Defender L663 Accessories

Victorious Automotive · Defender L663 · Interior Trim Carbon Fiber Door Inner Handle Decorative Frame Cover for Land Rover Defender L663 90 (2020–2022) A precision-engineered carbon fibre finish upgrade for the Defender 90's inner door handles — delivering a sharper, more purposeful cabin aesthetic with zero permanent modification. Defender L663 2020–2022 Carbon Fibre Finish 90 Short Wheelbase ABS Plastic Adhesive Fit Interior Trim No Drilling Required Overview The Land Rover Defender L663 is a vehicle built around intention — bold architecture, go-anywhere capability and a cabin that rewards those who take time to personalise it. The 90 variant, in particular, carries an inherently purposeful character, and every surface detail contributes to the overall impression. The inner door handle surrounds are among the most frequently touched points in the cabin, making them a natural focal point for a considered upgrade. These carbon fibre decorative frame covers are designed specifically for the Defender L663 90 (2020–2022) and sit precisely over the existing inner door handle recesses, replacing the standard plastic finish with a striking woven carbon fibre effect. Manufactured from high-grade ABS plastic with a detailed carbon fibre surface treatment, these covers bring a motorsport-inspired visual quality that sits naturally alongside the Defender's rugged-yet-refined interior aesthetic. Installation requires no drilling, no wiring and no professional fitting. Each piece is backed with automotive-grade double-sided adhesive, designed to bond firmly to the original door panel surface. The result is a clean, factory-finished appearance that elevates the interior without compromising the integrity of the vehicle — ideal for owners who want refinement without commitment. What's Included 🪟 Door Handle Frame Covers × 2 Carbon fibre finish ABS covers for Defender 90 (2-door inner handles) 🔧 Pre-Applied Adhesive Tape Automotive-grade double-sided adhesive pre-fitted to each cover 📄 Installation Guide Step-by-step fitment instructions included in packaging Product Highlights Precision-moulded ABS plastic for exact panel contour matching on the L663 90 Woven carbon fibre surface finish — motorsport-inspired texture and depth Pre-applied automotive-grade double-sided adhesive for a firm, lasting bond No drilling, cutting or permanent modification to original panels 100% brand new — not refurbished or reconditioned Designed exclusively for the Defender L663 90 (2020–2022) short wheelbase Supplied as a 2-piece set to cover all inner door handle surrounds Resistant to UV fading and daily cabin wear Compatible with both left and right-hand drive configurations Clean, reversible installation — panels can be removed without surface damage Compatibility Vehicle Model Code Years Variant Fitment Land Rover Defender 90 L663 2020–2022 Short Wheelbase (2-door) Direct Fit Land Rover Defender 110 L663 2020–2022 Standard Wheelbase (4-door) Not Compatible Land Rover Defender 130 L663 2022+ Extended Wheelbase Not Compatible Defender (Classic) Pre-L663 Pre-2020 All variants Not Compatible Defender 90 L663 L663 2023+ Facelift / MY2023 onward Verify Before Purchase Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin with the vehicle interior at room temperature. Cold panels reduce adhesive effectiveness — avoid fitting in temperatures below 10°C. Thoroughly clean the inner door handle surround areas using an isopropyl alcohol wipe or a clean, lint-free cloth. Remove all dust, oils and residue. Allow the surface to dry completely — a minimum of 2–3 minutes — before proceeding. Dry-fit each cover to confirm orientation and alignment before removing the adhesive backing. Peel the protective film from the adhesive tape on the rear of each cover. Carefully align the cover over the handle surround and press firmly into position, applying even pressure across the full surface for 30–60 seconds. Avoid heavy use of the handle for at least 24 hours to allow the adhesive to cure fully. ⚠ Note: Ensure the surface is completely free of polish, wax or conditioning products prior to fitment. These can prevent a permanent bond. If your door panels have been recently treated, wait at least 48 hours before installing. Complete Your Defender Interior From carbon fibre trim panels to premium gear surrounds and ambient lighting upgrades — explore the full range of Defender L663 interior accessories at Victorious Automotive. Trusted by over 12,300 verified customers worldwide. Shop Defender L663 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle variant and model year before purchase.

Victorious Automotive · Defender L663 · Exterior Trim Gloss Black Front Windshield Pillar Trim for Land Rover Defender 110/90 L663 (2020–Present) A precision-fit gloss black A-pillar trim upgrade that sharpens the Defender L663's exterior profile with a clean, purposeful aesthetic and no permanent modifications required. Defender L663 2020–Present Gloss Black ABS Plastic Direct Fit No Drilling Adhesive Mount Exterior Trim 90 & 110 Overview The Land Rover Defender L663 arrived in 2020 as one of the most anticipated vehicle relaunches in automotive history — and owners who care about the details know that the right exterior trim can transform an already commanding presence into something truly refined. The front windshield A-pillars are one of the most visible structural elements on the Defender's face, and the factory finish, while functional, leaves room for a more considered aesthetic statement. This Gloss Black Front Windshield Pillar Trim is engineered specifically for the Defender 90 and 110 (L663, 2020–present). Manufactured from high-quality ABS plastic with a deep gloss black surface finish, each piece is precision-shaped to follow the exact contour of the Defender's A-pillar — sitting flush, looking factory, and elevating the overall exterior with minimal effort. The result is a cohesive, blacked-out accent that works particularly well alongside other dark exterior packages or satin black accessories. Installation is entirely tool-free. Each trim piece arrives pre-prepared for 3M-grade double-sided adhesive mounting, meaning you can achieve a professional result in your own driveway without drilling, clipping, or risk of paint damage. Whether you're building out a full exterior upgrade or simply want to refine a single detail, this is one of the most impactful and reversible changes you can make to the front face of your Defender. What's Included 🪟 A-Pillar Trim — Driver Side Gloss black ABS, pre-shaped for L663 left pillar 🪟 A-Pillar Trim — Passenger Side Gloss black ABS, pre-shaped for L663 right pillar 📋 Installation Guide Step-by-step fitment instructions included 🔧 Double-Sided Adhesive Tape Pre-cut 3M-grade tape for secure, clean mounting Product Highlights Deep gloss black finish for a premium, blacked-out exterior look Precision-moulded ABS plastic — contoured to the L663 A-pillar profile Tool-free installation — no drilling, no clipping, no specialist equipment 3M-grade double-sided adhesive for a secure, long-lasting bond Compatible with both Defender 90 and Defender 110 body variants Reversible fitment — no permanent alterations to factory paintwork UV-resistant surface finish to prevent fading and discolouration over time Manufactured under ISO 9001 quality standards for consistent finish quality Pairs seamlessly with black mirror caps, grille trims, and door handle covers Lightweight construction — zero impact on vehicle weight or aerodynamics Compatibility Model Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–Present 5-Door SUV Direct Fit Land Rover Defender 90 L663 2020–Present 3-Door SUV Direct Fit Land Rover Defender 130 L663 2022–Present 8-Seat Extended Verify Before Purchase Land Rover Defender (Original) L316 1983–2016 All Variants Not Compatible Range Rover Sport L494 / L461 All Years All Variants Not Compatible Range Rover Vogue L405 / L460 All Years All Variants Not Compatible Installation Notes ⏱ Estimated Time: 20–30 minutes  ·  🔧 Difficulty: Easy (No Tools Required) Park your Defender on a level surface and allow the exterior to reach ambient temperature — avoid installation in direct sunlight or below 10°C for optimal adhesive performance. Thoroughly clean both A-pillar surfaces using an isopropyl alcohol (IPA) wipe or panel prep solution. Remove all wax, polish residue, dust, and moisture before proceeding. Dry-fit each trim piece against the A-pillar without removing the adhesive backing. Confirm alignment, contour match, and overall positioning before committing. Peel back the adhesive liner on the trim piece and carefully align one end of the trim with the base of the A-pillar. Work upward, pressing firmly along the full length of the trim to ensure full contact with the adhesive. Apply sustained hand pressure along the entire trim for 30–60 seconds to activate the adhesive bond. Pay particular attention to any curved or edge sections. Repeat for the opposite side. Allow 24 hours cure time before exposing the vehicle to rain, car washes, or pressure washing. ⚠ Important: Do not attempt installation over wet, dirty, or freshly waxed paintwork. Insufficient surface preparation is the primary cause of adhesive failure. If surface temperatures are outside the 10°C–35°C range, allow the vehicle to acclimatise before applying. For vehicles with paint protection film (PPF) on the A-pillars, test adhesive compatibility on a small hidden area first. Built for Defenders. Backed by Victorious. Every accessory in our Defender L663 collection is selected for fit, finish, and long-term quality. Join over 12,300 Land Rover owners who trust Victorious Automotive for their vehicle upgrades. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment compatibility purposes. Land Rover® and Defender® are registered trademarks of Jaguar Land Rover Limited.

Victorious Automotive · Defender L663 · Exterior Styling Blackout Taillight Shades for Land Rover Defender L663 (2020–2022) A precision-fit smoked taillight cover set that instantly darkens your Defender's rear lamp clusters — no drilling, no wiring, no compromise. Defender L663 2020–2022 ABS Plastic Smoked / Blackout Adhesive Fit No Drilling Exterior Styling Direct Fit Overview The Land Rover Defender L663 is one of the most visually purposeful vehicles on the road — a modern icon that rewards owners who take its styling seriously. Every detail of the exterior has been considered, and for those who want a darker, more commanding rear presence, the factory red taillight clusters are the obvious place to start. These Blackout Taillight Shades are engineered specifically for the 2020–2022 Defender L663 platform, cutting precisely to the profile of the rear lamp housings for a seamless, OEM-coherent finish. Manufactured from high-quality ABS plastic in a consistent matte black tone, they overlay the factory lenses to deliver a smoked, blacked-out look that reads as an intentional factory choice — not an afterthought. Installation requires no tools, no professional fitting, and no modification to the vehicle's electrical system. The covers bond cleanly using pre-applied automotive-grade double-sided adhesive tape, making this one of the most accessible exterior upgrades available for the Defender. The result is a cohesive, stealthy rear aesthetic that complements both dark and light exterior colour schemes equally well. What's Included 🔲 Taillight Blackout Shade × 2 Left and right covers, pre-cut for L663 rear clusters 🩹 Automotive Adhesive Tape Pre-applied double-sided tape on each cover 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut for the 2020–2022 Defender L663 rear lamp profile Transforms factory red clusters to a sleek smoked / blacked-out finish High-quality ABS plastic construction — rigid, UV-stable, and durable Pre-applied automotive-grade double-sided adhesive for secure bonding Tool-free installation achievable in under 30 minutes No drilling, cutting, or modification to factory components required Matte black finish complements both dark and light body colours Supplied as a complete pair — left and right covers included Removable without permanent damage to the original lamp housings Brand new condition — 100% unused, quality-checked before dispatch Compatibility Model Code Year Range Body Style Fitment Land Rover Defender 90 L663 2020–2022 3-Door Direct Fit Land Rover Defender 110 L663 2020–2022 5-Door Direct Fit Land Rover Defender 130 L663 2022 8-Seat Direct Fit Land Rover Defender 110 L663 2023–2026 5-Door (Facelift) Verify Before Purchase Land Rover Defender (First Gen) L316 Pre-2020 All Not Compatible Range Rover Sport / Vogue L494 / L405 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean the surface of both rear taillight clusters using an isopropyl alcohol wipe or clean microfibre cloth. Ensure the surface is completely dry and free of wax, grease, or polish residue before proceeding. Dry-fit each shade against its corresponding taillight to confirm alignment and check that the cover sits flush across the entire lamp housing profile. Peel back a small section of the adhesive tape backing on one shade and carefully position it against the taillight, starting from one edge and working inward to avoid air pockets. Once correctly aligned, apply firm, even pressure across the full surface of the shade for 30–60 seconds to activate the adhesive bond. Repeat the process for the second shade on the opposite side. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain, a car wash, or extreme temperatures. ⚠ Important: These covers are designed for aesthetic enhancement only. Always verify that your taillights remain clearly visible to other road users after installation and comply with local vehicle lighting regulations in your country or region. Complete Your Defender's Exterior Explore the full range of Defender L663 exterior styling accessories — all precision-engineered for the 2020–2026 platform and trusted by Defender owners worldwide. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for fitment identification and compatibility purposes.

Victorious Automotive · Defender L663 · Exterior Protection Front Lamp Light Cover Guards for Land Rover Defender L663 (2020–2026) Precision-moulded polycarbonate headlight guards that shield your Defender's front lamps from trail debris, stone chips, and off-road grime — without compromising light output. Defender L663 2020–2026 Polycarbonate PC Direct Fit CE Certified High Transparency Heat Resistant Exterior Accessory Overview The Land Rover Defender L663 was built for genuine off-road capability — and if you're using yours the way it was intended, your headlights are constantly exposed to flying gravel, trail debris, mud, and high-pressure wash cycles. The factory lamp units on the L663 are a significant part of its signature face, and protecting them from chips, crazing, and surface damage is one of the easiest long-term investments you can make. These Front Lamp Light Cover Guards are precision injection-moulded from optically clear, high-temperature resistant polycarbonate — the same material class used in aircraft canopies and motorsport visors. The mould is developed directly from original OEM geometry, meaning the covers follow every contour of the L663's front lamp housing for a flush, factory-correct fit that looks intentional rather than aftermarket. Unlike generic lamp covers that dull your light output or create uneven beam projection, these guards maintain near-complete optical transparency. The PC material is also inherently antioxidant and UV-stabilised, so they won't yellow or haze over time even when subjected to sustained exposure to sunlight, heat, and harsh cleaning chemicals. Whether you're running the Defender on greenlanes, forest tracks, or simply want to preserve the condition of your daily driver, these covers do exactly what they promise. What's Included 💡 Front Lamp Cover Guards Full set — left and right lamp covers included 🔧 Fitting Hardware All necessary fixings for direct installation 📄 Installation Guide Step-by-step fitting reference included Product Highlights Precision injection-moulded from original OEM lamp geometry for a flush, exact fit High-transparency polycarbonate maintains full light output with no beam distortion High-temperature resistant PC material — stable under sustained engine bay heat Antioxidant and UV-stabilised construction prevents yellowing and hazing over time Protects factory lamp lenses from stone chips, trail debris, and surface crazing No drilling or modification required — direct clip or bracket fitment Factory-correct aesthetic — looks designed for the vehicle, not retrofitted CE certified — meets European product safety and material quality standards Resistant to high-pressure washing, mud, and off-road chemical exposure Preserves long-term resale value by keeping factory lamp units in pristine condition Compatibility Model Generation / Code Year Range Compatibility Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Defender (Classic / L316) L316 Pre-2016 Not Compatible Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 minutes  ·  Tools Required: Trim removal tool (optional) Ensure the vehicle is parked on a level surface with the ignition off and the front lamps fully cooled before beginning fitment. Clean the front lamp lens housings thoroughly using a soft microfibre cloth and a mild automotive glass cleaner, removing all dust, grime, and moisture. Dry the lamp surfaces completely — any residual moisture beneath the cover can cause condensation or adhesion issues over time. Test-fit each cover against the corresponding lamp housing before final installation to confirm alignment and confirm no adjustment is needed. Following the included guide, locate the designated fixing points on the lamp housing surround and align the cover's mounting tabs or brackets accordingly. Secure each cover using the supplied hardware, applying even, gentle pressure to avoid cracking the polycarbonate. Do not overtighten. Perform a final visual check from a distance to confirm both covers are seated flush and symmetrically before driving. ⚠ Note: Confirm your specific Defender variant (90 / 110 / 130) and model year before fitting. These guards are designed exclusively for the L663 generation (2020 onwards) and are not compatible with the classic Defender L316 platform. If you are unsure of your vehicle's specification, contact us on +44 203 943 9919 before installation. Built for Defenders That Actually Get Used Browse the full range of Victorious Automotive exterior accessories for the Defender L663 — from body protection and trim upgrades to lighting and off-road specification parts. Explore the complete collection below. Shop Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Support: Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for compatibility identification purposes. CE certification applies to this product's material and safety standards as tested by the manufacturer.

Victorious Automotive · Defender L663 · Exterior Trim ABS Black Rear Light Frame for Land Rover Defender 110 L663 (2020–2026) A precision-formed ABS rear light surround that integrates cleanly with the Defender 110's angular exterior, adding a purposeful blacked-out finish to the tail-light cluster without modification. Defender L663 2020–2026 ABS Plastic Gloss Black Rear Light Surround No Drilling Required Adhesive Fit Model: LLK2781 ISO9001 Certified Overview The Land Rover Defender 110 L663 is a vehicle that commands attention on any terrain — its upright silhouette, exposed bolt detail, and utilitarian design language are instantly recognisable. For owners who want to sharpen that aesthetic without compromising the Defender's honest character, selective exterior trim upgrades offer the most considered approach. The rear light area, in particular, is a focal point of the Defender's tail-end — and the right surround can transform how the entire rear reads from a distance. This ABS Rear Light Frame has been purpose-built to the exact dimensional profile of the Defender 110 L663 rear light cluster. Manufactured from high-grade ABS thermoplastic and finished in a uniform gloss black, it wraps the perimeter of each light unit with clean, defined lines that complement the Defender's geometric styling. The result is a cohesive, blacked-out rear end that feels intentional rather than aftermarket. Engineered to ISO9001 quality standards, this frame delivers consistent fitment and finish quality you can rely on. The pre-applied automotive-grade adhesive tape on the reverse face means installation is straightforward and residue-free if removal is ever needed. No drilling, no cutting, no specialist tools — just a clean upgrade that looks like it was always there. What's Included 🔲 Rear Light Frame ABS gloss black surround, pre-taped rear 🔧 Adhesive Mounting Tape Automotive-grade, pre-applied to frame 📄 Fitment Guide Step-by-step installation reference Product Highlights Custom-profiled for the Defender 110 L663 rear light cluster — precise panel gap alignment High-grade ABS thermoplastic construction — impact-resistant and UV-stable Uniform gloss black finish — consistent sheen across the full frame profile Pre-applied automotive adhesive tape — no drilling or body modification required ISO9001 certified manufacturing — consistent quality across every unit produced Lightweight design at 1,025g — no perceptible added mass to the vehicle 65cm span covers the full width of the light unit perimeter cleanly Complements Defender black pack and dark exterior trim configurations Tool-free installation — achievable in under 30 minutes by a single person Reversible fitment — adhesive tape allows clean removal without paint damage Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Product Specifications Specification Detail Model Number LLK2781 Material ABS Thermoplastic Colour Gloss Black Item Length 65 cm Item Width 25 cm Item Height 10 cm Item Weight 1,025 g Certification ISO9001 Mounting Method Pre-applied automotive adhesive tape Installation Notes ⏱ Estimated Time: 20–30 minutes  ·  🔧 Difficulty: Beginner Thoroughly clean the rear light surround area on your Defender 110 using an IPA (isopropyl alcohol) wipe. Remove any wax, polish, or silicone residue. Allow to dry completely before proceeding. Dry-fit the rear light frame against the vehicle without removing the adhesive backing. Confirm the profile aligns cleanly with the light unit perimeter and all panel gaps sit evenly. Mark your positioning reference points lightly with a removable marker or masking tape if needed — particularly at the outer corners. Peel the protective backing from the pre-applied adhesive tape. Avoid touching the adhesive surface with bare fingers. Starting from the centre, press the frame firmly into position, working outward toward each end. Apply firm, even pressure across the full surface for at least 60 seconds. Allow a minimum of 24 hours cure time before exposing the vehicle to rain or a car wash. The adhesive bond will reach full strength within 48–72 hours. ⚠ Important: Do not attempt installation on a cold or damp surface. Ambient temperature should be above 10°C for the adhesive to bond correctly. If your vehicle has recently been resprayed, wait at least 30 days before applying any adhesive-backed trim to ensure paint has fully cured. Complete Your Defender's Exterior This rear light frame pairs perfectly with our full range of Defender 110 L663 exterior trim upgrades — from mirror caps and door handle surrounds to bonnet vents and side vents. Build a cohesive look across every panel. Shop Defender 110 (2020) Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and designations referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Trim Land Rover Defender 110 Rear Bumper Plate Cover Trim Stickers — ABS Black, L663 2020+ A precision-formed ABS rear bumper plate cover that reinforces the Defender 110's bold exterior stance with a factory-matched black finish and a hassle-free adhesive installation. Defender 110 L663 2020–2026 ABS Black Rear Bumper Exterior Trim Adhesive Fit ISO9001 Certified Model LLK2841 Overview The Land Rover Defender 110 L663 is a vehicle built to make a statement — utilitarian, purposeful, and unmistakably bold. Every surface detail contributes to its commanding road presence, and the rear bumper area is no exception. Whether you're running a daily commute or heading off-road, the rear end of your Defender deserves the same attention to detail as the rest of the build. This Rear Bumper Plate Cover Trim is designed specifically for the 2020-onwards Defender 110 L663, engineered to sit flush against the bumper's lower plate section with no drilling or cutting required. Formed from high-grade ABS plastic and finished in a deep satin black, it integrates seamlessly with the Defender's existing exterior aesthetic — whether your vehicle is in Santorini Black, Carpathian Grey, or any other factory colour. The fitment uses purpose-selected automotive-grade adhesive tape, the same technology used in OEM trim applications across the industry. The result is a clean, rattle-free attachment that holds firmly through temperature extremes, road wash, and the kind of conditions a Defender genuinely encounters. It's a subtle upgrade that looks like it was always there. What's Included 🛡️ Rear Bumper Plate Cover Trim 1x ABS Black trim panel, model LLK2841 🔧 Adhesive Mounting Tape Pre-cut automotive-grade tape included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed for the 2020+ Defender 110 L663 bumper profile High-grade ABS construction — impact-resistant and lightweight Deep satin black finish complements all factory Defender colours ISO9001 certified manufacturing for consistent quality control No drilling, no cutting — clean adhesive-only installation Automotive-grade tape included; pre-cut for exact panel fitment Resistant to UV fading, water ingress, and road debris Rattle-free bond once cured — flush sit against bumper surface Dimensions: 79cm L × 20cm W × 10cm H | Weight: 300g Direct replacement aesthetic — looks factory-fitted from day one Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Defender 110 (Classic) Pre-L663 Pre-2020 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🛠 Tools Required: None Park the Defender 110 on a level surface and allow the bumper to cool to ambient temperature before starting — avoid installation in direct sunlight or below 10°C for best adhesive performance. Thoroughly clean the rear bumper plate surface using an isopropyl alcohol wipe or panel wipe solution, removing all road film, wax, and grease. Allow to dry completely before proceeding. Dry-fit the ABS trim cover against the bumper surface to confirm alignment and panel seating before committing the adhesive. The trim should sit flush with no raised edges. Peel the protective backing from the pre-cut adhesive tape strips. Position the trim carefully, starting from the centre and working outward to avoid air pockets. Apply firm, even hand pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Pay particular attention to corners and edges. Allow the adhesive to cure for a minimum of 24 hours before subjecting the vehicle to rain, washing, or high-speed motorway driving. ⚠ Note: Do not attempt to reposition the trim once the adhesive tape has made full contact with the bumper surface. Adhesive effectiveness is significantly reduced if the trim is removed and re-applied. If in doubt, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before installation. Complete Your Defender's Exterior This bumper trim is just the beginning. Explore the full range of Defender 110 L663 exterior accessories at Victorious Automotive — curated specifically for owners who hold their vehicles to the same standard we do. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Exterior Accessories Wind Deflector Guard for Land Rover Defender L663 110 & 130 (2020–2026) A precision-engineered ABS wind deflector guard purpose-built for the Defender L663, reducing cabin turbulence and wind noise while keeping fresh air circulating — no drilling required. Defender L663 110 & 130 2020–2026 High-Quality ABS Direct Fit No Drilling Peel & Stick Install Window Vent Visor Exterior Upgrade Overview The Land Rover Defender L663 is a vehicle built for those who demand capability without compromise — a reborn icon engineered for both serious off-road use and refined everyday driving. Whether you're running the 110 five-door or the long-wheelbase 130 with its expanded passenger configuration, the Defender's architecture benefits enormously from thoughtful exterior upgrades that enhance comfort without altering its purposeful character. These wind deflector guards are designed from the ground up to complement the angular, utilitarian bodywork of the L663. Manufactured from high-quality ABS (Acrylonitrile Butadiene Styrene), they integrate seamlessly into the window channel of each door, creating a low-profile aerodynamic barrier that deflects wind, rain, and road spray away from the cabin aperture. The result is noticeably reduced wind noise at motorway speeds, the ability to crack windows open during light rain without soaking the interior, and improved airflow management for a more pleasant driving environment. Unlike bulkier aftermarket visors, these deflectors keep a clean, factory-adjacent aesthetic that doesn't compromise the Defender's bold visual presence. The finish is carefully matched to suit the L663's window surround, and because the fitment is handled entirely via a peel-and-stick adhesive system, there is no requirement for drilling, cutting, or permanent modification to your vehicle. Installation is clean, reversible, and achievable in under thirty minutes on your driveway. What's Included 🪟 Front Left Deflector Driver-side window vent visor, pre-cut for L663 front door 🪟 Front Right Deflector Passenger-side window vent visor, pre-cut for L663 front door 🪟 Rear Left Deflector Rear driver-side visor, shaped for L663 rear door profile 🪟 Rear Right Deflector Rear passenger-side visor, shaped for L663 rear door profile 🔧 Adhesive Tape Strip Set Pre-applied 3M-grade double-sided tape on each deflector 📋 Installation Guide Step-by-step illustrated fitting instructions included Product Highlights Precision-cut for Land Rover Defender L663 110 and 130 body dimensions High-quality ABS construction — resistant to UV, heat, and impact Reduces wind noise and cabin turbulence at motorway speeds Allows windows to remain cracked open during light rain without water ingress Low-profile design preserves the Defender's bold, factory aesthetic No drilling, no cutting — fully non-invasive peel-and-stick installation Pre-applied 3M-grade adhesive tape for a secure, long-term bond Compatible with both standard and optional window glass configurations Improves interior ventilation, reducing reliance on air conditioning 100% brand new — supplied as a complete four-piece set for all main doors Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 130 L663 2020–2026 Long-Wheelbase SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Verify Before Purchase Defender 110 (Pre-2020) L316 Pre-2020 Classic Utility Not Compatible Range Rover Sport L461 / L494 Various 5-Door SUV Not Compatible Range Rover Vogue L460 / L405 Various 5-Door SUV Not Compatible Installation Notes ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Difficulty: Easy — No Tools Required Clean the window channel: Thoroughly clean the door frame and window surround with an isopropyl alcohol wipe. Remove all wax, polish, and dust residue. Allow to dry completely before proceeding. Dry-fit each deflector: Hold each deflector against the window channel without removing the tape backing. Confirm the profile aligns correctly with the door frame top rail before committing to placement. Peel and position: Remove the adhesive tape backing from the deflector. Starting at one end of the channel, carefully press the deflector into position, working gradually along its length to avoid bubbles or misalignment. Apply firm pressure: Once positioned, press firmly along the entire length of the deflector for 30–60 seconds to activate the adhesive bond. Pay particular attention to the ends and any curved sections. Cure time: Allow a minimum of 24 hours before operating the windows at high speed or washing the vehicle, to allow the adhesive to fully cure against the door surface. Repeat for all four doors: Follow the same process for each deflector in sequence — front left, front right, rear left, rear right — cross-referencing the fitting guide for any door-specific orientation notes. ⚠ Important: Do not attempt installation in temperatures below 5°C or in direct sunlight on a hot day, as extreme temperatures can affect adhesive performance. If your Defender has been previously fitted with aftermarket window tint or sealant near the channel area, clean thoroughly to ensure a clean bonding surface. If unsure about compatibility with your specific build variant, please contact our team before purchasing. Upgrade Your Defender L663 Today Every detail matters on a Defender. These wind deflector guards are a clean, functional upgrade that improves daily usability without compromising the vehicle's character. Browse our full range of Defender L663 exterior accessories and find everything your Land Rover deserves — all in one place. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced (including Defender, L663, and Land Rover) are the property of their respective owners and are used solely for fitment identification and compatibility reference purposes. Please verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Defender L663 · Interior Trim Oak Wood Grain Interior Door Handle Decorative Frame Cover for Land Rover Defender 110 L663 (2020–2022) Bring refined warmth to your Defender's cabin with a precision-engineered oak wood grain ABS trim that frames every door handle with understated, purposeful elegance. Defender 110 L663 2020–2022 Oak Wood Grain ABS Plastic Adhesive Fit Interior Trim 4-Piece Set No Drilling Overview The Land Rover Defender 110 L663 is a vehicle built on heritage and purpose — but for many owners, the standard interior finish leaves room to personalise. The cabin is functional by design, yet its broad expanses of hard plastic around the door pull handles represent one of the most visible opportunities to elevate the interior's character. This is exactly where these Oak Wood Grain Decorative Frame Covers come in. Crafted from high-quality ABS plastic and finished in a sophisticated carbon fibre oak wood grain texture, each cover fits cleanly over the existing door handle surround, transforming a utilitarian detail into a refined accent point. The warm wood grain pattern creates a compelling contrast against the Defender's rugged interior architecture — adding the kind of layered, crafted feel typically associated with higher-specification trim packages. Designed as a direct-fit accessory for the 2020–2022 Defender 110, installation requires no drilling, no special tools, and no professional fitting. The included double-sided adhesive backing bonds firmly and cleanly to the original trim surface, delivering a factory-finished look from day one. For Defender owners who want to add something individual without compromising the vehicle's character, this is one of the most impactful interior changes you can make. What's Included 🪵 Door Handle Frame Covers × 4 Full set for Defender 110 — all four doors covered 🔲 Pre-Applied Adhesive Backing Double-sided tape included on each piece for immediate install 📋 Installation Guide Basic fitment instructions included in packaging Product Highlights Precision-moulded ABS plastic construction for lasting durability and shape retention Oak wood grain finish adds warmth and texture to the Defender's utilitarian cabin Pre-applied double-sided adhesive for a clean, tool-free installation Direct-fit design — engineered specifically for the Defender 110 L663 door handle recess No drilling, no cutting, and no permanent modification to original trim panels Resistant to UV fading and daily wear from regular door use Low-profile fitment sits flush with surrounding trim for a seamless, OEM-style finish Lightweight construction adds no perceptible weight or bulk to the door assembly Full set of four pieces — covers all front and rear door handle frames simultaneously Compatible with both left-hand and right-hand drive Defender 110 configurations Compatibility Model Code Years Variant Fit Defender 110 L663 2020–2022 All Trims (S, SE, HSE, X, X-Dynamic) Direct Fit Defender 90 L663 2020–2022 All Trims — 2-piece set required See Note Defender 130 L663 2022+ All Trims Not Confirmed Defender 110 L663 2023–2026 Facelift Models Not Confirmed Defender 90/110 Pre-L663 Pre-2020 Classic / Heritage Not Compatible ⚠ Defender 90 L663 owners: this listing includes 4 pieces suited to the 110. If you own the 90, please contact us before ordering — we can advise on the correct piece count for your vehicle. Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean each door handle surround with an isopropyl alcohol wipe and allow to dry completely. This ensures the adhesive bonds to a grease-free surface. Before removing the adhesive backing, dry-fit each cover to confirm orientation and alignment. Each piece is shaped to a specific corner — take a moment to identify front-left, front-right, rear-left, and rear-right. Peel the protective film from the double-sided adhesive tape on the first cover, taking care not to contaminate the adhesive surface. Position the cover carefully over the door handle recess and press firmly into place, starting from the centre and working outward to eliminate air pockets. Apply sustained firm pressure for 30–60 seconds per piece to activate the adhesive bond fully. Repeat for all remaining covers. Avoid operating the door handles aggressively for at least 2–4 hours to allow the adhesive to cure fully at room temperature. Important: Do not attempt installation in cold conditions below 10°C — adhesive bond strength is significantly reduced at low temperatures. If your vehicle has been parked outside in cold weather, allow the door panels to warm to room temperature before fitting. Complete Your Defender Interior These door handle covers are just the beginning. Explore the full Victorious range of Defender 110 interior accessories — from gear surround trims to dashboard overlays — and build a cabin that reflects how seriously you take your Defender. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Loadspace Trim Black Stainless Steel Loadspace Treadplate – Land Rover Defender 110 L663 (2020–2026) A precision-formed black stainless steel loadspace treadplate that protects the Defender 110's rear sill from daily wear while delivering a purposeful, finished aesthetic worthy of the L663's character. Defender L663 110 Wheelbase 2020–2026 Black Finish Stainless Steel Loadspace Protection Model: LLK2605 ISO9001 Certified No Drilling Required Overview The Land Rover Defender L663 110 was built to work as hard as it looks — and no area of the vehicle bears the brunt of daily use more than the loadspace sill. Whether you're loading gear for an overland trip, hauling dogs and kit across rural terrain, or simply using the Defender the way it was intended, that rear aperture takes a constant battering from boots, cargo, and equipment. This Black Loadspace Treadplate has been engineered specifically for the 2020-onwards Defender 110 L663 to sit flush against the rear load sill, providing a protective layer of high-grade stainless steel between your vehicle's body and the inevitable scuffs and scratches that come with ownership. The satin black finish is not simply a coating — it complements the Defender's bold lines and dark exterior trim options with a cohesive, factory-integrated appearance. Constructed to ISO9001-certified manufacturing standards and finished with automotive-grade adhesive tape backing, this treadplate installs cleanly without modification, drilling, or specialist tools. It's the kind of upgrade that rewards the detail-oriented owner — subtle enough to look deliberate, durable enough to last the life of the vehicle. What's Included 🪛 Loadspace Treadplate × 1 Black stainless steel, model LLK2605 🔧 Adhesive Tape Pre-Applied Automotive-grade backing for secure fit 📄 Installation Guide Step-by-step fitment instructions Product Highlights Purpose-engineered for the Defender 110 L663 loadspace sill profile High-grade stainless steel construction for lasting durability Satin black finish complements dark trim and exterior details ISO9001-certified manufacturing process for quality assurance No drilling, cutting, or modification to original bodywork required Automotive adhesive tape backing for a clean, bonded installation Protects against scuffs, scratches, and boot marks at the load sill Dimensions: 70cm (L) × 15cm (W) × 10cm (H) — 300g total weight Retains the Defender's working aesthetic without looking aftermarket Reversible installation — preserves original finish beneath Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Not Compatible Land Rover Defender 130 L663 2022–2026 Not Compatible Land Rover Defender (Original) L316 Pre-2016 Not Compatible Range Rover Sport L494 / L461 All Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–20 Minutes  ·  Tools Required: None Open the Defender 110's tailgate fully to expose the rear load sill area and gain clear access to the fitment surface. Thoroughly clean the sill surface using an isopropyl alcohol wipe or panel prep solution, removing all dirt, grease, wax, and residue. Allow to dry completely — this step is critical for adhesion performance. Dry-fit the treadplate against the sill to confirm alignment and positioning before removing the adhesive backing. Peel back the adhesive tape liner from the rear of the treadplate, taking care not to touch the adhesive surface. Starting from one end, carefully press the treadplate firmly into position along the sill, applying consistent pressure across the entire length for 30–60 seconds. Apply firm thumb pressure across all edges and corners to ensure full contact and eliminate any lifting points. Allow a minimum of 2–4 hours cure time before loading the vehicle or exposing the sill to moisture. ⚠ Important: Do not install in temperatures below 10°C / 50°F as adhesive performance may be compromised. Avoid washing the vehicle for 24 hours after installation to allow full bond strength to develop. Complete Your Defender's Interior Explore our full range of Defender L663 interior upgrades — from door sill plates and dashboard trim to loadspace liners and grab handle covers. Every product is selected for fit, finish, and long-term quality. Shop Defender 110 L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. "Defender" and "Land Rover" are registered trademarks of Jaguar Land Rover Limited.

Victorious Automotive · Defender L663 · Interior Trim Stainless Steel Loadspace Treadplate for Land Rover Defender 110 L663 (2020–2026) A precision-formed stainless steel loadspace treadplate that reinforces your Defender 110's rear sill with a durable, factory-grade finish — protecting what matters while elevating what you see every time the tailgate drops. Defender L663 2020–2026 Stainless Steel Loadspace Treadplate Rear Sill Protection Silver & Black Direct Fit No Drilling Required Model: LLK2605 ISO9001 Certified Overview The Land Rover Defender 110 L663 was engineered to go further — across terrain most vehicles wouldn't dare attempt. But every time the tailgate opens, the rear sill takes the brunt of boots, kit bags, and heavy loads. Over time, that scuff-prone edge begins to tell a story you'd rather it didn't. The loadspace treadplate addresses this directly: a purpose-built protective trim that sits flush across the rear sill and takes the hit so your factory paintwork doesn't have to. Constructed from high-grade stainless steel and precision-cut to match the exact profile of the Defender 110 L663, this treadplate delivers a clean, purposeful aesthetic in keeping with the Defender's character. Available in both Silver and Black, it complements both standard and dark-themed interior builds equally well. The brushed finish resists fingerprints and minor abrasions, maintaining its appearance through years of genuine use. Installation requires no drilling and no specialist tools — a pre-applied automotive-grade adhesive tape ensures a secure, rattle-free bond directly to the sill. The result is a finish that looks like it left the factory that way, with the peace of mind that your Defender's rear loadspace entry is protected for the long haul. What's Included 🔩 Stainless Steel Treadplate 1x rear loadspace sill cover trim, LLK2605 🧲 Automotive Adhesive Tape Pre-cut, high-bond 3M-style mounting tape 📋 Fitting Guide Step-by-step surface prep and fitment instructions Product Highlights Precision-formed to match the exact contour of the Defender 110 L663 rear sill High-grade stainless steel construction — corrosion resistant and built to last Available in Silver and Black to suit standard and dark-theme interiors Brushed finish resists surface scratches, scuffs, and fingerprints in daily use No drilling required — automotive adhesive tape provides a clean, secure bond Protects factory paintwork from boot scuffs, loading damage, and wear ISO9001 quality certified manufacturing for consistent finish and fit Lightweight at 300g — no impact on boot floor dynamics or tailgate operation Dimensions: 70cm (L) × 15cm (W) — full-width sill coverage for the 110 body Reversible fitment — can be removed cleanly without damaging original surfaces Compatibility Model Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Not Compatible Land Rover Defender 130 L663 2022–2026 8-Seat Extended Not Compatible Range Rover Sport L494 / L461 2013–2026 5-Door SUV Not Compatible Range Rover Vogue L405 / L460 2013–2026 5-Door SUV Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔧 Tools Required: None Open the Defender 110's tailgate fully and clear the rear loadspace sill of any existing dirt, grease, or moisture using an isopropyl alcohol wipe or equivalent cleaning solution. Allow the sill surface to dry completely — adhesion performance is significantly reduced on damp or contaminated surfaces. Dry-fit the treadplate against the sill without removing the adhesive backing to confirm alignment and positioning before committing. Peel back the adhesive tape protective liner and carefully align the treadplate to the sill, starting from one end and pressing firmly along the full length to ensure consistent contact. Apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond fully. Allow a minimum of 2 hours cure time before placing any load across the treadplate. For best results, leave undisturbed for 24 hours in ambient temperature conditions. ⚠ Important: Do not install in temperatures below 10°C or in direct sunlight where surface temperatures may exceed 40°C, as this can affect the adhesive cure quality and long-term bond strength. Complete Your Defender's Interior This treadplate is just one part of a considered interior upgrade. Browse our full Defender L663 collection for door sill guards, interior trims, and loadspace accessories — all engineered to the same standard of fit and finish. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify fitment against your specific vehicle's build specification before purchase.

Victorious Automotive · Defender L663 · Exterior Accessories 4-Piece Window Vent Visors & Rain Guards for Land Rover Defender 110 / 130 (2020–2026) L663 Keep fresh air flowing through your Defender's cabin in any weather — these precision-fitted vent visors deflect rain, reduce wind buffeting, and eliminate interior fogging without lifting a finger off the wheel. Defender L663 2020–2026 110 & 130 Wheelbase ABS Plastic Transparent Black Peel & Stick Fit 4-Piece Set Rain Guards Sun Shields Overview The Land Rover Defender L663 was designed to take on the world, and its owners expect every accessory fitted to it to match that standard. Whether you're commuting through city rain or crossing open countryside, the ability to crack a window without the cabin filling with water or buffeting wind noise is one of those small refinements that makes every journey noticeably more enjoyable. These 4-piece window vent visors are engineered specifically for the Defender 110 and 130 body variants. Manufactured from high-grade ABS plastic in a sleek transparent black finish, they integrate cleanly with the Defender's bold exterior lines — adding function without compromising form. The aerodynamic profile directs airflow upward and away from the window opening, allowing you to maintain a partially open window at any speed. Installation requires no drilling, no specialist tools, and no permanent modifications to your vehicle. The automotive-grade 3M-style adhesive tape bonds directly to the window channel trim, providing a secure, rattle-free fit that holds firm across temperature extremes. A tidy, confident addition to any Defender — for drivers who simply want more from their everyday drive. What's Included 🪟 Front Left Visor Driver-side window, pre-cut to profile 🪟 Front Right Visor Passenger-side window, pre-cut to profile 🪟 Rear Left Visor Rear door window, pre-cut to profile 🪟 Rear Right Visor Rear door window, pre-cut to profile 📋 Installation Guide Step-by-step fitting instructions included 🔧 Pre-Applied Adhesive Tape Automotive-grade adhesive, factory applied Product Highlights Precision-cut profile for the Defender 110 and 130 window channels High-grade ABS plastic — resistant to UV fade, cracking, and warping Allows ventilation while driving in rain, eliminating moisture build-up Reduces interior fogging and condensation on cold or damp days Aerodynamic shape minimises wind noise at motorway speeds Transparent black finish complements the Defender's exterior styling No drilling, no cutting — 100% non-destructive peel-and-stick installation Pre-applied automotive adhesive tape for a clean, flush fitment 100% brand new — quality inspected before despatch Compatible with both standard and long-wheelbase Defender variants Compatibility Model Variant Year Range Fitment Land Rover Defender 110 L663 — All Trims 2020–2026 Direct Fit Land Rover Defender 130 L663 — All Trims 2020–2026 Direct Fit Land Rover Defender 90 L663 — 3-Door 2020–2026 Not Compatible Land Rover Defender (Classic) Pre-2020 Models Pre-2020 Not Compatible Range Rover / Range Rover Sport All Variants All Years Not Compatible Installation Notes 🛠 DIY Friendly · Estimated Time: 30–45 Minutes · No Tools Required Thoroughly clean the window frame and channel trim where each visor will sit. Use a lint-free cloth with 50% isopropyl alcohol solution and allow to dry completely — any residue or moisture will compromise adhesion. Dry-fit each visor to confirm alignment and positioning before removing the adhesive backing. The visors are side-specific — check left and right orientation carefully before proceeding. Use a hot air gun or hair dryer on a low setting to gently warm the adhesive strip for 10–15 seconds. This activates the adhesive and significantly improves initial bond strength, especially in cold or damp conditions. Peel the adhesive backing and carefully position each visor, pressing firmly along its full length for at least 30 seconds to ensure full contact with the trim surface. Repeat for all four visors, then press each one again with firm, even pressure before leaving to cure undisturbed. Allow the adhesive to cure at ambient temperature for a minimum of 48 hours before exposing to water, high-pressure washing, or extreme weather. ⚠ Important: Do not run your vehicle through an automated car wash or use a pressure washer on the visor adhesive area for at least 48 hours post-installation. Premature water exposure is the single most common cause of fitment failure. Hand washing after the cure period is recommended for the first clean. Built for Defender Owners. Backed by Victorious. Explore our full range of exterior and interior accessories curated specifically for the Defender L663 — from window trim to protection film, every product is selected to match the Defender's standard. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Defender L663 · Interior Trim Carbon Fiber Central Console Panel Trim for Land Rover Defender 110 L663 (2020–2021) Real carbon fiber construction with a peel-and-stick fit — a clean, purposeful upgrade to one of the Defender's most visible interior touchpoints. Defender L663 2020–2021 Real Carbon Fiber 110 Wheelbase Central Console Trim Self-Adhesive Fit Interior Upgrade No Drilling Required Overview The 2020–2021 Land Rover Defender 110 L663 marked a defining moment in the Defender's history — a vehicle that balanced modern engineering with unmistakable character. The interior reflects that ambition, but for owners who want to push the cabin one step further, the central console area presents an obvious opportunity. It's a high-visibility zone, touched constantly and seen immediately by anyone who steps inside. This Real Carbon Fiber Central Console Panel Trim is designed specifically for the Defender 110 (2020–2021) interior layout, covering the console panel with precision-cut genuine carbon fiber that sits flush against the factory surface. The weave pattern is consistent and tightly finished, lending the kind of texture and depth that aftermarket plastic overlays simply cannot replicate. The result is a subtle but unmistakable elevation — one that reads as considered rather than accessorised. Installation requires no tools, no modification, and no permanent alteration to the vehicle. The trim arrives pre-backed with automotive-grade adhesive tape, the same category used across professional-fit interior applications. Clean the surface, peel the backing, and align carefully — the entire process takes minutes. For Defender owners who value the vehicle's integrity as much as its appearance, this is precisely the kind of upgrade worth making. What's Included 🪶 Carbon Fiber Console Trim 1 × real carbon fiber panel, pre-cut to fit 🔲 Pre-Applied Adhesive Tape Automotive-grade, factory-bonded to reverse side 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Genuine real carbon fiber construction — not vinyl wrap or ABS plastic Consistent 2×2 twill weave pattern with high-gloss resin finish Precision-cut for exact fitment on Defender 110 L663 (2020–2021) Pre-applied automotive-grade 3M-style adhesive tape on reverse Tool-free, no-drill installation — completely reversible Lightweight material — adds zero meaningful weight to the cabin Resistant to heat, UV fading, and interior wear over time Colour-fast finish that won't yellow or peel under normal use Seamlessly integrates with factory Defender interior aesthetics Compatible with both standard and upgraded Defender 110 interior trims Compatibility Model Code Year Range Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Not Compatible Land Rover Defender 110 L663 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None Park your Defender 110 in a clean, dry environment at room temperature. Cold or humid conditions can compromise adhesive bonding. Thoroughly clean the central console panel surface using an isopropyl alcohol wipe or equivalent. Remove all dust, grease, and residue and allow to dry completely. Test-fit the carbon fiber trim panel against the console surface without removing the adhesive backing. Confirm alignment and panel coverage before committing. Peel back a small section of the adhesive liner from one edge of the trim. Carefully align that edge with the console panel and press firmly into position. Slowly peel the remaining liner away while pressing the trim down progressively across its full length. Work from one edge to avoid air pockets. Apply firm, even pressure across the entire surface for 30–60 seconds. Pay particular attention to corners and edges to ensure full adhesion. Allow the adhesive to cure for a minimum of 24 hours before exposing the trim to direct heat, direct sunlight, or cleaning products. ⚠ Important: Do not attempt installation on a cold or freshly cleaned surface that has not fully dried. Adhesive performance is significantly reduced below 15°C (59°F). If the trim requires repositioning, work carefully to avoid stretching or creasing the carbon fiber panel. Complete Your Defender Interior This trim is one of the most immediate upgrades you can make to the Defender 110 cabin — real material, proper finish, zero compromise. Browse the full Defender L663 interior collection to find everything designed to the same standard. Shop Defender 110 (2020–2021) Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Exterior Lighting Dynamic LED Turn Signal Side Mirror Lights for Land Rover Defender 90 & 110 (2020–2024) A flowing sequential LED turn signal effect, precision-engineered for the Defender L663 — elevating both visibility and exterior presence in one seamless upgrade. Defender L663 2020–2024 Sequential LED Direct Fit Weather-Resistant Plug & Play Defender 90 Defender 110 Exterior Lighting Overview The Land Rover Defender L663 is a vehicle that demands accessories worthy of its character — purposeful, capable, and built to an uncompromising standard. Whether you're running the Defender 90 in a city environment or putting the 110 through its paces in demanding terrain, every exterior detail tells a story about how seriously you take the machine. These Dynamic LED Turn Signal Side Mirror Lights are designed exclusively for the 2020–2024 Defender generation. Rather than a simple static indicator, the sequential LED sweep creates a progressive, flowing light effect — similar to what you'd find on far more expensive modern performance vehicles. The result is a turn signal that's not only more visible to other road users, but genuinely distinctive and refined in its appearance. Constructed from high-grade weather-resistant materials, these units are built to endure the same conditions your Defender does. The fitment is direct — no cutting, no modification, no specialist tools. They integrate cleanly into the existing mirror housing and work seamlessly with the factory wiring, making this one of the most rewarding visual upgrades available for the current-generation Defender. What's Included 💡 Dynamic LED Turn Signal Lamp (Left) Sequential flowing indicator, driver side 💡 Dynamic LED Turn Signal Lamp (Right) Sequential flowing indicator, passenger side 🔌 Wiring Connectors Plug-and-play connection to factory harness 📄 Installation Guide Step-by-step reference for a clean install Product Highlights Sequential dynamic LED sweep for a premium, flowing turn signal effect Designed specifically for Land Rover Defender 90 & 110 L663 (2020–2024) Direct OEM-style fitment — no cutting or modification required Plug-and-play wiring that integrates with the factory electrical system Weather-resistant construction rated for all climates and terrain conditions Significantly improved lateral visibility for other road users Minimal power draw with long-life LED technology Consistent light output — no flickering or fading over time Subtle, purposeful aesthetic that complements the Defender's design language Sold as a complete pair — both mirrors covered in one purchase Compatibility Model Code Year Range Fitment Land Rover Defender 90 L663 2020–2024 Direct Fit Land Rover Defender 110 L663 2020–2024 Direct Fit Land Rover Defender 130 L663 2022–2024 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–40 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and ignition removed before beginning any work around the mirror housing. Carefully remove the existing mirror indicator lens by releasing the retaining clips on the side mirror housing — no tools or drilling required. Disconnect the factory indicator connector from the original unit and set aside the old lamp. Connect the new Dynamic LED Turn Signal Lamp to the factory wiring harness using the supplied plug-and-play connector. The connector is keyed to prevent incorrect fitment. Seat the new LED unit into the mirror housing, pressing firmly until the clips engage and the unit is flush. Repeat the process for the opposite mirror. Restore the ignition and test both indicators — left and right — to confirm the sequential sweep is functioning correctly. Note: If your Defender is covered by an active manufacturer or dealer warranty, we recommend consulting your authorised Land Rover retailer before installing aftermarket lighting components. Always ensure the indicator function is verified before returning the vehicle to road use. Built for Defenders. Trusted by Owners. Join over 12,300 Land Rover and Defender owners who've upgraded their vehicles with Victorious Automotive. Worldwide shipping via DHL, FedEx, UPS, and TNT — with a 30-day money-back guarantee on every order. Shop All Defender L663 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All manufacturer names, model designations, and vehicle codes referenced on this page are used solely for the purpose of fitment identification. All trademarks remain the property of their respective owners.

Victorious Automotive · Defender L663 · Interior Protection ABS Carbon Fiber Anti-Kick Tailgate Protection Panel Stickers — Land Rover Defender 110 (2020–2021) Precision-fit ABS carbon fiber trunk tailgate protection panels that guard your Defender 110's rear door from scuffs and kicks while adding a sharp, purposeful finish to the interior. Defender L663 2020–2021 ABS Carbon Fiber Anti-Kick Protection Tailgate Panel No-Drill Install Interior Trim Adhesive Fit Overview The Land Rover Defender 110 L663 reintroduced a legend for a new generation — blending rugged capability with a distinctly modern, purposeful interior. Every detail inside the Defender communicates intent, which makes the tailgate area — one of the most frequently used and most exposed surfaces in the cabin — worth protecting properly. These ABS carbon fiber anti-kick protection panels are designed specifically for the 2020–2021 Defender 110 trunk tailgate. Acting as a barrier against the everyday wear caused by loading, unloading, boots, and gear, they shield the factory trim from scratches, scuffs, and impact marks that accumulate over time. The carbon fiber texture finish integrates cleanly with the Defender's interior aesthetic without looking afterthought. Installation requires no drilling, no specialist tools, and no modification to the vehicle. Each panel arrives pre-cut to follow the exact profile of the Defender 110 tailgate and is backed with automotive-grade adhesive tape for a secure, residue-free bond. If you're particular about keeping your Defender's interior in the condition it deserves, this is a simple, effective upgrade. What's Included 🛡️ Carbon Fiber Tailgate Protection Panel 1× ABS carbon fiber anti-kick cover panel, pre-cut for Defender 110 trunk tailgate 🔧 Automotive Adhesive Tape Pre-applied 3M-style tape on the reverse for immediate, tool-free installation 📄 Installation Guide Step-by-step fitment instructions for a clean, bubble-free application Product Highlights Precision cut to fit the 2020–2021 Defender 110 trunk tailgate profile exactly ABS substrate with carbon fiber texture finish — lightweight yet impact-resistant Protects factory trim from kicks, scuffs, boot contact, and loading damage Sleek carbon fiber aesthetic complements the Defender's modern interior design Tool-free installation — no drilling, no cutting, no modifications required Automotive-grade adhesive backing ensures a strong, long-lasting bond Residue-free removal if repositioning is needed during installation UV-stable finish — will not fade, yellow, or crack over time Does not interfere with tailgate operation, hinges, or locking mechanism Adds a premium, purposeful look to a frequently overlooked area of the interior Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2024 Not Compatible Land Rover Defender 110 L663 2022–2024 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  |  🛠 Difficulty: Easy — No Tools Required Open the Defender 110 tailgate fully and ensure the interior panel surface is clean, dry, and free from dust, grease, or wax residue. Use an isopropyl alcohol wipe for best results. Dry-fit the carbon fiber panel against the tailgate trim area to confirm alignment and positioning before committing to adhesive contact. Peel back a small section of the adhesive backing tape, align one edge of the panel carefully, and press firmly into position. Gradually peel the remaining backing tape whilst pressing the panel flat against the surface — work from the centre outward to avoid trapping air bubbles. Apply firm, even pressure across the entire panel surface for 30–60 seconds. Allow the adhesive to cure for at least 2 hours before loading the vehicle. ⚠ Note: Do not install in temperatures below 10°C / 50°F — cold conditions reduce adhesive bond strength. Ensure the surface is completely dry before application. Once bonded, avoid removing and re-applying the panel as this may compromise adhesive performance. Complete Your Defender 110 Interior Explore our full range of precision-fit interior trim and protection accessories for the Defender L663 — every piece designed to complement the vehicle without compromise. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Always verify compatibility with your specific vehicle specification before purchase.

Victorious · Defender L663 · Storage Tailgate Window Storage Bag for Defender 90, 110 & 130 Keep essential gear organised and accessible with this purpose-built tailgate window storage solution for your modern Defender. L663 2020–2026 Multi-Pocket Design Direct Fit Tool Storage Overview Whether you're driving a Defender 90, 110, or 130, managing loose items in the cabin can become frustrating quickly. Tools, recovery gear, and daily essentials need a dedicated home—not rolling around the footwell or sliding across the dashboard during rough terrain. This Tailgate Window Storage Bag mounts directly to your Defender's rear window frame, transforming unused space into intelligent, accessible storage. The multi-pocket design keeps items organised and within arm's reach, while the purpose-engineered fit ensures no interference with visibility or functionality. Made to ISO9001 standards in premium facilities, it's built to withstand the demands of serious Defender ownership. Ideal for recovery kit components, tools, charging cables, maps, or emergency supplies—this is the kind of practical upgrade that makes every expedition feel more prepared and professional. What's Included 🎒 Storage Bag Assembly Multi-pocket organiser with mounting hardware 🔧 Fixing Brackets Stainless steel or polymer attachment points 📋 Installation Guide Step-by-step instructions for L663 models ✓ Quality Assurance ISO9001 certified manufacturing standard Product Highlights Tailgate window-mounted design—zero impact on cabin layout Multiple organised pockets for efficient gear separation Engineered for Defender 90, 110, and 130 models Durable materials built for off-road and daily use Tool and recovery kit ready—practical load capacity Easy installation without permanent modifications Direct-fit compatibility with 2020–2026 L663 generation Maintains full rear visibility and operational access ISO9001 factory quality—export-standard durability Protects cargo from road spray and weather exposure Compatibility Vehicle Model Year Range Fit Status Defender 90 (L663) 2020–2026 Direct Fit Defender 110 (L663) 2020–2026 Direct Fit Defender 130 (L663) 2020–2026 Direct Fit Defender (Pre-L663) 2004–2019 Not Compatible Range Rover / Sport All Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Open your Defender's tailgate fully and secure in position. Locate the window frame attachment points on the upper tailgate panel. Align the storage bag brackets with the mounting holes—brackets should sit flush against the frame. Fasten using the provided hardware (no drilling required); tighten evenly to ensure level installation. Load your gear gradually, testing that the bag sits securely and does not rattle during movement. Confirm rear visibility is unobstructed and the tailgate closes freely. Note: Avoid exceeding the designed load capacity to maintain structural integrity and prevent frame stress. Always check fitment after the first off-road outing to ensure hardware remains secure. Ready to Organise Your Defender? Smart storage transforms your Defender from a capable truck into a prepared, mission-ready companion. This tailgate window bag delivers exactly that—accessible, secure, and built to the standards Defender owners demand. Shop Defender Accessories Save 20% on two items with code 22GET20 4.9★ 12,300+ reviews ✓ 30-day money-back guarantee 📦 Worldwide DHL, FedEx, UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All product names and vehicle designations are used for compatibility reference only. Always consult your vehicle handbook and contact our team with any compatibility questions before purchase.

Victorious · Defender L663 · Interior Storage Aluminum Central Control Side Storage Bag Rack for Defender 90 & 110 Premium multi-function storage solution engineered to maximize cabin organization and interior refinement across the modern Defender range. Defender 90 / 110 2020–2024 Aluminum Alloy Direct Fit Adhesive Mount ISO 9001 Overview The Defender 90 and 110 (2020–2024) represent a decisive modernization of Land Rover's most iconic platform. Retaining uncompromising off-road pedigree, today's Defender demands cabin solutions that blend heritage practicality with contemporary aesthetics. This aluminum central control side storage rack addresses a genuine constraint: usable cabin storage that doesn't compromise design integrity. Constructed from aerospace-grade aluminum alloy and finished in subtle black, this multi-function rack mounts directly to the central control panel, creating dedicated storage for essentials—phones, cards, small accessories, navigation aids. Unlike flimsy clip-on alternatives, it becomes a permanent architectural element of your cabin, improving visual depth whilst eliminating dashboard clutter. Manufactured to ISO 9001 standards and already deployed across Land Rover markets globally, it's engineered for durability: scratch-resistant, wear-resistant, and purposefully designed to complement Defender's interior language. Simple adhesive installation means no drilling, no permanent modification, and reversibility if required. What's Included 📦 Aluminum Storage Rack Central control side-mounted module 🔧 3M Adhesive Strip Dual-sided mounting tape, pre-applied 📋 Installation Guide Step-by-step instructions included 🎁 Retail Packaging 100% new, factory-sealed box Key Features Aerospace-grade aluminum alloy construction Scratch- and wear-resistant surface treatment Direct-fit design for Defender 90 & 110 (2020–2024) Integrated multi-function storage compartments Matte black finish—integrates seamlessly with modern Defender interiors No drilling required—3M adhesive installation only ISO 9001 certified manufacturing Globally proven design—exported to 50+ markets Easy to install and reversible Improves cabin organization and visual tidiness Compatibility Model Year Range Fitment Defender 90 2020–2024 Direct Fit Defender 110 2020–2024 Direct Fit Defender 130 2021–2024 Verify Fit Older Defender (1983–2016) Pre-2020 Not Compatible Note: Always confirm fitment by comparing your vehicle's central control panel layout with provided images before ordering. Contact our team (+44 203 943 9919) with photos if unsure. Installation Difficulty: Beginner | Time: 10–15 minutes Prepare the surface: Clean the central control panel mounting area thoroughly with a microfibre cloth. Ensure no dust, dirt, or residue remains. Allow to dry completely. Remove adhesive backing: Gently peel the 3M protective film from the pre-applied dual-sided tape on the rear of the rack. Position and align: Carefully align the rack with your central control panel. Reference the provided images to confirm exact placement. Press firmly for 20–30 seconds to establish initial adhesion. Allow cure time: Do not wash or stress the vehicle for 48 hours. The adhesive requires full curing time to achieve maximum bond strength. Test security: After 48 hours, gently press and flex the rack to confirm stable mounting. It should move minimally if at all. ⚠️ Important: Failure to clean the mounting surface thoroughly will compromise adhesion. If your Defender has a textured or heavily contoured central control panel, the rack may not sit flush. Contact us before installation if you're uncertain about panel geometry. Ready to Refine Your Cabin Transform your Defender's central console into a purpose-built storage hub. This premium aluminum rack eliminates clutter, enhances interior organization, and restores cabin elegance—all without permanent modification. Shop Defender Storage Solutions Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL/FedEx ✓ +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Holdings, or any official Land Rover entity. All references to Land Rover, Defender, and related trademarks are for identification purposes only. Product fitment is the customer's responsibility; please verify compatibility before purchase.

Victorious Automotive · Defender L663 · Exterior Protection Front Bumper Guards & Side Trim in Black ABS — Land Rover Defender 110 & 130 (2020+) Purpose-built ABS protection that shields your Defender's front bumper and side edges from daily abrasion — without compromising its purposeful, commanding stance. Defender L663 2020–2024 110 & 130 ABS Plastic Gloss Black Direct Fit No Drilling Model: LLK2782 Overview The Land Rover Defender 110 and 130 are vehicles built to go anywhere — and they do exactly that. Whether you're navigating urban car parks, gravel estate tracks, or the kind of terrain that most vehicles simply refuse, the Defender earns its scuffs honestly. But that doesn't mean you should let them accumulate unchecked. The front bumper, in particular, is one of the most exposed areas on the L663, and even minor kerb strikes or loading bay nudges leave lasting marks on the factory finish. These Black ABS Front Bumper Guards and Side Trim have been designed precisely for the 2020-onwards Defender 110 and 130. Machined from high-grade ABS thermoplastic, they offer a rigid yet lightweight layer of protection that sits cleanly against the bumper's contours, absorbing contact before it reaches the factory surface beneath. The gloss black finish is matched to complement the Defender's bold exterior lines, making these guards as much a styling accent as a functional shield. Installation requires no specialist tools and no modification to the vehicle — the included automotive-grade adhesive tape creates a firm, weather-resistant bond that holds through everything a Defender day demands. For owners who want to preserve their vehicle's condition without altering its character, these guards are the considered choice. What's Included 🛡️ Front Bumper Guard Set 1 complete set, pre-formed to Defender L663 bumper profile 🔲 Side Trim Pieces Matching black ABS side trim for full coverage 📏 Adhesive Mounting Tape Automotive-grade 3M-style tape, pre-cut for each piece 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-formed specifically for the Defender 110 and 130 L663 (2020 onwards) High-impact ABS construction resists cracking, warping, and UV fading Gloss black finish complements both standard and Black Pack Defenders No drilling, no cutting — fully adhesive fitment preserves original bumper Protects against kerb strikes, loading contacts, and low-speed abrasion Lightweight at 500g — no perceptible effect on vehicle weight or handling Weather-sealed bond maintains adhesion in wet, cold, and high-heat conditions Easily removable without residue damage if you need to change or replace Works seamlessly with factory tow hooks and parking sensors Pairs well with wider Defender exterior protection and trim upgrades Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020 – 2024 Direct Fit Land Rover Defender 130 L663 2020 – 2024 Direct Fit Land Rover Defender 90 L663 2020 – 2024 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Range Rover Vogue L460 / L405 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes 🔧 DIY Friendly · Estimated Time: 20–30 Minutes · No Special Tools Required Park the Defender on a level surface and allow the bumper to reach ambient temperature — avoid fitting in direct sunlight or below 10°C for optimal adhesive performance. Thoroughly clean the bumper and side trim mounting areas using an isopropyl alcohol wipe or panel wipe solution. Remove all wax, grease, and road film. Allow to dry completely. Dry-fit each guard piece to confirm alignment and placement before removing the adhesive backing. Mark position lightly with a soft pencil or painter's tape if needed. Peel the protective liner from the pre-applied adhesive tape and carefully position each piece onto the bumper, pressing firmly from the centre outward to eliminate air pockets. Apply sustained firm pressure across the full surface of each piece for 30–60 seconds. Allow 24 hours of cure time before washing the vehicle or exposing to heavy rain. ⚠ Note: Ensure the bumper surface is completely free of moisture and residue before fitting. Fitting in cold or wet conditions may reduce initial adhesion. Professional installation is recommended if you are unsure about any step. Built for Defenders. Backed by Victorious. Every accessory we stock is chosen for owners who take their Defender seriously. Browse the full Defender L663 exterior collection — or save 20% when you add any two items to your order. Shop Defender L663 Accessories Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Defender L663 · Exterior Protection 2020 Land Rover Defender L663 Mud Flaps – Durable Modern Design Precision-fitted front and rear mud flaps engineered for the Defender L663, combining streamlined modern aesthetics with robust all-weather protection. Defender L663 2020–2026 Premium Plastic Front & Rear Set Modern Design Smooth Finish OE-Style Fitment Exterior Accessory Overview The Defender L663 is a vehicle built around purpose — a modern reinterpretation of an icon that demands accessories which match its intent. Whether navigating city streets or heading off-road, the L663's wide arches and bold stance expose the bodywork to stone chips, mud spray, and road debris in ways that standard trim pieces alone simply cannot address. These mud flaps are designed specifically for the 2020 Defender L663, engineered to complement the vehicle's clean, angular lines rather than interrupt them. Crafted from high-quality premium plastic with a smooth finish, they mirror the purposeful aesthetic of the Defender while quietly doing the job they were made for — keeping your lower bodywork, sills, and paintwork cleaner for longer. The streamlined cut means there's no visual bulk or afterthought appearance here. Fitted as a complete front and rear set, these guards integrate naturally into the Defender's profile, adding a layer of all-weather protection without compromising the vehicle's contemporary character. If you prefer a more rugged, textured look, we also offer the classic version — linked below in the outro section. What's Included 🔲 Front Mud Flaps (×2) Left and right, pre-formed for L663 front arch 🔲 Rear Mud Flaps (×2) Left and right, contoured for L663 rear arch 🔩 Installation Hardware All fixings, clips and fasteners included 📄 Fitting Guide Step-by-step installation reference Product Highlights Designed specifically for the 2020+ Defender L663 platform Modern smooth finish complements the Defender's clean aesthetic Premium-grade plastic construction for long-term durability Streamlined cut enhances aerodynamic profile at the arch Complete four-piece set — front and rear protection in one kit Shields sills and bodywork from mud, gravel, and road debris Maintains OE visual integration — no bulk or overhang Weather-resistant material suited to all climates and conditions All mounting hardware included for a straightforward fit Available alongside the classic textured version for style preference Compatibility Vehicle Code Year Range Fitment Land Rover Defender 90 / 110 / 130 L663 2020–2026 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender (Classic) L316 Pre-2016 Not Compatible Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 30–60 minutes  ·  Tools Required: Trim removal tool, screwdriver Park the vehicle on a flat surface and ensure the wheel arches are clean and dry before beginning fitment. Locate the existing mounting points behind the front and rear arch liners — these are factory-prepared positions on the L663. Test-fit each mud flap in position before securing, confirming alignment with the arch edge and panel line. Attach the mud flap using the supplied clips and fasteners, working from top to bottom to maintain correct positioning. Repeat for all four corners, checking each flap for even gap spacing and flush contact with the bodywork. Inspect all fixings for security and confirm no fouling with the tyre or suspension components at full lock. Note: Professional installation is recommended for best results and to avoid damage to arch liners or paintwork. Always verify compatibility with your specific Defender variant and trim level before fitting. Some model variants with factory arch protection packages may require minor adaptation. Complete Your Defender L663 Explore the full range of Defender L663 exterior accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Use code 22GET20 for 20% off when you purchase any two items. Shop Defender L663 Accessories 22GET20 — 20% off any 2 items Prefer a more rugged look? Discover the classic textured version here. ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender L663 110 Carbon Fibre Centre Console Air Outlet Frame (2020–2021) A precision-cut carbon fibre style trim that upgrades the Defender 110's centre console air vents with a refined, performance-inspired finish — installed in minutes, no tools required. Defender L663 2020–2021 Carbon Fibre ABS Centre Console Trim Air Outlet Frame No-Drill Install ISO9001 Certified Model: LLK2928 Overview The 2020–2021 Land Rover Defender 110 (L663) was engineered as a modern reinterpretation of one of the world's most iconic 4x4s. Its interior marked a dramatic shift — functional, purposeful, and built around a driver-first philosophy. For enthusiasts who want that interior to reflect their standards as much as their vehicle's capability, every detail matters. This centre console air outlet frame is designed specifically for the L663 Defender 110's 2020 and 2021 model years, fitting neatly over the factory air vent surrounds to deliver a clean carbon fibre aesthetic. The ABS substrate is finished with a genuine carbon fibre weave pattern, giving it the visual depth and texture of real carbon — at a weight and cost that makes sense for an interior upgrade of this nature. Where the factory plastic surround blends into the dashboard, this trim immediately draws the eye and grounds the centre console with a more purposeful, motorsport-influenced character. It complements both dark and light interior colour packs equally well, and pairs naturally with other carbon fibre or brushed metal interior upgrades throughout the L663 cabin. What's Included 🖤 Carbon Fibre Air Outlet Frame 1 x centre console trim piece, model LLK2928 🔧 Pre-Applied Adhesive Tape Automotive-grade 3M-style mounting tape 📄 Installation Guide Basic fitting reference included in packaging Product Highlights Precision-engineered for the Defender L663 110 (2020–2021) centre console air vent surround Carbon fibre weave ABS construction — lightweight, durable, and heat-resistant Retains full vent functionality — no impact on airflow or adjustment No drilling, cutting, or modification to factory components required Adhesive mounting system allows clean removal without residue damage ISO9001-certified manufacturing for consistent quality and fit tolerances Dimensions: 40cm (L) × 15cm (W) × 10cm (H) — engineered to OEM proportions Weighs just 300g — adds zero meaningful mass to the vehicle Pairs seamlessly with other L663 carbon fibre interior trim upgrades Direct, like-for-like fitment tested against 2020 and 2021 production Defender 110 interiors Compatibility Vehicle Code Years Fitment Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 110 L663 2022–2026 Not Confirmed Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  |  🛠 Difficulty: Beginner Begin with the vehicle at rest and the interior at room temperature — avoid fitting in direct sunlight or cold conditions where the adhesive may not bond correctly. Identify the centre console air outlet surround on your Defender 110. This sits centrally between the front seats, framing the horizontal vent array. Thoroughly clean the factory plastic surface using an isopropyl alcohol wipe or panel prep solution. Remove all dust, oils, and residue. Allow to dry completely. Test-fit the carbon fibre frame without removing the adhesive backing to confirm alignment and positioning. Note any reference points. Peel the adhesive backing and carefully position the trim, pressing firmly from the centre outward to eliminate air pockets. Apply sustained pressure for 30–60 seconds across the full surface. Allow the adhesive to cure for a minimum of 2 hours before touching or stressing the trim. Full bond strength is typically achieved within 24 hours. ⚠ Note: Ensure the adhesive surface is fully dry before fitting. Do not attempt installation immediately after cleaning — residual moisture will compromise the bond. If fitting in winter, warm the panel gently with a hairdryer before applying the trim. Upgrade Your Defender's Interior Explore our full range of Defender L663 interior accessories — from carbon fibre dash trim to instrument cluster surrounds — and build the cabin your Defender deserves. Shop Defender L663 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used solely for compatibility reference purposes.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 & 130 Aluminum Alloy Silver Door Speaker Cover Panel Trim — Set of 8 A precision-machined set of eight aluminum alloy speaker cover trims that replace the factory plastic finish with a refined, industrial-grade silver aesthetic — purpose-built for the 2020-onwards Defender L663. Defender L663 2020–2026 Set of 8 Aluminum Alloy Silver Door Speaker Trim Peel & Stick ISO9001 Certified Model: XYL0341 Overview The Land Rover Defender L663 was engineered to be capable without compromise — and its interior deserves the same standard. Whether you're driving a 110 or the longer-wheelbase 130, the cabin is a space you spend serious time in, and every surface matters. The door speaker surrounds are a subtle but consistently visible detail, and the factory plastic finish — functional as it is — leaves room for meaningful improvement. These aluminum alloy speaker cover panel trims are machined to match the precise dimensions and mounting geometry of the Defender L663's door speaker housings. Finished in a clean, brushed silver tone, they complement the Defender's utilitarian-meets-refined design language without trying to over-style it. The result is a cohesive upgrade that looks factory-correct but noticeably more premium. The complete set of eight covers every speaker position across the front and rear doors of the 110 and 130, meaning the cabin reads as consistently upgraded throughout — not a piecemeal modification. Installation requires no tools and no permanent modification to your vehicle: each trim bonds cleanly using a professional-grade peel-and-stick adhesive system, making this one of the most impactful interior changes you can make in under an hour. What's Included 🔊 8× Speaker Cover Trims Full set — front and rear door positions covered 🔩 Pre-Applied Adhesive 3M-grade peel-and-stick backing on each trim 📋 Installation Guide Step-by-step fitting instructions included 📦 Protective Packaging Each piece individually wrapped to prevent transit damage Product Highlights Precision-formed aluminum alloy construction for lasting rigidity and a quality-forward feel Brushed silver finish complements the Defender's interior design language naturally Complete set of 8 trims covers every door speaker position in the 110 and 130 Peel-and-stick installation — no drilling, no screws, no permanent modifications ISO9001 certified manufacturing ensures consistent dimensional accuracy across every piece Engineered specifically for the 2020-onwards Defender L663 body and door profile Lightweight at 300g total, with no impact on door close feel or weight distribution Resistant to everyday cabin wear — UV stable and easy to wipe clean Each trim measures 14cm × 14cm × 3cm for a precise, flush fit against factory panels Immediately reversible — no trace left on the original panels if removed Compatibility Vehicle Model Code Year Range Compatibility Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Range Rover Sport L461 L461 2022–2026 Not Compatible Range Rover Vogue L460 L460 2022–2026 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Start with a clean, dry cabin — allow the vehicle to reach ambient room temperature if possible. Cold interiors (below 10°C) can reduce initial adhesive bond strength. Using a microfibre cloth lightly dampened with isopropyl alcohol, clean each factory speaker panel surface to remove any dust, oils, or residue. Allow to dry fully for 2–3 minutes. Dry-fit each trim piece against its corresponding speaker panel before committing. Confirm alignment and confirm the trim sits flush with no gaps at the edges. Peel the protective backing from the adhesive layer on the first trim. Position carefully over the speaker panel — the adhesive bonds on first contact, so take your time aligning before pressing. Apply firm, even pressure across the full surface of the trim for 30–60 seconds to activate the adhesive bond. Work outward from the centre to avoid air pockets. Repeat for all remaining trims, working systematically across front doors before moving to rear doors. Allow 24 hours before exposing the trims to moisture or direct sunlight, giving the adhesive time to fully cure for a permanent hold. ⚠ Important: Confirm fitment for the Defender 90 before purchasing — speaker panel geometry may differ from the 110 and 130 variants. If you are unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility for your specific build date and specification. Upgrade Your Defender's Interior Today Explore our full range of Defender L663 interior accessories — designed by enthusiasts, built to the standard your Land Rover deserves. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Please verify compatibility with your specific vehicle before purchasing.

Victorious · Defender 110 · Storage Aluminum Alloy Trunk Right Storage Basket – Defender 110 L663 Premium multifunctional cargo organization for your 2020–2024 Defender 110, engineered from aerospace-grade aluminum alloy with precision fit and effortless installation. L663 2020–2024 Aluminum Alloy Trunk Storage Right Side Multifunctional Direct Fit Overview The Defender 110 L663 demands storage solutions that match its capability and character. Victorious has engineered this aluminum alloy trunk basket specifically for your 2020–2024 model, designed to maximize cargo capacity while maintaining the refined aesthetics your Defender deserves. Built from high-grade aluminum alloy, this storage basket combines lightweight durability with genuine resistance to scratches, wear, and corrosion. The right-side trunk placement provides intuitive access to frequently used gear, tools, or recovery equipment—without compromising interior space or comfort. Every basket is manufactured to ISO9001 standards in certified facilities and tested across thousands of Defenders worldwide. Installation takes minutes. The double-sided 3M adhesive backing requires zero drilling, modifications, or professional fitting. Simply clean, apply, and secure—your Defender's factory finish remains completely untouched. This is direct-fit engineering at its finest: no compromise on quality, no headache on installation day. What's Included 📦 Aluminum Alloy Basket Right trunk, finished black 🔧 3M Adhesive Backing Pre-applied, no tools needed 📋 Installation Guide Step-by-step, with fitment photos 🎁 Retail Packaging 100% new, boxed, ready to gift Product Highlights Aerospace-grade aluminum alloy – lightweight yet rigid Scratch and wear resistant – engineered for expedition use ISO9001 certified manufacturing – global quality standard 3M double-sided adhesive – no drilling, no tools required Right-side trunk placement – optimized cargo flow Black powder-coated finish – matches modern Defender interiors Precision-fit design – engineered for L663 2020–2024 only Multifunctional storage – tools, recovery, adventure gear Corrosion-resistant – tested in harsh climates worldwide Reversible fitment – returns to factory state with adhesive remover Compatibility Model Years Code Fitment Defender 110 2020–2024 L663 Direct Fit Defender 110 2016–2019 L550 Not Compatible Defender 90 2020–2024 L663 Not Compatible Defender 130 2020–2024 L663 Not Compatible Before ordering: Cross-reference your VIN or vehicle documentation with the L663 code and 2020–2024 production date. Fitment is specific to Defender 110 models only. If unsure, contact us at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation Difficulty: Beginner | Time: 5–10 minutes Prepare the surface. Clean the trunk area thoroughly with a lint-free cloth. Remove any dust, dirt, or residue. Allow 10 minutes for full drying. Verify fitment. Position the basket against the right trunk wall. Confirm alignment matches factory contours. Do not apply adhesive yet. Peel backing. Carefully remove the 3M adhesive backing from the rear face of the basket. Apply basket. Press firmly into position, starting from the top and working downward. Hold for 30 seconds to ensure full contact. Cure time. Do not wash, vacuum, or stress the adhesive for 48 hours. Allow the 3M bond to reach full strength. Load gradually. Start with light loads (5–10 kg) in the first week, then increase to full capacity as needed. Important: Do not install in temperatures below 10°C or above 40°C. Adhesive performance is optimized at room temperature. If removal is necessary later, use 90% isopropyl alcohol and a plastic scraper to gently lift the basket without damaging trim. Ready to Organize Your Defender 110? This aluminum alloy storage basket is built for explorers, weekend warriors, and everyday drivers who refuse to compromise on quality. Every basket is tested, certified, and backed by our 30-day money-back guarantee and worldwide shipping via DHL, FedEx, or UPS. Shop Defender 110 Accessories Save 20% on any 2 items. Use code 22GET20 at checkout. 4.9/5 · 12,300+ reviews 30-day money-back guarantee Worldwide shipping included Expert support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. This product is not manufactured, endorsed, or affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover subsidiary. All vehicle names and model codes are used for identification and compatibility purposes only. Fitment and performance are guaranteed for Defender 110 L663 models (2020–2024) only. Always verify your specific vehicle variant before purchase.

Victorious Automotive · Defender L663 · Interior Protection ABS Carbon Fiber Rear Armrest Box Anti-Kick Cover for Land Rover Defender 110 & 130 (2020+) A precision-formed ABS carbon fibre kick cover that guards the rear armrest box of your Defender L663 against everyday scuffs, scratches, and heel damage — with a factory-finish aesthetic that looks entirely at home. Defender L663 2020–2026 High-Quality ABS Carbon Fibre Finish Anti-Kick Protection No-Drill Install Rear Armrest Box Model: XYL1446 Overview The Land Rover Defender 110 and 130 (L663, 2020 onwards) represents an entirely new chapter for one of the most iconic vehicles ever made — and its interior reflects that ambition. Clean lines, purposeful surfaces, and a level of refinement that earlier Defenders never offered. Protecting those surfaces from the inevitable wear of daily life is where this rear armrest box anti-kick cover comes in. Engineered specifically for the rear centre armrest box panel area of the L663 Defender, this cover wraps the lower section in a durable, high-quality ABS shell finished in a striking carbon fibre texture. This is the zone that takes the most punishment from rear passengers — boots, bags, and casual contact all take their toll. Without protection, scuffs and scratches accumulate quickly and are disproportionately noticeable on an otherwise clean interior. The fit is precise and purposeful. Using automotive-grade adhesive tape, this cover applies cleanly without drilling, cutting, or any modification to the vehicle's original trim. The carbon fibre finish integrates naturally with the Defender's utilitarian-premium aesthetic, adding a layer of visual intent without looking out of place. A small upgrade with a quietly significant impact on the long-term condition of your interior. What's Included 🛡️ Anti-Kick Cover 1 × ABS carbon fibre rear armrest box protection panel 🔧 Adhesive Tape Pre-applied automotive-grade 3M-style mounting tape 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Designed exclusively for the Defender L663 110 & 130 (2020+) Premium ABS construction — rigid, lightweight, and durable Carbon fibre texture finish for a refined, sporty aesthetic Guards against scuffs, heel strikes, and surface scratches No-drill, no-modification installation — fully reversible Automotive-grade adhesive tape pre-applied for clean fitment Exact dimensions: 34cm (L) × 30cm (W) × 6cm (H) Lightweight at just 366g — no impact on vehicle dynamics Complements factory trim without looking aftermarket Maintains original panel access and armrest functionality Compatibility Vehicle Code Year Range Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Defender (Original) Pre-2016 All Years Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Begin by thoroughly cleaning the rear armrest box panel surface using an isopropyl alcohol wipe. Remove all dust, grease, and moisture, and allow to dry completely before proceeding. Offer the cover up to the panel to confirm alignment and fitment before removing any adhesive backing. Note the orientation and any contour points. Peel back a small section of the adhesive backing to expose the tape. Carefully position the cover from one edge, pressing firmly as you work across the surface to avoid air pockets. Once fully seated, apply firm and even pressure across the entire cover for 30–60 seconds to ensure maximum adhesive contact with the panel surface. Allow at least 72 hours before subjecting the cover to heavy use or pressure, giving the adhesive bond time to fully cure. Note: Do not apply in temperatures below 10°C — cold surfaces significantly reduce adhesive performance. Ensure the vehicle has been at room temperature for at least one hour before fitting. If your vehicle has been recently detailed or treated with a silicone-based product, clean the surface thoroughly before installation. Complete Your Defender's Interior Browse our full collection of Defender L663 interior accessories — from carbon fibre trims and armrest covers to dashboard overlays and door panel protectors. Every piece is selected to complement the Defender's character without compromising it. Shop Defender L663 Interior → 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or an authorised dealer of Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Defender 110 · Interior Trim Stainless Steel Black Interior Door Decorative Panel Trim for Defender 110 Premium stainless steel door panel upgrade that elevates your Defender 110's cabin aesthetic with a seamless, factory-quality finish. Defender 110 L663 2020–2025 Stainless Steel Direct Fit Adhesive Install Overview The Defender 110 is built for adventure, but the cabin deserves refinement. This stainless steel interior door trim panel upgrade transforms your door cards with a sophisticated black-finished accent that catches light beautifully and complements both modern and classic Defender interiors. Manufactured from premium-grade stainless steel and finished with a durable black coating, these panels are engineered to resist daily wear, scratches, and UV fading. The 3M adhesive backing ensures a permanent, rattle-free installation without drilling, fasteners, or modification to factory components. Whether you're refining your daily driver or building a bespoke expedition rig, this upgrade delivers a proportionate, understated luxury touch that Defender enthusiasts appreciate—subtle enough to feel authentic, striking enough to turn heads at the car park. What's Included 📦 Interior Door Panels (Set) Stainless steel with black finish 🔧 3M Adhesive Backing Pre-applied, ready to install 📋 Installation Guide Step-by-step, with prep tips ✓ Factory Packaging 100% new, unboxed condition Product Highlights Premium stainless steel construction with corrosion resistance Durable black anodized finish resists fingerprints and UV fade Direct fit for Defender 110 L663 (2020–2025) 3M adhesive backing—no drilling or fasteners required ISO 9001 certified manufacturing and quality control Scratch and wear resistant for long-term durability Seamless integration with factory door card design Quick, tool-free installation in under 30 minutes Improves visual appeal and perceived cabin quality Worldwide shipping via DHL, FedEx, UPS, or TNT Compatibility Vehicle Model Year Range Fitment Status Land Rover Defender 110 (L663) 2020–2025 Direct Fit Land Rover Defender 110 (L663) Pre-2020 Not Compatible Land Rover Defender 90 All Years Not Compatible Range Rover / Range Rover Sport All Years Not Compatible Note: Always verify fitment against your VIN and door card profile before ordering. Contact our team at +44 203 943 9919 if unsure. Installation Difficulty Level: Beginner | Time: 20–30 minutes Prepare the surface. Clean the door card thoroughly with a dry cloth to remove all dust, fingerprints, and debris. A clean surface is essential for adhesive bonding. Position and align. Dry-fit the panel against your door card to confirm placement and alignment. Use the factory geometry and any trim lines as guides. Remove adhesive backing. Carefully peel the 3M protective film from the rear of the stainless steel panel. Apply firmly. Press the panel onto the door card with steady, even pressure, starting from one edge and working across to avoid air pockets. Allow cure time. Do not wash, wipe, or apply moisture to the vehicle for 48 hours. This allows the adhesive to fully set and cure. ⚠️ Important: Confirm the panel matches your door card profile before removing the adhesive backing. Once applied, adhesive removal may damage the door card trim. If misaligned, carefully peel back slowly and reposition before the adhesive fully sets. Why Choose Victorious Automotive We specialise exclusively in Land Rover, Range Rover, and Defender accessories. Every product is vetted for quality, compatibility, and real-world durability by our in-house enthusiast team. This trim panel has been tested across thousands of Defender 110 builds and delivers consistent, professional results. Your satisfaction is guaranteed: if this panel doesn't meet your expectations, we'll refund or replace it within 30 days—no questions asked. Ready to Refine Your Cabin? Add this premium stainless steel interior door trim to your Defender 110 and experience the subtle luxury that sets your rig apart. Direct fit, durable, and designed for enthusiasts. Shop Defender 110 Accessories Save 20% when you buy any 2 items. Use code: 22GET20 ✓ 4.9/5 stars from 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT ✓ Expert support +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover dealer. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This product is designed for aftermarket enhancement only.

Victorious Automotive · Defender L663 · Cargo Organisation Trunk Divider Net for Land Rover Defender 110 & 90 (2020–2024) — L663 Custom-Fit Cargo Isolation Net A precision-engineered trunk divider net built exclusively for the L663 Defender — keeping luggage contained, pets separated, and your load bay organised on every journey. Defender L663 2020–2024 110 & 90 Premium Mesh Custom Fit Cargo Divider No-Drill Install Pet & Luggage Safe Overview The Land Rover Defender L663 was engineered for those who go further — whether that's a weekend trail, a cross-country overland build, or a daily drive that demands total practicality. The load bay of the Defender 110 and 90 is generous by design, but without the right organisation, loose cargo shifts, slides, and compromises both safety and the integrity of your interior. This Trunk Divider Net is purpose-built for the 2020–2024 Defender L663 platform, designed to slot precisely into the rear cargo area and create a defined barrier between luggage, equipment, and passengers or pets. The high-tensile mesh construction absorbs impact forces without stretching out of shape, and the mounting hardware integrates cleanly with existing anchor points — no drilling, no modification, and no permanent alteration to your vehicle. For Defender owners who treat their vehicle as a tool as much as a statement, this net delivers the kind of quiet, reliable functionality that simply works. It installs in minutes, disappears into the cabin aesthetic, and gives you confidence that what's behind the rear seats stays exactly where you put it — whatever the terrain. What's Included 🕸️ Trunk Divider Net Custom-fit mesh net for L663 Defender load bay 🔩 Mounting Hardware Set All fixings and clips required for installation 🪝 Anchor Hooks Heavy-duty hooks for load point attachment 📋 Installation Guide Step-by-step instructions included — manual available on request Product Highlights Custom-engineered fit for the Defender L663 110 and 90 load bay dimensions High-tensile premium mesh retains shape under sustained load and impact Tool-free installation — mounts to existing anchor points with no drilling Effectively isolates pets, luggage, and equipment from the passenger cabin Discreet low-profile design integrates with the Defender's utilitarian interior Reinforced edge stitching and durable border framing for long-term durability Fully adjustable tensioning to suit varying cargo heights and configurations Compatible with Defender 110 five-seat and seven-seat load configurations Removable and re-installable without tools — collapses flat for easy storage Ideal for overlanding, family travel, working vehicles, and pet transport Compatibility Model Year Range Variant Fit Defender 110 (L663) 2020–2024 5-Seat & 7-Seat Direct Fit Defender 90 (L663) 2020–2024 Standard Direct Fit Defender 130 (L663) 2022–2024 8-Seat Not Compatible Defender 110 (Pre-2020) Pre-2020 Previous Generation Not Compatible Range Rover Sport (L461) 2022–2026 All Variants Not Compatible Range Rover Vogue (L460) 2022–2026 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Open the Defender's rear tailgate and fold or remove any rear seat configurations as needed to access the full load bay area. Locate the existing OEM cargo anchor points and load loops in the boot — these are the primary attachment locations for the divider net. Attach the anchor hooks from the mounting hardware set to the designated load anchor points on both the floor and the upper load area brackets. Unroll and position the trunk divider net vertically across the desired separation point in the load bay, aligning the top and bottom edges with the hook attachment positions. Clip the net border to each anchor hook, working from one side to the other to ensure even tension across the full width of the net. Adjust the tensioning where applicable to ensure the net sits taut, upright, and flush — confirming there is no excess slack that could allow cargo movement. Close the tailgate and perform a brief check from the passenger cabin side to confirm the net is secure and correctly positioned before driving. ⚠ Important: Always verify your specific Defender variant and model year before purchasing. The Defender 90 and 110 share this net's compatibility, but load bay dimensions may vary slightly between seating configurations. Contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions before ordering. Complete Your Defender L663 Interior Explore our full range of Defender 110 and 90 accessories — from boot liners and cargo organizers to interior protection and styling upgrades, all engineered to the same standard. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Defender, Land Rover, and L663 — are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious Automotive · Defender L663 · Exterior Accessories 2020–2026 Land Rover Defender L663 Fuel Tank Cap Replacement — Locking Stainless Steel Cover A precision-engineered stainless steel fuel tank cap for the Defender L663, available in Black, Carbon, or Silver — with integrated lock and key set for security and style in equal measure. Defender L663 2020–2026 Stainless Steel Locking Cap Black / Carbon / Silver CE Certified Direct Fit Exterior Overview The Land Rover Defender L663 is a vehicle defined by intention — every surface purposeful, every detail considered. Whether you run the 90, 110, or 130 body style, owners who care about the full picture know that even utilitarian touchpoints like the fuel filler cap deserve an upgrade that matches the rest of the truck. This replacement fuel tank cap is engineered specifically for the Defender L663 platform, offering a direct swap for the factory cap with a premium stainless steel construction that resists corrosion, UV fading, and the kind of daily wear that comes with a vehicle actually used as intended. The integrated lock set — supplied with two keys — adds a practical layer of security without compromising the clean, flush aesthetic Defender owners expect. Available in three finishes — gloss Black, textured Carbon, and brushed Silver — this cap is designed to complement both stock Defender liveries and custom builds alike. Whether you're speccing out a Heritage Blue 90 or a Gondwana Stone 110, there's a finish here that sits right. Installation is tool-free and takes under five minutes, making it one of the sharpest upgrades per pound of effort you'll find for the L663. What's Included ⛽ Fuel Tank Cover Cap 1 × stainless steel locking cap — your chosen finish 🔑 Key Set 2 × matching keys included for the integrated lock 📦 Protective Packaging Secured for safe international shipping via DHL / FedEx 📋 Installation Guide Basic fitment instructions included in packaging Product Highlights Designed exclusively for the Defender L663 (2020–2026) platform Premium stainless steel construction for long-term durability Available in Black, Carbon, and Silver finish options Integrated locking mechanism with two included keys Direct replacement fit — no drilling or modification required Corrosion and UV resistant for all-weather performance CE certified for quality and safety assurance Lightweight at just 0.5 kg — no impact on vehicle dynamics Elevates the exterior detailing without altering OEM lines Compatible with both petrol and diesel Defender L663 variants Compatibility Vehicle Code Year Range Body Style Fitment Land Rover Defender 90 L663 2020–2026 3-Door SUV Direct Fit Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 130 L663 2022–2026 8-Seat SUV Direct Fit Land Rover Defender (Pre-2020) L316 Pre-2020 Classic Not Compatible Range Rover Sport L494 L494 2013–2022 5-Door SUV Not Compatible Range Rover Vogue L405 L405 2013–2021 5-Door SUV Not Compatible Range Rover Velar L560 L560 2018–2022 5-Door SUV Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the fuel filler flap using the release button inside the cabin or via the key fob, depending on your Defender variant. Grip the existing factory fuel cap firmly and rotate it counter-clockwise until it disengages. Set it aside if you wish to retain the original for reference. Inspect the filler neck opening and thread for any debris or residue. Wipe clean with a dry cloth if necessary before fitting the new cap. Align the new stainless steel cap with the filler neck and thread it clockwise by hand until snug. Do not overtighten — a firm, flush seating is sufficient. Insert one of the included keys into the integrated lock cylinder and turn to confirm the locking mechanism operates smoothly. Store the spare key in a safe location away from the vehicle. Close the fuel filler flap and visually confirm the cap sits flush with the surrounding bodywork before driving. ⚠ Important: Always ensure the fuel cap is fully seated and locked before operating the vehicle. An improperly fitted cap may trigger a fuel system warning light on the Defender L663's instrument cluster. If any fitment resistance is experienced, do not force the cap — contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before proceeding. Upgrade Your Defender L663 Today Join over 12,300 Land Rover and Defender owners who trust Victorious Automotive for premium exterior upgrades. Browse the full Defender L663 collection and find everything your truck deserves. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Defender, L663, and Land Rover — are the property of their respective owners and are used solely for the purpose of fitment identification and compatibility reference.

Victorious Automotive · Defender L663 · Exterior Trim Carbon Fuel Tank Cover Cap for Land Rover Defender L663 (2020–2026) A precision-finished carbon-look fuel cap cover that upgrades your Defender's exterior with a purposeful, modern aesthetic — without compromising function or security. Defender L663 2020–2026 Stainless Steel Carbon Finish Locking Cap CE Certified Direct Fit Exterior Trim Overview The Defender L663 was engineered as a genuine statement of intent — rugged, capable, and unmistakably modern. Owners of the 2020-onwards generation understand that every detail matters, whether that's approach angle or the finish on an exterior panel. It's a vehicle that rewards considered upgrades. This Carbon Fuel Tank Cover Cap is designed exclusively for the L663 platform. Constructed from high-grade stainless steel and dressed in a carbon fibre-effect finish, it replaces your factory fuel cap surround with something far more purposeful. The integrated locking mechanism adds a layer of security to one of the most exposed exterior access points on the vehicle, and two keys are included in the box so you're covered from day one. Installation requires no drilling, wiring, or mechanical knowledge — the peel-and-stick adhesive backing creates a clean, secure bond to the factory surface. It's the kind of detail that blends seamlessly into the Defender's aesthetic while quietly elevating it. Subtle enough that it looks factory, considered enough that enthusiasts will notice. What's Included 🔵 Fuel Gas Cap Cover Carbon-finish stainless steel, pre-fitted adhesive 🔑 2 × Keys For the integrated locking mechanism Product Highlights Carbon fibre-effect finish for a premium, modern appearance High-grade stainless steel construction — built to last Integrated locking mechanism for enhanced fuel security Two keys included straight out of the box Peel-and-stick installation — no drilling required Precision cut for direct fit to Defender L663 (2020+) CE certified — meets European product safety standards Lightweight at just 0.5kg — no added stress on panels Weather-resistant finish — holds up in all conditions Subtle upgrade that complements the Defender's factory styling Compatibility Vehicle Model Code Years Fit Land Rover Defender 90 L663 2020–2026 Direct Fit Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 130 L663 2022–2026 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender (Classic) L316 Pre-2016 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Thoroughly clean and degrease the fuel cap surround area on your Defender using an isopropyl alcohol wipe. Allow to dry completely before proceeding. Remove the backing from the pre-applied adhesive on the underside of the carbon cap cover, taking care not to touch the adhesive surface. Align the cap cover carefully over the factory fuel cap recess, ensuring the locking keyhole is correctly oriented for easy access. Apply firm, even pressure across the entire surface of the cover for 30–60 seconds to ensure a strong initial bond. Allow the adhesive to cure for a minimum of 24 hours before operating the locking mechanism or exposing to water or extreme temperatures. Test the locking function with both included keys before use. Store the spare key in a safe location separate from your vehicle. ⚠ Note: Confirm your exact Defender variant (90, 110 or 130) and model year before installation. This cover is engineered specifically for the L663 generation (2020-onwards) and is not compatible with earlier Defender platforms. If in doubt, professional fitting is recommended. Complete Your Defender Build Browse our full range of exterior accessories engineered specifically for the Defender L663 — from door handle covers to mirror caps, bonnet shields and beyond. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or associated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Defender L663 · Interior Trim ABS Carbon Fibre Seat Adjustment Frame Side Covers – Land Rover Defender 110 (2020–2021) A precision-fit interior upgrade that shields your Defender's seat adjustment frames from daily wear while delivering a sharp, purposeful carbon fibre aesthetic. Defender L663 2020–2021 ABS Carbon Fibre Seat Frame Covers Peel & Stick No Drilling Interior Trim Direct Fit Overview The Land Rover Defender 110 in its L663 generation brought a genuinely modern interior to a vehicle that had long traded on its raw mechanical character. For owners who have invested in that interior — whether in SE, S, X-Dynamic, or First Edition trim — maintaining the quality of every surface matters. The seat adjustment frame area, subject to constant contact from shoes, bags, and daily use, is one of the first places wear begins to show. These ABS carbon fibre seat adjustment frame side covers are engineered specifically for the 2020 and 2021 model year Defender 110. Each piece is formed from high-grade ABS and finished in a woven carbon fibre texture that reads as genuinely premium in person. They sit flush against the seat frame surround, covering the exposed base sections on both the driver and front passenger sides, protecting the original plastic from scuffs, scrapes, and UV fading without altering the seat's adjustability in any way. Installation requires no tools, no drilling, and no professional fitting — automotive-grade adhesive tape is pre-applied to the reverse of each cover, creating a bond that holds firmly through temperature variation and vibration. It's the kind of detail that Defender owners notice immediately, and that passengers simply assume was there from the factory. What's Included 🪑 Driver Side Cover Carbon fibre ABS, left-hand seat frame 🪑 Passenger Side Cover Carbon fibre ABS, right-hand seat frame 🔧 Pre-Applied Adhesive Automotive-grade tape, no tools required 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-moulded for the 2020–2021 Defender 110 seat frame geometry High-grade ABS construction with woven carbon fibre surface finish Protects original seat frame plastic from scuffs, scratches, and wear Pre-applied automotive adhesive tape for a clean, tool-free installation Does not impede seat adjustment levers, rails, or mechanisms Colour-consistent carbon texture that complements factory interior trim Resistant to temperature fluctuation and interior UV exposure Low-profile fit — no visible gaps, no lifting edges once bonded Covers both front seats — driver and passenger included as a pair Reversible installation — removable without damage to original surfaces Compatibility Vehicle Code Years Fit Land Rover Defender 110 L663 2020–2021 Direct Fit Land Rover Defender 90 L663 2020–2021 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🟢 Difficulty: Beginner Begin with both front seats fully accessible. Push each seat back to expose the lower frame surround and give yourself clear working space. Thoroughly clean the seat frame surface using an isopropyl alcohol wipe or equivalent. Remove all dust, grease, and residue — adhesion quality depends entirely on surface preparation. Allow the cleaned surface to dry completely for at least 2–3 minutes before proceeding. Test-fit each cover dry before removing the adhesive backing. Confirm alignment with the seat frame contours on both sides. Peel the protective film from the adhesive tape on the reverse of the cover. Align carefully and press firmly into position, applying sustained pressure across the full surface for 30–45 seconds. Repeat for the second cover on the opposite seat. Avoid adjusting the seat aggressively for at least one hour to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation in temperatures below 10°C / 50°F as cold conditions significantly reduce initial adhesive bond strength. If fitted in winter, allow additional curing time before use. Complete Your Defender Interior Explore our full range of Defender 110 L663 interior accessories — designed for owners who hold their vehicle to a higher standard. Shop Defender 110 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Defender L663 · Interior Trim Dashboard Decoration Trim in Chrome & Carbon Fiber Texture — Land Rover Defender 90/110 (2020+) A precision-cut ABS trim panel finished in silver chrome or carbon fiber texture, designed to elevate the Defender L663 dashboard with a refined, sports-inspired aesthetic — no drilling, no cutting, no compromise. Defender L663 2020–2024 90 & 110 ABS Material Chrome Finish Carbon Fiber Texture ISO9001 Certified Adhesive Fit Model: LLK2806 Overview The 2020 Land Rover Defender L663 redefined what a modern off-road icon could look like — utilitarian in form, yet unmistakably contemporary on the inside. The dashboard, in particular, is a prominent focal point of the cabin, and for owners who want to push that interior feel a step further, the standard trim panels leave meaningful room for personalisation. This Dashboard Decoration Trim from Victorious Automotive is purpose-engineered for the Defender 90 and 110 (2020 onwards). Available in a polished silver chrome or a deep carbon fiber texture finish, the panel is precision-moulded from high-grade ABS to align exactly with the factory contours of the Defender dashboard — delivering a seamless, factory-quality result without any modification to your vehicle. Whether you're building a more urban-premium aesthetic with the chrome finish or leaning into a performance-inspired look with carbon fiber texture, this trim integrates naturally with the Defender's existing interior language. It's a small upgrade with a genuinely noticeable impact — the kind of detail that Defender owners notice immediately and appreciate for years. What's Included 🪄 Dashboard Decoration Trim 1x ABS trim panel — chrome or carbon fiber finish 🔧 Automotive Adhesive Tape Pre-cut 3M-style double-sided tape for clean fitment 📄 Installation Guide Step-by-step fitment reference included Product Highlights Precision-moulded ABS for exact Defender L663 dashboard fitment Available in silver chrome or carbon fiber texture finish Adhesive installation — no drilling, no permanent modification ISO9001-certified manufacturing for consistent quality standards Lightweight at 300g — no impact on cabin ergonomics Compatible with both Defender 90 and Defender 110 (2020+) Resistant to everyday cabin heat and UV exposure Matches factory interior trim lines for a seamless OEM look Reversible fitment — can be removed without damaging the dashboard Dimensions: 30cm (L) × 15cm (W) × 10cm (H) for ideal panel coverage Compatibility Vehicle Code Year Range Fitment Land Rover Defender 90 L663 2020–2024 Direct Fit Land Rover Defender 110 L663 2020–2024 Direct Fit Land Rover Defender 130 L663 2022–2024 Verify Before Purchase Land Rover Defender (Pre-2020) L316 Pre-2020 Not Compatible Range Rover Sport L494 / L461 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: None Before beginning, ensure the Defender dashboard surface is clean and free from dust, grease, or moisture. A quick wipe with an isopropyl alcohol cloth is recommended for best adhesive performance. Dry-fit the trim panel against the dashboard to confirm alignment and verify the fitment before committing to installation. Peel back a small section of the adhesive tape backing, carefully align the panel to the dashboard contour, and press firmly from the centre outward to avoid air pockets. Remove the remaining tape backing as you press the panel fully into place, maintaining even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure at ambient cabin temperature for a minimum of 1–2 hours before exposing the vehicle to extreme heat or cold. ⚠ Note: While installation is straightforward for most owners, professional fitment is recommended if you are unfamiliar with automotive interior trim work. Ensure the vehicle interior is at room temperature before fitting — cold surfaces significantly reduce adhesive performance. Complete Your Defender Interior This trim pairs beautifully with our full range of Defender L663 interior accessories. Explore the complete collection and build the cabin your Defender deserves. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Please verify compatibility with your specific vehicle variant before purchase.

Victorious Automotive · Defender L663 · Interior Trim Land Rover Defender 110 Steering Wheel Trim Insert — Black / Oak Grain / Carbon Fiber (2020+) A precision-cut ABS steering wheel trim insert that brings a distinct, tailored finish to the Defender 110's cabin — available in three curated styles to complement any interior build. Defender L663 2020–2026 ABS Plastic Model: YW-1652 ISO9001 Certified Pre-Applied Adhesive Black / Oak Grain / Carbon Fiber 75g No-Drill Install Overview The 2020 Land Rover Defender L663 represented a complete reimagining of an icon — a vehicle that blends utilitarian heritage with genuinely modern interior design. The steering wheel sits at the centre of that experience, the point of contact between driver and machine on every journey. It deserves to look the part. This steering wheel trim insert (model YW-1652) is precision-cut from high-grade ABS plastic to slot flush into your Defender 110's steering wheel, filling the factory surround with a clean, refined finish. Choose from gloss Black for a stealthy, understated look, Oak Grain for a warmer, more distinguished character, or Carbon Fiber for a performance-forward aesthetic that pairs particularly well with darker cabin tones. Weighing just 75g and engineered with pre-applied adhesive backing, this is a trim upgrade that requires no tools, no drilling, and no specialist knowledge — just careful alignment and light pressure. ISO9001 manufacturing certification ensures the finish, fitment tolerances, and material quality are held to a consistent standard throughout production. What's Included 🎛️ Steering Wheel Trim Insert × 1 YW-1652 — available in Black, Oak Grain, or Carbon Fiber finish 🔖 Pre-Applied Adhesive Backing Factory-applied for a clean, no-mess install 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut ABS plastic for an exact, flush fitment on the Defender 110 steering wheel Three finish options — Black, Oak Grain, and Carbon Fiber — to suit every interior specification Pre-applied adhesive backing for a clean, tool-free installation ISO9001 certified manufacturing for consistent quality and finish tolerances Lightweight at just 75g — no impact on steering feel or airbag deployment clearance ABS plastic construction provides durability and resistance to everyday wear and heat Seamless OEM-style appearance that looks factory-fitted, not aftermarket Compatible with all trim levels of the 2020+ Defender 110 L663 No drilling, cutting, or permanent modification required Reversible upgrade — can be removed without damaging the original steering wheel Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2022 Not Compatible Range Rover Vogue L405 L405 2013–2021 Not Compatible Range Rover Velar L560 L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your Defender 110 on a level surface and ensure the steering wheel is in its natural centre position before beginning. Clean the steering wheel trim surround thoroughly using an isopropyl alcohol wipe to remove any dust, oils, or residue. Allow to dry fully — this step is critical for adhesive bond quality. Dry-fit the trim insert without removing the adhesive backing to confirm alignment and fitment before committing to the final placement. Carefully peel back the protective film from the pre-applied adhesive layer, taking care not to touch the adhesive surface. Align the trim insert precisely with the steering wheel surround, starting from one edge and pressing firmly along the entire surface to ensure full contact and a bubble-free bond. Apply firm, even pressure across the full length of the insert and hold for 30–60 seconds to activate the adhesive. Allow a minimum of 2 hours before driving to allow the adhesive to fully cure before the trim experiences vibration or movement. ⚠ Important: Do not install in temperatures below 10°C (50°F) as this can significantly reduce adhesive bond strength. Avoid cleaning the area with silicone-based products prior to installation. Always verify your exact vehicle model and year against the compatibility table before purchase — steering wheel designs can vary between trim levels and model years. Complete Your Defender Interior This steering wheel trim is just the start. Explore our full range of Defender L663 interior upgrades — from dashboard trim panels to gear surround inserts — all precision-engineered to the same standard. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of identifying product compatibility. Always verify fitment with your specific vehicle model and year before purchase.

Victorious Automotive · Defender L663 · Interior Trim Black ABS Steering Wheel Trim for Land Rover Defender L663 110 (2020–2026) A precision-engineered ABS steering wheel trim that instantly elevates the cockpit of your Defender L663 with a clean, blacked-out finish — no tools, no fuss. Defender L663 2020–2026 110 Wheelbase High-Grade ABS Gloss Black Peel & Stick Interior Trim Direct Fit Overview The Defender L663 110 represents Land Rover's boldest reinterpretation of an icon — a vehicle that blends serious off-road capability with a cabin that's increasingly expected to meet modern luxury standards. For owners who want every detail of their interior to reflect that ambition, the steering wheel is one of the most tactile touchpoints in the entire cabin and one of the first places where a considered upgrade makes an immediate difference. This black ABS steering wheel trim is designed from the ground up to suit the specific geometry of the L663's steering wheel, sitting flush against the existing surfaces without gaps, overhang, or misalignment. Moulded from high-grade ABS thermoplastic, it delivers a consistently matte-black or gloss-black aesthetic that complements the Defender's utilitarian-premium design language — whether your vehicle is trimmed in Ebony, Kvadrat, or the standard cloth finish. The installation method is intentionally simple: a clean peel-and-stick adhesive system means no drilling, no harness interference, and no risk to your vehicle's electronics or airbag system. It's the kind of upgrade that takes minutes but looks like it came from the factory — exactly what a well-specced Defender deserves. What's Included 🖤 Steering Wheel Trim × 1 Black ABS, pre-shaped for L663 steering wheel 🔧 Pre-Applied Adhesive High-bond 3M-grade backing tape included 🧹 Cleaning Prep Wipe For surface preparation before fitment 📄 Fitment Guide Step-by-step printed installation instructions Product Highlights Precision-moulded to match the exact profile of the L663 Defender steering wheel High-grade ABS construction — resistant to heat, UV exposure, and everyday wear Gloss black finish complements both dark and light interior colour schemes Tool-free peel-and-stick installation — no removal of steering wheel required Does not interfere with airbag deployment, buttons, or paddle shifters Lightweight design adds no perceptible weight or bulk to the wheel Colour-stable finish — resists fading and yellowing over time 100% brand new — not refurbished or remanufactured Easy to remove cleanly without leaving residue if needed Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Year Range Fitment Land Rover Defender 110 L663 2020–2026 Direct Fit Land Rover Defender 90 L663 2020–2026 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 / L461 2013–2026 Not Compatible Range Rover Vogue L405 / L460 2013–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your Defender on a level surface with the engine off. Ensure the steering wheel is in its default centre position. Use the included prep wipe to thoroughly clean the area of the steering wheel where the trim will be applied. Allow to dry completely — at least 2 minutes. Dry-fit the ABS trim piece against the steering wheel to confirm alignment and orientation before committing to adhesion. Peel back the adhesive backing film gradually as you position and press the trim firmly onto the steering wheel surface. Work from one end to the other to avoid air bubbles. Apply firm, even pressure across the entire trim piece for 30–60 seconds to fully activate the adhesive bond. Allow a minimum of 2 hours before driving to let the adhesive cure fully, particularly in cooler ambient temperatures. ⚠ Important: Do not attempt to install this trim while the engine is running or the vehicle is in motion. This trim is designed for the steering wheel surround only — keep clear of all airbag cover seams, controls, and horn pad areas. If you are unsure of any stage, contact our support team on +44 203 943 9919 before proceeding. Complete Your Defender Interior Thousands of Defender owners have trusted Victorious Automotive to deliver premium trim upgrades that look factory-fitted and last. Browse the full Defender L663 interior collection and finish what you started. Shop Defender L663 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are used solely for fitment identification purposes and remain the intellectual property of their respective owners. Product imagery is for illustrative purposes only — always verify compatibility with your specific vehicle variant before purchase.