New products

Victorious Automotive · Range Rover Sport L320 · Interior Lighting 16-Piece LED Interior Lighting Kit – Range Rover Sport L320 (2006–2012) A complete, plug-and-play Canbus LED interior upgrade engineered specifically for the L320 Range Rover Sport — crisp 7000K white light, zero error codes, and a cleaner cabin ambience from the moment you close the door. L320 2006–2012 Canbus Ready 7000K White T10 / W5W / 194 16-Piece Kit 12V / 9–16V DC 50,000 Hr Lifespan Direct Fit No Error Overview The Range Rover Sport L320 was Land Rover's most driver-focused Sport model to date — a vehicle that balanced genuine off-road pedigree with a premium, purposeful interior. From the 2006 launch through to the 2012 facelift, the L320's cabin earned a strong reputation for quality, but the factory halogen interior bulbs always fell short of what the interior itself deserved. Dim, yellow-tinted map lights and lacklustre dome illumination simply don't do justice to a cabin of that calibre. This 16-piece LED interior kit was developed as a direct, vehicle-specific replacement for every major interior light position on the L320 Sport — covering map lights, dome lights, footwell areas, door courtesy lights, and the licence plate. Using high-output LED emitters behind a T10 (W5W/194) interface, each bulb slots directly into the factory holder with no modification required. The 7000K output delivers a clean, contemporary white light that transforms the cabin atmosphere immediately. Critically, each bulb in this kit is Canbus-compatible — meaning the vehicle's onboard diagnostics will not log a fault or display a warning light on your dashboard. This is a common frustration with generic LED conversions on L320 vehicles, and it's something this kit addresses by design. The result is a seamless upgrade that looks and behaves exactly as it should. What's Included 💡 Map / Reading Lights Front and rear passenger positions 🔆 Dome / Overhead Light Central cabin ceiling illumination 🚪 Door Courtesy Lights All four door sill positions 🦶 Footwell Lights Front and rear footwell areas 🔡 Licence Plate Lights Rear number plate illumination 🧰 Spare Bulbs Included Complete 16-piece set in the box Product Highlights Complete 16-piece kit covering all major interior light positions Canbus-encoded — no dashboard warning lights or error messages 7000K white output for a clean, modern cabin ambience T10 (W5W / 194) interface — direct factory socket fit Operates on 9–16V DC — compatible with standard 12V systems 7W low power draw — minimal impact on vehicle electrics Rated lifespan of over 50,000 hours — fit and forget Operating range: –20°C to +60°C — suited to all climates Vehicle-specific — engineered for L320 Range Rover Sport only 12-month warranty included as standard Compatibility Model Code Year Range Fit Range Rover Sport L320 2006 Direct Fit Range Rover Sport L320 2007 Direct Fit Range Rover Sport L320 2008 Direct Fit Range Rover Sport L320 2009 Direct Fit Range Rover Sport L320 2010 Direct Fit Range Rover Sport L320 2011 Direct Fit Range Rover Sport L320 2012 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–40 minutes  ·  Tools Required: None Ensure the ignition is off and the interior lights are not active before beginning any bulb swap. Use a trim removal tool or a flat-edged cloth-wrapped implement to gently prise open each light lens cover — most on the L320 clip open without screws. Remove each factory halogen bulb by carefully pulling it from its holder. T10 bulbs pull straight out — no rotation needed. Insert the corresponding LED bulb from this kit firmly into the same socket. Ensure the pins are fully seated and the bulb is secure. Clip the lens cover back into place and test the light before moving to the next position. Once all bulbs are installed, switch on the ignition and cycle through all interior lights to confirm correct operation and verify no warning messages appear on the instrument cluster. Note: If any bulb flickers on first installation, switch the bulb orientation 180° in the socket — LED polarity can occasionally need reversing depending on socket wiring. All bulbs in this kit are Canbus-rated, but if a warning persists on a particular position, contact our team at +44 203 943 9919 for guidance. Upgrade Your L320's Interior — The Right Way At Victorious Automotive, every product we stock is selected with one type of owner in mind: someone who cares deeply about their Land Rover and won't settle for second best. This LED kit is the cleanest, most complete interior lighting upgrade available for the L320 Range Rover Sport. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for the purpose of fitment identification and remain the intellectual property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Exterior Trim Land Rover Discovery 5 L462 Exhaust Tail Pipe Trim Cover — Muffler Surround Finisher 2017–2020 A precision-formed ABS tail pipe trim cover that restores the rear end of your Discovery 5 L462 with a clean, factory-complementing finish — no tools, no mess, no compromise. Discovery 5 L462 2017–2020 ABS Plastic Exhaust Finisher Tail Pipe Cover Muffler Trim 3M Adhesive No Drilling ISO 9001 Certified Direct Fit Overview The Land Rover Discovery 5 L462 is one of the most capable and refined family SUVs ever built — a genuine all-terrain machine dressed in contemporary, purposeful styling. From its sculpted flanks to its commanding rear end, every detail matters to owners who take pride in keeping their vehicle looking as good as it performs. The rear bumper area, however, is one zone that can begin to look tired over time, with exposed exhaust outlets and plastic surrounds that fade or attract road grime. This Exhaust Tail Pipe Trim Cover is a direct-fit exterior finisher designed specifically for the Discovery 5 L462 (2017–2020). Moulded from high-quality ABS plastic and finished to complement the vehicle's factory rear styling, this cover frames the exhaust outlets with a clean, structured surround that elevates the overall rear aesthetic. It sits flush against the bumper with precision-matched contours, hiding unsightly gaps and worn plastic while giving the tail end of your Discovery a purposeful, dressed appearance. Installation requires no drilling, no cutting, and no mechanical experience. Pre-applied 3M automotive-grade adhesive tape is included, making this a straightforward upgrade that can be completed in minutes. Whether you're refreshing a daily driver or detailing a show vehicle, this trim cover delivers a noticeably cleaner finish for minimal outlay. What's Included 🔲 Tail Pipe Trim Cover Set Pre-formed ABS surrounds for exhaust outlets 🔧 3M Adhesive Tape Pre-applied automotive-grade bonding tape 📄 Fitting Guidance Basic installation reference included Product Highlights Precision-moulded specifically for the Discovery 5 L462 chassis High-quality ABS plastic construction — durable and impact resistant Pre-applied 3M automotive adhesive for a secure, clean bond No drilling, cutting or modification required for fitting Frames and conceals exhaust outlets for a smarter rear appearance Flush fitment that mirrors factory rear bumper contours ISO 9001 certified manufacturing process for consistent quality Resistant to road grime, heat, and everyday exterior exposure Lightweight design — 0.5kg total — causes no load stress on bumper 100% brand new in factory condition — not refurbished or used Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2020 Direct Fit Land Rover Discovery 5 L462 Facelift 2021–2024 Verify Before Order Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–30 Minutes  ·  🔩 Tools Required: None Thoroughly clean the rear bumper area around the exhaust outlets using an isopropyl alcohol wipe or panel cleaner. Remove all grease, dirt, and wax residue to ensure strong adhesion. Allow the surface to dry completely before proceeding. Do not apply in cold or wet conditions — ideal temperature is 15°C to 30°C. Dry-fit the tail pipe trim cover against the bumper to confirm alignment and positioning before committing to adhesive. Peel the backing from the pre-applied 3M adhesive tape on the rear of the trim cover. Carefully align the cover to the exhaust surround area and press firmly into position. Apply sustained pressure for 30–60 seconds across the full surface to ensure full adhesive contact. Allow the adhesive to cure for a minimum of 24 hours before washing the vehicle or exposing to moisture. ⚠ Important: Please confirm this product is compatible with your exact Discovery 5 variant and model year before placing your order. If your vehicle has been modified or features an aftermarket rear bumper, fitment cannot be guaranteed. Contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you're unsure. Complete Your Discovery 5 Build Browse the full Victorious Automotive range of Land Rover Discovery 5 accessories — from interior trim upgrades to exterior styling components trusted by enthusiasts worldwide. Shop Discovery 5 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 — Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for compatibility purposes. Always verify fitment against your specific vehicle specification before purchasing.

Victorious Automotive · Range Rover Evoque L538 · Front Grille Front Replacement Grille – Range Rover Evoque L538 (2013–2018) A precision-fit ABS front grille designed specifically for the Range Rover Evoque L538, delivering a sharper, more assertive face with a free emblem included as standard. Evoque L538 2013–2018 ABS Construction Direct Fit Free Grille Emblem CCC Certified Racing Grille Style Worldwide Shipping Overview The Range Rover Evoque L538 occupies a distinctive space in the Land Rover lineup — compact enough for city driving, capable enough for light trail work, and consistently one of the most style-conscious vehicles in its class. Owners who choose the Evoque do so with an eye for design, and the front grille is one of the most visible elements that defines its character from the moment it comes into view. This replacement front grille is engineered specifically for the L538-generation Evoque produced between 2013 and 2018. Built from durable ABS plastic with a precision-moulded profile, it slots cleanly into the factory aperture without the need for cutting, drilling, or modification. The racing grille aesthetic gives the front end a more purposeful, performance-inspired appearance while maintaining the proportional balance the Evoque is known for. Every order includes a complimentary grille emblem, so you're not left hunting for the finishing touch once the fitment is complete. Whether you're refreshing a front end that's taken road damage or simply upgrading the factory look, this grille delivers a clean, confident result that's entirely at home on a premium-spec Evoque. What's Included 🔲 Front Grille Assembly ABS moulded, racing grille style, L538-specific profile 🔰 Grille Emblem Included free with every order — ready to fit 📦 Protective Packaging Secured for safe international transit via DHL / FedEx 📋 Fitment Guidance General installation reference included Product Highlights Designed exclusively for the Range Rover Evoque L538 (2013–2018) High-grade ABS plastic construction — lightweight and impact resistant Racing grille aesthetic for a more aggressive front-end stance Direct OEM aperture fit — no cutting or drilling required Complimentary grille emblem included with every order CCC certified for quality and safety assurance Dimensions: 100cm (L) × 40cm (W) × 17cm (H) — factory-matched sizing Shipping weight: 4kg — robust build without excess bulk Compatible with all trim levels across the 2013–2018 Evoque range Worldwide shipping via DHL, FedEx, UPS and TNT Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L538 2012 Direct Fit Range Rover Evoque L551 (2019–Present) 2019+ Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015+ Not Compatible Not sure about your exact model year or build spec? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tools, screwdrivers, fastener clips Ensure the vehicle is parked on a level surface with the ignition off. Open the bonnet and secure it safely before beginning work. Using a trim removal tool, carefully disengage the factory grille from its mounting clips along the top edge, working from the centre outward to avoid cracking the surround. Unclip the lower retaining tabs and any fasteners connecting the grille to the bumper assembly. Note the position of each fastener for reassembly reference. Gently disconnect any wiring harness attached to the factory badge or any ambient sensors situated within the grille opening, if applicable to your trim level. Remove the OEM grille assembly and set aside. Clean the mounting aperture before proceeding. Offer up the new grille to confirm alignment across all mounting points before committing to fitment. Seat the replacement grille firmly into the aperture, re-engaging all clips and fasteners in reverse order. Apply even pressure across the full width to ensure flush, rattle-free seating. Fit the included emblem centrally to the grille. Step back and check panel alignment before closing the bonnet. ⚠ Note: If your Evoque is equipped with front parking sensors or a front-mounted camera integrated into the grille surround, take care not to stress or disconnect any cabling during removal. If in doubt, consult a qualified automotive technician to complete the installation. Complete the Evoque L538 Look Browse the full Victorious range of Range Rover Evoque accessories — from exterior styling to interior protection — all selected and curated for the L538 generation. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover Evoque L538 · Lighting Upgraded Facelift-Style Rear Tail Light Assembly — Range Rover Evoque L538 (2010–2018) Bring your Evoque's rear lighting in line with the post-2016 facelift aesthetic — supplied as a complete pair, ready to fit in under an hour. Evoque L538 2010–2018 Facelift Style Sold as Pair PC + ABS Housing 12V OE Ref: LR072649 / LR072648 3 & 5 Door Pure · Prestige · Dynamic Overview The Range Rover Evoque L538 remains one of Land Rover's most recognisable compact SUVs — its sharp lines and premium detailing have aged gracefully since the model's 2011 debut. For owners of the pre-facelift variants (2011–2015), the rear lighting is one of the most visible styling differences between their car and the refreshed 2016-onwards version. The facelift brought a more sophisticated square inner light design that gave the Evoque a noticeably more modern, upmarket rear-end presence. This tail light assembly set replicates that 2016 facelift style exactly — supplied as a matched left and right pair, finished in PC+ABS composite housing for durability and clarity. Whether you're replacing a damaged unit or simply upgrading the look of an earlier Evoque, these lights deliver a seamless, factory-style result. They cross-reference directly to OE part numbers LR072649 and LR072648, ensuring correct fitment geometry and connector compatibility. Crucially, these fit all body styles and all trim levels of the Evoque L538 — Pure, Prestige and Dynamic, in both 3-door and 5-door configurations. No wiring modifications are required. If you're bringing your pre-2016 Evoque up to facelift spec, this is one of the most impactful and cost-effective changes you can make. What's Included 🔴 Driver Side Tail Light Right-hand rear assembly, facelift square design 🔴 Passenger Side Tail Light Left-hand rear assembly, matched pair 🔌 OE-Style Connectors Plug-and-play compatibility with existing loom 📦 Protective Packaging Each unit individually packed for safe transit Product Highlights Facelift 2016+ square inner light design replication Supplied as a complete left and right pair Fits all Evoque L538 trims — Pure, Prestige, Dynamic Compatible with both 3-door and 5-door body styles PC+ABS composite housing — impact and UV resistant 12V direct plug-and-play — no wiring modifications needed Cross-references OE part LR072649 / LR072648 Ideal upgrade for 2011–2015 pre-facelift Evoque owners Straight replacement for 2016–2018 facelift Evoque owners CCC externally tested and certified Compatibility Vehicle Year Range Body Style Trim Fitment Range Rover Evoque L538 2016–2018 3-Door & 5-Door All Trims Direct Fit Range Rover Evoque L538 2011–2015 3-Door & 5-Door Pure, Prestige, Dynamic Upgrade Fit Range Rover Evoque L538 2010 3-Door & 5-Door All Trims Upgrade Fit Range Rover Evoque L551 2019–2026 All All Not Compatible Range Rover Velar 2017–2026 All All Not Compatible Discovery Sport L550 2014–2026 All All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools Required: T20 Torx, Trim Removal Tool Open the tailgate and locate the trim panel covering the inner tail light mounting points on each side of the load bay. Using a trim removal tool, carefully prise away the inner boot trim panel to expose the rear light securing bolts or clips. Using a T20 Torx driver, remove the retaining fasteners holding the tail light assembly to the body. Gently pull the light assembly rearward away from the body panel. Avoid forcing — some adhesive sealant may be present on older units. Disconnect the wiring loom connector from the back of the existing assembly. Note the connector orientation. Connect the wiring loom to the new light assembly and confirm the connector clicks securely into place. Position the new assembly into the aperture, ensuring the alignment tabs locate correctly, then re-secure the fasteners. Refit the boot trim panel and test all light functions — brake, indicator, reverse and fog — before driving. ⚠ Note: These are aftermarket assemblies and are not sourced from Land Rover or Jaguar Land Rover. Always test all light functions thoroughly before returning the vehicle to normal use. If in doubt, consult a qualified automotive electrician or Land Rover specialist. Upgrade Your Evoque's Rear End Today One of the most impactful visual changes you can make to a pre-facelift Evoque — supplied as a complete pair and ready to fit. Explore the full Range Rover Evoque L538 accessories collection at Victorious Automotive. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. OE part numbers LR072649 and LR072648 are referenced for fitment identification purposes only. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue L405 · Exterior Styling 5-Piece Black Front Bumper Hood Centre Grille with Air Vents — Range Rover Vogue L405 (2014–2016) A precisely engineered, full front-end grille kit that delivers a bold, cohesive aesthetic upgrade to your Range Rover Vogue L405 — with integrated air vents to maintain optimal airflow at every speed. Range Rover Vogue L405 2014–2016 ABS Material Gloss Black 5-Piece Kit Integrated Air Vents Direct Replacement No Drilling Required Overview The Range Rover Vogue L405 — produced between 2013 and 2020 — is one of the most recognisable luxury SUVs on the road. Its commanding proportions and precisely sculpted front end set expectations high from the first glance. For owners of the 2014 to 2016 model year, the factory front grille and air vent arrangement, while refined, can benefit from a more assertive, purposeful appearance — particularly as the wider Range Rover design language has continued to evolve. This 5-piece Black Front Bumper Hood Centre Grille with Air Vents Kit is engineered specifically for the L405 Vogue. The centre grille and four matching air vents are crafted from high-grade ABS thermoplastic and finished in a deep gloss black — a finish that reads as intentional and factory-level in its execution. The Transformers-inspired design adds structured geometry to the front fascia without compromising the vehicle's inherent elegance. Each piece in this kit is shaped to the contours of the 2014–2016 L405 front bumper, meaning fitment is clean and alignment is consistent. The integrated air vents are not merely decorative — they maintain the functional purpose of the original openings, ensuring your engine and braking systems continue to receive adequate cooling airflow. This is an upgrade that respects the engineering of your vehicle while elevating what the eye first encounters. What's Included 🔲 Front Hood Centre Grille 1x gloss black ABS grille panel — main centrepiece of the kit 🌬️ Bumper Air Vents 4x matching black ABS air vents for left, right, upper and lower positions 🔩 Mounting Hardware Clip and fixing hardware for secure, rattle-free fitment 📄 Fitment Guide Reference instructions to assist with correct alignment during installation Product Highlights Engineered exclusively for Range Rover Vogue L405 2014–2016 — no universal fitment compromises High-grade ABS thermoplastic construction — resistant to UV degradation, moisture and road debris Deep gloss black finish — consistent sheen that holds up over time without peeling or fading Integrated air vents maintain active airflow — no compromise on engine bay or brake cooling Transformers-inspired geometry adds structural drama to the front fascia Direct replacement fitment — mounts to OEM fixing points without drilling or cutting Lightweight ABS construction — no added load on front bumper support structure Complete 5-piece coordinated kit — no mixing of finishes or sourcing individual pieces separately Enhances visual continuity between the bonnet, bumper and lower fascia Pairs cleanly with other black exterior trim upgrades for a cohesive front-end transformation Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2016 Direct Fit Range Rover Vogue L405 2013 Verify Before Purchase Range Rover Vogue L405 2017–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 60–90 Minutes  ·  Tools Required: Trim removal tools, flathead screwdriver, clean microfibre cloths Ensure the vehicle is parked on a flat, stable surface with the engine fully cooled. Disconnect the battery if your bumper features integrated sensors or lighting. Using a trim removal tool, carefully unclip the existing front centre grille from the bumper assembly. Work methodically from the outer edges inward to avoid cracking the surrounding trim. Remove each of the four factory air vents using the same technique — note the orientation of each vent before removal to ensure the replacements are seated correctly. Clean all mounting channels and recesses with a microfibre cloth to remove dust and debris before fitting new components. Begin with the centre grille — align to the OEM fixing points and press firmly until each clip engages with an audible click. Do not force; if resistance is felt, recheck alignment. Fit each of the four air vents in turn, ensuring flush alignment with the surrounding bumper surface. Check from the front of the vehicle to confirm even gaps on all sides. Reconnect the battery if disconnected. Step back and inspect the completed fitment from distance to confirm visual alignment across all five pieces. Note: Professional installation is recommended if you are unfamiliar with trim removal on the L405 platform. Forcing clips or misaligning panels can cause stress fractures to the bumper surround. If your vehicle is fitted with front parking sensors or active grille shutters, consult a qualified technician before proceeding. Upgrade Your Range Rover Vogue Explore the full range of exterior styling accessories for the Range Rover Vogue L405 — from bonnet trim to side vents and beyond. Every piece is selected to meet the standards your vehicle was built to. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Vogue L405 · Exterior Trim Side Fender Door Air Vent Kit Trim — Black Gloss & Chrome Line for Range Rover Vogue L405 (2014–2016) Restore your Vogue's factory fender vent aesthetic with precision-fit replacement slats finished in high-gloss black and polished chrome — a direct, no-modification solution for L405 owners. Range Rover Vogue L405 2014 · 2015 · 2016 High-Gloss Black Chrome Accent Strip Fender Vent Trim Direct Replacement No Drilling Required Left & Right Set Overview The Range Rover Vogue L405 is one of the most visually commanding luxury SUVs ever produced — and its side fender air vents are a defining detail of that silhouette. Over time, UV exposure, stone chips, and general weathering can leave those factory vent surrounds looking faded, cracked, or simply tired. When the details suffer, the whole presence of the vehicle suffers with them. This Side Fender Door Air Vent Kit Trim is engineered specifically for the Range Rover Vogue L405 model years 2014, 2015, and 2016. Each trim piece features precisely formed high-gloss black slats complemented by a polished chrome accent strip — faithfully replicating the OEM appearance your Vogue left the factory with. Whether you're replacing damaged originals or refreshing faded trim, this kit brings that signature vent detail back to showroom condition. Designed as a direct bolt-on replacement, this kit slots into the existing fender vent apertures without any cutting, drilling, or modification. The finish quality is consistent with what Range Rover owners expect: deep gloss black that holds its depth, chrome that won't flake, and a fitment that sits flush and true against the body line every time. What's Included 🔲 Left Fender Vent Trim Driver-side replacement vent surround with gloss black slats 🔲 Right Fender Vent Trim Passenger-side replacement vent surround, matched pair ✨ Chrome Accent Strips Pre-fitted polished chrome lines integrated into each slat assembly 🔧 Fitting Hardware Retention clips and fixings for a secure, rattle-free installation Product Highlights Precision-matched fit for Range Rover Vogue L405 2014–2016 High-gloss black finish for a deep, factory-quality appearance Polished chrome accent strip integrated into each slat unit Complete left and right side kit included in one purchase Direct replacement — no cutting, drilling, or modification needed UV-resistant materials to maintain gloss without fading Flush-mount design sits perfectly against the body line Rattle-free retention via supplied OEM-style fixing clips Restores the original factory aesthetic with no visual compromise Straightforward home-garage installation — no specialist tools required Compatibility Vehicle Code Year Range Fit Range Rover Vogue L405 2014 – 2016 Direct Fit Range Rover Vogue L405 2013 Verify Before Order Range Rover Vogue L405 2017 – 2021 Not Compatible Range Rover Vogue L460 2022 – 2026 Not Compatible Range Rover Sport L494 2013 – 2020 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Velar L560 2018 – 2022 Not Compatible Defender L663 2020 – 2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 Minutes  ·  Tools: Trim Removal Tool, Microfibre Cloth Park the vehicle on a level surface and allow the body panels to cool fully if the vehicle has been driven recently. Using a plastic trim removal tool, carefully prise the existing fender vent trim away from the fender aperture, working around the perimeter to release each retention clip in sequence. Avoid metal tools to prevent paint or panel damage. Once the old trim is free, clean the fender recess with a microfibre cloth to remove any dust, old clip debris, or adhesive residue. Align the new vent trim into position, ensuring the chrome strip faces outward and the slat orientation matches the original. Press firmly around the perimeter until all clips engage with a positive click. Repeat the process on the opposite side to complete the kit installation. Step back and inspect both sides from a short distance to confirm flush fitment and consistent alignment before driving. ⚠ Note: Always confirm your exact model year and fender vent aperture style before fitting. Minor production variation can exist between early and late 2013 L405 build dates. If in doubt, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Restore Every Detail. Own Every Road. At Victorious Automotive, we believe the details define the vehicle. Browse our full Range Rover Vogue L405 collection and keep your Vogue exactly as it deserves to be. Shop Range Rover Vogue L405 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 Expert Support +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 5 L462 · Exterior Trim ABS Front Bumper Grille Air Vent Cover – Land Rover Discovery 5 L462 (2017–2020) A precision-moulded ABS front bumper grille air vent cover designed to sharpen the front-end presence of your Discovery 5 with a clean, factory-integrated finish. Discovery 5 L462 2017–2020 ABS Plastic 3M Adhesive Fit No Drilling Required ISO 9001 Certified 0.5 kg Exterior Trim Overview The Land Rover Discovery 5 (L462) represents a significant evolution of the Discovery lineage — a vehicle that strikes the balance between urban practicality and genuine off-road capability. Its bold, upright front end is one of its defining visual features, and the bumper air vent detail is a key part of what gives the Discovery 5 its purposeful stance. Keeping that area looking sharp and well-finished matters to owners who take pride in how their vehicle presents. This front bumper grille air vent cover is moulded from high-quality ABS plastic and engineered specifically for the Discovery 5 L462 produced between 2017 and 2020. The piece has been designed to follow the exact contours of the OEM bumper architecture, delivering a seamless integration that looks factory-fitted. Whether you're looking to refresh a scuffed or faded original or simply elevate the front-end detail, this cover achieves both with minimal effort. Installation requires no drilling or specialist tools. The cover bonds directly to the bumper via pre-applied 3M automotive-grade adhesive tape — the same adhesive specification used in OEM trim applications. Manufactured in an ISO 9001-certified facility, quality control is built into every stage of production, ensuring consistent fitment and a finish that holds up over time. What's Included 🔲 Front Bumper Grille Air Vent Cover ABS plastic, vehicle-specific moulding for L462 Discovery 5 🔧 Pre-Applied 3M Adhesive Tape Automotive-grade, bonded to reverse of cover for direct application 📋 Installation Guidance Step-by-step fitting notes included with the product Product Highlights Precision-moulded ABS plastic for exact OEM-contour fitment Designed exclusively for Land Rover Discovery 5 L462 (2017–2020) Pre-applied 3M automotive adhesive — no drilling required Manufactured in an ISO 9001-certified production facility Colour-matched finish consistent with standard bumper trim Lightweight construction at 0.5 kg — no impact on vehicle dynamics Durable ABS resists UV exposure, road debris, and temperature cycling Clean, factory-integrated appearance once installed Reversible installation — no permanent modification to the vehicle Ideal for refreshing worn, scuffed, or faded OEM trim sections Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017 – 2020 Direct Fit Land Rover Discovery 5 L462 2021 onwards Verify Before Ordering Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 2004 – 2009 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Ensure the vehicle is clean and the front bumper surface is free from dust, grease, and moisture. Use an isopropyl alcohol wipe for best results. Dry-fit the cover against the bumper vent area to confirm alignment and orientation before committing to adhesion. Peel the protective backing from the pre-applied 3M adhesive tape on the reverse of the cover. Carefully align the cover to the bumper vent recess and press firmly into position, applying even pressure across the entire surface for 30–60 seconds. Run a finger around all edges to ensure full contact between the adhesive and the bumper surface. Allow the adhesive bond to cure fully before exposing to water, rain, or a car wash. ⚠ Important: Do not expose the fitted cover to water or moisture for a minimum of 72 hours following installation. This allows the 3M adhesive to achieve full bond strength. Installation is best performed at ambient temperatures above 10°C. Complete Your Discovery 5's Look Browse the full range of Land Rover Discovery 5 accessories at Victorious Automotive — trusted by over 12,300 Land Rover owners worldwide. Use code 22GET20 to save 20% when you buy any two items. Shop Discovery 5 Accessories 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for the purpose of describing product compatibility and remain the property of their respective owners. Please confirm fitment with your specific vehicle variant before ordering.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim AC Knob Decoration Cover & Air Conditioning Frame Trim — Land Rover Discovery 5 (2017–2020) A precision-fitted metal trim cover designed to refine the climate control surround of the Discovery 5 L462, eliminating the factory plastic look with a clean, purposeful finish. Discovery 5 L462 2017–2020 Metal Construction AC Knob Cover Interior Trim Direct Fit No Drilling ISO9001 Certified Overview The Land Rover Discovery 5 L462 is one of the most capable and sophisticated SUVs of its generation — a vehicle that blends genuine off-road ability with a premium interior environment. Owners who invest in the Discovery 5 understand that every detail inside the cabin matters, and the climate control area is one of the most interacted-with surfaces on any journey, short or long. This AC knob decoration cover and air conditioning frame trim is engineered specifically for the Discovery 5 produced between 2017 and 2020. Manufactured from metal with an ISO9001-certified production process, it replaces the exposed plastic around the climate control knobs with a structured, refined surround that sits flush with the existing dash architecture. The result is a more cohesive, premium appearance across the centre console area. Unlike generic interior trim pieces, this cover has been dimensioned to the exact profile of the Discovery 5's HVAC panel. Installation requires no permanent modification — it locates cleanly using existing mounting points and adhesive retention, making it a reversible upgrade that adds genuine visual value without compromising any factory systems or warranty considerations. What's Included 🔲 AC Knob Decoration Cover Metal trim ring for climate control knobs 🖼️ AC Frame Surround Full decorative frame for the HVAC panel area 🔧 Fitment Hardware Adhesive clips or retention tabs as required 📄 Installation Guide Step-by-step fitment reference Product Highlights Precision-engineered for Discovery 5 L462 (2017–2020) HVAC panel Metal construction — no flex, no rattle, no cheap plastic feel ISO9001-certified manufacturing process for consistent quality Direct fit with no drilling, cutting, or permanent modification Weighs just 0.15 kg — negligible addition to interior weight Fully reversible — original panel restored in minutes if needed Designed to complement existing Discovery 5 interior colour schemes Covers the factory plastic surround for a cleaner visual finish Compatible with all Discovery 5 trim levels across 2017–2020 Sourced from a specialist automotive interior components manufacturer Compatibility Vehicle Code Years Fit Land Rover Discovery 5 L462 2017 · 2018 · 2019 · 2020 Direct Fit Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Land Rover Discovery 5 (Facelift) L462 2021+ Verify Before Purchase Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: Trim pry tool, microfibre cloth Ensure the vehicle is parked, ignition off, and the interior is at ambient temperature. Cold plastic is more brittle — work in a warm environment where possible. Using a soft plastic trim pry tool, carefully release the existing factory AC panel surround from its mounting position. Work slowly around the perimeter to avoid stressing the surrounding dash material. Clean the exposed surface area thoroughly with a dry microfibre cloth. Remove any dust, oils, or residue that could compromise adhesion. Test-fit the decoration cover and frame without committing to final placement. Confirm alignment with the knob positions and panel edges before securing. Once satisfied with alignment, apply firm, even pressure across the trim piece to seat it fully. Allow any adhesive retention to cure for 30 minutes before normal use. Cycle through the climate control functions to confirm all knobs operate freely with full range of motion and no obstruction from the new trim. ⚠ Note: If your Discovery 5 features a revised or updated HVAC layout not consistent with the standard 2017–2020 specification, verify panel dimensions against product images before installation. If in doubt, contact our team on +44 203 943 9919 before fitting. Upgrade Your Discovery 5 Interior Small details make a significant difference inside a vehicle you drive every day. Browse our full range of Land Rover Discovery 5 interior accessories — each piece selected for fit, finish, and genuine compatibility. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover and Jaguar Land Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L538 · Exterior Styling Chrome Headlight Eyebrow Eyelid Cover Trim Strip — Range Rover Evoque L538 (2015–2018) Precision-formed stainless steel chrome accent strips that frame your Evoque's headlights and tail lights with a purposeful, factory-refined edge — no drilling, no mess, no compromise. Evoque L538 2015–2018 Stainless Steel Chrome Finish 3M Adhesive 2 PCS / Set ISO9001 Certified No Drilling Required Overview The Range Rover Evoque L538 Convertible and Ember Edition occupy a unique space in Land Rover's lineup — compact enough for city driving, distinctive enough to command attention wherever it goes. Owners of this model know that the details matter enormously, and the lighting surrounds are one of the first areas where considered styling upgrades can make a visible difference. These chrome headlight and tail light eyelid trim strips are crafted from mirror-polished stainless steel and designed to sit flush above the lamp housings, creating a sculpted brow effect that sharpens the Evoque's already angular face. The result is an assertive, purposeful aesthetic that complements the vehicle's original design language without overwhelming it. The stainless construction ensures the chrome finish holds its quality through rain, road wash, and UV exposure — unlike painted or plastic alternatives that fade and bubble over time. Installation requires no modification to your vehicle whatsoever. Each piece arrives pre-fitted with premium 3M automotive-grade adhesive tape, allowing a clean, secure bond directly to the lamp housing surround. Whether you're refining a daily driver or detailing a show vehicle, these strips deliver an immediately noticeable transformation with none of the complication of professional fitting. What's Included 🪞 Chrome Eyelid Trim Strips 2 PCS per set — one per headlight or tail light housing 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade backing pre-fitted to each strip 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Mirror-polished stainless steel construction for lasting chrome brilliance Precision-formed to match the Evoque L538 lamp housing profile exactly Pre-applied 3M automotive adhesive — no tools, no drilling required 2 PCS per set for a symmetrical, complete front or rear fitment ISO9001-certified manufacturing facility — consistent quality assurance Corrosion-resistant material handles rain, wash, and UV exposure reliably Lightweight at 0.35kg — no added stress to lamp housing or bodywork Slim profile (0.3" height) integrates cleanly without looking aftermarket Sharpens the Evoque's distinctive angular headlight design language Exported globally — trusted by Evoque owners across multiple markets Compatibility Vehicle Year Range Variant Fitment Range Rover Evoque L538 2015–2018 Standard / Convertible / Ember Edition Direct Fit Range Rover Evoque L538 2011–2014 All Variants Verify Before Purchase Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Evoque L538 2015–2018 Variant / Special Build Editions Contact Us First If your Evoque has a modified front end or non-standard lamp cluster, please contact our team before ordering. We're here Mon–Fri 9am–7pm on +44 203 943 9919. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Time: 20–30 Minutes  ·  🛠 Tools Required: None Clean the surface thoroughly. Using isopropyl alcohol (70% or higher), wipe the headlight surround area where the trim will sit. Ensure no dust, wax, grease, or moisture remains — a clean surface is critical for maximum adhesive performance. Test-fit each strip before bonding. Hold the trim piece against the lamp housing to confirm alignment and positioning. The strip should sit flush along the upper edge of the headlight or tail light unit. Warm the adhesive tape. Using a heat gun or hair dryer, gently warm the 3M adhesive backing on the trim piece. Warming the lamp surround surface at the same time further activates the bond. This step significantly improves long-term adhesion. Peel the 3M backing and bond. Remove the adhesive liner and carefully press the strip into position. Apply firm, even pressure along the full length for 30–60 seconds to ensure full contact. Allow the bond to cure. Do not wash your vehicle, expose it to heavy rain, or apply pressure to the trim for at least 48 hours after fitting to allow the adhesive to fully cure. ⚠ Please Note: These trim strips are not designed for variant or specially modified versions of the Evoque L538. If your vehicle has an aftermarket front bumper, modified lamp housings, or non-standard exterior panels, please contact us before purchasing. What is sent corresponds exactly to the product images — please review all photos carefully before ordering. Complete Your Evoque's Exterior Browse the full Victorious range of accessories designed and curated specifically for the Range Rover Evoque L538 — from exterior accents to interior refinements, all selected to the same standard. Shop Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious · Universal Fit · Interior Storage Universal Fit Sunglasses Holder Storage Box Premium eyewear protection and organisation designed to seamlessly integrate with any vehicle interior. Universal Fit All Years Visor Mount Scratch Protection Multiple Colours Overview Sunglasses are an investment—whether you're driving your Audi through urban streets or enjoying open-road adventures. This Universal Fit Sunglasses Holder Storage Box transforms how you store and access your eyewear, eliminating the frustration of searching the glove box or dashboard while driving. Engineered for precision fit across a wide range of vehicles, this storage solution mounts directly to your visor, keeping sunglasses within arm's reach and protected from scratches, dust, and UV damage. The soft-lined interior cradles your frames while the discreet design blends naturally into your cabin aesthetic. Why it works: A dedicated storage home reduces clutter, extends eyewear lifespan, and eliminates distraction while driving. Simple one-step installation means you're organised within minutes. What's Included 📦 Storage Case Premium soft-lined sunglasses holder 📖 Instruction Manual Easy-to-follow installation guide Product Highlights Protects lenses and frames from scratches and impact Soft-lined interior preserves premium eyewear finish Mounts securely to vehicle visor Universal compatibility across vehicle models Available in multiple colours to match cabin trim Discreet profile keeps interior clean and organised Tool-free installation in under 2 minutes Keeps eyewear within reach whilst driving Reduces dashboard clutter and distraction Extends lifespan of expensive sunglasses Compatibility Vehicle Type Fit Status Notes Audi (All Models) Direct Fit Verify visor dimensions before purchase BMW (All Models) Direct Fit Standard visor mounts Mercedes-Benz (All Models) Direct Fit Compatible with most visor clips Land Rover / Range Rover (All) Direct Fit Works with standard visors Other Makes (General Auto) Direct Fit Universal mounting—check visor size Installation Installation Guide Lower your vehicle's sun visor fully Position the storage box against the visor rear panel Press firmly until the mounting clips engage securely Test by gently pulling the case to confirm it's locked Insert your sunglasses and close the lid Important: Measure your visor width and depth before installation. Most vehicles accommodate standard visors (approximately 160–200mm wide); oversized aftermarket visors may require adapter hardware (sold separately). Ready to Organise Your Cabin? Protect your eyewear investment and declutter your dashboard with this premium sunglasses storage solution. Simple installation, timeless design, and genuine functionality across any vehicle. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 30-Day Money-Back Guarantee ✓ 4.9★ Rated by 12,300+ Owners ✓ Worldwide Shipping via DHL, FedEx, UPS, TNT ✓ Expert Support +44 203 943 9919 Victorious Automotive is an independent accessory specialist and is not affiliated with Audi, BMW, Mercedes-Benz, Land Rover, Range Rover, or Jaguar Land Rover. All vehicle names, logos, and trademarks remain the property of their respective manufacturers. Product compatibility is based on standard OEM specifications; individual vehicles may vary.

Victorious Automotive · Land Rover Discovery LR3 / Discovery 4 · Interior Trim Decorative Rear Air Vent Outlet Trim Ring Sticker for Land Rover Discovery LR3 / Discovery 4 (2004–2016) A precision-cut trim ring that transforms the look of your rear cabin air vents — a subtle but immediately noticeable interior upgrade for Discovery 3 and Discovery 4 owners. Discovery LR3 / LR4 2004–2016 Interior Trim Vent Ring Sticker Direct Fit No Tools Required Rear Air Outlet Set of 2 Overview The Land Rover Discovery 3 and Discovery 4 are capable, characterful machines — and their interiors deserve to reflect that same level of attention. Over time, the factory plastic surrounds on the rear cabin air vents can look tired or simply feel underwhelming against an otherwise quality interior. It's one of those small details that Discovery owners notice, even if no one else does. These Rear Air Vent Outlet Trim Ring Stickers are designed as a direct-fit upgrade for Discovery LR3 and Discovery 4 models built between 2004 and 2016. Precision-cut to follow the exact contours of the rear vent bezels, each ring installs cleanly and securely, elevating the finish of the rear cabin without any modification or specialist work. The result is a noticeably sharper, more refined look that aligns with the premium character these vehicles are known for. Whether you're refreshing your Discovery 4 ahead of a sale or simply taking pride in a vehicle you plan to keep for years, these trim rings are one of the easiest, most cost-effective interior upgrades available. Clean fitment, quality materials, and a look that simply belongs. What's Included 💨 Rear Air Vent Trim Rings × 2 One ring per rear air outlet vent — full set for both sides 📋 Installation Instructions Included in the package for straightforward fitting 🔧 Pre-Applied Adhesive Backing tape included — no additional adhesives needed Product Highlights Precision-cut to match the Discovery LR3 and LR4 rear vent bezels exactly Durable construction built to withstand daily cabin temperature changes Enhances the rear cabin's interior finish with a clean, modern edge Tool-free installation — peel, align, and press into place Pre-applied adhesive backing ensures a secure, long-lasting bond Slim profile sits flush with the existing vent surround — no protrusion Resists fading and discolouration under interior UV exposure Compatible with both Discovery 3 (LR3) and Discovery 4 (LR4) variants Set of 2 covers both rear air vents in a single purchase Reversible upgrade — can be removed cleanly if required Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Defender L663 2020–Present Not Compatible Installation Notes ⏱ Estimated Time: 10–15 minutes  ·  🔧 Difficulty: Beginner Begin with a clean, dry interior. Use an isopropyl alcohol wipe to thoroughly clean the surface of each rear air vent bezel and allow to dry completely for at least 2–3 minutes. Dry-fit each trim ring against its respective vent surround to confirm alignment and orientation before committing to the adhesive. Starting with one ring, peel the protective backing from the adhesive side carefully — avoid touching the adhesive surface with your fingers. Align the ring precisely with the vent bezel edges and press firmly into position, applying steady pressure from the centre outward for 20–30 seconds. Repeat the process for the second ring on the opposite vent. Allow the adhesive to cure for at least one hour before exposing to extreme temperature changes or vehicle use. ⚠ Important: Ensure the vent surface is free from dust, grease, and any residue before installation. Application on a warm surface (18–25°C) will improve adhesive bond strength. Do not attempt to reposition once the adhesive has made contact. Shop by Vehicle Looking for more accessories for your Discovery or Range Rover Sport? Browse our full curated collections below: 🚙 Discovery 3 (LR3) Full accessory range for L319 2004–2009 🚙 Discovery 4 (LR4) Full accessory range for L319 2009–2016 🏁 Range Rover Sport L320 Accessories for Sport 2005–2013 The Details Are What Define It At Victorious Automotive, we believe the best Land Rover is the one that reflects the pride of its owner. These vent trim rings are a small upgrade — but they're the kind of detail that separates a well-kept Discovery from every other one on the road. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT 🔄 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are used for identification and fitment reference purposes only.

Victorious Automotive · Land Rover Discovery & Range Rover Sport · Dashboard Climate Controls Dashboard Climate Control Switches for Land Rover Discovery & Range Rover Sport (2010–2016) Precision-fit ABS climate control switch covers that restore and elevate your dashboard's factory finish — no tools, no modifications, no compromise. Discovery 4 (L319) Range Rover Sport L320 2010–2016 ABS Material Tool-Free Fit Direct Replacement Premium Finish 29g Lightweight Overview The Land Rover Discovery 4 and Range Rover Sport L320 share one of the most driver-focused interiors of their generation — a cabin built around control, clarity, and commanding presence. Over time, however, the original climate control switch surrounds can show wear, discolouration, or simply lack the refined finish these vehicles deserve. These dashboard climate control switch covers are designed specifically to address that. Manufactured from high-grade ABS, each cover is formed to match the precise contours of the original dashboard architecture found in 2010–2016 Discovery and Range Rover Sport models. The result is a seamless integration that looks factory-correct while adding a noticeably sharper, more premium aesthetic to the centre console area — particularly relevant if you're refreshing an interior ahead of sale or simply maintaining the standard your vehicle was built to. Unlike generic trim pieces, these covers are dimensioned and finished with the specific switch layout of these platforms in mind. At just 29g and 3.9cm in length, each unit is compact but purposeful — slotting into place without adhesive, drilling, or any permanent modification to your vehicle's interior. What's Included 🎛️ Climate Control Switch Covers Full set of button ring covers for dashboard fitment 📋 Fitment Guide Basic installation reference included 🛡️ Protective Packaging Secured to prevent transit damage to finish Product Highlights Precision-engineered for 2010–2016 Discovery 4 and Range Rover Sport L320 dashboard layouts High-grade ABS construction for durability and long-term colour stability Tool-free installation — clips directly over existing switch surrounds No permanent modifications required to original interior trim Premium surface finish elevates the look of the climate control zone Lightweight at just 29g — no impact on switch operation or feel Compact 3.9cm profile maintains factory-correct depth and clearance Ideal for interior refresh, pre-sale preparation, or replacing worn originals Compatible with both left-hand and right-hand drive configurations (verify before purchase) Consistent with Victorious Automotive's standard for fit, finish, and quality assurance Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 4 L319 2010–2016 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Land Rover Discovery 3 L319 (early) 2004–2009 Verify First Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Not sure which model code you have? Contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm compatibility before you order. Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 5–10 Minutes  |  🛠 Tools Required: None Ensure your vehicle is parked with the ignition off and the interior at ambient temperature before beginning. Inspect the existing climate control switch surrounds for any debris, dust, or residue and gently clean with a dry microfibre cloth. Remove the new switch covers from their protective packaging and confirm they match the profile of your existing dashboard switch surrounds. Align the cover carefully over the switch surround, ensuring all edges are flush and the orientation matches the original layout. Apply firm, even pressure across the cover until you feel or hear it click securely into position. Repeat for remaining covers in the set, then operate each climate control switch to confirm there is no obstruction or resistance. ⚠ Please Note: Do not force covers into position if resistance is felt — this may indicate a fitment mismatch. Always verify your vehicle's model code and year before installation. These covers are designed as surface overlays and should not interfere with underlying switch mechanisms when fitted correctly. Shop by Vehicle Looking for accessories specific to your Land Rover or Range Rover? Browse our dedicated vehicle collections below: 🚙 Discovery 4 L319 · 2009–2016 🚙 Discovery 3 L319 · 2004–2009 🚙 Range Rover Sport L320 L320 · 2005–2013 🚙 Discovery 5 L462 · 2017–2024 Trusted by 12,300+ Land Rover Owners Worldwide Every detail matters inside a Discovery or Range Rover Sport. These climate control switch covers are a small change that makes a genuine difference — and they ship to your door via DHL, FedEx, UPS, or TNT, wherever you are in the world. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day money-back guarantee ✈️ Worldwide DHL · FedEx · UPS · TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced on this page are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Evoque · Exterior Trim Exterior Hood Air Vent Outlet Wing Trim for Land Rover Range Rover Evoque (2012–2018) Protect and elevate your Evoque's bonnet air vents with a precision-fit ABS chrome trim pair that adds a factory-finished, upscale aesthetic in minutes — no tools required. Range Rover Evoque L538 2012–2018 ABS Chrome Plastic Self-Adhesive Fit 1 Pair – 2 Pieces Black & Silver / All Black CCC Certified Exterior Trim Overview The Range Rover Evoque L538 is a vehicle that wears its design credentials proudly — compact yet assertive, every exterior detail contributes to the overall character of the car. The hood air vent outlets on the Evoque's bonnet are a defining design element, but over time, exposure to UV, road debris, and everyday wear can leave them looking scuffed, discoloured, or simply underwhelming against an otherwise well-maintained exterior. These Hood Air Vent Outlet Wing Trims are purpose-designed to sit cleanly over the existing vent apertures, providing a layer of protective coverage while simultaneously upgrading the visual presence of the bonnet. Crafted from high-grade ABS plastic with a chrome finish, the trims deliver a polished, premium look that complements the Evoque's signature styling without looking aftermarket or out of place. The self-adhesive mounting system means installation is genuinely straightforward — no drilling, no brackets, no risk of damaging your paintwork. Whether you choose the dual-tone Black & Silver finish for a refined contrast effect, or the all-Black option for a stealthier, more understated look, both variants are built to last through British weather and beyond. What's Included 🔲 Hood Air Vent Wing Trims 1 Pair (2 pieces) — left & right matched set 🔧 Pre-Applied Adhesive Tape 3M-style self-adhesive backing pre-fitted to each trim 📐 Fitment: Left & Right Mirror-matched pair for symmetrical installation Product Highlights Precision-engineered to match the Evoque L538 bonnet vent profile exactly High-grade ABS plastic — lightweight, impact-resistant, and rust-proof Chrome finish adds a factory-luxury aesthetic to the bonnet vents Shields vent surfaces from scratches, chips, and environmental grime Self-adhesive backing for a clean, tool-free installation No drilling, cutting, or modification to your vehicle required Available in Black & Silver or all-Black to suit your colour scheme UV-resistant finish — won't fade or discolour in direct sunlight CCC externally tested and certified for quality assurance Compatible across a wide range of Land Rover models and year spans Compatibility Vehicle Years Fitment Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Vogue L405 2013–2018 Direct Fit Range Rover Sport L494 2014–2018 Direct Fit Land Rover Discovery 4 2010–2016 Direct Fit Land Rover Freelander 2 2007–2014 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2025 Not Compatible Range Rover Sport L461 (3rd Gen) 2022–2026 Not Compatible Range Rover Vogue L460 (5th Gen) 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your specific build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔩 Tools Required: None Clean the surface: Thoroughly clean the bonnet vent area using an isopropyl alcohol wipe or panel wipe solution. Remove all grease, wax, and residue, then allow to dry completely for a minimum of 5 minutes. Test fit before committing: Hold each trim piece in position over the corresponding vent outlet without removing the adhesive backing. Confirm alignment and orientation before proceeding. Warm the adhesive: In cooler weather, gently warm the adhesive backing with a heat gun or hairdryer on a low setting for 10–15 seconds. This improves initial bond strength significantly. Peel and position: Remove the adhesive backing from one trim piece, carefully align it to the vent outlet, and press firmly into place starting from the centre outward to eliminate air pockets. Apply firm pressure: Hold firm, even pressure across the entire trim surface for at least 30 seconds per piece to ensure full adhesive contact. Repeat for the second trim: Follow the same process for the opposite side, ensuring symmetrical placement. Cure time: Allow 24 hours before washing the vehicle or exposing the trim to heavy rain to allow the adhesive bond to fully cure. ⚠ Note: Do not attempt installation in temperatures below 10°C without pre-warming the adhesive. Cold conditions significantly reduce initial adhesion and may result in the trim lifting at the edges. Ensure the bonnet surface is completely dry before application. Shop by Vehicle Looking for more accessories for your Land Rover or Range Rover? Browse our dedicated vehicle collections below: 🚙 Range Rover Evoque L538 2012–2018 accessories 🚙 Range Rover Evoque L551 2019–2025 accessories 🚙 Range Rover Vogue L405 2013–2020 accessories 🚙 Range Rover Sport L494 2013–2020 accessories 🚙 Land Rover Discovery 4 2010–2016 accessories 🚙 Land Rover Discovery 5 2017–2023 accessories Built for Land Rover Owners Who Don't Compromise At Victorious Automotive, every product we stock is selected to meet the standards your vehicle deserves. Free worldwide shipping, a 30-day money-back guarantee, and 12,300+ verified five-star reviews speak for themselves. Shop All Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Product images are representative; slight variations in finish may occur between production batches.

Victorious Automotive · Range Rover Evoque L538 · Exterior Trim Range Rover Evoque Side Air Vent Outlet Cover Trim — Gloss Black / Matte Chrome (2012–2017) A direct-fit, adhesive-backed side vent cover trim for the Evoque L538 that elevates the exterior finish with bold contrast — available in Gloss Black or Matte Chrome. Evoque L538 2012–2017 ABS Plastic Gloss Black Matte Chrome 3M Adhesive Set of 2 No Drilling Exterior Trim Overview The Range Rover Evoque L538 is one of Land Rover's most design-forward vehicles — a compact luxury SUV that made an immediate statement when it arrived in 2011. Its angular bodywork, raked roofline, and strong character lines were never intended to blend in. Yet as Evoque models age, the original exterior trim pieces can lose their visual impact — fading, yellowing, or simply failing to reflect the level of finish their owners expect. These side air vent outlet cover trims are designed specifically for the 2012–2017 Evoque L538, covering the decorative side vents located along the front wings. Whether you're refreshing a tired original finish or adding a sharper contrast against your body colour, these covers offer two confident options: a high-gloss black for a blacked-out, sport-influenced aesthetic, or a matte chrome for a cooler, contemporary metallic look that complements both light and dark paint tones. Manufactured from high-grade ABS plastic with a robust surface finish, these trims are engineered to resist UV exposure, moisture ingress, and everyday wear. The pre-applied 3M automotive-grade adhesive tape on the reverse ensures a clean, flush bond to the factory vent housing — no drilling, no bodywork modification, and no professional fitting required. For Evoque owners who take pride in the details, this is one of the most cost-effective ways to refresh the exterior character of an already striking vehicle. What's Included 🔲 Side Vent Cover Trim × 2 Left and right pieces supplied as a matched pair 🔴 Pre-Applied 3M Tape Automotive-grade adhesive already fitted to reverse 📐 Direct-Fit Profile Moulded to match OEM vent geometry precisely 🎨 Finish Choice Available in Gloss Black or Matte Chrome Product Highlights Precision-moulded ABS plastic for a consistent, high-quality surface finish Available in Gloss Black and Matte Chrome to suit different exterior colour schemes Supplied as a set of 2 — both left and right covers included Pre-applied 3M automotive adhesive tape for a clean, no-drill installation Designed and profiled specifically for the Evoque L538 2012–2017 vent housing UV-resistant finish helps prevent fading or dulling over time Flush-fit design that looks factory-fitted once applied No professional fitting required — achievable at home in minutes Lightweight construction adds no meaningful weight to the bodywork Ideal for exterior refresh, personalisation, or replacing discoloured OEM trim Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Evoque (Facelift) L538 2016–2019 Verify Before Order Range Rover Evoque L551 2019–2025 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean both side vent surfaces using an isopropyl alcohol wipe or equivalent degreaser. Remove any wax, polish residue, or road grime to ensure a strong adhesive bond. Allow the surface to dry completely. In cold conditions (below 10°C), gently warm the vent area with a heat gun or hair dryer — this improves 3M tape adhesion significantly. Dry-fit each cover trim to the vent without removing the tape backing. Confirm alignment and check that the profile sits flush against the vent housing on all edges. Peel the protective backing from the 3M tape. Carefully align the trim cover to the vent opening, pressing firmly from the centre outward to avoid trapping air bubbles beneath the panel. Apply firm, even pressure across the full surface for 30–60 seconds. For best results, avoid washing the vehicle for 24–48 hours to allow the adhesive to fully cure. ⚠ Note: If your Evoque is a 2016–2017 model, please verify the vent housing design before ordering. Late L538 facelift models may have a slightly revised vent profile. If in doubt, contact us at +44 203 943 9919 and our team will confirm compatibility. Complete the Evoque's Exterior These vent covers are just one part of a full exterior transformation. Browse our dedicated Range Rover Evoque L538 collection for bonnet vents, mirror caps, grille surrounds, door handle covers, and more — all designed to the same standard of fit and finish. Shop Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Lighting Aftermarket LED Rear Tail Light Assembly for Range Rover Sport L494 (2014–2020) — 2018 Facelift Style A direct-fit LED tail light upgrade that brings the sharper, more contemporary lighting signature of the post-facelift Sport to pre-facelift models — without modification. Range Rover Sport L494 2014–2020 LED Lighting ABS + PC 12V Facelift Style Direct Fit Pair Included CCC Certified LR116468 / LR116471 Overview The Range Rover Sport L494 remains one of Land Rover's most compelling performance SUVs — a vehicle that balances genuine off-road capability with a presence on the road that few rivals can match. Whether you're running a pre-facelift 2014–2017 model or the refreshed 2018–2020 version, the rear end is central to how the Sport is perceived from behind. These aftermarket LED tail light assemblies are engineered to the proportions and mounting points of the L494 platform, offering a direct replacement or a stylistic upgrade to the 2018 facelift LED light signature. The result is a cleaner, more modern rear graphic — with no cutting, no rewiring, and no compromises to build quality. Constructed from impact-resistant ABS and optically clear polycarbonate, they're built to endure the same conditions your Sport handles every day. For owners looking to modernise the rear aesthetic of an early L494, or simply replace a damaged unit with something that performs and looks better than the original fitment, these lights represent a considered, high-value upgrade. Full LED operation means faster illumination response and longer service life compared to conventional halogen units — two qualities that matter whether you're on a motorway or a mountain pass. What's Included 🔴 Left LED Tail Light Driver-side assembly — LR116468 🔴 Right LED Tail Light Passenger-side assembly — LR116471 🔩 Mounting Hardware All necessary fixings for installation 📄 Installation Guide Basic fitting reference document Product Highlights Direct-fit replacement for Range Rover Sport L494 (2014–2020) — no modification required Emulates the 2018 facelift LED rear light signature for a modernised appearance Full LED construction across all functions — brake, tail, indicator, reverse Faster illumination response versus halogen for improved road safety ABS + polycarbonate construction resists impact, UV degradation and weathering 12V direct operation — plug-and-play with standard L494 wiring looms CCC certified — meets required electrical and safety standards Supplied as a matched pair — left and right included in every order Part references LR116468 (left) and LR116471 (right) for easy cross-referencing Lightweight at 3kg total — no impact on vehicle dynamics or boot access Compatibility Model Code Year Range Trim / Notes Fitment Range Rover Sport L494 2014–2017 Pre-facelift — upgrade to facelift style Direct Fit Range Rover Sport L494 2018–2020 Facelift — like-for-like replacement Direct Fit Range Rover Sport L461 2022–2026 New generation platform — different architecture Not Compatible Range Rover Vogue L405 2013–2021 Different body and mounting points Not Compatible Range Rover Velar L560 2017–2023 Distinct rear light architecture Not Compatible Defender L663 2020–2026 Entirely different platform and format Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–75 minutes  ·  Tools: Standard trim tools, T20 Torx driver Open the boot and locate the interior trim panel behind each tail light cluster — carefully remove it using a trim pry tool to avoid damaging the lining. Disconnect the factory wiring connector from the existing tail light assembly by pressing the release tab and pulling the plug clear. Remove the retaining nuts (typically T20 Torx) securing the light unit to the body — there are usually three or four per side. Carefully withdraw the original light assembly from the rear of the vehicle, taking care not to scratch the surrounding bodywork. Align the new LED tail light unit with the mounting studs, ensuring the weatherstrip seal sits flush against the body panel before tightening. Reconnect the wiring loom connector until it clicks firmly into place, then refit the interior trim panel. Before closing the boot, test all functions — brake, tail, indicator, and reverse — to confirm full operation on both sides. ⚠ Important: If your vehicle displays a bulb failure warning after installation, this may be due to the lower current draw of LED units versus the original halogen lamps. A load resistor or LED-compatible flasher relay may be required to resolve this. Professional installation is recommended if you are unfamiliar with automotive electrical systems. Upgrade Your Sport's Rear End The right lighting upgrade changes how your Range Rover Sport is perceived — day and night. Browse the full L494 accessory range or get in touch with our team if you have compatibility questions. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, authorised by, or in any way connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and part numbers referenced on this page are used solely for compatibility identification purposes. This product is an aftermarket part and is not a genuine Land Rover OEM component.

Victorious Automotive · Range Rover Evoque L538 · Interior Accessories Chrome Gear Knob Rhinestone Sticker for Range Rover Evoque L538 (2011–2016) A precision-cut rhinestone gear knob overlay that adds a refined chrome finish to your Evoque's centre console — fitted in under five minutes, no tools required. Evoque L538 2011–2016 Aluminium Alloy Rhinestone Crystal Chrome Finish Self-Adhesive 5-Min Fit Interior Upgrade Overview The Range Rover Evoque L538 is one of the most recognisable compact luxury SUVs on the road, celebrated for its sharp design language and premium interior appointments. For owners who want to push that interior one step further, the details matter — and few details are touched as frequently as the gear selector. This chrome rhinestone gear knob sticker is designed specifically to overlay the stock gear selector on the Evoque L538 (2011–2016), as well as compatible Jaguar and Land Rover models. Constructed from high-grade aluminium alloy set with crystal rhinestones, the overlay captures and reflects light beautifully, delivering a jewellery-grade focal point at the heart of your cabin without any permanent modification. Unlike bulkier aftermarket gear knobs that require tools, disassembly, or professional fitting, this sticker applies directly to your existing selector using high-strength adhesive. The result is a seamless, factory-looking enhancement that sits flush with the surrounding trim — elevating the overall cabin aesthetic without compromising the tactile feel of your gear changes. What's Included 💎 Rhinestone Gear Knob Overlay Pre-cut chrome aluminium alloy with crystal rhinestone inlay 🔧 Pre-Applied Adhesive Backing High-bond 3M-style adhesive — no extra glue needed 🧹 Cleaning Wipe Prep wipe for a clean bonding surface prior to application 📋 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-cut to match the Evoque L538 gear selector profile exactly High-grade aluminium alloy construction — lightweight yet durable Crystal rhinestone inlay delivers genuine sparkle under cabin lighting Chrome finish complements both silver and black interior colourways Strong adhesive backing ensures a secure, rattle-free bond No drilling, cutting, or permanent modification required Removable without damaging the original gear knob surface Compatible with multiple JLR platform vehicles from the same era Fits in under 5 minutes — no tools, no workshop time Ideal standalone upgrade or paired with other interior trim accessories Compatibility Vehicle Model Code Years Fitment Range Rover Evoque L538 2011–2016 Direct Fit Jaguar XF X250 / X260 2011–2016 Direct Fit Jaguar XJ X351 2011–2016 Direct Fit Jaguar XE X760 2015–2016 Direct Fit Land Rover Discovery Sport L550 2015–2016 Direct Fit Land Rover Discovery 4 L319 2009–2016 Direct Fit Range Rover Evoque L551 (2019+) 2019–Present Not Compatible Range Rover Sport L494 / L461 2014–Present Not Compatible Defender L663 2020–Present Not Compatible Installation Notes Difficulty: Very Easy  ·  Estimated Time: Under 5 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and gear selector is in Park (P) or Neutral. Use the included cleaning wipe to thoroughly clean the surface of the gear knob, removing any dust, oils, or residue. Allow to dry completely — approximately 60 seconds. Carefully peel the adhesive backing from the rhinestone overlay, taking care not to touch the adhesive surface. Align the overlay centrally over the gear knob, using the edges as a guide before pressing down. Take your time — positioning before contact is key. Press firmly across the entire surface for 20–30 seconds to activate the adhesive bond. Work from the centre outward to avoid air pockets. Allow 30 minutes of cure time before regular use to ensure full adhesion strength. ⚠ Note: Do not apply in temperatures below 10°C or above 40°C as this may affect adhesive performance. Avoid cleaning with harsh solvents or abrasive cloths around the overlay once fitted, as this may loosen the adhesive bond over time. If removing the overlay, use a plastic pry tool and gentle heat from a hair dryer to soften the adhesive — never force it. Elevate Every Gear Change Small details define great interiors. This rhinestone gear knob sticker is one of the quickest and most satisfying upgrades you can make to your Evoque's cabin — and it ships worldwide via DHL, FedEx, UPS, and TNT. Shop All Evoque Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Carbon Fibre & Wood Paint Interior Trim Upgrade — Range Rover Evoque 2015–2018 A precision-engineered 5-piece ABS trim set that transforms the Evoque's front middle console and air vent surrounds with a striking carbon fibre and wood paint finish — no drilling, no tools, no compromise. Range Rover Evoque L538 2015–2018 ABS Carbon Fibre Wood Paint 5-Piece Set Interior Trim Air Vent Surround 3M Adhesive Install Waterproof Direct Fit Overview The Range Rover Evoque L538 — produced from 2011 through to 2018 — established itself as one of the most design-forward compact SUVs ever built. From its sloping roofline to its sculpted flanks, the Evoque wore its premium credentials with confidence. Inside, however, the interior trim of the 2015–2018 model years can begin to feel familiar to the discerning owner who expects more from their cabin environment. This 5-piece carbon fibre and wood paint interior trim kit addresses exactly that. Designed specifically for the 2015–2018 Evoque, the set covers the front middle console side panels and air vent surrounds — the highest-visibility surfaces in the cabin. Manufactured from high-quality ABS plastic and finished in a dual-texture carbon fibre and wood paint effect, each piece adds visual depth and tactile richness to the interior without any permanent modification to the vehicle. Installation is entirely tool-free. Each trim panel arrives pre-fitted with 3M automotive-grade double-sided tape on the reverse, allowing for a clean, secure and permanent bond to the factory surface. The result is a cabin that feels considered, elevated and distinctly personal — exactly what Evoque ownership should feel like. What's Included 🪟 Left Air Vent Surround Front centre console, left side trim panel 🪟 Right Air Vent Surround Front centre console, right side trim panel 🔲 Centre Console Side Panel (Left) Middle console lateral trim, driver side 🔲 Centre Console Side Panel (Right) Middle console lateral trim, passenger side 🎛️ Central Fascia Accent Trim Front middle surround accent panel Product Highlights Precision-cut to match OEM Evoque 2015–2018 panel geometry exactly High-quality ABS construction — rigid, lightweight and durable Carbon fibre and wood paint dual-effect finish for visual depth Pre-applied 3M automotive double-sided tape on every piece Completely tool-free installation — no drilling or cutting required Waterproof finish — resistant to spills, humidity and UV exposure Fade-resistant surface coating — maintains finish long-term Anti-rust ABS base material — no corrosion risk over time Quality-inspected before dispatch — 100% brand new, unused Complete 5-piece set covers all key visible centre trim areas Compatibility Vehicle Generation Year Range Fitment Range Rover Evoque L538 (Facelift) 2015–2018 Direct Fit Range Rover Evoque L538 (Pre-Facelift) 2011–2014 Not Confirmed Range Rover Evoque L551 (Second Gen) 2019–2025 Not Compatible Range Rover Velar L560 2017–2025 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 minutes  |  🔧 Tools Required: None Prepare the surface. Thoroughly clean each factory trim panel with a dry microfibre cloth. Ensure all surfaces are completely free from dust, grease, oils and wax residue before proceeding. Dry-fit each piece. Before committing to adhesion, hold each trim panel in position to confirm correct placement and alignment against the factory panel geometry. Peel and position. Remove the protective film from the pre-applied 3M automotive tape on the reverse of each trim piece. Carefully align the trim in its intended position and press firmly and evenly across the full surface for 30–60 seconds to ensure a strong initial bond. Repeat for all 5 pieces. Work systematically from one side to the other, ensuring each piece is seated flush and level before moving to the next. Allow to cure. Do not disturb the trim, clean the interior, or expose the surfaces to excessive heat or moisture for a minimum of 24 hours after installation. ⚠ Installation Note: For best adhesion, ensure the interior cabin temperature is above 15°C at time of installation. Cold temperatures can reduce the initial tack of the 3M adhesive. Warming the panel surface gently with a heat gun on a low setting can improve bonding in cooler environments. Elevate Every Journey The Evoque deserves an interior that matches its exterior ambition. Browse the full Range Rover Evoque L538 collection at Victorious Automotive and discover the upgrades your cabin has been waiting for. Shop Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or in any way connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration prior to purchase.

Victorious Automotive · Range Rover Evoque · Interior Trim Range Rover Evoque 3D Carbon Fibre Interior Centre Console Sticker Decal Set A precision-cut set of 3D carbon fibre stickers designed to transform the interior trim of the Range Rover Evoque — delivering a sport-premium aesthetic with a clean, factory-finished look and zero permanent modification. Range Rover Evoque L538 Range Rover Evoque L551 3D Carbon Fibre Interior Trim Centre Console No Drilling Self-Adhesive Waterproof Heat Resistant Overview The Range Rover Evoque has always struck a balance between urban elegance and genuine capability — an SUV that looks as refined parked on a Mayfair street as it does on a weekend trail. Its interior is a key part of that identity, and for Evoque owners who want to push that aesthetic further, the centre console and surrounding trim panels are an ideal starting point. This 3D carbon fibre interior sticker set is engineered to fit the Evoque's cabin geometry precisely, covering the centre console and key interior trim zones with a textured, multi-dimensional carbon fibre finish. Unlike flat vinyl wraps, the material uses a gas-venting groove construction that conforms naturally to curved and contoured surfaces — allowing it to sit flush against the trim without lifting at the edges or trapping air beneath. The adhesive backing is strong enough to hold permanently through heat, humidity, and vibration, yet the stickers can be cleanly removed without leaving residue or damaging the original surface beneath. For Evoque owners who want a bolder, sportier interior without committing to permanent modification, this set delivers a genuinely impressive result. What's Included 🧩 Full Interior Sticker Set 1 complete set covering centre console and key trim zones 🎴 3D Carbon Fibre Film Gas-venting groove texture membrane for contour conformity 📐 Pre-Cut Panels Precisely cut to match Evoque interior trim profiles 📋 Installation Guide Step-by-step application instructions included Product Highlights Brand new, never fitted — 100% unused condition 3D gas-venting groove carbon fibre membrane material Conforms to curved and contoured interior trim surfaces Waterproof construction — safe in humid and wet conditions UV-resistant and sunscreen treated for long-term colour stability High-temperature tolerant — safe across typical cabin heat ranges High-tensile adhesive leaves zero marks upon removal Does not damage original trim paint or surface finish Withstands high-pressure water rinsing without lifting Moderate thickness — perfect fitment and straightforward installation Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 (1st Gen) 2011–2018 Direct Fit Range Rover Evoque L538 (Facelift) 2019–2023 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2025 Direct Fit Range Rover Velar L560 2017–2025 Not Confirmed Range Rover Sport L494 / L461 2013–2025 Not Compatible Defender L663 2020–2025 Not Compatible Unsure about your specific model year or trim level? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes Difficulty: Easy  ·  Estimated Time: 30–60 minutes  ·  Tools Required: None (hair dryer recommended) Thoroughly clean the interior trim surfaces to be covered and lightly mist with water to allow for initial position adjustment. Lightly mist the adhesive side of the carbon fibre sticker panel before application — this allows you to reposition before committing to final placement. Starting from one edge, work the sticker inward, pressing from the outside edges toward the centre to avoid trapping air. Align critical reference points — such as switch cutouts or trim seams — first, then work outward to the surrounding areas. Use a soft cloth or squeegee to smooth the sticker firmly and flush against the trim surface, removing any remaining air pockets. Use a hair dryer or heat gun on a low setting to warm any curved corners or edges, then press firmly to ensure a permanent, docile bond. Note: Allow 24 hours before exposing the installation to significant moisture or temperature extremes. Do not stretch the film excessively over deep contours — heat application makes conforming to curves significantly easier. Explore the Full Evoque Collection Browse our complete range of interior and exterior accessories for the Range Rover Evoque — from trim upgrades and storage solutions to protection accessories and styling kits. Shop Range Rover Evoque L538 → Shop Range Rover Evoque L551 → Buying two or more items? Use code at checkout for 20% off: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of describing product fitment compatibility.

Victorious Automotive · Range Rover · Rear Entertainment 11.8" Android Rear Entertainment Screens for Land Rover Range Rover A matched pair of ultra-thin 11.8" Full HD Android 12 headrest screens — pre-loaded with a Land Rover interface theme, ready for Netflix, YouTube, and more via a simple 12V connection. L405 · L460 · L461 · L494 Android 12 11.8" Full HD IPS Sold as a Pair Google Play Store WiFi + Bluetooth Plug-and-Play 12V Aluminium Alloy Body Overview The Range Rover cabin is engineered around comfort — and for rear passengers, that expectation extends well beyond legroom. Whether you're covering motorway miles, heading to an airport, or keeping younger passengers occupied on longer journeys, the back of a Range Rover deserves entertainment that's genuinely worthy of the vehicle around it. These 11.8" Android Rear Entertainment Screens are built specifically for that brief. Running Android 12 with the full Google Play Store, they put Netflix, Prime Video, YouTube, Spotify, games, and more directly in front of rear passengers — on a cinema-quality 1920×1280 IPS display with a 2.5D curved aluminium alloy body that sits cleanly and confidently behind the front headrests. The pre-installed Land Rover interface theme ensures nothing about the experience looks or feels out of place inside a premium cabin. Connectivity options are comprehensive: built-in WiFi, 3G/4G dongle support, Bluetooth audio output, FM transmission, IR headset compatibility, and a 3.5mm audio jack give each passenger complete individual control. Power runs from any 12V source, and mounting brackets slip over existing headrest posts — no drilling, no permanent modifications, no specialist tools. Fit both screens in under an hour and transform every rear seat into something significantly more engaging. What's Included 📺 11.8" IPS Screens × 2 Full HD 1920×1280, Android 12, pre-paired as a set 🔧 Adjustable Mounting Brackets × 2 Headrest post mount, height-adjustable, tool-free fit 🔌 12V Power Cables & Hardware Full power connection accessories for both screens 📶 3G/4G Dongle Support Stream via phone hotspot or USB mobile data dongle 📄 Installation Guide Step-by-step printed setup instructions included Product Highlights 11.8" IPS Full HD display — 1920×1280 resolution, 15:10 aspect ratio for immersive viewing Android 12 OS with full Google Play Store access — Netflix, YouTube, Spotify and more Pre-installed Land Rover interface theme for a seamless, factory-consistent cabin feel Ultra-thin 2.5D curved aluminium alloy body — premium finish, minimal visual intrusion Built-in WiFi and 3G/4G dongle support — stream on the move without a separate device Bluetooth audio, FM transmission, 3.5mm jack, IR headset, and 2W built-in stereo speakers USB and SD card support with 1080p and 4K video decoding for offline media playback Smart ambient light sensor — display brightness auto-adjusts to cabin and external light Quad-Core ARM Cortex-A53, 1.5GB RAM, 8GB ROM — responsive, fluid everyday performance Sold as a matched pair — one dedicated full-featured screen per rear passenger seat Tech Specifications Operating System Android 12.0 Display 11.8" IPS, 1920×1280, 15:10 aspect ratio Processor Quad-Core ARM Cortex-A53 RAM / Storage 1.5GB RAM / 8GB ROM External Storage SD card support up to 128GB Connectivity WiFi, 3G/4G dongle (USB), Bluetooth, AV In/Out Audio Output Built-in 2W stereo speakers, 3.5mm jack, FM, IR headset, Bluetooth Power Input 12V DC Body Material Aluminium alloy, 2.5D curved glass Video Decoding 1080p Full HD / 4K supported Languages English, French, Spanish, German, Chinese, Japanese, Russian, Portuguese & more Quantity Sold as a pair (× 2 screens) Compatibility Model Generation Years Fitment Range Rover Vogue L405 2013–2021 ✓ Compatible Range Rover Sport L494 2013–2021 ✓ Compatible Range Rover Vogue L460 2022–2026 ✓ Compatible Range Rover Sport L461 2022–2026 ✓ Compatible Range Rover Evoque L538 2012–2018 ✓ Compatible Range Rover Evoque L551 2019–2026 ✓ Compatible Range Rover Velar L560 2018–2024 ✓ Compatible Land Rover Discovery 5 L462 2017–2026 ✓ Compatible Land Rover Defender L663 2020–2026 ⚠ Verify Headrest Type Mounting brackets are designed for standard dual-post headrest configurations. Compatible across all listed models and trim levels including SE, HSE, Autobiography, and SVR/SV. If you are unsure whether your specific vehicle or seat configuration qualifies, call our team on +44 203 943 9919 before ordering. Installation Notes ⚡ Easy  ·  30–60 Minutes  ·  No Special Tools Required Remove the front headrests. Lift both front seat headrests straight up and out of their guide posts. The mounting brackets will fit over these same posts — no modification to the seat, frame, or trim is required. Attach the mounting brackets. Slide the adjustable mounting brackets down over the headrest guide posts. Set the height so the screen will sit at a comfortable eye level for rear passengers, then tighten the thumbscrews firmly to lock the bracket in position. Mount the screens. Clip each screen unit onto its respective bracket. Use the bracket arm pivot to angle each display face toward the rear passenger for an optimal viewing position — typically a slight downward tilt works best. Refit the headrests. Slide the front headrests back into their guide posts above the brackets. The bracket body sits cleanly between the seat back and headrest with no interference to height adjustment or safety function. Connect the power. Route the supplied 12V power cable to the nearest available power source. The rear 12V socket is the simplest connection point. For a cleaner finish, the cable can be routed discreetly through the seat base gap or along the sill trim. Connect to WiFi and complete setup. Power on both screens, connect to your phone hotspot, in-car WiFi, or 4G dongle, sign into a Google account, and install your chosen apps directly from the Play Store. Both screens operate independently. Note: For a fully concealed cable run with no visible wiring, we recommend having a car audio or accessories specialist route the power feed through the seat base or door sill trim. This typically takes under 30 minutes and gives the installation a completely factory-fitted appearance. Every Journey. First Class. Whether it's the school run, a cross-country drive, or an airport transfer in the dark — rear passengers deserve an experience that genuinely matches the vehicle they're riding in. These screens deliver exactly that, without a single compromise to the cabin's premium look or feel. Backed by a 30-day money-back guarantee, 4.9★ from 12,300+ verified reviews, and worldwide shipping via DHL, FedEx, UPS, and TNT. Shop the Full Range Rover Collection → Use code 22GET20 for 20% off any two items ⭐ 4.9/5 · 12,300+ reviews 🚚 Worldwide shipping · DHL, FedEx, UPS, TNT ↩️ 30-day money-back guarantee 📞 Expert advice Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited, or any of their subsidiaries. All vehicle model names, codes, and designations are referenced solely for product fitment identification purposes. Android and Google Play are trademarks of Google LLC. Netflix, YouTube, Spotify, Prime Video, and all other referenced app or service names are trademarks of their respective owners. App availability is subject to individual account and subscription requirements. Screen images shown are for illustration purposes only.

Victorious Automotive · Range Rover / Evoque / Discovery · Key Protection Leather Key Cover – Range Rover, Evoque & Discovery 2010–2012 Remote Fob Case A precision-stitched genuine leather key cover purpose-built for the 2010-style Land Rover remote fob — keeping your key electronics shielded and your interior presence unmistakably premium. 2010–2012 Key Style Genuine Leather Range Rover Evoque L538 Discovery 4 4 Colour Options Snap-Fit Install Anti-Peel Protection Worldwide Shipping Overview The 2010-generation Land Rover key fob is a known weak point across the Range Rover, Evoque, and Discovery 4 lineup. The factory plastic shell is prone to cracking, peeling, and splitting — often well before the vehicle shows any signs of age. For owners who take pride in their vehicles' condition inside and out, a deteriorating key in the hand is simply not acceptable. This leather key cover wraps your existing fob in a durable, soft-grain leather shell that not only prevents the dreaded plastic peel but actively absorbs everyday impact from drops and spills. Four colour options allow you to coordinate with your interior trim or express your own character — whether that's understated black or something more distinctive. Unlike cheap silicone alternatives that trap moisture and attract lint, this leather case breathes naturally, ages well, and adds genuine tactile quality every time you reach for your keys. It's a small detail — but for Land Rover owners, the details are everything. What's Included 🔑 Leather Key Cover Soft-grain leather shell, snap-fit design for 2010-style fob 🎨 Colour Choice Available in four distinct colourways — selected at checkout 📦 Protective Packaging Safely packaged for worldwide transit via DHL, FedEx, UPS, or TNT 📋 Fitting Guide Simple no-tools installation — ready to fit in under a minute Product Highlights Precision-fit for the 2010–2012 Land Rover remote fob shell Genuine soft-grain leather construction — durable and tactile Prevents the common factory plastic split and peel issue Protects key electronics from drops, spills, and daily wear Available in four colour options to suit any style preference Snap-fit design — no tools, no adhesives, no modification required Slim-profile cover that doesn't bulk up your pocket or bag All buttons and functions remain fully accessible through the cover Compatible across Range Rover, Evoque, and Discovery 4 variants Immediate upgrade to the look and feel of your everyday carry Vehicle Compatibility Vehicle Code / Generation Year Range Fitment Range Rover Vogue L322 2010–2012 Direct Fit Range Rover Sport L320 2010–2013 Direct Fit Range Rover Evoque L538 2011–2012 Direct Fit Land Rover Discovery 4 L319 2010–2012 Direct Fit Land Rover Freelander 2 L359 2010–2012 Direct Fit Range Rover Sport L494 (2013+) 2013–2020 Not Compatible Range Rover Vogue L405 (2013+) 2013–2020 Not Compatible Land Rover Defender L663 (2020+) 2020–2026 Not Compatible Range Rover Evoque L551 (2019+) 2019–2026 Not Compatible Land Rover Discovery 5 L462 2017–2026 Not Compatible Not sure if this fits your key style? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm before you order. Installation Notes ⏱ Difficulty: Easy  ·  Time: Under 1 Minute  ·  Tools Required: None Remove your Land Rover key fob from any existing keyring or case. Select your preferred colour cover from the four available options at checkout. Align the leather cover with the front face of your key fob, ensuring the button cutouts are correctly positioned. Press the cover firmly around the edges until the snap-fit clips engage securely on all sides. Test all buttons — lock, unlock, boot release — to confirm full functionality is retained. Reattach your keyring through the leather loop and you're ready to go. ⚠ Note: This cover is designed specifically for the 2010-style Land Rover flip-and-press remote fob. If your key uses a blade-style insert or a proximity-only smart card, please check compatibility with our team before ordering. Do not force the cover onto an incompatible fob as this may cause damage. Protect Your Key. Elevate Every Detail. Your Land Rover deserves more than a cracked, peeling key fob. This leather cover is a simple, considered upgrade that costs very little and delivers every single day — in the hand, in the ignition, and in the eyes of anyone who notices. Shop More Key & Interior Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue L405 · Body Kits SVO-Style Full Body Kit – Range Rover Vogue L405 (2014–2017) A complete front-to-rear aerodynamic transformation for the L405 Vogue, engineered in OEM-grade polypropylene to deliver the commanding SVO aesthetic your Range Rover deserves. Range Rover Vogue L405 2014–2017 SVO Style PP Polypropylene Full Body Kit Front & Rear Bumpers Door Trim Front Grille Direct Fit 20kg Overview The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that balances commanding road presence with refined British engineering. For owners who want to push that presence further without compromising the vehicle's purity of line, the SVO-style body kit offers a factory-coherent upgrade that reads as intentional rather than aftermarket. This full kit has been developed specifically for the 2014–2017 L405 Vogue facelift generation, covering every major exterior panel zone from the front bumper assembly through to the rear valance. The material specification mirrors that used by Land Rover on original bumpers — injection-moulded polypropylene — meaning fitment tolerances, flex characteristics, and paint adhesion all behave exactly as expected on a vehicle of this calibre. What distinguishes the SVO aesthetic is its restraint. Lower front air intakes are reshaped for improved visual mass. The rear diffuser gains definition. The grille surround sharpens the nose. Taken together, the kit doesn't shout — it focuses the L405's proportions into something more purposeful, more athletic, and undeniably more striking. What's Included 🔲 Front Bumper Assembly SVO-style lower fascia with integrated air intake reshaping and mounting hardware 🔳 Rear Bumper Assembly Redesigned rear lower valance with diffuser-style detail and all fixing accessories ⬛ Front Grille Surround SVO-spec grille frame with sharper profile and refined mesh integration 🟦 Door Trim Mouldings Side body lower trim panels for a cohesive full-perimeter transformation 🔩 Fitting Accessories Kit Clips, fasteners, and hardware required for clean OEM-style installation Product Highlights Precision-engineered for 2014–2017 Range Rover Vogue L405 — no cutting or modification required OEM-grade PP polypropylene — the same material used by Land Rover on original bumper assemblies SVO-inspired design language that complements the L405's factory proportions Lightweight at just 20kg for the complete kit — no adverse effect on vehicle dynamics or fuel economy Full front-to-rear coverage: bumpers, grille, door trim, and accessories in a single package Paintable surface finish — accepts standard automotive primer and topcoat for a factory-matched result Matching flex characteristics to original components — no cracking or stress fractures at panel joins Designed for direct bolt-on fitment using existing factory mounting points and fixings Ships fully protected in custom-formed packaging to prevent transit damage to panel surfaces Available with worldwide shipping via DHL, FedEx, UPS, and TNT to over 100 countries Compatibility Vehicle Model Code Year Range Trim Level Fitment Range Rover Vogue L405 2014–2017 Vogue / SE / Autobiography Direct Fit Range Rover Vogue L405 2013 Pre-facelift variants Verify Before Order Range Rover Vogue L405 2018–2021 Post-facelift variants Not Compatible Range Rover Vogue L460 2022–2026 All trims Not Compatible Range Rover Sport L494 2013–2022 All trims Not Compatible Range Rover Evoque L538 / L551 All years All trims Not Compatible Installation Notes Difficulty: Intermediate  ·  Estimated Time: 4–8 Hours  ·  Professional Fit Recommended Before beginning, dry-fit all panels against your vehicle to confirm alignment and identify any panel-specific adjustments needed prior to painting. Remove existing front and rear bumper assemblies, grille surround, and door trim mouldings using appropriate trim removal tools — retain all factory clips and fixings where possible. Clean, prime, and paint all new panels in your chosen colour match using a quality automotive primer and basecoat/lacquer system. Allow full cure time before fitting. Refit the front bumper assembly using existing factory mounting points. Ensure all tab locations align before applying final fixing torque. Reconnect any fog light or sensor wiring looms. Install the front grille surround, clipping into the front bumper carrier and bonnet lower edge as per the original fitment method. Fit door trim mouldings panel by panel, working front to rear, ensuring each clip locates fully before moving to the next section. Install the rear bumper assembly, reconnecting any parking sensor harnesses or tow bar components as applicable. Confirm panel gaps are even before finalising all fixings. Conduct a final visual inspection at eye level on all four sides to confirm panel alignment, consistent shut lines, and secure fitting throughout. ⚠ Important: If your vehicle is fitted with front or rear parking sensors, tow bar electrics, or active air suspension components behind the bumper, we strongly recommend professional installation to ensure all systems are correctly reconnected and remain fully operational. Painting should be completed before fitment — do not attempt to paint panels in situ. Elevate Your L405 Vogue Every detail of this SVO-style kit has been considered for owners who refuse to compromise. Explore the full Range Rover Vogue L405 accessory collection — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like guidance before ordering. Shop Range Rover Vogue L405 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification before ordering. Professional installation is recommended for all bodywork components.

```html Victorious · Porsche · Key Accessories Porsche 2pc Car Remote Key Case – Premium Key Covers Durable plastic key covers engineered to protect and enhance your Porsche remote control. Porsche 911 / Panamera / Cayenne Plastic 2-Piece Set 2017+ Overview Your Porsche key remote deserves protection as refined as the vehicle it controls. This 2-piece key case set is engineered for Porsche Panamera, Carman, Macann, Bobst, Cayenne, 911, and all modern Porsche models (970, 981, 991, 92A and beyond). Manufactured from durable, high-impact plastic, these key covers shield your remote from daily wear, scratches, and accidental drops while maintaining a sleek, OEM-inspired profile. The two-piece design fits seamlessly over standard Porsche remote fobs, adding a layer of protection without compromising comfort or functionality. Whether you're protecting your daily driver or your weekend icon, these covers deliver practical durability at an accessible price point. Worldwide shipping means your keys stay protected, wherever your Porsche takes you. What's Included 🔑 2x Key Covers One pair, dual protection ✓ Universal Fit Design Compatible with listed models 📦 Worldwide Shipping DHL, FedEx, UPS, TNT 🛡️ 30-Day Money-Back Guaranteed satisfaction Product Highlights Precision molded for Porsche remote fobs High-impact plastic construction Scratch and impact resistant Two-piece protective set Maintains button functionality Lightweight, ergonomic design Compatible with 2017+ models Easy on, easy off installation Suits Panamera, Cayenne, 911, and more Professional aesthetics maintained Compatibility Model Year Range Status Porsche Panamera 2017+ Direct Fit Porsche Cayenne 2017+ Direct Fit Porsche 911 2017+ Direct Fit Porsche Carman / Macann 2017+ Direct Fit Porsche Bobst 2017+ Direct Fit Porsche 970, 981, 991, 92A 2017+ Direct Fit Pre-2017 Porsche Models Pre-2017 Check Fitment Installation Notes Difficulty: Minimal | Time: 2 Minutes Remove your Porsche remote key fob from your pocket or bag. Align the first plastic cover half with the remote's profile. Gently slide or snap the first half onto the fob. Attach the second cover half, ensuring full closure around the remote. Test button responsiveness — all functions should operate normally. Your keys are now protected. Repeat with additional remotes as needed. Note: These covers are designed to be removable. If you need to access the battery or internal components, gently pry the halves apart — no tools required. Protect Your Porsche Key Today Durable, affordable, and engineered for Porsche owners who demand both protection and style. Your remote deserves the same care as your vehicle. Shop Now Use code 22GET20 for 20% off any 2 items 4.9★ / 5 – 12,300+ Reviews 30-Day Money Back Worldwide Shipping 📞 +44 203 943 9919 Victorious Automotive is an independent automotive accessories retailer. We are not affiliated with, endorsed by, or connected to Porsche AG, Porsche Cars North America, or Jaguar Land Rover Limited. All trademarks and model designations are the property of their respective owners. Product compatibility information is provided for reference only — please verify fitment with your specific vehicle before purchase. ```

Victorious Automotive · Range Rover Sport L494 · Interior Trim Silver & Gold Crystal Door Speaker Cover Trim — Range Rover Sport L494 2014–2015 Transform your Sport's interior door panels with precision-fit crystal-embellished speaker cover trims, available in polished silver and gold finishes for an elevated cabin presence. Range Rover Sport L494 2014–2015 Chrome Base Crystal Accents Silver & Gold Adhesive Fit Interior Trim No Drilling Required Overview The Range Rover Sport L494 arrived with one of the most driver-focused interiors Land Rover had produced — a cockpit-style cabin defined by its layered trim surfaces, sculpted door cards, and carefully considered detailing. For owners of the 2014 and 2015 model years, the speaker grilles integrated into the door panels represent one of the most visible interior touchpoints, and one that responds exceptionally well to considered upgrades. These door speaker cover trims are designed as a direct-fit enhancement for the L494 Sport, featuring a chrome base adorned with hand-placed crystal embellishments that catch and reflect light with every journey. Available in two distinct finish options — refined silver and warm gold — they allow owners to complement the existing interior palette, whether that's the cooler, contemporary feel of an Ebony or Ivory cabin or the richer tones of a Tan or Espresso interior. Installation requires no tools, no drilling, and no modifications to your vehicle's door cards. Pre-applied adhesive tape seats each cover securely over the existing grille, delivering a factory-quality result in under two minutes. It's the kind of detail that quietly elevates the whole cabin without announcing itself — precisely the approach Range Rover interiors reward. What's Included 🔷 Door Speaker Cover Trims × 2 One pair — fits both front door speaker grilles 🩹 Pre-Applied Adhesive Tape Industrial-grade 3M-style tape pre-fitted to each cover 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-fit design engineered for the L494 Range Rover Sport door panels Crystal embellishments add a jewellery-grade detail to the interior Available in polished silver and warm gold chrome finishes Chrome base construction for a durable, premium surface quality Pre-applied adhesive tape for a clean, tool-free installation No drilling, cutting, or door card removal required Installs in under two minutes per cover Reversible fitment — removes cleanly without residue damage Compatible with both left and right-hand drive Sport variants Complements factory interior colour palettes across all 2014–2015 trim grades Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2014–2015 Direct Fit Range Rover Sport L494 2013 Verify Before Purchase Range Rover Sport L494 2016–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  |  🔧 Difficulty: Very Easy  |  🛠 Tools Required: None Ensure the door panel surface around the speaker grille is clean, dry, and free from dust, oils, or wax residue. A quick wipe with isopropyl alcohol ensures maximum adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse of each speaker cover trim. Align the trim over the existing speaker grille, taking care to centre the cover accurately before making contact with the panel surface. Press firmly and evenly around the perimeter of the trim for 20–30 seconds to activate the adhesive bond. Repeat for the second door. Allow 30–60 minutes before exposing to moisture or temperature extremes for a full cure. ⚠ Note: Please confirm your exact vehicle model year before purchasing. Door panel grille profiles may vary between early and late L494 production runs. If you are unsure of compatibility, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Complete the Detail These speaker trims are one part of a wider interior upgrade story for the L494 Sport. Explore our full Range Rover Sport L494 collection for complementary trim pieces, gear selector surrounds, and dashboard accents — all designed to work together. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Silver & Gold Gear Shift Button Cover Trim for Range Rover Vogue & Sport (2014–2023) A precision-fit chrome and Swarovski-style diamond accent trim that transforms your gear selector area into a genuine focal point of your Range Rover's cabin — installed in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2023 Chrome Finish Swarovski-Style Accents Silver & Gold Adhesive Fit Interior Trim Gear Shift Cover Overview The Range Rover Vogue L405 and Sport L494 occupy a class of their own — vehicles where interior quality is scrutinised as closely as on-road performance. From 2014 through to the 2023 model year, both platforms share a cabin language built around layered surfaces, contrast detailing, and restrained luxury. It's a space where even the smallest upgrade, placed correctly, can feel completely factory-intended. This Gear Shift Button Cover Trim is designed precisely for that philosophy. Finished in polished chrome with Swarovski-style crystal accents, it overlays your existing gear selector button surround and immediately elevates the visual weight of the centre console area. Available in both silver and gold finishes, it complements dark interior colourways and contrasts beautifully against lighter leathers — giving owners a genuine choice of character rather than a single forced aesthetic. The trim is constructed from high-grade chrome-plated material that resists fingerprints and maintains its lustre over time. Pre-applied adhesive tape on the reverse face means fitment is clean, repeatable, and completely reversible — no drilling, no cutting, no risk to your vehicle's original surfaces. For owners who want a more bespoke interior without committing to a full retrofit, this is one of the most impactful single-piece upgrades available. What's Included ⚙️ Gear Shift Button Cover Trim One-piece chrome unit with Swarovski-style accents — silver or gold finish as selected 🔧 Pre-Applied Adhesive Tape Factory-bonded to the reverse face — no separate adhesive preparation required 📄 Fitment Guide Step-by-step instructions for a clean, confident installation Product Highlights Precision-designed to fit the gear selector button surround of L405 Vogue and L494 Sport models from 2014–2023 Available in polished silver chrome and warm gold chrome — both complementary to OEM interior palettes Swarovski-style crystal diamond detailing adds tactile depth and genuine sparkle to the centre console High-grade chrome-plated construction resists tarnishing, smudging, and daily wear Pre-applied automotive-grade adhesive tape ensures a secure, vibration-resistant bond No tools, no drilling, no permanent modification — fully reversible installation Installed in under two minutes — a genuine weekend upgrade with lasting visual impact One-piece design sits flush against the OEM surface with no visible gaps or proud edges Enhances the perceived quality of the centre console without altering button function Pairs naturally with other chrome interior trim upgrades for a cohesive, elevated cabin aesthetic Compatibility Model Code Years Compatibility Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2026 Not Compatible Unsure about your specific model year or build? Call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes 🛠 Difficulty: Very Easy  ·  ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Tools Required: None Thoroughly clean the existing gear shift button surround using an isopropyl alcohol wipe or a lint-free cloth. Ensure the surface is fully dry before proceeding — any residue or moisture will affect adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse face of the trim piece. Handle the chrome face carefully to avoid fingerprints. Align the trim piece carefully over the gear selector button surround, confirming the orientation matches before contact is made. Apply firm, even pressure across the entire surface for 30–60 seconds, working from the centre outward to eliminate any air pockets beneath the trim. Allow the adhesive to cure for at least one hour before exposing the area to direct sunlight or elevated cabin temperatures. ⚠ Important: Do not apply to surfaces that are damp, freshly conditioned with leather products, or recently cleaned with silicone-based dressings. These will prevent the adhesive from bonding correctly. If you need to reposition the trim, do so gently and immediately — once fully cured, repositioning may reduce bond strength. Elevate Every Detail At Victorious Automotive, we believe the interior of your Range Rover should reflect the same standard of finish as the exterior. This gear shift trim is a small change with a disproportionate visual return — and it's backed by our 30-day money-back guarantee. Shop All Range Rover Vogue Accessories Shop All Range Rover Sport Accessories Buying two items? Use code 22GET20 at checkout for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Swarovski® is a registered trademark of Swarovski AG — crystal-style accents included with this product are decorative aftermarket elements and are not manufactured by or affiliated with Swarovski AG.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Silver & Gold Door Window Switch Frame Trim for Range Rover Vogue L405 & Range Rover Sport L494 (2013–2021) Crystal-embellished door switch frame trims that bring Swarovski-style sparkle and bespoke character to your Range Rover's interior in under two minutes. Range Rover Vogue L405 Range Rover Sport L494 2013–2021 Silver & Gold Swarovski-Style Crystals Chrome Accents 4-Piece Set No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent two of the most respected luxury SUVs ever produced — cabins defined by clean lines, premium materials, and a sense of composed sophistication. For owners who want to take that interior aesthetic one step further, the door window switch surrounds are a subtle but immediately visible canvas for personalisation. These door window switch frame trims are precision-cut to sit flush over the existing switch panels on all four doors, replacing the factory-finish surround with a statement piece finished in your choice of Silver or Gold. Each trim is studded with Swarovski-style crystals and framed with chrome detailing — delivering a diamond-cut sparkle that catches the light beautifully without overwhelming the cabin's original character. The appeal here is in the detail. Whether you're stepping into your Vogue after a long day or chauffeuring guests in your Sport, these trims communicate care and individuality. They fit using pre-applied adhesive backing, meaning installation requires no tools, no drilling, and no specialist knowledge — just a clean surface and two minutes of your time. What's Included 💎 Front Left Door Trim Crystal & chrome switch frame surround 💎 Front Right Door Trim Crystal & chrome switch frame surround 💎 Rear Left Door Trim Crystal & chrome switch frame surround 💎 Rear Right Door Trim Crystal & chrome switch frame surround 🔧 Pre-Applied Adhesive 3M-style backing — no tools required 📋 Fitting Instructions Step-by-step guide included in packaging Product Highlights Precision-cut to match L405 Vogue and L494 Sport door switch panel geometry exactly Available in Silver and Gold finishes to complement both light and dark interior colourways Swarovski-style crystal embellishments for genuine luxury sparkle Chrome and diamond-cut detailing frames each trim for added visual depth Pre-applied adhesive backing means zero tools and zero damage to factory panels Full four-door coverage in a single set — front and rear doors included Slim profile sits flush to the door card surface without any unsightly gaps Durable construction resists daily contact, UV light, and interior temperature fluctuations Reversible upgrade — trims can be removed without leaving residue on factory panels Installation takes under two minutes per door — complete the full set in one go Compatibility Model Code Year Range Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 5–10 minutes (full set) Start with a clean, dry interior. Use an isopropyl alcohol wipe to degrease the existing door switch frame surround on each door — this ensures maximum adhesive bond. Unwrap each trim piece and identify which piece corresponds to each door (front left, front right, rear left, rear right). Test the fit dry before peeling the adhesive backing. Peel the protective film from the adhesive backing on the first trim piece. Align the trim carefully over the switch surround, starting from one edge and pressing down gradually to avoid air bubbles. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond fully. Repeat for all four doors. Allow 30 minutes for the adhesive to fully cure before operating the windows repeatedly. ⚠ Important: Please verify your vehicle's model code (L405 or L494) and model year before ordering. Switch panel geometry changed significantly with the 2022 model year refresh on both the Vogue (L460) and Sport (L461). This product is not compatible with 2022 and newer variants. Elevate Every Detail At Victorious Automotive, we believe the finest Range Rovers are defined by the details their owners choose. These door switch frame trims are a simple, reversible, and genuinely beautiful upgrade for any L405 or L494 interior. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Buying 2 or more items? Use code 22GET20 for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG; this product uses Swarovski-style crystals and is not affiliated with or endorsed by Swarovski AG.

Automotive · Porsche · Interior Styling Carbon Fiber Color Fob Remote Key Case Shell for Porsche Premium carbon fiber finish key fob replacement—authentic styling upgrade for 911, Boxster, Cayman, Panamera, Cayenne, and Macan models. Porsche Multi-Model Carbon Fiber Key Fob Shell Premium Finish Direct Fit Overview Whether you drive a Porsche 911 Carrera, Boxster, Cayman, Panamera, Cayenne, or Macan, your key fob is an extension of your vehicle's design language. This carbon fiber color key case shell delivers an instant aesthetic upgrade—transforming a standard plastic fob into a luxury-finish accent that complements your Porsche's engineering and attention to detail. Crafted from durable plastic with a convincing carbon fiber weave texture, this shell case offers the premium look of real carbon fiber without the premium price tag. The finish resists fingerprints and maintains its appearance over time, making it as practical as it is stylish. Installation is effortless: simply open your existing key fob, transfer the internal components, and snap this shell in place. No tools required, no modifications to your key mechanism. A perfect entry point for Porsche enthusiasts looking to add a touch of motorsport-inspired styling to their daily carry. What's Included 🔑 Carbon Fiber Key Shell Single replacement fob case with weave texture 📖 Installation Guide Step-by-step transfer instructions Product Highlights Carbon fiber weave finish—premium aesthetic upgrade Durable plastic construction—designed for daily use Universal fit—compatible with multiple Porsche key types Tool-free installation—no disassembly of key electronics Fingerprint-resistant coating—maintains appearance Motorsport-inspired styling—complements any Porsche interior Lightweight design—preserves original key functionality Precision-molded edges—seamless fit over existing fob Easy component transfer—preserves all key functions Professional finish—looks factory-integrated Compatibility Porsche Model Compatibility Porsche 911 / Carrera Direct Fit Porsche Boxster Direct Fit Porsche Cayman Direct Fit Porsche Panamera Direct Fit Porsche Cayenne Direct Fit Porsche Macan Direct Fit Installation Difficulty: Easy | Time: 5 minutes Gently pry open your existing Porsche key fob using a plastic spoon or flat tool—start at the seam between the two halves Carefully separate the fob halves and note the position of internal components (circuit board, battery, rubber pad) Transfer the circuit board and battery to the new carbon fiber shell case Align the rubber directional pad with its designated slot in the new shell Press the shell halves together firmly until you hear a soft click—ensure the fit is snug but don't force Test all key functions (lock, unlock, trunk release) before regular use Note: Do not use metal tools or apply excessive force when opening your original fob—this may damage internal components. If your key fob contains a mechanical blade, ensure it is properly repositioned before closing the new shell. Why Choose Victorious We're automotive enthusiasts who understand the Porsche owner's mindset: every detail matters, and authenticity runs deep. This carbon fiber key shell delivers genuine styling upgrade without compromise. 30-day money-back guarantee on every purchase. If it's not what you expected, we'll make it right—no questions asked. Ready to Upgrade Your Key Fob? Add motorsport-inspired styling to your daily carry. This carbon fiber shell transforms your Porsche key into a premium accessory that reflects your vehicle's engineering excellence. Shop Now Use code 22GET20 for 20% off any 2 items. 4.9/5 rating from 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS, TNT Call +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with Porsche AG, Porsche Cars North America, or Porsche Stuttgart. Porsche is a registered trademark of Dr. Ing. h.c. F. Porsche AG. This product is an aftermarket accessory designed for fitment to Porsche vehicles. All vehicle names and model designations are used for identification purposes only and do not imply endorsement or affiliation with their respective manufacturers.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Upgrades Terrain Response Control Panel Trim Upgrade for Range Rover Vogue & Sport (2013–2021) A precision-crafted, heavyweight chrome trim upgrade that transforms the Terrain Response control panel into a tactile, jewel-like centrepiece worthy of your Range Rover's cabin. L405 Vogue L494 Sport 2013–2021 Heavyweight Metal Chrome Finish Silver & Gold Options Laser-Cut Diamond Detail Direct Fit Sub-5 Min Install Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent a generation of vehicles that set the benchmark for luxury SUV interiors — refined materials, tactile controls, and an unmistakable sense of occasion. The Terrain Response system sits at the heart of the driving experience, and for owners who demand every detail to reflect the same standard as the vehicle itself, the factory selector trim can feel like a missed opportunity. This Terrain Response Control Panel Trim Upgrade is engineered specifically for the L405 and L494 platforms, replacing the standard adjustment knobs with components machined from heavyweight metal and finished in polished chrome. Each piece features laser-cut diamond embossing — a detail that catches light from every angle and adds genuine tactile depth to the centre console interaction. Available in classic silver or warm gold, the choice allows you to complement factory piano black, carbon fibre, or wood veneer trim packages with equal precision. What sets this upgrade apart from lesser alternatives is its material integrity. There is no plastic substrate, no peeling coating, and no compromise on feel. The weight of the metal communicates quality the moment your hand makes contact — exactly the kind of sensory detail that Range Rover ownership is built around. Installation requires no tools, no permanent modification, and under five minutes to complete. What's Included 🎛️ Terrain Response Trim Knobs Pair of heavyweight chrome-finished adjustment knobs with diamond embossing 📋 Installation Guide Step-by-step fitting instructions included in the box 📦 Protective Packaging Premium presentation packaging suitable for gifting Product Highlights Precision-engineered replacement knobs built specifically for L405 and L494 Terrain Response panels Heavyweight metal construction — no plastic, no compromise on tactile quality Polished chrome finish for a premium, factory-elevated appearance Laser-cut diamond embossing for refined grip texture and visual depth Available in silver or gold to suit your interior trim colour palette Direct-fit design — no drilling, cutting, or permanent modification required Sub-5 minute installation with no tools needed Resists fingerprints and daily wear — built for long-term use Compatible with both standard and HSE, Autobiography, and SVAutobiography trim levels Elevates the centre console from functional to focal — a natural complement to any interior upgrade Compatibility Model Code Years Trim Level Fitment Range Rover Vogue L405 2013–2021 SE, HSE, Autobiography, SVAutobiography Direct Fit Range Rover Sport L494 2013–2021 SE, HSE, HSE Dynamic, SVR, Autobiography Direct Fit Range Rover Vogue L460 2022–2026 All Not Compatible Range Rover Sport L461 2022–2026 All Not Compatible Range Rover Defender L663 2020–2026 All Not Compatible Range Rover Velar L560 2018–2022 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: Under 5 Minutes  ·  Tools Required: None Ensure your vehicle is parked safely with the engine off and the Terrain Response selector in a neutral or default position. Grip the existing factory Terrain Response knob firmly and pull upward with steady, even pressure to release it from the selector shaft. No clips or screws are used on the OEM unit. Inspect the selector shaft to ensure it is clean and free of debris before fitting the new trim knob. Align the new heavyweight chrome knob over the selector shaft, ensuring the internal collar is centred correctly. Apply firm downward pressure until the knob seats fully and securely onto the shaft — you will feel it click into position. Repeat the process for the second knob if your vehicle configuration features dual selectors. Cycle through the Terrain Response modes to confirm full functionality and secure fitment before driving. Note: If you are unsure which model year or variant your vehicle is, check your VIN plate or contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Fitting to an incompatible platform may result in poor retention or incorrect selector function. Upgrade Your Range Rover Interior Today Every detail matters inside a Range Rover. Browse our full collection of interior trim upgrades for the L405 Vogue and L494 Sport — and save 20% when you add any two items to your order. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle configuration before purchasing.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Memory Seat Adjustment Trim – Silver & Gold Swarovski-Style Finish for Range Rover Vogue & Sport (2002–2013) A four-piece peel-and-stick trim set that transforms your memory seat controls into a polished, crystal-accented detail — installed in under two minutes, no tools required. L322 Vogue 2002–2012 L320 Sport 2005–2013 Silver & Gold Swarovski-Style Crystal Chrome Accent Peel & Stick Under 2 Minutes Four-Piece Set Overview The Range Rover Vogue L322 and Range Rover Sport L320 represented a generation of genuinely luxurious SUVs — cars whose interiors were designed to impress from the moment the door closed. After years of ownership, even the finest cabins can benefit from a refresh, and it's often the smallest details that make the biggest difference to how a space feels. These memory seat adjustment trims are designed specifically for the seat control panels found in 2002–2013 Range Rover Vogue and Range Rover Sport models. Each trim is finished in your choice of silver or gold, and features a Swarovski-style crystal detailing set alongside polished chrome elements — adding a refined, jewelled accent to controls you interact with every single journey. Engineered for a completely tool-free installation, the set uses pre-applied 3M-grade adhesive tape that bonds cleanly and securely to the existing control surrounds. There is no cutting, no drilling, and no risk of damage to your original trim. The result is a factory-quality appearance upgrade that takes less time to fit than it does to detail your steering wheel. What's Included 💎 Memory Seat Trim × 4 Complete four-piece set covering all seat memory control positions 🔲 Pre-Applied Adhesive 3M-grade double-sided tape fitted to each trim — ready to install 📋 Fitting Guide Step-by-step instructions for a clean, aligned installation ✨ Crystal Accents Swarovski-style stones set within each trim piece for premium finish Product Highlights Precision-cut to match OEM seat control panel dimensions on L322 and L320 models Available in silver and gold colourways to complement light and dark interior themes Swarovski-style crystal stones add genuine sparkle without appearing aftermarket Polished chrome finish resists fingerprints and maintains its lustre over time Pre-applied 3M adhesive ensures a secure, long-lasting bond with zero residue on removal Tool-free installation — no drilling, cutting or panel removal required Installs in under two minutes per trim piece — full set done in one sitting Crafted from high-quality ABS with a durable plated outer layer Ideal for owners looking to refresh an ageing interior or personalise a recently acquired vehicle Makes a considered, understated gift for any Range Rover enthusiast Compatibility Model Code Years Fit Range Rover Vogue L322 2002–2012 Direct Fit Range Rover Sport L320 2005–2013 Direct Fit Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2024 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes Difficulty: Beginner  ·  Estimated Time: Under 10 minutes (full set)  ·  Tools Required: None Ensure the seat control panel surface is clean, dry and free from any dust, grease or polish residue. A quick wipe with an isopropyl alcohol wipe is ideal preparation. Dry-fit each trim piece before committing — hold it in position over the corresponding control to confirm alignment and coverage. Peel the backing from the pre-applied adhesive tape on the first trim piece, taking care not to touch the adhesive surface. Position the trim carefully over the seat control, aligning edges with the panel surround, then press firmly and hold for 30 seconds to allow the bond to set. Repeat for the remaining three trim pieces. Allow 60 minutes before any contact with the trim to ensure full adhesion. Note: Do not apply these trims over damaged, peeling or previously adhesive-treated surfaces — bond strength and finish quality may be compromised. If your existing control panel trim is lifting or cracked, we recommend addressing this before installation. Upgrade Your Interior Today Small details define great interiors. These memory seat trims are one of the simplest ways to bring a fresh, bespoke feel to your Range Rover Vogue or Sport — and they arrive ready to fit the moment the parcel lands. Shop Range Rover Interior Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for compatibility identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Steering Wheel Button Trim in Silver & Gold — Range Rover Vogue & Sport (2014–2017) Crystal-embellished chrome steering wheel button trim that brings a bespoke, jewelled finish to the L405 Vogue and L494 Sport cabin — fitted in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2017 Chrome Finish Swarovski-Style Crystals Silver & Gold No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 were built to a standard that few rivals could match — full-width instrument panels, Windsor leather, and a cabin that genuinely felt hand-crafted. But even in that environment, the steering wheel controls can feel like a missed opportunity. Small, functional, and largely overlooked, they sit front and centre of your driving view every single day. This two-piece steering wheel button trim addresses that gap with precision. Crafted in polished chrome and finished with Swarovski-style crystals, each piece slots over your existing steering wheel controls to create a jewelled surround that reads as factory-fitted. Available in both silver and gold to complement whichever interior palette your vehicle carries — from Ivory to Ebony, or Autobiography dark-themed builds that suit the warmer gold tone beautifully. Installation requires no tools, no adhesives beyond the pre-applied tape already bonded to the trim, and no expertise beyond a clean cloth and sixty seconds of your time. For owners who want the interior to feel as considered as the exterior, this is one of the simplest and most impactful upgrades available for the 2014–2017 generation. What's Included 💎 Steering Wheel Trim Set Two-piece chrome surround with crystal detailing 🔧 Pre-Applied Adhesive Tape Factory-bonded to each piece for clean, tool-free fitting 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Polished chrome construction with premium Swarovski-style crystal detailing Available in silver and gold to match any L405 or L494 interior scheme Precision-moulded two-piece design for seamless steering wheel integration Pre-applied 3M-grade adhesive tape — no drilling, no tools, no mess Installation completed in under two minutes with zero technical knowledge required Durable chrome finish resistant to everyday contact and UV exposure Crystals are individually set and quality-checked for alignment and brilliance Does not obstruct or interfere with steering wheel button functionality Fully reversible — removes cleanly without leaving marks on original trim Tailored specifically for 2014–2017 steering wheel button cluster geometry Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2018–2021 (facelift) Verify Steering Wheel Range Rover Sport L494 2018–2022 (facelift) Verify Steering Wheel Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Difficulty: Beginner  |  Time: Under 2 Minutes  |  Tools Required: None Park your vehicle safely and turn off the ignition. Allow the steering wheel to cool to room temperature if the cabin has been in direct sunlight. Using a clean microfibre cloth, thoroughly wipe down the steering wheel button surround area to remove all dust, fingerprints, and any polish residue. The surface must be completely clean and dry for optimal adhesion. Carefully peel the backing film from the pre-applied adhesive tape on both trim pieces — avoid touching the adhesive surface. Align the first trim piece over the left-hand button cluster, confirming it sits flush and centred before pressing down firmly for 10–15 seconds. Repeat the process for the right-hand piece, applying firm, even pressure across the full surface once positioned correctly. Allow the adhesive to cure for at least 30 minutes before normal driving — avoid touching or adjusting the trim pieces during this period. ⚠ Important: Do not clean the contact area with silicone-based products or wax prior to fitting — these will compromise adhesion. If removing the trim in future, use dental floss or thin fishing line to gently cut through the adhesive layer from left to right to avoid marking the original steering wheel surface. Elevate Every Mile Small details define the difference between a well-specified Range Rover and one that's been truly personalised. Browse the full collection of interior upgrades for your L405 Vogue or L494 Sport — and use the code below to save on your next two items. Shop L405 Vogue Accessories Shop L494 Sport Accessories Buy any 2 items and save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG — crystals featured are Swarovski-style and are not manufactured by or affiliated with Swarovski AG.

Victorious Automotive · Range Rover & Discovery · Interior Trim Cup Holder Cover Mat Trim for Range Rover Sport, Vogue & Discovery (2005–2013) Stainless steel cup holder mats that replace tired plastic surrounds with a clean, precision-fitted upgrade — tool-free, permanent-looking, instantly effective. L320 · L322 · L319 2005–2013 Stainless Steel Tool-Free Fit Interior Trim Direct Fit Set of 2 No Modification Overview The 2005–2013 Range Rover Sport (L320), Range Rover Vogue (L322), and Discovery 3/4 (L319) were built to an exceptionally high standard — but years of daily use leave their mark on the interior, particularly in high-contact areas like the cup holders. Worn, scratched, or discoloured cup holder surrounds are one of the most common complaints from owners of this generation, and one of the easiest to address. These stainless steel Cup Holder Cover Mat Trims are precision-formed to sit cleanly inside the existing cup holder recesses, covering surface wear and immediately restoring the neat, considered appearance the interior deserves. The brushed stainless finish is understated rather than showy — it complements the factory trim rather than competing with it, which is exactly how an upgrade like this should behave. There's no drilling, no adhesive residue risk to worry about, and no specialist tools required. Each mat locates into position using the cup holder recess itself as a guide, producing a snug, rattle-free result. For any owner who takes pride in keeping their vehicle's interior looking as good as it drives, this is one of the simplest and most satisfying upgrades available. What's Included 🥂 Cup Holder Cover Mats × 2 Stainless steel, precision-formed pair for both cup holders 📄 Fitment Guide Step-by-step instruction card included in packaging Product Highlights Precision-formed stainless steel for exact cup holder fitment on L320, L322, and L319 Brushed finish that complements factory interior trim without overpowering it Covers surface scratches, scuffs, and discolouration on existing cup holder surrounds No tools required — locates securely using the existing recess geometry Rattle-free fitment thanks to snug, contour-matched profile Resistant to temperature cycling, moisture, and everyday drink spills Does not interfere with cup holder function — full drink diameter maintained Reversible upgrade — can be removed without marking the original surface Supplied as a matched pair ensuring consistent appearance across both holders Immediate visual result — full installation takes under five minutes Compatibility Model Code Years Fitment Range Rover Sport L320 2005–2013 Direct Fit Range Rover Vogue L322 2005–2012 Direct Fit Discovery 3 / LR3 L319 2004–2009 Direct Fit Discovery 4 / LR4 L319 2009–2016 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes Difficulty: ⬜⬜⬜⬜⬜ Very Easy  ·  Estimated Time: 3–5 Minutes  ·  Tools Required: None Remove any cups, bottles, or loose items from both cup holders. Wipe the cup holder recesses clean using a dry or lightly damp cloth and allow to dry fully before proceeding. Take one cup holder cover mat and orient it correctly by aligning the profile to the recess geometry — the mats are shaped to guide themselves into position. Lower the mat steadily into the cup holder recess, pressing gently around the perimeter to ensure it sits flush against all edges with no gaps or lifted sections. Repeat for the second cup holder. Both mats should sit level and stable with no movement or flex when light pressure is applied from above. Test by placing a cup or bottle in each holder to confirm full function is maintained and the mat remains in place during use. Note: Confirm your vehicle's model code and production year before ordering. Cup holder dimensions can vary between early and late production runs within the same model year — if you are unsure, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchasing. Upgrade Your Interior Today Small details define a well-kept interior. These cup holder trims are the kind of upgrade you notice every single time you get in — and so will anyone else who rides with you. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩️ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent accessories retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of its subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.