Victorious Automotive · Range Rover Vogue L405 · Body Kits
SVO-Style Full Body Kit – Range Rover Vogue L405 (2014–2017)
A complete front-to-rear aerodynamic transformation for the L405 Vogue, engineered in OEM-grade polypropylene to deliver the commanding SVO aesthetic your Range Rover deserves.
Range Rover Vogue L405
2014–2017
SVO Style
PP Polypropylene
Full Body Kit
Front & Rear Bumpers
Door Trim
Front Grille
Direct Fit
20kg
Overview
The Range Rover Vogue L405 is one of the most recognisable luxury SUVs on the road — a vehicle that balances commanding road presence with refined British engineering. For owners who want to push that presence further without compromising the vehicle's purity of line, the SVO-style body kit offers a factory-coherent upgrade that reads as intentional rather than aftermarket.
This full kit has been developed specifically for the 2014–2017 L405 Vogue facelift generation, covering every major exterior panel zone from the front bumper assembly through to the rear valance. The material specification mirrors that used by Land Rover on original bumpers — injection-moulded polypropylene — meaning fitment tolerances, flex characteristics, and paint adhesion all behave exactly as expected on a vehicle of this calibre.
What distinguishes the SVO aesthetic is its restraint. Lower front air intakes are reshaped for improved visual mass. The rear diffuser gains definition. The grille surround sharpens the nose. Taken together, the kit doesn't shout — it focuses the L405's proportions into something more purposeful, more athletic, and undeniably more striking.
What's Included
🔲
Front Bumper Assembly
SVO-style lower fascia with integrated air intake reshaping and mounting hardware
🔳
Rear Bumper Assembly
Redesigned rear lower valance with diffuser-style detail and all fixing accessories
⬛
Front Grille Surround
SVO-spec grille frame with sharper profile and refined mesh integration
🟦
Door Trim Mouldings
Side body lower trim panels for a cohesive full-perimeter transformation
🔩
Fitting Accessories Kit
Clips, fasteners, and hardware required for clean OEM-style installation
Product Highlights
- Precision-engineered for 2014–2017 Range Rover Vogue L405 — no cutting or modification required
- OEM-grade PP polypropylene — the same material used by Land Rover on original bumper assemblies
- SVO-inspired design language that complements the L405's factory proportions
- Lightweight at just 20kg for the complete kit — no adverse effect on vehicle dynamics or fuel economy
- Full front-to-rear coverage: bumpers, grille, door trim, and accessories in a single package
- Paintable surface finish — accepts standard automotive primer and topcoat for a factory-matched result
- Matching flex characteristics to original components — no cracking or stress fractures at panel joins
- Designed for direct bolt-on fitment using existing factory mounting points and fixings
- Ships fully protected in custom-formed packaging to prevent transit damage to panel surfaces
- Available with worldwide shipping via DHL, FedEx, UPS, and TNT to over 100 countries
Compatibility
| Vehicle |
Model Code |
Year Range |
Trim Level |
Fitment |
| Range Rover Vogue |
L405 |
2014–2017 |
Vogue / SE / Autobiography |
Direct Fit |
| Range Rover Vogue |
L405 |
2013 |
Pre-facelift variants |
Verify Before Order |
| Range Rover Vogue |
L405 |
2018–2021 |
Post-facelift variants |
Not Compatible |
| Range Rover Vogue |
L460 |
2022–2026 |
All trims |
Not Compatible |
| Range Rover Sport |
L494 |
2013–2022 |
All trims |
Not Compatible |
| Range Rover Evoque |
L538 / L551 |
All years |
All trims |
Not Compatible |
Installation Notes
Difficulty: Intermediate · Estimated Time: 4–8 Hours · Professional Fit Recommended
- Before beginning, dry-fit all panels against your vehicle to confirm alignment and identify any panel-specific adjustments needed prior to painting.
- Remove existing front and rear bumper assemblies, grille surround, and door trim mouldings using appropriate trim removal tools — retain all factory clips and fixings where possible.
- Clean, prime, and paint all new panels in your chosen colour match using a quality automotive primer and basecoat/lacquer system. Allow full cure time before fitting.
- Refit the front bumper assembly using existing factory mounting points. Ensure all tab locations align before applying final fixing torque. Reconnect any fog light or sensor wiring looms.
- Install the front grille surround, clipping into the front bumper carrier and bonnet lower edge as per the original fitment method.
- Fit door trim mouldings panel by panel, working front to rear, ensuring each clip locates fully before moving to the next section.
- Install the rear bumper assembly, reconnecting any parking sensor harnesses or tow bar components as applicable. Confirm panel gaps are even before finalising all fixings.
- Conduct a final visual inspection at eye level on all four sides to confirm panel alignment, consistent shut lines, and secure fitting throughout.
⚠ Important: If your vehicle is fitted with front or rear parking sensors, tow bar electrics, or active air suspension components behind the bumper, we strongly recommend professional installation to ensure all systems are correctly reconnected and remain fully operational. Painting should be completed before fitment — do not attempt to paint panels in situ.
Elevate Your L405 Vogue
Every detail of this SVO-style kit has been considered for owners who refuse to compromise. Explore the full Range Rover Vogue L405 accessory collection — or call our team on +44 203 943 9919 (Mon–Fri, 9am–7pm) if you'd like guidance before ordering.
Shop Range Rover Vogue L405 →
Use code 22GET20 for 20% off any 2 items
⭐ 4.9/5 from 12,300+ verified reviews
🚚 Worldwide Shipping via DHL, FedEx, UPS & TNT
🔄 30-Day Money-Back Guarantee
📞 Expert Support Mon–Fri 9am–7pm
Victorious Automotive is an independent aftermarket accessory retailer. We are not affiliated with, endorsed by, or authorised by Land Rover, Jaguar Land Rover (JLR), or any of their subsidiaries. All vehicle names, model codes, and trademarks referenced are the property of their respective owners and are used solely for fitment identification purposes. Always verify compatibility with your specific vehicle specification before ordering. Professional installation is recommended for all bodywork components.
