless steel fasteners, tightening in a cross pattern for even pressure. Verify all attachment points are secure; bump test the assembly gently before driving. Inspect fitment around edges for gaps; minor adjustment may be required. Note: If your Defender has been modified with a non-standard suspension or bumper height, test fitment before fully securing. Some winch-equipped vehicles may require spacer modification. Why Victorious This bull bar represents the kind of thoughtful engineering you expect from Victorious. We source materials that survive UK weather and tough off-road environments. Every Defender owner who has chosen our accessories knows that quality protection doesn't mean compromising on style—and this front bumper assembly proves it. Protect Your Defender Quality front protection is an investment in longevity. Add this U bar assembly to your Defender today and drive with confidence. Shop Defender Exterior Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or any official manufacturer. All vehicle names and trademarks are property of their respective owners. Product compatibility is based on standard factory specifications; modifications to your vehicle may affect fitment.

Victorious · Defender 90/110 · Exterior Quad Lights Front Bumper with LED Lights for Land Rover Defender 90 110 Premium stainless steel front bumper with integrated quad LED lights, designed to enhance protection and visibility on your classic Defender. Defender 90/110 1990–2016 Stainless Steel LED Lights Twin Style Option Overview The Land Rover Defender 90 and 110 remain iconic workhorses—rugged, purposeful, and built to endure. This Quad Lights Front Bumper is engineered to match that heritage while adding contemporary protection and visibility. Whether you're navigating rough terrain or urban environments, this bumper shields your vehicle's front end while its integrated LED lighting system ensures you're seen, day or night. Constructed from premium stainless steel, this bumper resists rust and corrosion in extreme conditions. The quad LED light arrangement delivers superior illumination without the weight or complexity of aftermarket light bars, maintaining the Defender's authentic aesthetic while improving safety and functionality. Two style variants are available, allowing you to choose the configuration that best suits your driving demands. Each bumper is precision-engineered for direct fitment to both Defender 90 and 110 chassis, requiring no cutting or modification. What's Included 🛡️ Front Bumper Assembly Stainless steel construction, one piece 💡 Quad LED Light Units Integrated, warm white output 🔧 Hardware Kit Stainless fasteners and brackets included 📖 Installation Guide Step-by-step instructions with diagrams Product Highlights Stainless steel construction resists rust, salt, and harsh UV exposure Integrated quad LED lights for enhanced visibility and modern styling Direct fit for Defender 90 and 110 (1990–2016 models) Two style configurations to match your aesthetic preference Increased ground clearance and approach angle protection All mounting hardware and fasteners supplied Professional-grade welding and finishing LED light units are fully weatherproof and sealed No modification required to vehicle frame or wiring harness Maintains authentic Defender proportions and character Compatibility Model Year Range Fit Status Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2016 Not Compatible Defender L663 2020–2026 Not Compatible Discovery Series All Not Compatible Installation Notes Difficulty Level: Moderate | Time: 2–3 hours Support vehicle safely on ramps or jack stands. Ensure engine is cold. Remove existing front bumper by unbolting fasteners at mounting points (8–10 bolts). Disconnect wiring harness from factory lights and trim panel clips. Align new Quad Lights bumper with frame mounting brackets. Insert and hand-tighten all fasteners before final torque (12–14 Nm per bolt). Connect LED light wiring to vehicle's auxiliary power circuit or relay module (recommended: professional installation for electrical). Test all lights and perform final visual inspection before lowering vehicle. Important: LED light wiring should be installed by a qualified automotive electrician to ensure proper grounding and prevent short circuits. Factory wiring may require a relay or dedicated circuit breaker. Ready to Upgrade Your Defender's Front End? This Quad Lights Front Bumper combines classic Defender aesthetics with modern safety and lighting technology. Protect your investment while standing out on the road or trail. Add to Cart Use code 22GET20 for 20% off when you buy any 2 accessories. 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx ✓ Call +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket supplier. We are not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for aftermarket use only.

Victorious Automotive · Defender L663 · Loadspace Trim Black Stainless Steel Loadspace Treadplate – Land Rover Defender 110 L663 (2020–2026) A precision-formed black stainless steel loadspace treadplate that protects the Defender 110's rear sill from daily wear while delivering a purposeful, finished aesthetic worthy of the L663's character. Defender L663 110 Wheelbase 2020–2026 Black Finish Stainless Steel Loadspace Protection Model: LLK2605 ISO9001 Certified No Drilling Required Overview The Land Rover Defender L663 110 was built to work as hard as it looks — and no area of the vehicle bears the brunt of daily use more than the loadspace sill. Whether you're loading gear for an overland trip, hauling dogs and kit across rural terrain, or simply using the Defender the way it was intended, that rear aperture takes a constant battering from boots, cargo, and equipment. This Black Loadspace Treadplate has been engineered specifically for the 2020-onwards Defender 110 L663 to sit flush against the rear load sill, providing a protective layer of high-grade stainless steel between your vehicle's body and the inevitable scuffs and scratches that come with ownership. The satin black finish is not simply a coating — it complements the Defender's bold lines and dark exterior trim options with a cohesive, factory-integrated appearance. Constructed to ISO9001-certified manufacturing standards and finished with automotive-grade adhesive tape backing, this treadplate installs cleanly without modification, drilling, or specialist tools. It's the kind of upgrade that rewards the detail-oriented owner — subtle enough to look deliberate, durable enough to last the life of the vehicle. What's Included 🪛 Loadspace Treadplate × 1 Black stainless steel, model LLK2605 🔧 Adhesive Tape Pre-Applied Automotive-grade backing for secure fit 📄 Installation Guide Step-by-step fitment instructions Product Highlights Purpose-engineered for the Defender 110 L663 loadspace sill profile High-grade stainless steel construction for lasting durability Satin black finish complements dark trim and exterior details ISO9001-certified manufacturing process for quality assurance No drilling, cutting, or modification to original bodywork required Automotive adhesive tape backing for a clean, bonded installation Protects against scuffs, scratches, and boot marks at the load sill Dimensions: 70cm (L) × 15cm (W) × 10cm (H) — 300g total weight Retains the Defender's working aesthetic without looking aftermarket Reversible installation — preserves original finish beneath Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Land Rover Defender (Original) L316 Pre-2016 Not Compatible Range Rover Sport L494 / L461 All Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Open the Defender 110's tailgate fully to expose the rear load sill area and gain clear access to the fitment surface. Thoroughly clean the sill surface using an isopropyl alcohol wipe or panel prep solution, removing all dirt, grease, wax, and residue. Allow to dry completely — this step is critical for adhesion performance. Dry-fit the treadplate against the sill to confirm alignment and positioning before removing the adhesive backing. Peel back the adhesive tape liner from the rear of the treadplate, taking care not to touch the adhesive surface. Starting from one end, carefully press the treadplate firmly into position along the sill, applying consistent pressure across the entire length for 30–60 seconds. Apply firm thumb pressure across all edges and corners to ensure full contact and eliminate any lifting points. Allow a minimum of 2–4 hours cure time before loading the vehicle or exposing the sill to moisture. ⚠ Important: Do not install in temperatures below 10°C / 50°F as adhesive performance may be compromised. Avoid washing the vehicle for 24 hours after installation to allow full bond strength to develop. Complete Your Defender's Interior Explore our full range of Defender L663 interior upgrades — from door sill plates and dashboard trim to loadspace liners and grab handle covers. Every product is selected for fit, finish, and long-term quality. Shop Defender 110 L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. "Defender" and "Land Rover" are registered trademarks of Jaguar Land Rover Limited.

Victorious Automotive · Defender L663 · Interior Trim ABS Chrome Rear Trunk Trailer Button Frame Trim for Land Rover Defender 110 L663 (2020+) A precision-formed chrome frame trim that elevates the Defender 110's rear loading area with a polished, factory-coherent finish — fitted in minutes, no tools required. Defender L663 2020–2026 ABS Chrome Trailer Button Frame Rear Trunk Trim 3 Colour Options Adhesive Fit ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that demands accessories worthy of its character — purposeful, considered, and built to last. Every detail on the Defender has been resolved with intent, and the area surrounding the rear trunk trailer button is no exception. Left unfinished from the factory, it's a small but visible detail that enthusiast owners notice. This Rear Trunk Trailer Button Frame Trim is designed exclusively for the 2020-onwards Defender 110 L663. Formed from high-grade ABS and finished in either Pearl Chrome, Silver, or Oak Wood Grain, it frames the trailer coupling button recess with a clean, layered look that integrates naturally with the Defender's existing interior trim language. The result is a rear loadspace that looks considered from every angle — even when the tailgate is open and your kit is loaded. At just 17g, this trim adds zero meaningful weight while delivering a noticeable visual upgrade. The automotive-grade adhesive backing ensures a secure, rattle-free bond to the factory panel surface. If you're building out your Defender's interior to the standard it deserves, this is one of those small pieces that makes the whole look cohesive. What's Included 🔲 Rear Trunk Trailer Button Frame Trim 1 piece · ABS Chrome finish · pre-taped 🔧 Automotive Adhesive Tape Pre-applied to reverse face · strong bond 📋 Installation Guide Step-by-step fitment reference included Product Highlights Designed exclusively for the Land Rover Defender 110 L663 (2020 onwards) High-grade ABS construction — resistant to warping, UV, and temperature change Available in Pearl Chrome, Silver, and Oak Wood Grain finishes Pre-applied automotive adhesive tape for a clean, tool-free installation ISO9001 certified manufacturing — consistent quality across every unit Lightweight at just 17g — no structural or weight implications whatsoever Precise fitment to the factory trailer button recess — no trimming required Rattle-free bond when correctly applied to a clean, dry panel surface Complements other chrome or wood grain interior trim on the L663 100% brand new — not a refurbished or repackaged item Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Open the Defender 110 tailgate fully and locate the trailer coupling button recess on the rear interior panel. Thoroughly clean the panel surface around the button recess using an isopropyl alcohol wipe or similar degreaser. Allow to dry completely — adhesion depends on a clean, grease-free surface. Test-fit the trim piece without removing the adhesive backing to confirm alignment and positioning before committing. Peel the adhesive backing from the reverse of the trim piece carefully, ensuring the tape remains flat and undistorted. Align the trim precisely over the button recess and press firmly from the centre outward, applying sustained pressure for 30–60 seconds across the full surface. Allow the adhesive to cure for a minimum of 24 hours before exposing to moisture, extreme temperatures, or heavy use. ⚠ Note: Confirm fitment compatibility with your specific Defender variant before purchase. The button recess geometry may differ between 90, 110, and 130 body styles. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm before you order. Complete Your Defender's Interior This trim is one part of a wider collection of Defender L663 interior accessories at Victorious. Browse the full range — from door handle surrounds to dashboard bezels — all held to the same standard your Defender deserves. Shop Defender L663 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Defender L663 · Interior Trim Left-Hand Drive ABS Black Interior Window Lifter Switch Trim for 2020 Land Rover Defender 110 A precision-formed ABS black switch surround that refines the door panel aesthetic of the 2020 Defender 110 — clean lines, factory-level fitment, zero compromise. Defender L663 2020 Model Year Left-Hand Drive ABS Black Window Lifter Switch Trim Interior Trim No-Drill Install ISO9001 Certified Overview The 2020 Land Rover Defender L663 was a complete reimagining of one of the most iconic vehicles ever made — bold, capable, and designed with an interior that finally matched its exterior ambition. Yet for owners who want every detail to feel intentional, the door panel window lifter switch area is one of those subtle surfaces that benefits enormously from a well-fitted trim overlay. It's a small change that shifts the feel of the entire door card. This ABS Black Window Lifter Switch Trim is engineered specifically for the Left-Hand Drive Defender 110 (2020 onwards), offering a snug, factory-matched surround for the window control switch cluster. Formed from high-grade ABS material and finished in a clean gloss black, it integrates seamlessly with the Defender's existing interior language — adding definition without distraction. At 29cm long and weighing just 148g, the trim is lightweight yet rigid, built to resist flex, temperature variation, and daily door use without lifting or fading. Installation requires no tools, no drilling, and no professional fitting — automotive-grade adhesive tape is pre-applied, meaning this is a genuine weekend upgrade that takes minutes and lasts years. Whether you're building out a full interior refresh or simply want a more considered finish on your Defender's door panels, this trim is exactly the kind of detail-oriented accessory that separates a standard Defender from a truly personal one. What's Included 🪟 Window Lifter Switch Trim 1× full set — LHD Defender 110 fitment 🔧 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant backing 📄 Fitting Guide Step-by-step installation instructions included 📦 Protective Packaging Secure box — arrives scratch-free, ready to fit Product Highlights Precision-engineered for Left-Hand Drive Defender 110 (2020) — exact fitment, no gaps Premium ABS construction — rigid, lightweight, and resistant to daily wear Gloss black finish — complements both dark and light Defender interior colour packs ISO9001 certified manufacturing — consistent quality control at every stage No-drill, no-cut installation — adhesive-backed for a clean, reversible fit Dimensions: 29cm × 12cm × 4cm — purpose-sized for the LHD switch panel Weighs just 148g — no added bulk or door panel stress Heat and UV stable — maintains finish in all climates Compatible with Defender 110 standard and specification variants (LHD, 2020) Pairs with other Victorious Defender L663 interior trim pieces for a cohesive upgrade Compatibility Vehicle Year Drive Body Style Fit Land Rover Defender 110 (L663) 2020 Left-Hand Drive 110 (5-door) Direct Fit Land Rover Defender 130 (L663) 2020 Left-Hand Drive 130 (Extended) Direct Fit Land Rover Defender 90 (L663) 2020 Left-Hand Drive 90 (3-door) Verify Before Purchase Land Rover Defender 110 (L663) 2020 Right-Hand Drive 110 (5-door) Not Compatible Land Rover Defender (Pre-2020 / Classic) Pre-2020 Any Any Not Compatible Range Rover Sport / Vogue / Velar Any Any Any Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔩 Tools Required: None Begin with the vehicle parked and the door panel at room temperature. Avoid fitting in direct sunlight or extreme cold, as this affects adhesive performance. Thoroughly clean the window lifter switch surround area using an isopropyl alcohol wipe or panel prep solution. Remove all dust, grease, and residue. Allow to dry completely — this step is critical for long-term adhesion. Dry-fit the trim piece against the switch panel to confirm alignment and coverage before committing. Note the natural orientation and any reference points on the door card. Peel back the protective film from the pre-applied adhesive tape on the reverse of the trim. Do not touch the adhesive surface. Carefully align the trim piece to the switch surround, starting from one edge and pressing firmly across the full surface. Apply sustained hand pressure for 30–60 seconds to activate the adhesive bond. Allow 24 hours for the adhesive to fully cure before operating windows repeatedly or subjecting the trim to heavy contact. ⚠ Important: This trim is designed for Left-Hand Drive Defender 110 models only. Attempting to fit on a Right-Hand Drive vehicle will result in incorrect alignment. If you're unsure of your vehicle's specification, check your VIN or contact us at +44 203 943 9919 before ordering. Complete Your Defender Interior This window lifter switch trim is just the beginning. Explore the full Victorious range of Defender L663 interior upgrades — from dashboard overlays to gear surround trims — and build an interior that feels entirely your own. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent retailer of aftermarket and styled accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for the purpose of fitment compatibility.

Victorious Automotive · Defender L663 · Interior Trim Oak ABS Front Air Vent Cover Frame for Land Rover Defender 110 (2020–2026) L663 A precision-fit oak wood grain ABS overlay that brings warm, natural texture to the Defender 110's front air vent surrounds — no tools, no drilling, no compromise. Defender L663 2020–2026 Oak Wood Grain High-Quality ABS Direct Fit Peel & Stick LHD Only Interior Trim ISO9001 Certified Overview The Land Rover Defender 110 L663 represents a genuine reimagining of an icon — purposefully engineered, architecturally bold, and unmistakably modern inside. Its cabin is designed to be functional yet characterful, and the air vent surrounds sit front and centre on the fascia, making them one of the most visible surfaces in the entire interior. These Oak ABS Front Air Vent Cover Frames are designed specifically for that space. Finished in a warm oak wood grain, they introduce a natural, organic contrast against the Defender's industrial material palette. Whether your Defender is specced in Ebony, Lunar or Pimento, the oak finish adds a layer of crafted warmth that the standard trim simply doesn't offer. The ABS substrate ensures the panels are rigid, precisely contoured and built to last — not a flimsy film, but a structured overlay with genuine presence. Installation requires no specialist tools or professional fitting. Each panel is engineered to locate precisely over the existing vent frame and bonds cleanly using factory-grade adhesive backing. The result is a factory-finish appearance that looks like it came straight from a customisation workshop — because, in every meaningful sense, it did. What's Included 🪵 Oak ABS Vent Cover Frame × 2 Left and right front air vent surrounds in oak wood grain finish 🔖 Pre-Applied Adhesive Backing Factory-grade 3M-style adhesive — no additional fixings required 📋 Installation Guidance Step-by-step fitting instructions included in packaging Product Highlights Oak wood grain finish adds natural warmth to the Defender's industrial interior High-quality ABS construction — rigid, structured, and built for longevity Precision-moulded to match the exact contours of the L663 vent frames Peel-and-stick installation — no drilling, no clips, no professional fitting needed Factory-grade adhesive backing for a clean, flush bond to the original trim 100% brand new — supplied in protective packaging to prevent transit damage Manufactured in an ISO9001 certified facility for consistent quality assurance Covers both left and right front air vent surrounds — a complete front fascia upgrade Compatible with Defender 110 and 130 L663 models from 2020 onwards Designed exclusively for Left Hand Drive (LHD) Defender variants Compatibility Vehicle Model Code Year Range Drive Fitment Land Rover Defender 110 L663 2020–2026 LHD Direct Fit Land Rover Defender 130 L663 2022–2026 LHD Direct Fit Land Rover Defender 90 L663 2020–2026 LHD Verify Before Purchase Land Rover Defender 110 L663 2020–2026 RHD Not Compatible Land Rover Defender (Original) Pre-2020 All Years Any Not Compatible Range Rover / Discovery Any All Years Any Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Wipe down the existing air vent surrounds using an isopropyl alcohol wipe or interior detailer to remove any dust, oils or residue that could affect adhesion. Allow the surface to dry fully. Do not apply the covers to a damp or recently cleaned surface — a minimum of 5 minutes drying time is recommended. Dry-fit each cover frame against its corresponding vent surround before removing the adhesive backing. Confirm alignment and orientation — the panels are handed (left and right), so ensure each one is correctly positioned before committing. Peel back a small section of the adhesive liner, align the panel carefully to the vent surround edges, and press down from the centre outward to avoid air pockets. Once positioned, apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond. Work from the centre toward each corner. Repeat the process for the second panel. Leave the interior undisturbed for a minimum of 24 hours before exposing to heat or direct sunlight, to allow the adhesive to cure fully. ⚠ Important: These covers are designed exclusively for Left Hand Drive (LHD) Defender 110 and 130 L663 models. Right Hand Drive vehicles are not compatible. Please confirm your vehicle's drive configuration before ordering. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Upgrade Your Defender's Interior Today Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium interior accessories. Browse the full Defender L663 collection and refine every detail of your cabin. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm 🏭 ISO9001 Certified Manufacturing Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Range Rover Evoque Center Console Gear Panel ABS Decorative Cover Trim (2012–2018) A precision-fit decorative trim panel that elevates the center console of your Evoque L538 with a choice of premium finishes — installed in minutes, no tools required. Evoque L538 2012–2018 ABS Construction 5 Finish Options No-Drill Install Gear Panel Trim Interior Upgrade Direct Fit Overview The Range Rover Evoque L538 was designed with a bold, fashion-forward interior — a cabin that deserves accessories which match its ambition. From the 2012 launch through to the final 2018 model year, the Evoque's center console is one of the most prominent visual focal points in the car, and one of the most touched surfaces in daily use. Over time, standard plastic panels show wear, and even on pristine examples, owners often want to inject a more personalised feel into the cabin. This center console gear panel cover trim is specifically designed and manufactured to the exact contours of the L538 Evoque's gear surround area. Constructed from high-quality ABS plastic, each piece is finished to a consistent, tactile standard and offered in five distinct styles: Carbon Fibre, Silver Chrome, Oak Wood Grain, Black Wood Grain — giving you genuine flexibility to match your existing interior spec or create a bespoke contrast look. Installation is entirely adhesive-based — no drilling, no cutting, no professional fitting required. The automotive-grade double-sided tape bonds securely to the OEM plastic surface and holds under temperature and vibration cycles typical of everyday driving. Whether you're refreshing a daily driver or detailing a show vehicle, this trim delivers a noticeable upgrade to one of the Evoque's most visible interior zones. What's Included 🎛️ Gear Panel Cover Trim 1× ABS decorative trim piece, pre-cut to Evoque L538 spec 🔧 Automotive Adhesive Tape Pre-applied 3M-style tape on reverse for tool-free fitting 📋 Fitment Instructions Step-by-step guide included with each order Product Highlights Precision-moulded to the exact profile of the Evoque L538 gear panel surround Available in 5 finishes: Carbon Fibre, Silver, Oak Wood Grain, Black Wood Grain High-grade ABS construction — rigid, lightweight and heat-resistant Chrome and wood-grain variants feature multi-layer surface treatment for depth and durability Automotive adhesive tape pre-applied — no tools, no drilling, no bodywork impact Covers existing wear, scuffs or fading on the OEM gear panel trim Compatible with both left-hand drive and right-hand drive Evoque variants Direct overlay design — fits cleanly over factory panel without modification Resistant to UV fading and typical in-cabin temperature fluctuations Immediately enhances the perceived quality and visual character of the center console Compatibility Vehicle Code Year Range Fitment Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque (Facelift) L538 2015–2018 Direct Fit Range Rover Evoque Convertible L538 2016–2018 Direct Fit Range Rover Evoque (New Gen) L551 2019–Present Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Thoroughly clean the existing gear panel trim surface using an isopropyl alcohol wipe or trim prep spray. Ensure the surface is completely free of dust, grease and moisture before proceeding. Dry-fit the cover trim piece against the panel to confirm alignment and positioning before committing to adhesion. Check all edges sit flush with no lifting at the corners. Peel back the protective liner from the pre-applied automotive adhesive tape on the rear of the trim piece, exposing the bonding surface. Carefully align the trim with the panel and press firmly from the centre outward, applying consistent pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure fully — ideally leaving the vehicle undisturbed for 24 hours at room temperature before driving in extreme conditions. Avoid washing the interior surface during this cure period. ⚠ Note: Surface temperature affects adhesion quality. Do not attempt installation in a cold environment (below 10°C / 50°F). If your vehicle has been sitting in direct sunlight, allow the cabin to cool before fitting. Failure to properly clean and dry the surface is the most common cause of adhesive bond failure. Upgrade Your Evoque Interior Today Explore the full range of Range Rover Evoque L538 accessories at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover and related vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Product Description: Elevate your vehicle's interior with this stylish Carbon Fiber Steering Wheel Button Trim. Designed for a flawless fit, it brings a refined touch to your driving environment. Product Highlights: Sleek carbon fiber finish for a modern aesthetic. Precision laser cutting for perfect alignment. Available in multiple colors for personalized style. Product Specifications: Compatibility: Range Rover Vogue (2013-2017), Range Rover Sport (2014-2017), Discovery 5 (2017-2018). Material: High-quality carbon fiber. Style: Style A. Package Includes: 1 x Set of Carbon Fiber Steering Wheel Button Trim Notes: Ensure compatibility by verifying your car model and year. Simple installation with no modifications needed.

Victorious · Tesla Model 3 · Interior Upgrades Red Carbon Indicator & Wiper Stalks for Tesla Model 3 Transform your Model 3's interior with premium red carbon fiber stalks that combine visual impact with enhanced durability. T3 2016–2019 Real Carbon Fiber Easy Install Overview Your Tesla Model 3 interior deserves components that match its precision engineering. These red carbon indicator and wiper stalks elevate your cockpit with a bold visual statement while maintaining OEM-quality fitment and durability. Machined from genuine carbon fiber rather than inferior wrap alternatives, these stalks deliver authentic texture and depth. The striking red finish creates contrast against the Model 3's neutral dashboard, catching light as you drive. Unlike painted finishes, real carbon fiber won't chip or fade—it improves with age and daily handling. Installation takes minutes using factory-grade double-sided adhesive. No drilling, no permanent modification. Remove them anytime without residue or damage. What's Included 🎯 Indicator Stalk Left side, directional control 💧 Wiper Stalk Right side, wiper operation 📋 Installation Guide Step-by-step photo instructions 🧹 Prep Cloth Isopropyl-treated for surface cleaning Product Highlights Genuine carbon fiber weave, not vinyl wrap or composite Seamless fit for Tesla Model 3 2016–2019 models Premium double-sided adhesive rated for high-contact areas Red finish complements OEM steering wheel and trim accents Increased tactile grip for daily directional and wiper control UV-stable finish resists fade and oxidation Lightweight—no added steering column strain Reversible installation with no permanent modifications Pairs seamlessly with carbon fiber steering wheels and trim kits 3-year warranty against manufacturing defects Compatibility Model & Year Status Tesla Model 3 (2016–2019) Direct Fit Tesla Model 3 (2020+) Not Compatible Tesla Model 3 Performance Direct Fit Tesla Model 3 Standard Range Direct Fit Installation Difficulty: Beginner | Time: 5–10 minutes Clean the stalk surfaces. Use the supplied prep cloth to wipe down both indicator and wiper stalks on your Model 3. Remove any dust, oils, or residue. Allow 1 minute to dry fully. Peel adhesive backing. Carefully remove the protective liner from the double-sided tape on the carbon fiber covers. Align and press. Position each stalk cover over its corresponding original stalk. Press firmly for 10 seconds to ensure full contact and adhesion. Allow curing time. Wait 24 hours before using the stalks to allow adhesive to reach full strength. ⚠️ Important: Ensure the dashboard surface temperature is between 60–80°F before installation. Cold conditions may reduce adhesive effectiveness. Do not force stalks into place; alignment should feel effortless. Complete Your Model 3's Carbon Interior Red carbon fiber stalks are just the beginning. Explore matching steering wheel wraps, door handle covers, and trim kits to create a fully integrated cockpit aesthetic. Shop All Model 3 Upgrades Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Tesla, Inc., or any official Tesla subsidiary. All product names and vehicle designations are used for identification and compatibility purposes only.

Victorious · Mercedes W205 · Infotainment Mercedes NTG5 Wireless Apple CarPlay & Android Auto Integration – 2015–2019 Seamless wireless smartphone mirroring for your Mercedes cabin, retaining factory controls and adding premium navigation, music, and voice command in one elegant interface. W205 / NTG5 2015–2019 Wireless CarPlay Android Auto OEM Integration Voice Control Overview This wireless CarPlay and Android Auto integration transforms your Mercedes-Benz W205 cabin into a modern connected hub. Compatible with A, B, C, E, G, CLA, GLA, GLC, and S-Class models equipped with NTG5 infotainment systems (7" and 8.4" displays), this interface bridges your smartphone seamlessly without sacrificing factory functionality. Built for the discerning Mercedes owner who demands reliability without compromise, the system maintains full access to steering wheel controls, rotary knob navigation, and all OEM features while adding wireless Bluetooth and WiFi connectivity. Access Google Maps, Waze, Apple Maps with live traffic, stream Spotify and Apple Music, and control everything via voice—all while keeping your hands on the wheel. Installation is straightforward for automotive electrical specialists, and the system retains compatibility with aftermarket camera systems. A 30-day money-back guarantee and our 4.9-star track record across 12,300+ verified reviews back every purchase. What's Included 📦 Wireless Interface Unit Plug-and-play integration module for NTG5 systems 📖 Installation Guide Step-by-step professional wiring documentation Product Highlights Wireless Bluetooth and WiFi connectivity with USB fallback option Apple CarPlay and AirPlay support for seamless iOS integration Android Auto mirroring with full smartphone app access Real-time GPS navigation via Google Maps, Waze, and Apple Maps Premium music streaming: Spotify, Apple Music, Amazon Music Hands-free voice control for safety and convenience Aftermarket camera compatibility maintained Retains factory steering wheel and knob controls EQ audio customization and USB media playback Drop-in integration with no screen replacement needed Compatibility Model Series Year Range Screen Size NTG System Status A-Class (W176) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible B-Class (W246) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible C-Class (W205) 2015–2019 7" / 8.4" NTG5.0–5.5 Compatible E-Class (W213) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible G-Class (W463) 2015–2019 7" / 8.4" NTG5.0–5.1 Compatible CLA-Class (C117) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible GLA-Class (X156) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible GLC-Class (C253) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible S-Class (W222) 2015–2019 7" / 8.4" NTG5.0–5.2 Compatible Pre-2014 or Non-NTG5 Before 2014 Any Older systems Not Compatible Installation Notes Difficulty Level: Intermediate Estimated Time: 1–2 hours with professional installation recommended. Disconnect the car battery to isolate power circuits. Remove the infotainment unit bezel and display trim using appropriate panel tools. Carefully disconnect all factory connectors from the rear of the NTG5 unit. Connect the wireless interface harness to the OEM connector block. Secure the interface module discreetly behind the dashboard or in a trim pocket. Reconnect the battery and power on the vehicle. Pair your smartphone via Bluetooth and test CarPlay or Android Auto connectivity. Verify all factory controls (steering wheel buttons, rotary knob) function correctly. Important: Ensure your vehicle's AUX functionality is enabled before purchase. If uncertain, consult your Mercedes dealer's configuration settings or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm). Professional installation by an automotive electrical specialist is strongly recommended to avoid damage to OEM systems. Ready to Elevate Your Cabin Tech? Transform your Mercedes infotainment into a modern wireless hub without sacrificing factory controls or reliability. Join over 12,300 satisfied owners who trust Victorious Automotive for premium integration solutions. Add to Cart Unlock 20% off any 2 items with code 22GET20 ✓ 4.9/5 Stars · 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping · DHL, FedEx, UPS, TNT ✓ Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official Mercedes trademark holder. All product names and specifications are provided for compatibility reference only. Always verify compatibility with your specific vehicle before purchase. Installation is at the owner's risk; professional automotive electrical installation is recommended.

```html Victorious · Jaguar · Interior Trim Carbon Fiber ABS Center Console Trim for Jaguar XE, XEL, XF, XFL & F-Pace Premium precision-cut carbon fiber console trim elevates your Jaguar's interior with a modern, aggressive finish. XE & XEL XF & XFL F-Pace 2016–2020 ABS Carbon Fiber Direct Fit Overview This carbon fiber ABS center console trim is engineered for Jaguar owners who demand precision and visual impact. Whether you're upgrading a Jaguar XE, XEL, XF, XFL, or F-Pace, this trim transforms your dashboard with a sophisticated, modern aesthetic that commands attention. High-quality ABS construction mimics the appearance of authentic carbon fiber while delivering superior durability and scratch resistance. Each trim is precision-cut to fit seamlessly into your console, with no modification required. Installation is straightforward using automotive-grade adhesive tape—no tools, no fuss. This is one of the most cost-effective ways to refresh your Jaguar's interior. It catches light beautifully, adds depth to your dash, and signals that you care about the details. What's Included 📦 Center Console Trim Precision-cut ABS carbon fiber panel 🔧 Adhesive Tape Factory-spec automotive-grade backing Product Highlights Precision-cut ABS construction mimics carbon fiber finish Direct fit—no drilling, cutting, or modifications Pre-applied automotive adhesive tape for secure mounting Seamless integration with OEM Jaguar interior design Scratch-resistant surface maintains finish over time Simple installation in under 15 minutes Instantly upgrades cabin aesthetics and perceived quality Compatible with XE, XEL, XF, XFL & F-Pace 2016–2020 Single-piece trim—simplified installation Engineered for daily durability and long-term retention Compatibility Jaguar Model Year Range Fit Status XE 2016–2020 Direct Fit XEL 2016–2020 Direct Fit XF 2016–2020 Direct Fit XFL 2016–2020 Direct Fit F-Pace 2016–2020 Direct Fit E-Pace 2018–2020 Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Prepare the area: Clean the center console trim surface with a damp microfiber cloth. Allow to dry completely (5 minutes minimum). Peel adhesive backing: Carefully remove the adhesive tape backing from the trim panel. Align and press: Position the trim over your console, starting from the top. Press firmly in sections, working downward to avoid air bubbles. Secure edges: Once positioned, apply firm pressure across the entire trim for 30 seconds to ensure full adhesion. Allow cure time: Leave the vehicle undisturbed for 24 hours before operating the climate controls or adjusting console components. Note: Adhesive reaches full strength after 24 hours. Avoid touching or moving the trim during this period for optimal durability. Upgrade Your Jaguar Interior Today Transform your XE, XF, or F-Pace with this premium carbon fiber center console trim. Modern, durable, and installed in minutes. Shop the complete collection of Jaguar interior upgrades now. View All Jaguar Trim Use code 22GET20 for 20% off any 2 items 4.9/5 – 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx & UPS shipping ✓ UK support: +44 203 943 9919 Victorious Automotive is not affiliated with Jaguar Land Rover, Jaguar Cars Limited, or any official Jaguar distributor. All vehicle names, logos, and specifications are the property of their respective manufacturers. This product is designed for aftermarket fitment only. Always consult your vehicle's manual before installation. Victorious Automotive accepts no liability for improper installation or damage resulting from use. ```

```html Jaguar · E-Pace & Multi-Model · Exterior Trim ABS Chrome Door Handle Trim Set – Jaguar XE, XF, F-Pace & E-Pace Elevate your Jaguar's exterior with precision-engineered chrome door handle covers. Direct-fit styling in just minutes. E-Pace XE X760 XF X260 F-Pace X761 ABS Chrome 8pc Set Exterior Trim Overview Jaguar owners demand refinement in every detail. This chrome door handle trim set delivers the premium finish your E-Pace, XF, XE, or F-Pace deserves—combining sophisticated aesthetics with durable, weather-resistant engineering. The set includes eight precision-cut ABS chrome pieces that frame your door handles in elegant contrast. Each piece is engineered for exact fitment across Jaguar's contemporary lineup, transforming your vehicle's exterior presence without modification or permanent alteration. Whether you're refreshing a daily driver or maintaining concours-level presentation, this trim set represents practical luxury. Install in under 15 minutes with no tools required. The hardened ABS material resists UV fading, road salt, and thermal stress—keeping your Jaguar looking showroom-fresh for years. What's Included 🚪 Door Handle Covers 8× ABS chrome trim pieces ✨ Pre-Fitted Design Ready to install, no cutting 🛡️ UV & Salt Resistant Durable ABS material 📋 Installation Guide Step-by-step instructions Product Highlights Complete 8-piece set covers all door handles Premium ABS construction with chrome finish Direct fit—no modification required Installs in under 15 minutes Resistant to UV fading and road salt Enhances exterior elegance instantly OEM-quality precision engineering Compatible with all trim levels Non-permanent application Weather-tested durability Compatibility Jaguar Model Generation / Code Fit Status E-Pace All years Direct Fit XE X760 Direct Fit XF X260 Direct Fit F-Pace X761 Direct Fit Installation Difficulty: Beginner | Time: 10–15 minutes | Tools: None required Clean the door handle area with a damp cloth and allow to dry completely. Remove the adhesive backing from each chrome trim piece. Align the first trim piece carefully over the door handle frame. Press firmly for 5 seconds to ensure full contact and adhesion. Repeat steps 3–4 for all remaining pieces on all four doors. Allow adhesive to cure for 24 hours before touching handles. Inspect all seams for proper alignment and full contact. Note: Clean surfaces thoroughly with rubbing alcohol before application for maximum adhesion. Avoid installation in temperatures below 50°F or above 85°F. Elevate Your Jaguar Today Premium exterior detailing starts with thoughtful trim upgrades. This chrome door handle set delivers the refinement every Jaguar deserves—without compromise. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping ☎ +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Jaguar Cars Limited, or their parent companies. All vehicle names and model designations are the property of their respective manufacturers. This product is designed for aftermarket fitment only. ```

```html Jaguar · E-PACE / XE / XF / XJL · Interior Trim Mirror Trim for Jaguar XE, XF, XJL, F-Pace & E-Pace Premium interior mirror trim upgrade with precision-fit ABS construction for an instantly refined cabin aesthetic. E-PACE XE · XF · XJL · F-Pace ABS Trim Interior Easy Install Overview Jaguar owners understand that refined interiors demand attention to detail. This premium mirror trim set is engineered to elevate the cabin presence of your XE, XF, XJL, F-Pace or E-Pace with a factory-finished upgrade that catches light perfectly and transforms the mirror surrounds from standard trim to a statement piece. Each trim is precision-cut from high-quality ABS plastic, engineered to match original Jaguar panel gaps and profiles. The finish is designed to complement both modern and classic Jaguar interior palettes, enhancing perceived quality without requiring structural modifications. Installation is straightforward—this is a bolt-in enhancement that takes less than 30 minutes, with no tools beyond a basic trim removal set. Whether you're personalising a daily driver or adding finishing touches to an owned classic, this trim delivers professional results that rival dealer-installed options. What's Included 🪞 Mirror Trim Set 1x precision ABS mirror frame surround ⚙️ Fastening Hardware All clips and adhesive backing included Product Highlights Precision-cut ABS construction for durability and longevity Factory-finish appearance matches OEM interior trim lines Direct fit—no cutting, grinding, or panel modification needed Enhances cabin light reflection and perceived interior depth Professional installation in under 30 minutes Compatible with all XE, XF, XJL, F-Pace & E-Pace models listed Lightweight design—zero impact on vehicle dynamics or electronics Resists fading, UV exposure, and interior temperature swings Affordable cabin upgrade without dealer labour costs Pairs seamlessly with other Jaguar interior trim enhancements Compatibility Model / Variant Fit Status Jaguar E-Pace Direct Fit Jaguar XE (All Years) Direct Fit Jaguar XF (All Years) Direct Fit Jaguar XJL (All Years) Direct Fit Jaguar F-Pace (All Years) Direct Fit Jaguar X761 Direct Fit Installation Difficulty: Beginner · Time: 20–30 mins Prepare the mirror. Remove any existing trim or adhesive around the mirror frame using a trim removal tool or soft plastic pry bar. Clean the surface. Wipe the mirror surround with a microfibre cloth and isopropyl alcohol. Allow 2–3 minutes for complete drying. Position the trim. Carefully align the new ABS trim with the mirror frame, starting from one edge and working across. Secure the trim. Press firmly around the entire perimeter to activate the adhesive backing. Hold pressure for 10 seconds at stress points (corners and joints). Verify the fit. Step back and check alignment. The trim should sit flush with no visible gaps or lifting at edges. Allow curing. Leave the vehicle interior undisturbed for 24 hours to allow adhesive to set completely. Note: If your vehicle's climate control is set to high heat, postpone installation to cooler hours. Cold adhesive sets faster and bonds more securely. Ready to Refine Your Interior? This mirror trim is a quick, affordable way to add perceived craftsmanship to your Jaguar cabin. Order today and see why thousands of owners trust Victorious for quality interior upgrades. Shop Mirror Trim Now Use code 22GET20 for 20% off any 2 items ✓ 30-day Money-Back Guarantee ✓ 4.9/5 Stars • 12,300+ Reviews ✓ Worldwide DHL/FedEx Shipping 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessory supplier and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Jaguar Cars Limited, or any official Jaguar brand entity. All vehicle names and designations remain the property of their respective manufacturers. This product is designed for aftermarket fitment only. ```

```html Jaguar · E-Pace · Interior Trim Carbon Fibre Interior Console for Jaguar E-Pace 2018–2020 Precision-cut carbon fibre gear shift trim that transforms your E-Pace interior with motorsport-grade styling. E-Pace 2018–2020 Carbon Fibre ABS Composite Gear Shift Trim Direct Fit Overview The Jaguar E-Pace demands interior refinement that matches its dynamic exterior. This carbon fibre interior console upgrade transforms your centre console and gear shift surround with authentic motorsport styling, instantly elevating the visual impact of your cabin. Precision-cut from high-quality ABS composite with a genuine carbon fibre weave finish, this trim piece sits flush against your existing interior without modification. The textured weave catches light beautifully and creates depth and dimensionality—a detail that separates cars that are merely owned from those that are truly refined. Installation is straightforward, requiring no specialist tools or permanent modifications. Once fitted, the console becomes an integral part of your E-Pace's design language, perfectly complementing factory trim and aftermarket upgrades alike. What's Included 🎯 Console Trim Panel Single-piece centre console cover ✓ Pre-Fitted Adhesive Factory-grade contact backing 📋 Installation Guide Step-by-step visual instructions 🔒 30-Day Guarantee Full refund if not satisfied Product Highlights Authentic carbon fibre weave finish—no cheap imitations High-quality ABS composite for durability and lightweight design Precision-cut to OEM dimensions—seamless factory fit Pre-applied contact adhesive—no additional materials needed Resistant to fading, UV damage, and thermal stress Complements both factory and modified interiors Reversible installation—leaves no permanent marks Works with all E-Pace trim levels (S, R-Dynamic, HSE) Professional finish that rivals dealer-installed upgrades Part of a complete E-Pace interior upgrade system Compatibility Vehicle Years Fitment Jaguar E-Pace 2018–2020 Direct Fit Jaguar E-Pace 2021–Present Not Compatible Installation Notes Difficulty Level: Beginner | Time: 15 Minutes Remove protective film from the back of the trim panel. Clean the factory console surface thoroughly with a microfibre cloth and isopropyl alcohol. Allow to dry completely. Carefully position the trim panel above the centre console to verify alignment. Once satisfied with placement, press firmly into position, working from the centre outward to eliminate air pockets. Allow the adhesive 24 hours to cure before using the centre console controls. Note: Do not apply heat or excessive pressure during installation. Ensure the factory surface is completely dry to guarantee adhesive bond strength. Ready to Upgrade Your E-Pace? Transform your interior with the precision and style of true motorsport engineering. This carbon fibre console trim is the detail that catches every eye and reminds you why your E-Pace deserves the best. Shop Carbon Fibre Interior Trim Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money Back ✓ 4.9★ Verified Reviews ✓ Worldwide Shipping ✓ Expert Support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessory manufacturer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, or any of its subsidiaries or group companies. All product names, logos, and trademarks are the property of their respective owners. ```

Victorious Automotive · Range Rover Sport L494 · Exterior Protection Front & Rear Bumper Guard Protection Plates for Range Rover Sport L494 (2018–2021) Precision-laser-cut stainless steel bumper guard plates engineered to shield the front and rear bumpers of your 2018–2021 Range Rover Sport from road debris, scratches, and daily wear — without compromising its commanding aesthetic. Range Rover Sport L494 2018–2021 Stainless Steel Front & Rear Drill-Free Fitment Laser Cut Exterior Protection Direct Bolt-On Overview The 2018–2021 Range Rover Sport L494 is one of the most visually assertive SUVs on the road — a vehicle that earns its presence whether navigating city streets or covering open terrain. Its low-slung bumper lines and sculpted lower body panels are defining design features, but they're also among the most exposed surfaces to stone chips, kerb contact, grit, and trailing debris. Over time, even minor accumulation of wear on these areas begins to undermine the confidence the Sport is designed to project. These Front and Rear Bumper Guard Protection Plates are designed specifically for the L494 Sport's 2018–2021 facelift generation, using precision laser-cutting to match the exact contours of the bumper's lower face. Manufactured from high-grade stainless steel, each plate delivers genuine structural defence against mud, gravel, and road debris — acting as a sacrificial shield between the elements and your original paintwork. Unlike generic universal guards, these plates integrate flush with the bumper line, maintaining the Sport's purposeful silhouette rather than disrupting it. Installation requires no drilling, no cutting, and no specialist tools. The plates bolt directly onto existing mounting points using the hardware provided, meaning fitment is clean, reversible, and achievable at home in under an hour. For owners who refuse to let daily mileage take the edge off a vehicle they've invested in, these plates are a straightforward, high-quality solution. What's Included 🛡️ Front Bumper Guard Plate Laser-cut stainless steel, L494 Sport fitment 🛡️ Rear Bumper Guard Plate Matched pair, same material and finish 🔩 Mounting Hardware All fixings required for direct bolt-on installation 📄 Installation Instructions Step-by-step fitment guide included Product Highlights Precision laser-cut for exact flush fit on the L494 Sport bumper profile High-grade stainless steel construction resists corrosion and impact Covers both front and rear bumper lower sections in one package Protects original paintwork from stone chips, grit, and debris Drill-free, direct bolt-on installation onto OEM mounting points No special tools required — achievable with standard home equipment Reversible fitment — fully removable without leaving permanent marks Maintains the Sport's factory aesthetic without visual compromise Designed specifically for the 2018–2021 L494 facelift generation Enhances the purposeful, rugged stance of the Range Rover Sport Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L494 (Facelift) 2018–2021 Direct Fit Range Rover Sport L494 (Pre-Facelift) 2013–2017 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: Basic hand tools only Ensure the vehicle is parked on a flat, stable surface and the ignition is off. Allow the bumper area to cool if the vehicle has been recently driven. Clean the front and rear bumper lower surfaces thoroughly with a dry microfibre cloth to remove any dirt, grease, or moisture that could affect fitment alignment. Locate the existing OEM mounting points on the lower bumper — these are the anchor positions the guard plates are designed to align with directly. Offer up the front guard plate to the bumper, aligning the pre-drilled holes with the OEM mounting points. Confirm flush contact across the full width before securing. Hand-tighten the provided fixings first to confirm alignment, then tighten to the recommended torque using the included hardware. Do not over-tighten stainless steel fixings. Repeat the same process for the rear bumper guard plate, ensuring equal gap consistency along the lower edge. Step back and visually inspect both plates for level fitment and symmetry. Wipe down with a clean cloth to remove any fingerprints before driving. ⚠ Important: Confirm your exact model year is 2018–2021 L494 before installation. The facelift and pre-facelift L494 bumpers differ in profile. Fitting to an incompatible year may result in poor alignment or gaps. If in doubt, contact us before proceeding. Built for Range Rover Sport Owners Who Demand More At Victorious Automotive, every accessory we carry is selected for owners who take their vehicle seriously. These bumper guard plates are a practical investment in preserving the condition and appearance of your 2018–2021 Range Rover Sport L494 — one that pays for itself the first time it deflects a stone chip that would have gone straight to bare metal. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Range Rover, Range Rover Sport, and L494 — are the property of their respective owners and are used solely for the purpose of fitment identification and compatibility reference.

Victorious Automotive · Range Rover Evoque L551 · Running Boards Side Running Boards for Range Rover Evoque L551 (2020–2022) Precision-moulded aluminium alloy side steps engineered for a direct-fit, no-drill installation on the second-generation Range Rover Evoque — combining structural strength with a clean, factory-integrated look. L551 Evoque 2020 · 2021 · 2022 Aluminium Alloy ABS Body Stainless Steel Brackets No Drilling Required ISO9001 · TS16949 600–800kg Load Rated Direct Fit Overview The second-generation Range Rover Evoque (L551) sits at an elevated ride height that, while commanding on the road, can make entry and exit feel less graceful — particularly for shorter drivers, passengers with mobility considerations, or anyone loading luggage and equipment. These side running boards address that directly, providing a wide, secure step platform that integrates seamlessly with the Evoque's refined body lines. Constructed from ISO9001-certified high-grade aluminium alloy with an ABS step surface and stainless steel mounting brackets, these running boards are built to last in real-world conditions. The stainless steel hardware offers exceptional resistance to heat, acid, salt, and corrosion — essential for a vehicle that spends time on British roads, coastal environments, or anywhere road salt is a concern. The load-bearing structure is rated to withstand 600–800kg of static force, meaning the brackets will outlast the vehicle if properly maintained. Manufactured through a closed-mould production process, every dimension is engineered specifically for the L551 Evoque platform. The fit is precise — no adaptation, no shimming, no compromise. Whether your Evoque is a manual-door or automatic-door variant, the running board sizing is identical, and installation uses your vehicle's existing chassis holes without any drilling whatsoever. What's Included 🔲 Side Running Boards (Pair) Left & right aluminium alloy step boards with ABS anti-slip surface 🔩 Stainless Steel Mounting Brackets Thickened stainless steel stents for maximum structural rigidity 🛠️ Installation Hardware Pack All bolts, washers, and fasteners required for a complete fit 📋 Installation Guide Step-by-step instructions for straightforward self-installation Product Highlights Aluminium alloy body — lightweight yet exceptionally rigid underfoot ABS step surface resists scratches, scuffs, and surface wear over time Stainless steel brackets rated to 600–800kg static load capacity Anti-corrosion stainless hardware — resistant to heat, acid, salt, and moisture Closed-mould production ensures 100% dimensional accuracy for the L551 platform No drilling required — mounts directly to existing factory chassis holes Suitable for both manual and automatic door variants of the Evoque ISO9001 and TS16949 dual-certified manufacturing process Vibration-dampening construction reduces road noise and rattle Factory-integrated aesthetic that complements the Evoque's design language Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 – 2022 Direct Fit Range Rover Evoque L551 2023+ Verify Before Purchase Range Rover Evoque (First Gen) L538 2011 – 2018 Not Compatible Range Rover Velar L560 2017+ Not Compatible Discovery Sport L550 2015+ Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 45–75 minutes  |  👤 1–2 people recommended Park your Evoque on a flat, level surface and ensure the vehicle is secure before working underneath. Locate the pre-existing mounting holes along the underside of the chassis — no drilling is required at any stage. Attach the stainless steel mounting brackets to the chassis holes using the supplied hardware, ensuring each bracket is seated flush and square. With a second person to assist, align each running board onto the mounted brackets from front to rear. Insert and hand-tighten all fasteners before torquing down to a firm, even finish — do not over-tighten. Inspect all contact points, check for lateral movement, and confirm both boards are level and secure before driving. ⚠ Important: Always verify that the chassis mounting points are clean and free from corrosion before installation. If you are unsure at any stage, we recommend consulting a qualified installer. Do not exceed the rated load capacity of 600–800kg on either step. Complete Your Evoque Browse the full range of premium accessories for the Range Rover Evoque L551 — from exterior styling to interior protection — all designed with the same level of precision and finish quality. Shop All Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Range Rover Velar · Exterior Styling Silver & Black Hood Vent Slats for Range Rover Velar 2017–2019 Transform your Velar's bonnet with precision-finished two-tone vent slat trims that deliver the Dynamic Edition look — no drilling, no fuss, no compromise. Range Rover Velar 2017–2019 Silver & Black Bonnet Vent Trims Peel & Stick Exterior Styling High-Grade ABS No Drilling Required Overview The Range Rover Velar arrived with one of the most architecturally considered silhouettes in the modern SUV era — flush surfaces, flush door handles, and a bonnet line that draws the eye from front to rear. The hood vent apertures are a defining detail of that design, and yet in standard trim, they remain understated. These Silver and Black Hood Vent Slat Trims are designed specifically for Velar owners who want to unlock the full visual intent of that feature. Finished in a polished silver and gloss black two-tone combination, these vent slat inserts slot cleanly into the existing bonnet vent cutouts and replicate the appearance of the Velar's premium Dynamic specification. The contrast between the silver slats and black surround picks out the geometry of the vent with precision, adding visual depth and a purposeful, performance-orientated character without altering the vehicle's original lines. Manufactured from high-grade ABS polymer with a mirror-quality surface finish, these trims are built to resist UV fading, temperature cycling, and the general rigours of daily driving. Installation requires no tools, no adhesive mixing, and no professional fitting — just a clean surface, a few minutes, and the confidence that the result will look factory-correct from day one. What's Included 🔲 Hood Vent Slat Trims (x2) Left and right silver & black inserts for both bonnet vents 📎 Pre-Applied 3M Adhesive Tape High-bond automotive-grade backing, factory-applied to each trim 🧹 Surface Prep Wipe Alcohol cleaning wipe to ensure a clean bond prior to fitting 📄 Fitting Instructions Step-by-step guide included in the box Product Highlights Designed specifically for the Range Rover Velar 2017–2019 bonnet vent apertures Two-tone silver and gloss black finish for a Dynamic Edition aesthetic High-grade ABS construction — resistant to UV, heat, and road vibration Pre-applied 3M automotive adhesive — no separate bonding agents required Tool-free installation completable in under 15 minutes Precision-cut for flush, factory-correct fitment — no gaps or proud edges Does not interfere with bonnet vent function or airflow Non-permanent — fully removable without damage to paintwork Available in three colourways: Silver/Black, Rose Gold, and Full Black Supplied as a complete pair — fits both left and right vents simultaneously Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar (L560) 2017 – 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020 – 2022 All trims Verify Before Purchase Range Rover Evoque (L551) 2019 – 2024 All trims Not Compatible Range Rover Sport (L494) 2013 – 2022 All trims Not Compatible Range Rover Vogue (L405) 2013 – 2021 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and allow the bonnet to cool fully to ambient temperature before beginning installation. Use the included alcohol prep wipe to thoroughly clean the surface of each bonnet vent aperture. Remove all wax, polish residue, and road film. Allow to dry completely — approximately 60 seconds. Test-fit each vent slat trim against its corresponding aperture without removing the adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first trim. Position carefully within the vent aperture, starting from the centre and working outward. Apply firm, even pressure across the full length of the trim for a minimum of 30 seconds to activate the adhesive bond. Repeat for the second vent slat trim on the opposite side. Allow 24 hours before washing the vehicle or exposing the bonnet to heavy rain, to allow the adhesive to reach full cure strength. ⚠ Note: Do not attempt installation in direct sunlight or when ambient temperature is below 10°C, as this will reduce adhesive performance. For best results, install indoors or in a shaded area with a surface temperature between 15°C and 35°C. Complete the Look on Your Velar Explore the full Victorious range of exterior styling accessories for the Range Rover Velar — from mirror caps and grille surrounds to side vents and door trims. Everything you need to finish the build, in one place. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. All rights remain with their respective owners.

Victorious Automotive · Range Rover Sport L494 · Mirror Accessories Range Rover Sport 2013–2020 Chrome Mirror Trim Surround A precision-fitted chrome mirror surround that elevates the exterior detailing of your L494 Range Rover Sport with a polished, factory-adjacent finish. Range Rover Sport L494 2013–2020 High-Quality TPU Chrome Finish Peel & Stick No Drilling Required Exterior Trim Mirror Surround Overview The Range Rover Sport L494 — produced from 2013 through 2020 — is a vehicle that commands presence by design. Its sculpted body lines, assertive stance, and premium exterior detailing set it apart from the moment it arrives. For owners who take that exterior seriously, every surface matters — including the door mirrors, which sit prominently at eye level and contribute significantly to the vehicle's overall visual character. This Chrome Mirror Trim Surround is engineered specifically for the L494 Range Rover Sport. Manufactured from high-quality TPU with a lustrous chrome finish, it wraps cleanly around the mirror housing to introduce a refined, upscale accent that complements both standard and upgraded exterior specifications. The result is a subtle but unmistakable transformation — the kind that catches the eye without shouting for attention. Installation requires no specialist tools, no drilling, and no professional fitting time. The adhesive-backed design means this is a genuine weekend upgrade — clean the surface, align carefully, press firmly, and the surround bonds flush and secure. It's the detail-focused upgrade that Range Rover Sport owners appreciate precisely because it looks like it should have come that way from the factory. What's Included 🪞 Chrome Mirror Surround One piece, pre-shaped for L494 mirror housing 🔧 Pre-Applied Adhesive 3M-grade adhesive backing included 📋 Installation Guide Step-by-step fitting instructions 🧹 Cleaning Prep Wipe Surface prep cloth for optimal adhesion Product Highlights Precision-moulded to fit the L494 Range Rover Sport mirror housing profile exactly High-gloss chrome finish delivers a premium, factory-quality aesthetic Constructed from durable TPU — flexible, impact-resistant, and long-lasting Peel-and-stick installation requires no tools, drilling, or professional fitting 3M-grade adhesive backing ensures a firm, weather-resistant bond UV-stable finish resists fading, oxidation, and discolouration over time Enhances the exterior detailing of both standard and upgraded Sport variants Low-profile design sits flush with the mirror housing — no gaps or proud edges Removable without damage to paintwork when surface prep guidelines are followed Compatible with all L494 trim levels including SE, HSE, HSE Dynamic, and SVR-adjacent body styles Compatibility Vehicle Code Years Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean the mirror housing surface using the included prep wipe. Remove all traces of wax, dirt, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit the chrome mirror surround against the housing to confirm alignment and positioning. Take note of the correct orientation before applying adhesive. Carefully peel back the adhesive liner from the surround, exposing the adhesive surface. Avoid touching the adhesive with bare fingers. Starting from one edge, align the surround precisely with the mirror housing profile and press firmly into position. Work progressively across the piece to eliminate air pockets. Apply firm, sustained pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Pay particular attention to corners and edges. Allow a minimum of 2 hours before exposing to water or moisture. Full adhesive cure is achieved after 24 hours. ⚠ Important: Installation in temperatures below 10°C (50°F) may reduce adhesive performance. For best results, install indoors or in a garage environment. Always verify vehicle compatibility before fitting. Upgrade Your Sport's Detail Shop the full Range Rover Sport L494 accessories collection at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Buy any two items and save 20% with the code below. Shop Range Rover Sport L494 → Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and designations referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Evoque · Interior Lighting Range Rover Evoque Additional Ambient Lighting Upgrade — Fiber Optic LED Interior Strip Kit Transform your Evoque's cabin atmosphere with a premium fiber optic LED band lighting system — delivering crisp, cool-white illumination along door panels and interior trim with a clean, factory-flush finish. Range Rover Evoque L538 Range Rover Evoque L551 Fiber Optic LED Interior Ambient Light 12000K Cool White 4W Low Draw Cree LED Chip Plug & Fit Door Panel Lighting 2400lm Output Overview The Range Rover Evoque occupies a unique space in the Land Rover lineup — compact enough for urban life, yet premium enough to demand a cabin that feels genuinely considered at every hour of the day. Whether you own the first-generation L538 or the refined L551, the factory ambient lighting spec often leaves enthusiasts wanting more depth, more presence, and more atmosphere once the sun goes down. This fiber optic LED ambient lighting kit is purpose-built to address exactly that. Using genuine Cree LED chip technology and a flexible fiber optic band format, the system layers soft, continuous illumination along your door panels and interior trim lines — creating a seamless glow that integrates naturally with the Evoque's interior architecture rather than looking like an afterthought. At 12000K colour temperature, the output reads as a clean, crisp cool white that complements the Evoque's contemporary design language without overpowering it. Each of the four included strips ships at one metre in length and carries its own dedicated light source, giving you independent control over placement and intensity across all four door panels. The result is a balanced, symmetrical lighting upgrade that elevates the Evoque cabin to a level that genuinely rivals far more expensive factory options — installed without the need for professional fitting or wiring specialists. What's Included 💡 Fiber Optic LED Strips × 4 1 metre each, individual light source per strip 🔌 Light Source Units × 4 Cree LED chip, 4W, 12000K per unit 📄 Installation Instructions Step-by-step printed fitting guide 🔧 Mounting Adhesive Pre-applied strip backing for clean fitment Product Highlights Genuine Cree LED chip technology for consistent, long-life output 12000K cool white colour temperature — sharp, premium cabin feel 2400 lumens total output across four strips Fiber optic band format for seamless, even illumination with no hotspots 4W total draw — negligible impact on vehicle battery and electrics Each strip ships at 1 metre — ideal for full door panel coverage Independent light source per strip for flexible installation routing Not EL (electroluminescent) wire — true LED fiber optic performance Lightweight 0.5kg kit — no structural modification required Compatible across multiple Range Rover and Land Rover variants Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–Present Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Classic MK1 1970–1996 Direct Fit Range Rover P38A MK2 1994–2002 Direct Fit Range Rover L322 MK3 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L461 2022–Present Verify Before Order Range Rover Vogue L460 2022–Present Verify Before Order Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 60–90 minutes  ·  No professional fitting required Gently remove door panel trim inserts or lower sill trim pieces to expose the routing channel. No permanent removal is necessary — light prying with a trim tool is sufficient on most Evoque variants. Clean the mounting surface thoroughly with an isopropyl alcohol wipe and allow to dry completely before applying the adhesive-backed fiber optic strips. This ensures a lasting bond. Route each fiber optic strip along the desired panel line — typically along the lower door card edge or accent trim groove — following the natural contour of the interior surface. Connect each strip's light source unit to a switched 12V feed, such as the courtesy light circuit or an existing interior lighting circuit, so the ambient lights activate with the cabin lighting. Tuck all wiring neatly behind trim panels using the existing cable routing channels and refit all trim pieces. Test each strip individually before final reassembly. Power on and verify uniform illumination across all four strips. Minor positional adjustments can be made within the first few minutes before the adhesive fully cures. ⚠ Note: Always disconnect the vehicle's negative battery terminal before working with interior wiring circuits. If you are unfamiliar with automotive electrics, we recommend having the wiring connection completed by a qualified auto electrician. The fiber optic strips themselves require no electrical connection and can be positioned independently of the light source units. Elevate Your Evoque Interior Browse the full collection of Range Rover Evoque interior upgrades at Victorious Automotive — curated specifically for owners who expect more from their cabin. Shop Evoque Accessories Shop Evoque L551 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes. Always verify fitment with your specific vehicle's VIN and build specification before purchase. If in doubt, contact our team before ordering.