Victorious · Land Rover · Sensors
Windshield Washer Fluid Low Level Sensor – Discovery, Range Rover Sport & Evoque
Direct replacement sensor that restores warning system reliability across Land Rover Discovery, Range Rover Sport, Evoque, and Jaguar models.
LR3 · LR4 · L320 · L494
2005–2023
Sensor · OEM Spec
Drop-In Fit
Direct Replacement
Overview
If your Discovery LR3, Discovery LR4, Range Rover Sport, or Range Rover Evoque's washer fluid warning light has stopped working—or worse, stays on permanently—the problem is almost certainly the windshield washer fluid low-level sensor. Over 15+ years of service, this sensor fails silently, leaving you either flying blind or ignored by an overactive dash light.
This is an OEM-specification replacement that restores the system to original factory reliability. It's engineered to the exact tolerances and materials Land Rover specified, meaning it integrates seamlessly with your vehicle's electronic control module without tuning or adaptation. No DIY surprises, no compatibility guessing—just the sensor your Range Rover or Discovery needs.
Fits Land Rover Discovery 3 (2005–2009), Discovery 4 (2010+), Range Rover Sport (2005–2009 L320 and 2013–2020 L494), Range Rover Evoque (2012+), Freelander LR2, Discovery Sport, and Jaguar F-Type and E-Pace models. We've verified part numbers against all major OEM references—this sensor is the real thing.
What's Included
🔧
Replacement Sensor Unit
OEM-spec, direct-fit part
📋
Installation Guide
Vehicle-specific steps & torque specs
✓
30-Day Money-Back Guarantee
Not satisfied? Full refund, no questions
📞
UK Support Line
+44 203 943 9919 (Mon–Fri 9am–7pm)
Product Highlights
- OEM-specification design matches factory tolerances exactly
- Direct replacement—no modifications or adaptations required
- Eliminates false warnings and restores accurate washer level monitoring
- Works with Land Rover's factory electronics without re-coding
- Tested for reliability across 15+ years of production models
- Compatible with both OEM and aftermarket washer reservoirs
- Sealed to prevent corrosion and electrical failure
- Covers Discovery LR3/LR4, Range Rover Sport L320/L494, Evoque, Freelander LR2
- Also fits Jaguar F-Type (2014+) and E-Pace (2017+) with same platform sensor
- 6-month warranty + 30-day money-back guarantee
Compatibility Matrix
| Vehicle Model |
Years |
Fit Status |
OEM Part Numbers |
| Discovery 3 (LR3) |
2005–2009 |
Direct Fit |
LR111378, DMI500010 |
| Range Rover Sport L320 |
2005–2009 |
Direct Fit |
DMI500010, LR142260 |
| Freelancer LR2 |
2006–2014 |
Direct Fit |
LR137547 |
| Discovery 4 (LR4) |
2010–2016 |
Direct Fit |
LR142260, LR137547 |
| Range Rover Sport L494 |
2013–2020 |
Direct Fit |
T2R7588, T2R32248 |
| Range Rover Evoque |
2012–2022 |
Direct Fit |
T2R55429, JDE26360 |
| Discovery Sport |
2015+ |
Direct Fit |
T2R55429 |
| Jaguar F-Type |
2014+ |
Direct Fit |
JDE26360, T2R32248 |
| Jaguar E-Pace |
2017+ |
Direct Fit |
T2R55429, JDE26360 |
Not sure? Send us your VIN via email or chat. We'll confirm fitment before you buy.
Installation Guide
Difficulty: Moderate | Time: 45–90 minutes
-
Locate the washer fluid reservoir – Usually under the wheel arch or behind the bumper trim (varies by model). Consult your workshop manual for exact position.
-
Disconnect the negative battery terminal – Safety first. Wait 5 minutes for residual power to drain.
-
Remove trim panels and access the reservoir – Some models require bumper removal. Clips and bolts are typically plastic or M6 steel.
-
Unplug the old sensor connector – Two-pin or three-pin connector; note the orientation before disconnecting.
-
Unscrew the sensor body – Usually 1–2 M10 bolts. Do not force; apply penetrating oil if corroded.
-
Install new sensor – Insert into reservoir from above. Align the connector socket toward the loom. Hand-tighten bolts to 8–10 Nm.
-
Reconnect the connector – Ensure it seats fully. Listen for a soft click.
-
Reassemble trim and reconnect battery – Check that the washer warning light cycles correctly during the self-test (usually 30 seconds after start-up).
-
Fill the washer reservoir – Verify the warning light turns off once fluid is above the sensor threshold.
⚠ Warning: Do not touch the sensor float mechanism—it is calibrated to OEM spec. Water ingress will cause immediate failure. If the sensor has been sitting in a damp garage, do not install it; request a replacement.
Ready to Restore Your Washer System?
Stop ignoring that warning light. Restore OEM reliability with a sensor that's built to Land Rover's original specification. Ships worldwide within 24–48 hours.
Shop Windshield Washer Sensors
Use code 22GET20 for 20% off any 2 items
4.9★ 12,300+ verified reviews
🚚 Worldwide DHL, FedEx, UPS shipping
📞 +44 203 943 9919 (Mon–Fri 9am–7pm)
✓ 30-day money-back guarantee
Victorious Automotive is not affiliated with Land Rover, Jaguar Land Rover, Jaguar Cars, or any OEM manufacturer. All vehicle names, logos, and references are used for identification and compatibility purposes only. Product descriptions and part numbers are derived from third-party databases and OEM specification sheets. Always verify fitment with your vehicle's VIN before purchase. Warranty claims must be accompanied by proof of purchase and evidence of OEM-compliant installation.
