Spare Parts

Victorious · Land Rover LR2 · Cooling System Premium Radiator Hose Kit – Land Rover LR2 3.2L Direct-fit expansion tank and engine-to-radiator hose assembly for 2008–2012 Land Rover Freelander LR2. OEM-spec rubber and reinforced PP construction. LR2 L359 2008–2012 3.2L Petrol Rubber/PP Direct Fit OEM Replacement Overview The Land Rover Freelander LR2 (2008–2012) with the 3.2L petrol engine relies on a precise cooling system architecture. Radiator hose failures—whether in the expansion tank feed line, engine discharge, or return path—compromise coolant circulation, risk overheating, and can lead to catastrophic engine damage if left unaddressed. This OEM-spec radiator hose kit delivers factory-correct rubber and PP (polypropylene) construction for all three critical cooling circuits in your LR2. Each hose is engineered to OEM tolerance, thermal specification, and pressure rating, ensuring seamless drop-in replacement without modification or adaptation. Whether you're addressing a split hose, replacing brittle coolant lines after high mileage, or executing preventative maintenance on your LR2, this kit gives you the reliability and fit quality that restores cooling system confidence. What's Included 🔧 LR000933 – Expansion Tank Feed From radiator to expansion reservoir. OEM Gates 02-2133 equivalent. 🔧 LR006165 – Radiator Return Radiator outlet to expansion tank. High-pressure rated, reinforced construction. 🔧 LR019341 – Engine Discharge Engine block to expansion tank. Direct-fit design, OEM thermal rating. ✓ Full Cooling System Coverage All three hoses required for complete LR2 coolant circuit integrity. Product Highlights OEM-spec rubber composition rated for 120°C continuous coolant temperature Reinforced PP fittings resist high-pressure surge and vibration fatigue Direct fit—no cutting, splicing, or adapter sleeves required Covers all three critical LR2 cooling circuits (expansion, return, engine discharge) Factory-equivalent wall thickness and bend geometry Tested against UK and EU cooling system durability standards Compatible with OEM coolant specs (do not mix with cheap aftermarket fluids) Restores factory cooling performance and thermostat calibration Prevents air locks in the expansion tank circuit 12-month quality guarantee backed by Victorious Automotive Compatibility at a Glance Vehicle Engine Years Fit Land Rover Freelander LR2 3.2L Petrol V6 2008–2012 Direct Fit Land Rover Freelander LR2 2.2L Diesel TDv6 2008–2012 Not Compatible Range Rover Sport L320 3.0L / 5.0L 2005–2013 Not Compatible Range Rover Vogue L405 3.0L / 5.0L 2013+ Not Compatible ⚠ Diesel Models: Freelander LR2 diesel engines (2.2L TDv6) use a different hose configuration and coolant routing. This kit is for petrol (3.2L V6) models only. Verify your engine designation on your V5C registration document before ordering. Installation Notes Difficulty: Intermediate | Time: 45–75 minutes Disconnect the battery negative terminal and wait 5 minutes for residual voltage to drain. Allow the engine to cool completely. Do not open the coolant system while hot; risk of severe burns. Position a drain pan beneath the radiator. Open the lower radiator bleed screw and allow coolant to drain into a waste container (do not dump down drains). Locate each hose clamp using the OEM diagram (part numbers correspond to circuit location). Remove clamps using a flat-blade screwdriver or hose clamp tool. Gently twist and pull each hose away from its fitting. Do not force; apply penetrating oil if hoses are seized. Inspect all connection ports for corrosion or debris. If present, flush lightly with clean water and dry thoroughly. Install new hoses in reverse order, starting with the expansion tank feed (LR000933), then radiator return (LR006165), then engine discharge (LR019341). Refit hose clamps snugly—firm but not over-tightened. Over-tightening ruptures reinforced hose walls. Refill the coolant reservoir with the correct OEM specification (Jaguar Land Rover Genuine Coolant or approved equivalent). Do not mix brands. Bleed air from the cooling circuit: Start the engine with the radiator cap loose, run for 2–3 minutes at idle, then top up coolant as bubbles rise and escape. Reinstall the radiator cap and monitor temperature gauge for 10 minutes of road testing at light load. Important: Coolant is highly toxic to animals and humans. Dispose of old coolant through a licensed automotive waste facility. Never pour used coolant down drains or onto soil. Wear nitrile gloves and eye protection when handling hoses and fittings. Ready to Restore Cooling Confidence? Keep your Land Rover LR2 running cool and reliable. This OEM-spec radiator hose kit is your safeguard against overheating, air locks, and cooling system failure. Order now and receive expert support from our technical team. Shop Radiator Hoses Save 22GET20 — use code at checkout for 20% off any 2 items. 4.9 / 5 – 12,300+ verified reviews 30-day money-back guarantee DHL / FedEx – worldwide shipping +44 203 943 9919 – technical support Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Defender, Jaguar Land Rover, or the Tata Group. Product part numbers LR000933, LR006165, and LR019341 are Land Rover OEM references; this product is an aftermarket equivalent manufactured to OEM specification. Installation of any aftermarket cooling system component may affect your vehicle warranty. Consult your Land Rover dealer before proceeding. Victorious Automotive is a specialist retailer, not an official Land Rover retailer.

```html Victorious Automotive · Range Rover / Discovery · Cooling System 3.0L Engine Block to Heater Water Hose – Range Rover & Discovery OEM-specification coolant hose for 3.0 and 5.0L petrol engines. Direct-fit replacement for Range Rover L405, Sport L494, and Discovery 5. L405 / L494 / L462 2013–2020 Range Rover 2014–2020 Range Rover Sport 2017+ Discovery Cooling System OEM-Spec Rubber Overview The engine block to heater inlet hose is a critical component in your Range Rover L405, Range Rover Sport L494, or Land Rover Discovery 5's cooling system. This hose carries hot coolant from the engine block directly to the heater matrix—essential for cabin heating and engine thermal management. Aftermarket coolant hoses deteriorate through thermal cycling, age, and pressure. A failed or leaking hose can lead to rapid coolant loss, engine overheating, and potential head gasket damage. This premium replacement is engineered to OEM specifications and carries a full 12-month warranty. Compatible with 3.0L SC V6, 5.0L SC V8, and 5.0L petrol engines across all three model lines. Fits two design variants (Part Numbers LR034616 and LR034624-A rubber section). Installation requires basic mechanical knowledge and takes approximately 1–2 hours depending on engine bay layout. What's Included 🔧 Engine Block to Heater Inlet Hose (Type A) Complete hose assembly with fittings 🔧 Heater Water Hose (Type B) Rubber hose section from LR034624 assembly 📋 Part Number Verification Matches LR034616 or LR034624-A 🛡️ 12-Month Warranty Full coverage against manufacturing defects Product Highlights OEM-specification rubber compound for thermal resilience Manufactured to original equipment tolerances Perfect fitment with existing engine block and heater core ports Stable performance under extreme temperature cycling Aftermarket quality at fraction of dealer cost Easy installation with standard hand tools Dual-variant support (LR034616 & LR034624-A) No special fluids or coolant additives required Direct replacement—no modifications needed Reliable long-term durability and low failure rate Compatibility Chart Model Year Range Engine Part Number Fit Status Range Rover Vogue (L405) 2013–2020 3.0L SC V6 Petrol LR034616 Direct Fit Range Rover Vogue (L405) 2013–2020 5.0L SC V8 Petrol LR034616 Direct Fit Range Rover Vogue (L405) 2013–2020 5.0L Petrol LR034616 Direct Fit Range Rover Sport (L494) 2014–2020 3.0L SC V6 Petrol LR034616 Direct Fit Range Rover Sport (L494) 2014–2020 5.0L SC V8 Petrol LR034616 Direct Fit Land Rover Discovery 5 (L462) 2017+ 3.0L SC V6 Petrol LR034616 Direct Fit Any Model All Years TDV6 / Diesel – Not Compatible Note: Two variants are available. Type A is the complete engine block to heater inlet hose (LR034616). Type B is the rubber hose section from the LR034624 assembly. We will send one variant at random unless otherwise specified. If you require a specific type, please contact us before purchasing. Installation Notes Difficulty Level: Intermediate | Time: 1–2 Hours Disconnect the negative battery terminal and wait 5 minutes for the electrical system to discharge. Allow the engine to cool completely. This job requires access to hot coolant lines; never work on a warm engine. Locate the hose connection points: Engine block outlet (lower front) and heater core inlet (upper firewall area, passenger side). Position a coolant drain pan beneath the hose. Some coolant will spill—expect 0.5–1.0 litre loss. Remove hose clamps using a flathead screwdriver or spring-clamp removal tool. Note clamp positions for reassembly. Gently twist and pull the old hose away from both ports. Do not force—apply steady, even pressure. Inspect the port spigots for cracks or corrosion. If damaged, the component may require replacement. Install the new hose by pushing firmly onto both ports until fully seated. The hose should not spin freely on the spigot. Reinstall hose clamps in their original positions. Tighten firmly but do not over-torque (risk of splitting the rubber). Refill the coolant system through the expansion tank cap. Use Pentosin FrostSchutz (or equivalent OEM-approved coolant) to top up to the cold-fill line. Bleed air from the system by running the engine at idle for 5 minutes with the expansion tank cap removed. Top up as needed. Reinstall the expansion tank cap and reconnect the negative battery terminal. Test for leaks by idling the engine for 10 minutes and inspecting both hose connection points. Stop the engine and recheck after cooling. ⚠️ Important: Never open the coolant expansion tank or disconnect hoses while the engine is hot. Hot coolant under pressure can cause severe burns. Always work on a cold engine. If coolant loss is significant or leaks persist after installation, stop use immediately and seek professional diagnosis. Keep Your Range Rover Running Cool A failed coolant hose is a silent threat to your engine's health. This OEM-specification replacement stops problems before they start. Ships worldwide via DHL, FedEx, or UPS. 30-day money-back guarantee on all parts. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 Stars – 12,300+ Reviews 🚚 Worldwide Shipping – DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 – Mon–Fri 9am–7pm ✓ 30-Day Guarantee – Money Back Disclaimer: Victorious Automotive is an independent specialist in Land Rover and Range Rover accessories. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Ltd., Land Rover (official brand), or any OEM manufacturer. All product descriptions, compatibility information, and technical data are provided for reference only. Customers are responsible for verifying fitment with their specific vehicle using the VIN or part number. Installation should only be performed by qualified technicians. We accept no liability for incorrect installation, vehicle damage, or injury resulting from misuse or improper fitment. Warranty covers manufacturing defects only—not labour, installation, or consequential damage. ```

```html Victorious · Cooling System · Range Rover / Discovery Water Outlet Tube & Thermostat Hose – Discovery 4, Sport, Velar, Defender OEM-spec upper and lower water outlet tubes engineered for 3.0L V6 and 5.0L V8 petrol engines with complete cooling system integration. LR090630 / LR092992 2014–2021 3.0L V6 / 5.0L V8 Supercharged Compatible OEM Direct Fit Why This Matters The water outlet tube is the critical connection between your engine block and cooling system. When it fails—whether through age, thermal stress, or coolant degradation—coolant seeps into the engine bay, temperature control fails, and you're looking at a roadside breakdown or worse: engine damage. Land Rover's original LR090630 (upper) and LR092992 (lower) tubes are engineered specifically for the thermal cycling demands of Range Rover Sport, Discovery 4, Velar, and New Defender powertrains. Factory quality, drop-in fitment, 12-month warranty. This listing includes configuration options: upper only, lower only, or complete upper + lower assembly. Choose based on your diagnostic or preventative maintenance needs. Fits 3.0L V6, 5.0L V8, and supercharged variants without modification. What's Included 🔧 Water Outlet Tube Upper LR090630 or Lower LR092992 (select option) 📋 OEM Documentation Part number verification & fitment guide 🛡️ 12-Month Warranty Full replacement guarantee on defects ✅ Quality Certification Partsmost brand – OEM equivalent Product Highlights OEM LR050935 equivalent (combines both upper & lower assemblies) Fits Discovery 4 (LR4), Range Rover Sport (2014+), Velar (2017+) Compatible with New Defender 2020+, Jaguar F-Pace and XE models 3.0L V6 & 5.0L V8 petrol engines, including supercharged variants Direct replacement for AJ813917 (upper) & AJ813865 (lower) Genuine OEM-spec materials and pressure ratings Front-mounted, accessible installation location Tested for thermal cycling and coolant compatibility Factory original finish and connector interfaces No modifications or adapters required Compatibility Matrix Vehicle Model Years Engine Fitment Land Rover Discovery 4 (LR4) 2010–2016 3.0L V6 TDV6 / 5.0L V8 Direct Fit Range Rover Sport L494 2014–2021 3.0L V6 / 5.0L V8 SC Direct Fit Range Rover Velar L560 2017–2022 3.0L V6 / 5.0L V8 SC Direct Fit Land Rover Defender 110 L663 2020–2026 3.0L V6 SC / 5.0L V8 SC Direct Fit Jaguar F-Pace / XE 2015–2020 3.0L V6 / 5.0L V8 Direct Fit Range Rover Sport L320 2005–2013 4.4L TDV8 / 5.0L V8 Not Compatible Important: This listing includes configuration options. Upper (LR090630), lower (LR092992), or combined (LR050935) assemblies are available. Verify your part number before purchasing, or contact us with your VIN for confirmation. Installation Notes Difficulty: Intermediate | Time: 1.5–2.5 hours Drain coolant system – Allow engine to cool completely. Position drain pan under radiator petcock. Open coolant drain and lower radiator hose. Remove components blocking access – Depending on engine bay layout, you may need to remove upper radiator hose clamps, thermostat cover bolts, or intake ducting. Disconnect hose from water outlet tube – Slide clamp off connection point. Note hose orientation for reassembly. Unbolt old tube – Remove 2–3 bolts securing tube to engine block. Inspect gasket or O-ring condition; discard and replace if damaged. Install new tube – Align with bolt holes. Insert new gasket/O-ring if supplied. Hand-thread bolts first, then torque to 25 Nm (18 ft-lb) in sequence. Reconnect hose and clamp – Slide upper radiator or heater hose onto new outlet tube. Secure with hose clamp. Do not overtighten. Refill coolant system – Use OEM-spec coolant (Jaguar/Land Rover approved). Fill radiator, overflow tank, and bleed air from system per owner's manual. Test circulation – Run engine at idle with heater set to maximum. Check for leaks. Allow 5–10 minutes for thermostat opening before road test. Safety Note: Do not work on a hot engine. Coolant system pressure can cause serious burns. Wear safety glasses and keep skin protected. Dispose of old coolant responsibly per local environmental regulations. Ready to Restore Cooling System Integrity? Water outlet tube failure is preventable. Order the factory-spec upper, lower, or complete assembly today. Engineered for Range Rover Sport, Discovery 4, Velar, and Defender. 30-day money-back guarantee. Ships worldwide via DHL. Shop Water Outlet Tubes Use code 22GET20 – 20% off any 2 items ⭐ 4.9/5 from 12,300+ reviews 🚚 Worldwide DHL shipping 🛡️ 30-day money-back guarantee 📞 +44 203 943 9919 (9am–7pm Mon–Fri) Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. All vehicle names, logos, and specifications are property of their respective manufacturers. This product is a genuine aftermarket equivalent designed for direct fitment and OEM performance. Part numbers listed are for compatibility reference only. ```

```html Victorious Automotive · Range Rover Evoque / Discovery Sport · Cooling System Expansion Tank Lower Hose – Range Rover Evoque 2.0L Turbo OEM-spec rubber coolant hose engineered to restore factory cooling system integrity and reliability. L538 / L550 2012–2018 2.0L Turbo Petrol Radiator Hose Direct Fit OEM LR024241 Overview The Range Rover Evoque L538 (2012–2018) and Discovery Sport L550 (2015+) with 2.0L turbocharged petrol engines rely on precision-engineered cooling lines to manage heat under sustained load and high performance. The expansion tank lower hose is a critical component in this system, connecting the radiator expansion tank to the engine block and dissipating residual heat during and after operation. Over time, OEM rubber hoses deteriorate due to thermal cycling, pressure fluctuations, and exposure to corrosive coolant chemistry. Cracks, splits, and seepage lead to coolant loss, air ingestion into the system, overheating, and—if left unaddressed—catastrophic engine damage. This genuine replacement hose restores OEM integrity using the same material specification and fitment geometry as the factory part. Partsmost sources this component from established automotive suppliers and validates each unit against Land Rover technical standards. A full 12-month warranty and worldwide shipping via premium couriers ensure peace of mind whether you're a DIY enthusiast or supporting a professional technician. What's Included 🔧 Expansion Tank Lower Hose OEM-spec rubber radiator hose assembly ✓ Direct Replacement Bolt-for-bolt compatibility with factory 🔐 12-Month Warranty Full coverage against manufacturing defect 📦 Worldwide Delivery DHL, FedEx, UPS with tracking and insurance Product Highlights OEM-equivalent rubber composition for heat and pressure resistance Genuine Land Rover part numbers: LR024241 & LR035435 Manufactured to exacting thermal and durability specifications Prevents coolant seepage and system air ingestion Factory fitment—no modification or adapter required Compatible with 2.0L turbocharged petrol engines only Restores full cooling system efficiency and reliability Easy and fast installation for experienced technicians High performance under sustained thermal load Premium alternative to OEM-original parts at competitive pricing Vehicle Compatibility Vehicle Model Years Engine Compatibility Range Rover Evoque L538 2012–2018 2.0L Turbo Petrol Direct Fit Land Rover Discovery Sport L550 2015+ 2.0L Turbo Petrol Direct Fit Range Rover Evoque L551 2019+ 2.0L Turbo Petrol Not Compatible Discovery Sport L575 2024+ All engines Not Compatible Important: Verify your exact model year and engine code before purchase. Hose geometry and connection points differ across generations. Consult your service manual or contact us at +44 203 943 9919 (Mon–Fri 9am–7pm) if you're unsure. Installation Notes Difficulty: Intermediate | Time: 45–90 Minutes Safety First: Allow engine to cool completely. Remove negative battery terminal and drain cooling system into a clean container. Do not skip this step—pressurized coolant will cause severe burns. Access: Remove any plastic undertray or engine cover necessary to reach the expansion tank and lower radiator connections. Disconnect Old Hose: Loosen hose clamps at both ends using a Phillips or flat-head screwdriver. Twist gently and pull the old hose free. Inspect the mating surfaces for debris or corrosion. Install New Hose: Slide the new hose onto the expansion tank outlet and radiator inlet. Position clamps 1–2 cm from each end and tighten securely—snug but not over-tightened to avoid crushing. Refill Coolant: Pour fresh 50/50 coolant mixture (or per your service manual spec) back into the expansion tank to the "MAX" line. Reinstall filler cap. Bleed Air: Start the engine and allow it to idle for 5–10 minutes. Monitor the temperature gauge. If air pockets remain, open the bleed screw on the thermostat housing briefly, then retighten. Final Check: Turn off the engine, allow coolant to cool, and recheck the level. Top up if necessary. Run the engine once more and inspect all connection points for drips. Warning: Never run the engine with the cooling system empty or partially empty. Air in the system will cause overheating, loss of heater function, and potential head gasket failure. If you are not confident with this procedure, seek assistance from a qualified Land Rover technician. Ready to Restore Your Cooling System? This OEM-spec expansion tank lower hose is the definitive replacement for Range Rover Evoque L538 and Discovery Sport L550 2.0L turbo engines. Order now with confidence—backed by a 30-day money-back guarantee, 12-month warranty, and 4.9-star verified reviews. Shop This Part Apply code 22GET20 for 20% off when purchasing 2 or more items. ✓ 12,300+ verified reviews ✓ 30-day money-back guarantee ✓ Worldwide DHL, FedEx, UPS shipping ✓ Expert phone support +44 203 943 9919 Disclaimer: Victorious Automotive is an independent retailer specializing in Land Rover, Range Rover, and Defender accessories. We are not affiliated with, endorsed by, or an official subsidiary of Jaguar Land Rover Limited, Land Rover (a division of JLR), Range Rover, or any Land Rover marque or trademark owner. All vehicle names, logos, and specifications are retained for identification purposes only. Compatibility information is provided in good faith based on OEM part numbering and published service data. Always consult your vehicle's service manual or contact a Land Rover dealer to confirm fitment before purchase. Victorious Automotive assumes no liability for incorrect installation, misapplication, or damage arising from improper use. ```

Victorious · Cooling Systems · Engine Components Engine Oil Cooler Assembly – Land Rover 5.0L V8 & 3.0L V6 Petrol OE-specification cooling component engineered to maintain optimal oil temperature across Discovery 4, Range Rover, Range Rover Sport, Discovery 5, Velar and more. LR010754 2010–2022 5.0L V8 / 3.0L V6 Aluminum Core Direct Replacement Overview If you own a Land Rover Discovery 4, Range Rover L405, Range Rover Sport L494, or any modern Velar or Discovery 5, your engine oil cooler works silently to keep temperatures in the sweet spot. When it fails—and they do—oil temps spike, viscosity breaks down, and you're facing catastrophic wear. This isn't theoretical. A failed cooler can destroy your engine in weeks. Our engine oil cooler assembly is built to OE specification using the same core technology Land Rover engineers designed. It fits directly into your engine bay with zero modification, uses factory fastening points, and works seamlessly with your existing cooling system and oil circulation pathways. Built from durable aluminum with precision-brazed joints, it's engineered to last. Engineered for vehicles running the iconic 5.0L supercharged V8 (Discovery 4, Range Rover 2010–2012) or the efficient 3.0L twin-turbo V6 (Range Rover Sport 2014+, Discovery 5 2017+, Velar 2017+), this cooler maintains oil flow and heat dissipation under real-world British driving—whether that's spirited moorland driving or steady motorway cruising. What's Included 🔧 Oil Cooler Assembly Complete unit, ready to install 📋 Fitting Instructions Step-by-step reference guide ✓ OE Specification Verified Part number LR010754 certified 🛡️ 30-Day Money Back Full refund guarantee, no questions Key Highlights Direct OE replacement—no modifications needed Maintains oil temp between 90–110°C under load Aluminum core with precision-brazed joints Factory fastening and port dimensions Compatible with 5.0L V8 and 3.0L V6 engines Covers Discovery 4, Range Rover, Sport, Velar, Discovery 5 Proven reliability across 100,000+ Land Rover vehicles Part number LR010754 – OE reference standard Low-pressure tested before dispatch 12-month manufacturer warranty included Compatibility Vehicle Model Year Range Engine Status Discovery 4 (L319) 2010–2016 5.0L V8 Petrol Direct Fit Range Rover (L405) 2010–2012 5.0L V8 Petrol Direct Fit Range Rover Sport (L494) 2014–2022 3.0L V6 Petrol Direct Fit Discovery 5 (L462) 2017–2024 3.0L V6 Petrol Direct Fit Range Rover Velar (L560) 2017–2024 3.0L V6 Petrol Direct Fit Range Rover Sport (L320) 2005–2013 Other engines Not Compatible Defender (L663) 2020–2024 All models Not Compatible Note: Always verify your engine displacement and part number before purchase. If unsure, contact us with your VIN or registration details and we'll confirm fitment within 2 hours. Installation Guide Difficulty: Intermediate | Time: 2–3 hours Warm the engine to 40°C, then allow to cool for 10 minutes. Do not work on a hot engine. Disconnect the negative battery terminal and secure it away from the post. Drain the cooling system into a clean container. Catch any oil spillage with absorbent material. Remove the lower undertray (plastic belly pan) secured by 6–8 Torx fasteners. Unbolt the cooler assembly from its mounting bracket—typically 4 bolts (M8 or M10 depending on engine). Support with your hand as you remove the final bolt. Disconnect oil inlet and outlet hoses using a hose clamp tool. Have a drain tray ready. Plug both ports immediately. Position the new assembly on the mounting bracket, align bolt holes, and hand-start all fasteners before final tightening. Torque to 25–30 Nm. Connect hoses using OE-spec hose clamps. Oil flows from the engine block to the inlet port (marked with an arrow). Verify tightness by tugging each hose. Refill the cooling system with OE coolant mix (50/50 distilled water and concentrate). Bleed air by running the engine at idle until the thermostat opens, then top off. Reinstall the undertray and reconnect the battery terminal. Start the engine and check for drips around all connection points. Allow 5 minutes of idle running, then check coolant level once more. Important: This cooler carries oil pressure and coolant flow. Even minor leaks can damage the engine. If you're not confident in your mechanical skills, have a qualified Land Rover technician perform the installation. Improper fitting voids the warranty. Ready to Keep Your Engine Cool? Don't wait for oil temp spikes or catastrophic cooling failure. Install this OE-spec cooler now and drive with confidence for years to come. Shop Oil Coolers Use code 22GET20 to save 20% when you buy any 2 items 4.9★ Rated on 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS shipping 📞 +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket specialist. We are not affiliated with Jaguar Land Rover Limited, Range Rover, Land Rover, Defender, or any OEM manufacturer. All product names, logos, and brand references are the property of their respective owners. This product is a high-quality aftermarket replacement engineered to OE specification; it is not an original equipment part. Always verify vehicle compatibility before purchase.

Victorious · Land Rover Freelander LR2 · Cooling System Radiator Coolant Hose Upper & Lower for Land Rover Freelander LR2 2008–2012 OE-quality replacement hoses engineered to restore optimal coolant flow and engine thermal management. LR2 L359 2008–2012 3.2L Petrol Rubber Compound Upper & Lower Variants OE Direct Fit Overview The Freelander LR2 L359's cooling system demands precision engineering and robust materials to handle demanding terrain and variable climates. Over time, original radiator hoses degrade from engine heat, UV exposure, and pressure cycles, leading to leaks, reduced coolant circulation, and potential engine overheating—a costly failure on any Land Rover expedition. This OE-quality replacement hose set (upper and lower) is manufactured to original equipment specifications using premium rubber compounds formulated to withstand high-temperature coolant flows, internal pressure, and environmental stress. Both hoses are direct replacements for factory originals, featuring identical fitment geometry and integrated connection points. Restoring your LR2's cooling efficiency protects engine longevity, maintains consistent operating temperatures, and prevents catastrophic thermal damage—essential for reliability on and off-road. What's Included 🔧 Upper Radiator Hose OE Part LR000931 – Thermostat outlet to radiator inlet 🔧 Lower Radiator Hose OE Part LR007413 – Radiator outlet to water pump return ✓ Direct Fit Geometry No modification required; factory-correct routing and attachment points 📦 12-Month Warranty Full coverage against manufacturing defects and material failure Product Highlights OE-equivalent rubber formulation rated for 120 °C sustained coolant temperatures Precision-moulded internal baffles and reinforcement prevent kinking and flow restriction Factory fitment: no adapters, no modifications, no guesswork Upper and lower hoses designed as a matched pair for optimal circulation balance PT-origin manufacturing meets Land Rover engineering tolerances Corrosion-resistant fittings and connection sleeves for long service life Compatible with OEM coolant and aftermarket long-life alternatives Cross-referenced to GATES, RAPRO, THERMOTEC, and VAICO OE-equivalent standards Tested for pressure cycling durability (100,000+ pressurisation cycles) Professional-grade quality without premium pricing Compatibility Variant Model & Year Engine Part No. Fit Upper Hose Freelander LR2 2008–2012 3.2L Petrol (TDV6 excluded) LR000931 Direct Fit Lower Hose Freelander LR2 2008–2012 3.2L Petrol (TDV6 excluded) LR007413 Direct Fit Lower Hose (Alt.) Freelander LR2 2008–2012 3.2L Petrol LR005294 Direct Fit Diesel Models Freelander LR2 TDV6 2.7L/3.0L Diesel N/A Not Compatible ⚠️ Engine Confirmation: This hose set is engineered exclusively for the 3.2L petrol V6 variant. Diesel models (TDV6) use different routing and connection geometry. Confirm your engine type on your V5C registration or engine bay identification before ordering. Installation Notes Difficulty Level: Intermediate | Time: 1.5–2 Hours Preparation: Allow engine to cool completely (minimum 2 hours). Disconnect negative battery terminal to disable electric coolant fans. Remove plastic engine cover if fitted. Drain Coolant: Position a drain pan beneath the radiator. Open the bleed screw on top of the thermostat housing and lower radiator drain plug. Allow full system drainage. Remove Upper Hose: Unclip two hose clamps (thermostat end and radiator inlet). Gently twist and withdraw hose. Inspect radiator and thermostat housing connections for debris or damage. Remove Lower Hose: Unclip radiator outlet clamp and water pump inlet clamp. Support radiator slightly if necessary for access. Remove hose. Install Lower Hose First: Slide new lower hose onto water pump return stub (inlet side). Secure with original hose clamp, positioning clamp band on reinforced section of hose. Tighten to hand-tight, then quarter-turn with screwdriver. Connect Radiator Outlet: Route hose along original path, insert into radiator lower tank connection, and secure second clamp. Ensure hose does not contact sharp edges or hot surfaces. Install Upper Hose: Connect thermostat outlet end first, then route hose to radiator top inlet. Secure both clamps using same technique (hand-tight + quarter-turn). Refill & Bleed: Close drain plugs and reconnect hose clamps. Pour OEM or equivalent long-life coolant into expansion reservoir to "cold" level mark. Start engine with heating set to maximum, and run until upper hose warms and thermostat opens (fan may cycle). Top up coolant as level drops. Repeat until level stabilises and no air pockets remain. Test Run: Run engine for 5 minutes in neutral. Check all hose connections, clamps, and floor beneath vehicle for leaks. Verify coolant level after cooling period (15 minutes). Final Check: Refit engine cover. Reconnect battery. Perform a short test drive and re-inspect connections upon return. ⚠️ Coolant Safety: Never open coolant system on a hot engine—internal pressure can cause severe scalding. Always work with a fully cooled system. Use only approved automotive coolant; mixing coolant types or using water alone will compromise thermal performance and accelerate component corrosion. Dispose of old coolant responsibly at a certified recycling facility; do not pour down drains. Ready to Restore Cooling System Reliability? Premium OE-quality radiator hoses engineered for your Freelander LR2. Backed by our 30-day money-back guarantee and 12-month warranty. Ships worldwide via DHL, FedEx, or UPS. Shop Cooling System Parts Use code 22GET20 for 20% off any 2 items ✓ 4.9/5 Stars – 12,300+ verified reviews ✓ 30-Day Money-Back – no questions asked ✓ Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, logos, and trademarks referenced are the property of their respective owners. This product is designed to be compatible with the specified vehicle and engine type; always verify fitment before purchase. Installation should be performed by a qualified technician. Improper installation may void vehicle warranty. Use of this product constitutes acceptance of all terms and conditions outlined in our warranty and returns policy.

```html Victorious · Land Rover · Cooling System 3.0L TDV6 Upper Radiator Coolant Hose – Discovery LR4 & Range Rover Sport OE-spec replacement upper coolant hose engineered to restore thermal management on 3.0L TDV6 engines. Discovery LR4 Range Rover Sport 2010–2017 3.0L TDV6 Upper Coolant Pipe Direct Fit Overview The 3.0L TDV6 engine found in Land Rover Discovery LR4 and Range Rover Sport models relies on precisely engineered coolant pathways to maintain optimal operating temperature. This upper radiator hose is the critical link between your engine and radiator core, and degradation—from age, heat cycling, or mineral buildup—compromises cooling efficiency and risks overheating. This is a genuine OE-specification upper coolant hose (part numbers LR043326 / LR095544) manufactured to factory tolerances. Unlike generic automotive hoses, this part is engineered specifically for TDV6 thermal loads, pressure ratings, and connection geometry. Installation is straightforward and requires no modification to existing systems. Whether you're addressing a visible crack, hardening, or planning preventive maintenance, this direct-fit hose restores factory cooling performance and reliability. Six-month warranty included. What's Included 🔧 Upper Radiator Hose Genuine OE part LR095544 ✓ Direct Fit Design No modification required 🛡 6-Month Warranty Parts defect coverage 📦 Secure Packaging Ready to install Product Highlights OE-Specification Design – Engineered to factory pressure and temperature ratings for 3.0L TDV6 Direct Fit Installation – No adapters, modifications, or custom fitting needed Genuine Part Number – LR095544 / LR043326 (OE cross-reference) Temperature Resistant – Rated for high TDV6 thermal cycling and coolant flow Factory Geometry – Precise bend and connector placement matches original equipment Quick Installation – Upper hose access requires basic hand tools; approximately 30–45 minutes Prevents Overheating – Restores full thermal transfer from engine to radiator core New Condition – Not reconditioned; delivered ready to install Worldwide Shipping – DHL, FedEx, UPS, TNT (30-day money-back guarantee) Expert Support – Call +44 203 943 9919 (Mon–Fri, 9am–7pm) for fitment questions Compatibility Vehicle Model Years Engine Fit Status Land Rover Discovery LR4 2010–2017 3.0L TDV6 Direct Fit Range Rover Sport 2010–2017 3.0L TDV6 Direct Fit Discovery 3 2004–2009 3.0L TDV6 Not Compatible Range Rover Sport L460 2022+ 3.0L MHEV / 4.4L V8 Not Compatible Range Rover Vogue L405 2013–2020 3.0L V6 Supercharged Not Compatible Before purchasing: Confirm your vehicle's VIN and exact engine code. Email or call +44 203 943 9919 with your VIN or part number to verify fitment. This hose is engineered for 3.0L TDV6 diesel engines only. Installation Notes Difficulty: Moderate | Time: 30–45 minutes Cool Engine: Allow engine to cool for 15–20 minutes. Do not work on a hot engine; coolant is under pressure and scalding. Drain Coolant (Optional): If replacing to prevent future leaks, drain system via the lower radiator plug. Catch fluid in a clean container for reuse or recycling. Remove Upper Hose Clamps: Locate the upper radiator hose connectors at the radiator and thermostat housing. Loosen hose clamps with a screwdriver or hose clamp pliers. Disconnect Hose: Gently twist and pull the old hose free from both connections. Drain any remaining coolant into a container. Install New Hose: Slide the new upper hose onto both connectors, ensuring a full seat. Hand-tighten hose clamps first for alignment, then use a screwdriver to tighten securely (snug but not over-tightened). Refill Coolant: If drained, top up the radiator and overflow tank with the factory-spec coolant for your vehicle. Do not mix coolant types. Bleed Air: Start engine and allow to reach normal operating temperature. Turn on cabin heater to full. Look for air pockets in the coolant system; top up if necessary. Inspect Connection: Once cool, check hose connections for leaks or seepage. Retighten clamps if needed. Dispose Properly: Coolant is toxic. Never dump down drains. Take used coolant to a local recycling facility or mechanic. Safety First: Never remove the radiator cap from a hot engine. Pressurized coolant can cause severe burns. Allow at least 15 minutes of cool-down time before starting work. Ready to Restore Peak Cooling Performance? This OE-spec upper radiator hose is engineered to bring your 3.0L TDV6 back to factory thermal management. Quick, direct-fit installation—no surprises, no adaptation. Shop Cooling System Parts Use code 22GET20 to save 20% when you buy any 2 items. 🌍 Worldwide Shipping – DHL, FedEx, UPS, TNT ✓ 30-Day Money Back – No questions asked ⭐ 4.9/5 Stars – 12,300+ verified reviews 📞 Expert Support – +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover, or Jaguar Cars Ltd. All vehicle names, badges, and logos are the property of their respective owners. This product is designed as a direct replacement part and is not original equipment manufactured by JLR. All part numbers and compatibility data are provided for reference only. Always verify fitment with your vehicle's VIN before purchase. ```

Victorious · Land Rover Freelancer LR2 · Cooling System Intercooler Inlet Manifold Hose — Freelander LR2 2.2 Turbo Diesel Direct-fit intercooler-to-manifold hose assembly with hardware. OEM-specification performance for 2008–2014 Freelander LR2 diesel models. Freelander LR2 2008–2014 Reinforced Rubber Direct Fit Cooling System OEM Specification Overview The Freelander LR2 (2008–2014) with 2.2-litre single-turbo diesel engine demands precision cooling system integrity. The intercooler-to-inlet-manifold hose is a critical link in your engine's thermal management—any degradation compromises boost efficiency, engine response, and long-term reliability. This is a direct-fit replacement hose assembly engineered to OEM specification. It connects the intercooler outlet directly to the inlet manifold, channelling cooled, pressurised air into the combustion chamber. Complete with reinforced rubber construction and stainless-steel hose clamps, it replicates OEM performance without compromise. Whether you've experienced a split, perished hose, or blocked intercooler discharge, this assembly restores proper boost pressure, eliminates air leaks, and stabilises engine temperature across all driving conditions. Fits front-right lower position; direct bolt-on installation. What's Included 🔧 Intercooler Hose Assembly Complete manifold-to-intercooler connection, pre-formed and ready to install 🔩 Stainless-Steel Hose Clamps (×2) Heavy-duty clamps prevent pressure loss and vibration-induced leaks 📋 Installation Instructions Quick-reference guide with torque specs and positioning diagram ✓ 12-Month Warranty Coverage against material defects and manufacturing faults Product Highlights OEM-Specification Design: Matches original equipment dimensions, routing, and pressure rating precisely Reinforced Rubber Construction: Resists oil, diesel, and extreme boost temperatures over 4+ year service life Direct Fit, No Adapters: Bolts directly to intercooler outlet and inlet manifold—zero modifications needed Includes Hardware: Two stainless-steel clamps supplied; no additional fittings required 74mm & 67mm Bore Diameters: Dual-diameter design optimises flow velocity and pressure uniformity Front-Right Lower Positioning: Factory-correct location minimises thermal soak and routing complications Pressure-Tested: Each assembly verified for air-tightness before dispatch Weights ~1.2kg: Minimal thermal mass; no impact on engine bay heat management Fast Installation: 15–20 minute job for trained technicians; single service point No Restrictions: Full cross-sectional bore—zero restriction compared to OEM Compatibility Vehicle Engine Years Fit Land Rover Freelander LR2 2.2L Turbo Diesel (Single Turbo) 2008–2014 Direct Fit Land Rover Freelander LR2 2.0L Petrol 2008–2014 Not Compatible Land Rover Freelander 1 (L314) All Engines 1997–2006 Not Compatible Range Rover Sport L320 2.7L TDV6 Diesel 2005–2013 Not Compatible Verify Part Numbers Before Purchase: Cross-check your current hose assembly with OEM numbers LR066429, LR002589, or LR000927. Confirm engine code on your V5C registration document. Installation Difficulty Level: Beginner to Intermediate | Time: 15–20 minutes Disconnect Battery Negative Terminal. Always de-energise before touching cooling circuit components. Allow Engine to Cool. Wait 30+ minutes after engine shutdown to avoid scalding coolant contact. Locate Intercooler Outlet and Inlet Manifold. Reference installation diagram; outlet sits driver-side, manifold inlet on cylinder head top-front. Remove Old Hose Assembly. Loosen both hose clamps with adjustable wrench; gently twist and withdraw hose from both ports. Drain any residual boost pressure into catch pan. Inspect Connection Ports. Wipe clean with dry cloth; check for damage, corrosion, or debris. Replace rubber seals if cracked or flattened. Route New Hose Assembly. Position hose along factory path (driver-side engine bay); avoid contact with exhaust manifold, ancillaries, or high-heat surfaces. Secure to Intercooler Outlet. Slide hose onto outlet nozzle (74mm bore); position clamp ~5mm from hose end; tighten to 8–12 Nm using torque wrench. Secure to Inlet Manifold. Slide hose onto manifold inlet (67mm bore); position clamp ~5mm from hose end; tighten to 8–12 Nm. Pressure Test. Start engine; rev gently to 1500 rpm; inspect both clamp points for air weeping. Tighten further if micro-leaks detected. Reconnect Battery. Re-engage negative terminal; clear any fault codes using diagnostic scanner if required. Road Test. Drive gently for 5 km to verify boost delivery, turbo spool, and engine response. No whistle, surge, or overboost faults should occur. ⚠️ Never force the hose onto ports. If resistance is met, verify you have the correct assembly (bore sizes 74mm outlet, 67mm manifold). Do not use sealants or thread-lock on rubber hose interfaces—hose design relies on friction fit only. Over-tightening clamps will crush the hose wall and create internal blockage. Why Choose Victorious We specialise in OEM-specification cooling and turbo components for Land Rover diesel platforms. Every intercooler hose assembly is pressure-tested in-house and cross-referenced against official Land Rover parts catalogues. We ship worldwide via DHL, FedEx, and UPS with full tracking. If you're unsure of fitment, call +44 203 943 9919 (Mon–Fri 9am–7pm) and speak to our technical team. 30-day money-back guarantee on all products. Ready to Restore Boost Integrity? Order this OEM-specification intercooler hose today and reclaim your Freelander LR2's turbo diesel performance. Fast shipping, expert support, 30-day guarantee. Shop Intercooler Hose Assembly Use code 22GET20 for 20% off any 2 items 4.9★ Trustpilot · 12,300+ verified reviews Worldwide Shipping · DHL, FedEx, UPS, TNT 30-Day Guarantee · Money back, no questions Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar, or Tata Motors. All vehicle names, logos, and brands are the property of their respective owners. This product is engineered to OEM specification but is an aftermarket component. Always verify compatibility with your specific vehicle's VIN before purchase. Installation should be performed by a qualified technician. Victorious Automotive assumes no liability for improper installation, damage, or loss resulting from use of this product.

```html Victorious · Multi-Vehicle · Cooling System Parts Oil Cooler Gasket – Land Rover & Range Rover Factory-spec gasket seal for petrol V6 and V8 oil cooling systems. Direct replacement for Discovery, Range Rover, and Range Rover Sport. LR010770 / AJ811904 2010–2022 Petrol V6 & V8 OEM Gasket 3.0L & 5.0L Overview The oil cooler gasket is a critical sealing component in Land Rover and Range Rover cooling systems. It sits between the oil cooler and engine block, preventing pressurized oil leakage during operation. Over time, thermal cycling causes the factory rubber gasket to harden, crack, and weep—leading to loss of oil pressure, coolant contamination, and potential engine damage. This replacement gasket meets OEM specifications and is manufactured to the same tolerances as the original part. It's suitable for Discovery 3 & 4, Discovery 5, Range Rover Vogue L405, Range Rover Sport L494, and Range Rover Velar equipped with 3.0L V6 TDV6 or 5.0L V8 petrol engines. Installation requires no special tools and takes under an hour. The gasket comes new, pre-fitted to help prevent damage during handling, and includes a torque specification card to ensure proper sealing. What's Included 🔧 Oil Cooler Gasket OEM-equivalent rubber seal, LR010770 📋 Torque Specification Card Correct fastener tightness guide 📦 Protective Packaging Padded box, full UK courier tracking ✅ 30-Day Money-Back Guarantee Hassle-free returns, no questions asked Why Choose This Gasket OEM part number match: LR010770 & AJ811904 Manufactured to original specifications Prevents oil seepage and coolant mixing Thermal-resistant rubber compound Direct-fit, no modifications required Tested on V6 and V8 petrol powerplants Vacuum-sealed in original packaging Works with standard engine oil grades Restores cooling system integrity Reduces risk of air-lock in cooling circuit Compatibility Vehicle Model Year Range Engine Fit Discovery 3 2004–2009 3.0 V6 TDV6 Direct Fit Discovery 4 2009–2014 3.0 V6 TDV6 Direct Fit Discovery 5 2017–2022 3.0 V6 Petrol Direct Fit Range Rover Vogue L405 2013–2020 5.0 V8 Petrol Direct Fit Range Rover Vogue L405 2013–2020 3.0 V6 TDV6 Direct Fit Range Rover Sport L494 2014–2021 3.0 V6 Petrol Direct Fit Range Rover Sport L494 2014–2021 5.0 V8 Petrol Direct Fit Range Rover Velar 2018–2022 3.0 V6 Petrol Direct Fit Range Rover Velar 2018–2022 5.0 V8 Petrol Direct Fit Jaguar XF / XJ (AJ811904) 2009–2015 5.0 V8 Petrol Direct Fit Check your VIN: Cooling system configurations can vary by model year and market. If unsure of your exact fit, contact us on +44 203 943 9919 (Mon–Fri 9am–7pm) or send your 17-character VIN and we'll confirm compatibility in minutes. Installation Difficulty: Intermediate | Time: 45–60 minutes Safety first: Allow engine to cool completely. Disconnect negative battery terminal. Drain coolant: Open radiator drain plug (lower passenger side). Catch in approved container. Do not reuse. Remove old gasket: Unbolt the oil cooler assembly (3–4 bolts). Carefully pry away from engine block using a plastic spoon. Remove old gasket and clean mating surfaces with lint-free cloth and isopropyl alcohol. Install new gasket: Position new gasket on engine block mating surface. Align oil cooler mounting holes. Insert bolts hand-tight first. Torque fasteners: Using the included card as reference, torque bolts to 25–28 Nm in a criss-cross pattern. Do not over-tighten. Refill coolant: Fill radiator with fresh Land Rover Coolant (Motorcraft red, 50:50 mix). Bleed air from system by running engine at idle for 5 minutes with heater on. Check pressure: Once cooled, pressure-test the cooling system to 1.4 bar. Monitor for leaks over first 30 minutes of running. Reconnect battery: Reconnect negative terminal and start engine. Check for fault codes. Disposal note: Used coolant is toxic. Take to a licensed waste facility or authorized Land Rover dealer. Never pour down drains. Ready to Restore Your Cooling System? Keep your Discovery, Range Rover Sport, and Range Rover running cool and leak-free. OEM-spec gasket, UK-stocked, lifetime guarantee on defects. Shop Now Use code 22GET20 to get 20% off when you buy any 2 items. 4.9★ 12,300+ verified reviews ✓ 30-day money-back guarantee 🌍 Ships worldwide via DHL, FedEx, UPS 📞 Expert support +44 203 943 9919 Victorious Automotive is an independent parts supplier. We are not affiliated with Land Rover, Range Rover, Jaguar, or Jaguar Land Rover Limited. Land Rover®, Range Rover®, Discovery®, and Defender® are registered trademarks of Jaguar Land Rover Limited. All references to vehicle models, part numbers, and specifications are for fitment compatibility only and do not imply endorsement by JLR. ```

Victorious · Land Rover & Jaguar · Cooling System 3.0L V6 Heater Manifold Tube with Temperature Sensor Premium OEM replacement for Land Rover Discovery, Range Rover, and Jaguar supercharged engines—direct fit, tested durability, 12-month warranty. LR041788 Discovery LR4 Range Rover 2013+ Range Rover Sport 2014+ Jaguar XJ / XF / F-TYPE 3.0L V6 Supercharged Plastic Construction Temperature Sensor Integrated Overview If you own a Land Rover Discovery LR4, Range Rover (2013+), or Range Rover Sport (2014+), you know that the cooling system is critical to engine longevity. The heater manifold tube sits at the heart of that system—it directs coolant flow and houses the vital temperature sensor your engine relies on for precise thermal management. This is a direct-fit replacement for Partsmost's premium cooling line, engineered to OEM specifications and compatible with the AJ126 3.0L supercharged V6 found across Land Rover and Jaguar platforms. It arrives as a complete assembly with integrated temperature sensor and modern plastic construction designed for reliability and longevity in both city and off-road conditions. Designed for enthusiasts who demand precision and durability. Whether you're restoring a cooling system after age-related wear or upgrading from a failed OEM unit, this tube delivers the thermal management your engine deserves—backed by a full 12-month warranty and our 30-day money-back guarantee. What's Included 📦 Heater Manifold Tube Assembly Complete with integrated temperature sensor, OEM-equivalent construction 📋 Installation Documentation Full part numbers and fitment reference guide 🔒 12-Month Warranty Full coverage on materials and workmanship 🚚 Global DHL/FedEx Shipping Tracked delivery to over 220 territories Key Highlights Direct OEM Replacement: Engineered to exact original equipment specifications Integrated Temperature Sensor: Plug-and-play thermal monitoring—no recalibration needed AJ126 3.0L V6 Compatible: Certified for supercharged engines across Land Rover and Jaguar Durable Plastic Construction: Heat-resistant polymer rated for 3.0L thermal demands Multiple Part Number Match: LR041788, LR075991, LR109401, LR122710, and more Front-Mount Position: Easy access for service and replacement Tested Durability: Proven performance in both road and off-road conditions Quick Installation: Direct swap—no modification required 30-Day Money-Back Guarantee: Full refund if not satisfied Worldwide Support: UK phone support Mon–Fri, 9am–7pm Compatibility Matrix Vehicle Model Engine Year Range Compatibility Land Rover Discovery LR4 3.0L V6 Supercharged 2009–2016 Direct Fit Range Rover Vogue 3.0L V6 Supercharged 2013–2020 Direct Fit Range Rover Sport 3.0L V6 Supercharged 2014–2022 Direct Fit Jaguar XJ 3.0L V6 Supercharged 2012–2019 Direct Fit Jaguar XF 3.0L V6 Supercharged 2008–2019 Direct Fit Jaguar F-TYPE 3.0L V6 Supercharged 2013–2019 Direct Fit Jaguar XE 3.0L V6 Supercharged 2015–2019 Direct Fit Jaguar F-PACE 3.0L V6 Supercharged 2015–2019 Direct Fit Other 3.0L V6 models Non-supercharged Any year Not Compatible Before You Order: Verify your engine is the 3.0L AJ126 supercharged V6. Cross-reference your current part number against the list below. Unsure? Contact us with your VIN—we'll confirm fitment free of charge. Installation Notes Difficulty Level: Intermediate | Time: 45–90 minutes Prepare: Allow engine to cool fully. Disconnect the negative battery terminal to prevent electrical shorts during sensor manipulation. Drain (Optional): If coolant spillage concerns you, drain the system into a clean container. Otherwise, cap hoses with shop towels to minimize losses. Remove Old Tube: Unbolt the existing manifold tube from its front-mounted position using a socket set. Disconnect the integrated temperature sensor plug carefully. Transfer Sensor (if required): If your replacement does not include a pre-wired sensor, carefully remove the old one and install into the new tube. Install New Assembly: Position the replacement tube, secure all bolts to OEM torque specification (typically 20–25 Nm), and reconnect the sensor harness with a firm click. Pressure Test: Refill coolant to spec, run the engine for 5 minutes, and monitor for leaks around all connection points. Bleed Air: If your system requires air bleeding, follow your vehicle's service manual protocol or contact our support team. ⚠️ Important: Never work on the cooling system while the engine is hot. Pressurized coolant can cause severe burns. Always allow a minimum of 30 minutes cool-down time before disconnecting hoses. Ready to Restore Your Cooling System? OEM-spec heater manifold replacement with integrated temperature sensor. Direct fit for Discovery LR4, Range Rover, and Jaguar 3.0L V6 supercharged engines. Backed by 12 months' warranty and 30-day money-back guarantee. Shop Now Use code 22GET20 for 20% off any 2 items ✓ 12,300+ verified reviews ✓ 4.9/5 stars ✓ 30-day money back ✓ Worldwide DHL/FedEx ✓ UK phone support Victorious Automotive is an independent specialist retailer of Land Rover, Range Rover, Defender, and Jaguar accessories. We are not affiliated with, endorsed by, or in any way associated with Jaguar Land Rover Limited, its subsidiaries, or official dealers. All references to vehicle models, engine codes, and OEM part numbers are for identification purposes only. Always verify compatibility with your specific vehicle before purchase.

🔧 Cooling System · Mercedes · Engine Parts 2.0L Turbo Engine Coolant Thermostat Housing – Mercedes CLA250 & GLA250 Direct-fit OEM-specification thermostat housing with integrated thermostatic valve. Restores proper engine coolant flow and operating temperature control for reliable performance. C117 / W117 X156 2013–2016 Thermostat Housing OEM Specification Includes Seals Overview The Mercedes-Benz CLA250 and GLA250 both rely on a precision thermostat housing to regulate engine coolant temperature across the 2.0L turbocharged M270 engine. Over time, thermostats degrade or stick, causing temperature fluctuations, poor heating, or potential overheating—all of which compromise efficiency and longevity. This direct-replacement thermostat housing assembly meets original equipment specifications and carries the same thermal calibration as factory units. It includes all OEM-grade seals and gaskets to eliminate coolant leaks and ensure a perfect fit into your engine's cooling circuit. Whether your original unit has failed or you're performing preventative maintenance, this housing restores accurate temperature control and maintains the precise operating window your engine was designed for. Compatible across multiple model years and engine variants—verify your part number before ordering. What's Included 🔧 Thermostat Housing Assembly Complete unit with integrated thermostatic valve 🔩 OEM Seals & Gaskets Factory-spec seals prevent leaks 📋 Installation Guide Step-by-step fitting instructions included ✅ 12-Month Warranty Full coverage against manufacturing defects Product Highlights OEM-specification design—meets original Mercedes engineering standards Integrated thermostatic valve for precise temperature regulation Complete with all seals, gaskets, and fasteners Direct replacement—no modifications required Weight: 0.57 kg—lightweight and compact design Suitable for M270 E16 and M270 E20 turbocharged engines Compatible with both CLA-Class (W117) and GLA-Class (X156) models German origin with proven reliability record Tested to maintain engine thermal operating window Easy installation—minimal technical knowledge required Compatibility Chart Vehicle Model Year Range Engine Status Mercedes-Benz CLA250 (W117) 2013–2016 2.0L Turbo M270 Direct Fit Mercedes-Benz GLA250 (X156) 2014–2016 2.0L Turbo M270 Direct Fit M113 E20 Engines Various 2.0L Variant Direct Fit M270 E16 Engines Various 1.6L Turbo Direct Fit M270 E20 Engines Various 2.0L Turbo Direct Fit ⚠️ Before ordering: Verify your current thermostat housing part number against one of these OEM numbers: A2702002200 · A2702000415 · A2702000615 · A 270 200 06 15 · MAHLE TM7997 · 21M06. Confirm fitment with your vehicle's VIN if uncertain. Installation Guide ⏱️ Difficulty: Intermediate | Time: 45–60 minutes Preparation: Allow engine to cool completely. Disconnect the negative battery terminal for safety. Drain coolant: Open the drain plug on the radiator or engine block. Catch fluid in a suitable container for reuse or recycling. Remove hoses: Unbolt and gently disconnect all coolant hoses from the old thermostat housing. Unbolt housing: Remove mounting bolts securing the housing to the engine block. Note bolt locations for reassembly. Clean mating surface: Use a gasket scraper to remove old gasket material. Wipe clean with a lint-free cloth. Install new seals: Apply new gaskets to the mating surface. Do not reuse old seals. Position housing: Align the new thermostat housing and install mounting bolts. Tighten to factory torque specification (typically 20–25 Nm for Mercedes). Reconnect hoses: Reattach all coolant hoses in their original positions. Ensure clamps are tight. Fill coolant: Pour fresh coolant mixture through the radiator filler neck until level is reached. Burp the cooling system to remove air pockets. Inspect and test: Start the engine and monitor temperature gauge. Check for leaks around the new housing. Allow engine to reach normal operating temperature. Final check: Once cooled, verify coolant level again and top up if needed. Reconnect battery terminal. ⚠️ Do not operate the engine without coolant. Use only Mercedes-approved coolant or equivalent G11/G12 specification. Running without proper coolant will cause rapid overheating and severe engine damage. Ready to Restore Cooling System Performance? A faulty thermostat housing leads to temperature swings, reduced fuel efficiency, and premature engine wear. This OEM-spec replacement restores precise thermal control and protects your Mercedes investment for years to come. Add to Cart Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 Stars – 12,300+ verified reviews 🚚 Worldwide Shipping – DHL, FedEx, UPS, TNT ✅ 30-Day Guarantee – Money-back promise 📞 Expert Support – +44 203 943 9919 Victorious Automotive is not affiliated with Mercedes-Benz, Daimler-Benz, or any official Mercedes subsidiary. All product names, logos, and references are used for identification purposes only. This product is an aftermarket replacement part and is not endorsed by or sourced from the manufacturer.

Victorious · Cooling System · Engine Heater V8 Heater Manifold Tube with Temperature Sensor for Land Rover Discovery & Range Rover Direct-fit coolant water pipe engineered to restore proper engine temperature regulation and heater performance on 5.0L supercharged V8 Land Rovers. Discovery LR4 Range Rover 2010–2020 Range Rover Sport 2010–2020 Plastic Construction Integrated Sensor OEM Equivalent Overview Land Rover's 5.0L supercharged V8 demands precise coolant flow and temperature control. Over time, the factory heater manifold tube degrades, cracks, or loses its temperature sensor calibration—causing rough idle, reduced cabin heat, and inconsistent cooling. This direct-fit replacement restores the original cooling circuit integrity without modifications. Engineered as an OEM equivalent, this heater manifold tube carries Partsmost's quality validation and fits Discovery LR4, Range Rover (2010–2020), and Range Rover Sport (2010–2020) models equipped with AJ133 V8 engines. The integrated temperature sensor maintains accurate engine management system feedback, critical for fuel economy and emissions control. Installation is straightforward for experienced DIY enthusiasts or professional technicians. A 12-month warranty backs every part, and our UK phone support team can advise on fitment before purchase. What's Included 🔧 Heater Manifold Tube Complete plastic assembly with integrated mounting points 🌡️ Temperature Sensor Factory-calibrated coolant temperature transmitter 📋 Installation Guide Basic reference for torque specs and connection points 🛡️ 12-Month Warranty Covers defects in materials and workmanship Product Highlights Direct replacement for OEM part numbers LR018273, LR109402, LR077042, LR087559, LR122709 Compatible with all Land Rover 5.0L supercharged V8 petrol engines (AJ133) Integrated temperature sensor for accurate ECU feedback Plastic construction resists corrosion and thermal cycling stress Fits front engine bay location on Discovery LR4, Range Rover, Range Rover Sport OEM-equivalent design requires no modifications to coolant hoses Restores consistent cabin heater performance and engine cooling Partsmost quality validation and UK-based technical support Reduces risk of overheating, rough idle, and cooling system leaks Easy swap for DIY installation or professional service shops Compatibility Matrix Model Years Engine Fit Land Rover Discovery LR4 2009–2016 5.0L V8 SC Direct Fit Range Rover (L405) 2010–2012 5.0L V8 SC Direct Fit Range Rover (L405) 2013–2020 5.0L V8 SC Direct Fit Range Rover Sport (L494) 2010–2013 5.0L V8 SC Direct Fit Range Rover Sport (L494) 2014–2020 5.0L V8 SC Direct Fit Jaguar XK, XKR 2010–2015 5.0L V8 Direct Fit Jaguar XF, XFR 2012–2015 5.0L V8 SC Direct Fit Range Rover Evoque, Velar 2012+ Other engines Not Compatible Discovery Sport, Discovery 5 2015+ Other engines Not Compatible Note: Verify your OEM part number before purchase. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your VIN or existing part number for exact fitment confirmation. Installation Notes Difficulty: Intermediate | Time: 1.5–2 hours Disconnect the negative battery terminal and allow the engine to cool for at least 30 minutes. Drain the coolant system into a clean container. Refill specification: PAOG2 approved coolant or equivalent. Remove the upper intake manifold cover and disconnect any electrical connectors from the old sensor. Unbolt the old heater manifold tube (typically 3–4 bolts) and disconnect coolant hoses at both ends. Install the new tube in reverse order, ensuring hose clamps are secure but not over-tightened. Connect the temperature sensor plug firmly until it clicks. Refill the cooling system and bleed air pockets by running the engine at idle with the heater on until temperature stabilizes. Check for leaks around all hose connections and sensor interface before returning to normal operation. ⚠️ Important: This job involves hot coolant and engine components. Wear protective gloves and eye protection. If your engine overheats or you encounter weld cracks in the old tube, discontinue use immediately and have the cooling system inspected by a qualified technician. Improper installation can lead to coolant leaks or engine overheating. Ready to Restore Engine Cooling Performance Stop wrestling with overheating, poor heater output, and temperature sensor faults. This OEM-equivalent heater manifold tube brings your Land Rover's V8 cooling circuit back to factory specification—backed by a 12-month warranty and UK-based technical support. Shop Now 22GET20 Save 20% when you buy any 2 items. Use code at checkout. 4.9★ 12,300+ reviews ✓ 30-day money-back guarantee 🌍 DHL, FedEx, UPS worldwide 📞 +44 203 943 9919 Victorious Automotive is not affiliated with or endorsed by Jaguar Land Rover, Land Rover, Range Rover, Discovery, or any derivative marks. All product names, logos, and brands are the property of their respective owners. This product is an aftermarket OEM-equivalent part and carries a 12-month manufacturer's warranty only. Installation should be performed by experienced DIY technicians or professional service facilities. Always verify compatibility with your specific vehicle's VIN before purchase.

```html Victorious Automotive · Multi-Vehicle · Cooling System 140kPa Radiator Expansion Tank Cap – Land Rover & Jaguar OEM-spec pressure relief cap for Discovery, Range Rover, Velar, and select Jaguar models—maintains precise cooling system integrity. Direct Fit Replacement 2006–2019 140 kPa Rating Aluminium & Rubber 12-Month Warranty Overview The radiator expansion tank cap is a critical yet often overlooked cooling system component in Land Rover Discovery, Range Rover Sport, Range Rover Velar, and Jaguar XK, XF, XJ, and F-Type models. This OEM-replacement cap maintains proper coolant pressure and prevents overheating through a precision-engineered pressure relief mechanism rated at 140 kPa—matching factory specifications exactly. A worn or damaged tank cap leads to coolant loss, air ingestion into the cooling circuit, and potential engine damage. This direct-fit replacement restores your vehicle's thermal management to factory condition using quality materials and tested engineering. Compatible across multiple generations and powertrains, it's a straightforward swap that any owner can handle. Partsmost brand quality with OEM-level fitment; includes 12-month warranty and worldwide shipping via premium couriers. Verify your OE part number against our compatibility table before ordering. What's Included 📦 Radiator Expansion Tank Cap (1×) 140 kPa direct-fit replacement ✓ OEM Fitment Assurance Matches original equipment spec 🔒 12-Month Warranty Full manufacturer coverage 🌍 Worldwide Shipping DHL, FedEx, UPS, TNT available Key Features & Benefits OEM-spec 140 kPa pressure relief valve prevents coolant overpressurisation Direct bolt-on fitment—no modifications required Quality aluminium and rubber construction for durability Restores cooling system integrity and prevents air locks Compatible with diesel and petrol engines Reduces risk of coolant loss and overheating Tested across multiple Land Rover and Jaguar generations Part number verified against OEM database Backed by 30-day money-back guarantee Fast dispatch: typically ships within 2 working days Compatibility Matrix Vehicle Model Years Engine Type Fitment Land Rover Discovery 4 2010+ 2.7 V6 Diesel Direct Fit Land Rover Range Rover 2010–2012 4.4L DOHC Diesel V8 Direct Fit Land Rover Range Rover Sport 2014+ Multi Direct Fit Land Rover Discovery 5 2017+ 2.0 Turbo Petrol (AJ200P) Direct Fit Land Rover Range Rover Velar 2017+ 2.0 Turbo Petrol (AJ200P) Direct Fit Jaguar XK 2006–2014 Multi Direct Fit Jaguar XF 2009–2015 Multi Direct Fit Jaguar XJ 2010–2019 Multi Direct Fit Jaguar F-Type 2014+ Multi Direct Fit OE Part Numbers: LR017427 · LR176860 · C2P17700 · T2H57759 · 8W838101AB · 8W83-8101-AA Installation ⚙ Difficulty: Beginner | Time: 5–10 minutes Cool the engine fully – Allow at least 30 minutes after shutdown. Never open the cooling system on a hot engine. Locate the expansion tank – Typically positioned in the engine bay on the driver's or passenger's side; consult your owner's manual if unsure. Remove the old cap – Turn anticlockwise slowly and lift away. Note the position of any seals. Clean the filler neck – Wipe with a clean, lint-free cloth to remove any debris or old rubber fragments. Install the new cap – Align the cap and turn clockwise until snug. Do not over-tighten—firm hand pressure is sufficient. Start the engine – Run for 2–3 minutes and check for any leaks around the cap. Top up coolant if necessary once engine cools. Monitor coolant level – Recheck after your first drive to confirm the seal is holding pressure correctly. ⚠ Important: Never remove the cap from a hot cooling system. Pressurised coolant can cause severe burns. Always wait for the engine to cool completely. If your cooling system overheats repeatedly after cap replacement, have a mechanic inspect the radiator and thermostat. Ready to Restore Cooling System Integrity? A failed expansion tank cap can lead to expensive engine damage. This direct-fit OEM-spec replacement takes minutes to install and delivers factory-level performance and reliability across all compatible Land Rover and Jaguar platforms. Shop Now Use code 22GET20 for 20% off any 2 items at Victorious Automotive. ✓ 30-day money-back guarantee ✓ 4.9/5 from 12,300+ reviews ✓ Worldwide DHL/FedEx/UPS shipping ✓ +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is not affiliated with or endorsed by Land Rover, Range Rover, Jaguar, or Jaguar Land Rover plc. All brand names, model designations, and vehicle specifications are the property of their respective manufacturers and are used solely for identification and compatibility purposes. This product is a third-party aftermarket component. Always verify compatibility with your vehicle's VIN or original part number before purchase. ```

```html Victorious · Cooling System · Land Rover 2.2L Turbo Diesel Water Bypass Hose OEM-spec thermostat-to-pump coolant bypass hose engineered for 2.2L TDV6 Land Rover and Jaguar platforms. Freelancer LR2 06–14 Range Rover Evoque 12+ Discovery Sport 15+ Jaguar XF 09–15 Cooling System 2.2L TDV6 Overview The 2.2L Turbo Diesel water bypass hose is a critical cooling system component found in Land Rover Freelander LR2, Range Rover Evoque, Discovery Sport L550, and Jaguar XF models equipped with the 2.2-litre turbocharged diesel engine. This hose channels coolant from the thermostat housing directly to the water pump during engine warm-up, regulating temperature control and ensuring optimal thermal management across all operating conditions. Original equipment wear—including cracking, brittleness, and internal collapse—reduces coolant flow and triggers elevated engine temperatures, limp-mode activation, and potential head gasket failure. This Partsmost OEM-equivalent replacement restores factory bypass pressure and flow characteristics, delivering the same precision fit and material durability as manufacturer stock. Direct part number compatibility with LR001311 (Land Rover OE) and AJ811151 (Jaguar cross-reference) guarantees plug-and-play installation on supported platforms. 12-month warranty included. Perfect for preventative cooling system refresh or emergency bypass hose replacement. What's Included 🔧 Water Bypass Hose Complete thermostat-to-pump hose assembly ✓ OEM Fitment Guaranteed Engineered to original equipment specifications 📋 12-Month Warranty Full manufacturer coverage included 🎯 Part Number Documentation LR001311 & AJ811151 verified cross-reference Product Highlights OEM-equivalent construction—pressure-tested hose engineered to original equipment specifications Direct fit for Freelander LR2 2006–2014 with no adapter plates or modifications required Range Rover Evoque 2012+ & Discovery Sport L550 2015+ compatible across all variants Jaguar XF 2009–2015 2.2L TDV6 cross-reference—verified AJ811151 compatibility Stabilised elastomer compound resists coolant degradation and thermal cycling Thermostat bypass flow optimisation—maintains precise engine warm-up strategy No crimped connectors—one-piece moulded design eliminates assembly failure points Rapid installation—direct replacement, existing hose clamps reusable Prevents limp mode & temperature warning lights caused by bypass blockage Perfect preventative coolant system maintenance part for high-mileage vehicles Compatibility Matrix Vehicle Year Range Engine Fitment Land Rover Freelander LR2 2006–2014 2.2L TDV6 Direct Fit Range Rover Evoque 2012–2024 2.2L TDV6 Direct Fit Land Rover Discovery Sport L550 2015–2024 2.2L TDV6 Direct Fit Jaguar XF 2009–2015 2.2L TDV6 Direct Fit Other engines / platforms Any Non-2.2L TDV6 Not Compatible Installation Notes Difficulty Level: Beginner–Intermediate | Approx. 45 minutes Drain coolant safely. Allow engine to cool, then open the radiator bleed screw (typically located on the radiator top or thermostat housing). Capture coolant in a waste container. Locate thermostat housing. On 2.2L TDV6 platforms, the thermostat housing is mounted on top of the engine block near the front. Remove the upper radiator hose clamp first if necessary for access. Disconnect old bypass hose. Release both hose clamps (typically 8–10 mm breaker bar or socket wrench). Note clamp positions for reinstallation. Disconnect the hose from the thermostat inlet and water pump outlet. Install new bypass hose. Route the new hose carefully to avoid sharp edges. Ensure it clears the alternator, power steering pump, and engine accessories. Tighten clamps evenly—do not over-tighten, as this can damage the hose spigots. Refill coolant. Open the radiator cap and pour fresh 50/50 coolant mix slowly. Bleed trapped air by opening the bleed screw until coolant flows without air bubbles. Close bleed screw, then the radiator cap. Test and inspect. Start the engine and allow it to idle for 2–3 minutes. Check for leaks around both clamps. Monitor coolant temperature gauge on the instrument cluster—should stabilise at normal running temperature (around 90°C) within 5 minutes. ⚠ Warning: Always allow the engine to cool completely before draining coolant. Never run the engine without coolant or with the radiator cap off. Do not reuse old hose clamps if they show corrosion or reduced spring tension. Replace with new stainless-steel clamps if needed. Complete Your Cooling System Refresh Original-equipment water bypass hose engineered for Land Rover Freelander LR2, Range Rover Evoque, Discovery Sport, and Jaguar XF 2.2L TDV6 platforms. Direct fit, 12-month warranty, fast shipping worldwide. Shop Now Use code 22GET20 for 20% off any 2 items ⭐ 4.9/5 from 12,300+ verified reviews 📦 Fast worldwide shipping via DHL, FedEx, UPS, TNT 💚 30-day money-back guarantee 📞 UK support Mon–Fri 9am–7pm: +44 203 943 9919 Victorious Automotive is not affiliated with, endorsed by, or associated with Land Rover, Range Rover, Jaguar Land Rover PLC, or any OEM manufacturer. All vehicle names, logos, and trademarks remain the property of their respective owners. Product descriptions and specifications are provided for compatibility reference only. Always verify fitment with your vehicle VIN before purchase. ```

Victorious · Cooling System · Engine Thermals 3.0L V6 Heater Manifold Tube with Integrated Sensor OEM-spec coolant water pipe for Discovery LR4, Range Rover, and Range Rover Sport – maintains precise engine temperature control. Discovery LR4 Range Rover L405 2013–2020 Range Rover Sport L494 2013–2020 Plastic Construction Temperature Sensor Integrated Direct OEM Replacement Why This Matters Your Range Rover or Discovery's 3.0L V6 Supercharged engine depends on precise coolant distribution. The heater manifold tube is a critical path between the engine block, heater core, and thermostat housing—any degradation, crack, or sensor failure compromises temperature regulation and cabin heating performance. This is a direct OEM-specification replacement featuring an integrated temperature sensor that communicates with your engine control unit. We've sourced this from the same precision manufacturing processes as Jaguar XF, XE, and F-PACE variants, ensuring compatibility and longevity. Whether you're facing a failed sensor reading, visible coolant weeping, or poor cabin heat, this tube restores your cooling system to factory performance standards. Comes as a pair (left and right circuits) for complete system confidence. What's Included 🔧 Pair of Heater Manifold Tubes Complete left and right circuit assembly 📡 Integrated Temperature Sensor Pre-calibrated and factory-aligned 📋 Fitment Verification Card Cross-reference all OEM part numbers 🛡️ 30-Day Guarantee Full refund if not satisfied Product Highlights OEM-equivalent engineering for Land Rover and Jaguar AJ126 3.0L Supercharged engines Integrated dual-stage temperature sensor with sealed electrical connector Engineered plastic construction withstands sustained coolant flow and thermal cycling Supports both heater circuit (cabin heating) and engine cooling circuit Precise dimensional match prevents air pockets and pressure loss Compatible with Discovery LR4, Range Rover L405, and Range Rover Sport L494 Works with Jaguar XJ, XF, XE, F-TYPE, and F-PACE variants (2013+) Fits AJ814, AJ813, and C2Z engine management variants Includes mounting brackets and seal interface points Factory-sealed connections reduce leak risk by 95% vs. aftermarket alternatives Compatibility Vehicle Year Range Fit Status Land Rover Discovery 4 (LR4) 2010–2016 Direct Fit Range Rover Vogue (L405) 2013–2020 Direct Fit Range Rover Sport (L494) 2013–2020 Direct Fit Jaguar XF (2013–2015) 2013–2015 Direct Fit Jaguar XE 2015–2020 Direct Fit Jaguar F-PACE 2015–2020 Direct Fit Jaguar F-TYPE 2013–2020 Direct Fit Range Rover Sport L461 2022+ Not Compatible Range Rover Vogue L460 2022+ Not Compatible Defender L663 2020+ Not Compatible OEM Part Numbers: LR041788 · LR075991 · LR087558 · LR109401 · LR122710 · AJ814053 · AJ814006 · AJ813848 · C2Z18624 · C2Z31644 Installation Overview Difficulty: Intermediate | Time: 2–3 hours Disconnect battery negative terminal. Always start with a cold engine (20+ minutes after shutdown). Locate the heater manifold assembly mounted on the engine's front/upper deck, near the thermostat housing. Drain coolant system into a clean container. Mark the exact coolant type (OAT, HOAT, etc.) for refill. Disconnect the electrical connector from the temperature sensor (usually blue or green housing). Remove upper and lower hose clamps securing the manifold tube to the heater core and engine block lines. Unbolt the manifold assembly (typically 2–3 M8 bolts) and withdraw carefully to avoid spilling coolant. Clean all mounting faces and hose ports with a lint-free cloth. Inspect hoses for cracks or perishing. Install new gasket seals (if supplied) onto the engine block and heater core interfaces. Position the new manifold tube assembly and align bolt holes. Insert bolts hand-tight first. Torque bolts to 20–25 Nm in a cross pattern. Do not over-tighten (risk of plastic cracking). Reconnect coolant hoses and tighten hose clamps securely (check for weeping after start-up). Connect the temperature sensor electrical connector with a firm audible click. Refill coolant system with OEM specification fluid. Bleed air by running the heater on high for 2–3 minutes. Reconnect battery, start engine, and monitor temperature gauge. Cabin heater should warm within 30 seconds. Recheck all connections after 5 minutes of idle. No steam, no pooling coolant = success. ⚠ Important: Coolant is toxic. Never dispose of used coolant down a drain—collect and take to a local recycling centre. If the temperature sensor does not seat fully, do not force it; coolant ingress into the electrical connector will cause ECU faults. Ready to Restore Cooling Confidence A failing heater manifold tube doesn't just rob you of cabin warmth—it risks engine overheat codes and reduced performance. This OEM-spec replacement puts your Discovery, Range Rover, or Jaguar back to factory precision in under three hours. Shop Heater Manifold Tube Use code 22GET20 to save 20% on any 2 cooling system parts. 30-Day Guarantee – Full refund if not satisfied Worldwide Shipping – DHL, FedEx, UPS, TNT 4.9★ Rating – 12,300+ verified reviews Expert Support – +44 203 943 9919 (Mon–Fri 9am–7pm) Disclaimer: Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or any manufacturer. All product names, logos, and brand references are used solely for fitment and compatibility identification. This product is an OEM-specification replacement part, not an original factory component. Always verify part numbers against your vehicle's documentation before purchase.

Victorious · Cooling System · Land Rover Specialist 2.2L Diesel Engine Coolant Thermostat & Housing for Land Rover Freelander LR2, Range Rover Evoque & Discovery Sport OE-spec 83°C thermostat with integrated housing—critical cooling system component engineered for Land Rover's 2.2 diesel engines. LR001312 C2S44028 2012–2015+ 2.2 Diesel Turbo Direct Fit Warranty: 12 Months Overview The thermostat is one of the most critical—yet overlooked—cooling system components on any diesel Land Rover. For owners of Freelander LR2, Range Rover Evoque, and Discovery Sport models with 2.2L TDV diesel engines, this OE-spec thermostat housing assembly maintains precise engine temperature control at 83°C, preventing both overcooling and dangerous thermal stress that can lead to head gasket failure or turbo damage. This direct-fit unit carries OE part numbers LR001312 and C2S44028, meeting Land Rover's exact thermal specifications. The precision-engineered 83°C opening temperature ensures optimal fuel economy, emissions compliance, and long-term engine reliability—especially critical for 2.2 diesel engines prone to carbon buildup and temperature fluctuations. Whether your original thermostat has failed, stuck open (causing slow warm-up), or stuck closed (engine overheating), this proven replacement restores proper coolant flow and temperature management. Installation requires no modifications and includes the full housing assembly for a complete, hassle-free fit. What's Included 🌡️ Thermostat Assembly 83°C opening temperature, OE-spec calibration 🏗️ Integrated Housing Complete housing unit, ready to install 📋 Installation Guide Step-by-step guidance included 🛡️ 12-Month Warranty Full manufacturer coverage Product Highlights OE-spec 83°C opening temperature for Land Rover 2.2 diesel engines Direct fit—no modifications, no adapters required Integrated housing assembly for complete cooling system solution Prevents overheating and cold-running damage to turbocharger Maintains optimal fuel efficiency and emissions performance Meets or exceeds original equipment specifications Precision-engineered for 2.2 TDV diesel single-turbo engines Fast warm-up cycle prevents engine stalling and carbon buildup Reduces risk of head gasket failure from thermal cycling stress 12-month manufacturer warranty with lifetime technical support Compatibility Guide Vehicle Model Years Engine Fit Status Land Rover Freelander LR2 2008–2015 2.2 TDV Diesel Direct Fit Range Rover Evoque L538 2012–2019 2.2 SD4 Diesel Direct Fit Land Rover Discovery Sport L550 2015–2024 2.2 SD4 Diesel Direct Fit Jaguar XF 2009–2015 2.2 Diesel Turbo Direct Fit Always verify your OE part number (LR001312, C2S44028, or 9657182080) before purchasing. Confirm via your VIN or original thermostat housing. If unsure, contact our team at +44 203 943 9919—we'll cross-reference in seconds. Installation Notes Difficulty Level: Intermediate | Time: 45–90 minutes Prepare your engine: Allow the engine to cool completely. Drain the cooling system into a clean container (you'll reuse this coolant if in good condition). Remove the old thermostat: Unbolt the housing from the engine block. Disconnect coolant hoses—have a catch pan ready for spillage. Install the new assembly: Position the new thermostat housing on the engine block. Ensure the gasket seats fully and evenly. Torque bolts to 20–25 Nm in a cross pattern. Reconnect coolant lines: Reattach all hoses and tighten clamps securely. Check for leaks before refilling. Refill and bleed: Pour coolant back into the radiator and overflow tank. Start the engine and allow it to reach full operating temperature. Top up as needed to remove air pockets. Test and inspect: Run the engine for 10–15 minutes. Listen for normal cooling fan cycles. Inspect all connections for weeping. Warning: Never open the radiator cap on a hot engine—risk of severe scalding. Wait until the engine is completely cold. If coolant smells sweet or you notice white smoke, stop immediately and have the system professionally inspected for head gasket failure. Ready to Restore Proper Cooling? This OE-spec thermostat is engineered for Land Rover's most demanding diesel applications. Prevent overheating, turbo damage, and expensive head gasket repairs. Order today with full 30-day money-back confidence. Shop Thermostat Assemblies Use code 22GET20 for 20% off any 2 items 4.9★ 12,300+ verified reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS shipping +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is not affiliated with, endorsed by, or associated with Land Rover, Range Rover, Jaguar Land Rover plc, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is a third-party aftermarket component engineered to OE specifications for compatibility. Always verify fitment with your vehicle's VIN before purchase.

```html Victorious · Land Rover · Cooling System Coolant Water Outlet Tube – Discovery 4, Range Rover Sport & Velar OEM-spec thermostat-to-pump hose for 3.0L V6 and 5.0L V8 petrol engines. Direct replacement, proven reliability. LR010794 / LR033994 Discovery 4 Range Rover Sport Range Rover Velar V6 / V8 Petrol 2010–2022 Overview The coolant outlet tube is a critical cooling system component that carries hot coolant from the thermostat housing directly to the water pump. On Discovery 4, Range Rover Sport, and Range Rover Velar models with 3.0L V6 and 5.0L V8 petrol engines, this hose operates under sustained pressure and temperature. Degradation—cracking, internal collapse, or perishing—leads to coolant leaks, overheating, and potential engine damage. Our replacement tube matches OEM specifications precisely, using reinforced rubber and correct diameter to withstand peak coolant temperatures and system pressure. Engineered for the front-mounted engine position across all supported Land Rover models, it seats perfectly on both thermostat and pump connections without modification. Whether you're addressing an existing leak, performing preventative maintenance, or rebuilding your cooling system, this tube delivers the durability and fit Land Rover owners expect—without the dealer markup. What's Included 🔷 Coolant Outlet Tube OEM-spec reinforced rubber assembly 📋 Installation Guide Step-by-step fitment instructions ✓ 30-Day Money-Back Guarantee Risk-free purchase protection 🔧 Lifetime Technical Support Expert advice via +44 203 943 9919 Product Highlights OEM part numbers: LR010794, LR033994, 8W93-8555-AE Front-mounted position on all petrol variants Reinforced rubber resists thermal cycling and pressure Direct fit—no adapters, modifications, or hose clamps included Rated for 3.0L V6 and 5.0L V8 petrol engines Tested on Discovery 4, Range Rover Sport 2010–2013, and Velar 2017+ Aftermarket-quality construction at fraction of dealer cost Ships with domestic courier (DHL, FedEx, UPS); worldwide delivery 12-month manufacturer warranty covers manufacturing defects Backed by 4.9★ rating from 12,300+ verified customer reviews Compatibility Chart Vehicle Model Year Range Engine Fit Discovery 4 (LR4) 2009–2016 3.0L V6 / 5.0L V8 Direct Fit Range Rover Sport L494 2010–2013 5.0L V8 Petrol Direct Fit Range Rover Sport L494 2014+ 3.0L V6 Petrol Direct Fit Range Rover Vogue L405 2010–2012 5.0L V8 Petrol Direct Fit Range Rover Velar 2017+ 3.0L V6 Petrol Direct Fit Discovery 5 2017+ 3.0L V6 Petrol Direct Fit Diesel / TDV6 / TDV8 engines Any Diesel variants Not Compatible Note: Two variant types exist. We ship randomly unless otherwise requested. Both are OEM-spec compatible. Confirm your VIN or part number before purchase for guaranteed fitment. Installation Notes Difficulty Level: Intermediate | Time: 45–90 minutes Prepare the vehicle: Park on level ground, engage handbrake, allow engine to cool fully (minimum 2 hours after shutdown). Drain coolant: Open the coolant expansion tank cap slowly to relieve pressure. Position a catch tray beneath the radiator drain plug and remove it. Allow full drain (typically 5–8 liters). Remove hose clamps: Locate the outlet tube connecting the thermostat housing (on block) to the water pump inlet. Loosen hose clamps at both ends using an appropriate sized wrench or socket. Remove old tube: Gently twist and slide the tube away from both connections. Some coolant may still be trapped—have rags ready. Inspect connection ports: Wipe thermostat and pump ports clean. Check for corrosion or debris; clean with soft cloth if necessary. Install new tube: Align the new outlet tube onto both ports. Ensure it seats fully against the ports before tightening clamps. Secure clamps: Tighten hose clamps snugly but do not over-torque; clamp bolts should be hand-tight plus one-quarter turn. Over-tightening can crack the rubber. Refill coolant: Pour fresh coolant (OEM-spec or equivalent 50:50 mix) into the expansion tank until the level reaches the "COLD" mark. Reinstall cap. Bleed air: Start the engine and allow it to idle for 2–3 minutes. Monitor coolant temperature on the dashboard. If air enters the system, you may feel a brief loss of cabin heat. Open the expansion tank cap slightly (with the engine running and only if fully cooled) to purge trapped air; top up if needed. Check for leaks: Run the engine at idle for 5 minutes. Inspect both hose connections and clamp areas for weeping or dripping. Tighten clamps incrementally if minor seeping occurs. If leaking persists, stop immediately and re-check tube seating. Road test: Drive gently for 10 minutes to bring the engine to operating temperature. Return to your workspace and re-check coolant level and clamps after a 15-minute cool-down. ⚠ Warning: Never open the coolant system while the engine is hot—pressurized coolant can cause severe burns. Always drain, work, and refill when the engine and cooling system are completely cold. If you have no experience with cooling system work, consult a qualified technician. Ready to Restore Cooling System Integrity? Stop coolant leaks before they become engine problems. Our OEM-spec outlet tube fits Discovery 4, Range Rover Sport, and Range Rover Velar perfectly—installed by you in under 90 minutes. Shop Discovery 4 Cooling Parts Shop Range Rover Sport Parts Shop Range Rover Velar Parts Use code 22GET20 for 20% off any 2 items. ⭐ 4.9/5 – 12,300+ verified reviews 🚚 Worldwide – DHL, FedEx, UPS 🛡️ 30-day money-back guarantee 📞 +44 203 943 9919 – Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket accessory specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover, Land Rover, Range Rover, or any OEM manufacturer. All product names, logos, and brands are the property of their respective owners. This product is designed for fitment reference only; verify compatibility with your specific vehicle before purchase. ```

Victorious · Discovery & Range Rover · Cooling System 3.0L V6 Diesel Oil Cooler with O-Ring Gaskets OEM-specification engine oil cooler engineered for Land Rover Discovery 4, Range Rover, and Range Rover Sport diesel powerplants—preserves thermal efficiency and engine longevity. Discovery 4 / L4 Range Rover 2013+ 3.0L TDV6 Aluminum Core OEM Gasket Set Direct Fit Overview The Discovery 4, Range Rover (L405), and Range Rover Sport (L494) depend on efficient engine oil cooling to maintain optimal thermal performance under load. Your vehicle's 3.0L turbodiesel V6 operates at higher pressures and temperatures than petrol counterparts—and a compromised oil cooler will trigger elevated engine bay temperatures, diagnostic faults, and accelerated component wear. This OEM-specification oil cooler assembly restores factory cooling capacity. Featuring a robust aluminum core design and complete gasket set (three O-ring seals, LR013151 / LR013161 / LR013162), it integrates directly into your vehicle's existing coolant and oil circuits without modification. The unit is manufactured to Land Rover specification LR013149 / LR040738 and is drop-in compatible across all mentioned platforms. Proper oil cooling extends turbocharger life, reduces thermal stress on gaskets and seals, and maintains consistent oil viscosity during extended motorway cruising or off-road work. This is a critical service item for any Discovery 4, Range Rover, or Range Rover Sport owner running the 3.0L diesel. What's Included 🔧 Oil Cooler Assembly Aluminum core, OEM-spec LR013149 ⭕ O-Ring Gasket Set (×3) LR013151, LR013161, LR013162 📋 Fitment Verification Card Part numbers & compatibility 📦 Secure Packaging DHL, FedEx, UPS, TNT ready Product Highlights OEM specification (LR013149 / LR040738) — direct fit, zero modifications Aluminum core design — lightweight, efficient heat dissipation Complete gasket set included — three O-ring seals, no additional purchases Compatible with Jaguar XF / XJ 3.0L TDV6 — broader platform support Maintains factory cooling circuit performance — no bypass or restriction Reduces thermal stress on turbocharger and gaskets — extends engine life Tested for oil pressure and coolant integrity — factory-standard flow rates 1-year manufacturer warranty — peace of mind on a critical cooling component Fits 2010–2020 Range Rover Sport, 2013+ Range Rover, and all Discovery 4 builds Engineered for UK climate and load conditions — proven reliability on motorway and off-road Compatibility Vehicle Year Range Engine Status Land Rover Discovery 4 2009–2016 3.0L TDV6 Direct Fit Range Rover (L405) 2013–2020 3.0L TDV6 Direct Fit Range Rover Sport (L494) 2014–2020 3.0L TDV6 Direct Fit Range Rover Sport (L320) 2010–2013 3.0L TDV6 Direct Fit Jaguar XF / XF Sportbrake 2011–2015 3.0L TDV6 Direct Fit Jaguar XJ 2009–2015 3.0L TDV6 Direct Fit Fitment Confirmation: Always verify part numbers (LR013149, LR040738, C2S52552, 9X2Q6B624BA) against your vehicle's original component. Contact our team via +44 203 943 9919 (Mon–Fri 9am–7pm) or message us with your VIN for 100% confirmation before ordering. Installation Notes Installation Difficulty & Time Intermediate | Approximately 2–3 hours (professional mechanic time) Required Steps Drain engine oil and coolant into clean containers. Dispose of fluids responsibly. Remove the old oil cooler assembly from its mounting bracket on the engine block. Disconnect oil inlet and outlet hoses, then coolant supply and return lines. Keep fittings clean. Remove and discard old O-ring gaskets from the mounting surface. Install new gasket set (LR013151, LR013161, LR013162) onto the cooler ports—hand-tighten only. Position new cooler assembly and secure mounting bolts to OEM torque specification (typically 8–10 Nm). Reconnect oil and coolant lines with new crush washers if worn. Refill with OEM-spec engine oil and coolant. Bleed cooling circuit and check for leaks. Run engine at idle for 5 minutes, check oil pressure gauge and temperature readout, then verify no drips. Test-drive and confirm diagnostics clear (no cooling-related fault codes). Critical: Do not reuse old O-ring gaskets. Improper seating of gaskets will cause oil weeping and potential coolant contamination. Torque specs matter—over-tightening can damage the aluminum core. Ready to Restore Thermal Efficiency? Your Discovery 4, Range Rover, or Range Rover Sport diesel engine deserves proper cooling architecture. This OEM-spec cooler with complete gasket set ensures your 3.0L TDV6 runs cool, reliable, and long. Shop Discovery 4 Parts Shop Range Rover Parts Use code 22GET20 for 20% off any 2 items. 4.9★ 12,300+ reviews 30-day money-back guarantee Worldwide DHL, FedEx, UPS, TNT +44 203 943 9919 Mon–Fri 9am–7pm Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with Land Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. All product names, trademarks, and logos referenced belong to their respective owners. This product is manufactured to OEM specification and is not an official Land Rover or JLR product. Always verify fitment with a qualified mechanic or our support team before purchase.

```html Victorious · Land Rover & Jaguar · Cooling System Parts Engine Water Pump Gasket Set – Land Rover Discovery, Range Rover & Jaguar OEM-equivalent gaskets and connectors for 3.0L V6 and 5.0L V8 engines – direct replacement, 12-month warranty. Discovery LR4 Range Rover Range Rover Sport Jaguar XF/XJ/XE/XK V6 & V8 2010–2017 Overview If you own a 2010–2017 Discovery LR4, Range Rover, Range Rover Sport, or a Jaguar with 3.0L V6 or 5.0L V8 power, cooling system reliability is non-negotiable. The water pump gasket sits at the heart of your engine's thermal regulation—it seals the junction between the water pump and engine block, preventing costly coolant leaks and overheating. This premium aftermarket gasket set delivers OEM-equivalent construction using durable, heat-resistant elastomer compounds. Each gasket is engineered to exact factory specifications and tested for immediate bolt-on compatibility. Whether you're replacing a failed seal or performing preventive maintenance, this kit includes everything needed for a complete, lasting repair. Choose between gaskets alone (2-piece set) or a comprehensive 4-piece bundle with plastic and aluminium water pump connectors—giving you total peace of mind whether you're tackling the pump housing, inlet manifold, or connector replacement in one go. What's Included 🔩 2× Water Pump Gaskets Heat-resistant elastomer, OEM equivalent 🔌 Water Pump Connector – Plastic (4-piece set option) LR028136-compatible inlet housing 🔌 Water Pump Connector – Aluminium (4-piece set option) Durable alloy construction, OE-spec 📋 Fitment Verification Guide Part numbers, vehicle codes, compatibility chart Product Highlights Direct replacement for OE part numbers LR049370, LR011562, AJ811612, AJ813609 Compatible with all 3.0L V6 and 5.0L V8 engines (2010–2017) Factory-tested heat and pressure resistance up to 120°C Includes 12-month manufacturing warranty on all gaskets Heat-resistant elastomer with reinforced edges prevents blow-out Exact thickness and bore diameter match OEM specifications Fits Discovery LR4, Range Rover, Range Rover Sport, Jaguar XF/XJ/XE/XK Professional-grade quality at competitive aftermarket pricing Compatible with water pump part numbers LR010801, LR033993, LR073711, LR097165 Choose gaskets only or complete 4-piece connector bundle Compatibility Chart Vehicle Model Year Range Engine Fit Status Land Rover Discovery LR4 2010–2016 3.0L V6 / 5.0L V8 Direct Fit Land Rover Range Rover 2010–2017 3.0L V6 / 5.0L V8 Direct Fit Land Rover Range Rover Sport 2010–2017 3.0L V6 / 5.0L V8 Direct Fit Jaguar XF (all trims) 2010–2017 3.0L V6 / 5.0L V8 Direct Fit Jaguar XJ (all trims) 2010–2017 3.0L V6 / 5.0L V8 Direct Fit Jaguar XE (all trims) 2015–2017 3.0L V6 Direct Fit Jaguar XK / XKR (all trims) 2010–2015 5.0L V8 Direct Fit Jaguar F-Type (V6 / V8) 2013–2017 3.0L V6 / 5.0L V8 Direct Fit Jaguar XFR / XJR / XKR-S 2010–2015 5.0L V8 Supercharged Direct Fit Pre-2010 or non-listed models – – Verify First ⚠ Always verify part number match before purchase. See installation guide for full fitment details. If unsure, contact us with your VIN number or part code. Installation Notes Difficulty Level: Intermediate | Time: 1.5–3 hours Drain coolant. Place drain pan beneath radiator. Open petcock or remove lower hose to drain system completely. Dispose of old coolant responsibly. Remove water pump housing bolts. Unbolt water pump from engine block using appropriate socket set. Gasket may stick—gently pry with plastic scraper. Inspect mating surfaces. Clean both engine block and pump housing with soft cloth or gasket scraper. Remove all old rubber compound and debris. Surfaces must be dry. Install new gasket. Position fresh gasket over dowel pins. Ensure correct orientation and alignment with inlet/outlet ports. Install water pump connector (if replacing). Fit new O-ring seal or connector as applicable. Secure with factory-spec bolts in cross-pattern. Torque bolts to specification. Typically 18–25 Nm for standard fasteners. Do not over-tighten; use calibrated torque wrench. Refill coolant system. Use OEM-approved coolant (typically Jaguar/Land Rover spec). Bleed air pockets by running engine at idle with radiator cap off for 2–3 minutes. Top up as needed. Test for leaks. Let engine cool. Inspect gasket interface and all connections. Start engine and monitor for drips over 15-minute run cycle. ⚠ Critical: Do not reuse old gaskets. Always replace with fresh seals. High-temperature coolant under pressure will compromise compromised or aged gasket materials. If purchasing the 4-piece set, read connector installation guide carefully—plastic and aluminium versions have different bolt patterns. Why Choose Victorious At Victorious, we specialise in premium cooling system parts for Land Rover and Jaguar enthusiasts. Every gasket and connector is tested for OEM equivalence, backed by our 12-month warranty, and covered by a 30-day money-back guarantee. We ship worldwide via DHL, FedEx, and UPS—and our 4.9★ rating across 12,300+ verified reviews speaks to our commitment to quality and service. Ready to Restore Cooling System Integrity Order your water pump gasket set today and run cool with confidence. Complete systems arrive within 3–5 business days, fully tested and ready to install. Shop Now Use code 22GET20 to save 20% on any 2 items. ✓ 30-day money-back guarantee ✓ 12-month warranty included ✓ Worldwide shipping ✓ +44 203 943 9919 Victorious Automotive is an independent aftermarket parts supplier and is not affiliated with Land Rover, Jaguar Land Rover, Jaguar Cars, or any OEM manufacturer. All product names, logos, and brand references are used for identification and compatibility purposes only. Land Rover®, Range Rover®, Defender®, and Jaguar® are registered trademarks of Jaguar Land Rover Ltd. We are not endorsed by or associated with JLR or its subsidiaries. ```

Partsmost · BMW · Cooling System Aluminium Thermostat Housing Assembly – BMW E53 E60 E63 E64 E65 E66 E70 E71 X5 X6 Direct-fit OEM-quality thermostat housing with integrated connector and O-ring. 105°C opening temperature for optimal cooling performance across premium BMW engines. E53 E60 E63 E64 E65 E66 E70 E71 BMW X5 X6 545i 550i 645i 650i 745 750 Aluminium Housing 2-Pin Connector 2002–2013 Overview This Partsmost Aluminium Thermostat Housing Assembly is engineered as a direct replacement for your BMW's cooling system. Whether you're running an X5, X6, 5-Series, 7-Series, or 6-Series, thermal regulation is critical to engine longevity and performance—especially in high-output M variants and turbocharged models. Built from precision-cast aluminium with a factory-spec opening temperature of 105°C, this assembly maintains tight coolant flow control through all driving conditions. The integrated 2-pin connector means no separate electronics sourcing, and the included O-ring ensures a perfect seal right out of the box. Backed by a 12-month warranty and OEM-grade construction, this is a no-compromise cooling system repair for any serious BMW owner. What's Included 🏠 Thermostat Housing Aluminium alloy body, OEM spec 💧 Thermostat Unit 105°C opening, integrated cartridge 🔌 2-Pin Connector Plug-and-play, no rewiring ⭕ O-Ring Seal Pre-fitted, coolant-rated Key Highlights OEM-equivalent aluminium construction 105°C opening temperature, factory-spec Front-mounted, direct bolt-in design Integrated 2-pin connector harness O-ring included; no additional sealing needed Fits X5 4.4i, 4.8i, M; X6 xDrive50i, M Fits 5-Series: 545i, 550i, 550i GT (all years) Fits 7-Series: 745i, 745Li, 750i, 750Li, 760i, 760Li Fits 6-Series: 645Ci, 650i; Alpina B7 12-month manufacturer's warranty included Compatibility Matrix BMW Model Years Fitment 545i 2004–2005 Direct Fit 550i 2006–2013 Direct Fit 550i GT / GT xDrive 2010–2013 Direct Fit 645Ci 2004–2005 Direct Fit 650i 2006–2010 Direct Fit 745i / 745Li 2002–2005 Direct Fit 750i / 750Li 2006–2011 Direct Fit 750i xDrive / 750Li xDrive 2010–2011 Direct Fit 760i / 760Li 2003–2008 Direct Fit Alpina B7 / B7 xDrive 2007–2011 Direct Fit X5 4.4i / 4.8is 2004–2006 Direct Fit X5 4.8i / xDrive48i 2007–2010 Direct Fit X5 M / xDrive50i 2010–2013 Direct Fit X6 xDrive50i 2008–2011 Direct Fit X6 M / ActiveHybrid 2010–2013 Direct Fit Before purchase: Cross-check your OEM part number (11537586885 or 11537502779) with your service records or VIN. Thermostats are generation-specific; wrong fitment can cause overheating. Installation Notes Difficulty Level: Intermediate | Time: 30–45 minutes Drain coolant from the radiator petcock (or catch tank) into a clean container. Locate the thermostat housing at the front of the engine block (consult your service manual for exact position by model). Disconnect the 2-pin connector from the old housing. Note its orientation. Remove bolts securing the housing to the block; carefully lift away. Clean the mating surface on the engine block with a lint-free cloth. Inspect for corrosion or debris. Apply a thin bead of gasket maker (optional; O-ring is typically sufficient) and position the new assembly. Torque housing bolts to spec (typically 7–10 Nm; consult your model service manual). Reconnect the 2-pin harness, ensuring the connector seats firmly. Refill coolant to the top of the expansion tank or catch bottle. Start the engine and watch for leaks around the housing for 2–3 minutes. Top up if needed. Run at operating temperature (fans cycling) and recheck coolant level. Always use fresh BMW coolant (G11, G12, or G13 depending on your year). Never mix coolant types. If you're unsure of your spec, consult your owner's manual or contact our team at +44 203 943 9919. Ready to Restore Cooling Performance? Premium BMW engines demand precision cooling. This OEM-grade thermostat assembly delivers the thermal regulation your 5, 6, 7-Series, X5, or X6 depends on—backed by Partsmost's 12-month warranty and our 30-day money-back guarantee. Add to Cart Use code 22GET20 for 20% off any 2 items 4.9★ from 12,300+ reviews 🚚 Worldwide shipping via DHL / FedEx 📞 Expert support: +44 203 943 9919 ✓ 30-day money-back guarantee Victorious Automotive is not affiliated with BMW Group, Bayerische Motoren Werke AG, or any official brand partners. All trademarks and references are for compatibility and reference purposes only. Product specifications subject to change without notice.

```html Victorious · Discovery 4 · Cooling System 3.0L V6 & 5.0L V8 Petrol Coolant Thermostat Housing OEM-spec thermostat and housing for Discovery 4, Range Rover, Range Rover Sport, Range Rover Velar, and Defender—direct fit, 12-month warranty, stable performance in all conditions. LR032135 LR035124 2010–2023 3.0L V6 & 5.0L V8 Polypropylene Housing Direct Fit Overview If you're running a Discovery 4, Range Rover (2010–2023), Range Rover Sport, Range Rover Velar, or Defender with a 3.0L V6 or 5.0L V8 petrol engine, your thermostat and housing work overtime. They regulate coolant flow to keep engine temperature in the sweet spot—critical for reliability, efficiency, and longevity. This OEM-specification thermostat housing assembly is engineered to match Land Rover and Range Rover factory standards. It's built from durable polypropylene (PP) with precision-machined sealing surfaces, ensuring zero coolant weep and consistent thermal control across all driving conditions. Whether you're replacing a worn original or upgrading preventatively, this unit delivers the same performance you'd expect from a Land Rover dealer part—at a fraction of the cost. What's Included 🔧 Complete Thermostat Housing Ready to install, no extras needed ✓ Integrated Thermostat Pre-assembled, factory calibrated 📦 Protective Packaging Padded, ready for transport 📋 12-Month Warranty Manufacturing defects covered Key Highlights OEM-specification design—matches factory performance Polypropylene housing—lightweight, corrosion-resistant Precision sealing surfaces—no coolant leaks Integrated thermostat—pre-assembled and calibrated 3.0L V6 & 5.0L V8 compatible—covers all petrol variants Factory replacement for worn originals—preventative maintenance essential Tested thermal stability—consistent coolant regulation Easy installation—direct bolt-on fit 12-month warranty—peace of mind coverage Worldwide shipping—DHL, FedEx, UPS available Compatibility Vehicle Model Year Range Engine Compatibility Discovery 4 2010–2016 3.0L V6, 5.0L V8 Direct Fit Range Rover Vogue 2010–2012 5.0L V8 Direct Fit Range Rover Vogue 2013–2023 3.0L V6, 5.0L V8 Direct Fit Range Rover Sport 2010–2013 5.0L V8 Direct Fit Range Rover Sport 2014–2023 3.0L V6, 5.0L V8 Direct Fit Range Rover Velar 2018–2023 3.0L V6 Direct Fit Defender 2020–2023 3.0L V6 Direct Fit Jaguar XF 2009–2015 3.0L V6, 5.0L V8 Direct Fit Jaguar XJ 2010–2019 3.0L V6, 5.0L V8 Direct Fit Jaguar F-Type 2014–2023 5.0L V8 Direct Fit OEM Part Numbers: LR032135 · LR035124 · LR029143 · LR023429 · LR010799 · AJ812976 · C2Z19929 Installation Notes DIY or Professional? Difficulty: Intermediate | Time: 1–2 hours | Coolant top-up required Drain coolant from radiator petcock or lower hose. Catch in a drain pan. (Dispose of responsibly; antifreeze is recyclable.) Remove upper radiator hose and coolant expansion tank if necessary to access thermostat housing. Unbolt old housing (3–4 bolts, typically 10mm or 13mm). Lift clear and set aside. Clean mating surfaces thoroughly with a rag and gasket scraper. No old sealant residue should remain. Position new thermostat housing with integrated thermostat facing the engine block. Align bolt holes. Install and torque bolts to Land Rover spec (~20–25 Nm). Do not over-tighten; cracking risk on plastic housing. Reconnect hoses and tighten clips securely. Double-check all connections. Refill coolant with a 50/50 antifreeze/distilled water mix (or OEM-approved equivalent). Bleed air from the system by running the engine on idle with the expansion tank cap off until coolant flow stabilises. Top up expansion tank to the correct level once the engine cools. Check for leaks around the new housing seams and hose connections. Run the engine to operating temperature and inspect again. ⚠ Important: Allow the engine to cool fully before beginning work. Pressurised coolant and hot metal surfaces cause severe burns. If you're unsure about any step, consult a Land Rover specialist or take the vehicle to a professional technician. Why This Thermostat Matters A worn or failed thermostat housing can cause overheating, coolant leaks, and sensor faults that trigger check-engine lights. Preventative replacement is much cheaper than dealing with engine damage. This OEM-spec assembly ensures your cooling system stays in peak condition and your engine runs reliably for years to come. Ready to Replace? Keep your cooling system in top shape. This thermostat housing is engineered to Land Rover standards and ships worldwide within 48 hours. Shop Now Use code 22GET20 for 20% off any 2 items 4.9/5 ⭐ 12,300+ reviews 30-day money-back guarantee Worldwide DHL / FedEx / UPS +44 203 943 9919 Mon–Fri 9am–7pm Victorious Automotive is an independent supplier of aftermarket and OEM parts for Land Rover, Range Rover, Defender, and related vehicles. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, JLR, the Land Rover brand, or any other manufacturer mentioned herein. All product descriptions, part numbers, and compatibility information are provided for reference only. Always verify fitment with your vehicle's VIN or consult a Land Rover specialist before purchase. Returns and refunds are subject to our terms and conditions. ```

```html Victorious · Land Rover LR2 · Cooling System Oil Cooler Outlet Radiator Hose Set for Land Rover LR2 Factory-spec coolant hoses designed to maintain optimal engine temperature and system integrity on your Land Rover Freelander LR2. LR2 L359 2008–2012 3.2L Petrol Direct Fit OE Rubber Compound Cooling System Overview The Land Rover Freelander LR2 (2008–2012) with 3.2L petrol engines relies on a precision cooling system where every hose connection matters. Over time, factory radiator hoses degrade, leak, and lose their seal—compromising coolant flow, engine temperature regulation, and overall system reliability. This Direct Replacement Radiator Hose Set restores OE performance with materials engineered to handle high-pressure coolant cycles and temperature fluctuations. Our hose set includes three factory-specification segments: oil cooler outlet line, bottom-to-water-pump inlet, and thermostat-to-radiator lower hose. Each hose is manufactured to original equipment dimensions, wall thickness, and rubber compound specification, ensuring perfect fit and durability across your LR2's cooling circuit. Whether you're replacing worn hoses as preventive maintenance or addressing a leak, this comprehensive three-piece set eliminates the need for multiple sourcing and guarantees compatibility across the entire front cooling system. Backed by a 12-month warranty and Victorious's 30-day money-back guarantee, you can install with confidence. What's Included 🔧 Oil Cooler Outlet Hose (LR005563) From oil cooler to transmission cooler inlet 💧 Lower Water Pump Inlet (LR005564) Bottom radiator to water pump inlet line 🌡️ Thermostat to Radiator Hose (LR005566) Engine thermostat housing to lower radiator ✓ All Hoses OE Specification Engineered to factory pressure and temp ratings Product Highlights Direct Replacement for OEM Hoses – No modification required OE-Grade Rubber Compound – Built for 3.2L petrol engine demands Factory Dimension & Wall Thickness – Pressure-rated for LR2 cooling circuit Three-Piece Complete Set – Oil cooler, water pump, thermostat segments High-Temperature Resistant – Handles sustained coolant flow cycles Sealed Connections – Prevents leaks and air ingress Easy Installation – No special tools or clips required 12-Month Warranty – Manufacturer defect coverage Tested for Durability – Withstands vibration and engine heat Cost-Effective vs. Separate Hoses – Save on sourcing time and shipping Compatibility Vehicle Year Range Engine OEM Part # Status Land Rover Freelander LR2 (L359) 2008–2012 3.2L Petrol LR005563 / LR005564 / LR005566 Direct Fit Volvo S60 / S80 / V60 / XC60 / XC90 2006–2015 3.2L Petrol 30774514 / 30774513 / 30774512 Compatible Land Rover LR2 (Other model years) 2007, 2013+ Any Engine — Not Compatible Range Rover Sport / Evoque / Discovery Any Any — Not Compatible ⚠️ Always verify your VIN and original part number before purchase. Send us your 17-digit VIN and we'll confirm fitment at +44 203 943 9919 (Mon–Fri 9am–7pm). Installation Guide Radiator Hose Replacement – Cooling System Service Preparation: Allow engine to cool completely. Disconnect negative battery terminal. Position drain pan under radiator. Drain Coolant: Open radiator drain plug (lower right side). Allow full drainage into container. Close drain plug when empty. Remove Old Hoses: Unbolt hose clamps at both ends using socket wrench or adjustable wrench. Gently twist and pull hoses free. Note clamp positions. Clean Connection Points: Wipe radiator, water pump inlet, and thermostat housing with lint-free cloth. Remove old rubber debris. Install New Hoses: Slip new hoses onto ports. Ensure full seating (hose should sit 1/4" from port edge). Hand-tighten clamps first. Secure Clamps: Torque hose clamps to 15–20 N·m (11–15 lb-ft). Do not over-tighten or you may crack ports. Refill Coolant: Pour recommended coolant (check owner's manual for type) until radiator is full. Start engine and allow air to bleed naturally. Final Check: Run engine for 10 minutes at idle. Check for leaks around all hose connections. Top up coolant if needed. Safety Note: Do not open radiator cap or remove hoses while engine is hot. Pressurized coolant can cause severe burns. Always work on a cold engine. Ready to Restore Your LR2's Cooling System? Don't let failing radiator hoses compromise your Land Rover's reliability. Our OE-spec hose set is engineered for your LR2 and backed by Victorious's 30-day money-back guarantee and 12-month manufacturer warranty. Shop Radiator Hose Set Save 20% on any 2 items with code 22GET20 4.9★ 12,300+ verified reviews ✓ 30-Day Money Back ✓ 12-Month Warranty ✓ Worldwide Shipping Questions? Contact us: +44 203 943 9919 (Mon–Fri 9am–7pm GMT) or email support@victorious.shop Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Jaguar Land Rover, or any affiliated brands. All vehicle names, logos, and designations are property of their respective manufacturers. This product is a third-party replacement part designed for compatibility. Always consult your vehicle's service manual or contact a certified Land Rover technician with questions about fit or installation. ```

Victorious · Cooling System · OEM Parts 2.0L Petrol Thermostat Water Outlet Connector Premium OEM-specification cooling outlet fitting for Land Rover Freelander, Range Rover Evoque, Discovery Sport, Volvo, and Ford EcoBoost engines. 2.0L Petrol Multi-Brand Compatible Direct Fit OEM Spec 12-Month Warranty Overview This thermostat water outlet connector is engineered for 2.0-litre petrol engines found across Land Rover Freelander LR2, Range Rover Evoque, Discovery Sport, Volvo V60/V70, and select Ford applications. A critical component in the cooling circuit, the outlet connector directs coolant flow between the thermostat housing and radiator hose, maintaining precise engine temperature regulation. Partsmost supplies this part to OEM specification, using high-grade materials to ensure durability and reliable performance under thermal stress. Whether you're undertaking routine cooling system maintenance or replacing a failed connector, this genuine-equivalent part delivers the integrity your Land Rover demands. Every connector undergoes quality assurance and ships with a full 12-month warranty. Direct fit to original Land Rover and Volvo equipment numbers ensures compatibility without modification or fitment risk. What's Included 📦 1x Water Outlet Connector OEM-spec cooling circuit component ✓ 12-Month Warranty Full parts coverage from Victorious 📋 Installation Guide Detailed fitment instructions included 🌍 Worldwide Shipping DHL, FedEx, UPS, TNT delivery options Product Highlights OEM Quality Material – Cast to original equipment specifications Direct Fit Design – No modification required for Land Rover, Volvo, Ford engines Thermal Durability – Engineered for sustained high-temperature cycles Lightweight Construction – Approximately 0.2kg; minimal impact on vehicle weight Multi-Brand Compatibility – Fits Freelander LR2, Evoque, Discovery Sport, Volvo V60/V70, Ford Edge/Escape/Explorer/Focus/Fusion/Taurus, Lincoln MKC/MKT/MKZ OEM Part Numbers Supported – LR025564, LR038758, 31422105, CJ5Z8K556A Fast Installation – No specialised tools required; straightforward swap procedure 12-Month Warranty – Full defect coverage; exceptional peace of mind No Chemical Hazards – Non-toxic, safe for all environments Stock Ready – Tested and inspected before dispatch Compatibility Vehicle Model Year Range Engine Fit Status Land Rover Freelander LR2 2006–2014 2.0L Petrol EcoBoost Direct Fit Range Rover Evoque 2012 Onward 2.0L Petrol Direct Fit Land Rover Discovery Sport 2015 Onward 2.0L Petrol Direct Fit Volvo V60 / V70 2010 Onward 2.0L Petrol T5 Direct Fit Volvo S60 / S80 / S80L 2010 Onward 2.0L Petrol T5 Direct Fit Ford Edge 2009–2018 2.0L EcoBoost Direct Fit Ford Escape 2008 Onward 2.0L EcoBoost Direct Fit Ford Explorer 2011 Onward 2.0L EcoBoost Direct Fit Ford Focus / Fusion / Taurus 2012 Onward 2.0L EcoBoost Direct Fit Lincoln MKC / MKT / MKZ 2013 Onward 2.0L EcoBoost Direct Fit Verify Your Part Number: Before ordering, confirm that your existing connector matches one of these OEM numbers: LR025564, LR038758, 31422105, or CJ5Z8K556A. If unsure, contact our team on +44 203 943 9919 with your VIN. Installation Thermostat Outlet Connector Replacement – 2.0L Petrol Engines Difficulty: Intermediate | Time Required: 30–45 minutes | Tools Needed: Socket set, coolant drain pan, torque wrench Drain Cooling System: Allow engine to cool completely. Open the radiator drain plug and capture coolant in a clean pan for reuse or disposal per local environmental standards. Locate Outlet Connector: The thermostat housing sits near the top of the engine block. Identify the water outlet connector—typically a small plastic or metal fitting joining the housing to the upper radiator hose. Disconnect Hose & Clamps: Loosen the radiator hose clamp and gently pull the hose free. Use a socket to remove the connector bolts (usually M12–M16, typically 20–25 Nm torque). Remove Old Connector: Carefully extract the failing connector. Clean the mating surface of the thermostat housing with a soft cloth to remove coolant residue and old gasket material. Install New Connector: Position the new Partsmost outlet connector and hand-thread the bolts. Tighten in a cross pattern to the correct torque specification (typically 20–25 Nm; refer to your vehicle's service manual). Reconnect Hose: Reattach the upper radiator hose, ensuring the clamp is seated properly. Tighten the clamp to finger-tight-plus-a-quarter-turn to avoid over-torquing. Refill Cooling System: Pour fresh coolant (or recovered original coolant) into the radiator to the proper level. Run the engine at idle for 2–3 minutes, watching for leaks around the new connector. Top up if needed. Bleed Air Pockets: Most modern cooling systems self-bleed, but if your vehicle has a bleed nipple on the thermostat housing or upper hose, crack it open briefly to expel trapped air. Test & Verify: Allow the engine to cool, then perform a final visual inspection around the connector for any seepage. Take a short test drive to confirm normal temperature gauge operation. Important: Never loosen the radiator cap or drain coolant from a warm engine—severe burns can result. Use OEM-grade coolant appropriate to your vehicle's specification. Do not mix coolant types. If the replacement connector continues to leak, stop immediately and inspect for cross-threading or internal damage. Complete Your Cooling System Upgrade Thermostat water outlet connectors fail silently and without warning, leading to coolant loss and potential engine damage. This OEM-specification replacement restores thermal integrity and prevents costly overheating repairs. Order today with confidence. Add to Cart Use code 22GET20 for 20% off any 2 items in your order. 4.9★ 12,300+ verified reviews 30-Day money-back guarantee Worldwide DHL / FedEx shipping 12-Month full warranty included Questions? Call +44 203 943 9919 (Mon–Fri, 9am–7pm GMT) Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), Ford Motor Company, Volvo Car Corporation, or Lincoln. All vehicle names, logos, and part references are used for identification purposes only. This product meets or exceeds OEM specification and is designed for compatibility with original equipment. Always verify part numbers before purchase. Your use of this product is at your own risk; we recommend professional installation by a qualified technician where appropriate.

Victorious · Land Rover / Range Rover · Cooling System Throttle Body Heater Outlet Hose & Coolant Thermostat Water Pipe OEM-specification replacement hoses for Range Rover, Range Rover Sport, Discovery 4, and Defender—engineered for reliable thermal management and proven longevity. Range Rover Range Rover Sport Discovery 4 Cooling System 2010–2022 Direct Fit What's Inside Your Kit Your Range Rover, Range Rover Sport, or Discovery 4 depends on precision cooling hoses to maintain engine temperature and protect against thermal stress. These replacement water pipes manage coolant flow to your throttle body and thermostat housing—critical under load, in cold climates, and after high-mileage use. Partsmost OEM-quality hoses meet Land Rover's original specifications and restore cooling performance. Choose either the Throttle Body Heater Outlet Hose (LR045239) or the Coolant Thermostat Water Pipe (LR049990), or select our 2-piece bundle and get both for maximum coverage. All hoses are new, unused, and backed by a 12-month warranty. Whether you're replacing a split hose, upgrading preventatively, or refreshing your cooling circuit after years of use, these parts guarantee OEM fit and durability without the Land Rover dealership markup. What's Included 🔧 Throttle Body Hose – LR045239 Direct replacement, OEM-spec silicone blend 💧 Thermostat Water Pipe – LR049990 Premium coolant transfer conduit ✓ 12-Month Warranty Manufacturing defects covered 📦 Installation Guide (Downloadable) Step-by-step reference included Key Features & Benefits Matches Land Rover OEM specifications exactly Premium silicone blend resists cracking under thermal stress Direct-fit design—no modifications required Prevents coolant leaks and overheating Proven durability across 3.0L, 5.0L V6, and V8 engines Easy DIY installation (1–2 hours with basic tools) Safer than aftermarket rubber hoses Backed by 12-month replacement warranty Tested across multiple climate zones Restores cooling performance on aged vehicles Compatibility at a Glance Vehicle / Year Range / Engine LR045239 LR049990 Range Rover 2010–2012 | 5.0L SC V8 ✓ Direct Fit ✓ Direct Fit Range Rover 2013+ | 5.0L/3.0L SC ✓ Direct Fit Not Compatible Range Rover Sport 2010–2013 | 5.0L SC V8 ✓ Direct Fit Not Compatible Range Rover Sport 2014+ | 5.0L/3.0L SC ✓ Direct Fit ✓ Direct Fit Discovery 4 (LR4) | 3.0L SC V6 ✓ Direct Fit ✓ Direct Fit Discovery 5 | 3.0L SC V6 Not Compatible ✓ Direct Fit Range Rover Velar | 3.0L/5.0L Petrol ✓ Direct Fit ✓ Direct Fit Defender 2020+ | 5.0L Petrol ✓ Direct Fit Not Compatible Tip: Always verify your VIN and engine code before purchase. Contact us at +44 203 943 9919 if unsure of compatibility—our team will confirm in under 5 minutes. Installation & Difficulty Level 🔨 Installation Overview Difficulty: Intermediate | Time Required: 1–2 hours | Tools Needed: Socket set, hose clamp pliers, fluid catch tray, coolant (if refilling) Safety First – Allow the engine to cool completely. Disconnect the negative battery terminal. Set the vehicle on a level surface and engage the handbrake. Drain Coolant (if required) – If replacing the thermostat water pipe, drain excess coolant into a catch tray to prevent spillage. Remove Old Hose – Locate the hose clamps securing the old hose to the throttle body or thermostat housing. Use a socket or clamp pliers to release them gently. Disconnect & Remove – Slide the old hose off its connections. Check the connection points for debris or damage; clean if necessary. Inspect Connection Points – Verify that fittings are clean and undamaged. Light surface corrosion can be gently brushed away. Install New Hose – Slide the new hose firmly onto the connections, ensuring it sits flush against both fittings. Secure with Clamps – Refit the hose clamps and tighten evenly with pliers or socket. Avoid over-tightening, which can crack hose barbs. Refill & Bleed – Top up coolant to the correct level. Run the engine on idle for 5–10 minutes to bleed air from the system. Check for leaks. Final Inspection – Once cool, verify clamp tightness and confirm no coolant is weeping from the connection points. ⚠️ Important: Never open a hot coolant system—pressurised coolant can cause severe burns. Always allow the engine to cool for at least 30 minutes before beginning work. Use the correct coolant type specified in your owner's manual; mixing types can reduce freeze protection and cause corrosion. Why Choose Victorious for Cooling Hoses? Unlike generic aftermarket hoses, these Partsmost OEM-spec parts are engineered to Land Rover's original standards. They've been tested in European and Middle Eastern climates, proven reliable on high-mileage vehicles, and backed by transparent warranty coverage. We've also documented tens of thousands of successful installs across Range Rover, Range Rover Sport, and Discovery platforms. Our team knows these vehicles inside out, and we stand behind every part we sell. Ready to Restore Your Cooling System? Order your replacement hoses now and restore peak cooling performance. Free worldwide shipping on all orders. 30-day money-back guarantee if you're not completely satisfied. Shop Cooling Hoses Now Use code 22GET20 to save 20% on any 2 items 🌍 Worldwide Shipping via DHL, FedEx, UPS, TNT 📞 Expert Support Mon–Fri 9am–7pm GMT ★★★★★ 4.9/5 Rating 12,300+ verified reviews ✓ 30-Day Guarantee Money-back if unsatisfied Disclaimer: Victorious Automotive is an independent aftermarket specialist and is not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Land Rover, Range Rover, or any of their subsidiaries. Product names, logos, and brand identifiers are used only for compatibility and reference purposes. All products are third-party manufactured replacements meeting or exceeding OEM specifications.

Victorious · Land Rover · Cooling System 2.0L Radiator Hose Kit for Freelander 2 LR2, Evoque & Discovery Sport OE-spec upper and lower hose assembly for 2.0L petrol engines – direct replacement with 2-year warranty. LR032347 / LR049638 2006–2015 Premium Rubber 4CYL Petrol Direct Fit Overview The cooling system in your Freelander 2, Range Rover Evoque, or Discovery Sport depends on properly functioning radiator hoses to maintain engine temperature. Over time, OE rubber hoses can crack, weaken, or develop leaks—compromising coolant flow and risking overheating. This kit supplies both upper and lower radiator hose assemblies engineered to OE specifications using durable premium rubber compounds. Each hose is manufactured to match the exact diameter, fitment points, and pressure ratings of the original equipment, ensuring drop-in installation and years of reliable service. Whether you're addressing a visible leak, responding to temperature gauge warnings, or performing preventative maintenance, this hose assembly restores your engine's cooling capacity and protects against expensive thermal damage. What's Included 📦 Upper Radiator Hose LR032347 / LR094509 – inlet assembly 📦 Lower Radiator Hose LR049638 / LR094510 – outlet with sensor ✓ Installation Guide Step-by-step alignment instructions 🛡️ 2-Year Warranty Full coverage against material defects Product Highlights OE-spec rubber compound – resists heat, pressure, and coolant chemical degradation Precision-molded fittings – exact match to factory connection points Pre-assembled connections – reduces assembly time and leak risk Temperature-rated for 120°C operation – handles peak engine cooling loads Lower hose includes coolant temperature sensor port – maintains diagnostics Alternative part numbers supplied – LR094509, LR094510 variants in stock Tested for pressure retention – withstands 1.5 bar static and dynamic cycling Fits all 4CYL 2.0L 16V petrol engines – universal across covered platforms Fast dispatch – ships within 2 working days 30-day money-back guarantee – no-questions-asked returns Compatibility Model Generation Year Range Engine Fit Freelander 2 / LR2 L359 2006–2014 2.0L Petrol Direct Fit Range Rover Evoque L538 2012–2014 2.0L Petrol Direct Fit Discovery Sport L550 2015–Present 2.0L Petrol Direct Fit Freelander 2 / LR2 L359 2006–2014 Diesel Engines Not Compatible Range Rover Evoque L551 (2019+) 2019–Present Any Engine Not Compatible Not sure of your variant? Contact us with your VIN or registration. We'll confirm fitment free of charge. Installation Notes 📋 Before You Start Difficulty: Intermediate | Time: 1–2 hours | Tools: Hose clamps, coolant drain pan, socket set Cool the engine completely – do not work on a hot cooling system. Remove radiator grille and plastic covers to access the upper hose connection at the thermostat housing. Drain coolant into a clean container – approximately 3–4 liters of fluid will spill. Disconnect the old upper hose from the thermostat housing and radiator inlet. Note hose routing. Remove the lower hose from the radiator outlet and water pump connection. Disconnect the coolant temperature sensor if fitted. Clean the threaded ports on the thermostat housing, radiator, and water pump with a lint-free cloth. Install the new upper hose – ensure it routes behind the intake manifold and does not contact hot surfaces. Attach the lower hose to the radiator outlet first, then secure at the water pump. Reconnect the temperature sensor. Tighten hose clamps gradually in a cross pattern – firm but not crushing the rubber. Refill the coolant system and bleed air from the heater by running the engine briefly at idle with the heater on. Check all connections for drips before returning the vehicle to service. ⚠️ Important: Do not overtighten hose clamps – excess compression can pinch or tear the rubber. Use OE coolant specification and refill to the cold-fill mark on the reservoir. Ready to Restore Your Cooling System? Radiator hose failure can leave you stranded. This OE-spec assembly restores your engine's thermal management in one drop-in kit – no modifications, no guesswork. Add to Cart Use code 22GET20 to save 20% when you order any 2 items. ⭐ 4.9 / 5 stars – 12,300+ verified reviews 🚚 Free worldwide shipping – DHL, FedEx, UPS, TNT ✓ 30-day money-back – no-questions-asked returns Got questions? Call +44 203 943 9919 (Mon–Fri 9am–7pm) or email our specialist team. Victorious Automotive is an independent aftermarket accessory supplier. We are not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover plc, or their official dealers. All vehicle names, logos, and trademarks are the property of their respective manufacturers and are used for identification purposes only. Our products are designed for compatibility and fit, not as OE replacements.

Victorious · Land Rover · Cooling System Parts 2.2 Diesel Turbo Oil Cooler Pipe & Water Inlet Connector OE-spec replacement for Freelander LR2, Range Rover Evoque & Discovery Sport – direct fit, tested performance. Freelander LR2 Range Rover Evoque Discovery Sport 2006–2020 2.2L TD4 Diesel Direct Replacement Overview The cooling system on your Freelander LR2, Range Rover Evoque, or Discovery Sport is engineered to manage heat under demanding conditions. The oil cooler pipe and water inlet connector are critical interfaces that regulate oil temperature and prevent overheating—especially important in turbo diesel engines running at full capacity. This OE-specification replacement connector restores original functionality if your existing unit shows signs of age, minor corrosion, or reduced cooling efficiency. Engineered to the same tolerances and materials as the factory original (OEM LR021623), it integrates seamlessly into your existing cooling circuit with zero modifications. Whether you're replacing a worn component proactively or addressing a known fault, this connector delivers reliable, consistent performance for the lifespan of your vehicle. What's Included 🔧 Oil Cooler Pipe Assembly Complete connector unit with water inlet stub ✓ Installation-Ready Pre-assembled, no modification required 📋 OE Specification Matches factory tolerances and material composition 📌 Part Numbers Included LR021623, 6G9Q6N793AA Product Highlights OE-Spec Design – Engineered to original equipment standards for Freelander LR2, Evoque, Discovery Sport 2.2L TD4 Turbo Diesel – Optimized for single-turbo applications on these engines Direct Fit Installation – No modifications, no adapters, no guesswork Proven Reliability – Aftermarket-tested and OE-quality options available Thermal Stability – Manages oil and coolant flow under full-load conditions Corrosion Resistance – Durable materials for long service life Cost-Effective Replacement – Fraction of dealer pricing, same performance Warranty Backed – 1-year manufacturer's guarantee included Easy Sourcing – Cross-referenced to multiple OEM part numbers Cooling Efficiency – Restores optimal heat dissipation immediately Compatibility & Fitment Vehicle Model Year Range Engine Fitment Land Rover Freelander 2 (LR2) 2006–2014 2.2L TD4 Single Turbo Direct Fit Range Rover Evoque 2012–2020 2.2L TD4 Single Turbo Direct Fit Land Rover Discovery Sport 2015–2020 2.2L TD4 Single Turbo Direct Fit Other engines / models N/A Non-2.2L TD4 Not Compatible ⚠ Tip: Verify your engine code and compare part number LR021623 or 6G9Q6N793AA to your existing connector before purchasing. If unsure, contact our team via +44 203 943 9919 (Mon–Fri 9am–7pm) with your vehicle's VIN. Installation Notes Difficulty Level: Intermediate | Time: 45–90 minutes Drain Engine Oil & Coolant: Allow the engine to cool completely. Open the drain plugs and catch waste fluid in a suitable container. Dispose of responsibly. Remove Existing Connector: Locate the oil cooler pipe connector on the engine block. Unbolt or unclip it (typically 2–3 fasteners). Note the hose routing before disconnection. Disconnect Hoses: Gently remove inlet and outlet hoses. Some coolant residue may drip—have clean cloths ready. Install New Connector: Position the replacement unit in the same orientation. Align mounting holes and insert bolts. Tighten firmly but do not over-torque. Reconnect Hoses: Reattach inlet and outlet hoses in their original positions. Check clamps are tight and secure. Refill Fluids: Pour fresh engine oil and coolant back into the system according to specification (refer to your service manual for correct volumes and grades). Bleed Air: Start the engine and run at idle for 2–3 minutes. Look for leaks around the new connector and hose joints. Top up coolant as needed. Test & Monitor: Drive gently for the first 10 km to confirm stable temperature readings. Check under the bonnet once more after 20 km. ⚠ Important: Do not start the engine with low coolant levels. Always dispose of used oil and coolant at a licensed recycling facility—never pour down the drain. If you're unfamiliar with cooling system work, have a qualified technician complete this job to avoid air locks or contamination. Why Choose Victorious We've been the trusted source for Land Rover, Range Rover, and Defender owners since 2014. This oil cooler connector is stocked, tested, and backed by our 30-day money-back guarantee. Our team knows these vehicles inside out—and we're here to help you keep yours in peak condition. Ready to Restore Your Cooling System? OE-spec oil cooler connector for Freelander LR2, Range Rover Evoque & Discovery Sport. Direct fit, one-year warranty, ships worldwide. Shop Now Use code 22GET20 – save 20% on any 2 items ⭐ 4.9/5 · 12,300+ Reviews 🌍 Worldwide Shipping · DHL, FedEx, UPS, TNT 📞 +44 203 943 9919 · Mon–Fri 9am–7pm ✓ 30-Day Money-Back Guarantee Disclaimer: Victorious Automotive is not affiliated with, endorsed by, or connected to Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. All product names, logos, and vehicle designations are the property of their respective owners. This product is an aftermarket replacement component designed for compatibility with the specified vehicles and is sold as-is for personal, non-commercial use.

```html Victorious · Cooling System · Repair Kit Coolant Water Pipe Repair Kit LR049990 – Range Rover Sport | Range Rover | Discovery | Velar Premium OEM-spec copper-rubber repair kit for engine coolant water pump pipes across all V6/V8 petrol Range Rovers, Discovery, and Velar. LR049990 / LR049989 2010–2017+ Copper & Rubber Direct Fit Cooling System Overview If you own a 2010–2012 Range Rover, 2014+ Range Rover Sport, 2010+ Discovery LR4, 2017+ Discovery, or 2017+ Range Rover Velar with a V6 or V8 petrol engine, you know the engine cooling system is critical to performance and longevity. The coolant water pump pipe assembly (part LR049990/LR049989) is a high-stress component, subject to constant thermal cycling and vibration from the engine bay. Over time, the rubber seals degrade, copper fittings corrode, or cracks develop in the pipe itself—leading to slow leaks, overheating, and potential engine damage. This OEM-spec repair kit restores the integrity of your cooling circuit with factory-equivalent materials and tolerances. Engineered to direct-fit your specific Range Rover, Discovery, or Velar, this kit eliminates guesswork. One kit replaces the entire water pump pipe assembly, restoring coolant flow and thermal efficiency in a single installation. No modifications. No compromise. What's Included 🔧 Water Pump Pipe Assembly Complete OEM-spec copper & rubber construction ⚡ Direct-Fit Design No cutting, adapters, or modifications required 📦 Factory Tolerances Copper & rubber materials match OEM spec ✓ 12-Month Warranty Full coverage against manufacturing defects Product Highlights OEM-equivalent copper & rubber construction—no corrosion, no brittleness Direct-fit compatibility—replaces LR049990 and LR049989 without modification Engine cooling system integration—restores full thermal efficiency and coolant flow Stable performance—rated for all V6 and V8 petrol engines across Range Rover lineup Fast installation—single assembly eliminates multiple weak points Cost-effective preventive maintenance—avoid overheating and catastrophic engine damage Quality aftermarket alternative—excellent value vs. Land Rover OEM pricing Compact, lightweight—minimal disruption to engine bay layout and spacing Tested across all compatible vehicles—thousands of installations worldwide Includes 12-month manufacturer's warranty—peace of mind on every install Compatibility Vehicle Engine Years Status Range Rover Vogue 5.0L V8 Petrol 2010–2012 Direct Fit Range Rover Sport 5.0L V8 Petrol 2014–2020 Direct Fit Discovery LR4 (Discovery 4) 3.0L V6 / 5.0L V8 2010–2016 Direct Fit Discovery (5th Gen) 3.0L V6 Petrol 2017–2022 Direct Fit Range Rover Velar 3.0L V6 Petrol 2017–2022 Direct Fit Range Rover Sport L494 3.0L V6 Petrol 2018–2020 Direct Fit All Diesel Engines TDV6 / TDV8 / P400D Any Year Not Compatible Important: This repair kit is engineered exclusively for petrol (gasoline) engines. Diesel cooling systems use different pipe tolerances and materials. Verify your engine type before ordering. Installation Guide DIY Difficulty: Moderate | Time: 1.5–2.5 hours Prepare the vehicle: Engine off, fully cooled. Disconnect the negative battery terminal. Raise the vehicle safely on a jack and secure with axle stands. Drain coolant system: Locate the coolant drain plug (underside of radiator). Place a pan beneath and drain fully. Keep coolant in a labeled container for disposal or reuse. Remove hoses and clamps: Unbolt the intake manifold cover and coolant reservoir. Disconnect all hoses feeding the water pump pipe assembly—note their position or photograph for reassembly. Remove mounting bolts: The water pump pipe assembly is secured to the engine block with 2–3 bolts. Remove these carefully and set them aside (reuse them). Extract old assembly: Gently pull the old pipe away from the engine. Take care not to damage gasket surfaces on the block. Install new assembly: Position the new repair kit onto the engine block. Align bolt holes and insert the original bolts. Torque to 20–25 Nm (15–18 ft-lbs) in a cross pattern. Reconnect hoses: Reattach all coolant hoses to their correct ports. Secure with hose clamps. Double-check all connections are hand-tight. Refill coolant: Fill the radiator and reservoir with fresh coolant (50/50 antifreeze mix). Replace the reservoir cap and run the engine at idle for 5 minutes. Check for leaks. Bleed air: Open the bleed screw on the thermostat housing (if equipped) and allow air to escape while coolant flows. Close once coolant runs clear. Final check: Monitor temperature gauge for 10 minutes at idle. Coolant should read 85–95°C. No leaks. No steam. Reconnect battery and clear any fault codes with a diagnostic tool. ⚠ Critical: Never work on a hot engine. Coolant reaches 120°C and releases under pressure—severe burns risk. Allow at least 2 hours cool-down. Dispose of old coolant responsibly at a recycling facility. Why Victorious Automotive We understand the demands placed on Range Rover, Discovery, and Velar cooling systems. Whether you're managing a high-mileage investment or preventing future problems, this repair kit represents genuine peace of mind—direct compatibility, proven reliability, and expert support from our team. Over 12,300+ verified customers trust us for Land Rover and Range Rover cooling system parts, suspension upgrades, and interior refinements. Every product ships with a 30-day money-back guarantee and worldwide DHL, FedEx, or UPS delivery. Ready to Restore Your Cooling System? Order this OEM-spec water pump pipe repair kit today and eliminate coolant leaks, overheating risk, and thermal inefficiency. Direct fit. 12-month warranty. Ships within 48 hours. Shop Now Use code 22GET20 for 20% off any 2 items. Free shipping on orders over £150 to the UK. 🔒 30-Day Money Back ⭐ 4.9 / 5 Stars 🚚 Worldwide DHL / FedEx 📞 +44 203 943 9919 Victorious Automotive is an independent aftermarket supplier of automotive parts and accessories. We are not affiliated with, endorsed by, or associated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any OEM manufacturer. Product names and part numbers reference original equipment for compatibility purposes only. Land Rover, Range Rover, Discovery, Defender, and Velar are registered trademarks of Jaguar Land Rover Ltd. All sales are subject to our terms and conditions. Installation of aftermarket parts may void original manufacturer warranties. Consult your vehicle handbook or a qualified technician before undertaking any repairs. ```

Victorious · Range Rover Sport · Cooling System 4.4L V8 Petrol Engine Oil Cooler for Range Rover & Discovery LR3 Factory-equivalent cooling capacity engineered to maintain optimal oil temperatures under load. L405 2002–2009 L494 2005–2009 Discovery LR3 4.4L V8 Petrol Aluminum Core Direct Fit OEM Quality Overview The Range Rover L405 (2002–2009), Range Rover Sport L494 (2005–2009), and Land Rover Discovery 3 LR3 are built on legendary powertrains—but they demand precision cooling. The 4.4L V8 petrol engine generates significant thermal load, especially during towing, sustained highway driving, or off-road work. Oil temperature control isn't optional; it's essential to engine longevity and performance consistency. This OEM-equivalent oil cooler restores factory cooling capacity through a precision aluminum core design and optimized flow architecture. Engineered to meet Partsmost standards, it maintains oil viscosity across driving conditions, preventing sludge buildup and protecting critical bearing surfaces. Whether you're touring the Scottish Highlands or crossing challenging terrain, controlled oil temperatures mean controlled power delivery. Direct bolt-on fitment requires no modifications. Installation is straightforward for owners with basic mechanical competence, and the 1-year warranty covers defects in manufacturing. This is genuine cooling system restoration—not a compromise. What's Included ❄️ Oil Cooler Assembly Aluminum core, factory fit 📋 Installation Guide Step-by-step instructions ✓ Fitment Check Verified for your vehicle 🔧 Hardware Kit Gaskets, fasteners included Product Highlights Aluminum Core Design – Superior heat dissipation vs. steel; lightweight, corrosion-resistant OEM-Equivalent Flow Rate – Maintains factory oil pressure and cooling performance Direct Bolt-On Fit – No adapters, modifications, or fabrication required Tested Longevity – Engineered for 150,000+ miles of consistent service Dual-Vehicle Compatibility – Fits Range Rover L405, Sport L494, and Discovery LR3 4.4L V8 Optimization – Cooler capacity sized specifically for this displacement and power output 1-Year Manufacturing Warranty – Factory defect coverage included OEM Part Number 4526544 – Cross-reference with Partsmost quality standards Cold-Start Responsive – Thermostatic design ensures rapid warm-up in winter Pressure-Tested Assembly – 100% leak-tested before shipment Compatibility Vehicle Model Code Years Engine Status Range Rover L405 2002–2009 4.4L V8 Petrol Direct Fit Range Rover Sport L494 2005–2009 4.4L V8 Petrol Direct Fit Land Rover Discovery 3 LR3 2005–2009 4.4L V8 Petrol Direct Fit Range Rover Vogue L360 1994–2002 4.6L V8 Not Compatible Range Rover Sport L320 2010+ Varies Not Compatible Verify fitment: Confirm your vehicle's model code and engine displacement before purchase. If unsure, contact us with your VIN—we'll confirm compatibility at no charge. Installation Notes Difficulty Level: Intermediate | Time: 2–3 Hours Disconnect battery negative terminal and allow engine to cool completely (minimum 1 hour). Drain coolant and oil into approved containers; dispose responsibly. Locate existing oil cooler mounted on the engine block (passenger-side lower); note inlet/outlet line positions. Disconnect hose clamps and remove fasteners holding cooler assembly to block. Carefully withdraw old cooler and inspect mounting surface for debris or damage. Clean mounting surface thoroughly with lint-free cloth; allow to air-dry. Install new gasket around mounting face; ensure even seating. Position new cooler with inlet/outlet ports aligned to original hose routes. Secure mounting bolts in criss-cross pattern; torque to 18–22 Nm (do not over-tighten). Reconnect inlet and outlet hoses; tighten clamps firmly but not excessively. Refill coolant and oil to factory specifications; bleed air from cooling circuit. Reconnect battery and run engine at idle for 5 minutes; check for leaks. ⚠️ Critical: Never work on a hot engine. Always dispose of used oil and coolant at an approved facility. Verify torque specs in your owner's manual before final installation. If oil pressure warning light persists after installation, stop and consult a qualified technician. Why Choose Victorious We specialize in Land Rover, Range Rover, and Defender cooling system restoration. Every cooler is pressure-tested, photographed, and inspected for defects before shipment. Our 4.9★ rating across 12,300+ verified reviews reflects our commitment to precision fitment and customer support. We ship worldwide via DHL, FedEx, UPS, and TNT with full tracking. And if you're not satisfied, our 30-day money-back guarantee means zero risk. Restore Factory Cooling Performance Your Range Rover or Discovery deserves precision engineering. This oil cooler is engineered to maintain oil temperature under all driving conditions, protecting your investment for years to come. Shop Oil Coolers Use code 22GET20 for 20% off any 2 items. ✓ 4.9★ Reviews from 12,300+ owners ✓ 30-Day Guarantee money-back promise ✓ Worldwide Shipping DHL, FedEx, UPS, TNT ✓ Expert Support +44 203 943 9919 Victorious Automotive is not affiliated with Land Rover, Range Rover, Jaguar Land Rover (JLR), or any official manufacturer. Product names, images, and specifications are used for reference only. All products are aftermarket or OEM-equivalent parts designed for compatibility. Refer to your vehicle's documentation and a qualified technician before installation.

Victorious · Land Rover · Cooling Systems 8-Speed Auto Transmission Oil Cooler – Range Rover | Sport | Defender | Discovery | Velar Direct-fit aluminum transmission cooler engineered to maintain optimal fluid temperatures and extend transmission lifespan across Land Rover's complete modern lineup. L405 / L494 / L663 / L538 2013–2026 Aluminum ZF 8-Speed OEM LR036354 Overview Range Rover, Range Rover Sport, Defender 110, Discovery 5, Velar, and corresponding Jaguar models equipped with ZF 8-speed automatic transmissions generate significant heat during normal operation—especially in challenging terrain, towing, or warm climates. Factory transmission fluid temperatures can exceed safe thresholds, leading to degraded fluid viscosity, accelerated wear, and reduced shift quality. This direct-fit transmission oil cooler is engineered to intercept hot fluid returning from the transmission, dissipating heat before it recirculates. By maintaining transmission fluid at an optimal operating window (typically 65–75°C), you preserve fluid integrity, improve shift response, and dramatically extend transmission service intervals. Built to OEM specification with aircraft-grade aluminum construction, this cooler is a straightforward bolt-in replacement. No modifications, no rerouting of lines. Simply drop in and protect one of your Land Rover's most critical systems. What's Included ❄️ Transmission Oil Cooler Direct-fit aluminum assembly with integrated inlet/outlet ports 📋 Mounting Hardware Grade-8 bolts, washers, and brackets pre-assembled 📖 Installation Guide Step-by-step visual instructions with torque specifications 🛡️ 30-Day Guarantee Full refund or exchange if not satisfied Key Features OEM-specification aluminum core; superior heat dissipation vs. plastic alternatives Dual-pass design maximizes fluid dwell time for optimal cooling efficiency Direct-fit design; no manifold modifications, adapter kits, or splitter plates required Compatible with OEM transmission fluid lines; existing fittings reuse without adapters Factory-tested across Range Rover L405, L460, Sport L494, L461, Defender L663, Discovery 5, Velar, and Jaguar XK/XF/XJ/F-PACE Significantly reduces transmission fluid temperature under sustained load, towing, and off-road conditions Prevents thermal cycling degradation; prolongs ATF life by 50% or more when paired with scheduled fluid changes Aluminum construction resists corrosion; powder-coated brackets provide long-term durability Compact footprint integrates seamlessly into factory underbody routing; no visible modification 1-year warranty; backed by Victorious 4.9★ customer support and 12,300+ verified reviews Compatibility Model Generation Year Range Fit Status Range Rover Vogue L405 2013–2020 Direct Fit Range Rover Vogue L460 2022–2026 Direct Fit Range Rover Sport L494 2014–2021 Direct Fit Range Rover Sport L461 2022–2026 Direct Fit Defender L663 2020–2026 Direct Fit Discovery 5 (L462) 2017–2024 Direct Fit Range Rover Velar L560 2018–2022 Direct Fit Jaguar XK C250 2015–2019 Direct Fit Jaguar XF X260 2015–2020 Direct Fit Jaguar XJ X351 2009–2019 Direct Fit Jaguar F-PACE X761 2015–2020 Direct Fit Range Rover Evoque L551 2020–2024 Consult Support Discovery Sport L550 2020–2024 Consult Support Not sure which generation you own? Text your VIN to +44 203 943 9919 (Mon–Fri 9am–7pm). We'll confirm fitment in seconds. Installation Difficulty: Intermediate | Time: 1.5–2 hours Disconnect battery negative terminal and allow engine to cool for 30 minutes minimum. Do not work on hot transmission lines. Safely raise vehicle on jack stands. Remove lower undertray fasteners to access the transmission cooler area. Locate factory transmission cooler (if equipped) or identify the main transmission fluid line loop. You may see an OEM cooler already present on some models. Disconnect fluid lines by carefully unscrewing the AN-style hose fittings. Have a small container ready to catch residual fluid (~200 ml). Immediately plug ports with rubber caps to prevent contamination. Remove mounting bolts securing the old cooler (if present) or locate mounting points. Install supplied brackets using provided Grade-8 bolts. Torque to 15 Nm. Position new cooler in the mounting brackets, ensuring it sits flush against underbody for airflow access. Secure with bolts. Reconnect fluid lines to the new cooler's inlet and outlet ports. Use new crush-washer seals on all fittings. Torque AN fittings to 22–25 Nm. Do not overtighten. Refill transmission fluid if any spilled. Check dipstick (or use BECM fluid level check on newer vehicles). Top up with OEM Jaguar Land Rover DM-24 or approved equivalent if necessary. Reinstall undertray and lower vehicle. Reconnect battery. Start engine and check for leaks around all fittings for 5 minutes at idle. No seepage = success. Drive gently for 10 km before full-throttle operation. ⚠️ Important: If you are uncomfortable working with transmission systems or have never replaced a transmission cooler, we recommend professional installation by a Land Rover specialist. Improper fitting can cause fluid loss and transmission damage. Victorious provides installation support: call +44 203 943 9919 for referrals. Why Choose Victorious We are the UK's leading independent Land Rover and Range Rover accessory specialist, trusted by 12,300+ verified owners. Every product is tested on live vehicles, every order ships via DHL/FedEx within 2 business days, and every customer receives a 30-day money-back guarantee—no questions asked. This transmission cooler is OEM-specification, engineered to ZF and Land Rover tolerances, and backed by a full 1-year warranty. Whether you're protecting a fresh L460 Vogue or keeping a classic L405 on the road, we have your transmission covered. Ready to Cool Your Transmission? Upgrade to OEM-grade thermal management and extend your transmission lifespan by decades. Shop with Victorious—premium, reliable, fast. View All Cooling Systems Use code 22GET20 for 20% off any 2 items 🚚 Worldwide DHL / FedEx shipping 🛡️ 30-day money-back guarantee ⭐ 4.9/5 from 12,300+ reviews ☎️ +44 203 943 9919 • Mon–Fri 9am–7pm Victorious Automotive is an independent aftermarket retailer and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and trademarks remain the property of their respective owners. This transmission cooler is engineered to OEM specifications and is warranted for 12 months from date of purchase. Installation voids no factory warranty when performed correctly. Consult your vehicle's service manual or a certified technician if unsure.

Victorious · Range Rover / Discovery · Cooling System 3.0 V6 Petrol Thermostat Housing with Sensor OEM-specification coolant thermostat assembly designed for seamless engine temperature regulation across multiple Land Rover and Range Rover platforms. 2010–2026 Discovery 4 · Range Rover · Sport · Velar 3.0 V6 Petrol Integrated Sensor LR062498 · LR095895 Vehicle Compatibility Overview This thermostat housing assembly fits Land Rover and Range Rover models equipped with 3.0-litre V6 petrol engines, spanning nearly two decades of production. Whether you're managing cooling efficiency on a Discovery 4, maintaining temperature control on a Range Rover Vogue or Sport, or fine-tuning thermal dynamics on a modern Velar, this component delivers the precision engineering Land Rover owners expect. The integrated digital sensor communicates real-time coolant temperature to your engine control unit, ensuring optimal fuel efficiency and emissions compliance. Factory-spec engineering means no compromises—just reliable performance in the circuit your vehicle was designed for. At Victorious, we supply genuine aftermarket thermostats that meet OEM specifications without the dealership markup. Every unit is pressure-tested and validated before dispatch, guaranteeing compatibility and longevity. What's Included 🔧 Thermostat Housing Assembly Complete unit with integrated valve mechanism 🌡️ Temperature Sensor Pre-installed, OEM-calibrated digital unit 📦 Installation Hardware Gaskets, fasteners, and mounting brackets included 📋 Technical Documentation Torque specifications and part number reference Key Features & Highlights OEM-specification engineering—meets all Land Rover factory tolerances Integrated temperature sensor—direct engine control unit compatibility Dual-valve design—optimised coolant circulation for thermal stability Polypropylene construction—lightweight, corrosion-resistant durability Pressure-tested assembly—validated before packaging 12-month manufacturer warranty—complete peace of mind coverage Fits 1–2 thermostat positions—verify your model configuration Drop-in replacement—no modifications to existing plumbing required Competitive pricing—genuine quality without dealer premium Worldwide shipping via DHL/FedEx—tracked delivery to your door Full Compatibility Matrix Vehicle Model Production Years Engine Compatibility Discovery 4 (LR4) 2010–2016 3.0 V6 Petrol TDV6 / TDV8 Direct Fit Range Rover Vogue (L405) 2013–2020 3.0 V6 Petrol Supercharged Direct Fit Range Rover Sport (L494) 2014–2020 3.0 V6 Petrol Supercharged Direct Fit Range Rover Velar (L560) 2017–2022 3.0 V6 Petrol Supercharged Direct Fit Discovery 5 (L462) 2017–2025 3.0 V6 Petrol Supercharged Direct Fit Range Rover Evoque (L551) 2019–2024 2.0 P300 / P400 Not Compatible Discovery Sport (L550) 2015–2023 2.0 P250 / P300 Not Compatible Defender 110 (L663) 2020–2026 3.0 MHEV / P400 Not Compatible Note: Always verify your vehicle's specific part number before ordering. Contact us with your VIN for definitive confirmation: +44 203 943 9919 (Mon–Fri 9am–7pm GMT). Installation Guide Difficulty Level: Intermediate | Time Required: 1.5–2 hours Disconnect battery negative terminal — Allow engine to cool fully for 30 minutes minimum before commencing work. Drain coolant system — Open petcock on radiator lower hose; capture fluid in approved waste container. Do not dispose down drain. Remove upper radiator hose — Loosen hose clamp and gently separate connection. Small coolant spillage is normal. Unbolt housing assembly — Remove three M8 bolts (torque spec: 25 Nm) connecting housing to engine block. Retain fasteners for reinstallation. Disconnect sensor wiring — Gently twist electrical connector counterclockwise; unplug from housing loom. Install new housing — Position replacement unit, ensuring gasket seats flush against engine face. Install bolts and torque to spec in diagonal sequence. Reconnect sensor — Align connector and twist clockwise until audible click confirms seating. Reattach radiator hose — Slide upper hose onto thermostat outlet; secure with original clamp. Refill coolant system — Pour approved Land Rover coolant (OAT-spec) until reservoir reaches "cold fill" line. Bleed air pockets by running engine at idle for 3 minutes. Reconnect battery and perform diagnostics — Scan for sensor faults using OBD2 device. Zero fault codes expected post-installation. ⚠️ Critical Safety Note: Never remove thermostat housing when engine is warm or running. High-pressure coolant can cause severe burns. Dispose of drained coolant responsibly—do not allow to enter water systems. If uncertain at any step, consult a qualified Land Rover technician or contact our support team. Ready to Restore Perfect Engine Cooling This thermostat assembly is the difference between efficient, comfortable driving and overheating problems that cascade into expensive damage. Genuine engineering at a fair price. Shop This Thermostat Use code 22GET20 for 20% off any 2 items ✓ 30-Day Guarantee ✓ 12-Month Warranty ✓ 4.9/5 Stars (12,300+ reviews) ✓ Worldwide Shipping Disclaimer: Victorious Automotive is an independent aftermarket supplier and is not affiliated with Land Rover, Range Rover, Jaguar Land Rover, or any OEM manufacturer. All product names, logos, and trademarks referenced are the property of their respective holders. This product is designed for compatibility with the vehicles and part numbers listed above and sold for lawful, personal use only. Always verify fitment with your vehicle's documentation before purchase.