Range Rover Evoque L538 Accessories

Victorious Automotive · Land Rover Discovery 5 & Range Rover · Exterior Trim Carbon Fiber Door Handle Covers for 2017–2021 Land Rover Discovery 5 & Range Rover A precision-fit carbon fiber upgrade that transforms your door handles into a visual focal point — no paint, no professional fitting, no compromise. Discovery 5 L462 Range Rover L405 2017–2021 Real Carbon Fiber 3M Adhesive Fit UV Resistant Set of 4–8 No Drilling Overview The 2017–2021 Land Rover Discovery 5 and Range Rover are vehicles built with a clear design language — commanding, considered, and refined. The door handles, while functional, are one of the few exterior details that benefit most from a well-chosen upgrade. These carbon fiber door handle covers are engineered specifically for that purpose: to close the gap between factory specification and the kind of finish that turns heads at a standstill. Each cover is crafted from genuine carbon fiber with a high-gloss lacquer finish, capturing the distinctive woven texture that carbon fibre enthusiasts expect. Lightweight by nature yet rigid under daily use, the material resists UV degradation, moisture ingress, and the kind of road debris that dulls lesser finishes over time. The result is a component that looks purposeful and performs quietly — exactly how a Land Rover owner prefers it. Fitment is handled via pre-applied 3M automotive-grade adhesive tape, meaning the entire installation process takes place on your driveway without tools, specialists, or risk to your vehicle's paintwork. Whether you're refining a daily driver or building a specification-level Discovery 5, these covers deliver a noticeable visual step-up with minimal effort required. What's Included 🪶 Carbon Fiber Door Handle Covers Set of 4–8 covers depending on configuration; genuine carbon fiber with gloss lacquer 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade 3M tape bonded to each cover for a clean, tool-free installation 📄 Installation Guide Step-by-step instructions for a professional finish from first attempt 🧹 Surface Prep Wipe Included cleaning wipe to degrease door handle surfaces prior to fitting Product Highlights Genuine carbon fiber construction — not ABS with carbon-look wrap High-gloss lacquer protects the weave and adds depth to the finish UV-resistant coating prevents fading, yellowing, or surface degradation Waterproof and resistant to road grime, bird lime, and light impacts Lightweight profile adds no meaningful weight to your door panels No drilling, cutting, or modification to your vehicle required 3M automotive adhesive provides a permanent, weather-proof bond Precision-moulded to follow the exact contour of Discovery 5 handles Compatible with both 4-door and extended configurations as applicable Brand new — supplied in protective packaging, ready to install Compatibility Vehicle Code Year Range Fitment Land Rover Discovery 5 L462 2017–2021 Direct Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2022 Verify Before Purchase Land Rover Discovery 4 L319 2009–2016 Not Compatible Land Rover Discovery 3 L319 2004–2009 Not Compatible Range Rover Evoque L538 / L551 2011–2023 Not Compatible Land Rover Defender L663 2020–2026 Not Compatible Range Rover Sport L461 2022–2026 Not Compatible Range Rover Vogue L460 2022–2026 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 20–30 Minutes  ·  Tools Required: None Park your vehicle in a dry, sheltered environment. A garage or covered driveway is ideal — avoid fitting in direct sunlight or cold temperatures below 10°C as this affects adhesive performance. Thoroughly clean each door handle with the included prep wipe, removing all grease, wax, polish residue, and moisture. Allow the surface to dry completely before proceeding. Dry-fit each carbon fiber cover to its corresponding handle to confirm alignment and coverage. Each cover is shaped to a specific position — take a moment to familiarise yourself before committing. Peel the backing from the 3M adhesive tape on the underside of the first cover. Align the cover carefully to the handle, press firmly from the centre outward, and hold for 30–60 seconds to activate the bond. Repeat for all remaining covers. Do not wash the vehicle or expose the adhesive to water for at least 24 hours following installation to allow full cure. ⚠ Important: Confirm your exact vehicle variant and year of manufacture before ordering. Handle profiles can vary between model years and trim levels. If you are unsure of compatibility, contact our team at +44 203 943 9919 (Mon–Fri, 9am–7pm) before purchase. Upgrade Your Discovery or Range Rover Today Join over 12,300 verified Land Rover and Range Rover owners who trust Victorious Automotive for premium exterior upgrades. Worldwide shipping via DHL, FedEx, UPS, and TNT — backed by our 30-day money-back guarantee. Shop Discovery 5 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars · 12,300+ Verified Reviews 📦 Worldwide Shipping · DHL, FedEx, UPS, TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced on this page are the property of their respective owners and are used solely for the purposes of fitment identification. Product images are representative — minor variations in finish may occur between production batches.

Victorious Automotive · Velar / Evoque / Discovery Sport · Exterior Styling Carbon Fibre Mirror Covers – Range Rover Velar, Evoque & Discovery Sport Achieve the premium SVR carbon look on your Velar, Evoque, or Discovery Sport with precision-cut, high-quality carbon TPU mirror covers — no drilling, no modification required. Carbon TPU SVR Look Velar 2017–2020 Evoque 2016–2020 Discovery Sport 2015–2020 Clip-On Fit No Drilling Two-Piece Set Overview The Range Rover Velar, Evoque, and Discovery Sport are vehicles that reward attention to detail. From their sculpted flanks to their carefully considered proportions, they're designed to be noticed — and the exterior mirror housings are among the most visible styling elements on the vehicle. Yet it's the top-specification SVR and Black Pack models that get the carbon fibre treatment from the factory, leaving many owners of standard-specification cars searching for an accessible way to close that gap. These carbon fibre-effect mirror covers are designed to do exactly that. Precision laser-cut from high-quality carbon TPU, they replicate the genuine carbon weave aesthetic found on Land Rover's highest-trim derivatives. The material delivers excellent resistance to UV fading and weathering, ensuring the finish remains sharp and consistent long after installation. The carbon weave pattern is bold without being overdone — exactly the kind of purposeful detail that complements the character of these vehicles. Installation is intentionally simple. Each cover clips cleanly over your existing mirror housing using the included adhesive tape, with no tools, no drilling, and no permanent modification to the vehicle. The laser-cut precision ensures a flush, factory-quality fit against every contour of the mirror. Whether you're building out a full carbon exterior package or simply looking for one considered upgrade, these covers offer an exceptional result for the effort involved. What's Included 🪞 Left Mirror Cover Carbon TPU, precision laser-cut 🪞 Right Mirror Cover Carbon TPU, precision laser-cut 🔧 Adhesive Tape Pre-cut strips for secure fitment 📄 Fitting Guide Step-by-step installation instructions Product Highlights Precision laser-cut carbon TPU for exact panel alignment Replicates the factory SVR carbon mirror aesthetic Clip-and-adhesive installation — no drilling required Adhesive tape included for a secure, long-lasting bond UV and weather-resistant material for outdoor durability Sold as a complete two-piece set (left and right) Compatible with three popular Land Rover model lines Seamless integration with existing carbon interior packages No permanent modification to original mirror housings Fully reversible — originals remain undamaged beneath Compatibility Vehicle Year Range Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Evoque (L538) 2016 – 2020 Direct Fit Land Rover Discovery Sport 2015 – 2020 Direct Fit Range Rover Evoque (L551) 2019 – present Verify Before Order Range Rover Vogue / Sport L494/L405 All years Not Compatible Land Rover Defender L663 All years Not Compatible Unsure about your specific build year or mirror type? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and we'll confirm fitment before you order. Installation Notes ⏱ Difficulty: Easy  ·  Estimated Time: 20–30 minutes  ·  Tools Required: None Thoroughly clean your existing mirror housing with an isopropyl alcohol wipe and allow to dry completely. Remove any wax, polish, or contaminants from the surface. Test-fit each carbon cover over the mirror housing before applying adhesive, confirming alignment and coverage across all edges. Apply the provided adhesive tape strips to the inner face of each cover, following the contours of the housing. Starting from one edge, press the cover firmly onto the mirror housing, working gradually toward the opposite side to avoid air pockets or misalignment. Apply firm, even pressure across the entire surface for 30–60 seconds to ensure full adhesive contact. Allow a minimum of 1 hour before exposing to rain or a car wash. ⚠ Note: Surface temperature affects adhesive performance. For best results, install in dry conditions above 10°C (50°F). Avoid installation in direct sunlight on very hot days, as this can cause premature adhesive curing before the cover is fully positioned. Complete the Carbon Look These mirror covers pair perfectly with our full range of carbon interior and exterior styling parts for the Velar, Evoque, and Discovery Sport. Browse the full collection for your vehicle or get in touch — our team knows these cars inside out. Shop Velar Accessories Shop Evoque Accessories Shop Discovery Sport Buying two or more items? Use code below for 20% off your order: 22GET20 — 20% Off Any 2 Items ⭐ 4.9/5 from 12,300+ reviews 🔄 30-Day Money-Back Guarantee 🚚 Worldwide Shipping via DHL / FedEx 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle model names, codes, and trademarks referenced are the property of their respective owners and are used for compatibility identification purposes only.

Victorious Automotive · Range Rover Evoque L538 · Exterior Styling Chrome Headlight Eyebrow Eyelid Cover Trim Strip — Range Rover Evoque L538 (2015–2018) Precision-formed stainless steel chrome accent strips that frame your Evoque's headlights and tail lights with a purposeful, factory-refined edge — no drilling, no mess, no compromise. Evoque L538 2015–2018 Stainless Steel Chrome Finish 3M Adhesive 2 PCS / Set ISO9001 Certified No Drilling Required Overview The Range Rover Evoque L538 Convertible and Ember Edition occupy a unique space in Land Rover's lineup — compact enough for city driving, distinctive enough to command attention wherever it goes. Owners of this model know that the details matter enormously, and the lighting surrounds are one of the first areas where considered styling upgrades can make a visible difference. These chrome headlight and tail light eyelid trim strips are crafted from mirror-polished stainless steel and designed to sit flush above the lamp housings, creating a sculpted brow effect that sharpens the Evoque's already angular face. The result is an assertive, purposeful aesthetic that complements the vehicle's original design language without overwhelming it. The stainless construction ensures the chrome finish holds its quality through rain, road wash, and UV exposure — unlike painted or plastic alternatives that fade and bubble over time. Installation requires no modification to your vehicle whatsoever. Each piece arrives pre-fitted with premium 3M automotive-grade adhesive tape, allowing a clean, secure bond directly to the lamp housing surround. Whether you're refining a daily driver or detailing a show vehicle, these strips deliver an immediately noticeable transformation with none of the complication of professional fitting. What's Included 🪞 Chrome Eyelid Trim Strips 2 PCS per set — one per headlight or tail light housing 🔲 Pre-Applied 3M Adhesive Tape Automotive-grade backing pre-fitted to each strip 📋 Installation Guide Step-by-step fitting instructions included Product Highlights Mirror-polished stainless steel construction for lasting chrome brilliance Precision-formed to match the Evoque L538 lamp housing profile exactly Pre-applied 3M automotive adhesive — no tools, no drilling required 2 PCS per set for a symmetrical, complete front or rear fitment ISO9001-certified manufacturing facility — consistent quality assurance Corrosion-resistant material handles rain, wash, and UV exposure reliably Lightweight at 0.35kg — no added stress to lamp housing or bodywork Slim profile (0.3" height) integrates cleanly without looking aftermarket Sharpens the Evoque's distinctive angular headlight design language Exported globally — trusted by Evoque owners across multiple markets Compatibility Vehicle Year Range Variant Fitment Range Rover Evoque L538 2015–2018 Standard / Convertible / Ember Edition Direct Fit Range Rover Evoque L538 2011–2014 All Variants Verify Before Purchase Range Rover Evoque L551 2019–2024 All Variants Not Compatible Range Rover Evoque L538 2015–2018 Variant / Special Build Editions Contact Us First If your Evoque has a modified front end or non-standard lamp cluster, please contact our team before ordering. We're here Mon–Fri 9am–7pm on +44 203 943 9919. Installation Notes 🔧 Difficulty: Easy  ·  ⏱ Time: 20–30 Minutes  ·  🛠 Tools Required: None Clean the surface thoroughly. Using isopropyl alcohol (70% or higher), wipe the headlight surround area where the trim will sit. Ensure no dust, wax, grease, or moisture remains — a clean surface is critical for maximum adhesive performance. Test-fit each strip before bonding. Hold the trim piece against the lamp housing to confirm alignment and positioning. The strip should sit flush along the upper edge of the headlight or tail light unit. Warm the adhesive tape. Using a heat gun or hair dryer, gently warm the 3M adhesive backing on the trim piece. Warming the lamp surround surface at the same time further activates the bond. This step significantly improves long-term adhesion. Peel the 3M backing and bond. Remove the adhesive liner and carefully press the strip into position. Apply firm, even pressure along the full length for 30–60 seconds to ensure full contact. Allow the bond to cure. Do not wash your vehicle, expose it to heavy rain, or apply pressure to the trim for at least 48 hours after fitting to allow the adhesive to fully cure. ⚠ Please Note: These trim strips are not designed for variant or specially modified versions of the Evoque L538. If your vehicle has an aftermarket front bumper, modified lamp housings, or non-standard exterior panels, please contact us before purchasing. What is sent corresponds exactly to the product images — please review all photos carefully before ordering. Complete Your Evoque's Exterior Browse the full Victorious range of accessories designed and curated specifically for the Range Rover Evoque L538 — from exterior accents to interior refinements, all selected to the same standard. Shop Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🔄 30-Day Money-Back Guarantee 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent retailer of aftermarket and styling accessories. This product is not manufactured by, affiliated with, endorsed by, or approved by Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks referenced are the property of their respective owners and are used solely for the purpose of fitment identification.

Victorious Automotive · Range Rover Evoque L538 · Front Grille Front Replacement Grille – Range Rover Evoque L538 (2013–2018) A precision-fit ABS front grille designed specifically for the Range Rover Evoque L538, delivering a sharper, more assertive face with a free emblem included as standard. Evoque L538 2013–2018 ABS Construction Direct Fit Free Grille Emblem CCC Certified Racing Grille Style Worldwide Shipping Overview The Range Rover Evoque L538 occupies a distinctive space in the Land Rover lineup — compact enough for city driving, capable enough for light trail work, and consistently one of the most style-conscious vehicles in its class. Owners who choose the Evoque do so with an eye for design, and the front grille is one of the most visible elements that defines its character from the moment it comes into view. This replacement front grille is engineered specifically for the L538-generation Evoque produced between 2013 and 2018. Built from durable ABS plastic with a precision-moulded profile, it slots cleanly into the factory aperture without the need for cutting, drilling, or modification. The racing grille aesthetic gives the front end a more purposeful, performance-inspired appearance while maintaining the proportional balance the Evoque is known for. Every order includes a complimentary grille emblem, so you're not left hunting for the finishing touch once the fitment is complete. Whether you're refreshing a front end that's taken road damage or simply upgrading the factory look, this grille delivers a clean, confident result that's entirely at home on a premium-spec Evoque. What's Included 🔲 Front Grille Assembly ABS moulded, racing grille style, L538-specific profile 🔰 Grille Emblem Included free with every order — ready to fit 📦 Protective Packaging Secured for safe international transit via DHL / FedEx 📋 Fitment Guidance General installation reference included Product Highlights Designed exclusively for the Range Rover Evoque L538 (2013–2018) High-grade ABS plastic construction — lightweight and impact resistant Racing grille aesthetic for a more aggressive front-end stance Direct OEM aperture fit — no cutting or drilling required Complimentary grille emblem included with every order CCC certified for quality and safety assurance Dimensions: 100cm (L) × 40cm (W) × 17cm (H) — factory-matched sizing Shipping weight: 4kg — robust build without excess bulk Compatible with all trim levels across the 2013–2018 Evoque range Worldwide shipping via DHL, FedEx, UPS and TNT Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L538 2012 Direct Fit Range Rover Evoque L551 (2019–Present) 2019+ Not Compatible Range Rover Vogue L405 L405 2013–2020 Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Land Rover Discovery Sport L550 2015+ Not Compatible Not sure about your exact model year or build spec? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm compatibility before you order. Installation Notes Difficulty: Moderate  ·  Estimated Time: 45–90 minutes  ·  Tools Required: Trim removal tools, screwdrivers, fastener clips Ensure the vehicle is parked on a level surface with the ignition off. Open the bonnet and secure it safely before beginning work. Using a trim removal tool, carefully disengage the factory grille from its mounting clips along the top edge, working from the centre outward to avoid cracking the surround. Unclip the lower retaining tabs and any fasteners connecting the grille to the bumper assembly. Note the position of each fastener for reassembly reference. Gently disconnect any wiring harness attached to the factory badge or any ambient sensors situated within the grille opening, if applicable to your trim level. Remove the OEM grille assembly and set aside. Clean the mounting aperture before proceeding. Offer up the new grille to confirm alignment across all mounting points before committing to fitment. Seat the replacement grille firmly into the aperture, re-engaging all clips and fasteners in reverse order. Apply even pressure across the full width to ensure flush, rattle-free seating. Fit the included emblem centrally to the grille. Step back and check panel alignment before closing the bonnet. ⚠ Note: If your Evoque is equipped with front parking sensors or a front-mounted camera integrated into the grille surround, take care not to stress or disconnect any cabling during removal. If in doubt, consult a qualified automotive technician to complete the installation. Complete the Evoque L538 Look Browse the full Victorious range of Range Rover Evoque accessories — from exterior styling to interior protection — all selected and curated for the L538 generation. Shop All Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🔄 30-day money-back guarantee ✈️ Worldwide shipping via DHL, FedEx, UPS & TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle specification prior to purchase.

Victorious Automotive · Range Rover · Deployable Side Steps Deployable Electric Side Steps for Range Rover Vogue, Sport, Velar & Evoque — 2013 to 2021 Motorised aluminium running boards that automatically deploy on door open and retract flush to the sill — combining effortless entry with a cleaner, more aggressive stance. L405 · L494 · Velar · L538 / L551 2013–2021 Aluminium Alloy Auto-Deploy 800 kg Load Rated ISO9001 Certified Direct Fit Part: Star War-008 Overview The Range Rover family — from the full-size Vogue L405 to the Sport L494, Velar, and Evoque — sits high on purpose. That ride height is part of what makes these vehicles so commanding on road and off, but it can make daily boarding less than graceful for passengers. Factory side steps were never offered across most of these generations, and static aftermarket boards compromise the clean sill lines that define these designs. These deployable electric side steps solve both problems. Triggered by the door latch signal, they extend automatically when any door opens and retract tight to the undercarriage the moment the door closes — completely hidden from view when not in use. The result is a step that appears exactly when it's needed and disappears entirely when it isn't, maintaining the original profile of the vehicle without compromise. Built from extruded aluminium alloy with anti-corrosion stainless steel plating and a non-slip tread surface, these steps are engineered to the same durability standards expected of the vehicles they serve. With an 800 kg load rating, a robust motor assembly, and certification to ISO9001 and TS16949, this is not an accessory built to the lowest acceptable specification — it's one built to last the life of the vehicle. What's Included ⚙️ Motor Assembly Dual motor unit with deploy/retract mechanism 🪜 Side Step Boards (Pair) Anti-slip aluminium tread surface, left & right 🔩 Metal Support Brackets Heavy-gauge mounting arms for rigid fitment 🔌 Electric Wiring Loom Pre-terminated harness for door trigger integration 🛠️ Fixings & Accessories All hardware required for complete installation Product Highlights Auto-deploy triggered by door open signal — no switches or manual effort required Retracts flush to the underside of the sill when doors are closed, preserving the vehicle's stance Extruded aluminium alloy construction — lightweight yet rigid under load Anti-corrosion stainless steel plating for long-term protection against road salt and moisture Rated to 800 kg static load — comfortably supports occupants of any size Anti-vibration design prevents rattles during driving over rough terrain Non-slip tread surface provides secure footing in wet or muddy conditions Soft-deploy motor reduces mechanical noise and extends component life Custom-designed brackets for each specific vehicle model — no cutting or fabrication required ISO9001 & TS16949 certified — manufactured to automotive-grade quality standards Compatibility Model Code Years Fit Range Rover Vogue L405 2013–2021 Direct Fit Range Rover Sport L494 2013–2021 Direct Fit Range Rover Velar L560 2018–2021 Direct Fit Range Rover Evoque L538 2013–2018 Direct Fit Range Rover Evoque L551 2019–2021 Direct Fit Range Rover Vogue L460 2022–2026 Not This Listing Range Rover Sport L461 2022–2026 Not This Listing Defender L663 2020–2026 Not Compatible Specifications Specification Detail Material Aluminium Alloy + Stainless Steel + ABS Part Number Star War – 008 Position Both sides of vehicle (pair) Unit Weight 26–28 kg (full set) Load Rating 800 kg Fitment Type Custom bracket, vehicle-specific direct fit Certification ISO9001 & TS16949 Trigger Method Door open / close electrical signal Installation Notes Difficulty: Intermediate  ·  Estimated Time: 3–5 Hours  ·  Two People Recommended Safely raise and support the vehicle on axle stands. Do not work under a vehicle supported only by a jack. Remove any existing sill trim or protective covers to expose the mounting points beneath the door sills. Trial-fit the metal support brackets to confirm alignment with factory mounting locations before final torquing. Mount the motor assembly to the bracket arms, ensuring the step board travel path is clear of obstructions. Route the wiring loom through the vehicle's undercarriage, keeping it clear of exhaust and moving components. Secure with supplied cable ties. Connect the wiring loom to the door trigger signal — typically tapped from the door latch switch or interior light circuit. Consult wiring diagrams for your specific model year. Power on the vehicle and test deploy/retract cycles through all doors before lowering the vehicle. Refit sill trim and conduct a final visual inspection for clearance and secure fitment. ⚠ Note: Professional installation by a qualified automotive electrician or 4x4 specialist is strongly recommended. Incorrect wiring connections may trigger fault codes or affect door module functionality. Always disconnect the battery negative terminal before working on electrical circuits. Upgrade Your Range Rover — The Right Way At Victorious Automotive, every product we stock is selected specifically for Land Rover and Range Rover owners who refuse to compromise. These deployable steps are one of the most functional upgrades you can make — and one of the most satisfying to live with every day. Shop Range Rover Vogue Accessories Shop Range Rover Sport Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩️ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used for fitment identification purposes only. Always verify compatibility with your specific vehicle build before purchasing.

Victorious Automotive · Range Rover Evoque L538 · Exterior Trim Range Rover Evoque Side Air Vent Outlet Cover Trim — Gloss Black / Matte Chrome (2012–2017) A direct-fit, adhesive-backed side vent cover trim for the Evoque L538 that elevates the exterior finish with bold contrast — available in Gloss Black or Matte Chrome. Evoque L538 2012–2017 ABS Plastic Gloss Black Matte Chrome 3M Adhesive Set of 2 No Drilling Exterior Trim Overview The Range Rover Evoque L538 is one of Land Rover's most design-forward vehicles — a compact luxury SUV that made an immediate statement when it arrived in 2011. Its angular bodywork, raked roofline, and strong character lines were never intended to blend in. Yet as Evoque models age, the original exterior trim pieces can lose their visual impact — fading, yellowing, or simply failing to reflect the level of finish their owners expect. These side air vent outlet cover trims are designed specifically for the 2012–2017 Evoque L538, covering the decorative side vents located along the front wings. Whether you're refreshing a tired original finish or adding a sharper contrast against your body colour, these covers offer two confident options: a high-gloss black for a blacked-out, sport-influenced aesthetic, or a matte chrome for a cooler, contemporary metallic look that complements both light and dark paint tones. Manufactured from high-grade ABS plastic with a robust surface finish, these trims are engineered to resist UV exposure, moisture ingress, and everyday wear. The pre-applied 3M automotive-grade adhesive tape on the reverse ensures a clean, flush bond to the factory vent housing — no drilling, no bodywork modification, and no professional fitting required. For Evoque owners who take pride in the details, this is one of the most cost-effective ways to refresh the exterior character of an already striking vehicle. What's Included 🔲 Side Vent Cover Trim × 2 Left and right pieces supplied as a matched pair 🔴 Pre-Applied 3M Tape Automotive-grade adhesive already fitted to reverse 📐 Direct-Fit Profile Moulded to match OEM vent geometry precisely 🎨 Finish Choice Available in Gloss Black or Matte Chrome Product Highlights Precision-moulded ABS plastic for a consistent, high-quality surface finish Available in Gloss Black and Matte Chrome to suit different exterior colour schemes Supplied as a set of 2 — both left and right covers included Pre-applied 3M automotive adhesive tape for a clean, no-drill installation Designed and profiled specifically for the Evoque L538 2012–2017 vent housing UV-resistant finish helps prevent fading or dulling over time Flush-fit design that looks factory-fitted once applied No professional fitting required — achievable at home in minutes Lightweight construction adds no meaningful weight to the bodywork Ideal for exterior refresh, personalisation, or replacing discoloured OEM trim Compatibility Vehicle Code Years Fit Range Rover Evoque L538 2012–2017 Direct Fit Range Rover Evoque (Facelift) L538 2016–2019 Verify Before Order Range Rover Evoque L551 2019–2025 Not Compatible Range Rover Sport L494 2013–2022 Not Compatible Land Rover Discovery Sport L550 2015–2024 Not Compatible Range Rover Velar L560 2018–2022 Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 15–20 minutes  ·  Tools Required: None Thoroughly clean both side vent surfaces using an isopropyl alcohol wipe or equivalent degreaser. Remove any wax, polish residue, or road grime to ensure a strong adhesive bond. Allow the surface to dry completely. In cold conditions (below 10°C), gently warm the vent area with a heat gun or hair dryer — this improves 3M tape adhesion significantly. Dry-fit each cover trim to the vent without removing the tape backing. Confirm alignment and check that the profile sits flush against the vent housing on all edges. Peel the protective backing from the 3M tape. Carefully align the trim cover to the vent opening, pressing firmly from the centre outward to avoid trapping air bubbles beneath the panel. Apply firm, even pressure across the full surface for 30–60 seconds. For best results, avoid washing the vehicle for 24–48 hours to allow the adhesive to fully cure. ⚠ Note: If your Evoque is a 2016–2017 model, please verify the vent housing design before ordering. Late L538 facelift models may have a slightly revised vent profile. If in doubt, contact us at +44 203 943 9919 and our team will confirm compatibility. Complete the Evoque's Exterior These vent covers are just one part of a full exterior transformation. Browse our dedicated Range Rover Evoque L538 collection for bonnet vents, mirror caps, grille surrounds, door handle covers, and more — all designed to the same standard of fit and finish. Shop Evoque L538 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Jaguar Land Rover (JLR), Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used solely for fitment identification purposes and remain the property of their respective owners.

Z-ART · Range Rover Evoque L538 · Front Grille Carbon Fibre Front Grille for Range Rover Evoque L538 (2012–2016) A direct-fit, race-inspired carbon fibre front grille that transforms the face of the Evoque with a sharper, more aggressive presence — built to last and precision-matched to the 2012–2016 generation. Range Rover Evoque L538 2012–2016 Carbon Fibre Racing Grille Body Kit Direct Fit UV Resistant 100% Brand New Z-ART Overview The Range Rover Evoque L538 already cuts a distinctive silhouette, but for owners who demand something more purposeful from the front end, the standard grille can feel understated. Whether you're running the original 2.0 Si4 petrol or the 2.2 TD4 diesel, the Evoque's nose is its calling card — and this carbon fibre front grille is designed to make it count. Crafted by Z-ART from high-grade carbon fibre composite, this racing-style front grille delivers genuine material authenticity alongside visual drama. The characteristic woven carbon weave pattern reads clearly at road speed, signalling a level of finish typically reserved for the motorsport paddock. Resistant to UV degradation, water, road salt, mild acids, oils and grease, it's built to hold its appearance through all-season use — not just summer show events. Every unit is gel-coated and individually inspected before despatch, ensuring the surface quality matches the quality of the underlying material. For Evoque owners who take pride in their vehicle's detail, this is the front-end upgrade that rewards closer inspection every time. What's Included 🔲 Carbon Fibre Front Grille Full replacement grille unit, ready to install 🔩 Mounting Hardware OEM-compatible fixings for secure installation 📋 Installation Guide Step-by-step reference included 🛡️ Protective Packaging Foam-lined secure outer packaging Product Highlights Genuine carbon fibre composite construction with visible 2×2 twill weave Direct replacement fit — engineered specifically for Evoque L538 2012–2016 Lightweight material reduces front-end mass versus OEM plastic unit Gel-coated finish for a high-gloss, showroom-ready surface appearance Resistant to UV, water, road salt, grease, oil and mild acid exposure 100% brand new — not reconditioned or refurbished Race-inspired design with aggressive aperture styling Individually inspected and quality-checked before shipping No drilling or permanent modifications required for installation CE certified — meets external testing and quality standards Compatibility Vehicle Generation / Code Year Range Fitment Range Rover Evoque L538 (1st Gen) 2012–2016 Direct Fit Range Rover Evoque L538 (Facelift) 2016–2018 Verify Before Order Range Rover Evoque L551 (2nd Gen) 2019–Present Not Compatible Range Rover Sport L494 2013–2020 Not Compatible Range Rover Vogue L405 2013–2020 Not Compatible If your Evoque falls within the 2016 facelift window, please contact us on +44 203 943 9919 (Mon–Fri, 9am–7pm) before ordering to confirm compatibility with your specific VIN. Installation Notes Difficulty: Beginner–Intermediate  ·  Estimated Time: 45–90 Minutes  ·  Tools Required: Trim removal tools, screwdriver set Ensure the vehicle is parked on a flat surface with the engine off and fully cooled before beginning work. Using trim removal tools, carefully disengage the front bumper clips and release the upper grille surround from the lower bumper assembly. Locate and remove all OEM grille retaining screws or push-pin fasteners — typically found along the top edge and lower mounting points. With a second pair of hands, gently pull the factory grille forward and away from the bumper opening, disconnecting any ambient sensor or camera wiring harness clips if present. Offer up the new carbon fibre grille into the aperture and confirm the mounting points align correctly before pressing into position. Reattach all mounting hardware, reconnect any wiring harnesses, and press the surround back into place until all clips seat firmly. Step back and visually inspect alignment from 3–4 metres. Minor adjustments can be made before final tightening. ⚠ Note: If your Evoque is fitted with a front-facing camera or parking sensors integrated into the grille area, ensure all connectors are fully reseated before driving. We recommend a professional installation if you are not confident working around front bumper assemblies. Victorious Automotive accepts no liability for damage arising from improper installation. Upgrade Your Evoque Today Browse our full Range Rover Evoque L538 accessory collection for interior, exterior and protection upgrades — all curated specifically for your generation of Evoque. Shop Evoque L538 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 Stars — 12,300+ Verified Reviews 🚚 Worldwide Shipping — DHL, FedEx, UPS, TNT ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, affiliated with, endorsed by, or associated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle model names, codes and trademarks referenced are used solely for fitment identification purposes. Z-ART is the manufacturer of this product. Always verify compatibility with your specific vehicle before installation.

Victorious Automotive · Range Rover Evoque · Exterior Trim Exterior Hood Air Vent Outlet Wing Trim for Land Rover Range Rover Evoque (2012–2018) Protect and elevate your Evoque's bonnet air vents with a precision-fit ABS chrome trim pair that adds a factory-finished, upscale aesthetic in minutes — no tools required. Range Rover Evoque L538 2012–2018 ABS Chrome Plastic Self-Adhesive Fit 1 Pair – 2 Pieces Black & Silver / All Black CCC Certified Exterior Trim Overview The Range Rover Evoque L538 is a vehicle that wears its design credentials proudly — compact yet assertive, every exterior detail contributes to the overall character of the car. The hood air vent outlets on the Evoque's bonnet are a defining design element, but over time, exposure to UV, road debris, and everyday wear can leave them looking scuffed, discoloured, or simply underwhelming against an otherwise well-maintained exterior. These Hood Air Vent Outlet Wing Trims are purpose-designed to sit cleanly over the existing vent apertures, providing a layer of protective coverage while simultaneously upgrading the visual presence of the bonnet. Crafted from high-grade ABS plastic with a chrome finish, the trims deliver a polished, premium look that complements the Evoque's signature styling without looking aftermarket or out of place. The self-adhesive mounting system means installation is genuinely straightforward — no drilling, no brackets, no risk of damaging your paintwork. Whether you choose the dual-tone Black & Silver finish for a refined contrast effect, or the all-Black option for a stealthier, more understated look, both variants are built to last through British weather and beyond. What's Included 🔲 Hood Air Vent Wing Trims 1 Pair (2 pieces) — left & right matched set 🔧 Pre-Applied Adhesive Tape 3M-style self-adhesive backing pre-fitted to each trim 📐 Fitment: Left & Right Mirror-matched pair for symmetrical installation Product Highlights Precision-engineered to match the Evoque L538 bonnet vent profile exactly High-grade ABS plastic — lightweight, impact-resistant, and rust-proof Chrome finish adds a factory-luxury aesthetic to the bonnet vents Shields vent surfaces from scratches, chips, and environmental grime Self-adhesive backing for a clean, tool-free installation No drilling, cutting, or modification to your vehicle required Available in Black & Silver or all-Black to suit your colour scheme UV-resistant finish — won't fade or discolour in direct sunlight CCC externally tested and certified for quality assurance Compatible across a wide range of Land Rover models and year spans Compatibility Vehicle Years Fitment Range Rover Evoque L538 2012–2018 Direct Fit Range Rover Vogue L405 2013–2018 Direct Fit Range Rover Sport L494 2014–2018 Direct Fit Land Rover Discovery 4 2010–2016 Direct Fit Land Rover Freelander 2 2007–2014 Direct Fit Range Rover Evoque L551 (2nd Gen) 2019–2025 Not Compatible Range Rover Sport L461 (3rd Gen) 2022–2026 Not Compatible Range Rover Vogue L460 (5th Gen) 2022–2026 Not Compatible Defender L663 2020–2026 Not Compatible Not sure if this fits your specific build? Call us on +44 203 943 9919 (Mon–Fri, 9am–7pm) and our team will confirm fitment before you order. Installation Notes 🛠 Difficulty: Easy  ·  ⏱ Estimated Time: 15–20 Minutes  ·  🔩 Tools Required: None Clean the surface: Thoroughly clean the bonnet vent area using an isopropyl alcohol wipe or panel wipe solution. Remove all grease, wax, and residue, then allow to dry completely for a minimum of 5 minutes. Test fit before committing: Hold each trim piece in position over the corresponding vent outlet without removing the adhesive backing. Confirm alignment and orientation before proceeding. Warm the adhesive: In cooler weather, gently warm the adhesive backing with a heat gun or hairdryer on a low setting for 10–15 seconds. This improves initial bond strength significantly. Peel and position: Remove the adhesive backing from one trim piece, carefully align it to the vent outlet, and press firmly into place starting from the centre outward to eliminate air pockets. Apply firm pressure: Hold firm, even pressure across the entire trim surface for at least 30 seconds per piece to ensure full adhesive contact. Repeat for the second trim: Follow the same process for the opposite side, ensuring symmetrical placement. Cure time: Allow 24 hours before washing the vehicle or exposing the trim to heavy rain to allow the adhesive bond to fully cure. ⚠ Note: Do not attempt installation in temperatures below 10°C without pre-warming the adhesive. Cold conditions significantly reduce initial adhesion and may result in the trim lifting at the edges. Ensure the bonnet surface is completely dry before application. Shop by Vehicle Looking for more accessories for your Land Rover or Range Rover? Browse our dedicated vehicle collections below: 🚙 Range Rover Evoque L538 2012–2018 accessories 🚙 Range Rover Evoque L551 2019–2025 accessories 🚙 Range Rover Vogue L405 2013–2020 accessories 🚙 Range Rover Sport L494 2013–2020 accessories 🚙 Land Rover Discovery 4 2010–2016 accessories 🚙 Land Rover Discovery 5 2017–2023 accessories Built for Land Rover Owners Who Don't Compromise At Victorious Automotive, every product we stock is selected to meet the standards your vehicle deserves. Free worldwide shipping, a 30-day money-back guarantee, and 12,300+ verified five-star reviews speak for themselves. Shop All Evoque Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🌍 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔒 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model designations, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Product images are representative; slight variations in finish may occur between production batches.

Victorious Automotive · Range Rover Evoque L551 · Running Boards Side Running Boards for Range Rover Evoque L551 (2020–2022) Precision-moulded aluminium alloy side steps engineered for a direct-fit, no-drill installation on the second-generation Range Rover Evoque — combining structural strength with a clean, factory-integrated look. L551 Evoque 2020 · 2021 · 2022 Aluminium Alloy ABS Body Stainless Steel Brackets No Drilling Required ISO9001 · TS16949 600–800kg Load Rated Direct Fit Overview The second-generation Range Rover Evoque (L551) sits at an elevated ride height that, while commanding on the road, can make entry and exit feel less graceful — particularly for shorter drivers, passengers with mobility considerations, or anyone loading luggage and equipment. These side running boards address that directly, providing a wide, secure step platform that integrates seamlessly with the Evoque's refined body lines. Constructed from ISO9001-certified high-grade aluminium alloy with an ABS step surface and stainless steel mounting brackets, these running boards are built to last in real-world conditions. The stainless steel hardware offers exceptional resistance to heat, acid, salt, and corrosion — essential for a vehicle that spends time on British roads, coastal environments, or anywhere road salt is a concern. The load-bearing structure is rated to withstand 600–800kg of static force, meaning the brackets will outlast the vehicle if properly maintained. Manufactured through a closed-mould production process, every dimension is engineered specifically for the L551 Evoque platform. The fit is precise — no adaptation, no shimming, no compromise. Whether your Evoque is a manual-door or automatic-door variant, the running board sizing is identical, and installation uses your vehicle's existing chassis holes without any drilling whatsoever. What's Included 🔲 Side Running Boards (Pair) Left & right aluminium alloy step boards with ABS anti-slip surface 🔩 Stainless Steel Mounting Brackets Thickened stainless steel stents for maximum structural rigidity 🛠️ Installation Hardware Pack All bolts, washers, and fasteners required for a complete fit 📋 Installation Guide Step-by-step instructions for straightforward self-installation Product Highlights Aluminium alloy body — lightweight yet exceptionally rigid underfoot ABS step surface resists scratches, scuffs, and surface wear over time Stainless steel brackets rated to 600–800kg static load capacity Anti-corrosion stainless hardware — resistant to heat, acid, salt, and moisture Closed-mould production ensures 100% dimensional accuracy for the L551 platform No drilling required — mounts directly to existing factory chassis holes Suitable for both manual and automatic door variants of the Evoque ISO9001 and TS16949 dual-certified manufacturing process Vibration-dampening construction reduces road noise and rattle Factory-integrated aesthetic that complements the Evoque's design language Compatibility Vehicle Code Year Range Fit Range Rover Evoque L551 2020 – 2022 Direct Fit Range Rover Evoque L551 2023+ Verify Before Purchase Range Rover Evoque (First Gen) L538 2011 – 2018 Not Compatible Range Rover Velar L560 2017+ Not Compatible Discovery Sport L550 2015+ Not Compatible Installation Notes 🔧 Difficulty: Easy  |  ⏱ Estimated Time: 45–75 minutes  |  👤 1–2 people recommended Park your Evoque on a flat, level surface and ensure the vehicle is secure before working underneath. Locate the pre-existing mounting holes along the underside of the chassis — no drilling is required at any stage. Attach the stainless steel mounting brackets to the chassis holes using the supplied hardware, ensuring each bracket is seated flush and square. With a second person to assist, align each running board onto the mounted brackets from front to rear. Insert and hand-tighten all fasteners before torquing down to a firm, even finish — do not over-tighten. Inspect all contact points, check for lateral movement, and confirm both boards are level and secure before driving. ⚠ Important: Always verify that the chassis mounting points are clean and free from corrosion before installation. If you are unsure at any stage, we recommend consulting a qualified installer. Do not exceed the rated load capacity of 600–800kg on either step. Complete Your Evoque Browse the full range of premium accessories for the Range Rover Evoque L551 — from exterior styling to interior protection — all designed with the same level of precision and finish quality. Shop All Evoque L551 Accessories Use code 22GET20 for 20% off when you buy any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 🚚 Worldwide shipping via DHL, FedEx, UPS & TNT ↩ 30-day money-back guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. This product is not manufactured by, endorsed by, or affiliated with Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for compatibility identification purposes.

Victorious Automotive · Range Rover Evoque L551 · Headlamp Protection Headlamp Tint Pre-Cut Film for Range Rover Evoque 2020+ (L551) Pre-cut TPU headlamp tint film engineered to the exact lens profile of the 2020+ Range Rover Evoque — delivering smoked or clear protection that installs cleanly, self-heals from minor abrasions, and keeps your headlights looking factory-fresh. Range Rover Evoque L551 2020 – Present Top-Grade TPU Self-Healing Scratch Resistant Blackened & Transparent Pre-Cut Fit Set of 2 Overview The 2020-onwards Range Rover Evoque L551 represents a genuinely refined evolution of Land Rover's most urban, design-led SUV. With its flush Matrix LED headlights and sculpted front end, the Evoque commands attention — but those exposed polycarbonate lenses are vulnerable to stone chips, road debris, UV yellowing, and the kind of fine-surface scratching that accumulates over daily use and progressively dulls that sharp, purposeful look. This pre-cut headlamp tint film is manufactured from high-grade TPU (Thermoplastic Polyurethane) — the same class of material used in professional paint protection film. The film arrives precisely shaped to match the exact headlamp outline of the L551 Evoque, meaning no trimming, no guesswork, and a clean installation that sits edge-to-edge without visible overhang. Available in both a dark smoked blackened finish for an aggressive, contemporary aesthetic, or a clear transparent version for those who simply want invisible protection. The self-healing surface technology means light swirl marks and minor surface abrasions disappear with exposure to heat — keeping the film looking as good as the day it was applied. If you care about the long-term condition of your Evoque, this is one of the simplest and most cost-effective protective upgrades you can make. What's Included 💡 Pre-Cut Headlamp Film 2 pieces — driver & passenger side, L551 profile 🧰 Application Tools Kit Included as complimentary gift with every set 🎨 Choice of Finish Blackened smoked or transparent clear 📋 Installation Guide Step-by-step guidance for a clean, bubble-free fit Product Highlights Pre-cut to exact L551 Evoque headlamp dimensions — no trimming required Top-grade TPU material with genuine self-healing surface technology Available in blackened smoked finish for a stealth aesthetic Available in transparent clear for invisible, unobtrusive protection Scratch and abrasion resistant against stone chips and road debris UV resistant — prevents lens yellowing and surface degradation over time Conforms to the lens contour for a smooth, bubble-free application Does not impair headlamp light output or beam pattern Removable without adhesive residue — non-destructive to original lens 100% brand new — each set packaged and quality-checked before dispatch Compatibility Vehicle Years Fitment Range Rover Evoque L551 2020 – Present Direct Fit Range Rover Evoque L538 2015 – 2019 Direct Fit Land Rover Discovery Sport 2016 – Present Direct Fit Range Rover Velar 2017 – 2020 Direct Fit Range Rover Vogue L405 2013 – 2017 Direct Fit Range Rover Vogue L405 2018 – Present Direct Fit Range Rover Sport L494 2014 – 2017 Direct Fit Range Rover Sport L494 2018 – Present Direct Fit Range Rover Sport L461 2022 – Present Check Variant Defender L663 2020 – Present Not Compatible Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 minutes  ·  Tools: Included Thoroughly clean both headlamp lenses with a mild soapy solution and allow to dry completely. Remove any wax, grease, or contaminants from the lens surface for maximum adhesion. Lightly mist the lens surface with a water and soap solution. This allows you to reposition the film during application before the adhesive fully sets. Carefully peel the backing from the pre-cut film and align it to the headlamp lens, starting from one edge and working progressively across the surface. Use the included squeegee tool to smooth the film outward from the centre, pushing out any air pockets or moisture as you go. Use a heat gun or hairdryer on a low setting to gently warm the edges of the film, encouraging it to conform tightly to any curved or contoured areas of the lens. Allow 24–48 hours for the film to fully cure and bond before washing the vehicle or exposing it to heavy rain. Note: Ensure the vehicle is parked in a clean, dust-free environment during installation. Avoid applying in direct sunlight or extreme cold, as both conditions will reduce working time and adhesion quality. The self-healing function activates with heat — minor surface marks will naturally diminish in warm conditions or with brief exposure to warm water. Shop the Full Range Rover Evoque Collection Browse our complete range of precision-fitted accessories for the Range Rover Evoque L551 — from exterior protection to interior upgrades, all selected and quality-checked by our team of Land Rover specialists. Shop Evoque L551 Accessories → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx, UPS & TNT 🔄 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri, 9am–7pm Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are used for fitment identification purposes only and remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L538 · Headlamp Protection Headlamp Tint Pre-Cut Film – Range Rover Evoque 2015–2019 (L538) Precision pre-cut TPU headlamp tint film that shields your Evoque's headlights from stone chips, UV damage, and road debris — available in Blackened or Transparent finish. Range Rover Evoque L538 2015–2019 Top-Grade TPU Self-Healing Scratch Resistant Pre-Cut Fit Blackened & Transparent No-Drill Install Overview The Range Rover Evoque L538 (2015–2019) is a design-led compact SUV that commands attention on both urban streets and open roads. Its slim, swept headlamp clusters are one of its most defining aesthetic details — and one of the first elements to show the cosmetic toll of daily driving. Stone chips, road grit, and UV exposure gradually dull and pit the lens surface, detracting from the Evoque's polished presence. These precision pre-cut headlamp tint films are laser-profiled to follow every contour of the Evoque's headlamp housings exactly — no trimming, no guesswork, and no risk of misaligned edges. Made from top-grade thermoplastic polyurethane (TPU), the film is genuinely self-healing at a molecular level; light surface scratches disappear under warmth, keeping the lens looking factory-fresh for years. Choose Transparent to retain the original headlamp colour and simply add an invisible armour, or opt for Blackened to give your Evoque a sharper, more sinister look without permanently modifying any component. Unlike cheap vinyl alternatives, this TPU film resists yellowing, resists peeling at the edges, and maintains optical clarity so your light output is never compromised. Installation requires no professional tools and leaves no permanent residue — meaning it's fully reversible whenever you choose. It's one of the most impactful yet understated upgrades available for the Evoque L538. What's Included 💡 2× Pre-Cut Headlamp Films Left and right, profiled for Evoque L538 2015–2019 🧰 Application Tool Kit Squeegee and fitting aids included as standard 📋 Installation Guide Step-by-step application instructions 🎨 Choice of Finish Blackened smoke or crystal transparent Product Highlights Precision pre-cut profile for exact fit on Evoque L538 headlamps Top-grade TPU construction — flexible, durable, optically clear Self-healing surface technology repairs light scratches with heat Available in Blackened smoke or Transparent protective finish Protects against stone chips, road debris, dust, and UV rays Fully reversible — removes cleanly with no adhesive residue No trimming required — direct application straight from the pack Does not reduce headlamp light output or beam quality Resistant to yellowing, peeling, and edge lifting over time DIY-friendly installation — no professional fitting required Compatibility Vehicle Year Range Fitment Range Rover Evoque L538 2015–2019 Direct Fit Range Rover Evoque L551 2020–Present Separate SKU Range Rover Velar 2017–2020 Separate SKU Range Rover Vogue L405 2013–2017 Separate SKU Range Rover Vogue L405 2018–Present Separate SKU Range Rover Sport L494 2014–2017 Separate SKU Range Rover Sport L494 2018–Present Separate SKU Land Rover Discovery Sport 2016–Present Separate SKU This listing is pre-cut specifically for the Range Rover Evoque L538 (2015–2019). If your vehicle is listed above with a 'Separate SKU' badge, please browse our full Range Rover Evoque collection or Discovery Sport collection to find the correct fitment. Installation Notes Difficulty: Easy  ·  Estimated Time: 30–45 Minutes  ·  No Tools Required Thoroughly clean the headlamp lens surface with an alcohol-based solution and allow to dry completely. Remove any wax, polish, or silicone residue for best adhesion. Working in a warm, dust-free environment, carefully peel the backing layer from the TPU film — handle by the edges to avoid fingerprint contamination on the adhesive side. Using the included spray solution (or a light mist of soapy water), lightly dampen the headlamp surface to allow the film to be repositioned during application. Align the pre-cut film to the headlamp — the precision cut profile should follow the lens edge exactly. Work from the centre outward. Use the included squeegee to push out any air bubbles and water pockets, working from the centre toward the outer edges in firm, smooth strokes. Use a heat gun or hairdryer on low heat to gently warm the film over curved edges, encouraging the TPU to conform and bond fully. Allow 24–48 hours for the adhesive to cure fully before washing the vehicle or exposing to heavy rain. ⚠ Note: Do not apply in cold temperatures (below 10°C / 50°F) as this reduces film flexibility and may cause lifting at edges. Ensure the headlamp surface is completely dry before beginning. Do not use abrasive cloths during cleaning. Complete Your Evoque's Look Explore the full range of accessories curated specifically for the Range Rover Evoque L538 — from exterior protection to interior upgrades — all hand-selected by Land Rover enthusiasts. Shop Range Rover Evoque L538 → Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, affiliated with, or endorsed by Jaguar Land Rover Limited, Land Rover, or any of their subsidiaries. All vehicle model names and codes are referenced solely for fitment identification purposes. All trademarks remain the property of their respective owners.

Victorious Automotive · Range Rover Evoque L551 · Exterior Styling ABS Black Front Fog Lamp Frame Trim – Range Rover Evoque L551 (2019–2020) A precision-formed ABS fog light surround trim that adds a purposeful, blacked-out finish to the front fascia of the 2019–2020 Range Rover Evoque L551 — no drilling, no fuss. Evoque L551 2019–2020 ABS Plastic Gloss Black Fog Lamp Trim Exterior Styling Adhesive Fit ISO9001 Certified 200g No Drilling Required Overview The Range Rover Evoque L551 — introduced in 2019 — represents Land Rover's most refined interpretation of the compact luxury SUV. Its sculpted front end, with its bold lower fascia and integrated fog lamp housings, is one of the most distinctive design features on the vehicle. Keeping that detailing looking sharp and intentional matters to owners who take pride in every visual aspect of their Evoque. This front fog lamp frame trim is precision-manufactured from high-grade ABS plastic in a deep gloss black finish. Engineered specifically for the 2019–2020 Evoque L551 platform, each piece is contoured to follow the exact profile of the factory fog lamp recess — ensuring a flush, factory-quality appearance that looks like it was always part of the vehicle's design language. Where the standard fog lamp surrounds can appear understated or, over time, show the effects of road grime and UV exposure, this ABS trim overlay introduces a clean, dark contrast that complements both the Evoque's body colour and its wider design intent. The result is a subtly sportier, more defined front end — without modification, body shop visits, or permanent changes to the vehicle. What's Included 🔲 Fog Lamp Frame Trim Set ABS gloss black surround pieces, pre-cut to fit 🔧 Automotive Adhesive Tape Pre-applied 3M-style backing tape for secure fitment 📄 Installation Guide Simple step-by-step fitting instructions included Product Highlights Precision-moulded specifically for the Evoque L551 (2019–2020) front fog lamp recess High-grade ABS plastic construction — durable, lightweight, and UV-resistant Gloss black finish adds a bold, blacked-out contrast to the front fascia Adhesive-backed installation — no drilling, cutting, or permanent modification ISO9001-certified production quality for consistent fit and finish Weighs just 200g — no impact on vehicle aerodynamics or performance 31cm × 15cm × 5cm — engineered to match OEM fog lamp housing dimensions Resistant to road wash, car cleaning products, and everyday weathering Fully reversible — remove cleanly without damage to original paintwork Enhances the Evoque's front-end presence with a more defined, sporty character Compatibility Vehicle Code Years Fitment Range Rover Evoque L551 2019–2020 Direct Fit Range Rover Evoque L538 2011–2018 Not Compatible Range Rover Evoque L551 2021–2024 Verify Before Purchase Range Rover Velar L560 2018–2022 Not Compatible Discovery Sport L550 2015–2022 Not Compatible Installation Notes 🛠 Difficulty: Easy  |  ⏱ Estimated Time: 20–30 Minutes  |  🔩 Tools Required: None Thoroughly clean the fog lamp surround area on your Evoque's front bumper using isopropyl alcohol or a panel wipe — remove all dirt, wax, and grease residue for maximum adhesion. Allow the surface to dry completely. In cold weather, gently warm the bumper surface and the adhesive backing with a heat gun or hairdryer to improve bond strength. Dry-fit each trim piece without removing the adhesive backing to confirm alignment and positioning before committing to placement. Peel back the adhesive tape backing and carefully align the trim piece from one edge, pressing firmly along the full length to avoid air pockets or misalignment. Apply firm, even pressure across the entire trim surface for 30–60 seconds to activate the adhesive bond. Allow 24 hours before washing the vehicle. ⚠ Note: Do not install in temperatures below 5°C (41°F) as this may significantly reduce adhesive performance. Ensure the bumper surface is completely dry and free of silicone-based products prior to fitting. This trim is designed for the 2019–2020 Evoque L551 only — do not attempt to fit to earlier L538 models as the fog lamp housing dimensions differ. Complete Your Evoque's Look Explore the full range of exterior styling accessories for the Range Rover Evoque L551 at Victorious Automotive — trusted by over 12,300 Land Rover and Range Rover owners worldwide. Shop Evoque L551 Accessories Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Worldwide Shipping via DHL, FedEx & UPS ↩ 30-Day Money-Back Guarantee 📞 +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessories retailer. This product is not manufactured by, endorsed by, or affiliated with Land Rover, Jaguar Land Rover Limited (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks are the property of their respective owners and are referenced solely for fitment identification purposes. Always verify compatibility with your specific vehicle configuration before purchase.