Products

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS B Pillar Hook Cover Trim Stickers for Land Rover Discovery Sport 2015–2019 A precision-cut, silver ABS trim upgrade that conceals the factory B pillar coat hooks and brings a clean, cohesive finish to your Discovery Sport's interior — no tools required. Discovery Sport 2015–2019 L550 ABS Plastic Silver Finish B Pillar Trim Hook Cover No-Tool Fit Interior Upgrade Direct Fit Overview The Land Rover Discovery Sport (L550) is built around a refined, practical cabin designed to accommodate everyday life without sacrificing quality. The B pillar area, home to the factory coat hooks, is one of those small details that the keenest owners notice — and when left uncovered, the hook surround can look unfinished against the rest of the interior's considered design. These silver ABS B Pillar Hook Cover Trim Stickers are engineered specifically for the Discovery Sport produced between 2015 and 2019. Each cover is precision-shaped to sit flush over the existing hook housing, creating a smooth, silver-accented detail that complements both dark and light interior colour schemes. The high-quality ABS plastic construction resists flexing, fading, and everyday wear — so they'll stay looking sharp for the long haul. Installation takes only a matter of minutes. A factory-grade double-sided adhesive backing is pre-applied to each cover, meaning no drilling, no clips, and no risk of damaging your existing trim. For Discovery Sport owners who prefer their cabin to reflect the same attention to detail as the rest of the vehicle, this is a simple, effective, and affordable upgrade. What's Included 🪝 B Pillar Hook Cover Trim (x2) One for each rear B pillar — left and right sides 🔲 Pre-Applied Adhesive Double-sided tape pre-fitted to each cover — ready to install 📄 Installation Guidance Simple step-by-step fitment instructions included Product Highlights Precision-engineered profile designed specifically for the Discovery Sport L550 B pillar hook housing High-quality ABS plastic construction — impact-resistant and built to last Silver finish adds a refined, cohesive accent to your vehicle's interior trim Pre-applied factory-grade double-sided adhesive for fast, tool-free installation Covers the existing hook surround cleanly with no visible gaps or lifting edges Compatible with both standard and upgraded Discovery Sport interiors from 2015 to 2019 Resistant to UV fading, heat, and everyday interior wear Lightweight design — zero additional weight burden on the B pillar area Reversible upgrade — can be removed carefully without damaging the original trim Supplied as a matched pair so both sides of the cabin are finished identically Compatibility Vehicle Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 2020 – 2024 (Facelift) Verify Before Purchase Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Range Rover Evoque L551 2019 – 2024 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin by thoroughly cleaning the B pillar hook housing area on both sides of the cabin. Use an alcohol-based cleaner or panel wipe to remove any dust, grease, or residue. Allow the surface to dry completely before proceeding. Test-fit each cover without removing the adhesive backing, holding it in position to confirm alignment and coverage over the hook surround. Peel back the adhesive liner from the first cover, taking care not to touch the adhesive surface with your fingers. Align the cover carefully over the hook housing and press it firmly into position, working from the centre outward to avoid air pockets. Apply firm, even hand pressure across the entire cover for 30–60 seconds to ensure full adhesive contact. Repeat for the second cover on the opposite B pillar. Allow the adhesive to cure for at least 24 hours before placing any load or stress on the covers. ⚠ Important: Do not install in cold conditions below 10°C / 50°F — adhesive performance is significantly reduced in low temperatures. If your vehicle has been parked in the cold, bring it to room temperature before fitting. Ensure the surface is completely dry; any moisture will compromise the bond. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — from dashboard trim and centre console upgrades to door handle covers and storage solutions. Every product is selected for fit, finish, and long-term quality. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase. If in doubt, contact our team before ordering.

Victorious Automotive · Land Rover Discovery 4 · Interior Trim Silver ABS Seat Adjustment Frame Trim Cover Sticker — Land Rover Discovery 4 LR4 (2010–2016) A precision-cut silver trim cover that refreshes the seat adjustment frame area of your Discovery 4, delivering a cleaner, more polished cabin aesthetic with zero tools required. Discovery 4 / LR4 2010–2016 ABS Plastic Silver Finish Interior Trim Adhesive Fit Set of 2 No Drilling Overview The Land Rover Discovery 4 — known globally as the LR4 — remains one of the most capable and characterful SUVs ever produced. Built between 2010 and 2016, it earned a devoted following among those who demand both off-road performance and a refined cabin experience. For owners who continue to cherish and maintain these vehicles, keeping the interior looking sharp is every bit as important as what happens beneath the bonnet. Over time, the seat adjustment frame area of the Discovery 4 can show its age — scuffs, wear marks, and faded plastics that detract from an otherwise well-appointed cabin. These silver ABS seat adjustment frame trim covers are designed to sit flush over the existing surround, masking wear and introducing a smart, contemporary silver finish that integrates naturally with the Discovery 4's interior colour palette. Constructed from durable ABS plastic and finished in a clean, understated silver tone, these covers require no drilling, no specialist tools, and no professional fitting. The pre-applied double-sided adhesive backing ensures a secure, rattle-free bond in minutes — making this one of the most impactful quick upgrades you can make to the LR4 interior. What's Included 🪑 Seat Adjustment Trim Cover × 2 Silver ABS plastic covers for left and right seat frames 🔲 Pre-Applied Adhesive Backing 3M-style double-sided tape bonded to each cover 📋 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-cut to match the Discovery 4 seat adjustment frame profile exactly High-quality ABS plastic — impact-resistant and built to last Silver finish complements both light and dark Discovery 4 interior trims Pre-applied double-sided adhesive for a fast, tool-free installation Covers surface wear, scuffs and faded plastics on the seat frame surround Rattle-free fitment when adhesive is properly bonded to a clean surface Set of 2 covers — fits both driver and front passenger seat frames Lightweight construction adds no meaningful weight to the interior Does not interfere with seat adjustment mechanism operation Reversible — can be removed without permanent modification to the vehicle Compatibility Vehicle Code Year Range Fit Land Rover Discovery 4 / LR4 L319 2010–2016 Direct Fit Land Rover Discovery 4 / LR4 (Facelift) L319 2013–2016 Direct Fit Land Rover Discovery 3 / LR3 L319 2004–2009 Verify Before Purchase Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 / L494 All Years Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Installation Notes 🛠 Difficulty: Beginner  ·  ⏱ Estimated Time: 10–15 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry cabin — ensure the seat adjustment frame area is free from dust, grease, and moisture. Use an isopropyl alcohol wipe for best adhesion results. Dry-fit each trim cover against the seat frame before committing — confirm the profile aligns correctly with no gaps or overhangs on either side. Peel back the protective film from the adhesive side of one trim cover, taking care not to touch the adhesive surface. Align the cover carefully over the seat frame surround, pressing firmly from the centre outward to eliminate any air pockets beneath the surface. Apply firm, even pressure for 30–60 seconds across the full face of the cover to ensure the adhesive bonds securely. Repeat the process for the second cover on the opposite seat frame. Allow 24 hours for the adhesive to fully cure before operating the seat adjustment mechanism repeatedly. ⚠ Note: Surface temperature affects adhesive performance. Do not install in direct sunlight or when the interior surface temperature is above 35°C. For best results, install in a shaded environment at room temperature. Ensure the adhesive area is fully dry before application. Explore More Discovery 4 Upgrades Browse the full Victorious Discovery 4 collection — from interior trim enhancements to exterior accessories, every product is selected for fit, finish, and long-term quality. Shop Discovery 4 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, vehicle model names, and codes referenced are used solely for compatibility identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Center Console Navigation Frame Button Cover Trim — Land Rover Discovery Sport 2015–2019 A precision-fit silver ABS trim panel that frames the center console navigation controls of your Discovery Sport, instantly elevating the interior's visual detail with a clean, factory-complementary finish. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish No-Drill Install Double-Sided Adhesive 2-Piece Set Interior Upgrade Overview The Land Rover Discovery Sport (L550, 2015–2019) is a vehicle that balances everyday practicality with genuine character — and its interior reflects that. The centre console area, housing the navigation controls and surrounding button cluster, is one of the most visually prominent zones in the cabin. Over time, the stock plastic surround can look flat or worn, particularly against an otherwise refined interior. This silver ABS Navigation Frame Button Cover Trim is engineered specifically for the Discovery Sport's 2015–2019 centre console layout. Precision-cut to follow the exact contours of the button surround, each piece sits flush against the factory trim with no gaps, no rocking, and no proud edges. The silver finish introduces a subtle metallic quality that catches ambient light without being ostentatious — the kind of detail that looks considered rather than aftermarket. Made from high-grade ABS plastic, the trim is resistant to UV yellowing, temperature cycling, and the daily wear that comes from frequent contact. Installation requires no tools, no drilling, and no modification to the original panels — just a clean surface and a confident press. It's one of the most impactful low-effort interior upgrades available for the Discovery Sport at this model year range. What's Included 🪟 Navigation Frame Trim Panel × 2 Left and right centre console button surround covers, silver ABS finish 🔲 Pre-Applied Adhesive Backing Double-sided 3M-style tape pre-fitted to each panel for immediate installation 📋 Installation Guide Step-by-step fitting reference included with the set Product Highlights Precision-cut ABS panels designed specifically for the Discovery Sport 2015–2019 console layout Silver finish complements both light and dark interior colour schemes without clashing High-grade ABS construction — resistant to heat, UV fading, and surface wear Pre-applied double-sided adhesive for a confident, tool-free installation Flush-fit profile sits level with factory trim for a factory-integrated appearance 2-piece set covers the full navigation frame button surround area Lightweight panels add no perceptible weight or bulk to the console area 100% brand new — individually inspected before dispatch Reversible upgrade — can be cleanly removed without damaging OEM trim Worldwide shipping via DHL, FedEx, UPS, and TNT with tracked delivery Compatibility Vehicle Model Code Year Range Fit Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport (Facelift) L550 2020 – 2024 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Land Rover Freelander 2 L359 2006 – 2014 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 10–20 minutes  |  🔧 Tools Required: None Start with the engine off and the interior at room temperature. Ensure the centre console area is clean, dry, and free of any dust, oils, or residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit both trim panels onto the navigation frame button surround before removing the adhesive backing. Confirm the alignment and fit are correct before committing. Peel the protective liner from the pre-applied adhesive on the back of the first panel. Take care not to touch the adhesive surface. Carefully position the panel against the console surround, starting from one edge. Press firmly and evenly across the full surface for 20–30 seconds to activate the adhesive bond. Repeat the process for the second panel, ensuring both pieces align symmetrically across the console. Allow the adhesive to fully cure for a minimum of 2–4 hours before applying any pressure or cleaning products to the trim area. ⚠ Note: Do not install in cold conditions below 10°C — adhesive performance is significantly reduced at low temperatures. Ensure the OEM trim surface is fully dry before application. If removal is ever required, use a plastic trim removal tool and apply gentle, even pressure to avoid marking the original panel. Upgrade Your Discovery Sport Interior Explore the full range of Land Rover Discovery Sport interior accessories at Victorious Automotive — curated for owners who take their vehicles seriously. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle trim level and build date before purchase.

Victorious Automotive · Land Rover Discovery Sport · Interior Trim Silver ABS Gear Shift Frame Cover Trim Sticker for Land Rover Discovery Sport (2015–2019) A precision-fit silver trim sticker that instantly elevates the centre console of your Discovery Sport — clean, sharp, and built to last. Discovery Sport L550 2015–2019 High-Grade ABS Plastic Silver Finish Gear Shift Trim No Drilling Required Direct Fit Interior Accessory Overview The Land Rover Discovery Sport is a machine built for those who refuse to compromise — capable on any terrain, yet refined enough for every day. Its interior deserves the same attention to detail that went into engineering the rest of the vehicle. Over time, the gear shift surround area can begin to look worn or simply feel uninspired against the rest of the cabin's design language. This trim sticker addresses that directly. Crafted from high-grade ABS plastic with a smooth silver finish, this gear shift frame cover is designed to sit flush against the existing centre console surround on 2015–2019 Discovery Sport models. The surface finish is consistent and reflective without being garish — it complements the factory interior rather than competing with it. Whether your Discovery Sport features a light or dark interior, the neutral silver tone integrates naturally with the surrounding switchgear and materials. Installation requires no specialist tools, no drilling, and no modification to the original interior. A pre-applied double-sided adhesive backing bonds cleanly to the OEM surface, providing a firm, rattle-free hold. It's the kind of upgrade that looks factory-fitted the moment it's in place — exactly as it should be. What's Included 🎛️ Gear Shift Frame Cover Trim 1 × silver ABS sticker trim, pre-cut and adhesive-ready 🔲 Pre-Applied Adhesive Backing Double-sided tape bonded to the rear of the trim panel Product Highlights Precision-cut to match the gear shift frame on 2015–2019 Discovery Sport models High-grade ABS plastic — resistant to heat, UV fading, and daily wear Polished silver finish complements both light and dark Discovery Sport interiors Pre-applied double-sided adhesive for a secure, rattle-free bond No drilling, cutting, or specialist tools required for installation Covers minor scuffs, scratches, or wear on the original gear surround Slim profile sits flush with surrounding trim for a factory-fitted appearance Does not interfere with gear selector operation or surrounding controls 100% brand new — supplied in protective packaging to prevent transit damage Worldwide delivery available via DHL, FedEx, UPS, and TNT Compatibility Vehicle Year Range Trim / Variant Fitment Land Rover Discovery Sport L550 2015–2019 SE, HSE, HSE Luxury Direct Fit Land Rover Discovery Sport L550 2015–2019 Dynamic, Black Edition Direct Fit Land Rover Discovery Sport L550 2020–2024 (Facelift) All Variants Not Confirmed Land Rover Discovery 5 L462 2017–2024 All Variants Not Compatible Range Rover Evoque L538 2011–2018 All Variants Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Ensure the vehicle interior is at room temperature. Cold surfaces can reduce adhesive effectiveness — avoid installation in temperatures below 10°C. Thoroughly clean the existing gear shift frame surround using an isopropyl alcohol wipe or a lint-free cloth with interior cleaner. Remove all dust, grease, and residue. Allow to dry completely. Dry-fit the trim piece over the gear shift frame without removing the adhesive backing. Confirm the alignment and check that all edges sit flush with the surrounding interior surfaces. Peel back a small section of the adhesive backing and carefully position one edge of the trim against the gear shift frame, using your dry-fit reference points to guide placement. Press the trim firmly into place, working from one side to the other to eliminate any air pockets. Apply firm, even pressure across the entire surface for 30–60 seconds. Allow the adhesive to cure for a minimum of 24 hours before subjecting the trim to heavy use or cleaning. ⚠ Note: Do not attempt to reposition the trim once the adhesive has made full contact with the surface. If adjustment is needed, act immediately before the bond sets. Avoid using harsh chemical cleaners directly on the trim surface, as these may affect the finish over time. Complete Your Discovery Sport Interior Browse our full range of Land Rover Discovery Sport interior accessories — each piece selected and tested to meet the standards Discovery Sport owners expect. Shop Discovery Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim Silver ABS Rear Tail Light Lamp Frame Trim Cover for Land Rover Discovery Sport 2015–2019 A precision-finished set of silver ABS tail light surrounds that instantly sharpens the rear exterior of your Discovery Sport with a cleaner, more purposeful look — no modification required. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Exterior Trim Tail Light Frame Adhesive Fit Set of 4 Overview The Land Rover Discovery Sport L550 occupies a unique position in the modern SUV landscape — capable enough to carry the Discovery name, refined enough to rival the premium compact class. Owners who choose a Discovery Sport tend to care about every detail, and the rear of the vehicle is no exception. The factory tail light area, while functional, is an opportunity for a subtle but meaningful visual upgrade. These silver ABS rear tail light lamp frame trim covers are designed specifically for the 2015–2019 Discovery Sport facelift range. They sit flush around the outer perimeter of the rear light clusters, introducing a bright, chrome-adjacent silver accent that adds definition, depth, and a more premium character to the rear fascia. The result is a look that feels factory-deliberate rather than aftermarket-obvious. Manufactured from high-grade ABS plastic with a durable silver surface finish, these covers are built to withstand the demands of daily driving — UV exposure, temperature cycling, and road wash alike. Installation is adhesive-backed and tool-free, making this one of the most rewarding exterior upgrades available for the Discovery Sport in terms of visual return versus effort. What's Included 🔲 Tail Light Frame Covers × 4 Full set — both left and right rear light clusters covered 🔧 Pre-Applied Adhesive Tape 3M-style double-sided tape pre-fitted to each cover 📋 Installation Guide Step-by-step instructions included in packaging Product Highlights Designed specifically for the 2015–2019 Discovery Sport L550 — precision fitment, no guesswork High-grade ABS plastic construction — lightweight yet impact-resistant Silver surface finish — bright, consistent tone that complements both light and dark body colours Pre-applied double-sided adhesive — no drilling, no tools, no risk of panel damage Complete set of 4 pieces — both tail light clusters fully covered in one purchase UV-stabilised material — resists fading, yellowing, and surface degradation over time Low-profile design — sits flush and clean without protruding or obscuring the light function Weather-sealed adhesive — maintains bond through rain, heat, and cold cycling Reversible installation — can be removed cleanly without marking factory paintwork Visual upgrade with minimal effort — one of the highest-impact exterior trim additions available for the Discovery Sport Compatibility Vehicle Model Code Year Range Fitment Land Rover Discovery Sport L550 2015 – 2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2019 – 2024 Verify Before Ordering Land Rover Discovery 5 L462 2017 – 2024 Not Compatible Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Range Rover Evoque L538 2011 – 2018 Not Compatible Installation Notes 🛠 Difficulty: Beginner  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the rear tail light surround area using an IPA (isopropyl alcohol) prep wipe or similar degreaser. Allow to dry completely — any wax, oil, or moisture will compromise adhesion. Dry-fit each cover piece against the tail light frame to confirm alignment and position before committing. Take note of any subtle differences between left and right pieces. Peel back a small section of the adhesive liner — do not remove entirely at this stage. Align the cover carefully from one edge, using the light cluster housing as your guide. Once satisfied with alignment, progressively remove the adhesive liner whilst pressing the cover firmly into place, working from the centre outward to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds per piece. Pay particular attention to corners and edges where the adhesive contact area is smallest. Allow the adhesive bond to cure for a minimum of 24 hours before driving through rain or a car wash. Ambient temperature above 15°C during installation will improve initial bond strength. ⚠ Note: These covers are an exterior cosmetic accessory. Ensure all pieces are fully seated before final pressure is applied — repositioning after full adhesive contact may reduce bond quality. If your vehicle has been resprayed, test adhesive compatibility on an inconspicuous area first. Complete Your Discovery Sport Browse the full Victorious Automotive range of Discovery Sport accessories — from interior trim upgrades to exterior styling additions, built for owners who hold their vehicles to a higher standard. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of product fitment identification.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Silver ABS Roof Reading Lamp Cover Trim for Land Rover Discovery 5 LR5 HSE Luxury 2017–2020 A precise-fit silver ABS trim surround that elevates the roof reading lamp area of your Discovery 5 cabin with a clean, polished finish — no tools, no fuss. Discovery 5 · LR5 2017–2020 Silver Finish ABS Plastic Roof Reading Lamp Tool-Free Install HSE Luxury Interior Trim Overview The Land Rover Discovery 5 — whether in standard specification or HSE Luxury trim — arrives from the factory with a refined interior that rewards attention to detail. For owners who take pride in the smaller touches, the roof reading lamp surround is one of those overlooked areas where the standard plastic finish can appear flat and underwhelming against an otherwise premium cabin environment. This silver ABS roof reading lamp cover trim is engineered as a direct overlay for the existing lamp surround on 2017–2020 Discovery 5 and LR5 models. Crafted from high-quality ABS plastic with a bright silver finish, it introduces a polished, contemporary accent to the headliner area — complementing chrome interior detailing and light-coloured cabin trims particularly well. Installation requires no drilling, no wiring, and no specialist tools. The trim uses pre-applied double-sided adhesive tape to bond cleanly to the OEM surround, making this an ideal Saturday-morning upgrade that delivers a noticeably more composed interior aesthetic with minimal effort. What's Included 💡 Roof Reading Lamp Cover Trim 1× silver ABS surround trim piece 🔧 Pre-Applied Adhesive Double-sided tape backing included 📄 Installation Guide Basic fitting reference included Product Highlights Precision-moulded ABS plastic for an accurate fit over the OEM lamp surround Bright silver finish for a polished, premium interior accent Pre-applied double-sided adhesive — no tools or drilling required 100% brand new, never fitted — supplied in protective packaging Specifically designed for Discovery 5 / LR5 2017–2020 roof lamp area Lightweight construction — adds no perceptible weight to the headliner Compatible with HSE, HSE Luxury, and comparable trim levels Durable ABS material resists warping, heat, and UV discolouration Clean, seamless overlap with no visible gaps when correctly fitted Reversible installation — can be removed without damaging OEM trim Compatibility Vehicle Model Code Year Range Trim Level Fit Land Rover Discovery 5 LR5 / L462 2017–2020 S, SE, HSE, HSE Luxury Direct Fit Land Rover Discovery 5 LR5 / L462 2021–2024 All Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 All Not Compatible Land Rover Discovery 3 L319 2004–2009 All Not Compatible Range Rover Sport L494 L494 2013–2020 All Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 Minutes  ·  Tools Required: None Begin with the vehicle switched off. Ensure the headliner and existing lamp surround are clean, dry, and free from dust, grease, or conditioning products. Use an isopropyl alcohol wipe (not supplied) to thoroughly degrease the surface of the OEM lamp surround where the trim will adhere — this is critical for a lasting bond. Dry-fit the silver trim piece over the existing surround without removing the adhesive backing, confirming alignment and verifying the fit before committing. Once satisfied with the position, carefully peel the adhesive backing from the trim piece, align it precisely, and press firmly into place from the centre outward. Apply sustained hand pressure across the full surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before exposing to heavy vibration or direct sunlight through the glass. ⚠ Note: Ensure the cabin temperature is above 15°C during installation. Cold conditions can reduce initial adhesive tack. Do not attempt installation immediately after using interior detailing sprays or fabric protectors on the headliner area. Complete Your Discovery 5 Interior Browse our full range of Land Rover Discovery 5 interior trim upgrades — designed by enthusiasts, for owners who won't settle for stock. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious Automotive · Land Rover Discovery Sport · Exterior Trim Silver ABS Side Air Vent Fender Trim — Land Rover Discovery Sport 2015–2019 A precision-matched fender vent trim that adds a purposeful, performance-inspired aesthetic to the Discovery Sport's front quarter panels — no cutting, no drilling, no compromise. Discovery Sport L550 2015–2019 ABS Plastic Silver Finish Exterior Trim Side Air Vent Fender Accent Pair Included Overview The Land Rover Discovery Sport — introduced in 2015 as the spiritual successor to the Freelander — is a vehicle that straddles the line between family-friendly practicality and genuine off-road capability. It's a machine that rewards personalisation, and owners who know their car well are always looking for ways to sharpen its road presence without straying from the original design language. This Silver ABS Side Air Vent Fender Trim is designed specifically for the Discovery Sport produced between 2015 and 2019. Moulded from high-quality ABS plastic and finished in a clean silver tone, the trim attaches to the front fender area to simulate functional side vents — a design cue borrowed from performance and sporting derivatives across the Land Rover range. The result is a more assertive, athletic stance that looks factory-fitted rather than aftermarket. Available in silver, red, and yellow, this trim gives Discovery Sport owners a simple and reversible way to refresh the exterior without committing to a full body kit or expensive respray. The adhesive-backed fitment process is straightforward and tool-free, making this an ideal weekend upgrade for any enthusiast who wants a meaningful visual result in under an hour. What's Included 🔲 Side Air Vent Fender Trims × 2 Left and right matched pair, silver ABS finish 🔧 Pre-Applied Adhesive Tape 3M-grade backing for a secure, clean bond 📋 Fitment Guide Step-by-step installation reference included Product Highlights Precision-moulded ABS plastic with consistent wall thickness throughout Silver finish replicates the look of factory exterior chrome and satin accents Supplied as a matched left and right pair for balanced fitment Pre-applied adhesive backing ensures clean, rattle-free installation No drilling, cutting, or modification to the vehicle bodywork required Reversible upgrade — removable without damaging original paintwork UV-resistant ABS construction resists fading in direct sunlight Available in multiple colour options: Silver, Red, and Yellow Compatible with all trim levels of the Discovery Sport 2015–2019 Adds a performance-oriented, sporty aesthetic to the front quarter panels Compatibility Vehicle Code Years Fitment Land Rover Discovery Sport L550 2015–2019 Direct Fit Land Rover Discovery Sport L550 Facelift 2020–2024 Verify Before Purchase Land Rover Discovery 5 L462 2017–2024 Not Compatible Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2019–2024 Not Compatible Installation Notes 🛠 Difficulty: Beginner — Estimated Time: 20–30 Minutes Thoroughly clean the target area on both front fenders using an IPA (isopropyl alcohol) wipe to remove all wax, grease, and dirt. Allow to dry completely before proceeding. Dry-fit both trim pieces against the fender to confirm positioning and ensure you are satisfied with the placement and symmetry before committing to adhesion. Peel back the adhesive liner from the rear of the trim piece, exposing the bonding tape. Take care not to touch the adhesive surface. Align the trim carefully to your desired position on the fender vent area. Press firmly and evenly across the entire surface for 30–60 seconds to activate the adhesive bond. Repeat the process for the opposing side, ensuring symmetry between left and right trims. Allow a minimum of 24 hours before washing the vehicle or exposing the area to water. This allows the adhesive to cure fully and achieve maximum bond strength. ⚠ Note: Fitment quality is heavily dependent on surface preparation. Do not attempt installation in cold temperatures below 10°C, as adhesive performance may be significantly reduced. If in any doubt, contact our team before installation — we're happy to help. Upgrade Your Discovery Sport Today Browse our full range of Land Rover Discovery Sport accessories — from exterior styling to interior enhancements — all curated specifically for your vehicle. Shop Discovery Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for identification and compatibility purposes only and remain the property of their respective owners.

Victorious Automotive · Land Rover Discovery 5 · Interior Trim Silver ABS Tailgate Door Switch Frame Cover Trim for Land Rover Discovery 5 LR5 L462 (2017–2023) A precision-cut, silver ABS tailgate switch surround that instantly refines the rear interior of your Discovery 5 — no drilling, no fuss, just a cleaner finish where it matters. Discovery 5 L462 2017–2023 Silver Finish ABS Plastic Tailgate Switch Trim Adhesive Fit Interior Upgrade Brand New Overview The Land Rover Discovery 5 (L462) is a vehicle built around capability and comfort, and owners who invest in this platform tend to care just as much about the details inside as the terrain outside. From the second row back to the tailgate, every surface is noticed — and the rear door switch area is one of those small zones that, when left in its factory-plain state, can feel like a missed opportunity in an otherwise well-appointed interior. This tailgate door switch frame cover trim slots precisely over the existing switch housing at the rear of your Discovery 5's interior, covering the surrounding panel with a clean silver ABS finish. The result is a more cohesive, considered look that aligns with the premium character of the cabin without any invasive modification. Whether you're building out a full interior refresh or simply addressing one overlooked detail, this piece delivers a noticeable step up in interior quality. Made from high-grade ABS plastic with a durable silver coating, this trim is engineered for long-term adhesion and resistance to the temperature fluctuations and contact wear that come with real-world use. Installation is entirely tool-free — the trim mounts via pre-applied double-sided adhesive, meaning a confident, permanent bond that takes minutes to achieve and looks factory-fitted from day one. What's Included 🔲 Tailgate Switch Frame Cover 1× silver ABS trim piece, pre-cut for Discovery 5 L462 🔧 Double-Sided Adhesive Pre-applied tape backing for tool-free installation Product Highlights Precision-cut specifically for the Discovery 5 (L462) tailgate switch area High-grade ABS plastic construction for durability and rigidity Silver finish complements chrome and brushed aluminium interior accents Tool-free installation via pre-applied double-sided adhesive tape Protects the underlying switch surround from scratches and wear No drilling, cutting, or permanent modification required Colour-stable finish resistant to UV fading and interior heat cycles Slim-profile design that sits flush and looks factory-installed 100% brand new — not refurbished or reconditioned Also available in black wood grain and carbon fibre finishes Compatibility Vehicle Code Year Range Fit Land Rover Discovery 5 L462 (LR5) 2017 – 2023 Direct Fit Land Rover Discovery 4 L319 2009 – 2016 Not Compatible Land Rover Discovery 3 L319 2004 – 2009 Not Compatible Range Rover Sport L461 / L494 All Years Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Land Rover Discovery Sport L550 All Years Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 5–10 minutes  ·  Tools Required: None Open your Discovery 5's tailgate fully to gain clear access to the interior switch panel area. Clean the switch surround surface thoroughly using an alcohol wipe or isopropyl alcohol pad, removing any grease, dust, or residue. Allow to dry completely before proceeding. Test-fit the trim piece dry (without removing the adhesive backing) to confirm alignment and orientation. The trim should sit flush with no gaps. Peel the protective backing from the double-sided adhesive tape on the reverse of the trim. Align the trim carefully over the switch surround and press firmly and evenly across the entire surface for 30–60 seconds to ensure a secure bond. Allow the adhesive to cure for at least 1–2 hours before handling the trim or closing the tailgate repeatedly. ⚠ Note: Ensure the mounting surface is completely clean and dry before applying. Installing in cold temperatures (below 10°C) may reduce initial adhesive strength — allow the vehicle interior to warm before fitting if possible. Contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) if you have any fitment questions before installation. Complete Your Discovery 5 Interior This tailgate switch trim is just the start. Browse our full range of Discovery 5 interior accessories — from door handle surrounds to dashboard trim panels — all curated for the LR5 L462 platform. Shop Discovery 5 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover, Range Rover, and Defender vehicles. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

BMW · 5 Series G30 · Interior Trim Silver Air Conditioning Vent Trim for BMW 5 Series G30 (2018–2019) Elevate your cabin aesthetics with premium matt silver AC vent trim engineered for seamless fit and lasting durability. G30 2018–2019 ABS Plastic Matt Silver Direct Fit Overview The BMW 5 Series G30 (2018–2019) demands interior accessories that match its refined engineering and premium aesthetic. This Silver AC Vent Trim is precisely engineered to integrate seamlessly with your cabin's climate control surround, replacing OEM trim with a more sophisticated matt silver finish that catches light without gloss distraction. Machined from high-grade ABS plastic and ISO9001-certified for durability, this trim piece resists UV degradation, thermal stress, and the micro-abrasion that comes from years of cabin climate changes. The matt silver colorway complements both light and dark interiors, working with everything from tan leather to carbon fiber accents. Installation is straightforward—no drilling, no modifications to your dashboard. This is the kind of detail upgrade that separates carefully maintained examples from the rest: visible proof that you care about your interior as much as your performance specs. What's Included 🎨 AC Vent Trim Surround Matt silver ABS plastic, precisely fitted ✓ Pre-Tested Fit Quality-assured and ready to install Product Highlights Precisely engineered for BMW 5 Series G30 (2017–2019) compatibility Premium matt silver finish for sophisticated cabin upgrade High-grade ABS plastic ensures durability and thermal stability ISO9001-certified manufacturing standards Lightweight design at just 50g—no impact on weight distribution Direct fit—no modifications or drilling required Resistant to UV fading and temperature cycling Complements both light and dark interior color schemes Easy installation integrates with existing interior components Ideal companion to other G30 interior refinements Compatibility Model Generation Year Range Status BMW 5 Series G30 2017–2019 Direct Fit BMW 5 Series G30 LCI 2020+ Not Compatible BMW 5 Series F10/F11 2010–2017 Not Compatible Please verify your vehicle's model year and generation before ordering. Fitment is guaranteed only for 2017–2019 G30 models without aftermarket dashboard modifications. Installation Notes Difficulty Level: Easy | Time: 10–15 minutes Power off the vehicle and allow the cabin to cool to room temperature. Locate the AC vent surround trim on your dashboard center stack. Using a soft plastic trim removal tool, gently pry the existing trim away from its mounting points. Work methodically to avoid cracking. Disconnect any integrated switches or controls if present on your trim variant. Clean the mounting surface with a microfiber cloth and isopropyl alcohol. Allow to dry completely. Align the new Silver AC Vent Trim with the mounting points and press firmly until all clips engage. Reconnect any integrated controls and verify that the trim sits flush with the surrounding dashboard. Start the vehicle and test climate control function to confirm proper reassembly. Note: If your trim includes integrated controls, photograph connector positions before removal. Forcing connections can damage control modules. Ready to Refine Your G30? Small details define ownership. This Silver AC Vent Trim is the kind of upgrade that reminds you—every time you adjust climate control—that you drive a car worth caring for. Add to Cart Apply code at checkout: 22GET20 20% off any 2 items 4.9/5 — 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide shipping (DHL, FedEx, UPS, TNT) ✓ Expert support: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to BMW AG, Bayerische Motoren Werke AG, or any subsidiary thereof. All trademarks, logos, and brand names are the property of their respective owners. This product is designed for compatibility with the specified vehicle model only.

Victorious Automotive · Defender L663 · Interior Trim Silver Aluminum Alloy Air Conditioning & Audio Control Knobs Trim — Land Rover Defender 110 (2020) A precision-machined aluminium upgrade that replaces the factory plastic knobs with a refined, tactile finish that suits the Defender's rugged-yet-premium character. Defender L663 2020 Model Year Aluminum Alloy Silver Finish AC Knobs Audio Control Trim Direct Fit No Drilling Required Overview The 2020 Land Rover Defender 110 (L663) marked a watershed moment for the nameplate — a thoroughly modern reinterpretation of an icon, built around a premium interior that blends utilitarian durability with genuine luxury. The centre console and climate control panel occupy a commanding position in the cabin, and the quality of every surface you touch directly shapes how the space feels on long drives and off-road adventures alike. These Silver Aluminum Alloy Air Conditioning and Audio Control Knobs Trim pieces are engineered as a direct-fit replacement for the 2020 Defender 110. Machined from high-grade aluminium alloy and finished in a clean, brushed silver, they bring a noticeably more substantial, purposeful feel to the controls you interact with every time you adjust your climate or audio settings. Where the factory plastic can feel at odds with the rest of the cabin's premium ambition, these knobs close that gap with minimal effort. Installation requires no cutting, drilling, or specialist tools — the trim is designed to locate precisely onto the existing control stalks and secure without modification. For Defender owners who appreciate their vehicle and want every detail to reflect that, this is one of the most satisfying interior upgrades available for the money. What's Included 🔩 AC Control Knobs Trim Full set, silver aluminium alloy finish 🎚️ Audio Circle Trim Rings Matching finish for audio control interface 📦 Protective Packaging Securely packed to prevent transit damage 📋 Fitment Guide Basic installation reference included Product Highlights Precision-machined from high-grade aluminium alloy for lasting durability Brushed silver finish complements the Defender 110's premium interior palette Direct-fit design engineered specifically for the 2020 Defender L663 Replaces factory plastic with a noticeably more premium, tactile feel No drilling, cutting, or permanent modifications required Resistant to wear, heat, and UV fading from daily use Lightweight aluminium construction — adds no meaningful weight to controls Manufactured to international quality standards for consistent finish Fully covers existing control bases for a clean, factory-integrated look 100% brand new — not refurbished or remanufactured Compatibility Vehicle Model Code Year Range Fitment Land Rover Defender 110 L663 2020 Direct Fit Land Rover Defender 90 L663 2020 Verify Before Purchase Land Rover Defender 130 L663 2022–2026 Verify Before Purchase Range Rover Sport L494 L494 2013–2020 Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠️ Difficulty: Easy  |  ⏱️ Estimated Time: 15–30 Minutes  |  🔧 Tools Required: None Ensure your Defender 110 is switched off and the interior is at ambient temperature before beginning. Carefully examine the existing factory plastic knobs on your AC and audio control panel to familiarise yourself with their position and orientation. Gently grip the factory knob and pull firmly but evenly away from the panel to release it from the control shaft. Do not twist — pull straight out. Align the new aluminium alloy knob trim with the corresponding shaft, ensuring correct orientation for any directional markers. Press the new knob firmly and evenly onto the shaft until it seats securely and sits flush against the panel surface. Repeat for all remaining knobs in the set, then test each control for smooth, full-range operation before completing. ⚠; Please Note: This product is listed as a confirmed direct fit for the 2020 Land Rover Defender 110 (L663). If you own a Defender 90, Defender 130, or a different model year, please verify compatibility with our team before purchasing. Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment for your specific vehicle. Complete Your Defender Interior These knobs are just the start. Explore our full range of Defender L663 interior upgrades — from gear selector surrounds to dashboard trim — all designed to the same standard of fit and finish. Shop Defender 110 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 Expert support Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. Vehicle model names, codes, and trademarks are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle before installation.

Victorious · Mercedes GLC · Grilles Silver AMG-Style Racing Mesh Front Grille – GLC X253 Transform your Mercedes GLC into an aggressive, high-performance machine with authentic AMG GT R–inspired design. X253 GLC 2017+ ABS Material AMG Design Direct Fit Overview If you own a 2017+ Mercedes-AMG GLC X253 Sport, you already know the appeal of aggressive styling paired with refined engineering. This racing mesh grille takes that philosophy further, giving your GLC the iconic front-end presence of the AMG GT R—without compromise on fitment or quality. Precision-engineered in durable ABS plastic with a sophisticated silver-and-black finish, this grille slots seamlessly into your existing bodywork. It's not just a visual upgrade; the mesh design enhances the sense of performance, making your GLC look faster standing still. Installation is straightforward—it's a direct replacement requiring no drilling or cutting. Whether you're upgrading from OEM or refreshing an aging grille, this part delivers show-stopping presence and functional durability. CE-approved and tested for finish longevity. What's Included 🎯 1 × Racing Mesh Grille Silver/black AMG-style design, X253-specific fit ⚡ Hardware & Clips Pre-fitted for direct bolt-on installation 📋 Fitment Guide Step-by-step installation notes included ✓ 30-Day Guarantee Victorious money-back promise on all parts Product Highlights AMG GT R–inspired aggressive mesh pattern for bold, premium presence High-grade ABS construction—impact resistant, UV-stable, long-lasting finish Sophisticated silver/matte-black two-tone colour scheme Engineered for perfect fitment with 2017+ GLC X253 Sport models Direct replacement—no drilling, cutting, or chassis modification required CE-approved and durability-tested for demanding climates Lightweight design reduces unsprung mass vs. aftermarket steel alternatives Retains OEM star badge from your original grille Enhanced aerodynamic silhouette complements GLC Coupe and standard body styles Professional appearance rivals OEM AMG-specification parts at a fraction of the cost Compatibility Model Year Compatibility Mercedes-AMG GLC 43 X253 2017–2023 Direct Fit GLC Coupe X253 4MATIC 2017–2023 Direct Fit GLC 300 Sport X253 2017–2023 Direct Fit GLC 250 X253 2017–2023 Direct Fit GLC63 AMG X253 2017–2023 Not Compatible GLC (pre-2017) 2015–2016 Not Compatible Note: Grille does not include the Mercedes star badge. Transfer your badge from the original grille during installation. GLC63 models require a different grille specification and are not compatible with this part. Installation Notes Difficulty Level: Beginner–Intermediate | Time: 15–25 minutes Prepare your vehicle. Park on level ground, engage the handbrake, and ensure the engine is cool. Open the bonnet and locate the grille clips. Remove the OEM grille. Carefully unclip the original grille by pressing the top clips inward and gently pulling the grille toward you. Transfer the star badge to the new grille if desired. Install the racing grille. Align the new grille with the mounting points and press firmly until all clips engage with an audible click. Check alignment. Step back and visually confirm the grille sits flush with the bonnet edge and bumper body lines. Secure the badge. If transferring your OEM badge, snap it into the centre mounting point on the new grille. Final inspection. Gently test the grille stability from side to side—it should not flex or rattle. Customs Notice: Customs duties and import taxes are the responsibility of the customer. Please check your local import regulations before purchase. Victorious ships worldwide via DHL, FedEx, UPS, and TNT. Ready to Elevate Your GLC? Join over 12,300 verified customers who trust Victorious for premium automotive styling. This grille delivers the aggressive AMG aesthetic your GLC deserves—backed by our 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars – 12,300+ Reviews 🌍 Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ 30-Day Guarantee – Money-Back Promise 📞 Expert Support – +44 203 943 9919 Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Mercedes-Benz AG, Mercedes-AMG, or Daimler. All product names, logos, and brands mentioned are the property of their respective owners. This product is an independent aftermarket accessory designed for fitment compatibility only.

Victorious Automotive · Range Rover Velar · Exterior Styling Silver & Black Hood Vent Slats for Range Rover Velar 2017–2019 Transform your Velar's bonnet with precision-finished two-tone vent slat trims that deliver the Dynamic Edition look — no drilling, no fuss, no compromise. Range Rover Velar 2017–2019 Silver & Black Bonnet Vent Trims Peel & Stick Exterior Styling High-Grade ABS No Drilling Required Overview The Range Rover Velar arrived with one of the most architecturally considered silhouettes in the modern SUV era — flush surfaces, flush door handles, and a bonnet line that draws the eye from front to rear. The hood vent apertures are a defining detail of that design, and yet in standard trim, they remain understated. These Silver and Black Hood Vent Slat Trims are designed specifically for Velar owners who want to unlock the full visual intent of that feature. Finished in a polished silver and gloss black two-tone combination, these vent slat inserts slot cleanly into the existing bonnet vent cutouts and replicate the appearance of the Velar's premium Dynamic specification. The contrast between the silver slats and black surround picks out the geometry of the vent with precision, adding visual depth and a purposeful, performance-orientated character without altering the vehicle's original lines. Manufactured from high-grade ABS polymer with a mirror-quality surface finish, these trims are built to resist UV fading, temperature cycling, and the general rigours of daily driving. Installation requires no tools, no adhesive mixing, and no professional fitting — just a clean surface, a few minutes, and the confidence that the result will look factory-correct from day one. What's Included 🔲 Hood Vent Slat Trims (x2) Left and right silver & black inserts for both bonnet vents 📎 Pre-Applied 3M Adhesive Tape High-bond automotive-grade backing, factory-applied to each trim 🧹 Surface Prep Wipe Alcohol cleaning wipe to ensure a clean bond prior to fitting 📄 Fitting Instructions Step-by-step guide included in the box Product Highlights Designed specifically for the Range Rover Velar 2017–2019 bonnet vent apertures Two-tone silver and gloss black finish for a Dynamic Edition aesthetic High-grade ABS construction — resistant to UV, heat, and road vibration Pre-applied 3M automotive adhesive — no separate bonding agents required Tool-free installation completable in under 15 minutes Precision-cut for flush, factory-correct fitment — no gaps or proud edges Does not interfere with bonnet vent function or airflow Non-permanent — fully removable without damage to paintwork Available in three colourways: Silver/Black, Rose Gold, and Full Black Supplied as a complete pair — fits both left and right vents simultaneously Compatibility Vehicle Year Range Trim Level Fit Range Rover Velar (L560) 2017 – 2019 All trims — S, SE, HSE, R-Dynamic Direct Fit Range Rover Velar (L560) 2020 – 2022 All trims Verify Before Purchase Range Rover Evoque (L551) 2019 – 2024 All trims Not Compatible Range Rover Sport (L494) 2013 – 2022 All trims Not Compatible Range Rover Vogue (L405) 2013 – 2021 All trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 10–15 minutes  ·  Tools Required: None Park the vehicle and allow the bonnet to cool fully to ambient temperature before beginning installation. Use the included alcohol prep wipe to thoroughly clean the surface of each bonnet vent aperture. Remove all wax, polish residue, and road film. Allow to dry completely — approximately 60 seconds. Test-fit each vent slat trim against its corresponding aperture without removing the adhesive backing. Confirm alignment and orientation before committing. Peel the protective film from the 3M adhesive backing on the first trim. Position carefully within the vent aperture, starting from the centre and working outward. Apply firm, even pressure across the full length of the trim for a minimum of 30 seconds to activate the adhesive bond. Repeat for the second vent slat trim on the opposite side. Allow 24 hours before washing the vehicle or exposing the bonnet to heavy rain, to allow the adhesive to reach full cure strength. ⚠ Note: Do not attempt installation in direct sunlight or when ambient temperature is below 10°C, as this will reduce adhesive performance. For best results, install indoors or in a shaded area with a surface temperature between 15°C and 35°C. Complete the Look on Your Velar Explore the full Victorious range of exterior styling accessories for the Range Rover Velar — from mirror caps and grille surrounds to side vents and door trims. Everything you need to finish the build, in one place. Shop All Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes. All rights remain with their respective owners.

Victorious Automotive · Range Rover Sport L494 · Front Grille Silver & Black Front Upper Grille Upgrade — Range Rover Sport 2018–2022 A precision-fit ABS front grille replacement that instantly refreshes the face of your Range Rover Sport with a bold two-tone silver and black finish — no cutting, no specialist tools required. L494 · 2018–2022 Direct Fit ABS Plastic Silver & Black Upper Grille Exterior Styling Improved Airflow No Cutting Required Overview The Range Rover Sport L494, in its 2018–2022 facelift guise, already commands attention — but for owners who want to sharpen the front fascia and give their Sport a more distinctive, contemporary character, the factory grille often feels like an opportunity left on the table. This is where considered exterior upgrades make a genuine difference. This front upper radiator grille is engineered from high-quality ABS plastic and finished in a striking silver and black two-tone arrangement — echoing the design language of later Sport derivatives and giving the face of the vehicle a fresher, more aggressive presence. The silver surround provides visual contrast against the darker mesh, lifting the overall appearance without resorting to anything excessive or off-brand for the vehicle's premium character. Beyond aesthetics, the open-mesh design aids airflow to the radiator, contributing to more efficient heat management under the bonnet. Each unit passes strict quality control checks before leaving the factory, and the direct-fit design means installation is a clean swap — no modification to your existing bodywork required. What's Included 🔲 Front Upper Grille ABS construction, silver & black two-tone finish 🔩 Mounting Hardware Clips and fixings for secure fitment 📄 Fitment Reference Basic installation guide included Note: Land Rover badge / emblem is not included. Your existing badge can be transferred from the original grille. Product Highlights Direct OEM-position replacement — no cutting or modification required High-quality ABS plastic construction for durability and weather resistance Two-tone silver and black finish for a premium, contemporary appearance Open-mesh design promotes improved airflow to the engine radiator Strict factory QC testing on every unit prior to dispatch Designed specifically for the 2018–2022 Range Rover Sport L494 facelift Lightweight construction — no impact on vehicle performance or handling Existing Land Rover badge transfers directly from original grille Enhances kerb appeal and distinguishes your Sport from standard specification Straightforward home installation — suitable for confident DIY fitment Compatibility Vehicle Code Year Range Fitment Range Rover Sport Facelift L494 2018 – 2022 Direct Fit Range Rover Sport Pre-Facelift L494 2013 – 2017 Not Compatible Range Rover Sport L461 2022 – 2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible If you are unsure whether this grille suits your specific build year or trim level, please contact our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 30–60 minutes Ensure the vehicle is parked on a flat surface with the engine fully cool before beginning work. Open the bonnet and locate the retaining clips and fasteners securing the original upper grille to the front bumper assembly. Carefully unclip and remove the factory grille from the front of the vehicle, working from the outer edges inward to avoid stressing the plastic tabs. If transferring your Land Rover badge, gently remove it from the original grille using a trim tool or heat gun at low setting to soften the adhesive. Align the new silver and black grille into the grille aperture, ensuring all mounting tabs are correctly seated before pressing firmly to engage the clips. Reattach any fasteners removed during disassembly and refit the badge to the new grille using the original adhesive or fresh double-sided tape. Visually inspect the fitment from the front of the vehicle to confirm even gaps on both sides before closing the bonnet. ⚠ Please Note: Always confirm your exact build year and specification before ordering. The 2018–2022 facelift L494 front bumper differs from the 2013–2017 pre-facelift. If in doubt, cross-reference your VIN or contact our team prior to purchase. Upgrade Your Range Rover Sport Today Explore our full collection of Range Rover Sport L494 exterior accessories — designed and curated specifically for discerning Sport owners who want more from their vehicle. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Sport L494 · Interior Trim Silver & Gold Crystal Door Speaker Cover Trim — Range Rover Sport L494 2014–2015 Transform your Sport's interior door panels with precision-fit crystal-embellished speaker cover trims, available in polished silver and gold finishes for an elevated cabin presence. Range Rover Sport L494 2014–2015 Chrome Base Crystal Accents Silver & Gold Adhesive Fit Interior Trim No Drilling Required Overview The Range Rover Sport L494 arrived with one of the most driver-focused interiors Land Rover had produced — a cockpit-style cabin defined by its layered trim surfaces, sculpted door cards, and carefully considered detailing. For owners of the 2014 and 2015 model years, the speaker grilles integrated into the door panels represent one of the most visible interior touchpoints, and one that responds exceptionally well to considered upgrades. These door speaker cover trims are designed as a direct-fit enhancement for the L494 Sport, featuring a chrome base adorned with hand-placed crystal embellishments that catch and reflect light with every journey. Available in two distinct finish options — refined silver and warm gold — they allow owners to complement the existing interior palette, whether that's the cooler, contemporary feel of an Ebony or Ivory cabin or the richer tones of a Tan or Espresso interior. Installation requires no tools, no drilling, and no modifications to your vehicle's door cards. Pre-applied adhesive tape seats each cover securely over the existing grille, delivering a factory-quality result in under two minutes. It's the kind of detail that quietly elevates the whole cabin without announcing itself — precisely the approach Range Rover interiors reward. What's Included 🔷 Door Speaker Cover Trims × 2 One pair — fits both front door speaker grilles 🩹 Pre-Applied Adhesive Tape Industrial-grade 3M-style tape pre-fitted to each cover 📄 Installation Guide Step-by-step fitting instructions included Product Highlights Precision-fit design engineered for the L494 Range Rover Sport door panels Crystal embellishments add a jewellery-grade detail to the interior Available in polished silver and warm gold chrome finishes Chrome base construction for a durable, premium surface quality Pre-applied adhesive tape for a clean, tool-free installation No drilling, cutting, or door card removal required Installs in under two minutes per cover Reversible fitment — removes cleanly without residue damage Compatible with both left and right-hand drive Sport variants Complements factory interior colour palettes across all 2014–2015 trim grades Compatibility Vehicle Code Year Range Fit Range Rover Sport L494 2014–2015 Direct Fit Range Rover Sport L494 2013 Verify Before Purchase Range Rover Sport L494 2016–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Estimated Time: Under 2 Minutes  |  🔧 Difficulty: Very Easy  |  🛠 Tools Required: None Ensure the door panel surface around the speaker grille is clean, dry, and free from dust, oils, or wax residue. A quick wipe with isopropyl alcohol ensures maximum adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse of each speaker cover trim. Align the trim over the existing speaker grille, taking care to centre the cover accurately before making contact with the panel surface. Press firmly and evenly around the perimeter of the trim for 20–30 seconds to activate the adhesive bond. Repeat for the second door. Allow 30–60 minutes before exposing to moisture or temperature extremes for a full cure. ⚠ Note: Please confirm your exact vehicle model year before purchasing. Door panel grille profiles may vary between early and late L494 production runs. If you are unsure of compatibility, contact our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Complete the Detail These speaker trims are one part of a wider interior upgrade story for the L494 Sport. Explore our full Range Rover Sport L494 collection for complementary trim pieces, gear selector surrounds, and dashboard accents — all designed to work together. Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover L405 / L494 · Interior Trim Silver & Gold Door Window Switch Frame Trim for Range Rover Vogue L405 & Range Rover Sport L494 (2013–2021) Crystal-embellished door switch frame trims that bring Swarovski-style sparkle and bespoke character to your Range Rover's interior in under two minutes. Range Rover Vogue L405 Range Rover Sport L494 2013–2021 Silver & Gold Swarovski-Style Crystals Chrome Accents 4-Piece Set No-Tool Fit Interior Upgrade Overview The Range Rover Vogue L405 and Range Rover Sport L494 represent two of the most respected luxury SUVs ever produced — cabins defined by clean lines, premium materials, and a sense of composed sophistication. For owners who want to take that interior aesthetic one step further, the door window switch surrounds are a subtle but immediately visible canvas for personalisation. These door window switch frame trims are precision-cut to sit flush over the existing switch panels on all four doors, replacing the factory-finish surround with a statement piece finished in your choice of Silver or Gold. Each trim is studded with Swarovski-style crystals and framed with chrome detailing — delivering a diamond-cut sparkle that catches the light beautifully without overwhelming the cabin's original character. The appeal here is in the detail. Whether you're stepping into your Vogue after a long day or chauffeuring guests in your Sport, these trims communicate care and individuality. They fit using pre-applied adhesive backing, meaning installation requires no tools, no drilling, and no specialist knowledge — just a clean surface and two minutes of your time. What's Included 💎 Front Left Door Trim Crystal & chrome switch frame surround 💎 Front Right Door Trim Crystal & chrome switch frame surround 💎 Rear Left Door Trim Crystal & chrome switch frame surround 💎 Rear Right Door Trim Crystal & chrome switch frame surround 🔧 Pre-Applied Adhesive 3M-style backing — no tools required 📋 Fitting Instructions Step-by-step guide included in packaging Product Highlights Precision-cut to match L405 Vogue and L494 Sport door switch panel geometry exactly Available in Silver and Gold finishes to complement both light and dark interior colourways Swarovski-style crystal embellishments for genuine luxury sparkle Chrome and diamond-cut detailing frames each trim for added visual depth Pre-applied adhesive backing means zero tools and zero damage to factory panels Full four-door coverage in a single set — front and rear doors included Slim profile sits flush to the door card surface without any unsightly gaps Durable construction resists daily contact, UV light, and interior temperature fluctuations Reversible upgrade — trims can be removed without leaving residue on factory panels Installation takes under two minutes per door — complete the full set in one go Compatibility Model Code Year Range Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Defender L663 2020–2026 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes ⏱ Difficulty: Easy  |  Estimated Time: 5–10 minutes (full set) Start with a clean, dry interior. Use an isopropyl alcohol wipe to degrease the existing door switch frame surround on each door — this ensures maximum adhesive bond. Unwrap each trim piece and identify which piece corresponds to each door (front left, front right, rear left, rear right). Test the fit dry before peeling the adhesive backing. Peel the protective film from the adhesive backing on the first trim piece. Align the trim carefully over the switch surround, starting from one edge and pressing down gradually to avoid air bubbles. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond fully. Repeat for all four doors. Allow 30 minutes for the adhesive to fully cure before operating the windows repeatedly. ⚠ Important: Please verify your vehicle's model code (L405 or L494) and model year before ordering. Switch panel geometry changed significantly with the 2022 model year refresh on both the Vogue (L460) and Sport (L461). This product is not compatible with 2022 and newer variants. Elevate Every Detail At Victorious Automotive, we believe the finest Range Rovers are defined by the details their owners choose. These door switch frame trims are a simple, reversible, and genuinely beautiful upgrade for any L405 or L494 interior. Shop Range Rover Vogue L405 Accessories Shop Range Rover Sport L494 Accessories Buying 2 or more items? Use code 22GET20 for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🚚 Worldwide shipping via DHL, FedEx & UPS 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle model names, codes, and references are used solely for fitment identification purposes. Swarovski® is a registered trademark of Swarovski AG; this product uses Swarovski-style crystals and is not affiliated with or endorsed by Swarovski AG.

Victorious Automotive · Range Rover Vogue & Sport · Interior Trim Silver & Gold Gear Shift Button Cover Trim for Range Rover Vogue & Sport (2014–2023) A precision-fit chrome and Swarovski-style diamond accent trim that transforms your gear selector area into a genuine focal point of your Range Rover's cabin — installed in under two minutes, no tools required. L405 Vogue L494 Sport 2014–2023 Chrome Finish Swarovski-Style Accents Silver & Gold Adhesive Fit Interior Trim Gear Shift Cover Overview The Range Rover Vogue L405 and Sport L494 occupy a class of their own — vehicles where interior quality is scrutinised as closely as on-road performance. From 2014 through to the 2023 model year, both platforms share a cabin language built around layered surfaces, contrast detailing, and restrained luxury. It's a space where even the smallest upgrade, placed correctly, can feel completely factory-intended. This Gear Shift Button Cover Trim is designed precisely for that philosophy. Finished in polished chrome with Swarovski-style crystal accents, it overlays your existing gear selector button surround and immediately elevates the visual weight of the centre console area. Available in both silver and gold finishes, it complements dark interior colourways and contrasts beautifully against lighter leathers — giving owners a genuine choice of character rather than a single forced aesthetic. The trim is constructed from high-grade chrome-plated material that resists fingerprints and maintains its lustre over time. Pre-applied adhesive tape on the reverse face means fitment is clean, repeatable, and completely reversible — no drilling, no cutting, no risk to your vehicle's original surfaces. For owners who want a more bespoke interior without committing to a full retrofit, this is one of the most impactful single-piece upgrades available. What's Included ⚙️ Gear Shift Button Cover Trim One-piece chrome unit with Swarovski-style accents — silver or gold finish as selected 🔧 Pre-Applied Adhesive Tape Factory-bonded to the reverse face — no separate adhesive preparation required 📄 Fitment Guide Step-by-step instructions for a clean, confident installation Product Highlights Precision-designed to fit the gear selector button surround of L405 Vogue and L494 Sport models from 2014–2023 Available in polished silver chrome and warm gold chrome — both complementary to OEM interior palettes Swarovski-style crystal diamond detailing adds tactile depth and genuine sparkle to the centre console High-grade chrome-plated construction resists tarnishing, smudging, and daily wear Pre-applied automotive-grade adhesive tape ensures a secure, vibration-resistant bond No tools, no drilling, no permanent modification — fully reversible installation Installed in under two minutes — a genuine weekend upgrade with lasting visual impact One-piece design sits flush against the OEM surface with no visible gaps or proud edges Enhances the perceived quality of the centre console without altering button function Pairs naturally with other chrome interior trim upgrades for a cohesive, elevated cabin aesthetic Compatibility Model Code Years Compatibility Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2022 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Velar L560 2017–2023 Not Compatible Defender L663 2020–2026 Not Compatible Range Rover Evoque L551 2019–2026 Not Compatible Unsure about your specific model year or build? Call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes 🛠 Difficulty: Very Easy  ·  ⏱ Estimated Time: Under 2 Minutes  ·  🔧 Tools Required: None Thoroughly clean the existing gear shift button surround using an isopropyl alcohol wipe or a lint-free cloth. Ensure the surface is fully dry before proceeding — any residue or moisture will affect adhesion. Remove the protective film from the pre-applied adhesive tape on the reverse face of the trim piece. Handle the chrome face carefully to avoid fingerprints. Align the trim piece carefully over the gear selector button surround, confirming the orientation matches before contact is made. Apply firm, even pressure across the entire surface for 30–60 seconds, working from the centre outward to eliminate any air pockets beneath the trim. Allow the adhesive to cure for at least one hour before exposing the area to direct sunlight or elevated cabin temperatures. ⚠ Important: Do not apply to surfaces that are damp, freshly conditioned with leather products, or recently cleaned with silicone-based dressings. These will prevent the adhesive from bonding correctly. If you need to reposition the trim, do so gently and immediately — once fully cured, repositioning may reduce bond strength. Elevate Every Detail At Victorious Automotive, we believe the interior of your Range Rover should reflect the same standard of finish as the exterior. This gear shift trim is a small change with a disproportionate visual return — and it's backed by our 30-day money-back guarantee. Shop All Range Rover Vogue Accessories Shop All Range Rover Sport Accessories Buying two items? Use code 22GET20 at checkout for 20% off. ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners. Swarovski® is a registered trademark of Swarovski AG — crystal-style accents included with this product are decorative aftermarket elements and are not manufactured by or affiliated with Swarovski AG.

Victorious Automotive · Land Rover Discovery 4 LR4 · Interior Protection Silver Anti-UV Sunshade for Front Windscreen — Land Rover Discovery 4 LR4 (2004–2016) Purpose-cut UV-reflective windscreen sunshade for the Discovery 4 LR4 — keeps your cabin cooler, your dashboard protected, and your interior looking factory-fresh for longer. Discovery 4 LR4 2004–2016 Silver Reflective Tape Anti-UV Interior Protection Front Windscreen Easy Fit No Tools Required Overview The Land Rover Discovery 4 LR4 is one of the most capable and well-appointed 4x4s ever produced — a vehicle that rewards its owner with a premium interior that deserves to be maintained as such. Whether your Discovery spends its days navigating city streets or parked under the open sun on an overland adventure, prolonged UV exposure takes a measurable toll on dashboards, leather trims, and switchgear. Prevention costs a fraction of restoration. This front windscreen sunshade has been specifically designed to fit the Discovery 4 LR4 produced between 2004 and 2016. Constructed from high-quality silver reflective tape material, it sits across your windscreen and immediately deflects solar radiation before it can penetrate the glass — reducing cabin temperature, protecting your interior surfaces, and preserving the condition of your instrument panel and seating surfaces over the long term. The silver finish is highly effective at reflecting both visible light and infrared radiation, while the straightforward double-sided adhesive tab system means fitting takes under two minutes with no tools, no modifications, and no fuss. It's the kind of thoughtful, understated accessory that Discovery 4 owners appreciate — genuinely useful, properly made, and exactly right for the vehicle. What's Included 🪟 Front Windscreen Sunshade Silver anti-UV panel, pre-cut for Discovery 4 LR4 📋 Installation Guide Simple fitting instructions included Product Highlights Purpose-designed fit for the Discovery 4 LR4 windscreen profile Silver reflective surface actively deflects UV and infrared radiation Significantly reduces cabin temperature when parked in direct sun Prevents dashboard cracking, fading, and material degradation Protects leather seats and interior trim from UV bleaching Quick installation via double-sided adhesive — no tools required Lightweight and easily stored when not in use Durable silver tape material resists heat, moisture, and warping Maintains clear windscreen visibility when properly positioned Compatible with all Discovery 4 LR4 variants across the 2004–2016 range Compatibility Model Code Year Range Fit Land Rover Discovery 4 LR4 / L319 2009–2016 Direct Fit Land Rover Discovery 3 LR3 / L319 2004–2009 Direct Fit Land Rover Discovery 5 L462 2017–Present Not Compatible Range Rover Sport L320 2005–2013 Not Compatible Range Rover Vogue L322 2002–2012 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Time: Under 5 Minutes  ·  🔧 Tools Required: None Park your Discovery 4 LR4 on a flat surface and ensure the windscreen interior is clean and free of dust or grease before fitting. Unfold the sunshade fully and orient it with the silver reflective face pointing outward toward the glass. Position the sunshade across the full width of your windscreen, aligning it with the top edge of the dashboard. Use the integrated double-sided adhesive tabs to secure the shade in place — press firmly against the glass or sun visor to ensure adhesion. Adjust as needed to ensure full windscreen coverage with no gaps at the edges where sunlight may enter. When not in use, fold the shade neatly and store in the boot or under a seat — it takes up minimal space. ⚠ Note: Do not drive with the sunshade in position across the windscreen. This product is designed for use only when the vehicle is stationary and parked. Ensure the shade is fully removed and stowed before moving the vehicle. Shop the Full Discovery 4 Collection Explore our full range of interior and exterior accessories curated specifically for the Land Rover Discovery 4 LR4 — all precision-fit, all designed to preserve and enhance your vehicle. Browse Discovery 4 Accessories 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for compatibility identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Console Trim for Land Rover Range Rover Velar 2017 2018 A precision-cut ABS silver console upgrade trim that instantly elevates the centre console aesthetic of your Range Rover Velar with a clean, factory-complementary finish. Range Rover Velar 2017–2018 ABS Material Silver Finish Interior Trim No-Drill Fit ISO9001 Certified Model: LLK1350 Overview The Range Rover Velar arrived in 2017 as one of Land Rover's most design-forward statements — an interior shaped by restraint, precision, and a clear commitment to visual clarity. Every surface in the Velar's cabin was considered, and owners who want to preserve or sharpen that sense of premium detail understand that even small upgrades need to be done properly. This silver console trim is engineered specifically for the 2017 and 2018 Range Rover Velar and is designed to sit seamlessly within the existing centre console architecture. Manufactured from high-grade ABS plastic with a silver finish, it matches the Velar's existing trim language without overpowering it — bringing a subtle metallic lift to an interior zone that sees constant daily interaction. At 55cm in length and weighing just 500g, the trim is slim, precisely dimensioned, and straightforward to install using the pre-applied automotive-grade adhesive tape already bonded to the rear face. No drilling, no cutting, no specialist tools — just a clean, lasting result that looks as though it belonged there from the factory floor. What's Included 🪄 Silver Console Trim Panel ABS silver finish, model LLK1350 🔲 Pre-Applied Adhesive Tape Automotive-grade, bonded to rear face 📋 Fitting Guide Basic installation reference included Product Highlights Precision-fit design for Range Rover Velar 2017 and 2018 models High-grade ABS construction with durable silver finish Pre-applied automotive adhesive tape for clean, tool-free installation ISO9001 certified manufacturing process for quality assurance Lightweight at 500g — no stress on existing trim or panels Dimensionally accurate at 55cm × 30cm × 10cm for precise fit Complements the Velar's existing interior trim without clashing No drilling, cutting, or permanent modification required Factory-look finish that integrates naturally with OEM surfaces Designed and tested by metyoucar, a specialist interior trim brand Compatibility Vehicle Year Trim Level Fitment Range Rover Velar 2017 All variants Direct Fit Range Rover Velar 2018 All variants Direct Fit Range Rover Velar 2019–2022 All variants Verify Before Purchase Range Rover Sport L494 2013–2020 All variants Not Compatible Range Rover Evoque L538 All years All variants Not Compatible Range Rover Vogue L405 All years All variants Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 15–30 minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the centre console surface is free from dust, grease, and any existing polish or wax residue — isopropyl alcohol works well for this. Dry-fit the trim panel first to confirm alignment and positioning before committing to adhesion. The panel should sit flush and natural against the console contours. Once satisfied with positioning, peel back the protective liner from the pre-applied automotive adhesive tape on the rear face of the trim. Carefully align the trim from one end and press firmly along the full length, applying consistent pressure for 30–60 seconds to ensure full bond contact. Allow the adhesive to cure for a minimum of 1 hour before exposing the area to heat, sunlight, or significant handling. Full bond strength is typically achieved within 24 hours. ⚠ Note: Avoid installation in cold environments below 10°C as this can reduce initial adhesive performance. Do not attempt to reposition the trim once the adhesive has made contact with the console surface — the bond is designed to be permanent. Complete Your Velar Interior Browse our full collection of Range Rover Velar accessories — from interior trim upgrades to exterior styling pieces — curated specifically for the Velar's unique design language. Shop Range Rover Velar Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and compatible accessories. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover (JLR), or any of their subsidiary brands. All vehicle names, model references, and trademarks are used solely for fitment identification purposes and remain the property of their respective owners.

Victorious Automotive · Range Rover Velar · Interior Trim Silver Aluminium Door Speaker Panel Trim for Range Rover Velar 2017–2018 Precision-cut aluminium alloy speaker surround panels that replace the factory plastic trim and instantly elevate the door card aesthetics of your Velar's interior. Range Rover Velar 2017–2018 Aluminium Alloy Silver Finish Interior Trim LLK1146 ISO9001 Certified No Drilling Required Overview The Range Rover Velar arrived as a design-forward statement from Land Rover — a vehicle where interior detailing was elevated to something genuinely considered. Every surface, every material choice in the Velar's cabin was deliberate. The speaker panels on the door cards are a prime example: they sit in your sightline every time you glance at the door, and the stock plastic surrounds, while functional, do little justice to the cabin's overall intent. These silver aluminium alloy door speaker panel trims are designed specifically for the 2017 and 2018 Range Rover Velar. Machined from lightweight aluminium alloy, they deliver a cooler, more refined surface finish compared to the factory plastic — catching ambient light in the way that premium materials do. The silver tone pairs naturally with the Velar's interior colour palette, complementing brushed trim inserts and contrasting tastefully against both light and dark upholstery choices. Installation requires no modification whatsoever. Each panel is backed with high-strength automotive double-sided tape, meaning a clean fit with no tools, no drilling, and no permanent changes. If you're the sort of owner who values the Velar's design language and simply wants the interior details to reflect that more completely, these trims are a straightforward, satisfying upgrade. What's Included 🔊 Door Speaker Panel Trims Full set of aluminium alloy surrounds for door speaker apertures 🔲 Pre-Applied Adhesive Tape High-bond automotive double-sided tape pre-fitted to each panel 📄 Installation Instructions Step-by-step guide included for clean, accurate fitment Product Highlights Precision-cut aluminium alloy construction for lasting quality Silver finish complements the Velar's premium interior palette Manufactured to ISO9001 quality management standards Pre-applied automotive-grade double-sided adhesive tape No drilling, cutting, or permanent modification required Direct OEM-location fitment — designed specifically for Velar door cards Lightweight at 524g total — no impact on door function or feel Significantly upgrades the visual quality over factory plastic surrounds Reversible installation — can be removed without damage Fully compatible with factory door speaker and audio systems Compatibility Vehicle Year Range Trim / Variant Fitment Range Rover Velar 2017–2018 All Trim Levels (S, SE, HSE, R-Dynamic) Direct Fit Range Rover Velar 2019–2022 Post-facelift Models Verify Before Purchase Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Sport L494 2013–2020 All Variants Not Compatible Range Rover Vogue L405 2013–2020 All Variants Not Compatible Defender L663 2020–2024 All Variants Not Compatible If your Velar is a 2019 or later model, please contact us on +44 203 943 9919 before ordering so we can confirm fitment for your specific build date. Installation Notes 🛠 Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Begin with a clean, dry interior. Ensure the door card surfaces around the speaker apertures are free from dust, grease, or any residue — use an isopropyl alcohol wipe for best adhesion results. Dry-fit each panel against the speaker surround before removing the adhesive backing. Confirm alignment and positioning carefully against the factory speaker grille location. Once satisfied with alignment, peel back approximately one third of the tape backing. Carefully position the leading edge of the panel, pressing firmly as you peel and lay the remainder of the tape. Apply sustained firm pressure across the entire panel surface for 30–45 seconds to ensure full adhesive contact with the door card. Repeat for all remaining door speaker panels. Allow 30 minutes before closing doors or applying lateral pressure to the trim. ⚠ Note: Do not attempt installation in cold temperatures below 10°C — adhesive performance may be reduced. If installing in cooler conditions, warm the door card surface gently with a heat gun on a low setting before applying panels. Upgrade Your Velar's Interior Browse the full range of Range Rover Velar interior accessories at Victorious Automotive — curated specifically for owners who hold their vehicle to a higher standard. Shop Range Rover Velar Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners. Always verify compatibility with your specific vehicle before purchase.

Victorious · Defender 90/110 · Exterior Grilles Silver ABS Front Grille Kit for Land Rover Defender 90 & 110 Premium replacement grille assembly with dual surrounds and mounting brackets – restores factory aesthetics or enables custom styling. Defender 90 Defender 110 1990–2016 ABS Plastic Silver & Black 5-Piece Kit Overview Land Rover Defender 90 and 110 models demand authentic OEM-specification front grille components. This silver ABS replacement kit restores the factory front fascia to factory condition or enables a modern two-tone aesthetic that complements aftermarket bumpers and bull bars. The kit comprises a middle grille panel, dual side surrounds, and all necessary stainless steel mounting brackets. ABS construction resists UV fade and weathering far better than painted alternatives, and the silver-and-black finish integrates seamlessly with both classic and contemporary Defender builds. Direct replacement fitment requires no modification to mounting points. All hardware is included; installation typically takes 45–90 minutes with standard hand tools. What's Included ◆ Middle Front Grille 1 × Centre grille panel, silver finish ◆ Grille Surrounds 2 × Left & right surround trims ◆ Mounting Brackets 2 × Stainless steel fixing brackets ✓ Hardware Pack All fasteners & clips included Product Highlights 100% brand new ABS construction – no refurbished or recycled material Two-tone silver & black finish – factory-authentic or custom-ready Direct bolt-on fitment – no modification to Defender fascia required UV-stable polymer – resists fading and weathering better than painted alternatives Complete hardware – all brackets and fasteners pre-included Defender 90 & 110 compatible – fits both wheelbase variants Easy 45–90 minute install – achievable with basic hand tools Improves front end appearance – refreshes worn or damaged grille areas Paired with bull bars & bumpers – complements most aftermarket upgrades 30-day fit guarantee – hassle-free return if incompatible with your build Compatibility Model Year Range Fit Status Defender 90 (3-door) 1990–2016 Direct Fit Defender 110 (5-door) 1990–2016 Direct Fit Defender 130 1990–2016 Not Compatible Discovery 1–4 1989–2016 Not Compatible Range Rover Classic / P38 1970–2002 Not Compatible Installation Guide Difficulty: Beginner | Time: 45–90 mins Disconnect battery negative terminal to prevent accidental short circuits while working near electrical components. Remove existing grille assembly – unclip or unbolt the factory grille from the front fascia. Keep fasteners in a labelled container. Clean mounting surface – wipe away debris, old adhesive, or corrosion using a dry cloth and mild degreaser. Install side surrounds first – fit left and right surround panels using the provided stainless brackets. Ensure clips engage fully. Mount centre grille panel – align the middle grille with the surround panels and secure using all fasteners. Check for even gaps. Verify all connections – tug each component to confirm tight fitment. No rattling or movement should occur. Reconnect battery – restore power and test any integrated lighting (if applicable). Note: Allow 1–3 mm variation in fitment due to manual measurement tolerances. If surrounds are slightly misaligned, use plastic shims under the brackets to adjust. Do not force components into place; gentle pressure indicates correct seating. Ready to Restore Your Defender's Front End? Silver ABS grille kits are a fast, cost-effective way to refresh a tired fascia or complete a modern exterior refresh. Fits Defender 90 & 110 models from 1990–2016. All hardware included; 30-day money-back guarantee on all orders. Add to Cart Or use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ reviews 🚚 Worldwide DHL, FedEx, UPS, TNT ☎️ +44 203 943 9919 – Mon–Fri 9am–7pm ✓ 30-day money-back guarantee Victorious Automotive is an independent aftermarket specialist. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product compatibility information is provided in good faith; please verify fitment with your vehicle's documentation before purchase. ```

Victorious Automotive · Defender · Interior Protection Silver Front Windshield Sun Shield for Land Rover Defender (2004–2022) Premium UV-reflective parasol sun shade—keeps your Defender's cabin cool and protects interior trim from fading. Defender 2004–2022 Full Window Coverage Silver Composite UV Protection Easy Install Overview If you own a Defender—whether a classic 2004 model or a modern L663—you know how quickly cabin heat builds under the sun. Dashboard materials fade, door cards discolour, and your steering wheel becomes uncomfortably hot on long journeys. This silver front windshield sun shield addresses all of that. Engineered from premium composite material in an ISO 9001 certified facility, this parasol delivers maximum solar reflection with minimal bulk. The reflective silver finish bounces away UV rays before they penetrate the glass, reducing cabin temperature by up to 15°C and preventing long-term UV damage to your interior. Installation takes under two minutes—no tools, no adhesives, no permanent marks. Simply unfold, position, and secure. When you exit the vehicle, roll it up and stow it in the supplied carrying pouch. It's the most practical defence against sun damage you can buy for your Defender. What's Included ☀️ Sunshield Parasol Silver composite, full windshield coverage 🎒 Carrying Pouch Compact storage for car or garage Product Highlights Engineered composite material—lightweight yet durable ISO 9001 certified manufacturing Reflective silver finish maximises UV rejection Full front windshield coverage—no blind spots Reduces cabin temperature by up to 15°C Blocks harmful UV rays that fade interior trim Folds compactly for easy storage No suction cups, no adhesive—completely non-permanent Takes under 2 minutes to install or remove Works with all Defender variants 2004–2022 Compatibility Defender Model Year Range Fit Status Defender 90 / 110 2004–2016 Direct Fit Defender 90 / 110 2017–2019 Direct Fit Defender L663 (New) 2020–2022 Direct Fit Installation Difficulty: Beginner | Time: 2 minutes Open your Defender's driver door and stand outside facing the windshield Unfold the silver shade fully—it should span the entire front window width Position the top edge against the interior base of the windshield frame Secure the bottom edge using the integrated friction tabs or dashboard ledge Adjust left and right edges for maximum coverage—no gaps at the pillars When exiting, roll gently and store in the included pouch Note: Never drive with the sunshield in place. Always remove before operating your vehicle. Ensure it's fully secured and won't fall during entry or exit. Protect Your Defender's Interior Today Sun damage is permanent. Interior fade, cracked door cards, and warped trim are expensive to repair. This silver windshield shade costs a fraction of a restoration and takes seconds to deploy. Every parking session counts—protect your investment now. Shop Defender Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars · 12,300+ reviews 🚚 Worldwide Shipping · DHL, FedEx, UPS, TNT ✅ 30-Day Guarantee · Money back, no questions 📞 Expert Support · +44 203 943 9919 Disclaimer: Victorious Automotive is an independent accessory manufacturer and retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official Land Rover distributors. All vehicle names, logos, and specifications are the property of their respective owners. Product compatibility is provided in good faith based on standard OEM measurements; individual vehicles may vary. Always verify fitment with our support team before purchase.

Victorious Automotive · Range Rover Evoque L538 · Interior Trim Silver Interior Frame Trim for Range Rover Evoque L538 2012–2018 A precision-cut, glue-fit ABS silver trim overlay that refreshes the interior frame detailing of your Evoque with a clean, factory-finish aesthetic — no drilling, no damage. Evoque L538 2012–2018 ABS Material Silver Finish Glue-Fit Install Interior Trim OEM Sizing 100% New ONESTICKERS Overview The Range Rover Evoque L538, produced between 2012 and 2018, established itself as one of Land Rover's most design-forward vehicles — a compact SUV that blended urban style with genuine off-road capability. Inside, the cabin reflects that ambition, but over time interior trim pieces can fade, scuff, or simply begin to look dated against the overall character of the car. This Silver Interior Frame Trim is a direct-fit ABS overlay designed to sit seamlessly over the existing interior frame surfaces of the Evoque L538. Finished in a clean silver tone with a 3D profile, it restores a sharp, premium look to one of the most visually prominent areas of the cabin. The adhesive-backed fitment means installation is clean and reversible, with no permanent modification required. Manufactured to OEM dimensions under the ONESTICKERS brand, this trim piece is precision-engineered to match the exact contours of the Evoque's interior frame — so it sits flush, looks factory, and protects the underlying surface from everyday contact wear at the same time. What's Included 🪟 Silver Frame Trim Overlay ABS silver trim piece, OEM-matched sizing 🔧 Pre-Applied Adhesive Glue backing ready for fitment 🧹 Clean-Fit Design No drilling or cutting required 📦 Direct Dispatch Ships worldwide via DHL, FedEx, UPS, TNT Product Highlights Precision-cut to OEM Evoque L538 frame dimensions High-quality ABS construction — durable and lightweight Silver finish adds a premium, contemporary interior tone 3D profile sits flush with existing trim surfaces Pre-applied adhesive backing for clean installation Protects original trim from scuffs and contact wear No drilling, cutting or permanent modification needed Fully reversible — can be removed without damage 100% brand new — not a refurbished or remanufactured part Compatible with all Evoque L538 variants, 2012–2018 Compatibility Vehicle Code Year Range Fit Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Evoque (Facelift) L538 2016–2018 Direct Fit Range Rover Evoque Convertible L538 2016–2018 Direct Fit Range Rover Evoque L551 2019–Present Not Compatible Range Rover Velar L560 2018–Present Not Compatible Discovery Sport L550 2015–Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–25 minutes  ·  Tools Required: None Thoroughly clean the target interior frame surface using an isopropyl alcohol wipe. Remove all dust, grease, and residue, then allow to dry completely before proceeding. Dry-fit the trim overlay against the frame surface to confirm alignment and verify the OEM size is correct for your specific Evoque variant and year. Peel back a small section of the adhesive backing and carefully position the trim piece from one end, pressing firmly as you go to avoid air bubbles or misalignment. Once fully seated, apply firm, even pressure across the entire trim surface for 30–60 seconds to ensure the adhesive bonds correctly to the substrate. Allow the adhesive to cure for at least 24 hours before exposing the trim to moisture, cleaning products or direct sunlight for extended periods. ⚠ Note: Ensure the cabin temperature is above 15°C (59°F) at time of installation. Cold surfaces significantly reduce adhesive bond strength. Do not attempt to reposition the trim repeatedly once the adhesive has made contact. Finish Your Evoque Interior the Right Way At Victorious Automotive, we stock a full range of interior and exterior accessories for the Range Rover Evoque L538. Browse the complete collection or get in touch with our team if you need guidance on fitment or compatibility. Shop Range Rover Evoque L538 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and accessory products for Land Rover and Range Rover vehicles. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Vogue & Sport · Interior Controls Silver Left Window Control Button — Range Rover Vogue L405 & Sport L494 (2014–2017) A precision-fit matte silver window control button for the driver's left-hand switch panel — a direct, factory-style upgrade that lifts your L405 or L494 interior without compromise. L405 Vogue L494 Sport 2014–2017 Matte Silver Left Window Button Laser-Cut Plastic Peel & Stick Interior Upgrade Overview The Range Rover Vogue L405 and Sport L494 are vehicles defined by their attention to detail — and the interior switchgear is no exception. Over time, the original window control buttons can show wear, discolouration, or simply no longer reflect the level of finish you expect from a vehicle of this calibre. This silver left window control button is designed specifically to address that, restoring a clean, premium look to one of the most frequently touched surfaces in the cabin. Manufactured from high-quality laser-cut plastic in a refined matte silver finish, this button is engineered to sit flush and true against the door panel — precisely where the original sits. The matte tone has been carefully chosen to complement the factory interior trim palette found across Vogue and Sport variants produced between 2014 and 2017, delivering a cohesive, factory-plausible result rather than an aftermarket add-on aesthetic. Installation requires no specialist tools, no wiring, and no modification to your vehicle. The peel-and-stick application means the upgrade can be completed in under five minutes, making it one of the most accessible interior refinements available for these models. It's the kind of detail that's immediately noticeable to anyone who knows these vehicles — and entirely invisible to those who don't. What's Included 🪟 Left Window Control Button Matte silver, driver's side — single unit 🔲 Pre-Applied Adhesive Backing Peel-and-stick ready, no primer needed 📋 Installation Guide Step-by-step fitment instructions included Product Highlights Precision laser-cut for exact fitment on L405 and L494 switch panels Matte silver finish complements factory interior trim tones Covers the left-hand window control position on the driver's door No drilling, wiring, or tools required for installation Peel-and-stick adhesive backing for a clean, residue-free fit Installs in under 5 minutes — single-person job High-quality plastic construction built for daily tactile use Restores a factory-fresh appearance to worn or faded controls Colour-consistent with silver interior trim accessories Backed by Victorious Automotive's 30-day money-back guarantee Compatibility Model Code Year Range Fitment Range Rover Vogue L405 2013–2017 Direct Fit Range Rover Sport L494 2014–2017 Direct Fit Range Rover Velar L560 2017–2019 Direct Fit Discovery 5 L462 2017–2019 Direct Fit Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Installation Notes ⏱ Difficulty: Beginner  |  Estimated Time: Under 5 Minutes  |  Tools Required: None Ensure the door panel and existing window control surface are clean and dry. Use a dry microfibre cloth to remove any dust, grease, or moisture from the target area. Dry-fit the silver button over the existing control to confirm alignment before committing. It should sit flush and level with no overhang. Peel the protective backing from the adhesive layer on the underside of the button, taking care not to touch the adhesive surface. Carefully align the button over the left window control switch and press firmly for 10–15 seconds to activate the adhesive bond. Allow 30 minutes before regular use to ensure the adhesive sets fully — particularly in cold ambient temperatures. ⚠ Please Note: Verify your exact model year and door panel variant before purchasing. Some early 2013 L405 Vogue models may feature a slightly different switch panel layout. If in doubt, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering. Built for Range Rover Owners Who Care At Victorious Automotive, every product we stock is chosen with one standard in mind — would we fit it to our own vehicle? Browse our full Range Rover Vogue L405 and Sport L494 collections for accessories that match this level of detail. Shop Range Rover Vogue L405 → Shop Range Rover Sport L494 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks are referenced solely for the purpose of product compatibility identification. Always verify fitment with your specific vehicle before purchasing.

Victorious Automotive · Range Rover Sport L494 · Front Grille Silver Front Upper Radiator Grille Upgrade — Range Rover Sport 2018–2022 A direct-fit silver ABS grille replacement that instantly refreshes the front fascia of your Range Rover Sport L494, delivering a cleaner, more contemporary look with no permanent modifications required. Range Rover Sport L494 2018–2022 Silver Finish ABS Plastic Upper Radiator Grille Direct Fit No Drilling Required Facelift Model Overview The Range Rover Sport L494 facelift — produced from 2018 through 2022 — represents one of Land Rover's most assertive designs, with a bold front end that demands an equally considered grille. Whether your factory unit has aged, sustained minor damage, or you simply want to update the aesthetic, this silver upper radiator grille offers a compelling and cost-effective solution. Manufactured from high-grade ABS plastic and finished in a clean silver tone, this grille has been engineered to replicate the geometry and mounting points of the original Land Rover component. The result is a seamless fit that looks factory-correct from the moment it's in place — no fillers, no adapters, no guesswork. The open mesh construction also maintains proper airflow to the radiator, so there's no compromise on cooling performance. This upgrade is particularly well suited to owners looking to differentiate their Sport from the standard black grille specification, or those restoring a facelift model to a pristine front-end appearance. It's a straightforward modification that makes a disproportionately large visual impact — exactly the kind of considered upgrade Range Rover Sport owners appreciate. What's Included 🪟 Upper Radiator Grille Silver ABS, full front upper section 🔩 Mounting Clips Pre-fitted retention tabs for OEM-style fit 📋 Fitting Reference Basic installation guidance included Note: Land Rover badge / emblem is not included. Your original badge can be transferred from the factory grille. Product Highlights Precision-engineered for 2018–2022 Range Rover Sport L494 facelift models High-grade ABS plastic construction — lightweight yet durable Silver finish provides a clean, premium visual upgrade Open mesh design maintains full radiator airflow Direct OEM replacement — uses factory mounting points No drilling, cutting, or permanent modifications required Strict factory QC testing on every unit before dispatch Significantly more affordable than a dealer replacement part Original badge transfers directly from your existing grille Suitable for both personal builds and professional refits Compatibility Vehicle Code Years Fit Range Rover Sport Facelift L494 2018–2022 Direct Fit Range Rover Sport Pre-Facelift L494 2013–2017 Not Compatible Range Rover Sport New Gen L461 2022–2026 Not Compatible Range Rover Vogue L405 / L460 All Years Not Compatible Range Rover Velar L560 All Years Not Compatible Defender L663 All Years Not Compatible If you're unsure whether this grille is correct for your specific build year or trim level, call our team on +44 203 943 9919 before ordering. Installation Notes Difficulty: Beginner · Estimated Time: 30–60 Minutes · Tools Required: Trim removal tool, flathead screwdriver Park the vehicle on a flat surface and allow the engine to cool completely before working near the front fascia. Open the bonnet and locate the upper retaining clips securing the factory grille to the bumper surround — typically six to eight clips across the top edge. Using a plastic trim removal tool, carefully release each clip in sequence, working from the centre outward to avoid stressing the surrounding bumper trim. With the top clips released, gently pull the upper grille forward and away from the vehicle. It may also be retained by lower tabs — release these carefully before fully removing. If transferring your factory Land Rover badge, locate the retention pins on the reverse of the original grille and press them through to release the badge cleanly. Align the new silver grille in position, ensuring all mounting tabs locate correctly into the bumper surround. Press firmly and evenly along the top edge until all clips engage with an audible click. Fit the badge to the new grille using the existing aperture and retention system. Step back, inspect the panel gaps, and confirm a clean, even fit. ⚠ Important: Take your time releasing the factory clips — forcing them risks cracking the surrounding bumper trim. A plastic trim tool is strongly recommended over metal alternatives. If in doubt, consult a professional installer. Upgrade Your Range Rover Sport Today This silver grille is one of the simplest and most effective visual upgrades available for the 2018–2022 Range Rover Sport. Browse the full Sport L494 accessory range at Victorious, or get in touch with our team if you need guidance on fitment. Shop Range Rover Sport L494 → 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 📦 Worldwide Shipping via DHL, FedEx, UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification. All products are aftermarket components and are not OEM Land Rover parts.

Victorious Automotive · Defender L663 · Interior Trim Silver Aluminium Speaker Cover Set for 2020 Land Rover Defender L663 A precision-cut set of eight aluminium alloy speaker covers engineered to integrate seamlessly into the 2020 Defender's interior — elevating the cabin's tone with a brushed silver finish that feels factory-intentional. Defender L663 2020 Aluminium Alloy Silver Finish Set of 8 Adhesive Fit Interior Trim ISO9001 Certified Overview The 2020 Land Rover Defender L663 marked a defining moment for the nameplate — a thoroughly modern reinterpretation of an icon, with a cabin that balances rugged utility and refined detail in equal measure. Owners who appreciate that balance understand that every surface inside the Defender tells a story, and the speaker grilles are no exception. Left in their standard finish, they can feel like a missed opportunity. Upgraded, they become a quiet statement of intent. This Silver Speaker Cover Set has been developed specifically for the 2020 Defender, with each of the eight pieces precision-cut from aircraft-grade aluminium alloy and finished in a cool brushed silver that complements the Defender's existing interior colour palette. The result is a cohesive, upscaled look that reads as premium without ever feeling overdone — the kind of upgrade that makes you notice it immediately on installation, then forget it was ever any other way. Installation requires no specialist tools and no permanent modification to the vehicle. Each cover arrives with pre-applied automotive-grade adhesive tape, allowing a clean, confident bond to the existing speaker surrounds in a matter of minutes. Whether you drive a daily Defender 90 or a weekend Defender 110, this set delivers a tangible interior improvement that punches well above its price point. What's Included 🔊 Speaker Covers × 8 Full set — front and rear positions covered 🔖 Pre-Applied Adhesive Tape Automotive-grade, heat-resistant bond included on each piece 📋 Installation Guide Step-by-step instructions for a clean, confident fit 📦 Protective Packaging Each cover individually protected to prevent transit damage Product Highlights Designed exclusively for the 2020 Land Rover Defender L663 interior Brushed silver aluminium alloy — premium material, lasting finish Set of 8 covers for comprehensive interior coverage Pre-applied automotive adhesive — no drilling, no damage ISO9001 certified manufacturing for consistent quality Lightweight construction — no added bulk or vibration risk Corrosion-resistant finish suited to varied climates Refined silver tone complements both dark and light Defender cabins Direct-fit design — no trimming or modification required Reversible install — leaves no lasting marks on OEM trim Compatibility Model Code Year Range Fit Land Rover Defender 90 L663 2020 Direct Fit Land Rover Defender 110 L663 2020 Direct Fit Land Rover Defender 130 L663 2020 Direct Fit Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 20–30 Minutes  ·  🔧 Tools Required: None Begin with a clean, dry interior. Remove any dust or grease from the existing speaker surrounds using an isopropyl alcohol wipe — this is the single most important step for a lasting bond. Allow the cleaned surfaces to dry completely for at least 2–3 minutes before proceeding. Dry-fit each cover to its corresponding speaker surround to confirm position and orientation before committing to adhesion. Peel back the protective film from the pre-applied adhesive tape on the first cover, aligning it carefully with the speaker surround before pressing into place. Apply firm, even pressure across the full surface of each cover for 30–60 seconds to activate the adhesive bond. Repeat for all remaining covers, working systematically around the cabin. Allow the adhesive to fully cure for a minimum of 24 hours before exposing the covers to moisture or extreme temperatures. ⚠ Note: Avoid installation in temperatures below 10°C — cold surfaces significantly reduce the initial adhesive bond strength. If your Defender has been stored in a cold garage, allow the interior to warm up to ambient room temperature before fitting. Complete Your Defender's Interior This speaker cover set is just one piece of a wider interior transformation. Explore our full range of Defender L663 accessories — from dashboard trim to door handle covers — all curated specifically for the 2020 Defender. Shop All Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All brand names, vehicle model names, and codes referenced are used solely for the purpose of fitment identification. Product model: LLK2816. Dimensions: 30cm (L) × 15cm (W) × 10cm (H). Weight: 300g. Certification: ISO9001.

Victorious Automotive · Defender L663 · Exterior Protection Smoked Black Headlight Tint Protective Film — Land Rover Defender L663 (2020–2026) A precision-cut, self-healing TPU film that wraps your Defender's headlights in a smoked black finish — protecting against stone chips and scratches while sharpening the truck's already purposeful aesthetic. Defender L663 2020–2026 Self-Healing TPU Smoked Black Precut Fit Scratch Resistant Stone Chip Protection No-Drill Install Overview The Defender L663 is a vehicle that demands a certain visual language — purposeful, bold, and uncompromised. Its wide-set LED headlight clusters are one of its most defining features, sitting prominently across the squared-off front end and drawing immediate attention. Keeping them looking their best — particularly against road debris and fine scratches accumulated on longer drives — is a priority for any owner who takes the Defender seriously. This Smoked Black Headlight Tint Protective Film is custom precut to match the exact profile of the Defender L663's headlight housings. Made from imported self-healing thermoplastic polyurethane (TPU), the film bonds cleanly to the lens surface, delivering a deep, darkened tint that complements the Defender's rugged character without obscuring light output in any meaningful way. It sits flush and invisible at the edges — no lifting, no bubbling, no amateur finish. Where standard protective films simply guard against damage, this smoked variant does double duty: it elevates the exterior appearance while absorbing the fine abrasions and minor stone impacts that would otherwise gradually dull your headlight lenses. For Defender owners who use their vehicle as intended — whether on gravel tracks, open motorways, or everything in between — this is an investment that pays back in both protection and presence. What's Included 🎯 Precut Headlight Film × 2 One per headlight, custom cut for Defender L663 🧰 Installation Tool Kit Squeegee pad and application tools included complimentary 💧 Wet Application Method Water-slide installation allows repositioning before set 📋 Installation Guide Step-by-step instructions for a clean first-time fit Product Highlights Custom precut to the exact headlight profile of the Defender L663 Self-healing TPU material recovers from light surface scratches over time Deep smoked black tint sharpens the Defender's front-end presence Guards against stone chips, grit abrasion, and road debris impacts Maintains optical clarity without noticeably reducing light output Pressure-sensitive adhesive bonds firmly without damaging the lens Bubble-free wet installation with repositioning window before cure Residue-free removal — no damage to headlight surface on take-off UV-stable formulation resists yellowing and fading over time Seamless edge finish with no visible overhang or lifting at corners Compatibility Model Code Year Range Fit Defender 90 L663 2020–2026 Direct Fit Defender 110 L663 2020–2026 Direct Fit Defender 130 L663 2022–2026 Direct Fit Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes 🛠 Difficulty: Beginner · Est. Time: 20–35 minutes Thoroughly clean the headlight lens with isopropyl alcohol and allow to dry completely — any residue or moisture beneath the film will compromise adhesion. Lightly mist the headlight surface and the adhesive side of the film with clean water — this gives you a working window to reposition before the film sets. Carefully peel the film backing and align the precut edges with the headlight housing contours, starting from the centre and working outward. Using the included squeegee pad, press firmly from the centre outward in smooth, overlapping strokes to eliminate all water and air pockets beneath the surface. Run a finger or the edge of the squeegee around the perimeter to seal all edges cleanly — pay particular attention to corners and curves. Allow the film to cure undisturbed for at least 24 hours before exposing the vehicle to rain, washing, or direct pressure. ⚠ Important: Do not apply in direct sunlight or in temperatures below 10°C — cold or excessively hot conditions affect adhesive performance and can prevent a clean, bubble-free bond. Application in a shaded garage environment is strongly recommended. Built for Defenders. Backed by Victorious. Every product in our Defender L663 collection is selected by enthusiasts who own and drive these vehicles. If you have questions before ordering, our team is available Monday to Friday, 9am–7pm on +44 203 943 9919. Shop All Defender L663 Accessories Use code 22GET20 — 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 Expert Support Mon–Fri, 9am–7pm Victorious Automotive is an independent retailer and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Land Rover · Range Rover Sport L320 · Rear Lighting Smoked Look Rear Lamps — Range Rover Sport L320 (2005–2013) A bold, darkened aesthetic upgrade for your L320 Sport — direct-fit tail light assemblies that transform the rear end without compromising on visibility or road legality. L320 2005–2013 Smoked Finish PC + ABS Construction 12V Tail Light Assembly Direct Fit CCC Certified 6kg Pair Overview The Range Rover Sport L320 was a turning point for Land Rover — sharper, more athletic, and distinctly purposeful compared to anything the brand had produced before it. Produced from 2005 through to 2013 across multiple facelifts and trim levels, the L320 remains one of the most recognisable performance SUVs of its era. Owners who have held onto these vehicles — or recently acquired one — understand that keeping it looking sharp is just as important as keeping it mechanically sound. These smoked look rear lamp assemblies are purpose-designed for the L320 chassis, replacing the standard clear or amber-accented OE units with a darker, more aggressive tinted finish. Constructed from high-grade PC (polycarbonate) and ABS plastic, the housings are impact-resistant, UV-stable, and built to endure the same conditions your Sport was designed to handle. The smoked lens filter softens the rear lighting cluster into a cohesive, blacked-out aesthetic that sits perfectly alongside factory Sport Black packs or any custom build. Unlike generic aftermarket options, these assemblies are engineered as complete drop-in replacements. All mounting points, wiring connectors, and bulb positions mirror the factory specification — meaning no cutting, no splicing, and no guesswork. Whether you're refreshing a tired rear end or building toward a stealth-spec look, these lamps deliver a measurable visual improvement from the moment they're fitted. What's Included 🔴 Left Rear Lamp Assembly Driver-side, smoked finish, complete unit 🔴 Right Rear Lamp Assembly Passenger-side, smoked finish, complete unit 🔌 OE-Match Wiring Connectors Direct plug-in, no modification required 🔧 Mounting Hardware Factory-spec fixings included 📄 Fitting Guide Step-by-step installation reference Product Highlights Smoked tinted lens finish for a stealth, blacked-out rear aesthetic Complete left and right assembly — sold as a pair PC + ABS construction for impact resistance and long-term durability UV-stabilised housing prevents yellowing and discolouration over time Direct OE replacement — no cutting, drilling, or wiring modification Factory-matched mounting points for a flush, rattle-free fit Compatible with 12V standard bulb configuration CCC externally tested and certified for quality assurance Covers all L320 production years including pre- and post-facelift variants Lightweight at approximately 6kg per pair — no structural load concerns Compatibility Vehicle Model Code Year Range Trim Fitment Range Rover Sport L320 2005–2009 (Pre-Facelift) S, SE, HSE, Supercharged Direct Fit Range Rover Sport L320 2009–2013 (Facelift) S, SE, HSE, Autobiography, GT Direct Fit Range Rover Sport L494 2013–2020 All Trims Not Compatible Range Rover Sport L461 2022–2026 All Trims Not Compatible Range Rover Vogue L322 / L405 All Years All Trims Not Compatible Defender L663 2020–2026 All Trims Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  Tools Required: T20 Torx, Trim Removal Tool Open the tailgate fully and locate the access panel inside the boot lining adjacent to each rear lamp cluster. Remove the trim clips or fasteners to expose the lamp housing bolts. Using a T20 Torx driver, remove the three to four retaining bolts securing the lamp assembly to the body. Support the unit from the outside to prevent it dropping. Carefully pull the lamp assembly away from the bodywork. Disconnect the wiring loom connector by pressing the release tab and pulling firmly — do not tug the wiring itself. Unbox the new smoked lamp assembly. Confirm the unit matches orientation (left or right) before proceeding. Connect the wiring loom connector to the new unit until you hear it click into place. Align the new lamp assembly with the mounting holes and hand-tighten the retaining bolts before torquing to factory specification. Ensure the gasket seats flush against the bodywork to prevent water ingress. Refit the boot lining trim panel, then test all functions — stop lights, indicators, reverse, and fog — before closing the tailgate. Repeat the process on the opposite side. ⚠ Important: Smoked lamp lenses reduce light transmission relative to clear OE units. Always verify that your brake, indicator, and fog light functions remain visible and compliant with local road lighting regulations before driving on public roads. If in any doubt, consult a qualified auto-electrician or vehicle lighting specialist. Upgrade Your L320 Sport Today The smoked rear lamp upgrade is one of the most impactful and cost-effective changes you can make to the rear of a Range Rover Sport L320. Order today with worldwide DHL, FedEx, UPS, or TNT shipping — and enjoy complete peace of mind with our 30-day money-back guarantee. Shop Range Rover Sport Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔁 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious · Defender TD5 / TD4 · Air Intake Snorkel Kit Air Filter for Land Rover Defender TD5 & TD4 Direct intake airflow from outside the vehicle, protecting your engine from dust, water and debris in extreme terrain. Defender TD5 1999–2017 Defender TD4 2007–2017 Right-side fitment LLDPE construction CE certified Overview Built for the serious Defender owner, this snorkel kit transforms how your TD5 or TD4 breathes during off-road work, water crossings, and high-dust environments. Whether you're tackling desert tracks or crossing shallow fords, a proper snorkel intake positions your engine's air source higher and further from ground-level contamination—the factory air path simply cannot compete. This system draws clean, cooler air from roof height, which also improves throttle response and reduces engine strain in hot climates. The sealed intake design prevents water ingestion during water crossings and eliminates the dust clouds kicked up by your own wheels. For any Defender used beyond tarmac, it's essential equipment. Manufactured from durable LLDPE (linear low-density polyethylene) and engineered specifically for the TD5 turbodiesel and TD4.2-litre engines, installation is straightforward and requires no engine modifications. CE certified and backed by Victorious' 30-day guarantee. What's Included 🔧 Snorkel Tube Assembly Rigid LLDPE intake runner with bonded joints ⭕ Air Filter Head Sealed intake with velocity damper 🔗 Mounting Brackets & Hardware Stainless fasteners, right-side fitment 📋 Installation Guide Step-by-step fitment instructions Product Highlights Roof-mounted intake draws air above dust and water spray Cooler air improves throttle response and engine efficiency Sealed design prevents water ingestion in shallow crossings LLDPE construction resists UV, heat, and impact damage Eliminates choking effects of standard dashboard intake Right-side fitment (passenger side) for clean installation No engine modifications required CE certified engineering and safety tested Reduces hydro-lock risk in wet terrain Improves fuel economy in dusty, high-heat environments Compatibility Model Engine Year Range Fit Status Defender 110 / 90 TD5 2.5L Turbo Diesel (5-cyl) 1999–2017 Direct Fit Defender 110 / 90 TD4 2.1L / 2.4L Diesel (4-cyl) 2007–2017 Direct Fit Defender TDi, 300Tdi (pre-1999) 2.5L Naturally Aspirated 1990–1998 Not Compatible Defender PUMA / P400 (2020+) 2.0L Petrol / Diesel 2020–2026 Not Compatible Installation Difficulty: Intermediate | Time: 2–3 hours Remove interior trim panels and roof lining on the right side (A-pillar and headlining) Drill or cut access hole through roof at mounting point (template provided) Thread snorkel tube through cabin, positioning intake head at roof edge Secure mounting brackets to roof structure using stainless hardware Connect snorkel tube to factory air intake box with provided clamps Seal all entry points with weatherproof sealant (not included) Reinstate trim panels and test for air leaks Important: Ensure all cable runs (electrics, roof lining) are clear before roof drilling. We recommend professional installation if you're unfamiliar with interior trim work. This is a right-side fitment only—left-side placement will interfere with driver visibility and window operation. Ready to Breathe Better Offroad? Equip your Defender TD5 or TD4 with serious intake protection. This snorkel kit is the upgrade every serious off-road Defender owner should have—cleaner air, cooler runs, safer water crossings. Shop Defender Air Intake Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 stars – 12,300+ reviews 🚚 Worldwide shipping – DHL, FedEx, UPS ✅ 30-day guarantee – Money back, no questions 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover, or any official Land Rover distributor. All Land Rover product names and trademarks are the property of Jaguar Land Rover Ltd. Product compatibility is based on standard factory specifications; fitment may vary based on vehicle modifications or non-standard equipment. Always consult your vehicle's manual before installation.

Victorious Automotive · Defender L663 · Exterior Upgrades Gloss Black Raised Air Intake Snorkel – Land Rover Defender L663 (2020+) A high-mounted gloss black snorkel engineered specifically for the Defender L663 — delivering cleaner, cooler air to the engine while reinforcing the Defender's commanding off-road presence. Defender L663 2020–2026 Gloss Black Raised Air Intake Direct Bolt-On UV-Resistant Finish No Drilling Required 90 · 110 · 130 Overview The Land Rover Defender L663 was engineered from the ground up to be a genuine off-road tool — capable, composed, and ready for environments that most vehicles wouldn't dare enter. Yet for owners who venture beyond the tarmac in earnest, raising the air intake point is one of the most meaningful modifications you can make. It keeps dust, water spray, and fine debris away from the engine's intake, particularly during river crossings, muddy trails, or heavily rutted terrain where low-mounted intakes become a liability. This Gloss Black Raised Air Intake Snorkel has been precision-engineered to integrate cleanly with the Defender L663's bodywork. It mounts using existing factory points, meaning no cutting or drilling is required on the majority of vehicles — the fitment is purposeful and flush, not an afterthought. The gloss black finish has been UV-treated to resist fading and surface degradation, making it equally at home on daily-driven urban Defenders as it is on those seeing serious off-road use. Aesthetically, the snorkel pairs naturally with Black Pack trims, aftermarket bumpers, roof rack systems, and side steps — contributing to a cohesive, purposeful build rather than looking out of place. Whether your Defender is a genuine expedition vehicle or a meticulously specified street machine, this upgrade rewards both sides of the coin. What's Included 🌬️ Gloss Black Snorkel Unit Full raised air intake assembly, gloss black finish 🔩 Mounting Hardware Kit All fixings, brackets, and seals included 📄 Installation Guide Step-by-step fitting instructions Product Highlights Precision-engineered fitment for the Defender L663 platform with no structural modifications needed Raises the air intake point significantly above standard, reducing dust and water ingestion off-road Gloss black finish UV-treated for long-term resistance to fading and surface degradation Scratch-resistant exterior coating maintains appearance through regular off-road use Direct bolt-on installation using existing factory mounting locations No drilling required on most Defender 90, 110, and 130 variants Compatible with both petrol and diesel engine configurations Complements Black Pack, aftermarket bumpers, roof racks, and side steps Sealed junctions and weatherproof construction for all-season durability Improved airflow positioning delivers cleaner intake conditions in wet or dusty environments Compatibility Model Variant Year Range Fit Land Rover Defender 90 L663 – All Engines 2020 – 2026 Direct Fit Land Rover Defender 110 L663 – All Engines 2020 – 2026 Direct Fit Land Rover Defender 130 L663 – All Engines 2020 – 2026 Direct Fit Defender L663 – Petrol P300 / P400 / P525 2020 – 2026 Direct Fit Defender L663 – Diesel D200 / D250 / D300 2020 – 2026 Direct Fit Defender L663 – PHEV P400e 2021 – 2026 Direct Fit Defender with Factory Snorkel Any variant Any year Not Compatible Defender L316 (Classic) Pre-2020 Models Pre-2020 Not Compatible Installation Notes Difficulty: Moderate  ·  Estimated Time: 1.5 – 2.5 Hours Confirm your vehicle does not have a factory-fitted snorkel before proceeding. Check around the A-pillar and front wing area on the driver's side. Carefully remove any relevant exterior trim panels or wing liner sections to access the factory mounting points along the A-pillar and front wing. Dry-fit the snorkel assembly against the vehicle to confirm alignment and identify all fixing locations before committing to the final installation. Where required, apply the supplied seals and weatherstripping to ensure a watertight junction between the snorkel body and the vehicle's bodywork. Secure the snorkel using the provided mounting hardware, tightening fixings progressively and evenly to avoid stressing the body panels. Refit all trim panels and liner sections. Inspect all junctions for gaps or misalignment and adjust as needed before taking the vehicle out. ⚠ Note: Professional installation is recommended for best results. While no drilling is required on most variants, some individual build specifications may vary. Always refer to the included installation guide and, if in doubt, consult a qualified automotive technician familiar with Defender L663 bodywork. Tackle Terrain. Elevate the Build. Explore the full range of exterior upgrades for the Defender L663 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Defender L663 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-Day money-back guarantee 🌍 Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes.

Victorious · Toyota Land Cruiser LC300 · Interior Stainless Steel Speaker Cover Upgrade for Toyota Land Cruiser 300 Premium interior protection that combines robust engineering with refined aesthetics for your LC300 cabin. LC300 2021–2024 Stainless Steel Corrosion Resistant No Drill Install Overview The Toyota Land Cruiser 300 is a masterclass in refinement and durability. From its commanding on-road presence to its uncompromising off-road capability, every detail matters. Your interior deserves the same attention to quality that Toyota engineered into the rest of your vehicle. These stainless steel speaker covers are precision-engineered to protect your factory audio system whilst elevating your cabin's visual hierarchy. Constructed from marine-grade, anti-corrosion stainless steel, they're designed to withstand moisture, temperature fluctuations, and the rigours of daily driving—whether that's your commute or your next expedition. Installation is straightforward with self-adhesive backing; no drilling, no modification, no permanent alteration. A set of four covers completes your door speaker zones in minutes, and they remove cleanly if circumstances change. Available in Black or Silver to match your interior palette. What's Included 🛡️ Speaker Covers (×4) Stainless steel, pre-cut for LC300 🧴 Self-Adhesive Backing Clean application, no drilling required 📋 Installation Guide Step-by-step instructions included ✓ Fit Guarantee LC300 2021–2024 models Product Highlights Marine-grade stainless steel resists corrosion in all weather conditions Protects factory speakers from dust, moisture, and road debris Self-adhesive installation—no drilling or permanent modification Available in Black or Silver to complement your interior Precision-engineered for perfect LC300 fit and finish Cleans easily with standard automotive detailing products Removable without adhesive residue or damage to original surfaces Enhances interior visual hierarchy with minimal intervention Maintains factory audio system integrity and performance Perfect complement to other LC300 interior upgrades Compatibility Model Year Range Fitment Toyota Land Cruiser 300 2021–2024 Direct Fit Toyota Land Cruiser 250 2024+ Not Compatible Toyota Land Cruiser 200 2007–2021 Not Compatible Always verify your vehicle's production year and door configuration against our product images before purchase. Contact our team at +44 203 943 9919 if you're uncertain about compatibility. Installation Difficulty Level: Beginner | Time: 15–20 minutes Preparation: Clean the speaker area thoroughly with a microfibre cloth and allow to dry completely. Any dust or debris will compromise adhesion. Position: Remove backing from the first cover and carefully align it over the speaker opening, checking fit and symmetry before pressing. Apply Pressure: Press firmly across the entire surface for 5–10 seconds, working from the centre outward to eliminate air pockets. Repeat: Apply the remaining three covers using the same method. Allow adhesive to cure fully before car washing or driving. Cure Time: Do not expose your vehicle to heavy rain, car washes, or moisture for 48 hours post-installation. ⚠️ Important: Avoid car washing for 48 hours after installation to allow adhesive to achieve maximum bond strength. Clean gently with a microfibre cloth and dry immediately. Complete Your LC300 Interior Premium craftsmanship doesn't stop at the drivetrain. Elevate your cabin with this thoughtful, durable speaker cover upgrade. Available now, backed by our 30-day money-back guarantee. Shop LC300 Upgrades Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars ✓ 12,300+ Reviews 🚚 Worldwide Shipping 📞 +44 203 943 9919 Disclaimer: Victorious Automotive is an independent aftermarket accessories retailer. This product is not affiliated with, endorsed by, or manufactured by Toyota Motor Corporation, Toyota GB, or Jaguar Land Rover Limited. All vehicle names, logos, and trademarks are the property of their respective manufacturers. Product descriptions are for reference only and compatibility should be verified before purchase.