Victorious · Freelander LR2 · Cooling System
Intercooler Inlet Manifold Hose — Freelander LR2 2.2 TDi
OEM-specification turbo-to-manifold pipe assembly with stainless steel clamps. Direct replacement for worn or leaking intercooler hoses on 2008–2014 Freelander 2.2 diesel engines.
Freelander LR2
2008–2014
2.2 TDi Diesel
OEM-Spec
Cooling System
Overview
The Land Rover Freelander LR2 2.2 TDi is renowned for its refined diesel efficiency, but the turbocharger cooling circuit is among the most critical systems to maintain. The intercooler inlet manifold hose connects the turbo's boost pressure outlet directly to the inlet manifold, managing extreme temperature and pressure conditions on every drive.
This OEM-specification intercooler hose assembly delivers genuine performance and reliability. Built to Land Rover's original equipment standards (part numbers LR066429, LR002589, LR000927), it features reinforced rubber construction with dual stainless steel hose clamps rated for sustained boost pressure and thermal cycling. Perfect as a replacement for failed, cracked, or weeping hoses that compromise turbo efficiency.
Premium aftermarket engineering means it fits your Freelander exactly as the factory intended—no modifications, no guesswork. Whether you're addressing a boost leak or preventative maintenance, this hose restores full turbo responsiveness and protects downstream engine components from pressure loss.
What's Included
🔗
Intercooler Hose Assembly
Reinforced rubber with 74mm/67mm OD connectors
🔩
Stainless Steel Clamps (×2)
Pre-installed, ready to mount
📋
Installation Guide
Step-by-step, with torque specs
✅
12-Month Warranty
Material and workmanship guarantee
Product Highlights
-
OEM-Specification Design – Engineered to Land Rover's original equipment standards
-
Reinforced Rubber Construction – Handles sustained boost pressure and thermal cycles
-
Dual Stainless Steel Clamps – Corrosion-resistant, pre-torqued for security
-
74mm / 67mm Connectors – Exact OEM outer diameters for perfect fit
-
Front-Right Lower Placement – Replaces turbine-to-manifold section precisely
-
Weight: ~1.2kg – Minimal installation mass, no structural compromise
-
Direct Replacement – No cutting, adapting, or modifications required
-
Tested for 2008–2014 Freelander 2.2 TDi – Full model-year compatibility verified
-
Quick Installation – Typically completed in under 1 hour by experienced technicians
-
Restores Turbo Efficiency – Eliminates boost leaks, maintains peak responsiveness
Compatibility
| Vehicle Model |
Year Range |
Engine |
Fit |
| Land Rover Freelander LR2 |
2008–2014 |
2.2 TDi (Single Turbo) |
Direct Fit |
| Land Rover Freelander LR2 |
2006–2007 |
2.2 TDi |
Verify OEM# |
| Land Rover Freelander 1 |
All years |
All engines |
Not Compatible |
| Range Rover Sport / Vogue |
All years |
All engines |
Not Compatible |
Part Numbers Covered: LR066429 · LR002589 · LR000927. Always verify your existing part number before ordering. Contact us with your VIN for absolute confirmation.
Installation
Difficulty: Intermediate | Time: 45–60 minutes
-
Disconnect the battery negative terminal and allow the coolant system to cool completely.
-
Locate the intercooler hose running from the turbocharger outlet to the inlet manifold (front-right lower position).
-
Remove the two stainless clamps using a 10mm or 11mm socket wrench, working gently to avoid damaging the fittings.
-
Slide the old hose away from both connectors. Some coolant residue may drip—have a catch pan ready.
-
Inspect the turbo outlet and manifold inlet for debris, scoring, or corrosion. Clean lightly with a soft cloth if needed.
-
Position the new hose assembly over both connectors, ensuring full seating at each end.
-
Reinstall the stainless steel clamps with the bolts facing downward. Torque to 12–15 Nm (9–11 lb-ft) in a cross pattern for even pressure.
-
Refill the coolant reservoir to the minimum mark and check for leaks at idle for 5 minutes.
-
Reconnect the battery and clear any engine codes using a diagnostic scanner if necessary.
⚠ Important: Work only on a cold engine. Do not loosen the intercooler hose under pressure or while the engine is running. If you detect oil or fuel contamination in the coolant system, the turbocharger may require inspection. Always dispose of old coolant responsibly.
Why Victorious?
We specialise in precision OEM-specification cooling system parts for Land Rover and Range Rover models. This intercooler hose has been selected and tested for the Freelander LR2 community because it meets the same engineering tolerances as the original equipment—no compromise on fit, durability, or turbo protection.
Every part ships with our 30-day money-back guarantee. If it doesn't perform as described, we'll refund you in full, no questions asked.
Ready to Restore Turbo Efficiency?
This OEM-spec intercooler hose eliminates boost leaks and returns your Freelander LR2 2.2 TDi to factory turbo performance. Order now with worldwide DHL shipping.
Add to Cart
Use code 22GET20 for 20% off when you buy any 2 items.
✓ 30-Day Money Back
✓ Ships Worldwide
✓ 4.9★ Trusted
✓ Expert Support
Need help? Call +44 203 943 9919 (Mon–Fri 9am–7pm) or email us anytime.
Victorious Automotive is not affiliated with Land Rover, Range Rover, or Jaguar Land Rover plc. All vehicle names, logos, and specifications are used for reference only. This product is an aftermarket component manufactured to OEM-equivalent standards and is not an official Land Rover part.
