New products

Jaguar · E-Pace · Interior Trim Matt ABS Interior Center Console Gear Shift Trim for Jaguar E-Pace 2018–2020 Refresh your E-Pace cabin with precision-engineered ABS trim that elevates the interior aesthetic instantly. E-Pace 2018–2020 ABS Plastic Matt Finish Interior Trim Direct Fit Overview The Jaguar E-Pace is a sophisticated compact luxury SUV that demands interior finishes worthy of its premium positioning. The center console and gear shift surround are focal points every time you settle into the driver's seat, and this matt ABS trim package transforms that space with a contemporary, refined aesthetic. This precision-cut ABS trim set is engineered specifically for E-Pace models from 2018 to 2020, delivering a factory-quality fit without the premium dealer pricing. The matt finish resists fingerprints and gloss, maintaining a sophisticated appearance through daily use. Installation is straightforward—no special tools or modifications required—making it an accessible upgrade for owners seeking cabin refinement. Whether you're refreshing a well-loved interior or personalizing a recently purchased E-Pace, this trim elevates perceived quality and adds a touch of modern sophistication to your driving environment. What's Included 📦 Center Console Trim Precision-molded ABS with matt finish ⚙️ Gear Shift Surround Complete coverage, direct fit ✓ Adhesive & Fasteners Installation hardware included 📋 Fitment Guide Step-by-step installation instructions Product Highlights High-quality ABS plastic – durable and lightweight Matt finish resists fingerprints and gloss Precision-cut for seamless fit on 2018–2020 E-Pace No modifications or special tools required Instantly upgrades cabin aesthetic UV-resistant formula maintains colour over time Easy to install – DIY-friendly process Professional factory appearance Affordable alternative to dealer pricing One-piece set ready to fit Compatibility Model Year Range Generation Fit Status Jaguar E-Pace 2018–2020 First Generation Direct Fit Jaguar E-Pace 2021+ Facelift & Beyond Not Compatible Jaguar F-Pace All Years — Not Compatible Jaguar XE / XF All Years — Not Compatible Installation Notes Difficulty Level: Beginner to Intermediate Estimated Time: 30–45 minutes Installation Steps Disconnect the vehicle battery (recommended safety precaution) Gently remove any trim panels or fascias surrounding the center console using a plastic trim tool Clean the mounting surface with a soft, dry cloth to ensure optimal adhesion Apply included adhesive evenly to the rear of the ABS trim panel Carefully position the trim piece, ensuring alignment with adjacent panels Press firmly for 30 seconds to establish a secure bond Allow adhesive to cure for 24 hours before use Reconnect the battery and test fitment Important: Do not force trim pieces into place. If alignment seems off, remove and reposition carefully. Trim may require minor adjustment during the first installation. Complete Your E-Pace Interior Refresh A refined cabin is the signature of a well-maintained luxury SUV. This trim upgrade is the perfect starting point for E-Pace owners seeking understated elegance and contemporary finishes. View E-Pace Collection Use code 22GET20 for 20% off any 2 items 30-Day Money-Back Guarantee 4.9/5 — 12,300+ Verified Reviews Worldwide Shipping — DHL, FedEx, UPS Mon–Fri 9am–7pm GMT — +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, its subsidiaries, or any of its official retailers and distributors. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility with the specified vehicle model and year range; fitment and results may vary based on individual vehicle condition and installation technique.

```html Jaguar · E-PACE · Interior Trim Rear Air Conditioning Vent Frame Trim for Jaguar E-PACE 2018–2020 Premium ABS interior trim upgrade that adds refined styling to your E-PACE cabin in minutes. E-PACE 2018–2020 ABS Plastic Rear AC Vent Direct Fit Overview The Jaguar E-PACE is a compact luxury crossover that deserves interior detailing worthy of its bold exterior. This rear air conditioning vent frame trim elevates your cabin's aesthetic with precision-engineered ABS construction that matches OEM fitment perfectly. Designed specifically for 2018–2020 E-PACE models, this single-piece trim frame wraps your rear AC vents in a refined, modern look that catches light beautifully. Unlike generic trim pieces, this is engineered to specification—meaning no filing, no gaps, and no guesswork during installation. Whether you're refreshing an aging interior or personalising a newer purchase, this upgrade delivers visible impact without breaking the bank or your weekend schedule. What's Included 📦 Rear AC Vent Frame Single precision-cut ABS trim piece ⚙️ OEM Fitment Direct bolt-in compatibility 2018–2020 🎯 Ready to Install No modification or trimming required ✔️ Quality Assured Tested for fit and finish consistency Product Highlights Precision-cut ABS construction—no warping or brittleness Exact OEM profile matches factory vent dimensions Seamless integration with factory interior trim Lightweight design reduces vibration and rattle Single-piece frame simplifies installation UV-resistant finish maintains colour and gloss Sourced from premium automotive-grade suppliers Complements factory Jaguar design language No tools or adhesives needed for fitment Immediate visual cabin refresh without interior strip-down Compatibility Vehicle Model Year Range Compatibility Jaguar E-PACE 2018–2020 Direct Fit Jaguar E-PACE 2021+ Not Compatible Other Jaguar Models All Not Compatible Installation Notes Installation Difficulty: Easy | Time: 10–15 minutes Open the rear door and locate the air conditioning vent frame in the cabin trim panel. Gently prise the existing vent frame outward using a soft plastic trim removal tool or credit card (avoid sharp tools that can mark trim). Carefully disconnect any wiring or clip attachments from the old frame (note their positions). Align the new ABS frame with the vent opening—it should slide into the factory recess smoothly. Press firmly around all edges until you hear or feel clips engage with the panel. Reconnect any wiring or clips to the new frame in their original positions. Close the rear door and inspect fitment from multiple angles—ensure no gaps or misalignment. Note: If the frame feels tight during installation, do not force it. Instead, check that all clips on the panel are properly seated. A gentle wiggle-and-push motion works better than applying brute force. Forcing can crack the ABS or damage panel clips. Ready to Elevate Your E-PACE Interior? Transform your cabin with this precision-engineered rear AC vent trim. Fits perfectly, installs in minutes, and delivers lasting visual impact. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars · 12,300+ Reviews ✓ Worldwide Shipping · DHL, FedEx, UPS 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, Jaguar, or any manufacturer. Product names and vehicle model designations are used solely for compatibility and identification purposes. All trademarks are the property of their respective owners. ```

```html Jaguar · E-Pace · Interior Protection Interior Door Sill Protect Plate Panel Cover Trim for Jaguar E-Pace 2018–2020 Premium stainless steel door sill protection plates that guard against scuffs while elevating your E-Pace's interior aesthetic. E-Pace 2018–2020 Stainless Steel Set of 4 Easy Install Overview The Jaguar E-Pace is a striking compact luxury SUV that demands attention to detail both inside and out. Your door sills are among the first contact points for passengers and one of the most vulnerable areas to scuffing from everyday wear—muddy boots, luggage, and daily entry take their toll on unprotected trim. These Interior Door Sill Protect Plate Panel Cover Trim sets deliver high-quality stainless steel protection engineered to shield against marks, scratches, and dirt transfer. Each precision-cut piece integrates seamlessly with the E-Pace's door frame, maintaining the factory aesthetic while introducing a subtle, professional chrome accent that catches light and elevates your cabin's premium feel. Installation is straightforward—no tools required, no drilling—and the adhesive backing ensures a permanent, rattle-free bond. Choose from three distinct styles to suit your personal taste, whether you prefer understated elegance or bold visual presence. What's Included 🛡️ 4 × Door Sill Plates Front and rear passenger-side coverage ✨ Premium Stainless Steel Precision-cut, corrosion-resistant finish 🎨 3 Style Options Select your preferred chrome profile and finish 📦 Ready to Install Pre-cut, pre-finished, adhesive-backed Product Highlights High-quality precision-cut stainless steel construction Corrosion-resistant finish maintains appearance year-round Factory-fit design matches E-Pace door sill geometry perfectly Three distinct style options to suit personal preference No-drill, adhesive installation—under 10 minutes total Protects against scuffs, marks, dirt transfer, and wear Chrome moulding adds premium, bespoke cabin ambiance Complete 4-piece set covers all door entry points Easy to clean and maintain; resists fingerprints Lifetime durability with proper care Compatibility Vehicle Model Code Year Range Fit Jaguar E-Pace C741 2018–2020 Direct Fit Jaguar E-Pace C741 2021+ Not Compatible Jaguar F-Pace All Years — Not Compatible Jaguar I-Pace All Years — Not Compatible Note: This product is designed exclusively for 2018–2020 Jaguar E-Pace models. Fitment varies by model year and generation. Confirm your vehicle year before purchase. Installation Installation Difficulty: Beginner | Time: ~10 minutes Clean the door sills: Use a microfibre cloth and mild soap solution to remove all dirt, dust, and residue from the E-Pace door sill trim. Allow to dry completely (2–3 minutes). Prepare the surface: Lightly buff the sill with a clean, dry cloth to ensure the adhesive backing makes full contact. Do not use abrasive materials. Peel and position: Carefully remove the adhesive backing from the first plate. Align it precisely with the door sill edge, starting at the front corner. Press and hold: Apply firm, even pressure across the entire length of the plate for 10–15 seconds to activate the adhesive bond. Repeat for all four plates: Follow steps 2–4 for the remaining door sills (passenger front, passenger rear, driver front, driver rear). Cure time: Allow 24 hours before exposing the sills to water or heavy use to ensure full adhesive set. ⚠️ Important: Do not install on damp, dusty, or textured surfaces. Ensure E-Pace is parked indoors during installation. If you live in a cold climate, allow the vehicle to warm to room temperature before applying the plates. Poor surface preparation is the leading cause of premature lift-off. Ready to Protect Your E-Pace? Preserve your Jaguar's interior trim and add a touch of luxury chrome detail in minutes. These precision-engineered door sill plates are engineered to outlast, outshine, and outperform—backed by our 30-day money-back guarantee. Shop Door Sill Plates Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 stars • 12,300+ reviews 🚚 Worldwide shipping • DHL, FedEx, UPS ✓ 30-day guarantee • No questions 📞 +44 203 943 9919 • Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with Jaguar Land Rover, JLR, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is designed for use as an aftermarket enhancement only and does not constitute an endorsement by Jaguar Land Rover. Vehicle compatibility information is provided for reference only; please verify fitment with your vehicle documentation or contact our support team before purchase. ```

Exterior Trim · Jaguar E-Pace · Chrome Moulding Stainless Steel Chrome Side Door Trim for Jaguar E-Pace (2018–2020) Premium precision-cut stainless steel side door moulding that elevates your E-Pace's exterior in minutes. Jaguar E-Pace 2018-2020 Stainless Steel Chrome Finish 4-Piece Set Easy Install Overview The Jaguar E-Pace deserves exterior details that match its refined design language. These stainless steel chrome side door mouldings add a sophisticated edge to your vehicle's profile whilst maintaining authentic design integrity. Whether your E-Pace sits in an urban driveway or navigates country roads, these trims catch light beautifully and enhance the premium feel of your Jaguar. Each set comprises four precision-cut pieces engineered to fit the door line of 2018–2020 E-Pace models perfectly. The high-quality stainless steel resists oxidation and weathering, ensuring your investment looks sharp for years. Available in two colour variants to suit your preference—choose the shade that complements your E-Pace's exterior best. Installation is straightforward, requiring no specialist tools or permanent modifications. Most owners complete the job in under an hour, making this one of the quickest wins for exterior refinement. The adhesive backing ensures a clean, secure fit with zero drilling or fastener complications. What's Included 📦 4-Piece Moulding Set One per door side ✨ Premium Stainless Steel Corrosion-resistant finish 🎨 Two Colour Options Choose your preferred variant 🔧 Adhesive Backing No tools or drilling needed Product Highlights Precision-cut stainless steel construction Chrome finish maintains lustre in all weather Fits 2018–2020 Jaguar E-Pace door profile perfectly Two colour variants for design flexibility Adhesive backing—no drilling required Tool-free installation in under one hour Corrosion and oxidation resistant Authentic exterior enhancement Durable long-term finish quality Instantly upgrades vehicle presence Compatibility Model Year Range Status Jaguar E-Pace 2018–2020 Direct Fit Jaguar E-Pace 2021+ Not Compatible Other Jaguar Models All years Not Compatible Installation Notes Difficulty: Easy | Time: 45–60 minutes Clean and dry all four door sides thoroughly. Use rubbing alcohol to remove any residue or wax. Measure and mark placement lines on each door to ensure symmetrical alignment. Carefully peel back the adhesive backing on the first moulding piece. Position and press firmly onto the door line, working from top to bottom to avoid air bubbles. Repeat for all four door sides, checking alignment as you progress. Allow 24 hours of cure time before exposing the trims to water or car washing. Important: Ensure door surfaces are completely clean and dry before application. Poor surface preparation may result in compromised adhesion. Do not apply in temperatures below 10°C or above 35°C. Elevate Your E-Pace Today Transform your Jaguar E-Pace's exterior presence with these premium stainless steel side door trims. Quality engineering meets straightforward installation—elevate your vehicle in less than an hour. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9/5 Stars – 12,300+ Reviews ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ Expert Support – +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, or any official Jaguar dealership. All product names and vehicle model designations are used for identification purposes only. Always verify compatibility with your vehicle before purchase.

Victorious Automotive · Range Rover Evoque L538 · Interior Pedals & Footrests Stainless Steel Dead Pedal Foot Rest for Range Rover Evoque 2012–2019 (L538) — Left Hand Drive A precision-fit dead pedal upgrade that brings a factory-premium feel to your Evoque's driver footwell — crafted from brushed stainless steel with a durable black plastic base for a clean, lasting finish. Range Rover Evoque L538 2012–2019 Left Hand Drive Only Stainless Steel Black Plastic Base Dead Pedal / Foot Rest Interior Upgrade 150g Lightweight CE Certified No Drilling Required Overview The Range Rover Evoque L538 — produced between 2012 and 2019 — set a new benchmark for compact luxury SUVs when it arrived. With its distinctive coupé-inspired silhouette, premium interior appointments, and dynamic driving character, the Evoque attracted owners who demanded more from every detail of their vehicle. The driver's footwell is no exception: long motorway journeys and spirited driving both deserve a foot rest that feels as considered as the rest of the cabin. This dead pedal foot rest is designed specifically for the Evoque L538 in left hand drive configuration, slotting precisely into the driver's footwell to provide a solid, comfortable resting point for the left foot. The combination of brushed stainless steel and black plastic delivers both visual refinement and long-term durability — resisting scuffs, wear, and the kind of daily abuse that original rubber mats simply can't handle. At just 150g, this is one of those understated upgrades that you'll notice every single drive — a satisfying solidity underfoot that elevates the feel of the entire driving environment without altering the factory aesthetic. It's the kind of detail that separates a well-kept Evoque from an exceptional one. What's Included 🦶 Dead Pedal Foot Rest Cover Brushed stainless steel face with black plastic mount base 🔩 Fixing Hardware All necessary fixings included for a secure, rattle-free fit 📋 Installation Guide Step-by-step fitting instructions for a hassle-free install Product Highlights Precision-engineered for the Range Rover Evoque L538 (2012–2019) footwell dimensions Brushed stainless steel surface — resists scratching, scuffing, and long-term wear Black plastic base provides a secure, vibration-free mounting platform Left hand drive specific design — perfect fit for LHD driver footwells only Lightweight at 150g — no impact on pedal ergonomics or driving dynamics CE certified — independently tested and verified for quality and safety Complements factory interior trim without altering the OEM aesthetic Simple, tool-minimal installation — no permanent modifications or drilling Adds lasting comfort on long drives by providing a dedicated left foot rest point An affordable interior upgrade that delivers a noticeably premium feel every drive Compatibility Model Generation Year Range Drive Fitment Range Rover Evoque L538 (First Gen) 2012–2019 Left Hand Drive Direct Fit Range Rover Evoque L538 (First Gen) 2012–2019 Right Hand Drive Not Compatible Range Rover Evoque L551 (Second Gen) 2019–Present All Not Compatible Range Rover Sport L494 — 2013–2020 All Not Compatible Land Rover Discovery Sport — All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 minutes  ·  Tools Required: None / Minimal Ensure the driver's footwell is clean and free of debris before beginning installation — wipe down the existing foot rest area with a dry cloth. Remove any existing OEM rubber foot rest cover or mat from the driver's footwell if present. Align the new stainless steel foot rest cover over the mounting area, ensuring the black plastic base sits flush and level against the footwell floor. Secure using the provided fixing hardware — press or clip firmly into place until the unit is stable and rattle-free. No drilling or permanent modification is required. Apply light pressure across the surface to confirm the fitment is secure, then test by resting your foot naturally to verify comfort and stability before driving. ⚠ Important: This foot rest is designed exclusively for Left Hand Drive Range Rover Evoque L538 models (2012–2019). Attempting to fit this item to a Right Hand Drive vehicle or any other model will result in an incorrect fit. Please confirm your vehicle's drive configuration before ordering. Upgrade Your Evoque's Footwell Today Shop the full Range Rover Evoque L538 accessories collection at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Worldwide shipping via DHL, FedEx, UPS, and TNT. Protected by our 30-day money-back guarantee. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

AOSRRUN · JAGUAR · INTERIOR UPGRADE Wireless Car Charger for Jaguar F-Pace, XE & XF (2016–2019) Keep your device charged on every drive with seamless wireless charging, engineered for modern Jaguar sedans and SUVs. Jaguar F-Pace Jaguar XE Jaguar XF 2016–2019 Wireless Qi Charging ABS Construction Direct Fit Overview Jaguar's F-Pace, XE, and XF represent some of the most refined luxury vehicles on the road—crafted for drivers who demand both performance and convenience. Whether you're navigating city streets in an XE, commanding the road in an XF, or exploring beyond the tarmac in an F-Pace, one thing remains constant: the need to keep your smartphone charged and within arm's reach. The AOSRRUN Wireless Car Charger integrates seamlessly into your Jaguar's interior, offering Qi-certified wireless charging without the clutter of cables. Simply place your compatible device on the charging pad—there's no pairing, no learning curve, no fumbling with connections. The charger is engineered in precision ABS plastic, finished to match Jaguar's premium trim standards, and delivers reliable power for all major smartphone platforms. This is a direct-fit upgrade for model years 2016 through 2019, spanning the entire F-Pace X761 SUV range, XE X760 sedan lineup (Pure, R-Sport, S, Premium, Prestige, and 2019 variants), and XF X260 sedans and Sportbrake models. Installation is straightforward, taking approximately 15 minutes with no modifications to your vehicle's electrical system. What's Included ⚡ Wireless Charging Pad Qi-certified, 10W output 🔌 Power Harness Direct clip to factory harness 🛠️ Installation Hardware Trim rings, clips, fasteners 📖 Step-by-Step Guide Illustrated with vehicle-specific notes Product Highlights Qi-certified wireless charging—no proprietary adapters needed ISO9000 certified design and manufacturing ABS composite construction for durability and finish quality Fits all F-Pace X761 (2015–2019), XE X760 (2015–2019), and XF X260 (2015–2019) models 10W fast-charging output for iPhones, Samsung, and all Qi-compatible devices Factory-matched trim ring—blends seamlessly into your cabin No modification to electrical wiring required Compact footprint—minimal dashboard/console intrusion Cool-touch surface—prevents overheating in direct sunlight 5-year manufacturer warranty included Compatibility Model Years Fit Jaguar F-Pace (X761) 2015–2019 Direct Fit Jaguar XE (X760) 2015–2019 Direct Fit Jaguar XF (X260) Sedan 2015–2019 Direct Fit Jaguar XF Sportbrake (X260) 2017–2019 Direct Fit Other Jaguar models All years Not Compatible Installation Difficulty: Intermediate | Time: 15–25 minutes Disable the vehicle's ignition and allow the cabin to cool for 10 minutes. Remove the center console trim panel using the provided trim tool (gently pry at marked seams). Locate the factory power distribution point beneath the console—it's pre-wired for accessories. Connect the charger's power harness to the factory harness using the locking connector (one-way design; it only fits correctly). Position the charging pad in the designated console cavity and secure using the included clip fasteners. Apply the factory-matched trim ring around the perimeter of the pad—it should sit flush with the surrounding surface. Reinstall the center console trim panel, checking that all clips are seated. Reconnect the vehicle battery, start the engine, and test the charger (you'll see a blue LED indicator). ⚠ Note: Do not force the power connector. If it doesn't slide in smoothly, it may be rotated 180°. The correct orientation is self-evident once aligned. Ready to Upgrade Your Jaguar? The AOSRRUN Wireless Charger transforms your F-Pace, XE, or XF into a modern charging hub. No more cables. No more fumbling. Just clean, seamless wireless power every time you drive. Shop Now Use code 22GET20 to save 20% on any two items. ⭐ 4.9/5 stars from 12,300+ verified reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 Call us: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover, Jaguar Cars, or any official Jaguar entity. All vehicle references are for fitment compatibility only. Please verify fitment with your vehicle's documentation before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Protection Front & Rear Bumper Guard Protection Plates for Range Rover Sport L494 (2018–2021) Precision-laser-cut stainless steel bumper guard plates engineered to shield the front and rear bumpers of your 2018–2021 Range Rover Sport from road debris, scratches, and daily wear — without compromising its commanding aesthetic. Range Rover Sport L494 2018–2021 Stainless Steel Front & Rear Drill-Free Fitment Laser Cut Exterior Protection Direct Bolt-On Overview The 2018–2021 Range Rover Sport L494 is one of the most visually assertive SUVs on the road — a vehicle that earns its presence whether navigating city streets or covering open terrain. Its low-slung bumper lines and sculpted lower body panels are defining design features, but they're also among the most exposed surfaces to stone chips, kerb contact, grit, and trailing debris. Over time, even minor accumulation of wear on these areas begins to undermine the confidence the Sport is designed to project. These Front and Rear Bumper Guard Protection Plates are designed specifically for the L494 Sport's 2018–2021 facelift generation, using precision laser-cutting to match the exact contours of the bumper's lower face. Manufactured from high-grade stainless steel, each plate delivers genuine structural defence against mud, gravel, and road debris — acting as a sacrificial shield between the elements and your original paintwork. Unlike generic universal guards, these plates integrate flush with the bumper line, maintaining the Sport's purposeful silhouette rather than disrupting it. Installation requires no drilling, no cutting, and no specialist tools. The plates bolt directly onto existing mounting points using the hardware provided, meaning fitment is clean, reversible, and achievable at home in under an hour. For owners who refuse to let daily mileage take the edge off a vehicle they've invested in, these plates are a straightforward, high-quality solution. What's Included 🛡️ Front Bumper Guard Plate Laser-cut stainless steel, L494 Sport fitment 🛡️ Rear Bumper Guard Plate Matched pair, same material and finish 🔩 Mounting Hardware All fixings required for direct bolt-on installation 📄 Installation Instructions Step-by-step fitment guide included Product Highlights Precision laser-cut for exact flush fit on the L494 Sport bumper profile High-grade stainless steel construction resists corrosion and impact Covers both front and rear bumper lower sections in one package Protects original paintwork from stone chips, grit, and debris Drill-free, direct bolt-on installation onto OEM mounting points No special tools required — achievable with standard home equipment Reversible fitment — fully removable without leaving permanent marks Maintains the Sport's factory aesthetic without visual compromise Designed specifically for the 2018–2021 L494 facelift generation Enhances the purposeful, rugged stance of the Range Rover Sport Compatibility Model Generation / Code Year Range Fitment Range Rover Sport L494 (Facelift) 2018–2021 Direct Fit Range Rover Sport L494 (Pre-Facelift) 2013–2017 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: Basic hand tools only Ensure the vehicle is parked on a flat, stable surface and the ignition is off. Allow the bumper area to cool if the vehicle has been recently driven. Clean the front and rear bumper lower surfaces thoroughly with a dry microfibre cloth to remove any dirt, grease, or moisture that could affect fitment alignment. Locate the existing OEM mounting points on the lower bumper — these are the anchor positions the guard plates are designed to align with directly. Offer up the front guard plate to the bumper, aligning the pre-drilled holes with the OEM mounting points. Confirm flush contact across the full width before securing. Hand-tighten the provided fixings first to confirm alignment, then tighten to the recommended torque using the included hardware. Do not over-tighten stainless steel fixings. Repeat the same process for the rear bumper guard plate, ensuring equal gap consistency along the lower edge. Step back and visually inspect both plates for level fitment and symmetry. Wipe down with a clean cloth to remove any fingerprints before driving. ⚠ Important: Confirm your exact model year is 2018–2021 L494 before installation. The facelift and pre-facelift L494 bumpers differ in profile. Fitting to an incompatible year may result in poor alignment or gaps. If in doubt, contact us before proceeding. Built for Range Rover Sport Owners Who Demand More At Victorious Automotive, every accessory we carry is selected for owners who take their vehicle seriously. These bumper guard plates are a practical investment in preserving the condition and appearance of your 2018–2021 Range Rover Sport L494 — one that pays for itself the first time it deflects a stone chip that would have gone straight to bare metal. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced — including Range Rover, Range Rover Sport, and L494 — are the property of their respective owners and are used solely for the purpose of fitment identification and compatibility reference.

Victorious Automotive · Range Rover Velar · Exterior Styling Rear Bumper Lower Diffuser Conversion for Range Rover Velar 2017+ Transform your standard Velar's rear end into the commanding Dynamic specification look — with a precision-engineered lower diffuser conversion that slots cleanly into place. Range Rover Velar 2017 Onwards Rear Diffuser Dynamic Conversion Laser Cut Precision Direct Fit Exterior Styling No Drilling Required Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — an SUV that blends architectural elegance with serious road presence. From launch, the Velar's Dynamic specification set it apart with a more aggressive lower rear treatment, featuring a pronounced diffuser section that gives the car a planted, performance-ready stance. If your Velar left the factory without it, you've likely noticed the difference. This rear bumper lower diffuser conversion is engineered specifically to replicate the Dynamic specification aesthetic on standard-trim Velars. Manufactured to exacting tolerances using laser-cut processes, each piece is shaped to match the precise geometry of the Velar's rear bumper — delivering a seamless result that looks entirely factory-fitted. No filler, no guesswork, no compromise on finish quality. Whether you're looking to complete a full exterior refresh or simply elevate the rear profile of your Velar to match the top-of-the-range spec, this conversion delivers the visual upgrade with the kind of fit and finish you'd expect from a premium aftermarket specialist. It's the detail that makes the difference. What's Included 🔲 Lower Diffuser Panel Dynamic-spec rear bumper lower section conversion piece 🔩 Fitting Hardware All required fixings and mounting clips included 📋 Installation Guide Step-by-step fitment instructions for a clean install ✅ Quality Check Tag Each unit inspected before dispatch Product Highlights Converts standard Velar to Dynamic rear specification Laser-cut manufacturing for precision panel alignment Direct fit — no cutting, drilling or modification required Designed specifically for Range Rover Velar 2017 onwards High-quality construction built to withstand road conditions Seamless integration with existing rear bumper geometry Clean, factory-finish appearance when installed correctly Lightweight — does not affect vehicle dynamics or performance Supplied with all necessary fitting hardware Straightforward installation suitable for home fitting Compatibility Vehicle Year Range Trim Fitment Range Rover Velar 2017 – 2022 Standard / S / SE / HSE Direct Fit Range Rover Velar 2017 – 2022 R-Dynamic (Dynamic Spec) Not Required Range Rover Velar 2023 Onwards (Facelift) All Trims Not Compatible Range Rover Evoque All Years All Trims Not Compatible Range Rover Sport L494 All Years All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: Basic Hand Tools Ensure the vehicle is parked on a level surface with the engine off and fully cooled before beginning work on the rear bumper area. Carefully clean the lower rear bumper area to remove any road grime, wax or debris that may affect panel alignment or adhesion. Test-fit the diffuser conversion panel against the lower bumper to confirm alignment and familiarise yourself with the mounting points before final installation. Locate and engage the supplied mounting clips or hardware into the corresponding fixing points on the existing bumper structure. Press the diffuser panel firmly and evenly into position, working from the centre outward to ensure a flush, gap-free finish along all edges. Verify that all clips are fully seated, check panel alignment from a distance, and confirm no flex or movement is present before signing off the install. ⚠ Please Note: If your Velar is fitted with a tow bar, parking sensors, or aftermarket exhaust exits in the lower bumper area, please contact our team before ordering to confirm fitment compatibility. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm). Upgrade Your Velar the Right Way Join over 12,300 Land Rover and Range Rover owners who trust Victorious Automotive for premium styling upgrades. Shipped worldwide via DHL, FedEx and UPS — and backed by our 30-day money-back guarantee. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations and trademarks are the property of their respective owners and are referenced solely for the purpose of product fitment identification.

```html Victorious · Mercedes GLS/GL X167 · Running Boards Electric Motor Automatic Running Boards for Mercedes-Benz GLS/GL X167 Premium motorised side steps with full-integration into your OEM door triggers—automatic deployment on unlock, seamless retraction on lock. X167 2020+ Aluminium Alloy Automatic Deploy 800kg Capacity No Drilling Overview The Mercedes-Benz GLS and GL-Class (X167) are commanding three-row luxury SUVs designed for families and explorers who demand comfort at every step. High ground clearance and a commanding driving position, however, can make cabin entry a challenge—particularly for shorter passengers or those with mobility considerations. These Electric Motor Automatic Running Boards transform entry and exit into a seamless, luxurious experience. Precision-engineered from marine-grade aluminium alloy and stainless steel, they activate automatically when you unlock your doors and retract silently when you lock up. The 800kg weight capacity means confident footing for all occupants, while the integrated side step bar design complements the GLS/GL's bold body lines. Installation utilises your vehicle's existing chassis mounting points—no drilling, no permanent modifications. Whether you're speccing a new GLS or upgrading a current model, these boards deliver the quality and reliability that Mercedes owners expect. What's Included 📦 Motorised Running Board Set L/R pair with integrated electric actuators 🔩 Stainless Steel Mounting Hardware Corrosion-resistant brackets and fasteners ⚡ Wiring Harness & Connectors Pre-assembled door trigger integration 📋 Installation Guide Step-by-step instructions with torque specs Product Highlights Aluminium alloy construction with ABS and stainless steel accents Automatic motor deployment on door unlock, retraction on lock 800kg static load capacity for all passenger weights ISO9001, TS16949, and CCC certified engineering Scratch-resistant powder coating and wear-tested surface Integrated side step bar—factory aesthetic integration Weight: 38–40kg per pair, balanced installation No drilling required; uses OEM chassis anchor points Sealed motor assembly—water and salt spray resistant Failsafe manual descent in case of power loss Compatibility Model Year Range Code Fitment Mercedes-Benz GLS 2020–2026 X167 Direct Fit Mercedes-Benz GL-Class 2020+ X167 Direct Fit Mercedes-Benz GLE 2020–2026 C167 Not Compatible Mercedes-Benz G-Class All W463 Not Compatible Installation Difficulty Level: Intermediate | Time: 2–3 Hours Professional installation is recommended if you're not comfortable working with vehicle electrical systems. Improper door trigger wiring can affect lock/unlock function. Park on level ground and engage parking brake. Disconnect negative battery terminal for safety. Locate OEM chassis mounting points beneath driver and passenger doors. Install stainless steel brackets using provided hardware; torque to 25 Nm. Slide motorised board assembly onto brackets and secure with locking fasteners. Route wiring harness along factory cable trays to driver-side door module. Splice door unlock trigger wire to running board harness (requires 12V switched signal). Reconnect battery and test automatic deployment/retraction cycle. Verify smooth operation at full extension and retraction limits. Final torque check on all fasteners. ⚠ Warning: If you are not confident splicing into door module wiring, have this completed by a qualified Mercedes technician. Incorrect wiring can disable central locking or trigger warning lights. Complete Your GLS/GL Upgrade Elevate cabin access and add a touch of automotive sophistication. These motorised running boards are engineered to the same standards as OEM Mercedes components—tested for reliability across European winters and summer heat. Ready to order? Shop Running Boards for X167 Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm 🚚 Worldwide DHL, FedEx, UPS ✅ 30-day money-back guarantee Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler-Benz, or any official franchised dealer. All product names and marks are the property of their respective owners. This product is designed and tested for the Mercedes-Benz GLS/GL X167 platform (2020+) and is not an OEM component. Installation at a qualified Mercedes service centre is recommended. Warranty does not cover improper installation or electrical modification beyond the scope of this guide. ```

Victorious · Mercedes GLS/GL · Running Boards Running Boards Side Steps for 2020 Mercedes-Benz GLS/GL X167 Premium aluminium side steps engineered for secure, confident entry—with professional looks and zero-drilling installation. X167 2020+ Aluminium Alloy Stainless Steel 600–800 kg Load No Drilling Overview The 2020 Mercedes-Benz GLS and GL (X167) is a flagship three-row SUV demanding premium accessories that match its engineering standard. These running boards are precision-engineered for seamless integration with your vehicle's existing architecture, providing safe, everyday access while enhancing your GLS/GL's visual presence. Built from aerospace-grade aluminium alloy with reinforced stainless steel components, these side steps combine lightweight strength with long-term durability. The thickened mounting bracket supports loads of 600–800 kg, meaning they'll handle passenger weight, luggage, or roof-rack preparation without flex or fatigue. Scratch-resistant surfaces and vibration-dampening technology ensure they remain pristine through years of daily use. Installation requires no drilling—the steps bolt directly to your chassis using existing factory attachment points. Stainless steel hardware and corrosion-resistant plating ensure performance in all climates, from coastal salt spray to winter salt roads. Backed by ISO 9001 and TS16949 certification, these are engineered components, not aftermarket compromises. What's Included 📦 Running Board Set Matched pair, precision-fitted for X167 ⚙️ Stainless Steel Brackets Thickened mounting hardware with anti-vibration 🔧 Installation Accessories Fasteners, clips, seals, and detailed user guide Product Highlights Lightweight aluminium alloy with reinforced ABS and stainless steel for durability High load capacity: 600–800 kg with thickened, vibration-damping brackets Corrosion-resistant finish withstands salt, heat, acid, and seasonal exposure Scratch-resistant surface keeps steps looking factory-fresh year-round Installation via existing chassis holes—no drilling, no bodywork modification Precision-moulded gaps and fitment eliminate rattles and misalignment ISO 9001 & TS16949 certified engineering and manufacturing Approximately 17–18 kg per set—adds minimal unsprung weight Enhanced approach angle access for children, elderly passengers, and cargo loading OEM-style appearance integrates seamlessly with X167 design language Compatibility Vehicle Generation Year Range Status Mercedes-Benz GLS X167 2020–Present Direct Fit Mercedes-Benz GL X167 2020–Present Direct Fit Mercedes-Benz GLS X166 2013–2020 Not Compatible Mercedes-Benz GL X164 / X166 Pre-2020 Not Compatible Installation DIY or Professional Setup Difficulty: Intermediate | Time: 45–90 minutes | Tools: Socket set, torque wrench, trim removal kit Remove lower trim panels on both sides to expose chassis attachment points Position running board brackets against existing factory mounting holes Insert and hand-tighten stainless steel bolts through bracket flanges Align running board with door sill and passenger entry zone; check for gaps Torque all fasteners to manufacturer spec (typically 25–35 Nm); avoid over-tightening Reinstall trim panels; test board stability by applying firm downward pressure Check alignment after 100 km of driving; re-torque if needed Note: If you lack socket tools or feel uncomfortable with fastener torque specs, professional installation is recommended. Improper tightening can cause vibration or damage to brackets. Many Mercedes specialists complete this in under an hour. Ready to Upgrade Your GLS/GL? Precision engineering meets everyday functionality. These running boards transform entry and exit while adding the polished aesthetics your Mercedes deserves. Order today and enjoy secure, confident access—no compromises. Shop Mercedes Accessories Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day guarantee – full refund, no questions ✓ Worldwide shipping – DHL, FedEx, UPS, TNT ✓ Expert support – +44 203 943 9919, Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or Jaguar Land Rover. Product names and vehicle designations are used solely for compatibility and identification purposes. All trademarks are the property of their respective owners.

Victorious · Mercedes GLS · Exterior Trim 2020 Mercedes GLS High Gloss Black Exhaust Trim Precision-engineered exhaust finisher set that transforms the rear end of your GLS with understated luxury and flawless fitment. 2020 Model Mercedes GLS Stainless Steel High Gloss Black Direct Fit Overview The Mercedes GLS demands components that honour its refined character. This exhaust trim set has been engineered to deliver a seamless visual enhancement to your 2020 model, integrating with the factory rear fascia without compromise. Constructed from premium stainless steel and finished in elegant high gloss black, these trims offer immediate aesthetic uplift. The two-piece configuration ensures straightforward installation, while the material resists oxidation and thermal stress—critical for components positioned this close to the exhaust outlet. Whether you're prioritizing a subtle performance aesthetic or simply want to refine the rear profile, this trim set delivers. It's a finishing touch that catches light without shouting. What's Included 🔧 2x Exhaust Trim Finishers High gloss black stainless steel 📋 Installation Guide Step-by-step fitment reference 🛡️ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights Premium stainless steel construction resists corrosion and heat stress High gloss black finish maintains appearance through thermal cycling Two-piece set for symmetrical rear fascia coverage Direct fit design—no drilling, cutting, or welding required Factory-spec alignment with OEM exhaust outlets Lightweight profile preserves suspension geometry Simple adhesive and mechanical fastening method Compatible with factory paint protection films Thermal-rated materials ensure longevity under exhaust heat Instant visual refinement with zero performance impact Compatibility Vehicle Model Model Years Status Mercedes-AMG GLS 2020 Direct Fit Mercedes GLS 580 2020 Direct Fit Mercedes GLS 450 2020 Direct Fit Mercedes GLS (2021+) 2021–Present Not Compatible Other Mercedes Models All Years Not Compatible Installation Difficulty Level: Beginner | Time Required: 30–45 minutes Prepare the vehicle: Park on a level surface and allow the exhaust system to cool completely. Do not attempt installation while the vehicle is warm. Clean the rear fascia: Use a microfiber cloth and mild detergent to remove any dirt, oil, or residue from the area where the trim will be mounted. Dry thoroughly: Air-dry or use a clean cloth to ensure the surface is completely free of moisture before proceeding. Position the first trim: Align the left exhaust trim finisher with the factory exhaust outlet. Ensure it sits flush against the rear bumper fascia. Secure the first piece: Apply the provided adhesive strip to the back of the trim and press firmly into place for 10–15 seconds. If mechanical fasteners are included, install them according to the fitment guide. Install the right trim: Repeat the process for the second trim finisher, maintaining symmetry with the first piece. Cure time: Allow the adhesive to set for 24 hours before driving. Avoid washing or exposing the vehicle to moisture during this period. Final inspection: Once cured, inspect the fitment visually and by hand. Both trim pieces should sit flush with no gaps or movement. ⚠️ Important: Do not use the vehicle immediately after installation. Adhesive requires full cure time. High-speed driving or thermal shock before cure can compromise adhesion. If fasteners are used, ensure they are tightened to the specified torque to avoid vibration or loosening. Ready to Refine Your GLS? Add understated elegance to your 2020 Mercedes GLS with this precision-engineered exhaust trim set. Simple fitment, lasting durability, and the confidence that comes from owning components designed by enthusiasts for discerning owners. Shop Now Use discount code 22GET20 for 20% off any 2 items at checkout. ✓ 4.9/5 stars from 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS ✓ Expert support: +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any subsidiary. All product names and references are used for identification and compatibility purposes only. This product is an aftermarket accessory and does not carry any factory warranty from the vehicle manufacturer.

Victorious · Mercedes · Exhaust Styling Quad Exhaust Muffler Trim for 2020 Mercedes GLS Premium stainless-steel quad muffler trim that elevates your GLS with authentic motorsport styling and flawless fitment. W167 / X167 2020+ Stainless Steel Silver Finish Direct Fit Overview Your 2020 Mercedes GLS commands attention on every road. This quad exhaust muffler trim sharpens its rear profile, adding purposeful definition that bridges the gap between elegance and aggression. Crafted in marine-grade stainless steel, it resists salt, moisture, and UV degradation with zero maintenance required. Unlike bolt-on replicas, this set integrates seamlessly with your GLS's existing architecture. The symmetrical quad design emphasizes width and stance, transforming the rear bumper area into a visual anchor. Installation is straightforward—no cutting, welding, or permanent modifications. Whether you're refining a stock GLS or adding the final accent to a bespoke build, this trim delivers premium presence without compromise. What's Included 🔧 Quad Exhaust Trim Set Left & right-hand pair, pre-aligned 📦 Hardware & Fixings Stainless fasteners included 📋 Installation Guide Step-by-step visual instructions ✓ Quality Guarantee 30-day no-questions return Product Highlights Marine-grade stainless steel resists salt, moisture, and corrosion in all climates Precision-engineered for direct fitment—no modifications required Symmetrical quad design emphasizes width and aggressive rear stance Silver anodised finish maintains colour and lustre for years Whisper-quiet integration—no vibration or rattle Lightweight construction adds minimal unsprung weight Professional motorsport aesthetic at an accessible price Perfect complement to factory AMG or custom body kits Non-permanent installation—fully reversible if needed Backed by Victorious 30-day money-back guarantee Compatibility Mercedes Model Chassis Code Years Status GLS W167 / X167 2020–2026 ✓ Direct Fit GLE 350 W167 2020–2026 ✓ Compatible GLE 450 W167 2020–2026 ✓ Compatible GLC X253 2019–2024 ✓ Compatible Earlier GLS models Pre-W167 –2019 ✗ Not Compatible Verify fitment: Confirm your vehicle's chassis code (W167, X167, X253) on your registration or via Mercedes-Benz online portal before purchase. Trim thickness may vary with optional bumper packages. Installation Notes Difficulty: Beginner–Intermediate | Time: 30–45 minutes Remove negative terminal from battery and wait 5 minutes for electrical discharge. Carefully remove rear bumper trim or access panel as outlined in your GLS service manual. Dry the muffler area and surrounding surface with a microfibre cloth. Light isopropyl wipe is permitted. Position left trim against driver-side exhaust outlet, align mounting brackets, and secure fasteners hand-tight first. Repeat step 4 for passenger-side (right) trim, ensuring symmetry and equal spacing from bumper edge. Torque all fasteners to 8–10 Nm using a calibrated torque wrench in a star pattern. Reinstall bumper trim and reconnect battery terminal. Start engine and visually confirm no gaps or movement. Allow adhesive-backed seals (if applied) to cure for 2 hours before heavy acceleration. Note: Professional installation by a Mercedes-Benz specialist is recommended for peace of mind. Our team can recommend certified installers in your area. Ready to Elevate Your GLS This quad exhaust trim is the signature finishing touch your Mercedes deserves. Engineered for durability, designed for impact, backed by our 30-day guarantee and world-class customer support. Shop This Trim Now Use code 22GET20 for 20% off when you buy any 2 items from Victorious. 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL/FedEx +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with Mercedes-Benz AG, Daimler, or any official Mercedes-Benz dealer. All product names and vehicle designations are used for identification purposes only. Your vehicle remains fully warrantied under Mercedes-Benz terms when fitted with third-party non-structural accessories.

```html Premium Automotive · Mercedes GLE · Exhaust Styling 2020 Mercedes GLE Quad Exhaust Muffler Trim Kit Polished stainless steel quad exhaust trim for a refined, commanding rear end appearance on your 2020 Mercedes GLE. 2020 Model Year Mercedes GLE Chrome Stainless Steel Quad Exhaust No Modifications Overview The 2020 Mercedes GLE commands attention on the road, and the right exhaust trim elevates its presence even further. This Quad Exhaust Muffler Trim Kit transforms your GLE's rear end with four gleaming stainless steel finishers that frame the exhaust outlets in contemporary elegance. Built from premium materials with a luxurious chrome finish, this kit installs without modification to your vehicle. The result is a polished, factory-finished look that enhances the GLE's muscular proportions and signals refined automotive taste. Perfect for owners who understand that details matter—especially at the back where every tailgater sees your commitment to excellence. What's Included ✦ Quad Exhaust Trim Pieces (x2) Premium stainless steel, chrome-finished 📋 Installation Guide Step-by-step instructions with diagrams Product Highlights Engineered for perfect 2020 Mercedes GLE fitment Premium stainless steel construction Luxurious mirror chrome finish Rust and corrosion resistant No vehicle modifications required Simple bolt-on installation Maintains factory aesthetic Paired left and right trim pieces UV-stable coating protects shine Enhanced rear-end visual presence Compatibility Vehicle Model Year Range Compatibility Mercedes GLE 2020 Direct Fit Mercedes GLE 2021–2026 Verify Fitment Mercedes GLE Coupé 2020 Not Compatible Mercedes GLB / GLC All Years Not Compatible Note: Always verify fitment with your specific model and year before purchase. Some variants may require additional hardware or minor adjustments. Installation Notes Difficulty Level: Beginner | Time Required: 30–45 Minutes Ensure vehicle is parked on level ground and engine is cool Locate the exhaust outlet finishers on both sides of the rear bumper Align quad trim pieces with existing mounting points Secure using provided stainless steel fasteners—do not overtighten Verify symmetrical alignment and firm contact Clean chrome with soft microfiber cloth; avoid abrasive cleaners Allow 24 hours before washing the vehicle Important: If your 2020 GLE has aftermarket exhaust systems or non-standard rear bumper modifications, compatibility may be affected. Check photo fitment guides and contact our team before ordering. Elevate Your GLE's Rear End Premium quad exhaust trim for discerning Mercedes GLE owners. Four gleaming stainless steel finishers. No modifications. Pure, refined presence. Add to Cart Use code 22GET20 for 20% off when you order 2 items 4.9/5 · 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide Shipping via DHL & FedEx +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes manufacturer. All product names and references are for compatibility and identification purposes only. This product is an aftermarket accessory and is not an official Mercedes part. ```

Victorious Automotive · Range Rover Evoque L551 · Running Boards Side Running Boards for Range Rover Evoque L551 (2020–2022) Precision-moulded aluminium alloy side steps engineered for a direct-fit, no-drill installation on the second-generation Range Rover Evoque — combining structural strength with a clean, factory-integrated look. L551 Evoque 2020 · 2021 · 2022 Aluminium Alloy ABS Body Stainless Steel Brackets No Drilling Required ISO9001 · TS16949 600–800kg Load Rated Direct Fit Overview The second-generation Range Rover Evoque (L551) sits at an elevated ride height that, while commanding on the road, can make entry and exit feel less graceful — particularly for shorter drivers, passengers with mobility considerations, or anyone loading luggage and equipment. These side running boards address that directly, providing a wide, secure step platform that integrates seamlessly with the Evoque's refined body lines. Constructed from ISO9001-certified high-grade aluminium alloy with an ABS step surface and stainless steel mounting brackets, these running boards are built to last in real-world conditions. The stainless steel hardware offers exceptional resistance to heat, acid, salt, and corrosion — essential for a vehicle that spends time on British roads, coastal environments, or anywhere road salt is a concern. The load-bearing structure is rated to withstand 600–800kg of static force, meaning the brackets will outlast the vehicle if properly maintained. Manufactured through a closed-mould production process, every dimension is engineered specifically for the L551 Evoque platform. The fit is precise — no adaptation, no shimming, no compromise. Whether your Evoque is a manual-door or automatic-door variant, the running board sizing is identical, and installation uses your vehicle's existing chassis holes without any drilling whatsoever. What's Included 🔲 Side Running Boards (Pair) Left & right aluminium alloy step boards with ABS anti-slip surface 🔩 Stainless Steel Mounting Brackets Thickened stainless steel stents for maximum structural rigidity 🛠️ Installation Hardware Pack All bolts, washers, and fasteners required for a complete fit 📋 Installation Guide Step-by-step instructions for straightforward self-installation Product Highlights Aluminium alloy body — lightweight yet exceptionally rigid underfoot ABS step surface resists scratches, scuffs, and surface wear over time Stainless steel brackets rated to 600–800kg static load capacity Anti-corrosion stainless hardware — resistant to heat, acid, salt, and moisture Closed-mould production ensures 100% dimensional accuracy for the L551 platform No drilling required — mounts directly to existing factory chassis holes Suitable for both manual and automatic door variants of the Evoque ISO9001 and TS16949 dual-certified manufacturing process Vibration-dampening construction reduces road noise and rattle Factory-integrated aesthetic that complements the Evoque's design language Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 – 2022 Direct Fit Range Rover Evoque L551 2023+ Verify Before Purchase Range Rover Evoque (First Gen) L538 2011 – 2018 Not Compatible Range Rover Velar L560 2017+ Not Compatible Discovery Sport L550 2015+ Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 45–75 minutes  |  👤 1–2 people recommended Park your Evoque on a flat, level surface and ensure the vehicle is secure before working underneath. Locate the pre-existing mounting holes along the underside of the chassis — no drilling is required at any stage. Attach the stainless steel mounting brackets to the chassis holes using the supplied hardware, ensuring each bracket is seated flush and square. With a second person to assist, align each running board onto the mounted brackets from front to rear. Insert and hand-tighten all fasteners before torquing down to a firm, even finish — do not over-tighten. Inspect all contact points, check for lateral movement, and confirm both boards are level and secure before driving. ⚠ Important: Always verify that the chassis mounting points are clean and free from corrosion before installation. If you are unsure at any stage, we recommend consulting a qualified installer. Do not exceed the rated load capacity of 600–800kg on either step. Complete Your Evoque Browse the full range of premium accessories for the Range Rover Evoque L551 — from exterior styling to interior protection — all designed with the same level of precision and finish quality. Shop All Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Mercedes · Exterior Styling 2020 Mercedes GLC Quad Exhaust Muffler Trim – Premium Chrome Tailpipe Covers Elevate your GLC's rear end with precision-engineered quad exhaust covers that deliver a factory-finished, premium look. 2020 GLC Stainless Steel Chrome Finish Custom Fit Tool-Free Install Overview The 2020 Mercedes-Benz GLC deserves an exhaust presentation that matches its sophisticated engineering. This quad muffler trim set brings that premium dealership-quality aesthetic to your rear bumper, transforming the tailpipe area with a polished, intentional design that complements the GLC's modern lines. Built from high-grade stainless steel with a flawless chrome finish, these custom-fit covers integrate seamlessly with your OEM exhaust system. There's no modification required—they sit flush with your existing tailpipes and are secured with a straightforward installation process that takes minutes, not hours. Whether you're seeking a subtle refinement or a visual upgrade that catches the eye, these quad exhaust covers deliver presence without compromise. They're engineered to resist corrosion, thermal stress, and road salt—ensuring your GLC looks sharp for years to come. What's Included 🔲 2x Muffler Trim Covers Precision-engineered chrome covers 📋 Installation Guide Clear, step-by-step visual instructions Product Highlights Custom-fit design engineered specifically for 2020 Mercedes GLC models Premium stainless steel construction resists rust and corrosion Mirror-polished chrome finish reflects light beautifully Seamless integration with OEM exhaust system—no modifications needed Tool-free installation—secure fit without drilling or welding Precision tolerance ensures factory-aligned appearance Thermal-resistant coating handles high exhaust temperatures Durable enough for daily driving and harsh climates Enhances sportier visual profile of your GLC Backed by our 30-day money-back guarantee Compatibility Model Year Variant Compatibility 2020 Mercedes-Benz GLC All GLC Trims (200, 300, 300 Coupe, 43 AMG) Direct Fit 2019 and Earlier Previous Generation GLC Not Compatible 2021 and Later Updated GLC (W206) Not Compatible Verify your model year before purchase. These covers are engineered exclusively for 2020 GLC models. Please confirm your vehicle year and trim level for guaranteed compatibility. Installation Difficulty: Easy | Time: 15–20 Minutes Ensure your vehicle is parked on a level surface with the engine cool. Position the first trim cover over the driver-side tailpipe, aligning the edges carefully. Apply gentle, steady pressure until the cover seats fully—you'll feel it click into place. Repeat for the passenger-side cover, ensuring both sit symmetrically. Check alignment from behind the vehicle and make minor adjustments if needed. Allow 1 hour before driving for the adhesive seal to cure completely. Pro Tip: Clean the tailpipe exterior with a dry cloth before installation for optimal grip and finish. Do not force the covers—they should slide on smoothly. If resistance occurs, check alignment and try again. Finish Your GLC's Look Premium exhaust styling should be effortless. With our quad muffler trim set, you get the polished appearance of a factory upgrade without the dealership markup. Fast shipping, expert support, and a full money-back guarantee—that's the Victorious promise. Add to Cart Use code 22GET20 for 20% off when you purchase any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Mercedes-Benz, Daimler AG, or any official manufacturer. All product names, logos, and brands remain the property of their respective owners. This product is designed for fitment and aesthetic enhancement only. Always verify compatibility with your specific vehicle before purchase. Installation should be performed by a qualified professional if you are uncertain. We are not liable for improper installation or vehicle damage resulting from misuse.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fibre Side Vents — Range Rover Sport L494 (2014–2017) A sharp, purposeful exterior upgrade — carbon fibre look side vents purpose-built for the pre-facelift Range Rover Sport L494, fitting cleanly in place of the factory originals with zero modification required. L494 2014–2017 Carbon Fibre Look Side Vents Exterior Styling Direct Fit DIY Install Pre-Facelift Overview The Range Rover Sport L494, produced from 2013 through to the 2017 model year, is one of the most visually commanding SUVs to have emerged from Solihull. Its wide-set stance, raked roofline and sculpted flanks reward owners who pay close attention to the details — and few areas offer a more impactful upgrade opportunity than the side vents sitting just behind the front wheels. These carbon fibre look side vents are designed as a direct, like-for-like replacement for the factory items on pre-facelift L494 Sport models. Finished in a high-quality carbon look weave, they replace the standard units instantly — adding a performance aesthetic that references the Sport's motorsport-inspired character without the weight or cost of full dry carbon. The result is a subtle but unmistakable visual shift: darker, more defined flanks that complement the Sport's already aggressive profile. Whether paired with gloss black accessories or left to contrast against the factory body colour, these vents read as a considered, enthusiast-led choice rather than an afterthought. What's Included 🪶 Carbon Look Side Vents Pair (left & right), pre-facelift L494 specific fitment 🔩 Fitting Hardware All necessary clips and fixings for a secure OEM-style fit 📋 Fitment Guide Step-by-step installation reference included 📦 Protective Packaging Foam-lined box to ensure safe delivery in transit Product Highlights Purpose-built fitment for L494 Range Rover Sport 2014–2017 only Carbon fibre look finish — high-gloss weave aesthetic Direct OEM replacement — no cutting, drilling or modification Sold as a pair — both driver and passenger side included Lightweight construction — negligible weight addition Compatible with all trim levels across the 2014–2017 model range DIY-friendly installation — achievable in under 30 minutes Complements gloss black, carbon, and dark chrome exterior packs Precision-moulded for flush, factory-finish panel alignment Durable finish resistant to UV fading and weathering Compatibility Model Code Year Range Fit Range Rover Sport L494 2013–2017 (Pre-Facelift) Direct Fit Range Rover Sport L494 2018–2022 (Facelift) Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible ⚠ Important Fitment Note: These vents are designed exclusively for the pre-facelift Range Rover Sport L494 (2013–2017). The 2018 facelift and all subsequent models feature a revised front bumper and vent surround design — these parts will not fit and should not be ordered for those vehicles. If you are unsure of your exact model year or build, please contact our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: Trim removal tool, soft cloth Park on a level surface and ensure the vehicle is switched off. Allow the engine bay to cool if recently driven. Using a plastic trim removal tool, carefully unclip the factory side vent from the bumper surround. Work around the perimeter to release all retaining clips without marking the bodywork. With the original vent removed, clean the mounting recess with a soft cloth to remove any debris or residue before fitting the new unit. Align the carbon look vent into position, ensuring all clip points are correctly located before applying gentle, even pressure to seat each clip fully. Repeat on the opposite side. Run a finger around the perimeter of each vent to confirm a flush, even fit with no gaps or proud edges. Step back and inspect both sides for alignment. Clean the finish with a detailing cloth to remove any fingerprints before driving. ⚠ Tip: A plastic pry tool rather than a metal screwdriver is strongly recommended to avoid scratching the bumper surround during clip removal. Take your time on the first side — the second will feel significantly easier once you understand the clip pattern. Upgrade Your Sport the Right Way These carbon fibre look side vents are one of the quickest and most impactful exterior changes you can make to your pre-facelift Range Rover Sport L494. Explore the full range of Sport exterior accessories at Victorious — built specifically for owners who know the difference. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 Expert advice Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover Velar · Exterior Styling Silver & Black Hood Vent Slats for Range Rover Velar 2017–2019 Transform your Velar's bonnet with precision-finished two-tone vent slat trims that deliver the Dynamic Edition look — no drilling, no fuss, no compromise. Range Rover Velar 2017–2019 Silver & Black Bonnet Vent Trims Peel & Stick Exterior Styling High-Grade ABS No Drilling Required Overview The Range Rover Velar arrived with one of the most architecturally considered silhouettes in the modern SUV era — flush surfaces, flush door handles, and a bonnet line that draws the eye from front to rear. The hood vent apertures are a defining detail of that design, and yet in standard trim, they remain understated. These Silver and Black Hood Vent Slat Trims are designed specifically for Velar owners who want to unlock the full visual intent of that feature. Finished in a polished silver and gloss black two-tone combination, these vent slat inserts slot cleanly into the existing bonnet vent cutouts and replicate the appearance of the Velar's premium Dynamic specification. The contrast between the silver slats and black surround picks out the geometry of the vent with precision, adding visual depth and a purposeful, performance-orientated character without altering the vehicle's original lines. Manufactured from high-grade ABS polymer with a mirror-quality surface finish, these trims are built to resist UV fading, temperature cycling, and the general rigours of daily driving. Installation requires no tools, no adhesive mixing, and no professional fitting — just a clean surface, a few minutes, and the confidence that the result will look factory-correct from day one. What's Included 🔲 Hood Vent Slat Trims (x2) Left and right silver & black inserts for both bonnet vents 📎 Pre-Applied 3M Adhesive Tape High-bond automotive-grade backing, factory-applied to each trim 🧹 Surface Prep Wipe Alcohol cleaning wipe to ensure a clean bond prior to fitting 📄 Fitting Instructions Step-by-step guide included in the box Product Highlights Designed specifically for the Range Rover Velar 2017–2019 bonnet vent apertures Two-tone silver and gloss black finish for a Dynamic Edition aesthetic High-grade ABS construction — resistant to UV, heat, and road vibration Pre-applied 3M automotive adhesive — no separate bonding agents required Tool-free installation completable in under 15 minutes Precision-cut for flush, factory-correct fitment — no gaps or proud edges Does not interfere with bonnet vent function or airflow Non-permanent — fully removable without damage to paintwork Available in three colourways: Silver/Black, Rose Gold, and Full Black Supplied as a complete pair — fits both left and right vents simultaneously Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar (L560) 2017 – 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020 – 2022 All trims Verify Before Purchase Range Rover Evoque (L551) 2019 – 2024 All trims Not Compatible Range Rover Sport (L494) 2013 – 2022 All trims Not Compatible Range Rover Vogue (L405) 2013 – 2021 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and allow the bonnet to cool fully to ambient temperature before beginning installation. Use the included alcohol prep wipe to thoroughly clean the surface of each bonnet vent aperture. Remove all wax, polish residue, and road film. Allow to dry completely — approximately 60 seconds. Test-fit each vent slat trim against its corresponding aperture without removing the adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first trim. Position carefully within the vent aperture, starting from the centre and working outward. Apply firm, even pressure across the full length of the trim for a minimum of 30 seconds to activate the adhesive bond. Repeat for the second vent slat trim on the opposite side. Allow 24 hours before washing the vehicle or exposing the bonnet to heavy rain, to allow the adhesive to reach full cure strength. ⚠ Note: Do not attempt installation in direct sunlight or when ambient temperature is below 10°C, as this will reduce adhesive performance. For best results, install indoors or in a shaded area with a surface temperature between 15°C and 35°C. Complete the Look on Your Velar Explore the full Victorious range of exterior styling accessories for the Range Rover Velar — from mirror caps and grille surrounds to side vents and door trims. Everything you need to finish the build, in one place. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. All rights remain with their respective owners.

Victorious Automotive · Velar / Evoque / Discovery Sport · Exterior Styling Carbon Fibre Mirror Covers – Range Rover Velar, Evoque & Discovery Sport Achieve the premium SVR carbon look on your Velar, Evoque, or Discovery Sport with precision-cut, high-quality carbon TPU mirror covers — no drilling, no modification required. Carbon TPU SVR Look Velar 2017–2020 Evoque 2016–2020 Discovery Sport 2015–2020 Clip-On Fit No Drilling Two-Piece Set Overview The Range Rover Velar, Evoque, and Discovery Sport are vehicles that reward attention to detail. From their sculpted flanks to their carefully considered proportions, they're designed to be noticed — and the exterior mirror housings are among the most visible styling elements on the vehicle. Yet it's the top-specification SVR and Black Pack models that get the carbon fibre treatment from the factory, leaving many owners of standard-specification cars searching for an accessible way to close that gap. These carbon fibre-effect mirror covers are designed to do exactly that. Precision laser-cut from high-quality carbon TPU, they replicate the genuine carbon weave aesthetic found on Land Rover's highest-trim derivatives. The material delivers excellent resistance to UV fading and weathering, ensuring the finish remains sharp and consistent long after installation. The carbon weave pattern is bold without being overdone — exactly the kind of purposeful detail that complements the character of these vehicles. Installation is intentionally simple. Each cover clips cleanly over your existing mirror housing using the included adhesive tape, with no tools, no drilling, and no permanent modification to the vehicle. The laser-cut precision ensures a flush, factory-quality fit against every contour of the mirror. Whether you're building out a full carbon exterior package or simply looking for one considered upgrade, these covers offer an exceptional result for the effort involved. What's Included 🪞 Left Mirror Cover Carbon TPU, precision laser-cut 🪞 Right Mirror Cover Carbon TPU, precision laser-cut 🔧 Adhesive Tape Pre-cut strips for secure fitment 📄 Fitting Guide Step-by-step installation instructions Product Highlights Precision laser-cut carbon TPU for exact panel alignment Replicates the factory SVR carbon mirror aesthetic Clip-and-adhesive installation — no drilling required Adhesive tape included for a secure, long-lasting bond UV and weather-resistant material for outdoor durability Sold as a complete two-piece set (left and right) Compatible with three popular Land Rover model lines Seamless integration with existing carbon interior packages No permanent modification to original mirror housings Fully reversible — originals remain undamaged beneath Compatibility Vehicle Year Range Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Evoque (L538) 2016 – 2020 Direct Fit Land Rover Discovery Sport 2015 – 2020 Direct Fit Range Rover Evoque (L551) 2019 – present Verify Before Order Range Rover Vogue / Sport L494/L405 All years Not Compatible Land Rover Defender L663 All years Not Compatible Unsure about your specific build year or mirror type? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes ⏱ Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean your existing mirror housing with an isopropyl alcohol wipe and allow to dry completely. Remove any wax, polish, or contaminants from the surface. Test-fit each carbon cover over the mirror housing before applying adhesive, confirming alignment and coverage across all edges. Apply the provided adhesive tape strips to the inner face of each cover, following the contours of the housing. Starting from one edge, press the cover firmly onto the mirror housing, working gradually toward the opposite side to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 1 hour before exposing to rain or a car wash. ⚠ Note: Surface temperature affects adhesive performance. For best results, install in dry conditions above 10°C (50°F). Avoid installation in direct sunlight on very hot days, as this can cause premature adhesive curing before the cover is fully positioned. Complete the Carbon Look These mirror covers pair perfectly with our full range of carbon interior and exterior styling parts for the Velar, Evoque, and Discovery Sport. Browse the full collection for your vehicle or get in touch — our team knows these cars inside out. Shop Velar Accessories Shop Evoque Accessories Shop Discovery Sport Buying two or more items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only.

Victorious Automotive · Range Rover Sport L494 · Mirror Accessories Range Rover Sport 2013–2020 Chrome Mirror Trim Surround A precision-fitted chrome mirror surround that elevates the exterior detailing of your L494 Range Rover Sport with a polished, factory-adjacent finish. Range Rover Sport L494 2013–2020 High-Quality TPU Chrome Finish Peel & Stick No Drilling Required Exterior Trim Mirror Surround Overview The Range Rover Sport L494 — produced from 2013 through 2020 — is a vehicle that commands presence by design. Its sculpted body lines, assertive stance, and premium exterior detailing set it apart from the moment it arrives. For owners who take that exterior seriously, every surface matters — including the door mirrors, which sit prominently at eye level and contribute significantly to the vehicle's overall visual character. This Chrome Mirror Trim Surround is engineered specifically for the L494 Range Rover Sport. Manufactured from high-quality TPU with a lustrous chrome finish, it wraps cleanly around the mirror housing to introduce a refined, upscale accent that complements both standard and upgraded exterior specifications. The result is a subtle but unmistakable transformation — the kind that catches the eye without shouting for attention. Installation requires no specialist tools, no drilling, and no professional fitting time. The adhesive-backed design means this is a genuine weekend upgrade — clean the surface, align carefully, press firmly, and the surround bonds flush and secure. It's the detail-focused upgrade that Range Rover Sport owners appreciate precisely because it looks like it should have come that way from the factory. What's Included 🪞 Chrome Mirror Surround One piece, pre-shaped for L494 mirror housing 🔧 Pre-Applied Adhesive 3M-grade adhesive backing included 📋 Installation Guide Step-by-step fitting instructions 🧹 Cleaning Prep Wipe Surface prep cloth for optimal adhesion Product Highlights Precision-moulded to fit the L494 Range Rover Sport mirror housing profile exactly High-gloss chrome finish delivers a premium, factory-quality aesthetic Constructed from durable TPU — flexible, impact-resistant, and long-lasting Peel-and-stick installation requires no tools, drilling, or professional fitting 3M-grade adhesive backing ensures a firm, weather-resistant bond UV-stable finish resists fading, oxidation, and discolouration over time Enhances the exterior detailing of both standard and upgraded Sport variants Low-profile design sits flush with the mirror housing — no gaps or proud edges Removable without damage to paintwork when surface prep guidelines are followed Compatible with all L494 trim levels including SE, HSE, HSE Dynamic, and SVR-adjacent body styles Compatibility Vehicle Code Years Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean the mirror housing surface using the included prep wipe. Remove all traces of wax, dirt, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit the chrome mirror surround against the housing to confirm alignment and positioning. Take note of the correct orientation before applying adhesive. Carefully peel back the adhesive liner from the surround, exposing the adhesive surface. Avoid touching the adhesive with bare fingers. Starting from one edge, align the surround precisely with the mirror housing profile and press firmly into position. Work progressively across the piece to eliminate air pockets. Apply firm, sustained pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Pay particular attention to corners and edges. Allow a minimum of 2 hours before exposing to water or moisture. Full adhesive cure is achieved after 24 hours. ⚠ Important: Installation in temperatures below 10°C (50°F) may reduce adhesive performance. For best results, install indoors or in a garage environment. Always verify vehicle compatibility before fitting. Upgrade Your Sport's Detail Shop the full Range Rover Sport L494 accessories collection at Victorious Automotive — trusted by over 12,300 verified customers worldwide. Buy any two items and save 20% with the code below. Shop Range Rover Sport L494 → Use code: 22GET20 — 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Reviews 📦 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and designations referenced are used for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Interior Trim Range Rover Vogue L405 Interior Door Trim Strips (2013–2020) Precision-fit metallic TPU door trim strips that bring a refined, factory-finish aesthetic to every door panel of your L405 Vogue. Range Rover Vogue L405 2013–2020 High-Grade TPU Metallic Finish Peel & Stick Set of 4 Interior Upgrade No Drilling Required Overview The Range Rover Vogue L405 is a vehicle that sets the benchmark for luxury SUV interiors — and every detail matters. From the stitched leather door cards to the brushed metal accents, owners of the L405 understand that the cabin is as much a statement as the exterior. Over time, however, door trim edges can show signs of wear, scratches, or simply lack the visual definition that distinguishes a truly refined interior. These Interior Door Trim Strips are engineered specifically for the L405 Vogue platform, profiling the exact contours and dimensions of the 2013–2020 model's door cards. Crafted from high-grade TPU with a premium metallic finish, each strip mirrors the factory aesthetic while adding a subtle, elegant accent line across all four doors. The result is an interior that looks cohesive, considered, and unmistakably premium. Installation requires no specialist tools, no drilling, and no professional fitting — the pre-applied adhesive backing bonds cleanly to clean, dry door panels in minutes. Whether you're refreshing a well-loved L405 or adding a finishing touch to a recent purchase, these strips deliver an upgrade that punches well above their price point. What's Included 🚪 Front Left Door Strip Pre-cut for L405 driver door panel 🚪 Front Right Door Strip Pre-cut for L405 passenger door panel 🚪 Rear Left Door Strip Matched profile for rear door card 🚪 Rear Right Door Strip Matched profile for rear door card 🧴 Cleaning Wipe Surface prep wipe for optimal adhesion 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-cut specifically for the Range Rover Vogue L405 door card profile High-grade TPU construction — flexible, impact-resistant, and long-lasting Premium metallic finish complements factory chrome and brushed aluminium trim Peel-and-stick application — no tools, no drilling, no professional fitting needed Full set of four strips for a consistent, all-door cabin transformation Resistant to UV fading, heat, and humidity inside the cabin environment Adhesive backing rated for long-term bond on automotive-grade interior surfaces Protects door card edges from everyday scuffs, scratches, and contact wear Compatible with all L405 trim levels including SE, HSE, Autobiography, and SVAutobiography Reversible upgrade — strips can be removed cleanly without damaging door cards Compatibility Vehicle Model Code Years Trim Level Fitment Range Rover Vogue L405 2013–2020 SE Direct Fit Range Rover Vogue L405 2013–2020 HSE Direct Fit Range Rover Vogue L405 2013–2020 Autobiography Direct Fit Range Rover Vogue L405 2013–2020 SVAutobiography Direct Fit Range Rover Vogue L460 2022–2026 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Range Rover Velar L560 2018–2022 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔧 Tools Required: None Open all four doors and allow the interior to reach ambient room temperature — cold surfaces can reduce initial adhesion. Using the included cleaning wipe (or a 70% isopropyl alcohol wipe), thoroughly clean each door card surface where the strip will be applied. Remove any dust, grease, or residue and allow to dry fully. Dry-fit each strip against the door panel before committing — confirm alignment along the trim edge and note the correct positioning for each door. Peel back approximately 2–3cm of the protective backing from one end of the strip. Begin pressing firmly from one end, slowly peeling and pressing as you work along the full length of the door card. Once positioned, run your thumb or a clean cloth firmly along the entire strip to activate the adhesive bond across its full length. Repeat for all four doors. Avoid washing the interior surfaces or applying any conditioners near the strips for 24 hours to allow the adhesive to fully cure. ⚠ Please Note: Do not apply to surfaces that are damp, freshly conditioned with silicone-based products, or heavily textured. For best long-term results, avoid direct contact with steam cleaning equipment near the strip edges after installation. Complete Your L405 Vogue Interior Browse the full range of interior and exterior accessories designed specifically for the Range Rover Vogue L405 — every product precision-matched to your vehicle. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of vehicle compatibility identification.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Fog Light Covers – Range Rover Sport L494 (2014–2017) A precision-fit exterior upgrade that delivers the blacked-out, SVR-inspired front end aesthetic your Sport deserves — no cutting, no drilling, no compromise. Range Rover Sport L494 2014–2017 ABS Construction High Gloss Black Direct Fit Exterior Styling Fog Light Covers No Drilling Required Overview The Range Rover Sport L494 is one of Land Rover's most celebrated performance SUVs — a machine that balances dynamic road presence with genuine off-road capability. From the 2014 facelift cycle through to the 2017 model year, the Sport's front bumper design presented a clean canvas for owners who wanted to push the exterior aesthetic further, without committing to a full bodykit or factory SVR conversion. These High Gloss Black Fog Light Covers are engineered to slot directly into the existing fog light apertures of the 2014–2017 Range Rover Sport, replacing the standard silver or body-coloured surrounds with a sharp, gloss black finish that references the visual language of the SVR and Autobiography Black Edition models. The result is a more aggressive, unified front end — the kind of subtle change that makes the Sport look like it left the factory that way. Manufactured from high-grade ABS thermoplastic and finished to an automotive-grade high gloss, these covers are built to resist UV fade, surface cracking, and everyday road grime. Whether you're upgrading a standard Sport SE or refining an already-modified vehicle, this is one of the most cost-effective exterior transformations available for the L494 platform. What's Included 🔲 Fog Light Cover — Driver Side High gloss black ABS, left-hand fitment 🔲 Fog Light Cover — Passenger Side High gloss black ABS, right-hand fitment 🔩 Retention Clips Factory-style push-fit clips included 📄 Fitting Guide Step-by-step installation reference Product Highlights Precision-moulded for an exact factory-fit finish on L494 Sport bumpers High gloss black lacquer finish — consistent sheen across all light conditions Premium ABS thermoplastic resists impact, UV degradation, and road debris SVR-inspired aesthetic at a fraction of the factory upgrade cost No drilling, cutting, or permanent modification required Retains full access to fog light units — covers do not obstruct function Compatible with both LHD and RHD vehicle configurations Supplied as a matching pair for a symmetrical, balanced appearance 100% brand new — not refurbished or remanufactured components Complements gloss black grille surrounds, mirror caps, and roof rails Compatibility Model Code Year Range Trim Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport SVR L494 2014–2017 SVR Verify Bumper Range Rover Sport L494 2018–2022 All Trims (Facelift) Not Compatible Range Rover Sport L320 2005–2013 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L405 2013–2020 All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 20–35 Minutes  ·  🛠 Tools Required: Trim removal tool, microfibre cloth Ensure the vehicle is parked on a level surface with the engine off and the front bumper area cool to the touch. Gather a plastic trim removal tool and a clean microfibre cloth before beginning. Locate the existing fog light surrounds on the lower bumper. Using your trim removal tool, gently release the retention clips by working around the perimeter of the original cover — avoid using metal tools to prevent scuffing the bumper surface. Once the original covers are released, carefully set them aside. Wipe down the recess area with your microfibre cloth to remove any dust, moisture, or residue that could affect clip adhesion. Align the new high gloss black cover into the fog light aperture, ensuring the clip tabs line up correctly with the corresponding receiver points on the bumper. Press firmly and evenly around the edge until all clips engage with an audible click. Repeat the process for the opposite side. Once both covers are fitted, step back and inspect the finish from a distance to confirm even alignment and consistent panel gaps across both sides. Wipe down the finished covers with a clean microfibre cloth to remove any fingerprints or installation marks. Your upgrade is complete. ⚠ Note: The SVR variant of the L494 Range Rover Sport uses a different front bumper design with altered fog light aperture dimensions. If your vehicle is an SVR model, please contact our team on +44 203 943 9919 before ordering to confirm fitment compatibility. Upgrade Your Range Rover Sport Today Join over 12,300 verified Range Rover and Land Rover owners who trust Victorious Automotive for their exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL · FedEx · UPS · TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Installation is at the owner's discretion — if in doubt, consult a qualified automotive technician.

Victorious Automotive · Range Rover Sport L494 · Exterior Trim High Gloss Black Rear Tailgate Trim — Range Rover Sport L494 (2014–2020) A precision-formed ABS tailgate trim finished in high gloss black — engineered to update the rear end of your L494 Sport with a factory-fresh, contemporary aesthetic and zero modification required. Range Rover Sport L494 2014–2020 High Gloss Black ABS Material Rear Tailgate Direct Fit No Drilling Exterior Styling Overview The Range Rover Sport L494 is one of Land Rover's most visually cohesive performance SUVs — a vehicle where every exterior detail matters. Owners who invest in this level of machine typically want the trim, finish, and detailing to match that ambition. Whether you're refreshing a faded OEM piece or upgrading to a more assertive black finish, the rear tailgate trim is one of the most visible exterior elements on the Sport's rear fascia. This High Gloss Black Rear Tailgate Trim is precision-moulded from high-grade ABS to mirror the original factory profile exactly. The deep gloss lacquer finish is consistent across all surfaces, lending the rear of your L494 Sport a sharper, more deliberate aesthetic — complementing dark chrome, gloss black grilles, or black pack detailing that many Sport owners have already fitted. Designed as a direct replacement for the factory-fitted piece, this trim requires no drilling, no cutting, and no professional fitment. It locates directly onto the existing mounting points, making it one of the most accessible exterior upgrades available for the 2014–2020 Sport — delivering a visually meaningful result in under an hour. What's Included 🖤 Rear Tailgate Trim × 1 High gloss black ABS — pre-finished, ready to fit 📦 Protective Packaging Secured to prevent surface damage in transit Product Highlights Precision-moulded ABS construction for exact OEM fitment on L494 Sport models Deep, consistent high gloss black lacquer finish across all visible surfaces Direct clip-and-mount installation — no drilling, cutting, or modifications required Compatible with all trim levels of the 2014–2020 Range Rover Sport L494 Resistant to UV fading, temperature cycling, and car-wash-safe when properly fitted Visually complements gloss black packs, dark chrome detailing, and SVR-style upgrades Lightweight ABS construction adds no meaningful weight to the tailgate assembly Manufactured from new material — not remanufactured or reconditioned stock Ideal for replacing cracked, faded, or scratched factory tailgate trim pieces Ships worldwide via DHL, FedEx, UPS, or TNT — tracked and insured Compatibility Vehicle Code Years Trim Level Fit Range Rover Sport L494 2014–2020 SE / HSE / HSE Dynamic Direct Fit Range Rover Sport L494 2014–2020 Autobiography Direct Fit Range Rover Sport L494 2014–2020 SVR Direct Fit Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Vogue L405 2013–2021 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Defender L663 2020–2026 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools Required: None Open the tailgate fully and ensure the rear exterior surface is clean and dry before beginning fitment. Carefully remove the existing factory tailgate trim by releasing the OEM retaining clips — work from one end to the other to avoid stress cracking the original piece. Compare the new trim against the removed piece to confirm the profile and clip positions align correctly before fitting. Starting from one side, press the new trim firmly into the mounting points along the tailgate, working progressively across until all clips are fully seated. Run your hand along the full length of the trim to confirm an even, flush fit with no lifting edges or misaligned sections. Step back and inspect under natural light to confirm alignment and that the gloss finish sits flush with the surrounding bodywork. ⚠ Important: Always confirm the year and trim level of your specific Range Rover Sport against the compatibility table above before ordering. If you are unsure of your vehicle's specification, please contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Finish the Details. Own the Rear. The rear of your Range Rover Sport L494 deserves the same attention as the rest of the vehicle. This gloss black tailgate trim is one of the cleanest, most cost-effective exterior upgrades available — and it takes less than an hour to fit. Shop Range Rover Sport L494 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling High Gloss Black Front Grille Replacement for Range Rover Sport L494 (2014–2017) A bold, precision-formed ABS grille in high gloss black — designed to replace your factory unit and immediately sharpen the front-end presence of your Range Rover Sport. Range Rover Sport L494 2014–2017 High Gloss Black ABS Construction Direct Replacement No Drilling Required OEM-Style Fit Front Grille Overview The Range Rover Sport L494 (2014–2017) is a vehicle that strikes a careful balance between restrained British elegance and commanding road presence. The front grille is one of the most defining visual elements on the Sport — it frames the bonnet line, anchors the headlights, and sets the tone for the entire aesthetic. If your factory grille has become tired, damaged, or simply no longer reflects how you want your Sport to look, replacing it is one of the most impactful single modifications you can make. This High Gloss Black Front Grille has been engineered specifically for the Range Rover Sport L494 facelift and pre-facelift models produced between 2014 and 2017. Constructed from high-quality ABS thermoplastic, it replicates the geometry and mounting points of the original unit to the millimetre — allowing for a clean, rattle-free fitment without any modification to your vehicle's bodywork or wiring. The high gloss black finish adds a darkened, contemporary edge that complements the Sport's inherently athletic character. Whether you're refreshing a worn-out original or simply pursuing a blacked-out front-end aesthetic, this grille delivers a meaningful visual upgrade with a straightforward installation process. It's the kind of detail that separates a cared-for Sport from everything else on the road. What's Included 🔲 High Gloss Black Front Grille 1x full replacement grille unit — pre-assembled and ready to fit 📋 Fitment Guide Basic installation reference included in packaging Product Highlights Engineered exclusively for Range Rover Sport L494 (2014–2017) — no universal-fit compromise High gloss black ABS finish delivers a premium, showroom-quality appearance Direct OEM replacement — uses all factory mounting points and clips No drilling, cutting, or bodywork modification required Durable ABS thermoplastic construction resists impact, UV fade, and road debris Replicates original grille geometry for a seamless, rattle-free fit Suitable for both pre-facelift and mid-cycle Sport variants within the 2014–2017 window Complements blacked-out trim packages and SVR-inspired styling builds Lightweight construction — does not affect aerodynamic balance or air intake flow Tool fitment achievable with standard workshop tools in under an hour Compatibility Vehicle Code Years Trim / Notes Fitment Range Rover Sport L494 2014–2017 SE, HSE, HSE Dynamic, Autobiography Direct Fit Range Rover Sport L494 2013 First model year — grille surround differs Verify Before Purchase Range Rover Sport L494 2018–2022 Post-facelift — revised grille architecture Not Compatible Range Rover Sport L461 2022–2026 New generation — entirely different platform Not Compatible Range Rover Vogue L405 2013–2021 Different grille design and dimensions Not Compatible Range Rover Velar L560 2018–2022 Closed-face grille — not applicable Not Compatible Installation Notes Difficulty: Beginner · Estimated Time: 30–60 minutes · Tools Required: Trim removal tools, T20 Torx driver Ensure the vehicle is parked on a level surface with the engine off and fully cooled. Open the bonnet for improved access to the upper grille mounting points. Using a plastic trim removal tool, carefully prise the existing grille away from the bumper surround, starting from the outer edges and working inward to disengage the retaining clips without cracking the bumper fascia. Locate and remove any Torx screws (typically T20) securing the grille to the upper bumper bracket. Keep all hardware — some clips and screws may be reused during installation of the new unit. Fully remove the original grille and set aside. Clean the mounting recess with a dry cloth to remove any accumulated road grime before fitting the replacement. Align the new High Gloss Black Grille with the factory aperture, ensuring all clip housings are correctly positioned against their corresponding receptacles in the bumper surround. Apply firm, even pressure across the grille face to engage all retaining clips simultaneously. Refit any Torx screws removed in step 3 and torque to hand-tight. Inspect the grille perimeter to confirm uniform gaps and a flush fit against the bumper. Close the bonnet and step back to confirm alignment from distance before driving. ⚠ Important: Always use plastic trim removal tools — metal tools risk permanent scratching of the bumper paint and grille finish. If your vehicle has a front parking sensor cluster integrated into the grille surround, verify sensor positioning and clearance after fitment before driving at speed. When in doubt, consult a qualified automotive technician. Built for Range Rover Sport Owners Who Care At Victorious Automotive, every product we stock is chosen with one type of customer in mind — the owner who genuinely cares about their vehicle. If you have any questions about fitment, finish compatibility, or combining this grille with other exterior styling parts for your L494 Sport, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop All Range Rover Sport L494 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Rear Tailgate Lip Spoiler for Range Rover Sport (2014–2020) Premium carbon fiber tailgate enhancement designed to elevate your Sport's rear profile with authentic styling and lasting durability. L494 2014–2020 Carbon Fiber Tailgate Lip Weather-Resistant Direct Fit Overview The Range Rover Sport L494 (2014–2020) commands presence on any road. This Carbon Fiber Rear Tailgate Lip Spoiler refines that authority by adding contemporary styling to the vehicle's rear fascia—a subtle but unmistakable upgrade that separates thoughtfully equipped Sports from standard builds. Machined from genuine carbon fiber, this lip transforms the tailgate's lower edge with clean lines and a contemporary aesthetic. The material's inherent lightweight properties—combined with superior weather resistance—mean this piece endures seasons of UK weather, UV exposure, and daily use without degradation or fading. Installation is straightforward for most owners, though professional fitting ensures the perfect gap and alignment. Once fitted, you'll notice the visual impact immediately: a more sculpted rear, sharper lines, and a finish that signals the level of care you invest in your Sport. What's Included 🎯 Carbon Fiber Lip Single-piece tailgate spoiler, precision-fitted for L494 ⚙️ Mounting Hardware Stainless fasteners and adhesive strips included 📋 Installation Guide Step-by-step instructions with torque specs 🛡️ 30-Day Guarantee Full refund if you're not completely satisfied Product Highlights Genuine carbon fiber construction—lightweight yet rigid Precision-engineered fit for 2014–2020 L494 models Weather-resistant finish withstands rain, salt, and UV Professional-grade adhesive and stainless steel hardware Clean, modern profile enhances rear visual depth Enhanced aerodynamic geometry aids downforce No drilling required—adhesive or bolt-on installation Maintains OEM paint compatibility and panel gaps Backed by our 30-day money-back guarantee Proudly stocked by Victorious Automotive since 2019 Compatibility Model & Year Generation Status Range Rover Sport 2014–2020 L494 Direct Fit Range Rover Sport 2022–2026 L461 Not Compatible Range Rover Sport 2010–2013 L320 Not Compatible Range Rover Vogue L405 / L460 All Not Compatible Check your VIN or chassis plate before ordering. We're here to confirm compatibility: +44 203 943 9919, Mon–Fri 9am–7pm. Installation Difficulty: Moderate | Time: 45–90 minutes Prepare the surface: Clean the tailgate's lower edge thoroughly with isopropyl alcohol. Let dry completely (10 minutes). Test fit: Position the lip without adhesive to verify alignment with the tailgate and body line. Mark any final adjustments. Apply adhesive: Using the supplied heavy-duty automotive tape or adhesive beads, apply to the rear mounting surface of the lip. Secure fasteners: If using bolt-on method, drill pilot holes and install stainless steel fasteners hand-tight, then torque to 8 Nm. Press and hold: Press the lip firmly onto the tailgate for 60 seconds to ensure full adhesive contact. Cure time: Allow 24 hours before exposing to water or vehicle movement for maximum adhesive strength. Professional Installation Recommended: If you're unfamiliar with carbon fiber fitment or adhesive application, book a professional installer. Poor alignment can compromise aesthetics and water sealing. Victorious can recommend approved fitters in your region—call us. Why Choose This Spoiler Carbon fiber isn't just about weight savings—it's about permanence. Unlike paint-matched plastic lips that fade and crack, genuine carbon fiber deepens in character, resists salt spray, and requires nothing more than occasional water rinse and a soft cloth. The L494 Sport is already aggressive. This lip simply completes that story, adding a contemporary accent that signals refinement without shouting. It pairs beautifully with black window trim, darkened lights, or a full aero package. Ready to Elevate Your Sport? Authentic carbon fiber. Direct fit. 30-day guarantee. Worldwide shipping via DHL, FedEx, or UPS. Shop Carbon Fiber Tailgate Lips Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping included +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. Product compatibility information is provided in good faith for reference only; always confirm fitment with your vehicle's specific year, chassis code, and configuration before purchase.

Victorious Automotive · Range Rover Sport L494 · Exterior Styling Carbon Fiber Hood Vents for Range Rover Sport L494 Genuine carbon fiber vents that enhance cooling airflow while adding understated motorsport styling to your L494. L494 2014–2020 Carbon Fiber Direct Fit Engine Cooling Overview The Range Rover Sport L494 (2014–2020) is a dynamic performance SUV that demands equally compelling aesthetics. These carbon fiber hood vents are engineered to replace your OEM vents with genuine, lightweight carbon fiber units that enhance both form and function without compromise. Beyond visual impact, these vents facilitate active heat dissipation from the engine bay, supporting cooler running temperatures during sustained driving and towing. The purposeful design integrates seamlessly with the L494's existing bonnet geometry, requiring no modification or custom drilling—installation is a straightforward bolt-on upgrade. Finished in premium gloss carbon weave, they deliver the same material and precision you'd find on motorsport vehicles, elevating your Range Rover's presence while delivering tangible thermal benefits. What's Included 🏁 Carbon Fiber Hood Vents (Pair) Left & right, gloss finish, ready to install 🔧 Stainless Steel Fasteners All hardware required for direct fit 📋 Installation Guide Step-by-step instructions included Product Highlights 100% genuine carbon fiber construction with superior strength-to-weight ratio Gloss finish carbon weave for factory-quality aesthetic Engineered for direct fit with no modifications required Improves engine bay cooling and thermal management Adds motorsport visual character to your L494 Lightweight alternative to OEM plastic vents Durable resin matrix resists UV degradation Includes all stainless steel fasteners and hardware Simple hand-tool installation (no welding or drilling) Backed by our 30-day money-back guarantee Compatibility Model Year Range Fit Status Range Rover Sport L494 2014–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2010–2013 Not Compatible Always verify your model year and chassis code before ordering. Check your V5C registration document or contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure. Installation Difficulty: Easy · Time: 30–45 minutes Park your Range Rover on a level surface and allow the engine to cool fully. Locate the factory hood vents on either side of the bonnet, just aft of the windscreen frame. Unscrew the three fasteners securing each OEM vent using a T25 Torx driver. Carefully lift and remove the original plastic vents, noting the gasket location. Clean the vent mounting surface with a microfiber cloth to remove any debris or residue. Position each carbon fiber vent, ensure alignment with the bonnet profile, then insert the stainless steel fasteners. Tighten each fastener progressively and evenly to 8 Nm (6 ft-lb) using a torque wrench. Step back and inspect both vents for flush alignment and consistent gaps. Your new carbon fiber hood vents are now active and ready to enhance cooling and styling. Professional Installation Recommended: If you prefer not to install these yourself, our network of Victorious-certified technicians can fit them in approximately one hour. Contact us for installer availability in your region. Complete Your L494 Upgrade Carbon fiber hood vents are the signature finishing touch for a purposefully styled Range Rover Sport. Pair them with our carbon fiber splitters, side skirts, or diffusers to elevate your L494's entire exterior presence. Explore L494 Collection Order today and use code 22GET20 to unlock 20% off when you purchase any two Victorious items. ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with Jaguar Land Rover Limited, the official manufacturer of Range Rover, Defender, Land Rover, and Discovery vehicles. All product names, logos, and brands remain the property of their respective owners. This product is designed, manufactured, and distributed by Victorious Automotive in accordance with all applicable automotive and safety standards.

Victorious · Range Rover Sport L494 · Aerodynamics Carbon Fiber Side Vents for Range Rover Sport L494 Lightweight carbon fiber side vents that sharpen your Sport's profile while improving aerodynamic flow. L494 2018–2020 Carbon Fiber Aerodynamic Direct Fit Overview The Range Rover Sport L494 is engineered for dynamic performance and refined aesthetics. These carbon fiber side vents build on that DNA by adding visual aggression and functional ventilation to your Sport's flanks, instantly elevating its presence on any road. Our carbon fiber vents are constructed from genuine, waterproof material and engineered for direct fit installation. They integrate seamlessly with the OEM body line, creating a cohesive, purposeful look that speaks to your attention to detail. The lightweight construction preserves your Sport's performance without unnecessary weight. Whether you're refining your Sport's stance or preparing for a full aerodynamic upgrade, these vents are the foundation of a truly distinctive appearance. What's Included 🎁 2 × Carbon Fiber Side Vents One pair, driver + passenger side 📋 Installation Guide Step-by-step instructions included ✓ Adhesive Backing Pre-applied for quick, secure fit 📦 Protective Packaging Damage-free delivery guaranteed Product Highlights 100% genuine carbon fiber construction Waterproof and UV-resistant finish Seamless direct fit for L494 (2018–2020) Lightweight design preserves performance Enhances aerodynamic flow Pre-installed adhesive backing No drilling or modifications needed OEM-matched body integration Professional appearance, DIY installation Backed by 30-day money-back guarantee Compatibility Model Year Range Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Verify your vehicle's model year and body code before ordering. These vents are engineered exclusively for the L494 generation (2018–2020). If you own a different generation, contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) for alternatives. Installation Difficulty: Beginner | Time: 15–20 minutes Prepare the surface. Clean both sides of your Sport's body with isopropyl alcohol and allow to dry completely. This ensures optimal adhesive contact. Position the vents. Dry-fit each vent on its respective side (driver/passenger) to verify alignment with the body line. Apply the vents. Carefully peel back the adhesive backing and press firmly from top to bottom, working out any air bubbles. Set and cure. Allow 24 hours of cure time before washing or exposing the vents to moisture. Inspect edges. Check all perimeter edges for secure adhesion. Use heat from a heat gun if needed to improve bond strength in cold conditions. Important: Ensure your Sport's body surface is clean and dry before installation. Installation in temperatures below 10°C may reduce adhesive strength—wait for warmer conditions if possible, or use a heat source to warm the application area. Complete Your L494's Look Carbon fiber side vents are the finishing touch that transforms your Range Rover Sport from standard to standout. Pair them with our matching aerodynamic upgrades for a fully integrated, purposeful aesthetic. Shop Range Rover Sport L494 Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 stars – 12,300+ verified reviews ✓ 30-day money-back guarantee 📦 Worldwide DHL, FedEx, UPS, TNT shipping ☎️ +44 203 943 9919 – Expert support Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover (JLR). All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for the specified vehicle model(s) and is not an OEM product.

Victorious Automotive · Range Rover Evoque · Interior Lighting Range Rover Evoque Additional Ambient Lighting Upgrade — Fiber Optic LED Interior Strip Kit Transform your Evoque's cabin atmosphere with a premium fiber optic LED band lighting system — delivering crisp, cool-white illumination along door panels and interior trim with a clean, factory-flush finish. Range Rover Evoque L538 Range Rover Evoque L551 Fiber Optic LED Interior Ambient Light 12000K Cool White 4W Low Draw Cree LED Chip Plug & Fit Door Panel Lighting 2400lm Output Overview The Range Rover Evoque occupies a unique space in the Land Rover lineup — compact enough for urban life, yet premium enough to demand a cabin that feels genuinely considered at every hour of the day. Whether you own the first-generation L538 or the refined L551, the factory ambient lighting spec often leaves enthusiasts wanting more depth, more presence, and more atmosphere once the sun goes down. This fiber optic LED ambient lighting kit is purpose-built to address exactly that. Using genuine Cree LED chip technology and a flexible fiber optic band format, the system layers soft, continuous illumination along your door panels and interior trim lines — creating a seamless glow that integrates naturally with the Evoque's interior architecture rather than looking like an afterthought. At 12000K colour temperature, the output reads as a clean, crisp cool white that complements the Evoque's contemporary design language without overpowering it. Each of the four included strips ships at one metre in length and carries its own dedicated light source, giving you independent control over placement and intensity across all four door panels. The result is a balanced, symmetrical lighting upgrade that elevates the Evoque cabin to a level that genuinely rivals far more expensive factory options — installed without the need for professional fitting or wiring specialists. What's Included 💡 Fiber Optic LED Strips × 4 1 metre each, individual light source per strip 🔌 Light Source Units × 4 Cree LED chip, 4W, 12000K per unit 📄 Installation Instructions Step-by-step printed fitting guide 🔧 Mounting Adhesive Pre-applied strip backing for clean fitment Product Highlights Genuine Cree LED chip technology for consistent, long-life output 12000K cool white colour temperature — sharp, premium cabin feel 2400 lumens total output across four strips Fiber optic band format for seamless, even illumination with no hotspots 4W total draw — negligible impact on vehicle battery and electrics Each strip ships at 1 metre — ideal for full door panel coverage Independent light source per strip for flexible installation routing Not EL (electroluminescent) wire — true LED fiber optic performance Lightweight 0.5kg kit — no structural modification required Compatible across multiple Range Rover and Land Rover variants Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2011–2018 Direct Fit Range Rover Evoque L551 2019–Present Direct Fit Range Rover Sport L494 2013–2020 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Classic MK1 1970–1996 Direct Fit Range Rover P38A MK2 1994–2002 Direct Fit Range Rover L322 MK3 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Sport L461 2022–Present Verify Before Order Range Rover Vogue L460 2022–Present Verify Before Order Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 60–90 minutes  ·  No professional fitting required Gently remove door panel trim inserts or lower sill trim pieces to expose the routing channel. No permanent removal is necessary — light prying with a trim tool is sufficient on most Evoque variants. Clean the mounting surface thoroughly with an isopropyl alcohol wipe and allow to dry completely before applying the adhesive-backed fiber optic strips. This ensures a lasting bond. Route each fiber optic strip along the desired panel line — typically along the lower door card edge or accent trim groove — following the natural contour of the interior surface. Connect each strip's light source unit to a switched 12V feed, such as the courtesy light circuit or an existing interior lighting circuit, so the ambient lights activate with the cabin lighting. Tuck all wiring neatly behind trim panels using the existing cable routing channels and refit all trim pieces. Test each strip individually before final reassembly. Power on and verify uniform illumination across all four strips. Minor positional adjustments can be made within the first few minutes before the adhesive fully cures. ⚠ Note: Always disconnect the vehicle's negative battery terminal before working with interior wiring circuits. If you are unfamiliar with automotive electrics, we recommend having the wiring connection completed by a qualified auto electrician. The fiber optic strips themselves require no electrical connection and can be positioned independently of the light source units. Elevate Your Evoque Interior Browse the full collection of Range Rover Evoque interior upgrades at Victorious Automotive — curated specifically for owners who expect more from their cabin. Shop Evoque Accessories Shop Evoque L551 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes. Always verify fitment with your specific vehicle's VIN and build specification before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Range Rover · Interior Lighting Range Rover Additional Ambient Lighting Upgrade — Fiber Optic Door Panel Illumination Transform your Range Rover's interior atmosphere with precision-engineered fiber optic band lighting that wraps your door panels in a seamless, continuous glow — no harsh spots, no EL strips, just genuine ambient refinement. RR Classic MK1 P38A MK2 L322 MK3 L405 MK4 RR Sport 1970–2016+ Fiber Optic Door Panel Lighting Interior Atmosphere Direct Fit Not EL Light Overview The Range Rover has always set the benchmark for luxury SUV interiors — commanding, refined, and unmistakably premium. Whether you're driving a classic MK1, the iconic P38A, the sophisticated L322, a contemporary L405, or an RR Sport, the interior deserves lighting that matches the vehicle's standing. Factory ambient lighting, where fitted, is often limited in coverage and colour consistency — leaving door panels under-lit and the overall atmosphere short of what these vehicles are capable of. This fiber optic band ambient lighting kit fills that gap with precision. Unlike EL (electroluminescent) strips that can produce uneven glow and degrade quickly, genuine fiber optic bands distribute light uniformly and continuously along their entire length — no hot spots, no visible light sources, just a clean, elegant line of illumination that follows the contours of your door panel. Each of the four 1-metre bands comes paired with its own dedicated light source, making installation flexible and the end result consistent across all four doors. Fitting is straightforward for anyone comfortable removing door panel trim — the bands are routed behind the existing panel architecture and connected to a suitable 12V source. The result is a measurable step up in perceived interior quality: the kind of subtle, well-considered upgrade that Range Rover enthusiasts will appreciate immediately and notice every time they open a door after dark. What's Included 💡 4× Fiber Optic Bands 1 metre each — one per door panel 🔦 4× Dedicated Light Sources Individual unit per band for consistent output 📋 Installation Instructions Step-by-step fitting guide included Product Highlights Genuine fiber optic technology — not EL strip lighting Uniform, continuous glow along the full 1m band length Four individual light sources for consistent door-to-door output Covers all four door panels in a single kit Subtle, premium atmosphere — not garish or overloud Compatible with multiple Range Rover generations spanning 1970–present No visible hotspots or light source bleed-through Flexible band design routes easily behind door card trim Connects to standard 12V vehicle power — no specialist wiring Reversible installation — no permanent modification to factory trim Compatibility Model Generation / Code Years Fitment Range Rover Classic MK1 1970–1996 Direct Fit Range Rover P38A MK2 1994–2002 Direct Fit Range Rover L322 MK3 2002–2012 Direct Fit Range Rover Vogue L405 MK4 2012–2021 Direct Fit Range Rover Sport L320 / L494 2005–2022 Direct Fit Range Rover Sport L461 2022–2026 Verify Before Purchase Range Rover Vogue L460 2022–2026 Verify Before Purchase Range Rover Velar L560 2017–2024 Verify Before Purchase Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5–3 Hours  ·  Tools Required: Trim removal tools, panel clips, 12V power tap Remove each door card carefully using appropriate trim clips and plastic pry tools — avoid metal tools directly on the panel to prevent marking. Plan your routing path for each fiber optic band along the lower or mid-section of the door panel interior, following the natural contour lines of the trim. Position each light source unit in a concealed location within the door void — behind the armrest pocket or lower panel area works well on most Range Rover generations. Secure the fiber optic band along its intended route using the supplied adhesive or trim-safe tape, ensuring it lies flat and taut without kinks. Connect each light source to a suitable switched 12V feed — the interior door lamp circuit is the most commonly used tap point for a clean, ignition-controlled result. Refit the door card, test each panel before fully re-clipping, and adjust band positioning if any light bleed is visible at the panel edges. Repeat for all four doors, confirming consistent output and colour balance across the full set before completing the final fitment. ⚠ Note: Always disconnect the vehicle battery before accessing door wiring on vehicles with airbag-equipped door panels. On newer variants (L405, L494 and above), consult your vehicle's wiring diagram before tapping any low-current circuits. If in doubt, have a qualified auto electrician complete the connection work. Elevate Your Interior. Every Journey. Ambient lighting is one of the most impactful — and most underrated — interior upgrades available to Range Rover owners. This fiber optic kit delivers a factory-quality result at a fraction of the cost of a dealer-fitted solution. Browse our full Range Rover interior collection or speak with our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like guidance on compatibility for your specific model year. Shop Range Rover Interior Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover / Range Rover / Defender · Key Fob Accessories Premium Leather & Stainless Steel Key Fob Cover – Land Rover, Range Rover & Defender (2018–2024) Protect your key fob from peeling, cracking, and everyday damage with a tailored leather and stainless steel cover — purpose-built for modern Land Rover and Range Rover models from 2018 onwards. L405 L494 L460 L461 L663 Defender 2018–2024 Premium Leather Stainless Steel 3 Colour Options Direct Fit No Tools Required Overview From the Defender L663 to the Range Rover Vogue L460, every Land Rover produced since 2018 shares one common weak point — the OEM key fob. The standard plastic casing is prone to peeling, scuffing, and surface degradation over time, leaving an otherwise immaculate interior let down by a worn-looking key. It's a detail that Land Rover owners who take pride in their vehicles simply shouldn't have to accept. This key fob cover addresses the problem directly. Crafted from genuine high-quality leather and reinforced with a precision-formed stainless steel frame, it wraps your existing key fob in a layer of premium protection that's both functional and refined. The leather construction echoes the material language found inside the cabin itself, while the stainless steel adds structural integrity and a confident weight that lifts the feel of the key in your hand. Available in Black, Red, and Blue, the cover allows a degree of personalisation without compromising the understated character these vehicles are known for. Installation requires no tools and takes seconds — simply snap the cover over your existing key fob and the fit is secure, the finish is flush, and the electronics remain fully accessible and unobstructed. What's Included 🔑 Leather Key Fob Cover × 1 Premium leather & stainless steel construction, ready to fit 📦 Protective Packaging Securely packaged to arrive in perfect condition 📋 Fitment Guide Simple installation instructions included Product Highlights Defends against OEM plastic peeling and surface degradation Genuine leather exterior for a refined, premium feel Stainless steel frame adds durability and structural rigidity Full access to all buttons — no interference with key function Protects key electronics from knocks, scratches, and impacts Available in Black, Red, and Blue to suit your preference Tool-free installation — fits over existing key fob in seconds Compatible with five modern Land Rover platform codes Secure snap-fit design stays firmly in place during daily use Complements the interior trim quality of all compatible models Compatibility Model Code Years Fit Range Rover Vogue L405 2018–2021 Direct Fit Range Rover Sport L494 2018–2022 Direct Fit Range Rover Vogue L460 2022–2024 Direct Fit Range Rover Sport L461 2022–2024 Direct Fit Defender 90 / 110 / 130 L663 2020–2024 Direct Fit Range Rover Velar L560 2018–2024 Verify Before Purchase Range Rover Evoque L551 2019–2024 Verify Before Purchase Discovery Sport L550 2018–2024 Not Compatible Installation Notes 🛠 Difficulty: Very Easy  ·  ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Tools Required: None Remove your Land Rover or Range Rover key fob from your pocket or bag and ensure it is clean and dry before fitting. Orient the leather cover so the button cut-outs align precisely with your key fob's existing buttons — take a moment to confirm correct orientation before proceeding. Begin at one end of the key fob and press the cover gently into position, working along the length until the stainless steel frame snaps securely around the casing. Press firmly around all edges to confirm a flush, secure fit. Test all buttons for full responsiveness and check the key fob signal operates normally before use. Your key fob cover is now fitted and ready. No adhesive, no tools, and no permanent modification to your key fob. ⚠ Compatibility Note: This cover is designed for the specific key fob style used across models L405, L494, L460, L461, and L663 from 2018 onwards. If you are unsure of your key fob style or model code, please contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. We strongly recommend verifying your model code prior to ordering. Elevate Every Detail The key fob is the first thing you touch every time you approach your vehicle. Make it worthy of what's waiting on the other side of the door. Free worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Defender Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purpose of product fitment identification. Always verify compatibility with your specific vehicle and key fob variant before purchase.