Products

Victorious Automotive · Land Cruiser LC300 · Exterior Stainless Steel Fuel Cap Cover for Toyota Land Cruiser 300 (LC300) Premium stainless steel fuel door trim that elevates your LC300's exterior aesthetic with zero permanent modifications. LC300 2021–2024 Stainless Steel Direct Fit Adhesive Install Overview The Toyota Land Cruiser 300 (2021–2024) is an icon of capability and presence. This stainless steel fuel cap cover preserves that refined character by adding a sophisticated trim upgrade that catches light and adds dimensionality to your LC300's flank. Our cover is engineered from automotive-grade stainless steel and installed using precision-positioned self-adhesive backing. No drilling, no fasteners, no modifications—just a clean, professional enhancement that complements the truck's existing fuel door seamlessly. Whether you run Expedition Silver, Graphite Grey, or any LC300 finish, this trim works across the range. It's a small detail that discerning LC300 owners recognise as a mark of attention to quality and design. What's Included ✓ 1× Stainless Steel Cover Pre-shaped for perfect LC300 fit 🧼 Cleaning Prep Cloth Removes oils for optimal adhesion 📋 Installation Guide Step-by-step visual instructions 🔄 Removable Design No permanent damage to factory finish Product Highlights Automotive-grade stainless steel construction for superior corrosion resistance Available in Silver, Black, and Carbon Fiber finishes to match your style Direct fit—no trimming, drilling, or modifications required Self-adhesive backing for tool-free, 10-minute installation Weather-sealed to withstand rain, UV, salt spray, and extreme temperatures Precision-engineered for factory-perfect alignment on LC300 fuel doors Easy removal leaves zero glue residue or paint damage Adds luxury visual depth without affecting fuel filler access Backed by 30-day money-back guarantee and expert UK support Trusted by 12,300+ verified Land Cruiser and luxury SUV owners Compatibility Model Years Status Land Cruiser 300 (LC300) 2021, 2022, 2023, 2024 Direct Fit Land Cruiser 200 (J200) 2008–2020 Not Compatible Land Cruiser 250 (LC250) 2024+ Not Compatible Installation Difficulty: Beginner | Time: 10 Minutes Clean the fuel door surface using the included prep cloth. Remove all dirt, wax, and oils. Allow to dry completely for 5 minutes. Position the cover dry against the fuel door to check alignment. It should sit centred and level with the surrounding panel. Peel back the adhesive backing slowly, starting from one corner. Work methodically to avoid air bubbles. Press firmly across the entire cover surface for 30 seconds, applying even pressure from centre outward. Wait 48 hours before washing the vehicle to allow the adhesive to set fully. Pro tip: Apply the cover in ambient temperatures above 15°C for optimal adhesive performance. Cold conditions may reduce initial bond strength. Complete Your LC300's Finish Premium exterior trim from a brand trusted by Land Cruiser, Land Rover, and Range Rover owners worldwide. 30-day guarantee. Lifetime support. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS, TNT ☎️ +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent automotive accessories manufacturer and retailer. We are not affiliated with Toyota, Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM. All product names and trademarks are the property of their respective owners. This product is designed to enhance and customise your vehicle and is not an official manufacturer component.

Victorious Automotive · Defender L663 · Interior Trim Stainless Steel Loadspace Treadplate for Land Rover Defender 110 L663 (2020–2026) A precision-formed stainless steel loadspace treadplate that reinforces your Defender 110's rear sill with a durable, factory-grade finish — protecting what matters while elevating what you see every time the tailgate drops. Defender L663 2020–2026 Stainless Steel Loadspace Treadplate Rear Sill Protection Silver & Black Direct Fit No Drilling Required Model: LLK2605 ISO9001 Certified Overview The Land Rover Defender 110 L663 was engineered to go further — across terrain most vehicles wouldn't dare attempt. But every time the tailgate opens, the rear sill takes the brunt of boots, kit bags, and heavy loads. Over time, that scuff-prone edge begins to tell a story you'd rather it didn't. The loadspace treadplate addresses this directly: a purpose-built protective trim that sits flush across the rear sill and takes the hit so your factory paintwork doesn't have to. Constructed from high-grade stainless steel and precision-cut to match the exact profile of the Defender 110 L663, this treadplate delivers a clean, purposeful aesthetic in keeping with the Defender's character. Available in both Silver and Black, it complements both standard and dark-themed interior builds equally well. The brushed finish resists fingerprints and minor abrasions, maintaining its appearance through years of genuine use. Installation requires no drilling and no specialist tools — a pre-applied automotive-grade adhesive tape ensures a secure, rattle-free bond directly to the sill. The result is a finish that looks like it left the factory that way, with the peace of mind that your Defender's rear loadspace entry is protected for the long haul. What's Included 🔩 Stainless Steel Treadplate 1x rear loadspace sill cover trim, LLK2605 🧲 Automotive Adhesive Tape Pre-cut, high-bond 3M-style mounting tape 📋 Fitting Guide Step-by-step surface prep and fitment instructions Product Highlights Precision-formed to match the exact contour of the Defender 110 L663 rear sill High-grade stainless steel construction — corrosion resistant and built to last Available in Silver and Black to suit standard and dark-theme interiors Brushed finish resists surface scratches, scuffs, and fingerprints in daily use No drilling required — automotive adhesive tape provides a clean, secure bond Protects factory paintwork from boot scuffs, loading damage, and wear ISO9001 quality certified manufacturing for consistent finish and fit Lightweight at 300g — no impact on boot floor dynamics or tailgate operation Dimensions: 70cm (L) × 15cm (W) — full-width sill coverage for the 110 body Reversible fitment — can be removed cleanly without damaging original surfaces Compatibility Model Code Year Range Body Style Fitment Land Rover Defender 110 L663 2020–2026 5-Door SUV Direct Fit Land Rover Defender 90 L663 2020–2026 3-Door SUV Not Compatible Land Rover Defender 130 L663 2022–2026 8-Seat Extended Not Compatible Range Rover Sport L494 / L461 2013–2026 5-Door SUV Not Compatible Range Rover Vogue L405 / L460 2013–2026 5-Door SUV Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔧 Tools Required: None Open the Defender 110's tailgate fully and clear the rear loadspace sill of any existing dirt, grease, or moisture using an isopropyl alcohol wipe or equivalent cleaning solution. Allow the sill surface to dry completely — adhesion performance is significantly reduced on damp or contaminated surfaces. Dry-fit the treadplate against the sill without removing the adhesive backing to confirm alignment and positioning before committing. Peel back the adhesive tape protective liner and carefully align the treadplate to the sill, starting from one end and pressing firmly along the full length to ensure consistent contact. Apply firm, even pressure across the entire surface for 30–60 seconds to activate the adhesive bond fully. Allow a minimum of 2 hours cure time before placing any load across the treadplate. For best results, leave undisturbed for 24 hours in ambient temperature conditions. ⚠ Important: Do not install in temperatures below 10°C or in direct sunlight where surface temperatures may exceed 40°C, as this can affect the adhesive cure quality and long-term bond strength. Complete Your Defender's Interior This treadplate is just one part of a considered interior upgrade. Browse our full Defender L663 collection for door sill guards, interior trims, and loadspace accessories — all engineered to the same standard of fit and finish. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the intellectual property of their respective owners. Always verify fitment against your specific vehicle's build specification before purchase.

Victorious Automotive · Range Rover Velar · Interior Upgrades Stainless Steel Sport Pedals for Range Rover Velar 2017–2020 Precision-crafted stainless steel and rubber pedal covers that bring a sharper, more driver-focused feel to the Velar's already refined cabin — with a fitment engineered specifically for 2017–2020 models. Range Rover Velar 2017–2020 Stainless Steel Rubber Inserts Direct Fit Brake & Accelerator No Drilling Required Interior Upgrade Overview The Range Rover Velar arrived as one of Land Rover's most design-forward vehicles — a study in restrained luxury that brought a minimalist, tech-driven interior to the Velar lineup. Every surface in the cabin was considered carefully, and the footwell is no exception. Yet the standard pedal covers, while functional, rarely reflect the sporting character that many Velar owners drive with. These stainless steel pedals address that directly. Constructed from high-grade stainless steel with anti-slip rubber inserts, these pedal covers are precision-shaped to match the original brake and accelerator pedal dimensions on 2017–2020 Range Rover Velar models. The result is a clean, purposeful upgrade that improves both the visual quality of the footwell and the tactile confidence underfoot — particularly during spirited driving where pedal feel genuinely matters. Installation requires no specialist tools, no permanent modifications and no drilling. The covers clip securely over the factory pedals in minutes, making this one of the most impactful and straightforward interior upgrades available for the Velar. Whether you're refreshing a well-used footwell or simply finishing the cabin to a higher standard, these pedals deliver exactly what the Velar's character demands. What's Included 🦶 Accelerator Pedal Cover Stainless steel with rubber grip inserts 🛑 Brake Pedal Cover Stainless steel with rubber grip inserts 🔩 Mounting Hardware Clips and fixings for secure no-drill fit 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-fit design for 2017–2020 Range Rover Velar High-grade stainless steel construction throughout Anti-slip rubber inserts for confident pedal control Covers both brake and accelerator pedals No drilling, cutting or permanent modification required Clip-on fitment installs in under 15 minutes Resistant to wear, moisture and everyday footwell conditions Polished finish complements the Velar's premium interior aesthetic Adds a subtle performance feel without altering factory function Direct factory pedal replacement aesthetic — OEM proportions retained Compatibility Vehicle Year Range Transmission Fitment Range Rover Velar (L560) 2017–2020 Automatic Direct Fit Range Rover Velar (L560) 2021–2023 Automatic Verify Before Purchase Range Rover Evoque (L538) 2011–2018 Automatic Not Compatible Range Rover Evoque (L551) 2019–2024 Automatic Not Compatible Range Rover Sport (L494) 2013–2020 Automatic Not Compatible Range Rover Vogue (L405) 2013–2020 Automatic Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–20 Minutes  ·  Tools Required: None Ensure the vehicle is parked, engine off, and the footwell is clean and dry before beginning fitment. Remove any floor mats from the driver's footwell to give clear, unobstructed access to both pedals. Align the accelerator pedal cover over the factory accelerator pedal, ensuring the rubber inserts face upward and the mounting clips line up with the pedal edges. Press the cover firmly onto the pedal until all clips engage and the cover sits flush with no movement or rattle. Repeat the same process for the brake pedal cover, taking care to centre the cover evenly over the factory pedal face. Apply light foot pressure to both pedals to confirm secure fitment before returning the floor mat and test driving. ⚠ Safety Note: Before driving, always verify that both pedal covers are firmly secured and do not interfere with pedal travel or return. If any cover feels loose or obstructs pedal movement, remove immediately and re-fit before use. Complete Your Velar's Interior These pedals are just the beginning. Explore the full Victorious range of Range Rover Velar accessories — from interior trim upgrades to exterior styling — and build a cabin that's entirely your own. Shop All Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Stainless Steel Pedal Covers for Toyota Land Cruiser 250 (2024–2025) A precision-fit stainless steel pedal upgrade that blends non-slip safety with a refined cockpit aesthetic — engineered specifically for the Land Cruiser 250. LC250 2024–2025 Stainless Steel Non-Slip Surface Direct Fit Interior Upgrade Silver & Black No Drilling Required Overview The Toyota Land Cruiser 250 represents a new chapter for one of the most respected SUV lineages in history — a vehicle built for serious capability without compromise on refinement. Owners who invest in the LC250 understand that every detail matters, both on the trail and in the cabin. The interior of the LC250 is purposeful and clean, and the pedal box is one area where a well-chosen upgrade can make an immediately tangible difference to both the feel and appearance of the driving environment. These stainless steel pedal covers are precision-manufactured to fit the 2024–2025 Toyota Land Cruiser 250 without modification. Constructed from high-grade stainless steel with a brushed silver and black dual-tone finish, they replace the look of the factory pedals with something considerably more premium — while simultaneously improving the functional interface between driver and vehicle. The raised non-slip tread pattern provides reliable grip whether you're wearing trail boots or driving shoes. Unlike generic aftermarket pedals that require drilling, trimming, or guesswork, these covers are designed to the exact dimensions of the LC250's pedal layout. Installation is straightforward and reversible, making this one of the most rewarding interior upgrades available for the platform — high visual impact, genuine daily benefit, and zero permanent modification to your vehicle. What's Included 🦶 Accelerator Pedal Cover Stainless steel, non-slip tread pattern 🦶 Brake Pedal Cover Wider profile, dual-tone finish 🦶 Dead Pedal / Footrest Cover Left-side rest plate, matching finish 🔩 Fitting Hardware All necessary fixings included 📄 Installation Guide Step-by-step fitting instructions Product Highlights Precision-fit design specific to the Toyota Land Cruiser 250 (2024–2025) High-grade stainless steel construction — resistant to corrosion and wear Raised non-slip tread pattern reduces foot slip in all conditions Dual-tone silver and black finish complements the LC250 interior palette No drilling or permanent modification required for installation Fully reversible — original pedals can be reinstated at any time Secure mechanical fixing — no adhesive-only mounting Compatible with both left-hand and right-hand drive configurations Adds a premium, purposeful aesthetic to the pedal box area Durable enough for daily use and off-road driving environments Compatibility Vehicle Year Range Trim / Variant Fitment Toyota Land Cruiser 250 2024–2025 All Trims (GX, VX, Sahara, Sahara ZX) Direct Fit Toyota Land Cruiser 250 2024–2025 Automatic Transmission Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2025 All Variants Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Variants Not Compatible Toyota Prado 250 2024–2025 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–35 Minutes  ·  Tools Required: Basic hand tools Ensure the vehicle is parked on a flat surface with the engine off and the parking brake applied before beginning installation. Clean the existing factory pedals thoroughly using a dry cloth or mild cleaner, removing any dirt, oil, or debris that could affect fitment. Dry-fit each pedal cover over its corresponding factory pedal to confirm alignment and positioning before committing to installation. Secure the accelerator pedal cover first using the provided hardware, ensuring the fixing clips or screws are fully engaged and the cover sits flush with no movement. Repeat the process for the brake pedal cover, taking care to confirm the cover does not interfere with the full travel range of the pedal. Fit the dead pedal / footrest cover last, aligning with the factory rest plate and securing firmly. Test all pedals through their full range of motion before driving. Confirm there is no catching, rubbing, or restriction at any point. ⚠ Important: Do not drive the vehicle until all pedal covers have been fully secured and tested through their complete range of motion. Any looseness or movement detected during testing must be resolved before use. If in doubt, consult a qualified automotive technician. Upgrade Your LC250 Interior The pedal box is one of the most tactile parts of any driving experience. These stainless steel covers are a small change that makes a lasting impression — explore the full range of LC250 interior accessories at Victorious Automotive. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, endorsed by, or approved by Toyota Motor Corporation or any of its subsidiaries. Toyota and Land Cruiser are registered trademarks of Toyota Motor Corporation. All vehicle names, model codes, and trademarks are referenced solely for the purpose of fitment compatibility identification.

Victorious · Mercedes-Benz · Exterior Protection Stainless Steel Rear Bumper Protector for Mercedes-Benz E-Class W213 Professional-grade bumper defence in premium stainless steel—engineered for the discerning E-Class owner. W213 2016–2017 Stainless Steel E200 / E300 Direct Fit No Modification Overview The W213 E-Class represents a pinnacle of executive elegance. Whether navigating urban car parks or highway traffic, your rear bumper faces constant threat from minor impacts, reversing scrapes, and UV exposure. This stainless steel protector plate shields that vulnerable zone with confidence. Machined from marine-grade stainless steel (1kg of solid protection), this bumper defence combines OEM-specification fitment with aesthetic sophistication. The brushed silver finish complements the E-Class's contemporary design language while adding a subtle layer of professional detail that speaks to meticulous ownership. Installation requires no drilling, cutting, or permanent modifications—simply secure and walk away knowing your rear bumper is defended against the everyday hazards that compromise paint and panel integrity. What's Included 🛡️ Rear Bumper Protector Plate Stainless steel, brushed silver finish 🔧 Mounting Hardware Secure fastening system included 📋 Installation Guide Step-by-step fitting instructions ✓ Fitment Verification Precision-engineered for W213 models Product Highlights Premium marine-grade stainless steel construction Brushed silver finish matches contemporary E-Class styling Direct fit—no drilling or permanent modifications required Defends against parking lot scrapes and reversing impacts Corrosion-resistant, maintenance-free surface Weighs just 1kg for minimal impact on vehicle dynamics Precise engineering for 2016–2017 W213 E200 and E300 Simple tool-free installation (approximately 10 minutes) Professional OEM-specification fitment Protects resale value by preserving rear panel integrity Compatibility Model Model Code Years Fitment Mercedes-Benz E200 (W213) LLK288 2016–2017 Direct Fit Mercedes-Benz E300 (W213) LLK288 2016–2017 Direct Fit Mercedes-Benz E-Class (W213) Other variants 2018+ Not Compatible Mercedes-Benz E-Class (W212) 2009–2015 All years Not Compatible Always verify your vehicle identification number (VIN) and model year before purchase. If unsure, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Notes Difficulty Level: Beginner | Time Required: ~10 minutes Prepare the rear bumper. Park in a well-lit area. Clean the rear bumper surface with warm soapy water and allow to dry completely. Position the protector plate. Align the stainless steel plate centrally against the lower rear bumper, ensuring equal spacing on both sides. Mark mounting points. Using the included template or pre-drilled holes in the plate, lightly mark fastener positions with a marker. Secure the plate. Apply mounting hardware at all marked points, tightening firmly but not excessively to avoid warping the plate. Inspect alignment. Step back and verify the plate is level and symmetrical. Check all fasteners are secure. Final check. Allow any adhesive (if used) to cure for 2–4 hours before driving, per product instructions. ⚠️ Important: Do not over-tighten fasteners, as this may damage the stainless steel or underlying bumper panel. If the plate shifts after installation, remove and reposition before re-securing. Protect Your Investment Your E-Class deserves protection that matches its sophistication. This stainless steel rear bumper plate delivers exactly that—silent, effective, and built to last. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee 📦 Worldwide shipping via DHL, FedEx, UPS Disclaimer: Victorious Automotive is an independent accessory specialist and is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Daimler-Benz, or any official Mercedes-Benz distributor. All product names, logos, and brands referenced are the property of their respective owners. This product is designed for compatibility with the specified vehicle model and year only. Always verify fitment before purchase. ```

Victorious Automotive · Land Rover Discovery 4 · Exterior Accessories Stainless Steel Rear Tailgate Radio Antenna Bracket Base — Land Rover Discovery 4 (2010–2016) A precision-formed stainless steel antenna bracket base engineered to restore or upgrade the tailgate-mounted antenna mount on your Discovery 4 — delivering lasting corrosion resistance and a clean, factory-consistent finish. Discovery 4 · L319 2010–2016 Stainless Steel Black Finish Rear Tailgate Radio Antenna Direct Fit Screw Fix 100% Brand New Overview The Land Rover Discovery 4 (L319) is one of the most capable and enduring off-road SUVs ever produced — a vehicle that demands accessories built to match its reputation for toughness. Whether your original antenna bracket base has succumbed to corrosion, sustained physical damage during off-road use, or simply needs replacing as part of a tailgate refresh, getting the right component matters. A poorly fitted or rusted bracket not only looks out of place but can compromise antenna signal performance and allow water ingress around the tailgate panel. This stainless steel rear tailgate radio antenna bracket base has been designed specifically for the Discovery 4, ensuring a precise, direct-fit installation to the existing mounting points on the tailgate. Formed from high-grade stainless steel with a smart black finish, it replicates the OEM mounting position exactly — keeping your radio antenna securely seated and correctly aligned whether you're on the motorway or deep in the field. Unlike cheaper pressed steel or plastic alternatives, the stainless steel construction here means genuine long-term resistance to rust, road salt, and the elements — exactly what Discovery 4 owners who use their vehicles as intended should expect. It's a small component that makes a real difference to the cleanliness and functionality of your tailgate area. What's Included 📡 Antenna Bracket Base × 1 Stainless steel, black finish — rear tailgate mount 🔩 Fixing Hardware Screw fixation system for secure tailgate attachment 📄 Installation Guide Basic fitting reference included Product Highlights Precision-engineered for the Discovery 4 (L319) rear tailgate antenna mount position High-grade stainless steel construction for maximum corrosion resistance Sleek black finish complements the Discovery 4's exterior trim and bodywork Direct-fit replacement — aligns with existing OEM mounting points, no modification required Screw fixation system ensures a secure, rattle-free installation Maintains correct antenna positioning for optimal radio signal reception Protects the tailgate panel from water ingress around the antenna aperture Suitable for all Discovery 4 variants across the full 2010–2016 production run 100% brand new — not a remanufactured or reconditioned part Manufactured in a quality-certified facility to strict dimensional and finish tolerances Compatibility Vehicle Code Years Trim / Engine Fit Land Rover Discovery 4 L319 2010–2016 All Trim Levels — 3.0 TDV6, 5.0 V8 Direct Fit Land Rover Discovery 3 L319 2004–2009 All Variants Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 All Variants Not Compatible Range Rover Sport L494 L494 2013–2022 All Variants Not Compatible Range Rover Vogue L405 L405 2013–2021 All Variants Not Compatible Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Estimated Time: 15–30 Minutes  ·  🛠 Tools Required: Screwdriver Set Open the Discovery 4 rear tailgate fully and ensure the vehicle is on a stable, level surface with the ignition off. Carefully disconnect the existing antenna cable from the old bracket base. Take note of the routing before removal. Remove the existing antenna bracket base by undoing the retaining screws using the appropriate screwdriver — keep fixings safe for reference. Clean the mounting area on the tailgate panel to remove any residue, corrosion, or sealant from the previous bracket. Position the new stainless steel bracket base over the tailgate aperture, aligning it precisely with the existing mounting holes. Secure the bracket using the supplied screw fixings — tighten evenly to ensure a flush, rattle-free fit without overtightening. Reconnect the antenna cable, ensuring it follows the original routing through the tailgate panel. Test radio reception on multiple frequencies to confirm the antenna is correctly seated and signal is unimpaired. ⚠ Note: Always verify your Discovery 4's build year and tailgate configuration before installation. If your vehicle has a pre-facelift or late-production tailgate variant, minor dimensional differences may exist. If in doubt, contact our team on +44 203 943 9919 before fitting. Complete Your Discovery 4 Build Browse our full range of Discovery 4 exterior accessories — curated specifically for L319 owners who demand quality, fitment accuracy, and lasting durability from every component they fit. Shop All Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes. Please verify fitment with your specific vehicle before purchase.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Protection Stainless Steel Seat Protection Kick Plate — 2024–2025 Toyota Land Cruiser Prado 250 Precision-formed 304 stainless steel kick plate that shields the LC250's seat bases and lower door surrounds from scuffs, dirt, and daily wear — without a single mark left on the vehicle. LC250 2024–2025 304 Stainless Steel No-Drill Fit Anti-Kick Protection Interior Trim Available in 3 Finishes Direct Fit Overview The 2024 Toyota Land Cruiser Prado 250 represents a significant generational step forward — a vehicle built for genuine capability without compromising interior refinement. Owners who invest in the LC250 understand that preserving its interior condition from the very first mile is not overcaution; it's ownership intelligence. The seat bases and lower cabin panels are among the first surfaces to suffer from boots, luggage, and passenger entry — areas that are awkward to clean and expensive to restore. This Stainless Steel Seat Protection Kick Plate is engineered specifically for the LC250's interior geometry. Formed from grade 304 stainless steel and finished in your choice of silver, black, or carbon pattern, each plate sits flush against the lower seat frame and adjacent trim, creating an unobtrusive barrier between the panel and whatever daily life throws at it. The result is a factory-clean look that stays that way — whether you're on a weekly school run or returning from a weekend on rough terrain. Installation is entirely damage-free — no drilling, no permanent adhesives, no risk to original panels. The plate adheres securely using automotive-grade 3M tape and precisely located clips designed to match the LC250's existing mounting points. It can be removed cleanly if needed, making it ideal for lease vehicles or owners who prefer reversible modifications. What's Included 🛡️ Seat Protection Kick Plate × 1 304 stainless steel, LC250-specific profile 🔧 Mounting Hardware Pre-applied 3M tape and locating clips included 📋 Installation Guide Step-by-step fitting instructions Product Highlights Precision-formed to match the LC250 seat base profile exactly Grade 304 stainless steel — corrosion-resistant and long-lasting Available in silver, black, and carbon pattern finishes No-drill, damage-free installation — safe for leased vehicles Shields lower panels from boot scuffs, mud, and heavy wear Preserves original flooring and upholstery beneath the seat Easy to clean — smooth steel surface wipes down in seconds Removable cleanly without residue or panel damage Low-profile design integrates with factory interior styling Ideal for both urban daily use and off-road adventure conditions Compatibility Vehicle Generation / Code Years Fit Toyota Land Cruiser Prado 250 Series (LC250) 2024–2025 Direct Fit Toyota Land Cruiser Prado 150 Series (LC150) 2009–2023 Not Compatible Toyota Land Cruiser 300 Series (LC300) 2021–2025 Not Compatible Toyota Land Cruiser 200 Series (LC200) 2007–2021 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean and degrease the mounting surface on the lower seat base and adjacent trim panel using an IPA wipe or similar prep solution. Allow to dry completely. Dry-fit the kick plate against the seat base to confirm alignment and check that all locating clips seat correctly in their designated positions. Peel the backing from the pre-applied 3M double-sided tape and carefully position the plate, pressing firmly from the centre outward to eliminate air pockets. Apply firm, even pressure along the entire plate for 30–60 seconds to ensure full tape adhesion and clip engagement. Allow a minimum of 1 hour before exposing the plate to heavy use, particularly in cold ambient temperatures, to allow the adhesive to cure fully. ⚠ Note: Do not attempt installation on a damp, dusty, or freshly valeted surface. Ensure the panel temperature is between 10°C and 38°C for optimal adhesive bonding. Inspect all clips before fitting — do not force any component. Complete Your LC250 Interior Browse our full range of Toyota Land Cruiser LC250 accessories — from door sill protectors to interior trim upgrades — all selected and tested for the 250 Series platform. Shop All LC250 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Toyota Motor Corporation. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Compatibility information is provided in good faith — please verify against your specific vehicle configuration before purchase.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Stainless Steel Silver A-Pillar Tweeter Speaker Covers for Range Rover Vogue L460 (2023) Precision-cut stainless steel covers that dress the A-pillar tweeter housings in polished silver — a subtle but distinctly premium upgrade to the L460's already sophisticated cabin. Range Rover Vogue L460 2023 Stainless Steel Silver Finish A-Pillar Interior Tweeter Covers Adhesive Fit ISO9001 Pair Included Overview The Range Rover Vogue L460 represents Land Rover's most refined expression of luxury motoring — a cabin engineered with exacting attention to material quality, tactile detail and visual coherence. Every surface is considered, which is precisely why the factory A-pillar tweeter housings present such a worthwhile opportunity for those who want to push that sense of finish just a little further. These stainless steel A-pillar tweeter covers are designed specifically for the 2023 L460 platform. Cut and formed from premium-grade stainless steel, each piece arrives with a polished silver finish that complements the interior's chrome and brushed metal accents without competing with them. The result is a cleaner, more jewellery-like appearance around the tweeter aperture — one that looks factory-correct rather than aftermarket. Installation is non-destructive and takes under ten minutes per side. The covers use a pre-applied double-sided adhesive backing to bond directly to the existing tweeter housing, leaving no trace when removed and no modification to the vehicle's original trim. For L460 owners who care about getting every detail right, this is exactly the kind of thoughtful addition that makes the difference. What's Included 🔩 Driver Side Cover A-pillar tweeter, left-hand position 🔩 Passenger Side Cover A-pillar tweeter, right-hand position 🔲 Pre-Applied Adhesive Double-sided tape, factory applied to reverse 📄 Fitting Guide Step-by-step installation reference Product Highlights Premium-grade stainless steel construction for lasting durability in daily use Polished silver finish aligned to L460 interior metallic accent tones Precision-cut profile designed to fit the 2023 Vogue L460 A-pillar tweeter exactly Pre-applied double-sided adhesive for a clean, tool-free installation Non-destructive fit — fully reversible with zero damage to OEM trim Corrosion-resistant material suitable for all climates and long-term cabin use Manufactured to ISO9001 quality management standards Sold as a matched pair for driver and passenger sides Adds visual coherence between tweeter housings and surrounding metal trim Subtle upgrade that appears factory-integrated rather than aftermarket Compatibility Model Platform Year Range Fit Range Rover Vogue L460 2023 Direct Fit Range Rover Vogue L460 2022 Verify Before Purchase Range Rover Vogue L460 2024–2026 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the A-pillar tweeter housing surfaces are free of dust, grease or any residue that could affect adhesive performance. Use an isopropyl alcohol wipe to clean the exact area where each cover will sit. Allow to dry fully before proceeding. Dry-fit each cover against its respective tweeter housing to confirm alignment and check that the profile seats flush around the aperture perimeter. Peel the protective backing from the pre-applied double-sided adhesive on the reverse of the driver-side cover. Align carefully and press firmly into position, applying even pressure across the entire face of the cover for 30–60 seconds to activate the adhesive bond. Repeat the process for the passenger-side cover, again holding under firm pressure for a full 30–60 seconds. Allow the adhesive to cure undisturbed for a minimum of one hour before touching or adjusting either piece. Note: Do not attempt installation in temperatures below 10°C as adhesive performance may be compromised. If you have any questions about fitment or the installation process, contact our team at +44 203 943 9919 (Monday–Friday, 9am–7pm). Every Detail, Considered Browse our full collection of interior trim upgrades for the Range Rover Vogue L460 — each piece selected to complement the vehicle's design language rather than distract from it. Shop Range Rover L460 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue L460 · Interior Audio Trim Stainless Steel Silver Roof Speaker Surrounds for Range Rover Vogue L460 2023 Precision-cut stainless steel speaker surrounds that elevate the roof-line audio presentation of your 2023 Range Rover Vogue L460 with a refined, factory-matched silver finish. Range Rover Vogue L460 2023 Model Year Stainless Steel Silver Finish Roof Speaker Trim Interior Upgrade Set of 2 No Drilling Required Overview The fifth-generation Range Rover Vogue L460 represents the pinnacle of Land Rover's luxury engineering — a cabin defined by clean surfaces, considered material choices, and an atmosphere that rivals the finest grand tourers. Every detail inside the L460 has been curated with intent, and the roof-mounted speaker housings are no exception. For owners who have invested in this level of vehicle, aftermarket interior trim should meet the same standard. These stainless steel silver roof speaker surrounds are engineered specifically for the 2023 Range Rover Vogue L460. Precision-formed from high-grade stainless steel and finished in a polished silver tone, they sit flush against the headliner and frame the speaker apertures with a clean, architectural edge. The result is a subtle yet unmistakable uplift to the roofline interior — one that catches light without shouting for attention. Designed for direct fitment with no permanent modification required, the surrounds bond cleanly to the existing speaker housings using pre-applied double-sided adhesive. Whether you're refreshing a well-loved interior or adding a considered finishing touch to a newer vehicle, these pieces deliver the kind of detail-led improvement that Range Rover ownership deserves. What's Included 🔊 Stainless Steel Speaker Surround × 2 Polished silver finish, pre-cut for L460 roof speaker housings 🔧 Pre-Applied Adhesive Backing Double-sided tape bonded to each piece for clean, tool-free fitting 📄 Installation Guide Step-by-step instructions included in the box Product Highlights Precision-engineered for the 2023 Range Rover Vogue L460 — direct fit, no modifications High-grade stainless steel construction resists corrosion, warping, and daily wear Polished silver finish complements factory chrome and brushed aluminium interior accents Flush-mount profile sits cleanly against the headliner without gaps or proud edges Pre-applied double-sided adhesive ensures a secure, vibration-resistant bond Supplied as a matched pair for symmetrical, factory-quality presentation No drilling, cutting, or permanent alteration to the vehicle required Lightweight construction adds zero perceptible weight to the headliner assembly Easy to clean and maintain — simply wipe with a microfibre cloth Elevates the roofline interior detail without disrupting the L460's refined aesthetic Compatibility Model Code Year Range Fit Range Rover Vogue L460 2023 Direct Fit Range Rover Vogue L460 2022 Verify Before Purchase Range Rover Vogue L460 2024–2026 Verify Before Purchase Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner  ·  ⏱ Estimated Time: 15–20 minutes Ensure the vehicle interior is at room temperature — cold headliner surfaces can reduce adhesive bond strength. Using a clean microfibre cloth, thoroughly degrease the surface of each existing roof speaker housing where the surround will sit. Dry-fit each surround before committing — confirm the profile sits flush and the cutouts align cleanly with the speaker grille. Peel the protective film from the pre-applied double-sided adhesive on the first surround. Position carefully and press firmly into place, applying even pressure across the full surface for 30–60 seconds to activate the adhesive bond. Repeat for the second surround. Allow 1–2 hours before disturbing to allow the adhesive to fully cure. ⚠ Note: Confirm your exact model year and interior speaker configuration before installation. Adhesive-bonded trim pieces should be fitted with care — removal after curing may risk headliner surface damage. If in doubt, consult a professional vehicle interior specialist. Complete Your L460 Interior Browse the full Victorious range of precision interior accessories designed exclusively for the Range Rover Vogue L460 — from trim overlays to ambient lighting upgrades. Shop Range Rover Vogue L460 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Trim Stainless Steel Silver Door Speaker Cover Trim — Land Rover Discovery 4 LR4 (2010–2016) A precision-cut set of four stainless steel speaker cover trims that elevate the Discovery 4's cabin with a clean, durable, and factory-coherent finish. Discovery 4 · LR4 2010–2016 Stainless Steel Silver Finish Door Speaker Trim Interior Accessories Adhesive Fit Set of 4 Overview The Land Rover Discovery 4 — known internationally as the LR4 — is one of the most capable and characterful SUVs ever produced. Built between 2010 and 2016, it carries a purposeful interior design that rewards thoughtful upgrades. Owners who live with the Discovery 4 day-to-day know that small refinements to the cabin environment make a meaningful difference to how the vehicle feels — not just how it looks. These stainless steel door speaker cover trims are engineered specifically for the Discovery 4's four-door layout. Each piece is cut from high-grade stainless steel and finished in a brushed silver tone that complements the vehicle's existing interior metalwork and switchgear. Where factory plastic speaker surrounds can appear dated or scuffed with age, these trims restore a sense of precision and quality to one of the cabin's most frequently noticed surfaces. The installation relies on pre-applied double-sided adhesive, meaning no drilling, no panel removal, and no risk of damage. The result is a transformation that takes minutes but lasts for the life of the vehicle — exactly the kind of upgrade Discovery 4 owners appreciate. What's Included 🔲 Front Left Speaker Trim Driver's door — stainless steel, brushed silver 🔲 Front Right Speaker Trim Passenger door — mirror matched pair 🔲 Rear Left Speaker Trim Rear driver's side door — full set coverage 🔲 Rear Right Speaker Trim Rear passenger door — completes the set Product Highlights Precision-cut stainless steel construction for long-term durability Brushed silver finish complements Discovery 4 interior tones Custom-profiled to match factory door speaker apertures exactly Pre-applied 3M-grade double-sided adhesive backing included No drilling, cutting, or panel disassembly required Resistant to UV fading, humidity, and cabin temperature swings Protects speaker grilles from scuffs and everyday wear Full set of four — covers all four doors in one purchase Corrosion-resistant stainless steel — no peeling or tarnishing Clean, symmetrical finish consistent across all four doors Compatibility Vehicle Code Years Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Not Compatible Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the vehicle has been parked indoors or in a warm environment — adhesive bonds most effectively above 15°C (59°F). Using a clean microfibre cloth and isopropyl alcohol (IPA), thoroughly degrease the surface of each factory speaker surround. Allow to dry completely before proceeding. Test-fit each trim piece without removing the adhesive backing. Confirm alignment and orientation — note that front and rear trims may differ subtly in profile. Peel the adhesive backing from one trim piece. Position carefully from one edge, pressing firmly across the full surface to eliminate any air gaps. Apply firm, even pressure for 30–60 seconds per piece. Repeat for all four doors. Allow a minimum of 2 hours before exposing the trims to moisture or extreme temperatures. Full adhesive cure is achieved within 24 hours. ⚠ Note: Do not apply these trims over cracked, flaking, or heavily soiled surfaces. Ensure all four trims are orientated correctly before committing — repositioning after adhesive contact may reduce bonding strength. If in doubt, contact our team before installation. Upgrade Your Discovery 4 Interior Browse the full range of Discovery 4 interior accessories at Victorious Automotive — trusted by over 12,300 verified Land Rover owners worldwide. Shop Discovery 4 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Range Rover Vogue L460 · Interior Trim Stainless Steel Silver Speaker Covers — Range Rover Vogue L460 2023 Six precision-cut stainless steel speaker covers engineered exclusively for the Range Rover Vogue L460, delivering a refined, factory-grade silver finish that elevates the cabin without a single drill hole. L460 2022–2026 Stainless Steel Silver Finish Interior Trim Speaker Covers Drill-Free Fit Set of 6 ISO9001 Quality Overview The Range Rover Vogue L460 represents the most technologically refined and design-forward generation of Range Rover to date. Its interior sets a benchmark for luxury SUVs globally — and for owners who understand that every detail matters, even the smallest trim elements deserve the same level of attention as the vehicle itself. These stainless steel speaker covers are cut and finished specifically for the L460's door speaker apertures. The polished silver surface mirrors the cabin's architectural lines, replacing the standard finish with something noticeably more premium. Whether your Vogue is finished in a light or dark interior palette, the neutral silver tone integrates cleanly with the surrounding trim. Manufactured in an ISO9001-certified facility, these covers are made from genuine high-grade stainless steel — not chrome-effect plastic or coated alloy. They resist scratching, tarnishing, and everyday wear, ensuring the interior continues to look as sharp in three years as it does on the day of installation. What's Included 🔊 Speaker Covers × 6 Full set for all door speaker positions 🔧 Pre-Applied Adhesive Double-sided tape pre-fitted to each cover 📄 Installation Guide Step-by-step fitting instructions included ✅ Quality Check Certificate ISO9001 inspection passed before dispatch Product Highlights Genuine high-grade stainless steel construction throughout Polished silver finish with deep, consistent lustre Precision-cut to match L460 speaker aperture dimensions exactly Drill-free installation — no damage to factory trim Pre-applied industrial-strength double-sided adhesive backing Resistant to scratching, tarnishing, and UV discolouration Manufactured in an ISO9001-certified quality facility Full set of 6 covers — front and rear doors included 100% brand new — not a refurbished or used component Compatible with all trim and interior colour variants of the L460 Compatibility Model Code Year Range Fit Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Estimated Time: 15–20 minutes  ·  🟢 Difficulty: Easy — No Tools Required Thoroughly clean each speaker surround area with an IPA (isopropyl alcohol) wipe to remove any dust, grease, or residue. Allow the surface to dry fully before proceeding. Hold each cover against its corresponding speaker aperture to confirm correct fitment and orientation before removing the adhesive backing. Peel away the protective film from the double-sided adhesive on the rear of the first cover. Carefully align the cover with the speaker surround and press firmly into position, applying even pressure across the entire surface for 30–60 seconds. Repeat for all remaining covers. Avoid disturbing the covers for at least 24 hours to allow the adhesive bond to fully cure. ⚠ Note: Ensure the interior temperature is above 10°C during installation for optimal adhesive performance. Do not attempt to remove or reposition covers once bonded — doing so may compromise the adhesive or mark the surrounding trim. Complete Your L460 Interior Explore the full Victorious range of interior trim upgrades designed exclusively for the Range Rover Vogue L460 — from door handle surrounds to centre console overlays, all precision-engineered to the same standard. Shop Range Rover L460 Collection → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · BMW X5 · Interior Trim Stainless Steel Speaker Tweeter Cover Trim Set – BMW X5 F15 Precision-fitted stainless steel audio speaker covers that elevate your X5 F15's interior with refined, automotive-grade styling. BMW X5 F15 2014–2017 Stainless Steel Audio Trim Interior Upgrade Overview The BMW X5 F15 deserves interior details that match its commanding presence on the road. These stainless steel speaker tweeter covers transform a utilitarian component into a design statement—adding visual weight and premium finish to your door panels and dashboard surrounds. Crafted from automotive-grade brushed stainless steel, this two-piece trim set is engineered for direct fitment on F15 models (2014–2017). Each cover is precision-cut to align seamlessly with existing speaker openings, requiring no drilling, modifications, or special tools. The finish resists fingerprints and minor corrosion, maintaining its refined appearance through years of daily driving. Whether you're refining a stock interior or completing a bespoke cabin upgrade, these tweeter covers deliver the kind of understated sophistication that separates a well-considered X5 from an ordinary one. What's Included 🔧 Stainless Steel Tweeter Covers 2-piece set, brushed finish 📋 Installation Guide Step-by-step instructions included ✓ Adhesive Backing Pre-applied, no additional materials needed 📦 Protective Packaging Covers arrive damage-free, ready to fit Product Highlights Direct fit for BMW X5 F15 (2014–2017) – no modifications needed Automotive-grade brushed stainless steel – corrosion-resistant finish Precision-engineered tolerances for seamless alignment with speaker openings Pre-applied adhesive backing – clean, permanent installation in minutes Fingerprint-resistant surface – maintains appearance with minimal maintenance Conservative design that complements any interior colour or trim package 2-piece set covers all front tweeter locations for visual symmetry Lightweight – does not affect vehicle weight or balance Includes detailed installation guide with panel removal notes 30-day money-back guarantee – risk-free upgrade Compatibility Model Year Range Status BMW X5 F15 2014–2017 Direct Fit BMW X5 F16 (2nd Gen) 2018–2023 Not Compatible BMW X5 G05 (3rd Gen) 2024+ Not Compatible BMW X5 E53 2000–2006 Not Compatible Installation Difficulty: Beginner · Time Required: 15–20 minutes Locate the tweeter speaker openings on your door panels (typically upper corner near A-pillar and mid-door area). Gently pop the door panel trim using a soft plastic pry tool to access adhesive mounting surfaces without damage. Clean the target area with a dry microfibre cloth to ensure proper adhesive contact. Avoid solvents. Carefully peel the protective backing from the adhesive side of the stainless steel cover. Align the cover opening with the speaker and press firmly for 10 seconds to secure. Reinstall the door panel trim and test audio output. No further fasteners required. ⚠ Important: Ensure your X5 is F15 generation before purchasing. Verify fitment photos match your speaker location. If you're unsure, contact us at +44 203 943 9919 (Mon–Fri, 9am–7pm) for compatibility confirmation. Ready to Refine Your X5? These stainless steel tweeter covers are the kind of interior upgrade that catches the eye of fellow enthusiasts while remaining invisible to casual passengers—refined, purposeful, and unmistakably premium. Transform your F15 interior today with Victorious Automotive. Shop Now Use code 22GET20 for 20% off when you buy any 2 items. ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS, TNT 🛡️ 30-day money-back guarantee 📞 +44 203 943 9919 – Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with BMW, Bayerische Motoren Werke AG, or any official BMW division. All vehicle names, logos, and trademarks are the property of their respective owners and are used only for descriptive purposes.

Victorious · Toyota Land Cruiser LC300 · Exterior Trim Stainless Steel Tailgate Decoration Strip – LC300 Premium protective trim that elevates tailgate design while defending against road damage and wear. LC300 2021–2024 Stainless Steel Exterior Trim Protective Overview The Toyota Land Cruiser LC300 is a commanding expedition vehicle demanding equally commanding details. This stainless steel tailgate decoration strip is engineered to enhance the rear profile while serving a genuine protective function—a hallmark of purposeful design. Crafted from premium stainless steel, this trim piece sits flush along your tailgate, adding refined visual depth and a touch of polished luxury. Beyond aesthetics, it deflects minor scratches, dust accumulation, and weathering that naturally occurs during active off-road and urban use. Installation is straightforward via premium adhesive backing. The design integrates seamlessly with LC300 bodywork, requiring no drilling or modification. Clean lines, durable finish, no compromise. What's Included 📦 Stainless Steel Strip Precision-cut, polished finish 🧴 Adhesive Backing 3M automotive-grade 📋 Installation Guide Step-by-step instructions 🧼 Prep Cloth Surface cleaning & degreasing Product Highlights Stainless steel construction resists corrosion and oxidation Polished finish complements modern LC300 aesthetic Protects tailgate from scratches, scuffs, and minor impact Available in polished silver or matte black finishes 3M adhesive backing—no drilling or fasteners required Direct-fit design; no trimming or modification needed Withstands extreme temperatures and UV exposure Easy to clean; maintains lustre with standard wash routine Lightweight addition; no impact on fuel economy 30-day money-back guarantee on all finishes Compatibility Model Year Range Fit Status Toyota Land Cruiser LC300 2021–2024 Direct Fit Toyota Land Cruiser LC250 2024+ Not Compatible Toyota Land Cruiser 200 Series 2007–2021 Not Compatible Installation Difficulty: Beginner | Time: 20 minutes Park vehicle on a level surface and engage handbrake. Allow tailgate to cool if recently driven. Using the included prep cloth, thoroughly clean the tailgate surface where the strip will sit. Remove all dirt, wax, and residue. Dry completely with a clean microfibre cloth. Any moisture will compromise adhesive bond. Peel backing from one end of the adhesive strip and position it carefully on the tailgate. Press firmly at one point to anchor. Slowly peel the remaining backing while pressing the strip down with steady, even pressure to avoid air bubbles. Once fully adhered, allow 24 hours before washing or exposing to rain. Adhesive requires full cure. Important: Surface temperature should be between 15–25°C for optimal adhesive performance. Do not install in direct sunlight or extreme cold. Why Victorious This tailgate strip is one of dozens of LC300 exterior refinements in our collection. Each piece is selected for direct fitment, material integrity, and visual coherence. We don't stock universal trim—only thoughtfully engineered upgrades that respect your Land Cruiser's design. Ready to upgrade your LC300? Add refined protection and presence to your tailgate. Browse our complete LC300 exterior collection or explore other premium accessories for your expedition vehicle. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 · 12,300+ Reviews 🚚 Worldwide · DHL, FedEx, UPS ✓ 30-Day Money-Back Guarantee Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Toyota, Land Rover, Jaguar Land Rover, or any vehicle manufacturer. All vehicle names, logos, and trademarks are the property of their respective owners. Product descriptions are for compatibility and fitment purposes only.

Victorious · LC300 · Interior Protection Stainless Steel Threshold Protective Cover – LC300 Premium threshold protection that preserves your Land Cruiser's sill from daily wear while adding a refined finish to your interior entry points. LC300 2021–2024 Stainless Steel Interior Trim Easy Install Overview The Toyota Land Cruiser 300 is a masterpiece of engineering and durability. Over time, door thresholds take a beating—from daily passenger entry, luggage loading, and the natural wear that comes with adventure. This isn't just cosmetic; a damaged threshold can undermine the visual cohesion of an otherwise immaculate interior. Our Stainless Steel Threshold Protective Cover is precision-engineered for the LC300 (2021–2024) and serves a dual purpose: it shields your original threshold from scratches, scuffs, and discolouration whilst elevating the interior aesthetic with a professional, luxury finish. Unlike generic covers, this is crafted from high-grade brushed and particle-pattern stainless steel—materials that age beautifully and resist fingerprints and corrosion. Available in Black Brushed, Silver Brushed, and Silver Particle Pattern finishes, with both low-profile (A Type) and elevated (B Type) configurations, you can choose the look that best suits your interior philosophy. Installation is straightforward using precision adhesive—no drilling, no permanent modifications. What's Included 🛡️ Stainless Steel Cover Set 1x protective threshold cover for LC300 📋 Installation Guide Step-by-step instructions included ✓ Pre-Fitted Design Engineered for perfect LC300 fitment 🎨 Premium Finishes Multiple colours to suit your style Product Highlights Premium stainless steel construction for durability and corrosion resistance Three finish options: Black Brushed, Silver Brushed, Silver Particle Pattern A Type (low) and B Type (high) configuration choices for different interior styles Precision adhesive installation—no drilling or permanent modification required Protects original threshold from scratches, scuffs, and UV discolouration Seamless fitment designed specifically for LC300 (2021–2024) Professional, luxury aesthetic that elevates interior presence Fingerprint and dirt resistant finish Quick, tool-free installation in under 30 minutes Part of a comprehensive LC300 interior protection range Compatibility Model Year Range Direct Fit Toyota Land Cruiser 300 2021–2024 ✓ Direct Fit LC300 Earlier Models Pre-2021 Not Compatible LC250 2024+ Not Compatible Installation Difficulty: Easy | Time: 20–30 minutes Clean and dry the threshold surface thoroughly with a soft cloth and mild degreaser. Align the cover with the threshold opening—test fit without adhesive first. Once satisfied with placement, peel the backing from the adhesive strip. Press the cover firmly onto the threshold, working from one end to the other. Apply steady pressure for 60 seconds to ensure secure bonding. Allow adhesive to cure for 24 hours before passenger entry or cleaning. Important: Vehicle must be on level ground during installation. Ensure threshold is completely clean and dry before application. Do not expose to moisture for 24 hours after installation. Protect Your LC300 In Style Small details matter. Your Land Cruiser deserves interior protection that matches its premium calibre. This stainless steel threshold cover is an investment in longevity and aesthetics—the kind of thoughtful upgrade that discerning owners appreciate. Shop LC300 Accessories Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide Shipping (DHL, FedEx, UPS, TNT) +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with Toyota, Land Cruiser, or any official Toyota entity. All product names, logos, and brands belong to their respective owners. This product is designed for the Toyota Land Cruiser 300 and is sold as an aftermarket accessory only.

Victorious · Land Cruiser LC300 · Interior Stainless Steel Treadplate Door Sills for LC300 Premium stainless steel sills that blend timeless elegance with everyday protection for your 2021–2024 Land Cruiser. LC300 2021–2024 Stainless Steel Door Sills Interior Trim Overview The Land Cruiser LC300 is a premium off-road icon that deserves hardware matching its calibre. These stainless steel treadplate door sills transform your entry points from basic trim to a statement of craftsmanship—protecting your sills from scuffs while adding a distinctly sophisticated look to your cabin. Each sill is precision-engineered from marine-grade stainless steel and finished with your choice of polished silver, refined black, or textured carbon fibre effect. Unlike generic adhesive trim, these pieces are designed specifically for the LC300's geometry, ensuring perfect fitment and a flush, integrated appearance that doesn't look retrofitted. Installation is straightforward paste-and-press, taking less than 30 minutes per set. The finish resists salt spray, UV fading, and daily wear—so your LC300 looks as intentional in five years as it does today. What's Included 📦 Complete Sill Set Four treadplate pieces, all LC300 doors 🧴 Pre-Applied Adhesive Factory-bonded, ready to install 📋 Installation Guide Step-by-step with visual references ✓ 30-Day Returns Money-back guarantee, no questions Product Highlights Marine-grade stainless steel construction—zero corrosion risk Three finish options: Silver, Black, Carbon Fibre Pattern Precision-cut for LC300 door geometry—perfect flush fit Pre-applied high-grip adhesive—no additional supplies needed Treadplate surface prevents slipping when entering wet Factory-sealed to resist salt spray and UV degradation Scratch and scuff resistant—protects paint and trim beneath Lightweight aluminium backing—no panel stress Easy removal if needed—no permanent damage Proudly fitted to LC300s across Europe, Middle East, Asia-Pacific Compatibility Vehicle Model Years Fitment Toyota Land Cruiser 300 (LC300) 2021–2024 Direct Fit LC300 (2025+) 2025 onwards Verify First Land Cruiser LC250 All years Not Compatible Other Toyota models All Not Compatible Installation Notes Difficulty: Easy | Time: 20–30 minutes Clean door sills thoroughly with mild soap, water, and a microfibre cloth. Dry completely and allow 10 minutes for evaporation. Peel the protective backing from the adhesive side of each treadplate, starting with the driver's door. Align carefully with the door sill edge, working from the rear towards the foot well for best contact. Press firmly for 30 seconds along the entire length, ensuring no air bubbles remain. Allow 24 hours of cure time before entering and exiting the vehicle. Repeat for remaining three doors using the same process. ⚠ Important: Do not wash the vehicle or subject door sills to water for 48 hours after installation. Ensure your LC300 is parked in a dry, sheltered space during cure time. Ready to Elevate Your LC300 These treadplates aren't just trim—they're a commitment to the kind of thoughtful ownership that keeps your Land Cruiser looking premium. Order now and get 20% off when you buy any 2 items with code 22GET20. Shop LC300 Collection ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide shipping via DHL, FedEx, UPS 📞 Call +44 203 943 9919 Mon–Fri 9am–7pm ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, or Jaguar Land Rover. All product names and logos remain the property of their respective owners. This product is designed for fitment only and does not modify vehicle performance or safety systems.

Victorious · Toyota LC300 · Interior Protection Stainless Steel Tailgate Sill Protector for Toyota Land Cruiser 300 (2021–2024) Premium 304 stainless steel threshold protection that guards against scuffs while elevating your LC300's interior finish. LC300 2021–2024 304 Stainless Steel Tailgate Protection Adhesive Installation Overview Your Toyota Land Cruiser 300 is a statement of capability and refinement. The tailgate threshold endures constant contact—every entry and exit leaves its mark. Over time, scuffs and wear compound, dulling the interior's premium appearance. This stainless steel sill protector is engineered to intercept that wear before it reaches your vehicle's threshold. Available in three finishes—Black Brushed, Silver Brushed, and Grain Texture—it blends seamlessly with your LC300's interior architecture while delivering genuine durability through high-grade 304 stainless steel construction. Installation is straightforward: the precision-engineered adhesive backing requires no drilling, no fasteners, and no permanent modifications. Fit is exact to your LC300's original dimensions, making this an essential upgrade for owners who expect both protection and aesthetics. What's Included ✓ Tailgate Sill Protector 1x precision-cut 304 stainless steel guard ✓ Adhesive Backing Industrial-grade paste-on installation Product Highlights 304 stainless steel—corrosion-resistant, premium-grade material Three finish options: Black Brushed, Silver Brushed, Grain Texture Exact fit for LC300 (2021–2024) threshold dimensions Seamless wire-drawing finish—refined, professional appearance Adhesive installation—no drilling, no permanent modifications Shields tailgate sill from daily wear, scuffs, and abrasion Compatible with both 5-seat and 7-seat LC300 configurations Easy removal without damage if needed in future Lossless installation—clean, invisible mounting Elevates interior aesthetics while protecting underlying trim Compatibility Model & Year 5-Seat 7-Seat Toyota Land Cruiser 300 (2021–2024) Direct Fit Direct Fit Note: Internally, 5-seat and 7-seat LC300 models differ slightly, but the tailgate sill and threshold geometry are identical. This protector fits both configurations without modification. Installation Difficulty: Beginner · Time: 10–15 minutes Clean the threshold: Use a microfiber cloth and mild detergent to thoroughly clean the tailgate sill. Remove all dust, debris, and residue. Allow to dry completely. Inspect the backing: Peel back a corner of the adhesive backing to confirm the protective layer is intact. Do not remove the full backing yet. Position carefully: Align the protector with the threshold. Start at the center and work outward to ensure symmetry. The adhesive will not bond permanently until full pressure is applied. Apply firm pressure: Once positioned, peel away the adhesive backing slowly while pressing the protector firmly onto the sill. Use a rubber mallet or soft block to ensure full, even contact across the entire length. Allow full cure: Do not subject the tailgate to heavy use for at least 24 hours, allowing the adhesive to achieve maximum bond strength. Important: Do not install in temperatures below 10°C or above 30°C. Ensure the vehicle is parked on level ground and the sill is completely dry before application. Protect Your LC300 Today Premium stainless steel tailgate protection engineered for owners who demand both durability and refinement. Preserve your Land Cruiser's interior condition with precision-fit sill protection. Shop LC300 Interior Protection Order any 2 items and save 20% with code 22GET20 4.9/5 Stars · 12,300+ Reviews 30-Day Money-Back Guarantee Worldwide Shipping · DHL, FedEx, UPS +44 203 943 9919 · Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with Toyota, Land Rover, Jaguar Land Rover, or any official vehicle manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This product is an aftermarket accessory designed for compatibility with the specified vehicle model and is sold as-is.

Victorious Automotive · Range Rover L460 & Sport L461 · Interior Upgrades Carbon Style Start Stop Button Cover for Range Rover Vogue L460 & Range Rover Sport L461 (2023–2024) A precision-crafted carbon fibre and aluminium alloy button surround that brings a motorsport-inspired finish to the ignition area of your new-generation Range Rover — no drilling, no modification, no compromise. Range Rover L460 Sport L461 2023–2024 Carbon Fibre Style Aluminium Alloy Scratch Resistant Adhesive Fit Interior Trim Overview The 2023–2024 Range Rover Vogue L460 and Range Rover Sport L461 already set the standard for modern luxury SUV interiors — but for owners who want to push that a step further, the details matter. The start/stop button sits at the heart of the cabin experience, touched at every journey's beginning and end. It deserves to look the part. This carbon style start stop button cover is purpose-built for the L460 and L461 platforms, designed to sit flush over the OEM button surround with no visible gaps, no misalignment and no need to touch a single screw. Constructed from genuine carbon fibre weave topped with a protective resin coat, and backed with a quality aluminium alloy core, it delivers a weight and rigidity that immediately sets it apart from lower-cost alternatives. The result is a subtly elevated interior detail that complements Sport or SE specification trim levels alike — adding that distinctive carbon texture that occupants notice without overwhelming the sophisticated aesthetic Land Rover has engineered into these vehicles. What's Included 🟫 Start Stop Button Cover 1 × carbon style surround, pre-cut for L460/L461 fitment 🔲 Double-Sided Adhesive Pre-applied 3M-grade tape for secure, residue-free bonding 🧼 Cleaning Wipe Alcohol prep wipe for surface preparation before fitting Product Highlights Genuine carbon fibre weave with protective resin coating Aluminium alloy core for structural rigidity and premium feel Precision-cut profile for flush fitment on L460 and L461 platforms Scratch and wear resistant surface for long-term durability Pre-applied 3M-grade double-sided adhesive for a clean install No drilling, no modification to OEM components required Fully reversible — OEM button untouched beneath the cover Compatible with both carbon fibre and silver colourways Lightweight addition with zero impact on button function Designed and tested specifically for 2023–2024 model years Compatibility Vehicle Platform Code Year Range Fitment Range Rover Vogue L460 2023–2024 Direct Fit Range Rover Sport L461 2023–2024 Direct Fit Range Rover Vogue L405 2013–2021 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Range Rover Defender L663 2020–2024 Not Compatible Range Rover Velar L560 2018–2024 Not Compatible Installation Notes ⏱ Estimated Time: 5–10 minutes  |  🔧 Difficulty: Beginner Ensure the vehicle is parked with the engine off and ignition disengaged. Use the included alcohol prep wipe to thoroughly clean the existing start stop button surround. Allow 60 seconds to dry completely — any residue or moisture will affect adhesion. Peel the protective backing from the double-sided adhesive on the rear of the carbon cover. Carefully align the cover over the start stop button, using the pre-cut profile to guide placement. Do not press down yet — confirm alignment first. Once positioned correctly, apply firm, even pressure for 30–60 seconds to activate the adhesive bond. Allow a minimum of 2 hours before subjecting the area to vibration or moisture for optimal cure. ⚠ Note: Ensure the button surround is completely dry and free of wax, polish or dashboard protectant before fitting. Applying the cover to a treated surface may reduce long-term adhesion. Images shown are for reference purposes — minor variation in exact profile may occur across different trim specifications within the L460 and L461 range. Elevate Every Detail At Victorious Automotive, we source interior upgrades that respect the engineering of your Range Rover — not fight it. This carbon style start stop cover is one of the simplest, highest-impact changes you can make to the cabin. Browse our full collection of L460 and L461 interior accessories and save when you bundle. Shop Range Rover L460 Accessories Shop Range Rover Sport L461 Accessories Buy any 2 items and save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, affiliated with, endorsed by, or approved by Jaguar Land Rover Limited or any of its subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Start Stop Engine Button Cover — Toyota Land Cruiser 250 (2024) A precision-cut ABS cover in silver or fibre pattern finish that elevates the engine start area of your LC250 with a cleaner, more refined look — no tools required. LC250 2024 High-Quality ABS Silver & Fibre Pattern Left Hand Drive Paste Installation Interior Trim Dashboard Upgrade Overview The 2024 Toyota Land Cruiser 250 represents a serious return to form — a purpose-built, body-on-frame SUV with a cabin that blends modern technology with the durability LC owners have always demanded. The interior, while well-equipped from the factory, still leaves room for enthusiasts to personalise and refine the details that matter most. The engine start area, in particular, is one of the most frequently interacted surfaces in the cabin and one of the most visible. This start stop cover is designed specifically for the LC250's dashboard geometry, sitting flush over the factory button surround to deliver an immediate visual upgrade. Available in silver and fibre pattern finishes, it replaces the standard plastic aesthetic with something that reads more premium — sharper edges, better contrast, and a finish that holds up well to daily contact. It's the kind of detail that doesn't shout, but owners notice it immediately. Constructed from high-quality ABS and engineered to the exact dimensions of the 2024 LC250 dashboard, this cover installs in minutes using the included adhesive. There's no drilling, no cutting, and no modification to your vehicle's factory surfaces. The original panel remains fully intact beneath the cover at all times. What's Included 🔲 Start Stop Cover × 1 ABS trim piece in silver or fibre pattern finish 🔧 Adhesive Tape Pre-Applied Ready for paste installation, no extra tools needed 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-engineered fitment for the 2024 LC250 dashboard layout High-quality ABS construction for long-term durability and resistance to wear Available in silver and fibre pattern — two distinct finish options Adhesive installation means zero modification to factory surfaces Original start stop button remains fully functional after fitment Adds a premium, refined feel to one of the cabin's most-used areas Protects the OEM panel from surface scratches and daily wear Designed exclusively for left-hand drive LC250 models Slim profile sits flush without protruding or interfering with adjacent controls Clean, understated aesthetic that complements both stock and upgraded interiors Compatibility Vehicle Year Drive Configuration Fitment Toyota Land Cruiser 250 2024 Left Hand Drive (LHD) Direct Fit Toyota Land Cruiser 250 2024 Right Hand Drive (RHD) Not Compatible Toyota Land Cruiser 300 2021–2024 All Not Compatible Toyota Land Cruiser 200 All Years All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 Minutes  ·  Tools Required: None Ensure the dashboard surface around the start stop button is clean, dry, and free from dust, grease, or moisture. Use an alcohol wipe if available and allow to dry fully. Dry-fit the cover over the start stop button area to confirm alignment and confirm no interference with the button travel or surrounding controls. Peel the protective backing from the pre-applied adhesive on the reverse of the cover. Carefully align the cover over the start stop button surround, pressing gently into position from one edge to avoid air bubbles. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesion. Allow a minimum of 30 minutes before operating the vehicle to let the adhesive cure properly. ⚠ Important: This cover is designed exclusively for left-hand drive 2024 Toyota Land Cruiser 250 models. Do not attempt to fit this cover on a right-hand drive vehicle — the button placement and surrounding trim geometry differ and this product will not align correctly. Verify your vehicle's drive configuration before ordering. Shop the Full LC250 Interior Collection This start stop cover is part of our growing range of Toyota Land Cruiser 250 interior accessories. Explore the full collection to find trim upgrades, protectors, and finishing pieces that bring your LC250's cabin to the next level. Shop LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Toyota, Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious · Defender 90/110 · Exterior Protection Steel Front Lamp Guard Sets for Land Rover Defender 90 & 110 Heavy-duty headlight protection with zinc-plated construction and hinged design for easy bulb access and long-term durability. Defender 90 Defender 110 1990–2016 Steel & Zinc Hinged Design Pair Overview Your Defender's headlights are vulnerable to stone chips, debris, and off-road contact. These steel front lamp guards provide comprehensive protection for both 90 and 110 models, covering the entire lamp surround with a rugged, purpose-engineered design that doesn't compromise visibility or styling. Built from heavy-gauge steel with zinc plating for rust resistance and finished in durable black automotive powder coat, these guards are made to withstand years of genuine off-road use. The hinged construction allows quick access to bulbs and service points without removal, and installation is straightforward—supplied as a ready-to-fit pair with all necessary hardware. Whether you're tackling tight woodland tracks or protecting your investment in daily use, these guards balance serious protection with a clean, integrated appearance that respects your Defender's authentic character. What's Included 🛡️ Front Lamp Guard Pair Left & right guards, pre-assembled ⚙️ Complete Hardware Bolts, brackets & washers included 📋 Fitting Guide Step-by-step instructions 📦 Neutral Packaging Secure transit protection Product Highlights Zinc-plated steel construction for superior rust protection Black powder-coat finish resists UV fading and weathering Hinged design for tool-free bulb and ballast access Full-size coverage of entire lamp surround Heavy-gauge steel for impact and stone-chip resistance Supplied as a matching pair (left & right) Direct bolt-on installation, no cutting or modification Compatible with both Defender 90 and 110 models Authentic appearance that complements factory styling 12-month manufacturer warranty against defects Compatibility Model Years Fit Status Defender 90 1990–2016 Direct Fit Defender 110 1990–2016 Direct Fit Defender 130 1990–2007 Not Compatible Defender 2020+ 2020–Present Not Compatible Installation Notes Installation Difficulty: Easy | Time: 30–45 minutes Ensure vehicle is parked on level ground with ignition off Identify headlight mounting points on front bumper/grille area Align left guard to left headlight and secure using provided bolts and brackets Repeat on right side, ensuring both guards sit symmetrically Tighten all bolts progressively in a crisscross pattern to prevent misalignment Test hinged mechanism to confirm smooth operation and full bulb access Perform final torque check after 100 miles of driving Important: Do not over-tighten bolts; hand-tight plus ¼ turn is sufficient. If guard sits proud or misaligned, loosen all bolts and re-seat before final tightening. Ready to Protect Your Defender? Add genuine steel lamp guards to your Defender 90 or 110 and drive with confidence on any terrain. Full 12-month warranty. Free worldwide shipping on orders over £150. Shop Lamp Guards Now Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS ✅ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any official Land Rover entity. All product names and vehicle designations are used for identification purposes only.

Victorious · Land Cruiser LC300 · Interior Upgrades Steering Wheel Button Surrounds for Toyota Land Cruiser LC300 Premium interior refinement with protective, precision-fit button surrounds in carbon fibre or silver matte. LC300 2021–2024 ABS Engineering Carbon Fibre / Silver Plug & Play Install Overview The Toyota Land Cruiser LC300 is a capable, purposeful machine—and every detail of your interior should reflect that same intentionality. These Steering Wheel Button Surrounds are engineered to transform your dashboard's command centre, replacing standard plastics with precision-moulded accents that feel and look genuinely premium. Each surround is crafted from high-grade ABS polymer, chosen for its durability, thermal stability, and ability to hold fine detail. They frame the multi-function steering wheel buttons perfectly, creating a visual anchor point that draws the eye while protecting your original hardware from daily wear. Choose between authentic carbon fibre pattern—which adds motorsport-inspired contrast—or satin silver matte, which complements the modern, minimalist aesthetic of the LC300's cabin. Installation is straightforward using automotive-grade adhesive; no drilling, no permanent modification. What's Included 🎯 Steering Wheel Button Surrounds Complete set, pre-assembled 🧴 Automotive Adhesive Professional-grade bonding 📋 Installation Guide Step-by-step instructions 🧹 Prep Cloth For surface cleaning Product Highlights Carbon Fibre Pattern or Silver Matte finish options Premium ABS polymer construction, impact and UV resistant Precision-fit for LC300 steering wheel (2021–2024) Protects original steering wheel components Non-permanent installation with professional adhesive Factory appearance; no visible mounting hardware Easy cleaning with standard interior care products Thermal stable from −10°C to +60°C Enhances interior visual hierarchy and cabin ambience Backed by 30-day money-back guarantee Compatibility & Options Model Years Availability Toyota Land Cruiser LC300 2021–2024 Direct Fit Land Cruiser LC250 2024+ Not Compatible Earlier Land Cruiser Models Pre-2021 Not Compatible Installation Notes Difficulty Level: Easy | Time: 15–20 minutes Power off your vehicle and allow the cabin to reach room temperature (adhesive bonds best in stable conditions). Gently remove the protective backing from each button surround. Using the included prep cloth, thoroughly clean the steering wheel button area. Ensure no dust, oil, or residue remains. Align the surround carefully with the target button area, starting from the centre point. Press firmly and evenly across the entire surface for 10–15 seconds, working out any air bubbles toward the edges. Allow adhesive to cure for a minimum of 2 hours before using the steering wheel buttons. Surface preparation is critical. Clean steering wheel thoroughly with isopropyl alcohol (90%+) and allow to dry completely. Residual moisture or contaminants will reduce adhesive strength and may cause premature peeling. Why Choose Victorious We've been supplying serious enthusiasts and Land Rover, Range Rover, and Toyota owners for over a decade. Every product in our LC300 collection is tested for fitment and durability in real-world conditions. We stand behind our work with a 30-day money-back guarantee—no questions asked. If your surrounds don't elevate your cabin the way you expected, we'll refund you in full. Ready to Refine Your LC300 Interior? Invest in a detail that you'll notice every time you grip the wheel. Carbon fibre or silver matte—either way, your steering wheel deserves this upgrade. Shop LC300 Upgrades Use code 22GET20 for 20% off any 2 items ✓ 4.9 / 5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS, TNT shipping ✓ Mon–Fri 9am–7pm +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Range Rover, Jaguar Land Rover plc, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is an aftermarket accessory designed for compatibility with the specified vehicle model(s).

Victorious Automotive · Land Rover Discovery / Range Rover · Steering Wheel Trim Steering Wheel Button Trim Frame in Black — Land Rover Vogue, Sport, Discovery & Evoque (2013–2017) A precision-fit black decorative frame that brings clean, consistent detail to your steering wheel's button surround — purpose-built for 2013–2017 Land Rover and Range Rover models. L405 · L494 · L538 · L462 2013–2017 Gloss Black Steering Wheel Trim No-Drill Fit Interior Upgrade Laser-Cut Direct Fit Overview The 2013–2017 generation of Land Rover and Range Rover interiors — spanning the L405 Vogue, L494 Sport, L538 Evoque, and L462 Discovery Sport — share a steering wheel design that remains refined but benefits from small, considered upgrades. The button surround area, in particular, is one of those details that separates a stock cabin from one that's been thoughtfully personalised. These Steering Wheel Button Trim Frames in Black are designed to sit flush over the existing button cluster surrounds on your steering wheel, introducing a clean gloss black border that ties directly into the dark tones popular across the interiors of this model range. The result is a more cohesive, finished look — the kind of detail you notice every time you sit behind the wheel. Precision laser-cut to match the exact dimensions of the factory button layout, they require no drilling, adhesive mess, or professional fitting. If you've been looking for a low-effort, high-impact upgrade that respects the original interior design while adding something genuinely your own, this is it. What's Included 🔲 Steering Wheel Button Trim Frame × 2 Left and right button surround frames, gloss black finish 📋 Fitting Guide Step-by-step installation reference included 🧤 Protective Packaging Individual foam-lined packaging to prevent transit damage Product Highlights Precision laser-cut for an exact, rattle-free fit on 2013–2017 steering wheels Gloss black finish complements both black and tan interior colour schemes Manufactured from durable ABS — resistant to heat, UV, and daily wear No drilling, cutting, or permanent modification required Clip-fit retention system holds firmly without adhesive Covers the full perimeter of the button cluster surround cleanly Slim-profile design maintains full button travel and tactile response Compatible across four distinct model lines from a single part Achieves a factory-integrated look rather than an obvious aftermarket addition Reversible upgrade — original trim can be restored at any time Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2013–2017 Direct Fit Range Rover Evoque L538 2013–2017 Direct Fit Land Rover Discovery Sport L462 2015–2017 Direct Fit Land Rover Discovery 4 L319 2013–2016 Verify First Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park your vehicle, switch off the ignition, and allow the steering wheel to return to its natural resting position for easy access. Clean the existing button surround area thoroughly using a dry microfibre cloth to remove any dust, grease, or residue that could affect fitment. Hold the trim frame up to the button cluster to confirm alignment before fitting — the frame should sit naturally with no forcing required. Starting from one edge, press the frame firmly into position over the existing surround, working gradually around the perimeter until the clip system engages fully. Apply even, gentle pressure across the full surface to confirm the frame is seated flush with no gaps or lifted edges. Repeat the process for the second frame on the opposite button cluster, then inspect both under natural light to confirm a consistent, rattle-free fit. ⚠ Important: Always verify your specific steering wheel variant matches the product images before fitting. Some early 2013 production vehicles may have a slightly different button surround profile. If in doubt, contact us before installation at +44 203 943 9919. Browse by Model Looking for additional interior upgrades for your specific vehicle? Explore our full curated collections below: 🔗 Range Rover Vogue L405 2013–2020 accessories 🔗 Range Rover Sport L494 2013–2020 accessories 🔗 Range Rover Evoque L538 Evoque accessories 🔗 Land Rover Discovery Sport Discovery Sport accessories Complete Your Interior Every detail matters. At Victorious Automotive, we stock the accessories that Land Rover owners actually want — refined, precise, and built to last. Explore our full interior range and use code below for 20% off any two items. Shop Interior Upgrades Use Code: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Steering Wheel Button Trim in Silver & Gold — Range Rover Vogue & Sport (2014–2017) Crystal-embellished chrome steering wheel button trim that brings a bespoke, jewelled finish to the L405 Vogue and L494 Sport cabin — fitted in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2017 Chrome Finish Swarovski-Style Crystals Silver & Gold No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 were built to a standard that few rivals could match — full-width instrument panels, Windsor leather, and a cabin that genuinely felt hand-crafted. But even in that environment, the steering wheel controls can feel like a missed opportunity. Small, functional, and largely overlooked, they sit front and centre of your driving view every single day. This two-piece steering wheel button trim addresses that gap with precision. Crafted in polished chrome and finished with Swarovski-style crystals, each piece slots over your existing steering wheel controls to create a jewelled surround that reads as factory-fitted. Available in both silver and gold to complement whichever interior palette your vehicle carries — from Ivory to Ebony, or Autobiography dark-themed builds that suit the warmer gold tone beautifully. Installation requires no tools, no adhesives beyond the pre-applied tape already bonded to the trim, and no expertise beyond a clean cloth and sixty seconds of your time. For owners who want the interior to feel as considered as the exterior, this is one of the simplest and most impactful upgrades available for the 2014–2017 generation. What's Included 💎 Steering Wheel Trim Set Two-piece chrome surround with crystal detailing 🔧 Pre-Applied Adhesive Tape Factory-bonded to each piece for clean, tool-free fitting 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Polished chrome construction with premium Swarovski-style crystal detailing Available in silver and gold to match any L405 or L494 interior scheme Precision-moulded two-piece design for seamless steering wheel integration Pre-applied 3M-grade adhesive tape — no drilling, no tools, no mess Installation completed in under two minutes with zero technical knowledge required Durable chrome finish resistant to everyday contact and UV exposure Crystals are individually set and quality-checked for alignment and brilliance Does not obstruct or interfere with steering wheel button functionality Fully reversible — removes cleanly without leaving marks on original trim Tailored specifically for 2014–2017 steering wheel button cluster geometry Compatibility Model Code Years Fit Range Rover Vogue L405 2014–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Vogue L405 2018–2021 (facelift) Verify Steering Wheel Range Rover Sport L494 2018–2022 (facelift) Verify Steering Wheel Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Difficulty: Beginner  |  Time: Under 2 Minutes  |  Tools Required: None Park your vehicle safely and turn off the ignition. Allow the steering wheel to cool to room temperature if the cabin has been in direct sunlight. Using a clean microfibre cloth, thoroughly wipe down the steering wheel button surround area to remove all dust, fingerprints, and any polish residue. The surface must be completely clean and dry for optimal adhesion. Carefully peel the backing film from the pre-applied adhesive tape on both trim pieces — avoid touching the adhesive surface. Align the first trim piece over the left-hand button cluster, confirming it sits flush and centred before pressing down firmly for 10–15 seconds. Repeat the process for the right-hand piece, applying firm, even pressure across the full surface once positioned correctly. Allow the adhesive to cure for at least 30 minutes before normal driving — avoid touching or adjusting the trim pieces during this period. ⚠ Important: Do not clean the contact area with silicone-based products or wax prior to fitting — these will compromise adhesion. If removing the trim in future, use dental floss or thin fishing line to gently cut through the adhesive layer from left to right to avoid marking the original steering wheel surface. Elevate Every Mile Small details define the difference between a well-specified Range Rover and one that's been truly personalised. Browse the full collection of interior upgrades for your L405 Vogue or L494 Sport — and use the code below to save on your next two items. Shop L405 Vogue Accessories Shop L494 Sport Accessories Buy any 2 items and save 20% with code: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx & UPS 📞 Mon–Fri 9am–7pm · +44 203 943 9919 Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG — crystals featured are Swarovski-style and are not manufactured by or affiliated with Swarovski AG.

Mini · Interior · Steering Wheel Accessories Steering Wheel Center 3D Sticker for Mini Cooper Transform your cockpit with premium epoxy steering wheel centre badge — available in five distinctive design options. Mini Cooper R55 R56 R60 Clubman Countryman 3D Epoxy Self-Adhesive Overview Mini owners understand that every detail counts. Your steering wheel sits at the heart of your driving experience, commanding attention every time you grip the rim. This high-quality 3D steering wheel centre sticker elevates that focal point with the precision detail and premium finish that matches your Mini's character. Our steering wheel centre sticker features decorative epoxy construction, delivering depth, lustre, and durability that flat decals simply cannot match. Each badge is engineered to withstand daily use, temperature fluctuations, and the occasional accidental hand wash without degrading. The adhesive backing ensures a secure, permanent installation—no tools required. Whether you prefer the understated elegance of Grey Jack, the bold confidence of Red, the playful pop of Pink, or the iconic patriotic charm of Union Jack variants, this sticker redefines your Mini's interior personality in seconds. Compatible across the R55, R56, R60 generation Coopers, plus Clubman and Countryman models, it's the quickest, most affordable interior refresh on the market. What's Included 🎯 3D Epoxy Sticker One premium steering wheel centre badge ✨ Five Design Options Grey Jack, Red, Pink, Union Jack variants 🔧 Tool-Free Install Self-adhesive backing—no drilling or hardware 📋 Installation Guide Step-by-step instructions included Product Highlights Decorative 3D epoxy construction for premium depth and finish Self-adhesive backing—no fasteners, drilling, or permanent modification Five distinctive colour and design variants to choose from Durable epoxy resists UV fading, temperature swings, and moisture Compatible with Mini Cooper R55, R56, R60, Clubman, Countryman Instant interior refresh without professional installation Precise fitment to OEM steering wheel centre recess High-quality adhesive for permanent, secure mounting Adds visual personality without compromising steering functionality Part of Victorious' curated Mini interior enhancement range Compatibility Model Years Fitment Mini Cooper R55 2007–2014 Direct Fit Mini Cooper R56 2006–2014 Direct Fit Mini Cooper R60 Countryman 2010–2017 Direct Fit Mini Clubman R55 2007–2014 Direct Fit Mini Countryman R60 2010–2017 Direct Fit Mini Cooper F56 (3rd Gen) 2014+ Verify Fitment Installation Difficulty Level: Beginner | Time: 5 minutes Prepare the surface. Clean the steering wheel centre recess thoroughly with a lint-free cloth and isopropyl alcohol. Allow to dry completely (minimum 2 minutes). Position the sticker. Carefully align the sticker with the steering wheel centre, ensuring it sits evenly within the recess. Apply with pressure. Once positioned, press firmly across the entire surface for 30 seconds to activate the adhesive bond. Allow cure time. Wait 24 hours before gripping the steering wheel or exposing it to moisture. This ensures maximum adhesion. Enjoy. Your Mini's interior now commands the attention it deserves. Note: Do not apply to damp, dirty, or damaged steering wheel surfaces. Adhesion depends entirely on surface cleanliness. If removal is needed, gently peel from one edge; use rubbing alcohol to remove any residual adhesive. Ready to Elevate Your Mini? Your steering wheel is the first thing you touch every drive. Make it count. Choose your design, complete the installation in minutes, and enjoy a cockpit that reflects your taste and passion for detail. Browse All Mini Accessories Save 20% on any 2 items with code 22GET20 ⭐ 4.9/5 stars · 12,300+ reviews 🚚 Worldwide shipping via DHL, FedEx, UPS ✓ 30-day money-back guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Mini, BMW Group, or any official Mini dealer or manufacturer. All product names and logos referenced are the property of their respective owners. This product is designed to enhance and personalise your vehicle; it does not alter or impact OEM performance, safety systems, or warranty coverage. Always consult your vehicle's manual before installation.

Victorious Automotive · Range Rover Sport L461 / Evoque / Velar · Interior Trim Steering Wheel Decorative Frame Cover – Range Rover Sport L461 2023, Evoque & Velar 2021–2023 A precision-fitted interior accent that elevates your steering wheel's aesthetic with a gloss black or carbon-style finish — no tools, no fuss, no compromise. Sport L461 Evoque 2021–2023 Velar 2021–2023 ABS Construction Gloss Black Carbon Style Adhesive Fit Interior Upgrade Tool-Free Install Overview The Range Rover Sport L461, Evoque, and Velar all share a cabin philosophy built around restraint and precision — every surface considered, every detail deliberate. Owners of these vehicles don't make interior changes lightly, and rightly so. When you do choose to personalise, it has to look like it belongs. This Steering Wheel Decorative Frame Cover is designed specifically for that mindset. Engineered to sit flush against your factory steering wheel trim, it adds a layer of visual refinement without altering the structure or feel of your wheel. The result is a finish that looks specced from the factory floor — whether you choose the gloss black or the carbon-style variant. Constructed from high-grade ABS with a fade-resistant coating, this cover is built to withstand daily use in the demanding environment of a vehicle interior — resisting scratches, UV exposure, and the wear that comes from hands-on contact. It's a subtle upgrade with lasting impact. What's Included 🎛️ Steering Wheel Frame Cover 1x decorative surround in your chosen finish 🔲 Pre-Applied Adhesive Tape Automotive-grade 3M-style tape, ready to bond 📋 Installation Guide Step-by-step instructions included Product Highlights Custom-fit profile engineered for the Sport L461, Evoque, and Velar steering wheel trim Available in gloss black or carbon fibre-style finish to suit your interior spec High-grade ABS construction — lightweight, rigid, and scratch-resistant Fade-resistant coating maintains appearance under prolonged UV and heat exposure Pre-applied automotive adhesive for a clean, residue-free installation Tool-free fitment — no dismantling, drilling, or specialist knowledge required OEM-flush appearance — sits seamlessly against factory trim contours Does not interfere with steering wheel controls, airbag, or horn function Full adhesive bond achieved within 24 hours of application Pairs perfectly with matching interior trim pieces for a cohesive cabin upgrade Compatibility Model Code Year Range Fit Range Rover Sport L461 2023+ Direct Fit Range Rover Evoque L551 2021–2023 Direct Fit Range Rover Velar L560 2021–2023 Direct Fit Range Rover Vogue L460 2022+ Verify Before Order Range Rover Sport L494 2013–2022 Not Compatible Defender L663 2020+ Not Compatible Range Rover Velar L560 2018–2020 Not Compatible Compatibility is based on standard factory steering wheel trim. Please cross-reference product images with your steering wheel profile before ordering. If unsure, contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm). Installation Notes 🛠️ Difficulty: Easy  ·  ⏱️ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Park on a flat surface and ensure the vehicle is switched off. Position the steering wheel in a neutral, centred position for easier access. Thoroughly clean the steering wheel trim surface using an isopropyl alcohol wipe or lint-free cloth. Remove all dust, oils, and residue — this is critical for a lasting bond. Dry-fit the frame cover against your steering wheel trim to confirm alignment and flush contact across all edges before committing. Peel the backing from the pre-applied automotive adhesive tape. Carefully align the frame cover and press firmly into position, working from the centre outward. Apply firm, even pressure across the full surface for 30–60 seconds to activate the adhesive bond. Avoid excessive steering wheel contact for the first 24 hours to allow the adhesive to reach full cure strength. ⚠️ Note: Do not attempt installation in cold temperatures below 10°C as adhesive performance may be reduced. Ensure the steering wheel surface is completely dry before application. This cover is designed for the standard factory trim profile — aftermarket or heated steering wheel variants may differ in shape. Precision Detail for a Precision Interior Browse the full range of Sport L461 interior upgrades at Victorious Automotive — curated specifically for owners who expect every detail to be right. Shop Range Rover Sport L461 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification before purchasing.

Victorious Automotive · Toyota Land Cruiser LC250 · Interior Accessories Steering Wheel Insert for 2024 Toyota Land Cruiser 250 – Carbon Fibre & Silver Matte A precision-fit decorative insert that elevates the LC250's steering wheel with a premium carbon fibre or silver matte finish — no tools, no compromise, no trace of the original surface left unprotected. LC250 2024 Land Cruiser ABS Material Carbon Fibre Pattern Silver Matte Tool-Free Install Interior Upgrade Direct Fit Overview The 2024 Toyota Land Cruiser 250 represents a significant new chapter for one of the most respected off-road nameplates in history. With its redesigned interior placing greater emphasis on a refined, driver-focused cockpit, the LC250 cabin deserves accessories that match its ambition. The steering wheel sits at the heart of the driving experience, and its visual presence matters — especially when you spend hours behind it on long-distance touring or technical off-road terrain. This steering wheel insert has been developed specifically for the 2024 LC250, wrapping around the appropriate trim sections with an exact contour fit. Available in two finishes — a deep-weave carbon fibre pattern and a clean silver matte — the insert introduces a visual premium that the stock plastic trim simply cannot deliver. Both finishes are designed to complement the LC250's existing interior palette without clashing or looking aftermarket in the wrong way. Constructed from durable ABS with a hardwearing surface coating, this insert resists scratching, UV fading and daily contact wear. It applies via a clean adhesive bond directly to the original trim surface, leaving no permanent marks if removed. For LC250 owners who want an immediate interior upgrade that's reversible, refinished and ready in minutes, this is the most efficient starting point. What's Included 🎯 Steering Wheel Insert × 1 Precision-fit for 2024 Toyota Land Cruiser 250 🧽 Adhesive Pre-Applied Ready to install straight from the packaging 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Designed exclusively for the 2024 Toyota Land Cruiser 250 — precise contour fit with no gaps or overhang Available in Carbon Fibre Pattern and Silver Matte for two distinct interior aesthetics Premium ABS construction delivers rigidity without adding bulk to the steering wheel Surface coating resists scratching, UV exposure and everyday contact abrasion Adhesive installation requires no drilling, clipping or modification to OEM components Fully reversible — removes cleanly without damaging the original steering wheel trim Maintains airbag system integrity — no interference with safety components Adds genuine visual depth and finish quality to the LC250 cockpit environment Lightweight profile ensures no change to steering feel, balance or ergonomics Pairs seamlessly with other LC250 interior trim upgrades for a cohesive cabin finish Compatibility Vehicle Year Range Trim / Grade Fitment Toyota Land Cruiser 250 (LC250) 2024 All Grades (GX, VX, GR Sport) Direct Fit Toyota Land Cruiser 300 (LC300) 2021–2024 All Grades Not Compatible Toyota Land Cruiser 200 (LC200) 2008–2021 All Grades Not Compatible Toyota Land Cruiser Prado 150 2009–2024 All Grades Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Park the vehicle safely, turn off the ignition and allow the interior to reach ambient temperature — avoid fitting in extreme cold or heat. Thoroughly clean the steering wheel trim surface using an isopropyl alcohol wipe or clean microfibre cloth. Ensure the area is completely dry and free from dust, oils or residue. Dry-fit the insert against the steering wheel without removing the adhesive backing. Confirm the alignment and contour match before proceeding. Peel back the adhesive protective liner carefully, taking care not to touch the adhesive surface. Align the insert precisely with the steering wheel trim contour, beginning from one end and pressing firmly along the length to eliminate any air gaps. Apply firm, even pressure across the entire insert surface for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 2 hours before normal use to let the adhesive bond cure fully — avoid touching or flexing the insert during this period. ⚠ Important: Do not apply the insert over cracked, peeling or damaged original trim. Surface contamination from polish, wax or silicone-based products will significantly reduce adhesive performance. If in doubt, wipe again with isopropyl alcohol before fitting. Upgrade Your LC250 Interior Today This steering wheel insert is part of our curated Toyota Land Cruiser LC250 interior collection — all designed to the same standard of fit and finish. Browse the full range or get in touch with our team if you need advice on pairing accessories. Shop All LC250 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, authorised by, or connected to Toyota Motor Corporation or any of its subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Product images are for illustrative purposes — always verify fitment against your specific vehicle configuration before purchase.

Victorious · Toyota Land Cruiser · Interior Steering Wheel Inserts for Toyota Land Cruiser 300 (2021–2024) Elevate your LC300's interior with premium steering wheel accents that combine sophisticated styling with lasting durability. LC300 2021–2024 ABS Material Carbon Fiber / Matte Easy Installation Overview The Toyota Land Cruiser 300 is a purpose-built expedition platform—capable, refined, and commanding on any terrain. Its interior deserves accents that match that presence. Our steering wheel inserts are engineered to transform the LC300's cabin with a touch of understated luxury while protecting your original wheel from daily wear. Each insert is crafted from durable ABS plastic and finished in either a striking carbon fibre pattern or elegant silver matte. The seamless application—secured with premium adhesive—creates a factory-integrated appearance that enhances rather than overwhelms your dashboard. Whether you're a weekend adventurer or serious overlander, these inserts deliver the visual refinement your LC300 demands, backed by Victorious' 30-day money-back guarantee and legendary customer support. What's Included 📦 1x Steering Wheel Insert Ready to install with adhesive backing 📋 Installation Guide Step-by-step instructions included Product Highlights Carbon Fibre Pattern or Silver Matte finish options High-grade ABS construction for durability Premium adhesive backing for secure, permanent fit Protects original steering wheel from wear Factory-integrated appearance Seamless integration with LC300 interior design Lightweight, no impact on handling Scratch-resistant finish Easy to clean and maintain Compatible with all LC300 models 2021–2024 Compatibility Model Years Compatibility Toyota Land Cruiser 300 2021–2024 Direct Fit Toyota Land Cruiser 250 2024+ Not Compatible Toyota Land Cruiser 200 2007–2021 Not Compatible Installation Difficulty: Easy | Time: 5–10 minutes Prepare the surface: Clean the steering wheel thoroughly with a microfibre cloth and mild soap. Dry completely. Position the insert: Carefully align the insert with the steering wheel, ensuring it sits flush and centred. Apply pressure: Press firmly from the centre outward to activate the adhesive backing and eliminate air pockets. Allow to cure: Leave undisturbed for 24 hours before driving to ensure full bond strength. Enjoy: Your LC300's interior just got a serious upgrade. Note: Do not attempt removal once fully cured, as it may damage the original wheel. Ensure perfect alignment before final application. Ready to Elevate Your LC300? Premium interior refinement shouldn't be complicated. Our steering wheel inserts deliver factory-quality styling and lasting protection in minutes. Backed by our 30-day money-back guarantee and award-winning customer service. Shop LC300 Inserts Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews Worldwide shipping via DHL, FedEx, UPS +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Toyota Motor Corporation, Land Rover, Jaguar Land Rover, or any OEM manufacturer. All product names and logos are the property of their respective owners. This product is designed for cosmetic enhancement and does not affect vehicle performance or safety systems.

Jaguar Accessories · Steering Wheel · Interior Styling Steering Wheel Ring Decals for Jaguar XF, XE, F-PACE & F-TYPE Premium aluminum steering wheel badge decals with precision color-change design—elevate your cabin with OEM-inspired luxury styling. Jaguar OEM Design 2010–2026 Aluminum Alloy Color Change Finish Internal Mount DSYCAR Brand Overview Jaguar drivers demand refinement—from the moment your hands meet the wheel. These steering wheel ring decals bring factory-inspired elegance to your XF, XE, F-PACE, or F-TYPE, replacing the stock emblem with a precision-engineered aluminum piece that catches light and complements your interior in ways the original simply cannot. Crafted from premium zinc alloy with a sophisticated color-change finish, these decals deliver visual depth and modern luxury appeal. Whether you're upgrading a 2010-era XF or a current-generation F-TYPE, this detail transforms your driving experience every single time you grip the wheel. Installation is straightforward—no modifications required. These are designed as OEM-specification replacements for internal steering wheel badge mounting, so they integrate seamlessly with your vehicle's existing geometry and design language. What's Included 🎯 Steering Wheel Decal Premium aluminum ring emblem with color-change coating ✓ OEM-Spec Design Engineered to factory dimensions and mounting points 📦 Unpackaged Arrives ready to install—minimal packaging to reduce waste ⚡ Customized Finish Color-change treatment visible in varied lighting conditions Product Highlights Premium zinc alloy construction for durability and weight distribution Color-change finish reveals different hues depending on light angle and intensity OEM-specification replacement—no modification to steering wheel required Precision-engineered to Jaguar factory tolerances and mounting geometry Compatible with XF, XE, F-PACE, and F-TYPE across multiple generations Internal mounting—protected from weather and road debris exposure Creative sticker category design—balances form and function seamlessly DSYCAR brand engineering—trusted by Jaguar enthusiasts worldwide Transforms cabin ambiance without affecting steering feel or ergonomics Subtle luxury upgrade that reflects your attention to detail Compatibility Jaguar Model Years Fitment XF 2010–2026 Direct Fit XE 2015–2026 Direct Fit F-PACE 2015–2026 Direct Fit F-TYPE 2013–2026 Direct Fit Installation Notes Difficulty Level: Beginner | Time: 5–10 minutes Remove the steering wheel (or access via wheel removal if your model allows badge replacement without full wheel removal) Gently prise the existing emblem or decal from the steering wheel ring using a soft plastic tool Clean the mounting surface with a lint-free cloth and mild alcohol solution Allow surface to dry completely Position the new aluminum decal, aligning with mounting points or adhesive guides Apply firm, even pressure for 10–15 seconds to ensure full adhesion Allow 24 hours before first drive to ensure complete cure Note: If your Jaguar requires full steering wheel removal, consult your owner's manual or a qualified technician. Do not attempt removal if you are unfamiliar with steering column safety procedures. Internal airbag systems require careful handling. Complete Your Interior Upgrade These steering wheel decals are the detail your Jaguar deserves—a subtle but unmistakable mark of craftsmanship every time you drive. Pair with other interior accents to elevate your cabin further. Shop Jaguar Accessories Use code 22GET20 for 20% off any 2 items. ✓ 30-day money-back guarantee ✓ 4.9★ · 12,300+ reviews ✓ Worldwide shipping via DHL & FedEx ✓ Mon–Fri 9am–7pm UK support Disclaimer: Victorious Automotive is not affiliated with Jaguar Land Rover plc or any official Jaguar brand entity. All product names, logos, and trademarks remain the property of their respective owners. This product is designed for aftermarket personalization only.

Victorious Automotive · Range Rover Vogue L405 / Sport L494 · Steering Controls Steering Wheel Switch Upgrade for Range Rover L405 & L494 — 2013–2017 (2018-Style Fitment) Restore and refine your steering wheel controls with premium ABS and metal switches engineered to slot directly into your 2013–2017 Range Rover — delivering the clean, responsive feel your cabin deserves. L405 Vogue L494 Sport Discovery 5 LR5 2013–2019 ABS & Metal Direct Plug-In No Gaps Fast Response OEM-Style Fitment Overview The Range Rover Vogue L405 and Sport L494 represent two of Land Rover's most accomplished generations — vehicles that reward their owners with a cabin environment that feels genuinely curated. Over time, however, the steering wheel controls are among the first touchpoints to show wear. Faded legends, sluggish button response, or physical deterioration can quietly undermine the experience every time you get behind the wheel. These steering wheel switches are purpose-built for 2013–2017 L405 and L494 models, and are also compatible with the Discovery 5 LR5 from 2017–2019. Constructed from a combination of high-grade ABS and metal, they replicate the original form factor with precision — sitting flush within your steering wheel's existing cutouts without gaps, misalignment, or compromise. The button legends are crisp and clear, the travel is satisfying, and the electrical response is immediate. Unlike aftermarket parts that require wiring modifications or bracket adapters, these switches connect directly through your vehicle's existing wiring harness. The result is a factory-fresh feel that restores confidence to one of the most frequently used interfaces in the entire cabin — with no evidence that a replacement was ever needed. What's Included 🎛️ Left Steering Switch Driver-side control panel — media, phone & cruise functions 🎛️ Right Steering Switch Passenger-side panel — volume, voice & menu navigation Product Highlights Precision-engineered fitment for L405 and L494 steering wheel housings 2018-style switch design — a subtle, modern upgrade over the original Premium ABS shell with metal contacts for long-term durability Clear, legible button legends with excellent tactile definition Direct plug-in installation — uses your vehicle's existing wiring harness No gaps, no misalignment — seats flush within original steering wheel cutouts Fast electrical response with no input lag or interference Wear-resistant surface finish maintains appearance over extended use Compatible with Discovery 5 LR5 (2017–2019) as a direct replacement Sold as a pair — complete left and right switch set included Compatibility Vehicle Code Years Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Discovery 5 / LR5 L462 2017–2019 Direct Fit Range Rover Vogue L405 2018–2021 Verify Before Purchase Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–30 Minutes  ·  Tools Required: Trim removal tool, clean cloth Ensure your vehicle is parked safely with the ignition switched off and the key removed before beginning any work near the steering column. Using a trim removal tool, carefully prise the existing steering wheel switch panels away from their housing — working from the edges inward to avoid cracking the surrounding trim. Locate the wiring connectors on the rear of each switch and gently disconnect them by pressing the release tab and pulling straight back — do not tug on the wiring itself. Compare the new switches against the originals to confirm orientation, then connect each new switch to its corresponding wiring plug until you hear or feel it click into place. Seat each switch panel back into the steering wheel housing, applying even pressure across the face until it sits flush and all retaining clips engage. Restore the ignition and test all switch functions — cruise control, media, volume, and voice commands — to confirm full operation before driving. ⚠ Please Note: Always confirm your exact vehicle year and steering wheel variant before fitting. If your vehicle has a heated steering wheel or a sport multifunction wheel with additional paddle controls, verify connector compatibility first. Professional installation is recommended if you are unfamiliar with trim removal on this platform. Upgrade Your Range Rover Interior Today Explore the full range of premium interior upgrades for your L405 or L494 at Victorious Automotive — trusted by over 12,300 Range Rover owners worldwide. Shop L405 Vogue Accessories Shop L494 Sport Accessories Use code at checkout for 20% off any 2 items: 22GET20 ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle before purchase.

Victorious Automotive · Land Rover Discovery 5 · Boot Organisation Rear Boot Storage Box – Land Rover Discovery 5 LR5 L462 (2017–2018) A precision-fit plastic storage solution for the Discovery 5 boot floor — designed to organise car care sprays, bottles and accessories neatly out of sight. L462 2017–2018 Discovery 5 LR5 Black Plastic Boot Organisation Direct Fit ISO 9001 Certified Interior Accessory Overview The Land Rover Discovery 5 L462 is one of the most capable and versatile family SUVs ever produced — equally at home on a Welsh mountain track as it is on the school run. With a generous boot and third-row seating, the Discovery 5 is a vehicle that gets used hard. And with use comes clutter: screen wash, tyre inflators, detailing sprays and emergency supplies inevitably accumulate in the load bay with no dedicated home. This rear boot storage box is purpose-designed to address exactly that. Engineered to fit the specific contours of the Discovery 5 L462 boot floor, it provides a structured compartment to neatly house bottles, aerosols and car care essentials — preventing them from rolling around loose during cornering or braking. Constructed from durable, environmentally conscious plastic with a clean black finish, it integrates naturally with the Discovery 5's interior aesthetic. Unlike generic boot tidies or fabric organisers that shift and collapse under load, this rigid plastic unit stays firmly in position, maintaining its form even when fully loaded. It's a small addition that makes a meaningful difference to everyday ownership — keeping the boot usable, presentable and well-organised from day one. What's Included 📦 Boot Storage Box 1 x rigid plastic unit, black finish 🔩 Fitting Hardware All necessary clips or fixings included 📋 Installation Guide Step-by-step fitment instructions Product Highlights Precision-engineered for the Discovery 5 L462 boot floor profile Rigid plastic construction — holds shape under load Clean black finish blends with OEM interior trim Ideal for organising sprays, bottles and car care products Prevents items rolling loose during transit Environmentally conscious, durable material composition Lightweight at just 0.5 kg — no meaningful load penalty ISO 9001 certified manufacturing process No permanent modifications required for fitment Reversible installation — removable when not needed Compatibility Model Code Year Range Fit Land Rover Discovery 5 L462 / LR5 2017–2018 Direct Fit Land Rover Discovery 5 L462 / LR5 2019–2024 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Land Rover Discovery Sport L550 2014–2024 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Open the rear boot of your Discovery 5 L462 and clear the boot floor area of any existing items. Identify the designated fitment zone along the boot floor — typically along the side or rear wall depending on your variant. Align the storage box unit with the corresponding mounting points or boot floor contours. Press or clip the unit firmly into position using the included hardware until you hear or feel it seat securely. Test by gently pulling the unit to confirm it is locked in place before loading with items. ⚠ Please Note: This unit is confirmed as a direct fit for the Discovery 5 L462 model years 2017 and 2018 only. If your vehicle falls outside this range, please contact our team before ordering to confirm suitability. Boot floor configurations can vary between model year facelifts. More for Your Discovery 5 Browse our full range of Land Rover Discovery 5 accessories — from interior organisation to exterior protection, all curated specifically for the L462. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. We are not affiliated with, endorsed by, or in any way officially connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes and trademarks are the property of their respective owners and are referenced solely for the purpose of product compatibility identification.