Victorious · Freelander 2 · Engine Belts
Serpentine Drive Belt 2.0L 16V Petrol – Freelander 2 LR2 L359
OEM-specification accessory drive belt engineered for Land Rover Freelander 2 2.0L petrol engines — direct replacement ensuring optimal alternator, power steering, and air conditioning performance.
L359
2013–2015
2.0L 16V Petrol
V-Ribbed Belt
OEM LR036456
12-Month Warranty
Overview
The Land Rover Freelander 2 (LR2) L359 is the go-to compact SUV for UK and European drivers who demand reliability and genuine Land Rover capability. Whether navigating urban streets or venturing off-road, your Freelander 2's 2.0L petrol engine depends on a properly tensioned serpentine belt to drive critical ancillary systems—alternator, power steering pump, air conditioning compressor, and water pump.
This OEM-specification 6DPK2280 serpentine belt delivers the same fitment and performance as genuine Land Rover LR036456 belts, with factory engineering that ensures consistent power delivery, minimal slippage, and long service intervals. Over time, belts wear, crack, and fray—especially in high-heat engine bays or with heavy use. A worn or failing belt can strand you with a dead battery, limp steering, or a seized compressor.
We've sourced this belt to exacting tolerances, ensuring it installs with zero modification, maintains factory tension, and restores your Freelander 2's electrical and hydraulic charging performance to factory spec. At Victorious Automotive, we back every belt with a 30-day money-back guarantee and 12-month manufacturer warranty—because we know Land Rover owners deserve parts they can trust.
What's Included
🔧
1× Serpentine Belt
6DPK2280 / LR036456, pre-tested
📋
Fitment Guide
Vehicle verification & technical notes
🛡️
12-Month Warranty
Full coverage against defect or failure
💚
30-Day Money-Back
Hassle-free returns within 30 days
Product Highlights
-
OEM-Spec Engineering – Manufactured to Land Rover LR036456 exact tolerances and material composition
-
Direct Fit Installation – No modification, shims, or adapter tensioners required; bolt-on compatibility
-
6-Rib Poly Construction – Superior load capacity, heat resistance, and longevity versus older 5-rib designs
-
Factory Tension Geometry – Engineered pulley contact ensures minimal slippage and consistent RPM delivery to alternator and compressor
-
2013–2015 Freelander 2 LR2 L359 – Covers all 2.0L 16V petrol variants without cross-platform confusion
-
DAYCO 6DPK2280 Equivalent – Trusted automotive belt supplier pedigree; meets and exceeds CONTINENTAL 6K2285 spec
-
Alternator, P/S, A/C Ready – Powers all three ancillary systems with the same wrap angle and belt speed as OEM
-
Pre-Tested Quality Control – Each belt inspected for rib integrity, elasticity, and noise-free operation before dispatch
-
Hot-Climate & UK Durability – Rated for temperatures -30°C to +80°C; resists UV and ozone degradation
-
12-Month Full Warranty – Manufacturer defect or premature wear covered; Victorious 30-day money-back guarantee
Compatibility & Fitment
| Vehicle |
Model Code |
Engine |
Years |
Status |
| Land Rover Freelander 2 |
LR2 (L359) |
2.0L 16V Petrol |
2013–2015 |
Direct Fit |
| Land Rover Freelander 2 |
L359 |
2.2L TDi Diesel |
2007–2015 |
Not Compatible |
| Land Rover Freelander 1 |
L314 |
All engines |
1997–2006 |
Not Compatible |
| Range Rover Evoque |
L538 / L551 |
2.0L Petrol / Diesel |
2011–2022 |
Not Compatible |
| Land Rover Discovery 3 / 4 |
L319 / L320 |
2.7L TDV6 / 3.0L TDV6 |
2004–2014 |
Not Compatible |
Verify your vehicle: Check your registration plate or VIN to confirm your Freelander 2 is a 2013–2015 L359 with a 2.0L petrol engine. If you're unsure, contact us with your VIN and we'll confirm fitment free of charge.
Installation Guide
Difficulty: Intermediate | Time: 45–90 minutes
-
Disconnect the battery negative terminal and wait 5 minutes to discharge the electrical system.
-
Remove the engine cover (if fitted) and identify the serpentine belt routing. Consult the service guide or engine bay decal for the belt path across alternator, power steering pump, idler, and tensioner pulleys.
-
Locate the automatic belt tensioner on the lower left side of the engine bay. Using a 13mm or 15mm socket wrench, rotate the tensioner arm counterclockwise to release tension on the belt.
-
Carefully slide the worn belt off all pulleys and remove it. Inspect all pulleys for damage, glazing, or misalignment; replace any pulley showing wear or noise.
-
Route the new belt following the factory diagram, starting from the crankshaft pulley and working through each auxiliary system. Ensure the belt sits fully in all pulley grooves—no twists or skew.
-
Apply tension by releasing the tensioner arm slowly back into position. The spring-loaded automatic tensioner will seat the belt correctly.
-
Rotate the engine by hand 3–4 full rotations to verify smooth belt travel and ensure no rubbing on hoses, wires, or chassis.
-
Reconnect the battery and start the engine. Listen for any squealing or noise. A new belt may produce light friction noise for 30 seconds; this is normal and will subside after a few drive cycles.
-
Run at idle for 2 minutes, then take a short 5-minute drive to bed in the belt and verify alternator, power steering, and air conditioning function normally.
⚠ Warning: Do not over-tighten the belt; automatic tensioners are calibrated at the factory. Over-tension accelerates pulley bearing wear and can snap a new belt. If your tensioner spring feels weak or the belt remains loose, the tensioner should be replaced—contact us for sourcing.
Why Victorious for Your Freelander 2?
We specialise in Land Rover engine, chassis, and accessory parts for every generation—Defender, Discovery, Freelander, Evoque, and Range Rover. Our team has logged thousands of hours on Freelander 2 L359 models across the UK and Europe, and we understand the precise fitment and performance standards you demand.
Every serpentine belt in our catalogue is sourced direct from tier-one automotive suppliers, inspected in-house, and tested against OEM specifications. We don't compromise on fitment or quality, and our 12-month warranty plus 30-day money-back guarantee prove it.
Call +44 203 943 9919 (Mon–Fri 9am–7pm) if you have questions about fitment, installation, or need a tensioner belt combo quote.
Ready to Restore Your Freelander 2's Charging System?
Order your OEM-spec 6DPK2280 serpentine belt today and experience the confidence of genuine Land Rover performance. Ships worldwide via DHL, FedEx, or UPS within 2 working days.
Add to Cart – £32.99
Use code 22GET20 for 20% off any 2 items
✓ 4.9/5 stars – 12,300+ verified reviews
✓ 30-day money-back guarantee
✓ 12-month warranty included
✓ Worldwide shipping – DHL, FedEx, UPS, TNT
Disclaimer: Victorious Automotive is an independent aftermarket supplier. We are not affiliated with, endorsed by, or authorised by Jaguar Land Rover Ltd, Land Rover, Range Rover, or any OEM manufacturer. All product names, logos, and trademarks are the property of their respective owners. This product is a compatible replacement part suitable for the vehicles listed and meets or exceeds OEM specifications. Always verify fitment with your vehicle's service manual or VIN before purchase.
