New products

Victorious Automotive · Land Rover Discovery 4 · Infotainment & Navigation Android Infotainment System – Land Rover Discovery 4 LR4 L319 (2009–2016) A direct-fit 7-inch Android head unit engineered specifically for the Discovery 4 LR4 L319, delivering GPS navigation, Bluetooth, Wi-Fi, and 1080p HD media in a clean, factory-style double-DIN install. L319 2009–2016 Android OS 7" 1080p HD Double DIN Built-in GPS Bluetooth Wi-Fi Steering Wheel Control DALH-8735 Liandlee 12V Overview The Land Rover Discovery 4 LR4 (L319) is one of the most capable and enduring mid-size SUVs ever produced — a vehicle equally at home navigating Mayfair as it is tackling a Welsh ridge line. But factory infotainment from the 2009–2016 production run has aged considerably, leaving owners with slow sat-nav, limited smartphone integration, and an audio experience that doesn't match the rest of the vehicle's character. This Android head unit from Liandlee (model DALH-8735) is purpose-built to fit the Discovery 4's double-DIN aperture as a seamless, factory-style replacement. Running Android on a 1.6GHz processor with 1GB RAM and 16GB ROM, it transforms the cabin into a genuinely modern connected environment — with full GPS navigation, Bluetooth audio and hands-free calling, Wi-Fi connectivity, AM/FM/RDS radio, and Mirror Link for both iOS and Android devices. The 7-inch 1080p HD capacitive touchscreen integrates cleanly with your Discovery 4's existing steering wheel controls and retains support for USB, SD card, and multi-format media playback. Available in multiple interface languages including English, French, German, Spanish, Italian, Russian, and Arabic, this is a genuine upgrade built to the standard this vehicle deserves. What's Included 📺 7" Android Head Unit DALH-8735 · Double DIN · 1080p HD display 🔌 Vehicle Wiring Harness Direct-fit plug for Discovery 4 L319 📡 GPS Antenna External mount for optimal signal reception 📻 Radio Antenna Adapter Retains AM/FM/RDS antenna connection 🎙️ Built-in Microphone Integrated for hands-free calling 🔧 Mounting Hardware Brackets and fascia trim surround 📄 Installation Guide Step-by-step printed instructions Product Highlights 7-inch capacitive touchscreen at full 1080p HD resolution for sharp, responsive interaction Android operating system with 1.6GHz processor, 1GB RAM and 16GB onboard ROM Built-in GPS navigation — works offline, no subscription required Bluetooth hands-free calling and A2DP wireless audio streaming Wi-Fi connectivity for app updates, streaming, and Google Maps live traffic Steering wheel control compatibility — retain your existing controls without adapters AM / FM / RDS radio tuner with station name display Mirror Link support for screen mirroring from iOS and Android smartphones USB and SD card inputs with support for MP3, MP4, WMA, JPEG and Video CD formats Multi-language OSD: English, French, German, Spanish, Italian, Russian, Arabic Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 LR4 L319 2009 – 2016 Direct Fit Discovery 4 with factory CD/DVD player L319 2009 – 2016 Direct Fit Discovery 4 with factory OEM navigation system L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 predecessor 2004 – 2009 Not Compatible Land Rover Discovery 5 L462 2017 – present Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 minutes  ·  Tools Required: Trim removal tools, screwdrivers Disconnect the vehicle battery before beginning any wiring work to prevent electrical faults. Using plastic trim removal tools, carefully prise away the centre console surround panel around the existing head unit — work from the edges inward to avoid scratching the fascia. Remove the factory head unit by unscrewing the mounting bolts (typically four screws in the double-DIN cage) and slide the unit forward to disconnect the existing wiring looms. Connect the supplied vehicle-specific wiring harness to the Android unit, matching each connector. Plug in the GPS antenna cable and route it toward the windscreen or dashboard for signal clarity. Connect the radio antenna adapter to retain AM/FM reception, and route the microphone cable to a discreet position near the driver's sun visor or A-pillar. Slide the new unit into the double-DIN aperture and secure with the provided mounting brackets. Reattach the fascia trim surround and centre console panel. Reconnect the vehicle battery, power on the unit, and confirm GPS lock, Bluetooth pairing, radio reception, and steering wheel control functionality before finalising the installation. Important: This unit is designed to replace factory CD or DVD player configurations only. It is not compatible with vehicles fitted with the original Land Rover factory navigation system. If you are unsure of your current head unit configuration, please contact us at +44 203 943 9919 or send a photograph of your interior before ordering. We are unable to accept returns on incorrectly ordered units once despatched. Upgrade Your Discovery 4 Infotainment Browse our full range of Land Rover Discovery 4 accessories and interior upgrades, curated for owners who demand the best from their L319. Shop Discovery 4 Collection Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious · Mercedes-Benz · Interior Trim Mercedes-Benz C-Class Door Window Switch Decoration Trim Premium aluminium switch trim set elevating your C-Class interior with refined sophistication and seamless integration. W205 / W206 2015–2023 Aluminum Alloy 14-Piece Set Direct Fit Overview Engineered for the Mercedes-Benz C-Class W205 and W206 (2015–2023), this 14-piece Door Window Switch Decoration Trim set delivers a refined aesthetic upgrade to your cabin. Each piece is machined from premium lightweight aluminium alloy, designed to complement the factory interior architecture whilst adding a sophisticated, bespoke touch. Whether you own a C200, C300, C43 AMG, or C63 AMG, these trim pieces integrate seamlessly with existing door panel switch clusters. The finish is understated yet purposeful—adding visual depth without compromising the minimalist elegance Mercedes is known for. Installation is straightforward and non-invasive. No drilling, no modifications to your vehicle. Simply remove existing trim rings, fit the new aluminium pieces, and secure them in place. Perfect for owners seeking incremental interior refinement or preparing their cabin for a cohesive upgrade programme. What's Included ⚙️ 14-Piece Trim Set Full coverage for all door-mounted switches 🔧 Installation Guide Step-by-step fitment instructions included ✓ Factory Fitment Precision engineered for perfect alignment Product Highlights Premium lightweight aluminium alloy construction Refined brushed finish resists fingerprints Non-invasive installation—no drilling required Direct fit for 2015–2023 C-Class models Seamless integration with factory door panels 14-piece set covers all door switch positions Durable corrosion-resistant material Enhances cabin visual hierarchy Compatible with all trim levels (C200–C63 AMG) Weight: 0.06 kg—negligible impact on vehicle dynamics Compatibility Model Year Range Body Code Fitment C-Class Sedan 2015–2021 W205 Direct Fit C-Class Sedan 2021–2023 W206 Direct Fit C43 AMG Sedan 2023 W206 Direct Fit C63 AMG Sedan 2015–2023 W205 / W206 Direct Fit C-Class Estate (C204) 2011–2014 W204 Not Compatible E-Class, S-Class All Years Various Not Compatible Note: Always verify your vehicle's body code (VIN decoder) before ordering. Fitment is guaranteed for W205 (2015–2021) and W206 (2021–2023) C-Class sedans only. Installation Difficulty Level: Beginner | Time: 20–30 minutes Prepare your workspace: Park in a well-lit area. Open all four doors and locate existing window switch trim rings on each door panel. Remove factory trim: Using a plastic trim tool, gently prise away the existing switch trim. Work slowly to avoid scratching the surrounding panel. Clean the surface: Wipe the exposed switch cluster with a microfiber cloth to remove dust and debris. Position new trim: Align the new aluminium trim piece with the switch opening. Ensure all edges sit flush with the door panel. Secure trim: Press firmly until you hear or feel a click. The adhesive backing will bond instantly; factory clips will hold the piece in place. Repeat for remaining doors: Work through all four doors, ensuring consistent alignment and fitment. Final inspection: Close all doors and verify trim sits flush. Test window switches to ensure full operation. Important: Do not force trim pieces into position. If resistance is met, remove the piece and recheck alignment. Improper installation may damage door panel trim or switch mechanisms. Complete Your C-Class Upgrade Subtle refinement is the hallmark of German automotive design. This trim set embodies that philosophy—understated, purposeful, and built to last. Order your 14-piece set today and elevate your interior in under 30 minutes. Shop Now Use code 22GET20 for 20% off when you purchase any 2 items. 4.9/5 · 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping via DHL, FedEx, UPS, TNT Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes-Benz distributor. All product names, logos, and brands are the property of their respective owners. This product is designed for compatibility; fitment and performance are the responsibility of the end user. Always verify vehicle specifications and consult a qualified technician if unsure about installation.

```html Porsche · Interior · Carbon Fiber Trim Real Carbon Fiber Steering Wheel Trim for Porsche 911 & 718 Premium genuine carbon fiber steering wheel decoration panel — adds motorsport-grade aesthetics with lightweight, durable construction and tool-free installation. Carbon Fiber 911 & 718 2016–2019 150g Lightweight Direct Fit Overview Engineered for Porsche enthusiasts who demand both authentic motorsport styling and functional precision. This genuine carbon fiber steering wheel trim transforms your 911, 718, Cayenne, Macan, and Panamera interior with a bespoke technical finish that complements Porsche's driver-first design language. Hand-finished carbon fiber construction delivers a weight of just 150g, ensuring minimal impact on steering feel while maximizing visual presence. The trim is ISO 9001 certified and finished to exact OEM dimensions—26cm width, 27cm length, 3cm height—ensuring a perfect fit without modification or compromise. Installation is adhesive-backed and takes minutes. No drilling, no fasteners, no dealer visits. This is the upgrade that transforms your driving position from functional to fully connected with your machine. What's Included 🏴 Carbon Fiber Trim Panel Real weave, hand-finished 🧴 Automotive Adhesive Tape Pre-applied, double-sided 📋 Fitment Guide Model-specific installation notes ✅ ISO 9001 Certified Quality assurance verified Product Highlights 100% genuine carbon fiber with visible weave pattern Ultra-lightweight at just 150g—no steering impact Precision engineered to exact OEM dimensions Pre-applied automotive-grade adhesive tape ISO 9001 certified manufacturing and QC Tool-free installation—no drilling or fasteners required Fits Porsche 911, 718, Cayenne, Macan & Panamera Hand-finished weave with deep visual depth Durable to temperature extremes and UV exposure Authentic motorsport aesthetics for daily driving Compatibility Porsche Model Year Range Fitment 911 (992, 991.2) 2016–2019 Direct Fit 718 Boxster / Cayman 2016–2019 Direct Fit Cayenne (E3) 2015–2020 Direct Fit Macan (DM) 2014–2019 Direct Fit Panamera (971) 2017–2019 Direct Fit Older 911 / Carrera Pre-2014 Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Clean the steering wheel area — Use a damp cloth to remove dust, oils, and residue from the steering wheel surround where the trim will sit. Allow to dry completely. Position the trim — Align the carbon fiber panel with the steering wheel trim area, ensuring symmetry and proper fitment on both sides. Apply pressure — Press firmly across the entire surface for 30 seconds to activate the automotive adhesive tape. Work from center outward to avoid air pockets. Allow curing time — Wait 24 hours before driving or handling the steering wheel to ensure maximum adhesive bond. Final check — Verify the trim is flush and secure. If any edges lift slightly, apply additional pressure or consider professional adhesive for extended durability. Note: This trim is designed for the steering wheel surround area. Do not apply over airbag covers or safety systems. If you're unsure of the exact fitment location for your model year, consult the included guide or contact support before installation. Own the Driving Experience Transform your Porsche's interior with genuine carbon fiber precision. Every touch, every corner, every moment behind the wheel now reflects the engineering excellence your machine deserves. Shop Carbon Fiber Trims Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ verified reviews 🌍 Worldwide Shipping — DHL, FedEx, UPS, TNT ✅ 30-Day Money Back — No questions asked 📞 Expert Support — +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories specialist. We are not affiliated with Porsche AG, Porsche Cars North America, or any official Porsche entity. All vehicle names and model designations are used for fitment reference only. Carbon fiber trim installation does not void manufacturer warranty when performed correctly and does not affect safety systems or airbag functionality. ```

Premium Automotive · Porsche Cayenne · Interior Trim Carbon Fiber Gear Shift Trim for Porsche Cayenne 2018–2019 OEM-grade real carbon fiber gear shift head cover. Elevate your cabin's interior with precision-engineered German engineering aesthetics. Porsche Cayenne 2018–2019 Real Carbon Fiber Interior Trim Direct Fit Premium Finish Overview This carbon fiber gear shift trim is engineered specifically for the Porsche Cayenne 2018–2019 generation. Crafted from genuine carbon fiber weave, it replaces the factory plastic surround with a material that echoes Porsche's race-bred heritage and passion for lightweight performance. The visible weave texture and gloss finish catch light beautifully, transforming one of the most frequently touched surfaces in your cabin into a statement of intent. Every time you reach for the gearbox, you're reminded that your Cayenne is a driver's vehicle. The tactile quality of real carbon fiber—coupled with its unmistakable appearance—elevates the entire interior experience. Unlike wrap-around covers, this trim integrates seamlessly into the existing dashboard architecture, maintaining OEM proportions and panel alignment. No modifications or tools required. Pre-applied automotive-grade double-sided tape ensures secure, permanent adhesion to your factory gear shift surround. The installation is straightforward, reversible if needed, and leaves zero residue when removed. The weave pattern is uniform across the entire surface, and the high-gloss clear coat provides long-lasting durability against dust, oils, and UV exposure. What's Included 🎨 Carbon Fiber Gear Shift Cover Genuine carbon fiber, gloss finish 🔧 Pre-Applied Adhesive Tape Double-sided automotive-grade 📦 Installation Guide Step-by-step with safety notes ✓ Warranty Card 12-month manufacturing guarantee Product Highlights Real Carbon Fiber Weave — Not vinyl wrap or plastic. Genuine woven carbon with epoxy resin composite. OEM-Spec Direct Fit — Engineered to match Porsche Cayenne 2018–2019 gear shift dimensions precisely. Gloss Clear Coat Finish — Protected against fingerprints, dust, and UV degradation for years of showroom appearance. Pre-Applied Adhesive — No separate glue, no mess. Peel and press for permanent, secure installation. Lightweight & Durable — Carbon fiber remains lighter than plastic while offering superior strength and heat resistance. Interior Enhancement — Transforms the most-touched surface in your cabin into a premium focal point. Zero Modifications — Fits over factory trim. No drilling, cutting, or factory part removal required. Reversible Installation — Can be safely removed without damage to underlying trim panels or residue buildup. Improved Grip Feel — Carbon fiber surface provides subtle texture improvement over slick plastic. German Engineering Aesthetics — Echoes Porsche's racing DNA and commitment to performance-first design. Compatibility Model Year Range Fitment Porsche Cayenne 2018–2019 Direct Fit Porsche Cayenne 2020+ Not Compatible Porsche Cayenne Coupe 2020+ Not Compatible Other Porsche Models All Years Not Compatible Installation Difficulty Level: Beginner | Time Required: 10–15 Minutes Prepare the Surface — Power off the vehicle. Clean the existing gear shift trim with warm, damp cloth to remove dust, oils, and residue. Allow to dry completely (5–10 minutes). Position the Trim — Carefully peel back one corner of the pre-applied adhesive tape. Align the carbon fiber trim over the factory gear shift surround, ensuring equal spacing on all sides. Do not apply pressure yet. Apply Gradually — Starting from the center, press downward with firm, even pressure, working outward toward the edges. Use your thumb or the heel of your hand—avoid finger tips to prevent uneven creasing. Secure All Edges — Once the central area is adhered, pay special attention to the perimeter edges. Apply sustained pressure for 30–60 seconds to ensure full contact with the factory trim surface. Final Check — Visually inspect for any bubbles or gaps. If air pockets form, gently lift the affected edge, press down again, and smooth outward. Allow Cure Time — Leave the vehicle parked with the climate control off for at least 24 hours before operating the gear shift heavily. The adhesive requires full cure for permanent hold. Important: Do not operate the gear shift or apply downward pressure for at least 24 hours after installation. The adhesive requires full cure time. If installation occurs in temperatures below 10°C (50°F), extend cure time to 48 hours. Ready to Upgrade Your Cayenne's Interior? Transform your cabin with genuine carbon fiber. This trim captures the attention of every passenger and elevates your daily driving experience with a material that speaks to Porsche's uncompromising philosophy. Order now and take delivery within 5–7 working days. Add to Cart Use code 22GET20 for 20% off any 2 items. ✓ 30-Day Money Back Guarantee ✓ Worldwide Shipping via DHL, FedEx ✓ 4.9/5 Stars • 12,300+ Reviews ✓ Premium Support +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with Porsche AG, Porsche Cars Great Britain, or Porsche Cars North America. All vehicle names, logos, and specifications are trademarks of their respective manufacturers. This product is an aftermarket accessory designed for compatibility; it is not an official Porsche product. Installation and use are at the owner's sole responsibility.

BMW · 3 Series G20/G28 · Interior Trim Carbon Fiber Style ABS Chrome Center Console Trim for BMW 3 Series G20/G28 325Li Premium carbon fiber aesthetic center console trim—elevate your BMW 3 Series interior with sleek, modern styling in seconds. G20 G28 325Li 2019–2020 Carbon Fiber ABS Plug & Play Premium Finish Overview The BMW 3 Series G20 and G28 325Li (2019–2020) represent a pinnacle of modern sedans—precise engineering meets refined aesthetics. Your interior deserves trim that matches that standard. This carbon fiber style ABS chrome center console decoration delivers exactly that: contemporary styling without compromise. Manufactured from high-quality ABS plastic with a meticulously applied carbon fiber finish, this trim transforms the look of your center console instantly. The glossy chrome accents catch light beautifully, creating depth and visual interest that lifts the entire dashboard environment. Two pieces allow you to customize multiple zones—whether center stack, steering column surround, or trim highlights. Installation is straightforward via premium automotive adhesive tape backing. No drilling, no permanent changes. The material is durable, UV-resistant, and designed to withstand daily use without fading or peeling. Your BMW deserves better than standard—this trim proves that premium personalization doesn't have to be complicated. What's Included 📦 2x Center Console Trim Pieces Carbon fiber finish with chrome accents 🔧 Pre-Applied Adhesive Tape Ready-to-install backing strips 📋 Installation Guide Step-by-step instructions included ✓ ISO9001 Certified Quality tested and verified Product Highlights Carbon fiber finish with genuine chrome detail accents Precision-engineered ABS construction—ultra-lightweight yet durable Pre-applied automotive-grade adhesive tape for seamless fit Direct-fit design—zero modifications to your BMW interior UV-resistant coating prevents fading and degradation 10cm (W) × 5cm (H) × 20cm (L)—optimized proportions for G20/G28 Premium finish matches OEM quality and standard Two-piece set allows multiple trim locations Only 100g per piece—no weight penalty Professional appearance suitable for any interior color scheme Compatibility Vehicle Model Year Range Fitment Status BMW 3 Series G20 2019–2020 Direct Fit BMW 3 Series G28 2019–2020 Direct Fit BMW 325Li G20/G28 2019–2020 Direct Fit BMW 3 Series (Earlier) Pre-2019 Not Compatible BMW 3 Series (Later) 2021+ Not Compatible Installation Notes Difficulty Level: Easy | Time Required: 10–15 minutes Prepare the surface: Clean and completely dry your center console area with a microfiber cloth. Remove any dust, oils, or residue. Position the trim: Carefully align the first trim piece with your target location. Use a dry run to confirm perfect placement before adhesive contact. Apply with care: Peel back the adhesive tape backing slowly and press the trim piece firmly into position. Hold for 10–15 seconds. Repeat for second piece: Follow the same process for the second trim component, ensuring symmetry if applicable. Allow cure time: Wait 24 hours before exposing the trim to extreme heat or washing to ensure full adhesive bond. ⚠ Important: Ensure your interior surface is completely clean and dry before installation. Professional installation is recommended for optimal results and warranty coverage. Do not apply directly over existing trim without removal. Elevate Your BMW 3 Series Interior Premium carbon fiber styling isn't a luxury—it's an investment in how you experience your daily drive. Your BMW deserves better. This trim delivers that polish in minutes, backed by quality you can trust. Shop Carbon Fiber Trim Now Use code 22GET20 for 20% off any 2 items. ✓ 4.9/5 Stars • 12,300+ Reviews ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping via DHL & FedEx ✓ +44 203 943 9919 Mon–Fri 9am–7pm This product is designed and manufactured by independent suppliers and is not affiliated with, endorsed by, or approved by BMW AG or Jaguar Land Rover. All vehicle names, logos, and trademarks are the property of their respective manufacturers. This trim is an aftermarket accessory and is sold as-is for personalisation and styling purposes only.

BMW · X5 G05 · Exterior Trim Front Grille Decorative Trim Strips for BMW X5 G05 (2019) Premium ABS trim strips that elevate your X5's front-end presence with refined, factory-inspired detailing. G05 2019 ABS Plastic Shiny Silver 14-Piece Set Direct Fit Overview Your BMW X5 G05 is engineered for presence on the road. These front grille decorative trim strips are precision-engineered to complement the X5's aggressive front fascia, adding visual depth and a contemporary edge that enhances the vehicle's natural athleticism. Crafted from premium ABS plastic in shiny silver, each strip is individually molded to fit the exact contours of your grille opening. The result is seamless integration—no gaps, no misalignment—just cohesive design that looks factory-correct from every angle. Installation is straightforward with secure mechanical fastening. Unlike adhesive-only solutions, these strips lock into place and stay there, resisting vibration and road conditions. Included installation guide walks you through every step in under 30 minutes. What's Included ✦ 14x Grille Trim Strips Full front grille coverage, shiny silver finish ✦ Installation Hardware All fasteners and clips included ✦ Fitting Guide Step-by-step instruction manual ✦ Victorious Support 30-day money-back guarantee included Product Highlights Premium ABS plastic—rigid, UV-resistant, durable in all climates Shiny silver finish reflects light for premium visual impact Precision-molded for exact G05 fitment, no modifications needed Secure clip-and-fastener design prevents vibration and movement 14-piece configuration covers entire grille opening seamlessly Factory-grade appearance—indistinguishable from OEM styling Resists fading, cracking, and UV degradation over time DIY-friendly installation—no specialist tools required Enhanced aerodynamic visual definition at the front fascia Backed by 30-day money-back guarantee and 4.9★ customer reviews Compatibility Model Year Range Generation Fitment BMW X5 2019–Present G05 (Fifth Generation) Direct Fit BMW X5 (Pre-2019) 2014–2018 F15 (Fourth Generation) Not Compatible BMW X5M (G05) 2020–Present G05 M Performance Direct Fit Before purchase: Verify your X5 year and generation by checking your registration documents or VIN decoder. G05 chassis debuted in 2019. If uncertain, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment. Installation Difficulty: Beginner · Time: 25–30 Minutes Prepare your X5. Park in a well-lit area. Close all doors and ensure the engine is cool. No disconnection of battery or modules required. Remove protective film. Peel backing from each trim strip gently. Do not touch adhesive or clip surfaces with bare hands. Align first strip. Starting from the center of the grille opening, position the first strip horizontally. Press firmly for 5 seconds to set the clip. Install remaining strips. Work outward left and right from center. Ensure each strip aligns flush with adjacent pieces. No gaps should be visible. Secure all fasteners. Once all 14 strips are positioned, go back and tighten all mechanical fastener screws using the included tool. Do not over-tighten. Final inspection. Walk around your X5 and visually confirm all strips are level, flush, and aligned. Test by gently pressing each strip—no movement should occur. Cure time. Allow 24 hours before driving to allow adhesive full bond strength. Note: If strips are misaligned, do not force. Carefully peel back and reposition. Never install strips in temperatures below 10°C or above 35°C—adhesive performance is compromised outside this range. Complete Your X5 G05 Exterior These grille trim strips are the first step toward a fully refined front-end presence. Whether you're building a subtle aesthetic upgrade or preparing for further customization, this 14-piece set delivers factory-grade quality at a fraction of dealership costs. Shop Front Grille Trim Strips Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ Reviews 🚚 Worldwide Delivery via DHL, FedEx, UPS 💼 30-Day Money-Back Guarantee 📞 +44 203 943 9919 – Expert Support Victorious Automotive is an independent accessory specialist. We are not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or Jaguar Land Rover Limited. All product names, logos, and trademarks are the property of their respective holders. This product is designed to be compatible with BMW X5 G05 vehicles; fitment and performance are the responsibility of the installer.

Victorious · Discovery Sport · Interior Trim Carbon Fiber Style Seat Decoration Cover Trim for Land Rover Discovery Sport Upgrade your Discovery Sport interior with authentic carbon fiber styling and premium ABS construction—install in minutes with 3M adhesive backing. Discovery Sport 2015–2017 ABS Plastic Carbon Fiber Finish Easy Install ISO9001 Certified Overview The Land Rover Discovery Sport is a refined compact SUV that demands interior details worthy of its premium positioning. This carbon fiber style seat decoration cover trim elevates your cabin with motorsport-inspired aesthetics while maintaining the build quality your Discovery deserves. Manufactured from premium ABS plastic with an authentic carbon fiber weave finish, this trim piece transforms the seat area with minimal investment. The finish is durable, UV-resistant, and engineered to withstand daily use without fading or peeling. Whether you're upgrading a 2015, 2016, or 2017 model, this piece integrates seamlessly into your existing interior. Installation is tool-free thanks to industrial-grade 3M adhesive backing. No drilling, no modifications, no permanent changes. Remove at any time without damage. The item ships complete and ready to install—simply clean the surface, peel the backing, and position. Most owners complete installation in under 10 minutes. What's Included 📦 Seat Decoration Trim Carbon fiber ABS plastic cover, factory-finished ✓ 3M Adhesive Backing Pre-applied, industrial-grade for secure fit 📏 Precision-Fit Design Engineered for Discovery Sport seat area 🔒 Ready to Install No tools, no modifications required Product Highlights Carbon fiber weave finish for authentic motorsport styling Premium ABS plastic with UV-resistant coating ISO9001 certified manufacturing quality Direct fit for all 2015–2017 Discovery Sport models Pre-applied 3M industrial adhesive—no tools needed Lightweight design at just 491g for easy handling Non-destructive installation and removal Dimensions: 45cm × 32cm × 9cm for optimal coverage Durable finish resists scratches and fading Shipped complete and ready to install Compatibility Model Year Compatibility Land Rover Discovery Sport 2015 Direct Fit Land Rover Discovery Sport 2016 Direct Fit Land Rover Discovery Sport 2017 Direct Fit Land Rover Discovery Sport 2018+ Not Compatible Other Land Rover Models All Not Compatible Installation Installation Overview Difficulty: Beginner | Time: 5–10 minutes | Tools Required: None Power off your vehicle and open all doors for full access to the seat area. Locate the seat decoration area where the trim will be installed. Consult your Discovery Sport manual for exact positioning if needed. Clean the surface thoroughly with a lint-free cloth and isopropyl alcohol. Allow to dry completely (2–3 minutes). Carefully peel back the 3M adhesive backing, starting from one corner of the trim piece. Align the trim with the seat area and press firmly into place, working from center outward to eliminate air bubbles. Allow 24 hours for the adhesive to fully cure before driving or adjusting seats. Note: Ensure the surface is completely dry and free of dust or residue before application. The 3M adhesive is permanent and cannot be repositioned once fully pressed. Test fit without removing the backing first if uncertain about placement. Ready to Elevate Your Discovery Sport? Transform your interior with genuine carbon fiber styling. This premium trim piece delivers motorsport aesthetics without compromise—backed by our 30-day money-back guarantee and worldwide shipping. Shop Discovery Sport Upgrades Apply code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any parent company. All vehicle names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for compatibility with the specified vehicle(s) and is sold as-is. Vehicle compatibility should be verified before purchase. Installation at owner's risk.

BMW · 5 Series G30 · Exhaust Trim BMW 5 Series G30 Chrome Exhaust Tailpipe Trim (2016–2023) Premium stainless steel muffler covers that deliver a quad-pipe aesthetic with factory-quality finishes and effortless installation. G30 2016–2023 Stainless Steel Chrome Finish Exhaust Styling Overview The BMW 5 Series G30 is a refined executive saloon that rewards tasteful enhancement. This chrome exhaust trim kit elevates the rear end with a purposeful quad-pipe look, transforming the factory tailpipe openings into a visually commanding detail that catches light and draws the eye. Engineered from premium stainless steel with either a shiny silver or high-gloss black finish, these covers are designed to withstand harsh weather, road salt, and continuous exposure without fading or corroding. The ISO9001-certified construction ensures durability and peace of mind across years of use. Installation is straightforward—included automotive-grade adhesive tape handles all the work. Heat the tape slightly before application for optimal adhesion, position the covers over your existing tailpipes, and you're done. No tools. No drilling. No permanent modification. Your 5 Series transforms in under 10 minutes. What's Included 🔧 2x Chrome Tailpipe Covers Stainless steel quad-pipe trim 🖇️ Automotive Adhesive Tape Premium application system 📋 Installation Guide Step-by-step instructions ✔️ 30-Day Money-Back Guarantee Full refund, no questions Product Highlights Dual finishes: shiny silver or high-gloss black to match your aesthetic Quad-pipe design transforms the rear-end appearance with visual impact Premium stainless steel construction resists rust, salt, and weathering ISO9001 certified manufacturing for consistent quality and durability Includes automotive-grade adhesive tape for secure, permanent fit Zero drilling or permanent modification to your vehicle Compact dimensions: 22cm length × 15cm width, 316g per cover Heat-activation adhesive for optimal surface bonding Protects existing exhaust openings from dirt and debris Reversible installation—remove without residue if needed Compatibility BMW 5 Series Model Year Range Fit 5 Series G30 2016–2023 Direct Fit 5 Series G31 Touring 2017–2024 Verify First M550i / M550d 2016–2023 Direct Fit Earlier 5 Series (F10/F11) 2010–2016 Not Compatible Installation Difficulty: Easy | Time: 10 minutes Clean the rear bumper and tailpipe openings with a dry cloth, removing dust and debris. Gently warm the adhesive tape using a hair dryer or heat gun for 15–20 seconds to activate the adhesive. Align the first chrome cover over the driver-side exhaust opening and press firmly for 10 seconds. Repeat for the passenger-side cover, ensuring both are level and symmetrical. Allow adhesive to cure for 24 hours before driving or washing the vehicle. For removal: gently peel from one corner and use adhesive remover if needed—no damage to paint. Note: Ensure the rear bumper surface is clean and dry before application. Heat the adhesive tape slightly—this activates the bonding agent and ensures a permanent, lasting fit. Why Choose Victorious We specialise in premium automotive styling. Every product is tested for durability, fit, and finish before it reaches you. Our 30-day money-back guarantee and 4.9-star customer rating (12,300+ verified reviews) reflect our commitment to quality and your satisfaction. Transform Your 5 Series Today Elevate your BMW with this factory-quality exhaust trim. Premium stainless steel, effortless installation, and a quad-pipe aesthetic that speaks for itself. Shop Chrome Exhaust Trim Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money-Back ✓ Worldwide Shipping ✓ 4.9/5 Verified Reviews ✓ Expert Support Mon–Fri Questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm GMT) Victorious Automotive is not affiliated with, endorsed by, or an official partner of BMW AG, Bayerische Motoren Werke, or any subsidiary. BMW is a registered trademark of BMW AG. This product is an aftermarket accessory designed for compatibility with the 5 Series G30 and does not modify, alter, or affect the vehicle's emissions, safety systems, or factory warranty. Installation is the responsibility of the buyer. Always consult your vehicle's manual and local laws before installation. Victorious Automotive accepts no liability for improper installation or use.

Victorious · Mercedes-Benz · Exhaust Trim Glossy Black Stainless Steel Exhaust Muffler Trim for Mercedes GLA X156 Elevate your GLA's rear end with premium gloss black stainless steel exhaust trim—no drilling, adhesive installation. GLA X156 2013–2019 Stainless Steel Glossy Black Exhaust Trim Adhesive Install Overview Your Mercedes-Benz GLA Class X156 deserves a rear end that matches its understated elegance. This Glossy Black Stainless Steel Exhaust Muffler Trim transforms the rear bumper area with a dynamic, high-end finish—the kind you'd find on premium models. Crafted from premium stainless steel and finished in deep gloss black, it catches light beautifully and demands attention. Installation couldn't be simpler. Using advanced adhesive technology, this trim pairs arrive ready to bond directly to your existing exhaust—no drilling, no permanent modifications. Heat the adhesive for optimal grip, apply, and you're done. The sleek design protects your original exhaust while adding visual depth and sophistication to your vehicle's profile. Perfect for owners who understand that details matter. This is a straightforward, reversible upgrade that delivers premium-level impact without the premium-level hassle. What's Included ⚙️ Muffler Trim Pair Left and right gloss black stainless trim 🧴 Premium Adhesive High-strength bonding solution included 📖 Installation Guide Step-by-step instructions with heat activation notes Product Highlights Premium stainless steel construction for durability Deep gloss black finish—no chrome, pure attitude Direct fit design for GLA X156 (2013–2019) Adhesive installation—zero drilling required Protects original exhaust from wear Heat-activated adhesive for optimal bonding Reversible—remove cleanly if needed Pair installation—both sides included Professional finish elevates rear appearance Lightweight, weather-resistant material Compatibility Mercedes Model Generation Years Fit GLA Class X156 (1st Gen) 2013–2019 Direct Fit GLA Class H247 (2nd Gen) 2020+ Not Compatible GLC Class C253 2015+ Not Compatible GLE Class W167 2020+ Not Compatible Installation Notes Difficulty: Easy | Time: 15–20 minutes Clean the exhaust area. Use a microfiber cloth and mild soap to remove dirt, grease, and residue. Ensure the surface is completely dry. Heat the adhesive. Apply gentle heat (using a heat gun on low setting, 30–40°C) to the adhesive backing for 2–3 minutes until it becomes tacky. Position the trim. Carefully align the left trim first, centering it over your exhaust outlet. Press firmly for 10–15 seconds. Repeat for the right side. Install the right trim using the same method, ensuring both trims sit symmetrically. Allow to cure. Let the adhesive set for a full 24 hours before driving. Avoid washing your vehicle during this period. Check alignment. Once cured, ensure both trims sit flush and evenly spaced. Minor adjustments can be made by gently lifting and repositioning if needed (within the first 2 hours). Important: Do not expose the vehicle to extreme heat or heavy water pressure for 48 hours after installation. This allows the adhesive to fully cure and bond permanently. Ready to Finish Your GLA? Upgrade your Mercedes GLA X156 with the premium gloss black exhaust trim that delivers real presence. Easy install, permanent impact. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ 4.9/5 stars — 12,300+ verified reviews ✓ +44 203 943 9919 — Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or any official Mercedes brand entity. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket fitment only.

Victorious · Mercedes S-Class · Exterior Trim Glossy Black Steel Chrome Exhaust Muffler Pipe Cover Trim for Mercedes Benz S-Class Transform your S-Class rear profile with premium stainless steel exhaust trim that delivers dynamic styling and lasting durability. Mercedes S-Class 2010–2017 Stainless Steel Glossy Black Finish Quad Exhaust Look Overview Built for the discerning Mercedes S-Class owner, this Glossy Black Steel Chrome Exhaust Muffler Pipe Cover Trim elevates your sedan's rear-end aesthetics with a contemporary quad-exhaust appearance. Compatible with S-Class models from 2010–2017, this precision-engineered accent piece adds visual depth and presence to your vehicle's exhaust area—transforming an understated detail into a signature styling element. Engineered from premium stainless steel, this trim resists corrosion, heat stress, and weathering. The striking glossy black finish contrasts beautifully against chrome accents, creating a modern, aggressive look that speaks to your attention to detail. Installation is straightforward using automotive-grade adhesive tape, ensuring a secure, permanent bond without drilling or fasteners. Whether you're upgrading a well-maintained W221 platform or refreshing your S-Class's exterior presence, this exhaust trim delivers professional-grade results that rival dealership alternatives—at a fraction of the cost. What's Included 📦 Exhaust Pipe Cover Trim Glossy black stainless steel, pre-formed for perfect fit 🔧 Automotive Adhesive Tape High-strength, weather-resistant bonding strips Product Highlights Premium stainless steel construction resists corrosion and heat damage Glossy black finish creates striking contrast with chrome elements Quad-exhaust visual effect enhances rear profile instantly Precise fitment engineered for 2010–2017 S-Class models Lightweight design (300g) eliminates handling impact Includes professional-grade automotive adhesive tape ISO 9001 tested for quality assurance and durability No drilling, fasteners, or modifications required Quick installation—completes in under 30 minutes Maintains factory aesthetics while elevating visual presence Compatibility & Fitment S-Class Generation Year Range Fitment Status W221 (Long Wheelbase) 2010–2017 Direct Fit W221 (Standard Wheelbase) 2010–2017 Direct Fit Earlier S-Class (W220) Before 2010 Not Compatible Newer S-Class (W222) 2018+ Not Compatible Always verify your specific model year and configuration before ordering. Contact our sales team at +44 203 943 9919 (Mon–Fri, 9am–7pm) if you're unsure about fitment. Installation Notes Installation Difficulty: Beginner | Time: 20–30 minutes Park your S-Class on a level surface and allow the exhaust system to cool completely (minimum 2 hours after driving). Clean the exhaust pipe area thoroughly with a microfiber cloth and mild degreaser. Dry completely. Gently remove the protective backing from the automotive adhesive tape strips. Align the trim piece carefully with your exhaust pipe opening, ensuring symmetrical positioning. Press firmly and evenly across the entire surface for 15–20 seconds to activate the adhesive bond. Allow 24 hours for full cure before washing or exposing the vehicle to heavy rain. Important: Pre-heat the adhesive tape with a heat gun (low setting, 30–60 seconds) before application to ensure maximum grip, especially in cold climates. Do not apply during rain or high humidity. Ready to Upgrade Your S-Class? Elevate your Mercedes S-Class with premium exhaust trim that transforms the rear profile. Add this to your cart today and discover why thousands of luxury car owners trust Victorious Automotive for expert-grade styling upgrades. Add to Cart Use code 22GET20 for 20% off when you buy any 2 items. ✓ 30-Day Money Back ✓ Worldwide Shipping ✓ 4.9/5 Stars (12,300+ Reviews) ✓ Expert Support +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes brand entity. All vehicle references are used solely for fitment and compatibility purposes. Product names and specifications are provided by the manufacturer. Always verify compatibility with your specific vehicle before purchase.

BMW · X3/X4 G01 · Exhaust Trim Glossy Black Exhaust Muffler Pipe Tail Trim for BMW X3/X4 G01 (2018–2019) Transform your BMW's rear end with premium stainless steel styling that captures the aggressive luxury aesthetic of high-spec models. G01 2018–2019 Stainless Steel Glossy Black Finish Quad Design Direct Fit Overview Your BMW X3 or X4 G01 deserves rear styling that matches its modern architecture. This Glossy Black Exhaust Muffler Pipe Tail Trim elevates the visual presence of your vehicle with a sleek, premium appearance reminiscent of factory M-Sport and high-end trim levels. Whether you're running a standard model or already upgraded elsewhere, this finishing touch commands attention at every angle. Engineered from premium stainless steel with a high-gloss black finish, this trim features a dynamic quad-look design that adds visual depth and sportiness to your rear bumper. The construction is built to resist corrosion, UV fading, and the elements—meaning this investment maintains its finish year after year without compromise. Installation is straightforward using automotive-grade adhesive tape, securing directly to your existing exhaust tips. No drilling, no permanent modification, no dealer markup. Backed by ISO9001 certification, this is engineered styling for the discerning enthusiast. What's Included ✦ Exhaust Tail Trim Glossy black stainless steel quad design 🔌 Adhesive Tape Kit Pre-cut automotive-grade mounting tape Product Highlights Premium stainless steel construction resists corrosion and maintains finish High-gloss black finish with exceptional UV and weather resistance Quad-look design adds sportiness and modern aggression to rear profile ISO9001 certified manufacturing for uncompromising quality Adhesive tape installation—no drilling or permanent modifications required Lightweight design (300g) causes zero handling or performance impact Direct fit for BMW X3/X4 G01 without adapter or modification Factory-matched dimensions (23cm × 14cm × 6cm) for seamless integration Creates premium appearance without dealership cost Reversible installation with no residue if removal becomes necessary Compatibility Model Year Fitment BMW X3 G01 2018–2019 Direct Fit BMW X4 G01 2018–2019 Direct Fit BMW X3 (Pre–G01) 2011–2017 Not Compatible BMW X4 (Pre–G01) 2014–2017 Not Compatible Installation Notes Difficulty: Beginner | Time: 10–15 Minutes Clean the rear bumper and exhaust tip surfaces with rubbing alcohol. Allow 5 minutes to dry completely. Gently heat the adhesive tape backing with a lighter for 3–5 seconds to activate bonding strength. Carefully position the trim onto the exhaust tip, ensuring alignment with your vehicle's existing lines. Press firmly across the entire surface for 10–15 seconds, paying extra attention to the edges. Allow 24 hours for full adhesive cure before highway driving or car washes. Pro Tip: For optimal adhesion in cold weather, warm your exhaust tips by running the engine for 2 minutes before installation. This ensures the surface temperature activates the tape's full grip potential. Ready to Upgrade Your Rear End? Glossy Black Exhaust Tail Trim for BMW X3/X4 G01 gives you M-Sport presence without the M-Sport price tag. Premium stainless steel. Flawless finish. Direct fit installation. Order today and transform your BMW's visual impact. Shop Now Use code 22GET20 to save 20% when purchasing any 2 items. ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 Support: +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW brand entities. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed as a non-structural cosmetic enhancement and does not alter vehicle function or performance.

Premium Automotive · BMW X3/X4 · Exterior Trim BMW X3/X4 G01 (2018–2019) Stainless Steel Exhaust Muffler Trim Premium chromium styling that elevates your X3 or X4's rear-end presence with refined German engineering. G01 2018–2019 Stainless Steel Chromium Styling Direct Fit Overview The BMW X3 and X4 G01 generation (2018–2019) represents a significant step forward in luxury compact SUV design. These models demand accessories that match their precision engineering and premium aesthetic. This exhaust muffler trim kit has been engineered specifically to complement the factory rear styling while adding a layer of refined visual depth. Manufactured from premium stainless steel with a polished chromium finish, this trim piece transforms the exhaust outlet area into a statement of understated elegance. The silvery finish contrasts beautifully against the rear bumper, creating visual interest without appearing aftermarket or heavy-handed. For owners seeking OEM-quality enhancements, this is a thoughtfully executed choice. The installation process is straightforward, using high-grade automotive adhesive tape engineered for long-term durability in all weather conditions. Whether you're preparing your X3 or X4 for resale, daily driving, or simply refining the details that matter, this trim delivers the kind of incremental quality refinement that distinguishes truly cared-for vehicles from the rest. What's Included ✦ Exhaust Muffler Trim Pieces 2x stainless steel trim pieces ✓ Adhesive Tape Professional-grade automotive bonding 📋 Installation Guide Step-by-step instructions included 🛡 30-Day Guarantee Full money-back if not satisfied Product Highlights Premium stainless steel construction resists oxidation and corrosion for years Polished chromium finish adds sophisticated visual depth to rear styling Engineered for 2018–2019 BMW X3 G01 and X4 G01 models Factory-matched fitment with zero modifications required ISO9001 certified manufacturing quality standards Quick installation using professional automotive adhesive tape Lightweight at 300g — no stress on factory mounts or fasteners Weather-resistant finish maintains appearance in all climate conditions Non-destructive installation preserves factory paint and finish Complements both M Sport and standard X3/X4 rear bumper designs Compatibility Model Year Status BMW X3 G01 2018–2019 Direct Fit BMW X4 G01 2018–2019 Direct Fit BMW X3 G01 2020+ Not Compatible BMW X4 G01 2020+ Not Compatible BMW X3 G02 2021+ Not Compatible Important: Verify your vehicle's model year and generation code (G01) before purchasing. Fitment is specific to 2018–2019 production runs only. Installation Notes Difficulty Level: Easy | Time Required: 15–20 minutes Clean the exhaust outlet area thoroughly with warm soapy water and allow to dry completely (minimum 30 minutes) Remove the protective backing from the adhesive tape strips Carefully position the first muffler trim piece on the driver-side exhaust outlet, ensuring alignment with the bumper edge Apply firm, even pressure across the entire surface for 10 seconds to activate the adhesive bond Repeat steps 3–4 for the passenger-side exhaust outlet trim piece Allow adhesive to cure for 24 hours before washing or driving in wet conditions Note: Professional installation is recommended for optimal positioning and durability. Poor surface preparation is the leading cause of adhesive failure — invest the extra time in cleaning. Elevate Your X3 or X4 Today Small details define the character of a truly refined vehicle. This stainless steel exhaust trim represents the kind of thoughtful enhancement that owners who care about their BMW appreciate. It's not a dramatic mod — it's a whisper of intentionality. Add to Cart Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ Worldwide Shipping via DHL, FedEx, UPS ✓ 4.9/5 Stars from 12,300+ reviews 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to BMW AG, BMW of North America, Jaguar Land Rover, or any official BMW subsidiary. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product descriptions and compatibility information are provided in good faith; always verify fitment with your vehicle's documentation or contact our support team before purchase.

BMW · X5 G05 & X7 G07 · Exhaust Trim Quad Exhaust Muffler Pipe Trim Upgrade – BMW X5 G05 & X7 G07 (2019–2023) Premium stainless steel quad exhaust trim that transforms your BMW's rear aesthetic with aggressive, high-performance styling. G05 / G07 2019–2023 Stainless Steel Quad Exhaust Easy Install ISO9001 Certified Overview The BMW X5 G05 and X7 G07 are precision-engineered luxury SUVs that command attention on any road. This quad exhaust muffler pipe trim upgrade elevates their rear profile, adding a layer of sportiness and visual aggression that rivals factory M-sport packages. Crafted from premium grade stainless steel, this two-piece trim set mirrors the exhaust architecture of higher-specification BMW models, delivering that coveted dual-quad outlet aesthetic. Whether you choose the refined shiny silver or bold high-gloss black finish, the result is an understated yet purposeful enhancement that catches light and eyes alike. Installation is straightforward thanks to included high-quality adhesive tape—no drilling, welding, or permanent modifications required. Perfect for owners who want tangible visual impact without compromise to originality. What's Included ✓ 2-Piece Exhaust Trim Set One complete quad outlet solution 🔧 High-Grade Adhesive Tape Professional-strength automotive grade 📋 Installation Instructions Step-by-step guidance included 🛡️ 30-Day Money-Back Guarantee Full refund if not satisfied Product Highlights Precision-engineered quad exhaust aesthetic for 2019–2023 X5 G05 & X7 G07 Grade-A stainless steel resists corrosion and maintains factory-fresh finish Available in shiny silver and high-gloss black—choose your statement ISO9001 certified manufacturing ensures quality and durability Adhesive tape installation—reversible, no permanent modifications Lightweight at 500g per set—zero impact on handling or performance Dimensions optimised: 35cm length × 17cm width × 5cm height Mirrors OEM M-sport styling for premium visual upgrade Heat-bond ready—improved adhesion when tape is pre-warmed Turn-key solution that elevates rear-end presence instantly Compatibility Vehicle Model Year Range Status BMW X5 G05 2019–2023 Direct Fit BMW X7 G07 2019–2023 Direct Fit BMW X5 G05 (Prior Gen) Pre-2019 Not Compatible BMW X7 G07 (Prior Gen) Pre-2019 Not Compatible Installation & Care Difficulty: Beginner | Time: 15–20 minutes Clean the rear bumper area thoroughly with mild soap and water. Allow to dry completely (15–20 minutes minimum). Lightly sand the adhesive area on the exhaust trim backing with 180–220 grit sandpaper for improved bond. Gently warm the included adhesive tape using a heat gun or hair dryer on medium setting for 10–15 seconds to improve tackiness. Carefully align the trim pieces around your exhaust outlets, ensuring both are centred and level before final adhesion. Press firmly onto the bumper for 30 seconds per piece, then allow 24 hours for full cure before exposing to moisture. For removal, gently prise up a corner and carefully peel back—residue can be cleaned with rubbing alcohol. Note: Do not apply tape to wet, dusty, or cold bumpers. Optimal adhesion occurs between 15–25°C. Avoid car washes for 48 hours post-installation. Complete Your BMW Transformation Small details define great cars. This quad exhaust trim upgrade is one such detail—understated, purposeful, and undeniably effective. Order now with confidence backed by our 30-day guarantee. Shop Exhaust Trims Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke, or any official BMW entity. All product names, logos, and trademarks are the property of their respective owners. This product is an aftermarket accessory designed for fitment to the specified vehicle models. Always verify compatibility with your vehicle's specific year and build configuration before purchase.

Victorious Automotive · Range Rover · Screen Protection TPU Screen Protector for Range Rover Vogue L405, Sport L494 & Velar (2017–2020) Precision-cut, optically clear TPU film engineered to shield your Range Rover's infotainment and driver display screens from daily scratches, smudges, and surface wear — without affecting touch sensitivity. L405 Vogue L494 Sport Velar 2017–2020 TPU HD Film Scratch Resistant Self-Healing Bubble-Free Direct Fit Overview The Range Rover Vogue L405, Sport L494, and Velar represent the pinnacle of British luxury motoring — and their large-format touchscreen interfaces are central to that experience. From the dual-screen InControl Touch Pro system on the Vogue and Sport to the beautifully integrated dual-pane display of the Velar, these screens are as much a design statement as they are a functional tool. Keeping them in immaculate condition matters. This TPU screen protector has been precision-cut to fit each compatible model's display geometry exactly — no trimming, no guesswork. Manufactured from high-grade thermoplastic polyurethane, the film absorbs micro-abrasions from daily contact, resists fingerprint adhesion, and maintains full HD optical clarity so your screen looks exactly as it did the day you drove off the forecourt. Unlike tempered glass alternatives, TPU film is flexible enough to conform to slightly curved display surfaces common on these generations, and its self-healing properties mean minor surface scuffs gradually disappear on their own. It's the kind of protection that works quietly in the background — exactly how it should be in a vehicle of this calibre. What's Included 🛡️ TPU Protection Film 1x precision-cut screen protector for your compatible model 🧴 Cleaning Wipe Pre-installation screen prep cloth included 🃏 Application Card Smooth-edge squeegee for bubble-free application 📋 Installation Guide Step-by-step instructions for a clean, accurate fit Product Highlights Precision-cut to match your model's exact screen dimensions High-grade TPU HD material with superior optical clarity Self-healing surface — minor scratches disappear over time Full touch sensitivity maintained — no dead zones or lag Anti-fingerprint and smudge-resistant coating Bubble-free adhesive for a seamless, clean installation Protects against everyday scratches, keys, and debris Flexible film conforms to lightly curved display surfaces Residue-free removal — no damage to OEM screen surface Reduces glare and reflections for improved screen visibility Compatibility Model Code Year Range Fit Range Rover Vogue L405 2018–2020 Direct Fit Range Rover Sport L494 2018–2020 Direct Fit Range Rover Velar L560 2017–2020 Direct Fit Range Rover Vogue L405 2013–2017 Verify Screen Gen Range Rover Sport L494 2013–2017 Verify Screen Gen Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure which generation your vehicle is? Check your V5C registration document or contact us at +44 203 943 9919 Mon–Fri 9am–7pm. Installation Notes ⏱ Estimated Time: 15–25 minutes  ·  Difficulty: Easy Power off your vehicle's infotainment system and allow the screen to cool to room temperature before beginning. Use the included dry cloth to remove all dust, fingerprints, and debris from the screen surface. For best results, work in a low-dust indoor environment. Peel back a small section of the TPU film's backing layer and align the film carefully to the screen edges using the cut-outs and corners as reference points. Slowly peel and lay the film across the screen, using the application card to push out any air bubbles from the centre outward in smooth, firm strokes. Remove the top protective layer once the film is fully applied. Allow 24 hours for the adhesive to fully cure before extended use. ⚠ Important: Ensure your screen surface is completely clean and dry before application. Any dust or moisture trapped beneath the film may affect adhesion. If you are unsure, professional installation is recommended for a flawless result. Protect What Matters Your Range Rover's interior is built to last — and with the right protection, its screens will stay looking factory-fresh for years to come. Shop with confidence, backed by our 30-day money-back guarantee and 4.9-star rated service. Shop Range Rover Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only. Always verify fitment with your specific vehicle before purchasing.

Victorious Automotive · Range Rover Vogue L405 · Exterior Lighting Range Rover Vogue L405 2013–2020 Rear Tail Light Aftermarket Upgrade — 2018 Facelift Style Give your pre-facelift L405 the refined rear-end aesthetic of the 2018 model year — with a precision-fit pair of aftermarket tail lights built to OEM standards. Range Rover Vogue L405 2013–2020 2018 Facelift Style Rear Tail Lights Left & Right Pair OEM Quality ISO 9001 Certified Direct Fit No Modification Required Overview The Range Rover Vogue L405 is one of Land Rover's most celebrated full-size luxury SUVs — a vehicle that commands presence on every road it travels. Introduced in 2013 and comprehensively refreshed in 2018, the L405 facelift brought with it a distinctly sharper, more sculpted rear light signature that transformed the vehicle's after-dark identity. If your Vogue is a 2013–2017 model, you'll know exactly what we're talking about. These aftermarket rear tail lights are engineered to replicate the 2018 facelift design language in precise detail — giving your earlier L405 a thoroughly modern rear appearance without any structural modification to your vehicle. Every lens, housing contour, and light element has been developed to mirror the factory facelift unit, ensuring the visual upgrade is seamless and convincing from every angle. Built to ISO 9001 certified manufacturing standards with OEM-grade materials, these lights aren't a cosmetic compromise — they're a genuine quality upgrade. Whether you're refreshing an older Vogue for personal satisfaction or preparing it for resale, this is one of the most impactful single changes you can make to the exterior of the L405. What's Included 🔴 Left Rear Tail Light Driver-side unit, 2018 facelift style housing 🔴 Right Rear Tail Light Passenger-side unit, matched facelift design 📦 Protective Packaging Individually secured for safe international transit 🔧 Fitment Hardware Mounting points align with OEM positions Product Highlights Replicates the 2018 L405 facelift rear light design in precise detail ISO 9001 certified manufacturing — quality assured at every stage OEM-grade materials ensure durability across all weather conditions Direct-fit installation — no cutting, drilling, or modification required Supplied as a matched left and right pair for consistent appearance Factory wiring connector compatibility for plug-and-play fitment UV-stabilised lens housing resists yellowing and fading over time Significantly updates the rear-end aesthetic of pre-facelift models Ideal for owners upgrading a 2013–2017 Vogue to facelift specification Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Vehicle Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 (Pre-Facelift) Direct Fit Range Rover Vogue L405 2018–2020 (Post-Facelift) Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes 🔧 Difficulty: Intermediate  |  ⏱ Estimated Time: 45–90 Minutes  |  👤 1 Person Required Open the tailgate fully and locate the interior trim panel covering the tail light mounting points on both sides of the boot aperture. Carefully remove the trim panel using a trim removal tool to expose the rear light retaining bolts and wiring connector. Disconnect the factory wiring harness connector from the existing tail light unit — press the release tab firmly before pulling. Remove the retaining bolts (typically 3 per side) and gently pull the original tail light unit away from the body aperture. Align the new facelift-style tail light unit into the aperture, ensuring all mounting studs are correctly seated before applying torque. Reconnect the wiring harness until the connector clicks firmly into place, then refit the retaining bolts and trim panel. Repeat on the opposite side, then test all light functions — stop, indicator, reverse, and running lights — before driving. ⚠ Important: Professional installation is recommended if you are unfamiliar with automotive electrical systems. Always verify that all light functions operate correctly before using the vehicle on public roads. Check local regulations regarding aftermarket lighting compliance in your region prior to installation. Upgrade Your L405 — The Right Way Join over 12,300 Range Rover owners who trust Victorious Automotive for premium, precision-engineered upgrades. Browse the full L405 collection or speak to our team directly. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only.

Victorious Automotive · Range Rover Vogue & Sport · Interior Controls Silver Left Window Control Button — Range Rover Vogue L405 & Sport L494 (2014–2017) A precision-fit matte silver window control button for the driver's left-hand switch panel — a direct, factory-style upgrade that lifts your L405 or L494 interior without compromise. L405 Vogue L494 Sport 2014–2017 Matte Silver Left Window Button Laser-Cut Plastic Peel & Stick Interior Upgrade Overview The Range Rover Vogue L405 and Sport L494 are vehicles defined by their attention to detail — and the interior switchgear is no exception. Over time, the original window control buttons can show wear, discolouration, or simply no longer reflect the level of finish you expect from a vehicle of this calibre. This silver left window control button is designed specifically to address that, restoring a clean, premium look to one of the most frequently touched surfaces in the cabin. Manufactured from high-quality laser-cut plastic in a refined matte silver finish, this button is engineered to sit flush and true against the door panel — precisely where the original sits. The matte tone has been carefully chosen to complement the factory interior trim palette found across Vogue and Sport variants produced between 2014 and 2017, delivering a cohesive, factory-plausible result rather than an aftermarket add-on aesthetic. Installation requires no specialist tools, no wiring, and no modification to your vehicle. The peel-and-stick application means the upgrade can be completed in under five minutes, making it one of the most accessible interior refinements available for these models. It's the kind of detail that's immediately noticeable to anyone who knows these vehicles — and entirely invisible to those who don't. What's Included 🪟 Left Window Control Button Matte silver, driver's side — single unit 🔲 Pre-Applied Adhesive Backing Peel-and-stick ready, no primer needed 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision laser-cut for exact fitment on L405 and L494 switch panels Matte silver finish complements factory interior trim tones Covers the left-hand window control position on the driver's door No drilling, wiring, or tools required for installation Peel-and-stick adhesive backing for a clean, residue-free fit Installs in under 5 minutes — single-person job High-quality plastic construction built for daily tactile use Restores a factory-fresh appearance to worn or faded controls Colour-consistent with silver interior trim accessories Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Velar L560 2017–2019 Direct Fit Discovery 5 L462 2017–2019 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Difficulty: Beginner  |  Estimated Time: Under 5 Minutes  |  Tools Required: None Ensure the door panel and existing window control surface are clean and dry. Use a dry microfibre cloth to remove any dust, grease, or moisture from the target area. Dry-fit the silver button over the existing control to confirm alignment before committing. It should sit flush and level with no overhang. Peel the protective backing from the adhesive layer on the underside of the button, taking care not to touch the adhesive surface. Carefully align the button over the left window control switch and press firmly for 10–15 seconds to activate the adhesive bond. Allow 30 minutes before regular use to ensure the adhesive sets fully — particularly in cold ambient temperatures. ⚠ Please Note: Verify your exact model year and door panel variant before purchasing. Some early 2013 L405 Vogue models may feature a slightly different switch panel layout. If in doubt, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Built for Range Rover Owners Who Care At Victorious Automotive, every product we stock is chosen with one standard in mind — would we fit it to our own vehicle? Browse our full Range Rover Vogue L405 and Sport L494 collections for accessories that match this level of detail. Shop Range Rover Vogue L405 → Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks are referenced solely for the purpose of product compatibility identification. Always verify fitment with your specific vehicle before purchasing.

Victorious Automotive · Range Rover Velar · Interior Trim Range Rover Door Trim Set — Silver Chrome Interior Decoration for 2018–2019 Models A precision-engineered ABS chrome door trim set that elevates the interior of your 2018–2019 Range Rover with a seamless silver finish and factory-matched fitment. 2018–2019 Models Chromium Styling ABS Material Silver Chrome Finish Door Air Vent Trim No Drilling Required CCC Certified 3kg Overview The Range Rover is one of the most considered vehicles on the road — every surface, every material choice, and every detail speaks to the owner's standards. The interior door panels are no exception. Whether you're stepping into a 2018 or 2019 model, the door trim lines are prominent, tactile, and immediately visible to every occupant in the cabin. This door trim decoration set introduces a polished silver chrome line finish across the side door surfaces, adding a layer of visual refinement that complements the Range Rover's existing design language without overwhelming it. Manufactured from durable ABS with a chromium-style coating, the trim is built to resist everyday wear, UV exposure, and the temperature swings that come with British and international climates alike. Designed specifically for 2018–2019 model year fitment, these trims align precisely with the factory door panel contours and air vent surrounds — no cutting, no modification, and no compromise on the finished result. For owners who want their interior to reflect the same attention to detail as the rest of the vehicle, this trim set is a straightforward and impactful upgrade. What's Included 🪟 Door Trim Set Full set — 1 complete kit for all door panels 📋 Installation Guide Step-by-step fitting instructions included 🔧 Adhesive Backing Pre-applied 3M-grade bonding tape for secure fit 🛡️ Protective Film Surface protection film to prevent transit scratches Product Highlights Precision-engineered for 2018–2019 Range Rover models — direct fit, no modifications needed Polished silver chrome finish adds a premium, bespoke quality to the door interior High-grade ABS construction offers durability against heat, UV, and daily use Designed to align perfectly with factory door air vent surrounds and panel lines Adhesive bonding system ensures a firm, rattle-free installation CCC certified — manufactured to recognised quality and safety standards Lightweight at 3kg — no impact on door operation or mechanism Reversible installation — can be removed cleanly without damaging original trim Compatible with both short and long wheelbase variants (verify before ordering) Immediately transforms the feel of the cabin with minimal effort or cost Compatibility Model Year Range Variant Fitment Range Rover Velar 2018–2019 Standard Wheelbase Direct Fit Range Rover Velar 2018–2019 R-Dynamic Direct Fit Range Rover Vogue L405 2018–2019 Standard Wheelbase Direct Fit Range Rover Vogue L405 2018–2019 Long Wheelbase Direct Fit Range Rover Sport L494 2018–2019 All Trims Direct Fit Range Rover Vogue L460 2022–2026 All Variants Not Compatible Range Rover Sport L461 2022–2026 All Variants Not Compatible Defender L663 2020–2026 All Variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: None Clean the target door trim surfaces thoroughly with an isopropyl alcohol wipe and allow to dry completely — this ensures maximum adhesion and a clean bond line. Dry-fit each trim piece to the door panel before committing to adhesion. Confirm alignment with the air vent surrounds and panel contours. Peel back a small section of the protective backing tape on the first trim piece and carefully position it against the door panel, working from one end to the other to avoid air bubbles. Apply firm, even pressure across the full length of each trim piece for at least 30 seconds. Use a soft cloth or trim tool to press into any contoured areas. Repeat for remaining door panels. Allow the adhesive to cure for a minimum of 24 hours before exposing the vehicle to rain or a car wash. Once all pieces are installed, inspect from multiple angles in natural light to confirm consistent alignment and finish. ⚠ Important: Please confirm your exact wheelbase and trim variant before installation. Applying adhesive trim to an incorrect panel position may affect fitment and removal. Professional installation is recommended if you are unsure of your vehicle's specific door panel configuration. Upgrade Your Range Rover Interior Today Trusted by over 12,300 Land Rover and Range Rover owners worldwide, Victorious Automotive is the go-to specialist for interior and exterior upgrades that match the standard your vehicle was built to. This door trim set ships globally via DHL, FedEx, UPS, and TNT — fully tracked and protected. Shop Range Rover Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL · FedEx · UPS · TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle variant prior to purchase.

Victorious Automotive · Range Rover L405 · Interior Protection Transparent Interior Protection Film — Range Rover L405 LWB 2018 A precisely cut, virtually invisible TPU film that shields your 2018 Range Rover's most-touched interior surfaces from daily wear, scratches, and scuffs — without compromising the factory finish. Range Rover L405 LWB 2018 TPU Film Self-Healing Transparent Interior Protection Direct Fit No Residue Overview The 2018 Range Rover L405 Long Wheelbase is a vehicle built to the highest standard — a cabin defined by refined surfaces, tactile controls, and premium detailing that rewards those who appreciate the finer points of automotive design. Every switch, trim panel, and door handle has been considered. Keeping them in that condition, day after day, is where this film comes in. This transparent interior protection film is custom-cut to fit the specific contours of the 2018 Range Rover L405 LWB, covering the highest-contact zones: centre console, gear surround, air panel, door handles, knobs, gear panel, door interior trim, and air outlets. The ultra-clear TPU construction remains virtually invisible once applied, preserving the factory appearance while providing a robust barrier against fingernail marks, ring scratches, and general handling wear. Unlike generic cut-to-fit films, this kit is precision-engineered for your exact model year and body configuration. The self-healing TPU layer absorbs minor surface abrasions over time, recovering its clarity with gentle heat. No adhesive residue. No lifted edges. No compromise to the interior you've invested in. What's Included 🎛️ Centre Console Film Covers the full centre console surface ⚙️ Gear Surround Film Precision cut for the gear selector area 💨 Air Panel Film Protects climate control and vent trim 🧩 Suite Kit Film Full suite trim panel coverage 🔘 Knob Protection Film Fits rotary and push-type knob surrounds 🚪 Door Handle Film Shields interior door pull handles 📐 Gear Panel Film Covers the gear panel trim surround 🛡️ Door Interior Film Protects door card trim panels 🌬️ Outlet Film Covers air outlet surrounds and bezels 🧰 Installation Toolkit Includes scraper tool and cleaning cloth Product Highlights Ultra-clear TPU material maintains factory interior appearance with zero visual distortion Self-healing surface layer repairs light scratches and scuffs with ambient or applied heat Precision die-cut for the 2018 Range Rover L405 LWB — no trimming required Covers 9 high-contact interior zones in a single comprehensive kit Pressure-sensitive adhesive leaves zero residue on removal Resistant to UV discolouration — stays optically clear over time Protects against fingernail marks, key scratches, and ring abrasions Flexible TPU conforms to curved and textured surfaces without bubbling Compatible with factory gloss, satin, and piano black interior trims Installation toolkit included — no specialist tools or dealership visit required Compatibility Vehicle Code Year Range Fit Range Rover Vogue LWB L405 2018 Direct Fit Range Rover Vogue SWB L405 2018 Verify Before Purchase Range Rover Vogue L405 L405 2013–2017 Not Compatible Range Rover Vogue L405 L405 2019–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover L460 L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 45–75 minutes  ·  Tools: Included in kit Thoroughly clean all target surfaces using the included microfibre cloth. Remove any dust, oils, or residues that could affect adhesion. Allow surfaces to dry completely. Work in a dry, temperature-controlled environment — ideally between 15°C and 25°C. Avoid installation in cold, damp, or humid conditions. Identify each film piece against the corresponding surface before peeling. The kit is labelled by placement zone for easy reference. Peel back a small section of the backing film and align the TPU piece precisely against the panel edge. Work slowly from one end to the other, pressing down firmly with the included scraper as you go. Use the scraper tool to smooth out any air bubbles toward the nearest edge. For tight curves, gentle finger pressure works alongside the scraper. Once all pieces are applied, press all edges firmly for 30–60 seconds to ensure full adhesion, paying particular attention to corners and cut-outs. Allow a minimum of 48 hours before cleaning the vehicle interior. Avoid any chemical cleaners or solvent-based products on or near the film. ⚠ Important: Do not install during rain, snow, or freezing temperatures. Avoid washing the vehicle interior or applying any cleaning products for 48 hours post-installation. Never use chemical agents, alcohol, or solvent cleaners directly on the protective film — warm water and a soft cloth are sufficient for ongoing maintenance. Protect Your Range Rover's Interior — For Good The 2018 Range Rover L405 deserves to look exactly as it did the day you took delivery. This film kit is one of the simplest, most effective ways to ensure it does — for years to come. Explore our full Range Rover L405 accessories collection to complete your build. Shop Range Rover L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx & UPS ↩️ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Velar · Interior Protection Full Protection Transparent TPU Protective Film — Range Rover Velar 2017 2018 2019 Crystal-clear, precision-cut TPU film engineered specifically for the Range Rover Velar — keeping every interior surface pristine with zero compromise to the cabin's signature aesthetic. Range Rover Velar 2017–2019 TPU HD Clear Film Direct Fit Scratch Protection Left Hand Drive Self-Healing Material Residue-Free Removal Overview The Range Rover Velar is one of Land Rover's most design-forward vehicles — a cabin defined by its layered Touch Pro Duo infotainment system, piano-black surfaces, and tactile premium materials. It's a space that demands as much care as it inspires admiration. Daily use, keys, rings, fingernails, and even regular cleaning can quietly erode those surfaces over time, dulling the finish long before it should. This full-protection transparent TPU film is cut specifically to the Velar's interior geometry, covering the most vulnerable touchpoints — centre console surrounds, door sill trim, infotainment bezels, dashboard sections, and control panels. The film bonds flush to the surface with no air bubbles, no visible edges, and no alteration to the look or feel of the interior. Optically, it's as if nothing is there — until you peel it back after years of use and see the untouched original finish beneath. Made from high-grade thermoplastic polyurethane (TPU), the material is both flexible enough to conform to complex curves and tough enough to absorb the kind of daily contact that causes micro-scratches and surface dulling. It's an invisible layer of confidence — and far less expensive than a trim replacement or full interior refurbishment down the line. What's Included 🛡️ Centre Console Film Set Pre-cut panels for the main console surround and control area 📱 Infotainment Bezel Film Covers Touch Pro Duo surrounds and display frame edges 🚪 Door Sill Protection Strips High-contact entry points prone to scuffing and scratching 🎛️ Dashboard Trim Film Precision sections for dashboard trim panels and surrounds 🧽 Cleaning Cloth & Squeegee Surface prep and application tools included in the kit 📋 Application Guide Step-by-step printed instructions for a bubble-free fit Product Highlights High-definition TPU film — optically transparent with zero colour shift Precision die-cut to exact Velar interior dimensions Protects against scratches, scuffs, and everyday surface contact Self-healing surface resists minor abrasions automatically Adhesive leaves zero residue upon removal Maintains original cabin look — completely invisible once applied Reduces need for frequent polishing and interior detailing UV-resistant formula prevents yellowing over time Compatible with 2017, 2018, and 2019 Velar model years Designed for left-hand drive (LHD) configurations only Compatibility Vehicle Year Drive Configuration Fit Range Rover Velar 2017 Left Hand Drive (LHD) Direct Fit Range Rover Velar 2018 Left Hand Drive (LHD) Direct Fit Range Rover Velar 2019 Left Hand Drive (LHD) Direct Fit Range Rover Velar 2020 Left Hand Drive (LHD) Direct Fit Range Rover Velar 2017–2020 Right Hand Drive (RHD) Not Compatible Range Rover Vogue / Sport / Defender All Years Any Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 30–60 Minutes Thoroughly clean all target surfaces using the included microfibre cloth. Remove any dust, fingerprints, or residue — a clean surface is essential for a bubble-free bond. Lightly mist the surface and the adhesive side of the film with the provided application solution (or a 90% water / 10% isopropyl alcohol mix) to allow repositioning. Carefully peel the backing liner from the film section, handling only by the edges to avoid contaminating the adhesive. Align the film to the trim panel carefully before pressing — the solution gives you time to adjust position before committing. Use the included squeegee to press outward from the centre, pushing out moisture and any air pockets toward the edges. Allow 24 hours for the adhesive to fully cure before wiping or applying pressure to the film surface. ⚠️ Important: This kit is designed for left-hand drive Range Rover Velar models only. Do not attempt to apply to right-hand drive vehicles — panel geometry differs and the film sections will not align correctly. Always confirm your model year before installation. Protect What You've Invested In Your Velar's interior is part of what makes it exceptional. This film keeps it that way — silently, invisibly, and indefinitely. Browse the full Range Rover Velar collection or contact our team if you need guidance on compatibility. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model references, and trademarks are the property of their respective owners and are used solely for the purpose of product compatibility identification.

BMW · X5 / X6 E70/E71 · Interior Trim BMW X5/X6 E70/E71 Carbon Fiber Style Interior Trim Frame Cover Sticker Elevate your cabin with premium carbon fiber aesthetics and effortless adhesive installation. E70 / E71 2008–2013 Carbon Fiber ABS Pre-Adhesive Plug & Play Overview For BMW X5 (E70) and X6 (E71) owners, interior detail matters. This carbon fiber style trim transforms your cabin with a contemporary, premium finish that rivals OEM upgrades—without the price tag or permanent modifications. Precision-engineered in high-grade ABS plastic with a realistic carbon weave texture, this interior molding strip applies directly to existing trim panels. Pre-applied adhesive eliminates the mess and guesswork of loose tape. Installation takes minutes, and removal leaves no residue if you ever want to revert. Whether refreshing an aging cabin or personalising a newly acquired example, this trim captures the modern aesthetic that late-model BMW owners demand. Durable, lightweight, and designed specifically for E70/E71 geometry—no universal fitment compromises here. What's Included 🎨 Carbon Fiber Trim Strip Pre-adhesive ABS molding, direct fit 🧼 Alcohol Prep Wipe Surface prep for optimal adhesion 📋 Fitment Guide Step-by-step installation diagram ✓ Quality Assurance Tested for E70/E71 fit and finish Product Highlights Realistic carbon fiber weave texture — not flat, not cheap-looking E70/E71-specific design — engineered for exact panel geometry Pre-applied double-sided adhesive — no loose tape, no mess High-grade ABS material — rigid, impact-resistant, long-lasting Lightweight construction — adds zero weight to your cabin UV-stable finish — resists fading in direct sunlight Clean removal option — reusable adhesive doesn't damage trim Modern aesthetic — transforms dated interiors instantly 2008–2013 coverage — complete E-generation compatibility Pair with other upgrades — complements steering wheel trim, door handles Compatibility & Fitment Model Generation Year Range Fitment BMW X5 E70 2008–2013 Direct Fit BMW X6 E71 2008–2013 Direct Fit BMW X5 F15 2014+ Not Compatible BMW X6 F16 2014+ Not Compatible Installation Notes Difficulty Level: Easy • Time Required: 10–15 minutes Prepare the surface: Clean the target trim panel with the included alcohol wipe. Allow to dry completely (2–3 minutes). Remove any loose dust or debris. Test fit: Dry-fit the carbon fiber trim to confirm position and alignment with surrounding panels. Peel backing: Carefully peel the white backing from the pre-applied adhesive. Work slowly to avoid creasing. Apply with pressure: Press the trim firmly onto the cleaned surface, starting from one end and working to the opposite end. Use medium, even pressure across the entire strip. Set for 24 hours: Do not disturb the trim for at least 24 hours, allowing the adhesive to cure fully. Final inspection: Check all edges for proper seating. Trim any excess with a sharp hobby knife if needed. ⚠️ Important: Ensure your cabin temperature is between 15–25°C during installation. Cold surfaces reduce adhesive effectiveness. Do not apply over existing protective film or wax-treated surfaces. Ready to Upgrade Your X5/X6 Interior? Transform your E70/E71 cabin with modern carbon fiber styling. Premium finish, effortless installation, and backed by our 30-day money-back guarantee. Shop Carbon Fiber Trim Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS 📞 Expert support: +44 203 943 9919 ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with BMW AG, Bayerische Motoren Werke, or any official BMW subsidiary. All product names and vehicle designations are used for compatibility and reference only. BMW is a registered trademark of its respective owner.

Victorious · Range Rover Sport L494 · Interior Trim Carbon Fiber Style Rear AC Outlet Trim for 2014–2017 Range Rover Sport Elevate your cabin aesthetic with precision-engineered carbon fiber trim that clips effortlessly into place. L494 2014–2017 Carbon TPU SVR-Inspired Clip-On Install Overview The Range Rover Sport (2014–2017) demands interior refinement that matches its commanding presence. Your rear climate control zone deserves the same premium finish as the rest of your cabin—and this Carbon Fibre Style Rear AC Outlet Facia delivers exactly that. Part of Victorious Automotive's exclusive carbon interior package, this trim piece transforms a utilitarian area into a statement of design intent. Engineered in high-quality Carbon TPU and finished with authentic carbon weave styling, this facia pairs visual impact with durability. No tools required, no permanent modifications: simply clip over your existing outlet cover and instantly achieve the sophisticated, modern look that defines the SVR line. Every detail matters when you own a Range Rover Sport, and this one proves it. Precision laser-cut for a perfect fit across the 2014–2017 generation, this interior upgrade sits alongside suspension refinements, wheel upgrades, and exterior carbon packages as a way to express ownership that goes beyond factory specifications. What's Included 📦 Carbon Fibre Rear AC Outlet Facia High-quality Carbon TPU construction ✓ Ready to Install No tools or adhesive needed 🎯 Perfect Fit Guaranteed Laser-cut for L494 precision Product Highlights Authentic carbon fiber weave finish for premium SVR aesthetics High-quality Carbon TPU material resists fading and UV damage Effortless clip-on installation—no drilling, adhesive, or tools Precision laser-cut for perfect fitment on all 2014–2017 models Designed to work seamlessly with existing cabin geometry Lightweight yet durable for years of daily use Complements carbon fiber exterior and interior packages Professional finish elevates perceived cabin quality instantly Non-permanent modification preserves resale value options Part of Victorious' complete carbon interior ecosystem Compatibility Model Year Range Compatibility Range Rover Sport 2014–2017 (L494) Direct Fit Range Rover Sport 2018–2020 (L494 Facelift) Not Compatible Range Rover Sport 2022–2026 (L461) Not Compatible Range Rover Vogue All Models Not Compatible Range Rover Evoque All Models Not Compatible Compatibility Note: This trim is engineered exclusively for the 2014–2017 Range Rover Sport (L494). Verify your model year before purchase. Fitment on facelift or next-generation models requires different trim variants. Installation Notes Difficulty Level: Beginner | Time Required: 5–10 minutes Open the rear interior door panel and locate the existing AC outlet cover trim. Gently pry away the factory plastic facia using a soft tool to avoid scratches. Clean the mounting clips and contact surfaces with a dry, lint-free cloth. Align the carbon fiber facia with the outlet housing, ensuring all clip points engage. Press firmly and evenly until you feel the trim lock into place with a satisfying click. Verify fitment from multiple angles and test that air flow remains unobstructed. Installation Tip: Take your time with clip alignment on first installation. If any clip resists, gently lift and reposition rather than forcing. All clips should engage without excessive pressure. If you're uncomfortable removing trim, consult a Range Rover specialist. Complete Your Carbon Interior This rear AC outlet facia is part of a larger vision: a cabin that reflects your commitment to premium design and authentic materials. Pair it with our carbon fiber steering wheel trim, door panel accents, and gear surround to achieve a cohesive, factory-quality interior evolution. Shop Range Rover Sport Interior Trim Use code 22GET20 for 20% off when you buy any 2 interior items. 4.9/5 rated by 12,300+ verified owners Worldwide shipping via DHL, FedEx, UPS, TNT 30-day money-back guarantee Mon–Fri 9am–7pm: +44 203 943 9919 Victorious Automotive is an independent specialist in Land Rover and Range Rover accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover plc, Land Rover, or Range Rover. All vehicle names and trademarks are the property of their respective manufacturers. This product is designed for aftermarket customization and modification only. Installation may affect warranty coverage—consult your retailer before proceeding.

```html Victorious · Mercedes GLA · Exhausts Chrome Exhaust Muffler Cover for Mercedes-Benz GLA Class X156 (2014–2020) Premium stainless-steel muffler cover that elevates your GLA's rear styling with a sophisticated chrome finish. X156 2014–2020 Stainless Steel Chrome & Black No Drilling Overview The Mercedes-Benz GLA Class X156 is a sophisticated compact SUV that commands presence on every road. Our chrome exhaust muffler cover is engineered to enhance that visual impact by transforming the rear profile with premium-grade styling. Crafted from high-quality stainless steel, this muffler pipe cover delivers a luxury finish that complements the GLA's modern design language. Available in polished chrome or high-gloss black, the cover catches light and draws the eye exactly where it should—your vehicle's bold rear end. Installation is straightforward and non-invasive: our advanced adhesive tape system requires no drilling, cutting, or permanent modifications. The bond is durable, weather-resistant, and reversible if you ever wish to remove it. What's Included 📦 1 Pair of Muffler Covers Stainless steel, pre-finished 🔧 High-Grade Adhesive Tape Professional automotive spec 📋 Installation Guide Step-by-step instructions included Product Highlights Stainless steel construction resists rust and corrosion Available in chrome or high-gloss black finish No drilling, cutting, or vehicle modification required Professional-grade adhesive tape for secure, long-term hold Easy installation in under 15 minutes Weather-resistant and UV-stable coating Direct fit for X156 models (2014–2020) Transforms rear styling without compromising function Reversible installation—remove anytime without residue Heat activation improves adhesion and durability Compatibility Model Year Range Fit Mercedes-Benz GLA Class 2014–2020 (X156) Direct Fit Mercedes-Benz GLA Class 2021+ (X157 / H247) Not Compatible Other Mercedes models All years Not Compatible Installation Difficulty: Easy | Time: 10–15 minutes Prepare the surface: Clean both the muffler pipes and the rear of the cover with soap and water. Dry completely with a soft cloth. Position the cover: Align the muffler cover over the exhaust pipe outlet, ensuring a flush, centered fit. Apply adhesive: Peel back the tape backing and press the cover firmly onto the muffler. Apply even pressure across the entire surface for 30 seconds. Heat activation (recommended): Use a heat gun or hair dryer on medium setting, warming the adhesive for 1–2 minutes. This dramatically improves long-term bond strength. Cure time: Allow 24 hours before exposing the vehicle to moisture or high temperatures. Final check: Inspect all edges and ensure the cover is secure. No gaps should be visible. Important: Apply heat to the adhesive for optimal adhesion and durability. Ensure the muffler is completely cool before installation. Do not apply in temperatures below 10°C or above 35°C. Elevate Your GLA's Presence Premium chrome styling meets practical installation. Our exhaust muffler cover transforms your Mercedes-Benz GLA's rear end with zero compromise—no drilling, no hassle, just a sharper, more refined look. Shop Exhaust Covers Save 20% on any 2 items with code 22GET20 4.9/5 stars from 12,300+ reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS Support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler AG, or any official Mercedes distributor. All product names and trademarks remain the property of their respective owners. This product is an aftermarket accessory designed for fitment; fitment and performance may vary by vehicle condition and installation quality. ```

Audi · A6/A7 C7 · Exhaust Styling Stainless Steel Chrome Exhaust Pipe Cover – Audi A6 A7 C7 2016–2018 Premium dual-pipe exhaust trim that elevates your A6/A7 rear end with polished stainless steel styling and simple adhesive installation. Audi A6 C7 Audi A7 C7 2016–2018 Stainless Steel No Drilling Pair Included Overview The Audi A6 and A7 (C7) command attention on the road—and your exhaust detail should too. This dual stainless steel chrome pipe cover transforms the rear bumper zone into a sharp, purposeful focal point that mirrors the sportier S and RS trim packages. Precision-engineered from heavy-gauge stainless steel, these covers arrive as a matched pair and install in minutes using included premium-grade adhesive tape. No drilling, no modifications, no compromise. The high-gloss chrome finish resists oxidation and maintains its shine across seasons, while the alternative matte black option offers a darker, more understated aesthetic. Whether you're refining a stock A6 or adding visual depth to an already-tuned sedan, these pipe covers deliver immediate curb presence and long-term durability that matches the quality of your Audi engineering. What's Included 📦 Dual Pipe Covers Left and right stainless steel trim pieces 🔧 Premium Adhesive Tape High-strength 3M-grade bond strips included 📖 Fitment Guide Clear positioning and prep instructions ✨ Two Finish Options Chrome or high-gloss black finishes Product Highlights Heavy-gauge stainless steel construction resists rust and oxidation Dual-pipe styling mimics sportier S / RS trim appearance Available in polished chrome or matte black finish Sold as a pair – left and right covers included Precision fit for A6 and A7 C7 2016–2018 model years Adhesive installation – no drilling or permanent modification Premium-grade 3M tape ensures years of secure fitment Weather-resistant and UV-stable finish Enhances rear bumper visual presence and sporty appeal Easy removal if desired – leaves no residue or damage Compatibility Model Years Body Type Fit Status Audi A6 C7 2016–2018 Sedan Direct Fit Audi A7 C7 2016–2018 Fastback Direct Fit Audi A6 C8 2019+ Sedan Not Compatible Audi A7 C8 2019+ Fastback Not Compatible Installation Difficulty: Easy | Time: 15–20 minutes Prepare the surface: Clean the rear bumper exhaust area thoroughly with soap and water. Dry completely and lightly wipe with a clean microfibre cloth. Remove any dirt, tar, or residue with automotive degreaser if needed. Heat the adhesive: Briefly warm the included adhesive tape strips with a heat gun or lighter (hold 3–4 inches away). Do not overheat—warm to touch is sufficient. This activates the 3M bond. Position the covers: Align the left and right covers symmetrically around your existing exhaust pipe openings. Mark the position lightly with a chinagraph pencil for reference. Apply adhesive: Peel the backing from the tape and press firmly onto the bumper for 30 seconds per side, maintaining even pressure across the full contact area. Allow cure time: Wait 24 hours before exposing the vehicle to water or driving. The bond continues to strengthen over 48–72 hours. Important: Surface temperature matters. Install in ambient conditions above 10°C for optimal adhesive performance. If removal is ever needed, warm the cover gently and peel slowly to avoid bumper paint damage. Elevate Your A6 / A7 Today Premium stainless steel exhaust trim that speaks the language of your Audi's engineering. Installed in minutes. Built to last. Order now and step into the sporting aesthetic your sedan deserves. Add to Cart Save 20% when you bundle with another item Code: 22GET20 4.9/5 – 12,300+ reviews 🌍 Worldwide shipping via DHL / FedEx ✓ 30-day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket accessories retailer and is not affiliated with, endorsed by, or connected to Audi AG, Volkswagen Group, or Audi Sport. All vehicle names and logos are registered trademarks of their respective manufacturers and are used solely for identification and compatibility purposes. This product is designed to fit the specified Audi models and is not an OEM part.

Premium Automotive Accessories Mercedes-Benz S-Class W222 Exhaust Muffler Cover Trim – Stainless Steel Premium mirror-polished stainless steel exhaust trim that elevates your S-Class aesthetic while providing lasting protection. S-Class W222 2014–2020 Stainless Steel Mirror Polish Exhaust Protection Easy Install Overview The Mercedes-Benz S-Class W222 represents the pinnacle of luxury engineering. To match that calibre, every detail matters—including the often-overlooked exhaust finish. This premium muffler cover trim elevates your S-Class' rear-end presence with mirror-polished stainless steel that catches light and admiring glances in equal measure. Each set comprises two individually crafted pieces engineered for seamless fitment on S-Class W222 models (2014–2020). The mirror-polished finish isn't merely decorative; it's a statement of refinement. The 23cm × 9cm dimension ensures complete coverage of the factory muffler exit, transforming a utilitarian component into a visible luxury accent. Installation is straightforward—automotive-grade double-sided tape means no drilling, welding, or permanent modification. In under 10 minutes, you've enhanced both appearance and protection against weathering, salt spray, and corrosion. For S-Class owners who view their car as an extension of their standards, this is a non-negotiable detail. What's Included ✦ 2x Muffler Cover Trim Mirror-polished stainless steel ✦ Automotive-Grade Tape Pre-applied, repositionable ✦ Installation Guide Step-by-step with safety notes ✦ Cleaning Cloth Microfibre, for surface prep Product Highlights Premium stainless steel construction—no rust, no corrosion Mirror-polished finish reflects light for maximum visual impact 23cm L × 9cm W × 300g weight for perfect proportions Seamless fitment on S-Class W222 (2014–2020) models Protective coating against salt spray and weathering Adhesive-backed—zero modification to your vehicle Set of 2 covers both exhaust exits symmetrically Quick 10-minute installation, professional results Enhanced rear-end presence and luxury appeal Maintains factory aesthetics while elevating refinement Compatibility Mercedes-Benz Model Year Range Fit S-Class W222 2014–2020 Direct Fit S-Class W222 2021+ Not Compatible R-Class W251 2010–2017 Direct Fit GL-Class X166 2013–2015 Direct Fit Other Mercedes Models All Years Not Compatible Verify your model year and chassis code before ordering. This product is precision-engineered for listed variants only. Installation Difficulty Level: Easy | Time Required: 10 minutes Clean the surface: Use the provided microfibre cloth to remove dust, debris, and residue from both exhaust muffler exits. Ensure surfaces are dry. Position the trim: Align the first muffler cover over the left exhaust exit, checking symmetry and alignment with the bumper line. Apply with pressure: Remove the adhesive backing and press firmly for 15–20 seconds. Hold steady to ensure full contact. Repeat for second piece: Apply the second cover to the right exhaust exit using identical technique. Allow to cure: Do not disturb or expose to water for 24 hours. This allows the adhesive to achieve full strength. Final inspection: Verify both covers are level, flush, and symmetrical. Adjust if necessary within the first 4 hours. Important: Apply only to cool mufflers. Do not install immediately after driving. Ensure exhaust is at ambient temperature (minimum 20 minutes after engine shutdown) to maximise adhesive bond strength. Ready to Perfect Your S-Class? This mirror-polished exhaust trim is the finishing touch your Mercedes-Benz S-Class deserves. Elevate your rear-end styling, protect against corrosion, and make a statement of refined taste. Stock is limited—order today. Shop Exhaust Trim Order any 2 accessories and unlock 22GET20 for 20% off your entire order 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist. We are not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler, or Daimler-Benz. All product names, logos, and brands are the property of their respective owners. This product is designed for aftermarket customization only.

Victorious Automotive · Mercedes-Benz · Key Accessories Mercedes-Benz Real Carbon Fiber Key Shell Cover Trim (2010–2023) Elevate your Mercedes key with genuine carbon fiber protection and unmistakable luxury styling. 2010–2023 Mercedes-Benz Real Carbon Fiber Key Protection Premium Finish Lightweight Overview This genuine carbon fiber key shell cover is engineered specifically for Mercedes-Benz models from 2010 onwards. Whether you drive an S-Class, E-Class, C-Class, or GLC, your key deserves the same attention to detail and quality as your vehicle. Everyday key wear—scratches, scuffs, fingerprints—degrades the look of an otherwise flawless machine. Our real carbon fiber trim transforms your key into a statement of precision engineering. The lightweight construction adds zero bulk while delivering exceptional durability against daily damage. Precision-fitted to your exact model, installation takes minutes with no tools required. Why choose genuine carbon fiber over plastic? Real carbon fiber develops character over time, resists UV fading, and carries the unmistakable aesthetic of motorsport and engineering excellence. It's the detail your Mercedes interior deserves. What's Included 🗝️ Carbon Fiber Key Shell Cover Precision-fitted trim for select Mercedes models 📋 Fitment Guide Identify your model and year in seconds Product Highlights Genuine carbon fiber – not vinyl wrap or plastic substitute Superior UV resistance – won't fade or yellow over time Lightweight design – negligible weight addition to your key Scratch and scuff protection – guards against daily wear Precision fit – engineered for exact model match No drilling or modification required – peel and seat installation Seamless integration – matches OEM Mercedes design language ISO9001 certified manufacturing – consistent quality control Professional finish – factory-grade edge detailing Adds instant visual impact – premium aesthetic upgrade Compatibility Mercedes-Benz Model Year Range Fitment S-Class 2010–2023 Direct Fit E-Class 2010–2023 Direct Fit C-Class 2010–2023 Direct Fit GLC 2015–2023 Direct Fit Other Mercedes Models Varies Check Fitment Always verify your exact model year and generation before purchase. If unsure, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) for rapid compatibility confirmation. Installation ⚙️ Installation Overview Difficulty: Beginner | Time Required: 5–10 minutes | Tools: None Remove your Mercedes key from the vehicle ignition. Clean the key surface with a dry, lint-free cloth to remove dust and oils. Carefully peel the backing from the carbon fiber cover trim, starting at one corner. Align the trim with the key shell, ensuring all edges are straight and centered. Press firmly from the center outward to secure, eliminating air bubbles. Allow 24 hours for adhesive to fully cure before heavy key use. Note: Do not install if key surface is wet, oily, or at temperatures below 10°C. Reposition within the first 60 seconds if alignment is off; adhesive becomes difficult to adjust after. Elevate Your Key to Match Your Mercedes Your key deserves the same precision and craftsmanship as your vehicle. Real carbon fiber isn't an accessory—it's a statement of engineering excellence. Shop Now Use code 22GET20 for 20% off any 2 items 4.9 ★ 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT Victorious Automotive is an independent aftermarket accessory supplier and is not affiliated with Mercedes-Benz AG, Daimler, or any official Mercedes-Benz distributor. All product names and logos are the property of their respective owners. This product is designed for fitment and aesthetic enhancement only.

```html Jaguar Accessories · XE / XFL / F-Pace / E-Pace · Exterior Trim ABS Chrome Carbon Fiber Door Handle Cover Trim for Jaguar XE, XFL, F-Pace & E-Pace Premium exterior door handle covers that elevate your Jaguar's curb appeal with a sleek carbon fiber aesthetic and easy adhesive installation. XE / XFL / F-Pace / E-Pace 2017–2018 ABS Material Carbon Fiber Finish 8-Piece Set Overview If you own a Jaguar XE, XFL, F-Pace, or E-Pace from 2017 onwards, you understand the importance of refined exterior detailing. The stock door handles are functional, but they lack the visual punch that modern owners expect. These ABS chrome carbon fiber door handle covers transform your Jaguar's appearance by adding a layer of premium styling that catches the eye from every angle. This complete set includes eight precision-engineered cover pieces—four for the outer handles and four for inner components. Manufactured in an ISO 9001–certified facility, each cover is molded from durable ABS plastic with a carbon fiber weave finish available in matte black, polished black, or bright chrome variants. The semi-gloss texture resists UV damage and maintains its appearance through seasons of use. Installation is straightforward: the adhesive backing requires no drilling, no modifications to your door mechanism, and no specialized tools. In under 30 minutes, your Jaguar gains a custom, high-end aesthetic that rivals dealer-installed options at a fraction of the cost. Whether you're preparing your car for resale or simply elevating your daily drive, this accessory delivers instant visual impact. What's Included 🎯 8-Piece Cover Set 4 outer + 4 inner door handles 🛡️ Double-Sided Adhesive Pre-applied, no separate glue needed 📦 Protective Packaging OPP bag + secure box ✅ ISO 9001 Certified Factory quality assurance Product Highlights ABS plastic construction with carbon fiber weave finish Fits Jaguar XE, XFL, F-Pace, and E-Pace (2017+) Available in matte black, polished chrome, or bright finish Double-sided adhesive backing—no tools or drilling required Lightweight at 300g total weight for all 8 pieces Pre-assembled and ready to install in under 30 minutes UV-resistant finish resists fading and discoloration Precision-fit design maintains door handle functionality Easy removal if desired—leaves no permanent marks ISO 9001–certified manufacturing quality Compatibility Jaguar Model Year Range Compatibility XE 2017–2018 Direct Fit XFL 2017–2018 Direct Fit F-Pace 2017–2018 Direct Fit E-Pace 2017–2018 Direct Fit X761 2017–2018 Direct Fit Earlier XE / F-Pace 2015–2016 Not Compatible Installation Guide Difficulty: Easy | Time: 25–30 Minutes Clean all door handles: Use rubbing alcohol or a clean cloth to remove dirt, dust, and residue from the outer and inner door handle surfaces. Let dry completely (2–3 minutes). Peel protective film: Remove the clear plastic protective backing from the adhesive side of each cover. Align and press: Carefully position each cover over its corresponding handle, then press firmly for 10–15 seconds to ensure full adhesion. Repeat for all handles: Work through all 8 pieces (4 outer, 4 inner) on both doors and both sides of the vehicle. Allow curing time: Wait 24 hours before opening doors forcefully or exposing to water. This allows the adhesive to fully set. Note: If handles have any protective film, wax coating, or ceramic sealant, use a light adhesive remover or rubbing alcohol first. Surfaces must be clean and dry for optimal adhesion. Test on an inconspicuous area if your handles have any special coating. Ready to Upgrade Your Jaguar? Transform your XE, XFL, F-Pace, or E-Pace with premium door handle covers that combine style, durability, and effortless installation. Thousands of Jaguar owners trust this accessory for instant curb appeal. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars – 12,300+ Verified Reviews 🌍 Worldwide Shipping – DHL, FedEx, UPS, TNT ✅ 30-Day Money-Back Guarantee – No Questions Asked 📞 Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is not affiliated with Jaguar Land Rover plc or any official Jaguar dealership. All product names, logos, and trademarks are property of their respective manufacturers. This product is an aftermarket accessory and is not OEM equipment. ```

Jaguar · F-PACE X761 · Interior Storage Interior Storage Box & Cup Holder Tray — Jaguar F-PACE X761 Compact, precisely fitted storage solution for coins, cards, and daily essentials—keeps your cabin organised without fuss. X761 / XFL 2016–2017 Premium Plastic Direct Fit Black OEM Integration Overview The Jaguar F-PACE (X761 / XFL, 2016–2017) deserves storage that matches its refined interior. This purpose-built storage box and cup holder tray integrates seamlessly into your cabin, providing practical organisation without disrupting the cabin's clean aesthetic. Manufactured in high-grade plastic with ISO9001 quality assurance, this tray holds small items—coins, credit cards, receipts, name cards—exactly where you need them. It's designed to slot directly into your F-PACE's interior architecture, requiring no modification to the vehicle. For owners who value both function and finish, this is the understated solution that transforms wasted cabin space into usable storage. Every detail has been engineered for your F-PACE. What's Included 📦 Storage Box Tray Full-sized cup holder + storage compartment ⚙️ Mounting Hardware Pre-fitted for F-PACE integration 📋 Installation Guide Quick-reference instructions included ✓ Quality Certified ISO9001 standard compliance Product Highlights Dedicated cup holder + coin/card storage in one unit High-grade moulded plastic construction (50g, compact design) ISO9001 quality certified for durability Black finish matches F-PACE interior trim Direct fit—no modifications required Holds credit cards, receipts, coins, name cards Precisely engineered for X761 / XFL models Easy installation in under 10 minutes Maintains original cabin aesthetics Perfect complement to F-PACE interior upgrades Compatibility Model Year Code Fitment Jaguar F-PACE 2016 X761 Direct Fit Jaguar F-PACE 2017 X761 / XFL Direct Fit Other Jaguar Models — — Not Compatible Installation Notes Difficulty: Beginner | Time: 5–10 minutes Locate the designated storage compartment in your F-PACE's interior cabin area (typically centre console or upper dashboard section). Unpack the tray and verify all components match your vehicle's year code (X761 or XFL). Align the mounting tabs with the factory mounting points. No tools required—friction fit. Press firmly until the tray seats fully. You should hear a soft click indicating secure installation. Test stability by gently pressing on the tray from multiple angles. It should not shift. Place coins, cards, or small items into the storage compartment to confirm capacity. Note: This tray integrates into existing cabin architecture. If your F-PACE has been heavily modified or has aftermarket interior trim, verify compatibility before installation. In rare cases, minor trim adjustment may be needed—proceed carefully. Complete Your F-PACE Interior Storage, organisation, and class—all in one compact piece. This tray is the subtle upgrade that makes daily driving more refined. Order now and transform your cabin. Shop F-PACE Accessories Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews 🌍 Worldwide shipping ✓ 30-day guarantee 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar, Jaguar Land Rover, or any OEM manufacturer. All vehicle names and codes are used for identification purposes only. Always verify fitment with your vehicle's VIN or chassis code before purchase.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Real Carbon Fiber Passenger Side Trim for Range Rover Sport L494 (2014–2019) Elevate your Sport's climate control area with authentic carbon fiber detailing that delivers the premium SVR aesthetic instantly. L494 2014–2019 Real Carbon Fiber LHD Clip-On Overview The Range Rover Sport L494 remains one of the most visually commanding mid-size SUVs on the road. For owners seeking to refine the interior cabin—particularly those running left-hand drive configurations—this carbon fiber passenger side trim transforms the climate control area with understated, premium detailing that catches the eye of anyone who knows what to look for. Crafted from genuine carbon fiber with a TPU protective layer, this trim clips directly over the existing climate cover without modification. The laser-cut profile ensures pixel-perfect alignment, creating a seamless integration that elevates the cabin's overall visual hierarchy. Whether you're aiming for the aggressive SVR look or simply adding a technical flourish to your daily driver, this piece delivers authentic carbon weave at a fraction of full interior retrim costs. Installation takes minutes. No drilling, no permanent alteration, no regret. This is the kind of upgrade that makes sense for Sport owners who appreciate precision engineering and aren't interested in compromises. What's Included 🧬 Carbon Fiber Trim Genuine carbon weave with TPU finish 📏 Precision Cut Laser-cut for OEM-grade fitment ✓ Ready to Install No preparation or additional parts required Product Highlights Genuine carbon fiber construction with protective TPU layer Fits 2014–2019 Range Rover Sport L494 (LHD only) Clip-over installation—no drilling or permanent modification Laser-cut profile for perfect OEM alignment Adds authentic SVR-inspired visual upgrade to cabin Resists fingerprints and maintains finish integrity Lightweight and durable weave structure Replaces standard climate control trim panel Compatible with all factory interior color schemes Elevates perceived cabin quality instantly Compatibility Model Year Range Drivetrain Status Range Rover Sport 2014–2019 LHD (Left-Hand Drive) Direct Fit Range Rover Sport 2014–2019 RHD (Right-Hand Drive) Not Compatible Range Rover Sport 2020–2024 (L461) All Not Compatible Other Range Rover Models All All Not Compatible Double-check your vehicle's drive configuration before purchasing. This trim is engineered exclusively for left-hand drive L494 models (2014–2019). Fitment on RHD vehicles or newer L461 generations is not supported. Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Open the driver-side door and locate the climate control trim panel on the passenger side. Gently pry the existing climate cover from the dashboard using a soft plastic trim tool (or your fingers if you're careful). Align the carbon fiber trim over the exposed area, ensuring the edges sit flush with the surrounding dashboard. Press firmly along the entire trim surface until all clips engage and the trim sits securely. Verify fitment by running your hand along the perimeter—there should be no gaps or movement. Reinstall any removed trim pieces and enjoy your upgraded cabin. Note: If you're uncomfortable removing dashboard trim, we recommend having a professional installer handle this. Most Land Rover and Range Rover specialists can complete the job in under 15 minutes. Ready to Upgrade Your Sport? Transform your Range Rover Sport's interior with authentic carbon fiber detailing. Clean, professional, and built to last—this is how the enthusiasts do it. Shop Range Rover Sport Parts Use code 22GET20 for 20% off any 2 items 4.9/5 from 12,300+ verified reviews 30-day money-back guarantee Worldwide shipping via DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar Land Rover, Range Rover, or any OEM manufacturer. All product names and vehicle designations are used for reference and compatibility purposes only. Always verify fitment with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Sport & Vogue · Interior Trim Chrome Power Outlet Trim — Range Rover Sport L494 & Vogue L405 (2009–2017) | SVO Autobiography Style A precision-crafted ABS chrome power outlet surround with laser-cut knurled detailing, purpose-built to bring an SVO Autobiography aesthetic to your Range Rover Sport or Vogue interior — no tools, no hassle. Range Rover Sport L494 Range Rover Vogue L405 2009–2017 ABS Chrome SVO Autobiography Style Knurled Detail Tool-Free Fit Interior Trim Under 5 Minutes Overview The Range Rover Sport and Range Rover Vogue occupy the upper echelon of the SUV world, and the owners who drive them know that interior refinement isn't something to leave to chance. Whether you're running an L494 Sport or an L405 Vogue, every element of the cabin tells a story — and the details matter most to those who know what to look for. This chrome power outlet trim cover takes direct inspiration from Land Rover's own SVO Autobiography bespoke division, translating that flagship-grade aesthetic into a straightforward, precision-manufactured upgrade. The laser-cut knurled pattern is the centrepiece — it mirrors the tactile, jewellery-like finish seen on SVO-prepared interiors and adds an unmistakable quality signal every time you or a passenger glances toward the centre console area. Constructed from high-grade ABS plastic with a durable chrome plating, this trim is built to hold its finish under real-world cabin conditions. The clip-in retention system means fitment is clean and secure, sitting flush against the factory surround without the need for adhesives, drilling, or any form of modification. It's the kind of upgrade that looks factory-fitted because it was designed to be exactly that. What's Included 🔲 Chrome Power Outlet Trim Cover 1 × unit — pre-finished, ready to install 📋 Fitment Guide Simple step-by-step installation reference Product Highlights Luxurious chrome finish inspired by Land Rover's SVO Autobiography division Laser-cut knurled pattern adds jewellery-grade sophistication to the cabin High-grade ABS construction ensures long-term durability and finish retention Precision-moulded for a flush, factory-integrated appearance Tool-free installation — clips securely into the factory outlet surround Installs in under 5 minutes with no modifications required No adhesives, drilling, or permanent alterations to your vehicle Fully reversible — original trim can be restored at any time Compatible with both left-hand and right-hand drive configurations Designed specifically for Range Rover Sport L494 and Vogue L405 interiors Compatibility Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Sport (pre-facelift) L320 2005–2013 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: Under 5 Minutes  ·  🔧 Difficulty: Beginner  ·  🛠 Tools Required: None Ensure your vehicle's ignition is off and the centre console area is accessible and free of obstructions. Locate the existing power outlet surround on your Range Rover Sport or Vogue centre console trim panel. If an original plastic surround is in place, gently flex it away from the panel using your fingertips — no tools are required. Set the original piece aside safely in case you wish to revert. Align the chrome trim cover over the power outlet aperture, ensuring the knurled face sits flush and centred against the surrounding panel. Apply even, firm pressure around the perimeter of the trim until you feel and hear the retention clips engage securely. The piece should sit completely flush with no movement or flex. Step back and inspect the fitment. The chrome finish should sit seamlessly within the cabin's trim landscape. No further adjustment is required. ⚠ Please Note: Verify your specific model year and trim variant before purchasing. While this piece is designed for L405 Vogue (2013–2017) and L494 Sport (2014–2017), interior trim configurations can vary across specification levels and model year facelifts. If you have any doubt about compatibility, please contact our team on +44 203 943 9919 before ordering. Elevate Your Interior. Right Now. This is the kind of upgrade that Range Rover owners who care about the details reach for first. Subtle, purposeful, and immediately impactful — it's how the interior should have looked from the factory. Shop the full range of interior accessories for your Range Rover Sport or Vogue at Victorious Automotive. Shop Range Rover Sport Accessories Shop Range Rover Vogue Accessories Buying 2 or more items? Use code 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. SVO and Autobiography are registered trademarks of Jaguar Land Rover Limited.