Victorious · Range Rover Evoque / Discovery Sport · Cooling System
2.0L Turbo Petrol Expansion Tank Lower Hose
OEM-specification coolant hose engineered for perfect fit and reliable thermal control on your Evoque or Discovery Sport.
L538 / L551 / L550
2012–2018+
2.0 Turbo Petrol
Direct Fit
Rubber Hose
LR024241 / LR035435
Why This Hose Matters
The expansion tank lower hose on your Range Rover Evoque (2012–2018) or Discovery Sport (2015+) handles constant thermal cycling under pressure. When the original fails—cracking, leaking, or becoming brittle—coolant escapes, temperatures spike, and engine protection collapses. This genuine OEM-spec hose restores full cooling circuit integrity without compromise.
We stock this part because Evoque and Discovery Sport owners depend on reliable cooling in all climates, from desert heat to daily commute stress. Whether you're managing a slow weep or a catastrophic failure, this direct-replacement hose gets you back to baseline immediately.
Manufactured to original equipment specifications using automotive-grade rubber compound and precise fitment geometry, it resists high-temperature degradation and maintains pressure seal integrity across the full operating range of your 2.0L turbocharged petrol engine.
What's Included
🔧
1 × Expansion Tank Lower Hose
Direct fit, ready to install
✓
OEM Part Numbers Included
LR024241 & LR035435
📋
Installation Guide
Step-by-step instructions
🛡️
12-Month Warranty
Full coverage included
Product Highlights
- OEM-specification material and fitment geometry
- Engineered for 2.0L turbocharged petrol engines
- Direct bolt-on installation—no modification required
- High-temperature rubber resistant to thermal cycling
- Maintains full pressure seal integrity
- Dual OEM part numbers supported (LR024241 & LR035435)
- Lower front placement for straightforward access
- Automotive-grade material—no cost-cut substitutes
- Backed by 12-month warranty
- 30-day money-back guarantee (Victorious Automotive)
Compatibility & Fitment
| Vehicle Model |
Years |
Engine |
Fitment |
| Range Rover Evoque (L538) |
2012–2018 |
2.0L Turbo Petrol |
Direct Fit |
| Discovery Sport (L550) |
2015–Present |
2.0L Turbo Petrol |
Direct Fit |
| Range Rover Evoque (L551) |
2019+ |
2.0L Turbo Petrol |
Not Compatible |
| Discovery (All Models) |
Any |
Diesel Only |
Not Compatible |
How to verify fit: Check your part number against LR024241 or LR035435. If unsure, provide your VIN or current part number and we'll confirm compatibility within 24 hours. Contact support@victorious.shop or call +44 203 943 9919 (Mon–Fri, 9am–7pm GMT).
Installation Notes
Difficulty Level: Intermediate | Time: 45–90 minutes
-
Disconnect the battery negative terminal and allow the cooling system to cool completely (minimum 30 minutes after engine shutdown).
-
Locate the expansion tank on the driver's side of the engine bay—it's translucent plastic with a filler cap and gauge markings.
-
Open the coolant drain plug at the radiator base and partially drain the system into a clean container to below hose level (no need to empty entirely).
-
Identify the lower hose connection running from the expansion tank to the radiator inlet or water pump housing.
-
Remove the hose clamp using a flathead screwdriver or hose clamp pliers, then slide the old hose free. Note: Expect minimal residual coolant spillage—have absorbent cloth ready.
-
Slide the new hose onto the connection points, pushing firmly until the hose seats fully (you should feel it reach the barbed fitting).
-
Reinstall the hose clamp and tighten to 8–10 Nm (6–7 ft-lbf)—snug but not over-tightened, which can crack the barb.
-
Refill the coolant with OEM Land Rover coolant (Motorcraft or equivalent) to the "MAX" line on the expansion tank.
-
Reconnect the battery negative terminal and start the engine. Allow it to idle for 2–3 minutes, watching for drips or leaks at both hose connections.
-
Perform a visual inspection once the engine reaches operating temperature (fan cycles on). Check for seeping or spray. Top up if needed.
⚠ Important: Never remove the expansion tank cap or radiator cap when the engine is hot—pressure release can cause severe burns. Always work on a cool system. If you encounter corrosion or difficulty removing the old hose, apply penetrating oil (5–10 minutes) before attempting removal. Do not reuse old hose clamps; discard and fit new stainless-steel clamps if originals show rust or damage.
Why Choose Victorious Automotive
We're enthusiasts who work exclusively with Land Rover, Range Rover, and Defender vehicles. Every part we stock—including this cooling hose—is selected for OEM authenticity, tested fitment, and real-world durability. Our 4.9-star rating across 12,300+ verified reviews reflects years of getting these details right.
We ship globally via DHL, FedEx, UPS, and TNT. UK orders arrive within 2–3 working days. Your purchase includes a 30-day money-back guarantee and 12-month warranty on all parts.
Ready to Restore Cooling Circuit Integrity
Don't limp through hot weather with a failing coolant hose. This OEM-spec part reinstates full thermal protection and peace of mind for your Evoque or Discovery Sport.
Shop Expansion Tank Lower Hose
Order two or more items and apply code 22GET20 at checkout for 20% off your entire order.
✓ 30-Day Money-Back
✓ 12-Month Warranty
✓ Worldwide Shipping
✓ 4.9★ Rated
Questions? Call us at +44 203 943 9919 (Mon–Fri, 9am–7pm GMT) or email support@victorious.shop. Our team is ready to confirm fitment or discuss your cooling system.
Victorious Automotive is an independent aftermarket retailer. We are not affiliated with Jaguar Land Rover Limited, Land Rover, Range Rover, Discovery, Evoque, or any OEM manufacturer. All product names, logos, and brands are property of their respective owners. This description is provided for reference only and does not constitute an official product guide. Please verify fitment using your VIN or current part number before purchase. Improper installation may void your vehicle's warranty. Always consult your owner's manual for technical specifications and service intervals.
