Victorious · Multi-Vehicle · Engine Sensors
2.0L Petrol Fuel Injector Pressure Sensor – Land Rover & Jaguar
OE-grade replacement sensor for Freelander 2, Range Rover, Range Rover Sport, Range Rover Evoque, Discovery Sport, and Jaguar XF/XJ/XE/F-PACE – restores fuel system precision and engine efficiency.
Part: LR024969 / C2Z21970
2.0L Petrol Engines
2006–2019 Models
Direct Fit
OE Quality
Overview
The fuel injector pressure sensor is a critical component in modern direct-injection petrol engines, monitoring fuel rail pressure in real-time to enable precise fuel metering and combustion timing. In Land Rover Freelander 2, Range Rover, Range Rover Sport, Range Rover Evoque, Discovery Sport, and Jaguar XF, XJ, XE, and F-PACE models with 2.0L petrol engines (2006–2019), this sensor directly communicates fuel rail conditions to the engine control module, ensuring optimal performance, emissions compliance, and fuel economy.
When the fuel injector pressure sensor begins to fail—often signalled by check engine lights, poor cold starts, rough idle, or reduced power output—replacement becomes essential. Victorious supplies OE-specification sensors engineered to factory tolerances (part numbers LR024969, C2Z21970, BOSCH 0261545064, AG9E9F972AA). Each unit undergoes quality verification and ships with a 12-month warranty, backed by our 30-day money-back guarantee.
Installation is straightforward for most models, typically requiring access to the fuel rail or engine head, a 10–20 minute job for owners with basic mechanical experience. Whether you're addressing a diagnostic fault code P0190, P0191, or P0192, or preventing sensor-related issues before they degrade engine management, this replacement sensor restores full fuel system responsiveness and reliability.
What's Included
🔧
Fuel Injector Pressure Sensor
OE-grade replacement unit – factory calibrated
📋
Installation Guide
Step-by-step instructions with torque specs
⚡
Connector & Gasket
Complete hardware – ready to fit
✅
12-Month Warranty
Parts defect coverage + 30-day returns
Product Highlights
- OE-specification engineering – exact factory match for fuel rail pressure monitoring
- Compatible with 2.0L petrol engines across Land Rover and Jaguar model range
- Bosch-grade sensor technology (BOSCH 0261545064 equivalent) – proven durability
- Direct fit – no modifications or adapters required
- Addresses fault codes P0190, P0191, P0192 and related fuel system diagnostics
- Restores cold-start performance, idle quality, and fuel economy
- Operating voltage: 5V; maximum supply: 16V – full ECU compatibility
- No hazardous chemicals – clean, safe installation
- Pre-tested for leaks and electrical continuity
- Backed by Victorious 30-day money-back guarantee and global customer support
Compatibility Matrix
| Vehicle Model |
Engine |
Year Range |
Fit |
| Land Rover Freelander 2 / LR2 (L359) |
2.0L Petrol |
2006–2014 |
Direct Fit |
| Range Rover Evoque (L538) |
2.0L Petrol |
2012–2014 |
Direct Fit |
| Range Rover Evoque (L551) |
2.0L Petrol |
2019+ |
Direct Fit |
| Range Rover (L405) |
2.0L Petrol |
2013+ |
Direct Fit |
| Range Rover Sport (L494) |
2.0L Petrol |
2014+ |
Direct Fit |
| Land Rover Discovery Sport (L550) |
2.0L Petrol |
2015+ |
Direct Fit |
| Jaguar XF |
2.0L Petrol |
2009–2015 |
Direct Fit |
| Jaguar XJ |
2.0L Petrol |
2010–2019 |
Direct Fit |
| Jaguar XE |
2.0L Petrol |
2015+ |
Direct Fit |
| Jaguar F-PACE |
2.0L Petrol |
2016+ |
Direct Fit |
Verify Your Model: Part numbers LR024969, C2Z21970, BOSCH 0261545064, and AG9E9F972AA may fit additional variants. Contact our team at +44 203 943 9919 (Mon–Fri 9am–7pm) with your VIN or registration to confirm fitment before ordering.
Installation Notes
Difficulty: Intermediate | Time: 20–40 Minutes
-
Safety First: Disconnect the vehicle battery negative terminal and allow the fuel system to depressurize (engine cold). Never work on a hot fuel rail.
-
Locate Sensor: The fuel injector pressure sensor is mounted on or near the fuel rail, typically on the engine head or intake manifold. Consult your vehicle's service manual for exact location.
-
Disconnect Electrical: Unplug the sensor connector carefully – note its orientation for reinstallation.
-
Remove Old Sensor: Using the appropriate wrench or socket (typically 22mm or 27mm), unscrew the old sensor from the fuel rail. Have a clean cloth ready to catch any residual fuel.
-
Inspect Sealing Surface: Wipe the fuel rail threads clean with a lint-free cloth. Check the gasket seating area for debris or damage.
-
Install New Sensor: Thread the new sensor into the fuel rail by hand first, then tighten to the OE specification (typically 20–25 Nm / 15–18 ft-lbs). Do not over-torque – this can damage the sensor or fuel rail.
-
Reconnect Electrical: Plug in the sensor connector firmly until you hear a click. Ensure the connector is fully seated.
-
Clear Fault Codes: Reconnect the battery, start the engine, and use a diagnostic scanner to clear any stored fault codes. The vehicle may take a few start cycles to relearn fuel rail pressure parameters.
-
Test: Listen for normal idle quality, check for leaks around the sensor, and confirm that the check engine light is off after 2–3 driving cycles.
Important: Fuel is highly flammable. Do not work on the fuel system while smoking or near an open flame. If you encounter high fuel pressure or residual spray, stop work and consult a professional mechanic. Always wear safety glasses and work gloves.
Ready to Restore Fuel System Precision?
Replace your worn or failing fuel injector pressure sensor with this OE-grade unit – engineered to factory spec and backed by Victorious's reputation for quality, reliability, and expert customer support. Order today and drive with confidence.
Shop Fuel System Sensors
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ Reviews
🌍 Worldwide DHL, FedEx, UPS
✅ 30-Day Money-Back Guarantee
📞 +44 203 943 9919
Victorious Automotive is an independent specialist in Land Rover, Range Rover, Defender, and related marque accessories and components. We are not affiliated with, endorsed by, or connected to Jaguar Land Rover Limited, Jaguar Cars Limited, or any OEM manufacturer. All part numbers, specifications, and compatibility information are provided for reference only and should be verified before purchase. Customers are responsible for confirming fitment to their specific vehicle. Installation of this component may void manufacturer warranty. Consult your vehicle's service documentation or a qualified technician if unsure.
